Initial commitHEADmain

1 files changed, 602 insertions, 0 deletions

diff --git a/MIBS/packetlight/SL-XPDR-MIB b/MIBS/packetlight/SL-XPDR-MIB
new file mode 100644
index 0000000..8086d1c
--- /dev/null
+++ b/MIBS/packetlight/SL-XPDR-MIB
@@ -0,0 +1,602 @@
+-- *****************************************************************
+-- Transponder MIB
+-- *****************************************************************
+
+SL-XPDR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	MODULE-IDENTITY, OBJECT-TYPE,
+	NOTIFICATION-TYPE, IpAddress      	FROM SNMPv2-SMI
+	DisplayString, TruthValue, 
+	TimeStamp, RowStatus		  		FROM SNMPv2-TC
+	MODULE-COMPLIANCE, OBJECT-GROUP,
+	NOTIFICATION-GROUP                  FROM SNMPv2-CONF
+	InterfaceIndex		               	FROM IF-MIB
+	PerfCurrentCount, PerfIntervalCount,
+	PerfTotalCount                      FROM PerfHist-TC-MIB
+    sitelight			        		FROM SL-NE-MIB;
+
+
+slXpdr MODULE-IDENTITY
+	LAST-UPDATED "200501250000Z"
+	ORGANIZATION "PacketLight Networks Ltd."
+	CONTACT-INFO
+		"Omri_Viner@PacketLight.com"
+	DESCRIPTION
+		"This MIB module describes the optical connections."
+	::= { sitelight 8 }
+
+--
+--	The XPDR MIB consists of the following groups:
+--	Optical Connection Table
+--  Table for ODU cross connection
+--	XPDR Last Change
+--	XPDR Traps
+--
+
+slXpdrConn			OBJECT IDENTIFIER ::= { slXpdr 1 }
+-- slXpdrAps       	  OBJECT IDENTIFIER ::= { slXpdr 2 } 
+slXpdrLastChange	OBJECT IDENTIFIER ::= { slXpdr 6 }
+slXpdrTraps	 		OBJECT IDENTIFIER ::= { slXpdr 7 }
+slXpdrTraps0	 		OBJECT IDENTIFIER ::= { slXpdrTraps 0 }
+
+
+TsMaskBits ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "100G Tributary Slots Mask Bits 1..80."
+    SYNTAX         OCTET STRING (SIZE (0..10))
+
+
+XpdrServiceType ::= TEXTUAL-CONVENTION
+    STATUS         current
+    DESCRIPTION    "The service type of the tarsponder."
+    SYNTAX         INTEGER {
+		ds3Sts1(1),         -- DS3/STS1
+		fe(2),              -- Fast Ethernet full duplex
+		escon(3),           -- ESCON
+		dvbVideo(4),		-- DVB ASI 270 Mbps
+		fc1gFicon(5),		-- 1G FC/FICON
+		gbE(6),				-- Gigabit Ethernet
+		fc2g(7),			-- 2G FC/FICON
+		oc3Stm1(8),         -- OC3/STM1
+		oc12Stm4(9),        -- OC12/STM4
+		oc48Stm16(10),      -- OC48 and GPON 2.48 Gbps
+		other(11),			-- Bypass
+		fc4g(12),			-- 4G FC/FICON
+		infiniband25G(13),	-- InfiniBand 2.5G
+		otn27g(14),			-- OC48 + FEC
+		oc24gpon(15),		-- OC24/GPON 1.24G
+		smpteSdi(16),		-- SMPTE SDI 540 Mbps
+		copperFe(17),		-- Copper Fast Ethernet
+		copperGbe(18),		-- Copper GbE
+		mux2GbE(19), 		-- Muxponder 2x1GBE
+		mux4GbE(20),   		-- Muxponder 4x1GBE
+		xpdr5G(21),         -- Transponder 5G
+		ficon1g(22),		-- 1G FICON
+		ficon2g(23),		-- 2G FICON
+		stm1(24),         	-- STM1
+		stm4(25),       	-- STM4
+		stm16(26),      	-- STM16 
+		gpon248(27),      	-- GPON 2.48 Gbps
+		ficon4g(28),		-- 4G FICON
+		eth10m(29),			-- 10Base-T 
+		xfp10oc192(30),		-- 9.95328 
+		xfp10stm64(31),		-- 9.95328 
+		xfp10GbEWan(32),	-- 9.95328   over sonet
+		xfp10GbELan(33),	-- 10.3125=10.0*66/64 
+		xfp10otu2(34),		-- 10.709255 
+		xfp10GFC(35),		-- 10.51875=10.2*66/64 
+		xfp10GbEWanStm64(36),	-- 9.95328       over sdh
+		mux1GbE(37), 		-- Muxponder 1x1GBE
+		mux1GbERegen(38), 	-- Muxponder 1x1GBE regenerator
+		mux2GbERegen(39), 	-- Muxponder 2x1GBE regenerator
+		mux4GbERegen(40), 	-- Muxponder 4x1GBE	regenerator 
+		fc8g(41),           -- 8G FC
+		ficon8g(42),        -- 8G FICON
+		mux10GbE(43),		-- Muxponder 10xGBE into 10GFC
+		syncEgbE(44),		-- SyncE Gigabit Ethernet
+		noPm10GbE(45),		-- 10G LAN without PM (with FEC)
+		totu2(46),			-- Transparent OTU2 (no SFU)
+
+		otu1e(50),       		-- OTU1e
+		otu2e(51),       		-- OTU2e
+		otu1f(52),       		-- OTU1f
+		otu2f(53),       		-- OTU2f
+		oc192ToOtu2(54),       	-- OC192 mapped to OTU2 (G.709)
+		stm64ToOtu2(55),       	-- STM64 mapped to OTU2 (G.709)
+		gbe10WanToOtu2(56),		-- 10G GBE Wan mapped to OTU2 (G.Sup43 6.1)
+		gbe10LanToOtu2A(57),	-- 10G GBE Lan mapped to OTU2 (G.Sup43 6.2)
+		gbe10LanToOtu1e(58),	-- 10G GBE Lan mapped to OTU1e (G.Sup43 7.2)
+		gbe10LanToOtu2e(59),	-- 10G GBE Lan mapped to OTU2e (G.Sup43 7.1)
+		gbe10LanToOtu2B(60),	-- 10G GBE Lan mapped to OTU2 (G.Sup43 7.3)
+		fc10LanToOtu1f(61),		-- 10G FC mapped to OTU1f (like G.Sup43 7.2)
+		fc10LanToOtu2f(62),		-- 10G FC mapped to OTU2f (like G.Sup43 7.1)
+		fc8LanToOtu2(63),		-- 8G FC mapped to OTU2 (GFP-T)
+
+		otu3(64),				-- OTU3  
+		oc768(65),				-- OC-768
+		stm256(66),				-- STM-256
+		otu4(67),				-- OTU4  
+		gbe40lan(68),			-- 40GBE-LAN
+		gbe100lan(69),			-- 100GBE-LAN
+
+		fc16g(70),				-- 16G FC/FICON
+		smpteHdSdi(71),			-- HD-SDI 1.485 Gbit/s SMPTE 292M
+		smpteSdSdi(72),			-- SD-SDI 270Mbit/s SMPTE 259M
+		smpte3gSdi(73),			-- 3G-SDI 2.97Gbs
+		smpte3dSdi(74),			-- 372 Dual link / 3D formats
+		smpteHdSdiNtsc(75),		-- HD-SDI for NTSC 1.485/1.001 Gbit/s SMPTE 292M
+		smpte3gSdiNtsc(76),		-- 3G-SDI for NTSC 2.97Gbs/1.001 
+		fc16gNoIsl(77),			-- 16G FC No ISL mode (NO PM)
+		fc32g(78),				-- 32G FC
+
+		cpri1(81),				-- CPRI Option 1 614.4 Mbps
+		cpri2(82),				-- CPRI Option 2 1228.8 Mbps
+		cpri3(83),				-- CPRI Option 3 2457.6 Mbps
+		cpri4(84),				-- CPRI Option 4 3072.0 Mbps
+		cpri5(85),				-- CPRI Option 5 4915.2 Mbps
+		cpri6(86),				-- CPRI Option 6 6144.0 Mbps
+		cpri7(87),				-- CPRI Option 7 9830.4 Mbps
+
+		enc10GbELan(91),		-- Encrypted 10GbE 10.36208 Gbps
+		enc1GbELan(92),			-- Encrypted 1GbE 2.125 Gbps
+		encfc1g(93),			-- Encrypted 1G FC
+		encfc2g(94),			-- Encrypted 2G FC
+		encfc4g(95),			-- Encrypted 4G FC
+		encfc8g(96),			-- Encrypted 8G FC
+		encfc16g(97),			-- Encrypted 16G FC  
+		encfc10g(98),			-- Encrypted 10G FC  
+		enc1GbE10g(99),			-- Encrypted 1GbE over 10.3125 Gbps
+		encGbe40lan(100),		-- Encrypted 40GBE-LAN
+		encGbe100lan(101),		-- Encrypted 100GBE-LAN
+		encOtu2(102),			-- Encrypted OTU2 
+		encOtu2e(103),       	-- Encrypted OTU2e
+		encOtu3(104),			-- Encrypted OTU3  
+		encOtu4(105),			-- Encrypted OTU4  
+		encOc192(106),			-- Encrypted OC-192
+		encStm64(107),			-- Encrypted STM-64
+		encfc32g(108),			-- Encrypted 32G FC  
+		encfc16gNoIsl(110),		-- Encrypted 16G FC without PM (with FEC)
+		encCpri1(111),			-- Encrypted CPRI Option 1 614.4 Mbps
+		encCpri2(112),			-- Encrypted CPRI Option 2 1228.8 Mbps
+		encCpri3(113),			-- Encrypted CPRI Option 3 2457.6 Mbps
+		encCpri4(114),			-- Encrypted CPRI Option 4 3072.0 Mbps
+		encCpri5(115),			-- Encrypted CPRI Option 5 4915.2 Mbps
+		encCpri6(116),			-- Encrypted CPRI Option 6 6144.0 Mbps
+		encCpri7(117),			-- Encrypted CPRI Option 7 9830.4 Mbps
+		enc10GbENoPm(118),		-- Encrypted 10G LAN without PM (with FEC)
+
+		otuc2(120),				-- The 200G uplink
+		encOtuc2(121),			-- Encrypted 200G uplink
+				
+		copper10m(170),			-- Copper 10Base-T Ethernet
+		copper10mAn(171),		-- Copper 10Base-T Ethernet with Auto-negotiation
+		copperFeAn(1701)		-- Copper Fast Ethernet with Auto-negotiation
+    }
+
+
+--
+-- The Static Transponding Connection Table
+-- This table defines the connections between the Transponding modules
+--
+
+xpdrConnConfigTable OBJECT-TYPE
+	SYNTAX  SEQUENCE OF XpdrConnConfigEntry
+	MAX-ACCESS  		not-accessible
+	STATUS  			current 
+	DESCRIPTION
+		"The connection table contains for each
+		transponding connection a single bi-directional entry.
+		The index to the table is the ifIndex of both XPDR interfaces.
+		The ifType valued used for the index is: 196."
+	::= { slXpdrConn 1 }
+
+xpdrConnConfigEntry OBJECT-TYPE
+	SYNTAX  XpdrConnConfigEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the transponding connection table."
+	INDEX   { xpdrConnConfigIf1, 
+			  xpdrConnConfigIf2 }
+	::= { xpdrConnConfigTable 1 }
+
+XpdrConnConfigEntry ::=
+	SEQUENCE {
+		xpdrConnConfigIf1					InterfaceIndex,  
+		xpdrConnConfigIf2					InterfaceIndex,    
+		xpdrConnConfigRateControlAdmin		INTEGER,
+		xpdrConnConfigRateControlOper		INTEGER,
+		xpdrConnConfigLosPropagation		TruthValue,
+		xpdrServiceType						XpdrServiceType,
+		xpdrConnAddMask 					INTEGER,
+		xpdrMuxInbandAdmin	 				INTEGER,
+		xpdrMuxInbandOper	 				INTEGER,
+		xpdrDirection 						INTEGER,
+		xpdrConnConfigCpriRateControl		TruthValue,
+		xpdrFaultPropagationDelay			INTEGER,
+		xpdrFecMode 						INTEGER,
+		xpdrConnAddMask1 					TsMaskBits,
+		xpdrConnAddMask2 					TsMaskBits,
+		xpdrCryptoUser						DisplayString		
+	}
+
+xpdrConnConfigIf1 OBJECT-TYPE
+	SYNTAX  	InterfaceIndex
+	MAX-ACCESS  read-only
+	STATUS  	current
+	DESCRIPTION
+		"The first XPDR interface."
+	::= { xpdrConnConfigEntry 1 }
+
+xpdrConnConfigIf2 OBJECT-TYPE
+	SYNTAX  	InterfaceIndex
+	MAX-ACCESS  read-only
+	STATUS  	current
+	DESCRIPTION
+		"The second XPDR interface."
+	::= { xpdrConnConfigEntry 2 }
+
+xpdrConnConfigRateControlAdmin OBJECT-TYPE
+	SYNTAX  INTEGER
+	MAX-ACCESS  read-write
+	STATUS  	current
+	DESCRIPTION
+		"This variable ask the rate of the traffic used
+		by this interface. Frequency is in Kbp/s. 		
+		The value 0-30 is used for rate control Bypass."
+    ::= { xpdrConnConfigEntry 3 }
+
+xpdrConnConfigRateControlOper OBJECT-TYPE
+	SYNTAX  INTEGER
+	MAX-ACCESS  read-only
+	STATUS  	current
+	DESCRIPTION
+		"This variable tells the rate of the traffic used
+		by this interface. Frequency is in Kbp/s. 		
+		The value 0 returned for rate control Bypass."
+    ::= { xpdrConnConfigEntry 4 }
+
+xpdrConnConfigLosPropagation 	OBJECT-TYPE
+	SYNTAX      	TruthValue
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is used to detrmine if the LOS propagation should be active."
+	::= { xpdrConnConfigEntry 5 }
+
+xpdrServiceType 	OBJECT-TYPE
+	SYNTAX      	XpdrServiceType
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"The service type of the transponder."
+	::= { xpdrConnConfigEntry 6 }
+
+xpdrConnAddMask 	OBJECT-TYPE
+	SYNTAX      	INTEGER
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is a bit mask relevant only for 10G Muxponder entry. 
+		It contains a bit for each Muxponder service.
+		To add a service the management should set the corresponding bit to 1.
+		To remove a service the bit should be set to 0.
+		
+		For ODU allocation, the value of xpdrConnAddMask should be set to reflect the odus/time-slots 
+		provisioned for the service according to the following rules:
+		a.	For ODU1 the first byte is 0; for ODU0 the first byte is 1.
+		b.	The second byte. Is equal to:
+			i.	The 4 bits of the first nibble correspond to Uplink 1 allocated odus counted from right to left
+			ii.	The 4 bits of the second nibble correspond to Uplink 2 allocated odus counted from right to left 
+		c.	The Third and Forth bytes keep bit-mask of the allocated time-slots within the odu."
+	::= { xpdrConnConfigEntry 7 }
+
+xpdrMuxInbandAdmin 	OBJECT-TYPE
+	SYNTAX			INTEGER {
+		up(1),
+		down(2),
+		standby(3)
+	}
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is relevant only for muxponder.
+		 up value means that the muxponder inband management is enabled."
+	::= { xpdrConnConfigEntry 8 }
+
+xpdrMuxInbandOper	OBJECT-TYPE
+	SYNTAX			INTEGER {
+		up(1),
+		down(2),
+		standby(3)
+	}
+	MAX-ACCESS		read-only
+	STATUS			current
+	DESCRIPTION	
+		"The operational state of the inband interface."
+	::= { xpdrConnConfigEntry 9 }
+
+xpdrDirection 	OBJECT-TYPE
+	SYNTAX      	INTEGER {
+		bidirectional(1),		-- transponder is bidierctional (default)
+		unidirectionalTx(2),	-- tranponder uplink is TX and client is RX
+		unidirectionalRx(3),	-- tranponder uplink is RX and client is TX
+		loopback(4)				-- transponder with a single tranciever
+	}
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is used for unidirectional services.
+		The upper port is the uplink as with the aps configuration.
+		The transponder on one side should be configured as TX and the peer as RX."
+	::= { xpdrConnConfigEntry 10 }
+
+xpdrConnConfigCpriRateControl 	OBJECT-TYPE
+	SYNTAX      	TruthValue
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is used to detrmine if the CPRI rate control should be active."
+	::= { xpdrConnConfigEntry 11 }
+
+xpdrFaultPropagationDelay 	OBJECT-TYPE
+	SYNTAX      	INTEGER
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is used to determine the fault propagation delay.
+		The value 0 mean no delay, the value 1 means 100ms delay, the value 2 means 200ms delay etc.
+		0 is the default value."
+	::= { xpdrConnConfigEntry 12 }
+
+xpdrFecMode 	OBJECT-TYPE
+	SYNTAX      	INTEGER
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is used to determine the IEEE FEC mode for 10G and 16G services:
+		0 - No FEC (default)
+		1 - FEC Monitoring
+		2 - FEC Generation
+		3 - FEC Regeneration"
+	::= { xpdrConnConfigEntry 13 }
+
+xpdrConnAddMask1 	OBJECT-TYPE
+	SYNTAX      	TsMaskBits
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is a bit mask relevant only for 100G Muxponder entry. 
+		It contains a bit for each tributary slot allocated to the service port from Uplink 1.
+		To incluse a tributary slot the management should set the corresponding bit to 1.
+		To remove a tributary slot service the bit should be set to 0."
+	::= { xpdrConnConfigEntry 14 }
+
+xpdrConnAddMask2 	OBJECT-TYPE
+	SYNTAX      	TsMaskBits
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is a bit mask relevant only for 100G Muxponder entry. 
+		It contains a bit for each tributary slot allocated to the service port from Uplink 2.
+		To incluse a tributary slot the management should set the corresponding bit to 1.
+		To remove a tributary slot service the bit should be set to 0.
+		This entry is relevant only for protected services."
+	::= { xpdrConnConfigEntry 15 }
+
+xpdrCryptoUser 	OBJECT-TYPE
+	SYNTAX      	DisplayString
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"The user name of the crypto officer assigned to this service.
+		Default value is Crypto"
+	::= { xpdrConnConfigEntry 16 }
+
+
+--
+--  This table supports two cases:
+--	1. ODU Cross Connection Table - for 10G Muxponder
+--  2. Tributary Cross Connection - for 100G Muxponder
+--
+
+oduXcConnConfigTable OBJECT-TYPE
+	SYNTAX  SEQUENCE OF OduXcConnConfigEntry
+	MAX-ACCESS  		not-accessible
+	STATUS  			current 
+	DESCRIPTION
+		"Description for 10G:
+		1. The port numbers are:
+			0       unassigned 
+			1..10   ODUs of Uplink 1
+			11..20  ODUs of Uplink 2 (not available without 20G or 1+1 license)
+		2. All connections are unidirectional
+		3. P1 is the Source port and P2 is the Sync port
+		4. Port 0 is used as P2 when P1 is dropped
+		5. Port 0 is used as P1 when P2 is added
+		6. In the case of APS the two mate ODUs will apear with oduXcConnConfigProtected=TRUE
+		7. The allocation of ODUs per service port is described in xpdrConnAddMask above
+		Description for 100G:
+		The ports are the ifIndex of the tributary slots, where the path byte equals to the tributary slot."
+	::= { slXpdrConn 2 }
+
+oduXcConnConfigEntry OBJECT-TYPE
+	SYNTAX  OduXcConnConfigEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the ODU connection table. 
+		 An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port)."
+	INDEX   { oduXcConnConfigP1,
+		 	  oduXcConnConfigP2 }
+	::= { oduXcConnConfigTable 1 }
+
+OduXcConnConfigEntry ::=
+	SEQUENCE {
+		oduXcConnConfigP1					INTEGER,  
+		oduXcConnConfigP2					INTEGER,    
+		oduXcConnConfigProtected			TruthValue,
+		oduXcConnConfigRowStatus      		RowStatus        
+	}
+
+oduXcConnConfigP1 OBJECT-TYPE
+	SYNTAX  	INTEGER
+	MAX-ACCESS  read-create
+	STATUS  	current
+	DESCRIPTION
+		"The Source port."
+	::= { oduXcConnConfigEntry 1 }
+
+oduXcConnConfigP2 OBJECT-TYPE
+	SYNTAX  	INTEGER
+	MAX-ACCESS  read-create
+	STATUS  	current
+	DESCRIPTION
+		"The Sync port."
+	::= { oduXcConnConfigEntry 2 }
+
+oduXcConnConfigProtected 	OBJECT-TYPE
+	SYNTAX      	TruthValue
+	MAX-ACCESS  	read-create
+	STATUS      	current
+	DESCRIPTION
+		"Indication for entry with Protection Mates"
+	::= { oduXcConnConfigEntry 3 }
+
+oduXcConnConfigRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "The Status of this connection entry."
+      ::= { oduXcConnConfigEntry 4 }
+
+--
+--  This table supports Tributary Cross Connection for 100G Muxponder ADM
+--
+
+tribXcConnConfigTable OBJECT-TYPE
+	SYNTAX  SEQUENCE OF TribXcConnConfigEntry
+	MAX-ACCESS  		not-accessible
+	STATUS  			current 
+	DESCRIPTION
+		"The ports are:
+			For service port - the first tributary (1..80)
+			For Uplink 1 - 100 + first tributary (101..180)
+			For Uplink 2 - 200 + first tributary (201..280)"
+	::= { slXpdrConn 3 }
+
+tribXcConnConfigEntry OBJECT-TYPE
+	SYNTAX  TribXcConnConfigEntry
+	MAX-ACCESS  not-accessible
+	STATUS  current
+	DESCRIPTION
+		"An entry in the tributary cross connection table. 
+		 An entry describes uni-directional connection of traffic from P1 (Source port) to port P2 (Sync port)."
+	INDEX   { tribXcConnConfigP1,
+		 	  tribXcConnConfigP2 }
+	::= { tribXcConnConfigTable 1 }
+
+TribXcConnConfigEntry ::=
+	SEQUENCE {
+		tribXcConnConfigP1					INTEGER,  
+		tribXcConnConfigP2					INTEGER,    
+		tribXcConnServiceType				XpdrServiceType,
+		tribXcConnMask1 					TsMaskBits,
+		tribXcConnMask2 					TsMaskBits,
+		tribXcConnConfigProtected			TruthValue,
+		tribXcConnConfigRowStatus      		RowStatus        
+	}
+
+tribXcConnConfigP1 OBJECT-TYPE
+	SYNTAX  	INTEGER
+	MAX-ACCESS  read-create
+	STATUS  	current
+	DESCRIPTION
+		"The Source port."
+	::= { tribXcConnConfigEntry 1 }
+
+tribXcConnConfigP2 OBJECT-TYPE
+	SYNTAX  	INTEGER
+	MAX-ACCESS  read-create
+	STATUS  	current
+	DESCRIPTION
+		"The Sync port."
+	::= { tribXcConnConfigEntry 2 }
+
+tribXcConnServiceType 	OBJECT-TYPE
+	SYNTAX      	XpdrServiceType
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"The service type of the service."
+	::= { tribXcConnConfigEntry 3 }
+
+tribXcConnMask1 	OBJECT-TYPE
+	SYNTAX      	TsMaskBits
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is a bit mask relevant only for 100G Muxponder entry. 
+		It contains a bit for each tributary slot allocated to the service port from Uplink 1.
+		To incluse a tributary slot the management should set the corresponding bit to 1.
+		To remove a tributary slot service the bit should be set to 0."
+	::= { tribXcConnConfigEntry 4 }
+
+tribXcConnMask2 	OBJECT-TYPE
+	SYNTAX      	TsMaskBits
+	MAX-ACCESS  	read-write
+	STATUS      	current
+	DESCRIPTION
+		"This object is a bit mask relevant only for 100G Muxponder entry. 
+		It contains a bit for each tributary slot allocated to the service port from Uplink 2.
+		To incluse a tributary slot the management should set the corresponding bit to 1.
+		To remove a tributary slot service the bit should be set to 0.
+		This entry is relevant only for protected services."
+	::= { tribXcConnConfigEntry 5 }
+
+tribXcConnConfigProtected 	OBJECT-TYPE
+	SYNTAX      	TruthValue
+	MAX-ACCESS  	read-create
+	STATUS      	current
+	DESCRIPTION
+		"Indication for entry with Protection Mates"
+	::= { tribXcConnConfigEntry 6 }
+
+tribXcConnConfigRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION "The Status of this connection entry."
+      ::= { tribXcConnConfigEntry 7 }
+
+smmOwnerMode OBJECT-TYPE
+	SYNTAX      	INTEGER {
+		gui(1),		-- (default)
+		ems(2)		-- 
+	}
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION "The owner of the SMM tables."
+	::= { slXpdrConn 4 }
+
+--
+-- The traps
+--
+
+xpdrConnConfigTableChange NOTIFICATION-TYPE
+	STATUS  current
+	DESCRIPTION
+		"A xpdrConnConfigTableChange trap is sent when the
+		content of the xpdrConnConfigTable is changed."
+	::= { slXpdrTraps 1 }
+
+xpdrConnConfigTableChange0 NOTIFICATION-TYPE
+	STATUS  current
+	DESCRIPTION
+		"A xpdrConnConfigTableChange trap is sent when the
+		content of the xpdrConnConfigTable is changed.
+		It is defined to support browsers that don't recognize RFC 2576."
+	::= { slXpdrTraps0 1 }
+
+END