From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cambium/WHISP-BOX-MIBV2-MIB | 7815 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 7815 insertions(+) create mode 100644 MIBS/cambium/WHISP-BOX-MIBV2-MIB (limited to 'MIBS/cambium/WHISP-BOX-MIBV2-MIB') diff --git a/MIBS/cambium/WHISP-BOX-MIBV2-MIB b/MIBS/cambium/WHISP-BOX-MIBV2-MIB new file mode 100644 index 0000000..bb86164 --- /dev/null +++ b/MIBS/cambium/WHISP-BOX-MIBV2-MIB @@ -0,0 +1,7815 @@ + +-- +-- whisp-box-mib.mib +-- GENERATED FROM ui_db.xml +-- +-- **************************************************************************************************** +-- Copyright 2005 - 2015 (c), Cambium Networks +-- Cambium Networks Confidential Proprietary +-- **************************************************************************************************** +-- +-- Canopy Box Level(AP,SM and Backhaul) MIB definitions. +-- +-- *************************************************************************************************** + +WHISP-BOX-MIBV2-MIB DEFINITIONS ::= BEGIN +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, Unsigned32 + FROM SNMPv2-SMI + DisplayString, MacAddress + FROM SNMPv2-TC + OBJECT-GROUP + FROM SNMPv2-CONF + WhispLUID, WhispMACAddress, EventString + FROM WHISP-TCV2-MIB + whispModules, whispBox + FROM WHISP-GLOBAL-REG-MIB + ; + +whispBoxLevelMibModule MODULE-IDENTITY + LAST-UPDATED "200304150000Z" + ORGANIZATION "Cambium Networks" + CONTACT-INFO + "Cambium Networks Support + email: support@cambiumnetworks.com" + DESCRIPTION + "This module contains generic Box-Level MIB definitions for Canopy Radios." + ::= {whispModules 8} + +-- ------------------------------------------------------------------------- +-- Top Level Registrations + +whispBoxStatus OBJECT IDENTIFIER ::= {whispBox 1} +whispBoxConfig OBJECT IDENTIFIER ::= {whispBox 2} +whispBoxControls OBJECT IDENTIFIER ::= {whispBox 3} +whispBoxEventLog OBJECT IDENTIFIER ::= {whispBox 5} +whispBoxConf OBJECT IDENTIFIER ::= {whispBox 6} +whispBoxGroups OBJECT IDENTIFIER ::= {whispBoxConf 1} +whispBoxBridgeVar OBJECT IDENTIFIER ::= {whispBox 7} +whispBoxCPVar OBJECT IDENTIFIER ::= {whispBox 9} +whispBoxEvent OBJECT IDENTIFIER ::= {whispBox 12} +whispBoxDHCPClientEvent OBJECT IDENTIFIER ::= {whispBoxEvent 1} +whispBoxPoEEvent OBJECT IDENTIFIER ::= {whispBoxEvent 2} +whispBoxRadioAlarmEvent OBJECT IDENTIFIER ::= {whispBoxEvent 3} +whispBoxDNS OBJECT IDENTIFIER ::= {whispBox 13} +whispBoxSNMPv3 OBJECT IDENTIFIER ::= {whispBox 14} +whispBoxLink OBJECT IDENTIFIER ::= {whispBox 18} +whispBoxLinkTestConfig OBJECT IDENTIFIER ::= {whispBoxLink 1} +whispBoxLinkTestResult OBJECT IDENTIFIER ::= {whispBoxLink 2} +whispBoxLinkTestMVCResult OBJECT IDENTIFIER ::= {whispBoxLink 5} +whispUserAuthSecurity OBJECT IDENTIFIER ::= {whispBox 19} +whispBoxRFPhysical OBJECT IDENTIFIER ::= {whispBox 15} +whispBoxRFConfig OBJECT IDENTIFIER ::= {whispBox 16} + +-- ------------------------------------------------------------------------- + + +-- Canopy radio status page + + whispBoxSoftwareVer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Version of software. Should be noted in the event customer has + technical difficulties and need to contact technical support." + ::={whispBoxStatus 1} + + whispBoxFPGAVer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Version of FPGA." + ::={whispBoxStatus 2} + + whispBoxEsn OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Electronic serial number(MAC address) assigned to Radio." + ::={whispBoxStatus 3} + + whispBoxBoot OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Software boot version." + ::={whispBoxStatus 4} + + boxTemperature OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "Radio temperature." + ::={whispBoxStatus 5} + + boxDeviceType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the device." + ::={whispBoxStatus 6} + + boxDeviceTypeID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Device type ID." + ::={whispBoxStatus 7} + + boxEncryption OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Device encryption type. Note: Returns DES also when encryption is set to None on AP." + ::={whispBoxStatus 8} + + etherLinkStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet link status." + ::={whispBoxStatus 9} + + boxFrequency OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Frequency band of the device." + ::={whispBoxStatus 10} + + platformVer OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Hardware platform version. For internal use." + ::={whispBoxStatus 11} + + platformType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage, + Advantage, Russian, Russian - Advantage." + ::={whispBoxStatus 12} + + dhcpLanIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "LAN interface IP obtained through DHCP." + ::={whispBoxStatus 13} + + dhcpLanSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "LAN interface Subnet Mask obtained through DHCP." + ::={whispBoxStatus 14} + + dhcpLanGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "LAN interface Gateway obtained through DHCP." + ::={whispBoxStatus 15} + + dhcpRfPublicIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Public interface IP obtained through DHCP." + ::={whispBoxStatus 16} + + dhcpRfPublicSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Public interface Subnet Mask obtained through DHCP." + ::={whispBoxStatus 17} + + dhcpRfPublicGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Public interface Gateway obtained through DHCP." + ::={whispBoxStatus 18} + + lanDhcpStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display LAN interface current DHPC status." + ::={whispBoxStatus 19} + + rfPublicDhcpStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display RF Public interface current DHPC status." + ::={whispBoxStatus 20} + + inSyncCount OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for number of In Synchronization." + ::={whispBoxStatus 21} + + outSyncCount OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for number of Out of Synchronization." + ::={whispBoxStatus 22} + + pllOutLockCount OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for number of PLL out of Lock." + ::={whispBoxStatus 23} + + txCalFailure OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for number of TX Calibration failure." + ::={whispBoxStatus 24} + + swVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Software version information." + ::={whispBoxStatus 25} + + pldVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PLD version information." + ::={whispBoxStatus 26} + + platformInfo OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Platform information." + ::={whispBoxStatus 27} + + antPolarization OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Antenna polarization for FSK radios." + ::={whispBoxStatus 28} + + packetOverloadCounter OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total packet overload count." + ::={whispBoxStatus 29} + + whispBoxP11Personality OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Board Personality Configuration" + ::={whispBoxStatus 30} + + whispBoxP11FPGAType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "FPGA Type" + ::={whispBoxStatus 31} + + whispBoxP11BstrapFPGAVer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "P11 Bootstrap FPGA Version." + ::={whispBoxStatus 32} + + numDFSDetections OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of DFS Detections since last boot." + ::={whispBoxStatus 33} + + rxOverrunPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Counter for number of received overrun packets error." + ::={whispBoxStatus 34} + + boxTemperatureC OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio temperature in Celsius." + ::={whispBoxStatus 35} + + boxTemperatureF OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio temperature in Fahrenheit." + ::={whispBoxStatus 36} + + bridgeCbFecStatbin OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats bin" + ::={whispBoxStatus 37} + + bridgeCbFecStatbout OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats bout" + ::={whispBoxStatus 38} + + bridgeCbFecStatbtoss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats btoss" + ::={whispBoxStatus 39} + + bridgeCbFecStatbtosscap OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats btosscap" + ::={whispBoxStatus 40} + + bridgeCbFecStatuin OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats uin" + ::={whispBoxStatus 41} + + bridgeCbFecStatuout OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats uout" + ::={whispBoxStatus 42} + + bridgeCbFecStatutoss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats utoss" + ::={whispBoxStatus 43} + + bridgeCbFecStatutosscap OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats utosscap" + ::={whispBoxStatus 44} + + bridgeCbRFStatbin OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats bin" + ::={whispBoxStatus 45} + + bridgeCbRFStatbout OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats bout" + ::={whispBoxStatus 46} + + bridgeCbRFStatbtoss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats btoss" + ::={whispBoxStatus 47} + + bridgeCbRFStatbtosscap OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats btosscap" + ::={whispBoxStatus 48} + + bridgeCbRFStatuin OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats uin" + ::={whispBoxStatus 49} + + bridgeCbRFStatuout OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats uout" + ::={whispBoxStatus 50} + + bridgeCbRFStatutoss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats utoss" + ::={whispBoxStatus 51} + + bridgeCbRFStatutosscap OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats utosscap" + ::={whispBoxStatus 52} + + bridgeCbErrStatNI1QSend OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Error Stats ErrNI1QSend" + ::={whispBoxStatus 53} + + bridgeCbErrStatNI2QSend OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Error Stats ErrNI2QSend" + ::={whispBoxStatus 54} + + bridgeCbErrStatBridgeFull OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Error Stats BridgeFull" + ::={whispBoxStatus 55} + + bridgeCbErrStatSendMsg OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Error Stats SendMsg" + ::={whispBoxStatus 56} + + bridgeCbErrStatAPFecQSend OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Error Stats APFecQSend" + ::={whispBoxStatus 57} + + bridgeCbErrStatApRfQSend OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Error Stats ApRfQSend" + ::={whispBoxStatus 58} + + rfStatXmtUDataCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Transmit Unicast Data Count" + ::={whispBoxStatus 59} + + rfStatXmtBDataCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Transmit Broadcast Data Count" + ::={whispBoxStatus 60} + + rfStatRcvUDataCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Receive Unicast Data Count" + ::={whispBoxStatus 61} + + rfStatRcvBDataCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Receive Broadcast Data Count" + ::={whispBoxStatus 62} + + rfStatXmtCntlCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Transmit Control Count" + ::={whispBoxStatus 63} + + rfStatRcvCntlCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Receive Control Count" + ::={whispBoxStatus 64} + + rfStatInSyncCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats In Sync Count" + ::={whispBoxStatus 65} + + rfStatOutSyncCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Out Sync Count" + ::={whispBoxStatus 66} + + rfStatOverrunCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Overrun Count" + ::={whispBoxStatus 67} + + rfStatUnderrunCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Underrun Count" + ::={whispBoxStatus 68} + + rfStatRcvCorruptDataCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Receive Corrupt Data Count" + ::={whispBoxStatus 69} + + rfStatBadBcastCtlCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Bad Broadcast Control Count" + ::={whispBoxStatus 70} + + rfStatPLLOutOfLockCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats PLL Out of Lock Count" + ::={whispBoxStatus 71} + + rfStatBeaconVerMismatchCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Beacon version Mismatch Count" + ::={whispBoxStatus 72} + + rfStatBadFreqBcnRcvCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Wrong Frequency Beacon Received Count" + ::={whispBoxStatus 73} + + rfStatnonLiteBcnRcvCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Non Lite Beacon Received Count" + ::={whispBoxStatus 74} + + rfStatUnsupFeatBcnRcvCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Unsupported Feature Beacon Received Count" + ::={whispBoxStatus 75} + + rfStatUnkwnFeatBcnRcvCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Unknown Feature Beacon Received Count" + ::={whispBoxStatus 76} + + rfStatTxCalFailCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats TX Calibration Failures Count" + ::={whispBoxStatus 77} + + rfStatBadInSyncIDRcv OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Bad In Sync ID Received Count" + ::={whispBoxStatus 78} + + rfStatTempOutOfRange OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Temperature Out of Range Count" + ::={whispBoxStatus 79} + + rfStatRSSIOutOfRange OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats RSSI Out of Range Count" + ::={whispBoxStatus 80} + + rfStatRangeCapEnf OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Range Cap Enforced Count" + ::={whispBoxStatus 81} + + rfStatRcvLTStart OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Rcv LT Start Count" + ::={whispBoxStatus 82} + + rfStatRcvLTStartHS OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Rcv LT Start HS Count" + ::={whispBoxStatus 83} + + rfStatRcvLTResult OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Rcv LT Result Count" + ::={whispBoxStatus 84} + + rfStatXmtLTResult OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Xmt LT Result Count" + ::={whispBoxStatus 85} + + whispFeatureKeyOrigin OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)" + ::={whispBoxStatus 86} + + radioMSN OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MSN of the radio." + ::={whispBoxStatus 87} + + updateStatus OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Status of Device Update" + ::={whispBoxStatus 88} + + syslogStatTxSuccesses OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The count of Syslog messages sent to UDP layer." + ::={whispBoxStatus 89} + + syslogStatDropped OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of dropped syslog messages due to device overload and/or resource limitations." + ::={whispBoxStatus 90} + + fecStatLinkLost OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet link lost count" + ::={whispBoxStatus 91} + + fecStatLinkDetected OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet link detected count" + ::={whispBoxStatus 92} + + natDhcpStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display NAT Public interface current DHPC status." + ::={whispBoxStatus 93} + + fecInDiscardsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet in discards count." + ::={whispBoxStatus 94} + + fecInErrorsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet in errors count." + ::={whispBoxStatus 95} + + fecOutDiscardsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet out discards count." + ::={whispBoxStatus 96} + + fecOutErrorsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet out errors count." + ::={whispBoxStatus 97} + + rfInDiscardsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "RF in discards count. This attribute is deprecated. Use rfInDiscardsCountExt instead." + ::={whispBoxStatus 98} + + rfInErrorsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "RF in errors count. This attribute is deprecated. Use rfInErrorsCountExt instead." + ::={whispBoxStatus 99} + + rfOutDiscardsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "RF out discards count. This attribute is deprecated. Use rfOutDiscardsCountExt instead." + ::={whispBoxStatus 100} + + rfOutErrorsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "RF out errors count. This attribute is deprecated. Use rfOutErrorsCountExt instead." + ::={whispBoxStatus 101} + + fecInDiscardsOverloadCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet in discards overload." + ::={whispBoxStatus 102} + + fecOutDiscardsOverloadCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet out discards overload." + ::={whispBoxStatus 103} + + rfInDiscardsOverloadCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rf in discards overload." + ::={whispBoxStatus 104} + + rfOutDiscardsOverloadCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rf out discards overload." + ::={whispBoxStatus 105} + + fpgaCompileInfo OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the fpga compiled attributes. (Engineering Only)" + ::={whispBoxStatus 106} + + fpgaBuildDate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the entire fpga build date string. (Engineering Only)" + ::={whispBoxStatus 107} + + aggregateBandwidthCap OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum aggregate (uplink + downlink) the radio is capable of." + ::={whispBoxStatus 108} + + calibrationStatusBool OBJECT-TYPE + SYNTAX INTEGER { + notCalibrated(0), + calibrated(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Boolean OID to show if device is calibrated. + Applicable to FSK and MIMO radios only." + ::={whispBoxStatus 109} + + calibrationStatusBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "String to show if radio is calibrated. + Applicable to FSK and MIMO radios only." + ::={whispBoxStatus 110} + + radioEngKeyed OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied." + ::={whispBoxStatus 111} + + bridgeCbFecStatfloods OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB FEC Stats Floods (Multipoint AP only)" + ::={whispBoxStatus 112} + + bridgeCbRFStatfloods OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB RF Stats Floods (Multipoint AP only)" + ::={whispBoxStatus 113} + + catalinaGainRxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rcv Gain on Catalina Rx CH1. Engineering use only." + ::={whispBoxStatus 114} + + catalinaGainRxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rcv Gain on Catalina Rx CH2. Engineering use only." + ::={whispBoxStatus 115} + + antType OBJECT-TYPE + SYNTAX INTEGER { + integrated(0), + external(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether the antenna is integrated or external (connectorized)." + ::={whispBoxStatus 116} + + rfStatRcvCorruptControlCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Receive Corrupt Control Data Count" + ::={whispBoxStatus 117} + + numLBTDetections OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of LBT Detections since last boot." + ::={whispBoxStatus 118} + + bridgeCbEthAuxStatbin OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats bin" + ::={whispBoxStatus 119} + + bridgeCbEthAuxStatbout OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats bout" + ::={whispBoxStatus 120} + + catalinaAttenTxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Attenuation on Catalina Tx CH1. Engineering Use Only." + ::={whispBoxStatus 121} + + catalinaAttenTxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Attenuation on Catalina Tx CH2. Engineering use only." + ::={whispBoxStatus 122} + + catalinaCurrDetSetpointTxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Detector Setpoint on Catalina Tx CH1. Engineering Use Only." + ::={whispBoxStatus 123} + + catalinaCurrDetSetpointTxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Detector Setpoint on Catalina Tx CH2. Engineering use only." + ::={whispBoxStatus 124} + + catalinaCurrDetReadRefTxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Detector Reference on Catalina Tx CH1. Engineering Use Only." + ::={whispBoxStatus 125} + + catalinaCurrDetReadRefTxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Detector Reference on Catalina Tx CH2. Engineering use only." + ::={whispBoxStatus 126} + + catalinaCurrDetReadPowerOnTxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Detector PowerOn on Catalina Tx CH1. Engineering Use Only." + ::={whispBoxStatus 127} + + catalinaCurrDetReadPowerOnTxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Detector PowerOn on Catalina Tx CH2. Engineering use only." + ::={whispBoxStatus 128} + + catalinaOpenLoopAttenTxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Open Loop Attenuation on Catalina Tx CH1. Engineering Use Only." + ::={whispBoxStatus 129} + + catalinaOpenLoopAttenTxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Open Loop Attenuation on Catalina Tx CH2. Engineering use only." + ::={whispBoxStatus 130} + + catalinaTargetDetSetpointTxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Target Detector Setpoint on Catalina Tx CH1. Engineering Use Only." + ::={whispBoxStatus 131} + + catalinaTargetDetSetpointTxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Target Detector Setpoint on Catalina Tx CH2. Engineering use only." + ::={whispBoxStatus 132} + + catalinaGainReductionRxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Gain Reduction on Catalina Rx CH1. Engineering Use Only." + ::={whispBoxStatus 133} + + catalinaGainReductionRxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Gain Reduction on Catalina Rx CH2. Engineering use only." + ::={whispBoxStatus 134} + + catalinaLoAttenRxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Lo Attenuation on Catalina Rx CH1. Engineering Use Only." + ::={whispBoxStatus 135} + + catalinaLoAttenRxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Lo Attenuation on Catalina Rx CH2. Engineering use only." + ::={whispBoxStatus 136} + + catalinaTargetGainRxCH1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Target Gain on Catalina Rx CH1. Engineering Use Only." + ::={whispBoxStatus 137} + + catalinaTargetGainRxCH2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Target Gain on Catalina Rx CH2. Engineering use only." + ::={whispBoxStatus 138} + + bridgeCbEthAuxStatfloods OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats Floods (Multipoint AP only)" + ::={whispBoxStatus 139} + + bridgeCbEthAuxStatbtoss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats btoss" + ::={whispBoxStatus 141} + + bridgeCbEthAuxStatbtosscap OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats btosscap" + ::={whispBoxStatus 142} + + bridgeCbEthAuxStatuin OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats uin" + ::={whispBoxStatus 143} + + bridgeCbEthAuxStatuout OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats uout" + ::={whispBoxStatus 144} + + bridgeCbEthAuxStatutoss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats utoss" + ::={whispBoxStatus 145} + + bridgeCbEthAuxStatutosscap OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridge CB Eth Aux Stats utosscap" + ::={whispBoxStatus 146} + + radioWatchDogLogged OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This will be set either as 0 if there is no watchdog event logged or 1 if there is." + ::={whispBoxStatus 147} + + radioFatalErrorLogged OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This will be set either as 0 if there is no fatalerror event logged or 1 if there is." + ::={whispBoxStatus 148} + + fecStatLinkUptime OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uptime of main ethernet link in seconds" + ::={whispBoxStatus 149} + + fecAuxStatLinkUptime OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uptime of main ethernet link in seconds" + ::={whispBoxStatus 150} + + rfStatXmtMDataCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Transmit Multicast Data Count" + ::={whispBoxStatus 217} + + rfStatRcvMDataCnt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats Receive Multicast Data Count" + ::={whispBoxStatus 218} + + fecStatUnderSizedToss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Undersized Toss Count" + ::={whispBoxStatus 219} + + fecRxBabErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Error count in Babble Receiver." + ::={whispBoxStatus 220} + + fecTxHbErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets having Transmit heartbeat error." + ::={whispBoxStatus 221} + + fecEthBusErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet Busy Error Count" + ::={whispBoxStatus 222} + + fecCRCError OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets having CRC Error." + ::={whispBoxStatus 223} + + fecRxFifoNoBuf OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times could not get a buffer from Rx Fifo." + ::={whispBoxStatus 224} + + fecRxOverrun OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times Rx Fifo Overrun." + ::={whispBoxStatus 225} + + fecLateCollision OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets having late collision." + ::={whispBoxStatus 226} + + fecRetransLimitExp OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets whose retransmision limit expired." + ::={whispBoxStatus 227} + + fecTxUnderrun OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times Tx queue underrun." + ::={whispBoxStatus 228} + + fecCarSenseLost OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Carrier Sense Lost count." + ::={whispBoxStatus 229} + + fecNoCarrier OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No carrier asserted by external transceiver during transmission." + ::={whispBoxStatus 230} + + framePeriodCurrent OBJECT-TYPE + SYNTAX INTEGER { + twoPointFiveMs(0), + fiveMs(1), + scanning(2)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current frame period of the radio." + ::={whispBoxStatus 231} + + activeTxPowerStr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current transmit power level, including potential power backoff information. + Not applicable to PMP 450m." + ::={whispBoxStatus 232} + + activeTxPowerHdths OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current transmit power level, in hundredths of dBm. + Not appliable on PMP 450m." + ::={whispBoxStatus 233} + + poeT2Status OBJECT-TYPE + SYNTAX INTEGER { + error(0), + notPresent(1), + notPresentAndIgnored(2), + present(3)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the 802.3at Type 2 Classification status. This is only available on the 450i." + ::={whispBoxStatus 234} + + fecAuxStatLinkDetected OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet link detected count" + ::={whispBoxStatus 235} + + fecAuxStatLinkLost OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet ink lost count" + ::={whispBoxStatus 236} + + fecAuxInDiscardsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet in discards count." + ::={whispBoxStatus 237} + + fecAuxInErrorsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet in errors count." + ::={whispBoxStatus 238} + + fecAuxOutDiscardsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet out discards count." + ::={whispBoxStatus 239} + + fecAuxOutErrorsCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet out errors count." + ::={whispBoxStatus 240} + + fecAuxCRCError OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Number of packets having CRC Error." + ::={whispBoxStatus 241} + + fecAuxRxOverrun OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Number of times Rx Fifo Overrun." + ::={whispBoxStatus 242} + + fecAuxLateCollision OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Number of packets having late collision." + ::={whispBoxStatus 243} + + fecAuxRetransLimitExp OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Number of packets whose retransmision limit expired." + ::={whispBoxStatus 244} + + fecAuxTxUnderrun OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Number of times Tx queue underrun." + ::={whispBoxStatus 245} + + fecAuxCarSenseLost OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Carrier Sense Lost count." + ::={whispBoxStatus 246} + + fecAuxNoCarrier OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet No carrier asserted by external transceiver during transmission." + ::={whispBoxStatus 247} + + fecAuxLargeFrame OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Large Frame Error." + ::={whispBoxStatus 248} + + fecAuxRuntFrame OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "450i Aux Ethernet Runt Frame Error." + ::={whispBoxStatus 249} + + fecLargeFrame OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Large Frame Error." + ::={whispBoxStatus 250} + + fecRuntFrame OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Runt Frame Error." + ::={whispBoxStatus 251} + + soundingStatClear OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sounding Stat Clear + Set to any value to clear all Sounding Stats" + ::={whispBoxStatus 252} + + soundingStatRequestCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Request Count" + ::={whispBoxStatus 253} + + soundingStatResponseCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Response Count" + ::={whispBoxStatus 254} + + soundingStatRequestsIgnored OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Requests Ignored" + ::={whispBoxStatus 255} + + soundingStatAvgRequestInterval OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Avg Request Interval (ms)" + ::={whispBoxStatus 256} + + soundingStatMaxRequestInterval OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Max Request Interval (ms)" + ::={whispBoxStatus 257} + + soundingStatErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Error Count" + ::={whispBoxStatus 258} + + camAccID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "CnMaestro Account to which Radio is onboarded." + ::={whispBoxStatus 259} + + cnMaestroStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "CnMaestro connection status." + ::={whispBoxStatus 260} + + daVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Device Agent Version number." + ::={whispBoxStatus 261} + + soundingStatRequestsDropped OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Requests Dropped" + ::={whispBoxStatus 262} + + soundingStatResponsesSuppressed OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Responses Suppressed" + ::={whispBoxStatus 263} + + soundingStatVersionMismatch OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sounding Stats Version Mismatch" + ::={whispBoxStatus 264} + + hardwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Read directly from the resistors on the board is the form Major.Minor (cnMedusa-specific, Engineering Only)" + ::={whispBoxStatus 265} + + productTypeName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Basic product type, based on board type and factory programming." + ::={whispBoxStatus 266} + + radioStatusTransmitControlOverridden OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Transmit mode control is overridden in config + PMP 450m only." + ::={whispBoxStatus 267} + + radioStatusTrackingFailure OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Feedback tracking loop is out of tolerance - Transmit disabled + PMP 450m only." + ::={whispBoxStatus 268} + + radioStatusSectorWeightsOff OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sector mode weights disabled + PMP 450m only." + ::={whispBoxStatus 269} + + radioStatusRxBeamFormingOff OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rx beamforming disabled + PMP 450m only." + ::={whispBoxStatus 270} + + radioStatusPowerDetectorInactive OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power detector control not active + PMP 450m only." + ::={whispBoxStatus 271} + + radioStatusCatQuadCalFail OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Catalina Tx quadrature calibration failure + 450 platform only. Engineering use only." + ::={whispBoxStatus 272} + + nearFieldOperationActive OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(0)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When true(1) near field operation is enabled and near + field range correction is being applied. + PMP 450m only." + ::={whispBoxStatus 273} + + radioStatusAlarmReason OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reason code associated with the cause of a Radio Status Alarm being triggered. + Provide this code to Cambium Networks Support. + PMP 450m only." + ::={whispBoxStatus 274} + + radioStatusAlarm OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(0)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio Status Alarm. + PMP 450m only." + ::={whispBoxStatus 275} + + forceReassessmentActive OBJECT-TYPE + SYNTAX INTEGER { + true(1), + false(0)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When true(1) forced channel assessment is enabled. + MU-MIMO only." + ::={whispBoxStatus 276} + + fecExcessiveDeferrals OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Excessive Deferrals." + ::={whispBoxStatus 277} + + rfInDiscardsCountExt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extended RF in discards count with 64 bit counters." + ::={whispBoxStatus 278} + + rfInErrorsCountExt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extended RF in errors count with 64 bit counters." + ::={whispBoxStatus 279} + + rfOutDiscardsCountExt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extended RF out discards count with 64 bit counters." + ::={whispBoxStatus 280} + + rfOutErrorsCountExt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extended RF out errors count with 64 bit counters." + ::={whispBoxStatus 281} + + boardModel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Returns Board model of the device." + ::={whispBoxStatus 284} + +-- The following definitions deal with Canopy Box Level configuration variables. + + linkNegoSpeed OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Link negotiation speeds. + H10BT -- 10 Base T Half Duplex, + F10BT -- 10 Base T Full Duplex, + H100BT -- 100 Base T Half Duplex, + F100BT -- 100 Base T Full Duplex. + Separate the values with comma when doing a set. + e.g. H10BT,F10BT,H100BT,F100BT" + ::={whispBoxConfig 1} + + colorCode OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Color code." + ::={whispBoxConfig 2} + + displayOnlyAccess OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "This variable is deprecated." + ::={whispBoxConfig 3} + + fullAccess OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Full access password." + ::={whispBoxConfig 4} + + webAutoUpdate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Web page auto update in seconds. 0 means disabled." + ::={whispBoxConfig 5} + + pass1Status OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Password 1(display only) status." + ::={whispBoxConfig 6} + + pass2Status OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Password 2(full access) status." + ::={whispBoxConfig 7} + + bridgeEntryTimeout OBJECT-TYPE + SYNTAX INTEGER (25..1440) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Bridge table time out Range : 25 -- 1440 Minutes." + ::={whispBoxConfig 8} + + snmpMibPerm OBJECT-TYPE + SYNTAX INTEGER { + readWrite(0), + readOnly(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Read/Write permission for MIB groups." + ::={whispBoxConfig 9} + + bhTimingMode OBJECT-TYPE + SYNTAX INTEGER { + timingMaster(1), + timeingSlave(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Variable to switch between Timing Master and Timing Slave. + For Backhaul units only." + ::={whispBoxConfig 10} + + bhModulation OBJECT-TYPE + SYNTAX INTEGER { + tenMbitsPerSecond(0), + twentyMbitsPerSecond(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Modulation scheme. For Backhaul units only. Only level 4 + backhaul can be changed to 20Mbits/Second." + ::={whispBoxConfig 11} + + powerControl OBJECT-TYPE + SYNTAX INTEGER { + low(0), + normal(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Power control. + FSK Only." + ::={whispBoxConfig 12} + + extFilterDelay OBJECT-TYPE + SYNTAX INTEGER + UNITS "nanoseconds" + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. External Filters Delay. For 900MHz FSK radios only." + ::={whispBoxConfig 13} + + antennaGain OBJECT-TYPE + SYNTAX INTEGER + UNITS "dBi" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "External Antenna Gain. For radios that uses an external antenna or the DFS feature. + Not applicable to PMP 450m." + ::={whispBoxConfig 14} + + eirp OBJECT-TYPE + SYNTAX INTEGER + UNITS "dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Transmit EIRP of radio. + PMP 450m only." + ::={whispBoxConfig 15} + + dynamicLearning OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable VLAN dynamic learning." + ::={whispBoxConfig 16} + + managementVID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management VLAN VID." + ::={whispBoxConfig 17} + + agingTimeout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Aging timeout." + ::={whispBoxConfig 18} + + frameType OBJECT-TYPE + SYNTAX INTEGER { + allframes(0), + taggedonly(1), + untaggedonly(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow only tagged frame." + ::={whispBoxConfig 19} + + addVlanMember OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Write-Only OID,Add VLAN number which needs to be added." + ::={whispBoxConfig 20} + + removeVlanMember OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Write-only OID,Enter VLAN ID which needs to deleted. + If Vlan doesnot exist an error will be returned." + ::={whispBoxConfig 21} + + scheduling OBJECT-TYPE + SYNTAX INTEGER { + hardware(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To use hardware or software scheduling" + ::={whispBoxConfig 22} + + transmitterOP OBJECT-TYPE + SYNTAX INTEGER + UNITS "dBm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Transmitter output power. This is not available on OFDM SMs. + Not applicable for PMP 450m. See EIRP OID." + ::={whispBoxConfig 23} + + bridgeEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(0), + disable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Disable or enable bridging functionality for a BH unit." + ::={whispBoxConfig 24} + + fecEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Disable or enable FEC error correction functionality + for multipoint units." + ::={whispBoxConfig 25} + + trapIP1 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap1." + ::={whispBoxConfig 26} + + trapIP2 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap2." + ::={whispBoxConfig 27} + + trapIP3 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap3." + ::={whispBoxConfig 28} + + trapIP4 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap4." + ::={whispBoxConfig 29} + + trapIP5 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap5." + ::={whispBoxConfig 30} + + trapIP6 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap6." + ::={whispBoxConfig 31} + + trapIP7 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap7." + ::={whispBoxConfig 32} + + trapIP8 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap8." + ::={whispBoxConfig 33} + + trapIP9 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap9." + ::={whispBoxConfig 34} + + trapIP10 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Obsoleted. Configure with whispBoxDNS.trap10." + ::={whispBoxConfig 35} + + commStringRWrite OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Read/Write Community string. This is a write-only OID." + ::={whispBoxConfig 36} + + subnetMask OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 1." + ::={whispBoxConfig 37} + + mngtIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 1." + ::={whispBoxConfig 38} + + allowVIDAccess OBJECT-TYPE + SYNTAX INTEGER { + enable(0), + disable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow or disallow local SM management VID access." + ::={whispBoxConfig 39} + + setDefaultPlug OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If enabled parameters are set to Factory Defaults upon default plug mode detection." + ::={whispBoxConfig 40} + + hwsCompatibility OBJECT-TYPE + SYNTAX INTEGER { + enable(0), + disable(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "If enable, it ensures 6.0 compatibility with HWS." + ::={whispBoxConfig 41} + + gpsInput OBJECT-TYPE + SYNTAX INTEGER { + generateSyncSignal(0), + syncToReceivedSignalTimingPort(1), + syncToReceivedSignalPowerPort(2), + syncToiGPS(3), + autoSync(4), + autoSyncFreeRun(5)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Values 1, 2, 3 have been deprecated. + (0) Generate AP sync signal. + (1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync. + (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run. + (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run. + (4) AutoSync. + (5) AutoSync plus Free Run." + ::={whispBoxConfig 42} + + ism OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable ISM on 5.7GHz frequency band radios." + ::={whispBoxConfig 43} + + hiPriority OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Enable Hi Priority Data Queue on BH radios." + ::={whispBoxConfig 44} + + userName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User name.To create read-only user set userMode OID first. + Maximum of 4 users can exist in system." + ::={whispBoxConfig 45} + + userPassword OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User password.To create read-only user set userMode OID first." + ::={whispBoxConfig 46} + + userAccessLevel OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User access level.To create read-only user set userMode OID first. + 1=TECH + 2=INSTALL + 3=ADMIN" + ::={whispBoxConfig 47} + + deleteUser OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User name to remove." + ::={whispBoxConfig 48} + + twoXRate OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To enable or disable double rate." + ::={whispBoxConfig 49} + + lanDhcpState OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable LAN Interface DHCP feature." + ::={whispBoxConfig 50} + + sessionTimeout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Timer for Telnet, Web and FTP sessions." + ::={whispBoxConfig 51} + + vlanMemberSource OBJECT-TYPE + SYNTAX INTEGER { + configured(0), + active(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specified the VLAN member source to display. 0=configured, 1=active configuration. + Note that this OID is internal to SNMP and is not available at the Web Interface." + ::={whispBoxConfig 52} + + addCustomFreqList OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Add Custom Frequencies. + The frequencies can be in a variety of units up to KHz. + Frequencies can be added in a list separated by commas. + Example: 3550, 356000, 3450001. + A get will return the current custom frequency list. + Max string length entered cannot exceed 128 character. + Note if there is not enough room for all the frequencies none will be added. + Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz." + ::={whispBoxConfig 53} + + removeCustomFreqList OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Remove Custom Frequencies. + The frequencies can be in a variety of units up to KHz. + Frequencies can be removed in a list separated by commas. + Example: 3550, 356000, 3450001. + A get will return the current custom frequencies. + Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz." + ::={whispBoxConfig 54} + + allowColocation OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters." + ::={whispBoxConfig 55} + + changeUsrPwd OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow to change the password of a given user of a given user. Usage: userName,password." + ::={whispBoxConfig 56} + +-- The following definitions deal with the allowed SNMP IP & subnet masks + + mngtIP2 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 2." + ::={whispBoxConfig 57} + + subnetMask2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 2." + ::={whispBoxConfig 58} + + mngtIP3 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 3." + ::={whispBoxConfig 59} + + subnetMask3 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 3." + ::={whispBoxConfig 60} + + mngtIP4 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 4." + ::={whispBoxConfig 61} + + subnetMask4 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 4." + ::={whispBoxConfig 62} + + mngtIP5 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 5." + ::={whispBoxConfig 63} + + subnetMask5 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 5." + ::={whispBoxConfig 64} + + mngtIP6 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 6." + ::={whispBoxConfig 65} + + subnetMask6 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 6." + ::={whispBoxConfig 66} + + mngtIP7 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 7." + ::={whispBoxConfig 67} + + subnetMask7 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 7." + ::={whispBoxConfig 68} + + mngtIP8 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 8." + ::={whispBoxConfig 69} + + subnetMask8 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 8." + ::={whispBoxConfig 70} + + mngtIP9 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 9." + ::={whispBoxConfig 71} + + subnetMask9 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 9." + ::={whispBoxConfig 72} + + mngtIP10 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Management IP address 10." + ::={whispBoxConfig 73} + + subnetMask10 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for the management IP 10." + ::={whispBoxConfig 74} + + bhvlanEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable VLAN for Backhaul Master/Slave." + ::={whispBoxConfig 75} + + lldpBroadcastEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable Broadcast of LLDP message, if disabled LLDP uses multicast" + ::={whispBoxConfig 76} + + regionCode OBJECT-TYPE + SYNTAX INTEGER { + none(0), + australia(6), + brazil(5), + canada(3), + india(8), + indonesia(10), + ireland(11), + russia(7), + spain(9), + us(2), + other(1), + europe(4)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Set Region Code for the Unit. Used the individual region[Region] OIDs instead." + ::={whispBoxConfig 77} + + russiaRegion OBJECT-TYPE + SYNTAX INTEGER { + category1(1), + category2(2), + category3(3), + category4(4)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now." + ::={whispBoxConfig 78} + + commStringROnly OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set Read Only commnunity string." + ::={whispBoxConfig 79} + + ethernetLinkSpeed OBJECT-TYPE + SYNTAX INTEGER { + forced10H(1), + forced10F(2), + forced100H(4), + forced100F(8), + auto10F-10H(3), + auto100H-10H(5), + auto100H-10F-10H(7), + auto100F-100H(12), + auto100F-100H-10H(13), + auto100F-100H-10F-10H(15), + auto1000F-100F-100H-10F-10H(63)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds." + ::={whispBoxConfig 80} + + cyclicPrefix OBJECT-TYPE + SYNTAX INTEGER { + one-quarter(0), + one-eighth(1), + one-sixteenth(2), + one-quarter-one-eighth(3), + one-quarter-one-sixteenth(4), + one-eighth-one-sixteenth(5), + one-quarter-one-eighth-one-sixteenth(6)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Cyclic Prefix value, for OFDM Radios only. + Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode)." + ::={whispBoxConfig 81} + + numberCustomFreq OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of custom frequencies added. + There is a maximum of 100. + For use on 3.5 GHz OFDM Radios only." + ::={whispBoxConfig 82} + + channelBandwidth OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current channel bandwidth in MHz. + For use on OFDM Radios only. + Obsoleted for MIMO SMs." + ::={whispBoxConfig 83} + + setDefaults OBJECT-TYPE + SYNTAX INTEGER { + noChangeOrUndoFactoryDefaults(0), + setToFactoryDefaults(1), + factoryDefaultsSet-AwaitingReboot(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 + will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting. + Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and + we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID + prior to reboot. As a security measure, this OID is only valid when the radio was booted in default plug + mode. If the radio is not currently in default plug mode, then attempting to set this OID will fail." + ::={whispBoxConfig 84} + + radioRateAdapt OBJECT-TYPE + SYNTAX INTEGER { + onex(0), + onexmimo(4), + onextwox(1), + onextwoxmimo(5), + onextwoxthreex(2), + onextwoxthreexfourx(3), + onextwoxfourx(7), + onextwoxfourxsixx(8), + onextwoxfourxsixxeightx(9), + onextwoxmimoa(10), + onextwoxthreexmimoa(11), + onextwoxthreexfourxmimoa(12)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Rate adaptation parameter + 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) + 1: 1x/2x (FSK and SISO OFDM 16-QAM) + + Following are OFDM only: + 2: 1x/2x/3x (SISO OFDM 64-QAM) + 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only + + Following are MIMO OFDM only: + 4: 1x MIMO-A (QPSK duplicated on both paths) + 5: 1x/2x MIMO-B (QPSK on each path) + 7: 1x/2x/4x MIMO-B (16-QAM on each path) + 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) + 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) + 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) + 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) + 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) + + For PMP 430 radios this applies to Downlink Rate Adapt only. + Use radioRateAdaptUL for setting uplink rate adapt on PMP 430 radios. + For PMP 450 radios, write access for engineering use only." + ::={whispBoxConfig 85} + + siteInfoViewable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable non login users the ability to view Site Information" + ::={whispBoxConfig 86} + + largeVCQ OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed." + ::={whispBoxConfig 87} + + latitude OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The latitude setting of this unit in decimal degrees." + ::={whispBoxConfig 88} + + longitude OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The longitude setting of this unit in decimal degrees." + ::={whispBoxConfig 89} + + height OBJECT-TYPE + SYNTAX INTEGER (-2147483647..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The height setting of this unit in meters." + ::={whispBoxConfig 90} + + bandwidth OBJECT-TYPE + SYNTAX INTEGER { + bandwidth5mhz(1), + bandwidth7mhz(2), + bandwidth10mhz(3), + bandwidth15mhz(4), + bandwidth20mhz(5), + bandwidth30mhz(6), + bandwidth40mhz(7)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Radio bandwidth setting. + Obsoleted for MIMO SMs. Instead for MIMO SMs use OID bandwidthScan." + ::={whispBoxConfig 91} + + dataScramblingMethod OBJECT-TYPE + SYNTAX INTEGER { + legacyDataScrambling(0), + r10DataScrambling(1)} + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "This OID is for OFDM only and is obsolete." + ::={whispBoxConfig 92} + + portVID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Backhaul Port VID (PVID)." + ::={whispBoxConfig 93} + + radioRateAdaptUL OBJECT-TYPE + SYNTAX INTEGER { + onex(0), + onexmimo(4), + onextwox(1), + onextwoxmimo(5), + onextwoxthreex(2), + onextwoxthreexfourx(3), + onextwoxfourx(7), + onextwoxfourxsixx(8), + onextwoxfourxsixxeightx(9), + onextwoxmimoa(10), + onextwoxthreexmimoa(11), + onextwoxthreexfourxmimoa(12)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Uplink Rate adaptation parameter + 0: 1x No rate adaptation (FSK and SISO OFDM QPSK) + 1: 1x/2x (FSK and SISO OFDM 16-QAM) + + Following are OFDM only: + 2: 1x/2x/3x (SISO OFDM 64-QAM) + 3: 1x/2x/3x/4x (SISO OFDM 256-QAM) Engineering only + + Following are MIMO OFDM only: + 4: 1x MIMO-A (QPSK duplicated on both paths) + 5: 1x/2x MIMO-B (QPSK on each path) + 7: 1x/2x/4x MIMO-B (16-QAM on each path) + 8: 1x/2x/4x/6x MIMO-B (64-QAM on each path) + 9: 1x/2x/4x/6x/8x MIMO-B (256-QAM on each path) + 10: 1x/2x MIMO-A (16-QAM duplicated on both paths) + 11: 1x/2x/3x MIMO-A (64-QAM duplicated on both paths) + 12: 1x/2x/3x/4x MIMO-A (256-QAM duplicated on both paths) + + For PMP 430 radios this applies to Uplink Rate Adapt only. + Use radioRateAdapt for setting downlink rate adapt on PMP 430 radios. + For PMP 450 radios, engineering use only." + ::={whispBoxConfig 94} + + providerVID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provider VID for QinQ VLAN." + ::={whispBoxConfig 95} + + mac1VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 1 in MAC Address VID Mapping Table." + ::={whispBoxConfig 96} + + mac1VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 1 in MAC Address VID Mapping Table." + ::={whispBoxConfig 97} + + mac2VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 2 in MAC Address VID Mapping Table." + ::={whispBoxConfig 98} + + mac2VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 2 in MAC Address VID Mapping Table." + ::={whispBoxConfig 99} + + mac3VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 3 in MAC Address VID Mapping Table." + ::={whispBoxConfig 100} + + mac3VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 3 in MAC Address VID Mapping Table." + ::={whispBoxConfig 101} + + mac4VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 4 in MAC Address VID Mapping Table." + ::={whispBoxConfig 102} + + mac4VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 4 in MAC Address VID Mapping Table." + ::={whispBoxConfig 103} + + mac5VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 5 in MAC Address VID Mapping Table." + ::={whispBoxConfig 104} + + mac5VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 5 in MAC Address VID Mapping Table." + ::={whispBoxConfig 105} + + mac6VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 6 in MAC Address VID Mapping Table." + ::={whispBoxConfig 106} + + mac6VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 6 in MAC Address VID Mapping Table." + ::={whispBoxConfig 107} + + mac7VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 7 in MAC Address VID Mapping Table." + ::={whispBoxConfig 108} + + mac7VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 7 in MAC Address VID Mapping Table." + ::={whispBoxConfig 109} + + mac8VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 8 in MAC Address VID Mapping Table." + ::={whispBoxConfig 110} + + mac8VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 8 in MAC Address VID Mapping Table." + ::={whispBoxConfig 111} + + mac9VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 9 in MAC Address VID Mapping Table." + ::={whispBoxConfig 112} + + mac9VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 9 in MAC Address VID Mapping Table." + ::={whispBoxConfig 113} + + mac10VIDMapAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MAC Address for Entry 10 in MAC Address VID Mapping Table." + ::={whispBoxConfig 114} + + mac10VIDMapVid OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID for Entry 10 in MAC Address VID Mapping Table." + ::={whispBoxConfig 115} + + vlanPortType OBJECT-TYPE + SYNTAX INTEGER { + q(0), + qinq(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VLAN Port Type for VLAN interface. Default is Q." + ::={whispBoxConfig 116} + + vlanAcceptQinQFrames OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP." + ::={whispBoxConfig 117} + + whispWebUserAccessMode OBJECT-TYPE + SYNTAX INTEGER { + local(0), + remote(1), + remotethenlocal(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable selects if web page users for the radio should be authenticated locally or + via a centralised remote Radius server" + ::={whispBoxConfig 118} + + usrAccountEnableAccounting OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + deviceAccess(1), + dataUsage(2), + all(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the level of accounting information to be reported to the server" + ::={whispBoxConfig 119} + + allowRejectThenLocal OBJECT-TYPE + SYNTAX INTEGER { + doNotAllowLocalAuthifAAAReject(0), + allowLocalAuthIfAAAReject(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for allowing local authenication if the AAA remote server" + ::={whispBoxConfig 120} + + snrCalculation OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance." + ::={whispBoxConfig 121} + + priorityPrecedence OBJECT-TYPE + SYNTAX INTEGER { + eight021pThenDiffServ(0), + diffservThenEight021p(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions." + ::={whispBoxConfig 122} + + installationColorCode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled + in order to facilitate remote provisioning." + ::={whispBoxConfig 123} + + apSmMode OBJECT-TYPE + SYNTAX INTEGER { + sm(1), + ap(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. + Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP." + ::={whispBoxConfig 124} + + pppoeFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set PPPoE packet filter." + ::={whispBoxConfig 125} + + smbFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set SMB packet filter." + ::={whispBoxConfig 126} + + snmpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set SNMP packet filter." + ::={whispBoxConfig 127} + + userP1Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 1 packet filter." + ::={whispBoxConfig 128} + + userP2Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 2 packet filter." + ::={whispBoxConfig 129} + + userP3Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 3 packet filter." + ::={whispBoxConfig 130} + + allOtherIpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set all other IPv4 packet filter." + ::={whispBoxConfig 131} + + allIpv4Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, + IPv4 Mcast, User Defined Ports, and All Other IPv4)." + ::={whispBoxConfig 132} + + arpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set ARP packet filter." + ::={whispBoxConfig 133} + + allOthersFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set all other packet filter when." + ::={whispBoxConfig 134} + +-- User Defined Port Filtering Configuration + + userDefinedPort1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An integer value of number one user defined port. Range:0-65535" + ::={whispBoxConfig 135} + + port1TCPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 1 TCP traffic filter." + ::={whispBoxConfig 136} + + port1UDPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 1 UDP traffic filter." + ::={whispBoxConfig 137} + + userDefinedPort2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An integer value of number two user defined port. Range:0-65535" + ::={whispBoxConfig 138} + + port2TCPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 2 TCP traffic filter." + ::={whispBoxConfig 139} + + port2UDPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 2 UDP traffic filter." + ::={whispBoxConfig 140} + + userDefinedPort3 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An integer value of number three user defined port. Range:0-65535" + ::={whispBoxConfig 141} + + port3TCPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 3 TCP traffic filter." + ::={whispBoxConfig 142} + + port3UDPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set user defined port 3 UDP traffic filter." + ::={whispBoxConfig 143} + + bootpcFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set bootp client sourced packets filter." + ::={whispBoxConfig 144} + + bootpsFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set bootp server sourced packets filter." + ::={whispBoxConfig 145} + + ip4MultFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set IPv4 MultiCast packets filter when + NAT is disabled." + ::={whispBoxConfig 146} + + packetFilterDirection OBJECT-TYPE + SYNTAX INTEGER { + upstream(1), + downstream(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set packet filter direction. Upstream is default." + ::={whispBoxConfig 147} + + encryptionConfig OBJECT-TYPE + SYNTAX INTEGER { + des(0), + aes(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "For supported radio, set the encryption algorithm to use. + DES by default. Cannot be set if encryption is disabled." + ::={whispBoxConfig 148} + + pppoeCtlPriority OBJECT-TYPE + SYNTAX INTEGER { + normal(0), + high(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Prioritization of PPPoE Control packets." + ::={whispBoxConfig 149} + + ftpPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port used to for FTP. Default is 21." + ::={whispBoxConfig 150} + + httpPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port used to for HTTP. Default is 80." + ::={whispBoxConfig 151} + + httpsPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port used to for HTTPs. Default is 443." + ::={whispBoxConfig 152} + + snmpPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port used to for SNMP. Default is 161." + ::={whispBoxConfig 153} + + snmpTrapPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port used to for SNMP Traps. Default is 162." + ::={whispBoxConfig 154} + + webAccess OBJECT-TYPE + SYNTAX INTEGER { + http(0), + https(1), + http-and-https(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable determines if only HTTP or HTTPs connection are allowed. + 0: HTTP Only + 1: HTTPs Only + 2: HTTP and HTTPs Both" + ::={whispBoxConfig 155} + + syslogDomainNameAppend OBJECT-TYPE + SYNTAX INTEGER { + disableDomain(0), + appendDomain(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select whether to append the configured management domain name to + the Syslog server name. For example, if dnsMgmtDomainName is + set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend + is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'." + ::={whispBoxConfig 156} + + syslogServerAddr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name" + ::={whispBoxConfig 157} + + syslogServerPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Listening port on the Syslog server. Default is 514." + ::={whispBoxConfig 158} + + syslogMinLevel OBJECT-TYPE + SYNTAX INTEGER { + fatal(0), + alert(1), + critical(2), + error(3), + warning(4), + notice(5), + info(6), + debug(7)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted." + ::={whispBoxConfig 159} + + allIpv6Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set all IPv6 packet filter. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp, + IPv6 Mcast, User Defined Ports, and All Other IPv6)." + ::={whispBoxConfig 160} + + ipv6smbFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set IPv6 SMB packet filter." + ::={whispBoxConfig 161} + + ipv6snmpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set IPv6 SNMP packet filter." + ::={whispBoxConfig 162} + + ipv6bootpcFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set IPv6 bootp client sourced packets filter." + ::={whispBoxConfig 163} + + ipv6bootpsFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set IPv6 bootp server sourced packets filter." + ::={whispBoxConfig 164} + + ipv6MultFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set IPv6 MultiCast packets filter when + NAT is disabled." + ::={whispBoxConfig 165} + + allOtherIpv6Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set all other IPv6 packet filter." + ::={whispBoxConfig 166} + + snmpStatus OBJECT-TYPE + SYNTAX INTEGER { + snmpv2only(1), + snmpv3only(2), + snmpv2-and-snmpv3(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable determines SNMP operation mode. + 1: Enable SNMPv2c only + 2: Enable SNMPv3 only + 3: Enable SNMPv2c and SNMPv3" + ::={whispBoxConfig 167} + + telnetStatus OBJECT-TYPE + SYNTAX INTEGER { + disabletelnet(0), + enabletelnet(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable determines if Telnet to enabled or not. + 0: Disable Telnet + 1: Enable Telnet" + ::={whispBoxConfig 168} + + ftpStatus OBJECT-TYPE + SYNTAX INTEGER { + disableftp(0), + enableftp(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable determines if FTP to enabled or not. + 0: Disable FTP + 1: Enable FTP" + ::={whispBoxConfig 169} + + tftpStatus OBJECT-TYPE + SYNTAX INTEGER { + disabletftp(0), + enabletftp(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable determines if TFTP is enabled or not. + 0: Disable TFTP + 1: Enable TFTP" + ::={whispBoxConfig 170} + + userMode OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User Mode 1=Read-Only 0=Read-Write(default)." + ::={whispBoxConfig 171} + + tcpAckPriority OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Prioritize TCP ACK that are 64 bytes or less." + ::={whispBoxConfig 172} + + codePointSelect OBJECT-TYPE + SYNTAX INTEGER { + cp1(1), + cp2(2), + cp3(3), + cp4(4), + cp5(5), + cp6(6), + cp7(7), + cp8(8), + cp9(9), + cp10(10), + cp11(11), + cp12(12), + cp13(13), + cp14(14), + cp15(15), + cp16(16), + cp17(17), + cp18(18), + cp19(19), + cp20(20), + cp21(21), + cp22(22), + cp23(23), + cp24(24), + cp25(25), + cp26(26), + cp27(27), + cp28(28), + cp29(29), + cp30(30), + cp31(31), + cp32(32), + cp33(33), + cp34(34), + cp35(35), + cp36(36), + cp37(37), + cp38(38), + cp39(39), + cp40(40), + cp41(41), + cp42(42), + cp43(43), + cp44(44), + cp45(45), + cp46(46), + cp47(47), + cp49(49), + cp50(50), + cp51(51), + cp52(52), + cp53(53), + cp54(54), + cp55(55), + cp57(57), + cp58(58), + cp59(59), + cp60(60), + cp61(61), + cp62(62), + cp63(63)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Codepoint Select.This represents the CodePoint Selection to be modified via Priority Select" + ::={whispBoxConfig 173} + + prioritySelect OBJECT-TYPE + SYNTAX INTEGER { + p0(0), + p1(1), + p2(2), + p3(3), + p4(4), + p5(5), + p6(6), + p7(7)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Priority Select.The priority setting input for the CodePoint selected in CodePoint Select." + ::={whispBoxConfig 174} + + auxPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable(1) or Disable(0) aux ethernet port on 450i radio" + ::={whispBoxConfig 175} + + poeAuxEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable(1) or Disable(0) aux ethernet port PoE on 450i radio" + ::={whispBoxConfig 176} + + whispUsrAuth OBJECT-TYPE + SYNTAX INTEGER { + md5(0), + peap-mschapv2(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select method for User Authentication." + ::={whispBoxConfig 177} + + lan1DhcpRelease OBJECT-TYPE + SYNTAX INTEGER { + releaseIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to '1' will release LAN1's IP address + and send a DHCP Release Message to the DHCP server. + Applicable only when NAT is disabled." + ::={whispBoxConfig 201} + + lan1DhcpRenew OBJECT-TYPE + SYNTAX INTEGER { + renewIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to '1' will renew LAN1's lease time + for its current IP address. + Applicable only when NAT is disabled." + ::={whispBoxConfig 202} + + lan3DhcpRelease OBJECT-TYPE + SYNTAX INTEGER { + releaseIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to '1' will release LAN3's (RF Public) IP address + and send a DHCP Release Message to the DHCP server. + Applicable only when NAT is enabled." + ::={whispBoxConfig 203} + + lan3DhcpRenew OBJECT-TYPE + SYNTAX INTEGER { + renewIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to '1' will renew LAN3's (RF Public) + lease time for its current IP address. + Applicable only when NAT is enabled." + ::={whispBoxConfig 204} + + natDhcpRelease OBJECT-TYPE + SYNTAX INTEGER { + releaseIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to '1' will release WAN's (NAT Public) IP address + and send a DHCP Release Message to the DHCP server. + Applicable only when NAT is enabled." + ::={whispBoxConfig 205} + + natDhcpRenew OBJECT-TYPE + SYNTAX INTEGER { + renewIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to '1' will renew WAN's (NAT Public) + lease time for its current IP address. + Applicable only when NAT is enabled." + ::={whispBoxConfig 206} + + region OBJECT-TYPE + SYNTAX INTEGER { + none(0), + otherRegulatory(1), + asia(6), + europe(3), + northAmerica(2), + oceania (5), + southAmerica(4), + africa(7)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Set Region Code for the Unit." + ::={whispBoxConfig 207} + + regionAsia OBJECT-TYPE + SYNTAX INTEGER { + none(0), + india(2), + indonesia(3), + russiacategory1(4), + russiacategory2(5), + russiacategory3(6), + russiacategory4(7), + vietnam(8), + malaysia(10), + pakistan(11)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Country Code for Asia." + ::={whispBoxConfig 208} + + regionEurope OBJECT-TYPE + SYNTAX INTEGER { + none(0), + spain(2), + ireland(3), + denmark(4), + finland(5), + germany(6), + greece(7), + iceland(8), + liechtenstein(9), + norway(10), + portugal(11), + switzerland(12), + serbia(13), + unitedkingdom(14), + other(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Country Code for Europe. Other is only available for units with EU Region Lock." + ::={whispBoxConfig 209} + + regionNorthAmerica OBJECT-TYPE + SYNTAX INTEGER { + none(0), + canada(3), + unitedStates(2), + mexico(4), + puertoRico(5)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Country Code for North America." + ::={whispBoxConfig 210} + + regionOceania OBJECT-TYPE + SYNTAX INTEGER { + none(0), + australia(2), + newZealand(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Country Code for Oceania." + ::={whispBoxConfig 211} + + regionSouthAmerica OBJECT-TYPE + SYNTAX INTEGER { + none(0), + brazil(2), + ecuador(3), + colombia(4), + venezuela(5), + panama(6)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Country Code for South America." + ::={whispBoxConfig 212} + + regionOtherRegulatory OBJECT-TYPE + SYNTAX INTEGER { + none(0), + other(1), + fcc(2), + etsi(3), + etsilbt(4)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Regulatory setting for governing regulatory body." + ::={whispBoxConfig 213} + + interleave OBJECT-TYPE + SYNTAX INTEGER { + default(0), + disabled(1), + enabled(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Engineering use only." + ::={whispBoxConfig 214} + + receiveQualityDebug OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable receive quality calculations for every packet. + Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH. + Default to disabled for all radios. + Only applicable to GenII OFDM products and up." + ::={whispBoxConfig 215} + + apType OBJECT-TYPE + SYNTAX INTEGER { + standard(0), + remote(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "In standard mode, all possible sync sources will be made availble and usedfor autoSync operation. + In remote mode, sync over power port will not be available as a sync source. + Remote Device mode is where the AP or BHM timing port is connected to an SM or BHS timing port via a sync cable. In this mode, + GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other + sync over power device is in use, then select standard mode. + This should really be named deviceType because this applies to both AP and BHM, but left this as apType for legacy purposes." + ::={whispBoxConfig 216} + + regionAfrica OBJECT-TYPE + SYNTAX INTEGER { + none(0), + algeria(2), + nigeria(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Country Code for Africa." + ::={whispBoxConfig 217} + + addCustomFreqMimo OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'." + ::={whispBoxConfig 218} + + removeCustomFreqMimo OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'." + ::={whispBoxConfig 219} + + timedSpectrumAnalysisDurationBox OBJECT-TYPE + SYNTAX INTEGER (10..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds." + ::={whispBoxConfig 220} + + spectrumAnalysisActionBox OBJECT-TYPE + SYNTAX INTEGER { + stopSpectrumAnalysis(0), + startTimedSpectrumAnalysis(1), + startContinuousSpectrumAnalysis(2), + idleNoSpectrumAnalysis(3), + idleCompleteSpectrumAnalysis(4), + inProgressTimedSpectrumAnalysis(5), + inProgressContinuousSpectrumAnalysis(6), + notReady(7)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Start or stop timed or continuous Spectrum Analysis and also give status. + (0) - Stop Spectrum Analysis + (1) - Start Timed Spectrum Analysis + Note: AP/BHM will run Spectrum Analysis for the sector. + (2) - Start Continuous Spectrum Analysis + (3) - Idle, no Spectrum Analysis results. + (4) - Idle, Spectrum Analysis results available. + (5) - Timed or Remote Spectrum Analysis in progress. + (6) - Continuous Spectrum Analysis in progress. + Note: Continuous mode has a max of 24 hours. + (7) - Spectrum Analyzer not ready." + ::={whispBoxConfig 221} + + mac1VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 1 in MAC Address VID Mapping Table." + ::={whispBoxConfig 222} + + mac1VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 1 in MAC Address VID Mapping Table." + ::={whispBoxConfig 223} + + mac2VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 2 in MAC Address VID Mapping Table." + ::={whispBoxConfig 224} + + mac2VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 2 in MAC Address VID Mapping Table." + ::={whispBoxConfig 225} + + mac3VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 3 in MAC Address VID Mapping Table." + ::={whispBoxConfig 226} + + mac3VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 3 in MAC Address VID Mapping Table." + ::={whispBoxConfig 227} + + mac4VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 4 in MAC Address VID Mapping Table." + ::={whispBoxConfig 228} + + mac4VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 4 in MAC Address VID Mapping Table." + ::={whispBoxConfig 229} + + mac5VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 5 in MAC Address VID Mapping Table." + ::={whispBoxConfig 230} + + mac5VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 5 in MAC Address VID Mapping Table." + ::={whispBoxConfig 231} + + mac6VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 6 in MAC Address VID Mapping Table." + ::={whispBoxConfig 232} + + mac6VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 6 in MAC Address VID Mapping Table." + ::={whispBoxConfig 233} + + mac7VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 7 in MAC Address VID Mapping Table." + ::={whispBoxConfig 234} + + mac7VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 7 in MAC Address VID Mapping Table." + ::={whispBoxConfig 235} + + mac8VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 8 in MAC Address VID Mapping Table." + ::={whispBoxConfig 236} + + mac8VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 8 in MAC Address VID Mapping Table." + ::={whispBoxConfig 237} + + mac9VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 9 in MAC Address VID Mapping Table." + ::={whispBoxConfig 238} + + mac9VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 9 in MAC Address VID Mapping Table." + ::={whispBoxConfig 239} + + mac10VIDMapPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority for Entry 10 in MAC Address VID Mapping Table." + ::={whispBoxConfig 240} + + mac10VIDMapPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VID priority Mode for Entry 10 in MAC Address VID Mapping Table." + ::={whispBoxConfig 241} + + managementVIDPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "management VID VID VLAN Priority." + ::={whispBoxConfig 242} + + managementVIDPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "management VID VLAN Priority Mode." + ::={whispBoxConfig 243} + + remarkSrcVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Source VID to apply remarking on." + ::={whispBoxConfig 244} + + addRemarkVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Add VLAN ID re-marking entry." + ::={whispBoxConfig 245} + + addRemarkPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Add 802.1p re-mark entry." + ::={whispBoxConfig 246} + + deleteRemarkVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Remove the VID re-marking for this source VID." + ::={whispBoxConfig 247} + + deleteRemarkPriority OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Remove the priority re-marking for this source VID." + ::={whispBoxConfig 248} + + mimoRateAdaptAlgorithm OBJECT-TYPE + SYNTAX INTEGER { + mimobmimoa(0), + mimobonly(1), + mimoaonly(2), + siso(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Engineering use only. + Control MIMO Rate Adapt Algorithm + 0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput + 1 = MIMO-B only + 2 = MIMO-A only + 3 = SISO only" + ::={whispBoxConfig 249} + + controlMessages OBJECT-TYPE + SYNTAX INTEGER { + siso(1), + mimoa(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) + 0 = MIMO-A + 1 = SISO + MIMO Control Messages is the recommended and default setting. + However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. + Not applicable to PMP 450m." + ::={whispBoxConfig 250} + + enableSecurityBanner OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Shows Security Banner at the time of login" + ::={whispBoxConfig 251} + + vcDepth OBJECT-TYPE + SYNTAX INTEGER { + default(0), + eight(8), + sixteen(16), + thirty-two(32), + sixty-four(64), + one-two-eight(128)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VC Depth of radio. Not applicable with 450m. + Engineering use only." + ::={whispBoxConfig 252} + + textSecurityBanner OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Security Banner to be dispalyed on login page. + Length should be maximum 1200 characters.Configuration from web UI can enter upto 1499 characters. + Only ASCII characters(0-9a-zA-Z,CR,LF) supported." + ::={whispBoxConfig 253} + + acceptSecurityBanner OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "1: User must accept and acknowledge security banner before login. + 0: Accepting security banner is not mandatory and user can login without it." + ::={whispBoxConfig 254} + + poeT2Classification OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When disabled, the radio will ignore the 802.3at Type 2 classification. When enabled, + if 802.3at Type 2 PoE is not present, the board will start and log the problem but the + transmitter and PoE out will not be enabled due to the low input power. This is only + available on the 450i." + ::={whispBoxConfig 255} + + simulatedAirDelay OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Simulated Air Delay. Engineering use only." + ::={whispBoxConfig 256} + + cnMaestroEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable Remote management using cnMaestro." + ::={whispBoxConfig 257} + + cnMaestroUrl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "cnMaestro Server URL." + ::={whispBoxConfig 258} + + camID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Cambium Id for cnMaestro onboarding." + ::={whispBoxConfig 259} + + camOnboardKey OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Onboarding key for cnMaestro onboarding." + ::={whispBoxConfig 260} + + atexHazlocPowerLimit OBJECT-TYPE + SYNTAX INTEGER { + gasGroupA(0), + gasGroupB(1), + gasGroupC(2), + gasGroupD(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If radio is keyed for ATEX/HazLoc operation, these settings can + be used to limit maximum power output, per Gas Group specs." + ::={whispBoxConfig 261} + + nearFieldRange OBJECT-TYPE + SYNTAX INTEGER (6..3000) + UNITS "feet" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Range in feet for near field operation. This is applied + only when nearFieldOperation is set to enable(1) and + eirp is 22dBm or below or when Engineering keyed. + The maximum range of 3000ft applies negligible correction. + PMP 450m only." + ::={whispBoxConfig 262} + + nearFieldOperation OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables operation in the near field. This is + effective only when an EIRP of 22 dBm or lower + is selected or when Engineering keyed. + PMP 450m only." + ::={whispBoxConfig 263} + + defaultIPAccessEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable(1) or Disable(0) Default alternative LAN1 IP address" + ::={whispBoxConfig 264} + + pingWdogEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enable(1) or disable(0) ping watchdog." + ::={whispBoxConfig 265} + + pingWdogIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IPv4 address to ping in dotted decimal notation." + ::={whispBoxConfig 266} + + pingWdogInterval OBJECT-TYPE + SYNTAX INTEGER (300..86400) + UNITS "Seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Intervals in seconds at which ping should be initiated." + ::={whispBoxConfig 267} + + pingWdogRbtCnt OBJECT-TYPE + SYNTAX INTEGER (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Ping Failures count at which reboot should be initiated." + ::={whispBoxConfig 268} + + forceReassessment OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Forces channel reassessment for all registered SMs. + This is effective only when an EIRP of 22 dBm or lower + is selected or when Engineering keyed. + MU-MIMO only." + ::={whispBoxConfig 275} + + enable8023linkBox OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable 802.3 link." + ::={whispBoxConfig 276} + + ethernetPortSelection OBJECT-TYPE + SYNTAX INTEGER { + mainPort(0), + sfpPort(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set/Get the Ethernet port used to bridge traffic. PMP 450m only." + ::={whispBoxConfig 278} + + ethernetLinkSpeedSfp OBJECT-TYPE + SYNTAX INTEGER { + auto1000FX(32), + auto1000F-100F(40), + forced1000FX(64), + auto2500F-1000F-100F(168)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set/Get Ethernet link speed and duplex settings of the SFP port. PMP 450m only. Please note that the Radio Recovery Console only supports auto1000F for the SFP." + ::={whispBoxConfig 279} + +-- Box level control. + + saveFlash OBJECT-TYPE + SYNTAX INTEGER { + doNotSaveToFlash(0), + saveToFlash(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "This variable is currently deprecated." + ::={whispBoxControls 1} + + reboot OBJECT-TYPE + SYNTAX INTEGER { + finishedReboot(0), + reboot(1), + fullReboot(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to 1 will reboot the unit. When the + unit finishes rebooting, it will be in finishedReboot state. Setting + the variable to 2 will perform a full reboot of a 450i radio, while + performing a normal reboot on other radios." + ::={whispBoxControls 2} + + clearEventLog OBJECT-TYPE + SYNTAX INTEGER { + notClear(0), + clear(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to 1 will clear the event log." + ::={whispBoxControls 3} + + rebootIfRequired OBJECT-TYPE + SYNTAX INTEGER { + rebootNotRequired(0), + rebootRequired(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting the variable to 1 will reboot the unit if reboot is required." + ::={whispBoxControls 4} + + clearBERStats OBJECT-TYPE + SYNTAX INTEGER { + doNotClearBERStats(0), + clearBERStats(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' + When action is complete." + ::={whispBoxControls 5} + + updateDevice OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Use to update the software on the device" + ::={whispBoxControls 6} + + importConfigFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to URL to immediately download and apply configuration file" + ::={whispBoxControls 7} + + exportConfigFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to URL to immediately export and upload configuration file" + ::={whispBoxControls 8} + + undoUnitWideSavedChanges OBJECT-TYPE + SYNTAX INTEGER { + undoUnitWideSavedChanges(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting to 1 will undo unit wide saved changes" + ::={whispBoxControls 9} + + resetPoEAux OBJECT-TYPE + SYNTAX INTEGER { + reset(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting to 1 will reset aux ethernet port PoE on 450i radio. + Port will be powered off for 2 seconds during the set call, which will delay the SNMP response." + ::={whispBoxControls 10} + + whispBoxEvntLog OBJECT-TYPE + SYNTAX EventString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Event log for AP and SM." + ::={whispBoxEventLog 1} + + whispBoxAttributesGroup OBJECT-GROUP + OBJECTS { + vlanAcceptQinQFrames, + providerVID, + mac1VIDMapAddr, + mac1VIDMapVid, + mac1VIDMapPriority, + mac1VIDMapPriorityMode, + mac2VIDMapAddr, + mac2VIDMapVid, + mac2VIDMapPriority, + mac2VIDMapPriorityMode, + mac3VIDMapAddr, + mac3VIDMapVid, + mac3VIDMapPriority, + mac3VIDMapPriorityMode, + mac4VIDMapAddr, + mac4VIDMapVid, + mac4VIDMapPriority, + mac4VIDMapPriorityMode, + mac5VIDMapAddr, + mac5VIDMapVid, + mac5VIDMapPriority, + mac5VIDMapPriorityMode, + mac6VIDMapAddr, + mac6VIDMapVid, + mac6VIDMapPriority, + mac6VIDMapPriorityMode, + mac7VIDMapAddr, + mac7VIDMapVid, + mac7VIDMapPriority, + mac7VIDMapPriorityMode, + mac8VIDMapAddr, + mac8VIDMapVid, + mac8VIDMapPriority, + mac8VIDMapPriorityMode, + mac9VIDMapAddr, + mac9VIDMapVid, + mac9VIDMapPriority, + mac9VIDMapPriorityMode, + mac10VIDMapAddr, + mac10VIDMapVid, + mac10VIDMapPriority, + mac10VIDMapPriorityMode, + vlanPortType, + portVID, + timedSpectrumAnalysisDurationBox, + spectrumAnalysisActionBox, + calibrationStatusBox, + calibrationStatusBool, + catalinaGainRxCH1, + catalinaGainRxCH2, + catalinaAttenTxCH1, + catalinaAttenTxCH2, + catalinaCurrDetSetpointTxCH1, + catalinaCurrDetSetpointTxCH2, + catalinaCurrDetReadRefTxCH1, + catalinaCurrDetReadRefTxCH2, + catalinaCurrDetReadPowerOnTxCH1, + catalinaCurrDetReadPowerOnTxCH2, + catalinaOpenLoopAttenTxCH1, + catalinaOpenLoopAttenTxCH2, + catalinaTargetDetSetpointTxCH1, + catalinaTargetDetSetpointTxCH2, + catalinaGainReductionRxCH1, + catalinaGainReductionRxCH2, + catalinaLoAttenRxCH1, + catalinaLoAttenRxCH2, + catalinaTargetGainRxCH1, + catalinaTargetGainRxCH2, + whispBoxSoftwareVer, + whispBoxFPGAVer, + whispBoxEsn, + whispBoxBoot, + boxTemperature, + boxDeviceType, + boxDeviceTypeID, + boxEncryption, + etherLinkStatus, + boxFrequency, + platformVer, + platformType, + dhcpLanIp, + dhcpLanSubnetMask, + dhcpLanGateway, + dhcpRfPublicIp, + dhcpRfPublicSubnetMask, + dhcpRfPublicGateway, + lanDhcpStatus, + rfPublicDhcpStatus, + natDhcpStatus, + inSyncCount, + outSyncCount, + pllOutLockCount, + txCalFailure, + swVersion, + pldVersion, + platformInfo, + antType, + antPolarization, + whispBoxP11Personality, + whispBoxP11FPGAType, + whispBoxP11BstrapFPGAVer, + numDFSDetections, + numLBTDetections, + rxOverrunPkts, + boxTemperatureC, + boxTemperatureF, + linkNegoSpeed, + installationColorCode, + colorCode, + displayOnlyAccess, + fullAccess, + webAutoUpdate, + pass1Status, + pass2Status, + bridgeEntryTimeout, + cnMaestroEnable, + cnMaestroUrl, + camID, + camOnboardKey, + camAccID, + cnMaestroStatus, + daVersion, + snmpMibPerm, + bhTimingMode, + powerControl, + extFilterDelay, + antennaGain, + eirp, + dynamicLearning, + managementVID, + managementVIDPriority, + managementVIDPriorityMode, + agingTimeout, + remarkSrcVID, + addRemarkVID, + addRemarkPriority, + deleteRemarkVID, + deleteRemarkPriority, + frameType, + addVlanMember, + removeVlanMember, + scheduling, + transmitterOP, + bridgeEnable, + fecEnable, + trapIP1, + trapIP2, + trapIP3, + trapIP4, + trapIP5, + trapIP6, + trapIP7, + trapIP8, + trapIP9, + trapIP10, + commStringRWrite, + subnetMask, + mngtIP, + allowVIDAccess, + setDefaultPlug, + hwsCompatibility, + gpsInput, + ism, + hiPriority, + userName, + userPassword, + userAccessLevel, + userMode, + deleteUser, + twoXRate, + lanDhcpState, + dnsIpState, + sessionTimeout, + vlanMemberSource, + addCustomFreqList, + removeCustomFreqList, + allowColocation, + changeUsrPwd, + mngtIP2, + subnetMask2, + mngtIP3, + subnetMask3, + mngtIP4, + subnetMask4, + mngtIP5, + subnetMask5, + mngtIP6, + subnetMask6, + mngtIP7, + subnetMask7, + mngtIP8, + subnetMask8, + mngtIP9, + subnetMask9, + mngtIP10, + subnetMask10, + bhvlanEnable, + lldpBroadcastEnable, + radioRateAdapt, + boardModel, + productTypeName, + fpgaBuildDate, + fpgaCompileInfo, + syslogDomainNameAppend, + syslogServerAddr, + syslogServerPort, + syslogMinLevel, + pingWdogEnable, + pingWdogIP, + pingWdogInterval, + pingWdogRbtCnt, + syslogStatTxSuccesses, + syslogStatDropped, + apType, + apSmMode, + region, + regionCode, + regionAsia, + regionEurope, + regionNorthAmerica, + regionOceania, + regionSouthAmerica, + regionAfrica, + regionOtherRegulatory, + mimoRateAdaptAlgorithm, + radioRateAdaptUL, + tcpAckPriority, + dnsPrimaryMgmtIP, + dnsAlternateMgmtIP, + dnsMgmtDomainName, + auxPortEnable, + defaultIPAccessEnable, + poeAuxEnable, + addCustomFreqMimo, + removeCustomFreqMimo, + snmpv2cEnable, + nearFieldRange, + nearFieldOperation, + nearFieldOperationActive, + forceReassessment, + forceReassessmentActive, + ftpPort, + httpPort, + httpsPort, + snmpPort, + snmpTrapPort, + webAccess, + snmpStatus, + telnetStatus, + ftpStatus, + tftpStatus, + lan1DhcpRelease, + lan1DhcpRenew, + lan3DhcpRelease, + lan3DhcpRenew, + natDhcpRelease, + natDhcpRenew, + radioEngKeyed, + radioWatchDogLogged, + radioFatalErrorLogged, + codePointSelect, + prioritySelect, + priorityPrecedence, + pppoeCtlPriority, + rfStatXmtUDataCnt, + rfStatXmtBDataCnt, + rfStatXmtMDataCnt, + rfStatRcvUDataCnt, + rfStatRcvBDataCnt, + rfStatRcvMDataCnt, + rfStatXmtCntlCnt, + rfStatRcvCntlCnt, + rfStatInSyncCount, + rfStatOutSyncCount, + rfStatOverrunCount, + rfStatUnderrunCount, + rfStatRcvCorruptDataCount, + rfStatRcvCorruptControlCount, + rfStatBadBcastCtlCnt, + rfStatPLLOutOfLockCnt, + rfStatBeaconVerMismatchCnt, + rfStatBadFreqBcnRcvCnt, + rfStatnonLiteBcnRcvCnt, + rfStatUnsupFeatBcnRcvCnt, + rfStatUnkwnFeatBcnRcvCnt, + rfStatTxCalFailCnt, + rfStatBadInSyncIDRcv, + rfStatTempOutOfRange, + rfStatRSSIOutOfRange, + rfStatRangeCapEnf, + rfStatRcvLTStart, + rfStatRcvLTStartHS, + rfStatRcvLTResult, + rfStatXmtLTResult, + soundingStatClear, + soundingStatRequestCount, + soundingStatResponseCount, + soundingStatRequestsIgnored, + soundingStatAvgRequestInterval, + soundingStatMaxRequestInterval, + soundingStatErrorCount, + soundingStatRequestsDropped, + soundingStatResponsesSuppressed, + soundingStatVersionMismatch, + whispFeatureKeyOrigin, + poeT2Status, + updateStatus, + bridgeCbFecStatbin, + bridgeCbFecStatbout, + bridgeCbFecStatbtoss, + bridgeCbFecStatbtosscap, + bridgeCbFecStatuin, + bridgeCbFecStatuout, + bridgeCbFecStatutoss, + bridgeCbFecStatutosscap, + bridgeCbEthAuxStatbin, + bridgeCbEthAuxStatbout, + bridgeCbEthAuxStatbtoss, + bridgeCbEthAuxStatbtosscap, + bridgeCbEthAuxStatuin, + bridgeCbEthAuxStatuout, + bridgeCbEthAuxStatutoss, + bridgeCbEthAuxStatutosscap, + bridgeCbFecStatfloods, + bridgeCbEthAuxStatfloods, + bridgeCbRFStatfloods, + bridgeCbRFStatbin, + bridgeCbRFStatbout, + bridgeCbRFStatbtoss, + bridgeCbRFStatbtosscap, + bridgeCbRFStatuin, + bridgeCbRFStatuout, + bridgeCbRFStatutoss, + bridgeCbRFStatutosscap, + bridgeCbErrStatNI1QSend, + bridgeCbErrStatNI2QSend, + bridgeCbErrStatBridgeFull, + bridgeCbErrStatSendMsg, + bridgeCbErrStatAPFecQSend, + bridgeCbErrStatApRfQSend, + fecStatLinkDetected, + fecStatLinkUptime, + fecStatLinkLost, + fecStatUnderSizedToss, + fecInDiscardsCount, + fecInErrorsCount, + fecOutDiscardsCount, + fecOutErrorsCount, + fecRxBabErr, + fecTxHbErr, + fecEthBusErr, + fecCRCError, + fecRxFifoNoBuf, + fecRxOverrun, + fecLateCollision, + fecRetransLimitExp, + fecTxUnderrun, + fecCarSenseLost, + fecNoCarrier, + fecLargeFrame, + fecRuntFrame, + fecExcessiveDeferrals, + fecAuxStatLinkDetected, + fecAuxStatLinkUptime, + fecAuxStatLinkLost, + fecAuxInDiscardsCount, + fecAuxInErrorsCount, + fecAuxOutDiscardsCount, + fecAuxOutErrorsCount, + fecAuxCRCError, + fecAuxRxOverrun, + fecAuxLateCollision, + fecAuxRetransLimitExp, + fecAuxTxUnderrun, + fecAuxCarSenseLost, + fecAuxNoCarrier, + fecAuxLargeFrame, + fecAuxRuntFrame, + rfInDiscardsCountExt, + rfInErrorsCountExt, + rfOutDiscardsCountExt, + rfOutErrorsCountExt, + rfInDiscardsCount, + rfInErrorsCount, + rfOutDiscardsCount, + rfOutErrorsCount, + packetOverloadCounter, + fecInDiscardsOverloadCount, + fecOutDiscardsOverloadCount, + rfInDiscardsOverloadCount, + rfOutDiscardsOverloadCount, + framePeriodCurrent, + hardwareVersion, + radioStatusTransmitControlOverridden, + radioStatusTrackingFailure, + radioStatusSectorWeightsOff, + radioStatusRxBeamFormingOff, + radioStatusPowerDetectorInactive, + radioStatusCatQuadCalFail, + radioStatusAlarmReason, + radioStatusAlarm, + atexHazlocPowerLimit, + interleave, + controlMessages, + radioMSN, + simulatedAirDelay, + latitude, + longitude, + height, + bandwidth, + dataScramblingMethod, + whispWebUserAccessMode, + whispUsrAuth, + usrAccountEnableAccounting, + allowRejectThenLocal, + pppoeFilter, + smbFilter, + ipv6smbFilter, + snmpFilter, + ipv6snmpFilter, + userP1Filter, + userP2Filter, + userP3Filter, + allOtherIpFilter, + allOtherIpv6Filter, + allIpv4Filter, + allIpv6Filter, + arpFilter, + allOthersFilter, + userDefinedPort1, + port1TCPFilter, + port1UDPFilter, + userDefinedPort2, + port2TCPFilter, + port2UDPFilter, + userDefinedPort3, + port3TCPFilter, + port3UDPFilter, + bootpcFilter, + ipv6bootpcFilter, + bootpsFilter, + ipv6bootpsFilter, + ip4MultFilter, + ipv6MultFilter, + packetFilterDirection, + encryptionConfig, + activeTxPowerStr, + activeTxPowerHdths} + STATUS current + DESCRIPTION + "Canopy Box Level Attributes group." + ::= {whispBoxGroups 1} + + whispBoxControlGroup OBJECT-GROUP + OBJECTS { + enable8023linkBox, + saveFlash, + reboot, + clearEventLog, + rebootIfRequired, + clearBERStats, + updateDevice, + undoUnitWideSavedChanges, + resetPoEAux, + siteInfoViewable, + largeVCQ, + snrCalculation, + receiveQualityDebug, + poeT2Classification, + vcDepth, + enableSecurityBanner, + textSecurityBanner, + acceptSecurityBanner, + importConfigFile, + exportConfigFile} + STATUS current + DESCRIPTION + "Canopy Box Level control group." + ::= {whispBoxGroups 2} + + whispBoxBTGroup OBJECT-GROUP + OBJECTS { + whispBridgeMacAddr, + whispBridgeDesLuid, + whispBridgeAge, + whispBridgeExt, + whispBridgeHash, + whispBridgeCAM} + STATUS current + DESCRIPTION + "Canopy Box Bridging Table group." + ::= {whispBoxGroups 3} + + whispBoxVLANTableGroup OBJECT-GROUP + OBJECTS { + whispVID, + whispVType, + whispVAge} + STATUS current + DESCRIPTION + "Canopy Box VLAN member Table group." + ::= {whispBoxGroups 4} + + whispBoxCPTableGroup OBJECT-GROUP + OBJECTS { + codePoint0, + codePoint1, + codePoint2, + codePoint3, + codePoint4, + codePoint5, + codePoint6, + codePoint7, + codePoint8, + codePoint9, + codePoint10, + codePoint11, + codePoint12, + codePoint13, + codePoint14, + codePoint15, + codePoint16, + codePoint17, + codePoint18, + codePoint19, + codePoint20, + codePoint21, + codePoint22, + codePoint23, + codePoint24, + codePoint25, + codePoint26, + codePoint27, + codePoint28, + codePoint29, + codePoint30, + codePoint31, + codePoint32, + codePoint33, + codePoint34, + codePoint35, + codePoint36, + codePoint37, + codePoint38, + codePoint39, + codePoint40, + codePoint41, + codePoint42, + codePoint43, + codePoint44, + codePoint45, + codePoint46, + codePoint47, + codePoint48, + codePoint49, + codePoint50, + codePoint51, + codePoint52, + codePoint53, + codePoint54, + codePoint55, + codePoint56, + codePoint57, + codePoint58, + codePoint59, + codePoint60, + codePoint61, + codePoint62, + codePoint63} + STATUS current + DESCRIPTION + "Code Point Table group." + ::= {whispBoxGroups 5} + + whispBoxUserTableGroup OBJECT-GROUP + OBJECTS { + entryIndex, + userLoginName, + userPswd, + accessLevel, + loginStatus, + loginMethod, + sessionTime} + STATUS current + DESCRIPTION + "Canopy Box User Information Table group." + ::= {whispBoxGroups 6} + + whispLayer2NeighborTableGroup OBJECT-GROUP + OBJECTS { + entryL2Index, + neighborMAC, + neighborIP, + neighborSiteName} + STATUS current + DESCRIPTION + "Canopy Box Layer 2 Neighbor information." + ::= {whispBoxGroups 7} + + whispBoxNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + boxLan1DHCPClientEvent, + boxPoEType2PowerNotPresent, + radioStatusAlarmEvent} + STATUS current + DESCRIPTION + "Canopy Box Notification Group." + ::= {whispBoxGroups 8} + + whispBoxVLANRemarkTableGroup OBJECT-GROUP + OBJECTS { + sourceVID, + remarkVIDState, + remarkVID, + remarkPriorityState, + remarkPriority} + STATUS current + DESCRIPTION + "Canopy Box VLAN Remarking Table group." + ::= {whispBoxGroups 9} + + whispBoxSNMPv3Group OBJECT-GROUP + OBJECTS { + snmpv3EngineId, + snmpv3SecLvl, + snmpv3AuthProt, + snmpv3PrivProt, + roUserName, + roAuthPassword, + roPrivPassword, + rwUserEnable, + rwUserName, + rwAuthPassword, + rwPrivPassword, + userName1, + user1Enable, + user1AuthPassword, + user1PrivPassword, + userGroup1, + userName2, + user2Enable, + user2AuthPassword, + user2PrivPassword, + user2Group, + userName3, + user3Enable, + user3AuthPassword, + user3PrivPassword, + user3Group, + snmpv3TrapEnable} + STATUS current + DESCRIPTION + "Canopy Box SNMPv3 Group." + ::= {whispBoxGroups 10} + + whispBoxLinkTestGroup OBJECT-GROUP + OBJECTS { + linkTestLUIDBox, + linkTestDurationBox, + linkTestActionBox, + linkTestPktLengthBox, + linkTestModeBox, + linkTestSNRCalculationBox, + linkTestWithDualPathBox, + linkTestNumPktBox, + linkTestForceModulationBox, + linkTestDirectionBox, + testLUIDBox, + linkTestStatusBox, + linkTestErrorBox, + testDurationBox, + downLinkRateBox, + upLinkRateBox, + downLinkRateExtrapolatedBox, + upLinkRateExtrapolatedBox, + downLinkEffBox, + maxDwnLinkIndexBox, + actDwnLinkIndexBox, + expDwnFragCountBox, + actDwnFragCountBox, + upLinkEffBox, + expUpFragCountBox, + actUpFragCountBox, + maxUpLinkIndexBox, + actUpLinkIndexBox, + fragments1xDwnLinkVerticalBox, + fragments2xDwnLinkVerticalBox, + fragments3xDwnLinkVerticalBox, + fragments4xDwnLinkVerticalBox, + fragments1xUpLinkVerticalBox, + fragments2xUpLinkVerticalBox, + fragments3xUpLinkVerticalBox, + fragments4xUpLinkVerticalBox, + fragments1xDwnLinkHorizontalBox, + fragments2xDwnLinkHorizontalBox, + fragments3xDwnLinkHorizontalBox, + fragments4xDwnLinkHorizontalBox, + fragments1xUpLinkHorizontalBox, + fragments2xUpLinkHorizontalBox, + fragments3xUpLinkHorizontalBox, + fragments4xUpLinkHorizontalBox, + bitErrorsCorrected1xDwnLinkVerticalBox, + bitErrorsCorrected2xDwnLinkVerticalBox, + bitErrorsCorrected3xDwnLinkVerticalBox, + bitErrorsCorrected4xDwnLinkVerticalBox, + bitErrorsCorrected1xUpLinkVerticalBox, + bitErrorsCorrected2xUpLinkVerticalBox, + bitErrorsCorrected3xUpLinkVerticalBox, + bitErrorsCorrected4xUpLinkVerticalBox, + signalToNoiseRatioDownLinkVerticalBox, + signalToNoiseRatioUpLinkVerticalBox, + bitErrorsCorrected1xDwnLinkHorizontalBox, + bitErrorsCorrected2xDwnLinkHorizontalBox, + bitErrorsCorrected3xDwnLinkHorizontalBox, + bitErrorsCorrected4xDwnLinkHorizontalBox, + bitErrorsCorrected1xUpLinkHorizontalBox, + bitErrorsCorrected2xUpLinkHorizontalBox, + bitErrorsCorrected3xUpLinkHorizontalBox, + bitErrorsCorrected4xUpLinkHorizontalBox, + signalToNoiseRatioDownLinkHorizontalBox, + signalToNoiseRatioUpLinkHorizontalBox, + linkTestLastRunTime, + linkTestMissedFragDwnLink, + linkTestMissedFragUpLink, + linkTestNumPktTxActCnt, + linkTestNumPktTxExpCnt, + linkTestNumPktRxActCnt, + linkTestNumPktRxExpCnt, + linkTestMVCVC, + linkTestMVCPriority, + linkTestMVCXmtFragsDL, + linkTestMVCRcvFragsDL, + linkTestMVCThroughputDL, + linkTestMVCEfficiencyDL, + linkTestMVCSumimoModRateDL, + linkTestMVCSumimoXmtModeDL, + linkTestMVCMumimoModRateDL, + linkTestMVCMumimoXmtModeDL, + linkTestMVCGroupingRatioDL, + linkTestMVCXmtFragsTotalDL, + linkTestMVCRcvFragsTotalDL, + linkTestMVCThroughputTotalDL, + linkTestMVCThroughputTotalUntestedVCsDL, + linkTestMVCEfficiencyTotalDL, + linkTestMVCSlotDistributionDL, + linkTestFloodModeBox, + linkTestMumimoBox, + linkTestVCListBox, + linkTestSMRestriction} + STATUS current + DESCRIPTION + "Canopy Box Link Test group." + ::= {whispBoxGroups 11} + + whispBridgeTbUsed OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of used entries in bridging table." + ::={whispBoxBridgeVar 1} + + whispBridgeTbFree OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of free entries in bridging table." + ::={whispBoxBridgeVar 2} + + whispBridgeTbErr OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bridging table errors." + ::={whispBoxBridgeVar 3} + + codePoint0 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Code Point 0." + ::={whispBoxCPVar 1} + + codePoint1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 1." + ::={whispBoxCPVar 2} + + codePoint2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 2." + ::={whispBoxCPVar 3} + + codePoint3 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 3." + ::={whispBoxCPVar 4} + + codePoint4 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 4." + ::={whispBoxCPVar 5} + + codePoint5 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 5." + ::={whispBoxCPVar 6} + + codePoint6 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 6." + ::={whispBoxCPVar 7} + + codePoint7 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 7." + ::={whispBoxCPVar 8} + + codePoint8 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 8." + ::={whispBoxCPVar 9} + + codePoint9 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 9." + ::={whispBoxCPVar 10} + + codePoint10 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 10." + ::={whispBoxCPVar 11} + + codePoint11 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 11." + ::={whispBoxCPVar 12} + + codePoint12 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 12." + ::={whispBoxCPVar 13} + + codePoint13 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 13." + ::={whispBoxCPVar 14} + + codePoint14 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 14." + ::={whispBoxCPVar 15} + + codePoint15 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 15." + ::={whispBoxCPVar 16} + + codePoint16 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 16." + ::={whispBoxCPVar 17} + + codePoint17 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 17." + ::={whispBoxCPVar 18} + + codePoint18 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 18." + ::={whispBoxCPVar 19} + + codePoint19 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 19." + ::={whispBoxCPVar 20} + + codePoint20 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 20." + ::={whispBoxCPVar 21} + + codePoint21 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 21." + ::={whispBoxCPVar 22} + + codePoint22 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 22." + ::={whispBoxCPVar 23} + + codePoint23 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 23." + ::={whispBoxCPVar 24} + + codePoint24 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 24." + ::={whispBoxCPVar 25} + + codePoint25 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 25." + ::={whispBoxCPVar 26} + + codePoint26 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 26." + ::={whispBoxCPVar 27} + + codePoint27 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 27." + ::={whispBoxCPVar 28} + + codePoint28 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 28." + ::={whispBoxCPVar 29} + + codePoint29 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 29." + ::={whispBoxCPVar 30} + + codePoint30 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 30." + ::={whispBoxCPVar 31} + + codePoint31 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 31." + ::={whispBoxCPVar 32} + + codePoint32 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 32." + ::={whispBoxCPVar 33} + + codePoint33 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 33." + ::={whispBoxCPVar 34} + + codePoint34 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 34." + ::={whispBoxCPVar 35} + + codePoint35 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 35." + ::={whispBoxCPVar 36} + + codePoint36 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 36." + ::={whispBoxCPVar 37} + + codePoint37 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 37." + ::={whispBoxCPVar 38} + + codePoint38 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 38." + ::={whispBoxCPVar 39} + + codePoint39 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 39." + ::={whispBoxCPVar 40} + + codePoint40 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 40." + ::={whispBoxCPVar 41} + + codePoint41 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 41." + ::={whispBoxCPVar 42} + + codePoint42 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 42." + ::={whispBoxCPVar 43} + + codePoint43 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 43." + ::={whispBoxCPVar 44} + + codePoint44 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 44." + ::={whispBoxCPVar 45} + + codePoint45 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 45." + ::={whispBoxCPVar 46} + + codePoint46 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 46." + ::={whispBoxCPVar 47} + + codePoint47 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 47." + ::={whispBoxCPVar 48} + + codePoint48 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Code Point 48." + ::={whispBoxCPVar 49} + + codePoint49 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 49." + ::={whispBoxCPVar 50} + + codePoint50 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 50." + ::={whispBoxCPVar 51} + + codePoint51 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 51." + ::={whispBoxCPVar 52} + + codePoint52 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 52." + ::={whispBoxCPVar 53} + + codePoint53 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 53." + ::={whispBoxCPVar 54} + + codePoint54 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 54." + ::={whispBoxCPVar 55} + + codePoint55 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 55." + ::={whispBoxCPVar 56} + + codePoint56 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Code Point 56." + ::={whispBoxCPVar 57} + + codePoint57 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 57." + ::={whispBoxCPVar 58} + + codePoint58 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 58." + ::={whispBoxCPVar 59} + + codePoint59 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 59." + ::={whispBoxCPVar 60} + + codePoint60 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 60." + ::={whispBoxCPVar 61} + + codePoint61 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 61." + ::={whispBoxCPVar 62} + + codePoint62 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 62." + ::={whispBoxCPVar 63} + + codePoint63 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Code Point 63." + ::={whispBoxCPVar 64} + +-- Lan1 DHCP Client Event on AP or SM (with NAT disabled) + + boxLan1DHCPClientEvent NOTIFICATION-TYPE + OBJECTS { + dhcpLanIp, + whispBoxEsn} + STATUS current + DESCRIPTION + "Lan1 DHCP Client has received a new address via DHCP" + ::={whispBoxDHCPClientEvent 1} + +-- Transmit disabled due to PoE 802.3at Type 2 not present and not being ignored. + + boxPoEType2PowerNotPresent NOTIFICATION-TYPE + OBJECTS { + whispBoxEsn} + STATUS current + DESCRIPTION + "802.3at Type 2 PoE not present, transmit and PoE out disabled" + ::={whispBoxPoEEvent 1} + +-- Radio Status Alarm. + + radioStatusAlarmEvent NOTIFICATION-TYPE + OBJECTS { + radioStatusAlarmReason, + whispBoxEsn} + STATUS current + DESCRIPTION + "Radio Alarm Event notification." + ::={whispBoxRadioAlarmEvent 1} + + dnsIpState OBJECT-TYPE + SYNTAX INTEGER { + manual(0), + automatic(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configuration for DNS server IP addresses of the management interface are learned: + 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP + 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface" + ::={whispBoxDNS 1} + + dnsPrimaryMgmtIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Primary DNS IP address for the management interface." + ::={whispBoxDNS 2} + + dnsAlternateMgmtIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Secondary DNS IP address for the management interface." + ::={whispBoxDNS 3} + + dnsMgmtDomainName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Domain Name to use for management DNS configuration. This domain name may + be concatonated to DNS names used configured for the management interface." + ::={whispBoxDNS 4} + + trapDomainNameAppend OBJECT-TYPE + SYNTAX INTEGER { + disableDomain(0), + appendDomain(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select whether to append the configured management domain name to + the configured trap names. For example, if dnsMgmtDomainName is + set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend + is set to appendDomain, the trap1 name used would be 'trap1.example.com'." + ::={whispBoxDNS 5} + + trap1 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 1. + Format is either an IP address or DNS name." + ::={whispBoxDNS 6} + + trap2 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 2. + Format is either an IP address or DNS name." + ::={whispBoxDNS 7} + + trap3 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 3. + Format is either an IP address or DNS name." + ::={whispBoxDNS 8} + + trap4 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 4. + Format is either an IP address or DNS name." + ::={whispBoxDNS 9} + + trap5 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 5. + Format is either an IP address or DNS name." + ::={whispBoxDNS 10} + + trap6 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 6. + Format is either an IP address or DNS name." + ::={whispBoxDNS 11} + + trap7 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 7. + Format is either an IP address or DNS name." + ::={whispBoxDNS 12} + + trap8 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 8. + Format is either an IP address or DNS name." + ::={whispBoxDNS 13} + + trap9 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 9. + Format is either an IP address or DNS name." + ::={whispBoxDNS 14} + + trap10 OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMP Trap IP Address 10. + Format is either an IP address or DNS name." + ::={whispBoxDNS 15} + + snmpv2cEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable(1) or Disable(0) SNMPv2c access" + ::={whispBoxSNMPv3 1} + + snmpv3EngineId OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (10..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMPv3 engine administratively-unique identifier. Length of the identifier should be 5-32 octets which is 10-64 hexadecimal characters and even." + ::={whispBoxSNMPv3 2} + + snmpv3SecLvl OBJECT-TYPE + SYNTAX INTEGER { + noAuth-noPriv(0), + auth-noPriv(1), + auth-priv(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The security level of the SNMPv3 Engine." + ::={whispBoxSNMPv3 3} + + snmpv3AuthProt OBJECT-TYPE + SYNTAX INTEGER { + md5(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMPv3 message authentication protocol to use. + Currently only MD5 is supported." + ::={whispBoxSNMPv3 4} + + snmpv3PrivProt OBJECT-TYPE + SYNTAX INTEGER { + cbc-des(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMPv3 message privacy/encryption protocol to use. + Currently only CBC-DES is supported." + ::={whispBoxSNMPv3 5} + + roUserName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Only username." + ::={whispBoxSNMPv3 6} + + roAuthPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Only message authentication password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 7} + + roPrivPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Only message privacy/encryption password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 8} + + rwUserEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write User Enable." + ::={whispBoxSNMPv3 9} + + rwUserName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write Username." + ::={whispBoxSNMPv3 10} + + rwAuthPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 11} + + rwPrivPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 12} + + snmpv3TrapEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + roUserTrapEnable(1), + rwUserTrapEnable(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Trap enable option: + (0) Disable - No SNMPv3 Traps Sent + (1) Enable Traps to be sent for SNMPv3 Read-Only User + (2) Enable Traps to be sent for SNMPv3 Read-Write User + NOTE: When disabled SNMPv2c Trap configuration is used." + ::={whispBoxSNMPv3 13} + + user1Enable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Additional User1 Enable." + ::={whispBoxSNMPv3 14} + + userName1 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Additional SNMPv3 Username1." + ::={whispBoxSNMPv3 15} + + user1AuthPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 16} + + user1PrivPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 17} + + userGroup1 OBJECT-TYPE + SYNTAX INTEGER { + readwrite(1), + readonly(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 User1 Group (ReadWrite/ReadOnly)." + ::={whispBoxSNMPv3 18} + + userName2 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Additional SNMPv3 Username2." + ::={whispBoxSNMPv3 19} + + user2Enable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Additional User2 Enable." + ::={whispBoxSNMPv3 20} + + user2AuthPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 21} + + user2PrivPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 22} + + user2Group OBJECT-TYPE + SYNTAX INTEGER { + readwrite(1), + readonly(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 User1 Group (ReadWrite/ReadOnly)." + ::={whispBoxSNMPv3 23} + + userName3 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Additional SNMPv3 Username1." + ::={whispBoxSNMPv3 24} + + user3Enable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Additional User3 Enable." + ::={whispBoxSNMPv3 25} + + user3AuthPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 26} + + user3PrivPassword OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." + ::={whispBoxSNMPv3 27} + + user3Group OBJECT-TYPE + SYNTAX INTEGER { + readwrite(1), + readonly(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SNMPv3 User3 Group (ReadWrite/ReadOnly)." + ::={whispBoxSNMPv3 28} + + whispRegStatusBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "This shows the registration status of a link." + ::={whispBoxLink 4} + +-- Link test configuration + + linkTestLUIDBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "LUID selection for Link Test. Valid range: 2-255. Read-Only for SM or Backhaul slave, Read/Write for AP." + ::={whispBoxLinkTestConfig 1} + + linkTestDurationBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Duration for the Link Test. Valid range: 2-10 seconds" + ::={whispBoxLinkTestConfig 2} + +-- Link test action + + linkTestActionBox OBJECT-TYPE + SYNTAX INTEGER { + stopped(0), + start(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. + In fact it will return an error message. The value of 0 just indicates the idle state + meaning no test is running or the current test is done. + That's why the word stopped is used and not the action verb stop." + ::={whispBoxLinkTestConfig 3} + + linkTestPktLengthBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Packet length for Link Test. Valid range: 64-1714 bytes" + ::={whispBoxLinkTestConfig 4} + + linkTestModeBox OBJECT-TYPE + SYNTAX INTEGER { + linktestwithmultipleVCs(4), + linktestwithoutbridging(0), + linktestwithbridging(1), + linktestwithbridgingandmir(2), + extrapolatedlinktest(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Link Test Mode + 0 = Link Test without Bridging + 1 = Link Test with Bridging + 2 = Link Test with Bridging and MIR + 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) + This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. + It intended to provide a basic link test test without impacting service for the sector. + Extrapolated Link Test is not available for FSK radios. + 4 = Link Test with Multiple VCs (traffic sent to all registered VCs, or specified VCs) - PMP 450m only" + ::={whispBoxLinkTestConfig 5} + + linkTestSNRCalculationBox OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. + Enabling(1) will calulate SNR on all receiving packets. + Due to load on CPU, will slightly degrade packet per second capabilities. + Only applicable to GenII OFDM products and up." + ::={whispBoxLinkTestConfig 6} + + linkTestWithDualPathBox OBJECT-TYPE + SYNTAX INTEGER { + lowpriorityvconly(0), + highandlowpriorityvcs(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Link Test with: + 0 = Low Priority VC only + 1 = High and Low Priority VCs" + ::={whispBoxLinkTestConfig 7} + +-- Link test configuration + + linkTestNumPktBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of packets to send. Valid range: 0-64 where 0 will + flood the link for the duration of the test." + ::={whispBoxLinkTestConfig 8} + + linkTestForceModulationBox OBJECT-TYPE + SYNTAX INTEGER { + normalRateAdapt(0), + forceMaxModulation(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Engineering use only. + Link Test with: + 0 = Normal Rate Adapt algorithm + 1 = Force to max modultion - No Rate Adapt Algorithm" + ::={whispBoxLinkTestConfig 9} + + linkTestDirectionBox OBJECT-TYPE + SYNTAX INTEGER { + bidirectional(0), + uplinkonly(1), + downlinkonly(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Link Test Direction - Engineering Use Only + 0 = default (will do bidirectional) + 1 = Uplink Only + 2 = Downlink Only + 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0)" + ::={whispBoxLinkTestConfig 10} + + linkTestFloodModeBox OBJECT-TYPE + SYNTAX INTEGER { + external(0), + internal(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "PMP 450m only. Engineering use only. + Link Test usage: + 0 = Packets will be sent out the SM ethernet port + 1 = Packets will not be sent out the SM ethernet port" + ::={whispBoxLinkTestConfig 11} + + linkTestMumimoBox OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "PMP 450m only. + Link Test usage: + 0 = MU-MIMO disabled (legacy or sector mode) + 1 = MU-MIMO enabled" + ::={whispBoxLinkTestConfig 12} + + linkTestVCListBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "PMP 450m only. + Link Test usage: + Enter VCs to be tested (eg. 18 - 22,24,32) + Empty field or 0 will flood all registered VCs for duration of test" + ::={whispBoxLinkTestConfig 13} + + linkTestSMRestriction OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control access to SM initiated Link Tests. + Disabling will permit all Link Tests initiated at the SM. + Enabling will only permit Link Tests that allow user traffic to pass. + PMP only." + ::={whispBoxLinkTestConfig 14} + +-- Link test results + + testLUIDBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "LUID number of selected unit." + ::={whispBoxLinkTestResult 1} + + linkTestStatusBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status for Link Test." + ::={whispBoxLinkTestResult 2} + + linkTestErrorBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Error status of Link Test: + (1) Failed to recieve handshake from remote device + (2) No session is currently active. Please try again after session established. + (3) Received a bad transaction ID. Please try again. + (4) We werent able to send the test request to the remote device. + (5) We didnt receive any results from the remote device." + ::={whispBoxLinkTestResult 3} + + testDurationBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Duration of link test." + ::={whispBoxLinkTestResult 4} + + downLinkRateBox OBJECT-TYPE + SYNTAX INTEGER + UNITS "bps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Rate." + ::={whispBoxLinkTestResult 5} + + upLinkRateBox OBJECT-TYPE + SYNTAX INTEGER + UNITS "bps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uplink Rate." + ::={whispBoxLinkTestResult 6} + + downLinkEffBox OBJECT-TYPE + SYNTAX INTEGER + UNITS "%" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Down Link Efficiency." + ::={whispBoxLinkTestResult 7} + + maxDwnLinkIndexBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For link test results, the maximum possible downlink efficiency percentage (always 100%)." + ::={whispBoxLinkTestResult 8} + + actDwnLinkIndexBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Actual down link index." + ::={whispBoxLinkTestResult 9} + + expDwnFragCountBox OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Expected Fragment Count." + ::={whispBoxLinkTestResult 10} + + actDwnFragCountBox OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Actual Fragment Count" + ::={whispBoxLinkTestResult 11} + + upLinkEffBox OBJECT-TYPE + SYNTAX INTEGER + UNITS "%" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Up link efficiency." + ::={whispBoxLinkTestResult 12} + + expUpFragCountBox OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uplink expected Fragment Count." + ::={whispBoxLinkTestResult 13} + + actUpFragCountBox OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Actual uplink Fragment Count." + ::={whispBoxLinkTestResult 14} + + maxUpLinkIndexBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For link test results, the maximum possible uplink efficiency percentage (always 100%)." + ::={whispBoxLinkTestResult 15} + + actUpLinkIndexBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Actual Up link index." + ::={whispBoxLinkTestResult 16} + + fragments1xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 1X (QPSK). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 17} + + fragments2xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 2X (16-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 18} + + fragments3xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 3X (64-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 19} + + fragments4xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 4X (256-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 20} + + fragments1xUpLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 1X (QPSK). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 21} + + fragments2xUpLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 2X (16-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 22} + + fragments3xUpLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 3X (64-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 23} + + fragments4xUpLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 4X (256-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 24} + + bitErrorsCorrected1xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 1X (QPSK). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 25} + + bitErrorsCorrected2xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 26} + + bitErrorsCorrected3xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 27} + + bitErrorsCorrected4xDwnLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 28} + + bitErrorsCorrected1xUpLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 1X (QPSK). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 29} + + bitErrorsCorrected2xUpLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 30} + + bitErrorsCorrected3xUpLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 31} + + bitErrorsCorrected4xUpLinkVerticalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 32} + + signalToNoiseRatioDownLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated Signal to Noise Ratio in dB for the down link. + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 33} + + signalToNoiseRatioUpLinkVerticalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated Signal to Noise Ratio in dB for the up link. + For Gen II OFDM and forward. + For MIMO this is the vertical path." + ::={whispBoxLinkTestResult 34} + + fragments1xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 1X (QPSK). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 35} + + fragments2xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 2X (16-QAM). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 36} + + fragments3xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 3X (64-QAM). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 37} + + fragments4xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on down link at 4X (256-QAM). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 38} + + fragments1xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 1X (QPSK). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 39} + + fragments2xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 2X (16-QAM). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 40} + + fragments3xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 3X (64-QAM). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 41} + + fragments4xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of fragments received on up link at 4X (256-QAM). + For MIMO only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 42} + + bitErrorsCorrected1xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 1X (QPSK). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 43} + + bitErrorsCorrected2xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 44} + + bitErrorsCorrected3xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 45} + + bitErrorsCorrected4xDwnLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 46} + + bitErrorsCorrected1xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 1X (QPSK). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 47} + + bitErrorsCorrected2xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 48} + + bitErrorsCorrected3xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 49} + + bitErrorsCorrected4xUpLinkHorizontalBox OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). + For MIMO and forward. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispBoxLinkTestResult 50} + + signalToNoiseRatioDownLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated Signal to Noise Ratio in dB for the down link. + For MIMO and forward. + For MIMO this is the horizontal path. + If operating in MIMO-A this will return 0." + ::={whispBoxLinkTestResult 51} + + signalToNoiseRatioUpLinkHorizontalBox OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated Signal to Noise Ratio in dB for the up link. + For Gen II OFDM and forward. + For MIMO this is the horizontal path. + If operating in MIMO-A this will return 0." + ::={whispBoxLinkTestResult 52} + + downLinkRateExtrapolatedBox OBJECT-TYPE + SYNTAX INTEGER + UNITS "bps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extrapolated Downlink Rate from an extrapolated link test. + Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. + This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. + It intended to provide a basic link test test without impacting service for the sector." + ::={whispBoxLinkTestResult 53} + + upLinkRateExtrapolatedBox OBJECT-TYPE + SYNTAX INTEGER + UNITS "bps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extrapolated Uplink Rate from an extrapolated link test. + Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. + This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. + It intended to provide a basic link test test without impacting service for the sector." + ::={whispBoxLinkTestResult 54} + + linkTestLastRunTime OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time and Date when last link test ran." + ::={whispBoxLinkTestResult 55} + + linkTestMissedFragDwnLink OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of missed fragments during link test in the downlink. + Only supported on 450 and 450i." + ::={whispBoxLinkTestResult 56} + + linkTestMissedFragUpLink OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of missed fragments during link test in the uplink. + Only supported on 450 and 450i." + ::={whispBoxLinkTestResult 57} + + linkTestNumPktTxActCnt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of actual packets transmitted during link test." + ::={whispBoxLinkTestResult 58} + + linkTestNumPktTxExpCnt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of expected packets to be transmitted during link test." + ::={whispBoxLinkTestResult 59} + + linkTestNumPktRxActCnt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of actual packets received during link test." + ::={whispBoxLinkTestResult 60} + + linkTestNumPktRxExpCnt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets expected to be received during link test." + ::={whispBoxLinkTestResult 61} + + linkTestMVCXmtFragsTotalDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total Downlink Fragments Transmitted" + ::={whispBoxLinkTestMVCResult 1} + + linkTestMVCRcvFragsTotalDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total Downlink Fragments Received" + ::={whispBoxLinkTestMVCResult 2} + + linkTestMVCThroughputTotalDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total Downlink Throughput for Tested VCs" + ::={whispBoxLinkTestMVCResult 3} + + linkTestMVCThroughputTotalUntestedVCsDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total Downlink Throughput for Untested VCs. + This is the amount of user traffic that was transmitted to VCs during the test that were not part of the Link Test." + ::={whispBoxLinkTestMVCResult 4} + + linkTestMVCEfficiencyTotalDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total Downlink Efficiency" + ::={whispBoxLinkTestMVCResult 5} + + linkTestMVCSlotDistributionDL OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Slot Distribution. + Average group size per slot per frame represented as a percentage. + 450m only." + ::={whispBoxLinkTestMVCResult 6} + + whispBoxLinkTestMVCTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispBoxLinkTestMVCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Link Test with Multiple VC results." + ::= {whispBoxLink 6} + + whispBoxLinkTestMVCEntry OBJECT-TYPE + SYNTAX WhispBoxLinkTestMVCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Link Test with Multiple VC results." + INDEX {linkTestMVCVC} + ::= {whispBoxLinkTestMVCTable 1} + + WhispBoxLinkTestMVCEntry ::= SEQUENCE{ + linkTestMVCVC INTEGER, + linkTestMVCPriority INTEGER, + linkTestMVCXmtFragsDL INTEGER, + linkTestMVCRcvFragsDL INTEGER, + linkTestMVCThroughputDL INTEGER, + linkTestMVCEfficiencyDL INTEGER, + linkTestMVCSumimoModRateDL INTEGER, + linkTestMVCSumimoXmtModeDL INTEGER, + linkTestMVCMumimoModRateDL INTEGER, + linkTestMVCMumimoXmtModeDL INTEGER, + linkTestMVCGroupingRatioDL INTEGER + } + + linkTestMVCVC OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VC" + ::={whispBoxLinkTestMVCEntry 1} + + linkTestMVCPriority OBJECT-TYPE + SYNTAX INTEGER { + low(0), + high(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VC Priority" + ::={whispBoxLinkTestMVCEntry 2} + + linkTestMVCXmtFragsDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Fragments Transmitted" + ::={whispBoxLinkTestMVCEntry 3} + + linkTestMVCRcvFragsDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Fragments Received" + ::={whispBoxLinkTestMVCEntry 4} + + linkTestMVCThroughputDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Throughput" + ::={whispBoxLinkTestMVCEntry 5} + + linkTestMVCEfficiencyDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Efficiency" + ::={whispBoxLinkTestMVCEntry 6} + + linkTestMVCSumimoModRateDL OBJECT-TYPE + SYNTAX INTEGER { + noSession(0), + rate1X(1), + rate2X(2), + rete3X(3), + rate4X(4), + rate6X(6), + rate8X(8)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink SU-MIMO Modulation Transmit Rate. + 0 : No session + 1 : 1X QPSK MIMO-A + 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B + 3 : 3X 64-QAM MIMO-A + 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B + 6 : 6X 64-QAM MIMO-B + 8 : 8X 256-QAM MIMO-B" + ::={whispBoxLinkTestMVCEntry 7} + + linkTestMVCSumimoXmtModeDL OBJECT-TYPE + SYNTAX INTEGER { + mimo-b(0), + mimo-a(1), + noSession(2)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink SU-MIMO Transmit Mode. + 0 : MIMO-B + 1 : MIMO-A + 2 : No session" + ::={whispBoxLinkTestMVCEntry 8} + + linkTestMVCMumimoModRateDL OBJECT-TYPE + SYNTAX INTEGER { + invalid(0), + rate1X(1), + rate2X(2), + rete3X(3), + rate4X(4), + rate6X(6), + rate8X(8)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink MU-MIMO Modulation Transmit Rate. + 450m only. + 0 : Invalid + 1 : 1X QPSK MIMO-A + 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B + 3 : 3X 64-QAM MIMO-A + 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B + 6 : 6X 64-QAM MIMO-B + 8 : 8X 256-QAM MIMO-B" + ::={whispBoxLinkTestMVCEntry 9} + + linkTestMVCMumimoXmtModeDL OBJECT-TYPE + SYNTAX INTEGER { + mimo-b(0), + mimo-a(1), + invalid(2)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink MU-MIMO Transmit Mode. + 450m only. + 0 : MIMO-B + 1 : MIMO-A + 2 : Invalid" + ::={whispBoxLinkTestMVCEntry 10} + + linkTestMVCGroupingRatioDL OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Downlink Grouping Ratio. + The percentage of time that a VC is grouped with other VCs to make a MU-MIMO group. + 450m only." + ::={whispBoxLinkTestMVCEntry 11} + + certTableUserAuth OBJECT-TYPE + SYNTAX SEQUENCE OF CertEntryUserAuth + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of CA Certificates for User Auth on radio." + ::= {whispUserAuthSecurity 1} + + certEntryUserAuth OBJECT-TYPE + SYNTAX CertEntryUserAuth + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of Certifcates." + INDEX {certIdx} + ::= {certTableUserAuth 1} + + CertEntryUserAuth ::= SEQUENCE{ + certIdx INTEGER, + certStatus INTEGER, + certAction INTEGER, + certDN DisplayString + } + + certIdx OBJECT-TYPE + SYNTAX INTEGER (3..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User information table index." + ::={certEntryUserAuth 1} + + certStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(0), + active(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "0: Inactive 1: Active" + ::={certEntryUserAuth 2} + + certAction OBJECT-TYPE + SYNTAX INTEGER { + noop(0), + delete(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0: No Operation 1: Delete Certificate" + ::={certEntryUserAuth 3} + + certDN OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Distinguished Name of Certificate" + ::={certEntryUserAuth 4} + + whispBoxRFPhysicalRadios OBJECT-TYPE + SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio information table." + ::= {whispBoxRFPhysical 1} + + whispBoxRFPhysicalRadioEntry OBJECT-TYPE + SYNTAX WhispBoxRFPhysicalRadioEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio information table entry." + INDEX {radioIndex} + ::= {whispBoxRFPhysicalRadios 1} + + WhispBoxRFPhysicalRadioEntry ::= SEQUENCE{ + radioIndex INTEGER, + radioType INTEGER, + radioPaths INTEGER + } + + radioIndex OBJECT-TYPE + SYNTAX INTEGER (0..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio Index." + ::={whispBoxRFPhysicalRadioEntry 1} + + radioType OBJECT-TYPE + SYNTAX INTEGER { + fsk(0), + ofdm(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates if the radio is FSK or OFDM." + ::={whispBoxRFPhysicalRadioEntry 2} + + radioPaths OBJECT-TYPE + SYNTAX INTEGER (0..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1. + For MIMO, it can be greater (with a current maximum of 2)." + ::={whispBoxRFPhysicalRadioEntry 3} + + whispBoxRFPhysicalRadioPaths OBJECT-TYPE + SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioPathEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio path information table." + ::= {whispBoxRFPhysical 2} + + whispBoxRFPhysicalRadioPathEntry OBJECT-TYPE + SYNTAX WhispBoxRFPhysicalRadioPathEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio path table entry." + INDEX {radioIndex,pathIndex} + ::= {whispBoxRFPhysicalRadioPaths 1} + + WhispBoxRFPhysicalRadioPathEntry ::= SEQUENCE{ + pathIndex INTEGER + } + + pathIndex OBJECT-TYPE + SYNTAX INTEGER (0..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Path Index." + ::={whispBoxRFPhysicalRadioPathEntry 1} + + whispBoxRFPhysicalRadioFrequencies OBJECT-TYPE + SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioFrequencyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Available frequency information table." + ::= {whispBoxRFPhysical 3} + + whispBoxRFPhysicalRadioFrequencyEntry OBJECT-TYPE + SYNTAX WhispBoxRFPhysicalRadioFrequencyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Available frequency table entry." + INDEX {radioIndex,frequency} + ::= {whispBoxRFPhysicalRadioFrequencies 1} + + WhispBoxRFPhysicalRadioFrequencyEntry ::= SEQUENCE{ + frequency INTEGER + } + + frequency OBJECT-TYPE + SYNTAX INTEGER (0..9000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Frequency." + ::={whispBoxRFPhysicalRadioFrequencyEntry 1} + + whispBoxRFConfigRadios OBJECT-TYPE + SYNTAX SEQUENCE OF WhispBoxRFConfigRadioEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio configuration table." + ::= {whispBoxRFConfig 1} + + whispBoxRFConfigRadioEntry OBJECT-TYPE + SYNTAX WhispBoxRFConfigRadioEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Radio config table entry." + INDEX {radioConfigIndex} + ::= {whispBoxRFConfigRadios 1} + + WhispBoxRFConfigRadioEntry ::= SEQUENCE{ + radioConfigIndex INTEGER, + radioFrequencyBand INTEGER + } + + radioConfigIndex OBJECT-TYPE + SYNTAX INTEGER (0..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio Config Index." + ::={whispBoxRFConfigRadioEntry 1} + + radioFrequencyBand OBJECT-TYPE + SYNTAX INTEGER { + band700(0), + band900(1), + band2400(2), + band3500(3), + band3700(4), + band4900(5), + band5100(6), + band5200(7), + band5400(8), + band5700(9), + band5800(10), + band5900(11), + band6050(12), + band3600(13), + band4959(14), + band3(15)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Currently configured radio band. + Set is Engineering use only." + ::={whispBoxRFConfigRadioEntry 2} + + whispBoxBridgeTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispBoxBridgeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Bridge table." + ::= {whispBox 4} + + whispBoxBridgeEntry OBJECT-TYPE + SYNTAX WhispBoxBridgeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Bridge entry." + INDEX {whispBridgeMacAddr} + ::= {whispBoxBridgeTable 1} + + WhispBoxBridgeEntry ::= SEQUENCE{ + whispBridgeMacAddr MacAddress, + whispBridgeDesLuid WhispLUID, + whispBridgeAge INTEGER, + whispBridgeExt INTEGER, + whispBridgeHash INTEGER, + whispBridgeCAM INTEGER + } + + whispBridgeMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MAC Address of the registered entity." + ::={whispBoxBridgeEntry 1} + + whispBridgeDesLuid OBJECT-TYPE + SYNTAX WhispLUID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the Local Unit Identifier assigned to + Subscriber Modems." + ::={whispBoxBridgeEntry 2} + + whispBridgeAge OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Table entry last access age in minutes." + ::={whispBoxBridgeEntry 3} + + whispBridgeExt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Timeout extension flag for entries which also + reside in the PNA APR cache." + ::={whispBoxBridgeEntry 4} + + whispBridgeHash OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Hash table array index." + ::={whispBoxBridgeEntry 5} + + whispBridgeCAM OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "This entry is deprecated." + ::={whispBoxBridgeEntry 6} + + whispVLANTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispVLANEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "VLAN member table." + ::= {whispBox 8} + + whispVLANEntry OBJECT-TYPE + SYNTAX WhispVLANEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "VLAN entry." + INDEX {whispVID} + ::= {whispVLANTable 1} + + WhispVLANEntry ::= SEQUENCE{ + whispVID INTEGER, + whispVType DisplayString, + whispVAge INTEGER + } + + whispVID OBJECT-TYPE + SYNTAX INTEGER (1..4095) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN member ID." + ::={whispVLANEntry 1} + + whispVType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN member type." + ::={whispVLANEntry 2} + + whispVAge OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN member age." + ::={whispVLANEntry 3} + + whispVLANRemarkTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispVLANRemarkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Active VLAN Remarking table." + ::= {whispBox 17} + + whispVLANRemarkEntry OBJECT-TYPE + SYNTAX WhispVLANRemarkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Remarking VLAN entry." + INDEX {sourceVID} + ::= {whispVLANRemarkTable 1} + + WhispVLANRemarkEntry ::= SEQUENCE{ + sourceVID INTEGER, + remarkVIDState DisplayString, + remarkVID INTEGER, + remarkPriorityState DisplayString, + remarkPriority INTEGER + } + + sourceVID OBJECT-TYPE + SYNTAX INTEGER (1..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source VLAN ID." + ::={whispVLANRemarkEntry 1} + + remarkVIDState OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remark VID State." + ::={whispVLANRemarkEntry 2} + + remarkVID OBJECT-TYPE + SYNTAX INTEGER (0..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remark VID." + ::={whispVLANRemarkEntry 3} + + remarkPriorityState OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remark Priority State." + ::={whispVLANRemarkEntry 4} + + remarkPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remark Priority." + ::={whispVLANRemarkEntry 5} + + whispUserTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispUserEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "User information table." + ::= {whispBox 10} + + whispUserEntry OBJECT-TYPE + SYNTAX WhispUserEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "User entry." + INDEX {entryIndex} + ::= {whispUserTable 1} + + WhispUserEntry ::= SEQUENCE{ + entryIndex INTEGER, + userLoginName DisplayString, + userPswd DisplayString, + accessLevel INTEGER, + loginStatus INTEGER, + loginMethod INTEGER, + sessionTime INTEGER + } + + entryIndex OBJECT-TYPE + SYNTAX INTEGER (1..5) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User information table index." + ::={whispUserEntry 1} + + userLoginName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User name." + ::={whispUserEntry 2} + + userPswd OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User password." + ::={whispUserEntry 3} + + accessLevel OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User access level." + ::={whispUserEntry 4} + + loginStatus OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User current status." + ::={whispUserEntry 5} + + loginMethod OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User login method." + ::={whispUserEntry 6} + + sessionTime OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Users logged in session time." + ::={whispUserEntry 7} + + whispLayer2NeighborTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispLayer2NeighborEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Neighbor information table." + ::= {whispBox 11} + + whispLayer2NeighborEntry OBJECT-TYPE + SYNTAX WhispLayer2NeighborEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Neighbor Entry." + INDEX {entryL2Index} + ::= {whispLayer2NeighborTable 1} + + WhispLayer2NeighborEntry ::= SEQUENCE{ + entryL2Index INTEGER, + neighborMAC DisplayString, + neighborIP DisplayString, + neighborSiteName DisplayString + } + + entryL2Index OBJECT-TYPE + SYNTAX INTEGER (1..20) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Neighbor information table index." + ::={whispLayer2NeighborEntry 1} + + neighborMAC OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Neighbor MAC." + ::={whispLayer2NeighborEntry 2} + + neighborIP OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Neighbor IP." + ::={whispLayer2NeighborEntry 3} + + neighborSiteName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Neighbor Site Name." + ::={whispLayer2NeighborEntry 4} + + +END -- cgit v1.2.3