summaryrefslogtreecommitdiff
path: root/MIBS/packetlight/SL-XPDR-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/packetlight/SL-XPDR-MIB')
-rw-r--r--MIBS/packetlight/SL-XPDR-MIB602
1 files changed, 602 insertions, 0 deletions
diff --git a/MIBS/packetlight/SL-XPDR-MIB b/MIBS/packetlight/SL-XPDR-MIB
new file mode 100644
index 0000000..8086d1c
--- /dev/null
+++ b/MIBS/packetlight/SL-XPDR-MIB
@@ -0,0 +1,602 @@
+-- *****************************************************************
+-- Transponder MIB
+-- *****************************************************************
+
+SL-XPDR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI
+ DisplayString, TruthValue,
+ TimeStamp, RowStatus FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP,
+ NOTIFICATION-GROUP FROM SNMPv2-CONF
+ InterfaceIndex FROM IF-MIB
+ PerfCurrentCount, PerfIntervalCount,
+ PerfTotalCount FROM PerfHist-TC-MIB
+ sitelight FROM SL-NE-MIB;
+
+
+slXpdr MODULE-IDENTITY
+ LAST-UPDATED "200501250000Z"
+ ORGANIZATION "PacketLight Networks Ltd."
+ CONTACT-INFO
+ "Omri_Viner@PacketLight.com"
+ DESCRIPTION
+ "This MIB module describes the optical connections."
+ ::= { sitelight 8 }
+
+--
+-- The XPDR MIB consists of the following groups:
+-- Optical Connection Table
+-- Table for ODU cross connection
+-- XPDR Last Change
+-- XPDR Traps
+--
+
+slXpdrConn OBJECT IDENTIFIER ::= { slXpdr 1 }
+-- slXpdrAps OBJECT IDENTIFIER ::= { slXpdr 2 }
+slXpdrLastChange OBJECT IDENTIFIER ::= { slXpdr 6 }
+slXpdrTraps OBJECT IDENTIFIER ::= { slXpdr 7 }
+slXpdrTraps0 OBJECT IDENTIFIER ::= { slXpdrTraps 0 }
+
+
+TsMaskBits ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "100G Tributary Slots Mask Bits 1..80."
+ SYNTAX OCTET STRING (SIZE (0..10))
+
+
+XpdrServiceType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "The service type of the tarsponder."
+ SYNTAX INTEGER {
+ ds3Sts1(1), -- DS3/STS1
+ fe(2), -- Fast Ethernet full duplex
+ escon(3), -- ESCON
+ dvbVideo(4), -- DVB ASI 270 Mbps
+ fc1gFicon(5), -- 1G FC/FICON
+ gbE(6), -- Gigabit Ethernet
+ fc2g(7), -- 2G FC/FICON
+ oc3Stm1(8), -- OC3/STM1
+ oc12Stm4(9), -- OC12/STM4
+ oc48Stm16(10), -- OC48 and GPON 2.48 Gbps
+ other(11), -- Bypass
+ fc4g(12), -- 4G FC/FICON
+ infiniband25G(13), -- InfiniBand 2.5G
+ otn27g(14), -- OC48 + FEC
+ oc24gpon(15), -- OC24/GPON 1.24G
+ smpteSdi(16), -- SMPTE SDI 540 Mbps
+ copperFe(17), -- Copper Fast Ethernet
+ copperGbe(18), -- Copper GbE
+ mux2GbE(19), -- Muxponder 2x1GBE
+ mux4GbE(20), -- Muxponder 4x1GBE
+ xpdr5G(21), -- Transponder 5G
+ ficon1g(22), -- 1G FICON
+ ficon2g(23), -- 2G FICON
+ stm1(24), -- STM1
+ stm4(25), -- STM4
+ stm16(26), -- STM16
+ gpon248(27), -- GPON 2.48 Gbps
+ ficon4g(28), -- 4G FICON
+ eth10m(29), -- 10Base-T
+ xfp10oc192(30), -- 9.95328
+ xfp10stm64(31), -- 9.95328
+ xfp10GbEWan(32), -- 9.95328 over sonet
+ xfp10GbELan(33), -- 10.3125=10.0*66/64
+ xfp10otu2(34), -- 10.709255
+ xfp10GFC(35), -- 10.51875=10.2*66/64
+ xfp10GbEWanStm64(36), -- 9.95328 over sdh
+ mux1GbE(37), -- Muxponder 1x1GBE
+ mux1GbERegen(38), -- Muxponder 1x1GBE regenerator
+ mux2GbERegen(39), -- Muxponder 2x1GBE regenerator
+ mux4GbERegen(40), -- Muxponder 4x1GBE regenerator
+ fc8g(41), -- 8G FC
+ ficon8g(42), -- 8G FICON
+ mux10GbE(43), -- Muxponder 10xGBE into 10GFC
+ syncEgbE(44), -- SyncE Gigabit Ethernet
+ noPm10GbE(45), -- 10G LAN without PM (with FEC)
+ totu2(46), -- Transparent OTU2 (no SFU)
+
+ otu1e(50), -- OTU1e
+ otu2e(51), -- OTU2e
+ otu1f(52), -- OTU1f
+ otu2f(53), -- OTU2f
+ oc192ToOtu2(54), -- OC192 mapped to OTU2 (G.709)
+ stm64ToOtu2(55), -- STM64 mapped to OTU2 (G.709)
+ gbe10WanToOtu2(56), -- 10G GBE Wan mapped to OTU2 (G.Sup43 6.1)
+ gbe10LanToOtu2A(57), -- 10G GBE Lan mapped to OTU2 (G.Sup43 6.2)
+ gbe10LanToOtu1e(58), -- 10G GBE Lan mapped to OTU1e (G.Sup43 7.2)
+ gbe10LanToOtu2e(59), -- 10G GBE Lan mapped to OTU2e (G.Sup43 7.1)
+ gbe10LanToOtu2B(60), -- 10G GBE Lan mapped to OTU2 (G.Sup43 7.3)
+ fc10LanToOtu1f(61), -- 10G FC mapped to OTU1f (like G.Sup43 7.2)
+ fc10LanToOtu2f(62), -- 10G FC mapped to OTU2f (like G.Sup43 7.1)
+ fc8LanToOtu2(63), -- 8G FC mapped to OTU2 (GFP-T)
+
+ otu3(64), -- OTU3
+ oc768(65), -- OC-768
+ stm256(66), -- STM-256
+ otu4(67), -- OTU4
+ gbe40lan(68), -- 40GBE-LAN
+ gbe100lan(69), -- 100GBE-LAN
+
+ fc16g(70), -- 16G FC/FICON
+ smpteHdSdi(71), -- HD-SDI 1.485 Gbit/s SMPTE 292M
+ smpteSdSdi(72), -- SD-SDI 270Mbit/s SMPTE 259M
+ smpte3gSdi(73), -- 3G-SDI 2.97Gbs
+ smpte3dSdi(74), -- 372 Dual link / 3D formats
+ smpteHdSdiNtsc(75), -- HD-SDI for NTSC 1.485/1.001 Gbit/s SMPTE 292M
+ smpte3gSdiNtsc(76), -- 3G-SDI for NTSC 2.97Gbs/1.001
+ fc16gNoIsl(77), -- 16G FC No ISL mode (NO PM)
+ fc32g(78), -- 32G FC
+
+ cpri1(81), -- CPRI Option 1 614.4 Mbps
+ cpri2(82), -- CPRI Option 2 1228.8 Mbps
+ cpri3(83), -- CPRI Option 3 2457.6 Mbps
+ cpri4(84), -- CPRI Option 4 3072.0 Mbps
+ cpri5(85), -- CPRI Option 5 4915.2 Mbps
+ cpri6(86), -- CPRI Option 6 6144.0 Mbps
+ cpri7(87), -- CPRI Option 7 9830.4 Mbps
+
+ enc10GbELan(91), -- Encrypted 10GbE 10.36208 Gbps
+ enc1GbELan(92), -- Encrypted 1GbE 2.125 Gbps
+ encfc1g(93), -- Encrypted 1G FC
+ encfc2g(94), -- Encrypted 2G FC
+ encfc4g(95), -- Encrypted 4G FC
+ encfc8g(96), -- Encrypted 8G FC
+ encfc16g(97), -- Encrypted 16G FC
+ encfc10g(98), -- Encrypted 10G FC
+ enc1GbE10g(99), -- Encrypted 1GbE over 10.3125 Gbps
+ encGbe40lan(100), -- Encrypted 40GBE-LAN
+ encGbe100lan(101), -- Encrypted 100GBE-LAN
+ encOtu2(102), -- Encrypted OTU2
+ encOtu2e(103), -- Encrypted OTU2e
+ encOtu3(104), -- Encrypted OTU3
+ encOtu4(105), -- Encrypted OTU4
+ encOc192(106), -- Encrypted OC-192
+ encStm64(107), -- Encrypted STM-64
+ encfc32g(108), -- Encrypted 32G FC
+ encfc16gNoIsl(110), -- Encrypted 16G FC without PM (with FEC)
+ encCpri1(111), -- Encrypted CPRI Option 1 614.4 Mbps
+ encCpri2(112), -- Encrypted CPRI Option 2 1228.8 Mbps
+ encCpri3(113), -- Encrypted CPRI Option 3 2457.6 Mbps
+ encCpri4(114), -- Encrypted CPRI Option 4 3072.0 Mbps
+ encCpri5(115), -- Encrypted CPRI Option 5 4915.2 Mbps
+ encCpri6(116), -- Encrypted CPRI Option 6 6144.0 Mbps
+ encCpri7(117), -- Encrypted CPRI Option 7 9830.4 Mbps
+ enc10GbENoPm(118), -- Encrypted 10G LAN without PM (with FEC)
+
+ otuc2(120), -- The 200G uplink
+ encOtuc2(121), -- Encrypted 200G uplink
+
+ copper10m(170), -- Copper 10Base-T Ethernet
+ copper10mAn(171), -- Copper 10Base-T Ethernet with Auto-negotiation
+ copperFeAn(1701) -- Copper Fast Ethernet with Auto-negotiation
+ }
+
+
+--
+-- The Static Transponding Connection Table
+-- This table defines the connections between the Transponding modules
+--
+
+xpdrConnConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF XpdrConnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The connection table contains for each
+ transponding connection a single bi-directional entry.
+ The index to the table is the ifIndex of both XPDR interfaces.
+ The ifType valued used for the index is: 196."
+ ::= { slXpdrConn 1 }
+
+xpdrConnConfigEntry OBJECT-TYPE
+ SYNTAX XpdrConnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the transponding connection table."
+ INDEX { xpdrConnConfigIf1,
+ xpdrConnConfigIf2 }
+ ::= { xpdrConnConfigTable 1 }
+
+XpdrConnConfigEntry ::=
+ SEQUENCE {
+ xpdrConnConfigIf1 InterfaceIndex,
+ xpdrConnConfigIf2 InterfaceIndex,
+ xpdrConnConfigRateControlAdmin INTEGER,
+ xpdrConnConfigRateControlOper INTEGER,
+ xpdrConnConfigLosPropagation TruthValue,
+ xpdrServiceType XpdrServiceType,
+ xpdrConnAddMask INTEGER,
+ xpdrMuxInbandAdmin INTEGER,
+ xpdrMuxInbandOper INTEGER,
+ xpdrDirection INTEGER,
+ xpdrConnConfigCpriRateControl TruthValue,
+ xpdrFaultPropagationDelay INTEGER,
+ xpdrFecMode INTEGER,
+ xpdrConnAddMask1 TsMaskBits,
+ xpdrConnAddMask2 TsMaskBits,
+ xpdrCryptoUser DisplayString
+ }
+
+xpdrConnConfigIf1 OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The first XPDR interface."
+ ::= { xpdrConnConfigEntry 1 }
+
+xpdrConnConfigIf2 OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The second XPDR interface."
+ ::= { xpdrConnConfigEntry 2 }
+
+xpdrConnConfigRateControlAdmin OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable ask the rate of the traffic used
+ by this interface. Frequency is in Kbp/s.
+ The value 0-30 is used for rate control Bypass."
+ ::= { xpdrConnConfigEntry 3 }
+
+xpdrConnConfigRateControlOper OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable tells the rate of the traffic used
+ by this interface. Frequency is in Kbp/s.
+ The value 0 returned for rate control Bypass."
+ ::= { xpdrConnConfigEntry 4 }
+
+xpdrConnConfigLosPropagation OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to detrmine if the LOS propagation should be active."
+ ::= { xpdrConnConfigEntry 5 }
+
+xpdrServiceType OBJECT-TYPE
+ SYNTAX XpdrServiceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The service type of the transponder."
+ ::= { xpdrConnConfigEntry 6 }
+
+xpdrConnAddMask OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is a bit mask relevant only for 10G Muxponder entry.
+ It contains a bit for each Muxponder service.
+ To add a service the management should set the corresponding bit to 1.
+ To remove a service the bit should be set to 0.
+
+ For ODU allocation, the value of xpdrConnAddMask should be set to reflect the odus/time-slots
+ provisioned for the service according to the following rules:
+ a. For ODU1 the first byte is 0; for ODU0 the first byte is 1.
+ b. The second byte. Is equal to:
+ i. The 4 bits of the first nibble correspond to Uplink 1 allocated odus counted from right to left
+ ii. The 4 bits of the second nibble correspond to Uplink 2 allocated odus counted from right to left
+ c. The Third and Forth bytes keep bit-mask of the allocated time-slots within the odu."
+ ::= { xpdrConnConfigEntry 7 }
+
+xpdrMuxInbandAdmin OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1),
+ down(2),
+ standby(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is relevant only for muxponder.
+ up value means that the muxponder inband management is enabled."
+ ::= { xpdrConnConfigEntry 8 }
+
+xpdrMuxInbandOper OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1),
+ down(2),
+ standby(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational state of the inband interface."
+ ::= { xpdrConnConfigEntry 9 }
+
+xpdrDirection OBJECT-TYPE
+ SYNTAX INTEGER {
+ bidirectional(1), -- transponder is bidierctional (default)
+ unidirectionalTx(2), -- tranponder uplink is TX and client is RX
+ unidirectionalRx(3), -- tranponder uplink is RX and client is TX
+ loopback(4) -- transponder with a single tranciever
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used for unidirectional services.
+ The upper port is the uplink as with the aps configuration.
+ The transponder on one side should be configured as TX and the peer as RX."
+ ::= { xpdrConnConfigEntry 10 }
+
+xpdrConnConfigCpriRateControl OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to detrmine if the CPRI rate control should be active."
+ ::= { xpdrConnConfigEntry 11 }
+
+xpdrFaultPropagationDelay OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to determine the fault propagation delay.
+ The value 0 mean no delay, the value 1 means 100ms delay, the value 2 means 200ms delay etc.
+ 0 is the default value."
+ ::= { xpdrConnConfigEntry 12 }
+
+xpdrFecMode OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to determine the IEEE FEC mode for 10G and 16G services:
+ 0 - No FEC (default)
+ 1 - FEC Monitoring
+ 2 - FEC Generation
+ 3 - FEC Regeneration"
+ ::= { xpdrConnConfigEntry 13 }
+
+xpdrConnAddMask1 OBJECT-TYPE
+ SYNTAX TsMaskBits
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is a bit mask relevant only for 100G Muxponder entry.
+ It contains a bit for each tributary slot allocated to the service port from Uplink 1.
+ To incluse a tributary slot the management should set the corresponding bit to 1.
+ To remove a tributary slot service the bit should be set to 0."
+ ::= { xpdrConnConfigEntry 14 }
+
+xpdrConnAddMask2 OBJECT-TYPE
+ SYNTAX TsMaskBits
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is a bit mask relevant only for 100G Muxponder entry.
+ It contains a bit for each tributary slot allocated to the service port from Uplink 2.
+ To incluse a tributary slot the management should set the corresponding bit to 1.
+ To remove a tributary slot service the bit should be set to 0.
+ This entry is relevant only for protected services."
+ ::= { xpdrConnConfigEntry 15 }
+
+xpdrCryptoUser OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The user name of the crypto officer assigned to this service.
+ Default value is Crypto"
+ ::= { xpdrConnConfigEntry 16 }
+
+
+--
+-- This table supports two cases:
+-- 1. ODU Cross Connection Table - for 10G Muxponder
+-- 2. Tributary Cross Connection - for 100G Muxponder
+--
+
+oduXcConnConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OduXcConnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description for 10G:
+ 1. The port numbers are:
+ 0 unassigned
+ 1..10 ODUs of Uplink 1
+ 11..20 ODUs of Uplink 2 (not available without 20G or 1+1 license)
+ 2. All connections are unidirectional
+ 3. P1 is the Source port and P2 is the Sync port
+ 4. Port 0 is used as P2 when P1 is dropped
+ 5. Port 0 is used as P1 when P2 is added
+ 6. In the case of APS the two mate ODUs will apear with oduXcConnConfigProtected=TRUE
+ 7. The allocation of ODUs per service port is described in xpdrConnAddMask above
+ Description for 100G:
+ The ports are the ifIndex of the tributary slots, where the path byte equals to the tributary slot."
+ ::= { slXpdrConn 2 }
+
+oduXcConnConfigEntry OBJECT-TYPE
+ SYNTAX OduXcConnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the ODU connection table.
+ An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port)."
+ INDEX { oduXcConnConfigP1,
+ oduXcConnConfigP2 }
+ ::= { oduXcConnConfigTable 1 }
+
+OduXcConnConfigEntry ::=
+ SEQUENCE {
+ oduXcConnConfigP1 INTEGER,
+ oduXcConnConfigP2 INTEGER,
+ oduXcConnConfigProtected TruthValue,
+ oduXcConnConfigRowStatus RowStatus
+ }
+
+oduXcConnConfigP1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Source port."
+ ::= { oduXcConnConfigEntry 1 }
+
+oduXcConnConfigP2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Sync port."
+ ::= { oduXcConnConfigEntry 2 }
+
+oduXcConnConfigProtected OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indication for entry with Protection Mates"
+ ::= { oduXcConnConfigEntry 3 }
+
+oduXcConnConfigRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "The Status of this connection entry."
+ ::= { oduXcConnConfigEntry 4 }
+
+--
+-- This table supports Tributary Cross Connection for 100G Muxponder ADM
+--
+
+tribXcConnConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TribXcConnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ports are:
+ For service port - the first tributary (1..80)
+ For Uplink 1 - 100 + first tributary (101..180)
+ For Uplink 2 - 200 + first tributary (201..280)"
+ ::= { slXpdrConn 3 }
+
+tribXcConnConfigEntry OBJECT-TYPE
+ SYNTAX TribXcConnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the tributary cross connection table.
+ An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port)."
+ INDEX { tribXcConnConfigP1,
+ tribXcConnConfigP2 }
+ ::= { tribXcConnConfigTable 1 }
+
+TribXcConnConfigEntry ::=
+ SEQUENCE {
+ tribXcConnConfigP1 INTEGER,
+ tribXcConnConfigP2 INTEGER,
+ tribXcConnServiceType XpdrServiceType,
+ tribXcConnMask1 TsMaskBits,
+ tribXcConnMask2 TsMaskBits,
+ tribXcConnConfigProtected TruthValue,
+ tribXcConnConfigRowStatus RowStatus
+ }
+
+tribXcConnConfigP1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Source port."
+ ::= { tribXcConnConfigEntry 1 }
+
+tribXcConnConfigP2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Sync port."
+ ::= { tribXcConnConfigEntry 2 }
+
+tribXcConnServiceType OBJECT-TYPE
+ SYNTAX XpdrServiceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The service type of the service."
+ ::= { tribXcConnConfigEntry 3 }
+
+tribXcConnMask1 OBJECT-TYPE
+ SYNTAX TsMaskBits
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is a bit mask relevant only for 100G Muxponder entry.
+ It contains a bit for each tributary slot allocated to the service port from Uplink 1.
+ To incluse a tributary slot the management should set the corresponding bit to 1.
+ To remove a tributary slot service the bit should be set to 0."
+ ::= { tribXcConnConfigEntry 4 }
+
+tribXcConnMask2 OBJECT-TYPE
+ SYNTAX TsMaskBits
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is a bit mask relevant only for 100G Muxponder entry.
+ It contains a bit for each tributary slot allocated to the service port from Uplink 2.
+ To incluse a tributary slot the management should set the corresponding bit to 1.
+ To remove a tributary slot service the bit should be set to 0.
+ This entry is relevant only for protected services."
+ ::= { tribXcConnConfigEntry 5 }
+
+tribXcConnConfigProtected OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indication for entry with Protection Mates"
+ ::= { tribXcConnConfigEntry 6 }
+
+tribXcConnConfigRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "The Status of this connection entry."
+ ::= { tribXcConnConfigEntry 7 }
+
+smmOwnerMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ gui(1), -- (default)
+ ems(2) --
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The owner of the SMM tables."
+ ::= { slXpdrConn 4 }
+
+--
+-- The traps
+--
+
+xpdrConnConfigTableChange NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A xpdrConnConfigTableChange trap is sent when the
+ content of the xpdrConnConfigTable is changed."
+ ::= { slXpdrTraps 1 }
+
+xpdrConnConfigTableChange0 NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A xpdrConnConfigTableChange trap is sent when the
+ content of the xpdrConnConfigTable is changed.
+ It is defined to support browsers that don't recognize RFC 2576."
+ ::= { slXpdrTraps0 1 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 18:42:45 +0000