Initial commitHEADmain

4 files changed, 891 insertions, 0 deletions

diff --git a/MIBS/ict/ICT-DIGITAL-SERIES-MIB b/MIBS/ict/ICT-DIGITAL-SERIES-MIB
new file mode 100644
index 0000000..efd6937
--- /dev/null
+++ b/MIBS/ict/ICT-DIGITAL-SERIES-MIB
@@ -0,0 +1,85 @@
+-- ICT MIB file for ICT Digital Series.
+--
+-- Date		Version
+-- =============================
+-- 10/4/12	v1.00
+--
+--  Renamed from ICT-MIB to ICT-DIGITAL-SERIES-MIB
+
+ICT-DIGITAL-SERIES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	enterprises, IpAddress	FROM RFC1155-SMI
+	DisplayString		FROM RFC1213-MIB
+	OBJECT-TYPE		FROM RFC-1212
+	TRAP-TYPE		FROM RFC-1215;
+
+ictPower			OBJECT IDENTIFIER ::= { enterprises 39145 }
+
+digitalSeries			OBJECT IDENTIFIER ::= { ictPower 11 }
+
+deviceModel			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Model Number"
+	::= { digitalSeries 1 }
+
+deviceName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Device Name"
+	::= { digitalSeries 2 }
+
+deviceHardware			OBJECT-TYPE
+	SYNTAX			INTEGER (0..127)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Hardware Version"
+	::= { digitalSeries 3 }
+
+deviceFirmware			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Firmware Version"
+	::= { digitalSeries 4 }
+
+deviceMacAddress		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"MAC Address"
+	::= { digitalSeries 5 }
+
+inputVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Input Voltage (VAC)"
+	::= { digitalSeries 6 }
+
+outputVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Voltage (VDC)"
+	::= { digitalSeries 7 }
+
+outputCurrent			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"System Current (Amps)"
+	::= { digitalSeries 8 }
+
+outputEnable			OBJECT-TYPE
+	SYNTAX			INTEGER { ENABLED(1), DISABLED(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Enable Status (a value of 1 indicates Output is Enabled, and a value of 2 indicates Output is Disabled)"
+	::= { digitalSeries 9 }
+
+
+END
diff --git a/MIBS/ict/ICT-DISTRIBUTION-PANEL-MIB b/MIBS/ict/ICT-DISTRIBUTION-PANEL-MIB
new file mode 100644
index 0000000..20bb6d4
--- /dev/null
+++ b/MIBS/ict/ICT-DISTRIBUTION-PANEL-MIB
@@ -0,0 +1,321 @@
+-- MIB file for ICT Distribution Panel Series
+--
+-- Date         Version
+-- =============================
+-- 9/5/13       1.01
+--
+-- Renamed from ICT-MIB to ICT-DISTRIBUTION-PANEL-MIB
+
+ICT-DISTRIBUTION-PANEL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	enterprises, IpAddress	FROM RFC1155-SMI
+	DisplayString		FROM RFC1213-MIB
+	OBJECT-TYPE		FROM RFC-1212
+	TRAP-TYPE		FROM RFC-1215;
+
+ictPower			OBJECT IDENTIFIER ::= { enterprises 39145 }
+
+distPanel			OBJECT IDENTIFIER ::= { ictPower 10 }
+
+deviceModel			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Model Number"
+	::= { distPanel 1 }
+
+deviceName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Site Name"
+	::= { distPanel 2 }
+
+deviceHardware			OBJECT-TYPE
+	SYNTAX			INTEGER (0..127)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Hardware Version"
+	::= { distPanel 3 }
+
+deviceFirmware			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Firmware Version"
+	::= { distPanel 4 }
+
+deviceMacAddress		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"MAC Address"
+	::= { distPanel 5 }
+
+systemVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"System Voltage (Volts)"
+	::= { distPanel 6 }
+
+systemCurrent			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"System Current (Amps)"
+	::= { distPanel 7 }
+
+outputTable			OBJECT-TYPE
+	SYNTAX SEQUENCE OF OutputEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION		"Output Table"
+	::= { distPanel 8 }
+
+outputEntry			OBJECT-TYPE
+	SYNTAX			OutputEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	INDEX { outputNumber }
+	::= { outputTable 1 }
+
+OutputEntry ::=
+	SEQUENCE {
+		outputNumber		INTEGER,
+		outputName		DisplayString,
+		outputCurrent		DisplayString,
+		outputFuseStatus	INTEGER,
+		outputEnable		INTEGER
+	}
+
+outputNumber			OBJECT-TYPE
+	SYNTAX			INTEGER (0..11)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Number"
+	::= { outputEntry 1 }
+
+outputName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Label"
+	::= { outputEntry 2 }
+
+outputCurrent			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Current (Amps)"
+	::= { outputEntry 3 }
+
+outputFuseStatus		OBJECT-TYPE
+	SYNTAX			INTEGER { OK(1), OPEN(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Fuse Status ('1' indicates Fuse is OK, and '2' indicates Fuse is OPEN)"
+	::= { outputEntry 4 }
+
+outputEnable			OBJECT-TYPE
+	SYNTAX			INTEGER { ENABLED(1), DISABLED(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Output Relay Enable ('1' indicates the Output is ENABLED, and '2' indicates the Output is DISABLED)"
+	::= { outputEntry 5 }
+
+alarmTable			OBJECT-TYPE
+	SYNTAX SEQUENCE OF AlarmEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Table"
+	::= { distPanel 9 }
+
+alarmEntry			OBJECT-TYPE
+	SYNTAX			AlarmEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	INDEX { alarmNumber }
+	::= { alarmTable 1 }
+
+AlarmEntry ::=
+	SEQUENCE {
+		alarmNumber		INTEGER,
+		alarmName		DisplayString,
+		alarmStatus		INTEGER
+	}
+
+alarmNumber			OBJECT-TYPE
+	SYNTAX			INTEGER (0..4)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Number"
+	::= { alarmEntry 1 }
+
+alarmName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Name"
+	::= { alarmEntry 2 }
+
+alarmStatus			OBJECT-TYPE
+	SYNTAX			INTEGER { INACTIVE(1), READY(2), ALARM(3) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Status ('1' indicates Alarm is INACTIVE,'2' indicates Alarm is READY, and '3' indicates Alarm is in an ALARM condition)"
+	::= { alarmEntry 3 }
+
+busTable			OBJECT-TYPE
+	SYNTAX SEQUENCE OF OutputEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION		"Output Table"
+	::= { distPanel 10 }
+
+busEntry			OBJECT-TYPE
+	SYNTAX			BusEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	INDEX { busNumber }
+	::= { busTable 1 }
+
+BusEntry ::=
+	SEQUENCE {
+		busNumber		INTEGER,
+		busName			DisplayString,
+		busVoltage		DisplayString,
+		busCurrent		DisplayString
+	}
+
+busNumber			OBJECT-TYPE
+	SYNTAX			INTEGER (0..1)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Bus Number"
+	::= { busEntry 1 }
+
+busName				OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Bus Name"
+	::= { busEntry 2 }
+
+busVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Bus Voltage (Volts)"
+	::= { busEntry 3 }
+
+busCurrent			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Total Bus Current (Amps)"
+	::= { busEntry 4 }
+
+
+--
+-- Trap definitions:
+--
+
+sysUndervoltageAlarmTrap	TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ busNumber }
+	DESCRIPTION		"Trap generated when a System/Bus Undervoltage Alarm is triggered"
+	::= 101
+
+sysOvervoltageAlarmTrap		TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ busNumber }
+	DESCRIPTION		"Trap generated when a System/Bus Overvoltage Alarm is triggered"
+	::= 102
+
+sysOvercurrentAlarmTrap		TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ busNumber }
+	DESCRIPTION		"Trap generated when a System/Bus Overcurrent Alarm is triggered"
+	::= 103
+
+fuseAlarmTrap			TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output Fuse Alarm is triggered"
+	::= 104
+
+undercurrentAlarmTrap		TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output Undercurrent Alarm is triggered"
+	::= 105
+
+overcurrentAlarmTrap		TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output Overcurrent Alarm is triggered"
+	::= 106
+
+loadshedTrap			TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when Load-Shedding is activated on an Output"
+	::= 107
+
+alarmInputTrap			TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ alarmNumber }
+	DESCRIPTION		"Trap generated when an Alarm Input is activated"
+	::= 108
+
+sysUndervoltageAlarmClear	TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ busNumber }
+	DESCRIPTION		"Trap generated when a System/Bus Undervoltage Alarm is cleared"
+	::= 111
+
+sysOvervoltageAlarmClear	TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ busNumber }
+	DESCRIPTION		"Trap generated when a System/Bus Overvoltage Alarm is cleared"
+	::= 112
+
+sysOvercurrentAlarmClear	TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ busNumber }
+	DESCRIPTION		"Trap generated when a System/Bus Overcurrent Alarm is cleared"
+	::= 113
+
+fuseAlarmClear			TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output Fuse Alarm is cleared"
+	::= 114
+
+undercurrentAlarmClear		TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output Undercurrent Alarm is cleared"
+	::= 115
+
+overcurrentAlarmClear		TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output Overcurrent Alarm is cleared"
+	::= 116
+
+loadshedClear			TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ outputNumber }
+	DESCRIPTION		"Trap generated when an Output has recovered from a Load-Shedding condition"
+	::= 117
+
+alarmInputClear			TRAP-TYPE
+	ENTERPRISE		distPanel
+	VARIABLES		{ alarmNumber }
+	DESCRIPTION		"Trap generated when an Alarm Input is cleared"
+	::= 118
+
+END
diff --git a/MIBS/ict/ICT-MODULAR-POWER-SYSTEM-MIB b/MIBS/ict/ICT-MODULAR-POWER-SYSTEM-MIB
new file mode 100644
index 0000000..42d343b
--- /dev/null
+++ b/MIBS/ict/ICT-MODULAR-POWER-SYSTEM-MIB
@@ -0,0 +1,313 @@
+-- ICT MIB file for ICT Modular Power System.
+--
+-- Date		Version
+-- =============================
+-- 1/5/18	v1.01
+--
+
+ICT-MODULAR-POWER-SYSTEM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	enterprises, IpAddress	FROM RFC1155-SMI
+	DisplayString		FROM RFC1213-MIB
+	OBJECT-TYPE		FROM RFC-1212
+	TRAP-TYPE		FROM RFC-1215;
+
+ictPower			OBJECT IDENTIFIER ::= { enterprises 39145 }
+
+powerSystem			OBJECT IDENTIFIER ::= { ictPower 13 }
+
+deviceModel			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Model Number"
+	::= { powerSystem 1 }
+
+deviceName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Device Name"
+	::= { powerSystem 2 }
+
+deviceHardware			OBJECT-TYPE
+	SYNTAX			INTEGER (0..127)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Hardware Version"
+	::= { powerSystem 3 }
+
+deviceFirmware			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Firmware Version"
+	::= { powerSystem 4 }
+
+deviceMacAddress		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"MAC Address"
+	::= { powerSystem 5 }
+
+inputVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Input Voltage (VAC)"
+	::= { powerSystem 6 }
+
+outputVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Output Voltage (VDC)"
+	::= { powerSystem 7 }
+
+outputCurrent			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Total System Current (Amps)"
+	::= { powerSystem 8 }
+
+outputEnable			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Output Enable Status (a value of '1' indicates Output is Enabled, and a value of '2' indicates Output is Disabled. Output cannot be disabled during an AC Failure)"
+	::= { powerSystem 9 }
+
+moduleTable			OBJECT-TYPE
+	SYNTAX SEQUENCE OF ModuleEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION		"Module Table"
+	::= { powerSystem 10 }
+
+moduleEntry			OBJECT-TYPE
+	SYNTAX			ModuleEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	INDEX { moduleNumber }
+	::= { moduleTable 1 }
+
+ModuleEntry ::=
+	SEQUENCE {
+		moduleNumber		INTEGER,
+		moduleStatus		INTEGER,
+		moduleType		INTEGER,
+		moduleVoltage		DisplayString,
+		moduleCurrentA		DisplayString,
+		moduleCurrentB		DisplayString,
+		moduleCurrentC		DisplayString,
+		moduleCurrentD		DisplayString,
+		moduleControlA		INTEGER,
+		moduleControlB		INTEGER,
+		moduleControlC		INTEGER,
+		moduleControlD		INTEGER
+	}
+
+moduleNumber			OBJECT-TYPE
+	SYNTAX			INTEGER (1..8)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Module Number"
+	::= { moduleEntry 1 }
+
+moduleStatus			OBJECT-TYPE
+	SYNTAX			INTEGER { notInstalled(1), ok(2), alarm(3) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Module Status"
+	::= { moduleEntry 2 }
+
+moduleType			OBJECT-TYPE
+	SYNTAX			INTEGER { notInstalled(1), power(2), battery(3), distribution(4) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Module Type ('1' indicates Module is NOT INSTALLED,'2' indicates POWER Module,'3' indicates BATTERY Module, and '4' indicates DISTRIBUTION Module)"
+	::= { moduleEntry 3 }
+
+moduleVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Module Voltage (VDC)"
+	::= { moduleEntry 4 }
+
+moduleCurrentA			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Channel 1 Current (Amps)"
+	::= { moduleEntry 5 }
+
+moduleCurrentB			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Channel 2 Current (Amps)"
+	::= { moduleEntry 6 }
+
+moduleCurrentC			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Channel 3 Current (Amps)"
+	::= { moduleEntry 7 }
+
+moduleCurrentD			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Channel 4 Current (Amps)"
+	::= { moduleEntry 8 }
+
+moduleControlA			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Channel 1 Control (a value of '1' indicates Channel is Enabled, and a value of '2' indicates Channel is Disabled)"
+	::= { moduleEntry 9 }
+
+moduleControlB			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Channel 2 Control (a value of '1' indicates Channel is Enabled, and a value of '2' indicates Channel is Disabled)"
+	::= { moduleEntry 10 }
+
+moduleControlC			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Channel 3 Control (a value of '1' indicates Channel is Enabled, and a value of '2' indicates Channel is Disabled)"
+	::= { moduleEntry 11 }
+
+moduleControlD			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Channel 4 Control (a value of '1' indicates Channel is Enabled, and a value of '2' indicates Channel is Disabled)"
+	::= { moduleEntry 12 }
+
+alarmTable			OBJECT-TYPE
+	SYNTAX SEQUENCE OF AlarmEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Table"
+	::= { powerSystem 11 }
+
+alarmEntry			OBJECT-TYPE
+	SYNTAX			AlarmEntry
+	ACCESS			not-accessible
+	STATUS			mandatory
+	INDEX { alarmNumber }
+	::= { alarmTable 1 }
+
+AlarmEntry ::=
+	SEQUENCE {
+		alarmNumber		INTEGER,
+		alarmName		DisplayString,
+		alarmStatus		INTEGER
+	}
+
+alarmNumber			OBJECT-TYPE
+	SYNTAX			INTEGER (1..4)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Number"
+	::= { alarmEntry 1 }
+
+alarmName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Name"
+	::= { alarmEntry 2 }
+
+alarmStatus			OBJECT-TYPE
+	SYNTAX			INTEGER { inactive(1), ready(2), alarm(3) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Alarm Input Status ('1' indicates Alarm is INACTIVE,'2' indicates Alarm is READY, and '3' indicates Alarm is in an ALARM condition)"
+	::= { alarmEntry 3 }
+
+
+--
+-- Trap definitions:
+--
+
+moduleAlarmTrap			TRAP-TYPE
+	ENTERPRISE		powerSystem
+	VARIABLES		{ moduleNumber }
+	DESCRIPTION		"Trap generated when a Module Alarm is triggered"
+	::= 101
+
+alarmInputTrap			TRAP-TYPE
+	ENTERPRISE		powerSystem
+	VARIABLES		{ alarmNumber }
+	DESCRIPTION		"Trap generated when an Alarm Input is activated"
+	::= 102
+
+acFailAlarmTrap			TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when the AC Failure Alarm is triggered"
+	::= 103
+
+sysCurrentLimitTrap		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when the System Current Limit Alarm is triggered"
+	::= 104
+
+moduleAlarmClear		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	VARIABLES		{ moduleNumber }
+	DESCRIPTION		"Trap generated when a Module Alarm is cleared"
+	::= 111
+
+alarmInputClear			TRAP-TYPE
+	ENTERPRISE		powerSystem
+	VARIABLES		{ alarmNumber }
+	DESCRIPTION		"Trap generated when an Alarm Input is cleared"
+	::= 112
+
+acFailAlarmClear		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when the AC Failure Alarm is cleared"
+	::= 113
+
+sysCurrentLimitClear		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when the System Current Limit Alarm is cleared"
+	::= 114
+
+batteryTestStart		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when a Battery Discharge Test is started"
+	::= 121
+
+batteryTestComplete		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when a Battery Discharge Test completes successfully"
+	::= 122
+
+batteryTestFail			TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when a Battery Discharge Test fails"
+	::= 123
+
+batteryEqualiseStart		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when a Battery Equalise Charge is started"
+	::= 124
+
+batteryEqualiseComplete		TRAP-TYPE
+	ENTERPRISE		powerSystem
+	DESCRIPTION		"Trap generated when a Battery Equalise Charge completes"
+	::= 125
+
+END
diff --git a/MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB b/MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB
new file mode 100644
index 0000000..566578a
--- /dev/null
+++ b/MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB
@@ -0,0 +1,172 @@
+-- MIB file for ICT Sine Wave Inverter.
+--
+-- Date		Version
+-- =============================
+-- 3/7/18	1.01
+--
+
+ICT-SINE-WAVE-INVERTER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	enterprises, IpAddress	FROM RFC1155-SMI
+	DisplayString		FROM RFC1213-MIB
+	OBJECT-TYPE		FROM RFC-1212
+	TRAP-TYPE		FROM RFC-1215;
+
+ictPower			OBJECT IDENTIFIER ::= { enterprises 39145 }
+
+inverter			OBJECT IDENTIFIER ::= { ictPower 12 }
+
+deviceModel			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Model Number"
+	::= { inverter 1 }
+
+deviceName			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Site Name"
+	::= { inverter 2 }
+
+deviceHardware			OBJECT-TYPE
+	SYNTAX			INTEGER (0..127)
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Hardware Version"
+	::= { inverter 3 }
+
+deviceFirmware			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Firmware Version"
+	::= { inverter 4 }
+
+deviceMacAddress		OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"MAC Address"
+	::= { inverter 5 }
+
+batteryVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Battery Voltage (VDC)"
+	::= { inverter 6 }
+
+inverterVoltage			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Inverter Output Voltage (VAC)"
+	::= { inverter 7 }
+
+inverterPower			OBJECT-TYPE
+	SYNTAX			DisplayString
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Inverter Output Power (%)"
+	::= { inverter 8 }
+
+inverterStatus			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Inverter Output Status ('1' indicates the Inverter Output is ENABLED, and '2' indicates the Inverter Output is DISABLED)"
+	::= { inverter 9 }
+
+inverterControl			OBJECT-TYPE
+	SYNTAX			INTEGER { enabled(1), disabled(2) }
+	ACCESS			read-write
+	STATUS			mandatory
+	DESCRIPTION		"Inverter Output Control (set to '1' to ENABLE the Inverter Output if no alarms are active, set to '2' to DISABLE the Inverter Output)"
+	::= { inverter 10 }
+
+transferRelayStatus		OBJECT-TYPE
+	SYNTAX			INTEGER { inverter(1), grid(2) }
+	ACCESS			read-only
+	STATUS			mandatory
+	DESCRIPTION		"Transfer Relay Status ('1' indicates the Output is connected to the INVERTER, and '2' indicates the Output is connected to the GRID)"
+	::= { inverter 11 }
+
+
+--
+-- Trap definitions:
+--
+
+undervoltageAlarmTrap		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Battery Input Undervoltage Alarm is triggered"
+	::= 101
+
+overvoltageAlarmTrap		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Battery Input Overvoltage Alarm is triggered"
+	::= 102
+
+overtemperatureAlarmTrap	TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Overtemperature Alarm is triggered"
+	::= 103
+
+outputFaultAlarmTrap		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Inverter Output Fault Alarm is triggered"
+	::= 104
+
+systemFaultAlarmTrap		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the System Fault Alarm is triggered"
+	::= 105
+
+remoteSwitchAlarmTrap		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Remote Switch accessory is activated"
+	::= 106
+
+undervoltageAlarmClear		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Battery Input Undervoltage Alarm is cleared"
+	::= 111
+
+overvoltageAlarmClear		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Battery Input Overvoltage Alarm is cleared"
+	::= 112
+
+overtemperatureAlarmClear	TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Overtemperature Alarm is cleared"
+	::= 113
+
+outputFaultAlarmClear		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Inverter Output Fault Alarm is cleared"
+	::= 114
+
+systemFaultAlarmClear		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the System Fault Alarm is cleared"
+	::= 115
+
+remoteSwitchAlarmClear		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Remote Switch accessory is deactivated"
+	::= 116
+
+inverterPowerTrap		TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Output switches to Inverter (Battery) Power"
+	::= 121
+
+gridPowerTrap			TRAP-TYPE
+	ENTERPRISE		inverter
+	DESCRIPTION		"Trap generated when the Output switches to Grid Power"
+	::= 122
+
+END