diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/fs/ERRP-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/fs/ERRP-MIB')
| -rw-r--r-- | MIBS/fs/ERRP-MIB | 506 |
1 files changed, 506 insertions, 0 deletions
diff --git a/MIBS/fs/ERRP-MIB b/MIBS/fs/ERRP-MIB new file mode 100644 index 0000000..8cbc169 --- /dev/null +++ b/MIBS/fs/ERRP-MIB @@ -0,0 +1,506 @@ +ERRP-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ Counter32, Unsigned32, TimeTicks
+ FROM SNMPv2-SMI
+ RowStatus, TruthValue, DisplayString,
+ TEXTUAL-CONVENTION, MacAddress
+ FROM SNMPv2-TC
+ gbnL2
+ FROM ADMIN-MASTER-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+ errpMib MODULE-IDENTITY
+ LAST-UPDATED "201012140000Z"
+ ORGANIZATION "NEW ADMIN MIB Working Group"
+ CONTACT-INFO
+ "Email: support@admin.com"
+ DESCRIPTION
+ " The errp MIB is targeted at easing errp configuration via snmp tools."
+ REVISION "1012140000Z"
+ DESCRIPTION
+ "Draft 1"
+ ::= {gbnL2 7 }
+
+ errpMIBObjects OBJECT IDENTIFIER ::= { errpMib 1 }
+ errp OBJECT IDENTIFIER ::= { errpMIBObjects 1 }
+
+ errpOnoff OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable errp function for this bridge."
+ --errp使能开关
+ ::= { errp 1 }
+
+ errpHealthTime OBJECT-TYPE
+ SYNTAX Integer32(1..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hello timer is used by master or edge node for ring health detection.
+ The correct operational formula: FailedTimer >= 3 * HelloTimer "
+ --主节点和边界节点使用此定时器对环路的完整性进行周期性检测
+ ::= { errp 2 }
+
+ errpHealthTimeout OBJECT-TYPE
+ SYNTAX Integer32(3..30)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The timeout value used by master during ring health detection.
+ The correct operational formula: FailedTimer >= 3 * HelloTimer"
+ --主节点检测环路完整性使用的超时定时器值，该值必须大于等于HelloTimer的3倍。
+ ::= { errp 3 }
+
+ errpMajorFaultTime OBJECT-TYPE
+ SYNTAX Integer32(2..29)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The timeout value used by assitant edge during ring health detection."
+ --辅助边缘节点检测环路完整性使用的超时定时器值
+ ::= { errp 4 }
+
+ errpPrefwdTimeout OBJECT-TYPE
+ SYNTAX Integer32(3..30)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The block timeout value used by node when portup event occurs."
+ --端口UP时节点使用的端口阻塞超时定时器
+ ::= { errp 5 }
+
+ errpDomainTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ErrpDomainEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains domain-specific information."
+ --由errp域表项构成的表
+ ::= { errp 6 }
+
+ errpDomainEntry OBJECT-TYPE
+ SYNTAX ErrpDomainEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every domain."
+ --基于每个域的表项
+ INDEX { errpDomainId }
+ ::= { errpDomainTable 1 }
+
+ ErrpDomainEntry ::=
+ SEQUENCE {
+ errpDomainId Integer32,
+ errpMVlanId Integer32,
+ errpWorkMode INTEGER,
+ errpDomainRowStatus RowStatus
+ }
+
+ errpDomainId OBJECT-TYPE
+ SYNTAX Integer32(0..15)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The domain ID is used when network is managed in unit of domain, one
+ domain should be a set of contiguous bridges."
+ --域ID在网络分域管理时使用，一个域就是一个毗邻的网桥集合
+ ::= { errpDomainEntry 1 }
+
+ errpMVlanId OBJECT-TYPE
+ SYNTAX Integer32 (1..4093)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The manage VLAN ID of the domain, can not be an existing vlan."
+ --域的管理VLAN ID, 每个域具有两个控制VLAN，分别叫做主控制VLAN和子控制VLAN。
+ --主环的协议报文在主控制VLAN中传播，子环的协议报文在子控制VLAN中传播。
+ --配置时只需要指定主控制VLAN，而把比主控制VLAN ID值大1的VLAN作为子控制VLAN。
+ --主控制VLAN和子控制VLAN都不能指定为已经存在的VLAN，MAC地址学习模式必须配置为IVL。
+ ::= { errpDomainEntry 2 }
+
+ errpWorkMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ standard(1),
+ huaWei(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The work mode of the domain. If standard(1) is set, then the domain works on RFC3619
+ standard. If huaWei(2) is set, then the domain works on RRPP standard, and is able
+ to work together with the Huawei equipment."
+ --域的工作模式
+ ::= { errpDomainEntry 3 }
+
+ errpDomainRowStatus OBJECT-TYPE
+ SYNTAX RowStatus {
+ active(1),
+ createAndGo(4),
+ destroy(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to create or delete a domain."
+ ::= { errpDomainEntry 4 }
+
+ errpRingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ErrpRingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains domain-and-ring-specific information."
+ --由errp环表项构成的表
+ ::= { errp 7 }
+
+ errpRingEntry OBJECT-TYPE
+ SYNTAX ErrpRingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every ring."
+ --基于每个环的表项
+ INDEX { errpDomainId, errpRingId }
+ ::= { errpRingTable 1 }
+
+ ErrpRingEntry ::=
+ SEQUENCE {
+ errpRingId Integer32,
+ errpRingLevel Integer32,
+ errpBrdgRole INTEGER,
+ errpPriComPortId Integer32,
+ errpSecEdgePortId Integer32,
+ errpRingRowStatus RowStatus,
+ errpNodeState INTEGER,
+ errpPriComPortState INTEGER,
+ errpSecEdgePortState INTEGER,
+ errpQuerySolicit INTEGER
+ }
+
+ errpRingId OBJECT-TYPE
+ SYNTAX Integer32 (0..15)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The identifier of ethernet ring which reside in a domain."
+ --域内以太环的ID
+ ::= { errpRingEntry 1 }
+
+ errpRingLevel OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The ring level,0 means master ring, while 1 means sub ring."
+ --环的级别,0为主环,1为子环
+ ::= { errpRingEntry 2 }
+
+ errpBrdgRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(1),
+ trans(2),
+ edge(3),
+ assEdge(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The bridge role in ethernet ring."
+ --网桥在环中的角色
+ ::= { errpRingEntry 3 }
+
+ errpPriComPortId OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The primary port id when bridge is master or transmit,the common port id otherwise."
+ --网桥为主节点或者传输节点时此值代表主端口,否则代表公共端口
+ ::= { errpRingEntry 4 }
+
+ errpSecEdgePortId OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The secondary port id when bridge is master or transmit,the edge port id otherwise."
+ --网桥为主节点或者传输节点时此值代表副端口,否则代表边界端口
+ ::= { errpRingEntry 5 }
+
+ errpRingRowStatus OBJECT-TYPE
+ SYNTAX RowStatus {
+ active(1),
+ notInService(2),
+ notReady(3),
+ createAndGo(4),
+ createAndWait(5),
+ destroy(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this ring."
+ --指示当前环的活动状态
+ ::= { errpRingEntry 6 }
+
+ errpNodeState OBJECT-TYPE
+ SYNTAX INTEGER {
+ begin(0),
+ health(1),
+ fault(2),
+ linkUp(3),
+ linkDown(4),
+ preforwarding(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The node state in the ring. begin(0) means node is inactive or inital state.
+ health(1) means master node detects the ring in a health state.
+ fault(2) means master node detects the ring in a fault state.
+ linkUp(3) means both ring ports of the transmit node are link up and in the forwarding state.
+ linkDown(4) means at least one ring port of the transmit node is link down.
+ preforwarding(5) means at least one ring port of the transmit node is just link up and in the blocking state.
+ Edge node and assistant edge node are same as transmit node, but only concern about the edge port state."
+ ::= { errpRingEntry 7 }
+
+ errpPriComPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ forwarding(1),
+ blocking(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary port or common port state in the ring. disabled(0) means port is link down.
+ forwarding(1) means port is in the forwarding state.
+ blocking(2) means port is in the blocking or discarding state."
+ ::= { errpRingEntry 8 }
+
+ errpSecEdgePortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ forwarding(1),
+ blocking(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The secondary port or edge port state in the ring. disabled(0) means port is link down.
+ forwarding(1) means port is in the forwarding state.
+ blocking(2) means port is in the blocking or discarding state."
+ ::= { errpRingEntry 9 }
+
+ errpQuerySolicit OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable Query Solicit function of the ring."
+ ::= { errpRingEntry 10 }
+
+ errpRingStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ErrpRingStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains statistics for the ERRP ring ports."
+ ::= { errp 8 }
+
+ errpRingStatsEntry OBJECT-TYPE
+ SYNTAX ErrpRingStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of statistics maintained by every ring port. The sequence is:
+ (domain,ring,priComPort),(domain,ring,secEdgePort),
+ (domain,next ring,priComPort),(domain,next ring,secEdgePort),...,
+ (next domain,ring,priComPort),(next domain,ring,secEdgePort),
+ (next domain,next ring,priComPort),......"
+ INDEX { errpDomainId, errpRingId, errpRingPortId }
+ ::= { errpRingStatsTable 1 }
+
+ ErrpRingStatsEntry ::=
+ SEQUENCE {
+ errpRingPortId Integer32,
+ errpHealthTx Counter32,
+ errpHealthRx Counter32,
+ errpCommonFlushTx Counter32,
+ errpCommonFlushRx Counter32,
+ errpCompleteFlushTx Counter32,
+ errpCompleteFlushRx Counter32,
+ errpLinkDownTx Counter32,
+ errpLinkDownRx Counter32,
+ errpLinkUpTx Counter32,
+ errpLinkUpRx Counter32,
+ errpEdgeHelloTx Counter32,
+ errpEdgeHelloRx Counter32,
+ errpMajorFaultTx Counter32,
+ errpMajorFaultRx Counter32
+ }
+
+ errpRingPortId OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port equals to errpPriComPortId or errpSecEdgePortId of the ring within errpRingTable."
+ ::= { errpRingStatsEntry 1 }
+
+ errpHealthTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Health(or Hello) packets transmitted on this port."
+ ::= { errpRingStatsEntry 2 }
+
+ errpHealthRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Health(or Hello) packets received on this port."
+ ::= { errpRingStatsEntry 3 }
+
+ errpCommonFlushTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Common Flush packets transmitted on this port."
+ ::= { errpRingStatsEntry 4 }
+
+ errpCommonFlushRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Common Flush packets received on this port."
+ ::= { errpRingStatsEntry 5 }
+
+ errpCompleteFlushTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Complete Flush packets transmitted on this port."
+ ::= { errpRingStatsEntry 6 }
+
+ errpCompleteFlushRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Complete Flush packets received on this port."
+ ::= { errpRingStatsEntry 7 }
+
+ errpLinkDownTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Link Down packets transmitted on this port."
+ ::= { errpRingStatsEntry 8 }
+
+ errpLinkDownRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Link Down packets received on this port."
+ ::= { errpRingStatsEntry 9 }
+
+ errpLinkUpTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Link Up packets transmitted on this port."
+ ::= { errpRingStatsEntry 10 }
+
+ errpLinkUpRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Link Up packets received on this port."
+ ::= { errpRingStatsEntry 11 }
+
+ errpEdgeHelloTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Edge Hello packets transmitted on this port."
+ ::= { errpRingStatsEntry 12 }
+
+ errpEdgeHelloRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Edge Hello packets received on this port."
+ ::= { errpRingStatsEntry 13 }
+
+ errpMajorFaultTx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Major Fault packets transmitted on this port."
+ ::= { errpRingStatsEntry 14 }
+
+ errpMajorFaultRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A count of the number of Major Fault packets received on this port."
+ ::= { errpRingStatsEntry 15 }
+
+ errpTrap OBJECT IDENTIFIER ::= { errp 9 }
+ ----------------------------------------------------------------------------------
+ --ERRP TRAP MIB--
+ ----------------------------------------------------------------------------------
+
+ errpRingNodeStateChange NOTIFICATION-TYPE
+ OBJECTS { errpNodeState }
+ STATUS current
+ DESCRIPTION
+ "The node state in the ring turns to health or fault.
+ health(1) means master node detects the ring in a health state.
+ fault(2) means master node detects the ring in a fault state."
+ ::= { errpTrap 1 }
+
+ errpPriComPortStateChange NOTIFICATION-TYPE
+ OBJECTS { errpPriComPortState }
+ STATUS current
+ DESCRIPTION
+ "The primary port or common port state in the ring turns to disabled, forwarding, or blocking.
+ disabled(0) means port is link down.
+ forwarding(1) means port is in the forwarding state.
+ blocking(2) means port is in the blocking or discarding state."
+ ::= { errpTrap 2 }
+
+ errpSecEdgePortStateChange NOTIFICATION-TYPE
+ OBJECTS { errpSecEdgePortState }
+ STATUS current
+ DESCRIPTION
+ "The secondary port or edge port state in the ring turns to disabled, forwarding, or blocking.
+ disabled(0) means port is link down.
+ forwarding(1) means port is in the forwarding state.
+ blocking(2) means port is in the blocking or discarding state."
+ ::= { errpTrap 3 }
+ END
|