diff options
Diffstat (limited to 'MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB')
| -rw-r--r-- | MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB b/MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB new file mode 100644 index 0000000..566578a --- /dev/null +++ b/MIBS/ict/ICT-SINE-WAVE-INVERTER-MIB @@ -0,0 +1,172 @@ +-- MIB file for ICT Sine Wave Inverter. +-- +-- Date Version +-- ============================= +-- 3/7/18 1.01 +-- + +ICT-SINE-WAVE-INVERTER-MIB DEFINITIONS ::= BEGIN + +IMPORTS + enterprises, IpAddress FROM RFC1155-SMI + DisplayString FROM RFC1213-MIB + OBJECT-TYPE FROM RFC-1212 + TRAP-TYPE FROM RFC-1215; + +ictPower OBJECT IDENTIFIER ::= { enterprises 39145 } + +inverter OBJECT IDENTIFIER ::= { ictPower 12 } + +deviceModel OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "Model Number" + ::= { inverter 1 } + +deviceName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "Site Name" + ::= { inverter 2 } + +deviceHardware OBJECT-TYPE + SYNTAX INTEGER (0..127) + ACCESS read-only + STATUS mandatory + DESCRIPTION "Hardware Version" + ::= { inverter 3 } + +deviceFirmware OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "Firmware Version" + ::= { inverter 4 } + +deviceMacAddress OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "MAC Address" + ::= { inverter 5 } + +batteryVoltage OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "Battery Voltage (VDC)" + ::= { inverter 6 } + +inverterVoltage OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "Inverter Output Voltage (VAC)" + ::= { inverter 7 } + +inverterPower OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION "Inverter Output Power (%)" + ::= { inverter 8 } + +inverterStatus OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION "Inverter Output Status ('1' indicates the Inverter Output is ENABLED, and '2' indicates the Inverter Output is DISABLED)" + ::= { inverter 9 } + +inverterControl OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION "Inverter Output Control (set to '1' to ENABLE the Inverter Output if no alarms are active, set to '2' to DISABLE the Inverter Output)" + ::= { inverter 10 } + +transferRelayStatus OBJECT-TYPE + SYNTAX INTEGER { inverter(1), grid(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION "Transfer Relay Status ('1' indicates the Output is connected to the INVERTER, and '2' indicates the Output is connected to the GRID)" + ::= { inverter 11 } + + +-- +-- Trap definitions: +-- + +undervoltageAlarmTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Battery Input Undervoltage Alarm is triggered" + ::= 101 + +overvoltageAlarmTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Battery Input Overvoltage Alarm is triggered" + ::= 102 + +overtemperatureAlarmTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Overtemperature Alarm is triggered" + ::= 103 + +outputFaultAlarmTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Inverter Output Fault Alarm is triggered" + ::= 104 + +systemFaultAlarmTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the System Fault Alarm is triggered" + ::= 105 + +remoteSwitchAlarmTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Remote Switch accessory is activated" + ::= 106 + +undervoltageAlarmClear TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Battery Input Undervoltage Alarm is cleared" + ::= 111 + +overvoltageAlarmClear TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Battery Input Overvoltage Alarm is cleared" + ::= 112 + +overtemperatureAlarmClear TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Overtemperature Alarm is cleared" + ::= 113 + +outputFaultAlarmClear TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Inverter Output Fault Alarm is cleared" + ::= 114 + +systemFaultAlarmClear TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the System Fault Alarm is cleared" + ::= 115 + +remoteSwitchAlarmClear TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Remote Switch accessory is deactivated" + ::= 116 + +inverterPowerTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Output switches to Inverter (Battery) Power" + ::= 121 + +gridPowerTrap TRAP-TYPE + ENTERPRISE inverter + DESCRIPTION "Trap generated when the Output switches to Grid Power" + ::= 122 + +END |