diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/cambium/WHISP-BOX-MIBV2-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/cambium/WHISP-BOX-MIBV2-MIB')
| -rw-r--r-- | MIBS/cambium/WHISP-BOX-MIBV2-MIB | 7815 |
1 files changed, 7815 insertions, 0 deletions
diff --git a/MIBS/cambium/WHISP-BOX-MIBV2-MIB b/MIBS/cambium/WHISP-BOX-MIBV2-MIB new file mode 100644 index 0000000..bb86164 --- /dev/null +++ b/MIBS/cambium/WHISP-BOX-MIBV2-MIB @@ -0,0 +1,7815 @@ +
+--
+-- whisp-box-mib.mib
+-- GENERATED FROM ui_db.xml
+--
+-- ****************************************************************************************************
+-- Copyright 2005 - 2015 (c), Cambium Networks
+-- Cambium Networks Confidential Proprietary
+-- ****************************************************************************************************
+--
+-- Canopy Box Level(AP,SM and Backhaul) MIB definitions.
+--
+-- ***************************************************************************************************
+
+WHISP-BOX-MIBV2-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, Unsigned32
+ FROM SNMPv2-SMI
+ DisplayString, MacAddress
+ FROM SNMPv2-TC
+ OBJECT-GROUP
+ FROM SNMPv2-CONF
+ WhispLUID, WhispMACAddress, EventString
+ FROM WHISP-TCV2-MIB
+ whispModules, whispBox
+ FROM WHISP-GLOBAL-REG-MIB
+ ;
+
+whispBoxLevelMibModule MODULE-IDENTITY
+ LAST-UPDATED "200304150000Z"
+ ORGANIZATION "Cambium Networks"
+ CONTACT-INFO
+ "Cambium Networks Support
+ email: support@cambiumnetworks.com"
+ DESCRIPTION
+ "This module contains generic Box-Level MIB definitions for Canopy Radios."
+ ::= {whispModules 8}
+
+-- -------------------------------------------------------------------------
+-- Top Level Registrations
+
+whispBoxStatus OBJECT IDENTIFIER ::= {whispBox 1}
+whispBoxConfig OBJECT IDENTIFIER ::= {whispBox 2}
+whispBoxControls OBJECT IDENTIFIER ::= {whispBox 3}
+whispBoxEventLog OBJECT IDENTIFIER ::= {whispBox 5}
+whispBoxConf OBJECT IDENTIFIER ::= {whispBox 6}
+whispBoxGroups OBJECT IDENTIFIER ::= {whispBoxConf 1}
+whispBoxBridgeVar OBJECT IDENTIFIER ::= {whispBox 7}
+whispBoxCPVar OBJECT IDENTIFIER ::= {whispBox 9}
+whispBoxEvent OBJECT IDENTIFIER ::= {whispBox 12}
+whispBoxDHCPClientEvent OBJECT IDENTIFIER ::= {whispBoxEvent 1}
+whispBoxPoEEvent OBJECT IDENTIFIER ::= {whispBoxEvent 2}
+whispBoxRadioAlarmEvent OBJECT IDENTIFIER ::= {whispBoxEvent 3}
+whispBoxDNS OBJECT IDENTIFIER ::= {whispBox 13}
+whispBoxSNMPv3 OBJECT IDENTIFIER ::= {whispBox 14}
+whispBoxLink OBJECT IDENTIFIER ::= {whispBox 18}
+whispBoxLinkTestConfig OBJECT IDENTIFIER ::= {whispBoxLink 1}
+whispBoxLinkTestResult OBJECT IDENTIFIER ::= {whispBoxLink 2}
+whispBoxLinkTestMVCResult OBJECT IDENTIFIER ::= {whispBoxLink 5}
+whispUserAuthSecurity OBJECT IDENTIFIER ::= {whispBox 19}
+whispBoxRFPhysical OBJECT IDENTIFIER ::= {whispBox 15}
+whispBoxRFConfig OBJECT IDENTIFIER ::= {whispBox 16}
+
+-- -------------------------------------------------------------------------
+
+
+-- Canopy radio status page
+
+ whispBoxSoftwareVer OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Version of software. Should be noted in the event customer has
+ technical difficulties and need to contact technical support."
+ ::={whispBoxStatus 1}
+
+ whispBoxFPGAVer OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Version of FPGA."
+ ::={whispBoxStatus 2}
+
+ whispBoxEsn OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Electronic serial number(MAC address) assigned to Radio."
+ ::={whispBoxStatus 3}
+
+ whispBoxBoot OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Software boot version."
+ ::={whispBoxStatus 4}
+
+ boxTemperature OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Radio temperature."
+ ::={whispBoxStatus 5}
+
+ boxDeviceType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the device."
+ ::={whispBoxStatus 6}
+
+ boxDeviceTypeID OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device type ID."
+ ::={whispBoxStatus 7}
+
+ boxEncryption OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device encryption type. Note: Returns DES also when encryption is set to None on AP."
+ ::={whispBoxStatus 8}
+
+ etherLinkStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet link status."
+ ::={whispBoxStatus 9}
+
+ boxFrequency OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frequency band of the device."
+ ::={whispBoxStatus 10}
+
+ platformVer OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hardware platform version. For internal use."
+ ::={whispBoxStatus 11}
+
+ platformType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage,
+ Advantage, Russian, Russian - Advantage."
+ ::={whispBoxStatus 12}
+
+ dhcpLanIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LAN interface IP obtained through DHCP."
+ ::={whispBoxStatus 13}
+
+ dhcpLanSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LAN interface Subnet Mask obtained through DHCP."
+ ::={whispBoxStatus 14}
+
+ dhcpLanGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LAN interface Gateway obtained through DHCP."
+ ::={whispBoxStatus 15}
+
+ dhcpRfPublicIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Public interface IP obtained through DHCP."
+ ::={whispBoxStatus 16}
+
+ dhcpRfPublicSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Public interface Subnet Mask obtained through DHCP."
+ ::={whispBoxStatus 17}
+
+ dhcpRfPublicGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Public interface Gateway obtained through DHCP."
+ ::={whispBoxStatus 18}
+
+ lanDhcpStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display LAN interface current DHPC status."
+ ::={whispBoxStatus 19}
+
+ rfPublicDhcpStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display RF Public interface current DHPC status."
+ ::={whispBoxStatus 20}
+
+ inSyncCount OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Counter for number of In Synchronization."
+ ::={whispBoxStatus 21}
+
+ outSyncCount OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Counter for number of Out of Synchronization."
+ ::={whispBoxStatus 22}
+
+ pllOutLockCount OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Counter for number of PLL out of Lock."
+ ::={whispBoxStatus 23}
+
+ txCalFailure OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Counter for number of TX Calibration failure."
+ ::={whispBoxStatus 24}
+
+ swVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Software version information."
+ ::={whispBoxStatus 25}
+
+ pldVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PLD version information."
+ ::={whispBoxStatus 26}
+
+ platformInfo OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Platform information."
+ ::={whispBoxStatus 27}
+
+ antPolarization OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Antenna polarization for FSK radios."
+ ::={whispBoxStatus 28}
+
+ packetOverloadCounter OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total packet overload count."
+ ::={whispBoxStatus 29}
+
+ whispBoxP11Personality OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Board Personality Configuration"
+ ::={whispBoxStatus 30}
+
+ whispBoxP11FPGAType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "FPGA Type"
+ ::={whispBoxStatus 31}
+
+ whispBoxP11BstrapFPGAVer OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "P11 Bootstrap FPGA Version."
+ ::={whispBoxStatus 32}
+
+ numDFSDetections OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of DFS Detections since last boot."
+ ::={whispBoxStatus 33}
+
+ rxOverrunPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Counter for number of received overrun packets error."
+ ::={whispBoxStatus 34}
+
+ boxTemperatureC OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Radio temperature in Celsius."
+ ::={whispBoxStatus 35}
+
+ boxTemperatureF OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Radio temperature in Fahrenheit."
+ ::={whispBoxStatus 36}
+
+ bridgeCbFecStatbin OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats bin"
+ ::={whispBoxStatus 37}
+
+ bridgeCbFecStatbout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats bout"
+ ::={whispBoxStatus 38}
+
+ bridgeCbFecStatbtoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats btoss"
+ ::={whispBoxStatus 39}
+
+ bridgeCbFecStatbtosscap OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats btosscap"
+ ::={whispBoxStatus 40}
+
+ bridgeCbFecStatuin OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats uin"
+ ::={whispBoxStatus 41}
+
+ bridgeCbFecStatuout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats uout"
+ ::={whispBoxStatus 42}
+
+ bridgeCbFecStatutoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats utoss"
+ ::={whispBoxStatus 43}
+
+ bridgeCbFecStatutosscap OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats utosscap"
+ ::={whispBoxStatus 44}
+
+ bridgeCbRFStatbin OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats bin"
+ ::={whispBoxStatus 45}
+
+ bridgeCbRFStatbout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats bout"
+ ::={whispBoxStatus 46}
+
+ bridgeCbRFStatbtoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats btoss"
+ ::={whispBoxStatus 47}
+
+ bridgeCbRFStatbtosscap OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats btosscap"
+ ::={whispBoxStatus 48}
+
+ bridgeCbRFStatuin OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats uin"
+ ::={whispBoxStatus 49}
+
+ bridgeCbRFStatuout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats uout"
+ ::={whispBoxStatus 50}
+
+ bridgeCbRFStatutoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats utoss"
+ ::={whispBoxStatus 51}
+
+ bridgeCbRFStatutosscap OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats utosscap"
+ ::={whispBoxStatus 52}
+
+ bridgeCbErrStatNI1QSend OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Error Stats ErrNI1QSend"
+ ::={whispBoxStatus 53}
+
+ bridgeCbErrStatNI2QSend OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Error Stats ErrNI2QSend"
+ ::={whispBoxStatus 54}
+
+ bridgeCbErrStatBridgeFull OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Error Stats BridgeFull"
+ ::={whispBoxStatus 55}
+
+ bridgeCbErrStatSendMsg OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Error Stats SendMsg"
+ ::={whispBoxStatus 56}
+
+ bridgeCbErrStatAPFecQSend OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Error Stats APFecQSend"
+ ::={whispBoxStatus 57}
+
+ bridgeCbErrStatApRfQSend OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Error Stats ApRfQSend"
+ ::={whispBoxStatus 58}
+
+ rfStatXmtUDataCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Transmit Unicast Data Count"
+ ::={whispBoxStatus 59}
+
+ rfStatXmtBDataCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Transmit Broadcast Data Count"
+ ::={whispBoxStatus 60}
+
+ rfStatRcvUDataCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Receive Unicast Data Count"
+ ::={whispBoxStatus 61}
+
+ rfStatRcvBDataCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Receive Broadcast Data Count"
+ ::={whispBoxStatus 62}
+
+ rfStatXmtCntlCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Transmit Control Count"
+ ::={whispBoxStatus 63}
+
+ rfStatRcvCntlCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Receive Control Count"
+ ::={whispBoxStatus 64}
+
+ rfStatInSyncCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats In Sync Count"
+ ::={whispBoxStatus 65}
+
+ rfStatOutSyncCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Out Sync Count"
+ ::={whispBoxStatus 66}
+
+ rfStatOverrunCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Overrun Count"
+ ::={whispBoxStatus 67}
+
+ rfStatUnderrunCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Underrun Count"
+ ::={whispBoxStatus 68}
+
+ rfStatRcvCorruptDataCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Receive Corrupt Data Count"
+ ::={whispBoxStatus 69}
+
+ rfStatBadBcastCtlCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Bad Broadcast Control Count"
+ ::={whispBoxStatus 70}
+
+ rfStatPLLOutOfLockCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats PLL Out of Lock Count"
+ ::={whispBoxStatus 71}
+
+ rfStatBeaconVerMismatchCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Beacon version Mismatch Count"
+ ::={whispBoxStatus 72}
+
+ rfStatBadFreqBcnRcvCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Wrong Frequency Beacon Received Count"
+ ::={whispBoxStatus 73}
+
+ rfStatnonLiteBcnRcvCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Non Lite Beacon Received Count"
+ ::={whispBoxStatus 74}
+
+ rfStatUnsupFeatBcnRcvCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Unsupported Feature Beacon Received Count"
+ ::={whispBoxStatus 75}
+
+ rfStatUnkwnFeatBcnRcvCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Unknown Feature Beacon Received Count"
+ ::={whispBoxStatus 76}
+
+ rfStatTxCalFailCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats TX Calibration Failures Count"
+ ::={whispBoxStatus 77}
+
+ rfStatBadInSyncIDRcv OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Bad In Sync ID Received Count"
+ ::={whispBoxStatus 78}
+
+ rfStatTempOutOfRange OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Temperature Out of Range Count"
+ ::={whispBoxStatus 79}
+
+ rfStatRSSIOutOfRange OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats RSSI Out of Range Count"
+ ::={whispBoxStatus 80}
+
+ rfStatRangeCapEnf OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Range Cap Enforced Count"
+ ::={whispBoxStatus 81}
+
+ rfStatRcvLTStart OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Rcv LT Start Count"
+ ::={whispBoxStatus 82}
+
+ rfStatRcvLTStartHS OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Rcv LT Start HS Count"
+ ::={whispBoxStatus 83}
+
+ rfStatRcvLTResult OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Rcv LT Result Count"
+ ::={whispBoxStatus 84}
+
+ rfStatXmtLTResult OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Xmt LT Result Count"
+ ::={whispBoxStatus 85}
+
+ whispFeatureKeyOrigin OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)"
+ ::={whispBoxStatus 86}
+
+ radioMSN OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MSN of the radio."
+ ::={whispBoxStatus 87}
+
+ updateStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Status of Device Update"
+ ::={whispBoxStatus 88}
+
+ syslogStatTxSuccesses OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The count of Syslog messages sent to UDP layer."
+ ::={whispBoxStatus 89}
+
+ syslogStatDropped OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of dropped syslog messages due to device overload and/or resource limitations."
+ ::={whispBoxStatus 90}
+
+ fecStatLinkLost OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet link lost count"
+ ::={whispBoxStatus 91}
+
+ fecStatLinkDetected OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet link detected count"
+ ::={whispBoxStatus 92}
+
+ natDhcpStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display NAT Public interface current DHPC status."
+ ::={whispBoxStatus 93}
+
+ fecInDiscardsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet in discards count."
+ ::={whispBoxStatus 94}
+
+ fecInErrorsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet in errors count."
+ ::={whispBoxStatus 95}
+
+ fecOutDiscardsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet out discards count."
+ ::={whispBoxStatus 96}
+
+ fecOutErrorsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet out errors count."
+ ::={whispBoxStatus 97}
+
+ rfInDiscardsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "RF in discards count. This attribute is deprecated. Use rfInDiscardsCountExt instead."
+ ::={whispBoxStatus 98}
+
+ rfInErrorsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "RF in errors count. This attribute is deprecated. Use rfInErrorsCountExt instead."
+ ::={whispBoxStatus 99}
+
+ rfOutDiscardsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "RF out discards count. This attribute is deprecated. Use rfOutDiscardsCountExt instead."
+ ::={whispBoxStatus 100}
+
+ rfOutErrorsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "RF out errors count. This attribute is deprecated. Use rfOutErrorsCountExt instead."
+ ::={whispBoxStatus 101}
+
+ fecInDiscardsOverloadCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet in discards overload."
+ ::={whispBoxStatus 102}
+
+ fecOutDiscardsOverloadCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet out discards overload."
+ ::={whispBoxStatus 103}
+
+ rfInDiscardsOverloadCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rf in discards overload."
+ ::={whispBoxStatus 104}
+
+ rfOutDiscardsOverloadCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rf out discards overload."
+ ::={whispBoxStatus 105}
+
+ fpgaCompileInfo OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display the fpga compiled attributes. (Engineering Only)"
+ ::={whispBoxStatus 106}
+
+ fpgaBuildDate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Display the entire fpga build date string. (Engineering Only)"
+ ::={whispBoxStatus 107}
+
+ aggregateBandwidthCap OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum aggregate (uplink + downlink) the radio is capable of."
+ ::={whispBoxStatus 108}
+
+ calibrationStatusBool OBJECT-TYPE
+ SYNTAX INTEGER {
+ notCalibrated(0),
+ calibrated(1)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Boolean OID to show if device is calibrated.
+ Applicable to FSK and MIMO radios only."
+ ::={whispBoxStatus 109}
+
+ calibrationStatusBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "String to show if radio is calibrated.
+ Applicable to FSK and MIMO radios only."
+ ::={whispBoxStatus 110}
+
+ radioEngKeyed OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied."
+ ::={whispBoxStatus 111}
+
+ bridgeCbFecStatfloods OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB FEC Stats Floods (Multipoint AP only)"
+ ::={whispBoxStatus 112}
+
+ bridgeCbRFStatfloods OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB RF Stats Floods (Multipoint AP only)"
+ ::={whispBoxStatus 113}
+
+ catalinaGainRxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rcv Gain on Catalina Rx CH1. Engineering use only."
+ ::={whispBoxStatus 114}
+
+ catalinaGainRxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rcv Gain on Catalina Rx CH2. Engineering use only."
+ ::={whispBoxStatus 115}
+
+ antType OBJECT-TYPE
+ SYNTAX INTEGER {
+ integrated(0),
+ external(1)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the antenna is integrated or external (connectorized)."
+ ::={whispBoxStatus 116}
+
+ rfStatRcvCorruptControlCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Receive Corrupt Control Data Count"
+ ::={whispBoxStatus 117}
+
+ numLBTDetections OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of LBT Detections since last boot."
+ ::={whispBoxStatus 118}
+
+ bridgeCbEthAuxStatbin OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats bin"
+ ::={whispBoxStatus 119}
+
+ bridgeCbEthAuxStatbout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats bout"
+ ::={whispBoxStatus 120}
+
+ catalinaAttenTxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Attenuation on Catalina Tx CH1. Engineering Use Only."
+ ::={whispBoxStatus 121}
+
+ catalinaAttenTxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Attenuation on Catalina Tx CH2. Engineering use only."
+ ::={whispBoxStatus 122}
+
+ catalinaCurrDetSetpointTxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Detector Setpoint on Catalina Tx CH1. Engineering Use Only."
+ ::={whispBoxStatus 123}
+
+ catalinaCurrDetSetpointTxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Detector Setpoint on Catalina Tx CH2. Engineering use only."
+ ::={whispBoxStatus 124}
+
+ catalinaCurrDetReadRefTxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Detector Reference on Catalina Tx CH1. Engineering Use Only."
+ ::={whispBoxStatus 125}
+
+ catalinaCurrDetReadRefTxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Detector Reference on Catalina Tx CH2. Engineering use only."
+ ::={whispBoxStatus 126}
+
+ catalinaCurrDetReadPowerOnTxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Detector PowerOn on Catalina Tx CH1. Engineering Use Only."
+ ::={whispBoxStatus 127}
+
+ catalinaCurrDetReadPowerOnTxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Detector PowerOn on Catalina Tx CH2. Engineering use only."
+ ::={whispBoxStatus 128}
+
+ catalinaOpenLoopAttenTxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Open Loop Attenuation on Catalina Tx CH1. Engineering Use Only."
+ ::={whispBoxStatus 129}
+
+ catalinaOpenLoopAttenTxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Open Loop Attenuation on Catalina Tx CH2. Engineering use only."
+ ::={whispBoxStatus 130}
+
+ catalinaTargetDetSetpointTxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Target Detector Setpoint on Catalina Tx CH1. Engineering Use Only."
+ ::={whispBoxStatus 131}
+
+ catalinaTargetDetSetpointTxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Target Detector Setpoint on Catalina Tx CH2. Engineering use only."
+ ::={whispBoxStatus 132}
+
+ catalinaGainReductionRxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Gain Reduction on Catalina Rx CH1. Engineering Use Only."
+ ::={whispBoxStatus 133}
+
+ catalinaGainReductionRxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Gain Reduction on Catalina Rx CH2. Engineering use only."
+ ::={whispBoxStatus 134}
+
+ catalinaLoAttenRxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Lo Attenuation on Catalina Rx CH1. Engineering Use Only."
+ ::={whispBoxStatus 135}
+
+ catalinaLoAttenRxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Lo Attenuation on Catalina Rx CH2. Engineering use only."
+ ::={whispBoxStatus 136}
+
+ catalinaTargetGainRxCH1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Target Gain on Catalina Rx CH1. Engineering Use Only."
+ ::={whispBoxStatus 137}
+
+ catalinaTargetGainRxCH2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Target Gain on Catalina Rx CH2. Engineering use only."
+ ::={whispBoxStatus 138}
+
+ bridgeCbEthAuxStatfloods OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats Floods (Multipoint AP only)"
+ ::={whispBoxStatus 139}
+
+ bridgeCbEthAuxStatbtoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats btoss"
+ ::={whispBoxStatus 141}
+
+ bridgeCbEthAuxStatbtosscap OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats btosscap"
+ ::={whispBoxStatus 142}
+
+ bridgeCbEthAuxStatuin OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats uin"
+ ::={whispBoxStatus 143}
+
+ bridgeCbEthAuxStatuout OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats uout"
+ ::={whispBoxStatus 144}
+
+ bridgeCbEthAuxStatutoss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats utoss"
+ ::={whispBoxStatus 145}
+
+ bridgeCbEthAuxStatutosscap OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridge CB Eth Aux Stats utosscap"
+ ::={whispBoxStatus 146}
+
+ radioWatchDogLogged OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This will be set either as 0 if there is no watchdog event logged or 1 if there is."
+ ::={whispBoxStatus 147}
+
+ radioFatalErrorLogged OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This will be set either as 0 if there is no fatalerror event logged or 1 if there is."
+ ::={whispBoxStatus 148}
+
+ fecStatLinkUptime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Uptime of main ethernet link in seconds"
+ ::={whispBoxStatus 149}
+
+ fecAuxStatLinkUptime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Uptime of main ethernet link in seconds"
+ ::={whispBoxStatus 150}
+
+ rfStatXmtMDataCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Transmit Multicast Data Count"
+ ::={whispBoxStatus 217}
+
+ rfStatRcvMDataCnt OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RF Scheduler Stats Receive Multicast Data Count"
+ ::={whispBoxStatus 218}
+
+ fecStatUnderSizedToss OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Undersized Toss Count"
+ ::={whispBoxStatus 219}
+
+ fecRxBabErr OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error count in Babble Receiver."
+ ::={whispBoxStatus 220}
+
+ fecTxHbErr OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets having Transmit heartbeat error."
+ ::={whispBoxStatus 221}
+
+ fecEthBusErr OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ethernet Busy Error Count"
+ ::={whispBoxStatus 222}
+
+ fecCRCError OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets having CRC Error."
+ ::={whispBoxStatus 223}
+
+ fecRxFifoNoBuf OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times could not get a buffer from Rx Fifo."
+ ::={whispBoxStatus 224}
+
+ fecRxOverrun OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times Rx Fifo Overrun."
+ ::={whispBoxStatus 225}
+
+ fecLateCollision OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets having late collision."
+ ::={whispBoxStatus 226}
+
+ fecRetransLimitExp OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets whose retransmision limit expired."
+ ::={whispBoxStatus 227}
+
+ fecTxUnderrun OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of times Tx queue underrun."
+ ::={whispBoxStatus 228}
+
+ fecCarSenseLost OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Carrier Sense Lost count."
+ ::={whispBoxStatus 229}
+
+ fecNoCarrier OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "No carrier asserted by external transceiver during transmission."
+ ::={whispBoxStatus 230}
+
+ framePeriodCurrent OBJECT-TYPE
+ SYNTAX INTEGER {
+ twoPointFiveMs(0),
+ fiveMs(1),
+ scanning(2)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current frame period of the radio."
+ ::={whispBoxStatus 231}
+
+ activeTxPowerStr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit power level, including potential power backoff information.
+ Not applicable to PMP 450m."
+ ::={whispBoxStatus 232}
+
+ activeTxPowerHdths OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current transmit power level, in hundredths of dBm.
+ Not appliable on PMP 450m."
+ ::={whispBoxStatus 233}
+
+ poeT2Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ notPresent(1),
+ notPresentAndIgnored(2),
+ present(3)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the 802.3at Type 2 Classification status. This is only available on the 450i."
+ ::={whispBoxStatus 234}
+
+ fecAuxStatLinkDetected OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet link detected count"
+ ::={whispBoxStatus 235}
+
+ fecAuxStatLinkLost OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet ink lost count"
+ ::={whispBoxStatus 236}
+
+ fecAuxInDiscardsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet in discards count."
+ ::={whispBoxStatus 237}
+
+ fecAuxInErrorsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet in errors count."
+ ::={whispBoxStatus 238}
+
+ fecAuxOutDiscardsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet out discards count."
+ ::={whispBoxStatus 239}
+
+ fecAuxOutErrorsCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet out errors count."
+ ::={whispBoxStatus 240}
+
+ fecAuxCRCError OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Number of packets having CRC Error."
+ ::={whispBoxStatus 241}
+
+ fecAuxRxOverrun OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Number of times Rx Fifo Overrun."
+ ::={whispBoxStatus 242}
+
+ fecAuxLateCollision OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Number of packets having late collision."
+ ::={whispBoxStatus 243}
+
+ fecAuxRetransLimitExp OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Number of packets whose retransmision limit expired."
+ ::={whispBoxStatus 244}
+
+ fecAuxTxUnderrun OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Number of times Tx queue underrun."
+ ::={whispBoxStatus 245}
+
+ fecAuxCarSenseLost OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Carrier Sense Lost count."
+ ::={whispBoxStatus 246}
+
+ fecAuxNoCarrier OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet No carrier asserted by external transceiver during transmission."
+ ::={whispBoxStatus 247}
+
+ fecAuxLargeFrame OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Large Frame Error."
+ ::={whispBoxStatus 248}
+
+ fecAuxRuntFrame OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "450i Aux Ethernet Runt Frame Error."
+ ::={whispBoxStatus 249}
+
+ fecLargeFrame OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Large Frame Error."
+ ::={whispBoxStatus 250}
+
+ fecRuntFrame OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Runt Frame Error."
+ ::={whispBoxStatus 251}
+
+ soundingStatClear OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sounding Stat Clear
+ Set to any value to clear all Sounding Stats"
+ ::={whispBoxStatus 252}
+
+ soundingStatRequestCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Request Count"
+ ::={whispBoxStatus 253}
+
+ soundingStatResponseCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Response Count"
+ ::={whispBoxStatus 254}
+
+ soundingStatRequestsIgnored OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Requests Ignored"
+ ::={whispBoxStatus 255}
+
+ soundingStatAvgRequestInterval OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Avg Request Interval (ms)"
+ ::={whispBoxStatus 256}
+
+ soundingStatMaxRequestInterval OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Max Request Interval (ms)"
+ ::={whispBoxStatus 257}
+
+ soundingStatErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Error Count"
+ ::={whispBoxStatus 258}
+
+ camAccID OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "CnMaestro Account to which Radio is onboarded."
+ ::={whispBoxStatus 259}
+
+ cnMaestroStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "CnMaestro connection status."
+ ::={whispBoxStatus 260}
+
+ daVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device Agent Version number."
+ ::={whispBoxStatus 261}
+
+ soundingStatRequestsDropped OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Requests Dropped"
+ ::={whispBoxStatus 262}
+
+ soundingStatResponsesSuppressed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Responses Suppressed"
+ ::={whispBoxStatus 263}
+
+ soundingStatVersionMismatch OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sounding Stats Version Mismatch"
+ ::={whispBoxStatus 264}
+
+ hardwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Read directly from the resistors on the board is the form Major.Minor (cnMedusa-specific, Engineering Only)"
+ ::={whispBoxStatus 265}
+
+ productTypeName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Basic product type, based on board type and factory programming."
+ ::={whispBoxStatus 266}
+
+ radioStatusTransmitControlOverridden OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Transmit mode control is overridden in config
+ PMP 450m only."
+ ::={whispBoxStatus 267}
+
+ radioStatusTrackingFailure OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Feedback tracking loop is out of tolerance - Transmit disabled
+ PMP 450m only."
+ ::={whispBoxStatus 268}
+
+ radioStatusSectorWeightsOff OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sector mode weights disabled
+ PMP 450m only."
+ ::={whispBoxStatus 269}
+
+ radioStatusRxBeamFormingOff OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Rx beamforming disabled
+ PMP 450m only."
+ ::={whispBoxStatus 270}
+
+ radioStatusPowerDetectorInactive OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power detector control not active
+ PMP 450m only."
+ ::={whispBoxStatus 271}
+
+ radioStatusCatQuadCalFail OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Catalina Tx quadrature calibration failure
+ 450 platform only. Engineering use only."
+ ::={whispBoxStatus 272}
+
+ nearFieldOperationActive OBJECT-TYPE
+ SYNTAX INTEGER {
+ true(1),
+ false(0)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When true(1) near field operation is enabled and near
+ field range correction is being applied.
+ PMP 450m only."
+ ::={whispBoxStatus 273}
+
+ radioStatusAlarmReason OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reason code associated with the cause of a Radio Status Alarm being triggered.
+ Provide this code to Cambium Networks Support.
+ PMP 450m only."
+ ::={whispBoxStatus 274}
+
+ radioStatusAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ true(1),
+ false(0)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Radio Status Alarm.
+ PMP 450m only."
+ ::={whispBoxStatus 275}
+
+ forceReassessmentActive OBJECT-TYPE
+ SYNTAX INTEGER {
+ true(1),
+ false(0)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When true(1) forced channel assessment is enabled.
+ MU-MIMO only."
+ ::={whispBoxStatus 276}
+
+ fecExcessiveDeferrals OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Excessive Deferrals."
+ ::={whispBoxStatus 277}
+
+ rfInDiscardsCountExt OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extended RF in discards count with 64 bit counters."
+ ::={whispBoxStatus 278}
+
+ rfInErrorsCountExt OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extended RF in errors count with 64 bit counters."
+ ::={whispBoxStatus 279}
+
+ rfOutDiscardsCountExt OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extended RF out discards count with 64 bit counters."
+ ::={whispBoxStatus 280}
+
+ rfOutErrorsCountExt OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extended RF out errors count with 64 bit counters."
+ ::={whispBoxStatus 281}
+
+ boardModel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Returns Board model of the device."
+ ::={whispBoxStatus 284}
+
+-- The following definitions deal with Canopy Box Level configuration variables.
+
+ linkNegoSpeed OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Link negotiation speeds.
+ H10BT -- 10 Base T Half Duplex,
+ F10BT -- 10 Base T Full Duplex,
+ H100BT -- 100 Base T Half Duplex,
+ F100BT -- 100 Base T Full Duplex.
+ Separate the values with comma when doing a set.
+ e.g. H10BT,F10BT,H100BT,F100BT"
+ ::={whispBoxConfig 1}
+
+ colorCode OBJECT-TYPE
+ SYNTAX INTEGER (0..254)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Color code."
+ ::={whispBoxConfig 2}
+
+ displayOnlyAccess OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "This variable is deprecated."
+ ::={whispBoxConfig 3}
+
+ fullAccess OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Full access password."
+ ::={whispBoxConfig 4}
+
+ webAutoUpdate OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "Seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Web page auto update in seconds. 0 means disabled."
+ ::={whispBoxConfig 5}
+
+ pass1Status OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Password 1(display only) status."
+ ::={whispBoxConfig 6}
+
+ pass2Status OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Password 2(full access) status."
+ ::={whispBoxConfig 7}
+
+ bridgeEntryTimeout OBJECT-TYPE
+ SYNTAX INTEGER (25..1440)
+ UNITS "minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Bridge table time out Range : 25 -- 1440 Minutes."
+ ::={whispBoxConfig 8}
+
+ snmpMibPerm OBJECT-TYPE
+ SYNTAX INTEGER {
+ readWrite(0),
+ readOnly(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Read/Write permission for MIB groups."
+ ::={whispBoxConfig 9}
+
+ bhTimingMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ timingMaster(1),
+ timeingSlave(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Variable to switch between Timing Master and Timing Slave.
+ For Backhaul units only."
+ ::={whispBoxConfig 10}
+
+ bhModulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ tenMbitsPerSecond(0),
+ twentyMbitsPerSecond(1)}
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Modulation scheme. For Backhaul units only. Only level 4
+ backhaul can be changed to 20Mbits/Second."
+ ::={whispBoxConfig 11}
+
+ powerControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ normal(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Power control.
+ FSK Only."
+ ::={whispBoxConfig 12}
+
+ extFilterDelay OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "nanoseconds"
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. External Filters Delay. For 900MHz FSK radios only."
+ ::={whispBoxConfig 13}
+
+ antennaGain OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "dBi"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "External Antenna Gain. For radios that uses an external antenna or the DFS feature.
+ Not applicable to PMP 450m."
+ ::={whispBoxConfig 14}
+
+ eirp OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "dBm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmit EIRP of radio.
+ PMP 450m only."
+ ::={whispBoxConfig 15}
+
+ dynamicLearning OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To enable VLAN dynamic learning."
+ ::={whispBoxConfig 16}
+
+ managementVID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management VLAN VID."
+ ::={whispBoxConfig 17}
+
+ agingTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Aging timeout."
+ ::={whispBoxConfig 18}
+
+ frameType OBJECT-TYPE
+ SYNTAX INTEGER {
+ allframes(0),
+ taggedonly(1),
+ untaggedonly(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow only tagged frame."
+ ::={whispBoxConfig 19}
+
+ addVlanMember OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Write-Only OID,Add VLAN number which needs to be added."
+ ::={whispBoxConfig 20}
+
+ removeVlanMember OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Write-only OID,Enter VLAN ID which needs to deleted.
+ If Vlan doesnot exist an error will be returned."
+ ::={whispBoxConfig 21}
+
+ scheduling OBJECT-TYPE
+ SYNTAX INTEGER {
+ hardware(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To use hardware or software scheduling"
+ ::={whispBoxConfig 22}
+
+ transmitterOP OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "dBm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transmitter output power. This is not available on OFDM SMs.
+ Not applicable for PMP 450m. See EIRP OID."
+ ::={whispBoxConfig 23}
+
+ bridgeEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(0),
+ disable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Disable or enable bridging functionality for a BH unit."
+ ::={whispBoxConfig 24}
+
+ fecEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Disable or enable FEC error correction functionality
+ for multipoint units."
+ ::={whispBoxConfig 25}
+
+ trapIP1 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap1."
+ ::={whispBoxConfig 26}
+
+ trapIP2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap2."
+ ::={whispBoxConfig 27}
+
+ trapIP3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap3."
+ ::={whispBoxConfig 28}
+
+ trapIP4 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap4."
+ ::={whispBoxConfig 29}
+
+ trapIP5 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap5."
+ ::={whispBoxConfig 30}
+
+ trapIP6 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap6."
+ ::={whispBoxConfig 31}
+
+ trapIP7 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap7."
+ ::={whispBoxConfig 32}
+
+ trapIP8 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap8."
+ ::={whispBoxConfig 33}
+
+ trapIP9 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap9."
+ ::={whispBoxConfig 34}
+
+ trapIP10 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Obsoleted. Configure with whispBoxDNS.trap10."
+ ::={whispBoxConfig 35}
+
+ commStringRWrite OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Read/Write Community string. This is a write-only OID."
+ ::={whispBoxConfig 36}
+
+ subnetMask OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 1."
+ ::={whispBoxConfig 37}
+
+ mngtIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 1."
+ ::={whispBoxConfig 38}
+
+ allowVIDAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(0),
+ disable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow or disallow local SM management VID access."
+ ::={whispBoxConfig 39}
+
+ setDefaultPlug OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If enabled parameters are set to Factory Defaults upon default plug mode detection."
+ ::={whispBoxConfig 40}
+
+ hwsCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(0),
+ disable(1)}
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "If enable, it ensures 6.0 compatibility with HWS."
+ ::={whispBoxConfig 41}
+
+ gpsInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ generateSyncSignal(0),
+ syncToReceivedSignalTimingPort(1),
+ syncToReceivedSignalPowerPort(2),
+ syncToiGPS(3),
+ autoSync(4),
+ autoSyncFreeRun(5)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Values 1, 2, 3 have been deprecated.
+ (0) Generate AP sync signal.
+ (1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync.
+ (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run.
+ (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run.
+ (4) AutoSync.
+ (5) AutoSync plus Free Run."
+ ::={whispBoxConfig 42}
+
+ ism OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable ISM on 5.7GHz frequency band radios."
+ ::={whispBoxConfig 43}
+
+ hiPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Enable Hi Priority Data Queue on BH radios."
+ ::={whispBoxConfig 44}
+
+ userName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User name.To create read-only user set userMode OID first.
+ Maximum of 4 users can exist in system."
+ ::={whispBoxConfig 45}
+
+ userPassword OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User password.To create read-only user set userMode OID first."
+ ::={whispBoxConfig 46}
+
+ userAccessLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User access level.To create read-only user set userMode OID first.
+ 1=TECH
+ 2=INSTALL
+ 3=ADMIN"
+ ::={whispBoxConfig 47}
+
+ deleteUser OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User name to remove."
+ ::={whispBoxConfig 48}
+
+ twoXRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "To enable or disable double rate."
+ ::={whispBoxConfig 49}
+
+ lanDhcpState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To enable or disable LAN Interface DHCP feature."
+ ::={whispBoxConfig 50}
+
+ sessionTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Timer for Telnet, Web and FTP sessions."
+ ::={whispBoxConfig 51}
+
+ vlanMemberSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ configured(0),
+ active(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specified the VLAN member source to display. 0=configured, 1=active configuration.
+ Note that this OID is internal to SNMP and is not available at the Web Interface."
+ ::={whispBoxConfig 52}
+
+ addCustomFreqList OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Add Custom Frequencies.
+ The frequencies can be in a variety of units up to KHz.
+ Frequencies can be added in a list separated by commas.
+ Example: 3550, 356000, 3450001.
+ A get will return the current custom frequency list.
+ Max string length entered cannot exceed 128 character.
+ Note if there is not enough room for all the frequencies none will be added.
+ Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz."
+ ::={whispBoxConfig 53}
+
+ removeCustomFreqList OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Remove Custom Frequencies.
+ The frequencies can be in a variety of units up to KHz.
+ Frequencies can be removed in a list separated by commas.
+ Example: 3550, 356000, 3450001.
+ A get will return the current custom frequencies.
+ Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz."
+ ::={whispBoxConfig 54}
+
+ allowColocation OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters."
+ ::={whispBoxConfig 55}
+
+ changeUsrPwd OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow to change the password of a given user of a given user. Usage: userName,password."
+ ::={whispBoxConfig 56}
+
+-- The following definitions deal with the allowed SNMP IP & subnet masks
+
+ mngtIP2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 2."
+ ::={whispBoxConfig 57}
+
+ subnetMask2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 2."
+ ::={whispBoxConfig 58}
+
+ mngtIP3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 3."
+ ::={whispBoxConfig 59}
+
+ subnetMask3 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 3."
+ ::={whispBoxConfig 60}
+
+ mngtIP4 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 4."
+ ::={whispBoxConfig 61}
+
+ subnetMask4 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 4."
+ ::={whispBoxConfig 62}
+
+ mngtIP5 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 5."
+ ::={whispBoxConfig 63}
+
+ subnetMask5 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 5."
+ ::={whispBoxConfig 64}
+
+ mngtIP6 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 6."
+ ::={whispBoxConfig 65}
+
+ subnetMask6 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 6."
+ ::={whispBoxConfig 66}
+
+ mngtIP7 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 7."
+ ::={whispBoxConfig 67}
+
+ subnetMask7 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 7."
+ ::={whispBoxConfig 68}
+
+ mngtIP8 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 8."
+ ::={whispBoxConfig 69}
+
+ subnetMask8 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 8."
+ ::={whispBoxConfig 70}
+
+ mngtIP9 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 9."
+ ::={whispBoxConfig 71}
+
+ subnetMask9 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 9."
+ ::={whispBoxConfig 72}
+
+ mngtIP10 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Management IP address 10."
+ ::={whispBoxConfig 73}
+
+ subnetMask10 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Subnet mask for the management IP 10."
+ ::={whispBoxConfig 74}
+
+ bhvlanEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To enable or disable VLAN for Backhaul Master/Slave."
+ ::={whispBoxConfig 75}
+
+ lldpBroadcastEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To enable Broadcast of LLDP message, if disabled LLDP uses multicast"
+ ::={whispBoxConfig 76}
+
+ regionCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ australia(6),
+ brazil(5),
+ canada(3),
+ india(8),
+ indonesia(10),
+ ireland(11),
+ russia(7),
+ spain(9),
+ us(2),
+ other(1),
+ europe(4)}
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Set Region Code for the Unit. Used the individual region[Region] OIDs instead."
+ ::={whispBoxConfig 77}
+
+ russiaRegion OBJECT-TYPE
+ SYNTAX INTEGER {
+ category1(1),
+ category2(2),
+ category3(3),
+ category4(4)}
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now."
+ ::={whispBoxConfig 78}
+
+ commStringROnly OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set Read Only commnunity string."
+ ::={whispBoxConfig 79}
+
+ ethernetLinkSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ forced10H(1),
+ forced10F(2),
+ forced100H(4),
+ forced100F(8),
+ auto10F-10H(3),
+ auto100H-10H(5),
+ auto100H-10F-10H(7),
+ auto100F-100H(12),
+ auto100F-100H-10H(13),
+ auto100F-100H-10F-10H(15),
+ auto1000F-100F-100H-10F-10H(63)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds."
+ ::={whispBoxConfig 80}
+
+ cyclicPrefix OBJECT-TYPE
+ SYNTAX INTEGER {
+ one-quarter(0),
+ one-eighth(1),
+ one-sixteenth(2),
+ one-quarter-one-eighth(3),
+ one-quarter-one-sixteenth(4),
+ one-eighth-one-sixteenth(5),
+ one-quarter-one-eighth-one-sixteenth(6)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Cyclic Prefix value, for OFDM Radios only.
+ Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode)."
+ ::={whispBoxConfig 81}
+
+ numberCustomFreq OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of custom frequencies added.
+ There is a maximum of 100.
+ For use on 3.5 GHz OFDM Radios only."
+ ::={whispBoxConfig 82}
+
+ channelBandwidth OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current channel bandwidth in MHz.
+ For use on OFDM Radios only.
+ Obsoleted for MIMO SMs."
+ ::={whispBoxConfig 83}
+
+ setDefaults OBJECT-TYPE
+ SYNTAX INTEGER {
+ noChangeOrUndoFactoryDefaults(0),
+ setToFactoryDefaults(1),
+ factoryDefaultsSet-AwaitingReboot(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0
+ will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting.
+ Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and
+ we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID
+ prior to reboot. As a security measure, this OID is only valid when the radio was booted in default plug
+ mode. If the radio is not currently in default plug mode, then attempting to set this OID will fail."
+ ::={whispBoxConfig 84}
+
+ radioRateAdapt OBJECT-TYPE
+ SYNTAX INTEGER {
+ onex(0),
+ onexmimo(4),
+ onextwox(1),
+ onextwoxmimo(5),
+ onextwoxthreex(2),
+ onextwoxthreexfourx(3),
+ onextwoxfourx(7),
+ onextwoxfourxsixx(8),
+ onextwoxfourxsixxeightx(9),
+ onextwoxmimoa(10),
+ onextwoxthreexmimoa(11),
+ onextwoxthreexfourxmimoa(12)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Rate adaptation parameter
+ 0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
+ 1: 1x/2x (FSK and SISO OFDM 16-QAM)
+
+ Following are OFDM only:
+ 2: 1x/2x/3x (SISO OFDM 64-QAM)
+ 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only
+
+ Following are MIMO OFDM only:
+ 4: 1x MIMO-A (QPSK duplicated on both paths)
+ 5: 1x/2x MIMO-B (QPSK on each path)
+ 7: 1x/2x/4x MIMO-B (16-QAM on each path)
+ 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
+ 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
+ 10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
+ 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
+ 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)
+
+ For PMP 430 radios this applies to Downlink Rate Adapt only.
+ Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios.
+ For PMP 450 radios, write access for engineering use only."
+ ::={whispBoxConfig 85}
+
+ siteInfoViewable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable non login users the ability to view Site Information"
+ ::={whispBoxConfig 86}
+
+ largeVCQ OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed."
+ ::={whispBoxConfig 87}
+
+ latitude OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The latitude setting of this unit in decimal degrees."
+ ::={whispBoxConfig 88}
+
+ longitude OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The longitude setting of this unit in decimal degrees."
+ ::={whispBoxConfig 89}
+
+ height OBJECT-TYPE
+ SYNTAX INTEGER (-2147483647..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The height setting of this unit in meters."
+ ::={whispBoxConfig 90}
+
+ bandwidth OBJECT-TYPE
+ SYNTAX INTEGER {
+ bandwidth5mhz(1),
+ bandwidth7mhz(2),
+ bandwidth10mhz(3),
+ bandwidth15mhz(4),
+ bandwidth20mhz(5),
+ bandwidth30mhz(6),
+ bandwidth40mhz(7)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Radio bandwidth setting.
+ Obsoleted for MIMO SMs. Instead for MIMO SMs use OID bandwidthScan."
+ ::={whispBoxConfig 91}
+
+ dataScramblingMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ legacyDataScrambling(0),
+ r10DataScrambling(1)}
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "This OID is for OFDM only and is obsolete."
+ ::={whispBoxConfig 92}
+
+ portVID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Backhaul Port VID (PVID)."
+ ::={whispBoxConfig 93}
+
+ radioRateAdaptUL OBJECT-TYPE
+ SYNTAX INTEGER {
+ onex(0),
+ onexmimo(4),
+ onextwox(1),
+ onextwoxmimo(5),
+ onextwoxthreex(2),
+ onextwoxthreexfourx(3),
+ onextwoxfourx(7),
+ onextwoxfourxsixx(8),
+ onextwoxfourxsixxeightx(9),
+ onextwoxmimoa(10),
+ onextwoxthreexmimoa(11),
+ onextwoxthreexfourxmimoa(12)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Uplink Rate adaptation parameter
+ 0: 1x No rate adaptation (FSK and SISO OFDM QPSK)
+ 1: 1x/2x (FSK and SISO OFDM 16-QAM)
+
+ Following are OFDM only:
+ 2: 1x/2x/3x (SISO OFDM 64-QAM)
+ 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only
+
+ Following are MIMO OFDM only:
+ 4: 1x MIMO-A (QPSK duplicated on both paths)
+ 5: 1x/2x MIMO-B (QPSK on each path)
+ 7: 1x/2x/4x MIMO-B (16-QAM on each path)
+ 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path)
+ 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path)
+ 10: 1x/2x MIMO-A (16-QAM duplicated on both paths)
+ 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths)
+ 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths)
+
+ For PMP 430 radios this applies to Uplink Rate Adapt only.
+ Use radioRateAdapt for setting downlink rate adapt on PMP 430 radios.
+ For PMP 450 radios, engineering use only."
+ ::={whispBoxConfig 94}
+
+ providerVID OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Provider VID for QinQ VLAN."
+ ::={whispBoxConfig 95}
+
+ mac1VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 1 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 96}
+
+ mac1VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 1 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 97}
+
+ mac2VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 2 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 98}
+
+ mac2VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 2 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 99}
+
+ mac3VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 3 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 100}
+
+ mac3VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 3 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 101}
+
+ mac4VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 4 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 102}
+
+ mac4VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 4 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 103}
+
+ mac5VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 5 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 104}
+
+ mac5VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 5 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 105}
+
+ mac6VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 6 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 106}
+
+ mac6VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 6 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 107}
+
+ mac7VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 7 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 108}
+
+ mac7VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 7 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 109}
+
+ mac8VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 8 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 110}
+
+ mac8VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 8 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 111}
+
+ mac9VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 9 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 112}
+
+ mac9VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 9 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 113}
+
+ mac10VIDMapAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "MAC Address for Entry 10 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 114}
+
+ mac10VIDMapVid OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID for Entry 10 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 115}
+
+ vlanPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ q(0),
+ qinq(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VLAN Port Type for VLAN interface. Default is Q."
+ ::={whispBoxConfig 116}
+
+ vlanAcceptQinQFrames OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP."
+ ::={whispBoxConfig 117}
+
+ whispWebUserAccessMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ local(0),
+ remote(1),
+ remotethenlocal(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable selects if web page users for the radio should be authenticated locally or
+ via a centralised remote Radius server"
+ ::={whispBoxConfig 118}
+
+ usrAccountEnableAccounting OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ deviceAccess(1),
+ dataUsage(2),
+ all(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select the level of accounting information to be reported to the server"
+ ::={whispBoxConfig 119}
+
+ allowRejectThenLocal OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotAllowLocalAuthifAAAReject(0),
+ allowLocalAuthIfAAAReject(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Control for allowing local authenication if the AAA remote server"
+ ::={whispBoxConfig 120}
+
+ snrCalculation OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance."
+ ::={whispBoxConfig 121}
+
+ priorityPrecedence OBJECT-TYPE
+ SYNTAX INTEGER {
+ eight021pThenDiffServ(0),
+ diffservThenEight021p(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions."
+ ::={whispBoxConfig 122}
+
+ installationColorCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled
+ in order to facilitate remote provisioning."
+ ::={whispBoxConfig 123}
+
+ apSmMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ sm(1),
+ ap(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP.
+ Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP."
+ ::={whispBoxConfig 124}
+
+ pppoeFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set PPPoE packet filter."
+ ::={whispBoxConfig 125}
+
+ smbFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set SMB packet filter."
+ ::={whispBoxConfig 126}
+
+ snmpFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set SNMP packet filter."
+ ::={whispBoxConfig 127}
+
+ userP1Filter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 1 packet filter."
+ ::={whispBoxConfig 128}
+
+ userP2Filter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 2 packet filter."
+ ::={whispBoxConfig 129}
+
+ userP3Filter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 3 packet filter."
+ ::={whispBoxConfig 130}
+
+ allOtherIpFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set all other IPv4 packet filter."
+ ::={whispBoxConfig 131}
+
+ allIpv4Filter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
+ IPv4 Mcast, User Defined Ports, and All Other IPv4)."
+ ::={whispBoxConfig 132}
+
+ arpFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set ARP packet filter."
+ ::={whispBoxConfig 133}
+
+ allOthersFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set all other packet filter when."
+ ::={whispBoxConfig 134}
+
+-- User Defined Port Filtering Configuration
+
+ userDefinedPort1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An integer value of number one user defined port. Range:0-65535"
+ ::={whispBoxConfig 135}
+
+ port1TCPFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 1 TCP traffic filter."
+ ::={whispBoxConfig 136}
+
+ port1UDPFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 1 UDP traffic filter."
+ ::={whispBoxConfig 137}
+
+ userDefinedPort2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An integer value of number two user defined port. Range:0-65535"
+ ::={whispBoxConfig 138}
+
+ port2TCPFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 2 TCP traffic filter."
+ ::={whispBoxConfig 139}
+
+ port2UDPFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 2 UDP traffic filter."
+ ::={whispBoxConfig 140}
+
+ userDefinedPort3 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An integer value of number three user defined port. Range:0-65535"
+ ::={whispBoxConfig 141}
+
+ port3TCPFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 3 TCP traffic filter."
+ ::={whispBoxConfig 142}
+
+ port3UDPFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set user defined port 3 UDP traffic filter."
+ ::={whispBoxConfig 143}
+
+ bootpcFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set bootp client sourced packets filter."
+ ::={whispBoxConfig 144}
+
+ bootpsFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set bootp server sourced packets filter."
+ ::={whispBoxConfig 145}
+
+ ip4MultFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set IPv4 MultiCast packets filter when
+ NAT is disabled."
+ ::={whispBoxConfig 146}
+
+ packetFilterDirection OBJECT-TYPE
+ SYNTAX INTEGER {
+ upstream(1),
+ downstream(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set packet filter direction. Upstream is default."
+ ::={whispBoxConfig 147}
+
+ encryptionConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ des(0),
+ aes(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "For supported radio, set the encryption algorithm to use.
+ DES by default. Cannot be set if encryption is disabled."
+ ::={whispBoxConfig 148}
+
+ pppoeCtlPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ normal(0),
+ high(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Prioritization of PPPoE Control packets."
+ ::={whispBoxConfig 149}
+
+ ftpPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port used to for FTP. Default is 21."
+ ::={whispBoxConfig 150}
+
+ httpPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port used to for HTTP. Default is 80."
+ ::={whispBoxConfig 151}
+
+ httpsPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port used to for HTTPs. Default is 443."
+ ::={whispBoxConfig 152}
+
+ snmpPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port used to for SNMP. Default is 161."
+ ::={whispBoxConfig 153}
+
+ snmpTrapPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port used to for SNMP Traps. Default is 162."
+ ::={whispBoxConfig 154}
+
+ webAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ http(0),
+ https(1),
+ http-and-https(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable determines if only HTTP or HTTPs connection are allowed.
+ 0: HTTP Only
+ 1: HTTPs Only
+ 2: HTTP and HTTPs Both"
+ ::={whispBoxConfig 155}
+
+ syslogDomainNameAppend OBJECT-TYPE
+ SYNTAX INTEGER {
+ disableDomain(0),
+ appendDomain(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select whether to append the configured management domain name to
+ the Syslog server name. For example, if dnsMgmtDomainName is
+ set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend
+ is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'."
+ ::={whispBoxConfig 156}
+
+ syslogServerAddr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name"
+ ::={whispBoxConfig 157}
+
+ syslogServerPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Listening port on the Syslog server. Default is 514."
+ ::={whispBoxConfig 158}
+
+ syslogMinLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ fatal(0),
+ alert(1),
+ critical(2),
+ error(3),
+ warning(4),
+ notice(5),
+ info(6),
+ debug(7)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted."
+ ::={whispBoxConfig 159}
+
+ allIpv6Filter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set all IPv6 packet filter. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp,
+ IPv6 Mcast, User Defined Ports, and All Other IPv6)."
+ ::={whispBoxConfig 160}
+
+ ipv6smbFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set IPv6 SMB packet filter."
+ ::={whispBoxConfig 161}
+
+ ipv6snmpFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set IPv6 SNMP packet filter."
+ ::={whispBoxConfig 162}
+
+ ipv6bootpcFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set IPv6 bootp client sourced packets filter."
+ ::={whispBoxConfig 163}
+
+ ipv6bootpsFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set IPv6 bootp server sourced packets filter."
+ ::={whispBoxConfig 164}
+
+ ipv6MultFilter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set IPv6 MultiCast packets filter when
+ NAT is disabled."
+ ::={whispBoxConfig 165}
+
+ allOtherIpv6Filter OBJECT-TYPE
+ SYNTAX INTEGER {
+ filterOff(0),
+ filterOn(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To set all other IPv6 packet filter."
+ ::={whispBoxConfig 166}
+
+ snmpStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ snmpv2only(1),
+ snmpv3only(2),
+ snmpv2-and-snmpv3(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable determines SNMP operation mode.
+ 1: Enable SNMPv2c only
+ 2: Enable SNMPv3 only
+ 3: Enable SNMPv2c and SNMPv3"
+ ::={whispBoxConfig 167}
+
+ telnetStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabletelnet(0),
+ enabletelnet(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable determines if Telnet to enabled or not.
+ 0: Disable Telnet
+ 1: Enable Telnet"
+ ::={whispBoxConfig 168}
+
+ ftpStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disableftp(0),
+ enableftp(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable determines if FTP to enabled or not.
+ 0: Disable FTP
+ 1: Enable FTP"
+ ::={whispBoxConfig 169}
+
+ tftpStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabletftp(0),
+ enabletftp(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable determines if TFTP is enabled or not.
+ 0: Disable TFTP
+ 1: Enable TFTP"
+ ::={whispBoxConfig 170}
+
+ userMode OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "User Mode 1=Read-Only 0=Read-Write(default)."
+ ::={whispBoxConfig 171}
+
+ tcpAckPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Prioritize TCP ACK that are 64 bytes or less."
+ ::={whispBoxConfig 172}
+
+ codePointSelect OBJECT-TYPE
+ SYNTAX INTEGER {
+ cp1(1),
+ cp2(2),
+ cp3(3),
+ cp4(4),
+ cp5(5),
+ cp6(6),
+ cp7(7),
+ cp8(8),
+ cp9(9),
+ cp10(10),
+ cp11(11),
+ cp12(12),
+ cp13(13),
+ cp14(14),
+ cp15(15),
+ cp16(16),
+ cp17(17),
+ cp18(18),
+ cp19(19),
+ cp20(20),
+ cp21(21),
+ cp22(22),
+ cp23(23),
+ cp24(24),
+ cp25(25),
+ cp26(26),
+ cp27(27),
+ cp28(28),
+ cp29(29),
+ cp30(30),
+ cp31(31),
+ cp32(32),
+ cp33(33),
+ cp34(34),
+ cp35(35),
+ cp36(36),
+ cp37(37),
+ cp38(38),
+ cp39(39),
+ cp40(40),
+ cp41(41),
+ cp42(42),
+ cp43(43),
+ cp44(44),
+ cp45(45),
+ cp46(46),
+ cp47(47),
+ cp49(49),
+ cp50(50),
+ cp51(51),
+ cp52(52),
+ cp53(53),
+ cp54(54),
+ cp55(55),
+ cp57(57),
+ cp58(58),
+ cp59(59),
+ cp60(60),
+ cp61(61),
+ cp62(62),
+ cp63(63)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Codepoint Select.This represents the CodePoint Selection to be modified via Priority Select"
+ ::={whispBoxConfig 173}
+
+ prioritySelect OBJECT-TYPE
+ SYNTAX INTEGER {
+ p0(0),
+ p1(1),
+ p2(2),
+ p3(3),
+ p4(4),
+ p5(5),
+ p6(6),
+ p7(7)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Priority Select.The priority setting input for the CodePoint selected in CodePoint Select."
+ ::={whispBoxConfig 174}
+
+ auxPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable(1) or Disable(0) aux ethernet port on 450i radio"
+ ::={whispBoxConfig 175}
+
+ poeAuxEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable(1) or Disable(0) aux ethernet port PoE on 450i radio"
+ ::={whispBoxConfig 176}
+
+ whispUsrAuth OBJECT-TYPE
+ SYNTAX INTEGER {
+ md5(0),
+ peap-mschapv2(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select method for User Authentication."
+ ::={whispBoxConfig 177}
+
+ lan1DhcpRelease OBJECT-TYPE
+ SYNTAX INTEGER {
+ releaseIP(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to '1' will release LAN1's IP address
+ and send a DHCP Release Message to the DHCP server.
+ Applicable only when NAT is disabled."
+ ::={whispBoxConfig 201}
+
+ lan1DhcpRenew OBJECT-TYPE
+ SYNTAX INTEGER {
+ renewIP(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to '1' will renew LAN1's lease time
+ for its current IP address.
+ Applicable only when NAT is disabled."
+ ::={whispBoxConfig 202}
+
+ lan3DhcpRelease OBJECT-TYPE
+ SYNTAX INTEGER {
+ releaseIP(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to '1' will release LAN3's (RF Public) IP address
+ and send a DHCP Release Message to the DHCP server.
+ Applicable only when NAT is enabled."
+ ::={whispBoxConfig 203}
+
+ lan3DhcpRenew OBJECT-TYPE
+ SYNTAX INTEGER {
+ renewIP(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to '1' will renew LAN3's (RF Public)
+ lease time for its current IP address.
+ Applicable only when NAT is enabled."
+ ::={whispBoxConfig 204}
+
+ natDhcpRelease OBJECT-TYPE
+ SYNTAX INTEGER {
+ releaseIP(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to '1' will release WAN's (NAT Public) IP address
+ and send a DHCP Release Message to the DHCP server.
+ Applicable only when NAT is enabled."
+ ::={whispBoxConfig 205}
+
+ natDhcpRenew OBJECT-TYPE
+ SYNTAX INTEGER {
+ renewIP(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to '1' will renew WAN's (NAT Public)
+ lease time for its current IP address.
+ Applicable only when NAT is enabled."
+ ::={whispBoxConfig 206}
+
+ region OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ otherRegulatory(1),
+ asia(6),
+ europe(3),
+ northAmerica(2),
+ oceania (5),
+ southAmerica(4),
+ africa(7)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Set Region Code for the Unit."
+ ::={whispBoxConfig 207}
+
+ regionAsia OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ india(2),
+ indonesia(3),
+ russiacategory1(4),
+ russiacategory2(5),
+ russiacategory3(6),
+ russiacategory4(7),
+ vietnam(8),
+ malaysia(10),
+ pakistan(11)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Country Code for Asia."
+ ::={whispBoxConfig 208}
+
+ regionEurope OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ spain(2),
+ ireland(3),
+ denmark(4),
+ finland(5),
+ germany(6),
+ greece(7),
+ iceland(8),
+ liechtenstein(9),
+ norway(10),
+ portugal(11),
+ switzerland(12),
+ serbia(13),
+ unitedkingdom(14),
+ other(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Country Code for Europe. Other is only available for units with EU Region Lock."
+ ::={whispBoxConfig 209}
+
+ regionNorthAmerica OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ canada(3),
+ unitedStates(2),
+ mexico(4),
+ puertoRico(5)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Country Code for North America."
+ ::={whispBoxConfig 210}
+
+ regionOceania OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ australia(2),
+ newZealand(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Country Code for Oceania."
+ ::={whispBoxConfig 211}
+
+ regionSouthAmerica OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ brazil(2),
+ ecuador(3),
+ colombia(4),
+ venezuela(5),
+ panama(6)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Country Code for South America."
+ ::={whispBoxConfig 212}
+
+ regionOtherRegulatory OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ other(1),
+ fcc(2),
+ etsi(3),
+ etsilbt(4)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Regulatory setting for governing regulatory body."
+ ::={whispBoxConfig 213}
+
+ interleave OBJECT-TYPE
+ SYNTAX INTEGER {
+ default(0),
+ disabled(1),
+ enabled(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Engineering use only."
+ ::={whispBoxConfig 214}
+
+ receiveQualityDebug OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable or disable receive quality calculations for every packet.
+ Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH.
+ Default to disabled for all radios.
+ Only applicable to GenII OFDM products and up."
+ ::={whispBoxConfig 215}
+
+ apType OBJECT-TYPE
+ SYNTAX INTEGER {
+ standard(0),
+ remote(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "In standard mode, all possible sync sources will be made availble and usedfor autoSync operation.
+ In remote mode, sync over power port will not be available as a sync source.
+ Remote Device mode is where the AP or BHM timing port is connected to an SM or BHS timing port via a sync cable. In this mode,
+ GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other
+ sync over power device is in use, then select standard mode.
+ This should really be named deviceType because this applies to both AP and BHM, but left this as apType for legacy purposes."
+ ::={whispBoxConfig 216}
+
+ regionAfrica OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ algeria(2),
+ nigeria(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Country Code for Africa."
+ ::={whispBoxConfig 217}
+
+ addCustomFreqMimo OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'."
+ ::={whispBoxConfig 218}
+
+ removeCustomFreqMimo OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'."
+ ::={whispBoxConfig 219}
+
+ timedSpectrumAnalysisDurationBox OBJECT-TYPE
+ SYNTAX INTEGER (10..1000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds."
+ ::={whispBoxConfig 220}
+
+ spectrumAnalysisActionBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ stopSpectrumAnalysis(0),
+ startTimedSpectrumAnalysis(1),
+ startContinuousSpectrumAnalysis(2),
+ idleNoSpectrumAnalysis(3),
+ idleCompleteSpectrumAnalysis(4),
+ inProgressTimedSpectrumAnalysis(5),
+ inProgressContinuousSpectrumAnalysis(6),
+ notReady(7)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Start or stop timed or continuous Spectrum Analysis and also give status.
+ (0) - Stop Spectrum Analysis
+ (1) - Start Timed Spectrum Analysis
+ Note: AP/BHM will run Spectrum Analysis for the sector.
+ (2) - Start Continuous Spectrum Analysis
+ (3) - Idle, no Spectrum Analysis results.
+ (4) - Idle, Spectrum Analysis results available.
+ (5) - Timed or Remote Spectrum Analysis in progress.
+ (6) - Continuous Spectrum Analysis in progress.
+ Note: Continuous mode has a max of 24 hours.
+ (7) - Spectrum Analyzer not ready."
+ ::={whispBoxConfig 221}
+
+ mac1VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 1 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 222}
+
+ mac1VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 1 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 223}
+
+ mac2VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 2 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 224}
+
+ mac2VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 2 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 225}
+
+ mac3VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 3 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 226}
+
+ mac3VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 3 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 227}
+
+ mac4VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 4 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 228}
+
+ mac4VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 4 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 229}
+
+ mac5VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 5 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 230}
+
+ mac5VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 5 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 231}
+
+ mac6VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 6 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 232}
+
+ mac6VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 6 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 233}
+
+ mac7VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 7 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 234}
+
+ mac7VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 7 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 235}
+
+ mac8VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 8 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 236}
+
+ mac8VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 8 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 237}
+
+ mac9VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 9 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 238}
+
+ mac9VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 9 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 239}
+
+ mac10VIDMapPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority for Entry 10 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 240}
+
+ mac10VIDMapPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VID priority Mode for Entry 10 in MAC Address VID Mapping Table."
+ ::={whispBoxConfig 241}
+
+ managementVIDPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "management VID VID VLAN Priority."
+ ::={whispBoxConfig 242}
+
+ managementVIDPriorityMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ promote-IP-priority(0),
+ define-priority(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "management VID VLAN Priority Mode."
+ ::={whispBoxConfig 243}
+
+ remarkSrcVID OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Source VID to apply remarking on."
+ ::={whispBoxConfig 244}
+
+ addRemarkVID OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Add VLAN ID re-marking entry."
+ ::={whispBoxConfig 245}
+
+ addRemarkPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Add 802.1p re-mark entry."
+ ::={whispBoxConfig 246}
+
+ deleteRemarkVID OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Remove the VID re-marking for this source VID."
+ ::={whispBoxConfig 247}
+
+ deleteRemarkPriority OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Remove the priority re-marking for this source VID."
+ ::={whispBoxConfig 248}
+
+ mimoRateAdaptAlgorithm OBJECT-TYPE
+ SYNTAX INTEGER {
+ mimobmimoa(0),
+ mimobonly(1),
+ mimoaonly(2),
+ siso(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Engineering use only.
+ Control MIMO Rate Adapt Algorithm
+ 0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput
+ 1 = MIMO-B only
+ 2 = MIMO-A only
+ 3 = SISO only"
+ ::={whispBoxConfig 249}
+
+ controlMessages OBJECT-TYPE
+ SYNTAX INTEGER {
+ siso(1),
+ mimoa(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast)
+ 0 = MIMO-A
+ 1 = SISO
+ MIMO Control Messages is the recommended and default setting.
+ However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode.
+ Not applicable to PMP 450m."
+ ::={whispBoxConfig 250}
+
+ enableSecurityBanner OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Shows Security Banner at the time of login"
+ ::={whispBoxConfig 251}
+
+ vcDepth OBJECT-TYPE
+ SYNTAX INTEGER {
+ default(0),
+ eight(8),
+ sixteen(16),
+ thirty-two(32),
+ sixty-four(64),
+ one-two-eight(128)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VC Depth of radio. Not applicable with 450m.
+ Engineering use only."
+ ::={whispBoxConfig 252}
+
+ textSecurityBanner OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Security Banner to be dispalyed on login page.
+ Length should be maximum 1200 characters.Configuration from web UI can enter upto 1499 characters.
+ Only ASCII characters(0-9a-zA-Z,CR,LF) supported."
+ ::={whispBoxConfig 253}
+
+ acceptSecurityBanner OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "1: User must accept and acknowledge security banner before login.
+ 0: Accepting security banner is not mandatory and user can login without it."
+ ::={whispBoxConfig 254}
+
+ poeT2Classification OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "When disabled, the radio will ignore the 802.3at Type 2 classification. When enabled,
+ if 802.3at Type 2 PoE is not present, the board will start and log the problem but the
+ transmitter and PoE out will not be enabled due to the low input power. This is only
+ available on the 450i."
+ ::={whispBoxConfig 255}
+
+ simulatedAirDelay OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Simulated Air Delay. Engineering use only."
+ ::={whispBoxConfig 256}
+
+ cnMaestroEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable Remote management using cnMaestro."
+ ::={whispBoxConfig 257}
+
+ cnMaestroUrl OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "cnMaestro Server URL."
+ ::={whispBoxConfig 258}
+
+ camID OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Cambium Id for cnMaestro onboarding."
+ ::={whispBoxConfig 259}
+
+ camOnboardKey OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Onboarding key for cnMaestro onboarding."
+ ::={whispBoxConfig 260}
+
+ atexHazlocPowerLimit OBJECT-TYPE
+ SYNTAX INTEGER {
+ gasGroupA(0),
+ gasGroupB(1),
+ gasGroupC(2),
+ gasGroupD(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If radio is keyed for ATEX/HazLoc operation, these settings can
+ be used to limit maximum power output, per Gas Group specs."
+ ::={whispBoxConfig 261}
+
+ nearFieldRange OBJECT-TYPE
+ SYNTAX INTEGER (6..3000)
+ UNITS "feet"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Range in feet for near field operation. This is applied
+ only when nearFieldOperation is set to enable(1) and
+ eirp is 22dBm or below or when Engineering keyed.
+ The maximum range of 3000ft applies negligible correction.
+ PMP 450m only."
+ ::={whispBoxConfig 262}
+
+ nearFieldOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables operation in the near field. This is
+ effective only when an EIRP of 22 dBm or lower
+ is selected or when Engineering keyed.
+ PMP 450m only."
+ ::={whispBoxConfig 263}
+
+ defaultIPAccessEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable(1) or Disable(0) Default alternative LAN1 IP address"
+ ::={whispBoxConfig 264}
+
+ pingWdogEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "enable(1) or disable(0) ping watchdog."
+ ::={whispBoxConfig 265}
+
+ pingWdogIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPv4 address to ping in dotted decimal notation."
+ ::={whispBoxConfig 266}
+
+ pingWdogInterval OBJECT-TYPE
+ SYNTAX INTEGER (300..86400)
+ UNITS "Seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Intervals in seconds at which ping should be initiated."
+ ::={whispBoxConfig 267}
+
+ pingWdogRbtCnt OBJECT-TYPE
+ SYNTAX INTEGER (1..100)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Ping Failures count at which reboot should be initiated."
+ ::={whispBoxConfig 268}
+
+ forceReassessment OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Forces channel reassessment for all registered SMs.
+ This is effective only when an EIRP of 22 dBm or lower
+ is selected or when Engineering keyed.
+ MU-MIMO only."
+ ::={whispBoxConfig 275}
+
+ enable8023linkBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "To enable or disable 802.3 link."
+ ::={whispBoxConfig 276}
+
+ ethernetPortSelection OBJECT-TYPE
+ SYNTAX INTEGER {
+ mainPort(0),
+ sfpPort(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set/Get the Ethernet port used to bridge traffic. PMP 450m only."
+ ::={whispBoxConfig 278}
+
+ ethernetLinkSpeedSfp OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto1000FX(32),
+ auto1000F-100F(40),
+ forced1000FX(64),
+ auto2500F-1000F-100F(168)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set/Get Ethernet link speed and duplex settings of the SFP port. PMP 450m only. Please note that the Radio Recovery Console only supports auto1000F for the SFP."
+ ::={whispBoxConfig 279}
+
+-- Box level control.
+
+ saveFlash OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotSaveToFlash(0),
+ saveToFlash(1)}
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "This variable is currently deprecated."
+ ::={whispBoxControls 1}
+
+ reboot OBJECT-TYPE
+ SYNTAX INTEGER {
+ finishedReboot(0),
+ reboot(1),
+ fullReboot(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to 1 will reboot the unit. When the
+ unit finishes rebooting, it will be in finishedReboot state. Setting
+ the variable to 2 will perform a full reboot of a 450i radio, while
+ performing a normal reboot on other radios."
+ ::={whispBoxControls 2}
+
+ clearEventLog OBJECT-TYPE
+ SYNTAX INTEGER {
+ notClear(0),
+ clear(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to 1 will clear the event log."
+ ::={whispBoxControls 3}
+
+ rebootIfRequired OBJECT-TYPE
+ SYNTAX INTEGER {
+ rebootNotRequired(0),
+ rebootRequired(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting the variable to 1 will reboot the unit if reboot is required."
+ ::={whispBoxControls 4}
+
+ clearBERStats OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotClearBERStats(0),
+ clearBERStats(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats'
+ When action is complete."
+ ::={whispBoxControls 5}
+
+ updateDevice OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Use to update the software on the device"
+ ::={whispBoxControls 6}
+
+ importConfigFile OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set to URL to immediately download and apply configuration file"
+ ::={whispBoxControls 7}
+
+ exportConfigFile OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Set to URL to immediately export and upload configuration file"
+ ::={whispBoxControls 8}
+
+ undoUnitWideSavedChanges OBJECT-TYPE
+ SYNTAX INTEGER {
+ undoUnitWideSavedChanges(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting to 1 will undo unit wide saved changes"
+ ::={whispBoxControls 9}
+
+ resetPoEAux OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting to 1 will reset aux ethernet port PoE on 450i radio.
+ Port will be powered off for 2 seconds during the set call, which will delay the SNMP response."
+ ::={whispBoxControls 10}
+
+ whispBoxEvntLog OBJECT-TYPE
+ SYNTAX EventString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Event log for AP and SM."
+ ::={whispBoxEventLog 1}
+
+ whispBoxAttributesGroup OBJECT-GROUP
+ OBJECTS {
+ vlanAcceptQinQFrames,
+ providerVID,
+ mac1VIDMapAddr,
+ mac1VIDMapVid,
+ mac1VIDMapPriority,
+ mac1VIDMapPriorityMode,
+ mac2VIDMapAddr,
+ mac2VIDMapVid,
+ mac2VIDMapPriority,
+ mac2VIDMapPriorityMode,
+ mac3VIDMapAddr,
+ mac3VIDMapVid,
+ mac3VIDMapPriority,
+ mac3VIDMapPriorityMode,
+ mac4VIDMapAddr,
+ mac4VIDMapVid,
+ mac4VIDMapPriority,
+ mac4VIDMapPriorityMode,
+ mac5VIDMapAddr,
+ mac5VIDMapVid,
+ mac5VIDMapPriority,
+ mac5VIDMapPriorityMode,
+ mac6VIDMapAddr,
+ mac6VIDMapVid,
+ mac6VIDMapPriority,
+ mac6VIDMapPriorityMode,
+ mac7VIDMapAddr,
+ mac7VIDMapVid,
+ mac7VIDMapPriority,
+ mac7VIDMapPriorityMode,
+ mac8VIDMapAddr,
+ mac8VIDMapVid,
+ mac8VIDMapPriority,
+ mac8VIDMapPriorityMode,
+ mac9VIDMapAddr,
+ mac9VIDMapVid,
+ mac9VIDMapPriority,
+ mac9VIDMapPriorityMode,
+ mac10VIDMapAddr,
+ mac10VIDMapVid,
+ mac10VIDMapPriority,
+ mac10VIDMapPriorityMode,
+ vlanPortType,
+ portVID,
+ timedSpectrumAnalysisDurationBox,
+ spectrumAnalysisActionBox,
+ calibrationStatusBox,
+ calibrationStatusBool,
+ catalinaGainRxCH1,
+ catalinaGainRxCH2,
+ catalinaAttenTxCH1,
+ catalinaAttenTxCH2,
+ catalinaCurrDetSetpointTxCH1,
+ catalinaCurrDetSetpointTxCH2,
+ catalinaCurrDetReadRefTxCH1,
+ catalinaCurrDetReadRefTxCH2,
+ catalinaCurrDetReadPowerOnTxCH1,
+ catalinaCurrDetReadPowerOnTxCH2,
+ catalinaOpenLoopAttenTxCH1,
+ catalinaOpenLoopAttenTxCH2,
+ catalinaTargetDetSetpointTxCH1,
+ catalinaTargetDetSetpointTxCH2,
+ catalinaGainReductionRxCH1,
+ catalinaGainReductionRxCH2,
+ catalinaLoAttenRxCH1,
+ catalinaLoAttenRxCH2,
+ catalinaTargetGainRxCH1,
+ catalinaTargetGainRxCH2,
+ whispBoxSoftwareVer,
+ whispBoxFPGAVer,
+ whispBoxEsn,
+ whispBoxBoot,
+ boxTemperature,
+ boxDeviceType,
+ boxDeviceTypeID,
+ boxEncryption,
+ etherLinkStatus,
+ boxFrequency,
+ platformVer,
+ platformType,
+ dhcpLanIp,
+ dhcpLanSubnetMask,
+ dhcpLanGateway,
+ dhcpRfPublicIp,
+ dhcpRfPublicSubnetMask,
+ dhcpRfPublicGateway,
+ lanDhcpStatus,
+ rfPublicDhcpStatus,
+ natDhcpStatus,
+ inSyncCount,
+ outSyncCount,
+ pllOutLockCount,
+ txCalFailure,
+ swVersion,
+ pldVersion,
+ platformInfo,
+ antType,
+ antPolarization,
+ whispBoxP11Personality,
+ whispBoxP11FPGAType,
+ whispBoxP11BstrapFPGAVer,
+ numDFSDetections,
+ numLBTDetections,
+ rxOverrunPkts,
+ boxTemperatureC,
+ boxTemperatureF,
+ linkNegoSpeed,
+ installationColorCode,
+ colorCode,
+ displayOnlyAccess,
+ fullAccess,
+ webAutoUpdate,
+ pass1Status,
+ pass2Status,
+ bridgeEntryTimeout,
+ cnMaestroEnable,
+ cnMaestroUrl,
+ camID,
+ camOnboardKey,
+ camAccID,
+ cnMaestroStatus,
+ daVersion,
+ snmpMibPerm,
+ bhTimingMode,
+ powerControl,
+ extFilterDelay,
+ antennaGain,
+ eirp,
+ dynamicLearning,
+ managementVID,
+ managementVIDPriority,
+ managementVIDPriorityMode,
+ agingTimeout,
+ remarkSrcVID,
+ addRemarkVID,
+ addRemarkPriority,
+ deleteRemarkVID,
+ deleteRemarkPriority,
+ frameType,
+ addVlanMember,
+ removeVlanMember,
+ scheduling,
+ transmitterOP,
+ bridgeEnable,
+ fecEnable,
+ trapIP1,
+ trapIP2,
+ trapIP3,
+ trapIP4,
+ trapIP5,
+ trapIP6,
+ trapIP7,
+ trapIP8,
+ trapIP9,
+ trapIP10,
+ commStringRWrite,
+ subnetMask,
+ mngtIP,
+ allowVIDAccess,
+ setDefaultPlug,
+ hwsCompatibility,
+ gpsInput,
+ ism,
+ hiPriority,
+ userName,
+ userPassword,
+ userAccessLevel,
+ userMode,
+ deleteUser,
+ twoXRate,
+ lanDhcpState,
+ dnsIpState,
+ sessionTimeout,
+ vlanMemberSource,
+ addCustomFreqList,
+ removeCustomFreqList,
+ allowColocation,
+ changeUsrPwd,
+ mngtIP2,
+ subnetMask2,
+ mngtIP3,
+ subnetMask3,
+ mngtIP4,
+ subnetMask4,
+ mngtIP5,
+ subnetMask5,
+ mngtIP6,
+ subnetMask6,
+ mngtIP7,
+ subnetMask7,
+ mngtIP8,
+ subnetMask8,
+ mngtIP9,
+ subnetMask9,
+ mngtIP10,
+ subnetMask10,
+ bhvlanEnable,
+ lldpBroadcastEnable,
+ radioRateAdapt,
+ boardModel,
+ productTypeName,
+ fpgaBuildDate,
+ fpgaCompileInfo,
+ syslogDomainNameAppend,
+ syslogServerAddr,
+ syslogServerPort,
+ syslogMinLevel,
+ pingWdogEnable,
+ pingWdogIP,
+ pingWdogInterval,
+ pingWdogRbtCnt,
+ syslogStatTxSuccesses,
+ syslogStatDropped,
+ apType,
+ apSmMode,
+ region,
+ regionCode,
+ regionAsia,
+ regionEurope,
+ regionNorthAmerica,
+ regionOceania,
+ regionSouthAmerica,
+ regionAfrica,
+ regionOtherRegulatory,
+ mimoRateAdaptAlgorithm,
+ radioRateAdaptUL,
+ tcpAckPriority,
+ dnsPrimaryMgmtIP,
+ dnsAlternateMgmtIP,
+ dnsMgmtDomainName,
+ auxPortEnable,
+ defaultIPAccessEnable,
+ poeAuxEnable,
+ addCustomFreqMimo,
+ removeCustomFreqMimo,
+ snmpv2cEnable,
+ nearFieldRange,
+ nearFieldOperation,
+ nearFieldOperationActive,
+ forceReassessment,
+ forceReassessmentActive,
+ ftpPort,
+ httpPort,
+ httpsPort,
+ snmpPort,
+ snmpTrapPort,
+ webAccess,
+ snmpStatus,
+ telnetStatus,
+ ftpStatus,
+ tftpStatus,
+ lan1DhcpRelease,
+ lan1DhcpRenew,
+ lan3DhcpRelease,
+ lan3DhcpRenew,
+ natDhcpRelease,
+ natDhcpRenew,
+ radioEngKeyed,
+ radioWatchDogLogged,
+ radioFatalErrorLogged,
+ codePointSelect,
+ prioritySelect,
+ priorityPrecedence,
+ pppoeCtlPriority,
+ rfStatXmtUDataCnt,
+ rfStatXmtBDataCnt,
+ rfStatXmtMDataCnt,
+ rfStatRcvUDataCnt,
+ rfStatRcvBDataCnt,
+ rfStatRcvMDataCnt,
+ rfStatXmtCntlCnt,
+ rfStatRcvCntlCnt,
+ rfStatInSyncCount,
+ rfStatOutSyncCount,
+ rfStatOverrunCount,
+ rfStatUnderrunCount,
+ rfStatRcvCorruptDataCount,
+ rfStatRcvCorruptControlCount,
+ rfStatBadBcastCtlCnt,
+ rfStatPLLOutOfLockCnt,
+ rfStatBeaconVerMismatchCnt,
+ rfStatBadFreqBcnRcvCnt,
+ rfStatnonLiteBcnRcvCnt,
+ rfStatUnsupFeatBcnRcvCnt,
+ rfStatUnkwnFeatBcnRcvCnt,
+ rfStatTxCalFailCnt,
+ rfStatBadInSyncIDRcv,
+ rfStatTempOutOfRange,
+ rfStatRSSIOutOfRange,
+ rfStatRangeCapEnf,
+ rfStatRcvLTStart,
+ rfStatRcvLTStartHS,
+ rfStatRcvLTResult,
+ rfStatXmtLTResult,
+ soundingStatClear,
+ soundingStatRequestCount,
+ soundingStatResponseCount,
+ soundingStatRequestsIgnored,
+ soundingStatAvgRequestInterval,
+ soundingStatMaxRequestInterval,
+ soundingStatErrorCount,
+ soundingStatRequestsDropped,
+ soundingStatResponsesSuppressed,
+ soundingStatVersionMismatch,
+ whispFeatureKeyOrigin,
+ poeT2Status,
+ updateStatus,
+ bridgeCbFecStatbin,
+ bridgeCbFecStatbout,
+ bridgeCbFecStatbtoss,
+ bridgeCbFecStatbtosscap,
+ bridgeCbFecStatuin,
+ bridgeCbFecStatuout,
+ bridgeCbFecStatutoss,
+ bridgeCbFecStatutosscap,
+ bridgeCbEthAuxStatbin,
+ bridgeCbEthAuxStatbout,
+ bridgeCbEthAuxStatbtoss,
+ bridgeCbEthAuxStatbtosscap,
+ bridgeCbEthAuxStatuin,
+ bridgeCbEthAuxStatuout,
+ bridgeCbEthAuxStatutoss,
+ bridgeCbEthAuxStatutosscap,
+ bridgeCbFecStatfloods,
+ bridgeCbEthAuxStatfloods,
+ bridgeCbRFStatfloods,
+ bridgeCbRFStatbin,
+ bridgeCbRFStatbout,
+ bridgeCbRFStatbtoss,
+ bridgeCbRFStatbtosscap,
+ bridgeCbRFStatuin,
+ bridgeCbRFStatuout,
+ bridgeCbRFStatutoss,
+ bridgeCbRFStatutosscap,
+ bridgeCbErrStatNI1QSend,
+ bridgeCbErrStatNI2QSend,
+ bridgeCbErrStatBridgeFull,
+ bridgeCbErrStatSendMsg,
+ bridgeCbErrStatAPFecQSend,
+ bridgeCbErrStatApRfQSend,
+ fecStatLinkDetected,
+ fecStatLinkUptime,
+ fecStatLinkLost,
+ fecStatUnderSizedToss,
+ fecInDiscardsCount,
+ fecInErrorsCount,
+ fecOutDiscardsCount,
+ fecOutErrorsCount,
+ fecRxBabErr,
+ fecTxHbErr,
+ fecEthBusErr,
+ fecCRCError,
+ fecRxFifoNoBuf,
+ fecRxOverrun,
+ fecLateCollision,
+ fecRetransLimitExp,
+ fecTxUnderrun,
+ fecCarSenseLost,
+ fecNoCarrier,
+ fecLargeFrame,
+ fecRuntFrame,
+ fecExcessiveDeferrals,
+ fecAuxStatLinkDetected,
+ fecAuxStatLinkUptime,
+ fecAuxStatLinkLost,
+ fecAuxInDiscardsCount,
+ fecAuxInErrorsCount,
+ fecAuxOutDiscardsCount,
+ fecAuxOutErrorsCount,
+ fecAuxCRCError,
+ fecAuxRxOverrun,
+ fecAuxLateCollision,
+ fecAuxRetransLimitExp,
+ fecAuxTxUnderrun,
+ fecAuxCarSenseLost,
+ fecAuxNoCarrier,
+ fecAuxLargeFrame,
+ fecAuxRuntFrame,
+ rfInDiscardsCountExt,
+ rfInErrorsCountExt,
+ rfOutDiscardsCountExt,
+ rfOutErrorsCountExt,
+ rfInDiscardsCount,
+ rfInErrorsCount,
+ rfOutDiscardsCount,
+ rfOutErrorsCount,
+ packetOverloadCounter,
+ fecInDiscardsOverloadCount,
+ fecOutDiscardsOverloadCount,
+ rfInDiscardsOverloadCount,
+ rfOutDiscardsOverloadCount,
+ framePeriodCurrent,
+ hardwareVersion,
+ radioStatusTransmitControlOverridden,
+ radioStatusTrackingFailure,
+ radioStatusSectorWeightsOff,
+ radioStatusRxBeamFormingOff,
+ radioStatusPowerDetectorInactive,
+ radioStatusCatQuadCalFail,
+ radioStatusAlarmReason,
+ radioStatusAlarm,
+ atexHazlocPowerLimit,
+ interleave,
+ controlMessages,
+ radioMSN,
+ simulatedAirDelay,
+ latitude,
+ longitude,
+ height,
+ bandwidth,
+ dataScramblingMethod,
+ whispWebUserAccessMode,
+ whispUsrAuth,
+ usrAccountEnableAccounting,
+ allowRejectThenLocal,
+ pppoeFilter,
+ smbFilter,
+ ipv6smbFilter,
+ snmpFilter,
+ ipv6snmpFilter,
+ userP1Filter,
+ userP2Filter,
+ userP3Filter,
+ allOtherIpFilter,
+ allOtherIpv6Filter,
+ allIpv4Filter,
+ allIpv6Filter,
+ arpFilter,
+ allOthersFilter,
+ userDefinedPort1,
+ port1TCPFilter,
+ port1UDPFilter,
+ userDefinedPort2,
+ port2TCPFilter,
+ port2UDPFilter,
+ userDefinedPort3,
+ port3TCPFilter,
+ port3UDPFilter,
+ bootpcFilter,
+ ipv6bootpcFilter,
+ bootpsFilter,
+ ipv6bootpsFilter,
+ ip4MultFilter,
+ ipv6MultFilter,
+ packetFilterDirection,
+ encryptionConfig,
+ activeTxPowerStr,
+ activeTxPowerHdths}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box Level Attributes group."
+ ::= {whispBoxGroups 1}
+
+ whispBoxControlGroup OBJECT-GROUP
+ OBJECTS {
+ enable8023linkBox,
+ saveFlash,
+ reboot,
+ clearEventLog,
+ rebootIfRequired,
+ clearBERStats,
+ updateDevice,
+ undoUnitWideSavedChanges,
+ resetPoEAux,
+ siteInfoViewable,
+ largeVCQ,
+ snrCalculation,
+ receiveQualityDebug,
+ poeT2Classification,
+ vcDepth,
+ enableSecurityBanner,
+ textSecurityBanner,
+ acceptSecurityBanner,
+ importConfigFile,
+ exportConfigFile}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box Level control group."
+ ::= {whispBoxGroups 2}
+
+ whispBoxBTGroup OBJECT-GROUP
+ OBJECTS {
+ whispBridgeMacAddr,
+ whispBridgeDesLuid,
+ whispBridgeAge,
+ whispBridgeExt,
+ whispBridgeHash,
+ whispBridgeCAM}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box Bridging Table group."
+ ::= {whispBoxGroups 3}
+
+ whispBoxVLANTableGroup OBJECT-GROUP
+ OBJECTS {
+ whispVID,
+ whispVType,
+ whispVAge}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box VLAN member Table group."
+ ::= {whispBoxGroups 4}
+
+ whispBoxCPTableGroup OBJECT-GROUP
+ OBJECTS {
+ codePoint0,
+ codePoint1,
+ codePoint2,
+ codePoint3,
+ codePoint4,
+ codePoint5,
+ codePoint6,
+ codePoint7,
+ codePoint8,
+ codePoint9,
+ codePoint10,
+ codePoint11,
+ codePoint12,
+ codePoint13,
+ codePoint14,
+ codePoint15,
+ codePoint16,
+ codePoint17,
+ codePoint18,
+ codePoint19,
+ codePoint20,
+ codePoint21,
+ codePoint22,
+ codePoint23,
+ codePoint24,
+ codePoint25,
+ codePoint26,
+ codePoint27,
+ codePoint28,
+ codePoint29,
+ codePoint30,
+ codePoint31,
+ codePoint32,
+ codePoint33,
+ codePoint34,
+ codePoint35,
+ codePoint36,
+ codePoint37,
+ codePoint38,
+ codePoint39,
+ codePoint40,
+ codePoint41,
+ codePoint42,
+ codePoint43,
+ codePoint44,
+ codePoint45,
+ codePoint46,
+ codePoint47,
+ codePoint48,
+ codePoint49,
+ codePoint50,
+ codePoint51,
+ codePoint52,
+ codePoint53,
+ codePoint54,
+ codePoint55,
+ codePoint56,
+ codePoint57,
+ codePoint58,
+ codePoint59,
+ codePoint60,
+ codePoint61,
+ codePoint62,
+ codePoint63}
+ STATUS current
+ DESCRIPTION
+ "Code Point Table group."
+ ::= {whispBoxGroups 5}
+
+ whispBoxUserTableGroup OBJECT-GROUP
+ OBJECTS {
+ entryIndex,
+ userLoginName,
+ userPswd,
+ accessLevel,
+ loginStatus,
+ loginMethod,
+ sessionTime}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box User Information Table group."
+ ::= {whispBoxGroups 6}
+
+ whispLayer2NeighborTableGroup OBJECT-GROUP
+ OBJECTS {
+ entryL2Index,
+ neighborMAC,
+ neighborIP,
+ neighborSiteName}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box Layer 2 Neighbor information."
+ ::= {whispBoxGroups 7}
+
+ whispBoxNotifGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ boxLan1DHCPClientEvent,
+ boxPoEType2PowerNotPresent,
+ radioStatusAlarmEvent}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box Notification Group."
+ ::= {whispBoxGroups 8}
+
+ whispBoxVLANRemarkTableGroup OBJECT-GROUP
+ OBJECTS {
+ sourceVID,
+ remarkVIDState,
+ remarkVID,
+ remarkPriorityState,
+ remarkPriority}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box VLAN Remarking Table group."
+ ::= {whispBoxGroups 9}
+
+ whispBoxSNMPv3Group OBJECT-GROUP
+ OBJECTS {
+ snmpv3EngineId,
+ snmpv3SecLvl,
+ snmpv3AuthProt,
+ snmpv3PrivProt,
+ roUserName,
+ roAuthPassword,
+ roPrivPassword,
+ rwUserEnable,
+ rwUserName,
+ rwAuthPassword,
+ rwPrivPassword,
+ userName1,
+ user1Enable,
+ user1AuthPassword,
+ user1PrivPassword,
+ userGroup1,
+ userName2,
+ user2Enable,
+ user2AuthPassword,
+ user2PrivPassword,
+ user2Group,
+ userName3,
+ user3Enable,
+ user3AuthPassword,
+ user3PrivPassword,
+ user3Group,
+ snmpv3TrapEnable}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box SNMPv3 Group."
+ ::= {whispBoxGroups 10}
+
+ whispBoxLinkTestGroup OBJECT-GROUP
+ OBJECTS {
+ linkTestLUIDBox,
+ linkTestDurationBox,
+ linkTestActionBox,
+ linkTestPktLengthBox,
+ linkTestModeBox,
+ linkTestSNRCalculationBox,
+ linkTestWithDualPathBox,
+ linkTestNumPktBox,
+ linkTestForceModulationBox,
+ linkTestDirectionBox,
+ testLUIDBox,
+ linkTestStatusBox,
+ linkTestErrorBox,
+ testDurationBox,
+ downLinkRateBox,
+ upLinkRateBox,
+ downLinkRateExtrapolatedBox,
+ upLinkRateExtrapolatedBox,
+ downLinkEffBox,
+ maxDwnLinkIndexBox,
+ actDwnLinkIndexBox,
+ expDwnFragCountBox,
+ actDwnFragCountBox,
+ upLinkEffBox,
+ expUpFragCountBox,
+ actUpFragCountBox,
+ maxUpLinkIndexBox,
+ actUpLinkIndexBox,
+ fragments1xDwnLinkVerticalBox,
+ fragments2xDwnLinkVerticalBox,
+ fragments3xDwnLinkVerticalBox,
+ fragments4xDwnLinkVerticalBox,
+ fragments1xUpLinkVerticalBox,
+ fragments2xUpLinkVerticalBox,
+ fragments3xUpLinkVerticalBox,
+ fragments4xUpLinkVerticalBox,
+ fragments1xDwnLinkHorizontalBox,
+ fragments2xDwnLinkHorizontalBox,
+ fragments3xDwnLinkHorizontalBox,
+ fragments4xDwnLinkHorizontalBox,
+ fragments1xUpLinkHorizontalBox,
+ fragments2xUpLinkHorizontalBox,
+ fragments3xUpLinkHorizontalBox,
+ fragments4xUpLinkHorizontalBox,
+ bitErrorsCorrected1xDwnLinkVerticalBox,
+ bitErrorsCorrected2xDwnLinkVerticalBox,
+ bitErrorsCorrected3xDwnLinkVerticalBox,
+ bitErrorsCorrected4xDwnLinkVerticalBox,
+ bitErrorsCorrected1xUpLinkVerticalBox,
+ bitErrorsCorrected2xUpLinkVerticalBox,
+ bitErrorsCorrected3xUpLinkVerticalBox,
+ bitErrorsCorrected4xUpLinkVerticalBox,
+ signalToNoiseRatioDownLinkVerticalBox,
+ signalToNoiseRatioUpLinkVerticalBox,
+ bitErrorsCorrected1xDwnLinkHorizontalBox,
+ bitErrorsCorrected2xDwnLinkHorizontalBox,
+ bitErrorsCorrected3xDwnLinkHorizontalBox,
+ bitErrorsCorrected4xDwnLinkHorizontalBox,
+ bitErrorsCorrected1xUpLinkHorizontalBox,
+ bitErrorsCorrected2xUpLinkHorizontalBox,
+ bitErrorsCorrected3xUpLinkHorizontalBox,
+ bitErrorsCorrected4xUpLinkHorizontalBox,
+ signalToNoiseRatioDownLinkHorizontalBox,
+ signalToNoiseRatioUpLinkHorizontalBox,
+ linkTestLastRunTime,
+ linkTestMissedFragDwnLink,
+ linkTestMissedFragUpLink,
+ linkTestNumPktTxActCnt,
+ linkTestNumPktTxExpCnt,
+ linkTestNumPktRxActCnt,
+ linkTestNumPktRxExpCnt,
+ linkTestMVCVC,
+ linkTestMVCPriority,
+ linkTestMVCXmtFragsDL,
+ linkTestMVCRcvFragsDL,
+ linkTestMVCThroughputDL,
+ linkTestMVCEfficiencyDL,
+ linkTestMVCSumimoModRateDL,
+ linkTestMVCSumimoXmtModeDL,
+ linkTestMVCMumimoModRateDL,
+ linkTestMVCMumimoXmtModeDL,
+ linkTestMVCGroupingRatioDL,
+ linkTestMVCXmtFragsTotalDL,
+ linkTestMVCRcvFragsTotalDL,
+ linkTestMVCThroughputTotalDL,
+ linkTestMVCThroughputTotalUntestedVCsDL,
+ linkTestMVCEfficiencyTotalDL,
+ linkTestMVCSlotDistributionDL,
+ linkTestFloodModeBox,
+ linkTestMumimoBox,
+ linkTestVCListBox,
+ linkTestSMRestriction}
+ STATUS current
+ DESCRIPTION
+ "Canopy Box Link Test group."
+ ::= {whispBoxGroups 11}
+
+ whispBridgeTbUsed OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of used entries in bridging table."
+ ::={whispBoxBridgeVar 1}
+
+ whispBridgeTbFree OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of free entries in bridging table."
+ ::={whispBoxBridgeVar 2}
+
+ whispBridgeTbErr OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Bridging table errors."
+ ::={whispBoxBridgeVar 3}
+
+ codePoint0 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Code Point 0."
+ ::={whispBoxCPVar 1}
+
+ codePoint1 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 1."
+ ::={whispBoxCPVar 2}
+
+ codePoint2 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 2."
+ ::={whispBoxCPVar 3}
+
+ codePoint3 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 3."
+ ::={whispBoxCPVar 4}
+
+ codePoint4 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 4."
+ ::={whispBoxCPVar 5}
+
+ codePoint5 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 5."
+ ::={whispBoxCPVar 6}
+
+ codePoint6 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 6."
+ ::={whispBoxCPVar 7}
+
+ codePoint7 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 7."
+ ::={whispBoxCPVar 8}
+
+ codePoint8 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 8."
+ ::={whispBoxCPVar 9}
+
+ codePoint9 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 9."
+ ::={whispBoxCPVar 10}
+
+ codePoint10 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 10."
+ ::={whispBoxCPVar 11}
+
+ codePoint11 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 11."
+ ::={whispBoxCPVar 12}
+
+ codePoint12 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 12."
+ ::={whispBoxCPVar 13}
+
+ codePoint13 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 13."
+ ::={whispBoxCPVar 14}
+
+ codePoint14 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 14."
+ ::={whispBoxCPVar 15}
+
+ codePoint15 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 15."
+ ::={whispBoxCPVar 16}
+
+ codePoint16 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 16."
+ ::={whispBoxCPVar 17}
+
+ codePoint17 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 17."
+ ::={whispBoxCPVar 18}
+
+ codePoint18 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 18."
+ ::={whispBoxCPVar 19}
+
+ codePoint19 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 19."
+ ::={whispBoxCPVar 20}
+
+ codePoint20 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 20."
+ ::={whispBoxCPVar 21}
+
+ codePoint21 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 21."
+ ::={whispBoxCPVar 22}
+
+ codePoint22 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 22."
+ ::={whispBoxCPVar 23}
+
+ codePoint23 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 23."
+ ::={whispBoxCPVar 24}
+
+ codePoint24 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 24."
+ ::={whispBoxCPVar 25}
+
+ codePoint25 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 25."
+ ::={whispBoxCPVar 26}
+
+ codePoint26 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 26."
+ ::={whispBoxCPVar 27}
+
+ codePoint27 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 27."
+ ::={whispBoxCPVar 28}
+
+ codePoint28 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 28."
+ ::={whispBoxCPVar 29}
+
+ codePoint29 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 29."
+ ::={whispBoxCPVar 30}
+
+ codePoint30 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 30."
+ ::={whispBoxCPVar 31}
+
+ codePoint31 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 31."
+ ::={whispBoxCPVar 32}
+
+ codePoint32 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 32."
+ ::={whispBoxCPVar 33}
+
+ codePoint33 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 33."
+ ::={whispBoxCPVar 34}
+
+ codePoint34 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 34."
+ ::={whispBoxCPVar 35}
+
+ codePoint35 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 35."
+ ::={whispBoxCPVar 36}
+
+ codePoint36 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 36."
+ ::={whispBoxCPVar 37}
+
+ codePoint37 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 37."
+ ::={whispBoxCPVar 38}
+
+ codePoint38 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 38."
+ ::={whispBoxCPVar 39}
+
+ codePoint39 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 39."
+ ::={whispBoxCPVar 40}
+
+ codePoint40 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 40."
+ ::={whispBoxCPVar 41}
+
+ codePoint41 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 41."
+ ::={whispBoxCPVar 42}
+
+ codePoint42 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 42."
+ ::={whispBoxCPVar 43}
+
+ codePoint43 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 43."
+ ::={whispBoxCPVar 44}
+
+ codePoint44 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 44."
+ ::={whispBoxCPVar 45}
+
+ codePoint45 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 45."
+ ::={whispBoxCPVar 46}
+
+ codePoint46 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 46."
+ ::={whispBoxCPVar 47}
+
+ codePoint47 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 47."
+ ::={whispBoxCPVar 48}
+
+ codePoint48 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Code Point 48."
+ ::={whispBoxCPVar 49}
+
+ codePoint49 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 49."
+ ::={whispBoxCPVar 50}
+
+ codePoint50 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 50."
+ ::={whispBoxCPVar 51}
+
+ codePoint51 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 51."
+ ::={whispBoxCPVar 52}
+
+ codePoint52 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 52."
+ ::={whispBoxCPVar 53}
+
+ codePoint53 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 53."
+ ::={whispBoxCPVar 54}
+
+ codePoint54 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 54."
+ ::={whispBoxCPVar 55}
+
+ codePoint55 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 55."
+ ::={whispBoxCPVar 56}
+
+ codePoint56 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Code Point 56."
+ ::={whispBoxCPVar 57}
+
+ codePoint57 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 57."
+ ::={whispBoxCPVar 58}
+
+ codePoint58 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 58."
+ ::={whispBoxCPVar 59}
+
+ codePoint59 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 59."
+ ::={whispBoxCPVar 60}
+
+ codePoint60 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 60."
+ ::={whispBoxCPVar 61}
+
+ codePoint61 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 61."
+ ::={whispBoxCPVar 62}
+
+ codePoint62 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 62."
+ ::={whispBoxCPVar 63}
+
+ codePoint63 OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Code Point 63."
+ ::={whispBoxCPVar 64}
+
+-- Lan1 DHCP Client Event on AP or SM (with NAT disabled)
+
+ boxLan1DHCPClientEvent NOTIFICATION-TYPE
+ OBJECTS {
+ dhcpLanIp,
+ whispBoxEsn}
+ STATUS current
+ DESCRIPTION
+ "Lan1 DHCP Client has received a new address via DHCP"
+ ::={whispBoxDHCPClientEvent 1}
+
+-- Transmit disabled due to PoE 802.3at Type 2 not present and not being ignored.
+
+ boxPoEType2PowerNotPresent NOTIFICATION-TYPE
+ OBJECTS {
+ whispBoxEsn}
+ STATUS current
+ DESCRIPTION
+ "802.3at Type 2 PoE not present, transmit and PoE out disabled"
+ ::={whispBoxPoEEvent 1}
+
+-- Radio Status Alarm.
+
+ radioStatusAlarmEvent NOTIFICATION-TYPE
+ OBJECTS {
+ radioStatusAlarmReason,
+ whispBoxEsn}
+ STATUS current
+ DESCRIPTION
+ "Radio Alarm Event notification."
+ ::={whispBoxRadioAlarmEvent 1}
+
+ dnsIpState OBJECT-TYPE
+ SYNTAX INTEGER {
+ manual(0),
+ automatic(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configuration for DNS server IP addresses of the management interface are learned:
+ 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP
+ 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface"
+ ::={whispBoxDNS 1}
+
+ dnsPrimaryMgmtIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Primary DNS IP address for the management interface."
+ ::={whispBoxDNS 2}
+
+ dnsAlternateMgmtIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Secondary DNS IP address for the management interface."
+ ::={whispBoxDNS 3}
+
+ dnsMgmtDomainName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Domain Name to use for management DNS configuration. This domain name may
+ be concatonated to DNS names used configured for the management interface."
+ ::={whispBoxDNS 4}
+
+ trapDomainNameAppend OBJECT-TYPE
+ SYNTAX INTEGER {
+ disableDomain(0),
+ appendDomain(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Select whether to append the configured management domain name to
+ the configured trap names. For example, if dnsMgmtDomainName is
+ set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend
+ is set to appendDomain, the trap1 name used would be 'trap1.example.com'."
+ ::={whispBoxDNS 5}
+
+ trap1 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 1.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 6}
+
+ trap2 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 2.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 7}
+
+ trap3 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 3.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 8}
+
+ trap4 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 4.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 9}
+
+ trap5 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 5.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 10}
+
+ trap6 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 6.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 11}
+
+ trap7 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 7.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 12}
+
+ trap8 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 8.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 13}
+
+ trap9 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 9.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 14}
+
+ trap10 OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Trap IP Address 10.
+ Format is either an IP address or DNS name."
+ ::={whispBoxDNS 15}
+
+ snmpv2cEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable(1) or Disable(0) SNMPv2c access"
+ ::={whispBoxSNMPv3 1}
+
+ snmpv3EngineId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (10..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMPv3 engine administratively-unique identifier. Length of the identifier should be 5-32 octets which is 10-64 hexadecimal characters and even."
+ ::={whispBoxSNMPv3 2}
+
+ snmpv3SecLvl OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAuth-noPriv(0),
+ auth-noPriv(1),
+ auth-priv(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The security level of the SNMPv3 Engine."
+ ::={whispBoxSNMPv3 3}
+
+ snmpv3AuthProt OBJECT-TYPE
+ SYNTAX INTEGER {
+ md5(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMPv3 message authentication protocol to use.
+ Currently only MD5 is supported."
+ ::={whispBoxSNMPv3 4}
+
+ snmpv3PrivProt OBJECT-TYPE
+ SYNTAX INTEGER {
+ cbc-des(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SNMPv3 message privacy/encryption protocol to use.
+ Currently only CBC-DES is supported."
+ ::={whispBoxSNMPv3 5}
+
+ roUserName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Only username."
+ ::={whispBoxSNMPv3 6}
+
+ roAuthPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Only message authentication password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 7}
+
+ roPrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Only message privacy/encryption password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 8}
+
+ rwUserEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write User Enable."
+ ::={whispBoxSNMPv3 9}
+
+ rwUserName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write Username."
+ ::={whispBoxSNMPv3 10}
+
+ rwAuthPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 11}
+
+ rwPrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 12}
+
+ snmpv3TrapEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ roUserTrapEnable(1),
+ rwUserTrapEnable(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Trap enable option:
+ (0) Disable - No SNMPv3 Traps Sent
+ (1) Enable Traps to be sent for SNMPv3 Read-Only User
+ (2) Enable Traps to be sent for SNMPv3 Read-Write User
+ NOTE: When disabled SNMPv2c Trap configuration is used."
+ ::={whispBoxSNMPv3 13}
+
+ user1Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Additional User1 Enable."
+ ::={whispBoxSNMPv3 14}
+
+ userName1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Additional SNMPv3 Username1."
+ ::={whispBoxSNMPv3 15}
+
+ user1AuthPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 16}
+
+ user1PrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 17}
+
+ userGroup1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ readwrite(1),
+ readonly(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User1 Group (ReadWrite/ReadOnly)."
+ ::={whispBoxSNMPv3 18}
+
+ userName2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Additional SNMPv3 Username2."
+ ::={whispBoxSNMPv3 19}
+
+ user2Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Additional User2 Enable."
+ ::={whispBoxSNMPv3 20}
+
+ user2AuthPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 21}
+
+ user2PrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 22}
+
+ user2Group OBJECT-TYPE
+ SYNTAX INTEGER {
+ readwrite(1),
+ readonly(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User1 Group (ReadWrite/ReadOnly)."
+ ::={whispBoxSNMPv3 23}
+
+ userName3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Additional SNMPv3 Username1."
+ ::={whispBoxSNMPv3 24}
+
+ user3Enable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Additional User3 Enable."
+ ::={whispBoxSNMPv3 25}
+
+ user3AuthPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 26}
+
+ user3PrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long."
+ ::={whispBoxSNMPv3 27}
+
+ user3Group OBJECT-TYPE
+ SYNTAX INTEGER {
+ readwrite(1),
+ readonly(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User3 Group (ReadWrite/ReadOnly)."
+ ::={whispBoxSNMPv3 28}
+
+ whispRegStatusBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "This shows the registration status of a link."
+ ::={whispBoxLink 4}
+
+-- Link test configuration
+
+ linkTestLUIDBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "LUID selection for Link Test. Valid range: 2-255. Read-Only for SM or Backhaul slave, Read/Write for AP."
+ ::={whispBoxLinkTestConfig 1}
+
+ linkTestDurationBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Duration for the Link Test. Valid range: 2-10 seconds"
+ ::={whispBoxLinkTestConfig 2}
+
+-- Link test action
+
+ linkTestActionBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ stopped(0),
+ start(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test.
+ In fact it will return an error message. The value of 0 just indicates the idle state
+ meaning no test is running or the current test is done.
+ That's why the word stopped is used and not the action verb stop."
+ ::={whispBoxLinkTestConfig 3}
+
+ linkTestPktLengthBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Packet length for Link Test. Valid range: 64-1714 bytes"
+ ::={whispBoxLinkTestConfig 4}
+
+ linkTestModeBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ linktestwithmultipleVCs(4),
+ linktestwithoutbridging(0),
+ linktestwithbridging(1),
+ linktestwithbridgingandmir(2),
+ extrapolatedlinktest(3)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Link Test Mode
+ 0 = Link Test without Bridging
+ 1 = Link Test with Bridging
+ 2 = Link Test with Bridging and MIR
+ 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput)
+ This is an estimation of the throughput based upon the modulation, efficiency, and data slots available.
+ It intended to provide a basic link test test without impacting service for the sector.
+ Extrapolated Link Test is not available for FSK radios.
+ 4 = Link Test with Multiple VCs (traffic sent to all registered VCs, or specified VCs) - PMP 450m only"
+ ::={whispBoxLinkTestConfig 5}
+
+ linkTestSNRCalculationBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test.
+ Enabling(1) will calulate SNR on all receiving packets.
+ Due to load on CPU, will slightly degrade packet per second capabilities.
+ Only applicable to GenII OFDM products and up."
+ ::={whispBoxLinkTestConfig 6}
+
+ linkTestWithDualPathBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ lowpriorityvconly(0),
+ highandlowpriorityvcs(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Link Test with:
+ 0 = Low Priority VC only
+ 1 = High and Low Priority VCs"
+ ::={whispBoxLinkTestConfig 7}
+
+-- Link test configuration
+
+ linkTestNumPktBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of packets to send. Valid range: 0-64 where 0 will
+ flood the link for the duration of the test."
+ ::={whispBoxLinkTestConfig 8}
+
+ linkTestForceModulationBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ normalRateAdapt(0),
+ forceMaxModulation(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Engineering use only.
+ Link Test with:
+ 0 = Normal Rate Adapt algorithm
+ 1 = Force to max modultion - No Rate Adapt Algorithm"
+ ::={whispBoxLinkTestConfig 9}
+
+ linkTestDirectionBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ bidirectional(0),
+ uplinkonly(1),
+ downlinkonly(2)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Link Test Direction - Engineering Use Only
+ 0 = default (will do bidirectional)
+ 1 = Uplink Only
+ 2 = Downlink Only
+ 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0)"
+ ::={whispBoxLinkTestConfig 10}
+
+ linkTestFloodModeBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ external(0),
+ internal(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "PMP 450m only. Engineering use only.
+ Link Test usage:
+ 0 = Packets will be sent out the SM ethernet port
+ 1 = Packets will not be sent out the SM ethernet port"
+ ::={whispBoxLinkTestConfig 11}
+
+ linkTestMumimoBox OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "PMP 450m only.
+ Link Test usage:
+ 0 = MU-MIMO disabled (legacy or sector mode)
+ 1 = MU-MIMO enabled"
+ ::={whispBoxLinkTestConfig 12}
+
+ linkTestVCListBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "PMP 450m only.
+ Link Test usage:
+ Enter VCs to be tested (eg. 18 - 22,24,32)
+ Empty field or 0 will flood all registered VCs for duration of test"
+ ::={whispBoxLinkTestConfig 13}
+
+ linkTestSMRestriction OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Control access to SM initiated Link Tests.
+ Disabling will permit all Link Tests initiated at the SM.
+ Enabling will only permit Link Tests that allow user traffic to pass.
+ PMP only."
+ ::={whispBoxLinkTestConfig 14}
+
+-- Link test results
+
+ testLUIDBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LUID number of selected unit."
+ ::={whispBoxLinkTestResult 1}
+
+ linkTestStatusBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status for Link Test."
+ ::={whispBoxLinkTestResult 2}
+
+ linkTestErrorBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Error status of Link Test:
+ (1) Failed to recieve handshake from remote device
+ (2) No session is currently active. Please try again after session established.
+ (3) Received a bad transaction ID. Please try again.
+ (4) We werent able to send the test request to the remote device.
+ (5) We didnt receive any results from the remote device."
+ ::={whispBoxLinkTestResult 3}
+
+ testDurationBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Duration of link test."
+ ::={whispBoxLinkTestResult 4}
+
+ downLinkRateBox OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "bps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Rate."
+ ::={whispBoxLinkTestResult 5}
+
+ upLinkRateBox OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "bps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Uplink Rate."
+ ::={whispBoxLinkTestResult 6}
+
+ downLinkEffBox OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "%"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Down Link Efficiency."
+ ::={whispBoxLinkTestResult 7}
+
+ maxDwnLinkIndexBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For link test results, the maximum possible downlink efficiency percentage (always 100%)."
+ ::={whispBoxLinkTestResult 8}
+
+ actDwnLinkIndexBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual down link index."
+ ::={whispBoxLinkTestResult 9}
+
+ expDwnFragCountBox OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Expected Fragment Count."
+ ::={whispBoxLinkTestResult 10}
+
+ actDwnFragCountBox OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Fragment Count"
+ ::={whispBoxLinkTestResult 11}
+
+ upLinkEffBox OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "%"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Up link efficiency."
+ ::={whispBoxLinkTestResult 12}
+
+ expUpFragCountBox OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Uplink expected Fragment Count."
+ ::={whispBoxLinkTestResult 13}
+
+ actUpFragCountBox OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual uplink Fragment Count."
+ ::={whispBoxLinkTestResult 14}
+
+ maxUpLinkIndexBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For link test results, the maximum possible uplink efficiency percentage (always 100%)."
+ ::={whispBoxLinkTestResult 15}
+
+ actUpLinkIndexBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Actual Up link index."
+ ::={whispBoxLinkTestResult 16}
+
+ fragments1xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 1X (QPSK).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 17}
+
+ fragments2xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 2X (16-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 18}
+
+ fragments3xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 3X (64-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 19}
+
+ fragments4xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 4X (256-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 20}
+
+ fragments1xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 1X (QPSK).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 21}
+
+ fragments2xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 2X (16-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 22}
+
+ fragments3xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 3X (64-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 23}
+
+ fragments4xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 4X (256-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 24}
+
+ bitErrorsCorrected1xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 1X (QPSK).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 25}
+
+ bitErrorsCorrected2xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 26}
+
+ bitErrorsCorrected3xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 27}
+
+ bitErrorsCorrected4xDwnLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 28}
+
+ bitErrorsCorrected1xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 1X (QPSK).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 29}
+
+ bitErrorsCorrected2xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 30}
+
+ bitErrorsCorrected3xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 3X (64-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 31}
+
+ bitErrorsCorrected4xUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM).
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 32}
+
+ signalToNoiseRatioDownLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Estimated Signal to Noise Ratio in dB for the down link.
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 33}
+
+ signalToNoiseRatioUpLinkVerticalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Estimated Signal to Noise Ratio in dB for the up link.
+ For Gen II OFDM and forward.
+ For MIMO this is the vertical path."
+ ::={whispBoxLinkTestResult 34}
+
+ fragments1xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 1X (QPSK).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 35}
+
+ fragments2xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 2X (16-QAM).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 36}
+
+ fragments3xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 3X (64-QAM).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 37}
+
+ fragments4xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on down link at 4X (256-QAM).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 38}
+
+ fragments1xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 1X (QPSK).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 39}
+
+ fragments2xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 2X (16-QAM).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 40}
+
+ fragments3xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 3X (64-QAM).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 41}
+
+ fragments4xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of fragments received on up link at 4X (256-QAM).
+ For MIMO only.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 42}
+
+ bitErrorsCorrected1xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 1X (QPSK).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 43}
+
+ bitErrorsCorrected2xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 44}
+
+ bitErrorsCorrected3xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 45}
+
+ bitErrorsCorrected4xDwnLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 46}
+
+ bitErrorsCorrected1xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 1X (QPSK).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 47}
+
+ bitErrorsCorrected2xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 48}
+
+ bitErrorsCorrected3xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Engineering use only.
+ Number of bit errors corrected on average per fragment on up link at 3X (64-QAM).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 49}
+
+ bitErrorsCorrected4xUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM).
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ Fragments received in MIMO-A will only be counted on vertical."
+ ::={whispBoxLinkTestResult 50}
+
+ signalToNoiseRatioDownLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Estimated Signal to Noise Ratio in dB for the down link.
+ For MIMO and forward.
+ For MIMO this is the horizontal path.
+ If operating in MIMO-A this will return 0."
+ ::={whispBoxLinkTestResult 51}
+
+ signalToNoiseRatioUpLinkHorizontalBox OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Estimated Signal to Noise Ratio in dB for the up link.
+ For Gen II OFDM and forward.
+ For MIMO this is the horizontal path.
+ If operating in MIMO-A this will return 0."
+ ::={whispBoxLinkTestResult 52}
+
+ downLinkRateExtrapolatedBox OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "bps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extrapolated Downlink Rate from an extrapolated link test.
+ Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test.
+ This is an estimation of the throughput based upon the modulation, efficiency, and data slots available.
+ It intended to provide a basic link test test without impacting service for the sector."
+ ::={whispBoxLinkTestResult 53}
+
+ upLinkRateExtrapolatedBox OBJECT-TYPE
+ SYNTAX INTEGER
+ UNITS "bps"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extrapolated Uplink Rate from an extrapolated link test.
+ Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test.
+ This is an estimation of the throughput based upon the modulation, efficiency, and data slots available.
+ It intended to provide a basic link test test without impacting service for the sector."
+ ::={whispBoxLinkTestResult 54}
+
+ linkTestLastRunTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time and Date when last link test ran."
+ ::={whispBoxLinkTestResult 55}
+
+ linkTestMissedFragDwnLink OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of missed fragments during link test in the downlink.
+ Only supported on 450 and 450i."
+ ::={whispBoxLinkTestResult 56}
+
+ linkTestMissedFragUpLink OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of missed fragments during link test in the uplink.
+ Only supported on 450 and 450i."
+ ::={whispBoxLinkTestResult 57}
+
+ linkTestNumPktTxActCnt OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of actual packets transmitted during link test."
+ ::={whispBoxLinkTestResult 58}
+
+ linkTestNumPktTxExpCnt OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of expected packets to be transmitted during link test."
+ ::={whispBoxLinkTestResult 59}
+
+ linkTestNumPktRxActCnt OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of actual packets received during link test."
+ ::={whispBoxLinkTestResult 60}
+
+ linkTestNumPktRxExpCnt OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of packets expected to be received during link test."
+ ::={whispBoxLinkTestResult 61}
+
+ linkTestMVCXmtFragsTotalDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Downlink Fragments Transmitted"
+ ::={whispBoxLinkTestMVCResult 1}
+
+ linkTestMVCRcvFragsTotalDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Downlink Fragments Received"
+ ::={whispBoxLinkTestMVCResult 2}
+
+ linkTestMVCThroughputTotalDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Downlink Throughput for Tested VCs"
+ ::={whispBoxLinkTestMVCResult 3}
+
+ linkTestMVCThroughputTotalUntestedVCsDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Downlink Throughput for Untested VCs.
+ This is the amount of user traffic that was transmitted to VCs during the test that were not part of the Link Test."
+ ::={whispBoxLinkTestMVCResult 4}
+
+ linkTestMVCEfficiencyTotalDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Downlink Efficiency"
+ ::={whispBoxLinkTestMVCResult 5}
+
+ linkTestMVCSlotDistributionDL OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Slot Distribution.
+ Average group size per slot per frame represented as a percentage.
+ 450m only."
+ ::={whispBoxLinkTestMVCResult 6}
+
+ whispBoxLinkTestMVCTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispBoxLinkTestMVCEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Link Test with Multiple VC results."
+ ::= {whispBoxLink 6}
+
+ whispBoxLinkTestMVCEntry OBJECT-TYPE
+ SYNTAX WhispBoxLinkTestMVCEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Link Test with Multiple VC results."
+ INDEX {linkTestMVCVC}
+ ::= {whispBoxLinkTestMVCTable 1}
+
+ WhispBoxLinkTestMVCEntry ::= SEQUENCE{
+ linkTestMVCVC INTEGER,
+ linkTestMVCPriority INTEGER,
+ linkTestMVCXmtFragsDL INTEGER,
+ linkTestMVCRcvFragsDL INTEGER,
+ linkTestMVCThroughputDL INTEGER,
+ linkTestMVCEfficiencyDL INTEGER,
+ linkTestMVCSumimoModRateDL INTEGER,
+ linkTestMVCSumimoXmtModeDL INTEGER,
+ linkTestMVCMumimoModRateDL INTEGER,
+ linkTestMVCMumimoXmtModeDL INTEGER,
+ linkTestMVCGroupingRatioDL INTEGER
+ }
+
+ linkTestMVCVC OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VC"
+ ::={whispBoxLinkTestMVCEntry 1}
+
+ linkTestMVCPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(0),
+ high(1)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VC Priority"
+ ::={whispBoxLinkTestMVCEntry 2}
+
+ linkTestMVCXmtFragsDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Fragments Transmitted"
+ ::={whispBoxLinkTestMVCEntry 3}
+
+ linkTestMVCRcvFragsDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Fragments Received"
+ ::={whispBoxLinkTestMVCEntry 4}
+
+ linkTestMVCThroughputDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Throughput"
+ ::={whispBoxLinkTestMVCEntry 5}
+
+ linkTestMVCEfficiencyDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Efficiency"
+ ::={whispBoxLinkTestMVCEntry 6}
+
+ linkTestMVCSumimoModRateDL OBJECT-TYPE
+ SYNTAX INTEGER {
+ noSession(0),
+ rate1X(1),
+ rate2X(2),
+ rete3X(3),
+ rate4X(4),
+ rate6X(6),
+ rate8X(8)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink SU-MIMO Modulation Transmit Rate.
+ 0 : No session
+ 1 : 1X QPSK MIMO-A
+ 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B
+ 3 : 3X 64-QAM MIMO-A
+ 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B
+ 6 : 6X 64-QAM MIMO-B
+ 8 : 8X 256-QAM MIMO-B"
+ ::={whispBoxLinkTestMVCEntry 7}
+
+ linkTestMVCSumimoXmtModeDL OBJECT-TYPE
+ SYNTAX INTEGER {
+ mimo-b(0),
+ mimo-a(1),
+ noSession(2)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink SU-MIMO Transmit Mode.
+ 0 : MIMO-B
+ 1 : MIMO-A
+ 2 : No session"
+ ::={whispBoxLinkTestMVCEntry 8}
+
+ linkTestMVCMumimoModRateDL OBJECT-TYPE
+ SYNTAX INTEGER {
+ invalid(0),
+ rate1X(1),
+ rate2X(2),
+ rete3X(3),
+ rate4X(4),
+ rate6X(6),
+ rate8X(8)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink MU-MIMO Modulation Transmit Rate.
+ 450m only.
+ 0 : Invalid
+ 1 : 1X QPSK MIMO-A
+ 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B
+ 3 : 3X 64-QAM MIMO-A
+ 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B
+ 6 : 6X 64-QAM MIMO-B
+ 8 : 8X 256-QAM MIMO-B"
+ ::={whispBoxLinkTestMVCEntry 9}
+
+ linkTestMVCMumimoXmtModeDL OBJECT-TYPE
+ SYNTAX INTEGER {
+ mimo-b(0),
+ mimo-a(1),
+ invalid(2)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink MU-MIMO Transmit Mode.
+ 450m only.
+ 0 : MIMO-B
+ 1 : MIMO-A
+ 2 : Invalid"
+ ::={whispBoxLinkTestMVCEntry 10}
+
+ linkTestMVCGroupingRatioDL OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Downlink Grouping Ratio.
+ The percentage of time that a VC is grouped with other VCs to make a MU-MIMO group.
+ 450m only."
+ ::={whispBoxLinkTestMVCEntry 11}
+
+ certTableUserAuth OBJECT-TYPE
+ SYNTAX SEQUENCE OF CertEntryUserAuth
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of CA Certificates for User Auth on radio."
+ ::= {whispUserAuthSecurity 1}
+
+ certEntryUserAuth OBJECT-TYPE
+ SYNTAX CertEntryUserAuth
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry of Certifcates."
+ INDEX {certIdx}
+ ::= {certTableUserAuth 1}
+
+ CertEntryUserAuth ::= SEQUENCE{
+ certIdx INTEGER,
+ certStatus INTEGER,
+ certAction INTEGER,
+ certDN DisplayString
+ }
+
+ certIdx OBJECT-TYPE
+ SYNTAX INTEGER (3..4)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User information table index."
+ ::={certEntryUserAuth 1}
+
+ certStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(0),
+ active(1)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "0: Inactive 1: Active"
+ ::={certEntryUserAuth 2}
+
+ certAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ noop(0),
+ delete(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "0: No Operation 1: Delete Certificate"
+ ::={certEntryUserAuth 3}
+
+ certDN OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Distinguished Name of Certificate"
+ ::={certEntryUserAuth 4}
+
+ whispBoxRFPhysicalRadios OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Radio information table."
+ ::= {whispBoxRFPhysical 1}
+
+ whispBoxRFPhysicalRadioEntry OBJECT-TYPE
+ SYNTAX WhispBoxRFPhysicalRadioEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Radio information table entry."
+ INDEX {radioIndex}
+ ::= {whispBoxRFPhysicalRadios 1}
+
+ WhispBoxRFPhysicalRadioEntry ::= SEQUENCE{
+ radioIndex INTEGER,
+ radioType INTEGER,
+ radioPaths INTEGER
+ }
+
+ radioIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Radio Index."
+ ::={whispBoxRFPhysicalRadioEntry 1}
+
+ radioType OBJECT-TYPE
+ SYNTAX INTEGER {
+ fsk(0),
+ ofdm(1)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates if the radio is FSK or OFDM."
+ ::={whispBoxRFPhysicalRadioEntry 2}
+
+ radioPaths OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1.
+ For MIMO, it can be greater (with a current maximum of 2)."
+ ::={whispBoxRFPhysicalRadioEntry 3}
+
+ whispBoxRFPhysicalRadioPaths OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioPathEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Radio path information table."
+ ::= {whispBoxRFPhysical 2}
+
+ whispBoxRFPhysicalRadioPathEntry OBJECT-TYPE
+ SYNTAX WhispBoxRFPhysicalRadioPathEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Radio path table entry."
+ INDEX {radioIndex,pathIndex}
+ ::= {whispBoxRFPhysicalRadioPaths 1}
+
+ WhispBoxRFPhysicalRadioPathEntry ::= SEQUENCE{
+ pathIndex INTEGER
+ }
+
+ pathIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Path Index."
+ ::={whispBoxRFPhysicalRadioPathEntry 1}
+
+ whispBoxRFPhysicalRadioFrequencies OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioFrequencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Available frequency information table."
+ ::= {whispBoxRFPhysical 3}
+
+ whispBoxRFPhysicalRadioFrequencyEntry OBJECT-TYPE
+ SYNTAX WhispBoxRFPhysicalRadioFrequencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Available frequency table entry."
+ INDEX {radioIndex,frequency}
+ ::= {whispBoxRFPhysicalRadioFrequencies 1}
+
+ WhispBoxRFPhysicalRadioFrequencyEntry ::= SEQUENCE{
+ frequency INTEGER
+ }
+
+ frequency OBJECT-TYPE
+ SYNTAX INTEGER (0..9000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frequency."
+ ::={whispBoxRFPhysicalRadioFrequencyEntry 1}
+
+ whispBoxRFConfigRadios OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispBoxRFConfigRadioEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Radio configuration table."
+ ::= {whispBoxRFConfig 1}
+
+ whispBoxRFConfigRadioEntry OBJECT-TYPE
+ SYNTAX WhispBoxRFConfigRadioEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Radio config table entry."
+ INDEX {radioConfigIndex}
+ ::= {whispBoxRFConfigRadios 1}
+
+ WhispBoxRFConfigRadioEntry ::= SEQUENCE{
+ radioConfigIndex INTEGER,
+ radioFrequencyBand INTEGER
+ }
+
+ radioConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Radio Config Index."
+ ::={whispBoxRFConfigRadioEntry 1}
+
+ radioFrequencyBand OBJECT-TYPE
+ SYNTAX INTEGER {
+ band700(0),
+ band900(1),
+ band2400(2),
+ band3500(3),
+ band3700(4),
+ band4900(5),
+ band5100(6),
+ band5200(7),
+ band5400(8),
+ band5700(9),
+ band5800(10),
+ band5900(11),
+ band6050(12),
+ band3600(13),
+ band4959(14),
+ band3(15)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Currently configured radio band.
+ Set is Engineering use only."
+ ::={whispBoxRFConfigRadioEntry 2}
+
+ whispBoxBridgeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispBoxBridgeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Bridge table."
+ ::= {whispBox 4}
+
+ whispBoxBridgeEntry OBJECT-TYPE
+ SYNTAX WhispBoxBridgeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Bridge entry."
+ INDEX {whispBridgeMacAddr}
+ ::= {whispBoxBridgeTable 1}
+
+ WhispBoxBridgeEntry ::= SEQUENCE{
+ whispBridgeMacAddr MacAddress,
+ whispBridgeDesLuid WhispLUID,
+ whispBridgeAge INTEGER,
+ whispBridgeExt INTEGER,
+ whispBridgeHash INTEGER,
+ whispBridgeCAM INTEGER
+ }
+
+ whispBridgeMacAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "MAC Address of the registered entity."
+ ::={whispBoxBridgeEntry 1}
+
+ whispBridgeDesLuid OBJECT-TYPE
+ SYNTAX WhispLUID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the Local Unit Identifier assigned to
+ Subscriber Modems."
+ ::={whispBoxBridgeEntry 2}
+
+ whispBridgeAge OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Table entry last access age in minutes."
+ ::={whispBoxBridgeEntry 3}
+
+ whispBridgeExt OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Timeout extension flag for entries which also
+ reside in the PNA APR cache."
+ ::={whispBoxBridgeEntry 4}
+
+ whispBridgeHash OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hash table array index."
+ ::={whispBoxBridgeEntry 5}
+
+ whispBridgeCAM OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "This entry is deprecated."
+ ::={whispBoxBridgeEntry 6}
+
+ whispVLANTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispVLANEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "VLAN member table."
+ ::= {whispBox 8}
+
+ whispVLANEntry OBJECT-TYPE
+ SYNTAX WhispVLANEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "VLAN entry."
+ INDEX {whispVID}
+ ::= {whispVLANTable 1}
+
+ WhispVLANEntry ::= SEQUENCE{
+ whispVID INTEGER,
+ whispVType DisplayString,
+ whispVAge INTEGER
+ }
+
+ whispVID OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VLAN member ID."
+ ::={whispVLANEntry 1}
+
+ whispVType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VLAN member type."
+ ::={whispVLANEntry 2}
+
+ whispVAge OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VLAN member age."
+ ::={whispVLANEntry 3}
+
+ whispVLANRemarkTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispVLANRemarkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Active VLAN Remarking table."
+ ::= {whispBox 17}
+
+ whispVLANRemarkEntry OBJECT-TYPE
+ SYNTAX WhispVLANRemarkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Remarking VLAN entry."
+ INDEX {sourceVID}
+ ::= {whispVLANRemarkTable 1}
+
+ WhispVLANRemarkEntry ::= SEQUENCE{
+ sourceVID INTEGER,
+ remarkVIDState DisplayString,
+ remarkVID INTEGER,
+ remarkPriorityState DisplayString,
+ remarkPriority INTEGER
+ }
+
+ sourceVID OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Source VLAN ID."
+ ::={whispVLANRemarkEntry 1}
+
+ remarkVIDState OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remark VID State."
+ ::={whispVLANRemarkEntry 2}
+
+ remarkVID OBJECT-TYPE
+ SYNTAX INTEGER (0..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remark VID."
+ ::={whispVLANRemarkEntry 3}
+
+ remarkPriorityState OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remark Priority State."
+ ::={whispVLANRemarkEntry 4}
+
+ remarkPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..7)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remark Priority."
+ ::={whispVLANRemarkEntry 5}
+
+ whispUserTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispUserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User information table."
+ ::= {whispBox 10}
+
+ whispUserEntry OBJECT-TYPE
+ SYNTAX WhispUserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User entry."
+ INDEX {entryIndex}
+ ::= {whispUserTable 1}
+
+ WhispUserEntry ::= SEQUENCE{
+ entryIndex INTEGER,
+ userLoginName DisplayString,
+ userPswd DisplayString,
+ accessLevel INTEGER,
+ loginStatus INTEGER,
+ loginMethod INTEGER,
+ sessionTime INTEGER
+ }
+
+ entryIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..5)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User information table index."
+ ::={whispUserEntry 1}
+
+ userLoginName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User name."
+ ::={whispUserEntry 2}
+
+ userPswd OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User password."
+ ::={whispUserEntry 3}
+
+ accessLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User access level."
+ ::={whispUserEntry 4}
+
+ loginStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User current status."
+ ::={whispUserEntry 5}
+
+ loginMethod OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "User login method."
+ ::={whispUserEntry 6}
+
+ sessionTime OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Users logged in session time."
+ ::={whispUserEntry 7}
+
+ whispLayer2NeighborTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WhispLayer2NeighborEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table."
+ ::= {whispBox 11}
+
+ whispLayer2NeighborEntry OBJECT-TYPE
+ SYNTAX WhispLayer2NeighborEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Neighbor Entry."
+ INDEX {entryL2Index}
+ ::= {whispLayer2NeighborTable 1}
+
+ WhispLayer2NeighborEntry ::= SEQUENCE{
+ entryL2Index INTEGER,
+ neighborMAC DisplayString,
+ neighborIP DisplayString,
+ neighborSiteName DisplayString
+ }
+
+ entryL2Index OBJECT-TYPE
+ SYNTAX INTEGER (1..20)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Neighbor information table index."
+ ::={whispLayer2NeighborEntry 1}
+
+ neighborMAC OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Neighbor MAC."
+ ::={whispLayer2NeighborEntry 2}
+
+ neighborIP OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Neighbor IP."
+ ::={whispLayer2NeighborEntry 3}
+
+ neighborSiteName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Neighbor Site Name."
+ ::={whispLayer2NeighborEntry 4}
+
+
+END
|