Initial commitHEADmain

24 files changed, 36246 insertions, 0 deletions

diff --git a/MIBS/arubaos/AI-AP-MIB b/MIBS/arubaos/AI-AP-MIB
new file mode 100644
index 0000000..880b7fd
--- /dev/null
+++ b/MIBS/arubaos/AI-AP-MIB
@@ -0,0 +1,5220 @@
+--- ArubaOS 8.8.0.1_80393
+   AI-AP-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION
+           FROM SNMPv2-TC
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Counter32,
+       Counter64,
+       IpAddress,
+       NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       DisplayString,
+       PhysAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+       MacAddress,
+       TruthValue,
+       DateAndTime
+       FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+                aiEnterpriseMibModules
+                        FROM ARUBA-MIB;
+
+   aiMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB is for managing Aruba Instant WLAN"
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { aiEnterpriseMibModules 1 }
+
+ArubaEnableValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents a Flag which is either Enabled or Disabled."
+    SYNTAX       INTEGER { enabled(1), disabled(2) }
+
+
+ArubaFrameType ::= TEXTUAL-CONVENTION
+   	STATUS       current
+   	DESCRIPTION
+           "Represents the Frame type."
+    SYNTAX       INTEGER {
+						associateRequest(0),
+						associateResponse(1),
+						reassociateRequest(2),
+						reassociateResponse(3),
+						probeRequest(4),
+						probeResponse(5),
+						beacon(8),
+						atim(9),
+						disassociate(10),
+						auth(11),
+						deauth(12)
+				 }
+
+ArubaPhyType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the PHY-type of the access point or client.  Wired clients will
+		  show 'wired' in user MIB entries.
+		"
+	SYNTAX       INTEGER {
+		 				dot11a(1),
+						dot11b(2),
+						dot11g(3),
+						dot11ag(4),
+						wired(5)
+					  }
+        
+ArubaHTMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the HT status of the access point or client.
+		"
+	SYNTAX       INTEGER {
+		 				none(1),
+						ht20(2),
+						ht40(3),
+                        vht20(4),
+                        vht40(5),
+                        vht80(6),
+                        vht160(7),
+                        vht80plus80(8),
+                        he20(9),
+                        he40(10),
+                        he80(11),
+                        he160(12),
+                        he80plus80(13)
+					  }
+        
+ArubaHTExtChannel ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the extension channel offset relative to the current channel."
+	SYNTAX       INTEGER {
+		 				none(1),
+						above(2),
+						below(3)
+					  }
+        
+ArubaMonEncryptionType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the encryption type supported by the access point."
+	SYNTAX       INTEGER {
+		 				open(0),
+						wep(1),
+						wpa(2),
+						wpa2(3),
+						wpa3(4)
+					  }
+
+ArubaMonEncryptionCipher ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the WPA encryption cipher supported by the access point."
+	SYNTAX       INTEGER {
+		 				none(0),
+						wep40(1),
+						wep104(2),
+						tkip(3),
+						aesccmp(4),
+						other(5),
+						gcm256(6)
+					  }
+
+ArubaMonAuthAlgorithm ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the WPA authentication algorithm supported by the access point."
+	SYNTAX       INTEGER {
+		 				none(0),
+						psk(1),
+						dot1x(2),
+						ft8021x(3),
+						ftpsk(4),
+						dot1x256(5),
+						psk256(6),
+						tdls(7),
+						sae(8),
+						ftsae(9),
+						other(10),
+						suiteb(11),
+						owe(12)
+					  }
+                      
+ArubaSwitchRole ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the role of the controller"
+	SYNTAX       INTEGER {
+		 				master(1),
+						local(2),
+						backupmaster(3)
+					  }
+          
+ArubaSupportStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents if a feature is supported or unsupported."
+	SYNTAX       INTEGER {
+		 				unsupported(1),
+						supported(2)
+					  }
+         
+ArubaActiveState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents if a feature is active or inactive."
+	SYNTAX       INTEGER {
+		 				active(1),
+						inactive(2)
+					  }
+          
+ArubaACLDomain ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents both the source and destination to which an ACL rule will
+		  be applied.
+		"
+	SYNTAX       INTEGER {
+		 				alias(1),
+						any(2),
+						user(3),
+						host(4),
+						network(5)
+					  }
+           
+ArubaACLNetworkServiceType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the network service in an ACL Rule."
+	SYNTAX       INTEGER {
+		 				alias(1),
+						any(2),
+						tcp(3),
+						udp(4),
+						protocol(5)
+					  }
+            
+ArubaACLAction ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+	SYNTAX       INTEGER {
+		 				deny(1),
+						permit(2),
+						srcNAT(3),
+						dstNAT(4),
+						redirect(5)
+					  }
+             
+ArubaDaysOfWeek ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+	SYNTAX       INTEGER {
+		 				sun(1),
+						mon(2),
+						tue(3),
+						wed(4),
+						thu(5),
+						fri(6),
+						sat(7)
+					  }
+              
+ArubaAuthenticationMethods ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Authentication Method."
+	SYNTAX       INTEGER {
+		 				none(0),
+		 				web(1),
+						mac(2),
+						vpn(3),
+						dot1x(4),
+						kerberos(5),
+						secureId(7),
+						pubcookie(15),
+						xSec(16),
+						xSecMachine(17),
+						via-vpn(28),
+						other(255)
+					  }
+     
+ArubaSubAuthenticationMethods ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Sub Authentication Method (e.g. EAP type)."
+	SYNTAX       INTEGER {
+		 				authPAP(1),
+						authCHAP(2),
+						authMSCHAP(3),
+						authMSCHAPv2(4),
+						eapTLS(5),
+						eapTTLS(6),
+						eapLEAP(7),
+						eapMD5(8),
+						eapPEAP(9)
+					  }
+
+ArubaEncryptionType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Encryption Method."
+	SYNTAX       INTEGER {
+		 				none(0),
+		 				static-wep(1),
+					    dynamic-wep(2),
+						wpa-psk-tkip(3),
+						wpa-tkip(4),
+						wpa-psk-aes(5),
+						wpa-aes(6),
+						wpa2-psk-tkip(7),
+						wpa2-tkip(8),
+						wpa2-psk-aes(9),
+						wpa2-aes(10),
+                        xSec(11),
+                        bSec-128(12),
+                        bSec-256(13),
+                        aes-128-cmac(14),
+                        unknown(15),
+                        ft-psk(16),
+                        ft-8021x(17),
+                        wpa3-cnsa(18),
+                        owe-aes(20),
+                        wpa3-sae-aes(21),
+                        wpa3-aes-gcmp-256(22)
+					  }
+     
+ArubaUserForwardMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" User Forwarding Mode."
+	SYNTAX       INTEGER {
+		 				tunnel-encrypted(0),
+                        bridge(1),
+		 				tunnel-decrypted(2),
+					    split-tunnel(3)
+					  }
+
+ArubaRogueApType ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the Rogue AP Type. "
+   SYNTAX      INTEGER {
+						valid(1),
+						interfering(2),
+						unsecure(3),
+		 				dos(4),
+						unknown(5),
+						knownInterfering(6),
+						suspectedUnsecure(7)
+					 }
+          
+ArubaAPMatchType ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the match type of a suspected rogue AP. "
+   SYNTAX      INTEGER {
+						unknown(0),
+						configuredWiredMac(1),
+						ethernetWiredMac(2),
+						apWiredMac(3),
+		 				externalWiredMac(4),
+						manual(5),
+						baseBSSIDOverride(6),
+						mms(7),
+						ethernetGatewayWiredMac(8),
+						classificationDisabled(9),
+						apBSSID(10),
+						propagatedEthernetWiredMac(11),
+						apRule(12),
+						systemWiredMac(13),
+						systemGatewayMac(14)
+					 }
+
+ArubaAPMatchMethod ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the match method of a suspected rogue AP. "
+   SYNTAX      INTEGER {
+						notApplicable(0),
+						exactMatch(1),
+						plusOneMatch(2),
+						minusOneMatch(3),
+						ouiMatch(4)
+					 }
+
+ArubaStationType ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the station type. "
+   SYNTAX      INTEGER {
+						valid(1),
+						interfering(2),
+		 				dos(3)
+					 }
+          
+ArubaEncryptionMethods ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+    SYNTAX      BITS{
+						disabled(0),
+						static-wep(1),
+						dynamic-wep(2),
+						static-wpa(3),
+						dynamic-wpa(4),
+						wpa2-psk-aes(5),
+						wpa2-8021x-aes(6),
+						wpa2PreAuth(7),
+						xsec(8),
+						wpa-psk-aes(9),
+						wpa-aes(10),
+						wpa2-psk-tkip(11),
+						wpa2-8021x-tkip(12),
+						bSec-128(13),
+						bSec-256(14),
+						owe-aes(16),
+						wpa3-sae-aes(17),
+						wpa3-cnsa(18),
+						wpa3-aes-ccm-128(19),
+						mpsk-aes(21),
+						wpa3-aes-gcm-256(22)
+						}
+
+ ArubaHashAlgorithms ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+	SYNTAX       INTEGER {
+		 				md5(1),
+						sha(2)
+					  }
+  
+ArubaVlanValidRange	::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the Valid Vlan Id Range."
+	SYNTAX		INTEGER(1..4095)
+  
+ArubaPortMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the controller port mode."
+	SYNTAX		INTEGER {
+					access(1),
+					dot1q(2)
+				}
+  
+ArubaDot1dState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the controller port spanning tree state."
+	SYNTAX		INTEGER {
+					disabled(1),
+					blocked(2),
+					listening(3),
+					learning(4),
+					forwarding(5)
+				}
+  
+ArubaPoeState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the POE mode."
+	SYNTAX		INTEGER {
+					disabled(1),
+					enabled(2),
+					enabledCisco(3),
+                                        notAvailable(4)
+				}
+ 
+ArubaCardType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Type of the hardware module.
+		"
+	SYNTAX		INTEGER {
+					lc1(1),
+					lc2(2),
+					sc1(3),
+					sc2(4),
+					sw2400(5),
+					sw800(6),
+					sw200(7),
+					m3mk1(8),
+					sw3200(9),
+					sw3400(10),
+					sw3600(11),
+					sw650(12),
+					sw651(13),
+					reserved1(14),
+					reserved2(15),
+					sw620(16)
+				}
+ 
+ArubaESIServerMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The mode of the ESI server.
+		"
+	SYNTAX		INTEGER {
+					bridged(1),
+					routed(2),
+					nat(3)
+				}
+ 
+ArubaESIServerStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The status of the ESI server.
+		"
+	SYNTAX		INTEGER {
+					up(1),
+					down(2)
+				}
+
+ArubaIfType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The type of interface referred to by the value of ifIndex.
+		"
+	SYNTAX		INTEGER {
+					port(1),
+					vlan(2),
+					tunnel(3),
+					loopback(4)
+				}
+
+ArubaVoipProtocolType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The type of VoIP protocols supported.
+		"
+	SYNTAX       INTEGER{
+		 				sccp(1),
+						svp(2),
+						vocera(3),
+						sip(4),
+						unknown(10)
+		 		 }
+
+ArubaAccessPointMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The mode of the access point.
+		"
+	SYNTAX       INTEGER{
+		 				airMonitor(1),
+						accessPoint(2),
+						accessPointAndMonitor(3),
+						meshPortal(4),
+						meshPoint(5),
+						rfprotectSensor(6),
+						spectrumSensor(7)
+		 		 }
+
+ArubaAuthServerType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The type of the auth server.
+		"
+         SYNTAX       INTEGER{
+		 				internaldb(1),
+						radius(2),
+						ldap(3),
+						kerberos(4),
+						tacacs(5)
+					  }
+
+ArubaAddressType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Address Type. 
+		"
+	SYNTAX       INTEGER{
+		 				srcAddress(1),
+						dstAddress(2),
+						bssid(3)
+		 		 }
+
+ArubaBlackListReason ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Black List Reason. 
+		"
+	SYNTAX       INTEGER {
+		 				userDefined(1),
+						mitmAttack(2),
+						authFailure(3),
+						pingFlood(4),
+						sessionFlood(5),
+						synFlood(6),
+						sessionBlacklist(7),
+						ipSpoofing(8),
+						esiBlacklist(9),
+						other(100)
+		 			  }
+
+ArubaDBType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		DataBase Type. 
+		"
+	SYNTAX       INTEGER {
+		 				mssql(1),
+						mysql(2)
+		 			  }
+
+
+ArubaVrrpState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		DataBase Type. 
+		"
+	SYNTAX       INTEGER {
+						initialize(1),
+						backup(2),
+		 				master(3)
+		 			  }
+
+
+ArubaOperStateValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents Operational state of an interface."
+    SYNTAX       INTEGER { up(1), down(2), testing(3) }
+
+
+
+ArubaAntennaSetting ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents the status of the external antenna."
+    SYNTAX       INTEGER { notPresent(1), enabled(2), disabled(3) }
+
+ArubaAPStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The status of the access point.
+		"
+	SYNTAX		INTEGER { up(1), down(2) }
+
+ArubaPortSpeed ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Port Speed.
+		"
+	SYNTAX		INTEGER { speed10Mbps(1), 
+						  speed100Mbps(2), 
+						  speed1000Mbps(3), 
+						  speedAuto(4),
+						  speed10Gbps(5)
+						}
+
+ArubaPortDuplex ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Port Duplexity.
+		"
+	SYNTAX		INTEGER { half(1), 
+						  full(2), 
+						  auto(3)
+						}
+
+ArubaPortType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Port Type.
+		"
+	SYNTAX		INTEGER { fastethernet(1), 
+						  gigabitethernet(2),
+						  xgigabitethernet(3) 
+						}
+
+ArubaEnet1Mode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Mode of the Ethernet port on the Access Point"
+	SYNTAX       INTEGER {
+		 				activeStandby(1),
+						tunnel(2),
+						bridge(3),
+						notApplicable(4),
+						split(5)
+					  }
+ 
+ArubaUnprovisionedStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents whether the AP is provisioned or not."
+	SYNTAX       INTEGER {
+		 				yes(1),
+						no(2)
+					  }
+ 
+ArubaMonitorMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents whether the AP has any radios dedicated to monitoring."
+	SYNTAX       INTEGER {
+		 				unknown(0),
+		 				all(1),
+						none(2),
+						mixed(3)
+					  }
+ 
+ArubaConfigurationState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION	
+		"Configuration Transfer Types."
+	SYNTAX		INTEGER {
+					success(1),
+					error(2)
+				}
+ 
+ArubaConfigurationChangeType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION	
+		"Configuration Change Types."
+	SYNTAX		INTEGER {
+					create(1),
+					delete(2),
+					modify(3)
+				}
+
+ArubaCallStates ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The Call state.
+		"
+	SYNTAX		INTEGER {
+				idle(0),
+				initiated(1),
+				connecting(2),
+				delivered(3),
+				connected(4),
+				offered(5),
+				alerting(6),
+				releasing(7),
+				cancelling(8),
+				challenging(9),
+				transient(10),
+				blockwait(11),
+				succ(12),
+				fail(13),
+				aborted(14),
+				blocked(15)
+			}
+   
+ArubaVoipProtocol ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  VoIP protocol used
+		"
+	SYNTAX		INTEGER {
+			sccp(1), 
+			svp(2), 
+			vocera(3), 
+			sip(9), ua(11) 
+	}
+
+ArubaVoipRegState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  VoIP registered state
+		"
+	SYNTAX		INTEGER {
+			unknown(0), 
+			registering(1), 
+			unregistering(2), 
+			challenge(3), 
+			registered(4), 
+			unregistered(5)
+	}
+
+ArubaVoiceCdrDirection ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  VoIP CDR direction
+		"
+	SYNTAX		INTEGER {
+			og(0), 
+			ic(1)
+	}
+
+ArubaVoiceCacBit ::= TEXTUAL-CONVENTION
+	STATUS    current
+	DESCRIPTION
+		"
+			Voice CAC bit flags
+		"
+	SYNTAX 	BITS {
+			cacActiveLoadBalancing(0),
+			cacHighCapThresholdReached(1),
+			cacHandRsrvThresholdReached(2),
+			cacPeakCapacityReached(3)
+	}
+	
+ArubaMeshRole ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  Mesh role
+		"
+	SYNTAX		INTEGER {
+			nonmesh(0),
+			point(1), 
+			portal(2)
+	}
+
+ArubaHTRate ::= TEXTUAL-CONVENTION
+   	STATUS       current
+   	DESCRIPTION
+           "Represents HT rate"
+    SYNTAX       INTEGER {
+					unknown(0),
+					ht6dot5(1),
+					ht13(2),
+					ht13dot5(3),
+					ht15(4),
+					ht19dot5(5),
+					ht26(6),
+					ht27(7),
+					ht30(8),
+					ht39(9),
+					ht40dot5(10),
+					ht45(11),
+					ht52(12),
+					ht54(13),
+					ht58dot5(14),
+					ht60(15),
+					ht65(16),
+					ht78(17),
+					ht81(18),
+					ht90(19),
+					ht104(20),
+					ht108(21),
+					ht117(22),
+					ht120(23),
+					ht121dot5(24),
+					ht130(25),
+					ht135(26),
+					ht150(27),
+					ht162(28),
+					ht180(29),
+					ht216(30),
+					ht240(31),
+					ht243(32),
+					ht270(33),
+					ht300(34)
+				 }
+
+ArubaUSBStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  USB device status
+		"
+	SYNTAX		INTEGER {
+			unknown(0),
+			notPresent(1), 
+			inactive(2),
+			active(3)
+	}
+
+ArubaARMChangeReason ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The reason for ARM based change.
+		"
+	SYNTAX       INTEGER {
+                       radarDetected(1),
+                       radarCleared(2),
+                       txHang(3),
+                       txHangClear(4),
+                       fortyMhzIntol(5),
+                       cancel40mhzIntol(6),
+                       fortyMhzAlign(7),
+                       armInterference(8),
+                       armInvalidCh(9),
+                       armErrorThresh(10),
+                       armNoiseThresh(11),
+                       armEmptyCh(12),
+                       armRogueCont(13),
+                       armDecreasePower(14),
+                       armIncreasePower(15),
+                       armTurnOffRadio(16),
+                       armTurnOnRadio(17)
+   }
+
+ArubaAPMasterStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  AP status as seen by the master controller
+          (used to indicate a status change).
+		"
+	SYNTAX		INTEGER {
+			up(1),
+			down(2), 
+			move(3)
+	}
+
+ArubaAPUplinkType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "
+          AP uplink type
+        "
+    SYNTAX       INTEGER {
+            ethernet(1),
+            usb(2),
+            pppoe(3),
+            wifi(4)
+    }
+
+ArubaAPUplinkChangeReason ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the reason for AP uplink change.
+
+        linkFailure - The uplink went down
+        vpnFailure  - VPN tunnel could not be sustained using the uplink
+        preemption  - The uplink was pre-empted by a higher-priority uplink"
+    SYNTAX  INTEGER {
+        linkFailure(1),
+        vpnFailure(2),
+        preemption(3),
+        internetFailover(4)
+    }
+
+ArubaPortalServerDownReason ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the reason for Portal server down.
+
+        connectFail - Connect Portal server fail"
+    SYNTAX  INTEGER {
+        connectFail(1)
+    }
+
+   aiInfoGroup                OBJECT IDENTIFIER ::= { aiMIB 1 }
+   aiStateGroup               OBJECT IDENTIFIER ::= { aiMIB 2 }
+   aiManagedInfoGroup         OBJECT IDENTIFIER ::= { aiMIB 3 }
+
+
+   aiVirtualControllerKey  OBJECT-TYPE 
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "Unique Virtual Controller key"
+        ::= { aiInfoGroup 1 }
+
+   aiVirtualControllerName  OBJECT-TYPE 
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "Virtual Controller name"
+        ::= { aiInfoGroup 2 }
+
+   aiVirtualControllerOrganization  OBJECT-TYPE 
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "Virtual Controller organization"
+        ::= { aiInfoGroup 3 }
+
+   aiVirtualControllerVersion  OBJECT-TYPE 
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "Software Version"
+        ::= { aiInfoGroup 4 }
+
+   aiVirtualControllerIPAddress OBJECT-TYPE
+       SYNTAX      IpAddress 
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Virtual Controller IP Address. If this is not set, returns 0.0.0.0"
+       ::= { aiInfoGroup 5 }
+
+   aiMasterIPAddress OBJECT-TYPE
+       SYNTAX      IpAddress 
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "IP Address of AP where virtual controller software is active"
+       ::= { aiInfoGroup 6 }
+    
+   aiWlanSSIDTable  OBJECT-TYPE 
+         SYNTAX       SEQUENCE OF AiWlanSSIDEntry
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            ""
+        ::= { aiInfoGroup 7 }
+
+   aiWlanSSIDEntry OBJECT-TYPE 
+       SYNTAX      AiWlanSSIDEntry
+       MAX-ACCESS  not-accessible       
+       STATUS       current 
+       DESCRIPTION
+          " "
+          INDEX { aiSSIDIndex }
+        ::= { aiWlanSSIDTable 1}
+
+   AiWlanSSIDEntry ::=
+   SEQUENCE {
+        aiSSIDIndex       		    Integer32,
+        aiSSID            		    OCTET STRING,
+        aiSSIDStatus      		    INTEGER,
+        aiSSIDClientNum             Integer32,
+        aiSSIDHide                  INTEGER
+   }
+
+   aiSSIDIndex OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "SSID Index"
+       ::= { aiWlanSSIDEntry 1 }
+
+   aiSSID OBJECT-TYPE
+       SYNTAX      OCTET STRING (SIZE(0..64))
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "SSID"
+       ::= { aiWlanSSIDEntry 2 }
+
+   aiSSIDStatus OBJECT-TYPE
+       SYNTAX      INTEGER {
+                        enable(0), 
+                        disable(1)
+                    }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Indicates the whether the SSID is enabled(0) or disabled(1)"
+       ::= { aiWlanSSIDEntry 3 }
+
+   aiSSIDClientNum   OBJECT-TYPE       
+        SYNTAX      Integer32       
+        MAX-ACCESS  read-only       
+        STATUS      current       
+        DESCRIPTION            
+            "Client Number of per SSID"       
+        ::= { aiWlanSSIDEntry 4 }
+
+   aiSSIDHide OBJECT-TYPE
+       SYNTAX      INTEGER {
+                        enable(1), 
+                        disable(0)
+                    }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Indicates the whether the SSID is hide enabled(1) or disabled(0)"
+            ::= { aiWlanSSIDEntry 5 }
+
+   aiMeshTable  OBJECT-TYPE 
+         SYNTAX       SEQUENCE OF AiMeshEntry
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            ""
+        ::= { aiInfoGroup 15 }
+   
+   aiMeshEntry OBJECT-TYPE 
+       SYNTAX      AiMeshEntry
+       MAX-ACCESS  not-accessible       
+       STATUS       current 
+       DESCRIPTION
+          " "
+          INDEX { aiMeshIndex }
+        ::= { aiMeshTable 1}
+
+   AiMeshEntry ::=
+   SEQUENCE {
+        aiMeshIndex       Integer32,
+        aiMeshPointMac    MacAddress,
+        aiMeshPortalMac   DisplayString,
+        aiMeshChannel     DisplayString,
+        aiMeshAvgRssi     Integer32,
+        aiMeshHops        Integer32,
+        aiMeshAge         Integer32,
+        aiMeshCost        DisplayString,
+        aiMeshRelation    DisplayString
+   }
+
+   aiMeshIndex OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Index"
+       ::= { aiMeshEntry 1 }
+
+   aiMeshPointMac OBJECT-TYPE
+       SYNTAX      MacAddress
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Point Mac Address"
+       ::= { aiMeshEntry 2 }
+  
+   aiMeshPortalMac OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Portal Mac Address"
+       ::= { aiMeshEntry 3 }
+
+   aiMeshChannel OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Channel"
+       ::= { aiMeshEntry 4 }
+
+   aiMeshAvgRssi OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Average RSSI"
+       ::= { aiMeshEntry 5 }
+
+   aiMeshHops OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Hops"
+       ::= { aiMeshEntry 6 }
+
+   aiMeshAge OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Age"
+       ::= { aiMeshEntry 7 }
+
+   aiMeshCost OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Cost"
+       ::= { aiMeshEntry 8 }
+
+   aiMeshRelation OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Mesh Relation"
+       ::= { aiMeshEntry 9 }
+    
+   aiAccessPointTable  OBJECT-TYPE
+        SYNTAX       SEQUENCE OF AiAccessPointEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+             "This contains all access points connected to the
+             virtual controller. This table is empty on AP where
+             virtual controller is not active"
+        ::= { aiStateGroup 1 }
+
+    aiAccessPointEntry OBJECT-TYPE
+        SYNTAX       AiAccessPointEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+          " "
+       INDEX { aiAPMACAddress }
+        ::= { aiAccessPointTable 1 }
+	   
+    AiAccessPointEntry ::= 
+    SEQUENCE {
+        aiAPMACAddress      MacAddress,
+        aiAPName            DisplayString,
+        aiAPIPAddress       IpAddress,
+        aiAPSerialNum       DisplayString,
+        aiAPModel           OBJECT IDENTIFIER,
+        aiAPModelName       DisplayString,
+        aiAPCPUUtilization  Integer32,
+        aiAPMemoryFree      Integer32,
+        aiAPUptime          TimeTicks,
+        aiAPTotalMemory     Integer32,
+        aiAPStatus          INTEGER,
+        aiAPHwopmode        INTEGER,
+        aiAPRole            DisplayString 
+   }
+
+   aiAPMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Access Point MAC Address"
+      ::= { aiAccessPointEntry 1 }
+
+   aiAPName OBJECT-TYPE
+       SYNTAX      DisplayString (SIZE(0..255))
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point name"
+       ::= { aiAccessPointEntry 2 }
+
+   aiAPIPAddress OBJECT-TYPE
+       SYNTAX      IpAddress 
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point IP Address"
+       ::= { aiAccessPointEntry 3 }
+
+   aiAPSerialNum OBJECT-TYPE
+       SYNTAX      DisplayString (SIZE(0..64))
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point Serial Number"
+       ::= { aiAccessPointEntry 4 }
+
+   aiAPModel OBJECT-TYPE
+       SYNTAX      OBJECT IDENTIFIER
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point System OID"
+       ::= { aiAccessPointEntry 5 }
+
+   aiAPModelName OBJECT-TYPE
+       SYNTAX      DisplayString (SIZE(0..32))
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point Model Name"
+       ::= { aiAccessPointEntry 6 }
+
+   aiAPCPUUtilization OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point CPU Utilization"
+       ::= { aiAccessPointEntry 7 }
+
+   aiAPMemoryFree OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Amount of memory free in the access point in bytes"
+       ::= { aiAccessPointEntry 8 }
+
+   aiAPUptime OBJECT-TYPE
+       SYNTAX      TimeTicks
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Access Point uptime"
+       ::= { aiAccessPointEntry 9 }
+
+   aiAPTotalMemory OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total amount of memory available in the AP in bytes"
+       ::= { aiAccessPointEntry 10 }
+
+   aiAPStatus OBJECT-TYPE
+       SYNTAX      INTEGER {
+                        up(1),
+                        down(2)
+                    }
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Indicates the Access Point Status"
+       ::= { aiAccessPointEntry 11 }
+   
+   aiAPHwopmode OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        default(0),
+                        rsdbsplit(1),
+                        rsdb5g(2),
+                        rsdb2g(3),
+                        dual5gon(4),
+                        dual5goff(5),
+                        split5goff(6),
+                        split5gon(7)
+
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+             "AP HW OPMODE"
+        ::= { aiAccessPointEntry 12 }
+    
+   aiAPRole OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+               "AP State"
+        ::= { aiAccessPointEntry 13 }
+
+    aiRadioTable  OBJECT-TYPE 
+       SYNTAX       SEQUENCE OF AiRadioEntry
+       MAX-ACCESS   not-accessible              
+       STATUS       current 
+       DESCRIPTION 
+                "This table contains all radios of all access points
+                connected to the virtual controller. This table is
+                indexed by Access Point MAC Address and radio number"
+       ::= { aiStateGroup 2 } 
+
+   aiRadioEntry OBJECT-TYPE 
+       SYNTAX       AiRadioEntry 
+       MAX-ACCESS   not-accessible            
+       STATUS       current 
+       DESCRIPTION 
+             " "
+          INDEX { aiRadioAPMACAddress, aiRadioIndex }
+       ::= { aiRadioTable 1 } 
+
+   AiRadioEntry ::=
+   SEQUENCE {
+        aiRadioAPMACAddress      MacAddress,
+        aiRadioIndex             Integer32,
+        aiRadioMACAddress        MacAddress,
+        aiRadioChannel           DisplayString,
+        aiRadioTransmitPower     Integer32,
+        aiRadioNoiseFloor        Integer32,
+        aiRadioUtilization4      Integer32,
+        aiRadioUtilization64     Integer32,
+        aiRadioTxTotalFrames     Counter32,
+        aiRadioTxMgmtFrames      Counter32,
+        aiRadioTxDataFrames      Counter32,
+        aiRadioTxDataBytes       Counter32,
+        aiRadioTxDrops           Counter32,
+        aiRadioRxTotalFrames     Counter32,
+        aiRadioRxDataFrames      Counter32,
+        aiRadioRxDataBytes       Counter32,
+        aiRadioRxMgmtFrames      Counter32,
+        aiRadioRxBad             Counter32,
+        aiRadioPhyEvents         Counter32,
+        aiRadioStatus            INTEGER,
+        aiRadioClientNum         Integer32,
+        aiRadioMode              DisplayString
+   }
+
+   aiRadioAPMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "MAC Address of access point where this radio is active"
+      ::= { aiRadioEntry 1 }
+
+   aiRadioIndex OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio number"
+      ::= { aiRadioEntry 2 }
+
+
+   aiRadioMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio MAC Address"
+      ::= { aiRadioEntry 3 }
+
+
+   aiRadioChannel OBJECT-TYPE
+       SYNTAX       DisplayString
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+          "
+            Radio channel. First byte contains primary channel and
+            first two bits on second byte contains indicator for secondary
+            channel. If first two bits of second byte is 0, it is a 20MHz
+            channel. If first two bits of second byte is 01, secondary channel is
+            above primary channel, if first two bits of second by is 10, secondary
+            channel is below the primary channel.
+          "
+      ::= { aiRadioEntry 4 }
+
+   aiRadioTransmitPower OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio transmit power"
+      ::= { aiRadioEntry 5 }
+
+   aiRadioNoiseFloor OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio noise floor in dBm"
+      ::= { aiRadioEntry 6 }
+
+   aiRadioUtilization4 OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio channel utilization 4 second average"
+      ::= { aiRadioEntry 7 }
+
+   aiRadioUtilization64 OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio channel utilization 64 second average"
+      ::= { aiRadioEntry 8 }
+
+   aiRadioTxTotalFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Total transmitted frames"
+      ::= { aiRadioEntry 9 }
+
+   aiRadioTxMgmtFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Transmitted management frames"
+      ::= { aiRadioEntry 10 }
+
+   aiRadioTxDataFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Transmitted data frames"
+      ::= { aiRadioEntry 11 }
+
+   aiRadioTxDataBytes OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Transmitted data bytes"
+      ::= { aiRadioEntry 12 }
+
+   aiRadioTxDrops OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Total frames dropped during transmission"
+      ::= { aiRadioEntry 13 }
+
+   aiRadioRxTotalFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Total received frames"
+      ::= { aiRadioEntry 14 }
+
+   aiRadioRxDataFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Received data frames"
+      ::= { aiRadioEntry 15 }
+
+   aiRadioRxDataBytes OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Received data bytes"
+      ::= { aiRadioEntry 16 }
+
+   aiRadioRxMgmtFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Received management frames"
+      ::= { aiRadioEntry 17 }
+
+   aiRadioRxBad OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Frames received in error"
+      ::= { aiRadioEntry 18 }
+
+   aiRadioPhyEvents OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Number of phy events that indicates frames not received
+            because of interference"
+      ::= { aiRadioEntry 19 }
+
+   aiRadioStatus    OBJECT-TYPE
+       SYNTAX       INTEGER {
+                        up(1),
+                        down(2)
+                    }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio state of AP - UP/DOWN"
+      ::= { aiRadioEntry 20 }
+
+   aiRadioClientNum OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Client Number of per Radio"
+      ::= { aiRadioEntry 21 }
+   
+   aiRadioMode    OBJECT-TYPE
+       SYNTAX       DisplayString 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Radio state of AP - access/monitor"
+      ::= { aiRadioEntry 22 }
+   
+   aiWlanTable  OBJECT-TYPE 
+       SYNTAX       SEQUENCE OF AiWlanEntry
+       MAX-ACCESS   not-accessible              
+       STATUS       current 
+       DESCRIPTION 
+                "This table contains all BSSIDs active on this virtual
+                controller. This table is indexed by Access Point MAC 
+                Address and a WLAN Index"
+       ::= { aiStateGroup 3 } 
+
+   aiWlanEntry OBJECT-TYPE 
+       SYNTAX       AiWlanEntry 
+       MAX-ACCESS   not-accessible            
+       STATUS       current 
+       DESCRIPTION 
+             " "
+          INDEX { aiWlanAPMACAddress, aiWlanIndex }
+       ::= { aiWlanTable 1 } 
+
+   AiWlanEntry ::=
+   SEQUENCE {
+        aiWlanAPMACAddress      MacAddress,
+        aiWlanIndex             Integer32,
+        aiWlanESSID             DisplayString,
+        aiWlanMACAddress        MacAddress,
+        aiWlanTxTotalFrames     Counter32,
+        aiWlanTxDataFrames      Counter32,
+        aiWlanTxDataBytes       Counter32,
+        aiWlanRxTotalFrames     Counter32,
+        aiWlanRxDataFrames      Counter32,
+        aiWlanRxDataBytes       Counter32
+   }
+
+   aiWlanAPMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "MAC Address of access point where WLAN is active"
+      ::= { aiWlanEntry 1 }
+
+   aiWlanIndex OBJECT-TYPE
+       SYNTAX       Integer32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Index of WLAN. This is a unique index assigned to the WLAN
+            active on the access point."
+      ::= { aiWlanEntry 2 }
+
+   aiWlanESSID OBJECT-TYPE
+       SYNTAX       DisplayString
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "ESSID of WLAN"
+      ::= { aiWlanEntry 3 }
+
+   aiWlanMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "BSSID of WLAN"
+      ::= { aiWlanEntry 4 }
+
+   aiWlanTxTotalFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Total transmitted frames"
+      ::= { aiWlanEntry 5 }
+
+   aiWlanTxDataFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Transmitted data frames"
+      ::= { aiWlanEntry 6 }
+
+   aiWlanTxDataBytes OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Transmitted data bytes"
+      ::= { aiWlanEntry 7 }
+
+   aiWlanRxTotalFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Total received frames"
+      ::= { aiWlanEntry 8 }
+
+   aiWlanRxDataFrames OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Received data frames"
+      ::= { aiWlanEntry 9 }
+
+   aiWlanRxDataBytes OBJECT-TYPE
+       SYNTAX       Counter32
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Received data bytes"
+      ::= { aiWlanEntry 10 }
+   
+   aiClientTable  OBJECT-TYPE 
+       SYNTAX       SEQUENCE OF AiClientEntry
+       MAX-ACCESS   not-accessible              
+       STATUS       current 
+       DESCRIPTION 
+                "This table contains information about all clients
+                connected to the virtual controller. When a client roams
+                from one access point to another, all counters in this 
+                table are reset to 0. aiClientUptime also get reset on a
+                mobility event"
+       ::= { aiStateGroup 4 } 
+
+   aiClientEntry OBJECT-TYPE 
+       SYNTAX       AiClientEntry 
+       MAX-ACCESS   not-accessible            
+       STATUS       current 
+       DESCRIPTION 
+             " "
+          INDEX { aiClientMACAddress }
+       ::= { aiClientTable 1 } 
+
+   AiClientEntry ::=
+   SEQUENCE {
+        aiClientMACAddress      MacAddress,
+        aiClientWlanMACAddress  MacAddress,
+        aiClientIPAddress       IpAddress,
+        aiClientAPIPAddress     IpAddress,
+        aiClientName            DisplayString,
+        aiClientOperatingSystem DisplayString,
+        aiClientSNR             Integer32,
+        aiClientTxDataFrames    Counter32,
+        aiClientTxDataBytes     Counter32,
+        aiClientTxRetries       Counter32,
+        aiClientTxRate          Integer32,
+        aiClientRxDataFrames    Counter32,
+        aiClientRxDataBytes     Counter32,
+        aiClientRxRetries       Counter32,
+        aiClientRxRate          Integer32,
+        aiClientUptime          TimeTicks,
+        aiClientPhyType         ArubaPhyType,
+        aiClientHtMode          ArubaHTMode
+   }
+
+   aiClientMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "MAC Address of client"
+      ::= { aiClientEntry 1 }
+
+   aiClientWlanMACAddress OBJECT-TYPE
+       SYNTAX       MacAddress 
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "BSSID of WLAN where client is associated"
+      ::= { aiClientEntry 2 }
+
+   aiClientIPAddress OBJECT-TYPE
+       SYNTAX      IpAddress 
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Client IP Address"
+       ::= { aiClientEntry 3 }
+
+
+   aiClientAPIPAddress OBJECT-TYPE
+       SYNTAX      IpAddress 
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Associated Access Point IP Address"
+       ::= { aiClientEntry 4 }
+
+   aiClientName OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Name of user using the client"
+       ::= { aiClientEntry 5 }
+
+   aiClientOperatingSystem OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Client operating system"
+       ::= { aiClientEntry 6 }
+
+   aiClientSNR OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Signal to noise ratio of client connection to the access point"
+       ::= { aiClientEntry 7 }
+
+   aiClientTxDataFrames OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total frames transmitted by the client"
+       ::= { aiClientEntry 8 }
+
+   aiClientTxDataBytes OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total bytes transmitted by the client"
+       ::= { aiClientEntry 9 }
+
+   aiClientTxRetries OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total number of retry frames transmitted by the client"
+       ::= { aiClientEntry 10 }
+
+   aiClientTxRate OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Transmit rate of client in mbps"
+       ::= { aiClientEntry 11 }
+
+   aiClientRxDataFrames OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total frames received by the client"
+       ::= { aiClientEntry 12 }
+
+   aiClientRxDataBytes OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total bytes received by the client"
+       ::= { aiClientEntry 13 }
+
+   aiClientRxRetries OBJECT-TYPE
+       SYNTAX      Counter32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Total number of retry frames received by the client"
+       ::= { aiClientEntry 14 }
+
+   aiClientRxRate OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Receive rate of client in mbps"
+       ::= { aiClientEntry 15 }
+
+   aiClientUptime OBJECT-TYPE
+       SYNTAX      TimeTicks
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Client uptime. On mobility event all counters are reset to
+            0 and uptime gets reset to 0."
+       ::= { aiClientEntry 16 }
+
+    aiClientPhyType OBJECT-TYPE
+       SYNTAX      ArubaPhyType
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "The wireless PHY type to which the client is associated, or 'wired'"
+       ::= { aiClientEntry 17 }
+
+    aiClientHtMode OBJECT-TYPE
+       SYNTAX      ArubaHTMode
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "The HT mode of this Client"
+       ::= { aiClientEntry 18 }
+
+--- Begining of voice client location entry       
+
+   aiVoiceClientTable  OBJECT-TYPE
+       SYNTAX       SEQUENCE OF AiVoiceClientEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION
+            "Table of voice clients"
+       ::= { aiStateGroup 5 }
+
+   aiVoiceClientEntry   OBJECT-TYPE
+       SYNTAX       AiVoiceClientEntry
+       MAX-ACCESS   not-accessible
+       STATUS       current
+       DESCRIPTION 
+            "Entry of a voice client"
+           INDEX        { aiClientMac }
+       ::= { aiVoiceClientTable 1}
+   
+   AiVoiceClientEntry ::=
+   SEQUENCE {
+        aiClientMac      MacAddress, 
+        aiClientIP       IpAddress,
+        aiClientAPMac    MacAddress,
+        aiClientAPName   DisplayString
+   }
+
+   aiClientMac  OBJECT-TYPE
+        SYNTAX      MacAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "MAC address of voice client"
+        ::= { aiVoiceClientEntry 1 }
+
+
+   aiClientIP   OBJECT-TYPE
+       SYNTAX       IpAddress
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "IP address of voice client"
+       ::= { aiVoiceClientEntry 2 }
+   
+   aiClientAPMac  OBJECT-TYPE
+        SYNTAX      MacAddress
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "MAC address of AP on which voice client is associated currently"
+        ::= { aiVoiceClientEntry 3 }
+
+
+   aiClientAPName   OBJECT-TYPE
+       SYNTAX       DisplayString
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+            "Name of AP on which voice client is associated currently"
+       ::= { aiVoiceClientEntry 4 }
+
+--- End of voice client location entry
+
+--- Begin of Interfer AP entry
+   aiInterferAccessPointTable  OBJECT-TYPE 
+    SYNTAX       SEQUENCE OF AiInterferAccessPointEntry
+    MAX-ACCESS   not-accessible              
+    STATUS       current 
+    DESCRIPTION 
+             "This contains all interfer access points infomation"
+    ::= { aiInfoGroup 8 } 
+
+   aiInterferAccessPointEntry OBJECT-TYPE 
+       SYNTAX       AiInterferAccessPointEntry 
+       MAX-ACCESS   not-accessible            
+       STATUS       current 
+       DESCRIPTION 
+             " "
+          INDEX { aiInterferAPIndex }
+       ::= { aiInterferAccessPointTable 1 } 
+
+   AiInterferAccessPointEntry ::=
+   SEQUENCE {
+        aiInterferAPIndex           Integer32,
+        aiInterferAPBSSID           MacAddress,
+        aiInterferAPESSID           OCTET STRING,
+        aiInterferAPChannel         DisplayString,
+        aiInterferAPPhyType         DisplayString,
+        aiInterferAPEncr            DisplayString,
+        aiInterferAPAvgSnr          Integer32,
+        aiInterferAPType            DisplayString
+   }
+    
+    aiInterferAPIndex OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point Index"
+       ::= { aiInterferAccessPointEntry 1 }
+
+    aiInterferAPBSSID  OBJECT-TYPE
+       SYNTAX      MacAddress
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point MAC"
+       ::= { aiInterferAccessPointEntry 2 }
+
+    aiInterferAPESSID OBJECT-TYPE
+       SYNTAX      OCTET STRING (SIZE(0..64))
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point ESSID"
+       ::= { aiInterferAccessPointEntry 3 }
+       
+    aiInterferAPChannel OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point Channel"
+       ::= { aiInterferAccessPointEntry 4 }
+   
+    aiInterferAPPhyType OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point Phy Type"
+       ::= { aiInterferAccessPointEntry 5 }
+
+    aiInterferAPEncr OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point Encryption"
+       ::= { aiInterferAccessPointEntry 6 }
+
+       
+    aiInterferAPAvgSnr OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point Average Snr"
+       ::= { aiInterferAccessPointEntry 7 }
+
+    aiInterferAPType OBJECT-TYPE
+       SYNTAX      DisplayString
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+            "Interfer Access Point AP Type"
+       ::= { aiInterferAccessPointEntry 8 }
+
+--- End of Interfer AP entry
+   
+   aiManagedModeSinceLastSync OBJECT-TYPE 
+         SYNTAX       DisplayString 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "Time since last config was applied"
+        ::= { aiManagedInfoGroup 1 }
+
+
+-- aiTrapsGroup
+-- This group defines all the traps generated by the switch.
+
+	aiTrapsGroup         	OBJECT IDENTIFIER ::= { aiMIB 200 }
+
+--Trap Object Group contains objects used in the traps.
+
+	aiTrapObjectsGroup         	OBJECT IDENTIFIER ::= { aiTrapsGroup 1 }
+
+--Trap Definitions Group contains Traps definitions.
+
+	aiTrapDefinitionsGroup      OBJECT IDENTIFIER ::= { aiTrapsGroup 2 }
+
+	wlsxTrapAPMacAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate 
+            the wired MAC address of an access point, for which the trap is being raised.
+        			"
+	::= {aiTrapObjectsGroup 1 }
+
+	wlsxTrapAPIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate 
+            the IP address of an access point, for which the trap is being raised.
+        			"
+	::= {aiTrapObjectsGroup 2 }
+
+	wlsxTrapAPBSSID OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the BSSID of the
+            access point, for which the trap is being raised.
+        			"
+	::= {aiTrapObjectsGroup 3 }
+
+	wlsxTrapEssid OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the SSID of the
+          access point, for which the trap is being raised.
+        			"
+	::= {aiTrapObjectsGroup 4 }
+
+	wlsxTrapTargetAPBSSID OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the BSSID of the
+            access point, for which we are raising the trap. If an
+            Air Monitor is sending the trap then this will indicate
+            AP. If an access point is sending the trap, then it will point
+            to itself.
+        			"
+	::= {aiTrapObjectsGroup 5 }
+
+	wlsxTrapTargetAPSSID OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the SSID of the
+          access point, for which the trap is being raised. If an
+          Air Monitor is sending the trap then this will indicate
+          AP. If an access point is sending the trap, then it will point
+          to itself.
+        			"
+	::= {aiTrapObjectsGroup 6 }
+
+	wlsxTrapTargetAPChannel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the channel of the
+          access point, for which the trap is being raised. If an
+          wlsxr monitor is sending the trap then this will indicate
+          AP. If an access point is sending the trap, then it will point
+          to itself.
+        			"
+	::= {aiTrapObjectsGroup 7 }
+
+	wlsxTrapNodeMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          a node.
+        			"
+	::= {aiTrapObjectsGroup 8 }
+
+	wlsxTrapSourceMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the source.
+        			"
+	::= {aiTrapObjectsGroup 9 }
+
+	wlsxReceiverMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the receiver.
+        			"
+	::= {aiTrapObjectsGroup 10 }
+
+	wlsxTrapTransmitterMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the transmitter.
+        			"
+	::= {aiTrapObjectsGroup 11 }
+
+	wlsxTrapReceiverMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the receiver.
+        			"
+	::= {aiTrapObjectsGroup 12 }
+
+	wlsxTrapSnr OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Signal to Noise
+          ratio.
+        			"
+	::= {aiTrapObjectsGroup 13 }
+
+	wlsxTrapSignatureName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Signature Name.
+        			"
+	::= {aiTrapObjectsGroup 14 }
+
+	wlsxTrapFrameType OBJECT-TYPE
+		SYNTAX		ArubaFrameType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Frame Type
+        			"
+	::= {aiTrapObjectsGroup 15 }
+
+	wlsxTrapAddressType OBJECT-TYPE
+		SYNTAX		ArubaAddressType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Address type.
+        			"
+	::= {aiTrapObjectsGroup 16 }
+
+	wlsxTrapAPLocation OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..255))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Location of the AP.
+        			"
+	::= {aiTrapObjectsGroup 17 }
+
+	wlsxTrapAPChannel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Current Channel.
+        			"
+	::= {aiTrapObjectsGroup 18 }
+
+	wlsxTrapAPTxPower OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the AP Transmit Power.
+        			"
+	::= {aiTrapObjectsGroup 19 }
+
+	wlsxTrapMatchedMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the MAC address
+        			"
+	::= {aiTrapObjectsGroup 20 }
+
+	wlsxTrapMatchedIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the IP address
+        			"
+	::= {aiTrapObjectsGroup 21 }
+
+	wlsxTrapRogueIfoURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used to point to the WEBUI Rogue AP information URL.
+        			"
+	::= {aiTrapObjectsGroup 22 }
+
+	wlsxTrapVlanId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the VLAN Id.
+        			"
+	::= {aiTrapObjectsGroup 23 }
+
+	wlsxTrapAdminStatus OBJECT-TYPE
+		SYNTAX		ArubaEnableValue
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the admin status of
+            VLAN.
+        			"
+	::= {aiTrapObjectsGroup 24 }
+
+	wlsxTrapOperStatus OBJECT-TYPE
+		SYNTAX		ArubaOperStateValue
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the admin status of
+            VLAN.
+        			"
+	::= {aiTrapObjectsGroup 25 }
+
+	wlsxTrapAuthServerName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Authentication Server used for Authentication.
+        			"
+	::= {aiTrapObjectsGroup 26 }
+
+	wlsxTrapAuthServerTimeout OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Authentication Server Timeout.
+        			"
+	::= {aiTrapObjectsGroup 27 }
+
+	wlsxTrapCardSlot OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+           Slot in which this card is present.
+        			"
+	::= {aiTrapObjectsGroup 28 }
+
+	wlsxTrapTemperatureValue OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Temperature Value.
+        			"
+	::= {aiTrapObjectsGroup 29 }
+
+	wlsxTrapProcessName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Process name.
+        			"
+	::= {aiTrapObjectsGroup 30 }
+
+	wlsxTrapFanNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Fan Number.
+        			"
+	::= {aiTrapObjectsGroup 31 }
+
+	wlsxTrapVoltageType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            type of Voltage.
+        			"
+	::= {aiTrapObjectsGroup 32 }
+
+	wlsxTrapVoltageValue OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            voltage value in Float.
+        			"
+	::= {aiTrapObjectsGroup 33 }
+
+	wlsxTrapStationBlackListReason OBJECT-TYPE
+		SYNTAX		ArubaBlackListReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            The Reason for which a station is black listed.
+        			"
+	::= {aiTrapObjectsGroup 34 }
+
+	wlsxTrapSpoofedIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify a spoofed IP address.
+        			"
+	::= {aiTrapObjectsGroup 35 }
+
+	wlsxTrapSpoofedOldPhyAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify an old MAC address.
+        			"
+	::= {aiTrapObjectsGroup 36 }
+
+	wlsxTrapSpoofedNewPhyAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify a New MAC address.
+        			"
+	::= {aiTrapObjectsGroup 37 }
+
+	wlsxTrapDBName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify name of the database.
+        			"
+	::= {aiTrapObjectsGroup 38 }
+
+	wlsxTrapDBUserName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify name of the database user.
+        			"
+	::= {aiTrapObjectsGroup 39 }
+
+	wlsxTrapDBIpAddress OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify the IpAddress of the 
+            Database.
+        			"
+	::= {aiTrapObjectsGroup 40 }
+
+	wlsxTrapDBType OBJECT-TYPE
+		SYNTAX		ArubaDBType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify the port of the user.
+        			"
+	::= {aiTrapObjectsGroup 41 }
+
+	wlsxTrapVrrpID OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object contains the Virtual Router Identifier.
+        			"
+	::= {aiTrapObjectsGroup 42 }
+
+	wlsxTrapVrrpMasterIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object contains the Master IP address.
+        			"
+	::= {aiTrapObjectsGroup 43 }
+
+	wlsxTrapVrrpOperState OBJECT-TYPE
+		SYNTAX		ArubaVrrpState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the VRRP Operational state.
+        			"
+	::= {aiTrapObjectsGroup 44 }
+
+	wlsxTrapESIServerGrpName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the External Services Interface (ESI) Server
+            Group name
+        			"
+	::= {aiTrapObjectsGroup 45 }
+
+	wlsxTrapESIServerName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the External Services Interface (ESI) Server
+            Name
+        			"
+	::= {aiTrapObjectsGroup 46 }
+
+	wlsxTrapESIServerIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the External Services Interface (ESI) Server
+            IP address
+        			"
+	::= {aiTrapObjectsGroup 47 }
+
+	wlsxTrapLicenseDaysRemaining OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents number of the days remaining prior to a 
+            license expiry.
+        			"
+	::= {aiTrapObjectsGroup 48 }
+
+	wlsxTrapSwitchIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the controller IP address. 
+        			"
+	::= {aiTrapObjectsGroup 49 }
+
+	wlsxTrapSwitchRole OBJECT-TYPE
+		SYNTAX		ArubaSwitchRole
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Role of the controller. 
+        			"
+	::= {aiTrapObjectsGroup 50 }
+
+	wlsxTrapUserIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents IP address of the User.
+        			"
+	::= {aiTrapObjectsGroup 51 }
+
+	wlsxTrapUserPhyAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents MAC address of the User.
+        			"
+	::= {aiTrapObjectsGroup 52 }
+
+	wlsxTrapUserName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the user name.
+        			"
+	::= {aiTrapObjectsGroup 53 }
+
+	wlsxTrapUserRole OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Authentication method of the user.
+        			"
+	::= {aiTrapObjectsGroup 54 }
+
+	wlsxTrapUserAuthenticationMethod OBJECT-TYPE
+		SYNTAX		ArubaAuthenticationMethods
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Authentication method of the user.
+        			"
+	::= {aiTrapObjectsGroup 55 }
+
+	wlsxTrapAPRadioNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the radio number.
+        			"
+	::= {aiTrapObjectsGroup 56 }
+
+	wlsxTrapRogueInfoURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+			This object is used to point to the WEBGUI Rogue AP information 
+			URL.
+        			"
+	::= {aiTrapObjectsGroup 57 }
+
+	wlsxTrapInterferingAPInfoURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+			This object is used to point to the WEBGUI Rogue interfering 
+			AP information URL.
+        			"
+	::= {aiTrapObjectsGroup 58 }
+
+	wlsxTrapPortNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+           port number.
+        			"
+	::= {aiTrapObjectsGroup 59 }
+
+	wlsxTrapTime OBJECT-TYPE
+		SYNTAX		DateAndTime
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in all the enterprise traps to indicate the
+           the time when the trap is generated on the controller.
+        			"
+	::= {aiTrapObjectsGroup 60 }
+
+	wlsxTrapHostIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Trap host. 
+        			"
+	::= {aiTrapObjectsGroup 61 }
+
+	wlsxTrapHostPort OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Trap host port. 
+        			"
+	::= {aiTrapObjectsGroup 62 }
+
+	wlsxTrapConfigurationId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the ID of the configuration, to be used in traps.
+        			"
+	::= {aiTrapObjectsGroup 63 }
+
+	wlsxTrapCTSURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the URL from which the transfer should happen.
+        			"
+	::= {aiTrapObjectsGroup 64 }
+
+	wlsxTrapCTSTransferType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents  the transfer type, upload or download.
+        			"
+	::= {aiTrapObjectsGroup 65 }
+
+	wlsxTrapConfigurationState OBJECT-TYPE
+		SYNTAX		ArubaConfigurationState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents state of the configuration transfer.
+        			"
+	::= {aiTrapObjectsGroup 66 }
+
+	wlsxTrapUpdateFailureReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the reason for the update failure.
+        			"
+	::= {aiTrapObjectsGroup 67 }
+
+	wlsxTrapUpdateFailedObj OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This variable represents the AMAPI object which is the reason for the the update failure.
+        			"
+	::= {aiTrapObjectsGroup 68 }
+
+	wlsxTrapTableEntryChangeType OBJECT-TYPE
+		SYNTAX		ArubaConfigurationChangeType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents type of the configuration change. 
+        			"
+	::= {aiTrapObjectsGroup 69 }
+
+	wlsxTrapGlobalConfigObj OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This variable represents the AMAPI object corresponding to the global configuration change.
+        			"
+	::= {aiTrapObjectsGroup 70 }
+
+	wlsxTrapTableGenNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents generation number of a table. Used in the MMS, to keep track of the table content changes.
+        			"
+	::= {aiTrapObjectsGroup 71 }
+
+	wlsxTrapLicenseId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the license ID.
+        			"
+	::= {aiTrapObjectsGroup 72 }
+
+	wlsxTrapConfidenceLevel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the Confidence Level as a percentage
+        			"
+	::= {aiTrapObjectsGroup 73 }
+
+	wlsxTrapMissingLicenses OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This variable indicates any licenses that are not present during a configuration update
+        			"
+	::= {aiTrapObjectsGroup 74 }
+
+	wlsxVoiceCurrentNumCdr OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents  the number of CDRs in buffer.
+        			"
+	::= {aiTrapObjectsGroup 75 }
+
+	wlsxTrapTunnelId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel ID.
+        			"
+	::= {aiTrapObjectsGroup 76 }
+
+	wlsxTrapTunnelStatus OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel Status.
+        			"
+	::= {aiTrapObjectsGroup 77 }
+
+	wlsxTrapTunnelUpReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel up reason.
+        			"
+	::= {aiTrapObjectsGroup 78 }
+
+	wlsxTrapTunnelDownReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel down reason.
+        			"
+	::= {aiTrapObjectsGroup 79 }
+
+	wlsxTrapApSerialNumber OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the AP Serial Number.
+        			"
+	::= {aiTrapObjectsGroup 80 }
+
+	wlsxTrapTimeStr OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the Time in String format.
+        			"
+	::= {aiTrapObjectsGroup 81 }
+
+	wlsxTrapMasterIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the master IP address. 
+        			"
+	::= {aiTrapObjectsGroup 82 }
+
+	wlsxTrapLocalIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Local IP address.
+        			"
+	::= {aiTrapObjectsGroup 83 }
+
+	wlsxTrapMasterName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the master controller name.
+        			"
+	::= {aiTrapObjectsGroup 84 }
+
+	wlsxTrapLocalName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the local controller name.
+        			"
+	::= {aiTrapObjectsGroup 85 }
+
+	wlsxTrapPrimaryControllerIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IP address of the AP's primary controller.
+        			"
+	::= {aiTrapObjectsGroup 86 }
+
+	wlsxTrapBackupControllerIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IP address of the AP's backup controller.
+        			"
+	::= {aiTrapObjectsGroup 87 }
+
+	wlsxTrapSpoofedFrameType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Spoofed Frame Type
+        			"
+	::= {aiTrapObjectsGroup 88 }
+
+	wlsxTrapAssociationType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the type of association
+        			"
+	::= {aiTrapObjectsGroup 89 }
+
+	wlsxTrapDeviceIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IP address of a device seen by an AP.
+        			"
+	::= {aiTrapObjectsGroup 90 }
+
+	wlsxTrapDeviceMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the MAC address of a device seen by an AP.
+        			"
+	::= {aiTrapObjectsGroup 91 }
+
+	wlsxTrapVcIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Ip Address of a Voice client.
+        			"
+	::= {aiTrapObjectsGroup 92 }
+
+	wlsxTrapVcMacAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the MAC address of a Voice client.
+        			"
+	::= {aiTrapObjectsGroup 93 }
+
+	wlsxTrapAPName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..255))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Name of the AP.
+        			"
+	::= {aiTrapObjectsGroup 94 }
+
+	wlsxTrapApMode OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the AP Mode.
+        			"
+	::= {aiTrapObjectsGroup 95 }
+
+	wlsxTrapAPPrevChannel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Previous Channel.
+        			"
+	::= {aiTrapObjectsGroup 96 }
+
+	wlsxTrapAPPrevChannelSec OBJECT-TYPE
+		SYNTAX		ArubaHTExtChannel
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Previous Secondary Channel.
+        			"
+	::= {aiTrapObjectsGroup 97 }
+
+	wlsxTrapAPPrevTxPower OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate previous AP Transmit Power.
+        			"
+	::= {aiTrapObjectsGroup 98 }
+
+	wlsxTrapAPCurMode OBJECT-TYPE
+		SYNTAX		ArubaAccessPointMode
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the APs Current Mode.
+        			"
+	::= {aiTrapObjectsGroup 99 }
+
+	wlsxTrapAPPrevMode OBJECT-TYPE
+		SYNTAX		ArubaAccessPointMode
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the APs Previous Mode.
+        			"
+	::= {aiTrapObjectsGroup 100 }
+
+	wlsxTrapAPARMChangeReason OBJECT-TYPE
+		SYNTAX		ArubaARMChangeReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the APs Previous Mode.
+        			"
+	::= {aiTrapObjectsGroup 101 }
+
+	wlsxTrapAPChannelSec OBJECT-TYPE
+		SYNTAX		ArubaHTExtChannel
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Current Secondary Channel.
+        			"
+	::= {aiTrapObjectsGroup 102 }
+
+	wlsxTrapUserAttributeChangeType OBJECT-TYPE
+		SYNTAX		ArubaConfigurationChangeType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents type of the configuration change. 
+        			"
+	::= {aiTrapObjectsGroup 103 }
+
+	wlsxTrapApControllerIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            IP address of the controller to which the AP is
+            (or was most recently) registered.
+        			"
+	::= {aiTrapObjectsGroup 104 }
+
+	wlsxTrapApMasterStatus OBJECT-TYPE
+		SYNTAX		ArubaAPMasterStatus
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            Status of the AP as seen by the master when the status changes.
+        			"
+	::= {aiTrapObjectsGroup 105 }
+
+	wlsxTrapCaName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the name of the trustpoint.
+        			"
+	::= {aiTrapObjectsGroup 106 }
+
+	wlsxTrapCrlName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the name of the crl.
+        			"
+	::= {aiTrapObjectsGroup 107 }
+
+	wlsxTrapCount OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the number of occurrence of this trap.
+        			"
+	::= {aiTrapObjectsGroup 108 }
+
+    wlsxTrapAPPreviousUplinkType OBJECT-TYPE
+        SYNTAX      ArubaAPUplinkType
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object specifies the up link type for an AP.
+                    "
+    ::= {aiTrapObjectsGroup 130 }
+
+    wlsxTrapAPPreviousUplinkActiveTime OBJECT-TYPE
+        SYNTAX      TimeTicks
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object specifies the up link type for an AP.
+                    "
+    ::= {aiTrapObjectsGroup 131 }
+
+    wlsxTrapAPActiveUplinkType OBJECT-TYPE
+        SYNTAX      ArubaAPUplinkType
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object specifies the up link type for an AP.
+                    "
+    ::= {aiTrapObjectsGroup 132 }
+
+    wlsxTrapAPUplinkChangeReason OBJECT-TYPE
+        SYNTAX      ArubaAPUplinkChangeReason
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object specifies the up link change reason.
+                    "
+    ::= {aiTrapObjectsGroup 133 }
+
+	wlsxTrapAPManagedModeConfigFailure OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object indicates the error for the failure of config apply on IAP.
+                    "
+    ::= {aiTrapObjectsGroup 138 }
+
+    wlsxTrapAuthServerAddress OBJECT-TYPE 
+        SYNTAX      IpAddress
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object is used in the traps to indicate the
+            Authentication Server IP used for Authentication.
+                    "
+    ::= {aiTrapObjectsGroup 139 }
+
+    wlsxTrapPortalServerName OBJECT-TYPE 
+        SYNTAX      DisplayString(SIZE(0..64))
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object is used in the traps to indicate the
+            Captive Portal Server used for Authentication.
+                    "
+    ::= {aiTrapObjectsGroup 140 }
+
+    wlsxTrapPortalServerAddress OBJECT-TYPE 
+        SYNTAX      DisplayString(SIZE(0..64))
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object is used in the traps to indicate the
+            Captive Portal Server IP or host name used for Authentication.
+                    "
+    ::= {aiTrapObjectsGroup 141 }
+
+    wlsxTrapPortalServerDownReason OBJECT-TYPE 
+        SYNTAX      ArubaPortalServerDownReason
+        MAX-ACCESS  accessible-for-notify
+        STATUS      current
+        DESCRIPTION
+            "
+            This object specifies the captive portal server down reason.
+                    "
+    ::= {aiTrapObjectsGroup 142 }
+
+    wlsxTrapStationBlackListReasonStr OBJECT-TYPE
+        SYNTAX          DisplayString(SIZE(0..32))
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                    "                       
+            This object is used in the traps to indicate the
+            type of Blacklist reason.
+                                "
+    ::= {aiTrapObjectsGroup 144 }
+
+	wlsxTrapAPUSBStatus OBJECT-TYPE
+        SYNTAX          DisplayString(SIZE(0..32))
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                    "                       
+            This object represents plug in or plug out status of an USB device.
+                                "
+    ::= {aiTrapObjectsGroup 147 }
+
+	wlsxTrapUSBVendorProductID OBJECT-TYPE
+        SYNTAX          DisplayString(SIZE(0..32))
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                    "                       
+            This object represents vendor ID or product ID of an USB device.
+                                "
+    ::= {aiTrapObjectsGroup 148 }
+
+     wlsxTrapAuthFailureReason OBJECT-TYPE
+         SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS  accessible-for-notify
+         STATUS      current
+         DESCRIPTION
+                 "           
+                 This object represents the reason for the authentication failure.
+                         "
+    ::= {aiTrapObjectsGroup 155 }
+
+-- Definition of traps
+
+	wlsxNodeRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPBSSID,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a node is exceeding the threshold set for 
+            the frame type.
+        	"
+	::= {aiTrapDefinitionsGroup 1003 }
+
+	wlsxNUserEntryCreated NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a new user was created.
+        	"
+	::= {aiTrapDefinitionsGroup 1014 }
+
+	wlsxNUserEntryDeleted NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user was deleted.
+        	"
+	::= {aiTrapDefinitionsGroup 1015 }
+
+	wlsxNUserEntryAuthenticated NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
+				wlsxTrapUserName,wlsxTrapUserAuthenticationMethod,
+				wlsxTrapUserRole}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user is Authenticated.
+        	"
+	::= {aiTrapDefinitionsGroup 1016 }
+
+	wlsxNUserEntryDeAuthenticated NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user is Deauthenticated.
+        	"
+	::= {aiTrapDefinitionsGroup 1017 }
+
+	wlsxNUserAuthenticationFailed NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user authentication has failed.
+        	"
+	::= {aiTrapDefinitionsGroup 1018 }
+
+	wlsxNAuthServerReqTimedOut NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the authentication server request timed out.
+        	"
+	::= {aiTrapDefinitionsGroup 1019 }
+
+	wlsxNAuthServerTimedOut NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerTimeout}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the authentication server timed out.
+        	"
+	::= {aiTrapDefinitionsGroup 1020 }
+
+	wlsxNAuthServerIsUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName, wlsxTrapAuthServerAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an authentication server is up.
+        	"
+	::= {aiTrapDefinitionsGroup 1021 }
+
+	wlsxNAccessPointIsUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that an access point up.
+        	"
+	::= {aiTrapDefinitionsGroup 1040 }
+
+	wlsxNAccessPointIsDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that an access point down.
+        	"
+	::= {aiTrapDefinitionsGroup 1041 }
+
+	wlsxNChannelChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an access point at Location 
+            wlsxTrapAPLocation has changed the channel.
+        	"
+	::= {aiTrapDefinitionsGroup 1043 }
+
+	wlsxNStationAddedToBlackList NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapStationBlackListReason,
+                                wlsxTrapStationBlackListReasonStr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the station is black listed. 
+        	"
+	::= {aiTrapDefinitionsGroup 1044 }
+
+	wlsxNStationRemovedFromBlackList NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the station is removed from the black list. 
+        	"
+	::= {aiTrapDefinitionsGroup 1045 }
+
+	wlsxNRadioAttributesChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPIpAddress,wlsxTrapAPChannel,
+				wlsxTrapAPTxPower}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates changes in the Radio attributes of an 
+            access point.
+        	"
+	::= {aiTrapDefinitionsGroup 1049 }
+
+	wlsxUnsecureAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel,
+				wlsxTrapMatchedMac,wlsxTrapMatchedIp,
+				wlsxTrapRogueInfoURL}
+		STATUS		current
+		DESCRIPTION
+			"			This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address.  	"
+	::= {aiTrapDefinitionsGroup 1053 }
+
+	wlsxUnsecureAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+                This trap indicates that a previously detected access point, classified as Rogue,
+                is no longer present in the network.
+			"
+	::= {aiTrapDefinitionsGroup 1054 }
+
+	wlsxStaImpersonation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected Station Impersonation.
+			"
+	::= {aiTrapDefinitionsGroup 1055 }
+
+	wlsxReservedChannelViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+				This trap indicates that an AM detected an access point
+				which is violating the Reserved Channel configuration.
+			"
+	::= {aiTrapDefinitionsGroup 1056 }
+
+	wlsxValidSSIDViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected an access point is violating 
+            Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. 
+			"
+	::= {aiTrapDefinitionsGroup 1057 }
+
+	wlsxChannelMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that has a channel misconfiguration 
+            because it is using a channel that is not valid.   
+			"
+	::= {aiTrapDefinitionsGroup 1058 }
+
+	wlsxOUIMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that has an OUI misconfiguration because
+            it is using an OUI that is not valid.
+			"
+	::= {aiTrapDefinitionsGroup 1059 }
+
+	wlsxSSIDMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using
+            an SSID that is not valid.
+			"
+	::= {aiTrapDefinitionsGroup 1060 }
+
+	wlsxShortPreableMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an access point has bad Short preamble
+			configuration.
+			"
+	::= {aiTrapDefinitionsGroup 1061 }
+
+	wlsxWPAMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA.
+			"
+	::= {aiTrapDefinitionsGroup 1062 }
+
+	wlsxAdhocNetworkDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network.
+			"
+	::= {aiTrapDefinitionsGroup 1063 }
+
+	wlsxAdhocNetworkRemoved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that a previously detected Ad hoc Network is no
+            longer present in the network.
+			"
+	::= {aiTrapDefinitionsGroup 1064 }
+
+	wlsxStaPolicyViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy.
+	                "
+	::= {aiTrapDefinitionsGroup 1065 }
+
+	wlsxRepeatWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		    This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets.
+			"
+	::= {aiTrapDefinitionsGroup 1066 }
+
+	wlsxWeakWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector.
+	"
+	::= {aiTrapDefinitionsGroup 1067 }
+
+	wlsxChannelInterferenceDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected channel interference.
+			"
+	::= {aiTrapDefinitionsGroup 1068 }
+
+	wlsxChannelInterferenceCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that a previously detected channel interference
+            is no longer present. 
+			"
+	::= {aiTrapDefinitionsGroup 1069 }
+
+	wlsxAPInterferenceDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected interference for an access point.
+			"
+	::= {aiTrapDefinitionsGroup 1070 }
+
+	wlsxAPInterferenceCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the previously detected interference for an access point
+            is no longer present. 
+			"
+	::= {aiTrapDefinitionsGroup 1071 }
+
+	wlsxStaInterferenceDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected interference for a station.
+			"
+	::= {aiTrapDefinitionsGroup 1072 }
+
+	wlsxStaInterferenceCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the previously detected interference for a station
+            is no longer present. 
+			"
+	::= {aiTrapDefinitionsGroup 1073 }
+
+	wlsxFrameRetryRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
+			"
+	::= {aiTrapDefinitionsGroup 1074 }
+
+	wlsxFrameReceiveErrorRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate.
+			"
+	::= {aiTrapDefinitionsGroup 1075 }
+
+	wlsxFrameFragmentationRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate.
+			"
+	::= {aiTrapDefinitionsGroup 1076 }
+
+	wlsxFrameBandWidthRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate. 
+			"
+	::= {aiTrapDefinitionsGroup 1077 }
+
+	wlsxFrameLowSpeedRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate. 
+			"
+	::= {aiTrapDefinitionsGroup 1078 }
+
+	wlsxFrameNonUnicastRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate. 
+			"
+	::= {aiTrapDefinitionsGroup 1079 }
+
+	wlsxLoadbalancingEnabled NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM is reporting that an AP 
+			has enabled Load balancing.
+			"
+	::= {aiTrapDefinitionsGroup 1080 }
+
+	wlsxLoadbalancingDisabled NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM is reporting that an AP
+			has enabled Load balancing.
+			"
+	::= {aiTrapDefinitionsGroup 1081 }
+
+	wlsxChannelFrameRetryRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel. 
+			"
+	::= {aiTrapDefinitionsGroup 1082 }
+
+	wlsxChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel. 
+			"
+	::= {aiTrapDefinitionsGroup 1083 }
+
+	wlsxChannelFrameErrorRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel. 
+			"
+	::= {aiTrapDefinitionsGroup 1084 }
+
+	wlsxSignatureMatchAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match in a frame from an access point.
+			"
+	::= {aiTrapDefinitionsGroup 1085 }
+
+	wlsxSignatureMatchSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match in a frame from a Station.
+			"
+	::= {aiTrapDefinitionsGroup 1086 }
+
+	wlsxChannelRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected frames on a channel which 
+            exceed the configured IDS rate threshold.
+	"
+	::= {aiTrapDefinitionsGroup 1087 }
+
+	wlsxNodeRateAnomalyAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected frames transmitted or received by an 
+            access point, which exceed the configured IDS rate threshold.
+	"
+	::= {aiTrapDefinitionsGroup 1088 }
+
+	wlsxNodeRateAnomalySta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected frames transmitted or received by a 
+            node, which exceed the configured IDS rate threshold.
+			"
+	::= {aiTrapDefinitionsGroup 1089 }
+
+	wlsxEAPRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the rate of EAP Handshake packets 
+            received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
+	"
+	::= {aiTrapDefinitionsGroup 1090 }
+
+	wlsxSignalAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		    This trap indicates that an AM detected a Signal Anomaly.
+			"
+	::= {aiTrapDefinitionsGroup 1091 }
+
+	wlsxSequenceNumberAnomalyAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM received packets from an AP
+			which exceeds the acceptable sequence number difference. 
+            The acceptable sequence number difference is an IDS configuration 
+            object.
+	"
+	::= {aiTrapDefinitionsGroup 1092 }
+
+	wlsxSequenceNumberAnomalySta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM received packets from a Node
+			which exceeds the acceptable sequence number difference. 
+            The acceptable sequence number difference is an IDS configuration 
+            object.
+	"
+	::= {aiTrapDefinitionsGroup 1093 }
+
+	wlsxDisconnectStationAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a station Disconnect 
+            attack.
+	"
+	::= {aiTrapDefinitionsGroup 1094 }
+
+	wlsxApFloodAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the number of potential fake APs detected by 
+			an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands.
+                        "
+	::= {aiTrapDefinitionsGroup 1095 }
+
+	wlsxAdhocNetwork NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected an Ad hoc 
+			Network. An Station is connected to an ad hoc AP.
+			"
+	::= {aiTrapDefinitionsGroup 1096 }
+
+	wlsxWirelessBridge NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTransmitterMac,wlsxTrapReceiverMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses.
+			"
+	::= {aiTrapDefinitionsGroup 1097 }
+
+	wlsxInvalidMacOUIAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame.  An invalid MAC OUI suggests that the frame may be spoofed.
+			"
+	::= {aiTrapDefinitionsGroup 1098 }
+
+	wlsxInvalidMacOUISta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
+			"
+	::= {aiTrapDefinitionsGroup 1099 }
+
+	wlsxWEPMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled.
+			"
+	::= {aiTrapDefinitionsGroup 1100 }
+
+	wlsxStaRepeatWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets.
+			"
+	::= {aiTrapDefinitionsGroup 1101 }
+
+	wlsxStaWeakWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector.
+			"
+	::= {aiTrapDefinitionsGroup 1102 }
+
+	wlsxStaAssociatedToUnsecureAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel,wlsxTrapRogueInfoURL}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a client associated
+			with a Rogue access point.
+			"
+	::= {aiTrapDefinitionsGroup 1103 }
+
+	wlsxStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that a previously detected rogue access point 
+            association is no longer present.
+			"
+	::= {aiTrapDefinitionsGroup 1104 }
+
+	wlsxAdhocNetworkBridgeDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network that is bridging to a wired network
+			"
+	::= {aiTrapDefinitionsGroup 1105 }
+
+	wlsxInterferingApDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel,
+				wlsxTrapInterferingAPInfoURL}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point classified as Interfering. The access point 
+            is declared Interfering because it is neither authorized or classified as Rogue. 
+			"
+	::= {aiTrapDefinitionsGroup 1106 }
+
+	wlsxColdStart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            An enterprise version of cold start trap, which contains the controller time stamp.
+        	"
+	::= {aiTrapDefinitionsGroup 1111 }
+
+	wlsxWarmStart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            An enterprise version of warm start trap, which contains the controller time stamp.
+        	"
+	::= {aiTrapDefinitionsGroup 1112 }
+
+	wlsxAPImpersonation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold.
+            The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
+			"
+	::= {aiTrapDefinitionsGroup 1113 }
+
+	wlsxNAuthServerIsDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName, wlsxTrapAuthServerAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an authentication server is down.
+        	"
+	::= {aiTrapDefinitionsGroup 1115 }
+
+	wlsxWindowsBridgeDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected a station
+		        that is bridging from a wireless network 
+                        to a wired network
+			"
+	::= {aiTrapDefinitionsGroup 1129 }
+
+	wlsxSignAPNetstumbler NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Netstumbler from an access point.
+	"
+	::= {aiTrapDefinitionsGroup 1134 }
+
+	wlsxSignStaNetstumbler NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Netstumbler from a Station.
+	"
+	::= {aiTrapDefinitionsGroup 1135 }
+
+	wlsxSignAPAsleap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for ASLEAP from an access point.
+	"
+	::= {aiTrapDefinitionsGroup 1136 }
+
+	wlsxSignStaAsleap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for ASLEAP from a Station.
+	"
+	::= {aiTrapDefinitionsGroup 1137 }
+
+	wlsxSignAPAirjack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for AirJack from an access point.
+	"
+	::= {aiTrapDefinitionsGroup 1138 }
+
+	wlsxSignStaAirjack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for AirJack from a Station.
+	"
+	::= {aiTrapDefinitionsGroup 1139 }
+
+	wlsxSignAPNullProbeResp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Null-Probe-Response from an access point.
+	"
+	::= {aiTrapDefinitionsGroup 1140 }
+
+	wlsxSignStaNullProbeResp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station.
+	"
+	::= {aiTrapDefinitionsGroup 1141 }
+
+	wlsxSignAPDeauthBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point.
+	"
+	::= {aiTrapDefinitionsGroup 1142 }
+
+	wlsxSignStaDeauthBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station.
+	"
+	::= {aiTrapDefinitionsGroup 1143 }
+
+	wlsxWindowsBridgeDetectedAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP is detecting an access point that is bridging from a wireless network
+            to a wired network.
+			"
+	::= {aiTrapDefinitionsGroup 1144 }
+
+	wlsxWindowsBridgeDetectedSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP is detecting a station that is bridging from a wireless network
+            to a wired network.
+			"
+	::= {aiTrapDefinitionsGroup 1145 }
+
+	wlsxAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network that is bridging to a wired network
+			"
+	::= {aiTrapDefinitionsGroup 1146 }
+
+	wlsxAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network that is bridging to a wired network
+			"
+	::= {aiTrapDefinitionsGroup 1147 }
+
+	wlsxDisconnectStationAttackAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a station disconnect 
+            attack.
+	"
+	::= {aiTrapDefinitionsGroup 1148 }
+
+	wlsxDisconnectStationAttackSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a station Disconnect 
+            attack.
+	"
+	::= {aiTrapDefinitionsGroup 1149 }
+
+	wlsxSuspectUnsecureAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPRadioNumber,wlsxTrapMatchedMac,
+				wlsxTrapMatchedIp,wlsxTrapConfidenceLevel,
+				wlsxTrapAPLocation,wlsxTrapRogueInfoURL}
+		STATUS		current
+		DESCRIPTION
+			"			This trap indicates that an access point, classified as Suspected Rogue, has been
+                detected by a Controller. The AP is suspected to be rogue, 
+                with the supplied confidence level, because it was matched to 
+                the wired MAC address. 
+			"
+	::= {aiTrapDefinitionsGroup 1150 }
+
+	wlsxSuspectUnsecureAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPRadioNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that a previously detected access point, classified Suspected 
+                Rogue, is either no longer present in the network or
+                has changed its state.
+			"
+	::= {aiTrapDefinitionsGroup 1151 }
+
+	wlsxHtGreenfieldSupported NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+	    This trap indicates that an AP detected an access point that supports HT Greenfield mode.
+	"
+	::= {aiTrapDefinitionsGroup 1157 }
+
+	wlsxHT40MHzIntoleranceAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+	    This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting.
+	"
+	::= {aiTrapDefinitionsGroup 1158 }
+
+	wlsxHT40MHzIntoleranceSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPChannel,wlsxTrapFrameType,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station.
+	"
+	::= {aiTrapDefinitionsGroup 1159 }
+
+	wlsxNAuthServerAllInService NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that all authentication servers is a server group are brought back in service.
+        	"
+	::= {aiTrapDefinitionsGroup 1160 }
+
+	wlsxNAdhocNetwork NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc 
+			network where a station is connected to an ad hoc access point.
+			"
+	::= {aiTrapDefinitionsGroup 1161 }
+
+	wlsxNAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc
+			network that is bridging to a wired network.
+			"
+	::= {aiTrapDefinitionsGroup 1162 }
+
+	wlsxNAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc
+			network that is bridging to a wired network.
+			"
+	::= {aiTrapDefinitionsGroup 1163 }
+
+
+	wlsxClientFloodAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the number of potential fake clients detected by 
+			an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands.
+	"
+	::= {aiTrapDefinitionsGroup 1170 }
+
+	wlsxValidClientNotUsingEncryption NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		    This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point.
+			"
+	::= {aiTrapDefinitionsGroup 1171 }
+
+	wlsxAdhocUsingValidSSID NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc network using a valid/protected SSID.
+	"
+	::= {aiTrapDefinitionsGroup 1172 }
+
+	wlsxAPSpoofingDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapSpoofedFrameType,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing.
+	"
+	::= {aiTrapDefinitionsGroup 1173 }
+
+	wlsxClientAssociatingOnWrongChannel NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapSpoofedFrameType,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel.  This can be a sign that the BSSID is 
+            being spoofed in order to fool the client into thinking the AP is operating on another channel.
+			"
+	::= {aiTrapDefinitionsGroup 1174 }
+
+	wlsxNDisconnectStationAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets
+            received by that client exceeds the configured threshold.
+	"
+	::= {aiTrapDefinitionsGroup 1175 }
+
+	wlsxNStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association.
+			"
+	::= {aiTrapDefinitionsGroup 1176 }
+
+	wlsxOmertaAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an Omerta attack.
+	"
+	::= {aiTrapDefinitionsGroup 1177 }
+
+	wlsxTKIPReplayAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a TKIP replay attack. If successful this could be the precursor to more
+			advanced attacks.
+	"
+	::= {aiTrapDefinitionsGroup 1178 }
+
+	wlsxChopChopAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a ChopChop attack.
+	"
+	::= {aiTrapDefinitionsGroup 1179 }
+
+	wlsxFataJackAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a FATA-Jack attack.
+	"
+	::= {aiTrapDefinitionsGroup 1180 }
+
+	wlsxInvalidAddressCombination NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapAPChannel,
+				wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an invalid source and destination combination.
+	"
+	::= {aiTrapDefinitionsGroup 1181 }
+
+	wlsxValidClientMisassociation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAssociationType,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP.
+			"
+	::= {aiTrapDefinitionsGroup 1182 }
+
+	wlsxMalformedHTIEDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack. 
+			"
+	::= {aiTrapDefinitionsGroup 1183 }
+
+	wlsxMalformedAssocReqDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a malformed association request with a NULL SSID.
+	"
+	::= {aiTrapDefinitionsGroup 1184 }
+
+	wlsxOverflowIEDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. 
+	"
+	::= {aiTrapDefinitionsGroup 1185 }
+
+	wlsxOverflowEAPOLKeyDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message.
+	"
+	::= {aiTrapDefinitionsGroup 1186 }
+
+	wlsxMalformedFrameLargeDurationDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting.
+	"
+	::= {aiTrapDefinitionsGroup 1187 }
+
+	wlsxMalformedFrameWrongChannelDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapTargetAPChannel,wlsxTrapAPChannel,
+				wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP.
+	"
+	::= {aiTrapDefinitionsGroup 1188 }
+
+	wlsxMalformedAuthFrame NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an authentication frame with
+            either a bad algorithm (similar to Fata-Jack) or a bad transaction.
+	"
+	::= {aiTrapDefinitionsGroup 1189 }
+
+	wlsxCTSRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the rate of CTS packets 
+            received by an AP exceeds the configured IDS threshold.
+			"
+	::= {aiTrapDefinitionsGroup 1190 }
+
+	wlsxRTSRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the rate of RTS packets 
+            received by an AP exceeds the configured IDS threshold.
+			"
+	::= {aiTrapDefinitionsGroup 1191 }
+
+	wlsxNRogueAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+				This trap indicates that an unauthorized access point is connected to the wired network. The access point is 
+                classified as Rogue by the system.
+			"
+	::= {aiTrapDefinitionsGroup 1192 }
+
+	wlsxNRogueAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+                This trap indicates that a previously detected access point, classified as Rogue,
+                is either no longer present in the network or it changed its state.
+			"
+	::= {aiTrapDefinitionsGroup 1193 }
+
+	wlsxNeighborAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an access point has been classified as a Neighbor by the system. 
+			"
+	::= {aiTrapDefinitionsGroup 1194 }
+
+	wlsxNInterferingAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an access point has been classified as Interfering by the system. The access point 
+            is declared Interfering because it is not authorized, nor has it been classified as a Rogue. 
+			"
+	::= {aiTrapDefinitionsGroup 1195 }
+
+	wlsxNSuspectRogueAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel,wlsxTrapConfidenceLevel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that an access point, classified as Suspected Rogue, is 
+                detected by the system. The AP is suspected to be rogue 
+                with the supplied confidence level. 
+			"
+	::= {aiTrapDefinitionsGroup 1196 }
+
+	wlsxNSuspectRogueAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that a previously detected access point, classified as Suspected 
+                Rogue, is either no longer present in the network or
+                has changed its state.
+			"
+	::= {aiTrapDefinitionsGroup 1197 }
+
+	wlsxBlockAckAttackDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+        This trap indicates that an attempt has been made to deny service to
+        the source address by spoofing a block ACK add request that sets a
+        sequence number window outside the currently used window.
+	"
+	::= {aiTrapDefinitionsGroup 1198 }
+
+	wlsxHotspotterAttackDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapNodeMac,
+				wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr,
+				wlsxTrapTargetAPSSID}
+		STATUS		current
+		DESCRIPTION
+			"			
+        This trap indicates that a new AP has appeared immediately following a client probe request.
+        This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake
+        hotspot or other wireless network.
+	"
+	::= {aiTrapDefinitionsGroup 1199 }
+
+	wlsxNSignatureMatch NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match in a frame.
+			"
+	::= {aiTrapDefinitionsGroup 1200 }
+
+	wlsxNSignatureMatchNetstumbler NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Netstumbler in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1201 }
+
+	wlsxNSignatureMatchAsleap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for ASLEAP in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1202 }
+
+	wlsxNSignatureMatchAirjack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Airjack in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1203 }
+
+	wlsxNSignatureMatchNullProbeResp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1204 }
+
+	wlsxNSignatureMatchDeauthBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1205 }
+
+	wlsxNSignatureMatchDisassocBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1206 }
+
+	wlsxNSignatureMatchWellenreiter NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Wellenreiter in a frame.
+	"
+	::= {aiTrapDefinitionsGroup 1207 }
+
+	wlsxAPDeauthContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapAPChannel,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by disconnecting its client.
+      	"
+	::= {aiTrapDefinitionsGroup 1208 }
+
+	wlsxClientDeauthContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with.
+      	"
+	::= {aiTrapDefinitionsGroup 1209 }
+
+	wlsxAPWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
+      	"
+	::= {aiTrapDefinitionsGroup 1210 }
+
+	wlsxClientWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
+      	"
+	::= {aiTrapDefinitionsGroup 1211 }
+
+	wlsxAPTaggedWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapVlanId,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
+      	"
+	::= {aiTrapDefinitionsGroup 1212 }
+
+	wlsxClientTaggedWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapVlanId,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
+      	"
+	::= {aiTrapDefinitionsGroup 1213 }
+
+	wlsxTarpitContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapAPChannel,wlsxTrapTargetAPChannel,
+				wlsxTrapSourceMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit.
+      	"
+	::= {aiTrapDefinitionsGroup 1214 }
+
+	wlsxAPChannelChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPChannel,wlsxTrapAPChannelSec,
+				wlsxTrapAPPrevChannel,wlsxTrapAPPrevChannelSec,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPARMChangeReason}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP changed its channel.
+      	"
+	::= {aiTrapDefinitionsGroup 1216 }
+
+	wlsxAPPowerChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPTxPower,wlsxTrapAPPrevTxPower,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP changed its transmit power level.
+      	"
+	::= {aiTrapDefinitionsGroup 1217 }
+
+	wlsxAPModeChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPCurMode,wlsxTrapAPPrevMode,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
+      	"
+	::= {aiTrapDefinitionsGroup 1218 }
+
+	wlsxUserEntryAttributesChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
+				wlsxTrapAPBSSID,wlsxTrapAPName,
+				wlsxTrapCardSlot,wlsxTrapPortNumber,
+				wlsxTrapUserAttributeChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the user entry attributes have changed.
+        	"
+	::= {aiTrapDefinitionsGroup 1219 }
+
+	wlsxPowerSaveDosAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a Power Save DoS attack.
+			"
+	::= {aiTrapDefinitionsGroup 1220 }
+
+	wlsxNAPMasterStatusChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapApControllerIp,
+				wlsxTrapApMasterStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the status of the AP as seen by
+            the master controller has changed.
+        	"
+	::= {aiTrapDefinitionsGroup 1221 }
+
+	wlsxNAdhocUsingValidSSID NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID.
+	"
+	::= {aiTrapDefinitionsGroup 1222 }
+
+	wlsxMgmtUserAuthenticationFailed NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
+                wlsxTrapAuthServerAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a management user authentication has failed.
+        	"
+	::= {aiTrapDefinitionsGroup 1224 }
+
+    wlsxAPActiveUplinkChanged NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPPreviousUplinkType,
+                wlsxTrapAPPreviousUplinkActiveTime,wlsxTrapAPActiveUplinkType,
+                wlsxTrapAPUplinkChangeReason}
+        STATUS      current
+        DESCRIPTION
+            "
+              When the active uplink of an AP changes, a notification is
+              sent to the Management Entity with the new uplink type
+            "
+    ::= {aiTrapDefinitionsGroup 1252 }
+
+    wlsxAPManagedModeConfigFailureTrap NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapAPManagedModeConfigFailure}
+        STATUS      current
+        DESCRIPTION
+            "
+              Indicated failure in applying config.
+            "
+    ::= {aiTrapDefinitionsGroup 1255 }
+
+    wlsxNAuthServerAcctTimedOut NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
+				wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
+				wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+         This trap indicates that the authentication server accounting timed out.
+        	"
+	::= {aiTrapDefinitionsGroup 1256 }
+
+    wlsxPortalServerDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPortalServerName, wlsxTrapPortalServerAddress,
+				wlsxTrapAPName,wlsxTrapPortalServerDownReason}
+		STATUS		current
+		DESCRIPTION
+			"			
+         This trap indicates that the portal server is down.
+        	"
+	::= {aiTrapDefinitionsGroup 1259 }
+
+    wlsxPortalServerUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPortalServerName, wlsxTrapPortalServerAddress,
+				wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+         This trap indicates that the portal server is up.
+        	"
+	::= {aiTrapDefinitionsGroup 1260 }
+
+    wlsxIAPVoiceClientLocationUpdate NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVcIpAddress, wlsxTrapVcMacAddress,
+				wlsxTrapAPMacAddress, wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+         The trap represents a IAP voice client location update.
+        	"
+	::= {aiTrapDefinitionsGroup 1262 }
+
+    wlsxWPAFTAttack NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+                wlsxTrapAPLocation,wlsxTrapNodeMac,
+                wlsxTrapAPChannel,wlsxTrapTargetAPBSSID}
+        STATUS      current
+        DESCRIPTION
+            "
+        This trap indicates there is a possible attack of the Fast BSS Transition causing a WPA key re-installation.
+        This can be indicative of a security breach where an attacker can hijack a client's association and/or
+        decrypt an otherwise secure connection.
+            "
+    ::= {aiTrapDefinitionsGroup 1267 }
+
+    wlsxMitMDetected NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapAPLocation,wlsxTrapAPMacAddress,
+                wlsxTrapAPRadioNumber,wlsxTrapSourceMac,
+                wlsxTrapTargetAPBSSID,wlsxTrapAPChannel,
+                wlsxTrapSnr}
+        STATUS      current
+        DESCRIPTION
+            "
+        This trap indicates that an AP detected a possible channel-based Man in the Middle attack by someone using spoofed beacons with an invalid Channel Switch Announcement.
+            "
+    ::= {aiTrapDefinitionsGroup 1268 }
+
+    wlsxAPLoopDetected NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+                wlsxTrapPortNumber}
+        STATUS      current
+        DESCRIPTION
+            "           
+            This trap indicates that loop is detected on AP's secure jack port.
+            "
+    ::= {aiTrapDefinitionsGroup 1271 }
+
+    wlsxAPBROADCASTSTORM NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+                wlsxTrapPortNumber}
+        STATUS      current
+        DESCRIPTION
+            "           
+            This trap indicates that broadcast storm is detected on AP's secure jack port.
+            "
+    ::= {aiTrapDefinitionsGroup 1272 }
+
+	wlsxCLEARPASSSERVERINVALID NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that clearpass server is not valid when using the CA to verity the server for download-role.
+        	"
+	::= {aiTrapDefinitionsGroup 1274 }
+
+	wlsxAPUSBPLUGALARM NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,wlsxTrapUSBVendorProductID,wlsxTrapUSBVendorProductID,wlsxTrapAPUSBStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an USB device is plugged in or out to an AP.
+        	"
+	::= {aiTrapDefinitionsGroup 1277 }
+
+    wlsxClientRejectedByMaxClientCount NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapUserPhyAddress,wlsxTrapAPBSSID,
+                wlsxTrapAPMacAddress,wlsxTrapAPName,
+                wlsxTrapEssid}
+        STATUS      current
+        DESCRIPTION
+            "           
+            This trap indicates the client is rejected by the max client count.
+            "
+    ::= {aiTrapDefinitionsGroup 1284 }
+  
+    wlsxClientPskAuthenticationFailed NOTIFICATION-TYPE
+        OBJECTS {wlsxTrapTime, wlsxTrapUserPhyAddress,wlsxTrapAuthFailureReason,
+                wlsxTrapAPBSSID,wlsxTrapAPMacAddress,wlsxTrapAPName,
+                wlsxTrapEssid}
+        STATUS      current
+        DESCRIPTION
+            "           
+            This trap indicates the client PSK Authentication Failed.
+            "
+    ::= {aiTrapDefinitionsGroup 1285 }
+
+END
diff --git a/MIBS/arubaos/ARUBA-MGMT-MIB b/MIBS/arubaos/ARUBA-MGMT-MIB
new file mode 100644
index 0000000..3a7b6bc
--- /dev/null
+++ b/MIBS/arubaos/ARUBA-MGMT-MIB
@@ -0,0 +1,157 @@
+--- ArubaOS 8.8.0.1_80393
+-- ***********************************************************
+--  ARUBA-MGMT-MIB
+--
+-- ************************************************************
+--
+
+ARUBA-MGMT-MIB DEFINITIONS ::= BEGIN
+
+	IMPORTS
+    		MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
+    		ObjectName, Integer32, Counter32, snmpModules
+                    FROM SNMPv2-SMI
+                TruthValue, DisplayString, TestAndIncr, TimeStamp,
+				PhysAddress
+                    FROM SNMPv2-TC
+--              TEXTUAL-CONVENTION, RowStatus, TimeStamp
+--                  FROM SNMPv2-TC
+
+	   			ArubaEnableValue
+	   				FROM ARUBA-TC
+				arubaMgmt
+					FROM ARUBA-MIB
+
+    		MODULE-COMPLIANCE, OBJECT-GROUP
+                    FROM SNMPv2-CONF;
+
+
+--  The arubaMgmtMIB is derived from the Aruba Enterprise MIB 
+--  branch under aruba.arubaMgmt as 
+--  defined under. The absolute path from root is : 
+--  .iso 
+--   .org.dod                                   
+--    .internet.private.enterprises
+--     .aruba.arubaMgmt
+--                        
+
+    arubaMgmtExtensions MODULE-IDENTITY
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+    DESCRIPTION
+            "A MIB module for supporting the Aruba Management 
+			 Protocol. This protocol is an extension to SNMP."
+    ::= { arubaMgmt  3 } 
+
+ 	arubaMgmtGroup		OBJECT IDENTIFIER ::= {arubaMgmtExtensions 1}
+
+-- arubaMgmtGroup begin 
+
+      arubaGetTable OBJECT-TYPE
+         SYNTAX       OBJECT IDENTIFIER
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The object is used in the Aruba Management Protocol.
+			In a GET Table request the instance of the object
+			will contain the Table/Entry OID to be retrieved.
+			The value of the object in a GET Table response is the 
+			table OID or Entry OID.
+			A Get request on this object returns <0.0>.
+            "
+        ::= { arubaMgmtGroup 1 }
+
+     arubaNumberOfRows OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The object is used in the Aruba Management Protocol.
+			This Object is used to specify the number of Objects 
+			to be retrieved in a GET Table request. Instance 
+			of the Object will contain the number of Rows.
+			In the Response to the GET Table this object will
+			contain the number of Objects returned in the response.
+			A Get request on this object returns 0.
+            "
+        ::= { arubaMgmtGroup 2 }
+
+
+     arubaRowInstance OBJECT-TYPE
+         SYNTAX       OBJECT IDENTIFIER
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The object is used in the Aruba Management Protocol.
+			This Object is used to specify the Row Instance
+			in the GET Table Request. The response will start from the
+			Next Row. Instance of the Object is the row instance of the
+			request.
+			In the Response to the GET Table this object will
+			contain the Instance of Last row included in the response.
+			A Get request on this object returns <0.0> .
+            "
+        ::= { arubaMgmtGroup 3 }
+
+     arubaGetTableStatus OBJECT-TYPE
+         SYNTAX       INTEGER{
+							endTable(1),
+							moreTable(2),
+							retrieveError(3),
+							noAmpSupport(4),
+							invalidColumnID(5),
+							resourceAllocationFailure(6)
+					 }
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The object is used in the Aruba Management Protocol.
+			This Object is used to give the status of the GetTable
+			request. 
+			endTable -- indicates that there are no more rows in 
+						the table.
+			moreTable -- indicates that there are some more rows 
+						 in the table.
+			retrieveError -- indicates an error occurred while
+							processing the getTable request.
+							(Will be expanded ).
+			A Get request on this object returns 0 .
+            "
+        ::= { arubaMgmtGroup 4 }
+
+     arubaNumberOfColumns OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The object is used in the Aruba Management Protocol.
+			This Object is used to specify the number of Columns
+			per row in the Get Table Response.
+			A Get request on this object returns 0.
+            "
+        ::= { arubaMgmtGroup 5 }
+
+     arubaSwitchAMPSupport OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The object is used in the Aruba Management Protocol.
+			This Object is used to specify the number of Columns
+			per row in the Get Table Response.
+			A Get request on this object returns 0.
+            "
+        ::= { arubaMgmtGroup 6 }
+END
diff --git a/MIBS/arubaos/ARUBA-MIB b/MIBS/arubaos/ARUBA-MIB
new file mode 100644
index 0000000..c3f6005
--- /dev/null
+++ b/MIBS/arubaos/ARUBA-MIB
@@ -0,0 +1,623 @@
+--- ArubaOS 8.8.0.1_80393
+ARUBA-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE,
+       OBJECT-IDENTITY,
+	   enterprises,
+       snmpModules                           FROM SNMPv2-SMI
+       TEXTUAL-CONVENTION                    FROM SNMPv2-TC
+       MODULE-COMPLIANCE, OBJECT-GROUP       FROM SNMPv2-CONF;
+
+
+-- The top node
+
+aruba  OBJECT IDENTIFIER ::= { enterprises 14823 }
+
+-- Node Product will contain all the products from Aruba Networks.
+
+products OBJECT IDENTIFIER ::= { aruba 1}
+
+-- Node arubaEnterpriseMibModules contains all the Enterprise
+-- specific MIBS supported by Aruba Networks products.
+
+arubaEnterpriseMibModules OBJECT IDENTIFIER ::= { aruba 2}
+
+-- Node arubaMgmtGroup defines the objects related to the Aruba Management 
+-- Extensions.
+
+arubaMgmt OBJECT IDENTIFIER ::= { aruba 3}
+
+--Node arubaPki.
+arubaPki OBJECT-IDENTITY
+       STATUS  current
+       DESCRIPTION
+            "Aruba PKI OIDs. This arc is not used in Aruba SNMP MIBs."
+    ::= { aruba  4}
+
+-- List of all the products.
+
+-- Switch Products
+switchProducts OBJECT IDENTIFIER ::= { products 1}
+
+-- a5000 product , this object is the SYSOID
+
+a5000 OBJECT IDENTIFIER ::= { switchProducts 1}
+
+-- a2400 product , this object is the SYSOID
+
+a2400 OBJECT IDENTIFIER ::= { switchProducts 2}
+
+-- a800 product , this object is the SYSOID
+
+a800 OBJECT IDENTIFIER ::= { switchProducts 3}
+
+-- a6000 product , this object is the SYSOID
+
+a6000 OBJECT IDENTIFIER ::= { switchProducts 4}
+
+-- a2400E product , this object is the SYSOID
+
+a2400E OBJECT IDENTIFIER ::= { switchProducts 7}
+
+-- a800-E product , this object is the SYSOID
+
+a800E OBJECT IDENTIFIER ::= { switchProducts 8}
+
+-- a800-4 product , this object is the SYSOID
+
+a804 OBJECT IDENTIFIER ::= { switchProducts 9}
+
+-- a200 product , this object is the SYSOID
+
+a200 OBJECT IDENTIFIER ::= { switchProducts 10}
+
+-- a2400-24 product , this object is the SYSOID
+
+a2424 OBJECT IDENTIFIER ::= { switchProducts 11}
+
+-- a6000-SC3 (nebbiolo) product , this object is the SYSOID
+
+a6000-SC3 OBJECT IDENTIFIER ::= { switchProducts 12}
+
+a3200 OBJECT IDENTIFIER ::= { switchProducts 13}
+a3200-8 OBJECT IDENTIFIER ::= { switchProducts 14}
+
+a3400 OBJECT IDENTIFIER ::= { switchProducts 15}
+a3400-32 OBJECT IDENTIFIER ::= { switchProducts 16}
+
+a3600 OBJECT IDENTIFIER ::= { switchProducts 17}
+
+a3600-64 OBJECT IDENTIFIER ::= { switchProducts 18}
+
+a650 OBJECT IDENTIFIER ::= { switchProducts 19}
+a651 OBJECT IDENTIFIER ::= { switchProducts 20}
+reserved1 OBJECT IDENTIFIER ::= { switchProducts 21}
+reserved2 OBJECT IDENTIFIER ::= { switchProducts 22}
+a620 OBJECT IDENTIFIER ::= { switchProducts 23}
+
+s3500-24P   OBJECT IDENTIFIER ::= { switchProducts 24 }
+s3500-24T   OBJECT IDENTIFIER ::= { switchProducts 25 }
+s3500-48P   OBJECT IDENTIFIER ::= { switchProducts 26 }
+s3500-48T   OBJECT IDENTIFIER ::= { switchProducts 27 }
+
+s2500-24P   OBJECT IDENTIFIER ::= { switchProducts 28 }
+s2500-24T   OBJECT IDENTIFIER ::= { switchProducts 29 }
+s2500-48P   OBJECT IDENTIFIER ::= { switchProducts 30 }
+s2500-48T   OBJECT IDENTIFIER ::= { switchProducts 31 }
+
+a7210   OBJECT IDENTIFIER ::= { switchProducts 32 }
+a7220   OBJECT IDENTIFIER ::= { switchProducts 33 }
+a7240   OBJECT IDENTIFIER ::= { switchProducts 34 }
+
+s3500-24F   OBJECT IDENTIFIER ::= { switchProducts 35 }
+
+s1500-48P   OBJECT IDENTIFIER ::= { switchProducts 36 }
+s1500-24P   OBJECT IDENTIFIER ::= { switchProducts 37 }
+s1500-12P   OBJECT IDENTIFIER ::= { switchProducts 38 }
+
+a7005   OBJECT IDENTIFIER ::= { switchProducts 39 }
+a7010   OBJECT IDENTIFIER ::= { switchProducts 40 }
+a7030   OBJECT IDENTIFIER ::= { switchProducts 41 }
+a7205   OBJECT IDENTIFIER ::= { switchProducts 42 }
+a7024   OBJECT IDENTIFIER ::= { switchProducts 43 }
+a7215   OBJECT IDENTIFIER ::= { switchProducts 44 }
+vmc-tact   OBJECT IDENTIFIER ::= { switchProducts 45 }
+vmc-sp10k   OBJECT IDENTIFIER ::= { switchProducts 46 }
+a7240xm OBJECT IDENTIFIER ::= { switchProducts 47 }
+a7008   OBJECT IDENTIFIER ::= { switchProducts 48 }
+vmc-tact8   OBJECT IDENTIFIER ::= { switchProducts 49 }
+mm-va   OBJECT IDENTIFIER ::= { switchProducts 50 }
+a7280   OBJECT IDENTIFIER ::= { switchProducts 51 }
+mc-va   OBJECT IDENTIFIER ::= { switchProducts 52 }
+mm-hw-1K   OBJECT IDENTIFIER ::= { switchProducts 53 }
+mm-hw-5K   OBJECT IDENTIFIER ::= { switchProducts 54 }
+mm-hw-10K   OBJECT IDENTIFIER ::= { switchProducts 55 }
+a9004   OBJECT IDENTIFIER ::= { switchProducts 56 }
+a9012   OBJECT IDENTIFIER ::= { switchProducts 57 }
+a9004-lte   OBJECT IDENTIFIER ::= { switchProducts 58 }
+
+
+--Undefined switch.
+aUndefined OBJECT IDENTIFIER ::= { switchProducts 9999}
+
+-- Access Point Products
+apProducts OBJECT IDENTIFIER ::= { products 2}
+
+-- a50 , this object is the SYSOID
+
+a50 OBJECT IDENTIFIER ::= {apProducts 1}
+
+-- a52 , this object is the SYSOID
+
+a52 OBJECT IDENTIFIER ::= {apProducts 2}
+
+-- a60 , this object is the SYSOID
+
+ap60 OBJECT IDENTIFIER ::= {apProducts 3}
+
+-- a61 , this object is the SYSOID
+
+ap61 OBJECT IDENTIFIER ::= {apProducts 4}
+
+-- a70 , this object is the SYSOID
+
+ap70 OBJECT IDENTIFIER ::= {apProducts 5}
+
+-- walljackAp61, this object is the SYSOID
+
+walljackAp61 OBJECT IDENTIFIER ::= {apProducts 6}
+
+-- a2E, this object is the SYSOID
+
+a2E OBJECT IDENTIFIER ::= {apProducts 7}
+
+-- ap1200, this object is the SYSOID
+
+ap1200 OBJECT IDENTIFIER ::= {apProducts 8}
+
+-- ap80s, this object is the SYSOID
+
+ap80s OBJECT IDENTIFIER ::= {apProducts 9}
+
+-- ap80m, this object is the SYSOID
+
+ap80m OBJECT IDENTIFIER ::= {apProducts 10}
+
+-- wg102, this object is the SYSOID
+
+wg102 OBJECT IDENTIFIER ::= {apProducts 11}
+
+-- ap40, this object is the SYSOID
+
+ap40 OBJECT IDENTIFIER ::= {apProducts 12}
+
+-- ap41, this object is the SYSOID
+
+ap41 OBJECT IDENTIFIER ::= {apProducts 13}
+
+-- ap65, this object is the SYSOID
+
+ap65 OBJECT IDENTIFIER ::= {apProducts 14}
+
+-- NesotMW1700
+apMw1700 OBJECT IDENTIFIER ::= {apProducts 15}
+
+-- ortronics Wi Jack Duo
+apDuowj OBJECT IDENTIFIER ::= {apProducts 16}
+
+-- ortronics Duo
+apDuo OBJECT IDENTIFIER ::= {apProducts 17}
+
+--ap80MB, this object is the SYSOID 
+
+ap80MB OBJECT IDENTIFIER ::= {apProducts 18}
+
+--ap80SB, this object is the SYSOID
+
+ap80SB OBJECT IDENTIFIER ::= {apProducts 19}
+
+--ap85, this object is the SYSOID
+
+ap85 OBJECT IDENTIFIER ::= {apProducts 20}
+
+--ap124, this object is the SYSOID
+
+ap124 OBJECT IDENTIFIER ::= {apProducts 21}
+
+--ap125, this object is the SYSOID
+
+ap125 OBJECT IDENTIFIER ::= {apProducts 22}
+
+--ap120, this object is the SYSOID
+
+ap120 OBJECT IDENTIFIER ::= {apProducts 23}
+
+--ap121, this object is the SYSOID
+
+ap121 OBJECT IDENTIFIER ::= {apProducts 24}
+
+--ap1250, this object is the SYSOID
+
+ap1250 OBJECT IDENTIFIER ::= {apProducts 25}
+
+--ap120abg, this object is the SYSOID
+
+ap120abg OBJECT IDENTIFIER ::= {apProducts 26}
+
+--ap121abg, this object is the SYSOID
+
+ap121abg OBJECT IDENTIFIER ::= {apProducts 27}
+
+--ap124abg, this object is the SYSOID
+
+ap124abg OBJECT IDENTIFIER ::= {apProducts 28}
+
+--ap125abg, this object is the SYSOID
+
+ap125abg OBJECT IDENTIFIER ::= {apProducts 29}
+
+-- rap5wn, this object is the SYSOID
+
+rap5wn OBJECT IDENTIFIER ::= {apProducts 30}
+
+-- rap5, this object is the SYSOID
+
+rap5 OBJECT IDENTIFIER ::= {apProducts 31}
+
+-- rap2wg, this object is the SYSOID
+
+rap2wg OBJECT IDENTIFIER ::= {apProducts 32}
+
+--reserved-4, this object is the SYSOID
+
+reserved4 OBJECT IDENTIFIER ::= {apProducts 33}
+
+--ap105, this object is the SYSOID
+
+ap105 OBJECT IDENTIFIER ::= {apProducts 34}
+
+--ap65wb, this object is the SYSOID
+
+ap65wb OBJECT IDENTIFIER ::= {apProducts 35}
+
+--ap651, this object is the SYSOID
+
+ap651 OBJECT IDENTIFIER ::= {apProducts 36}
+
+--reserved-6, this object is the SYSOID
+
+reserved6 OBJECT IDENTIFIER ::= {apProducts 37}
+
+--ap60p, this object is the SYSOID
+
+ap60p OBJECT IDENTIFIER ::= {apProducts 38}
+
+--reserved-7, this object is the SYSOID
+
+reserved7 OBJECT IDENTIFIER ::= {apProducts 39}
+
+--ap92, this object is the SYSOID
+
+ap92 OBJECT IDENTIFIER ::= {apProducts 40}
+
+--ap93, this object is the SYSOID
+
+ap93 OBJECT IDENTIFIER ::= {apProducts 41}
+
+--ap68, this object is the SYSOID
+
+ap68 OBJECT IDENTIFIER ::= {apProducts 42}
+
+--ap68p, this object is the SYSOID
+
+ap68p OBJECT IDENTIFIER ::= {apProducts 43}
+
+--ap175p, this object is the SYSOID
+
+ap175p OBJECT IDENTIFIER ::= {apProducts 44}
+
+--ap175ac, this object is the SYSOID
+
+ap175ac OBJECT IDENTIFIER ::= {apProducts 45}
+
+--ap175dc, this object is the SYSOID
+
+ap175dc OBJECT IDENTIFIER ::= {apProducts 46}
+
+--ap134, this object is the SYSOID
+
+ap134 OBJECT IDENTIFIER ::= {apProducts 47}
+
+--ap135, this object is the SYSOID
+
+ap135 OBJECT IDENTIFIER ::= {apProducts 48}
+
+--reserved-8, this object is the SYSOID
+
+reserved8 OBJECT IDENTIFIER ::= {apProducts 49}
+
+--ap93h, this object is the SYSOID
+
+ap93h OBJECT IDENTIFIER ::= {apProducts 50}
+
+--rap3wn, this object is the SYSOID
+
+rap3wn OBJECT IDENTIFIER ::= {apProducts 51}
+
+--rap3wnp, this object is the SYSOID
+
+rap3wnp OBJECT IDENTIFIER ::= {apProducts 52}
+
+--ap104, this object is the SYSOID
+
+ap104 OBJECT IDENTIFIER ::= {apProducts 53}
+
+--rap155, this object is the SYSOID
+rap155 OBJECT IDENTIFIER ::= {apProducts 54}
+
+--rap155p, this object is the SYSOID
+rap155p OBJECT IDENTIFIER ::= {apProducts 55}
+
+--rap108, this object is the SYSOID
+rap108 OBJECT IDENTIFIER ::= {apProducts 56}
+
+--rap109, this object is the SYSOID
+rap109 OBJECT IDENTIFIER ::= {apProducts 57}
+
+--ap224, this object is the SYSOID
+ap224 OBJECT IDENTIFIER ::= {apProducts 58}
+
+--ap225, this object is the SYSOID
+ap225 OBJECT IDENTIFIER ::= {apProducts 59}
+
+--ap114, this object is the SYSOID
+ap114 OBJECT IDENTIFIER ::= {apProducts 60}
+
+--ap115, this object is the SYSOID
+ap115 OBJECT IDENTIFIER ::= {apProducts 61}
+
+--rap109L, this object is the SYSOID
+rap109L OBJECT IDENTIFIER ::= {apProducts 62}
+
+--ap274, this object is the SYSOID
+ap274 OBJECT IDENTIFIER ::= {apProducts 63}
+
+--ap275, this object is the SYSOID
+ap275 OBJECT IDENTIFIER ::= {apProducts 64}
+
+--ap214a, this object is the SYSOID
+ap214a OBJECT IDENTIFIER ::= {apProducts 65}
+
+--ap215a, this object is the SYSOID
+ap215a OBJECT IDENTIFIER ::= {apProducts 66}
+
+--ap204, this object is the SYSOID
+ap204 OBJECT IDENTIFIER ::= {apProducts 67}
+
+--ap205, this object is the SYSOID
+ap205 OBJECT IDENTIFIER ::= {apProducts 68}
+
+--ap103, this object is the SYSOID
+ap103 OBJECT IDENTIFIER ::= {apProducts 69}
+
+--ap103H, this object is the SYSOID
+ap103H OBJECT IDENTIFIER ::= {apProducts 70}
+
+--iapvc, this object is the SYSOID
+iapvc OBJECT IDENTIFIER ::= {apProducts 71}
+
+--ap277, this object is the SYSOID
+ap277 OBJECT IDENTIFIER ::= {apProducts 72}
+
+--ap214, this object is the SYSOID
+ap214 OBJECT IDENTIFIER ::= {apProducts 73}
+
+--ap215, this object is the SYSOID
+ap215 OBJECT IDENTIFIER ::= {apProducts 74}
+
+--ap228, this object is the SYSOID
+ap228 OBJECT IDENTIFIER ::= {apProducts 75}
+
+--ap205H, this object is the SYSOID
+ap205H OBJECT IDENTIFIER ::= {apProducts 76}
+
+--ap324, this object is the SYSOID
+ap324 OBJECT IDENTIFIER ::= {apProducts 77}
+
+--ap325, this object is the SYSOID
+ap325 OBJECT IDENTIFIER ::= {apProducts 78}
+
+--ap334, this object is the SYSOID
+ap334 OBJECT IDENTIFIER ::= {apProducts 79}
+
+--ap335, this object is the SYSOID
+ap335 OBJECT IDENTIFIER ::= {apProducts 80}
+
+--ap314, this object is the SYSOID
+ap314 OBJECT IDENTIFIER ::= {apProducts 81}
+
+--ap315, this object is the SYSOID
+ap315 OBJECT IDENTIFIER ::= {apProducts 82}
+
+--apm210, this object is the SYSOID
+apm210 OBJECT IDENTIFIER ::= {apProducts 83}
+
+--ap207, this object is the SYSOID
+ap207 OBJECT IDENTIFIER ::= {apProducts 84}
+
+--ap304, this object is the SYSOID
+ap304 OBJECT IDENTIFIER ::= {apProducts 85}
+
+--ap305, this object is the SYSOID
+ap305 OBJECT IDENTIFIER ::= {apProducts 86}
+
+--ap303h, this object is the SYSOID
+ap303h OBJECT IDENTIFIER ::= {apProducts 87}
+
+--ap365, this object is the SYSOID
+ap365 OBJECT IDENTIFIER ::= {apProducts 88}
+
+--ap367, this object is the SYSOID
+ap367 OBJECT IDENTIFIER ::= {apProducts 89}
+
+
+--ap203H, this object is the SYSOID
+ap203H OBJECT IDENTIFIER ::= {apProducts 90}
+
+--ap203R, this object is the SYSOID
+ap203R OBJECT IDENTIFIER ::= {apProducts 91}
+
+--ap203RP, this object is the SYSOID
+ap203RP OBJECT IDENTIFIER ::= {apProducts 92}
+
+--ap344, this object is the SYSOID
+ap344 OBJECT IDENTIFIER ::= {apProducts 93}
+
+--ap345, this object is the SYSOID
+ap345 OBJECT IDENTIFIER ::= {apProducts 94}
+
+--ap374, this object is the SYSOID
+ap374 OBJECT IDENTIFIER ::= {apProducts 95}
+
+--ap375, this object is the SYSOID
+ap375 OBJECT IDENTIFIER ::= {apProducts 96}
+
+--ap377, this object is the SYSOID
+ap377 OBJECT IDENTIFIER ::= {apProducts 97}
+
+--ap318, this object is the SYSOID
+ap318 OBJECT IDENTIFIER ::= {apProducts 98}
+
+--ap303, this object is the SYSOID
+ap303 OBJECT IDENTIFIER ::= {apProducts 99}
+
+--ap555, this object is the SYSOID
+ap555 OBJECT IDENTIFIER ::= {apProducts 100}
+
+--ap534, this object is the SYSOID
+ap534 OBJECT IDENTIFIER ::= {apProducts 101}
+
+--ap535, this object is the SYSOID
+ap535 OBJECT IDENTIFIER ::= {apProducts 102}
+
+--ap387, this object is the SYSOID
+ap387 OBJECT IDENTIFIER ::= {apProducts 104}
+
+--ap303P, this object is the SYSOID
+ap303P OBJECT IDENTIFIER ::= {apProducts 105}
+
+--ap514, this object is the SYSOID
+ap514 OBJECT IDENTIFIER ::= {apProducts 106}
+
+--ap515, this object is the SYSOID
+ap515 OBJECT IDENTIFIER ::= {apProducts 107}
+
+--ap544, this object is the SYSOID
+ap544 OBJECT IDENTIFIER ::= {apProducts 108}
+
+--ap545, this object is the SYSOID
+ap545 OBJECT IDENTIFIER ::= {apProducts 109}
+
+--ap504, this object is the SYSOID
+ap504 OBJECT IDENTIFIER ::= {apProducts 110}
+
+--ap505, this object is the SYSOID
+ap505 OBJECT IDENTIFIER ::= {apProducts 111}
+
+--ap505H, this object is the SYSOID
+ap505H OBJECT IDENTIFIER ::= {apProducts 112}
+
+--ap574, this object is the SYSOID
+ap574 OBJECT IDENTIFIER ::= {apProducts 113}
+
+--ap575, this object is the SYSOID
+ap575 OBJECT IDENTIFIER ::= {apProducts 114}
+
+--ap577, this object is the SYSOID
+ap577 OBJECT IDENTIFIER ::= {apProducts 115}
+
+--ap518, this object is the SYSOID
+ap518 OBJECT IDENTIFIER ::= {apProducts 116}
+
+--ap503H, this object is the SYSOID
+ap503H OBJECT IDENTIFIER ::= {apProducts 117}
+
+--ap565, this object is the SYSOID
+ap565 OBJECT IDENTIFIER ::= {apProducts 118}
+
+--ap567, this object is the SYSOID
+ap567 OBJECT IDENTIFIER ::= {apProducts 119}
+
+--ap575EX, this object is the SYSOID
+ap575EX OBJECT IDENTIFIER ::= {apProducts 120}
+
+--ap577EX, this object is the SYSOID
+ap577EX OBJECT IDENTIFIER ::= {apProducts 121}
+
+--ap565EX, this object is the SYSOID
+ap565EX OBJECT IDENTIFIER ::= {apProducts 122}
+
+--ap567EX, this object is the SYSOID
+ap567EX OBJECT IDENTIFIER ::= {apProducts 123}
+
+--ap375ATEX, this object is the SYSOID
+ap375ATEX OBJECT IDENTIFIER ::= {apProducts 124}
+
+--Undefined ap.
+apUndefined OBJECT IDENTIFIER ::= { apProducts 9999}
+
+-- EMS Products
+emsProducts OBJECT IDENTIFIER ::= { products 3}
+
+
+--Partner Products
+partnerProducts OBJECT IDENTIFIER	::= {products 4}
+
+ecsE50    OBJECT IDENTIFIER ::= {partnerProducts 1}
+ecsE100C  OBJECT IDENTIFIER ::= {partnerProducts 2}
+ecsE100A  OBJECT IDENTIFIER ::= {partnerProducts 3}
+ecsENSM   OBJECT IDENTIFIER ::= {partnerProducts 4}
+
+--Amigopod
+amigopodProducts OBJECT IDENTIFIER ::= { products 5 }
+
+-- ClearPass
+clearpassProducts OBJECT IDENTIFIER ::= { products 6 }
+
+-- ClearPass Policy Manager
+clearpass OBJECT IDENTIFIER ::= { clearpassProducts 1 }
+
+-- List of all the Enterprise MIB Modules.
+
+-- common node will contain all the objects which can be shared between
+-- Aruba products.
+
+common	OBJECT IDENTIFIER ::= { arubaEnterpriseMibModules 1 }
+
+-- switch node will contain all the objects for the switch products
+
+switch OBJECT IDENTIFIER ::= { arubaEnterpriseMibModules 2 }
+
+-- Aruba AP will contain all the objects for the Aruba AP.
+arubaAp OBJECT IDENTIFIER ::= { arubaEnterpriseMibModules 3 }
+
+arubaEcs	OBJECT IDENTIFIER ::= {arubaEnterpriseMibModules 4}
+
+-- Common MIB Modules shared across Aruba products.
+arubaMIBModules OBJECT IDENTIFIER ::= { common 1 }
+
+-- Switch Mib Modules.
+wlsxEnterpriseMibModules OBJECT IDENTIFIER ::= { switch 1 }
+
+-- Access Point Mib Modules.
+wlsrEnterpriseMibModules OBJECT IDENTIFIER ::= { arubaAp 1 }
+
+-- Outdoor AP Mib definition.
+wlsrOutDoorApMibModules OBJECT IDENTIFIER ::= { arubaAp 2 }
+
+-- Instant Mib definition.
+aiEnterpriseMibModules OBJECT IDENTIFIER ::= { arubaAp 3 }
+
+
+END
diff --git a/MIBS/arubaos/ARUBA-TC b/MIBS/arubaos/ARUBA-TC
new file mode 100644
index 0000000..54cd715
--- /dev/null
+++ b/MIBS/arubaos/ARUBA-TC
@@ -0,0 +1,1162 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+ARUBA-TC DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ObjectSyntax, TimeTicks
+        FROM SNMPv2-SMI;
+
+
+-- definition of textual conventions
+
+ArubaEnableValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents a Flag which is either Enabled or Disabled."
+    SYNTAX       INTEGER { enabled(1), disabled(2) }
+
+
+ArubaFrameType ::= TEXTUAL-CONVENTION
+   	STATUS       current
+   	DESCRIPTION
+           "Represents the Frame type."
+    SYNTAX       INTEGER {
+						associateRequest(0),
+						associateResponse(1),
+						reassociateRequest(2),
+						reassociateResponse(3),
+						probeRequest(4),
+						probeResponse(5),
+						beacon(8),
+						atim(9),
+						disassociate(10),
+						auth(11),
+						deauth(12)
+				 }
+
+ArubaPhyType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the PHY-type of the access point or client.  Wired clients will
+		  show 'wired' in user MIB entries.
+		"
+	SYNTAX       INTEGER {
+		 				dot11a(1),
+						dot11b(2),
+						dot11g(3),
+						dot11ag(4),
+						wired(5)
+					  }
+        
+ArubaHTMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the HT status of the access point or client.
+		"
+	SYNTAX       INTEGER {
+		 				none(1),
+						ht20(2),
+						ht40(3),
+						vht20(4),
+						vht40(5),
+						vht80(6),
+						vht160(7),
+						vht80plus80(8),
+						he20(9),
+						he40(10),
+						he80(11),
+						he160(12),
+						he80plus80(13)
+					  }
+        
+ArubaHTExtChannel ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the extension channel offset relative to the current channel."
+	SYNTAX       INTEGER {
+		 				none(1),
+						above(2),
+						below(3),
+						eighty(4),
+                        onesixty(5)
+					  }
+        
+ArubaMonEncryptionType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the encryption type supported by the access point."
+	SYNTAX       INTEGER {
+		 				open(0),
+						wep(1),
+						wpa(2),
+						wpa2(3),
+						wpa3(4)
+					  }
+
+ArubaMonEncryptionCipher ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the WPA encryption cipher supported by the access point."
+	SYNTAX       INTEGER {
+		 				none(0),
+						wep40(1),
+						wep104(2),
+						tkip(3),
+						aesccmp(4),
+						other(5),
+						gcm256(6)
+					  }
+
+ArubaMonAuthAlgorithm ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the WPA authentication algorithm supported by the access point."
+	SYNTAX       INTEGER {
+		 				none(0),
+						psk(1),
+						dot1x(2),
+						ftdot1x(3),
+						ftpsk(4),
+						dot1x256(5),
+						psk256(6),
+						tdls(7),
+						sae(8),
+						ftsae(9),
+						other(10),
+						suiteb(11),
+						owe(12)
+					  }
+                      
+ArubaSwitchRole ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the role of the controller"
+	SYNTAX       INTEGER {
+		 				master(1),
+						local(2),
+						backupmaster(3),
+                                                standalone(4)
+					  }
+          
+ArubaSupportStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents if a feature is supported or unsupported."
+	SYNTAX       INTEGER {
+		 				unsupported(1),
+						supported(2)
+					  }
+         
+ArubaActiveState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents if a feature is active or inactive."
+	SYNTAX       INTEGER {
+		 				active(1),
+						inactive(2)
+					  }
+          
+ArubaACLDomain ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents both the source and destination to which an ACL rule will
+		  be applied.
+		"
+	SYNTAX       INTEGER {
+		 				alias(1),
+						any(2),
+						user(3),
+						host(4),
+						network(5)
+					  }
+           
+ArubaACLNetworkServiceType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the network service in an ACL Rule."
+	SYNTAX       INTEGER {
+		 				alias(1),
+						any(2),
+						tcp(3),
+						udp(4),
+						protocol(5)
+					  }
+            
+ArubaACLAction ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+	SYNTAX       INTEGER {
+		 				deny(1),
+						permit(2),
+						srcNAT(3),
+						dstNAT(4),
+						redirect(5)
+					  }
+             
+ArubaDaysOfWeek ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+	SYNTAX       INTEGER {
+		 				sun(1),
+						mon(2),
+						tue(3),
+						wed(4),
+						thu(5),
+						fri(6),
+						sat(7)
+					  }
+              
+ArubaAuthenticationMethods ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Authentication Method."
+	SYNTAX       INTEGER {
+		 				none(0),
+		 				web(1),
+						mac(2),
+						vpn(3),
+						dot1x(4),
+						kerberos(5),
+						secureId(7),
+						pubcookie(15),
+						xSec(16),
+						xSecMachine(17),
+						via-vpn(28),
+						other(255)
+					  }
+     
+ArubaSubAuthenticationMethods ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Sub Authentication Method (e.g. EAP type)."
+	SYNTAX       INTEGER {
+		 				authPAP(1),
+						authCHAP(2),
+						authMSCHAP(3),
+						authMSCHAPv2(4),
+						eapTLS(5),
+						eapTTLS(6),
+						eapLEAP(7),
+						eapMD5(8),
+						eapPEAP(9)
+					  }
+
+ArubaEncryptionType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Encryption Method."
+	SYNTAX       INTEGER {
+		 				none(0),
+		 				static-wep(1),
+					    dynamic-wep(2),
+						wpa-psk-tkip(3),
+						wpa-tkip(4),
+						wpa-psk-aes(5),
+						wpa-aes(6),
+						wpa2-psk-tkip(7),
+						wpa2-tkip(8),
+						wpa2-psk-aes(9),
+						wpa2-aes(10),
+                        xSec(11),
+                        bSec-128(12),
+                        bSec-256(13),
+                        aes-128-cmac(14),
+                        unknown(15),
+                        ft-psk(16),
+                        ft-8021x(17),
+                        wpa3-cnsa(18),
+                        owe-aes(20),
+                        wpa3-sae-aes(21),
+                        wpa3-aes-gcmp-256(22)
+					  }
+     
+ArubaUserForwardMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" User Forwarding Mode."
+	SYNTAX       INTEGER {
+		 				tunnel-encrypted(0),
+                        bridge(1),
+		 				tunnel-decrypted(2),
+					    split-tunnel(3)
+					  }
+
+ArubaRogueApType ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the Rogue AP Type. "
+   SYNTAX      INTEGER {
+						valid(1),
+						interfering(2),
+						unsecure(3),
+		 				dos(4),
+						unknown(5),
+						knownInterfering(6),
+						suspectedUnsecure(7)
+					 }
+          
+ArubaAPMatchType ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the match type of a suspected rogue AP. "
+   SYNTAX      INTEGER {
+						unknown(0),
+						configuredWiredMac(1),
+						ethernetWiredMac(2),
+						apWiredMac(3),
+		 				externalWiredMac(4),
+						manual(5),
+						baseBSSIDOverride(6),
+						mms(7),
+						ethernetGatewayWiredMac(8),
+						classificationDisabled(9),
+						apBSSID(10),
+						propagatedEthernetWiredMac(11),
+						apRule(12),
+						systemWiredMac(13),
+						systemGatewayMac(14)
+					 }
+
+ArubaAPMatchMethod ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the match method of a suspected rogue AP. "
+   SYNTAX      INTEGER {
+						notApplicable(0),
+						exactMatch(1),
+						plusOneMatch(2),
+						minusOneMatch(3),
+						ouiMatch(4)
+					 }
+
+ArubaStationType ::= TEXTUAL-CONVENTION
+   STATUS	  current
+   DESCRIPTION
+   		"Represents the station type. "
+   SYNTAX      INTEGER {
+						unknown(0),
+						valid(1),
+						interfering(2),
+		 				dos(3)
+					 }
+          
+ArubaEncryptionMethods ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+    SYNTAX      BITS{
+						disabled(0),
+						static-wep(1),
+						dynamic-wep(2),
+						static-wpa(3),
+						dynamic-wpa(4),
+						wpa2-psk-aes(5),
+						wpa2-8021x-aes(6),
+						wpa2PreAuth(7),
+						xsec(8),
+						wpa-psk-aes(9),
+						wpa-aes(10),
+						wpa2-psk-tkip(11),
+						wpa2-8021x-tkip(12),
+						bSec-128(13),
+						bSec-256(14),
+						owe-aes(16),
+						wpa3-sae-aes(17),
+						wpa3-cnsa(18),
+						wpa3-aes-ccm-128(19),
+						mpsk-aes(21),
+						wpa3-aes-gcm-256(22)
+						}
+
+ ArubaHashAlgorithms ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Actions in an ACL rule."
+	SYNTAX       INTEGER {
+		 				md5(1),
+						sha(2)
+					  }
+  
+ArubaVlanValidRange	::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the Valid Vlan Id Range."
+	SYNTAX		INTEGER(1..4095)
+  
+ArubaPortMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the controller port mode."
+	SYNTAX		INTEGER {
+					access(1),
+					dot1q(2)
+				}
+  
+ArubaDot1dState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the controller port spanning tree state."
+	SYNTAX		INTEGER {
+					disabled(1),
+					blocked(2),
+					listening(3),
+					learning(4),
+					forwarding(5)
+				}
+  
+ArubaAPDot1dState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the AP port spanning tree state."
+	SYNTAX		INTEGER {
+					notAvailable(1),
+					off(2),
+					disabled(3),
+					listening(4),
+					learning(5),
+					forwarding(6),
+					blocking(7)
+				}
+  
+ArubaPoeState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"Represents the POE mode."
+	SYNTAX		INTEGER {
+					disabled(1),
+					enabled(2),
+					enabledCisco(3),
+                                        notAvailable(4)
+				}
+ 
+ArubaCardType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Type of the hardware module.
+		"
+	SYNTAX		INTEGER {
+					lc1(1),
+					lc2(2),
+					sc1(3),
+					sc2(4),
+					sw2400(5),
+					sw800(6),
+					sw200(7),
+					m3mk1(8),
+					sw3200(9),
+					sw3400(10),
+					sw3600(11),
+					sw650(12),
+					sw651(13),
+					reserved1(14),
+					reserved2(15),
+					sw620(16),
+					sw7210(17),
+					sw7220(18),
+					sw7240(19),
+					sw3500(20),
+					sw2500(21),
+					sw1500(22),
+					sw7010(23),
+					sw7005(24),
+					sw7030(25),
+					sw7205(26),
+					sw7024(27),
+					sw7024xm(28)
+				}
+ 
+ArubaESIServerMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The mode of the ESI server.
+		"
+	SYNTAX		INTEGER {
+					bridged(1),
+					routed(2),
+					nat(3)
+				}
+ 
+ArubaESIServerStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The status of the ESI server.
+		"
+	SYNTAX		INTEGER {
+					up(1),
+					down(2)
+				}
+
+ArubaIfType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The type of interface referred to by the value of ifIndex.
+		"
+	SYNTAX		INTEGER {
+					port(1),
+					vlan(2),
+					tunnel(3),
+					loopback(4)
+				}
+
+ArubaVoipProtocolType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The type of VoIP protocols supported.
+		"
+	SYNTAX       INTEGER{
+		 				sccp(1),
+						svp(2),
+						vocera(3),
+						sip(9),
+						ua(11),
+						h323(13),
+						unknown(15)
+		 		 }
+
+ArubaAccessPointMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The mode of the access point.
+		"
+	SYNTAX       INTEGER{
+		 				airMonitor(1),
+						accessPoint(2),
+						accessPointAndMonitor(3),
+						meshPortal(4),
+						meshPoint(5),
+						rfprotectSensor(6),
+						spectrumSensor(7)
+		 		 }
+
+ArubaAuthServerType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The type of the auth server.
+		"
+         SYNTAX       INTEGER{
+		 				internaldb(1),
+						radius(2),
+						ldap(3),
+						kerberos(4),
+						tacacs(5)
+					  }
+
+ArubaAddressType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Address Type. 
+		"
+	SYNTAX       INTEGER{
+		 				srcAddress(1),
+						dstAddress(2),
+						bssid(3)
+		 		 }
+
+ArubaBlackListReason ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Black List Reason. 
+		"
+	SYNTAX       INTEGER {
+		 				userDefined(1),
+						mitmAttack(2),
+						authFailure(3),
+						pingFlood(4),
+						sessionFlood(5),
+						synFlood(6),
+						sessionBlacklist(7),
+						ipSpoofing(8),
+						esiBlacklist(9),
+						other(100)
+		 			  }
+
+ArubaDBType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		DataBase Type. 
+		"
+	SYNTAX       INTEGER {
+		 				mssql(1),
+						mysql(2)
+		 			  }
+
+
+ArubaVrrpState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		DataBase Type. 
+		"
+	SYNTAX       INTEGER {
+						initialize(1),
+						backup(2),
+		 				master(3)
+		 			  }
+
+
+ArubaOperStateValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents Operational state of an interface."
+    SYNTAX       INTEGER { up(1), down(2), testing(3) }
+
+
+
+ArubaAntennaSetting ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "Represents the status of the external antenna."
+    SYNTAX       INTEGER { notPresent(1), enabled(2), disabled(3) }
+
+ArubaAPStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The status of the access point.
+		"
+	SYNTAX		INTEGER { up(1), down(2) }
+
+ArubaPortSpeed ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Port Speed.
+		"
+	SYNTAX		INTEGER { speed10Mbps(1), 
+						  speed100Mbps(2), 
+						  speed1000Mbps(3), 
+						  speedAuto(4),
+						  speed10Gbps(5),
+						  speed2Point5Gbps(6),
+						  speed5Gbps(7),
+                          speed40Gbps(8)
+						}
+
+ArubaPortDuplex ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Port Duplexity.
+		"
+	SYNTAX		INTEGER { half(1), 
+						  full(2), 
+						  auto(3)
+						}
+
+ArubaPortType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		Port Type.
+		"
+	SYNTAX		INTEGER { fastethernet(1), 
+						  gigabitethernet(2),
+						  xgigabitethernet(3),
+						  twogigabitethernet(4), 
+						  fivegigabitethernet(5) 
+						}
+
+ArubaEnet1Mode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Mode of the Ethernet port on the Access Point"
+	SYNTAX       INTEGER {
+		 				activeStandby(1),
+						tunnel(2),
+						bridge(3),
+						notApplicable(4),
+						split(5)
+					  }
+ 
+ArubaUnprovisionedStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents whether the AP is provisioned or not."
+	SYNTAX       INTEGER {
+		 				yes(1),
+						no(2)
+					  }
+ 
+ArubaMonitorMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents whether the AP has any radios dedicated to monitoring."
+	SYNTAX       INTEGER {
+		 				unknown(0),
+		 				all(1),
+						none(2),
+						mixed(3)
+					  }
+ 
+ArubaConfigurationState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION	
+		"Configuration Transfer Types."
+	SYNTAX		INTEGER {
+					success(1),
+					error(2)
+				}
+ 
+ArubaConfigurationChangeType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION	
+		"Configuration Change Types."
+	SYNTAX		INTEGER {
+					create(1),
+					delete(2),
+					modify(3)
+				}
+
+ArubaCallStates ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The Call state.
+		"
+	SYNTAX		INTEGER {
+				idle(0),
+				initiated(1),
+				connecting(2),
+				delivered(3),
+				connected(4),
+				offered(5),
+				alerting(6),
+				releasing(7),
+				cancelling(8),
+				challenging(9),
+				transient(10),
+				blockwait(11),
+				succ(12),
+				fail(13),
+				aborted(14),
+				blocked(15)
+			}
+   
+ArubaVoipProtocol ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  VoIP protocol used
+		"
+	SYNTAX		INTEGER {
+			sccp(1), 
+			svp(2), 
+			vocera(3), 
+			sip(9), 
+			ua(11), 
+			h323(13)
+	}
+
+ArubaVoipRegState ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  VoIP registered state
+		"
+	SYNTAX		INTEGER {
+			unknown(0), 
+			registering(1), 
+			unregistering(2), 
+			challenge(3), 
+			registered(4), 
+			unregistered(5)
+	}
+
+ArubaVoiceCdrDirection ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  VoIP CDR direction
+		"
+	SYNTAX		INTEGER {
+			og(0), 
+			ic(1)
+	}
+
+ArubaVoiceCacBit ::= TEXTUAL-CONVENTION
+	STATUS    current
+	DESCRIPTION
+		"
+			Voice CAC bit flags
+		"
+	SYNTAX 	BITS {
+			cacActiveLoadBalancing(0),
+			cacHighCapThresholdReached(1),
+			cacHandRsrvThresholdReached(2),
+			cacPeakCapacityReached(3)
+	}
+	
+ArubaMeshRole ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  Mesh role
+		"
+	SYNTAX		INTEGER {
+			nonmesh(0),
+			point(1), 
+			portal(2)
+	}
+
+ArubaHTRate ::= TEXTUAL-CONVENTION
+   	STATUS       current
+   	DESCRIPTION
+           "Represents HT rate"
+    SYNTAX       INTEGER {
+					unknown(0),
+					ht6dot5(1),
+					ht13(2),
+					ht13dot5(3),
+					ht15(4),
+					ht19dot5(5),
+					ht26(6),
+					ht27(7),
+					ht30(8),
+					ht39(9),
+					ht40dot5(10),
+					ht45(11),
+					ht52(12),
+					ht54(13),
+					ht58dot5(14),
+					ht60(15),
+					ht65(16),
+					ht78(17),
+					ht81(18),
+					ht90(19),
+					ht104(20),
+					ht108(21),
+					ht117(22),
+					ht120(23),
+					ht121dot5(24),
+					ht130(25),
+					ht135(26),
+					ht150(27),
+					ht162(28),
+					ht180(29),
+					ht216(30),
+					ht240(31),
+					ht243(32),
+					ht270(33),
+					ht300(34)
+				 }
+
+
+ArubaARMChangeReason ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		The reason for ARM or AirMatch based change.
+		"
+	SYNTAX       INTEGER {
+                       radarDetected(1),
+                       radarCleared(2),
+                       txHang(3),
+                       txHangClear(4),
+                       fortyMhzIntol(5),
+                       cancel40mhzIntol(6),
+                       fortyMhzAlign(7),
+                       armInterference(8),
+                       armInvalidCh(9),
+                       armErrorThresh(10),
+                       armNoiseThresh(11),
+                       armEmptyCh(12),
+                       armRogueCont(13),
+                       armDecreasePower(14),
+                       armIncreasePower(15),
+                       armTurnOffRadio(16),
+                       armTurnOnRadio(17),
+                       armChannelQualityThresh(18),
+                       armDynamicBW(19),
+                       armInterferenceCCA(20),
+                       airmatchNoise(21),
+                       airmatchSolver(22),
+                       airmatchFreeze(23),
+                       airmatchUnfreeze(24),
+                       random(25),
+                       airmatchInit(26),
+                       unknown(27),
+                       airmatchNoiseCleared(28),
+                       airmatchRogueCont(29)
+   }
+
+ArubaAPMasterStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  AP status as seen by the master controller
+          (used to indicate a status change).
+		"
+	SYNTAX		INTEGER {
+			up(1),
+			down(2), 
+			move(3)
+	}
+
+ArubaDot3azStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the state of Energy Efficient Ethernet (802.3az)."
+    SYNTAX      BITS {
+						disabled(0),
+						unsupported(1),
+						eee100BaseTX(2),
+						eee1000BaseT(3),
+						eee10GBaseT(4),
+						eee1000BaseKX(5),
+						eee10GBaseKX4(6),
+						eee10GBaseKR(7)
+					 }
+	
+ArubaDot3bzStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the state of 802.3bz."
+    SYNTAX      INTEGER {
+						unsupported(0),
+						no(1),
+		 				yes(2)
+					 }
+		
+ArubaThresholdResourceType ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the Threshold Resource Types"
+    SYNTAX      INTEGER {
+					dataPathCpu(0),
+					controlPathCpu(1),
+					controlPathMemory(2),
+					totalTunnelCapacity(3),
+					userCapacity(4),
+					noofAps(5) ,
+					noofLocals(6),
+					noofVaps(7)
+				}
+
+ArubaStackState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The state of the stack element in the stack.
+
+        primary   - the stack element is in primary state.
+        secondary - the stack element is in secondary state.
+        linecard  - the stack element is in linecard state.
+        away      - the stack element is in inactive state.
+
+        primary, secondary and linecard implies active state of the stack
+        element."
+    SYNTAX      INTEGER {
+                   primary(1),
+                   secondary(2),
+                   linecard(3),
+                   away(4)
+    }
+
+ArubaStackChangeEvent  ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the event which caused change in topology in stack."
+    SYNTAX      INTEGER {
+                      other(1),
+                      primarySlotChanged(2),
+                      secondarySlotChanged(3),
+                      lineCardSlotChanged(4),
+                      roleChanged(5),
+                      priorityChanged(6),
+                      versionMismatch(7),
+                      slotExceeded(8)
+    }
+
+ArubaStackIfTopoJoined ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify whether an interface has joined the stacking
+        topology or left the topology."
+    SYNTAX      INTEGER {
+        connected(1),   -- An interface has joined stacking topology.
+        disconnected(2) -- An interface has left stacking topology.
+    }
+
+InterfaceIndex ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface or
+            interface sub-layer in the managed system.  It is
+            recommended that values are assigned contiguously starting
+            from 1.  The value for each interface sub-layer must remain
+            constant at least from one re-initialization of the entity's
+            network management system to the next re-initialization."
+    SYNTAX       Integer32 (1..2147483647)
+
+ArubaIfState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the state of an interface.
+
+        linkUp   - Operational state of this interface is up.
+        linkDown - Operational state of this interface is down."
+    SYNTAX  INTEGER {
+        linkUp(1),
+        linkDown(2)
+    }
+
+ArubaIfStateChangeReason ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the reason for interface state change.
+
+        admin       - User has explicitly issued 'shutdown' or 'no shutdown'
+                      configuration from CLI on this interface.
+        loopProtect - If ifState of an interface changes to linkDown, then
+                      it is used to specify that a loop has been detected on
+                      this interface by loop protect mechanism.
+                      If ifState of an interface changes to linkUp, then
+                      it is used to specify that loop-protect error has been
+                      cleared out on this interface through port auto-recovery
+                      mechanism or through explicit clear error-recovery
+                      command.
+        macLimit    - If ifState of an interface changes to linkDown, then
+                      it is used to specify that number of learnt MACs on this
+                      interface exceeds the limit configured.
+                      If ifState of an interface changes to linkUp, then it is
+                      used to specify that mac-limit error has been cleared out
+                      on this interface through port auto-recovery mechanism or
+                      through explicit clear error-recovery command.
+        raGuard     - If ifState of an interface changes to linkDown, then it
+                      is used to specify that invalid router advertisement has
+                      been identified on this interface, resulting shutting
+                      down of this interface.
+                      If ifState of an interface changes to linkUp, then it is
+                      used to specify that raGuard error has been cleared out on
+                      this interface through port auto-recovery mechanism or
+                      through explicit clear error-recovery command.
+        bpduGuard   - If ifState of an interface changes to linkDown, then it
+                      is used to specify that BPDU is received on this interface
+                      resulting shutting down of this interface.
+                      If ifState of an interface changes to linkUp, then it is
+                      used to specify that BPDU Guard error has been cleared out
+                      on this interface through port auto-recovery mechanism or
+                      through explicit clear error-recovery command."
+    SYNTAX  INTEGER {
+        admin(1),
+        loopProtect(2),
+        macLimit(3),
+        raGuard(4),
+        bpduGuard(5)
+    }
+
+ArubaAPUplinkType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "
+          AP uplink type
+        "
+    SYNTAX       INTEGER {
+            ethernet(1),
+            usb(2),
+            pppoe(3),
+            wifi(4)
+    }
+
+ArubaAPUplinkChangeReason ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the reason for AP uplink change.
+
+        linkFailure - The uplink went down
+        vpnFailure  - VPN tunnel could not be sustained using the uplink
+        preemption  - The uplink was pre-empted by a higher-priority uplink"
+    SYNTAX  INTEGER {
+        linkFailure(1),
+        vpnFailure(2),
+        preemption(3)
+    }
+
+ArubaPortalServerDownReason ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "Used to specify the reason for Portal server down.
+
+        connectFail - Connect Portal server fail"
+    SYNTAX  INTEGER {
+        connectFail(1)
+    }
+
+ArubaHaRole ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the HA role of the Aruba controller"
+	SYNTAX       INTEGER {
+                             dual(0),
+                             active(1),
+                             standby(2),
+                             disabled(3)
+                         }
+
+ArubaHaConnectivityStatus ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+  		" Represents the HA standby connectivity status of the Access Point"
+	SYNTAX      INTEGER {
+                            haSuccess(0),
+                            haNetUnreach(1),
+                            haCpUnreach(2),
+                            haImageMissMatch(3),
+                            haApDenied(4),
+                            haHbtFailure(5),
+                            haInvalidHelloResponse(6),
+                            haStandbyTunnelDown(7)
+					    }
+
+ArubaFlexRadioMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  Flex Radio Operating Mode
+		"
+	SYNTAX		INTEGER {
+                            single2GHzBand(0),
+                            single5GHzBand(1),
+                            dual2GHzplus5GHzBand(2), 
+                            unknown(3),
+                            notApplicable(4)
+                       }
+
+ArubaDual5GMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  Dual 5GHz Operating Mode
+		"
+	SYNTAX		INTEGER {
+                            disabled(0),
+                            enabled(1),
+                            unknown(2),
+                            notApplicable(3)
+                       }
+
+ArubaSplit5GMode ::= TEXTUAL-CONVENTION
+	STATUS		current
+	DESCRIPTION
+		"
+		  Split 5GHz Operating Mode
+		"
+	SYNTAX		INTEGER {
+                            disabled(0),
+                            enabled(1),
+                            unknown(2),
+                            notApplicable(3)
+                       }
+
+END
diff --git a/MIBS/arubaos/WLSR-AP-MIB b/MIBS/arubaos/WLSR-AP-MIB
new file mode 100644
index 0000000..63ca2d8
--- /dev/null
+++ b/MIBS/arubaos/WLSR-AP-MIB
@@ -0,0 +1,3511 @@
+--- ArubaOS 8.8.0.1_80393
+   WLSR-AP-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsrEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsrMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB is for managing the
+			Access Points and Air Monitors.
+			"
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsrEnterpriseMibModules 1 }
+
+   wlsrConfigGroup         	OBJECT IDENTIFIER ::= { wlsrMIB 1 }
+   wlsrStatsGroup   		OBJECT IDENTIFIER ::= { wlsrMIB 3 }
+   wlsrAirMonitorGroup   	OBJECT IDENTIFIER ::= { wlsrMIB 4 }
+   wlsrTrapsGroup         	OBJECT IDENTIFIER ::= { wlsrMIB 100 }
+
+   -- wlsrConfigGroup contains objects to describe the Current AP 
+   -- Configuration.
+
+-- wlsrConfigTable contains all the configuration data of an AP.
+-- Each row in the table will represent a wifi interface.
+
+   wlsrConfigTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrConfigEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		 Table will list the configuration data of a wifi interface.
+		"
+      ::= { wlsrConfigGroup 1 } 
+
+     wlsrConfigEntry OBJECT-TYPE 
+	  SYNTAX       WlsrConfigEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 A Wifi configuration entry
+			 "
+	  INDEX { wlsrBSSID }
+      ::= { wlsrConfigTable 1 } 
+
+     WlsrConfigEntry ::=
+     SEQUENCE {
+         wlsrBSSID					MacAddress,
+         wlsrESSID 					DisplayString,
+		 wlsrMode					INTEGER,
+		 wlsrCurrentChannel			INTEGER,
+		 wlsrTxPower					Integer32,
+		 wlsrRTSThreshold			INTEGER  ,
+		 wlsrRetryLimit				INTEGER  ,
+		 wlsrPreamble				INTEGER ,
+		 wlsrBeaconInterval			INTEGER  ,
+		 wlsrPowerMgmt				INTEGER ,
+		 wlsrLoadBalance			INTEGER ,
+		 wlsrSupportedRates			BITS ,
+		 wlsrDTIMPeriod				INTEGER ,
+		 wlsrLMSAddress				IpAddress ,
+		 wlsrEncryption				BITS ,
+		 wlsrStatus					TruthValue ,
+		 wlsrAgeout					Integer32 ,
+		 wlsrMTU					INTEGER ,
+		 wlsrLocation				DisplayString ,
+		 wlsrHideSSID				TruthValue ,
+		 wlsrDenyBroadcast			TruthValue,
+		 wlsrBGmode					INTEGER ,
+		 wlsrCardType				INTEGER ,
+		 wlsrRegDomain				Integer32 ,
+		 wlsrCountryCode			DisplayString,
+		 wlsrTxRates			        BITS
+     }
+
+     wlsrBSSID OBJECT-TYPE
+         SYNTAX       MacAddress 
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the WIFI Interface
+            "
+        ::= { wlsrConfigEntry 1 }
+
+     wlsrESSID OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 ESSID of the WIFI Interface
+            "
+        ::= { wlsrConfigEntry 2 }
+
+     wlsrMode OBJECT-TYPE
+        SYNTAX      INTEGER {
+						master(1),
+						adhoc(2),
+						monitor(3)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Mode of the Access Point. Master indicates that we are
+			operating as Access Point. monitor indicates that the
+			AP is an Air Monitor.
+            "
+        ::= { wlsrConfigEntry 3 }
+
+     wlsrCurrentChannel OBJECT-TYPE
+        SYNTAX      INTEGER (1..165) 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The current operating frequency channel of the DSSS PHY.
+            "
+        ::= { wlsrConfigEntry 4 }
+
+     wlsrTxPower OBJECT-TYPE
+        SYNTAX      Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Transmit power of the Access point. The value is between 0 ... 4
+            "
+        ::= { wlsrConfigEntry 5 }
+
+     wlsrRTSThreshold OBJECT-TYPE
+        SYNTAX      INTEGER (0..2347)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute shall indicate the number of octets in an MPDU,
+			below which an RTS/CTS handshake shall not be performed.
+            "
+        ::= { wlsrConfigEntry 6 }
+
+     wlsrRetryLimit OBJECT-TYPE
+        SYNTAX      INTEGER (1..255)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute shall indicate the maximum number of
+			transmission attempts of a frame, the length of which is less
+			than or equal to dot11RTSThreshold, that shall be made before a
+			failure condition is indicated. The default value of this
+			attribute shall be 7.
+            "
+        ::= { wlsrConfigEntry 7 }
+
+     wlsrPreamble OBJECT-TYPE
+        SYNTAX      INTEGER {
+						short(1),
+						long(2)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The current radio preamble type in use by the wifi interface.
+            "
+        ::= { wlsrConfigEntry 8 }
+
+     wlsrBeaconInterval OBJECT-TYPE
+        SYNTAX      INTEGER (1..65535)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object shall specify the number of TU that a station shall 
+			use for scheduling Beacon transmissions. This value is transmitted 
+			in Beacon and Probe Response frames.
+            "
+        ::= { wlsrConfigEntry 9 }
+
+     wlsrPowerMgmt OBJECT-TYPE
+        SYNTAX      INTEGER {
+						enable(1),
+						disable(2)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute  indicates whether Power Management is enabled
+			or not.
+            "
+        ::= { wlsrConfigEntry 10 }
+
+     wlsrLoadBalance OBJECT-TYPE
+        SYNTAX      INTEGER {
+						enable(1),
+						disable(2)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates if load balancing is enabled or disabled.
+            "
+        ::= { wlsrConfigEntry 11 }
+
+
+     wlsrSupportedRates OBJECT-TYPE
+        SYNTAX      BITS {
+						unused0(0),
+						unused1(1),
+						unused2(2),
+						unused3(3),
+						rate54Mbps(4),
+						rate48Mbps(5),
+						rate36Mbps(6),
+						rate24Mbps(7),
+						rate18Mbps(8),
+						rate12Mbps(9),
+						rate9Mbps(10),
+						rate6Mbps(11),
+						rate11Mbps(12),
+						rate5Mbps(13),
+						rate2Mbps(14),
+						rate1Mbps(15)
+					 }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Basic Bit rates supported by this WIFI interface.
+            "
+        ::= { wlsrConfigEntry 12 }
+
+     wlsrDTIMPeriod OBJECT-TYPE
+        SYNTAX      INTEGER (1..255)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute shall specify the number of beacon
+			 intervals that shall elapse between transmission of
+			 Beacons frames containing a TIM element whose DTIM
+			 Count field is 0. This value is transmitted in
+			 the DTIM Period field of Beacon frames.
+
+            "
+        ::= { wlsrConfigEntry 13 }
+
+
+     wlsrLMSAddress OBJECT-TYPE
+        SYNTAX      IpAddress 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the IP Address of the Local 
+			switch that the AP is connected to.
+            "
+        ::= { wlsrConfigEntry 14 }
+
+     wlsrEncryption OBJECT-TYPE
+        SYNTAX      BITS{
+						unused0(0),
+						unused1(1),
+						unused2(2),
+						unused3(3),
+						unused4(4),
+						unused5(5),
+						unused6(6),
+						xSec(7),
+						wpa2PreAuth(8),
+						aes8021x(9),
+						aesPSK(10),
+						dynamicTkip(11),
+						staticTkip(12),
+						dynamicWep(13),
+						staticWep(14),
+						disabled(15)
+						}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the Encryption type of the WIFI interface.
+            "
+        ::= { wlsrConfigEntry 15 }
+
+     wlsrStatus OBJECT-TYPE
+        SYNTAX      TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the status of the WIFI Interface.
+            "
+        ::= { wlsrConfigEntry 17 }
+
+     wlsrAgeout OBJECT-TYPE
+        SYNTAX      Integer32	
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the ageout value in seconds.
+            "
+        ::= { wlsrConfigEntry 18 }
+
+     wlsrMTU OBJECT-TYPE
+        SYNTAX      INTEGER (0..2347)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the MTU of the WIFI Interface.
+            "
+        ::= { wlsrConfigEntry 19 }
+
+     wlsrLocation OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the Location of the Access Point in
+			Building.Floor.location format.
+            "
+        ::= { wlsrConfigEntry 20 }
+
+     wlsrHideSSID OBJECT-TYPE
+        SYNTAX      TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates if SSID is hidden or not.
+            "
+        ::= { wlsrConfigEntry 21 }
+
+     wlsrDenyBroadcast OBJECT-TYPE
+        SYNTAX      TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			A True value indicates that Broadcast is disabled.
+            "
+        ::= { wlsrConfigEntry 22 }
+
+     wlsrBGmode OBJECT-TYPE
+        SYNTAX      INTEGER{
+						bgMixed(1),
+						bOnly(2),
+						gOnly(3)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attributes indicates the mode of the WIFI Interface
+            "
+        ::= { wlsrConfigEntry 23 }
+
+     wlsrCardType OBJECT-TYPE
+        SYNTAX      INTEGER {
+						noCard(1),
+						intersil(2),
+						atherosA(3),
+						atherosBG(4),
+						atherosABG(5),
+						ar5212A(10),
+						ar5212BG(11),
+						ar5212ABG(12)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the type of the radio card.
+            "
+        ::= { wlsrConfigEntry 24 }
+
+     wlsrRegDomain OBJECT-TYPE
+        SYNTAX      Integer32 
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			This Object represents the configured Regulatory Domain this AP 
+			will adhere to.
+			1 -- US
+			2 -- JAPAN
+			3 -- EU
+			4 -- EU2
+			5 -- EU3
+			6 -- KOREA
+			7 -- CHINA
+			8 -- France
+			9 -- Singapore
+			10 -- MALAY
+			11 -- BRAZIL
+			12 -- Taiwan
+			13 -- Czech Republic
+			14 -- GR
+			15 -- South Africa
+			16 -- Argentina
+			17 -- Australia
+			18 -- Chile
+            "
+        ::= { wlsrConfigEntry 25 }
+
+     wlsrCountryCode OBJECT-TYPE
+        SYNTAX      DisplayString (SIZE(0..64)) 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object represents the configured Country code .
+            "
+        ::= { wlsrConfigEntry 26 }
+
+     wlsrTxRates OBJECT-TYPE
+        SYNTAX      BITS {
+						unused0(0),
+						unused1(1),
+						unused2(2),
+						unused3(3),
+						rate54Mbps(4),
+						rate48Mbps(5),
+						rate36Mbps(6),
+						rate24Mbps(7),
+						rate18Mbps(8),
+						rate12Mbps(9),
+						rate9Mbps(10),
+						rate6Mbps(11),
+						rate11Mbps(12),
+						rate5Mbps(13),
+						rate2Mbps(14),
+						rate1Mbps(15)
+					 }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Transmit Bit rates supported by this WIFI interface.
+            "
+        ::= { wlsrConfigEntry 27 }
+
+-- wlsrStatsGroup All the Statistics stored by the Access Point.
+
+-- Channel Statistics Group contains all the statistics related to 
+-- a channel.
+
+-- wlsrChannelStatsTable will contain all the Aggregate statistics collected
+-- on a channel
+
+   wlsrStatsChannelGroup   	OBJECT IDENTIFIER ::= { wlsrStatsGroup 3 }
+
+   wlsrChannelStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrChannelStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		Table contains the Channel Statistics.
+		"
+	
+      ::= { wlsrStatsChannelGroup 1 } 
+
+     wlsrChannelStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrChannelStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Channel Statistics Table"
+	  INDEX { wlsrChStatsChannel}
+      ::= { wlsrChannelStatsTable 1 } 
+
+     WlsrChannelStatsEntry ::=
+     SEQUENCE {
+         wlsrChStatsChannel 					INTEGER    ,
+         wlsrChStatsNumAPs                      Integer32  ,
+         wlsrChStatsNumStations 				Integer32  ,
+		 wlsrChStatsTotPkts					Counter32  ,
+		 wlsrChStatsTotBytes					Counter32  ,
+		 wlsrChStatsTotRetryPkts				Counter32  ,
+		 wlsrChStatsTotFragmentedPkts		Counter32  ,
+		 wlsrChStatsTotPhyErrPkts			Counter32  ,
+		 wlsrChStatsTotMacErrPkts			Counter32  ,
+		 wlsrChStatsFrameErrorRate			Integer32   ,
+		 wlsrChStatsFrameRetryRate			Integer32   ,
+		 wlsrChStatsFrameLowSpeedRate		Integer32   ,
+		 wlsrChStatsFrameNonUnicastRate		Integer32   ,
+		 wlsrChStatsFrameBandwidthRate		Integer32   ,
+		 wlsrChStatsFrameFragmentationRate	Integer32   ,
+		 wlsrChStatsMonitoredTime			TimeTicks   
+
+     }
+
+     wlsrChStatsChannel OBJECT-TYPE
+         SYNTAX       INTEGER (1..165)
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The frequency Channel on which these statistics are collected.
+            "
+        ::= { wlsrChannelStatsEntry 1 }
+
+     wlsrChStatsNumAPs OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the number of APs using this 
+			channel.
+            "
+        ::= { wlsrChannelStatsEntry 2 }
+
+
+     wlsrChStatsNumStations OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the number of stations using this 
+			channel.
+            "
+        ::= { wlsrChannelStatsEntry 3 }
+
+
+     wlsrChStatsTotPkts OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total packets observed on this
+			channel.
+            "
+        ::= { wlsrChannelStatsEntry 4 }
+
+     wlsrChStatsTotBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Bytes observed on this
+			channel.
+            "
+        ::= { wlsrChannelStatsEntry 5 }
+
+     wlsrChStatsTotRetryPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Retry Packets observed on this
+			channel.
+            "
+        ::= { wlsrChannelStatsEntry 6 }
+
+     wlsrChStatsTotFragmentedPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Fragmented Packets observed on 
+			this channel.
+            "
+        ::= { wlsrChannelStatsEntry 7 }
+
+     wlsrChStatsTotPhyErrPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Physical Error Packets observed 
+			on this channel. 
+			"
+        ::= { wlsrChannelStatsEntry 8 }
+
+     wlsrChStatsTotMacErrPkts OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Mac errors packets observed on 
+			this channel.
+            "
+        ::= { wlsrChannelStatsEntry 9 }
+
+     wlsrChStatsFrameErrorRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame errors as a percentage of total frames on this channel.
+            "
+        ::= { wlsrChannelStatsEntry 10 }
+
+     wlsrChStatsFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Frame Retry Rate
+            "
+        ::= { wlsrChannelStatsEntry 11 }
+
+     wlsrChStatsFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Low speed error rate in kbps.
+            "
+        ::= { wlsrChannelStatsEntry 12 }
+
+     wlsrChStatsFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame non Unicast rate in kbps.
+            "
+        ::= { wlsrChannelStatsEntry 13 }
+
+     wlsrChStatsFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Bandwidth rate in kbps.
+            "
+        ::= { wlsrChannelStatsEntry 14 }
+
+     wlsrChStatsFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Fragmentation Rate in kbps.
+            "
+        ::= { wlsrChannelStatsEntry 15 }
+
+     wlsrChStatsMonitoredTime OBJECT-TYPE
+         SYNTAX       TimeTicks 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time in ticks, since we were observing this channel.
+            "
+        ::= { wlsrChannelStatsEntry 16 }
+
+-- This table breaks down the channel statistics observed into different
+-- rate categories.
+
+   wlsrChannelRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrChannelRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but represented in terms of rate categories.
+		"
+	
+      ::= { wlsrStatsChannelGroup 2 } 
+
+     wlsrChannelRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrChannelRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Channel Rate Statistics."
+	  INDEX { wlsrChStatsChannel}
+      ::= { wlsrChannelRateStatsTable 1 } 
+	
+     WlsrChannelRateStatsEntry ::=
+     SEQUENCE {
+		 wlsrChStatsTotPktsAt1Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt1Mbps			Counter32  ,
+		 wlsrChStatsTotPktsAt2Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt2Mbps			Counter32  ,
+		 wlsrChStatsTotPktsAt5Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt5Mbps			Counter32  ,
+		 wlsrChStatsTotPktsAt11Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt11Mbps		Counter32  ,
+		 wlsrChStatsTotPktsAt6Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt6Mbps			Counter32  ,
+		 wlsrChStatsTotPktsAt12Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt12Mbps		Counter32  ,
+		 wlsrChStatsTotPktsAt18Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt18Mbps		Counter32  ,
+		 wlsrChStatsTotPktsAt24Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt24Mbps		Counter32  ,
+		 wlsrChStatsTotPktsAt36Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt36Mbps		Counter32  ,
+		 wlsrChStatsTotPktsAt48Mbps			Counter32  ,
+		 wlsrChStatsTotBytesAt48Mbps		Counter32  ,
+		 wlsrChStatsTotPktsAt54Mbps			Counter32 ,
+		 wlsrChStatsTotBytesAt54Mbps		Counter32 
+
+     }
+
+     wlsrChStatsTotPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 1Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 1 }
+
+     wlsrChStatsTotBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 1Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 2 }
+
+     wlsrChStatsTotPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 2Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 3 }
+
+     wlsrChStatsTotBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 2Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 4 }
+
+     wlsrChStatsTotPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 5Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 5 }
+
+     wlsrChStatsTotBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 5Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 6 }
+
+     wlsrChStatsTotPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 11Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 7 }
+
+     wlsrChStatsTotBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 11Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 8 }
+
+     wlsrChStatsTotPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 6Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 9 }
+
+     wlsrChStatsTotBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 6Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 10 }
+
+     wlsrChStatsTotPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 12Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 11 }
+
+     wlsrChStatsTotBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 12Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 12 }
+
+     wlsrChStatsTotPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 18Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 13 }
+
+     wlsrChStatsTotBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 18Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 14 }
+
+     wlsrChStatsTotPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 24Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 15 }
+
+     wlsrChStatsTotBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 24Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 16 }
+
+     wlsrChStatsTotPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 36Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 17 }
+
+     wlsrChStatsTotBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 36Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 18 }
+
+     wlsrChStatsTotPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 48Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 19 }
+
+     wlsrChStatsTotBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 48Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 20 }
+
+     wlsrChStatsTotPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 on this channel at 54Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 21 }
+
+     wlsrChStatsTotBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this channel at 54Mbps rate.
+            "
+        ::= { wlsrChannelRateStatsEntry 22 }
+
+-- This table breaks down the channel statistics observed based on the
+-- Destination Address Types. 
+
+   wlsrChannelDATypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrChannelDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but broken down in terms of Destination Address Type. 
+		"
+      ::= { wlsrStatsChannelGroup 3 } 
+
+     wlsrChannelDATypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrChannelDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Channel Statistics based on the Address Type."
+	  INDEX { wlsrChStatsChannel}
+      ::= { wlsrChannelDATypeStatsTable 1 } 
+	
+     WlsrChannelDATypeStatsEntry ::=
+     SEQUENCE {
+		 wlsrChStatsTotDABroadcastPkts		Counter32  ,
+		 wlsrChStatsTotDABroadcastBytes		Counter32  ,
+		 wlsrChStatsTotDAMulticastPkts		Counter32  ,
+		 wlsrChStatsTotDAMulticastBytes		Counter32  ,
+		 wlsrChStatsTotDAUnicastPkts			Counter32  ,
+		 wlsrChStatsTotDAUnicastBytes		Counter32  
+
+     }
+
+     wlsrChStatsTotDABroadcastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Broadcast packets 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelDATypeStatsEntry 1 }
+
+     wlsrChStatsTotDABroadcastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Broadcast Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelDATypeStatsEntry 2 }
+
+     wlsrChStatsTotDAMulticastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Multicast packets 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelDATypeStatsEntry 3 }
+
+     wlsrChStatsTotDAMulticastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Multicast Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelDATypeStatsEntry 4 }
+
+     wlsrChStatsTotDAUnicastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Unicast packets 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelDATypeStatsEntry 5 }
+
+     wlsrChStatsTotDAUnicastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Unicast Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelDATypeStatsEntry 6 }
+
+-- This table breaks down the channel statistics observed based on the
+-- the Type of the Packet. 
+
+   wlsrChannelFrameTypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrChannelFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but broken down into different Frame Types. 
+		"
+      ::= { wlsrStatsChannelGroup 4 } 
+
+     wlsrChannelFrameTypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrChannelFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Channel Statistics based on Frame Type."
+	  INDEX { wlsrChStatsChannel}
+      ::= { wlsrChannelFrameTypeStatsTable 1 } 
+	
+     WlsrChannelFrameTypeStatsEntry ::=
+     SEQUENCE {
+		 wlsrChStatsTotMgmtPkts		Counter32  ,
+		 wlsrChStatsTotMgmtBytes	Counter32  ,
+		 wlsrChStatsTotCtrlPkts		Counter32  ,
+		 wlsrChStatsTotCtrlBytes	Counter32  ,
+		 wlsrChStatsTotDataPkts		Counter32  ,
+		 wlsrChStatsTotDataBytes	Counter32  
+
+     }
+
+     wlsrChStatsTotMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Management packets 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelFrameTypeStatsEntry 1 }
+
+     wlsrChStatsTotMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Management Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelFrameTypeStatsEntry 2 }
+
+     wlsrChStatsTotCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Control packets 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelFrameTypeStatsEntry 3 }
+
+     wlsrChStatsTotCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Control Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelFrameTypeStatsEntry 4 }
+
+     wlsrChStatsTotDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Data packets 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelFrameTypeStatsEntry 5 }
+
+     wlsrChStatsTotDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Data Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrChannelFrameTypeStatsEntry 6 }
+
+-- This table breaks down the channel statistics observed into packet size 
+-- buckets.
+
+   wlsrChannelPktSizeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrChannelPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but broken down into different Packet Sizes. 
+		"
+      ::= { wlsrStatsChannelGroup 5 } 
+
+     wlsrChannelPktSizeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrChannelPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Channel Statistics based on the packet sizes."
+	  INDEX { wlsrChStatsChannel}
+      ::= { wlsrChannelPktSizeStatsTable 1 } 
+	
+     WlsrChannelPktSizeStatsEntry ::=
+     SEQUENCE {
+		 wlsrChStatsPkts63Bytes		Counter32  ,
+		 wlsrChStatsPkts64To127		Counter32  ,
+		 wlsrChStatsPkts128To255		Counter32  ,
+		 wlsrChStatsPkts256To511		Counter32  ,
+		 wlsrChStatsPkts512To1023	Counter32  ,
+		 wlsrChStatsPkts1024To1518	Counter32  
+
+     }
+
+     wlsrChStatsPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			 less than 64 bytes long.
+            "
+        ::= { wlsrChannelPktSizeStatsEntry 1 }
+
+     wlsrChStatsPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			 between 64 and 127 bytes long.
+            "
+        ::= { wlsrChannelPktSizeStatsEntry 2 }
+
+     wlsrChStatsPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			 between 128 and 255 bytes long.
+            "
+        ::= { wlsrChannelPktSizeStatsEntry 3 }
+
+     wlsrChStatsPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			 between 256 and 511 bytes long.
+            "
+        ::= { wlsrChannelPktSizeStatsEntry 4 }
+
+     wlsrChStatsPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			 between 512 and 1023 bytes long.
+            "
+        ::= { wlsrChannelPktSizeStatsEntry 5 }
+
+     wlsrChStatsPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			 between 1024 and 1518 bytes long.
+            "
+        ::= { wlsrChannelPktSizeStatsEntry 6 }
+
+
+-- Station Statistics Group contains all the statistics related to 
+-- a Station.
+
+-- wlsrStaStatsTable will contain all the Aggregate statistics collected
+-- for a Station
+
+   wlsrStatsStaGroup   	OBJECT IDENTIFIER ::= { wlsrStatsGroup 4 }
+
+   wlsrStaStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrStaStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		 This Table contains all the Aggregate statistics collected for a 
+		 station.
+		"
+      ::= { wlsrStatsStaGroup 1 } 
+
+     wlsrStaStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrStaStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Statistics."
+	  INDEX { wlsrStaAddress}
+      ::= { wlsrStaStatsTable 1 } 
+
+     WlsrStaStatsEntry ::=
+     SEQUENCE {
+         wlsrStaAddress 							MacAddress ,
+		 wlsrStaTxPkts							Counter32  ,
+		 wlsrStaTxBytes							Counter32  ,
+		 wlsrStaRxPkts							Counter32  ,
+		 wlsrStaRxBytes							Counter32  ,
+		 wlsrStaTxRetryPkts					Counter32  ,
+		 wlsrStaRxRetryPkts					Counter32  ,
+		 wlsrStaTxFragmentedPkts				Counter32  ,
+		 wlsrStaRxFragmentedPkts				Counter32  ,
+		 wlsrStaReceiveErrPkts				Counter32  ,
+		 wlsrStaTxTotSignal					Integer32  ,
+		 wlsrStaTxSignalPkts					Counter32   ,
+		 wlsrStaTxCurSignal					Integer32   ,
+		 wlsrStaTxHighSignal					Integer32   ,
+		 wlsrStaRxTotNoise					Counter32   ,
+		 wlsrStaRxNoisePkts					Counter32   ,
+		 wlsrStaRxCurrentNoise				Integer32   ,
+		 wlsrStaRxHighNoise					Integer32   ,
+		 wlsrStaRxLowNoise					Integer32   ,
+		 wlsrStaFrameRetryRate				Integer32   ,
+		 wlsrStaFrameLowSpeedRate			Integer32   ,
+		 wlsrStaFrameNonUnicastRate			Integer32   ,
+		 wlsrStaFrameRetryErrorRate			Integer32   ,
+		 wlsrStaFrameBandwidthRate			Integer32   ,
+		 wlsrStaFrameFragmentationRate		Integer32   ,
+		 wlsrStaFrameHighBandwidthRate		Integer32   
+
+     }
+
+     wlsrStaAddress OBJECT-TYPE
+         SYNTAX       MacAddress 
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Mac Address of the Station connected to this Access Point.
+            "
+        ::= { wlsrStaStatsEntry 1 }
+		 
+     wlsrStaTxPkts OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total packets Transmitted to the
+			Station.
+            "
+        ::= { wlsrStaStatsEntry 2 }
+
+     wlsrStaTxBytes OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Bytes Transmitted to the
+			Station.
+            "
+        ::= { wlsrStaStatsEntry 3 }
+
+     wlsrStaRxPkts OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total packets Received from the
+			Station.
+            "
+        ::= { wlsrStaStatsEntry 4 }
+
+     wlsrStaRxBytes OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Bytes Received from the
+			Station.
+            "
+        ::= { wlsrStaStatsEntry 5 }
+
+     wlsrStaTxRetryPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the Retry Packets transmitted by the 
+			station
+            "
+        ::= { wlsrStaStatsEntry 6 }
+
+     wlsrStaRxRetryPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the Retry Packets received from the 
+			station
+            "
+        ::= { wlsrStaStatsEntry 7 }
+
+     wlsrStaTxFragmentedPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the Fragmented Packets transmitted by the 
+			station.
+            "
+        ::= { wlsrStaStatsEntry 8 }
+
+     wlsrStaRxFragmentedPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the Fragmented Packets Received from the 
+			station.
+            "
+        ::= { wlsrStaStatsEntry 9 }
+
+     wlsrStaReceiveErrPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Error Packets received from
+			this station.
+            "
+        ::= { wlsrStaStatsEntry 10 }
+
+     wlsrStaTxTotSignal OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The attribute indicates the total transmitted signal computed for 
+			this station.
+            "
+        ::= { wlsrStaStatsEntry 11 }
+
+     wlsrStaTxSignalPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Signal Packets transmitted by 
+			this station.
+            "
+        ::= { wlsrStaStatsEntry 12 }
+
+     wlsrStaTxCurSignal OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicate the stations current transmit signal 
+			strength.
+            "
+        ::= { wlsrStaStatsEntry 13 }
+
+     wlsrStaTxHighSignal OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicate the stations high transmit signal 
+			strength.
+            "
+        ::= { wlsrStaStatsEntry 14 }
+
+		 
+     wlsrStaRxTotNoise OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total Noise.
+            "
+        ::= { wlsrStaStatsEntry 15 }
+
+     wlsrStaRxNoisePkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Received Noise.
+            "
+        ::= { wlsrStaStatsEntry 16 }
+
+     wlsrStaRxCurrentNoise OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Current Noise.
+            "
+        ::= { wlsrStaStatsEntry 17 }
+
+     wlsrStaRxHighNoise OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			High Noise
+            "
+        ::= { wlsrStaStatsEntry 18 }
+
+     wlsrStaRxLowNoise OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Low Noise
+            "
+        ::= { wlsrStaStatsEntry 19 }
+
+     wlsrStaFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Retry Rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 20 }
+
+     wlsrStaFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Low speed error rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 21 }
+
+     wlsrStaFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Non Unicast rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 22 }
+
+     wlsrStaFrameRetryErrorRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Retry Error Rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 23 }
+
+     wlsrStaFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Bandwidth rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 24 }
+
+     wlsrStaFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Fragmentation Rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 25 }
+
+     wlsrStaFrameHighBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame High Bandwidth Rate in kbps.
+            "
+        ::= { wlsrStaStatsEntry 26 }
+
+-- This table breaks down the Station statistics into different
+-- rate categories.
+
+   wlsrStaRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrStaRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but represented in terms of rate categories.
+		"
+	
+      ::= { wlsrStatsStaGroup 2 } 
+
+     wlsrStaRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrStaRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	" Station Rate Stats Table"
+	  INDEX { wlsrStaAddress}
+      ::= { wlsrStaRateStatsTable 1 } 
+	
+     WlsrStaRateStatsEntry ::=
+     SEQUENCE {
+		 wlsrStaTxPktsAt1Mbps			Counter32  ,
+		 wlsrStaTxBytesAt1Mbps			Counter32  ,
+		 wlsrStaTxPktsAt2Mbps			Counter32  ,
+		 wlsrStaTxBytesAt2Mbps			Counter32  ,
+		 wlsrStaTxPktsAt5Mbps			Counter32  ,
+		 wlsrStaTxBytesAt5Mbps			Counter32  ,
+		 wlsrStaTxPktsAt11Mbps			Counter32  ,
+		 wlsrStaTxBytesAt11Mbps			Counter32  ,
+		 wlsrStaTxPktsAt6Mbps			Counter32  ,
+		 wlsrStaTxBytesAt6Mbps			Counter32  ,
+		 wlsrStaTxPktsAt12Mbps			Counter32  ,
+		 wlsrStaTxBytesAt12Mbps			Counter32  ,
+		 wlsrStaTxPktsAt18Mbps			Counter32  ,
+		 wlsrStaTxBytesAt18Mbps			Counter32  ,
+		 wlsrStaTxPktsAt24Mbps			Counter32  ,
+		 wlsrStaTxBytesAt24Mbps			Counter32  ,
+		 wlsrStaTxPktsAt36Mbps			Counter32  ,
+		 wlsrStaTxBytesAt36Mbps			Counter32  ,
+		 wlsrStaTxPktsAt48Mbps			Counter32  ,
+		 wlsrStaTxBytesAt48Mbps			Counter32  ,
+		 wlsrStaTxPktsAt54Mbps			Counter32  ,
+		 wlsrStaTxBytesAt54Mbps			Counter32  ,
+		 wlsrStaRxPktsAt1Mbps			Counter32  ,
+		 wlsrStaRxBytesAt1Mbps			Counter32  ,
+		 wlsrStaRxPktsAt2Mbps			Counter32  ,
+		 wlsrStaRxBytesAt2Mbps			Counter32  ,
+		 wlsrStaRxPktsAt5Mbps			Counter32  ,
+		 wlsrStaRxBytesAt5Mbps			Counter32  ,
+		 wlsrStaRxPktsAt11Mbps			Counter32  ,
+		 wlsrStaRxBytesAt11Mbps			Counter32  ,
+		 wlsrStaRxPktsAt6Mbps			Counter32  ,
+		 wlsrStaRxBytesAt6Mbps			Counter32  ,
+		 wlsrStaRxPktsAt12Mbps			Counter32  ,
+		 wlsrStaRxBytesAt12Mbps			Counter32  ,
+		 wlsrStaRxPktsAt18Mbps			Counter32  ,
+		 wlsrStaRxBytesAt18Mbps			Counter32  ,
+		 wlsrStaRxPktsAt24Mbps			Counter32  ,
+		 wlsrStaRxBytesAt24Mbps			Counter32  ,
+		 wlsrStaRxPktsAt36Mbps			Counter32  ,
+		 wlsrStaRxBytesAt36Mbps			Counter32  ,
+		 wlsrStaRxPktsAt48Mbps			Counter32  ,
+		 wlsrStaRxBytesAt48Mbps			Counter32  ,
+		 wlsrStaRxPktsAt54Mbps			Counter32  ,
+		 wlsrStaRxBytesAt54Mbps			Counter32 
+
+
+     }
+
+     wlsrStaTxPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 1 }
+
+     wlsrStaTxBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 2 }
+
+     wlsrStaTxPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 3 }
+
+     wlsrStaTxBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 4 }
+
+     wlsrStaTxPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 5 }
+
+     wlsrStaTxBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 6 }
+
+     wlsrStaTxPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 7 }
+
+     wlsrStaTxBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 8 }
+
+     wlsrStaTxPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 9 }
+
+     wlsrStaTxBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 10 }
+
+     wlsrStaTxPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 11 }
+
+     wlsrStaTxBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 12 }
+
+     wlsrStaTxPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 13 }
+
+     wlsrStaTxBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 14 }
+
+     wlsrStaTxPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 15 }
+
+     wlsrStaTxBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 16 }
+
+     wlsrStaTxPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 17 }
+
+     wlsrStaTxBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 18 }
+
+     wlsrStaTxPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 19 }
+
+     wlsrStaTxBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 20 }
+
+     wlsrStaTxPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 21 }
+
+     wlsrStaTxBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 22 }
+
+     wlsrStaRxPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 23 }
+
+     wlsrStaRxBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 24 }
+
+     wlsrStaRxPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 25 }
+
+     wlsrStaRxBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 26 }
+
+     wlsrStaRxPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 27 }
+
+     wlsrStaRxBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 28 }
+
+     wlsrStaRxPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 29 }
+
+     wlsrStaRxBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 30 }
+
+     wlsrStaRxPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 31 }
+
+     wlsrStaRxBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 32 }
+
+     wlsrStaRxPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 33 }
+
+     wlsrStaRxBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 34 }
+
+     wlsrStaRxPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 35 }
+
+     wlsrStaRxBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 36 }
+
+     wlsrStaRxPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 37 }
+
+     wlsrStaRxBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 38 }
+
+     wlsrStaRxPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 39 }
+
+     wlsrStaRxBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 40 }
+
+     wlsrStaRxPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 41 }
+
+     wlsrStaRxBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 42 }
+
+     wlsrStaRxPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 43 }
+
+     wlsrStaRxBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsrStaRateStatsEntry 44 }
+
+-- This table breaks down the Station statistics based on the
+-- Destination Address Types. 
+
+   wlsrStaDATypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrStaDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but broken down in terms of Destination Address Type. 
+		"
+      ::= { wlsrStatsStaGroup 3 } 
+
+     wlsrStaDATypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrStaDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Statistics based on the Destination Address Type."
+	  INDEX { wlsrStaAddress}
+      ::= { wlsrStaDATypeStatsTable 1 } 
+	
+     WlsrStaDATypeStatsEntry ::=
+     SEQUENCE {
+		 wlsrStaTxDABroadcastPkts		Counter32  ,
+		 wlsrStaTxDABroadcastBytes		Counter32  ,
+		 wlsrStaTxDAMulticastPkts		Counter32  ,
+		 wlsrStaTxDAMulticastBytes		Counter32  ,
+		 wlsrStaTxDAUnicastPkts			Counter32  ,
+		 wlsrStaTxDAUnicastBytes		Counter32  
+
+     }
+
+     wlsrStaTxDABroadcastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Broadcast packets 
+			 transmitted by this Station.
+            "
+        ::= { wlsrStaDATypeStatsEntry 1 }
+
+     wlsrStaTxDABroadcastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Broadcast Bytes 
+			 transmitted by this Station.
+            "
+        ::= { wlsrStaDATypeStatsEntry 2 }
+
+     wlsrStaTxDAMulticastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Multicast packets 
+			 transmitted by this station.
+            "
+        ::= { wlsrStaDATypeStatsEntry 3 }
+
+     wlsrStaTxDAMulticastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Multicast Bytes 
+			 transmitted by this station.
+            "
+        ::= { wlsrStaDATypeStatsEntry 4 }
+
+     wlsrStaTxDAUnicastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total of Unicast packets 
+			 transmitted by this station.
+            "
+        ::= { wlsrStaDATypeStatsEntry 5 }
+
+     wlsrStaTxDAUnicastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total of Unicast Bytes 
+			 transmitted by this station.
+            "
+        ::= { wlsrStaDATypeStatsEntry 6 }
+
+-- This table breaks down the Station statistics based on the
+-- the Type of the Packet. 
+
+   wlsrStaFrameTypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrStaFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but broken down into different Frame Types. 
+		"
+      ::= { wlsrStatsStaGroup 4 } 
+
+     wlsrStaFrameTypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrStaFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Frame Type Stats Entry."
+	  INDEX { wlsrStaAddress}
+      ::= { wlsrStaFrameTypeStatsTable 1 } 
+	
+     WlsrStaFrameTypeStatsEntry ::=
+     SEQUENCE {
+		 wlsrStaTxMgmtPkts		Counter32  ,
+		 wlsrStaTxMgmtBytes		Counter32  ,
+		 wlsrStaTxCtrlPkts		Counter32  ,
+		 wlsrStaTxCtrlBytes		Counter32  ,
+		 wlsrStaTxDataPkts		Counter32  ,
+		 wlsrStaTxDataBytes		Counter32  ,
+		 wlsrStaRxMgmtPkts		Counter32  ,
+		 wlsrStaRxMgmtBytes		Counter32  ,
+		 wlsrStaRxCtrlPkts		Counter32  ,
+		 wlsrStaRxCtrlBytes		Counter32  ,
+		 wlsrStaRxDataPkts		Counter32  ,
+		 wlsrStaRxDataBytes		Counter32  
+
+     }
+
+     wlsrStaTxMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Management packets 
+			 from a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 1 }
+
+     wlsrStaTxMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Management Bytes 
+			 from a station
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 2 }
+
+     wlsrStaTxCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Control packets 
+			 from a station
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 3 }
+
+     wlsrStaTxCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Control Bytes 
+			 from a station
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 4 }
+
+     wlsrStaTxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Data packets 
+			 from a station
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 5 }
+
+     wlsrStaTxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Data Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 6 }
+
+     wlsrStaRxMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Management packets 
+			 at a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 7 }
+
+     wlsrStaRxMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Management Bytes 
+			 at a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 8 }
+
+     wlsrStaRxCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Control packets 
+			 at a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 9 }
+
+     wlsrStaRxCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Control Bytes 
+			 at a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 10 }
+
+     wlsrStaRxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Data packets 
+			 at a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 11 }
+
+     wlsrStaRxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Data Bytes 
+			 at a station.
+            "
+        ::= { wlsrStaFrameTypeStatsEntry 12 }
+
+-- This table breaks down the Station statistics received or transmitted by a 
+-- station into packet size buckets. 
+
+   wlsrStaPktSizeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrStaPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per channel Packet and Byte Counts
+		but broken down into different Packet Sizes. 
+		"
+      ::= { wlsrStatsStaGroup 5 } 
+
+     wlsrStaPktSizeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsrStaPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Packet Size Stats."
+	  INDEX { wlsrStaAddress}
+      ::= { wlsrStaPktSizeStatsTable 1 } 
+	
+     WlsrStaPktSizeStatsEntry ::=
+     SEQUENCE {
+		 wlsrStaTxPkts63Bytes		Counter32  ,
+		 wlsrStaTxPkts64To127		Counter32  ,
+		 wlsrStaTxPkts128To255		Counter32  ,
+		 wlsrStaTxPkts256To511		Counter32  ,
+		 wlsrStaTxPkts512To1023	Counter32  ,
+		 wlsrStaTxPkts1024To1518	Counter32  ,
+		 wlsrStaRxPkts63Bytes		Counter32  ,
+		 wlsrStaRxPkts64To127		Counter32  ,
+		 wlsrStaRxPkts128To255		Counter32  ,
+		 wlsrStaRxPkts256To511		Counter32  ,
+		 wlsrStaRxPkts512To1023	Counter32  ,
+		 wlsrStaRxPkts1024To1518	Counter32  
+
+     }
+
+     wlsrStaTxPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were less than 64 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 1 }
+
+     wlsrStaTxPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 64 and 127 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 2 }
+
+     wlsrStaTxPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 128 and 255 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 3 }
+
+     wlsrStaTxPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 256 and 511 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 4 }
+
+     wlsrStaTxPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 5 }
+
+     wlsrStaTxPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 6 }
+
+     wlsrStaRxPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were less than 64 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 7 }
+
+     wlsrStaRxPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 64 and 127 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 8 }
+
+     wlsrStaRxPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 128 and 255 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 9 }
+
+     wlsrStaRxPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 256 and 511 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 10 }
+
+     wlsrStaRxPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 11 }
+
+     wlsrStaRxPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsrStaPktSizeStatsEntry 12 }
+
+-- Air Monitor Access Point List Table. On an Air monitor this table lists all
+-- the Access Points the AM is monitoring. On an Access Point, this table 
+-- contains itself.
+
+   wlsrAirMonitorApListTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsrAirMonitorApListEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table contains all the Access Points monitored by the AM.
+		"
+      ::= { wlsrAirMonitorGroup 1 } 
+
+     wlsrAirMonitorApListEntry OBJECT-TYPE 
+	  SYNTAX       WlsrAirMonitorApListEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Ap List Entry"
+	  INDEX { wlsrAmApBSSID}
+      ::= { wlsrAirMonitorApListTable 1 } 
+	
+     WlsrAirMonitorApListEntry ::=
+     SEQUENCE {
+		 wlsrAmApBSSID		MacAddress  ,
+		 wlsrAmSSID			DisplayString ,
+		 wlsrAmChannel		INTEGER ,
+		 wlsrAmPhysicalType	INTEGER , 
+		 wlsrAmAccessPointType		INTEGER ,
+		 wlsrAmRAPType				INTEGER,
+		 wlsrAmRSSI				Integer32,
+		 wlsrAmMonitoredTime	TimeTicks,
+		 wlsrAmInactivityTime	TimeTicks,
+		 wlsrAmLoadBalancing	INTEGER
+
+     }
+
+     wlsrAmApBSSID OBJECT-TYPE
+         SYNTAX       MacAddress  
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the Access Point.
+            "
+        ::= { wlsrAirMonitorApListEntry 1 }
+
+     wlsrAmSSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..62))  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This attribute indicates the SSID of the AP.
+            "
+        ::= { wlsrAirMonitorApListEntry 2 }
+
+     wlsrAmChannel OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This attribute indicates the channel on which this AP is
+				operating.
+            "
+        ::= { wlsrAirMonitorApListEntry 3 }
+
+     wlsrAmPhysicalType OBJECT-TYPE
+         SYNTAX       INTEGER{
+							dot11b(1),
+							dot11a(2),
+							dot11g(3)
+					   }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This attribute indicates the physical layer type.
+            "
+        ::= { wlsrAirMonitorApListEntry 4 }
+
+
+     wlsrAmAccessPointType OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				genericAp(1),
+						softAp(2),
+						ciscoAp(3)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This attribute indicates the type of AP.
+            "
+        ::= { wlsrAirMonitorApListEntry 5 }
+
+     wlsrAmRAPType OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				valid(1),
+						interfering(2),
+						unsecure(3),
+						dos(4),
+						unknown(5)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				Type of the Access Point.
+            "
+        ::= { wlsrAirMonitorApListEntry 6 }
+
+     wlsrAmRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				Access point Receiver Signal Strength Indicator.
+				
+            "
+        ::= { wlsrAirMonitorApListEntry 7 }
+		
+     wlsrAmMonitoredTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time in ticks, since the AM is observing this access point.
+            "
+        ::= { wlsrAirMonitorApListEntry 8 }
+
+     wlsrAmInactivityTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				Access point Inactivity Time.
+				
+            "
+        ::= { wlsrAirMonitorApListEntry 9 }
+
+     wlsrAmLoadBalancing OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				enable(1),
+						disable(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				The attributes indicates whether Load balancing is enabled 
+				for this access point.
+				
+            "
+        ::= { wlsrAirMonitorApListEntry 10 }
+
+-- wlsrTrapsGroup
+-- This group defines all the traps generated by the access points.
+
+-- Objects defined under this group does not have support for
+-- GET or SET. They are defined in the MIB to pass specific
+-- information. which has meaning only in the context of a trap.
+
+wlsrTrapObjectsGroup         	OBJECT IDENTIFIER ::= { wlsrTrapsGroup 100 }
+
+wlsrTargetApBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the BSSID of the
+				Access Point, for which we are raising the trap. If an
+				Air Monitor is sending the trap then this will indicate 
+				AP. If an Access Point is sending the trap, then it will point
+				to itself.
+            "
+::= { wlsrTrapObjectsGroup 1 }
+
+wlsrTargetApSSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the SSID of the
+				Access Point, for which we are raising the trap. If an
+				Air Monitor is sending the trap then this will indicate 
+				AP. If an Access Point is sending the trap, then it will point
+				to itself.
+            "
+::= { wlsrTrapObjectsGroup 2 }
+
+wlsrTargetApChannel OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the Channel of the
+				Access Point, for which we are raising the trap. If an
+				Air Monitor is sending the trap then this will indicate 
+				AP. If an Access Point is sending the trap, then it will point
+				to itself.
+            "
+::= { wlsrTrapObjectsGroup 3 }
+
+wlsrSourceMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the MAC
+				address of the Source.
+			"
+::= { wlsrTrapObjectsGroup 4 }
+
+wlsrNodeMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the MAC
+				address of a Node.
+			"
+::= { wlsrTrapObjectsGroup 5 }
+
+wlsrFrameType OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				associateRequest(1),
+						associateResponse(2),
+						reassociateRequest(3),
+						reassociateResponse(4),
+						probeRequest(5),
+						probeResponse(6),
+						beacon(9),
+						atim(10),
+						disassociate(11),
+						auth(12),
+						deauth(13)
+					   }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the
+				Frame Type.
+			"
+::= { wlsrTrapObjectsGroup 6 }
+
+wlsrAddressType OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				srcAddress(1),
+						dstAddress(2),
+						bssid(3)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the
+				Address Type.
+			"
+::= { wlsrTrapObjectsGroup 7 }
+
+wlsrSignatureName OBJECT-TYPE
+         SYNTAX       OCTET STRING (SIZE (0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the
+				Signature Name.
+			"
+::= { wlsrTrapObjectsGroup 8 }
+
+wlsrMatchedMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the
+				Macaddress.
+			"
+::= { wlsrTrapObjectsGroup 9 }
+
+wlsrMatchedIp OBJECT-TYPE
+        SYNTAX      IpAddress 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the
+				Ip Address.
+			"
+::= { wlsrTrapObjectsGroup 10 }
+
+wlsrReceiverMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the MAC
+				address of the Receiver.
+			"
+::= { wlsrTrapObjectsGroup 11 }
+
+wlsrTransmitterMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the MAC
+				address of the Transmitter.
+			"
+::= { wlsrTrapObjectsGroup 12 }
+
+wlsrRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the 
+				Signal Strength Indicator.
+			"
+::= { wlsrTrapObjectsGroup 13 }
+
+wlsrRogueInfoURL OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..256))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used to point to the WEBGUI Rogue AP information 
+				URL.
+			"
+::= { wlsrTrapObjectsGroup 14 }
+
+wlsrInterferingAPInfoURL OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..256))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used to point to the WEBGUI Rogue interfering 
+				AP information URL.
+			"
+::= { wlsrTrapObjectsGroup 15 }
+
+
+wlsrUnsecureApDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+	         wlsrLocation, wlsrCurrentChannel, wlsrMatchedMac, 
+			 wlsrMatchedIp, wlsrRogueInfoURL}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Unsecure Access Point is detected
+			by an Air Monitor located at wlsrLocation on channel 
+			wlsrCurrentChannel. The AP is declared unsecure, because we 
+			matched it to the wlsrMatchedMac/wlsrMatchedIp.
+
+		"
+    ::= { wlsrTrapsGroup 1001 }
+
+wlsrStaImpersonation NOTIFICATION-TYPE        
+	OBJECTS {wlsrNodeMac, wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM at location wlsrLocation detected
+			a Station impersonation.
+		"
+    ::= { wlsrTrapsGroup 1002 }
+wlsrReservedChannelViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+				wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point is detected
+			by an AP at location wlsrLocation, which
+			violates the Reserved Channel configuration.
+		"
+    ::= { wlsrTrapsGroup 1003 }
+
+
+wlsrValidSSIDViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			  wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an Access Point violating Valid SSID is 
+		detected by an AP at wlsrLocation.
+		"
+    ::= { wlsrTrapsGroup 1004 }
+
+wlsrChannelMisconfiguration NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point has a bad channel
+			configuration.
+		"
+    ::= { wlsrTrapsGroup 1005 }
+
+
+wlsrOUIMisconfiguration NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point has bad OUI
+			configuration.
+		"
+    ::= { wlsrTrapsGroup 1006 }
+
+
+wlsrSSIDMisconfiguration NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point has bad SSID
+			configuration.
+		"
+    ::= { wlsrTrapsGroup 1007 }
+
+wlsrShortPreableMisconfiguration NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point has bad Short preamble
+			configuration.
+		"
+    ::= { wlsrTrapsGroup 1008 }
+
+
+wlsrWPAMisconfiguration NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point has bad WPA
+			configuration.
+		"
+    ::= { wlsrTrapsGroup 1009 }
+
+
+wlsrAdhocNetworkDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM has detected an Adhoc
+			network.
+		"
+    ::= { wlsrTrapsGroup 1010 }
+
+
+wlsrStaPolicyViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrNodeMac, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that a Valid Station policy is violated.
+		"
+    ::= { wlsrTrapsGroup 1011 }
+
+
+wlsrRepeatWEPIVViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM detected a Repeat WEP-IV violation.
+		"
+    ::= { wlsrTrapsGroup 1012 }
+
+wlsrWeakWEPIVViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM detected a Weak WEP-IV violation.
+		"
+    ::= { wlsrTrapsGroup 1013 }
+
+wlsrChannelInterferenceDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation has detected a channel interference on
+			wlsrCurrentChannel.
+		"
+    ::= { wlsrTrapsGroup 1014 }
+
+wlsrAPInterferenceDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation has detected an AP interference on
+			wlsrCurrentChannel.
+		"
+    ::= { wlsrTrapsGroup 1015 }
+
+wlsrStaInterferenceDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation has detected a Station interference on
+			wlsrCurrentChannel.
+		"
+    ::= { wlsrTrapsGroup 1016 }
+
+wlsrFrameRetryRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded
+			an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID.
+		"
+    ::= { wlsrTrapsGroup 1017 }
+
+wlsrFrameReceiveErrorRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrTargetApChannel, wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded
+			an upper threshold for Frame Receive Error Rate for AP 
+			wlsrTargetApBSSID.
+		"
+    ::= { wlsrTrapsGroup 1018 }
+
+wlsrFrameFragmentationRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrTargetApChannel, wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded
+			an upper threshold for Frame Fragmentation Rate for AP 
+			wlsrTargetApBSSID.
+		"
+    ::= { wlsrTrapsGroup 1019 }
+
+wlsrFrameBandWidthRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that a station wlsrStaAddress has exceeded
+			the allocated Bandwidth rate. 
+		"
+    ::= { wlsrTrapsGroup 1020 }
+
+
+wlsrFrameLowSpeedRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that a station wlsrStaAddress has exceeded
+			the Low speed rate. 
+		"
+    ::= { wlsrTrapsGroup 1021 }
+
+wlsrFrameNonUnicastRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that a station wlsrStaAddress has exceeded
+			the Non Unicast traffic rate. 
+		"
+    ::= { wlsrTrapsGroup 1022 }
+
+wlsrLoadbalancingEnabled NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID 
+			has enabled Load balancing.
+		"
+    ::= { wlsrTrapsGroup 1023 }
+
+wlsrChannelFrameRetryRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that it exceeded an upper threshold
+			for Frame Retry Rate. 
+		"
+    ::= { wlsrTrapsGroup 1024 }
+
+wlsrChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that it exceeded an upper threshold
+			for Frame Fragmentation Rate. 
+		"
+    ::= { wlsrTrapsGroup 1025 }
+
+
+wlsrChannelFrameErrorRateExceeded NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that it exceeded an upper threshold
+			for Frame Error Rate. 
+		"
+    ::= { wlsrTrapsGroup 1026 }
+
+wlsrSignatureMatch NOTIFICATION-TYPE        
+	OBJECTS {wlsrSignatureName, wlsrSourceMac,wlsrRSSI,
+			 wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that we detected a signature match.
+		"
+    ::= { wlsrTrapsGroup 1027 }
+
+wlsrChannelRateAnomaly NOTIFICATION-TYPE        
+	OBJECTS {wlsrFrameType, wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation detected
+		frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the
+		configured IDS rate threshold.
+		"
+    ::= { wlsrTrapsGroup 1028 }
+
+wlsrNodeRateAnomaly NOTIFICATION-TYPE        
+	OBJECTS {wlsrFrameType, wlsrNodeMac, wlsrRSSI,
+			 wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation detected
+		frames of type wlsrFrameType transmitted by node wlsrNodeMac 
+		which exceeds the configured IDS rate threshold.
+		"
+    ::= { wlsrTrapsGroup 1029 }
+
+wlsrEAPRateAnomaly NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that the number of EAP Handshake packets received 
+		by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake 
+		rate.
+		"
+    ::= { wlsrTrapsGroup 1030 }
+
+wlsrSignalAnomaly NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation detected a Signal 
+		Anomaly on wlsrCurrentChannel.
+		"
+    ::= { wlsrTrapsGroup 1031 }
+
+wlsrSequenceNumberAnomaly NOTIFICATION-TYPE        
+	OBJECTS {wlsrSourceMac, wlsrRSSI, wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation received packets
+		which exceeds the acceptable sequence number difference. The acceptable
+		sequence number difference is an IDS Configuration object.
+		"
+    ::= { wlsrTrapsGroup 1032 }
+
+wlsrDisconnectStationAttack NOTIFICATION-TYPE        
+	OBJECTS {wlsrFrameType, wlsrSourceMac, wlsrRSSI, wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM detected a station Disconnect attack.
+		"
+    ::= { wlsrTrapsGroup 1033 }
+
+wlsrApFloodAttack NOTIFICATION-TYPE        
+	OBJECTS {wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap is triggered when the number of spurious AP's detected by 
+		an AP/AM at wlsrLocation exceeds the configured IDS threshold.
+		"
+    ::= { wlsrTrapsGroup 1034 }
+
+wlsrAdhocNetwork NOTIFICATION-TYPE        
+	OBJECTS {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrRSSI, 
+			 wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation detected an Adhoc 
+		Network. Node wlsrSourceMac is connected to an adhoc AP
+		wlsrTargetApBSSID with wlsrTargetApSSID ssid.
+		"
+    ::= { wlsrTrapsGroup 1035 }
+
+wlsrWirelessBridge NOTIFICATION-TYPE        
+	OBJECTS {wlsrTransmitterMac, wlsrReceiverMac, wlsrRSSI, 
+			 wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation detected a Wireless 
+		Bridge. The detected bridge is between wlsrSourceMac and 
+		wlsrReceiverMac.
+		"
+    ::= { wlsrTrapsGroup 1036 }
+
+wlsrInvalidMacOUI NOTIFICATION-TYPE        
+	OBJECTS {wlsrAddressType, wlsrNodeMac,wlsrRSSI,
+			 wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM at wlsrLocation detected an Invalid
+		MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is
+		the <wlsrAddressType>.
+		"
+    ::= { wlsrTrapsGroup 1037 }
+
+wlsrLoadbalancingDisabled NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			 wlsrTargetApChannel, wlsrLocation}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM/AP located at 
+			wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID 
+			has disabled Load balancing.
+		"
+    ::= { wlsrTrapsGroup 1038 }
+
+wlsrWEPMisconfiguration NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Access Point has bad WEP
+			configuration.
+		"
+    ::= { wlsrTrapsGroup 1039 }
+
+
+wlsrStaRepeatWEPIVViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac,
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM detected a Repeat WEP-IV violation.
+		for a Station
+		"
+    ::= { wlsrTrapsGroup 1040 }
+
+wlsrStaWeakWEPIVViolation NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac,
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+		This trap indicates that an AP/AM detected a Weak WEP-IV violation.
+		for a Station
+		"
+    ::= { wlsrTrapsGroup 1041 }
+
+wlsrStaAssociatedToUnsecureAp NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+	         wlsrLocation, wlsrCurrentChannel, wlsrNodeMac, wlsrRogueInfoURL}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that a station with wlsrNodeMac associated
+			with an Unsecure Access Point wlsrTargetApBSSID. This is detected
+			by an Air Monitor located at wlsrLocation on channel 
+			wlsrCurrentChannel. 
+
+		"
+    ::= { wlsrTrapsGroup 1042 }
+
+wlsrAdhocNetworkBridgeDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, 
+			wlsrLocation, wlsrCurrentChannel}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an AM has detected an Adhoc
+			network that is bridging to a wired network
+		"
+    ::= { wlsrTrapsGroup 1043 }
+
+wlsrInterferingApDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, 
+	         wlsrLocation, wlsrCurrentChannel, wlsrInterferingAPInfoURL}
+    STATUS  current
+    DESCRIPTION
+		"
+			This trap indicates that an Interfering Access Point is detected
+			by an Air Monitor located at wlsrLocation on channel 
+			wlsrCurrentChannel. 
+
+		"
+    ::= { wlsrTrapsGroup 1044 }
+
+END
+
+
diff --git a/MIBS/arubaos/WLSX-AUTH-MIB b/MIBS/arubaos/WLSX-AUTH-MIB
new file mode 100644
index 0000000..1d832e7
--- /dev/null
+++ b/MIBS/arubaos/WLSX-AUTH-MIB
@@ -0,0 +1,399 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-AUTH-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB
+
+	   ArubaEnableValue,
+	   ArubaAuthenticationMethods,
+	   ArubaEncryptionMethods,
+	   ArubaHashAlgorithms,
+	   ArubaAuthServerType
+	   		FROM ARUBA-TC;
+
+   wlsxAuthMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+						Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+	    	Fax:		408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the authentication servers known to an 
+			Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 8 }
+
+   wlsxAuthenticationServerGroup     	OBJECT IDENTIFIER ::= { wlsxAuthMIB 1 }
+   wlsxAuthenticationInfoGroup     	OBJECT IDENTIFIER ::= { wlsxAuthMIB 2 }
+   wlsxAuthenticationGroup     	OBJECT IDENTIFIER ::= { wlsxAuthMIB 3 }
+
+-- wlsxAuthenticationServerGroup contains information about the authentication
+-- servers in the controller.
+
+   wlsxAuthenticationServerTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxAuthenticationServerEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the authentication servers currently
+			configured in the controller. Servers are identified by name.
+		"
+	
+      ::= { wlsxAuthenticationServerGroup 1 } 
+
+   wlsxAuthenticationServerEntry OBJECT-TYPE 
+	  SYNTAX       WlsxAuthenticationServerEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Server entry"
+	  INDEX { authServerName }
+      ::= { wlsxAuthenticationServerTable 1 } 
+
+   WlsxAuthenticationServerEntry ::=
+     SEQUENCE {
+
+		authServerName 					DisplayString,
+		authServerType					ArubaAuthServerType,
+		authServerAddress				DisplayString,
+		authServerPort					Integer32,
+		authServerRetryCount			Integer32,
+		authServerTimeOutValue			Integer32,
+		authServerState					ArubaEnableValue,
+		authServerInservice				TruthValue,
+		authServerUsageCount			Counter32,
+		authServerSuccessfullAuths		Counter32,
+		authServerFailedAuths			Counter32,
+		authServerTimeouts				Counter32,
+		authServerAvgResponseTime		Integer32,
+		authServerOutStandingRequests	Integer32,
+		authServerUptime				Integer32
+
+     }
+
+    authServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of the authentication server.
+            "
+        ::= { wlsxAuthenticationServerEntry 1 }
+
+    authServerType OBJECT-TYPE
+         SYNTAX       ArubaAuthServerType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The type of the authentication server.
+            "
+        ::= { wlsxAuthenticationServerEntry 2 }
+
+    authServerAddress OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..48))
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "
+			The IP address of the authentication server.
+            "
+        ::= { wlsxAuthenticationServerEntry 3 }
+
+    authServerPort OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "
+			The transport layer port of the authentication server.
+            "
+        ::= { wlsxAuthenticationServerEntry 4 }
+
+    authServerRetryCount OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "
+			The configured retry count.
+            "
+        ::= { wlsxAuthenticationServerEntry 5 }
+
+    authServerTimeOutValue OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "
+			The configured timeout value.
+            "
+        ::= { wlsxAuthenticationServerEntry 6 }
+
+    authServerState OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The state of the authentication server.
+            "
+        ::= { wlsxAuthenticationServerEntry 7 }
+
+    authServerInservice OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			An indication of whether or not the authentication server is
+			 in service.
+            "
+        ::= { wlsxAuthenticationServerEntry 8 }
+
+    authServerUsageCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of times this server was queried.
+            "
+        ::= { wlsxAuthenticationServerEntry 9 }
+
+    authServerSuccessfullAuths OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of times this server responded with success.
+            "
+        ::= { wlsxAuthenticationServerEntry 10 }
+
+    authServerFailedAuths OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of times this server responded with failure.
+            "
+        ::= { wlsxAuthenticationServerEntry 11 }
+
+    authServerTimeouts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of times this communication with this server timed out.
+            "
+        ::= { wlsxAuthenticationServerEntry 12 }
+
+    authServerAvgResponseTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The average response time of the server in milliseconds.
+            "
+        ::= { wlsxAuthenticationServerEntry 13 }
+
+    authServerOutStandingRequests OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of requests currently outstanding to this server.
+            "
+        ::= { wlsxAuthenticationServerEntry 14 }
+
+    authServerUptime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The time since the server went into service with the controller.
+            "
+        ::= { wlsxAuthenticationServerEntry 15 }
+
+   wlsxPortalServerTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxPortalServerEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table lists configured captive portal servers.
+		"
+	
+      ::= { wlsxAuthenticationServerGroup 2 } 
+
+   wlsxPortalServerEntry OBJECT-TYPE 
+	  SYNTAX       WlsxPortalServerEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Portal Server Entry"
+	  INDEX { portalServerIndex }
+      ::= { wlsxPortalServerTable 1 } 
+
+   WlsxPortalServerEntry ::=
+     SEQUENCE {
+		portalServerIndex 				DisplayString,
+		portalServerHost 				DisplayString,
+		portalServerPort 				Integer32,
+		portalServerPage 				DisplayString,
+		portalServerProtocol			DisplayString
+     }
+
+    portalServerIndex OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..256))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+            "
+        ::= { wlsxPortalServerEntry 1 }
+
+    portalServerHost OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..256))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The IP address of the portal server.
+            "
+        ::= { wlsxPortalServerEntry 2 }
+
+    portalServerPort OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The transport layer port of the portal server.
+            "
+        ::= { wlsxPortalServerEntry 3 }
+
+    portalServerPage OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..256))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The portal server URL
+            "
+        ::= { wlsxPortalServerEntry 4 }
+
+    portalServerProtocol OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The portal server protocol (e.g. HTTP or HTTPS)
+            "
+        ::= { wlsxPortalServerEntry 5 }
+
+   -- LDAP Server Specific State
+
+   wlsxLdapServerStateTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxLdapServerStateEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		"
+      ::= { wlsxAuthenticationServerGroup 5 } 
+
+   wlsxLdapServerStateEntry OBJECT-TYPE 
+	  SYNTAX       WlsxLdapServerStateEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "LDAP Server Entry"
+	  INDEX { authServerName }
+      ::= { wlsxLdapServerStateTable 1 } 
+
+   WlsxLdapServerStateEntry ::=
+     SEQUENCE {
+	 	ldapInitDone				TruthValue,
+		ldapAdminBound				INTEGER,
+		ldapReBindCount				Counter32
+
+     }
+
+    ldapInitDone OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether the controller is initialized with the server.
+            "
+        ::= { wlsxLdapServerStateEntry 1 }
+
+    ldapAdminBound OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				no(1),
+						yes(2),
+						inProgress(3)
+		 			  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether the controller is bound to the server.
+            "
+        ::= { wlsxLdapServerStateEntry 2 }
+
+    ldapReBindCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of times that the controller re-bound with the server.
+            "
+        ::= { wlsxLdapServerStateEntry 3 }
+
+END
diff --git a/MIBS/arubaos/WLSX-CTS-MIB b/MIBS/arubaos/WLSX-CTS-MIB
new file mode 100644
index 0000000..e6f687b
--- /dev/null
+++ b/MIBS/arubaos/WLSX-CTS-MIB
@@ -0,0 +1,149 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-CTS-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxCtsMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+						Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+		    Fax:		408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the Controller Transport Service (Cts) in the 
+			Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 11 }
+
+   wlsxCtsOpGroup     	OBJECT IDENTIFIER ::= { wlsxCtsMIB 1 }
+
+   wlsxCtsRequestTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF WlsxCtsRequestEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION
+		"
+		"
+	::= { wlsxCtsOpGroup 1 }
+
+	wlsxCtsRequestEntry OBJECT-TYPE
+		SYNTAX WlsxCtsRequestEntry
+		MAX-ACCESS not-accessible
+		STATUS	current
+		DESCRIPTION
+			""
+		INDEX { wlsxCtsIndex }
+		::= { wlsxCtsRequestTable 1 }
+
+	WlsxCtsRequestEntry ::=
+		SEQUENCE {
+			wlsxCtsIndex	Integer32,
+			wlsxCtsOpcode	DisplayString,
+			wlsxCtsCookie	DisplayString,
+			wlsxCtsURL		DisplayString,
+			wlsxCtsFlags	BITS,
+			wlsxCtsStatus	RowStatus
+		}
+
+	wlsxCtsIndex OBJECT-TYPE
+		SYNTAX 	Integer32
+		MAX-ACCESS not-accessible
+		STATUS	current
+		DESCRIPTION
+			"
+				CTS transport index 
+				0 - Config Sync
+				1 - Counters Sync
+				2 - RF Plan Sync
+			"
+		::= { wlsxCtsRequestEntry 1 }
+
+	wlsxCtsOpcode OBJECT-TYPE
+		SYNTAX 	DisplayString
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				CTS operation opcode
+			"
+		::= { wlsxCtsRequestEntry 2 }
+
+	wlsxCtsCookie OBJECT-TYPE
+		SYNTAX 	DisplayString
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				Cookie for the config sync operation
+			"
+		::= { wlsxCtsRequestEntry 3 }
+
+	wlsxCtsURL OBJECT-TYPE
+		SYNTAX 	DisplayString
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				URL for the config sync operation
+			"
+		::= { wlsxCtsRequestEntry 4 }
+
+	wlsxCtsFlags OBJECT-TYPE
+		SYNTAX 	BITS {
+			wlsxCtsFlagForce(0),
+			wlsxCtsFlagUseCert(1)
+	    }
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				Operational flags to be sent via CTS
+			"
+		::= { wlsxCtsRequestEntry 5 }
+
+	wlsxCtsStatus OBJECT-TYPE
+		SYNTAX 	RowStatus
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				CTS row status
+			"
+		::= { wlsxCtsRequestEntry 6 }
+
+END
diff --git a/MIBS/arubaos/WLSX-ESI-MIB b/MIBS/arubaos/WLSX-ESI-MIB
new file mode 100644
index 0000000..4819c89
--- /dev/null
+++ b/MIBS/arubaos/WLSX-ESI-MIB
@@ -0,0 +1,193 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-ESI-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+	   ArubaESIServerMode,
+	   ArubaESIServerStatus
+	   		FROM ARUBA-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxESIMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+						Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+			Fax:		408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the External Services Interface (ESI) in the 
+			Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 10 }
+
+   wlsxESIConfigGroup     	OBJECT IDENTIFIER ::= { wlsxESIMIB 1 }
+
+   wlsxESIServerTable  OBJECT-TYPE 
+         SYNTAX       SEQUENCE OF WlsxESIServerEntry
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			This table lists all ESI servers configured on the controller.
+            "
+        ::= { wlsxESIConfigGroup 1 }
+
+	wlsxESIServerEntry OBJECT-TYPE
+		SYNTAX		WlsxESIServerEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"ESI Server Entry"
+			INDEX { esiServerName }
+		::= { wlsxESIServerTable 1 }
+
+		WlsxESIServerEntry ::= 
+		SEQUENCE {
+			esiServerName			DisplayString,
+			esiServerGroup			DisplayString,
+			esiServerMode			ArubaESIServerMode,
+			esiServerTrustedIP		IpAddress,
+			esiServerUntrustedIP	IpAddress,
+			esiServerTrustedSlot	Integer32,
+			esiServerTrustedPort	Integer32,
+			esiServerUntrustedSlot	Integer32,
+			esiServerUntrustedPort	Integer32,
+			esiServerStatus 		ArubaESIServerStatus,
+			esiServerTrustedModule	Integer32,
+			esiServerUntrustedModule Integer32
+		}
+
+	esiServerName OBJECT-TYPE
+		SYNTAX		DisplayString
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"The name of the ESI Server"
+		::= { wlsxESIServerEntry 1 }
+
+	esiServerGroup OBJECT-TYPE
+		SYNTAX		DisplayString
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The name of the ESI server group to which this server belongs."
+		::= { wlsxESIServerEntry 2 }
+
+	esiServerMode OBJECT-TYPE
+		SYNTAX		ArubaESIServerMode
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The mode of this server"
+		::= { wlsxESIServerEntry 3 }
+
+	esiServerTrustedIP OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The trusted IP address of this server, or 0.0.0.0 if it is not set"
+		::= { wlsxESIServerEntry 4 }
+
+	esiServerUntrustedIP OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"
+			 The untrusted IP address of this server, or 0.0.0.0 if it is 
+			 not set
+			 "
+		::= { wlsxESIServerEntry 5 }
+
+	esiServerTrustedSlot OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The slot number of the trusted interface for this server."
+		::= { wlsxESIServerEntry 6 }
+
+	esiServerTrustedPort OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The port number of the trusted interface for this server."
+		::= { wlsxESIServerEntry 7 }
+
+	esiServerUntrustedSlot OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The slot number of the untrusted interface for this server."
+		::= { wlsxESIServerEntry 8 }
+
+	esiServerUntrustedPort OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The port number of the untrusted interface for this server."
+		::= { wlsxESIServerEntry 9 }
+
+	esiServerStatus OBJECT-TYPE
+		SYNTAX		ArubaESIServerStatus
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Indicates the status of this ESI server."
+		::= { wlsxESIServerEntry 10 }
+
+	esiServerTrustedModule OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The module number of the trusted interface for this server."
+		::= { wlsxESIServerEntry 11 }
+
+	esiServerUntrustedModule OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"The module number of the untrusted interface for this server."
+		::= { wlsxESIServerEntry 12 }
+
+END
diff --git a/MIBS/arubaos/WLSX-HA-MIB b/MIBS/arubaos/WLSX-HA-MIB
new file mode 100644
index 0000000..97292af
--- /dev/null
+++ b/MIBS/arubaos/WLSX-HA-MIB
@@ -0,0 +1,711 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-HA-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB
+
+	   ArubaEnableValue,
+       ArubaHaRole,
+       ArubaHaConnectivityStatus
+	   		FROM ARUBA-TC;
+
+   wlsxHaMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide 
+            information about High Availability on Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 20 }
+
+   wlsxHighAvalabilityInfoGroup     	OBJECT IDENTIFIER ::= { wlsxHaMIB 1 }
+   wlsxHighAvalabilityTraps     	    OBJECT IDENTIFIER ::= { wlsxHaMIB 2 }
+
+-- wlsxHighAvalabilityInfoGroup contains information about the High Availability on Aruba controller
+
+   wlsxHighAvalabilityConfigTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxHighAvalabilityConfigEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists High Avalability configuration on the Aruba controller.
+		"
+	
+      ::= { wlsxHighAvalabilityInfoGroup 1 } 
+
+   wlsxHighAvalabilityConfigEntry OBJECT-TYPE 
+	  SYNTAX       WlsxHighAvalabilityConfigEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             " HA profile config entry " 
+	  INDEX { haProfileName }
+      ::= { wlsxHighAvalabilityConfigTable 1 } 
+
+   WlsxHighAvalabilityConfigEntry ::=
+     SEQUENCE {
+
+		haProfileName 					DisplayString,
+		haMembership				    DisplayString,
+		haState    					    ArubaEnableValue,
+		haRole    					    ArubaHaRole,
+		haPreemption				    ArubaEnableValue,
+		haOversubscription			    ArubaEnableValue,
+		haStateSync					    ArubaEnableValue,
+		haPresharedKey				    DisplayString,
+		haIntercontrollerHbt		    ArubaEnableValue,
+		haHbtThreshold					Unsigned32,
+		haHbtInterval        			Unsigned32
+     }
+
+    haProfileName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..63))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of the HA profile.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 1 }
+
+    haMembership OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..63))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of the HA profile enabled.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 2 }
+
+    haState OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The HA state.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 3 }
+    haRole OBJECT-TYPE
+         SYNTAX       ArubaHaRole
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The HA role of the controller.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 4 }
+
+    haPreemption OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			HA preemption.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 5 }
+
+    haOversubscription OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Standby capacity extension.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 6 }
+
+    haStateSync OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The HA state sync.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 7 }
+
+    haPresharedKey OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(8..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The IPSec key for statesync.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 8 }
+
+    haIntercontrollerHbt OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The state of intercontroller heart beat.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 9 }
+
+    haHbtThreshold OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Intercontroller hbt threshold above which it can trigger HA failover.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 10 }
+
+    haHbtInterval OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The frequency of inter controller heart beat.
+            "
+        ::= { wlsxHighAvalabilityConfigEntry 11 }
+
+
+-- HA AP table --
+   wlsxHighAvalabilityApTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxHighAvalabilityApEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists High Avalability AP counts on the Aruba controller.
+		"
+	
+      ::= { wlsxHighAvalabilityInfoGroup 2 } 
+
+   wlsxHighAvalabilityApEntry OBJECT-TYPE 
+	  SYNTAX       WlsxHighAvalabilityApEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             " HA AP entry " 
+	  INDEX { haProfileName }
+      ::= { wlsxHighAvalabilityApTable 1 } 
+
+   WlsxHighAvalabilityApEntry ::=
+     SEQUENCE {
+
+		haActiveAPs					Gauge,
+		haStandbyAPs       		    Gauge,
+		haTotalAPs       			Gauge
+     }
+
+    haActiveAPs OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of active APs.
+            "
+        ::= { wlsxHighAvalabilityApEntry 1 }
+
+    haStandbyAPs OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of standby APs.
+            "
+        ::= { wlsxHighAvalabilityApEntry 2 }
+
+    haTotalAPs OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of APs.
+            "
+        ::= { wlsxHighAvalabilityApEntry 3 }
+
+
+-- HA intercontroller hbt status table --
+
+   wlsxIntercontrollerHbtTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxIntercontrollerHbtEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists inter controller heart beat status.
+		"
+	
+      ::= { wlsxHighAvalabilityInfoGroup 3 } 
+
+   wlsxIntercontrollerHbtEntry OBJECT-TYPE 
+	  SYNTAX       WlsxIntercontrollerHbtEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             " HA hbt entry " 
+	  INDEX { haActiveCtrl }
+      ::= { wlsxIntercontrollerHbtTable 1 } 
+
+   WlsxIntercontrollerHbtEntry ::=
+     SEQUENCE {
+        haActiveCtrl				DisplayString,
+        haActiveCtrlIp				DisplayString,
+		haReferenceCnt	  			Gauge,
+		haTotalHbtRequestsSent		Counter32,
+		haTotalHbtResponsesRcvd	    Counter32,
+		haLastMissedHbtCnt			Gauge,
+		haLastHbtMissedTime			DisplayString
+     }
+
+    haActiveCtrl OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The IP address of the actve controller(Key).
+            "
+        ::= { wlsxIntercontrollerHbtEntry 1 }
+
+    haActiveCtrlIp OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The IP address of the actve controller.
+            "
+        ::= { wlsxIntercontrollerHbtEntry 2 }
+
+
+    haReferenceCnt OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of standby APs.
+            "
+        ::= { wlsxIntercontrollerHbtEntry 3 }
+
+    haTotalHbtRequestsSent OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of hbt requests sent.
+            "
+        ::= { wlsxIntercontrollerHbtEntry 4 }
+
+    haTotalHbtResponsesRcvd OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of heart beat responses received.
+            "
+        ::= { wlsxIntercontrollerHbtEntry 5 }
+
+    haLastMissedHbtCnt OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of heart beat last missed.
+            "
+        ::= { wlsxIntercontrollerHbtEntry 6 }
+
+    haLastHbtMissedTime OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The timestamp of last missed hbt.
+            "
+        ::= { wlsxIntercontrollerHbtEntry 7 }
+
+
+-- State sync table --
+
+   wlsxStateSyncTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxStateSyncEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+        "
+            This Table lists the counts of active/replicated pmk-cache and
+            key-cache entries related to HA state sync.
+        "
+	
+      ::= { wlsxHighAvalabilityInfoGroup 4 } 
+
+   wlsxStateSyncEntry OBJECT-TYPE 
+	  SYNTAX       WlsxStateSyncEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             " HA state sync entry " 
+	  INDEX { haProfileName }
+      ::= { wlsxStateSyncTable 1 } 
+
+   WlsxStateSyncEntry ::=
+     SEQUENCE {
+
+		haActivePmkCacheEntries  		Gauge,
+		haReplicatedPmkCacheEntries  	Gauge,
+		haTotalPmkCacheEntries  		Gauge,
+		haActiveKeyCacheEntries 	 	Gauge,
+		haReplicatedKeyCacheEntries 	Gauge,
+		haTotalKeyCacheEntries  		Gauge
+     }
+
+    haActivePmkCacheEntries OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of active pmk cache entries.
+            "
+        ::= { wlsxStateSyncEntry 1 }
+
+
+    haReplicatedPmkCacheEntries OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of replicated pmk cache entries.
+            "
+        ::= { wlsxStateSyncEntry 2 }
+
+    haTotalPmkCacheEntries OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of pmk cache entries.
+            "
+        ::= { wlsxStateSyncEntry 3 }
+
+    haActiveKeyCacheEntries OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of active key cache entries.
+            "
+        ::= { wlsxStateSyncEntry 4 }
+
+    haReplicatedKeyCacheEntries OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The nuber of replicated key cache entries.
+            "
+        ::= { wlsxStateSyncEntry 5 }
+
+    haTotalKeyCacheEntries OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of key cache entries.
+            "
+        ::= { wlsxStateSyncEntry 6 }
+
+
+-- HA tunnel table --
+
+   wlsxHighAvalabilityTunnelTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxHighAvalabilityTunnelEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+        "
+            This table lists the total number of High Availability acitve/standby tunnels
+            and AP heart beat tunnels on the Aruba controller.
+        "
+	
+      ::= { wlsxHighAvalabilityInfoGroup 5 } 
+
+   wlsxHighAvalabilityTunnelEntry OBJECT-TYPE 
+	  SYNTAX       WlsxHighAvalabilityTunnelEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             " HA tunnel entry " 
+	  INDEX { haProfileName }
+      ::= { wlsxHighAvalabilityTunnelTable 1 } 
+
+   WlsxHighAvalabilityTunnelEntry ::=
+     SEQUENCE {
+
+		haActiveVapTunnels				Gauge,
+		haStandbyVapTunnels  			Gauge,
+		haTotalVapTunnels      			Gauge,
+		haAPHbtTunnels	 				Gauge
+     }
+
+    haActiveVapTunnels OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of active per VAP GRE tunnels.
+            "
+        ::= { wlsxHighAvalabilityTunnelEntry 1 }
+
+    haStandbyVapTunnels OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of standby per VAP GRE tunnels.
+            "
+        ::= { wlsxHighAvalabilityTunnelEntry 2 }
+
+    haTotalVapTunnels OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of per VAP GRE tunnels.
+            "
+        ::= { wlsxHighAvalabilityTunnelEntry 3 }
+
+    haAPHbtTunnels OBJECT-TYPE
+         SYNTAX       Gauge
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of AP hbt GRE tunnels.
+            "
+        ::= { wlsxHighAvalabilityTunnelEntry 4 }
+
+-- High Availability Traps
+-- This group defines all the traps related to High Availability. 
+wlsxHaTrapObjectsGroup      OBJECT IDENTIFIER ::= { wlsxHighAvalabilityTraps 1 }
+wlsxHaTrapDefinitionGroup   OBJECT IDENTIFIER ::= { wlsxHighAvalabilityTraps 2 }
+
+    wlsxHaV4Status OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This object is used in the traps to indicate the
+             IPv4 status of High Availability.
+            "
+        ::= { wlsxHaTrapObjectsGroup 1 }
+    wlsxHaV4Role OBJECT-TYPE
+         SYNTAX       ArubaHaRole
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object is used in the traps to indicate the
+            IPv4 HA role of the controller.
+            "
+        ::= { wlsxHaTrapObjectsGroup 2 }
+
+    wlsxHaV6Status OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object is used in the traps to indicate the
+            IPv6 status of High Availability.
+            "
+        ::= { wlsxHaTrapObjectsGroup 3 }
+
+    wlsxHaV6Role OBJECT-TYPE
+         SYNTAX       ArubaHaRole
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object is used in the traps to indicate the
+            IPv6 HA role of the controller.
+            "
+        ::=  { wlsxHaTrapObjectsGroup 4 }
+
+    wlsxHaAPName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..63))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object is used in the traps to indicate name of an AP.
+            "
+        ::= { wlsxHaTrapObjectsGroup 5 }
+
+
+    wlsxHaActiveControllerIp OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..63))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object is used in the traps to indicate the active controller IP address.
+            "
+        ::= { wlsxHaTrapObjectsGroup 6 }
+
+    wlsxHaStandbyControllerIp OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..63))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object is used in the traps to indicate the standby controller IP address.
+            "
+        ::= { wlsxHaTrapObjectsGroup 7 }
+
+     wlsxTrapHaConnectivityStatus OBJECT-TYPE
+         SYNTAX       ArubaHaConnectivityStatus
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object is used in the traps to indicate standby controller connectivity status
+            of an AP.
+            "
+        ::=  { wlsxHaTrapObjectsGroup 8 }
+
+     wlsxTrapHaIntercontrollerHbtMissCnt OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object is used in the traps to indicate the number of intercontroller heart beat miss. 
+            "
+        ::=  { wlsxHaTrapObjectsGroup 9 }
+
+     wlsxTrapHaHbtMissTimeStamp OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..63))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object is used in the traps to indicate the time stamp of 
+            intercontroller heart beat miss. 
+            "
+        ::=  { wlsxHaTrapObjectsGroup 10 }
+
+      wlsxTrapHaStandbyApCnt OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object is used in the traps to indicate the number of standby APs on standby controller.
+            "
+        ::=  { wlsxHaTrapObjectsGroup 11 }
+
+
+--Trap Definition
+         wlsxHaState  NOTIFICATION-TYPE
+         OBJECTS {wlsxHaV4Status, wlsxHaV4Role, wlsxHaV6Status, wlsxHaV6Role}
+         STATUS  current
+         DESCRIPTION
+            "This trap indicates that HA state has changed."
+         ::= { wlsxHaTrapDefinitionGroup 1 }
+
+         wlsxHaStandbyIpSentFailed  NOTIFICATION-TYPE
+         OBJECTS {wlsxHaStandbyControllerIp, wlsxHaAPName}
+         STATUS  current
+         DESCRIPTION
+            "This trap indicates that standby IP is sent to an AP failed"
+         ::= { wlsxHaTrapDefinitionGroup 2 }
+
+         wlsxHaStandbyConnectivityState  NOTIFICATION-TYPE
+         OBJECTS {wlsxHaAPName, wlsxHaStandbyControllerIp, wlsxTrapHaConnectivityStatus}
+         STATUS  current
+         DESCRIPTION
+            "This trap indicates the standby connectivity status for an AP."
+         ::= { wlsxHaTrapDefinitionGroup 3 }
+
+         wlsxHaIntercontrollerHbtMiss  NOTIFICATION-TYPE
+         OBJECTS {wlsxTrapHaIntercontrollerHbtMissCnt, wlsxHaActiveControllerIp, wlsxTrapHaHbtMissTimeStamp}
+         STATUS  current
+         DESCRIPTION
+            "This trap indicates around half of the threshold intercontroller hearbeat 
+             missed with serving controller.
+            "
+         ::= { wlsxHaTrapDefinitionGroup 4 }
+
+         wlsxHaFailoverTrigger  NOTIFICATION-TYPE
+         OBJECTS {wlsxHaActiveControllerIp, wlsxTrapHaStandbyApCnt}
+         STATUS  current
+         DESCRIPTION
+            "This trap indicates that standby controller has triggered HA failover to aps belonging to a
+            particular serving controller with which intercontroller heart beat missed above threshold."
+
+         ::= { wlsxHaTrapDefinitionGroup 5 }
+
+          wlsxHaFailoverRequestFromAp NOTIFICATION-TYPE
+         OBJECTS {wlsxHaAPName}
+         STATUS  current
+         DESCRIPTION
+            "This trap indicates that an ap sent failover request to the controller.
+             This could be because of AP missing hbt with serving controller, on receiving failover 
+             request from standby controller or AP trying to preempt back to active controller"
+         ::= { wlsxHaTrapDefinitionGroup 6 }
+END
diff --git a/MIBS/arubaos/WLSX-IFEXT-MIB b/MIBS/arubaos/WLSX-IFEXT-MIB
new file mode 100644
index 0000000..17ed197
--- /dev/null
+++ b/MIBS/arubaos/WLSX-IFEXT-MIB
@@ -0,0 +1,1065 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+
+WLSX-IFEXT-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+	ifIndex
+		  FROM RFC1213-MIB
+
+		 ArubaPoeState,
+		 ArubaDot1dState,
+		 ArubaPortMode,
+		 ArubaVlanValidRange,
+	     ArubaEnableValue,
+	     ArubaOperStateValue,
+		 ArubaPortType,
+		 ArubaPortDuplex,
+		 ArubaPortSpeed,
+		 ArubaIfType
+	   		FROM ARUBA-TC
+
+	wlsxEnterpriseMibModules
+           FROM ARUBA-MIB;
+
+	wlsxIfExtMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            System level information about the Aruba controller."
+
+       REVISION         "202008141745Z"
+       DESCRIPTION
+            "Deprecated wlsxIfExtPortTable and added new table
+             wlsxIfExtNPortTable"
+
+       REVISION        "1001261806Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 3 }
+
+   wlsxIfExtGroup       OBJECT IDENTIFIER ::= { wlsxIfExtMIB 1 }
+
+-- Port Table defines all the physical ports in the controller.
+
+   wlsxIfExtPortTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxIfExtPortEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       deprecated
+      DESCRIPTION 
+	  	"
+			The table of processors contained by the controller. This table is
+            deprecated in favor of wlsxIfExtNPortTable.
+		"
+      ::= { wlsxIfExtGroup 1 } 
+
+   wlsxIfExtPortEntry OBJECT-TYPE 
+	  SYNTAX       WlsxIfExtPortEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       deprecated
+      DESCRIPTION 
+	  "
+	  	An entry for one processor contained by the controller.
+	  "
+	  INDEX {ifExtSlotNumber, ifExtPortNumber}
+      ::= { wlsxIfExtPortTable 1 } 
+
+   WlsxIfExtPortEntry ::=
+     SEQUENCE {
+		 ifExtSlotNumber			Integer32,
+		 ifExtPortNumber			Integer32,
+		 ifExtPortIfIndex			Integer32,
+		 ifExtAdminState			ArubaEnableValue,
+		 ifExtOperState				INTEGER,
+		 ifExtPoeState				ArubaPoeState,
+		 ifExtIsTrusted				TruthValue,
+		 ifExtDot1DState			ArubaDot1dState,
+		 ifExtMode					ArubaPortMode,
+		 ifExtAccessVlanId			ArubaVlanValidRange,
+		 ifExtTrunkNativeVlanId		ArubaVlanValidRange,
+		 ifExtTrunkIsAllowedAll		TruthValue,
+		 ifExtTrunkAllowedVlanList	OCTET STRING,
+		 ifExtIngressACLName		DisplayString,
+		 ifExtEgressACLName			DisplayString,
+		 ifExtSessionACLName		DisplayString,
+		 ifExtXsecVlan				ArubaVlanValidRange,
+		 ifExtIsMonitoring			TruthValue,
+		 ifExtIsMux					TruthValue,
+		 ifExtUserSlotNumber		Integer32,
+		 ifExtUserPortNumber		Integer32,
+		 ifExtPortSpeed				ArubaPortSpeed,
+		 ifExtPortDuplex			ArubaPortDuplex,
+		 ifExtPortType				ArubaPortType,
+		 ifExtDescr					DisplayString,
+		 ifExtUserModuleNumber		Integer32
+	 }
+
+   ifExtSlotNumber OBJECT-TYPE
+         SYNTAX       Integer32
+	  	 MAX-ACCESS   not-accessible		
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			This object represents the Physical Slot of the Interface.
+            "
+        ::= { wlsxIfExtPortEntry 1 }
+
+   ifExtPortNumber OBJECT-TYPE
+        SYNTAX      Integer32
+	  	MAX-ACCESS   not-accessible		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			This object represents the Physical Port of the Interface. 
+            "
+        ::= { wlsxIfExtPortEntry 2 }
+
+   ifExtPortIfIndex OBJECT-TYPE
+        SYNTAX      Integer32
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			This is the ifIndex in ifTable, representing this slot and port. 
+            This object is deprecated in favour of ifExtNPortIfIndex.
+            "
+        ::= { wlsxIfExtPortEntry 3 }
+
+   ifExtAdminState OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			The desired state of the interface. This object is deprecated in
+            favour of ifExtNAdminState.
+			"
+        ::= { wlsxIfExtPortEntry 4 }
+ 
+   ifExtOperState OBJECT-TYPE
+        SYNTAX       INTEGER{
+						up(1),
+						down(2),
+						testing(3)
+					 }
+        MAX-ACCESS   read-only
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			The current operational state of the interface. This object is
+            deprecated in favour of ifExtNOperState.
+			"
+        ::= { wlsxIfExtPortEntry 5 }
+        
+   ifExtPoeState OBJECT-TYPE
+        SYNTAX       ArubaPoeState
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			The current state of the power over ethernet capability of the
+			port. This object is deprecated in favour of ifExtNPoeState.
+			"
+        ::= { wlsxIfExtPortEntry 6 }
+   ifExtIsTrusted OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			The object indicates if the port is used in the trusted side of the
+			network or the untrusted side. This object is deprecated in favour
+            of ifExtNIsTrusted.
+			"
+        ::= { wlsxIfExtPortEntry 7 }
+
+   ifExtDot1DState OBJECT-TYPE
+        SYNTAX       ArubaDot1dState
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			Current Dot1d state of the Port. 
+            This object provides default switch port value if ifExtIsMonitoring
+            is true(1).
+            This object is deprecated in favour of ifExtNDot1DState.
+			"
+        ::= { wlsxIfExtPortEntry 8 }
+
+   ifExtMode OBJECT-TYPE
+        SYNTAX       ArubaPortMode
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object indicates if the port is in a Trunk mode or access mode.
+            This object provides default switch port value if ifExtIsMonitoring
+            is true(1).
+            This object is deprecated in favour of ifExtNMode.
+			"
+        ::= { wlsxIfExtPortEntry 9 }
+
+   ifExtAccessVlanId OBJECT-TYPE
+        SYNTAX       ArubaVlanValidRange
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			The VLAN Id when the port is in Access Mode. This object provides
+            default switch port value if ifExtIsMonitoring is true(1). This object is
+            deprecated in favour of ifExtNAccessVlanId.
+			"
+        ::= { wlsxIfExtPortEntry 10 }
+
+   ifExtTrunkNativeVlanId OBJECT-TYPE
+        SYNTAX       ArubaVlanValidRange
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			The native VLAN Id of the Port, when the port is in dot1q mode. This
+            object provides default switch port value if ifExtIsMonitoring is
+            true(1). 
+            This object is deprecated in favour of ifExtNTrunkNativeVlanId.
+			"
+        ::= { wlsxIfExtPortEntry 11 }
+
+   ifExtTrunkIsAllowedAll OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			When the mode of the port is Trunk, this Object indicates 
+			if the port is part of all the configured Vlans. This object
+            provides default switch port value if ifExtIsMonitoring is true(1).
+            This object is deprecated in favour of ifExtNTrunkIsAllowedAll.
+			"
+        ::= { wlsxIfExtPortEntry 12 }
+
+   ifExtTrunkAllowedVlanList OBJECT-TYPE
+        SYNTAX       OCTET STRING(SIZE(0..512))
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			    A string of octets containing one bit per VLAN for a
+			    total of 4096 VLANs in the management domain.  
+				The most significant bit of the octet string is the 
+				lowest value VLAN of 4096 VLANs.
+				By setting the bit(1) we indicate that the vlan is part of the
+				interface. 
+				The most significant bit of the bitmap is transmitted 
+				first. Note that if the length of this string is less than
+				512 octets, any 'missing' octets are assumed to contain
+				the value zero. 
+                This object provides default switch port value if
+                ifExtIsMonitoring is true(1).
+                This object is deprecated in favour of
+                ifExtNTrunkAllowedVlanList.
+			"
+        ::= { wlsxIfExtPortEntry 13 }
+
+   ifExtIngressACLName OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object represents the Ingress ACL name applied to the port.
+			An Empty string indicates that there is not ACL applied on this 
+			port. This object is deprecated in favour of ifExtNIngressACLName.
+			"
+        ::= { wlsxIfExtPortEntry 14 }
+
+   ifExtEgressACLName OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object represents the Egress ACL name applied to the port.
+			An Empty string indicates that there is not ACL applied on this 
+			port. This object is deprecated in favour of ifExtNEgressACLName.
+			"
+        ::= { wlsxIfExtPortEntry 15 }
+
+   ifExtSessionACLName OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object represents the Session ACL name applied to the port.
+			An Empty string indicates that there is not ACL applied on this 
+			port. This object is deprecated in favour of ifExtNEgressACLName.
+			"
+        ::= { wlsxIfExtPortEntry 16 }
+
+   ifExtXsecVlan OBJECT-TYPE
+        SYNTAX       ArubaVlanValidRange
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object indicates if the port is an Xsec Port. This object is
+            deprecated in favour of ifExtNXsecVlan.
+			"
+        ::= { wlsxIfExtPortEntry 17 }
+
+   ifExtIsMonitoring OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object indicates if the port is used for Port monitoring.
+            When the value of this object is true(1), then below objects provide
+            default switch port values configured on this port.
+            ifExtMode,
+            ifExtAccessVlanId,
+            ifExtTrunkNativeVlanId,
+            ifExtTrunkIsAllowedAll,
+            ifExtTrunkAllowedVlanList
+            This object is deprecated in favour of ifExtNIsMonitoring.
+			"
+        ::= { wlsxIfExtPortEntry 18 }
+
+   ifExtIsMux OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This object indicates if the port is used as a MUX Port. This object
+            is deprecated in favour of ifExtNIsMux.
+			"
+        ::= { wlsxIfExtPortEntry 19 }
+
+   ifExtUserSlotNumber OBJECT-TYPE
+        SYNTAX      Integer32
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			The user-visible (zero-based) slot number.
+            "
+        ::= { wlsxIfExtPortEntry 20 }
+
+   ifExtUserPortNumber OBJECT-TYPE
+        SYNTAX      Integer32
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			The user-visible (zero-based) port number.
+            "
+        ::= { wlsxIfExtPortEntry 21 }
+
+   ifExtPortSpeed OBJECT-TYPE
+        SYNTAX      ArubaPortSpeed
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			Speed of the Port. This object is deprecated in favour of
+            ifExtNPortSpeed.
+            "
+        ::= { wlsxIfExtPortEntry 22 }
+
+   ifExtPortDuplex OBJECT-TYPE
+        SYNTAX      ArubaPortDuplex
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			Duplexity of the Port. This object is deprecated in favour of
+            ifExtNPortDuplex.
+			"
+        ::= { wlsxIfExtPortEntry 23 }
+
+   ifExtPortType OBJECT-TYPE
+        SYNTAX      ArubaPortType
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			Type of the Port. This object is deprecated in favour of
+            ifExtNPortType.
+            "
+        ::= { wlsxIfExtPortEntry 24 }
+
+   ifExtDescr OBJECT-TYPE
+        SYNTAX      DisplayString
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			Port Description. This object is deprecated in favour of
+            ifExtNDescr.
+            "
+        ::= { wlsxIfExtPortEntry 25 }
+
+   ifExtUserModuleNumber OBJECT-TYPE
+        SYNTAX      Integer32
+	  	MAX-ACCESS   read-only		
+        STATUS       deprecated
+        DESCRIPTION
+            "
+			The user-visible (zero-based) module number.
+            "
+        ::= { wlsxIfExtPortEntry 26 }
+
+
+-- VLAN Table defines all the VLAN in the controller.
+
+   wlsxIfExtVlanTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxIfExtVlanEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		"
+      ::= { wlsxIfExtGroup 2 } 
+
+   wlsxIfExtVlanEntry OBJECT-TYPE 
+	  SYNTAX       WlsxIfExtVlanEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  "
+	  	An entry for one processor contained by the controller.
+	  "
+	  INDEX {ifExtVlanId}
+      ::= { wlsxIfExtVlanTable 1 } 
+
+   WlsxIfExtVlanEntry ::=
+     SEQUENCE {
+		 ifExtVlanId			ArubaVlanValidRange,
+		 ifExtVlanName			DisplayString,
+		 ifExtVlanStatus		RowStatus
+	 }
+
+   ifExtVlanId OBJECT-TYPE
+         SYNTAX       ArubaVlanValidRange
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			This object represents the VLAN Id of the Interface.
+            "
+        ::= { wlsxIfExtVlanEntry 1 }
+
+   ifExtVlanName OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+	  	MAX-ACCESS   read-create		
+        STATUS       current
+        DESCRIPTION
+            "
+			Name of the VLAN. 
+            "
+        ::= { wlsxIfExtVlanEntry 2 }
+
+   ifExtVlanStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+		 	A Row status Object used to create/modify the row.
+		 "
+        ::= { wlsxIfExtVlanEntry 3 }
+
+-- VLAN Port Member Table defines port membership in the vlan.
+
+   wlsxIfExtVlanMemberTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxIfExtVlanMemberEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		"
+      ::= { wlsxIfExtGroup 3 } 
+
+   wlsxIfExtVlanMemberEntry OBJECT-TYPE 
+	  SYNTAX       WlsxIfExtVlanMemberEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  "
+	  	An entry for one processor contained by the controller.
+	  "
+	  INDEX {ifExtVlanId, ifIndex}
+      ::= { wlsxIfExtVlanMemberTable 1 } 
+
+   WlsxIfExtVlanMemberEntry ::=
+     SEQUENCE {
+		 ifExtVlanMemberStatus		RowStatus,
+		 ifExtVlanMemberSlot		Integer32,
+		 ifExtVlanMemberPort        Integer32,
+		 ifExtVlanMemberType        ArubaIfType
+	 }
+
+   ifExtVlanMemberStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+		 	A Row status Object used to create/modify and indicate the 
+			status row.
+		 "
+        ::= { wlsxIfExtVlanMemberEntry 1 }
+
+   ifExtVlanMemberSlot OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+         "
+		 	The slot index of the slot referred to by this row (1-based).
+		 "
+        ::= { wlsxIfExtVlanMemberEntry 2 }
+
+   ifExtVlanMemberPort OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+         "
+		 	The slot index of the slot referred to by this row (1-based).
+		 "
+        ::= { wlsxIfExtVlanMemberEntry 3 }
+
+   ifExtVlanMemberType OBJECT-TYPE
+        SYNTAX      ArubaIfType
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+         "
+		 	The VLAN member type.
+		 "
+        ::= { wlsxIfExtVlanMemberEntry 4 }
+
+-- VLAN Interface Table defines Layer3 VLAN Interfaces.
+
+   wlsxIfExtVlanInterfaceTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxIfExtVlanInterfaceEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		"
+      ::= { wlsxIfExtGroup 4 } 
+
+   wlsxIfExtVlanInterfaceEntry OBJECT-TYPE 
+	  SYNTAX       WlsxIfExtVlanInterfaceEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  "
+	  	An entry for one processor contained by the controller.
+	  "
+	  INDEX {ifExtVlanId}
+      ::= { wlsxIfExtVlanInterfaceTable 1 } 
+
+   WlsxIfExtVlanInterfaceEntry ::=
+     SEQUENCE {
+		 ifExtVlanInterfaceIfIndex			Integer32,
+		 ifExtVlanInterfaceDescription		DisplayString,
+		 ifExtVlanInterfaceBWContract		DisplayString,
+		 ifExtVlanInterfaceAdminState		ArubaEnableValue,
+		 ifExtVlanInterfaceOperState		ArubaOperStateValue,
+		 ifExtVlanInterfaceIpAddress		IpAddress,
+		 ifExtVlanInterfaceIpMask			IpAddress,
+		 ifExtVlanInterfaceIsLocalArp		ArubaEnableValue,
+		 ifExtVlanInterfaceStatus			RowStatus,
+		 ifExtVlanInterfaceIpRouting		ArubaEnableValue,
+		 ifExtVlanInterfaceIpNatInside		ArubaEnableValue,
+		 ifExtVlanInterfaceIpIgmpSnooping	ArubaEnableValue
+
+	 }
+
+   ifExtVlanInterfaceIfIndex OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This is the ifIndex in ifTable, representing VLAN Interface. 
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 1 }
+
+   ifExtVlanInterfaceDescription OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates the description of the Interface.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 2 }
+
+   ifExtVlanInterfaceBWContract OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates the Bandwidth contract on the interface.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 3 }
+
+   ifExtVlanInterfaceAdminState OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates the administrative state of the Interface.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 4 }
+
+   ifExtVlanInterfaceOperState OBJECT-TYPE
+        SYNTAX      ArubaOperStateValue
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates the operational state of the Interface.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 5 }
+
+   ifExtVlanInterfaceIpAddress OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates the IP Address of the Interface.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 6 }
+
+
+   ifExtVlanInterfaceIpMask OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates the subnet mask of the Interface.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 7 }
+
+   ifExtVlanInterfaceIsLocalArp OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates if the Local Arp is set on the Interface. 
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 8 }
+
+   ifExtVlanInterfaceStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+		 	A Row status Object used to create/modify and indicate the 
+			status row.
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 9}
+
+   ifExtVlanInterfaceIpRouting OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates if the IP routing is set on the Interface. 
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 10 }
+
+   ifExtVlanInterfaceIpNatInside OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates if the IP nat inside is set on the Interface. 
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 11 }
+
+   ifExtVlanInterfaceIpIgmpSnooping OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-create
+        STATUS       current
+        DESCRIPTION
+         "
+			This Object indicates if the IP IGMP snooping is set on the Interface. 
+		 "
+        ::= { wlsxIfExtVlanInterfaceEntry 12 }
+
+   wlsxIfExtNPortTable  OBJECT-TYPE
+      SYNTAX       SEQUENCE OF WlsxIfExtNPortEntry
+      MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+        "
+            The table of interface details.
+        "
+      ::= { wlsxIfExtGroup 5 }
+
+   wlsxIfExtNPortEntry OBJECT-TYPE
+      SYNTAX       WlsxIfExtNPortEntry
+      MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+      "
+        An entry in wlsxIfExtNPortTable.
+      "
+      INDEX { ifExtNSlotNumber, ifExtNModuleNumber, ifExtNPortNumber }
+      ::= { wlsxIfExtNPortTable 1 }
+
+   WlsxIfExtNPortEntry ::=
+     SEQUENCE {
+         ifExtNSlotNumber             Integer32,
+         ifExtNModuleNumber          Integer32,
+         ifExtNPortNumber             Integer32,
+         ifExtNPortIfIndex           Integer32,
+         ifExtNAdminState            ArubaEnableValue,
+         ifExtNOperState             INTEGER,
+         ifExtNPoeState              ArubaPoeState,
+         ifExtNIsTrusted             TruthValue,
+         ifExtNDot1DState            ArubaDot1dState,
+         ifExtNMode                  ArubaPortMode,
+         ifExtNAccessVlanId          ArubaVlanValidRange,
+         ifExtNTrunkNativeVlanId     ArubaVlanValidRange,
+         ifExtNTrunkIsAllowedAll     TruthValue,
+         ifExtNTrunkAllowedVlanList  OCTET STRING,
+         ifExtNIngressACLName        DisplayString,
+         ifExtNEgressACLName         DisplayString,
+         ifExtNSessionACLName        DisplayString,
+         ifExtNXsecVlan              ArubaVlanValidRange,
+         ifExtNIsMonitoring          TruthValue,
+         ifExtNIsMux                 TruthValue,
+         ifExtNPortSpeed             ArubaPortSpeed,
+         ifExtNPortDuplex            ArubaPortDuplex,
+         ifExtNPortType              ArubaPortType,
+         ifExtNDescr                 DisplayString
+     }
+
+   ifExtNSlotNumber  OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "
+            This object represents the user-visible (zero-based) Physical Slot of the Interface.
+            "
+        ::= { wlsxIfExtNPortEntry 1 }
+
+   ifExtNModuleNumber   OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  not-accessible
+        STATUS       current
+        DESCRIPTION
+            "
+            This object represents the user-visible (zero-based) Physical Module of the Interface.
+            "
+        ::= { wlsxIfExtNPortEntry 2 }
+
+   ifExtNPortNumber OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  not-accessible
+        STATUS       current
+        DESCRIPTION
+            "
+            This object represents the user-visible (zero-based) Physical Port of the Interface.
+            "
+        ::= { wlsxIfExtNPortEntry 3 }
+
+   ifExtNPortIfIndex OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            This is the ifIndex in ifTable, representing this slot, module and port.
+            "
+        ::= { wlsxIfExtNPortEntry 4 }
+
+   ifExtNAdminState OBJECT-TYPE
+        SYNTAX       ArubaEnableValue
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            The desired state of the interface.
+            "
+        ::= { wlsxIfExtNPortEntry 5 }
+
+   ifExtNOperState OBJECT-TYPE
+        SYNTAX       INTEGER{
+                        up(1),
+                        down(2),
+                        testing(3)
+                     }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            The current operational state of the interface.
+            "
+        ::= { wlsxIfExtNPortEntry 6 }
+
+   ifExtNPoeState OBJECT-TYPE
+        SYNTAX       ArubaPoeState
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            The current state of the power over ethernet capability of the
+            port.
+            "
+        ::= { wlsxIfExtNPortEntry 7 }
+
+   ifExtNIsTrusted OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            The object indicates if the port is used in the trusted side of the
+            network or the untrusted side.
+            "
+        ::= { wlsxIfExtNPortEntry 8 }
+
+   ifExtNDot1DState OBJECT-TYPE
+        SYNTAX       ArubaDot1dState
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            Current Dot1d state of the Port.
+            "
+        ::= { wlsxIfExtNPortEntry 9 }
+
+   ifExtNMode OBJECT-TYPE
+        SYNTAX       ArubaPortMode
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object indicates if the port is in a Trunk mode or access mode.
+            This object provides default switch port value if ifExtIsMonitoring
+            is true(1).
+            "
+        ::= { wlsxIfExtNPortEntry 10 }
+
+   ifExtNAccessVlanId OBJECT-TYPE
+        SYNTAX       ArubaVlanValidRange
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            The VLAN Id when the port is in Access Mode. This object provides 
+            default switch port value if ifExtIsMonitoring is true(1).
+            "
+        ::= { wlsxIfExtNPortEntry 11 }
+
+   ifExtNTrunkNativeVlanId OBJECT-TYPE
+        SYNTAX       ArubaVlanValidRange
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            The native VLAN Id of the Port, when the port is in dot1q mode.
+            This object provides default switch port value if ifExtIsMonitoring
+            is true(1).
+            "
+        ::= { wlsxIfExtNPortEntry 12 }
+
+   ifExtNTrunkIsAllowedAll OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            When the mode of the port is Trunk, this Object indicates
+            if the port is part of all the configured Vlans.
+            This object provides default switch port value if ifExtIsMonitoring
+            is true(1).
+            "
+        ::= { wlsxIfExtNPortEntry 13 }
+
+   ifExtNTrunkAllowedVlanList OBJECT-TYPE
+        SYNTAX       OCTET STRING(SIZE(0..512))
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+                A string of octets containing one bit per VLAN for a
+                total of 4096 VLANs in the management domain.
+                The most significant bit of the octet string is the
+                lowest value VLAN of 4096 VLANs.
+                By setting the bit(1) we indicate that the vlan is part of the
+                interface.
+                The most significant bit of the bitmap is transmitted
+                first. Note that if the length of this string is less than
+                512 octets, any 'missing' octets are assumed to contain
+                the value zero.
+                This object provides default switch port value if
+                ifExtIsMonitoring is true(1).
+            "
+        ::= { wlsxIfExtNPortEntry 14 }
+
+   ifExtNIngressACLName OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object represents the Ingress ACL name applied to the port.
+            An Empty string indicates that there is not ACL applied on this
+            port.
+            "
+        ::= { wlsxIfExtNPortEntry 15 }
+
+   ifExtNEgressACLName OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object represents the Egress ACL name applied to the port.
+            An Empty string indicates that there is not ACL applied on this
+            port.
+            "
+        ::= { wlsxIfExtNPortEntry 16 }
+
+   ifExtNSessionACLName OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object represents the Session ACL name applied to the port.
+            An Empty string indicates that there is not ACL applied on this
+            port.
+            "
+        ::= { wlsxIfExtNPortEntry 17 }
+
+   ifExtNXsecVlan OBJECT-TYPE
+        SYNTAX       ArubaVlanValidRange
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object indicates if the port is an Xsec Port.
+            "
+        ::= { wlsxIfExtNPortEntry 18 }
+
+   ifExtNIsMonitoring OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object indicates if the port is used for Port monitoring.
+            When the value of this object is true(1), then below objects provide
+            default switch port values configured on this port.
+            ifExtNMode,
+            ifExtNAccessVlanId,
+            ifExtNTrunkNativeVlanId,
+            ifExtNTrunkIsAllowedAll,
+            ifExtNTrunkAllowedVlanList
+            "
+        ::= { wlsxIfExtNPortEntry 19 }
+
+   ifExtNIsMux OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+            "
+            This object indicates if the port is used as a MUX Port.
+            "
+        ::= { wlsxIfExtNPortEntry 20 }
+
+   ifExtNPortSpeed OBJECT-TYPE
+        SYNTAX      ArubaPortSpeed
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            Speed of the Port.
+            "
+        ::= { wlsxIfExtNPortEntry 21 }
+
+   ifExtNPortDuplex OBJECT-TYPE
+        SYNTAX      ArubaPortDuplex
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            Duplexity of the Port.
+            "
+        ::= { wlsxIfExtNPortEntry 22 }
+
+   ifExtNPortType OBJECT-TYPE
+        SYNTAX      ArubaPortType
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            Type of the Port.
+            "
+        ::= { wlsxIfExtNPortEntry 23 }
+
+   ifExtNDescr OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            Port Description.
+            "
+        ::= { wlsxIfExtNPortEntry 24 }
+
+END
+
diff --git a/MIBS/arubaos/WLSX-MESH-MIB b/MIBS/arubaos/WLSX-MESH-MIB
new file mode 100644
index 0000000..50cc832
--- /dev/null
+++ b/MIBS/arubaos/WLSX-MESH-MIB
@@ -0,0 +1,283 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-MESH-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+              
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+       DateAndTime,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+           
+       ArubaMeshRole,
+	   ArubaEncryptionMethods,
+	   ArubaPhyType
+	   		FROM ARUBA-TC
+	   wlanAPMacAddress
+           FROM WLSX-WLAN-MIB
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxMeshMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provides
+            information about Mesh portal and topology 
+		in the Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 13 }
+
+   wlsxMeshInfoGroup			OBJECT IDENTIFIER ::= { wlsxMeshMIB 1 }
+   
+   wlsxMeshNodeGroup           OBJECT IDENTIFIER ::= { wlsxMeshInfoGroup 1 }
+
+   wlsxMeshNodeTotal     OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of mesh nodes in the controller.
+            "
+        ::= { wlsxMeshNodeGroup 1 }
+
+   wlsxMeshNodeTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MeshEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table lists Mesh Node Info. 
+		"
+      ::= { wlsxMeshNodeGroup 2 } 
+      
+   wlsxMeshNodeEntry OBJECT-TYPE
+	  SYNTAX       MeshEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             ""
+	  INDEX {wlanAPMacAddress}
+      ::= { wlsxMeshNodeTable 1 } 
+      
+   MeshEntry ::=
+     SEQUENCE {
+		wlsxMeshRole                    ArubaMeshRole,
+		wlsxMeshNodeParent              MacAddress,
+		wlsxMeshNodeChildrenCount       Unsigned32,
+		wlsxMeshNodeCluster             DisplayString,
+		wlsxMeshNodeRfBand              ArubaPhyType,
+		wlsxMeshNodePathCost            Integer32,
+		wlsxMeshNodeNodeCost            Integer32,
+		wlsxMeshNodeLinkCost            Integer32,
+		wlsxMeshNodeHopCount            Integer32,
+                wlsxMeshSNR                     Unsigned32,
+                wlsxMeshTxRate                  Unsigned32,
+                wlsxMeshRxRate                  Unsigned32,
+                wlsxMeshUplinkAge               TimeTicks,
+                wlsxMeshNumRecoveryChildren     Unsigned32,
+                wlsxMeshTopologyUpdateAge       TimeTicks,
+                wlsxMeshIsRecovery              TruthValue,
+                wlsxMeshIs11n                   TruthValue
+    } 
+	wlsxMeshRole OBJECT-TYPE
+         SYNTAX       ArubaMeshRole
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh role
+            "
+        ::= { wlsxMeshNodeEntry 1 }
+        
+ 	wlsxMeshNodeParent OBJECT-TYPE
+         SYNTAX       MacAddress
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Wired MAC address of mesh node's parent
+            "
+        ::= { wlsxMeshNodeEntry 2 }
+
+	wlsxMeshNodeChildrenCount OBJECT-TYPE
+         SYNTAX       Unsigned32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh node children count
+            "
+        ::= { wlsxMeshNodeEntry 3 }
+
+    wlsxMeshNodeCluster OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh cluster name.
+            "
+        ::= { wlsxMeshNodeEntry 4 }
+
+	wlsxMeshNodeRfBand OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh node rf band
+            "
+        ::= { wlsxMeshNodeEntry 5 }
+
+	wlsxMeshNodePathCost OBJECT-TYPE
+         SYNTAX       Integer32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh topology path cost
+            "
+        ::= { wlsxMeshNodeEntry 6 }
+ 
+	wlsxMeshNodeNodeCost OBJECT-TYPE
+         SYNTAX       Integer32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh topology node cost
+            "
+        ::= { wlsxMeshNodeEntry 7 }
+
+ 	wlsxMeshNodeLinkCost OBJECT-TYPE
+         SYNTAX       Integer32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh topology link cost
+            "
+        ::= { wlsxMeshNodeEntry 8 }
+
+  	wlsxMeshNodeHopCount OBJECT-TYPE
+         SYNTAX       Integer32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Mesh topology hop count.
+            "
+        ::= { wlsxMeshNodeEntry 9 }
+
+  	wlsxMeshSNR OBJECT-TYPE
+         SYNTAX       Unsigned32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Signal-to-noise ratio mesh point sees its parent at. 
+            "
+        ::= { wlsxMeshNodeEntry 10 }
+
+  	wlsxMeshTxRate OBJECT-TYPE
+         SYNTAX       Unsigned32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Transmit rate for mesh-uplink [mbps].
+            "
+        ::= { wlsxMeshNodeEntry 11 }
+
+  	wlsxMeshRxRate OBJECT-TYPE
+         SYNTAX       Unsigned32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Receive rate for mesh-uplink [mbps].
+            "
+        ::= { wlsxMeshNodeEntry 12 }
+
+  	wlsxMeshUplinkAge OBJECT-TYPE
+         SYNTAX       TimeTicks
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Time elapsed since the mesh-uplink was formed.
+            "
+        ::= { wlsxMeshNodeEntry 13 }
+
+  	wlsxMeshNumRecoveryChildren OBJECT-TYPE
+         SYNTAX       Unsigned32
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of children in recovery this mesh node has.
+            "
+        ::= { wlsxMeshNodeEntry 14 }
+
+  	wlsxMeshTopologyUpdateAge OBJECT-TYPE
+         SYNTAX       TimeTicks
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			Time elapsed since the last mesh topology update was received from this node.
+            "
+        ::= { wlsxMeshNodeEntry 15 }
+
+  	wlsxMeshIsRecovery OBJECT-TYPE
+         SYNTAX       TruthValue
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			True if this mesh point is in recovery.
+            "
+        ::= { wlsxMeshNodeEntry 16 }
+
+  	wlsxMeshIs11n OBJECT-TYPE
+         SYNTAX       TruthValue
+  		 MAX-ACCESS   read-only		
+         STATUS       current
+         DESCRIPTION
+            "
+			True if this mesh node is 11n-enabled.
+            "
+        ::= { wlsxMeshNodeEntry 17 }
+
+END        
diff --git a/MIBS/arubaos/WLSX-MOBILITY-MIB b/MIBS/arubaos/WLSX-MOBILITY-MIB
new file mode 100644
index 0000000..fde03b5
--- /dev/null
+++ b/MIBS/arubaos/WLSX-MOBILITY-MIB
@@ -0,0 +1,771 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-MOBILITY-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+              
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+	   ArubaEnableValue,
+	   ArubaFrameType,
+	   ArubaActiveState,
+	   ArubaRogueApType,
+	   ArubaAuthenticationMethods,
+	   ArubaEncryptionMethods,
+	   ArubaEncryptionMethods,
+	   ArubaPhyType
+	   		FROM ARUBA-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxMobilityMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the mobility subsystem in the
+			Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 9 }
+
+   wlsxMobilityConfigGroup     	OBJECT IDENTIFIER ::= { wlsxMobilityMIB 1 }
+-- The above group deals with Mobility Domain, HAT, HOST display/config.
+
+   wlsxMobilityProxyStatsGroup     		OBJECT IDENTIFIER ::= { wlsxMobilityMIB 2 }
+-- The above group deals with Proxy State machine statistics.
+
+   wlsxMobilityProxyDHCPStatsGroup 	    	OBJECT IDENTIFIER ::= { wlsxMobilityMIB 3 }
+-- The above group deals with Proxy DHCP State machine statistics.
+
+   wlsxMobilityHAStatsGroup     			OBJECT IDENTIFIER ::= { wlsxMobilityMIB 4 }
+-- The above group deals with MobileIP Home Agent statistics
+
+   wlsxMobilityFAStatsGroup     			OBJECT IDENTIFIER ::= { wlsxMobilityMIB 5 }
+-- The above group deals with MobileIP Foreign Agent statistics
+
+   wlsxMobilityHAFARevocationStatsGroup     			OBJECT IDENTIFIER ::= { wlsxMobilityMIB 6 }
+-- The above group deals with MobileIP HA-FA revocation messages exchange statistics
+
+   wlsxMobilityDomainTable  OBJECT-TYPE 
+         SYNTAX       SEQUENCE OF WlsxMobilityDomainEntry
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			This table lists all mobility domains configured on the controller.
+            "
+        ::= { wlsxMobilityConfigGroup 1 }
+
+	wlsxMobilityDomainEntry OBJECT-TYPE
+		SYNTAX		WlsxMobilityDomainEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"Mobility Domain Entry"
+			INDEX { mobilityDomainName }
+		::= { wlsxMobilityDomainTable 1 }
+
+		WlsxMobilityDomainEntry ::= 
+		SEQUENCE {
+			mobilityDomainName			DisplayString,
+			mobilityDomainIsExclusive	ArubaEnableValue,
+			mobilityDomainStatus		RowStatus
+		}
+
+	mobilityDomainName OBJECT-TYPE
+		SYNTAX		DisplayString
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"The name of the active mobility domain(s) this controller belongs to"
+		::= { wlsxMobilityDomainEntry 1 }
+
+	mobilityDomainIsExclusive OBJECT-TYPE
+		SYNTAX		ArubaEnableValue
+		MAX-ACCESS	read-only
+		STATUS		deprecated
+		DESCRIPTION
+			"Indicates whether this mobility domain is exclusive or not."
+		::= { wlsxMobilityDomainEntry 2 }
+
+	mobilityDomainStatus OBJECT-TYPE
+		SYNTAX		RowStatus
+		MAX-ACCESS	read-create
+		STATUS		current
+		DESCRIPTION
+		    "Row status object used to indicate the status of the row"
+		::= { wlsxMobilityDomainEntry 3 }
+
+   wlsxMobilityHomeAgentTable  OBJECT-TYPE 
+         SYNTAX       SEQUENCE OF WlsxMobilityHomeAgentEntry
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			This table lists all Home Agents visible to the controller.
+            "
+        ::= { wlsxMobilityConfigGroup 3 }
+
+	wlsxMobilityHomeAgentEntry OBJECT-TYPE
+		SYNTAX		WlsxMobilityHomeAgentEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"Mobility Home Agent Entry"
+			INDEX { mobilityHomeAgentSubnet, mobilityHomeAgentMask, mobilityHomeAgentIp }
+		::= { wlsxMobilityHomeAgentTable 1 }
+
+		WlsxMobilityHomeAgentEntry ::= 
+		SEQUENCE {
+			mobilityHomeAgentSubnet			IpAddress,
+			mobilityHomeAgentMask			IpAddress,
+			mobilityHomeAgentIp				IpAddress,
+			mobilityHomeAgentVlan 			Integer32
+		}
+
+	mobilityHomeAgentSubnet OBJECT-TYPE
+		SYNTAX	    IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Subnet of the home agent"
+		::= { wlsxMobilityHomeAgentEntry 1 }
+
+	mobilityHomeAgentMask OBJECT-TYPE
+		SYNTAX	    IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Subnet mask of the home agent"
+		::= { wlsxMobilityHomeAgentEntry 2 }
+
+	mobilityHomeAgentIp OBJECT-TYPE
+		SYNTAX	    IpAddress
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"IP address of the home agent"
+		::= { wlsxMobilityHomeAgentEntry 3 }
+
+	mobilityHomeAgentVlan OBJECT-TYPE
+		SYNTAX	    Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Vlan of the home agent"
+		::= { wlsxMobilityHomeAgentEntry 4 }
+
+   wlsxMobilityHostTable  OBJECT-TYPE 
+         SYNTAX       SEQUENCE OF WlsxMobilityHostEntry
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			This table lists all mobile hosts on the controller.
+            "
+        ::= { wlsxMobilityConfigGroup 4 }
+
+	wlsxMobilityHostEntry OBJECT-TYPE
+		SYNTAX		WlsxMobilityHostEntry
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"Mobility Host Home Agent Entry"
+			INDEX { mobilityHostMac }
+		::= { wlsxMobilityHostTable 1 }
+
+		WlsxMobilityHostEntry ::= 
+		SEQUENCE {
+			mobilityHostMac				MacAddress,
+			mobilityHostIp				IpAddress,
+			mobilityHostStatus			DisplayString,
+			mobilityHostServiceTime		Integer32,
+			mobilityHostHomeVlan		Integer32,
+			mobilityHostHomeNetwork		IpAddress,
+			mobilityHostHomeMask		IpAddress,
+			mobilityHostDhcpInfo 		DisplayString
+		}
+
+	mobilityHostMac OBJECT-TYPE
+		SYNTAX	    MacAddress
+		MAX-ACCESS	not-accessible
+		STATUS		current
+		DESCRIPTION
+			"MAC address of the mobile host"
+		::= { wlsxMobilityHostEntry 1 }
+
+	mobilityHostIp OBJECT-TYPE
+		SYNTAX	    IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"IP address of the mobile host"
+		::= { wlsxMobilityHostEntry 2 }
+
+	mobilityHostStatus OBJECT-TYPE
+		SYNTAX	    DisplayString
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Roaming status of the mobile host"
+		::= { wlsxMobilityHostEntry 3 }
+
+	mobilityHostServiceTime OBJECT-TYPE
+		SYNTAX	    Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Time in seconds mobility service is provided to the mobile host"
+		::= { wlsxMobilityHostEntry 4 }
+
+	mobilityHostHomeVlan OBJECT-TYPE
+		SYNTAX	    Integer32
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Home VLAN of the mobile host"
+		::= { wlsxMobilityHostEntry 5 }
+
+	mobilityHostHomeNetwork OBJECT-TYPE
+		SYNTAX	    IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Home network of the mobile host"
+		::= { wlsxMobilityHostEntry 6 }
+
+
+	mobilityHostHomeMask OBJECT-TYPE
+		SYNTAX	    IpAddress
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"Home network mask of the mobile host"
+		::= { wlsxMobilityHostEntry 7 }
+
+	mobilityHostDhcpInfo OBJECT-TYPE
+		SYNTAX	    DisplayString
+		MAX-ACCESS	read-only
+		STATUS		current
+		DESCRIPTION
+			"DHCP details of the mobile host"
+		::= { wlsxMobilityHostEntry 8 }
+
+-- wlsxMobilityProxyStatsGroup Begins
+
+	mobilityProxyPktRx	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of packet Proxy State machine Received
+            "
+        ::= { wlsxMobilityProxyStatsGroup 1 }
+
+	mobilityProxyPktHandled	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of packet Proxy State machine Processed
+            "
+        ::= { wlsxMobilityProxyStatsGroup 2 }
+
+	mobilityProxyPktFwd	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of packet Proxy State machine Forwarded back to Datapath
+            "
+        ::= { wlsxMobilityProxyStatsGroup 3 }
+
+	mobilityProxyPktDrop	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of packet Proxy State machine Dropped
+            "
+        ::= { wlsxMobilityProxyStatsGroup 4 }
+
+	mobilityProxyBusy	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of mobility events Proxy State machine ignored as it is busy.
+            "
+        ::= { wlsxMobilityProxyStatsGroup 5 }
+
+	mobilityProxyNoMobility	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of mobility clients with <No Mobility Service>
+			
+            "
+        ::= { wlsxMobilityProxyStatsGroup 6 }
+
+	mobilityProxyClientIPChg	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of times mobility detected client IP change
+            "
+        ::= { wlsxMobilityProxyStatsGroup 7 }
+
+	mobilityProxyClientEssidChg	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of times mobility detected client ESSID change
+            "
+        ::= { wlsxMobilityProxyStatsGroup 8 }
+
+-- wlsxMobilityProxyDHCPStatsGroup Begins
+
+	mobilityProxyDhcpBootpRx	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP Bootp messages received
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup 1 }
+
+
+	mobilityProxyDhcpPktProc	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP messages Processed
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup 2 }
+
+
+	mobilityProxyDhcpPktFwd	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP messages forwarded
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup 3 }
+
+
+	mobilityProxyDhcpPktDrop	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP messages Dropped
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  4 }
+
+	mobilityProxyDHCPNak	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP NAK received from the server.
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  5 }
+
+
+	mobilityProxyBadDHCPPkt  OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP packets marked invalid by mobility
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  6 }
+
+
+	mobilityProxyNotDHCP	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Non-DHCP frames received by DHCP state machine
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  7 }
+
+
+	mobilityProxyDHCPNoHomeVlan	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of DHCP requested IP for which home vlan does not exist.
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  8 }
+
+
+	mobilityProxyDHCPUnexpFrame	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of unexpected DHCP frames received from client
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  9 }
+
+	mobilityProxyDHCPUnexpRemote	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of unexpected DHCP frames received from remote HA/FA.
+            "
+        ::= { wlsxMobilityProxyDHCPStatsGroup  10 }
+
+-- wlsxMobilityHAStatsGroup Begins
+
+
+	mobilityHARxRRQ	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request received by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  1 }
+
+
+	mobilityHASentRRP	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request reply sent by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  2 }
+
+
+	mobilityHARRQAccept	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request accepted by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  3 }
+
+
+	mobilityHARRQDenied	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request denied by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  4 }
+
+
+	mobilityHARRQIgnore	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request Ignored by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  5 }
+
+
+	mobilityHARRQAdminDeny	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request denied for Administrative reasons by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  6 }
+
+
+	mobilityHARRQNoResource	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request denied due to lack of resources by HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  7 }
+
+
+	mobilityHAMNauthFail	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of times MN-HA authentication failed
+            "
+        ::= { wlsxMobilityHAStatsGroup  8 }
+
+
+	mobilityHAFAauthFail	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of HA-FA authentication failed
+            "
+        ::= { wlsxMobilityHAStatsGroup  9 }
+
+
+	mobilityHABadID	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of mobileIP messages rejected by HA due to bad identification
+            "
+        ::= { wlsxMobilityHAStatsGroup  10 }
+
+	mobilityHAMalform	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of mobileIP messages rejected by HA as they are poorly formed
+            "
+        ::= { wlsxMobilityHAStatsGroup  11 }
+
+	mobilityHATooManyBnd	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration Request rejected due to too many bindings at HA
+            "
+        ::= { wlsxMobilityHAStatsGroup  12 }
+
+	mobilityHABndExpire	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of times binding expired
+            "
+        ::= { wlsxMobilityHAStatsGroup  13 }
+
+-- wlsxMobilityFAStatsGroup Begins
+
+	mobilityFASentRRQ	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request sent by FA
+            "
+        ::= { wlsxMobilityFAStatsGroup  1 }
+
+
+	mobilityFARcvRRP	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request reply received by FA
+            "
+        ::= { wlsxMobilityFAStatsGroup  2 }
+
+
+	mobilityFARRQAccept	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request accepted by HA
+            "
+        ::= { wlsxMobilityFAStatsGroup  3 }
+
+
+	mobilityFARRQReject	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration request rejected by HA
+            "
+        ::= { wlsxMobilityFAStatsGroup  4 }
+
+
+	mobilityMNHAauthFAIL	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of times MN-HA authentication failed
+            "
+        ::= { wlsxMobilityFAStatsGroup  5 }
+
+
+	mobilityFAHAauthFAIL	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of FA-HA authentication failed
+            "
+        ::= { wlsxMobilityFAStatsGroup  6 }
+
+
+	mobilityFABadID	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of mobileIP messages rejected by FA due to bad identification
+            "
+        ::= { wlsxMobilityFAStatsGroup  7 }
+
+	mobilityFAMalform	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of mobileIP messages rejected by FA as they are poorly formed
+            "
+        ::= { wlsxMobilityFAStatsGroup  8 }
+
+-- wlsxMobilityHAFARevocationStatsGroup Begins
+
+
+	mobilitySentRRVRQ	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration revocation request sent 
+            "
+        ::= { wlsxMobilityHAFARevocationStatsGroup  1 }
+
+	mobilityRcvRRVAck	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration revocation ack received
+            "
+        ::= { wlsxMobilityHAFARevocationStatsGroup  2 }
+
+	mobilityRcvRRV	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration revocation request received
+            "
+        ::= { wlsxMobilityHAFARevocationStatsGroup  3 }
+
+	mobilitySentRRVAck	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of received Registration revocation request ack sent
+            "
+        ::= { wlsxMobilityHAFARevocationStatsGroup  4 }
+
+	mobilityRRVRQIgnore	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration revocation request ignored
+            "
+        ::= { wlsxMobilityHAFARevocationStatsGroup  5 }
+
+	mobilityRRVAckIgnore	 OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This describes the number of Registration revocation ack Ignored
+            "
+        ::= { wlsxMobilityHAFARevocationStatsGroup  6 }
+
+END
diff --git a/MIBS/arubaos/WLSX-MON-MIB b/MIBS/arubaos/WLSX-MON-MIB
new file mode 100644
index 0000000..06fd04e
--- /dev/null
+++ b/MIBS/arubaos/WLSX-MON-MIB
@@ -0,0 +1,2959 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4: 
+WLSX-MON-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+	   ArubaEnableValue,
+	   ArubaFrameType,
+	   ArubaRogueApType,
+	   ArubaStationType,
+	   ArubaPhyType,
+	   ArubaAPMatchType,
+	   ArubaAPMatchMethod,
+	   ArubaHTMode,
+	   ArubaHTRate,
+	   ArubaMonEncryptionType,
+       ArubaMonEncryptionCipher,
+       ArubaMonAuthAlgorithm
+	   		FROM ARUBA-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxMonMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "
+		   This MIB module defines MIB objects which provide
+           information about the Monitored Access Points.
+		   "
+       REVISION         "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 6 }
+
+   wlsxMonStatsGroup     	OBJECT IDENTIFIER ::= { wlsxMonMIB 6 }
+   wlsxMonInfoGroup     	OBJECT IDENTIFIER ::= { wlsxMonMIB 7 }
+
+   wlsxMonAccessPointStatsGroup  OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 1 }
+   wlsxMonStationStatsGroup  OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 2 }
+
+-- Stats group contains tables for station statistics, channel statistics and
+-- AP statistics.
+
+   wlsxMonAPStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists the statistics of all the APs being monitored
+			by the controller. 
+		"
+      ::= { wlsxMonAccessPointStatsGroup 1 } 
+
+   wlsxMonAPStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Monitored Access Point Stats entry"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxMonAPStatsTable 1 } 
+
+   WlsxMonAPStatsEntry ::=
+     SEQUENCE {
+		 monPhyAddress				MacAddress,
+		 monRadioNumber				Integer32,
+		 monitoredApBSSID				MacAddress,
+		 monPhyType					ArubaPhyType,
+		 monAPCurrentChannel		    Unsigned32,
+		 monAPNumClients		    	Integer32,
+		 monAPTxPkts					Counter32,
+		 monAPTxBytes					Counter32,
+		 monAPRxPkts					Counter32,
+		 monAPRxBytes					Counter32,
+		 monAPTxDeauthentications		Counter32,
+		 monAPRxDeauthentications		Counter32,
+		 monAPChannelThroughput			Integer32,
+		 monAPFrameRetryRate			Integer32,
+		 monAPFrameLowSpeedRate			Integer32,
+		 monAPFrameNonUnicastRate		Integer32,
+		 monAPFrameFragmentationRate	Integer32,
+		 monAPFrameBandwidthRate		Integer32,
+		 monAPFrameRetryErrorRate		Integer32,
+		 monAPChannelErrorRate			Integer32,
+		 monAPESSID                     DisplayString,
+		 monAPRSSI                      Integer32,
+		 monAPFrameReceiveErrorRate		Integer32
+   }
+
+	monPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			MAC address of the air monitor that is monitoring the AP.
+            "
+        ::= { wlsxMonAPStatsEntry 1}
+
+	monRadioNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Radio number of the air monitor that is monitoring the AP.
+            "
+        ::= { wlsxMonAPStatsEntry 2 }
+
+	monitoredApBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the access point being monitored.
+            "
+        ::= { wlsxMonAPStatsEntry 3}
+
+	monPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			PHY type of the access point being monitored.
+            "
+        ::= { wlsxMonAPStatsEntry 4 }
+
+
+	monAPCurrentChannel OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Channel the monitored AP is using.
+            "
+        ::= { wlsxMonAPStatsEntry 5 }
+
+	monAPNumClients OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of clients associated to this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 6 }
+
+	monAPTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets transmitted by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 7 }
+
+	monAPTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes transmitted by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 8 }
+
+	monAPRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets received by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 9 }
+
+	monAPRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes received by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 10 }
+
+	monAPTxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of deauthentications transmitted by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 11 }
+
+	monAPRxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of deauthentications received by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 12 }
+
+	monAPChannelThroughput OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The throughput achieved on this channel by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 13 }
+
+	monAPFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of retry 
+			 packets as a percentage of the total packets
+			 transmitted and received by this monitored AP
+            "
+        ::= { wlsxMonAPStatsEntry 14 }
+
+	monAPFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
+			 for B band) packets as a percentage of the total packets
+			 transmitted and received by this monitored AP
+            "
+        ::= { wlsxMonAPStatsEntry 15 }
+
+	monAPFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The multicast rate on this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 16 }
+
+	monAPFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of fragments
+			 as a percentage of the total packets
+			 transmitted by this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 17 }
+
+	monAPFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The bandwidth of this monitored AP in Kbps.
+            "
+        ::= { wlsxMonAPStatsEntry 18 }
+
+	monAPFrameRetryErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS  	  deprecated
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received on this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 19 }
+	
+	monAPChannelErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of error packets 
+			 as a percentage of the total packets received
+			on the current channel.
+            "
+        ::= { wlsxMonAPStatsEntry 20 }
+
+	monAPESSID OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the access point being monitored.
+            "
+        ::= { wlsxMonAPStatsEntry 21 }
+
+	monAPRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			SNR of the access point being monitored.
+            "
+        ::= { wlsxMonAPStatsEntry 22 }
+
+	monAPFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received on this monitored AP.
+            "
+        ::= { wlsxMonAPStatsEntry 23 }
+	
+-- This table breaks down the AP statistics observed into different
+-- rate categories.
+
+   wlsxMonAPRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the monitored AP Packet and Byte Counts
+		but represented in terms of rate categories.
+		"
+	
+      ::= { wlsxMonAccessPointStatsGroup 2 } 
+
+     wlsxMonAPRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Data rate based packet and byte count entry for a monitored AP"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxMonAPRateStatsTable 1 } 
+	
+     WlsxMonAPRateStatsEntry ::=
+     SEQUENCE {
+		 monAPStatsTotPktsAt1Mbps			Counter32,
+		 monAPStatsTotBytesAt1Mbps			Counter32,
+		 monAPStatsTotPktsAt2Mbps			Counter32,
+		 monAPStatsTotBytesAt2Mbps			Counter32,
+		 monAPStatsTotPktsAt5Mbps			Counter32,
+		 monAPStatsTotBytesAt5Mbps			Counter32,
+		 monAPStatsTotPktsAt11Mbps			Counter32,
+		 monAPStatsTotBytesAt11Mbps		Counter32,
+		 monAPStatsTotPktsAt6Mbps			Counter32,
+		 monAPStatsTotBytesAt6Mbps			Counter32,
+		 monAPStatsTotPktsAt12Mbps			Counter32,
+		 monAPStatsTotBytesAt12Mbps		Counter32,
+		 monAPStatsTotPktsAt18Mbps			Counter32,
+		 monAPStatsTotBytesAt18Mbps		Counter32,
+		 monAPStatsTotPktsAt24Mbps			Counter32,
+		 monAPStatsTotBytesAt24Mbps		Counter32,
+		 monAPStatsTotPktsAt36Mbps			Counter32,
+		 monAPStatsTotBytesAt36Mbps		Counter32,
+		 monAPStatsTotPktsAt48Mbps			Counter32,
+		 monAPStatsTotBytesAt48Mbps		Counter32,
+		 monAPStatsTotPktsAt54Mbps			Counter32,
+		 monAPStatsTotBytesAt54Mbps		Counter32, 
+		 monAPStatsTotPktsAt9Mbps			Counter32,
+		 monAPStatsTotBytesAt9Mbps		Counter32
+     }
+
+     monAPStatsTotPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 1Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 1 }
+
+     monAPStatsTotBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 1Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 2 }
+
+     monAPStatsTotPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 2Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 3 }
+
+     monAPStatsTotBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 2Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 4 }
+
+     monAPStatsTotPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 5Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 5 }
+
+     monAPStatsTotBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 5Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 6 }
+
+     monAPStatsTotPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 11Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 7 }
+
+     monAPStatsTotBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 11Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 8 }
+
+     monAPStatsTotPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 6Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 9 }
+
+     monAPStatsTotBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 6Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 10 }
+
+     monAPStatsTotPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 12Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 11 }
+
+     monAPStatsTotBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 12Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 12 }
+
+     monAPStatsTotPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 18Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 13 }
+
+     monAPStatsTotBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 18Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 14 }
+
+     monAPStatsTotPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 24Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 15 }
+
+     monAPStatsTotBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 24Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 16 }
+
+     monAPStatsTotPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 36Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 17 }
+
+     monAPStatsTotBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 36Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 18 }
+
+     monAPStatsTotPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 48Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 19 }
+
+     monAPStatsTotBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 48Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 20 }
+
+     monAPStatsTotPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 54Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 21 }
+
+     monAPStatsTotBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 54Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 22 }
+
+     monAPStatsTotPktsAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			 from this BSSID at 9Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 23 }
+
+     monAPStatsTotBytesAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 from this BSSID at 9Mbps rate.
+            "
+        ::= { wlsxMonAPRateStatsEntry 24 }
+
+
+-- This table breaks down the channel statistics observed based on the
+-- Destination Address Types. 
+
+   wlsxMonAPDATypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per BSSID Packet and Byte Counts
+		but broken down in terms of Destination Address Type. 
+		"
+      ::= { wlsxMonAccessPointStatsGroup 3 } 
+
+     wlsxMonAPDATypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 Destination Address based packet and byte count entry for a
+			 monitored AP
+			 "
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxMonAPDATypeStatsTable 1 } 
+	
+     WlsxMonAPDATypeStatsEntry ::=
+     SEQUENCE {
+		 monAPStatsTotDABroadcastPkts		Counter32  ,
+		 monAPStatsTotDABroadcastBytes		Counter32  ,
+		 monAPStatsTotDAMulticastPkts		Counter32  ,
+		 monAPStatsTotDAMulticastBytes		Counter32  ,
+		 monAPStatsTotDAUnicastPkts			Counter32  ,
+		 monAPStatsTotDAUnicastBytes		Counter32  
+
+     }
+
+     monAPStatsTotDABroadcastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Broadcast packets 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPDATypeStatsEntry 1 }
+
+     monAPStatsTotDABroadcastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Broadcast Bytes 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPDATypeStatsEntry 2 }
+
+     monAPStatsTotDAMulticastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Multicast packets 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPDATypeStatsEntry 3 }
+
+     monAPStatsTotDAMulticastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Multicast Bytes 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPDATypeStatsEntry 4 }
+
+     monAPStatsTotDAUnicastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Unicast packets 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPDATypeStatsEntry 5 }
+
+     monAPStatsTotDAUnicastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Unicast Bytes 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPDATypeStatsEntry 6 }
+
+-- This table breaks down the channel statistics observed based on the
+-- the Type of the Packet. 
+
+   wlsxMonAPFrameTypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per BSSID Packet and Byte Counts
+		but broken down into different Frame Types. 
+		"
+      ::= { wlsxMonAccessPointStatsGroup 4 } 
+
+     wlsxMonAPFrameTypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Frame Type based packet and byte count entry for a monitored AP"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxMonAPFrameTypeStatsTable 1 } 
+	
+     WlsxMonAPFrameTypeStatsEntry ::=
+     SEQUENCE {
+		 monAPStatsTotMgmtPkts		Counter32  ,
+		 monAPStatsTotMgmtBytes	Counter32  ,
+		 monAPStatsTotCtrlPkts		Counter32  ,
+		 monAPStatsTotCtrlBytes	Counter32  ,
+		 monAPStatsTotDataPkts		Counter32  ,
+		 monAPStatsTotDataBytes	Counter32  
+
+     }
+
+     monAPStatsTotMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Management packets 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPFrameTypeStatsEntry 1 }
+
+     monAPStatsTotMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Management Bytes 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPFrameTypeStatsEntry 2 }
+
+     monAPStatsTotCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Control packets 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPFrameTypeStatsEntry 3 }
+
+     monAPStatsTotCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Control Bytes 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPFrameTypeStatsEntry 4 }
+
+     monAPStatsTotDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Data packets 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPFrameTypeStatsEntry 5 }
+
+     monAPStatsTotDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Data Bytes 
+			 observed from this BSSID.
+            "
+        ::= { wlsxMonAPFrameTypeStatsEntry 6 }
+
+-- This table breaks down the channel statistics observed into packet size 
+-- buckets.
+
+   wlsxMonAPPktSizeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per BSSID Packet and Byte Counts
+		but broken down into different Packet Sizes. 
+		"
+      ::= { wlsxMonAccessPointStatsGroup 5 } 
+
+     wlsxMonAPPktSizeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Packet Size based packet count entry for a BSSID"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxMonAPPktSizeStatsTable 1 } 
+	
+     WlsxMonAPPktSizeStatsEntry ::=
+     SEQUENCE {
+		 monAPStatsPkts63Bytes		Counter32  ,
+		 monAPStatsPkts64To127		Counter32  ,
+		 monAPStatsPkts128To255		Counter32  ,
+		 monAPStatsPkts256To511		Counter32  ,
+		 monAPStatsPkts512To1023	Counter32  ,
+		 monAPStatsPkts1024To1518	Counter32  
+
+     }
+
+     monAPStatsPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets transmitted
+			 by the AP that were less than 64 bytes long.
+            "
+        ::= { wlsxMonAPPktSizeStatsEntry 1 }
+
+     monAPStatsPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets transmitted
+			 by the AP that were between 64 and 127 bytes long.
+            "
+        ::= { wlsxMonAPPktSizeStatsEntry 2 }
+
+     monAPStatsPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets 
+			 transmitted by the AP that were between 128 and 255 bytes long.
+            "
+        ::= { wlsxMonAPPktSizeStatsEntry 3 }
+
+     monAPStatsPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets transmitted
+			 by the AP that were between 256 and 511 bytes long.
+            "
+        ::= { wlsxMonAPPktSizeStatsEntry 4 }
+
+     monAPStatsPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets transmitted
+			 by the AP that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsxMonAPPktSizeStatsEntry 5 }
+
+     monAPStatsPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets transmitted
+			 by the AP that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsxMonAPPktSizeStatsEntry 6 }
+
+-- This table breaks down the AP statistics observed into different
+-- HT rate categories.
+
+   wlsxMonAPHTRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPHTRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the monitored AP Packet and Byte Counts
+		but represented in terms of HT rate categories.
+		"
+	
+      ::= { wlsxMonAccessPointStatsGroup 6 } 
+
+     wlsxMonAPHTRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPHTRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Data rate based packet and byte count entry for a monitored AP"
+	  INDEX { monPhyAddress, monRadioNumber, monitoredApBSSID, monHTRate }
+      ::= { wlsxMonAPHTRateStatsTable 1 } 
+	
+     WlsxMonAPHTRateStatsEntry ::=
+     SEQUENCE {
+	 	 monHTRate					    ArubaHTRate,
+		 monAPStatsTotHTPkts			Counter32,
+		 monAPStatsTotHTBytes			Counter32
+	 }
+
+	monHTRate OBJECT-TYPE
+         SYNTAX       ArubaHTRate
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The rate at which the counters apply
+            "
+        ::= { wlsxMonAPHTRateStatsEntry 1 }
+
+	monAPStatsTotHTPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of packets processed at the indicated rate 
+            "
+        ::= { wlsxMonAPHTRateStatsEntry 2 }
+
+	monAPStatsTotHTBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of bytes processed at the indicated rate 
+            "
+        ::= { wlsxMonAPHTRateStatsEntry 3 }
+
+-- wlsxMonStationStatsGroup contains all the statistics observed by different 
+-- Air Monitors attached to this controller. 
+-- Station Statatistics are observed by the Air Monitor for that 
+-- specific Station.
+
+-- Station Statistics are grouped into Generic,
+-- Rate, Destination Address and Frame Type Stats.
+
+-- Station Statistics Group contains all the statistics related to 
+-- a Station.
+
+-- wlsxMonStationStatsTable will contain all the Agregate statistics collected
+-- for a Station
+
+   wlsxMonStationStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MonStationStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists the statistics of all the wireless stations being monitored
+			by an AP connected to this controller. 
+		"
+      ::= { wlsxMonStationStatsGroup 1} 
+
+   wlsxMonStationStatsEntry OBJECT-TYPE 
+	  SYNTAX       MonStationStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Monitored Station Stats Entry"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxMonStationStatsTable 1 } 
+
+   MonStationStatsEntry ::=
+     SEQUENCE {
+		 monitoredStaPhyAddress				MacAddress,
+		 monStaChannelNum				Unsigned32,
+		 monStaTxPkts					Counter32,
+		 monStaTxBytes					Counter32,
+		 monStaRxPkts					Counter32,
+		 monStaRxBytes					Counter32,
+		 monStaTxBCastPkts				Counter32,
+		 monStaTxBCastBytes			Counter32,
+		 monStaTxMCastPkts				Counter32,
+		 monStaTxMCastBytes			Counter32,
+		 monStaDataPkts				Counter32,
+		 monStaCtrlPkts				Counter32,
+		 monStaNumAssocRequests		Counter32,
+		 monStaNumAuthRequests			Counter32,
+		 monStaTxDeauthentications		Counter32,
+		 monStaRxDeauthentications		Counter32,
+		 monStaFrameRetryRate			Integer32,
+		 monStaFrameLowSpeedRate		Integer32,
+		 monStaFrameNonUnicastRate		Integer32,
+		 monStaFrameFragmentationRate	Integer32,
+		 monStaFrameBandwidthRate		Integer32,
+		 monStaFrameRetryErrorRate		Integer32,
+		 monStaBSSID				MacAddress,
+		 monStaESSID				DisplayString,
+		 monStaPhyType				ArubaPhyType,
+		 monStaRSSI					Integer32,
+		 monStaFrameReceiveErrorRate	Integer32
+   }
+
+	monitoredStaPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			MAC address of the monitored station
+            "
+        ::= { wlsxMonStationStatsEntry 1}
+
+	monStaChannelNum OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The channel the station is currently using.
+            "
+        ::= { wlsxMonStationStatsEntry 2 }
+
+	monStaTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 3 }
+
+	monStaTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 4 }
+
+	monStaRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 5 }
+
+	monStaRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 6 }
+
+	monStaTxBCastPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of broadcast packets transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 7 }
+
+	monStaTxBCastBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of broadcast bytes transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 8 }
+
+	monStaTxMCastPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of multicast packets transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 9 }
+
+	monStaTxMCastBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of multicast bytes transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 10 }
+
+	monStaDataPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of Data packets transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 11 }
+
+	monStaCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of Control packets transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 12 }
+
+	monStaNumAssocRequests OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of Association requests transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 13 }
+
+	monStaNumAuthRequests OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of Authentication requests transmitted by this station
+            "
+        ::= { wlsxMonStationStatsEntry 14 }
+
+	monStaTxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of Deauthentication frames transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 15 }
+
+	monStaRxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of Deauthentication frames received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 16 }
+
+	monStaFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of retry 
+			 packets as a percentage of the total packets
+			 transmitted and received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 17 }
+
+	monStaFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
+			 for B band) packets as a percentage of the total packets
+			 transmitted and received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 18 }
+
+	monStaFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of broadcast and multicast
+			 packets as a percentage of the total packets
+			 transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 19 }
+
+	monStaFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of fragments
+			 as a percentage of the total packets
+			 transmitted by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 20 }
+
+	monStaFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The bandwidth of this station in Kbps.
+            "
+        ::= { wlsxMonStationStatsEntry 21 }
+
+	monStaFrameRetryErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS  	  deprecated
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 22 }
+
+	monStaBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the station being monitored.
+            "
+        ::= { wlsxMonStationStatsEntry 23 }
+
+	monStaESSID OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the station being monitored.
+            "
+        ::= { wlsxMonStationStatsEntry 24 }
+
+	monStaPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			PHY type of the station being monitored.
+            "
+        ::= { wlsxMonStationStatsEntry 25 }
+
+	monStaRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			SNR of the station being monitored.
+            "
+        ::= { wlsxMonStationStatsEntry 26 }
+
+	monStaFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received by this station.
+            "
+        ::= { wlsxMonStationStatsEntry 27 }
+
+-- This table breaks down the Station statistics into different
+-- rate categories.
+
+   wlsxMonStaRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonStaRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for a monitored station
+		represented in terms of rate categories.
+		"
+      ::= { wlsxMonStationStatsGroup 2} 
+
+     wlsxMonStaRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonStaRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Data rate based packet and byte count entry for a monitored station"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxMonStaRateStatsTable 1 } 
+	
+     WlsxMonStaRateStatsEntry ::=
+     SEQUENCE {
+		 monStaTxPktsAt1Mbps				Counter32,
+		 monStaTxBytesAt1Mbps				Counter32,
+		 monStaTxPktsAt2Mbps				Counter32,
+		 monStaTxBytesAt2Mbps				Counter32,
+		 monStaTxPktsAt5Mbps				Counter32,
+		 monStaTxBytesAt5Mbps				Counter32,
+		 monStaTxPktsAt11Mbps				Counter32,
+		 monStaTxBytesAt11Mbps				Counter32,
+		 monStaTxPktsAt6Mbps				Counter32,
+		 monStaTxBytesAt6Mbps				Counter32,
+		 monStaTxPktsAt12Mbps				Counter32,
+		 monStaTxBytesAt12Mbps				Counter32,
+		 monStaTxPktsAt18Mbps				Counter32,
+		 monStaTxBytesAt18Mbps				Counter32,
+		 monStaTxPktsAt24Mbps				Counter32,
+		 monStaTxBytesAt24Mbps				Counter32,
+		 monStaTxPktsAt36Mbps				Counter32,
+		 monStaTxBytesAt36Mbps				Counter32,
+		 monStaTxPktsAt48Mbps				Counter32,
+		 monStaTxBytesAt48Mbps				Counter32,
+		 monStaTxPktsAt54Mbps				Counter32,
+		 monStaTxBytesAt54Mbps				Counter32,
+		 monStaRxPktsAt1Mbps				Counter32,
+		 monStaRxBytesAt1Mbps				Counter32,
+		 monStaRxPktsAt2Mbps				Counter32,
+		 monStaRxBytesAt2Mbps				Counter32,
+		 monStaRxPktsAt5Mbps				Counter32,
+		 monStaRxBytesAt5Mbps				Counter32,
+		 monStaRxPktsAt11Mbps				Counter32,
+		 monStaRxBytesAt11Mbps				Counter32,
+		 monStaRxPktsAt6Mbps				Counter32,
+		 monStaRxBytesAt6Mbps				Counter32,
+		 monStaRxPktsAt12Mbps				Counter32,
+		 monStaRxBytesAt12Mbps				Counter32,
+		 monStaRxPktsAt18Mbps				Counter32,
+		 monStaRxBytesAt18Mbps				Counter32,
+		 monStaRxPktsAt24Mbps				Counter32,
+		 monStaRxBytesAt24Mbps				Counter32,
+		 monStaRxPktsAt36Mbps				Counter32,
+		 monStaRxBytesAt36Mbps				Counter32,
+		 monStaRxPktsAt48Mbps				Counter32,
+		 monStaRxBytesAt48Mbps				Counter32,
+		 monStaRxPktsAt54Mbps				Counter32,
+		 monStaRxBytesAt54Mbps				Counter32,
+		 monStaTxPktsAt9Mbps				Counter32,
+		 monStaTxBytesAt9Mbps				Counter32,
+		 monStaRxPktsAt9Mbps				Counter32,
+		 monStaRxBytesAt9Mbps				Counter32
+     }
+
+     monStaTxPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 1 }
+
+     monStaTxBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 2 }
+
+     monStaTxPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 3 }
+
+     monStaTxBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 4 }
+
+     monStaTxPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 5 }
+
+     monStaTxBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 6 }
+
+     monStaTxPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 7 }
+
+     monStaTxBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 8 }
+
+     monStaTxPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 9 }
+
+     monStaTxBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 10 }
+
+     monStaTxPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 11 }
+
+     monStaTxBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 12 }
+
+     monStaTxPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 13 }
+
+     monStaTxBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 14 }
+
+     monStaTxPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 15 }
+
+     monStaTxBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 16 }
+
+     monStaTxPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 17 }
+
+     monStaTxBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 18 }
+
+     monStaTxPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 19 }
+
+     monStaTxBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 20 }
+
+     monStaTxPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets transmitted by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 21 }
+
+     monStaTxBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets transmitted by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 22 }
+
+     monStaRxPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 23 }
+
+     monStaRxBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 24 }
+
+     monStaRxPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 25 }
+
+     monStaRxBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 26 }
+
+     monStaRxPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 27 }
+
+     monStaRxBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 28 }
+
+     monStaRxPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 29 }
+
+     monStaRxBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 30 }
+
+     monStaRxPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 31 }
+
+     monStaRxBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 32 }
+
+     monStaRxPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 33 }
+
+     monStaRxBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 34 }
+
+     monStaRxPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 35 }
+
+     monStaRxBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 36 }
+
+     monStaRxPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 37 }
+
+     monStaRxBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 38 }
+
+     monStaRxPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 39 }
+
+     monStaRxBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 40 }
+
+     monStaRxPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 41 }
+
+     monStaRxBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 42 }
+
+     monStaRxPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 43 }
+
+     monStaRxBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 44 }
+
+
+     monStaTxPktsAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 45 }
+
+     monStaTxBytesAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 46 }
+
+
+     monStaRxPktsAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 47 }
+
+     monStaRxBytesAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxMonStaRateStatsEntry 48 }
+
+
+-- This table breaks down the Station statistics based on the
+-- Destination Address Types. 
+
+   wlsxMonStaDATypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonStaDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for a monitored station but
+		but broken down in terms of Destination Address Type. 
+		"
+      ::= { wlsxMonStationStatsGroup 3} 
+
+     wlsxMonStaDATypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonStaDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Data rate based packet and byte count entry for a monitored station"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxMonStaDATypeStatsTable 1 } 
+	
+     WlsxMonStaDATypeStatsEntry ::=
+     SEQUENCE {
+		 monStaTxDABroadcastPkts		Counter32  ,
+		 monStaTxDABroadcastBytes		Counter32  ,
+		 monStaTxDAMulticastPkts		Counter32  ,
+		 monStaTxDAMulticastBytes		Counter32  ,
+		 monStaTxDAUnicastPkts			Counter32  ,
+		 monStaTxDAUnicastBytes		Counter32  
+
+     }
+
+     monStaTxDABroadcastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Broadcast packets 
+			 transmitted by this Station.
+            "
+        ::= { wlsxMonStaDATypeStatsEntry 1 }
+
+     monStaTxDABroadcastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Broadcast Bytes 
+			 transmitted by this Station.
+            "
+        ::= { wlsxMonStaDATypeStatsEntry 2 }
+
+     monStaTxDAMulticastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Multicast packets 
+			 transmitted by this station.
+            "
+        ::= { wlsxMonStaDATypeStatsEntry 3 }
+
+     monStaTxDAMulticastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Multicast Bytes 
+			 transmitted by this station.
+            "
+        ::= { wlsxMonStaDATypeStatsEntry 4 }
+
+     monStaTxDAUnicastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total of Unicast packets 
+			 transmitted by this station.
+            "
+        ::= { wlsxMonStaDATypeStatsEntry 5 }
+
+     monStaTxDAUnicastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total of Unicast Bytes 
+			 transmitted by this station.
+            "
+        ::= { wlsxMonStaDATypeStatsEntry 6 }
+
+-- This table breaks down the Station statistics based on the
+-- the Type of the Packet. 
+
+   wlsxMonStaFrameTypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonStaFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for monitored
+		stations but broken down into different Frame Types. 
+		"
+      ::= { wlsxMonStationStatsGroup 4} 
+
+     wlsxMonStaFrameTypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonStaFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Frame Type based packet and byte count entry for a monitored station"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxMonStaFrameTypeStatsTable 1 } 
+	
+     WlsxMonStaFrameTypeStatsEntry ::=
+     SEQUENCE {
+		 monStaTxMgmtPkts		Counter32  ,
+		 monStaTxMgmtBytes		Counter32  ,
+		 monStaTxCtrlPkts		Counter32  ,
+		 monStaTxCtrlBytes		Counter32  ,
+		 monStaTxDataPkts		Counter32  ,
+		 monStaTxDataBytes		Counter32  ,
+		 monStaRxMgmtPkts		Counter32  ,
+		 monStaRxMgmtBytes		Counter32  ,
+		 monStaRxCtrlPkts		Counter32  ,
+		 monStaRxCtrlBytes		Counter32  ,
+		 monStaRxDataPkts		Counter32  ,
+		 monStaRxDataBytes		Counter32  
+
+     }
+
+     monStaTxMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the transmitted Management packets 
+			 from a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 1 }
+
+     monStaTxMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the transmitted Management Bytes 
+			 from a station
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 2 }
+
+     monStaTxCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the transmitted Control packets 
+			 from a station
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 3 }
+
+     monStaTxCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the transmitted Control Bytes 
+			 from a station
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 4 }
+
+     monStaTxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the transmitted Data packets 
+			 from a station
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 5 }
+
+     monStaTxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the transmitted Data Bytes 
+			 observed from this station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 6 }
+
+     monStaRxMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Management packets 
+			 at a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 7 }
+
+     monStaRxMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Management Bytes 
+			 at a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 8 }
+
+     monStaRxCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Control packets 
+			 at a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 9 }
+
+     monStaRxCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Control Bytes 
+			 at a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 10 }
+
+     monStaRxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Data packets 
+			 at a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 11 }
+
+     monStaRxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Data Bytes 
+			 at a station.
+            "
+        ::= { wlsxMonStaFrameTypeStatsEntry 12 }
+
+
+-- This table breaks down the Station statistics received or transmitted by a 
+-- station into packet size buckets. 
+
+   wlsxMonStaPktSizeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonStaPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for monitored
+		stations but broken down into different Packet Sizes. 
+		"
+      ::= { wlsxMonStationStatsGroup 5} 
+
+     wlsxMonStaPktSizeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonStaPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Packet Size based packet count entry for a monitored station"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxMonStaPktSizeStatsTable 1 } 
+	
+     WlsxMonStaPktSizeStatsEntry ::=
+     SEQUENCE {
+		 monStaTxPkts63Bytes		Counter32  ,
+		 monStaTxPkts64To127		Counter32  ,
+		 monStaTxPkts128To255		Counter32  ,
+		 monStaTxPkts256To511		Counter32  ,
+		 monStaTxPkts512To1023	Counter32  ,
+		 monStaTxPkts1024To1518	Counter32  ,
+		 monStaRxPkts63Bytes		Counter32  ,
+		 monStaRxPkts64To127		Counter32  ,
+		 monStaRxPkts128To255		Counter32  ,
+		 monStaRxPkts256To511		Counter32  ,
+		 monStaRxPkts512To1023	Counter32  ,
+		 monStaRxPkts1024To1518	Counter32  
+
+     }
+
+     monStaTxPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were less than 64 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 1 }
+
+     monStaTxPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 64 and 127 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 2 }
+
+     monStaTxPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 128 and 255 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 3 }
+
+     monStaTxPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 256 and 511 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 4 }
+
+     monStaTxPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 5 }
+
+     monStaTxPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 6 }
+
+     monStaRxPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were less than 64 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 7 }
+
+     monStaRxPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 64 and 127 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 8 }
+
+     monStaRxPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 128 and 255 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 9 }
+
+     monStaRxPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 256 and 511 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 10 }
+
+     monStaRxPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 11 }
+
+     monStaRxPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsxMonStaPktSizeStatsEntry 12 }
+
+
+-- Info group contains tables for monitored APs and stations
+
+   wlsxMonAccessPointInfoGroup  OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 1 }
+   wlsxMonStationInfoGroup  OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 2 }
+
+   wlsxMonAPInfoTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonAPInfoEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This lists all of the Access Points being monitored by 
+			the controller. 
+		"
+      ::= { wlsxMonAccessPointInfoGroup 1 } 
+
+   wlsxMonAPInfoEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonAPInfoEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Access Point Info entry"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxMonAPInfoTable 1 } 
+
+   WlsxMonAPInfoEntry ::=
+     SEQUENCE {
+		 monAPInfoPhyType				ArubaPhyType,
+		 monAPInfoCurrentChannel		Unsigned32,
+		 monAPInfoClassification		ArubaRogueApType,
+		 monAPInfoESSID                 DisplayString,
+		 monAPInfoRSSI                  Integer32,
+		 monAPInfoMonitorTime           TimeTicks,
+		 monAPInfoInactivityTime        TimeTicks,
+		 monAPInfoSnrSignalPkts         Integer32,
+		 monAPInfoSnrSampleTime         Integer32,
+		 monAPInfoStatus                INTEGER,
+		 monAPInfoConfidence			Integer32,
+		 monAPInfoMatchType				ArubaAPMatchType,
+		 monAPInfoMatchMethod			ArubaAPMatchMethod,
+		 monAPInfoHTMode				ArubaHTMode,
+		 monAPInfoEncryptionType        ArubaMonEncryptionType,
+		 monAPInfoWPAUnicastCipher      ArubaMonEncryptionCipher,
+		 monAPInfoWPAAuthAlgorithm      ArubaMonAuthAlgorithm,
+		 monAPInfoIBSS                  TruthValue
+   }
+
+	monAPInfoPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			PHY type of the access point being monitored.
+            "
+        ::= { wlsxMonAPInfoEntry 1 }
+
+
+	monAPInfoCurrentChannel OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Channel the monitored AP is using.
+            "
+        ::= { wlsxMonAPInfoEntry 2 }
+
+	monAPInfoClassification OBJECT-TYPE
+         SYNTAX       ArubaRogueApType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the type of the AP.
+            "
+        ::= { wlsxMonAPInfoEntry 3 }
+
+	monAPInfoESSID OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the access point being monitored.
+            "
+        ::= { wlsxMonAPInfoEntry 4 }
+
+	monAPInfoRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			SNR of the access point being monitored.
+            "
+        ::= { wlsxMonAPInfoEntry 5 }
+
+	monAPInfoMonitorTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+             This attribute indicates how long the access point has been
+			 monitored.
+            "
+        ::= { wlsxMonAPInfoEntry 6 }
+
+	monAPInfoInactivityTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+             This attribute indicates how long the access point has been
+			 inactive.
+            "
+        ::= { wlsxMonAPInfoEntry 7 }
+
+   monAPInfoSnrSignalPkts OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Number of Signal Packets observed by the Monitoring AP 
+			during this sample time.
+            "
+        ::= { wlsxMonAPInfoEntry 8 }
+
+   monAPInfoSnrSampleTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Sample Time in which SNR data was collected.
+            "
+        ::= { wlsxMonAPInfoEntry 9 }
+
+   monAPInfoStatus OBJECT-TYPE
+         SYNTAX       INTEGER { up(1), down(2) }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether this AP is considered to be up or down.
+            "
+        ::= { wlsxMonAPInfoEntry 10 }
+
+   monAPInfoConfidence OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the confidence that a suspected rogue AP is in fact a
+			rogue in terms of percentage.
+            "
+        ::= { wlsxMonAPInfoEntry 11 }
+
+   monAPInfoMatchType OBJECT-TYPE
+         SYNTAX       ArubaAPMatchType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The method used to classify the AP as a rogue or suspected rogue AP.
+            "
+        ::= { wlsxMonAPInfoEntry 12 }
+
+   monAPInfoMatchMethod OBJECT-TYPE
+         SYNTAX       ArubaAPMatchMethod
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the match occurred for rogue or suspect-rogue
+			classification: an exact or +1 or -1 MAC match.
+            "
+        ::= { wlsxMonAPInfoEntry 13 }
+
+   monAPInfoHTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the HT mode of the monitored AP, if any.
+            "
+        ::= { wlsxMonAPInfoEntry 14 }
+
+   monAPInfoEncryptionType OBJECT-TYPE
+         SYNTAX       ArubaMonEncryptionType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the Encryption type of the monitored AP.
+            "
+        ::= { wlsxMonAPInfoEntry 15 }
+
+   monAPInfoWPAUnicastCipher OBJECT-TYPE
+         SYNTAX       ArubaMonEncryptionCipher
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the WPA/WPA2 unicast cipher supported by the monitored AP.
+            If multiple ciphers are supported, the weakest will be indicated. 
+            "
+        ::= { wlsxMonAPInfoEntry 16 }
+
+   monAPInfoWPAAuthAlgorithm OBJECT-TYPE
+         SYNTAX       ArubaMonAuthAlgorithm
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the WPA/WPA2 authentication algorithm supported by the monitored AP.
+            If multiple authentication algorithms are supported, the weakest will be indicated. 
+            "
+        ::= { wlsxMonAPInfoEntry 17 }
+
+   monAPInfoIBSS OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates if the monitored AP is part of an adhoc network.
+            "
+        ::= { wlsxMonAPInfoEntry 18 }
+
+   wlsxMonStationInfoTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MonStationInfoEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists statistics of all the wireless stations 
+			being monitored. 
+		"
+      ::= { wlsxMonStationInfoGroup 1} 
+
+   wlsxMonStationInfoEntry OBJECT-TYPE 
+	  SYNTAX       MonStationInfoEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Info Entry"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxMonStationInfoTable 1 } 
+
+   MonStationInfoEntry ::=
+     SEQUENCE {
+		 monStaInfoChannelNum			Unsigned32,
+		 monStaInfoBSSID				MacAddress,
+		 monStaInfoESSID				DisplayString,
+		 monStaInfoPhyType				ArubaPhyType,
+		 monStaInfoRSSI					Integer32,
+		 monStaInfoClassification		ArubaStationType,
+		 monStaInfoMonitorTime			TimeTicks,
+		 monStaInfoInactivityTime		TimeTicks,
+		 monStaInfoSnrSignalPkts		Integer32,
+		 monStaInfoSnrSampleTime        Integer32,
+		 monStaInfoStatus               INTEGER,
+		 monStaInfoHTMode				ArubaHTMode
+   }
+
+	monStaInfoChannelNum OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The channel the station is currently using.
+            "
+        ::= { wlsxMonStationInfoEntry 1 }
+
+	monStaInfoBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the station being monitored.
+            "
+        ::= { wlsxMonStationInfoEntry 2 }
+
+	monStaInfoESSID OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the station being monitored.
+            "
+        ::= { wlsxMonStationInfoEntry 3 }
+
+	monStaInfoPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			PHY type the station being monitored.
+            "
+        ::= { wlsxMonStationInfoEntry 4 }
+
+	monStaInfoRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			SNR of the station being monitored.
+            "
+        ::= { wlsxMonStationInfoEntry 5 }
+
+	monStaInfoClassification OBJECT-TYPE
+         SYNTAX       ArubaStationType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            "
+        ::= { wlsxMonStationInfoEntry 6 }
+
+	monStaInfoMonitorTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+             This attribute indicates how long the station has been
+			 monitored.
+            "
+        ::= { wlsxMonStationInfoEntry 7 }
+
+	monStaInfoInactivityTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+             This attribute indicates how long the station has been
+			 inactive.
+            "
+        ::= { wlsxMonStationInfoEntry 8 }
+
+   monStaInfoSnrSignalPkts OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Number of Signal Packets observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxMonStationInfoEntry 9 }
+
+   monStaInfoSnrSampleTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Sample Time in which SNR data was collected.
+            "
+        ::= { wlsxMonStationInfoEntry 10 }
+
+   monStaInfoStatus OBJECT-TYPE
+         SYNTAX       INTEGER { up(1), down(2) }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether this station is considered up or down.
+            "
+        ::= { wlsxMonStationInfoEntry 11 }
+
+   monStaInfoHTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the HT mode of the station, if any.
+            "
+        ::= { wlsxMonStationInfoEntry 12 }
+
+-- Event table contains the event ID and the number of events of that type
+-- raised so far
+
+   wlsxMonEventCountTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MonEventCountEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists counts of Events generated by the APs.
+		"
+      ::= { wlsxMonStationStatsGroup 6} 
+
+   wlsxMonEventCountEntry OBJECT-TYPE 
+	  SYNTAX       MonEventCountEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Event Count Entry"
+	  INDEX {monEventID}
+      ::= { wlsxMonEventCountTable 1 } 
+
+   MonEventCountEntry ::=
+     SEQUENCE {
+		 monEventID			Unsigned32,
+		 monEventCount				Unsigned32
+   }
+
+	monEventID OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+		Event ID
+            "
+        ::= { wlsxMonEventCountEntry 1 }
+
+	monEventCount OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+		Event Count
+            "
+        ::= { wlsxMonEventCountEntry 2 }
+
+-- This table breaks down the station statistics observed into different
+-- HT rate categories.
+
+   wlsxMonStationHTRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxMonStationHTRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the monitored AP Packet and Byte Counts
+		but represented in terms of HT rate categories.
+		"
+	
+      ::= { wlsxMonStationStatsGroup 7 } 
+
+     wlsxMonStationHTRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxMonStationHTRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "HT Data rate based packet and byte count entry for a monitored station"
+	  INDEX { monPhyAddress, monRadioNumber, monitoredStaPhyAddress, monHTRate }
+      ::= { wlsxMonStationHTRateStatsTable 1 } 
+	
+     WlsxMonStationHTRateStatsEntry ::=
+     SEQUENCE {
+		 monStaTxHTPkts				Counter32,
+		 monStaTxHTBytes			Counter32,
+		 monStaRxHTPkts				Counter32,
+		 monStaRxHTBytes			Counter32
+	 }
+
+	 monStaTxHTPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of packets transmitted at the indicated rate 
+            "
+        ::= { wlsxMonStationHTRateStatsEntry 1 }
+
+	 monStaTxHTBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of bytes transmitted at the indicated rate 
+            "
+        ::= { wlsxMonStationHTRateStatsEntry 2 }
+
+	 monStaRxHTPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of packets received at the indicated rate 
+            "
+        ::= { wlsxMonStationHTRateStatsEntry 3 }
+
+	 monStaRxHTBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The total number of bytes received at the indicated rate 
+            "
+        ::= { wlsxMonStationHTRateStatsEntry 4 }
+
+END
diff --git a/MIBS/arubaos/WLSX-RS-MIB b/MIBS/arubaos/WLSX-RS-MIB
new file mode 100644
index 0000000..999f70a
--- /dev/null
+++ b/MIBS/arubaos/WLSX-RS-MIB
@@ -0,0 +1,900 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4: 
+WLSX-RS-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   Counter64,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+	   wlanAPMacAddress
+           FROM WLSX-WLAN-MIB
+
+	   ArubaEnableValue,
+	   ArubaActiveState,
+	   ArubaEnet1Mode,
+	   ArubaPortType,
+	   ArubaPortSpeed,
+	   ArubaPortDuplex,
+	   ArubaEnableValue,
+	   ArubaOperStateValue,
+       ArubaDot3azStatus,
+	   ArubaPoeState,
+	   ArubaAPDot1dState
+	   		FROM ARUBA-TC
+
+       LldpChassisIdSubtype,
+	   LldpChassisId,
+	   LldpPortIdSubtype,
+	   LldpPortId,
+	   LldpSystemCapabilitiesMap,
+	   LldpManAddress
+	        FROM LLDP-MIB
+
+       SnmpAdminString
+	       FROM SNMP-FRAMEWORK-MIB
+
+       AddressFamilyNumbers
+            FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxRSMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about remote user and node state."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 16 }
+
+   wlsxRemoteWiredGroup    	OBJECT IDENTIFIER ::= { wlsxRSMIB 1 }
+   wlsxRemoteUSBGroup     	OBJECT IDENTIFIER ::= { wlsxRSMIB 2 }
+
+   wlsxRemoteAccessPointPortGroup OBJECT IDENTIFIER ::= { wlsxRemoteWiredGroup 1 }
+   wlsxRemoteAccessPointUSBGroup  OBJECT IDENTIFIER ::= { wlsxRemoteUSBGroup 1 }
+
+-- Wired Ports
+
+   wlsxRemoteWiredPortTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF RemotePortEntry
+	  MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION 
+	  	"
+			This table enumerates the ports on the device
+		"
+      ::= { wlsxRemoteAccessPointPortGroup 1 } 
+
+   wlsxRemotePortEntry OBJECT-TYPE 
+	  SYNTAX       RemotePortEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Wired Port Entry"
+	  INDEX { wlanAPMacAddress, remotePortNumber }
+      ::= { wlsxRemoteWiredPortTable 1 } 
+
+   RemotePortEntry ::=
+     SEQUENCE {
+		 remotePortNumber			Unsigned32,
+		 remotePortMAC				MacAddress,
+		 remotePortMode				ArubaEnet1Mode,
+         remotePortSlotNumber		Unsigned32,
+         remotePortPortNumber		Unsigned32,
+		 remotePortType				ArubaPortType,
+		 remotePortAdminState		ArubaEnableValue,
+		 remotePortOperState		ArubaOperStateValue,
+		 remotePortSpeed			ArubaPortSpeed,
+		 remotePortDuplex			ArubaPortDuplex,
+		 remotePortTxPackets		Counter64,
+		 remotePortTxBytes			Counter64,
+		 remotePortRxPackets		Counter64,
+		 remotePortRxBytes			Counter64,
+		 remotePortDot3azStatus     ArubaDot3azStatus,
+		 remotePortName             DisplayString,
+		 remotePortPoEState         ArubaPoeState,
+		 remotePortSTPState         ArubaAPDot1dState
+   }
+
+   	remotePortNumber OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Port Index
+            "
+        ::= { wlsxRemotePortEntry 1 }
+
+   	remotePortMAC OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port MAC address
+            "
+        ::= { wlsxRemotePortEntry 2 }
+
+   	remotePortMode OBJECT-TYPE
+         SYNTAX       ArubaEnet1Mode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port Mode
+            "
+        ::= { wlsxRemotePortEntry 3 }
+
+   	remotePortSlotNumber OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Slot Number
+            "
+        ::= { wlsxRemotePortEntry 4 }
+
+   	remotePortPortNumber OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port Number
+            "
+        ::= { wlsxRemotePortEntry 5 }
+
+   	remotePortType OBJECT-TYPE
+         SYNTAX       ArubaPortType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port Type
+            "
+        ::= { wlsxRemotePortEntry 6 }
+
+   	remotePortAdminState OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Administrative state
+            "
+        ::= { wlsxRemotePortEntry 7 }
+
+   	remotePortOperState OBJECT-TYPE
+         SYNTAX       ArubaOperStateValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Operational State
+            "
+        ::= { wlsxRemotePortEntry 8 }
+
+   	remotePortSpeed OBJECT-TYPE
+         SYNTAX       ArubaPortSpeed
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port Speed
+            "
+        ::= { wlsxRemotePortEntry 9 }
+
+   	remotePortDuplex OBJECT-TYPE
+         SYNTAX       ArubaPortDuplex
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port Duplex
+            "
+        ::= { wlsxRemotePortEntry 10 }
+
+   	remotePortTxPackets OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Transmitted frames
+            "
+        ::= { wlsxRemotePortEntry 11 }
+
+   	remotePortTxBytes OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Transmitted bytes
+            "
+        ::= { wlsxRemotePortEntry 12 }
+
+   	remotePortRxPackets OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Received frames
+            "
+        ::= { wlsxRemotePortEntry 13 }
+
+   	remotePortRxBytes OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Received bytes
+            "
+        ::= { wlsxRemotePortEntry 14 }
+
+   	remotePortDot3azStatus OBJECT-TYPE
+         SYNTAX       ArubaDot3azStatus
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			802.3az status
+            "
+        ::= { wlsxRemotePortEntry 15 }
+
+   	remotePortName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of the port
+            "
+        ::= { wlsxRemotePortEntry 16 }
+
+   	remotePortPoEState OBJECT-TYPE
+         SYNTAX       ArubaPoeState
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			PSE status
+            "
+        ::= { wlsxRemotePortEntry 17 }
+
+   	remotePortSTPState OBJECT-TYPE
+         SYNTAX       ArubaAPDot1dState
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			STP status
+            "
+        ::= { wlsxRemotePortEntry 18 }
+
+-- USB
+
+   wlsxRemoteUSBTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF USBEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table enumerates the ports on the device
+		"
+      ::= { wlsxRemoteAccessPointUSBGroup 1 } 
+
+   wlsxUSBEntry OBJECT-TYPE 
+	  SYNTAX       USBEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Wired Port Entry"
+	  INDEX {wlanAPMacAddress, usbDevNumber}
+      ::= { wlsxRemoteUSBTable 1 } 
+
+   USBEntry ::=
+     SEQUENCE {
+         usbDevNumber				Unsigned32,
+		 usbStatus					DisplayString,
+		 usbManufacturer			DisplayString,
+		 usbProduct					DisplayString,
+		 usbSerialNumber			DisplayString,
+		 usbVendor					DisplayString,
+		 usbProductID				DisplayString,
+		 usbDriver					DisplayString,
+                 usbRSSI                        DisplayString,
+                 usbNetworkServiceLevel         DisplayString,
+                 usbFirmwareVersion             DisplayString,
+                 usbEsnNumber                   DisplayString,
+                 usbifOperStatus                ArubaOperStateValue,
+                 usbifInUcastPkts               Counter64,
+                 usbifInUcastOctets             Counter64,
+                 usbifOutUcastPkts              Counter64,
+                 usbifOutUcastOctets            Counter64,
+                 usbifInErrors                  Counter64,
+                 usbifOutErrors                 Counter64
+
+   }
+
+   	usbDevNumber OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Device Number (1-based)
+            "
+        ::= { wlsxUSBEntry 1 }
+
+   	usbStatus OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Device Status
+            "
+        ::= { wlsxUSBEntry 2 }
+
+   	usbManufacturer OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Manufacturer
+            "
+        ::= { wlsxUSBEntry 3 }
+
+   	usbProduct OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Product
+            "
+        ::= { wlsxUSBEntry 4 }
+
+   	usbSerialNumber OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Serial Number
+            "
+        ::= { wlsxUSBEntry 5 }
+
+   	usbVendor OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Vendor ID
+            "
+        ::= { wlsxUSBEntry 6 }
+
+   	usbProductID OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Product ID
+            "
+        ::= { wlsxUSBEntry 7 }
+
+   	usbDriver OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Driver module
+            "
+        ::= { wlsxUSBEntry 8 }
+
+        usbRSSI OBJECT-TYPE
+           SYNTAX       DisplayString
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                        RSSI
+              "
+          ::= { wlsxUSBEntry 9 }
+  
+        usbNetworkServiceLevel OBJECT-TYPE
+           SYNTAX       DisplayString
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                      Network Service Level
+              "
+          ::= { wlsxUSBEntry 10 }
+  
+        usbFirmwareVersion OBJECT-TYPE
+           SYNTAX       DisplayString
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                        Firmware Version
+              "
+          ::= { wlsxUSBEntry 11 }
+  
+        usbEsnNumber OBJECT-TYPE
+           SYNTAX       DisplayString
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                        ESN Number
+              "
+          ::= { wlsxUSBEntry 12 }
+  
+        usbifOperStatus OBJECT-TYPE
+           SYNTAX       ArubaOperStateValue
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                        Operational Status of the USB Interface
+              "
+          ::= { wlsxUSBEntry 13 }
+
+        usbifInUcastPkts OBJECT-TYPE
+           SYNTAX       Counter64
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                Received Unicast Packets        
+              "
+          ::= { wlsxUSBEntry 14 }
+  
+        usbifInUcastOctets OBJECT-TYPE
+           SYNTAX       Counter64
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                  Received Bytes                      
+              "
+          ::= { wlsxUSBEntry 15 }
+  
+        usbifOutUcastPkts OBJECT-TYPE
+           SYNTAX       Counter64
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                Transmitted Unicast Packets     
+              "
+          ::= { wlsxUSBEntry 16 }
+ 
+        usbifOutUcastOctets OBJECT-TYPE
+           SYNTAX       Counter64
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                Transmitted Bytes       
+              "
+          ::= { wlsxUSBEntry 17 }
+  
+        usbifInErrors OBJECT-TYPE
+           SYNTAX       Counter64
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                Errors in Incoming Interface
+              "
+          ::= { wlsxUSBEntry 18 }
+
+        usbifOutErrors OBJECT-TYPE
+           SYNTAX       Counter64
+           MAX-ACCESS   read-only
+           STATUS       current
+           DESCRIPTION
+              "
+                Errors in Outgoing Interface
+              "
+          ::= { wlsxUSBEntry 19 }
+
+
+-- Wired User Statistics
+
+    wlsxRemoteWiredUserStatsTable  OBJECT-TYPE
+        SYNTAX       SEQUENCE OF RemoteWiredUserStatsEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+            "
+                This table enumerates the wired user statistics on the device
+            "
+        ::= { wlsxRemoteAccessPointPortGroup 2 }
+
+    wlsxRemoteWiredUserStatsEntry OBJECT-TYPE
+        SYNTAX       RemoteWiredUserStatsEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+             "Wired User Stats Entry"
+        INDEX { remoteWiredUserPhyAddress }
+        ::= { wlsxRemoteWiredUserStatsTable 1 }
+
+    RemoteWiredUserStatsEntry ::=
+        SEQUENCE {
+            remoteWiredUserPhyAddress           MacAddress,
+            remoteWiredUserSlot                 Unsigned32,
+            remoteWiredUserPort                 Unsigned32,
+            remoteWiredUserVlan                 Unsigned32,
+            remoteWiredUserTxPkts               Counter32,
+            remoteWiredUserTxBytes              Counter32,
+            remoteWiredUserRxPkts               Counter32,
+            remoteWiredUserRxBytes              Counter32,
+            remoteWiredUserTxBCastPkts          Counter32,
+            remoteWiredUserTxBCastBytes         Counter32,
+            remoteWiredUserTxMCastPkts          Counter32,
+            remoteWiredUserTxMCastBytes         Counter32
+        }
+
+        remoteWiredUserPhyAddress OBJECT-TYPE
+            SYNTAX       MacAddress
+            MAX-ACCESS   not-accessible
+            STATUS       current
+            DESCRIPTION
+            "
+               The Physical Address of the Wired User.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 1 }
+
+        remoteWiredUserSlot OBJECT-TYPE
+            SYNTAX       Unsigned32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The Physical slot to which this user is connected to.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 2 }
+
+        remoteWiredUserPort OBJECT-TYPE
+            SYNTAX       Unsigned32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The Physical port to which this user is connected to.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 3 }
+
+        remoteWiredUserVlan OBJECT-TYPE
+            SYNTAX       Unsigned32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The VLAN to which this user is connected to.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 4 }
+
+        remoteWiredUserTxPkts OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of packets transmitted by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 5 }
+
+        remoteWiredUserTxBytes OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of bytes transmitted by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 6 }
+
+        remoteWiredUserRxPkts OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of packets received by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 7 }
+
+        remoteWiredUserRxBytes OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of bytes received by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 8 }
+
+        remoteWiredUserTxBCastPkts OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of broadcast packets transmitted by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 9 }
+
+        remoteWiredUserTxBCastBytes OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of broadcast bytes transmitted by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 10 }
+
+        remoteWiredUserTxMCastPkts OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of multicast packets transmitted by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 11 }
+
+        remoteWiredUserTxMCastBytes OBJECT-TYPE
+            SYNTAX       Counter32
+            MAX-ACCESS   read-only
+            STATUS       current
+            DESCRIPTION
+            "
+                The number of multicast bytes transmitted by this user.
+            "
+            ::= { wlsxRemoteWiredUserStatsEntry 12 }
+
+   wlsxLldpNeighborTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF LldpNeighborEntry
+	  MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION 
+	  	"
+			This table enumerates the LLDP neighbors discovered by the
+			access point.
+		"
+      ::= { wlsxRemoteAccessPointPortGroup 3 } 
+
+   wlsxLldpNeighborEntry OBJECT-TYPE 
+	  SYNTAX       LldpNeighborEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "LLDP Neighbor Entry"
+	  INDEX { wlanAPMacAddress, remotePortNumber, lldpNeighborIndex }
+      ::= { wlsxLldpNeighborTable 1 } 
+
+   LldpNeighborEntry ::=
+     SEQUENCE {
+		 lldpNeighborIndex                  Unsigned32,
+		 lldpNeighborChassisIdSubtype       LldpChassisIdSubtype,
+		 lldpNeighborChassisId              LldpChassisId,
+		 lldpNeighborPortIdSubtype          LldpPortIdSubtype,
+		 lldpNeighborPortId                 LldpPortId,
+		 lldpNeighborPortDesc               SnmpAdminString,
+		 lldpNeighborSysName                SnmpAdminString,
+		 lldpNeighborSysDesc                SnmpAdminString,
+		 lldpNeighborSysCapSupported        LldpSystemCapabilitiesMap,
+		 lldpNeighborSysCapEnabled          LldpSystemCapabilitiesMap
+   }
+
+   lldpNeighborIndex OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Neighbor Index
+            "
+       ::= { wlsxLldpNeighborEntry 1 }
+
+   lldpNeighborChassisIdSubtype OBJECT-TYPE
+         SYNTAX       LldpChassisIdSubtype
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The subtype of the neighbor's chassis ID
+            "
+       ::= { wlsxLldpNeighborEntry 2 }
+
+   lldpNeighborChassisId OBJECT-TYPE
+         SYNTAX       LldpChassisId
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The neighbor's chassis ID
+            "
+       ::= { wlsxLldpNeighborEntry 3 }
+
+   lldpNeighborPortIdSubtype OBJECT-TYPE
+         SYNTAX       LldpPortIdSubtype
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The subtype of the neighbor's port ID
+            "
+       ::= { wlsxLldpNeighborEntry 4 }
+
+   lldpNeighborPortId OBJECT-TYPE
+         SYNTAX       LldpPortId
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The neighbor's port ID
+            "
+       ::= { wlsxLldpNeighborEntry 5 }
+
+   lldpNeighborPortDesc OBJECT-TYPE
+         SYNTAX       SnmpAdminString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of the neighbor's port
+            "
+       ::= { wlsxLldpNeighborEntry 6 }
+
+   lldpNeighborSysName OBJECT-TYPE
+         SYNTAX       SnmpAdminString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of the neighbor
+            "
+       ::= { wlsxLldpNeighborEntry 7 }
+
+   lldpNeighborSysDesc OBJECT-TYPE
+         SYNTAX       SnmpAdminString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The description of the neighbor
+            "
+       ::= { wlsxLldpNeighborEntry 8 }
+
+   lldpNeighborSysCapSupported OBJECT-TYPE
+         SYNTAX       LldpSystemCapabilitiesMap
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The supported set of capabilities
+            "
+       ::= { wlsxLldpNeighborEntry 9 }
+
+   lldpNeighborSysCapEnabled OBJECT-TYPE
+         SYNTAX       LldpSystemCapabilitiesMap
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The enabled set of capabilities
+            "
+       ::= { wlsxLldpNeighborEntry 10 }
+
+   wlsxLldpNeighborManAddrTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF LldpNeighborManAddrEntry
+	  MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION 
+	  	"
+			This table enumerates the LLDP neighbor management address 
+			discovered by the access point.
+		"
+      ::= { wlsxRemoteAccessPointPortGroup 4 } 
+
+   wlsxLldpNeighborManAddrEntry OBJECT-TYPE 
+	  SYNTAX       LldpNeighborManAddrEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "LLDP Neighbor Entry"
+	  INDEX { wlanAPMacAddress, remotePortNumber, lldpNeighborIndex, 
+	         lldpNeighborManAddrIndex
+			}
+      ::= { wlsxLldpNeighborManAddrTable 1 } 
+
+   LldpNeighborManAddrEntry ::=
+     SEQUENCE {
+		 lldpNeighborManAddrIndex   Unsigned32,
+		 lldpNeighborManAddrSubtype AddressFamilyNumbers,
+		 lldpNeighborManAddr        LldpManAddress
+	 }
+
+   lldpNeighborManAddrIndex OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Indexes the neighbor's management addresses
+            "
+       ::= { wlsxLldpNeighborManAddrEntry 1 }
+
+   lldpNeighborManAddrSubtype OBJECT-TYPE
+         SYNTAX       AddressFamilyNumbers
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The subtype of the management address
+            "
+       ::= { wlsxLldpNeighborManAddrEntry 2 }
+
+   lldpNeighborManAddr OBJECT-TYPE
+         SYNTAX       LldpManAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			A neighbors management address
+            "
+       ::= { wlsxLldpNeighborManAddrEntry 3 }
+
+
+END
diff --git a/MIBS/arubaos/WLSX-SNR-MIB b/MIBS/arubaos/WLSX-SNR-MIB
new file mode 100644
index 0000000..049ccff
--- /dev/null
+++ b/MIBS/arubaos/WLSX-SNR-MIB
@@ -0,0 +1,401 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim: set ts=4 sw=4:
+WLSX-SNR-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+	  monPhyAddress, 
+	  monRadioNumber, 
+	  monitoredStaPhyAddress,
+	  monitoredApBSSID
+			FROM WLSX-MON-MIB
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxSNRMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "
+		   This MIB module defines MIB objects which provide
+           information about the Wireless Management System (WMS) in the 
+		   Aruba controller.
+		   "
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 7 }
+
+   wlsxSNRGroup     		OBJECT IDENTIFIER ::= { wlsxSNRMIB 1 }
+
+ -- AP SNR Table
+
+   wlsxAPSnrTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxAPSnrEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists SNR information about monitored APs. 
+		"
+      ::= { wlsxSNRGroup 1 } 
+
+   wlsxAPSnrEntry OBJECT-TYPE 
+	  SYNTAX       WlsxAPSnrEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
+      ::= { wlsxAPSnrTable 1 } 
+
+   WlsxAPSnrEntry ::=
+     SEQUENCE {
+		 apSnrAverageSignalStrength		Integer32,
+		 apSnrSignalPkts					Integer32,
+		 apSnrHighestRxSignalStrength		Integer32,
+		 apSnrLowestRxSignalStrength		Integer32,
+		 apSnrSampleTime					Integer32
+   }
+
+   apSnrAverageSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Total Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrEntry 1 }
+
+   apSnrSignalPkts OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Number of Signal Packets observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrEntry 2 }
+
+   apSnrHighestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Highest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrEntry 3 }
+
+   apSnrLowestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Lowest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrEntry 4 }
+
+
+   apSnrSampleTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Sample Time in which this data is collected.
+            "
+        ::= { wlsxAPSnrEntry 5 }
+
+ -- Station SNR Table
+
+   wlsxStaSnrTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxStaSnrEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists SNR information about monitored stations. 
+		"
+      ::= { wlsxSNRGroup 2 } 
+
+   wlsxStaSnrEntry OBJECT-TYPE 
+	  SYNTAX       WlsxStaSnrEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
+      ::= { wlsxStaSnrTable 1 } 
+
+   WlsxStaSnrEntry ::=
+     SEQUENCE {
+		 staSnrAverageSignalStrength		Integer32,
+		 staSnrSignalPkts					Integer32,
+		 staSnrHighestRxSignalStrength		Integer32,
+		 staSnrLowestRxSignalStrength		Integer32,
+		 staSnrSampleTime					Integer32
+   }
+
+   staSnrAverageSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Total Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrEntry 1 }
+
+   staSnrSignalPkts OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Number of Signal Packets observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrEntry 2 }
+
+   staSnrHighestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Highest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrEntry 3 }
+
+   staSnrLowestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Lowest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrEntry 4 }
+
+
+   staSnrSampleTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Sample Time in which this data is collected.
+            "
+        ::= { wlsxStaSnrEntry 5 }
+
+
+ -- AP SNR Table Ordered by the BSSID
+
+   wlsxAPSnrBSSIDTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxAPSnrBSSIDEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table SNR information about monitored APs. 
+		"
+      ::= { wlsxSNRGroup 3 } 
+
+   wlsxAPSnrBSSIDEntry OBJECT-TYPE 
+	  SYNTAX       WlsxAPSnrBSSIDEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {monitoredApBSSID, monPhyAddress, monRadioNumber}
+      ::= { wlsxAPSnrBSSIDTable 1 } 
+
+   WlsxAPSnrBSSIDEntry ::=
+     SEQUENCE {
+		 apSnrBSSIDAverageSignalStrength		Integer32,
+		 apSnrBSSIDSignalPkts					Integer32,
+		 apSnrBSSIDHighestRxSignalStrength		Integer32,
+		 apSnrBSSIDLowestRxSignalStrength		Integer32,
+		 apSnrBSSIDSampleTime					Integer32
+   }
+
+   apSnrBSSIDAverageSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Total Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrBSSIDEntry 1 }
+
+   apSnrBSSIDSignalPkts OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Number of Signal Packets observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrBSSIDEntry 2 }
+
+   apSnrBSSIDHighestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Highest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrBSSIDEntry 3 }
+
+   apSnrBSSIDLowestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Lowest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxAPSnrBSSIDEntry 4 }
+
+
+   apSnrBSSIDSampleTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Sample Time in which this data is collected.
+            "
+        ::= { wlsxAPSnrBSSIDEntry 5 }
+
+ -- Station SNR Station Phy Table
+
+   wlsxStaSnrPhyTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxStaSnrPhyEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists SNR information about monitored stations. 
+		"
+      ::= { wlsxSNRGroup 4 } 
+
+   wlsxStaSnrPhyEntry OBJECT-TYPE 
+	  SYNTAX       WlsxStaSnrPhyEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {monitoredStaPhyAddress, monPhyAddress, monRadioNumber}
+      ::= { wlsxStaSnrPhyTable 1 } 
+
+   WlsxStaSnrPhyEntry ::=
+     SEQUENCE {
+		 staSnrPhyAverageSignalStrength		Integer32,
+		 staSnrPhySignalPkts					Integer32,
+		 staSnrPhyHighestRxSignalStrength		Integer32,
+		 staSnrPhyLowestRxSignalStrength		Integer32,
+		 staSnrPhySampleTime					Integer32
+   }
+
+   staSnrPhyAverageSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Total Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrPhyEntry 1 }
+
+   staSnrPhySignalPkts OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Number of Signal Packets observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrPhyEntry 2 }
+
+   staSnrPhyHighestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Highest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrPhyEntry 3 }
+
+   staSnrPhyLowestRxSignalStrength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Lowest Signal Strength observed by the Monitoring station 
+			during this sample time.
+            "
+        ::= { wlsxStaSnrPhyEntry 4 }
+
+
+   staSnrPhySampleTime OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Sample Time in which this data is collected.
+            "
+        ::= { wlsxStaSnrPhyEntry 5 }
+END
diff --git a/MIBS/arubaos/WLSX-STATS-MIB b/MIBS/arubaos/WLSX-STATS-MIB
new file mode 100644
index 0000000..55963bb
--- /dev/null
+++ b/MIBS/arubaos/WLSX-STATS-MIB
@@ -0,0 +1,121 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-STATS-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxStatsMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the Statistics in the 
+			Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 15 }
+
+   wlsxStatsOpGroup     	OBJECT IDENTIFIER ::= { wlsxStatsMIB 1 }
+
+   wlsxStatsRequestTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF WlsxStatsRequestEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION
+		"
+		"
+	::= { wlsxStatsOpGroup 1 }
+
+	wlsxStatsRequestEntry OBJECT-TYPE
+		SYNTAX WlsxStatsRequestEntry
+		MAX-ACCESS not-accessible
+		STATUS	current
+		DESCRIPTION
+			""
+		INDEX { wlsxStatsIndex }
+		::= { wlsxStatsRequestTable 1 }
+
+	WlsxStatsRequestEntry ::=
+		SEQUENCE {
+			wlsxStatsIndex	    Integer32,
+			wlsxStatsReqType    Integer32,
+			wlsxStatsInterval	Integer32,
+			wlsxStatsCookie	    DisplayString
+		}
+
+	wlsxStatsIndex OBJECT-TYPE
+		SYNTAX 	Integer32
+		MAX-ACCESS not-accessible
+		STATUS	current
+		DESCRIPTION
+			"
+				Stats Index
+			"
+		::= { wlsxStatsRequestEntry 1 }
+
+	wlsxStatsReqType OBJECT-TYPE
+		SYNTAX 	Integer32
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				Request Type
+			"
+		::= { wlsxStatsRequestEntry 2 }
+
+	wlsxStatsInterval OBJECT-TYPE
+		SYNTAX 	Integer32
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				Stats Interval
+			"
+		::= { wlsxStatsRequestEntry 3 }
+
+	wlsxStatsCookie OBJECT-TYPE
+		SYNTAX 	DisplayString
+		MAX-ACCESS read-write
+		STATUS	current
+		DESCRIPTION
+			"
+				Cookie for the config sync operation
+			"
+		::= { wlsxStatsRequestEntry 4 }
+
+END
diff --git a/MIBS/arubaos/WLSX-SWITCH-MIB b/MIBS/arubaos/WLSX-SWITCH-MIB
new file mode 100644
index 0000000..461e393
--- /dev/null
+++ b/MIBS/arubaos/WLSX-SWITCH-MIB
@@ -0,0 +1,2514 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+   WLSX-SWITCH-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxSwitchMIB MODULE-IDENTITY
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626" 
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            System level information about the Aruba switches."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 1 }
+
+   wlsxSystemXGroup         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 1 }
+   wlsxUserInfoGroup         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 2 }
+   wlsxAccessPointInfoGroup     OBJECT IDENTIFIER ::= { wlsxSwitchMIB 3 }
+   wlsxInstantAccessPointInfoGroup      OBJECT IDENTIFIER ::= { wlsxSwitchMIB 5 }
+   wlsxSwitchTraps         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 100 }
+
+   -- wlsxSystemXGroup contains objects to describe a switch.
+
+   wlsxHostname OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..32))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Name of the switch."
+        ::= { wlsxSystemXGroup 1 }
+
+   wlsxModelName OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..32))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Model Name of the switch."
+        ::= { wlsxSystemXGroup 2 }
+
+   wlsxSwitchIp OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Switch IP as configured by the user. This IP address uniquely 
+			identifies the switch."
+        ::= { wlsxSystemXGroup 3 }
+
+   wlsxSwitchRole OBJECT-TYPE
+        SYNTAX      INTEGER {
+						master(1),
+						local(2),
+						standbymaster(3),
+						branch(4),
+						md(5)
+						}
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Role of this switch in the Switch Domain."
+        ::= { wlsxSystemXGroup 4 }
+
+   wlsxSwitchMasterIp OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 Master IP of the switch
+			"
+        ::= { wlsxSystemXGroup 5 }
+
+
+-- Switch List Table contains all the switches in the domain. This table is 
+-- valid only when queried from the master switch.
+
+   wlsxSwitchListTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchListEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"This Table will list all the switches in the Switch Domain.
+		 It will be populated only on the master switch. Local switches
+		 return empty table.
+		"
+	
+      ::= { wlsxSystemXGroup 6 } 
+
+     wlsxSwitchListEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchListEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Switch List Entry"
+	  INDEX { switchListSwitchIPAddress}
+      ::= { wlsxSwitchListTable 1 } 
+
+     MxSwitchListEntry ::=
+     SEQUENCE {
+         switchListSwitchIPAddress	IpAddress,
+         switchListSwitchRole 		INTEGER
+     }
+
+     switchListSwitchIPAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			IP Address of the switch.
+            "
+        ::= { wlsxSwitchListEntry 1 }
+
+     switchListSwitchRole OBJECT-TYPE
+        SYNTAX      INTEGER {
+						master(1),
+						local(2),
+						standbymaster(3),
+						branch(4),
+						md(5)
+					}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Role of the Switch.
+            "
+        ::= { wlsxSwitchListEntry 2 }
+
+
+   wlsxSwitchLicenseCount OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 The number of licenses installed on the switch
+			"
+        ::= { wlsxSystemXGroup 7 }
+
+
+-- The license table lists all valid licenses installed on the switch
+
+   wlsxSwitchLicenseTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF LicenseEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"This table lists all licenses installed on the switch.
+		"
+	
+      ::= { wlsxSystemXGroup 8 } 
+
+     wlsxLicenseEntry OBJECT-TYPE 
+	  SYNTAX       LicenseEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "License Entry"
+	  INDEX { licenseIndex }
+      ::= { wlsxSwitchLicenseTable 1 } 
+
+     LicenseEntry ::=
+     SEQUENCE {
+     	 licenseIndex           Integer32,
+         licenseKey				DisplayString,
+         licenseInstalled		DisplayString,
+         licenseExpires			DisplayString,
+         licenseFlags			DisplayString,
+         licenseService 		DisplayString
+     }
+
+     licenseIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			License ID number
+            "
+        ::= { wlsxLicenseEntry 1 }
+
+     licenseKey OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License Key
+            "
+        ::= { wlsxLicenseEntry 2 }
+
+     licenseInstalled OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License installation time
+            "
+        ::= { wlsxLicenseEntry 3 }
+
+     licenseExpires OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License expiry time
+            "
+        ::= { wlsxLicenseEntry 4 }
+
+     licenseFlags OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License flags; E - enabled; A - auto-generated;
+			               R - reboot required to activate
+            "
+        ::= { wlsxLicenseEntry 5 }
+
+     licenseService OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The service enabled by this license.
+            "
+        ::= { wlsxLicenseEntry 6 }
+
+-- Table lists all the processors and there corresponding Load.
+
+   wlsxSysXProcessorTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysXProcessorEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			The table of processors contained by the switch.
+		"
+      ::= { wlsxSystemXGroup 9 } 
+
+   wlsxSysXProcessorEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysXProcessorEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  "
+	  	An entry for one processor contained by the switch.
+	  "
+	  INDEX { sysXProcessorID}
+      ::= { wlsxSysXProcessorTable 1 } 
+
+   WlsxSysXProcessorEntry ::=
+     SEQUENCE {
+         sysXProcessorID		Integer32,
+         sysXProcessorDescr 	DisplayString,
+		 sysXProcessorLoad		Integer32
+     }
+
+   sysXProcessorID OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Processor Index.
+            "
+        ::= { wlsxSysXProcessorEntry 1 }
+
+   sysXProcessorDescr OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+			description of the processor.
+            "
+        ::= { wlsxSysXProcessorEntry 2 }
+
+   sysXProcessorLoad OBJECT-TYPE
+        SYNTAX       Integer32 (0..100)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			The average, over the last minute, of the percentage of
+			time that this processor was not idle.
+			"
+        ::= { wlsxSysXProcessorEntry 3 }
+
+-- Table contains all the storage devices in the switch and there 
+-- utilization numbers.
+
+   wlsxSysXStorageTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysXStorageEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The table of Storage-devices contained by the switch.
+		"
+	
+      ::= { wlsxSystemXGroup 10 } 
+
+   wlsxSysXStorageEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysXStorageEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 	An entry for one long-term storage device contained by the 
+				switch.
+			 "
+	  INDEX { sysXStorageIndex }
+      ::= { wlsxSysXStorageTable 1 } 
+
+   WlsxSysXStorageEntry ::=
+     SEQUENCE {
+        sysXStorageIndex	Integer32,
+        sysXStorageType 	INTEGER,
+	 	sysXStorageSize		Integer32,
+	 	sysXStorageUsed		Integer32,
+	 	sysXStorageName		DisplayString
+   }
+
+   sysXStorageIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+            "
+        ::= { wlsxSysXStorageEntry 1 }
+
+   sysXStorageType OBJECT-TYPE
+        SYNTAX      INTEGER {
+					ram(1),
+					flashMemory(2)
+		  	    }
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            "
+        ::= { wlsxSysXStorageEntry 2 }
+
+   sysXStorageSize OBJECT-TYPE
+        SYNTAX      Integer32
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		size of the storage filesystem in MB.
+            "
+        ::= { wlsxSysXStorageEntry 3 }
+
+   sysXStorageUsed OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		size of the storage filesystem in MB.
+            "
+        ::= { wlsxSysXStorageEntry 4 }
+
+   sysXStorageName OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+			name of the storage filesystem.
+            "
+        ::= { wlsxSysXStorageEntry 5 }
+
+-- This table describes the memory utilization of the switch
+
+   wlsxSysXMemoryTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysXMemoryEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The memory status of the switch
+		"
+	
+      ::= { wlsxSystemXGroup 11 } 
+
+   wlsxSysXMemoryEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysXMemoryEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+		An entry for one memory region on the switch.  Currently,
+		only the CP region is monitored.
+	     "
+	  INDEX { sysXMemoryIndex }
+      ::= { wlsxSysXMemoryTable 1 } 
+
+   WlsxSysXMemoryEntry ::=
+     SEQUENCE {
+         sysXMemoryIndex	Integer32,
+	 	sysXMemorySize	Integer32,
+	 	sysXMemoryUsed	Integer32,
+	 	sysXMemoryFree	Integer32
+   }
+
+   sysXMemoryIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+            "
+        ::= { wlsxSysXMemoryEntry 1 }
+
+   sysXMemorySize OBJECT-TYPE
+        SYNTAX      Integer32
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		Total memory in KB.
+            "
+        ::= { wlsxSysXMemoryEntry 2 }
+
+   sysXMemoryUsed OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		Used memory in KB.
+            "
+        ::= { wlsxSysXMemoryEntry 3 }
+
+   sysXMemoryFree OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		Free memory in KB.
+            "
+        ::= { wlsxSysXMemoryEntry 4 }
+
+   wlsxSwitchLicenseSerialNumber OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 The license serial number of the switch
+			"
+        ::= { wlsxSystemXGroup 12 }
+
+   wlsxSwitchIpv6 OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..128))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "Switch IPv6 as configured by the user. This IPv6 address uniquely
+            identifies the switch."
+        ::= { wlsxSystemXGroup 13 }
+
+   wlsxSwitchMasterIpv6 OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..45))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+             Master IPv6 address of the switch
+            "
+        ::= { wlsxSystemXGroup 14 }
+
+-- wlsxUserInfoGroup contains information about the users connected to the switch.
+
+   wlsxSwitchUserTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchUserEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the users (both wired and wireless) currently
+			connected to the switch. Users are identified by their IP address.
+		"
+	
+      ::= { wlsxUserInfoGroup 1 } 
+
+     wlsxSwitchUserEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchUserEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "User Entry"
+	  INDEX { userIpAddress}
+      ::= { wlsxSwitchUserTable 1 } 
+
+     MxSwitchUserEntry ::=
+     SEQUENCE {
+         userIpAddress				IpAddress,
+         userPhyAddress 			MacAddress,
+		 userName					DisplayString,
+		 userRole					DisplayString,
+		 userUpTime					TimeTicks,
+		 userAuthenticationMethod	INTEGER,
+		 userLocation				DisplayString,
+		 userServerName				DisplayString,
+		 userConnectedVlan			Integer32,
+		 userConnectedSlot			Integer32,
+		 userConnectedPort			Integer32,
+		 userBWContractName			DisplayString,
+		 userBWContractUsage		INTEGER,
+		 userConnectedModule		INTEGER
+
+     }
+
+     userIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			IP Address from which the user connected to the switch.
+            "
+        ::= { wlsxSwitchUserEntry 1 }
+
+     userPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Physical Address of the station from which the user connected to 
+			the switch.
+            "
+        ::= { wlsxSwitchUserEntry 2 }
+
+     userName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Name of the User.
+            "
+        ::= { wlsxSwitchUserEntry 3 }
+
+     userRole OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Role configured for this user.
+            "
+        ::= { wlsxSwitchUserEntry 4 }
+
+		 
+     userUpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Time since the user is connected to the switch.	
+            "
+        ::= { wlsxSwitchUserEntry 5 }
+
+     userAuthenticationMethod OBJECT-TYPE
+         SYNTAX       INTEGER {
+						none(1),
+						other(2),
+						web(3),
+						dot1x(4),
+						vpn(5),
+						mac(6)
+						}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Authentication mechanism used by the user to connect to the switch.
+            "
+        ::= { wlsxSwitchUserEntry 6 }
+
+     userLocation OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the access point (in Building.Floor.... format), which
+			the user used to connect to the switch.
+            "
+        ::= { wlsxSwitchUserEntry 7 }
+
+     userServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Back-end authentication server, used to authenticate
+			the user.
+            "
+        ::= { wlsxSwitchUserEntry 8 }
+
+     userConnectedVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Vlan on which the user is connected to the switch.
+            "
+        ::= { wlsxSwitchUserEntry 9 }
+
+     userConnectedSlot OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Slot on switch, where the user connection terminates.
+            "
+        ::= { wlsxSwitchUserEntry 10 }
+
+     userConnectedPort OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port on switch, where the user connection terminates.
+            "
+        ::= { wlsxSwitchUserEntry 11 }
+
+     userBWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxSwitchUserEntry 12 }
+
+     userBWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the Bandwidth Contract is used.
+            "
+        ::= { wlsxSwitchUserEntry 13 }
+
+     userConnectedModule OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The module to which the user is connected, if wired.
+            "
+        ::= { wlsxSwitchUserEntry 14 }
+
+
+  -- StationMgmt Table
+  --Station Management Table contains all the station associated with this AP.
+
+   wlsxSwitchStationMgmtTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchStationMgmtEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the wireless stations associated with the 
+			Access points connected to this switch. 
+		"
+	
+      ::= { wlsxUserInfoGroup 2 } 
+
+   wlsxSwitchStationMgmtEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchStationMgmtEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {staPhyAddress, staAccessPointBSSID}
+      ::= { wlsxSwitchStationMgmtTable 1 } 
+
+   MxSwitchStationMgmtEntry ::=
+     SEQUENCE {
+         staPhyAddress				MacAddress,
+		 staAccessPointBSSID		MacAddress,
+		 staUserName				DisplayString,
+		 staUserRole				DisplayString,
+		 staAssociationID			Unsigned32,
+		 staAccessPointESSID		DisplayString,
+		 staSignalToNoiseRatio		Integer32,
+		 staTransmitRate			INTEGER,
+		 staReceiveRate				INTEGER
+   }
+
+   	staPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The Physical Address of the Station.
+            "
+        ::= { wlsxSwitchStationMgmtEntry 1 }
+
+	staAccessPointBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the Access point through which the station is connected
+			to the switch
+            "
+        ::= { wlsxSwitchStationMgmtEntry 2 }
+
+	staUserName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the User connecting from this station.
+            "
+        ::= { wlsxSwitchStationMgmtEntry 3 }
+
+	staUserRole OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			User Role.
+            "
+        ::= { wlsxSwitchStationMgmtEntry 4 }
+
+	staAssociationID OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AID with which the Station is associated with this system.
+            "
+        ::= { wlsxSwitchStationMgmtEntry 5 }
+
+	staAccessPointESSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the Access point
+            "
+        ::= { wlsxSwitchStationMgmtEntry 6 }
+
+   	staSignalToNoiseRatio OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			SNR for the BSSID.
+            "
+        ::= { wlsxSwitchStationMgmtEntry 7 }
+
+   	staTransmitRate OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				rate1Mbps(1),
+						rate2Mbps(2),
+						rate5point5Mbps(3),
+						rate6Mbps(4),
+						rate9Mbps(5),
+						rate11Mbps(6),
+						rate12Mbps(7),
+						rate18Mbps(8),
+						rate24Mbps(9),
+						rate36Mbps(10),
+						rate48Mbps(11),
+						rate54Mbps(12)
+		 			  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates Transmit rate of the channel
+            "
+        ::= { wlsxSwitchStationMgmtEntry 8 }
+
+   	staReceiveRate OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				rate1Mbps(1),
+						rate2Mbps(2),
+						rate5point5Mbps(3),
+						rate6Mbps(4),
+						rate9Mbps(5),
+						rate11Mbps(6),
+						rate12Mbps(7),
+						rate18Mbps(8),
+						rate24Mbps(9),
+						rate36Mbps(10),
+						rate48Mbps(11),
+						rate54Mbps(12)
+		 			  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates Receive rate of the channel
+            "
+        ::= { wlsxSwitchStationMgmtEntry 9 }
+
+
+  -- StationStats Table
+  --Station Statistics Table contains a summary of statistics collected by the
+  --switch. The stats are indexed by Station Mac and AP BSSID it is associated
+  --to.
+
+   wlsxSwitchStationStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchStationStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists the statistics of all the wireless stations 
+			associated with the Access points connected to this switch. 
+		"
+	
+      ::= { wlsxUserInfoGroup 3 } 
+
+   wlsxSwitchStationStatsEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchStationStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Statistics Entry"
+	  INDEX {staPhyAddress, staAccessPointBSSID}
+      ::= { wlsxSwitchStationStatsTable 1 } 
+
+   MxSwitchStationStatsEntry ::=
+     SEQUENCE {
+		 staTxPackets				Counter32,
+		 staTxBytes				Counter32,
+		 staRxPackets				Counter32,
+		 staRxBytes				Counter32,
+		 staBwRate				Integer32,
+		 staFrameRetryRate		Integer32,
+		 staFrameLowSpeedRate		Integer32,
+		 staFrameNonUnicastRate		Integer32,
+		 staFrameFragmentationRate		Integer32,
+		 staFrameReceiveErrorRate		Integer32
+     }
+
+   	staTxPackets OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Packets Transmitted by the station.
+            "
+        ::= { wlsxSwitchStationStatsEntry 1 }
+
+   	staTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Bytes Transmitted by the station.
+			"
+        ::= { wlsxSwitchStationStatsEntry 2 }
+
+   	staRxPackets OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Packets Received by the Station
+            "
+        ::= { wlsxSwitchStationStatsEntry 3 }
+
+   	staRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Bytes Received by the station.
+            "
+        ::= { wlsxSwitchStationStatsEntry 4 }
+
+   	staBwRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Bandwidth Rate in Kbps of the station.
+            "
+        ::= { wlsxSwitchStationStatsEntry 5 }
+
+   	staFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Retry Rate.
+            "
+        ::= { wlsxSwitchStationStatsEntry 6 }
+
+   	staFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Low Speed Rate.
+            "
+        ::= { wlsxSwitchStationStatsEntry 7 }
+
+   	staFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Non Unicast Packet Rate.
+            "
+        ::= { wlsxSwitchStationStatsEntry 8 }
+
+   	staFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Fragmentation Rate.
+            "
+        ::= { wlsxSwitchStationStatsEntry 9 }
+
+   	staFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Station Frame Receive Error Rate.
+            "
+        ::= { wlsxSwitchStationStatsEntry 10 }
+
+-- wlsxAccessPointInfoGroup contains a Local Access Point Information Table.
+-- which lists all the AP's connected to this switch, a Global AP Info Table
+-- which lists all the AP's in the Domain. The Global table is valid only
+-- on the Master switch. The Group also contains two scalar objects which 
+-- indicate the total number of AP's and the total number of Clients connected.
+
+
+   wlsxSwitchTotalNumAccessPoints  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of Access Points Connected to this switch.
+            "
+        ::= { wlsxAccessPointInfoGroup 1 }
+
+   wlsxSwitchTotalNumStationsAssociated  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of Stations Associated to this switch.
+            "
+        ::= { wlsxAccessPointInfoGroup 2 }
+
+-- Local Access Point Table.
+
+   wlsxSwitchAccessPointTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchAccessPointEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the Access Points Connected to this switch. 
+		"
+      ::= { wlsxAccessPointInfoGroup 3 } 
+
+   wlsxSwitchAccessPointEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchAccessPointEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {apBSSID}
+      ::= { wlsxSwitchAccessPointTable 1 } 
+
+   MxSwitchAccessPointEntry ::=
+     SEQUENCE {
+         apBSSID				MacAddress,
+		 apESSID				DisplayString,
+		 apSlot					Unsigned32,
+		 apPort					Unsigned32,
+		 apIpAddress			IpAddress,
+		 apPhyType				INTEGER,
+		 apType					INTEGER,
+		 apCurrentChannel		INTEGER,
+		 apLocation				DisplayString,
+		 apTotalTime			TimeTicks,
+		 apInactiveTime			TimeTicks,
+		 apLoadBalancing		TruthValue,
+		 apChannelNoise			Integer32,
+		 apSignalToNoiseRatio	Integer32,
+		 apTransmitRate			INTEGER,
+		 apReceiveRate			INTEGER
+   }
+
+   	apBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The Physical Address of the Access Point.
+            "
+        ::= { wlsxSwitchAccessPointEntry 1 }
+
+   	apESSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the Access Point
+            "
+        ::= { wlsxSwitchAccessPointEntry 2 }
+
+   	apSlot OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Slot to which the Access Point is connected.
+            "
+        ::= { wlsxSwitchAccessPointEntry 3 }
+
+   	apPort OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port to which the Access Point is connected.
+            "
+        ::= { wlsxSwitchAccessPointEntry 4 }
+
+   	apIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Address of the Access Point.
+            "
+        ::= { wlsxSwitchAccessPointEntry 5 }
+
+   	apPhyType OBJECT-TYPE
+         SYNTAX       INTEGER{
+						dot11a(1),
+						dot11b(2),
+						dot11g(3)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Physical Layer Protocol support of the AP.
+            "
+        ::= { wlsxSwitchAccessPointEntry 6 }
+
+   	apType OBJECT-TYPE
+         SYNTAX       INTEGER{
+						ap(1),
+						am(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether the Access point is an Air Monitor or regular AP.
+            "
+        ::= { wlsxSwitchAccessPointEntry 7 }
+
+   	apCurrentChannel OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Current Operating frequency channel.
+            "
+        ::= { wlsxSwitchAccessPointEntry 8 }
+
+   	apLocation OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the AP defined in Building.Floor.... mode.
+            "
+        ::= { wlsxSwitchAccessPointEntry 9 }
+
+   	apTotalTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time since the Ap is connected to the switch 
+            "
+        ::= { wlsxSwitchAccessPointEntry 10 }
+
+   	apInactiveTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Time since the Ap has been inactive 
+            "
+        ::= { wlsxSwitchAccessPointEntry 11 }
+
+   	apLoadBalancing OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether Load balancing is enabled or not.
+            "
+        ::= { wlsxSwitchAccessPointEntry 12 }
+
+   	apChannelNoise OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the noise on the channel
+            "
+        ::= { wlsxSwitchAccessPointEntry 13 }
+
+   	apSignalToNoiseRatio OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			SNR for the BSSID.
+            "
+        ::= { wlsxSwitchAccessPointEntry 14 }
+
+   	apTransmitRate OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				rate1Mbps(1),
+						rate2Mbps(2),
+						rate5point5Mbps(3),
+						rate6Mbps(4),
+						rate9Mbps(5),
+						rate11Mbps(6),
+						rate12Mbps(7),
+						rate18Mbps(8),
+						rate24Mbps(9),
+						rate36Mbps(10),
+						rate48Mbps(11),
+						rate54Mbps(12)
+		 			  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates Transmit rate of the channel
+            "
+        ::= { wlsxSwitchAccessPointEntry 15 }
+
+   	apReceiveRate OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				rate1Mbps(1),
+						rate2Mbps(2),
+						rate5point5Mbps(3),
+						rate6Mbps(4),
+						rate9Mbps(5),
+						rate11Mbps(6),
+						rate12Mbps(7),
+						rate18Mbps(8),
+						rate24Mbps(9),
+						rate36Mbps(10),
+						rate48Mbps(11),
+						rate54Mbps(12)
+		 			  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates Receive rate of the channel
+            "
+        ::= { wlsxSwitchAccessPointEntry 16 }
+
+
+ --Global AP Table
+   wlsxSwitchGlobalAPTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchGlobalAPEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       deprecated 
+      DESCRIPTION 
+	  	"
+			This Table lists all the Access Points Connected in the 
+			Switch Domain. This table is valid only on a
+			Master switch. On a Local switch, the table is empty.
+		"
+      ::= { wlsxAccessPointInfoGroup 4 } 
+
+   wlsxSwitchGlobalAPEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchGlobalAPEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       deprecated 
+      DESCRIPTION 
+             "Station Management Entry"
+	  INDEX {globalAPLocation, globalAPAddress}
+      ::= { wlsxSwitchGlobalAPTable 1 } 
+
+   MxSwitchGlobalAPEntry ::=
+     SEQUENCE {
+         globalAPLocation		DisplayString,
+		 globalAPAddress		IpAddress,
+		 globalAPLocalSwitch	IpAddress,
+		 globalAPdot11aPhyAddr	MacAddress,
+		 globalAPdot11bPhyAddr	MacAddress,
+		 globalAPState			INTEGER,
+		 globalAPdot11gPhyAddr	MacAddress
+   }
+
+   	globalAPLocation OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   not-accessible
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Physical Location of the AP, defined in Building.Floor.Location
+			format.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 1 }
+
+   	globalAPAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   not-accessible
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Address of the Access Point.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 2 }
+
+   	globalAPLocalSwitch OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			IP Address of the Local Switch this Access Point is connected to.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 3 }
+
+   	globalAPdot11aPhyAddr OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Physical Mac address of the module supporting dot11a in the
+			Access Point. AP can have support for both dot11a and dot11b 
+			physical layer.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 4 }
+
+   	globalAPdot11bPhyAddr OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Physical Mac address of the module supporting dot11b in the
+			Access Point. AP can have support for both dot11a and dot11b 
+			physical layer.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 5 }
+
+   	globalAPState OBJECT-TYPE
+         SYNTAX       INTEGER(1..7)
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			State of the AP.
+			1 -- AP is UP.
+			2 -- AP is DOWN.
+			3-7 -- Values are deprecated.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 6 }
+
+   	globalAPdot11gPhyAddr OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Physical Mac address of the module supporting dot11g in the
+			Access Point. AP can have support for both a,b,g 
+			physical layer.
+            "
+        ::= { wlsxSwitchGlobalAPEntry 7 }
+
+ -- Local AP Stats.
+
+   wlsxSwitchAccessPointStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchAccessPointStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists the statistics of all the Access Points Connected 
+			to this switch. 
+		"
+      ::= { wlsxAccessPointInfoGroup 5 } 
+
+   wlsxSwitchAccessPointStatsEntry OBJECT-TYPE 
+	  SYNTAX       MxSwitchAccessPointStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 Ap Stats Entry.
+			 "
+	  INDEX {apBSSID}
+      ::= { wlsxSwitchAccessPointStatsTable 1 } 
+
+   MxSwitchAccessPointStatsEntry ::=
+     SEQUENCE {
+		 apStatsChannel						INTEGER,
+		 apChannelBwRate					Integer32,
+		 apChannelFrameRetryRate			Integer32,
+		 apChannelFrameLowSpeedRate			Integer32,
+		 apChannelFrameNonUnicastRate		Integer32,
+		 apChannelFrameFragmentationRate	Integer32,
+		 apChannelFrameReceiveErrorRate		Integer32,
+		 apBSSTxPackets						Counter32,
+		 apBSSTxBytes						Counter32,
+		 apBSSRxPackets						Counter32,
+		 apBSSRxBytes						Counter32,
+		 apBSSBwRate						Integer32,
+		 apBSSFrameRetryRate				Integer32,
+		 apBSSFrameLowSpeedRate				Integer32,
+		 apBSSFrameNonUnicastRate			Integer32,
+		 apBSSFrameFragmentationRate		Integer32,
+		 apBSSFrameReceiveErrorRate			Integer32
+   }
+
+   	apStatsChannel OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Channel on which the ap is operating.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 1 }
+
+
+   	apChannelBwRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Bandwidth Rate in Kbps of the apChannel.
+            "
+        ::= {  wlsxSwitchAccessPointStatsEntry 2 }
+
+   	apChannelFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Ap Channel Frame Retry Rate.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 3 }
+
+   	apChannelFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Ap Channel Frame Low Speed Rate.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 4 }
+
+   	apChannelFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Ap Channel Frame Non Unicast Packet Rate.
+            "
+        ::= {wlsxSwitchAccessPointStatsEntry 5 }
+
+   	apChannelFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Ap Channel Frame Fragmentation Rate.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry  6 }
+
+   	apChannelFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Ap Channel Frame Receive Error Rate.
+            "
+        ::= {  wlsxSwitchAccessPointStatsEntry 7 }
+
+   	apBSSTxPackets OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Packets Transmitted by the ap on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 8 }
+
+   	apBSSTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Bytes Transmitted by the ap on this BSSID.
+			"
+        ::= { wlsxSwitchAccessPointStatsEntry 9 }
+
+   	apBSSRxPackets OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Packets Received by the ap on this BSSID
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry  10 }
+
+   	apBSSRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Bytes Received by the ap on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 11 }
+
+   	apBSSBwRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Bandwidth Rate in Kbps of the ap on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 12 }
+
+   	apBSSFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Retry Rate on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 13 }
+
+   	apBSSFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Low Speed Rate on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 14 }
+
+   	apBSSFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Non Unicast Packet Rate on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 15 }
+
+   	apBSSFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Fragmentation Rate on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 16 }
+
+   	apBSSFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Frame Receive Error Rate on this BSSID.
+            "
+        ::= { wlsxSwitchAccessPointStatsEntry 17 }
+
+-- New wlsxInstantAccessPointInfoGroup contains the information related to IAPs.
+-- This table is valid only, when queried from the controller.
+
+	wlsxIapTotalNumBranches  OBJECT-TYPE
+		SYNTAX       Integer32
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Total number of branches in IAP"
+		::= { wlsxInstantAccessPointInfoGroup 1 }
+
+	wlsxIapTotalNumBranchesUp  OBJECT-TYPE
+		SYNTAX       Integer32
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Total number of branches with status Up."
+		::= { wlsxInstantAccessPointInfoGroup 2 }
+
+	wlsxIapTotalNumBranchesDown  OBJECT-TYPE
+		SYNTAX       Integer32
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Total number of branches with status Down"
+		::= { wlsxInstantAccessPointInfoGroup 3 }
+
+-- IAP Table
+
+	wlsxIapBranchTable  OBJECT-TYPE
+		SYNTAX       SEQUENCE OF IapBranchListEntry
+		MAX-ACCESS   not-accessible
+		STATUS       current
+		DESCRIPTION
+			"
+				This table lists all the information related to IAP branches.
+			"
+		::= { wlsxInstantAccessPointInfoGroup 4 }
+	wlsxIapBranchEntry OBJECT-TYPE
+		SYNTAX       IapBranchListEntry
+		MAX-ACCESS   not-accessible
+		STATUS       current
+		DESCRIPTION
+			"IAP branch entry"
+		INDEX {iapBranchKey}
+		::= { wlsxIapBranchTable 1 }
+
+	IapBranchListEntry ::=
+		SEQUENCE {
+			iapBranchKey                          DisplayString,
+			iapBranchName                         DisplayString,
+			iapBranchVcMacAddress                 MacAddress,
+			iapBranchStatus                       INTEGER,
+			iapBranchInnerIpAddressType           INTEGER,
+			iapBranchInnerIpAddress               DisplayString,
+			iapBranchAssignedSubnet               DisplayString,
+			iapBranchAssignedVlan                 OCTET STRING
+		}
+
+	iapBranchKey OBJECT-TYPE
+		SYNTAX       DisplayString(SIZE(65))
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Key of the IAP branch."
+		::= { wlsxIapBranchEntry 1 }
+
+	iapBranchName OBJECT-TYPE
+		SYNTAX       DisplayString(SIZE(0..129))
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			" Name of the IAP branch."
+		::= { wlsxIapBranchEntry 2 }
+
+	iapBranchVcMacAddress OBJECT-TYPE
+		SYNTAX       MacAddress
+		MAX-ACCESS   not-accessible
+		STATUS       current
+		DESCRIPTION
+			"MAC address of the Virtual Controller of the branch."
+		::= { wlsxIapBranchEntry 3 }
+
+	iapBranchStatus OBJECT-TYPE
+		SYNTAX      INTEGER {
+					up(1),
+					down(2)
+					}
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Current status of the branch"
+		::= { wlsxIapBranchEntry 4 }
+
+	iapBranchInnerIpAddressType OBJECT-TYPE
+		SYNTAX      INTEGER {
+					ipv4(1),
+					ipv6(2)
+					}
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Inner IP Address type IPv4 or IPv6 of the branch."
+		::= { wlsxIapBranchEntry 5 }
+
+	iapBranchInnerIpAddress OBJECT-TYPE
+		SYNTAX       DisplayString(SIZE(0..45))
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Inner IPv4/IPv6 Address of the branch."
+		::= { wlsxIapBranchEntry 6 }
+
+	iapBranchAssignedSubnet OBJECT-TYPE
+		SYNTAX       DisplayString
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"Assigned subnets of the branch."
+		::= { wlsxIapBranchEntry 7 }
+
+	iapBranchAssignedVlan OBJECT-TYPE
+		SYNTAX       OCTET STRING
+		MAX-ACCESS   read-only
+		STATUS       current
+		DESCRIPTION
+			"
+				Assigned vlans of the branch.
+				A string of octets containing one bit per VLAN for a
+				total of 4096 VLANs in the management domain.
+				The most significant bit of the octet string is the
+				lowest value VLAN of 4096 VLANs.
+				By setting the bit(1) we indicate that the vlan is part of the
+				assigned vlans.
+				The most significant bit of the bitmap is transmitted
+				first. Note that if the length of this string is less than
+				512 octets, any 'missing' octets are assumed to contain
+				the value zero.
+			"
+		::= { wlsxIapBranchEntry 8 }
+
+-- wlsxSwitchTraps
+-- This group defines all the traps related to the switch platform. 
+wlsxSwitchTrapObjectsGroup      OBJECT IDENTIFIER ::= { wlsxSwitchTraps 100 }
+
+wlsxAuthServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the 
+				Authentication Server, used for Authentication.
+            "
+::= { wlsxSwitchTrapObjectsGroup 1 }
+
+
+wlsxAuthServerTimeout OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the 
+				Authentication Server Timeout.
+            "
+::= { wlsxSwitchTrapObjectsGroup 2 }
+
+wlsxFanNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate 
+				a failing fan number.
+            "
+::= { wlsxSwitchTrapObjectsGroup 4 }
+
+
+wlsxLineCardNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate a 
+				Line Card in the switch.
+            "
+::= { wlsxSwitchTrapObjectsGroup 5 }
+
+
+wlsxVoltageType OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the 
+				type of the voltage.
+            "
+::= { wlsxSwitchTrapObjectsGroup 6 }
+
+
+wlsxVoltageValue OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..10))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate the 
+				voltage value in Float.
+            "
+::= { wlsxSwitchTrapObjectsGroup 7 }
+
+
+wlsxTemperatureValue OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate 
+				Temperature Value.
+            "
+::= { wlsxSwitchTrapObjectsGroup 8 }
+
+
+wlsxProcessName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate a 
+				process name.
+            "
+::= { wlsxSwitchTrapObjectsGroup 9 }
+
+wlsxStationMacAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Physical Address of the Station.
+            "
+::= { wlsxSwitchTrapObjectsGroup 10 }
+
+wlsxStationBlackListReason OBJECT-TYPE
+         SYNTAX       INTEGER {
+		 				userDefined(1),
+						mitmAttack(2),
+						authFailure(3),
+						pingFlood(4),
+						sessionFlood(5),
+						synFlood(6),
+						sessionBlacklist(7),
+						ipSpoofing(8),
+						other(100)
+		 			  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Reason for which a station is black listed. 
+            "
+::= { wlsxSwitchTrapObjectsGroup 11 }
+
+wlsxSpoofedIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify a Spoofed IP Address.
+            "
+::= { wlsxSwitchTrapObjectsGroup 12 }
+
+wlsxSpoofedOldPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify a Old Mac Address.
+            "
+::= { wlsxSwitchTrapObjectsGroup 13 }
+
+wlsxSpoofedNewPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify a New Mac Address.
+            "
+::= { wlsxSwitchTrapObjectsGroup 14 }
+
+wlsxDBName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify name of the Database.
+            "
+::= { wlsxSwitchTrapObjectsGroup 15 }
+
+wlsxDBUserName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify name of the Database user.
+            "
+::= { wlsxSwitchTrapObjectsGroup 16 }
+
+wlsxDBIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify the IpAddress of the DB.
+            "
+::= { wlsxSwitchTrapObjectsGroup 17 }
+
+wlsxDBType OBJECT-TYPE
+         SYNTAX       INTEGER{
+		 				mssql(1),
+						mysql(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object is used in a trap to identify the Port of the user.
+            "
+::= { wlsxSwitchTrapObjectsGroup 18 }
+
+wlsxVrID OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object contains the Virtual Router Identifier.
+            "
+::= { wlsxSwitchTrapObjectsGroup 19 }
+
+wlsxVrMasterIp OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object contains the Master IP address.
+            "
+::= { wlsxSwitchTrapObjectsGroup 20 }
+
+wlsxVrrpOperState OBJECT-TYPE
+         SYNTAX       INTEGER {
+						initialize(1),
+						backup(2),
+		 				master(3)
+					  }
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object represents the VRRP operational state.
+            "
+::= { wlsxSwitchTrapObjectsGroup 21 }
+
+wlsxApTxPower OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object contains the value of the AP Transmit Power.
+            "
+::= { wlsxSwitchTrapObjectsGroup 22 }
+
+wlsxESIServerGrpName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object represents the External Services Interface 
+			(ESI) Server Group name
+            "
+::= { wlsxSwitchTrapObjectsGroup 23 }
+
+
+wlsxESIServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object represents the External Services Interface
+			(ESI) Server name
+            "
+::= { wlsxSwitchTrapObjectsGroup 24 }
+
+wlsxESIServerIpaddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object represents the External Services Interface 
+			(ESI) Server 
+			IP Address
+            "
+::= { wlsxSwitchTrapObjectsGroup 25 }
+
+wlsxLicenseDaysRemaining OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Object represents number of the days remaining prior
+			to a license expiry
+            "
+::= { wlsxSwitchTrapObjectsGroup 26 }
+
+wlsxSlotNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+				This Object is used in the traps to indicate a 
+				Line Card in the switch.  This value matches the value
+				of sysExtCardSlot.
+            "
+::= { wlsxSwitchTrapObjectsGroup 27 }
+
+wlsxStationBlackListReasonStr OBJECT-TYPE
+        SYNTAX          DisplayString(SIZE(0..32))
+        MAX-ACCESS      accessible-for-notify
+        STATUS          current
+        DESCRIPTION
+                    "
+            This object is used in the traps to indicate the
+            type of Blacklist reason.
+                                "
+::= { wlsxSwitchTrapObjectsGroup 28 }
+
+-- Trap Definitions.
+
+wlsxSwitchIPChanged NOTIFICATION-TYPE        
+	OBJECTS {wlsxSwitchIp}
+    STATUS  current
+    DESCRIPTION
+			"A trap which indicates that the switch IP address has changed." 
+    ::= { wlsxSwitchTraps 1001 }
+
+wlsxSwitchRoleChange NOTIFICATION-TYPE        
+	OBJECTS {wlsxSwitchRole}
+    STATUS  current
+    DESCRIPTION
+			"A trap which indicates that the role of the switch has changed in 
+			the Domain."
+    ::= { wlsxSwitchTraps 1002 }
+
+-- Authentication Traps.
+wlsxUserEntryCreated NOTIFICATION-TYPE        
+	OBJECTS {userPhyAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a New user is created.
+			"
+    ::= { wlsxSwitchTraps 1003 }
+
+wlsxUserEntryDeleted NOTIFICATION-TYPE        
+	OBJECTS {userPhyAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a user is deleted.
+			"
+    ::= { wlsxSwitchTraps 1004 }
+
+
+wlsxUserEntryAuthenticated NOTIFICATION-TYPE        
+	OBJECTS {userPhyAddress, userName, userAuthenticationMethod, userRole}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a user is Authenticated.
+			"
+    ::= { wlsxSwitchTraps 1005 }
+
+
+wlsxUserEntryDeAuthenticated NOTIFICATION-TYPE        
+	OBJECTS {userPhyAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a user is Deauthenticated.
+			"
+    ::= { wlsxSwitchTraps 1006 }
+
+
+wlsxUserAuthenticationFailed NOTIFICATION-TYPE        
+	OBJECTS {userPhyAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a user authentication has failed.
+			"
+    ::= { wlsxSwitchTraps 1007 }
+
+
+wlsxAuthServerReqTimedOut NOTIFICATION-TYPE        
+	OBJECTS {wlsxAuthServerName}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the authentication server request 
+			timed out.
+			"
+    ::= { wlsxSwitchTraps 1008 }
+
+wlsxAuthServerTimedOut NOTIFICATION-TYPE        
+	OBJECTS {wlsxAuthServerName, wlsxAuthServerTimeout}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the authentication server 
+			timed out.
+			"
+    ::= { wlsxSwitchTraps 1009 }
+
+wlsxAuthServerIsUp NOTIFICATION-TYPE        
+	OBJECTS {wlsxAuthServerName}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the authentication server is up.
+			"
+    ::= { wlsxSwitchTraps 1010 }
+
+wlsxAuthMaxUserEntries NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the User Entries table is full and
+			cannot add any more entries.
+			"
+    ::= { wlsxSwitchTraps 1011 }
+
+wlsxAuthMaxAclEntries NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the Acl Entries table is full and
+			cannot add any more entries.
+			"
+    ::= { wlsxSwitchTraps 1012 }
+
+wlsxAuthMaxBWContracts NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the switch reached the maximum number of
+			configurable Bandwidth contracts.
+			"
+    ::= { wlsxSwitchTraps 1013 }
+
+-- Platform Traps.
+
+wlsxPowerSupplyFailure NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the power supply has failed.
+			"
+    ::= { wlsxSwitchTraps 1014 }
+
+wlsxFanFailure NOTIFICATION-TYPE        
+	OBJECTS {wlsxFanNumber}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the fan has failed.
+			"
+    ::= { wlsxSwitchTraps 1015 }
+
+wlsxOutOfRangeVoltage NOTIFICATION-TYPE        
+	OBJECTS {wlsxVoltageType, wlsxVoltageValue}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the switch received out of range 
+			voltage.
+			"
+    ::= { wlsxSwitchTraps 1016 }
+
+wlsxOutOfRangeTemperature NOTIFICATION-TYPE        
+	OBJECTS {wlsxTemperatureValue}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the Temperature is out of bounds.
+			"
+    ::= { wlsxSwitchTraps 1017 }
+
+
+wlsxLCInserted NOTIFICATION-TYPE        
+	OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a Line card is inserted.
+			"
+    ::= { wlsxSwitchTraps 1018 }
+
+wlsxSCInserted NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a supervisory card is inserted.
+			"
+    ::= { wlsxSwitchTraps 1019 }
+
+wlsxGBICInserted NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a GBIC is inserted in a line card. 
+			"
+    ::= { wlsxSwitchTraps 1020 }
+
+wlsxProcessDied NOTIFICATION-TYPE        
+	OBJECTS {wlsxProcessName}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a process has died.
+			"
+    ::= { wlsxSwitchTraps 1021 }
+
+wlsxProcessExceedsMemoryLimits NOTIFICATION-TYPE        
+	OBJECTS {wlsxProcessName}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a process is consuming large
+			amounts of memory.
+			"
+    ::= { wlsxSwitchTraps 1022 }
+
+wlsxLowOnFlashSpace NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the switch is running low on flash space.
+			"
+    ::= { wlsxSwitchTraps 1023 }
+
+wlsxLowMemory NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the system free memory is low.
+			"
+    ::= { wlsxSwitchTraps 1024 }
+
+wlsxFanTrayRemoved NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the fan tray is removed.
+			"
+    ::= { wlsxSwitchTraps 1025 }
+
+wlsxFanTrayInserted NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the fan tray is removed.
+			"
+    ::= { wlsxSwitchTraps 1026 }
+
+wlsxLCRemoved NOTIFICATION-TYPE        
+	OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a Line card is removed.
+			"
+    ::= { wlsxSwitchTraps 1027 }
+
+wlsxSCRemoved NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a supervisory card is removed.
+			"
+    ::= { wlsxSwitchTraps 1028 }
+
+wlsxPowerSupplyMissing NOTIFICATION-TYPE        
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that the power supply is missing.
+			"
+    ::= { wlsxSwitchTraps 1029 }
+
+-- Access point up/down traps.
+
+wlsxAccessPointIsUp NOTIFICATION-TYPE        
+	OBJECTS {apLocation, apIpAddress}
+    STATUS  deprecated
+    DESCRIPTION
+			"
+			A trap which indicates that an Access point at Location 
+			apLocation and Address apIpAddress is up.
+			"
+    ::= { wlsxSwitchTraps 1030 }
+
+wlsxAccessPointIsDown NOTIFICATION-TYPE        
+	OBJECTS {apLocation, apIpAddress}
+    STATUS  deprecated
+    DESCRIPTION
+			"
+			A trap which indicates that an Access point at Location 
+			apLocation and Address apIpAddress is down.
+			"
+    ::= { wlsxSwitchTraps 1031}
+
+
+wlsxCoverageHoleDetected NOTIFICATION-TYPE        
+	OBJECTS {apLocation, apIpAddress, wlsxStationMacAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that an Access point at Location
+			apLocation and Address apIpAddress has detected a Coverage Hole.
+			"
+    ::= { wlsxSwitchTraps 1032}
+
+
+wlsxChannelChanged NOTIFICATION-TYPE        
+	OBJECTS {apLocation, apIpAddress, apCurrentChannel}
+    STATUS  deprecated
+    DESCRIPTION
+			"
+			A trap which indicates that an Access point at Location 
+			apLocation and Address apIpAddress has changed the channel to 
+			apCurrentChannel.
+			"
+    ::= { wlsxSwitchTraps 1033}
+
+wlsxStationAddedToBlackList NOTIFICATION-TYPE        
+	OBJECTS {wlsxStationMacAddress, wlsxStationBlackListReason, wlsxStationBlackListReasonStr}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a station with address
+			wlsxStationMacAddress is black listed for 
+			wlsxStationBlackListReason reason.
+			"
+    ::= { wlsxSwitchTraps 1034}
+
+wlsxStationRemovedFromBlackList NOTIFICATION-TYPE        
+	OBJECTS {wlsxStationMacAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a station with address
+			wlsxStationMacAddress is removed from black list.
+			"
+    ::= { wlsxSwitchTraps 1035}
+
+wlsxIpSpoofingDetected NOTIFICATION-TYPE        
+	OBJECTS {wlsxSpoofedIpAddress, wlsxSpoofedOldPhyAddress, wlsxSpoofedNewPhyAddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap indicating that the switch detected IP Spoofing.
+			"
+    ::= { wlsxSwitchTraps 1036}
+
+wlsxDBCommunicationFailure NOTIFICATION-TYPE        
+	OBJECTS {wlsxDBName, wlsxDBUserName, wlsxDBIpAddress, wlsxDBType}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap to indicate that communication with Database failed.
+			"
+    ::= { wlsxSwitchTraps 1037}
+
+wlsxVrrpStateChange NOTIFICATION-TYPE        
+	OBJECTS {wlsxVrID, wlsxVrMasterIp, wlsxVrrpOperState}
+    STATUS  current
+    DESCRIPTION
+			"
+				A trap which indicates that VRRP State has changed on the switch.
+			"
+    ::= { wlsxSwitchTraps 1038}
+
+wlsxAPRadioAttributesChanged NOTIFICATION-TYPE        
+	OBJECTS {apLocation, apIpAddress, apCurrentChannel, wlsxApTxPower}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates changes in the Radio attributes of an 
+			Access Point at location apLocation and address apIpAddress.
+			Ap channel is apCurrentChannel, and Transmit power is 
+			apTxPower.
+			"
+    ::= { wlsxSwitchTraps 1039}
+
+wlsxESIServerUp NOTIFICATION-TYPE        
+	OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a ESI server <wlsxESIServerName> in 
+			group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up
+			"
+    ::= { wlsxSwitchTraps 1040}
+
+wlsxESIServerDown NOTIFICATION-TYPE        
+	OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that a ESI server <wlsxESIServerName> in 
+			group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down
+			"
+    ::= { wlsxSwitchTraps 1041}
+
+wlsxLicenseExpiry NOTIFICATION-TYPE        
+	OBJECTS {wlsxLicenseDaysRemaining}
+    STATUS  current
+    DESCRIPTION
+			"
+			A trap which indicates that one or more licenses on the
+			switch will expire in <wlsxLicenseDaysRemaining> days
+			"
+    ::= { wlsxSwitchTraps 1042}
+
+wlsxAceUsageThreshold NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+                       "
+                       A trap which indicates that the Acl Entries table has reached
+                       eighty percent of the maximum limit.
+                       "
+    ::= { wlsxSwitchTraps 1043 }
+
+wlsxFanAbsent NOTIFICATION-TYPE
+       OBJECTS {wlsxFanNumber}
+    STATUS  current
+    DESCRIPTION
+                       "
+                       A trap which indicates that the fan is absent.
+                       "
+    ::= { wlsxSwitchTraps 1044 }
+
+wlsxWebCCLicenseEnforcement NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+                       "
+                       A trap which indicates that the WebCC license enforcement has
+                       been triggered.
+                       "
+    ::= { wlsxSwitchTraps 1045 }
+
+wlsxLowOnFlash1Space NOTIFICATION-TYPE
+   STATUS  current
+   DESCRIPTION
+                     "
+                     A trap which indicates that the switch is running low on flash1 space.
+                     "
+   ::= { wlsxSwitchTraps 1046 }
+
+wlsxSwitchIPv6Changed NOTIFICATION-TYPE
+        OBJECTS {wlsxSwitchIpv6}
+    STATUS  current
+    DESCRIPTION
+                        "A trap which indicates that the switch IPv6 address has changed."
+    ::= { wlsxSwitchTraps 1047 }
+
+wlsxDot1xThresholdLimitHit NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+                        "A Trap which indicates that the controller is running on high optimum limit."
+    ::= { wlsxSwitchTraps 1048 }
+
+wlsxDot1xTotalLimitHit NOTIFICATION-TYPE
+    STATUS  current
+    DESCRIPTION
+                        " A Trap which indicates that the controller is running on full optimum limit."
+    ::= { wlsxSwitchTraps 1049 }
+
+
+END
+
+
diff --git a/MIBS/arubaos/WLSX-SYSTEMEXT-MIB b/MIBS/arubaos/WLSX-SYSTEMEXT-MIB
new file mode 100644
index 0000000..1e91a24
--- /dev/null
+++ b/MIBS/arubaos/WLSX-SYSTEMEXT-MIB
@@ -0,0 +1,1314 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-SYSTEMEXT-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+	   Counter32,
+	   IpAddress,
+	   TimeTicks,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+	   ArubaSwitchRole,
+       ArubaActiveState,
+       ArubaCardType
+	   		FROM ARUBA-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+	wlsxEnterpriseMibModules
+           FROM ARUBA-MIB;
+
+   wlsxSystemExtMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            System level information about the Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 2 }
+
+   wlsxSystemExtGroup       OBJECT IDENTIFIER ::= { wlsxSystemExtMIB 1 }
+   wlsxSystemExtTableGenNumberGroup OBJECT IDENTIFIER ::= { wlsxSystemExtMIB 2 }
+
+   -- wlsxSystemExtGroup contains objects to describe a controller.
+
+   wlsxSysExtSwitchIp OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Controller IP as configured by the user. This IP address uniquely 
+			identifies the controller."
+        ::= { wlsxSystemExtGroup 1 }
+
+   wlsxSysExtHostname OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..32))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Name of the controller."
+        ::= { wlsxSystemExtGroup 2 }
+
+   wlsxSysExtModelName OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..32))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Model Name of the controller."
+        ::= { wlsxSystemExtGroup 3 }
+
+   wlsxSysExtSwitchRole OBJECT-TYPE
+        SYNTAX      ArubaSwitchRole
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"Role of this controller in the Aruba Domain."
+        ::= { wlsxSystemExtGroup 4 }
+
+   wlsxSysExtSwitchMasterIp OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 Switch IP of the master controller.
+			"
+        ::= { wlsxSystemExtGroup 5 }
+
+   wlsxSysExtSwitchDate OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+			"
+			System notion of the local date and time of day.
+			"
+        ::= { wlsxSystemExtGroup 6 }
+
+   wlsxSysExtSwitchBaseMacaddress OBJECT-TYPE
+        SYNTAX       MacAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			The Base MAC address of the controller.
+			"
+        ::= { wlsxSystemExtGroup 7 }
+
+   wlsxSysExtFanTrayAssemblyNumber OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			Assembly number of the Fan tray.
+			"
+        ::= { wlsxSystemExtGroup 8 }
+
+   wlsxSysExtFanTraySerialNumber OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			Serial number of the Fan tray
+			"
+        ::= { wlsxSystemExtGroup 9 }
+
+   wlsxSysExtInternalTemparature OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			Internal temperature in the controller.
+			"
+        ::= { wlsxSystemExtGroup 10 }
+
+   wlsxSysExtLicenseSerialNumber OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			The license serial number of the controller.
+			"
+        ::= { wlsxSystemExtGroup 11 }
+         
+   wlsxSysExtSwitchLicenseCount OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 The number of licenses installed on the controller
+			"
+        ::= { wlsxSystemExtGroup 12 }
+
+ -- Table lists all the processors and their corresponding Load.
+
+   wlsxSysExtProcessorTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtProcessorEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			The table of processors contained by the controller.
+		"
+	
+      ::= { wlsxSystemExtGroup 13 } 
+
+   wlsxSysExtProcessorEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtProcessorEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  "
+	  	An entry for one processor contained by the controller.
+	  "
+	  INDEX { sysExtProcessorID}
+      ::= { wlsxSysExtProcessorTable 1 } 
+
+   WlsxSysExtProcessorEntry ::=
+     SEQUENCE {
+         sysExtProcessorID		Integer32,
+         sysExtProcessorDescr 	DisplayString,
+		 sysExtProcessorLoad	Integer32
+     }
+
+   sysExtProcessorID OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Processor Index.
+            "
+        ::= { wlsxSysExtProcessorEntry 1 }
+
+   sysExtProcessorDescr OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+			Description of the processor.
+            "
+        ::= { wlsxSysExtProcessorEntry 2 }
+
+   sysExtProcessorLoad OBJECT-TYPE
+        SYNTAX       Integer32 (0..100)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			The average, over the last minute, of the percentage of
+			time that this processor was not idle.
+			"
+        ::= { wlsxSysExtProcessorEntry 3 }
+
+   -- Table contains all the storage devices in the controller and their
+   -- utilization numbers.
+
+   wlsxSysExtStorageTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtStorageEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The table of Storage-devices contained by the controller.
+		"
+	
+      ::= { wlsxSystemExtGroup 14 } 
+
+   wlsxSysExtStorageEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtStorageEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 	An entry for one long-term storage device contained by the 
+				controller.
+			 "
+	  INDEX { sysExtStorageIndex }
+      ::= { wlsxSysExtStorageTable 1 } 
+
+   WlsxSysExtStorageEntry ::=
+     SEQUENCE {
+         sysExtStorageIndex		Integer32,
+         sysExtStorageType 		INTEGER,
+		 sysExtStorageSize		Integer32,
+		 sysExtStorageUsed		Integer32,
+		 sysExtStorageName		DisplayString
+   }
+
+   sysExtStorageIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Index into the table.
+            "
+        ::= { wlsxSysExtStorageEntry 1 }
+
+   sysExtStorageType OBJECT-TYPE
+        SYNTAX      INTEGER {
+						ram(1),
+						flashMemory(2)
+					}
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Type of the storage.
+            "
+        ::= { wlsxSysExtStorageEntry 2 }
+
+   sysExtStorageSize OBJECT-TYPE
+        SYNTAX      Integer32
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total size of the storage filesystem in MB.
+            "
+        ::= { wlsxSysExtStorageEntry 3 }
+
+   sysExtStorageUsed OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Used Storage in MB.
+            "
+        ::= { wlsxSysExtStorageEntry 4 }
+
+   sysExtStorageName OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the storage filesystem.
+            "
+        ::= { wlsxSysExtStorageEntry 5 }
+
+-- This table describes the memory utilization of the controller
+
+   wlsxSysExtMemoryTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtMemoryEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The memory status of the controller
+		"
+	
+      ::= { wlsxSystemExtGroup 15 } 
+
+   wlsxSysExtMemoryEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtMemoryEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+		An entry for one memory region on the controller.  Currently,
+		only the control processor memory is monitored.
+	     "
+	  INDEX { sysExtMemoryIndex }
+      ::= { wlsxSysExtMemoryTable 1 } 
+
+   WlsxSysExtMemoryEntry ::=
+     SEQUENCE {
+     sysExtMemoryIndex	Integer32,
+	 sysExtMemorySize	Integer32,
+	 sysExtMemoryUsed	Integer32,
+	 sysExtMemoryFree	Integer32
+   }
+
+   sysExtMemoryIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Index into the table.
+            "
+        ::= { wlsxSysExtMemoryEntry 1 }
+
+   sysExtMemorySize OBJECT-TYPE
+        SYNTAX      Integer32
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		Total memory in KB.
+            "
+        ::= { wlsxSysExtMemoryEntry 2 }
+
+   sysExtMemoryUsed OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		Used memory in KB.
+            "
+        ::= { wlsxSysExtMemoryEntry 3 }
+
+   sysExtMemoryFree OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+	    		Free memory in KB.
+            "
+        ::= { wlsxSysExtMemoryEntry 4 }
+
+-- This table lists the different Hardware Modules in the controller.
+
+   wlsxSysExtCardTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtCardEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The table of Hardware modules in the controller.
+		"
+	
+      ::= { wlsxSystemExtGroup 16 } 
+
+   wlsxSysExtCardEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtCardEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 	An entry for one Hardware Module in the controller.
+			 "
+	  INDEX { sysExtCardSlot }
+      ::= { wlsxSysExtCardTable 1 } 
+
+   WlsxSysExtCardEntry ::=
+     SEQUENCE {
+		 sysExtCardSlot						Integer32,
+         sysExtCardType 					ArubaCardType,
+		 sysExtCardNumOfPorts				Integer32,
+		 sysExtCardNumOfFastethernetPorts	Integer32,
+		 sysExtCardNumOfGigPorts			Integer32,
+		 sysExtCardSerialNo					DisplayString,
+		 sysExtCardAssemblyNo				DisplayString,
+		 sysExtCardManufacturingDate		DisplayString,
+		 sysExtCardHwRevision				DisplayString,
+		 sysExtCardFpgaRevision				DisplayString,
+		 sysExtCardSwitchChip				DisplayString,
+		 sysExtCardStatus					ArubaActiveState,
+		 sysExtCardUserSlot					Integer32,
+		 sysExtCardServiceTag				DisplayString,
+		 sysExtCardPartNumber				DisplayString
+   }
+
+   sysExtCardSlot OBJECT-TYPE
+         SYNTAX      Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Slot in which this card is located, offset by one.  For the user-visible
+			slot number see sysExtCardUserSlot
+            "
+        ::= { wlsxSysExtCardEntry 1 }
+
+   sysExtCardType OBJECT-TYPE
+         SYNTAX      ArubaCardType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Type of the Card.
+            "
+        ::= { wlsxSysExtCardEntry 2 }
+
+   sysExtCardNumOfPorts OBJECT-TYPE
+         SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+		    Number of data ports on the card.	
+            "
+        ::= { wlsxSysExtCardEntry 3 }
+
+   sysExtCardNumOfFastethernetPorts OBJECT-TYPE
+        SYNTAX      Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of Fastethernet ports on the card.
+            "
+        ::= { wlsxSysExtCardEntry 4 }
+
+   sysExtCardNumOfGigPorts OBJECT-TYPE
+        SYNTAX      Integer32
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of Gigabit ethernet ports on the card.
+            "
+        ::= { wlsxSysExtCardEntry 5 }
+
+   sysExtCardSerialNo OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Serial number of the card.
+            "
+        ::= { wlsxSysExtCardEntry 6 }
+
+   sysExtCardAssemblyNo OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Assembly Number of the card.
+            "
+        ::= { wlsxSysExtCardEntry 7 }
+
+   sysExtCardManufacturingDate OBJECT-TYPE
+        SYNTAX      DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Card manufacturing date.
+            "
+        ::= { wlsxSysExtCardEntry 8 }
+
+   sysExtCardHwRevision OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Hardware revision of the card.
+            "
+        ::= { wlsxSysExtCardEntry 9 }
+
+   sysExtCardFpgaRevision OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Fpga revision number.
+            "
+        ::= { wlsxSysExtCardEntry 10 }
+
+   sysExtCardSwitchChip OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Switching Chip version.
+            "
+        ::= { wlsxSysExtCardEntry 11 }
+
+   sysExtCardStatus OBJECT-TYPE
+        SYNTAX      ArubaActiveState
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Status of the card.
+            "
+        ::= { wlsxSysExtCardEntry 12 }
+
+   sysExtCardUserSlot OBJECT-TYPE
+        SYNTAX      Integer32
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			User-visible (zero-based) slot number.
+            "
+        ::= { wlsxSysExtCardEntry 13 }
+
+   sysExtCardServiceTag OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Service Tag of the card.
+            "
+        ::= { wlsxSysExtCardEntry 14 }
+
+   sysExtCardPartNumber OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Service Tag of the card.
+            "
+        ::= { wlsxSysExtCardEntry 15 }
+
+-- This table lists the Fans in the controller.
+
+   wlsxSysExtFanTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtFanEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The table of all supported fans in the controller. Not supported in Aruba 200/800 and 2400 controllers.
+		"
+	
+      ::= { wlsxSystemExtGroup 17 } 
+
+   wlsxSysExtFanEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtFanEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 	An entry for one fan.
+			 "
+	  INDEX { sysExtFanIndex }
+      ::= { wlsxSysExtFanTable 1 } 
+
+   WlsxSysExtFanEntry ::=
+     SEQUENCE {
+         sysExtFanIndex			Integer32,
+		 sysExtFanStatus		ArubaActiveState
+   }
+
+   sysExtFanIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Index into the table.
+            "
+        ::= { wlsxSysExtFanEntry 1 }
+
+   sysExtFanStatus OBJECT-TYPE
+         SYNTAX      ArubaActiveState
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Status of the Fan.
+            "
+        ::= { wlsxSysExtFanEntry 2 }
+
+-- This table lists the Power supplies in the controller.
+
+   wlsxSysExtPowerSupplyTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtPowerSupplyEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+		"
+		The table of all supported Power supplies in the controller. Not supported in Aruba 200, 800 and 2400 controllers.
+		"
+	
+      ::= { wlsxSystemExtGroup 18 } 
+
+   wlsxSysExtPowerSupplyEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtPowerSupplyEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "
+			 An entry for one power supply.
+			 "
+	  INDEX { sysExtPowerSupplyIndex }
+      ::= { wlsxSysExtPowerSupplyTable 1 } 
+
+   WlsxSysExtPowerSupplyEntry ::=
+     SEQUENCE {
+         sysExtPowerSupplyIndex			Integer32,
+		 sysExtPowerSupplyStatus		ArubaActiveState
+   }
+
+   sysExtPowerSupplyIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Index into the table.
+            "
+        ::= { wlsxSysExtPowerSupplyEntry 1 }
+
+   sysExtPowerSupplyStatus OBJECT-TYPE
+         SYNTAX      ArubaActiveState
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Status of the power supply.
+            "
+        ::= { wlsxSysExtPowerSupplyEntry 2 }
+
+-- Switch List Table contains all the controllers in the domain. This table is 
+-- valid only, when queried from the master controller.
+
+   wlsxSysExtSwitchListTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtSwitchListEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS      current 
+      DESCRIPTION 
+	  	"This Table will list all the controllers in the Aruba Domain.
+		 It will be populated only on the master controller. Local controllers
+		 return empty table.
+		"
+	
+      ::= { wlsxSystemExtGroup 19 } 
+
+     wlsxSysExtSwitchListEntry OBJECT-TYPE 
+	  SYNTAX       WlsxSysExtSwitchListEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS      current 
+      DESCRIPTION 
+             "Switch List Entry"
+	  INDEX { sysExtSwitchIPAddress}
+      ::= { wlsxSysExtSwitchListTable 1 } 
+
+     WlsxSysExtSwitchListEntry ::=
+     SEQUENCE {
+         sysExtSwitchIPAddress	IpAddress,
+         sysExtSwitchRole 		ArubaSwitchRole,
+		 sysExtSwitchLocation	DisplayString,
+		 sysExtSwitchSWVersion	DisplayString,
+		 sysExtSwitchStatus		ArubaActiveState,
+		 sysExtSwitchName		DisplayString,
+		 sysExtSwitchSerNo      DisplayString
+     }
+
+     sysExtSwitchIPAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current 
+         DESCRIPTION
+            "
+			IP Address of the controller.
+            "
+        ::= { wlsxSysExtSwitchListEntry 1 }
+
+     sysExtSwitchRole OBJECT-TYPE
+        SYNTAX      ArubaSwitchRole
+         MAX-ACCESS   read-only
+         STATUS       current 
+         DESCRIPTION
+            "
+			 Role of the controller.
+            "
+        ::= { wlsxSysExtSwitchListEntry 2 }
+
+     sysExtSwitchLocation OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS      current 
+         DESCRIPTION
+            "
+			Location of the controller
+            "
+        ::= { wlsxSysExtSwitchListEntry 3 }
+
+     sysExtSwitchSWVersion OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS     current 
+         DESCRIPTION
+            "
+			Software version the controller is running.
+            "
+        ::= { wlsxSysExtSwitchListEntry 4 }
+
+     sysExtSwitchStatus OBJECT-TYPE
+        SYNTAX      ArubaActiveState
+         MAX-ACCESS   read-only
+         STATUS      current 
+         DESCRIPTION
+            "
+			Status of the controller.
+            "
+        ::= { wlsxSysExtSwitchListEntry 5 }
+
+     sysExtSwitchName OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..128))
+         MAX-ACCESS   read-only
+         STATUS      current 
+         DESCRIPTION
+            "
+			Host name of the controller.
+            "
+        ::= { wlsxSysExtSwitchListEntry 6 }
+
+     sysExtSwitchSerNo OBJECT-TYPE
+        SYNTAX      DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS      current 
+         DESCRIPTION
+            "
+			Serial number of the controller.
+            "
+        ::= { wlsxSysExtSwitchListEntry 7 }
+
+-- The license table lists all valid licenses installed on the controller
+
+   wlsxSysExtSwitchLicenseTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxSysExtLicenseEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"This table lists all licenses installed on the controller.
+		"
+	
+      ::= { wlsxSystemExtGroup 20 } 
+
+     wlsxSysExtLicenseEntry OBJECT-TYPE 
+	 	SYNTAX      WlsxSysExtLicenseEntry
+	 	MAX-ACCESS   not-accessible		
+     	STATUS       current 
+     	DESCRIPTION 
+             "License Entry"
+	  	INDEX { sysExtLicenseIndex }
+      ::= { wlsxSysExtSwitchLicenseTable 1 } 
+
+     WlsxSysExtLicenseEntry ::=
+     SEQUENCE {
+     	 sysExtLicenseIndex         Integer32,
+         sysExtLicenseKey			DisplayString,
+         sysExtLicenseInstalled		DisplayString,
+         sysExtLicenseExpires		DisplayString,
+         sysExtLicenseFlags			DisplayString,
+         sysExtLicenseService 		DisplayString
+     }
+
+     sysExtLicenseIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			License ID number
+            "
+        ::= { wlsxSysExtLicenseEntry 1 }
+
+     sysExtLicenseKey OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License Key
+            "
+        ::= { wlsxSysExtLicenseEntry 2 }
+
+     sysExtLicenseInstalled OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License installation time
+            "
+        ::= { wlsxSysExtLicenseEntry 3 }
+
+     sysExtLicenseExpires OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License expiry time
+            "
+        ::= { wlsxSysExtLicenseEntry 4 }
+
+     sysExtLicenseFlags OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			License flags; E - enabled; A - auto-generated;
+			               R - reboot required to activate
+            "
+        ::= { wlsxSysExtLicenseEntry 5 }
+
+     sysExtLicenseService OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The service enabled by this license.
+            "
+        ::= { wlsxSysExtLicenseEntry 6 }
+
+   wlsxSysExtMMSCompatLevel OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 Lists the compatibility level of this controller with the MMS
+			"
+        ::= { wlsxSystemExtGroup 21 }
+
+   wlsxSysExtMMSConfigID OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 This Object represents the value of the MMS Configuration ID in the controller.
+			"
+        ::= { wlsxSystemExtGroup 22 }
+
+   wlsxSysExtControllerConfigID OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 This Object represents the value of the Controller's Configuration ID.
+			"
+        ::= { wlsxSystemExtGroup 23 }
+
+   wlsxSysExtIsMMSConfigUpdateEnabled OBJECT-TYPE
+        SYNTAX       TruthValue
+        MAX-ACCESS   read-write
+        STATUS       current
+        DESCRIPTION
+			"
+			This objects indicates whether the controller is configured to accept configuration snapshots from MMS.
+			"
+        ::= { wlsxSystemExtGroup 24 }
+
+   wlsxSysExtSwitchLastReload OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..128))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 The reason for the last controller reload
+			"
+        ::= { wlsxSystemExtGroup 25 }
+
+   wlsxSysExtLastStatsReset OBJECT-TYPE
+        SYNTAX       TimeTicks
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+			"
+			 Last time switch stats was reset
+			"
+        ::= { wlsxSystemExtGroup 26 }
+
+   wlsxSysExtHwVersion OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "Hardware version of the switch."
+        ::= { wlsxSystemExtGroup 27 }
+
+   wlsxSysExtSwVersion OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "Software version of the switch."
+        ::= { wlsxSystemExtGroup 28 }
+
+   wlsxSysExtSerialNumber OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "The serial number of the switch."
+        ::= { wlsxSystemExtGroup 29 }
+
+   wlsxSysExtCpuUsedPercent OBJECT-TYPE
+        SYNTAX       Gauge32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "The CPU used percent of the switch"
+        ::= { wlsxSystemExtGroup 30 }
+
+   wlsxSysExtMemoryUsedPercent OBJECT-TYPE
+        SYNTAX       Gauge32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "The memory used percent of the switch"
+        ::= { wlsxSystemExtGroup 31 }
+
+   wlsxSysExtPacketLossPercent OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "The packet loss count of the switch"
+        ::= { wlsxSystemExtGroup 32 }
+
+
+   wlsxSysExtUserTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This objects denotes the number of times the user table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 1 }
+
+   wlsxSysExtAPBssidTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This objects denotes the number of times the AP BSSID table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 2 }
+
+
+   wlsxSysExtAPRadioTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This objects denotes the number of times the Radio table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 3 }
+
+
+   wlsxSysExtAPTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated 
+        DESCRIPTION
+			"
+			This objects denotes the number of times the AP table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 4 }
+
+
+   wlsxSysExtSwitchListTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated 
+        DESCRIPTION
+			"
+			This objects denotes the number of times the Switch list table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 5 }
+
+
+   wlsxSysExtPortTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This objects denotes the number of times the port table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 6 }
+
+
+   wlsxSysExtVlanTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated 
+        DESCRIPTION
+			"
+			This objects denotes the number of times the Vlan table was 
+			modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 7 }
+
+
+   wlsxSysExtVlanInterfaceTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated 
+        DESCRIPTION
+			"
+			This objects denotes the number of times the Vlan Interface table 
+			was modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 8 }
+
+   wlsxSysExtLicenseTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated
+        DESCRIPTION
+			"
+			This objects denotes the number of times the license table
+			was modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 9 }
+
+   wlsxSysExtMonAPTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated 
+        DESCRIPTION
+			"
+			This objects denotes the number of times the monitored AP table
+			was modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 10 }
+
+   wlsxSysExtMonStationTableGenNumber OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       deprecated 
+        DESCRIPTION
+			"
+			This objects denotes the number of times the monitored station table
+			was modified since reboot.
+			"
+        ::= { wlsxSystemExtTableGenNumberGroup 11 }
+
+
+   wlsxSysExtPoweredViaPoe OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "Switch is powered using POE power."
+        ::= { wlsxSystemExtGroup 33 }
+
+   wlsxSysVMHostType OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION           
+                         "Host type is KVM/ HyperV/ VMware."
+        ::= { wlsxSystemExtGroup 34 }
+
+   wlsxSysExtProcessorModel OBJECT-TYPE
+        SYNTAX       DisplayString (SIZE(1..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION           
+                         "Processor Model Name."
+        ::= { wlsxSystemExtGroup 35 } 
+
+   wlsxSysExtTotalCpu OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "Total number of Control path and datapath CPUs
+                         in the controller."
+
+        ::= { wlsxSystemExtGroup 36 }
+
+   wlsxSysExtTotalSocket  OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                        "Total sockets present in the VM."
+
+        ::= { wlsxSystemExtGroup 37 }
+
+    wlsxAuthFailIp OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                  "This variable contains the last SNMP
+                   authorization failure IP address."
+        ::= { wlsxSystemExtGroup 38 }
+	
+    wlsxSysExtDiskSize  OBJECT-TYPE
+        SYNTAX       Integer32
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                  "Supervisor Card Flash Memory in MB."
+
+        ::= { wlsxSystemExtGroup 39 }
+
+-- New Switch List Table contains all the controllers in the domain. This table is 
+-- valid only, when queried from the master controller.
+
+   wlsxNSysExtSwitchListTable  OBJECT-TYPE 
+      SYNTAX       SEQUENCE OF WlsxNSysExtSwitchListEntry 
+      MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"This new Table will list all the controllers in the Aruba Domain.
+		 It will be populated only on the master controller. Local controllers
+		 return empty table. It is a common table for IPv4 and IPv6 Address of
+		 the controller.
+		"
+	
+      ::= { wlsxSystemExtGroup 40 } 
+
+     wlsxNSysExtSwitchListEntry OBJECT-TYPE 
+	  SYNTAX       WlsxNSysExtSwitchListEntry 
+	  MAX-ACCESS   not-accessible		
+          STATUS       current 
+          DESCRIPTION 
+             "New Switch List Entry"
+	  INDEX { sysExtNSwitchIPAddressType, sysExtNSwitchIPAddress}
+      ::= { wlsxNSysExtSwitchListTable 1 } 
+
+     WlsxNSysExtSwitchListEntry ::=
+     SEQUENCE {
+ 	 sysExtNSwitchIPAddressType     Integer32,
+         sysExtNSwitchIPAddress		DisplayString(SIZE(0..45)),
+         sysExtNSwitchRole 		ArubaSwitchRole,
+	 sysExtNSwitchLocation		DisplayString,
+	 sysExtNSwitchSWVersion		DisplayString,
+	 sysExtNSwitchStatus		ArubaActiveState,
+	 sysExtNSwitchName		DisplayString,
+	 sysExtNSwitchSerNo      	DisplayString
+     }
+
+     sysExtNSwitchIPAddressType OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Type of IP Address of the controller, either IPv4 / IPv6.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 1 }
+
+     sysExtNSwitchIPAddress OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..45))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			IPv4 or IPv6 Address of the controller.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 2 }
+
+     sysExtNSwitchRole OBJECT-TYPE
+         SYNTAX      ArubaSwitchRole
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Role of the controller.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 3 }
+
+     sysExtNSwitchLocation OBJECT-TYPE
+         SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the controller
+            "
+        ::= { wlsxNSysExtSwitchListEntry 4 }
+
+     sysExtNSwitchSWVersion OBJECT-TYPE
+         SYNTAX      DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Software version the controller is running.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 5 }
+
+     sysExtNSwitchStatus OBJECT-TYPE
+         SYNTAX      ArubaActiveState
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Status of the controller.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 6 }
+
+     sysExtNSwitchName OBJECT-TYPE
+         SYNTAX      DisplayString(SIZE(0..128))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Host name of the controller.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 7 }
+
+     sysExtNSwitchSerNo OBJECT-TYPE
+         SYNTAX      DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Serial number of the controller.
+            "
+        ::= { wlsxNSysExtSwitchListEntry 8 }
+
+END
+
diff --git a/MIBS/arubaos/WLSX-TRAP-MIB b/MIBS/arubaos/WLSX-TRAP-MIB
new file mode 100644
index 0000000..041d378
--- /dev/null
+++ b/MIBS/arubaos/WLSX-TRAP-MIB
@@ -0,0 +1,4831 @@
+--- ArubaOS 8.8.0.1_80393
+ WLSX-TRAP-MIB DEFINITIONS ::= BEGIN
+
+	IMPORTS
+		TEXTUAL-CONVENTION,
+		MODULE-IDENTITY,
+		OBJECT-TYPE,
+		snmpModules,
+		Integer32,
+		Counter32,
+		IpAddress,
+		NOTIFICATION-TYPE
+			FROM SNMPv2-SMI
+
+		TDomain,
+		DisplayString,
+		PhysAddress,
+		TAddress,
+		TimeInterval,
+		RowStatus,
+		StorageType,
+		TestAndIncr,
+		MacAddress,
+		DateAndTime,
+		TruthValue
+			FROM SNMPv2-TC
+
+		OBJECT-GROUP
+			FROM SNMPv2-CONF
+		wlsrEnterpriseMibModules
+			FROM ARUBA-MIB
+		ArubaFrameType,
+		ArubaAddressType,
+		ArubaEnableValue,
+		ArubaOperStateValue,
+		ArubaBlackListReason,
+		ArubaDBType,
+		ArubaVrrpState,
+		ArubaSwitchRole,
+		ArubaAuthenticationMethods,
+		ArubaConfigurationState,
+		ArubaConfigurationChangeType,
+		ArubaHTExtChannel,
+		ArubaAccessPointMode,
+		ArubaAccessPointMode,
+		ArubaARMChangeReason,
+		ArubaHTExtChannel,
+		ArubaConfigurationChangeType,
+		ArubaAPMasterStatus,
+		ArubaStationType,
+		ArubaThresholdResourceType,
+		ArubaStackState,
+		ArubaStackState,
+		ArubaStackChangeEvent,
+		ArubaStackIfTopoJoined,
+		InterfaceIndex,
+		ArubaIfState,
+		ArubaIfStateChangeReason,
+		ArubaAPUplinkType,
+		TimeTicks,
+		ArubaAPUplinkType,
+		ArubaAPUplinkChangeReason,
+		ArubaPortalServerDownReason
+			FROM ARUBA-TC;
+
+	wlsrTrapMIB MODULE-IDENTITY		LAST-UPDATED "2106011926Z"
+		ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+		CONTACT-INFO
+			"Postal:		3333 Scott Blvd,
+				       		Santa Clara, CA 95054
+			E-mail:     aruba-ext-eng-reg@hpe.com
+			Phone:      +1 408 227 4500"
+		DESCRIPTION
+			"This MIB defines the Traps generated by the switch.
+			"
+		REVISION        "2106011926Z"
+		DESCRIPTION
+			"The initial revision."
+		::= { wlsrEnterpriseMibModules 11 }
+
+-- wlsrTrapsGroup
+-- This group defines all the traps generated by the switch.
+
+	wlsxTrapsGroup         	OBJECT IDENTIFIER ::= { wlsrTrapMIB 1 }
+
+--Trap Object Group contains objects used in the traps.
+
+	wlsxTrapObjectsGroup         	OBJECT IDENTIFIER ::= { wlsxTrapsGroup 1 }
+
+--Trap Definitions Group contains Traps definitions.
+
+	wlsxTrapDefinitionsGroup      OBJECT IDENTIFIER ::= { wlsxTrapsGroup 2 }
+
+-- Definition of Objects used in the traps
+
+	wlsxTrapAPMacAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate 
+            the wired MAC address of an access point, for which the trap is being raised.
+        			"
+	::= {wlsxTrapObjectsGroup 1 }
+
+	wlsxTrapAPIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate 
+            the IP address of an access point, for which the trap is being raised.
+        			"
+	::= {wlsxTrapObjectsGroup 2 }
+
+	wlsxTrapAPBSSID OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the BSSID of the
+            access point, for which the trap is being raised.
+        			"
+	::= {wlsxTrapObjectsGroup 3 }
+
+	wlsxTrapEssid OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the SSID of the
+          access point, for which the trap is being raised.
+        			"
+	::= {wlsxTrapObjectsGroup 4 }
+
+	wlsxTrapTargetAPBSSID OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the BSSID of the
+            access point, for which we are raising the trap. If an
+            Air Monitor is sending the trap then this will indicate
+            AP. If an access point is sending the trap, then it will point
+            to itself.
+        			"
+	::= {wlsxTrapObjectsGroup 5 }
+
+	wlsxTrapTargetAPSSID OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the SSID of the
+          access point, for which the trap is being raised. If an
+          Air Monitor is sending the trap then this will indicate
+          AP. If an access point is sending the trap, then it will point
+          to itself.
+        			"
+	::= {wlsxTrapObjectsGroup 6 }
+
+	wlsxTrapTargetAPChannel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the channel of the
+          access point, for which the trap is being raised. If an
+          air monitor is sending the trap then this will indicate
+          AP. If an access point is sending the trap, then it will point
+          to itself.
+        			"
+	::= {wlsxTrapObjectsGroup 7 }
+
+	wlsxTrapNodeMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          a node.
+        			"
+	::= {wlsxTrapObjectsGroup 8 }
+
+	wlsxTrapSourceMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the source.
+        			"
+	::= {wlsxTrapObjectsGroup 9 }
+
+	wlsxReceiverMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the receiver.
+        			"
+	::= {wlsxTrapObjectsGroup 10 }
+
+	wlsxTrapTransmitterMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the transmitter.
+        			"
+	::= {wlsxTrapObjectsGroup 11 }
+
+	wlsxTrapReceiverMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the MAC address of
+          the receiver.
+        			"
+	::= {wlsxTrapObjectsGroup 12 }
+
+	wlsxTrapSnr OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Signal to Noise
+          ratio.
+        			"
+	::= {wlsxTrapObjectsGroup 13 }
+
+	wlsxTrapSignatureName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Signature Name.
+        			"
+	::= {wlsxTrapObjectsGroup 14 }
+
+	wlsxTrapFrameType OBJECT-TYPE
+		SYNTAX		ArubaFrameType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Frame Type
+        			"
+	::= {wlsxTrapObjectsGroup 15 }
+
+	wlsxTrapAddressType OBJECT-TYPE
+		SYNTAX		ArubaAddressType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Address type.
+        			"
+	::= {wlsxTrapObjectsGroup 16 }
+
+	wlsxTrapAPLocation OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Location of the AP.
+        			"
+	::= {wlsxTrapObjectsGroup 17 }
+
+	wlsxTrapAPChannel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Current Channel.
+        			"
+	::= {wlsxTrapObjectsGroup 18 }
+
+	wlsxTrapAPTxPower OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the AP Transmit Power.
+        			"
+	::= {wlsxTrapObjectsGroup 19 }
+
+	wlsxTrapMatchedMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the MAC address
+        			"
+	::= {wlsxTrapObjectsGroup 20 }
+
+	wlsxTrapMatchedIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the IP address
+        			"
+	::= {wlsxTrapObjectsGroup 21 }
+
+	wlsxTrapRogueIfoURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used to point to the WEBUI Rogue AP information URL.
+        			"
+	::= {wlsxTrapObjectsGroup 22 }
+
+	wlsxTrapVlanId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the VLAN Id.
+        			"
+	::= {wlsxTrapObjectsGroup 23 }
+
+	wlsxTrapAdminStatus OBJECT-TYPE
+		SYNTAX		ArubaEnableValue
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the admin status of
+            VLAN.
+        			"
+	::= {wlsxTrapObjectsGroup 24 }
+
+	wlsxTrapOperStatus OBJECT-TYPE
+		SYNTAX		ArubaOperStateValue
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the admin status of
+            VLAN.
+        			"
+	::= {wlsxTrapObjectsGroup 25 }
+
+	wlsxTrapAuthServerName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Authentication Server used for Authentication.
+        			"
+	::= {wlsxTrapObjectsGroup 26 }
+
+	wlsxTrapAuthServerTimeout OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Authentication Server Timeout.
+        			"
+	::= {wlsxTrapObjectsGroup 27 }
+
+	wlsxTrapCardSlot OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+           Slot in which this card is present.
+        			"
+	::= {wlsxTrapObjectsGroup 28 }
+
+	wlsxTrapTemperatureValue OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Temperature Value.
+        			"
+	::= {wlsxTrapObjectsGroup 29 }
+
+	wlsxTrapProcessName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Process name.
+        			"
+	::= {wlsxTrapObjectsGroup 30 }
+
+	wlsxTrapFanNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Fan Number.
+        			"
+	::= {wlsxTrapObjectsGroup 31 }
+
+	wlsxTrapVoltageType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            type of Voltage.
+        			"
+	::= {wlsxTrapObjectsGroup 32 }
+
+	wlsxTrapVoltageValue OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            voltage value in Float.
+        			"
+	::= {wlsxTrapObjectsGroup 33 }
+
+	wlsxTrapStationBlackListReason OBJECT-TYPE
+		SYNTAX		ArubaBlackListReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            The Reason for which a station is black listed.
+        			"
+	::= {wlsxTrapObjectsGroup 34 }
+
+	wlsxTrapSpoofedIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify a spoofed IP address.
+        			"
+	::= {wlsxTrapObjectsGroup 35 }
+
+	wlsxTrapSpoofedOldPhyAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify an old MAC address.
+        			"
+	::= {wlsxTrapObjectsGroup 36 }
+
+	wlsxTrapSpoofedNewPhyAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify a New MAC address.
+        			"
+	::= {wlsxTrapObjectsGroup 37 }
+
+	wlsxTrapDBName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify name of the database.
+        			"
+	::= {wlsxTrapObjectsGroup 38 }
+
+	wlsxTrapDBUserName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify name of the database user.
+        			"
+	::= {wlsxTrapObjectsGroup 39 }
+
+	wlsxTrapDBIpAddress OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify the IpAddress of the 
+            Database.
+        			"
+	::= {wlsxTrapObjectsGroup 40 }
+
+	wlsxTrapDBType OBJECT-TYPE
+		SYNTAX		ArubaDBType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in a trap to identify the port of the user.
+        			"
+	::= {wlsxTrapObjectsGroup 41 }
+
+	wlsxTrapVrrpID OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object contains the Virtual Router Identifier.
+        			"
+	::= {wlsxTrapObjectsGroup 42 }
+
+	wlsxTrapVrrpMasterIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object contains the Master IP address.
+        			"
+	::= {wlsxTrapObjectsGroup 43 }
+
+	wlsxTrapVrrpOperState OBJECT-TYPE
+		SYNTAX		ArubaVrrpState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the VRRP Operational state.
+        			"
+	::= {wlsxTrapObjectsGroup 44 }
+
+	wlsxTrapESIServerGrpName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the External Services Interface (ESI) Server
+            Group name
+        			"
+	::= {wlsxTrapObjectsGroup 45 }
+
+	wlsxTrapESIServerName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the External Services Interface (ESI) Server
+            Name
+        			"
+	::= {wlsxTrapObjectsGroup 46 }
+
+	wlsxTrapESIServerIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the External Services Interface (ESI) Server
+            IP address
+        			"
+	::= {wlsxTrapObjectsGroup 47 }
+
+	wlsxTrapLicenseDaysRemaining OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents number of the days remaining prior to a 
+            license expiry.
+        			"
+	::= {wlsxTrapObjectsGroup 48 }
+
+	wlsxTrapSwitchIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the controller IP address. 
+        			"
+	::= {wlsxTrapObjectsGroup 49 }
+
+	wlsxTrapSwitchRole OBJECT-TYPE
+		SYNTAX		ArubaSwitchRole
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Role of the controller. 
+        			"
+	::= {wlsxTrapObjectsGroup 50 }
+
+	wlsxTrapUserIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents IP address of the User.
+        			"
+	::= {wlsxTrapObjectsGroup 51 }
+
+	wlsxTrapUserPhyAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents MAC address of the User.
+        			"
+	::= {wlsxTrapObjectsGroup 52 }
+
+	wlsxTrapUserName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the user name.
+        			"
+	::= {wlsxTrapObjectsGroup 53 }
+
+	wlsxTrapUserRole OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Authentication method of the user.
+        			"
+	::= {wlsxTrapObjectsGroup 54 }
+
+	wlsxTrapUserAuthenticationMethod OBJECT-TYPE
+		SYNTAX		ArubaAuthenticationMethods
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Authentication method of the user.
+        			"
+	::= {wlsxTrapObjectsGroup 55 }
+
+	wlsxTrapAPRadioNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the radio number.
+        			"
+	::= {wlsxTrapObjectsGroup 56 }
+
+	wlsxTrapRogueInfoURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+			This object is used to point to the WEBGUI Rogue AP information 
+			URL.
+        			"
+	::= {wlsxTrapObjectsGroup 57 }
+
+	wlsxTrapInterferingAPInfoURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+			This object is used to point to the WEBGUI Rogue interfering 
+			AP information URL.
+        			"
+	::= {wlsxTrapObjectsGroup 58 }
+
+	wlsxTrapPortNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+           port number.
+        			"
+	::= {wlsxTrapObjectsGroup 59 }
+
+	wlsxTrapTime OBJECT-TYPE
+		SYNTAX		DateAndTime
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in all the enterprise traps to indicate the
+           the time when the trap is generated on the controller.
+        			"
+	::= {wlsxTrapObjectsGroup 60 }
+
+	wlsxTrapHostIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Trap host. 
+        			"
+	::= {wlsxTrapObjectsGroup 61 }
+
+	wlsxTrapHostPort OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Trap host port. 
+        			"
+	::= {wlsxTrapObjectsGroup 62 }
+
+	wlsxTrapConfigurationId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the ID of the configuration, to be used in traps.
+        			"
+	::= {wlsxTrapObjectsGroup 63 }
+
+	wlsxTrapCTSURL OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the URL from which the transfer should happen.
+        			"
+	::= {wlsxTrapObjectsGroup 64 }
+
+	wlsxTrapCTSTransferType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents  the transfer type, upload or download.
+        			"
+	::= {wlsxTrapObjectsGroup 65 }
+
+	wlsxTrapConfigurationState OBJECT-TYPE
+		SYNTAX		ArubaConfigurationState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents state of the configuration transfer.
+        			"
+	::= {wlsxTrapObjectsGroup 66 }
+
+	wlsxTrapUpdateFailureReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the reason for the update failure.
+        			"
+	::= {wlsxTrapObjectsGroup 67 }
+
+	wlsxTrapUpdateFailedObj OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This variable represents the AMAPI object which is the reason for the the update failure.
+        			"
+	::= {wlsxTrapObjectsGroup 68 }
+
+	wlsxTrapTableEntryChangeType OBJECT-TYPE
+		SYNTAX		ArubaConfigurationChangeType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents type of the configuration change. 
+        			"
+	::= {wlsxTrapObjectsGroup 69 }
+
+	wlsxTrapGlobalConfigObj OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This variable represents the AMAPI object corresponding to the global configuration change.
+        			"
+	::= {wlsxTrapObjectsGroup 70 }
+
+	wlsxTrapTableGenNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents generation number of a table. Used in the MMS, to keep track of the table content changes.
+        			"
+	::= {wlsxTrapObjectsGroup 71 }
+
+	wlsxTrapLicenseId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the license ID.
+        			"
+	::= {wlsxTrapObjectsGroup 72 }
+
+	wlsxTrapConfidenceLevel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the Confidence Level as a percentage
+        			"
+	::= {wlsxTrapObjectsGroup 73 }
+
+	wlsxTrapMissingLicenses OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This variable indicates any licenses that are not present during a configuration update
+        			"
+	::= {wlsxTrapObjectsGroup 74 }
+
+	wlsxVoiceCurrentNumCdr OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents  the number of CDRs in buffer.
+        			"
+	::= {wlsxTrapObjectsGroup 75 }
+
+	wlsxTrapTunnelId OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel ID.
+        			"
+	::= {wlsxTrapObjectsGroup 76 }
+
+	wlsxTrapTunnelStatus OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel Status.
+        			"
+	::= {wlsxTrapObjectsGroup 77 }
+
+	wlsxTrapTunnelUpReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel up reason.
+        			"
+	::= {wlsxTrapObjectsGroup 78 }
+
+	wlsxTrapTunnelDownReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the tunnel down reason.
+        			"
+	::= {wlsxTrapObjectsGroup 79 }
+
+	wlsxTrapApSerialNumber OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the AP Serial Number.
+        			"
+	::= {wlsxTrapObjectsGroup 80 }
+
+	wlsxTrapTimeStr OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the Time in String format.
+        			"
+	::= {wlsxTrapObjectsGroup 81 }
+
+	wlsxTrapMasterIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the master IP address. 
+        			"
+	::= {wlsxTrapObjectsGroup 82 }
+
+	wlsxTrapLocalIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Local IP address.
+        			"
+	::= {wlsxTrapObjectsGroup 83 }
+
+	wlsxTrapMasterName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the master controller name.
+        			"
+	::= {wlsxTrapObjectsGroup 84 }
+
+	wlsxTrapLocalName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the local controller name.
+        			"
+	::= {wlsxTrapObjectsGroup 85 }
+
+	wlsxTrapPrimaryControllerIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IP address of the AP's primary controller.
+        			"
+	::= {wlsxTrapObjectsGroup 86 }
+
+	wlsxTrapBackupControllerIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IP address of the AP's backup controller.
+        			"
+	::= {wlsxTrapObjectsGroup 87 }
+
+	wlsxTrapSpoofedFrameType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Spoofed Frame Type
+        			"
+	::= {wlsxTrapObjectsGroup 88 }
+
+	wlsxTrapAssociationType OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the type of association
+        			"
+	::= {wlsxTrapObjectsGroup 89 }
+
+	wlsxTrapDeviceIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IP address of a device seen by an AP.
+        			"
+	::= {wlsxTrapObjectsGroup 90 }
+
+	wlsxTrapDeviceMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the MAC address of a device seen by an AP.
+        			"
+	::= {wlsxTrapObjectsGroup 91 }
+
+	wlsxTrapVcIpAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Ip Address of a Voice client.
+        			"
+	::= {wlsxTrapObjectsGroup 92 }
+
+	wlsxTrapVcMacAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the MAC address of a Voice client.
+        			"
+	::= {wlsxTrapObjectsGroup 93 }
+
+	wlsxTrapAPName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Name of the AP.
+        			"
+	::= {wlsxTrapObjectsGroup 94 }
+
+	wlsxTrapApMode OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the AP Mode.
+        			"
+	::= {wlsxTrapObjectsGroup 95 }
+
+	wlsxTrapAPPrevChannel OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Previous Channel.
+        			"
+	::= {wlsxTrapObjectsGroup 96 }
+
+	wlsxTrapAPPrevChannelSec OBJECT-TYPE
+		SYNTAX		ArubaHTExtChannel
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Previous Secondary Channel.
+        			"
+	::= {wlsxTrapObjectsGroup 97 }
+
+	wlsxTrapAPPrevTxPower OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate previous AP Transmit Power.
+        			"
+	::= {wlsxTrapObjectsGroup 98 }
+
+	wlsxTrapAPCurMode OBJECT-TYPE
+		SYNTAX		ArubaAccessPointMode
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the APs Current Mode.
+        			"
+	::= {wlsxTrapObjectsGroup 99 }
+
+	wlsxTrapAPPrevMode OBJECT-TYPE
+		SYNTAX		ArubaAccessPointMode
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the APs Previous Mode.
+        			"
+	::= {wlsxTrapObjectsGroup 100 }
+
+	wlsxTrapAPARMChangeReason OBJECT-TYPE
+		SYNTAX		ArubaARMChangeReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This Object represents the APs Previous Mode.
+        			"
+	::= {wlsxTrapObjectsGroup 101 }
+
+	wlsxTrapAPChannelSec OBJECT-TYPE
+		SYNTAX		ArubaHTExtChannel
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object is used in the traps to indicate the Current Secondary Channel.
+        			"
+	::= {wlsxTrapObjectsGroup 102 }
+
+	wlsxTrapUserAttributeChangeType OBJECT-TYPE
+		SYNTAX		ArubaConfigurationChangeType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents type of the configuration change. 
+        			"
+	::= {wlsxTrapObjectsGroup 103 }
+
+	wlsxTrapApControllerIp OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            IP address of the controller to which the AP is
+            (or was most recently) registered.
+        			"
+	::= {wlsxTrapObjectsGroup 104 }
+
+	wlsxTrapApMasterStatus OBJECT-TYPE
+		SYNTAX		ArubaAPMasterStatus
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            Status of the AP as seen by the master when the status changes.
+        			"
+	::= {wlsxTrapObjectsGroup 105 }
+
+	wlsxTrapCaName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the name of the trustpoint.
+        			"
+	::= {wlsxTrapObjectsGroup 106 }
+
+	wlsxTrapCrlName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the name of the crl.
+        			"
+	::= {wlsxTrapObjectsGroup 107 }
+
+	wlsxTrapCount OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the number of occurrence of this trap.
+        			"
+	::= {wlsxTrapObjectsGroup 108 }
+
+	wlsxTrapPowerSupplyNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the power supply number.
+        			"
+	::= {wlsxTrapObjectsGroup 109 }
+
+	wlsxTrapFanTrayNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Fan Tray number.
+        			"
+	::= {wlsxTrapObjectsGroup 110 }
+
+	wlsxTrapClientClassification OBJECT-TYPE
+		SYNTAX		ArubaStationType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the classification of the client.
+        			"
+	::= {wlsxTrapObjectsGroup 111 }
+
+	wlsxThresholdResourceType OBJECT-TYPE
+		SYNTAX		ArubaThresholdResourceType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the Threshold alert's Resource Type .
+        			"
+	::= {wlsxTrapObjectsGroup 112 }
+
+	wlsxThresholdResourceName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+          This object represents the Threshold alert's Resource Name .
+        			"
+	::= {wlsxTrapObjectsGroup 113 }
+
+	wlsxThresholdValue OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Threshold alert's set threshold value.
+        			"
+	::= {wlsxTrapObjectsGroup 114 }
+
+	wlsxResourceValue OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the Threshold alert's actual value.
+        			"
+	::= {wlsxTrapObjectsGroup 115 }
+
+	wlsxStackPrevSlot OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the slot number of this stack element prior
+            to topology change in stack. A value of -1 indicates that this slot
+            was not in Active state of stack prior to topology change.
+        			"
+	::= {wlsxTrapObjectsGroup 116 }
+
+	wlsxStackCurrentSlot OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the slot number of this stack element after
+            the topology change in stack. A value of -1 indicates that this slot
+            is not in Active state of stack after the topology change.
+        			"
+	::= {wlsxTrapObjectsGroup 117 }
+
+	wlsxStackPrevState OBJECT-TYPE
+		SYNTAX		ArubaStackState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the state of this stack element prior to
+            topology change in stack.
+        			"
+	::= {wlsxTrapObjectsGroup 118 }
+
+	wlsxStackCurrentState OBJECT-TYPE
+		SYNTAX		ArubaStackState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the state of this stack element
+            after topology change in stack.
+        			"
+	::= {wlsxTrapObjectsGroup 119 }
+
+	wlsxStackChangeEvent OBJECT-TYPE
+		SYNTAX		ArubaStackChangeEvent
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the event which caused change in topology in
+            stack.
+        			"
+	::= {wlsxTrapObjectsGroup 120 }
+
+	wlsxStackProtoIfTopoJoined OBJECT-TYPE
+		SYNTAX		ArubaStackIfTopoJoined
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies whether an interface has joined the stacking
+            topology or left the topology.
+        			"
+	::= {wlsxTrapObjectsGroup 121 }
+
+	wlsxStackMemberMacAddress OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies mac-address of this stack element.
+        			"
+	::= {wlsxTrapObjectsGroup 122 }
+
+	wlsxStackMemberSlotNumber OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the slot number of this element in stack.
+        			"
+	::= {wlsxTrapObjectsGroup 123 }
+
+	wlsxStackIfName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the interface name which is part of stacking
+            link connected to other stacking element.
+        			"
+	::= {wlsxTrapObjectsGroup 124 }
+
+	wlsxTrapLicenseServerDaysRemaining OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents number of the days remaining prior to expiry 
+            of license limits sent by the server.
+        			"
+	::= {wlsxTrapObjectsGroup 125 }
+
+	wlsxTrapLicenseClientDaysRemaining OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents number of the days remaining prior to expiry 
+            of licenses contributed by a license client.
+        			"
+	::= {wlsxTrapObjectsGroup 126 }
+
+	wlsxIfIndex OBJECT-TYPE
+		SYNTAX		InterfaceIndex
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the ifIndex.
+        			"
+	::= {wlsxTrapObjectsGroup 127 }
+
+	wlsxIfState OBJECT-TYPE
+		SYNTAX		ArubaIfState
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the state of an interface.
+        			"
+	::= {wlsxTrapObjectsGroup 128 }
+
+	wlsxIfStateChangeReason OBJECT-TYPE
+		SYNTAX		ArubaIfStateChangeReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the reason for interface state change.
+        			"
+	::= {wlsxTrapObjectsGroup 129 }
+
+	wlsxTrapAPPreviousUplinkType OBJECT-TYPE
+		SYNTAX		ArubaAPUplinkType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the up link type for an AP.
+        			"
+	::= {wlsxTrapObjectsGroup 130 }
+
+	wlsxTrapAPPreviousUplinkActiveTime OBJECT-TYPE
+		SYNTAX		TimeTicks
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the up link type for an AP.
+        			"
+	::= {wlsxTrapObjectsGroup 131 }
+
+	wlsxTrapAPActiveUplinkType OBJECT-TYPE
+		SYNTAX		ArubaAPUplinkType
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the up link type for an AP.
+        			"
+	::= {wlsxTrapObjectsGroup 132 }
+
+	wlsxTrapAPUplinkChangeReason OBJECT-TYPE
+		SYNTAX		ArubaAPUplinkChangeReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the up link change reason.
+        			"
+	::= {wlsxTrapObjectsGroup 133 }
+
+	wlsxTrapExpiringCertName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the name of the certificate that is expiring in less than 60 days.
+        			"
+	::= {wlsxTrapObjectsGroup 134 }
+
+	wlsxTrapExpiredCertName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the name of the certificate that has expired.
+        			"
+	::= {wlsxTrapObjectsGroup 135 }
+
+	wlsxTrapHTMode OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+                This object represents HT Mode.
+            			"
+	::= {wlsxTrapObjectsGroup 136 }
+
+	wlsxTrapPhyType OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+                This object represents Physical Type.
+            			"
+	::= {wlsxTrapObjectsGroup 137 }
+
+	wlsxTrapAPManagedModeConfigFailure OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object indicates the error for the failure of config apply on IAP.
+        			"
+	::= {wlsxTrapObjectsGroup 138 }
+
+	wlsxTrapAuthServerAddress OBJECT-TYPE
+		SYNTAX		IpAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Authentication Server IP used for Authentication.
+        			"
+	::= {wlsxTrapObjectsGroup 139 }
+
+	wlsxTrapPortalServerName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Captive Portal Server used for Authentication.
+        			"
+	::= {wlsxTrapObjectsGroup 140 }
+
+	wlsxTrapPortalServerAddress OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the
+            Captive Portal Server IP or host name used for Authentication.
+        			"
+	::= {wlsxTrapObjectsGroup 141 }
+
+	wlsxTrapPortalServerDownReason OBJECT-TYPE
+		SYNTAX		ArubaPortalServerDownReason
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object specifies the captive portal server down reason.
+        			"
+	::= {wlsxTrapObjectsGroup 142 }
+
+	wlsxTrapLicensePlatformMismatchKey OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents license incompatibility with the given
+            platform.
+        			"
+	::= {wlsxTrapObjectsGroup 143 }
+
+	wlsxTrapTargetAPName OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+              This object is used in the traps to indicate the target's AP name.
+          			"
+	::= {wlsxTrapObjectsGroup 144 }
+
+	wlsxTrapTargetAPMac OBJECT-TYPE
+		SYNTAX		MacAddress
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+              This object is used in the traps to indicate the target's MAC address.
+          			"
+	::= {wlsxTrapObjectsGroup 145 }
+
+	wlsxTrapAPUSBStatus OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents plug in or plug out status of an USB device.
+        			"
+	::= {wlsxTrapObjectsGroup 146 }
+
+	wlsxTrapUSBVendorProductID OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents vendor ID or product ID of an USB device.
+        			"
+	::= {wlsxTrapObjectsGroup 147 }
+
+	wlsxTrapSwitchIpv6 OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the controller IPv6 address.
+        			"
+	::= {wlsxTrapObjectsGroup 148 }
+
+	wlsxTrapStationBlackListReasonStr OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            The Reason for which a station is black listed in details.
+        			"
+	::= {wlsxTrapObjectsGroup 149 }
+
+	wlsxTrapPeerIpAddress OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+              This object is used in the traps to indicate the peer IP address of Cluster VLAN probe.
+          			"
+	::= {wlsxTrapObjectsGroup 150 }
+
+	wlsxTrapConnectionStatus OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+              This object is used in the traps to indicate the Connection status of Cluster VLAN probe.
+          			"
+	::= {wlsxTrapObjectsGroup 151 }
+
+	wlsxTrapFailedVlan OBJECT-TYPE
+		SYNTAX		Integer32
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+              This object is used in the traps to indicate the failed VLAN id of cluster VLAN probe.
+          			"
+	::= {wlsxTrapObjectsGroup 152 }
+
+	wlsxTrapMatchedIpv6 OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object is used in the traps to indicate the IPv6 address
+        			"
+	::= {wlsxTrapObjectsGroup 153 }
+
+	wlsxTrapDeviceIpv6Address OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the IPv6 address of a device seen by an AP.
+        			"
+	::= {wlsxTrapObjectsGroup 154 }
+
+	wlsxTrapAuthFailureReason OBJECT-TYPE
+		SYNTAX		DisplayString(SIZE(0..64))
+		MAX-ACCESS	accessible-for-notify
+		STATUS		current
+		DESCRIPTION
+			"			
+            This object represents the reason for the authentication failure.
+        			"
+	::= {wlsxTrapObjectsGroup 155 }
+
+-- Definition of traps
+
+	wlsxVlanLinkUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVlanId,wlsxTrapAdminStatus,
+				wlsxTrapOperStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a VLAN interface is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1000 }
+
+	wlsxVlanLinkDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVlanId,wlsxTrapAdminStatus,
+				wlsxTrapOperStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a VLAN interface is down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1001 }
+
+	wlsxSignatureMatch NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPBSSID,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a signature match was detected.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1002 }
+
+	wlsxNodeRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPBSSID,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a node is exceeding the threshold set for 
+            the frame type.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1003 }
+
+	wlsxNormalTemperature NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTemperatureValue}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the Temperature has returned to 
+            an acceptable range.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1004 }
+
+	wlsxProcessRestart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the named process has been restarted.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1005 }
+
+	wlsxFlashSpaceOK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap which indicates that the system flash space is back 
+            to a sufficient level.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1006 }
+
+	wlsxMemoryUsageOK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap which indicates that the free memory usage is back 
+            to a sufficient level.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1007 }
+
+	wlsxPowerSupplyOK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the system power supply condition have
+            returned to normal operation status.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1008 }
+
+	wlsxFanOK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the fan has returned to normal.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1009 }
+
+	wlsxInRangeVoltage NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVoltageType,wlsxTrapVoltageValue}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the controller Voltage is back within range.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1010 }
+
+	wlsxCoverageHoleResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
+				wlsxTrapAPIpAddress,wlsxTrapNodeMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a coverage hole at location 
+            wlsxTrapAPLocation has been resolved.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1011 }
+
+	wlsxNSwitchIPChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSwitchIp}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the controller IP address has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1012 }
+
+	wlsxNSwitchRoleChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSwitchRole}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the role of the controller IP address has 
+            changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1013 }
+
+	wlsxNUserEntryCreated NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a new user was created.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1014 }
+
+	wlsxNUserEntryDeleted NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user was deleted.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1015 }
+
+	wlsxNUserEntryAuthenticated NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
+				wlsxTrapUserName,wlsxTrapUserAuthenticationMethod,
+				wlsxTrapUserRole}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user is Authenticated.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1016 }
+
+	wlsxNUserEntryDeAuthenticated NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user is Deauthenticated.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1017 }
+
+	wlsxNUserAuthenticationFailed NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
+				wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
+				wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a user authentication has failed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1018 }
+
+	wlsxNAuthServerReqTimedOut NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
+				wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
+				wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the authentication server request timed out.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1019 }
+
+	wlsxNAuthServerTimedOut NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerAddress,
+				wlsxTrapAuthServerTimeout,wlsxTrapUserName,
+				wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
+				wlsxTrapAPBSSID,wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the authentication server timed out.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1020 }
+
+	wlsxNAuthServerIsUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an authentication server is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1021 }
+
+	wlsxNAuthMaxUserEntries NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the user entries table is full and 
+            cannot add any more entries.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1022 }
+
+	wlsxNAuthMaxAclEntries NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the ACL Entries table is full and 
+            cannot add any more entries.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1023 }
+
+	wlsxNAuthMaxBWContracts NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the controller reached the maximum number 
+            of configurable Bandwidth contracts. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1024 }
+
+	wlsxNPowerSupplyFailure NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the power supply has failed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1025 }
+
+	wlsxNFanFailure NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the fan has failed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1026 }
+
+	wlsxNOutOfRangeVoltage NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVoltageType,wlsxTrapVoltageValue}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the controller voltage is out of range.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1027 }
+
+	wlsxNOutOfRangeTemperature NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTemperatureValue}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the controller internal temperature is
+            out of range. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1028 }
+
+	wlsxNLCInserted NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a line card is inserted.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1029 }
+
+	wlsxNSCInserted NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
+		STATUS		current
+		DESCRIPTION
+			"			
+            a Trap which indicates that a supervisor card is inserted.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1030 }
+
+	wlsxNGBICInserted NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a GBIC is inserted in a Line Card.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1031 }
+
+	wlsxNProcessDied NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a process has died.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1032 }
+
+	wlsxNProcessExceedsMemoryLimits NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapProcessName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a process is consuming Large
+            amounts of memory.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1033 }
+
+	wlsxNLowOnFlashSpace NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that the controller is running low on flash space.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1034 }
+
+	wlsxNLowMemory NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that the system free memory is low.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1035 }
+
+	wlsxNFanTrayRemoved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a fan tray is removed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1036 }
+
+	wlsxNFanTrayInserted NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a fan tray is inserted.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1037 }
+
+	wlsxNLCRemoved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a Line card is removed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1038 }
+
+	wlsxNPowerSupplyMissing NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that the power supply is missing.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1039 }
+
+	wlsxNAccessPointIsUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that an access point up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1040 }
+
+	wlsxNAccessPointIsDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that an access point down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1041 }
+
+	wlsxNCoverageHoleDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
+				wlsxTrapAPIpAddress,wlsxTrapNodeMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an access point at Location 
+            wlsxTrapAPLocation has detected a Coverage Hole.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1042 }
+
+	wlsxNChannelChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPBSSID,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an access point at Location 
+            wlsxTrapAPLocation has changed the channel.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1043 }
+
+	wlsxNStationAddedToBlackList NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapStationBlackListReason,
+				wlsxTrapStationBlackListReasonStr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the station is black listed. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1044 }
+
+	wlsxNStationRemovedFromBlackList NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the station is removed from the black list. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1045 }
+
+	wlsxNIpSpoofingDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSpoofedIpAddress,wlsxTrapSpoofedOldPhyAddress,
+				wlsxTrapSpoofedNewPhyAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap indicating that the controller detected IP Spoofing. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1046 }
+
+	wlsxNDBCommunicationFailure NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapDBName,wlsxTrapDBUserName,
+				wlsxTrapDBIpAddress,wlsxTrapDBType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that communication with Database failed. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1047 }
+
+	wlsxNVrrpStateChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVrrpID,wlsxTrapVrrpMasterIp,
+				wlsxTrapVrrpOperState}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that VRRP state has changed on the controller. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1048 }
+
+	wlsxNRadioAttributesChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPIpAddress,wlsxTrapAPChannel,
+				wlsxTrapAPTxPower}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates changes in the Radio attributes of an 
+            access point.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1049 }
+
+	wlsxNESIServerUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName,wlsxTrapESIServerName,
+				wlsxTrapESIServerIpAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a ESI server is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1050 }
+
+	wlsxNESIServerDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName,wlsxTrapESIServerName,
+				wlsxTrapESIServerIpAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that a ESI server is down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1051 }
+
+	wlsxNLicenseExpiry NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapLicenseDaysRemaining}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that one or more licenses on the controller will expire in wlsxTrapLicenseDaysRemaining days.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1052 }
+
+	wlsxUnsecureAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel,
+				wlsxTrapMatchedMac,wlsxTrapMatchedIp,
+				wlsxTrapRogueInfoURL,wlsxTrapMatchedIpv6}
+		STATUS		current
+		DESCRIPTION
+			"			This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address.  	"
+	::= {wlsxTrapDefinitionsGroup 1053 }
+
+	wlsxUnsecureAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+                This trap indicates that a previously detected access point, classified as Rogue,
+                is no longer present in the network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1054 }
+
+	wlsxStaImpersonation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected Station Impersonation.
+			"
+	::= {wlsxTrapDefinitionsGroup 1055 }
+
+	wlsxReservedChannelViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+				This trap indicates that an AM detected an access point
+				which is violating the Reserved Channel configuration.
+			"
+	::= {wlsxTrapDefinitionsGroup 1056 }
+
+	wlsxValidSSIDViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected an access point is violating 
+            Valid SSID configuration by using an SSID that is reserved for use by a valid AP only. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1057 }
+
+	wlsxChannelMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that has a channel misconfiguration 
+            because it is using a channel that is not valid.   
+			"
+	::= {wlsxTrapDefinitionsGroup 1058 }
+
+	wlsxOUIMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that has an OUI misconfiguration because
+            it is using an OUI that is not valid.
+			"
+	::= {wlsxTrapDefinitionsGroup 1059 }
+
+	wlsxSSIDMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using
+            an SSID that is not valid.
+			"
+	::= {wlsxTrapDefinitionsGroup 1060 }
+
+	wlsxShortPreableMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an access point has bad Short preamble
+			configuration.
+			"
+	::= {wlsxTrapDefinitionsGroup 1061 }
+
+	wlsxWPAMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that is misconfigured because it is not using WPA.
+			"
+	::= {wlsxTrapDefinitionsGroup 1062 }
+
+	wlsxAdhocNetworkDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1063 }
+
+	wlsxAdhocNetworkRemoved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that a previously detected Ad hoc Network is no
+            longer present in the network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1064 }
+
+	wlsxStaPolicyViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that Protection was enforced because a valid station's association to a non-valid access point violated Valid Station policy.
+			"
+	::= {wlsxTrapDefinitionsGroup 1065 }
+
+	wlsxRepeatWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		    This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets.
+			"
+	::= {wlsxTrapDefinitionsGroup 1066 }
+
+	wlsxWeakWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a valid access point is using a Weak WEP initialization vector.
+			"
+	::= {wlsxTrapDefinitionsGroup 1067 }
+
+	wlsxChannelInterferenceDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected channel interference.
+			"
+	::= {wlsxTrapDefinitionsGroup 1068 }
+
+	wlsxChannelInterferenceCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that a previously detected channel interference
+            is no longer present. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1069 }
+
+	wlsxAPInterferenceDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected interference for an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1070 }
+
+	wlsxAPInterferenceCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the previously detected interference for an access point
+            is no longer present. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1071 }
+
+	wlsxStaInterferenceDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected interference for a station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1072 }
+
+	wlsxStaInterferenceCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the previously detected interference for a station
+            is no longer present. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1073 }
+
+	wlsxFrameRetryRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
+			"
+	::= {wlsxTrapDefinitionsGroup 1074 }
+
+	wlsxFrameReceiveErrorRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Receive Error Rate.
+			"
+	::= {wlsxTrapDefinitionsGroup 1075 }
+
+	wlsxFrameFragmentationRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapTargetAPChannel,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that an access point exceeded the configured upper threshold for Frame Fragmentation Rate.
+			"
+	::= {wlsxTrapDefinitionsGroup 1076 }
+
+	wlsxFrameBandWidthRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a station or access point has exceeded the configured upper threshold for Bandwidth rate. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1077 }
+
+	wlsxFrameLowSpeedRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1078 }
+
+	wlsxFrameNonUnicastRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Non Unicast traffic rate. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1079 }
+
+	wlsxLoadbalancingEnabled NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM is reporting that an AP 
+			has enabled Load balancing.
+			"
+	::= {wlsxTrapDefinitionsGroup 1080 }
+
+	wlsxLoadbalancingDisabled NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM is reporting that an AP
+			has enabled Load balancing.
+			"
+	::= {wlsxTrapDefinitionsGroup 1081 }
+
+	wlsxChannelFrameRetryRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected that the configured upper threshold for Frame Retry Rate was exceeded on a channel. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1082 }
+
+	wlsxChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected that the configured upper threshold for Frame Fragmentation Rate was exceeded on a channel. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1083 }
+
+	wlsxChannelFrameErrorRateExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1084 }
+
+	wlsxSignatureMatchAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match in a frame from an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1085 }
+
+	wlsxSignatureMatchSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match in a frame from a Station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1086 }
+
+	wlsxChannelRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected frames on a channel which 
+            exceed the configured IDS rate threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1087 }
+
+	wlsxNodeRateAnomalyAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected frames transmitted or received by an 
+            access point, which exceed the configured IDS rate threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1088 }
+
+	wlsxNodeRateAnomalySta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected frames transmitted or received by a 
+            node, which exceed the configured IDS rate threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1089 }
+
+	wlsxEAPRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the rate of EAP Handshake packets 
+            received by an AP has exceeded the configured IDS EAP Handshake rate threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1090 }
+
+	wlsxSignalAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		    This trap indicates that an AM detected a Signal Anomaly.
+			"
+	::= {wlsxTrapDefinitionsGroup 1091 }
+
+	wlsxSequenceNumberAnomalyAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM received packets from an AP
+			which exceeds the acceptable sequence number difference. 
+            The acceptable sequence number difference is an IDS configuration 
+            object.
+			"
+	::= {wlsxTrapDefinitionsGroup 1092 }
+
+	wlsxSequenceNumberAnomalySta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM received packets from a Node
+			which exceeds the acceptable sequence number difference. 
+            The acceptable sequence number difference is an IDS configuration 
+            object.
+                	"
+	::= {wlsxTrapDefinitionsGroup 1093 }
+
+	wlsxDisconnectStationAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a station Disconnect 
+            attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1094 }
+
+	wlsxApFloodAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the number of potential fake APs detected by 
+			an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands.
+			"
+	::= {wlsxTrapDefinitionsGroup 1095 }
+
+	wlsxAdhocNetwork NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected an Ad hoc 
+			Network. An Station is connected to an ad hoc AP.
+			"
+	::= {wlsxTrapDefinitionsGroup 1096 }
+
+	wlsxWirelessBridge NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTransmitterMac,wlsxTrapReceiverMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses.
+			"
+	::= {wlsxTrapDefinitionsGroup 1097 }
+
+	wlsxInvalidMacOUIAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an invalid MAC OUI in the BSSID of a frame.  An invalid MAC OUI suggests that the frame may be spoofed.
+			"
+	::= {wlsxTrapDefinitionsGroup 1098 }
+
+	wlsxInvalidMacOUISta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAddressType,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an invalid MAC OUI in the SRC or DST address of a frame. An invalid MAC OUI suggests that the frame may be spoofed.
+			"
+	::= {wlsxTrapDefinitionsGroup 1099 }
+
+	wlsxWEPMisconfiguration NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled.
+			"
+	::= {wlsxTrapDefinitionsGroup 1100 }
+
+	wlsxStaRepeatWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a valid station is using the same WEP initialization vector in consecutive packets.
+			"
+	::= {wlsxTrapDefinitionsGroup 1101 }
+
+	wlsxStaWeakWEPIVViolation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that a valid station is using a Weak WEP initialization vector.
+			"
+	::= {wlsxTrapDefinitionsGroup 1102 }
+
+	wlsxStaAssociatedToUnsecureAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel,wlsxTrapRogueInfoURL}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a client associated
+			with a Rogue access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1103 }
+
+	wlsxStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that a previously detected rogue access point 
+            association is no longer present.
+			"
+	::= {wlsxTrapDefinitionsGroup 1104 }
+
+	wlsxAdhocNetworkBridgeDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network that is bridging to a wired network
+			"
+	::= {wlsxTrapDefinitionsGroup 1105 }
+
+	wlsxInterferingApDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel,
+				wlsxTrapInterferingAPInfoURL}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an access point classified as Interfering. The access point 
+            is declared Interfering because it is neither authorized or classified as Rogue. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1106 }
+
+	wlsxPortUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot,wlsxTrapPortNumber,
+				wlsxTrapAdminStatus,wlsxTrapOperStatus}
+		STATUS		deprecated
+		DESCRIPTION
+			"			
+            This trap indicates that a Physical port is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1107 }
+
+	wlsxPortDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCardSlot,wlsxTrapPortNumber,
+				wlsxTrapAdminStatus,wlsxTrapOperStatus}
+		STATUS		deprecated
+		DESCRIPTION
+			"			
+            This trap indicates that a Physical port is Down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1108 }
+
+	wlsxBSSIDIsUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPBSSID,wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that an access point BSSID is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1109 }
+
+	wlsxBSSIDIsDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPBSSID,wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that an access point BSSID is down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1110 }
+
+	wlsxColdStart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            An enterprise version of cold start trap, which contains the controller time stamp.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1111 }
+
+	wlsxWarmStart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            An enterprise version of warm start trap, which contains the controller time stamp.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1112 }
+
+	wlsxAPImpersonation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold.
+            The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1113 }
+
+	wlsxInformQueueOverFlow NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapHostIp,wlsxTrapHostPort}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an Inform queue overflow condition occurred.
+			"
+	::= {wlsxTrapDefinitionsGroup 1114 }
+
+	wlsxNAuthServerIsDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName,wlsxTrapAuthServerAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an authentication server is down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1115 }
+
+	wlsxCTSTransferError NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCTSTransferType,wlsxTrapCTSURL}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates the status of the configuration transfer from the management station.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1116 }
+
+	wlsxCTSTransferSucceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCTSTransferType,wlsxTrapCTSURL}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates the status of the configuration transfer from the management station.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1117 }
+
+	wlsxConfigurationUpdateError NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapUpdateFailureReason,
+				wlsxTrapUpdateFailedObj}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates the configuration update status.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1118 }
+
+	wlsxConfigurationUpdateSucceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates the configuration update status.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1119 }
+
+	wlsxGlobalConfigurationChangeNotification NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapGlobalConfigObj}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that global configuration was modified on the controller.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1120 }
+
+	wlsxUserEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the user configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1121 }
+
+	wlsxAPBssidEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPBSSID,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the BSSID configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1122 }
+
+	wlsxAPRadioEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the Radio configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1123 }
+
+	wlsxAPEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the AP configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1124 }
+
+	wlsxSwitchListEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapSwitchIp,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the controller list has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1125 }
+
+	wlsxPortEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapCardSlot,
+				wlsxTrapPortNumber,wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the port configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1126 }
+
+	wlsxVlanEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapVlanId,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the VLAN configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1127 }
+
+	wlsxVlanInterfaceEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapVlanId,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the VLAN Interface configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1128 }
+
+	wlsxWindowsBridgeDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected a station
+		        that is bridging from a wireless network 
+                        to a wired network
+			"
+	::= {wlsxTrapDefinitionsGroup 1129 }
+
+	wlsxLicenseEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapLicenseId,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the license table has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1130 }
+
+	wlsxEsiServerChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapESIServerName,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the ESI server table has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1131 }
+
+	wlsxMonAPEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapTargetAPBSSID,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a monitored AP entry changed
+        	"
+	::= {wlsxTrapDefinitionsGroup 1132 }
+
+	wlsxMonStationEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapNodeMac,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a monitored station entry changed
+        	"
+	::= {wlsxTrapDefinitionsGroup 1133 }
+
+	wlsxSignAPNetstumbler NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Netstumbler from an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1134 }
+
+	wlsxSignStaNetstumbler NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Netstumbler from a Station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1135 }
+
+	wlsxSignAPAsleap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for ASLEAP from an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1136 }
+
+	wlsxSignStaAsleap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for ASLEAP from a Station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1137 }
+
+	wlsxSignAPAirjack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for AirJack from an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1138 }
+
+	wlsxSignStaAirjack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for AirJack from a Station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1139 }
+
+	wlsxSignAPNullProbeResp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Null-Probe-Response from an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1140 }
+
+	wlsxSignStaNullProbeResp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1141 }
+
+	wlsxSignAPDeauthBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Deauth-Broadcast from an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1142 }
+
+	wlsxSignStaDeauthBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSignatureName,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station.
+			"
+	::= {wlsxTrapDefinitionsGroup 1143 }
+
+	wlsxWindowsBridgeDetectedAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP is detecting an access point that is bridging from a wireless network
+            to a wired network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1144 }
+
+	wlsxWindowsBridgeDetectedSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP is detecting a station that is bridging from a wireless network
+            to a wired network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1145 }
+
+	wlsxAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network that is bridging to a wired network
+			"
+	::= {wlsxTrapDefinitionsGroup 1146 }
+
+	wlsxAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM has detected an Ad hoc
+			network that is bridging to a wired network
+			"
+	::= {wlsxTrapDefinitionsGroup 1147 }
+
+	wlsxDisconnectStationAttackAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a station disconnect 
+            attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1148 }
+
+	wlsxDisconnectStationAttackSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFrameType,wlsxTrapSourceMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AM detected a station Disconnect 
+            attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1149 }
+
+	wlsxSuspectUnsecureAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPRadioNumber,wlsxTrapMatchedMac,
+				wlsxTrapMatchedIp,wlsxTrapConfidenceLevel,
+				wlsxTrapAPLocation,wlsxTrapRogueInfoURL,
+				wlsxTrapMatchedIpv6}
+		STATUS		current
+		DESCRIPTION
+			"			This trap indicates that an access point, classified as Suspected Rogue, has been
+                detected by a Controller. The AP is suspected to be rogue, 
+                with the supplied confidence level, because it was matched to 
+                the wired MAC address. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1150 }
+
+	wlsxSuspectUnsecureAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPRadioNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that a previously detected access point, classified Suspected 
+                Rogue, is either no longer present in the network or
+                has changed its state.
+			"
+	::= {wlsxTrapDefinitionsGroup 1151 }
+
+	wlsxConfigurationLicenseMismatch NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapConfigurationId,wlsxTrapMissingLicenses}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates the configuration update status in the case
+            where some configuration could not be applied due to missing licenses.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1152 }
+
+	wlsxVoiceCdrBufferThresholdReached NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxVoiceCurrentNumCdr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the CDR buffer threshold has been reached
+        	"
+	::= {wlsxTrapDefinitionsGroup 1153 }
+
+	wlsxTunnelUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTunnelId,wlsxTrapTunnelUpReason,
+				wlsxTrapTunnelStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a tunnel interface is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1154 }
+
+	wlsxTunnelDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTunnelId,wlsxTrapTunnelDownReason,
+				wlsxTrapTunnelStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a tunnel interface is down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1155 }
+
+	wlsxMeshNodeEntryChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTableGenNumber,wlsxTrapAPMacAddress,
+				wlsxTrapTableEntryChangeType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the mesh node configuration has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1156 }
+
+	wlsxHtGreenfieldSupported NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+	    This trap indicates that an AP detected an access point that supports HT Greenfield mode.
+		"
+	::= {wlsxTrapDefinitionsGroup 1157 }
+
+	wlsxHT40MHzIntoleranceAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+	    This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting.
+		"
+	::= {wlsxTrapDefinitionsGroup 1158 }
+
+	wlsxHT40MHzIntoleranceSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPChannel,wlsxTrapFrameType,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that the system is detecting an HT 40MHz Intolerance setting from a Station.
+		"
+	::= {wlsxTrapDefinitionsGroup 1159 }
+
+	wlsxNAuthServerAllInService NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapESIServerGrpName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that all authentication servers is a server group are brought back in service.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1160 }
+
+	wlsxNAdhocNetwork NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc 
+			network where a station is connected to an ad hoc access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1161 }
+
+	wlsxNAdhocNetworkBridgeDetectedAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc
+			network that is bridging to a wired network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1162 }
+
+	wlsxNAdhocNetworkBridgeDetectedSta NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapTargetAPSSID,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc
+			network that is bridging to a wired network.
+			"
+	::= {wlsxTrapDefinitionsGroup 1163 }
+
+	wlsxNAuthMaxXsecUserEntries NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the xSec user limit is reached.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1164 }
+
+	wlsxNVpnMaxSessions NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the VPN session limit is reached.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1165 }
+
+	wlsxNRapExpiredPSK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPIpAddress,wlsxTrapApSerialNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the RAP is using the Expired PSK.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1166 }
+
+	wlsxNRapWarnExpiredPSK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTimeStr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the Cached IKE PSK for RAPs will expire soon.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1167 }
+
+	wlsxNConnectionResetWithLocal NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapMasterName,wlsxTrapMasterIp,
+				wlsxTrapLocalName,wlsxTrapLocalIp,
+				wlsxTrapTimeStr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that tcp connection between master controller and local controller has been lost.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1168 }
+
+	wlsxNApOnBackupController NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapBackupControllerIp,
+				wlsxTrapPrimaryControllerIp}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the AP has registered with the backup controller.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1169 }
+
+	wlsxClientFloodAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the number of potential fake clients detected by 
+			an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands.
+			"
+	::= {wlsxTrapDefinitionsGroup 1170 }
+
+	wlsxValidClientNotUsingEncryption NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapNodeMac,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		    This trap indicates that an AP detected an unencrypted data frame between a valid client and an access point.
+			"
+	::= {wlsxTrapDefinitionsGroup 1171 }
+
+	wlsxAdhocUsingValidSSID NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc network using a valid/protected SSID.
+			"
+	::= {wlsxTrapDefinitionsGroup 1172 }
+
+	wlsxAPSpoofingDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapSpoofedFrameType,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected that one of its virtual APs is being spoofed using MAC spoofing.
+			"
+	::= {wlsxTrapDefinitionsGroup 1173 }
+
+	wlsxClientAssociatingOnWrongChannel NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapSpoofedFrameType,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel.  This can be a sign that the BSSID is 
+            being spoofed in order to fool the client into thinking the AP is operating on another channel.
+			"
+	::= {wlsxTrapDefinitionsGroup 1174 }
+
+	wlsxNDisconnectStationAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets
+            received by that client exceeds the configured threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1175 }
+
+	wlsxNStaUnAssociatedFromUnsecureAP NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapNodeMac,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP that had previously detected a client association to a Rogue access point is no longer detecting that association.
+			"
+	::= {wlsxTrapDefinitionsGroup 1176 }
+
+	wlsxOmertaAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an Omerta attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1177 }
+
+	wlsxTKIPReplayAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a possible TKIP replay attack. If successful this could be the precursor to more
+			advanced attacks.
+			"
+	::= {wlsxTrapDefinitionsGroup 1178 }
+
+	wlsxChopChopAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a ChopChop attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1179 }
+
+	wlsxFataJackAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a FATA-Jack attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1180 }
+
+	wlsxInvalidAddressCombination NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapAPChannel,
+				wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an invalid source and destination combination.
+			"
+	::= {wlsxTrapDefinitionsGroup 1181 }
+
+	wlsxValidClientMisassociation NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAssociationType,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP.
+			"
+	::= {wlsxTrapDefinitionsGroup 1182 }
+
+	wlsxMalformedHTIEDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1183 }
+
+	wlsxMalformedAssocReqDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a malformed association request with a NULL SSID.
+			"
+	::= {wlsxTrapDefinitionsGroup 1184 }
+
+	wlsxOverflowIEDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1185 }
+
+	wlsxOverflowEAPOLKeyDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message.
+			"
+	::= {wlsxTrapDefinitionsGroup 1186 }
+
+	wlsxMalformedFrameLargeDurationDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an unusually large duration in a wireless frame. This may be an attempt to block other devices from transmitting.
+			"
+	::= {wlsxTrapDefinitionsGroup 1187 }
+
+	wlsxMalformedFrameWrongChannelDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapTargetAPChannel,wlsxTrapAPChannel,
+				wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP.
+			"
+	::= {wlsxTrapDefinitionsGroup 1188 }
+
+	wlsxMalformedAuthFrame NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an authentication frame with
+            either a bad algorithm (similar to Fata-Jack) or a bad transaction.
+			"
+	::= {wlsxTrapDefinitionsGroup 1189 }
+
+	wlsxCTSRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the rate of CTS packets 
+            received by an AP exceeds the configured IDS threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1190 }
+
+	wlsxRTSRateAnomaly NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that the rate of RTS packets 
+            received by an AP exceeds the configured IDS threshold.
+			"
+	::= {wlsxTrapDefinitionsGroup 1191 }
+
+	wlsxNRogueAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+				This trap indicates that an unauthorized access point is connected to the wired network. The access point is 
+                classified as Rogue by the system.
+			"
+	::= {wlsxTrapDefinitionsGroup 1192 }
+
+	wlsxNRogueAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+                This trap indicates that a previously detected access point, classified as Rogue,
+                is either no longer present in the network or it changed its state.
+			"
+	::= {wlsxTrapDefinitionsGroup 1193 }
+
+	wlsxNeighborAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an access point has been classified as a Neighbor by the system. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1194 }
+
+	wlsxNInterferingAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an access point has been classified as Interfering by the system. The access point 
+            is declared Interfering because it is not authorized, nor has it been classified as a Rogue. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1195 }
+
+	wlsxNSuspectRogueAPDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel,wlsxTrapConfidenceLevel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that an access point, classified as Suspected Rogue, is 
+                detected by the system. The AP is suspected to be rogue 
+                with the supplied confidence level. 
+			"
+	::= {wlsxTrapDefinitionsGroup 1196 }
+
+	wlsxNSuspectRogueAPResolved NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+		This trap indicates that a previously detected access point, classified as Suspected 
+                Rogue, is either no longer present in the network or
+                has changed its state.
+			"
+	::= {wlsxTrapDefinitionsGroup 1197 }
+
+	wlsxBlockAckAttackDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapSourceMac,
+				wlsxTrapReceiverMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+        This trap indicates that an attempt has been made to deny service to
+        the source address by spoofing a block ACK add request that sets a
+        sequence number window outside the currently used window.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1198 }
+
+	wlsxHotspotterAttackDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapNodeMac,
+				wlsxTrapSourceMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapSnr,
+				wlsxTrapTargetAPSSID}
+		STATUS		current
+		DESCRIPTION
+			"			
+        This trap indicates that a new AP has appeared immediately following a client probe request.
+        This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake
+        hotspot or other wireless network.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1199 }
+
+	wlsxNSignatureMatch NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1200 }
+
+	wlsxNSignatureMatchNetstumbler NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Netstumbler in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1201 }
+
+	wlsxNSignatureMatchAsleap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for ASLEAP in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1202 }
+
+	wlsxNSignatureMatchAirjack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Airjack in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1203 }
+
+	wlsxNSignatureMatchNullProbeResp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Null-Probe-Response in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1204 }
+
+	wlsxNSignatureMatchDeauthBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Deauth-Broadcast in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1205 }
+
+	wlsxNSignatureMatchDisassocBcast NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1206 }
+
+	wlsxNSignatureMatchWellenreiter NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTransmitterMac,
+				wlsxTrapReceiverMac,wlsxTrapSignatureName,
+				wlsxTrapSnr,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a signature match for Wellenreiter in a frame.
+			"
+	::= {wlsxTrapDefinitionsGroup 1207 }
+
+	wlsxAPDeauthContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapAPChannel,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by disconnecting its client.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1208 }
+
+	wlsxClientDeauthContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain a client by disconnecting it from the AP that it is associated with.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1209 }
+
+	wlsxAPWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapDeviceIpv6Address}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1210 }
+
+	wlsxClientWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapDeviceIpv6Address}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1211 }
+
+	wlsxAPTaggedWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapVlanId,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapDeviceIpv6Address}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1212 }
+
+	wlsxClientTaggedWiredContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapNodeMac,wlsxTrapTargetAPBSSID,
+				wlsxTrapDeviceIpAddress,wlsxTrapDeviceMac,
+				wlsxTrapVlanId,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapDeviceIpv6Address}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1213 }
+
+	wlsxTarpitContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapNodeMac,
+				wlsxTrapAPChannel,wlsxTrapTargetAPChannel,
+				wlsxTrapSourceMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP has attempted to contain an access point by moving a client that is attempting to associate to it to a tarpit.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1214 }
+
+	wlsxVoiceClientLocationUpdate NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVcIpAddress,wlsxTrapVcMacAddress,
+				wlsxTrapSwitchIp,wlsxTrapAPName,
+				wlsxTrapAPMacAddress,wlsxTrapApMode,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the location of voice client has been changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1215 }
+
+	wlsxAPChannelChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPChannel,wlsxTrapAPChannelSec,
+				wlsxTrapAPPrevChannel,wlsxTrapAPPrevChannelSec,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPARMChangeReason}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP changed its channel.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1216 }
+
+	wlsxAPPowerChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPTxPower,wlsxTrapAPPrevTxPower,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP changed its transmit power level.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1217 }
+
+	wlsxAPModeChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPCurMode,wlsxTrapAPPrevMode,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation}
+		STATUS		current
+		DESCRIPTION
+			"			
+	This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
+      	"
+	::= {wlsxTrapDefinitionsGroup 1218 }
+
+	wlsxUserEntryAttributesChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserIpAddress,wlsxTrapUserPhyAddress,
+				wlsxTrapAPBSSID,wlsxTrapAPName,
+				wlsxTrapCardSlot,wlsxTrapPortNumber,
+				wlsxTrapUserAttributeChangeType,wlsxTrapHTMode,
+				wlsxTrapPhyType}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the user entry attributes have changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1219 }
+
+	wlsxPowerSaveDosAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected a Power Save DoS attack.
+			"
+	::= {wlsxTrapDefinitionsGroup 1220 }
+
+	wlsxNAPMasterStatusChange NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapApControllerIp,
+				wlsxTrapApMasterStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the status of the AP as seen by
+            the master controller has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1221 }
+
+	wlsxNAdhocUsingValidSSID NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapSourceMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+			This trap indicates that an AP detected an ad hoc network node using a valid/protected SSID.
+			"
+	::= {wlsxTrapDefinitionsGroup 1222 }
+
+	wlsxCRLExpired NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCaName,wlsxTrapCrlName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the CRL associated with the particular Trustpoint is expired.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1223 }
+
+	wlsxMgmtUserAuthenticationFailed NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
+				wlsxTrapAuthServerAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that a management user authentication has failed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1224 }
+
+	wlsxNConnectionBackfromLocal NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapMasterName,wlsxTrapMasterIp,
+				wlsxTrapLocalName,wlsxTrapLocalIp,
+				wlsxTrapTimeStr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that tcp connection between master controller and local controller is back.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1225 }
+
+	wlsxAPNumUpgradeFailure NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
+				wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of upgrade failure of an access point.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1226 }
+
+	wlsxAPNumWarmStarts NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
+				wlsxTrapAPIpAddress,wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of warm starts of an access point.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1227 }
+
+	wlsxAPNumColdStarts NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
+				wlsxTrapAPIpAddress,wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of cold starts of an access point.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1228 }
+
+	wlsxAPNumDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
+				wlsxTrapAPIpAddress,wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of down alarms of an access point.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1229 }
+
+	wlsxAPNumRadioDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPLocation,
+				wlsxTrapAPIpAddress,wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of radio down alarms of an access point.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1230 }
+
+	wlsxNumClockSyncErrors NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the total number of clock sync errors between the
+            switch and access points.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1231 }
+
+	wlsxNumColdStart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of cold-starts of the switch.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1232 }
+
+	wlsxNumWarmStart NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates the number of warm-starts of the switch.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1233 }
+
+	wlsxWirelessHostedNetworkDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapClientClassification,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an AP detected a wireless client that is
+            hosting a softAP. The softAP could be used to share the hosting 
+            client's  wired or wireless network connection with other wireless users. 
+        	"
+	::= {wlsxTrapDefinitionsGroup 1234 }
+
+	wlsxClientAssociatedToHostedNetwork NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an AP detected that a wireless client associated 
+            to an access point that is hosted by another wireless client.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1235 }
+
+	wlsxThresholdExceeded NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxThresholdResourceType,wlsxThresholdResourceName,
+				wlsxThresholdValue,wlsxResourceValue}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap indicates a particular resource under monitoring has gone above the threshold specified.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1236 }
+
+	wlsxThresholdCleared NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxThresholdResourceType,wlsxThresholdResourceName,
+				wlsxThresholdValue,wlsxResourceValue}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap indicates a particular resource under monitoring has come below the threshold specified.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1237 }
+
+	wlsxWirelessHostedNetworkContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that containment is being enforced on a client associated to a hosted network.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1238 }
+
+	wlsxHostOfWirelessNetworkContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPBSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that containment is being enforced on a client that is hosting a wireless hosted network.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1239 }
+
+	wlsxEnhancedAdhocContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapAPLocation,
+				wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an AP has attempted to contain an adhoc node by disconnecting it from other members of the adhoc network.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1240 }
+
+	wlsxPowerSupplyOKTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPowerSupplyNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+             This trap indicates that the system power supply condition have
+             returned to normal operation status.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1241 }
+
+	wlsxPowerSupplyFailureTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPowerSupplyNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+             A trap which indicates that the power supply has failed.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1242 }
+
+	wlsxFanTrayRemovedTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFanTrayNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+             A Trap which indicates that a fan tray is removed.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1243 }
+
+	wlsxFanTrayInsertedTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFanTrayNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+             A Trap which indicates that a fan tray is inserted.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1244 }
+
+	wlsxPowerSupplyMissingTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPowerSupplyNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+             A Trap which indicates that the power supply is missing.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1245 }
+
+	wlsxStackTopologyChangeTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxStackMemberMacAddress,wlsxStackPrevSlot,
+				wlsxStackCurrentSlot,wlsxStackPrevState,
+				wlsxStackCurrentState,wlsxStackChangeEvent}
+		STATUS		current
+		DESCRIPTION
+			"			
+              When change happens in any topology of the stack element in the
+              stack, then a notification is sent to the Management Entity.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1246 }
+
+	wlsxStackIfStateChangeTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxStackMemberMacAddress,wlsxStackMemberSlotNumber,
+				wlsxStackIfName,wlsxStackProtoIfTopoJoined}
+		STATUS		current
+		DESCRIPTION
+			"			
+              When any stacking interface in any stack element joins or leaves
+              stacking topology, then a notification is sent to the Management
+              Entity with slot and interface information.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1247 }
+
+	wlsxLicenseServerExpiry NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapLicenseServerDaysRemaining}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that licenses sent from the license 
+            server will expire in wlsxTrapLicenseServerDaysRemaining days.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1248 }
+
+	wlsxLicenseClientExpiry NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapLicenseClientDaysRemaining}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that licenses contributed by a license 
+            client will expire in wlsxTrapLicenseClientDaysRemaining days.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1249 }
+
+	wlsxIfStateChangeTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxIfIndex,wlsxIfState,
+				wlsxIfStateChangeReason}
+		STATUS		current
+		DESCRIPTION
+			"			
+              When the link state of an interface changes due to reason
+              specified by wlsxIfStateChangeReason object, a notification is
+              sent to the Management Entity with reason for this state change
+              and interface information.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1250 }
+
+	wlsxWMSOffloadRecommended NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+              This trap indicates that current state in the WMS module shows that WMS is reaching capacity, and 
+              so it is recommended to enable WMS-Offload.  
+          	"
+	::= {wlsxTrapDefinitionsGroup 1251 }
+
+	wlsxAPActiveUplinkChanged NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPPreviousUplinkType,
+				wlsxTrapAPPreviousUplinkActiveTime,wlsxTrapAPActiveUplinkType,
+				wlsxTrapAPUplinkChangeReason}
+		STATUS		current
+		DESCRIPTION
+			"			
+              When the active uplink of an AP changes, a notification is
+              sent to the Management Entity with the new uplink type
+          	"
+	::= {wlsxTrapDefinitionsGroup 1252 }
+
+	wlsxCertExpiringSoon NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapExpiringCertName}
+		STATUS		current
+		DESCRIPTION
+			"			
+              This trap indicates that a particular Certificate is going to expire in less than 60 days.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1253 }
+
+	wlsxCertExpired NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapExpiredCertName}
+		STATUS		current
+		DESCRIPTION
+			"			
+              This trap indicates that a particular Certificate has expired and is no longer valid.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1254 }
+
+	wlsxAPManagedModeConfigFailureTrap NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPManagedModeConfigFailure}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that config apply has failed on the IAP.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1255 }
+
+	wlsxNAuthServerAcctTimedOut NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserName,wlsxTrapUserIpAddress,
+				wlsxTrapUserPhyAddress,wlsxTrapAuthServerName,
+				wlsxTrapAuthServerAddress,wlsxTrapAPBSSID,
+				wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+         This trap indicates that the authentication server accounting timed out.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1256 }
+
+	wlsxAPUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapAPIpAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that AP is Up with AP name and IP address.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1257 }
+
+	wlsxAPDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapAPIpAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that AP is Down with AP name and IP address.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1258 }
+
+	wlsxPortalServerDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPortalServerName,wlsxTrapPortalServerAddress,
+				wlsxTrapAPName,wlsxTrapPortalServerDownReason}
+		STATUS		current
+		DESCRIPTION
+			"			
+         This trap indicates that the captive portal server is down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1259 }
+
+	wlsxPortalServerUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPortalServerName,wlsxTrapPortalServerAddress,
+				wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+         This trap indicates that the captive portal server is up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1260 }
+
+	wlsxNAdhocUsingValidSSIDContainment NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID,
+				wlsxTrapNodeMac,wlsxTrapSnr,
+				wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapAPChannel}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that containment is being enforced on an ad hoc wireless network node using a valid/protected SSID.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1261 }
+
+	wlsxLicensePlatformMismatch NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapLicensePlatformMismatchKey}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that license to be installed is not compatible with the platform.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1262 }
+
+	wlsxIAPVoiceClientLocationUpdate NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapVcIpAddress,wlsxTrapVcMacAddress,
+				wlsxTrapAPMacAddress,wlsxTrapAPName}
+		STATUS		current
+		DESCRIPTION
+			"			
+           The trap represents a IAP voice client location update.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1263 }
+
+	wlsxNAceUsageThreshold NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the ACE Entries table has reached
+            eighty percent of the maximum limit.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1264 }
+
+	wlsxNWebCCLicenseEnforcement NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that web-cc license enforcement has been triggered.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1265 }
+
+	wlsxNFanAbsent NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapFanNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A trap which indicates that the fan is absent.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1266 }
+
+	wlsxWPAFTAttack NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber,
+				wlsxTrapAPLocation,wlsxTrapNodeMac,
+				wlsxTrapAPChannel,wlsxTrapTargetAPBSSID}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates there is a possible attack of the Fast BSS Transition causing a WPA key re-installation.
+            This can be indicative of a security breach where an attacker can hijack a client's association and/or
+            decrypt an otherwise secure connection.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1267 }
+
+	wlsxMitMDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPLocation,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapSourceMac,
+				wlsxTrapTargetAPBSSID,wlsxTrapAPChannel,
+				wlsxTrapSnr}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an AP detected a possible channel-based Man in the Middle attack by someone using spoofed beacons with an invalid Channel Switch Announcement.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1268 }
+
+	wlsxAPPortUp NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapPortNumber,wlsxTrapOperStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that AP's secure jack port is Up.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1269 }
+
+	wlsxAPPortDown NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapPortNumber,wlsxTrapOperStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that AP's secure jack port is Down.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1270 }
+
+	wlsxAPLoopDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapPortNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that loop is detected on AP's secure jack port.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1271 }
+
+	wlsxAPBROADCASTSTORM NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapPortNumber}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that broadcast storm is detected on AP's secure jack port.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1272 }
+
+	wlsxAPIPConflict NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapAPIpAddress,wlsxTrapSourceMac,
+				wlsxTrapCount}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an IP conflict is detected on AP.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1273 }
+
+	wlsxCLEARPASSSERVERINVALID NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAuthServerName}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that CLEARPASS server is not valid when using the CA to verity the server for download-role.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1274 }
+
+	wlsxNLowOnFlash1Space NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            A Trap which indicates that the controller is running low on flash1 space.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1275 }
+
+	wlsxFlash1SpaceOK NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap which indicates that the system flash1 space is back
+            to a sufficient level.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1276 }
+
+	wlsxTHERMALSHUTDOWN NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapAPIpAddress}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an AP is overheat and in shutdown mode.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1277 }
+
+	wlsxPhonyBSSIDDetected NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPLocation,wlsxTrapAPMacAddress,
+				wlsxTrapAPRadioNumber,wlsxTrapTargetAPBSSID,
+				wlsxTrapAPChannel,wlsxTrapTargetAPName,
+				wlsxTrapTargetAPMac}
+		STATUS		current
+		DESCRIPTION
+			"			
+             This trap indicates that an AP detected a non-configured BSSID that should belong to one of our known valid APs.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1278 }
+
+	wlsxAPUSBPLUGALARM NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapUSBVendorProductID,wlsxTrapUSBVendorProductID,
+				wlsxTrapAPUSBStatus}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that an USB device is plugged in or out to an AP.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1279 }
+
+	wlsxNSwitchIPv6Changed NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapSwitchIpv6}
+		STATUS		current
+		DESCRIPTION
+			"			
+            This trap indicates that the controller IPv6 address has changed.
+        	"
+	::= {wlsxTrapDefinitionsGroup 1280 }
+
+	wlsxNDot1xThresholdLimitHit NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+             A Trap which indicates that the controller is running on high optimum limit.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1281 }
+
+	wlsxNDot1xTotalLimitHit NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime}
+		STATUS		current
+		DESCRIPTION
+			"			
+             A Trap which indicates that the controller is running on full optimum limit.
+         	"
+	::= {wlsxTrapDefinitionsGroup 1282 }
+
+	wlsxClusterVlanProbeStatus NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapPeerIpAddress,wlsxTrapConnectionStatus,
+				wlsxTrapFailedVlan}
+		STATUS		current
+		DESCRIPTION
+			"			
+              This trap indicates the cluster VLAN probe status.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1283 }
+
+	wlsxClientRejectedByMaxClientCount NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserPhyAddress,wlsxTrapAPBSSID,
+				wlsxTrapAPMacAddress,wlsxTrapAPName,
+				wlsxTrapEssid}
+		STATUS		current
+		DESCRIPTION
+			"			
+              This trap indicates the client is rejected by the max client count.
+          	"
+	::= {wlsxTrapDefinitionsGroup 1284 }
+
+	wlsxClientPskAuthenticationFailed NOTIFICATION-TYPE
+		OBJECTS {wlsxTrapTime, wlsxTrapUserPhyAddress,wlsxTrapAuthFailureReason,
+				wlsxTrapAPBSSID,wlsxTrapAPMacAddress,
+				wlsxTrapAPName,wlsxTrapEssid}
+		STATUS		current
+		DESCRIPTION
+			"			 
+              This trap indicates the client PSK Authentication Failed. 
+          	"
+	::= {wlsxTrapDefinitionsGroup 1285 }
+
+END
diff --git a/MIBS/arubaos/WLSX-TUNNELEDNODE-MIB b/MIBS/arubaos/WLSX-TUNNELEDNODE-MIB
new file mode 100644
index 0000000..9b892b9
--- /dev/null
+++ b/MIBS/arubaos/WLSX-TUNNELEDNODE-MIB
@@ -0,0 +1,125 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-TUNNELEDNODE-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxTunneledNodeMIB MODULE-IDENTITY
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626" 
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the Controller Transport Service (Cts) in the 
+			Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 17 }
+
+   wlsxTunneledNodeOpGroup     	OBJECT IDENTIFIER ::= { wlsxTunneledNodeMIB 1 }
+
+   wlsxTunneledNodeRequestTable OBJECT-TYPE
+	SYNTAX			SEQUENCE OF WlsxTunneledNodeRequestEntry
+	MAX-ACCESS		not-accessible
+	STATUS			current
+	DESCRIPTION
+		"
+		"
+	::= { wlsxTunneledNodeOpGroup 1 }
+
+	wlsxTunneledNodeRequestEntry OBJECT-TYPE
+		SYNTAX WlsxTunneledNodeRequestEntry
+		MAX-ACCESS not-accessible
+		STATUS	current
+		DESCRIPTION
+			""
+		INDEX { wlsxTunneledNodeMAC }
+		::= { wlsxTunneledNodeRequestTable 1 }
+
+	WlsxTunneledNodeRequestEntry ::=
+		SEQUENCE {
+            wlsxTunneledNodeMAC MacAddress,
+			wlsxTunneledNodeIp	IpAddress,
+			wlsxNumTunnels	    Integer32,
+            wlsxTunneledNodeType  Integer32
+		}
+
+    wlsxTunneledNodeMAC OBJECT-TYPE
+        SYNTAX  MacAddress
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            " 
+            MAC address of the Tunneled Node
+            "
+        ::= { wlsxTunneledNodeRequestEntry 1 }
+
+	wlsxTunneledNodeIp OBJECT-TYPE
+		SYNTAX 	IpAddress
+		MAX-ACCESS read-only
+		STATUS	current
+		DESCRIPTION
+			"
+            IP address of the Tunneled Node
+			"
+		::= { wlsxTunneledNodeRequestEntry 2 }
+
+	wlsxNumTunnels OBJECT-TYPE
+		SYNTAX 	Integer32
+		MAX-ACCESS read-only
+		STATUS	current
+		DESCRIPTION
+			"
+				Number of tunnels originating from Tunneled Node
+			"
+		::= { wlsxTunneledNodeRequestEntry 3 }
+
+     wlsxTunneledNodeType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    others(1),
+                    corvina(2)
+                }
+        MAX-ACCESS read-only
+        STATUS  current
+        DESCRIPTION
+            "
+                Device type of the tunnel
+            "
+        ::= { wlsxTunneledNodeRequestEntry 4 }
+
+
+END
diff --git a/MIBS/arubaos/WLSX-USER-MIB b/MIBS/arubaos/WLSX-USER-MIB
new file mode 100644
index 0000000..e16662b
--- /dev/null
+++ b/MIBS/arubaos/WLSX-USER-MIB
@@ -0,0 +1,730 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+   WLSX-USER-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+       Counter64,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+
+	   ArubaAuthenticationMethods,
+	   ArubaSubAuthenticationMethods,
+	   ArubaEncryptionType,
+	   ArubaPhyType,
+	   ArubaHTMode,
+       ArubaUserForwardMode
+	   		FROM ARUBA-TC
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB
+		wlanESSID
+			FROM WLSX-WLAN-MIB;
+
+   wlsxUserMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the users in an Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 4 }
+
+   wlsxUserAllInfoGroup         	OBJECT IDENTIFIER ::= { wlsxUserMIB 1 }
+
+-- wlsxUserAllInfoGroup contains information about the users in the controller.
+ 
+  wlsxTotalNumOfUsers OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of the users.
+            "
+  ::= { wlsxUserAllInfoGroup 1 }
+
+  wlsxUserTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxUserEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the users (both wired and wireless) currently
+			connected to the controller. Users are identified by their MAC 
+			address and IP address.
+		"
+	
+  ::= { wlsxUserAllInfoGroup 2 } 
+
+     wlsxUserEntry OBJECT-TYPE 
+	  SYNTAX       WlsxUserEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "User Entry"
+	  INDEX { nUserPhyAddress, nUserIpAddress }
+      ::= { wlsxUserTable 1 } 
+
+     WlsxUserEntry ::=
+     SEQUENCE {
+		nUserPhyAddress 				MacAddress,
+		nUserIpAddress					IpAddress,
+	 	nUserName						DisplayString,
+	 	nUserRole						DisplayString,
+	 	nUserUpTime						TimeTicks,
+	 	nUserAuthenticationMethod		ArubaAuthenticationMethods,
+	 	nUserSubAuthenticationMethod	ArubaSubAuthenticationMethods,
+	 	nUserAuthServerName				DisplayString,
+	 	nUserExtVPNAddress				IpAddress,
+	 	nUserApLocation					DisplayString,
+	 	nUserApBSSID					MacAddress,
+	 	nUserIsOnHomeAgent				TruthValue,
+	 	nUserHomeAgentIpAddress			IpAddress,
+	 	nUserMobilityStatus				INTEGER,
+	 	nUserHomeVlan					Integer32,
+	 	nUserDefaultVlan				Integer32,
+	 	nUserAssignedVlan				Integer32,
+	 	nUserBWContractName				DisplayString,
+	 	nUserBWContractUsage			INTEGER,
+	 	nUserBWContractId				Integer32,
+	 	nUserIsProxyArpEnabled			TruthValue,
+	 	nUserCurrentVlan				Integer32,
+		nUserIsWired                    TruthValue,
+		nUserConnectedSlot              Integer32,
+		nUserConnectedPort              Integer32,
+		nUserPhyType   				    ArubaPhyType,
+		nUserMobilityDomainName         DisplayString,
+	 	nUserUPBWContractName			DisplayString,
+	 	nUserUPBWContractUsage			INTEGER,
+	 	nUserUPBWContractId				Integer32,
+	 	nUserDNBWContractName			DisplayString,
+	 	nUserDNBWContractUsage			INTEGER,
+	 	nUserDNBWContractId				Integer32,
+		nUserHTMode   				    ArubaHTMode,
+        nUserForwardMode                ArubaUserForwardMode,
+		nUserEncryptionMethod			ArubaEncryptionType,
+		nUserDeviceID				    DisplayString,
+		nUserConnectedModule            Integer32,
+		nUserDeviceType				DisplayString,
+		nUserRxDataPkts64               Counter64,
+		nUserTxDataPkts64               Counter64,
+		nUserRxDataOctets64             Counter64,
+		nUserTxDataOctets64             Counter64,
+		nVIAUserDeviceID 				MacAddress
+     }
+
+     nUserPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+                MAC address of the station from which the user connected to
+                the controller.
+            "
+        ::= { wlsxUserEntry 1 }
+
+     nUserIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			IP Address of the user.
+            "
+        ::= { wlsxUserEntry 2 }
+
+     nUserName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..128))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Name of the User.
+            "
+        ::= { wlsxUserEntry 3 }
+
+     nUserRole OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Role configured for this user.
+            "
+        ::= { wlsxUserEntry 4 }
+		 
+     nUserUpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Time since the user connected to the controller.	
+            "
+        ::= { wlsxUserEntry 5 }
+
+     nUserAuthenticationMethod OBJECT-TYPE
+         SYNTAX       ArubaAuthenticationMethods
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Authentication mechanism used by the user to connect to the 
+			controller.
+            "
+        ::= { wlsxUserEntry 6 }
+
+     nUserSubAuthenticationMethod OBJECT-TYPE
+         SYNTAX       ArubaSubAuthenticationMethods
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Sub Authentication Method
+            "
+        ::= { wlsxUserEntry 7 }
+
+     nUserAuthServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the authentication server used to authenticate 
+			the user.
+            "
+        ::= { wlsxUserEntry 8 }
+
+     nUserExtVPNAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			External VPN IP Address, if this is a VPN user or 0.0.0.0 if not.
+            "
+        ::= { wlsxUserEntry 9 }
+
+     nUserApLocation OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the access point to 
+			which the user is associated.
+            "
+        ::= { wlsxUserEntry 10 }
+
+     nUserApBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the access point, which 
+			the user used to connect to the controller.
+            "
+        ::= { wlsxUserEntry 11 }
+
+     nUserIsOnHomeAgent OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			The Object will indicate if the controller is the home controller 
+			 for the user or not.
+            "
+        ::= { wlsxUserEntry 12 }
+
+     nUserHomeAgentIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			The Home agent IP Address of the user. If this user is already on 
+			the home controller, then this IP is the controller IP else it 
+			is the home controller IP address.
+			
+            "
+        ::= { wlsxUserEntry 13 }
+
+     nUserMobilityStatus OBJECT-TYPE
+         SYNTAX       INTEGER {
+		 				visitor(1),
+						away(2),
+						associated(3),
+						wired(4),
+                        wireless(5)
+		 				}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Mobility Status of the User.
+			
+            "
+        ::= { wlsxUserEntry 14 }
+
+     nUserHomeVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Home VLAN of the User. If the user is on the home controller 
+			 then this VLAN will be same as userDefaultVlan.
+            "
+        ::= { wlsxUserEntry 15 }
+
+     nUserDefaultVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Default VLAN of the User based on the AP configuration.
+            "
+        ::= { wlsxUserEntry 16 }
+
+     nUserAssignedVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Vlan will be different from the Default VLAN if the user has 
+			a derived VLAN Configuration.
+            "
+        ::= { wlsxUserEntry 17 }
+
+     nUserBWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Name of the Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxUserEntry 18 }
+
+     nUserBWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Indicates how the Bandwidth Contract is used.
+            "
+        ::= { wlsxUserEntry 19 }
+
+     nUserBWContractId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Bandwidth Contract Id Assigned to the User
+            "
+        ::= { wlsxUserEntry 20 }
+
+     nUserIsProxyArpEnabled OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object will indicate if the controller is proxy ARPing for the
+			user.
+            "
+        ::= { wlsxUserEntry 21 }
+
+     nUserCurrentVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The VLAN to which the user is currently bound.
+            "
+        ::= { wlsxUserEntry 22 }
+
+     nUserIsWired OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether this is a wired or wireless user.
+            "
+        ::= { wlsxUserEntry 23 }
+
+     nUserConnectedSlot OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The slot to which the user is connected, if wired.
+            "
+        ::= { wlsxUserEntry 24 }
+
+     nUserConnectedPort OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The port to which the user is connected, if wired.
+            "
+        ::= { wlsxUserEntry 25 }
+
+     nUserPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The wireless PHY type to which the user is associated, or 'wired'.
+            "
+        ::= { wlsxUserEntry 26 }
+
+     nUserMobilityDomainName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of mobility domain mobile user belongs to.
+            "
+        ::= { wlsxUserEntry 27 }
+
+     nUserUPBWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Upstream Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxUserEntry 28 }
+
+     nUserUPBWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the Upstream Bandwidth Contract is used.
+            "
+        ::= { wlsxUserEntry 29 }
+
+     nUserUPBWContractId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Upstream Bandwidth Contract Id Assigned to the User
+            "
+        ::= { wlsxUserEntry 30 }
+
+     nUserDNBWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Downstream Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxUserEntry 31 }
+
+     nUserDNBWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the Downstream Bandwidth Contract is used.
+            "
+        ::= { wlsxUserEntry 32 }
+
+     nUserDNBWContractId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Downstream Bandwidth Contract Id Assigned to the User
+            "
+        ::= { wlsxUserEntry 33 }
+
+     nUserHTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The HT mode of this user, if any.
+            "
+        ::= { wlsxUserEntry 34 }
+
+     nUserEncryptionMethod OBJECT-TYPE
+         SYNTAX       ArubaEncryptionType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Encryption method.
+            "
+        ::= { wlsxUserEntry 35 }
+ 
+     nUserForwardMode OBJECT-TYPE
+         SYNTAX       ArubaUserForwardMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			User mode.
+            "
+        ::= { wlsxUserEntry 36 }
+        
+     nUserDeviceID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..128))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Device ID
+            "
+        ::= { wlsxUserEntry 37 }
+
+     nUserConnectedModule OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The module to which the user is connected, if wired.
+
+            "
+        ::= { wlsxUserEntry 38 }
+
+     nUserDeviceType OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..31))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Device type
+            "
+        ::= { wlsxUserEntry 39 }
+
+     nUserRxDataPkts64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of packets received by this IP
+            for which this user is connected to the controller.
+            "
+         ::= { wlsxUserEntry 40 }
+
+     nUserTxDataPkts64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of packets transmitted by this IP
+            for which this user is connected to the controller.
+            "
+         ::= { wlsxUserEntry 41 }
+
+     nUserRxDataOctets64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of octets received by this IP
+            for which this user is connected to the controller.
+            "
+         ::= { wlsxUserEntry 42 }
+
+     nUserTxDataOctets64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of octets transmitted by this IP
+            for which this user is connected to the controller.
+            "
+        ::= { wlsxUserEntry 43 }
+
+    nVIAUserDeviceID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                MAC address of the station from which the user connected to
+                the controller using VIA.
+            "
+        ::= { wlsxUserEntry 44 }
+
+
+
+  wlsxUserSessionTimeTable OBJECT-TYPE
+	  SYNTAX		SEQUENCE OF WlsxUserSessionTimeEntry
+	  MAX-ACCESS	not-accessible
+	  STATUS		current
+	  DESCRIPTION
+	  "
+		This table lists the user session time counts on an ESSID.
+		ssid. The session times  are separated into predefined time length 
+		buckets, with sessions lasting longer than 240 minutes falling into 
+		the 240min bucket. 
+	  "
+  ::= { wlsxUserAllInfoGroup 3 }
+
+    wlsxUserSessionTimeEntry OBJECT-TYPE 
+	  SYNTAX       WlsxUserSessionTimeEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+        "
+		 User session time data, divided into buckets of different
+	     time length.         "
+			
+	  INDEX { wlanESSID, wlsxUserSessionTimeLength}
+	  ::= { wlsxUserSessionTimeTable 1 }
+ 
+	  WlsxUserSessionTimeEntry ::=
+      SEQUENCE {
+		 wlsxUserSessionTimeLength   Integer32,
+		 wlsxUserSessionTimeCount	 Counter32
+	  }
+
+     wlsxUserSessionTimeLength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			 Pre-defined user session time length.
+            "
+        ::= { wlsxUserSessionTimeEntry 1 }
+
+     wlsxUserSessionTimeCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of users that are connected to the essid whose sessions expired in this time interval.
+            "
+        ::= { wlsxUserSessionTimeEntry 2 }
+
+-- wlsxUserStatsGroup 
+-- This group lists the user count information based on the auth type
+
+  wlsxUserStatsGroup               OBJECT IDENTIFIER ::= { wlsxUserAllInfoGroup 4 }
+
+     wlsxNumOfUsers8021x    OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Number of 802.1x users.
+            "
+        ::= { wlsxUserStatsGroup 1 }
+
+     wlsxNumOfUsersVPN      OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of VPN users.
+            "
+        ::= { wlsxUserStatsGroup 2 }
+
+     wlsxNumOfUsersCP      OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of Captive Portal  users.
+            "
+        ::= { wlsxUserStatsGroup 3 }
+
+     wlsxNumOfUsersMAC      OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of MAC users.
+            "
+        ::= { wlsxUserStatsGroup 4 }
+
+     wlsxNumOfUsersStateful8021x      OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of stateful 802.1x users.
+            "
+        ::= { wlsxUserStatsGroup 5 }
+
+
+END
diff --git a/MIBS/arubaos/WLSX-USER6-MIB b/MIBS/arubaos/WLSX-USER6-MIB
new file mode 100644
index 0000000..6cd5dd7
--- /dev/null
+++ b/MIBS/arubaos/WLSX-USER6-MIB
@@ -0,0 +1,868 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+   WLSX-USER6-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+
+	   ArubaAuthenticationMethods,
+	   ArubaSubAuthenticationMethods,
+	   ArubaEncryptionType,
+	   ArubaPhyType,
+	   ArubaHTMode,
+	   ArubaUserForwardMode
+	   		FROM ARUBA-TC
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB
+		wlsxSwitchMIB
+			FROM WLSX-SWITCH-MIB
+		wlanESSID
+			FROM WLSX-WLAN-MIB;
+
+   wlsxUser6MIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the IPv6 users in an Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 14 }
+
+   wlsxUser6AllInfoGroup        OBJECT IDENTIFIER ::= { wlsxUser6MIB 1 }
+   wlsxUser6InfoGroup         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 4 }
+
+-- wlsxUser6AllInfoGroup contains information about the users in the controller.
+ 
+  wlsxTotalNumOfUsers6 OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of the users.
+            "
+  ::= { wlsxUser6AllInfoGroup 1 }
+
+  wlsxUser6Table  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxUser6Entry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the users (both wired and wireless) currently
+			connected to the controller. Users are identified by their MAC 
+			address and IP address.
+		"
+	
+  ::= { wlsxUser6AllInfoGroup 2 } 
+
+     wlsxUser6Entry OBJECT-TYPE 
+	  SYNTAX       WlsxUser6Entry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "User Entry"
+	  INDEX { nUser6PhyAddress, nUser6IpAddress }
+      ::= { wlsxUser6Table 1 } 
+
+     WlsxUser6Entry ::=
+     SEQUENCE {
+		nUser6PhyAddress 				MacAddress,
+		nUser6IpAddress					DisplayString,
+	 	nUser6Name						DisplayString,
+	 	nUser6Role						DisplayString,
+	 	nUser6UpTime					TimeTicks,
+	 	nUser6AuthenticationMethod		ArubaAuthenticationMethods,
+	 	nUser6SubAuthenticationMethod	ArubaSubAuthenticationMethods,
+	 	nUser6AuthServerName			DisplayString,
+	 	nUser6ExtVPNAddress				IpAddress,
+	 	nUser6ApLocation				DisplayString,
+	 	nUser6ApBSSID					MacAddress,
+	 	nUser6IsOnHomeAgent				TruthValue,
+	 	nUser6HomeAgentIpAddress		IpAddress,
+	 	nUser6MobilityStatus			INTEGER,
+	 	nUser6HomeVlan					Integer32,
+	 	nUser6DefaultVlan				Integer32,
+	 	nUser6AssignedVlan				Integer32,
+	 	nUser6BWContractName			DisplayString,
+	 	nUser6BWContractUsage			INTEGER,
+	 	nUser6BWContractId				Integer32,
+	 	nUser6IsProxyArpEnabled			TruthValue,
+	 	nUser6CurrentVlan				Integer32,
+		nUser6IsWired                   TruthValue,
+		nUser6ConnectedSlot             Integer32,
+		nUser6ConnectedPort             Integer32,
+		nUser6PhyType   				ArubaPhyType,
+		nUser6MobilityDomainName        DisplayString,
+	 	nUser6UPBWContractName			DisplayString,
+	 	nUser6UPBWContractUsage			INTEGER,
+	 	nUser6UPBWContractId			Integer32,
+	 	nUser6DNBWContractName			DisplayString,
+	 	nUser6DNBWContractUsage			INTEGER,
+	 	nUser6DNBWContractId			Integer32,
+		nUser6HTMode   				    ArubaHTMode,
+		nUser6DeviceID				DisplayString,
+		nUser6DeviceType			DisplayString,
+		nUser6ConnectedModule			Integer32,
+		nUser6RxDataPkts64			Counter64,
+		nUser6TxDataPkts64			Counter64,
+		nUser6RxDataOctets64			Counter64,
+		nUser6TxDataOctets64			Counter64,
+		nUser6ForwardMode			ArubaUserForwardMode,
+		nUser6EncryptionMethod			ArubaEncryptionType,
+		nVIAUser6DeviceID 				MacAddress
+     }
+
+     nUser6PhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+                MAC address of the station from which the user connected to
+                the controller.
+            "
+        ::= { wlsxUser6Entry 1 }
+
+     nUser6IpAddress OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..128))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			IPv6 Address of the user.
+            "
+        ::= { wlsxUser6Entry 2 }
+
+     nUser6Name OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..128))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Name of the User.
+            "
+        ::= { wlsxUser6Entry 3 }
+
+     nUser6Role OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Role configured for this user.
+            "
+        ::= { wlsxUser6Entry 4 }
+		 
+     nUser6UpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Time since the user connected to the controller.	
+            "
+        ::= { wlsxUser6Entry 5 }
+
+     nUser6AuthenticationMethod OBJECT-TYPE
+         SYNTAX       ArubaAuthenticationMethods
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Authentication mechanism used by the user to connect to the 
+			controller.
+            "
+        ::= { wlsxUser6Entry 6 }
+
+     nUser6SubAuthenticationMethod OBJECT-TYPE
+         SYNTAX       ArubaSubAuthenticationMethods
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Sub Authentication Method
+            "
+        ::= { wlsxUser6Entry 7 }
+
+     nUser6AuthServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the authentication server used to authenticate 
+			the user.
+            "
+        ::= { wlsxUser6Entry 8 }
+
+     nUser6ExtVPNAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			External VPN IP Address, if this is a VPN user or 0.0.0.0 if not.
+            "
+        ::= { wlsxUser6Entry 9 }
+
+     nUser6ApLocation OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the access point to 
+			which the user is associated.
+            "
+        ::= { wlsxUser6Entry 10 }
+
+     nUser6ApBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			BSSID of the access point, which 
+			the user used to connect to the controller.
+            "
+        ::= { wlsxUser6Entry 11 }
+
+     nUser6IsOnHomeAgent OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Object will indicate if the controller is the home controller 
+			 for the user or not.
+            "
+        ::= { wlsxUser6Entry 12 }
+
+     nUser6HomeAgentIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Home agent IP Address of the user. If this user is already on 
+			the home controller, then this IP is the controller IP else it 
+			is the home controller IP address.
+			
+            "
+        ::= { wlsxUser6Entry 13 }
+
+     nUser6MobilityStatus OBJECT-TYPE
+         SYNTAX       INTEGER {
+		 				visitor(1),
+						away(2),
+						associated(3),
+						wired(4),
+                        wireless(5)
+		 				}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Mobility Status of the User.
+			
+            "
+        ::= { wlsxUser6Entry 14 }
+
+     nUser6HomeVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Home VLAN of the User. If the user is on the home controller 
+			 then this VLAN will be same as userDefaultVlan.
+            "
+        ::= { wlsxUser6Entry 15 }
+
+     nUser6DefaultVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Default VLAN of the User based on the AP configuration.
+            "
+        ::= { wlsxUser6Entry 16 }
+
+     nUser6AssignedVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This Vlan will be different from the Default VLAN if the user has 
+			a derived VLAN Configuration.
+            "
+        ::= { wlsxUser6Entry 17 }
+
+     nUser6BWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Name of the Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxUser6Entry 18 }
+
+     nUser6BWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Indicates how the Bandwidth Contract is used.
+            "
+        ::= { wlsxUser6Entry 19 }
+
+     nUser6BWContractId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Bandwidth Contract Id Assigned to the User
+            "
+        ::= { wlsxUser6Entry 20 }
+
+     nUser6IsProxyArpEnabled OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This object will indicate if the controller is proxy ARPing for the
+			user.
+            "
+        ::= { wlsxUser6Entry 21 }
+
+     nUser6CurrentVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The VLAN to which the user is currently bound.
+            "
+        ::= { wlsxUser6Entry 22 }
+
+     nUser6IsWired OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether this is a wired or wireless user.
+            "
+        ::= { wlsxUser6Entry 23 }
+
+     nUser6ConnectedSlot OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The slot to which the user is connected, if wired.
+            "
+        ::= { wlsxUser6Entry 24 }
+
+     nUser6ConnectedPort OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The port to which the user is connected, if wired.
+            "
+        ::= { wlsxUser6Entry 25 }
+
+     nUser6PhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The wireless PHY type to which the user is associated, or 'wired'.
+            "
+        ::= { wlsxUser6Entry 26 }
+
+     nUser6MobilityDomainName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of mobility domain mobile user belongs to.
+            "
+        ::= { wlsxUser6Entry 27 }
+
+     nUser6UPBWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Upstream Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxUser6Entry 28 }
+
+     nUser6UPBWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the Upstream Bandwidth Contract is used.
+            "
+        ::= { wlsxUser6Entry 29 }
+
+     nUser6UPBWContractId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Upstream Bandwidth Contract Id Assigned to the User
+            "
+        ::= { wlsxUser6Entry 30 }
+
+     nUser6DNBWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Downstream Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxUser6Entry 31 }
+
+     nUser6DNBWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the Downstream Bandwidth Contract is used.
+            "
+        ::= { wlsxUser6Entry 32 }
+
+     nUser6DNBWContractId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Downstream Bandwidth Contract Id Assigned to the User
+            "
+        ::= { wlsxUser6Entry 33 }
+
+     nUser6HTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The HT mode of this user, if any.
+            "
+        ::= { wlsxUser6Entry 34 }
+
+     nUser6DeviceID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..128))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Device ID
+            "
+        ::= { wlsxUser6Entry 35 }
+
+     nUser6DeviceType OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..31))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Device Type
+            "
+        ::= { wlsxUser6Entry 36 }
+
+     nUser6ConnectedModule OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The module to which the user is connected, if wired.
+            "
+        ::= { wlsxUser6Entry 37 }
+
+     nUser6RxDataPkts64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of packets received by this IP
+            for which this user is connected to the controller.
+            "
+         ::= { wlsxUser6Entry 38 }
+
+     nUser6TxDataPkts64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of packets transmitted by this IP
+            for which this user is connected to the controller.
+            "
+         ::= { wlsxUser6Entry 39 }
+
+     nUser6RxDataOctets64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of octets received by this IP
+            for which this user is connected to the controller.
+            "
+         ::= { wlsxUser6Entry 40 }
+
+     nUser6TxDataOctets64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This object specifies number of octets transmitted by this IP
+            for which this user is connected to the controller.
+            "
+        ::= { wlsxUser6Entry 41 }
+
+     nUser6ForwardMode OBJECT-TYPE
+         SYNTAX       ArubaUserForwardMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Forward mode.
+            "
+        ::= { wlsxUser6Entry 42 }
+
+     nUser6EncryptionMethod OBJECT-TYPE
+         SYNTAX       ArubaEncryptionType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Encryption method.
+            "
+        ::= { wlsxUser6Entry 43 }
+
+     nVIAUser6DeviceID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                MAC address of the station from which the user connected to
+                the controller using VIA.
+            "
+        ::= { wlsxUser6Entry 44 }
+
+  wlsxUser6SessionTimeTable OBJECT-TYPE
+	  SYNTAX		SEQUENCE OF WlsxUser6SessionTimeEntry
+	  MAX-ACCESS	not-accessible
+	  STATUS		current
+	  DESCRIPTION
+	  "
+		This table lists the user session time counts on an ESSID.
+		ssid. The session times  are separated into predefined time length 
+		buckets, with sessions lasting longer than 240 minutes falling into 
+		the 240min bucket. 
+	  "
+  ::= { wlsxUser6AllInfoGroup 3 }
+
+    wlsxUser6SessionTimeEntry OBJECT-TYPE 
+	  SYNTAX       WlsxUser6SessionTimeEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+        "
+		 User session time data, divided into buckets of different
+	     time length.         "
+			
+	  INDEX { wlanESSID, wlsxUser6SessionTimeLength}
+	  ::= { wlsxUser6SessionTimeTable 1 }
+ 
+	  WlsxUser6SessionTimeEntry ::=
+      SEQUENCE {
+		 wlsxUser6SessionTimeLength   Integer32,
+		 wlsxUser6SessionTimeCount	 Counter32
+	  }
+
+     wlsxUser6SessionTimeLength OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			 Pre-defined user session time length.
+            "
+        ::= { wlsxUser6SessionTimeEntry 1 }
+
+     wlsxUser6SessionTimeCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of users that are connected to the essid whose sessions expired in this time interval.
+            "
+        ::= { wlsxUser6SessionTimeEntry 2 }
+
+   wlsxSwitchUser6Table  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF MxSwitchUser6Entry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the users (both wired and wireless) currently
+			connected to the switch. Users are identified by their IP address.
+		"
+	
+      ::= { wlsxUser6InfoGroup 1 } 
+
+     wlsxSwitchUser6Entry OBJECT-TYPE 
+	  SYNTAX       MxSwitchUser6Entry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "User Entry"
+	  INDEX { user6IpAddress}
+      ::= { wlsxSwitchUser6Table 1 } 
+
+     MxSwitchUser6Entry ::=
+     SEQUENCE {
+         user6IpAddress				DisplayString,
+         user6PhyAddress 			MacAddress,
+		 user6Name					DisplayString,
+		 user6Role					DisplayString,
+		 user6UpTime				TimeTicks,
+		 user6AuthenticationMethod	INTEGER,
+		 user6Location				DisplayString,
+		 user6ServerName			DisplayString,
+		 user6ConnectedVlan			Integer32,
+		 user6ConnectedSlot			Integer32,
+		 user6ConnectedPort			Integer32,
+		 user6BWContractName		DisplayString,
+		 user6BWContractUsage		INTEGER,
+		 user6ConnectedModule		Integer32
+
+     }
+
+     user6IpAddress OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			IPv6 Address from which the user connected to the switch.
+            "
+        ::= { wlsxSwitchUser6Entry 1 }
+
+     user6PhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Physical Address of the station from which the user connected to 
+			the switch.
+            "
+        ::= { wlsxSwitchUser6Entry 2 }
+
+     user6Name OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Name of the User.
+            "
+        ::= { wlsxSwitchUser6Entry 3 }
+
+     user6Role OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Role configured for this user.
+            "
+        ::= { wlsxSwitchUser6Entry 4 }
+
+		 
+     user6UpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Time since the user is connected to the switch.	
+            "
+        ::= { wlsxSwitchUser6Entry 5 }
+
+     user6AuthenticationMethod OBJECT-TYPE
+         SYNTAX       INTEGER {
+						none(1),
+						other(2),
+						web(3),
+						dot1x(4),
+						vpn(5),
+						mac(6)
+						}
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Authentication mechanism used by the user to connect to the switch.
+            "
+        ::= { wlsxSwitchUser6Entry 6 }
+
+     user6Location OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the access point (in Building.Floor.... format), which
+			the user used to connect to the switch.
+            "
+        ::= { wlsxSwitchUser6Entry 7 }
+
+     user6ServerName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Back-end authentication server, used to authenticate
+			the user.
+            "
+        ::= { wlsxSwitchUser6Entry 8 }
+
+     user6ConnectedVlan OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Vlan on which the user is connected to the switch.
+            "
+        ::= { wlsxSwitchUser6Entry 9 }
+
+     user6ConnectedSlot OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Slot on switch, where the user connection terminates.
+            "
+        ::= { wlsxSwitchUser6Entry 10 }
+
+     user6ConnectedPort OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port on switch, where the user connection terminates.
+            "
+        ::= { wlsxSwitchUser6Entry 11 }
+
+     user6BWContractName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Bandwidth Contract applied to this user.
+            "
+        ::= { wlsxSwitchUser6Entry 12 }
+
+     user6BWContractUsage OBJECT-TYPE
+         SYNTAX       INTEGER {
+							user(1),
+							shared(2)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates how the Bandwidth Contract is used.
+            "
+        ::= { wlsxSwitchUser6Entry 13 }
+
+     user6ConnectedModule OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Module on switch, where the user connection terminates.
+            "
+        ::= { wlsxSwitchUser6Entry 14 }
+
+
+END
diff --git a/MIBS/arubaos/WLSX-VOICE-MIB b/MIBS/arubaos/WLSX-VOICE-MIB
new file mode 100644
index 0000000..d97786e
--- /dev/null
+++ b/MIBS/arubaos/WLSX-VOICE-MIB
@@ -0,0 +1,1008 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+WLSX-VOICE-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+       
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+       DateAndTime,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+           
+       ArubaEnableValue,
+	   ArubaVlanValidRange,
+	   ArubaVoiceCacBit,
+	   ArubaVoiceCdrDirection,
+	   ArubaVoipRegState,
+	   ArubaVoipProtocol,
+	   ArubaCallStates
+	   		FROM ARUBA-TC
+	   wlanStaPhyAddress,
+	   wlanAPMacAddress, 
+	   wlanAPRadioNumber, 
+	   wlanAPBSSID
+           FROM WLSX-WLAN-MIB
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxVoiceMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about Voice call status and call detail reporting
+		in the Aruba controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 12 }
+
+   wlsxVoiceStatsGroup          OBJECT IDENTIFIER ::= { wlsxVoiceMIB 1 }
+
+   wlsxVoiceCdrInfoGroup     	OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 1 }
+   wlsxVoiceCallCtrsGroup		OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 2 }
+   wlsxVoiceClientInfoGroup     OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 3 }
+   wlsxVoiceCallCtrPerClientInfoGroup	OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 4 }
+   wlsxVoiceClientLocationInfoGroup     OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 5 }
+
+   wlsxVoiceCdrTotal  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of CDR info in the controller.
+            "
+        ::= { wlsxVoiceCdrInfoGroup 1 }
+
+   wlsxVoiceCdrTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF VoiceCdrEntry
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table lists Call Detail Record Info. 
+		"
+      ::= { wlsxVoiceCdrInfoGroup 2 } 
+      
+      
+   wlsxVoiceCdrEntry OBJECT-TYPE
+	  SYNTAX       VoiceCdrEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             ""
+	  INDEX {voiceCdrId}
+      ::= { wlsxVoiceCdrTable 1 } 
+      
+
+--- Based on voip_mgr.h:voip_sip_call_cdr_t
+   VoiceCdrEntry ::=
+     SEQUENCE {
+	voiceCdrId				Unsigned32,
+	voiceCdrIp				IpAddress,
+	voiceCdrMac				MacAddress,
+	voiceCdrName				DisplayString,
+	voiceCdrDialNum			DisplayString,
+	voiceCdrDir				ArubaVoiceCdrDirection,
+	voiceCdrOrigTime			Unsigned32,
+	voiceCdrSetupTime			Unsigned32,
+	voiceCdrTeardownTime			Unsigned32,
+	voiceCdrStatus			ArubaCallStates,
+	voiceCdrReason			DisplayString,
+	voiceCdrDuration			Integer32,
+	voiceCdrRValueA			Integer32,
+	voiceCdrApSwitchDelay		Integer32,
+	voiceCdrCodec			Integer32,
+	voiceCdrApName			DisplayString,
+	voiceCdrApMac			MacAddress,
+	voiceCdrBssid			DisplayString,
+	voiceCdrEssid			DisplayString,
+	voiceCdrHandovers			Integer32,
+	voiceCdrMOS				DisplayString,
+	voiceCdrDelayA           DisplayString,
+	voiceCdrJitterA			DisplayString,
+	voiceCdrPktLossA			DisplayString,
+	voiceCdrRValueC			Integer32,
+	voiceCdrDelayC           DisplayString,
+	voiceCdrJitterC			DisplayString,
+	voiceCdrPktLossC			DisplayString
+    }
+   	voiceCdrId OBJECT-TYPE
+         SYNTAX       Unsigned32
+  		 MAX-ACCESS   not-accessible		
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR id
+            "
+        ::= { wlsxVoiceCdrEntry 1 }
+        
+   	voiceCdrIp OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR IP
+            "
+        ::= { wlsxVoiceCdrEntry 2 }
+        
+   	voiceCdrMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR MAC
+            "
+        ::= { wlsxVoiceCdrEntry 3 }
+        
+   	voiceCdrName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Name
+            "
+        ::= { wlsxVoiceCdrEntry 4 }
+        
+   	voiceCdrDialNum OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR dialed number
+            "
+        ::= { wlsxVoiceCdrEntry 5 }
+        
+   	voiceCdrDir OBJECT-TYPE
+         SYNTAX       ArubaVoiceCdrDirection
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR direction incoming or outgoing
+            "
+        ::= { wlsxVoiceCdrEntry 6 }
+        
+   	voiceCdrOrigTime OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR orig time
+            "
+        ::= { wlsxVoiceCdrEntry 7 }
+
+   	voiceCdrSetupTime OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Voice CDR setup time
+            "
+        ::= { wlsxVoiceCdrEntry 8 }
+
+   	voiceCdrTeardownTime OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Voice CDR teardown number
+            "
+        ::= { wlsxVoiceCdrEntry 9 }
+
+   	voiceCdrStatus OBJECT-TYPE
+         SYNTAX       ArubaCallStates
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Status
+            "
+        ::= { wlsxVoiceCdrEntry 10 }
+
+   	voiceCdrReason OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Reason
+            "
+        ::= { wlsxVoiceCdrEntry 11 }
+
+   	voiceCdrDuration OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Duration
+            "
+        ::= { wlsxVoiceCdrEntry 12 }
+
+   	voiceCdrRValueA OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR R-Value
+            "
+        ::= { wlsxVoiceCdrEntry 13 }
+
+   	voiceCdrApSwitchDelay OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Voice CDR AP switch delay
+            "
+        ::= { wlsxVoiceCdrEntry 14 }
+
+   	voiceCdrCodec OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR codec
+            "
+        ::= { wlsxVoiceCdrEntry 15 }
+
+   	voiceCdrApName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR AP Name
+            "
+        ::= { wlsxVoiceCdrEntry 16 }
+
+   	voiceCdrApMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR AP MAC Address
+            "
+        ::= { wlsxVoiceCdrEntry 17 }
+
+   	voiceCdrBssid OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR BSSID
+            "
+        ::= { wlsxVoiceCdrEntry 18 }
+
+   	voiceCdrEssid OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR ESSID
+            "
+        ::= { wlsxVoiceCdrEntry 19 }
+
+   	voiceCdrHandovers OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR client handovers AKA mobility rate
+            "
+        ::= { wlsxVoiceCdrEntry 20 }
+
+
+   	voiceCdrMOS OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR MOS
+            "
+        ::= { wlsxVoiceCdrEntry 21 }
+		
+	voiceCdrDelayA OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Delay at AP
+            "
+        ::= { wlsxVoiceCdrEntry 22 }
+	
+	voiceCdrJitterA OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Jitter at AP
+            "
+        ::= { wlsxVoiceCdrEntry 23 }
+		
+	voiceCdrPktLossA OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR packet loss at AP
+            "
+        ::= { wlsxVoiceCdrEntry 24 }
+		
+	voiceCdrRValueC OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR R-Value
+            "
+        ::= { wlsxVoiceCdrEntry 25 }
+
+	voiceCdrDelayC OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Delay at Controller
+            "
+        ::= { wlsxVoiceCdrEntry 26 }
+	
+	voiceCdrJitterC OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR Jitter at Controller
+            "
+        ::= { wlsxVoiceCdrEntry 27 }
+		
+	voiceCdrPktLossC OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice CDR packet loss at Controller
+            "
+        ::= { wlsxVoiceCdrEntry 28 }	
+--
+-- end VoiceCdrEntry
+--
+
+
+
+--
+-- begin scalar counters
+--
+   voiceCallCtrsTotal  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 1 }
+
+   voiceCallCtrsSuccess  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of successful calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 2 }
+
+   voiceCallCtrsFailed  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of failed calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 3 }
+
+   voiceCallCtrsRejected  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of rejected calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 4 }
+
+   voiceCallCtrsAborted  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of aborted calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 5 }
+
+   voiceCallCtrsOrig  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of originated calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 6 }
+
+   voiceCallCtrsRecvd  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total number of received calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 7 }
+
+   voiceCallCtrsActive  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total number of active calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 8 }
+
+   voiceCallCtrsNotFnd  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of not found calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 9 }
+
+   voiceCallCtrsBusy  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of busy calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 10 }
+
+   voiceCallCtrsSvc  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of service unavailable calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 11 }
+
+   voiceCallCtrsReqTerm  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of request terminated calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 12 }
+
+   voiceCallCtrsDecline  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of declined calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 13 }
+
+   voiceCallCtrsUnauth  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of unauthorized calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 14 }
+
+   voiceCallCtrsMisc  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Total number of miscellaneous calls.
+            "
+        ::= { wlsxVoiceCallCtrsGroup 15 }
+--
+-- end scalar counters
+--
+
+
+--
+-- begin voice client
+--
+   wlsxVoiceClientTotal  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of Active client sessions in the controller.
+            "
+        ::= { wlsxVoiceClientInfoGroup 1 }
+
+
+   wlsxVoiceClientTable  OBJECT-TYPE
+		SYNTAX       SEQUENCE OF VoiceClientEntry 
+        MAX-ACCESS   not-accessible		
+        STATUS       current 
+        DESCRIPTION 
+	  	"
+			This table lists all voice client Info
+		"
+      ::= { wlsxVoiceClientInfoGroup 2 } 
+      
+   wlsxVoiceClientEntry OBJECT-TYPE 
+	  SYNTAX       VoiceClientEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             ""
+	  INDEX {wlanStaPhyAddress }
+      ::= { wlsxVoiceClientTable 1 } 
+
+      
+
+--- Based on voip_cac.h:voip_client struct
+   VoiceClientEntry ::=
+	SEQUENCE {
+		voiceClientIp			IpAddress,
+		voiceClientProtocol			DisplayString,  
+		voiceClientRegState			DisplayString,
+		voiceClientContactName		DisplayString,
+		voiceClientServerName		DisplayString,
+		voiceClientEssid			DisplayString,
+		voiceClientVlanId			ArubaVlanValidRange,
+		voiceClientTunnelId			Integer32,
+		voiceClientAvgDelay			DisplayString,
+		voiceClientAvgJitter		DisplayString,
+		voiceClientAvgPktLoss		DisplayString,
+		voiceClientAvgCallDuration	Integer32
+    }
+
+   	voiceClientIp OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client IP Address 
+            "
+        ::= { wlsxVoiceClientEntry 1 }
+
+   	voiceClientProtocol OBJECT-TYPE
+         SYNTAX       DisplayString 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client protocol used
+            "
+        ::= { wlsxVoiceClientEntry 2 }
+
+   	voiceClientRegState OBJECT-TYPE
+         SYNTAX       DisplayString 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client state
+            "
+        ::= { wlsxVoiceClientEntry 3 }
+
+   	voiceClientContactName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client contact name
+            "
+        ::= { wlsxVoiceClientEntry 4 }
+
+   	voiceClientServerName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client Server name
+            "
+        ::= { wlsxVoiceClientEntry 5 }
+
+   	voiceClientEssid OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client ESSID
+            "
+        ::= { wlsxVoiceClientEntry 6 }
+
+   	voiceClientVlanId OBJECT-TYPE
+         SYNTAX       ArubaVlanValidRange
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Voice client VLAN id 
+            "
+        ::= { wlsxVoiceClientEntry 7 }
+
+   	voiceClientTunnelId OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			Voice client tunnel ID
+            "
+        ::= { wlsxVoiceClientEntry 8 }
+		
+	voiceClientAvgDelay OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client Avg Delay
+            "
+        ::= { wlsxVoiceClientEntry 9 }
+		
+	voiceClientAvgJitter OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client average Jitter
+            "
+        ::= { wlsxVoiceClientEntry 10 }
+		
+	voiceClientAvgPktLoss OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client average packet loss
+            "
+        ::= { wlsxVoiceClientEntry 11 }
+		
+	voiceClientAvgCallDuration OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client avg call duration
+            "
+        ::= { wlsxVoiceClientEntry 12 }
+		
+
+--
+-- end voiceClientEntry
+--
+
+--
+-- begin voice call counter per client entry
+--
+
+      
+   wlsxVoiceCallCtrPerClientTotal  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total number voice clients.
+            "
+        ::= { wlsxVoiceCallCtrPerClientInfoGroup 1 }
+
+   wlsxVoiceCallCtrPerClientTable  OBJECT-TYPE
+		SYNTAX       SEQUENCE OF VoiceCallCtrPerClientEntry 
+        MAX-ACCESS   not-accessible		
+        STATUS       current 
+        DESCRIPTION 
+	  	"
+			This table lists all voice client Location Info
+		"
+      ::= { wlsxVoiceCallCtrPerClientInfoGroup 2 } 
+      
+   wlsxVoiceCallCtrPerClientEntry OBJECT-TYPE 
+	  SYNTAX       VoiceCallCtrPerClientEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             ""
+	  INDEX { wlanStaPhyAddress }
+      ::= { wlsxVoiceCallCtrPerClientTable 1 } 
+
+
+   VoiceCallCtrPerClientEntry ::=
+	SEQUENCE {
+		voiceCallCtrTotal          Unsigned32,
+		voiceCallCtrSuccess	    Unsigned32,  
+		voiceCallCtrFailed	  		Unsigned32,
+		voiceCallCtrRejected	    Unsigned32,
+		voiceCallCtrAborted  	    Unsigned32,
+		voiceCallCtrOrig	        Unsigned32,
+		voiceCallCtrRecvd	        Unsigned32,
+		voiceCallCtrActive	        Unsigned32
+    }
+
+   	voiceCallCtrTotal OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total calls made by client 
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 1 }
+
+   	voiceCallCtrSuccess OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total successful calls made by client 
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 2 }
+
+   	voiceCallCtrFailed OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total failed calls made by client 
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 3 }
+
+   	voiceCallCtrRejected OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total calls rejected by client
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 4 }
+
+   	voiceCallCtrAborted OBJECT-TYPE
+         SYNTAX       Unsigned32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total calls aborted by client 
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 5 }
+
+   	voiceCallCtrOrig OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total call originated by client
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 6 }
+
+   	voiceCallCtrRecvd OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total calls received by client 
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 7 }
+		
+	voiceCallCtrActive OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice total currently aactive calls by client
+            "
+        ::= { wlsxVoiceCallCtrPerClientEntry 8 }
+
+--
+-- end call counter per client entry
+
+--
+
+--
+-- begin voice client location entry
+--
+
+   wlsxVoiceClientLocationTotal  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of Active voice clients in the controller.
+            "
+        ::= { wlsxVoiceClientLocationInfoGroup 1 }
+
+   wlsxVoiceClientLocationTable  OBJECT-TYPE
+		SYNTAX       SEQUENCE OF VoiceClientLocationEntry 
+        MAX-ACCESS   not-accessible		
+        STATUS       current 
+        DESCRIPTION 
+	  	"
+			This table lists all voice client Location Info
+		"
+      ::= { wlsxVoiceClientLocationInfoGroup 2 } 
+      
+   wlsxVoiceClientLocationEntry OBJECT-TYPE 
+	  SYNTAX       VoiceClientLocationEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             ""
+	  INDEX { wlanStaPhyAddress }
+      ::= { wlsxVoiceClientLocationTable 1 } 
+
+
+   VoiceClientLocationEntry ::=
+	SEQUENCE {
+		vcLocationIp          IpAddress,
+		vcLocationMac	      MacAddress,  
+		vcLocationSwitchIp	  IpAddress,
+		vcLocationApName	  DisplayString,
+		vcLocationApMac  	  MacAddress,
+		vcLocationApMode	  Integer32,
+		vcLocationApLoc	      DisplayString
+    }
+
+   	vcLocationIp OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client IP Address 
+            "
+        ::= { wlsxVoiceClientLocationEntry 1 }
+
+   	vcLocationMac OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client Mac Address 
+            "
+        ::= { wlsxVoiceClientLocationEntry 2 }
+
+   	vcLocationSwitchIp OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice Client Switch IP Address 
+            "
+        ::= { wlsxVoiceClientLocationEntry 3 }
+
+   	vcLocationApName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice Client AP Name
+            "
+        ::= { wlsxVoiceClientLocationEntry 4 }
+
+   	vcLocationApMac OBJECT-TYPE
+         SYNTAX       MacAddress 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client AP Mac Address 
+            "
+        ::= { wlsxVoiceClientLocationEntry 5 }
+
+   	vcLocationApMode OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client AP Mode
+            "
+        ::= { wlsxVoiceClientLocationEntry 6 }
+
+   	vcLocationApLoc OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Voice client Ap Location 
+            "
+        ::= { wlsxVoiceClientLocationEntry 7 }
+--
+-- end voice client location entry 
+--
+        
+END        
diff --git a/MIBS/arubaos/WLSX-WLAN-MIB b/MIBS/arubaos/WLSX-WLAN-MIB
new file mode 100644
index 0000000..cb083df
--- /dev/null
+++ b/MIBS/arubaos/WLSX-WLAN-MIB
@@ -0,0 +1,6231 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4: 
+WLSX-WLAN-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+       TEXTUAL-CONVENTION FROM SNMPv2-TC 
+
+       MODULE-IDENTITY,
+       OBJECT-TYPE,
+       snmpModules,
+       Integer32,
+       Unsigned32,
+	   Counter32,
+	   IpAddress,
+	   NOTIFICATION-TYPE
+           FROM SNMPv2-SMI
+
+       TDomain,
+       DisplayString,
+       PhysAddress,
+       TAddress,
+       TimeInterval,
+       RowStatus,
+       StorageType,
+       TestAndIncr,
+	   MacAddress,
+	   TruthValue
+           FROM SNMPv2-TC
+
+       ifIndex
+           FROM RFC1213-MIB
+
+	   ArubaEnableValue,
+	   ArubaFrameType,
+	   ArubaActiveState,
+	   ArubaRogueApType,
+	   ArubaAuthenticationMethods,
+	   ArubaEncryptionMethods,
+	   ArubaPhyType,
+	   ArubaVoipProtocolType,
+	   ArubaVlanValidRange,
+	   ArubaAccessPointMode,
+	   ArubaAPStatus,
+	   ArubaEnet1Mode,
+	   ArubaUnprovisionedStatus,
+	   ArubaMonitorMode,
+	   ArubaAntennaSetting,
+       ArubaMeshRole,
+	   ArubaHTMode,
+	   ArubaPortSpeed,
+	   ArubaHTExtChannel
+	   		FROM ARUBA-TC
+
+       OBJECT-GROUP
+           FROM SNMPv2-CONF
+		wlsxEnterpriseMibModules
+			FROM ARUBA-MIB;
+
+   wlsxWlanMIB MODULE-IDENTITY 
+       LAST-UPDATED "202008141745Z"
+       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+       CONTACT-INFO
+            "Postal:    3333 Scott Blvd,
+                        Santa Clara, CA 95054
+            E-mail:     aruba-ext-eng-reg@hpe.com
+            Phone:      408 227 4500
+            Fax:        408 752 0626"
+       DESCRIPTION
+           "This MIB module defines MIB objects which provide
+            information about the Wireless Management System (WMS) in the 
+			Aruba Controller."
+       REVISION        "202008141745Z"
+       DESCRIPTION
+           "The initial revision."
+       ::= { wlsxEnterpriseMibModules 5 }
+
+   wlsxWlanConfigGroup     	OBJECT IDENTIFIER ::= { wlsxWlanMIB 1 }
+   wlsxWlanStateGroup     	OBJECT IDENTIFIER ::= { wlsxWlanMIB 2 }
+   wlsxWlanStatsGroup     	OBJECT IDENTIFIER ::= { wlsxWlanMIB 3 }
+   wlsxRAPTraps                 OBJECT IDENTIFIER ::= { wlsxWlanMIB 100 }
+
+-- wlsxWlanAccessPointInfoGroup contains a Local Access Point Information Table.
+-- which lists all the APs connected to the controller, a Global AP Info Table
+-- which lists all the APs in the Aruba Domain. The Global table is valid only
+-- on the Master controller. The Group also contains two scalar objects which 
+-- indicate the total number of APs and the total number of Clients connected.
+
+   wlsxWlanAccessPointInfoGroup  OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 1 }
+   wlsxWlanStationInfoGroup  OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 2 }
+   wlsxWlanAssociationInfoGroup  OBJECT IDENTIFIER ::= { wlsxWlanStateGroup 3 }
+   wlsxWlanAccessPointStatsGroup  OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 1 }
+   wlsxWlanStationStatsGroup  OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 2 }
+   wlsxWlanSwitchStatsGroup  OBJECT IDENTIFIER ::= { wlsxWlanStatsGroup 3 }
+   wlsxSSIDConfigGroup  OBJECT IDENTIFIER ::= { wlsxWlanConfigGroup 1 }
+   wlsxAPConfigGroup  OBJECT IDENTIFIER ::= { wlsxWlanConfigGroup 2 }
+
+   wlsxWlanTotalNumAccessPoints  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of Access Points connected to the controller.
+            "
+        ::= { wlsxWlanAccessPointInfoGroup 1 }
+
+   wlsxWlanTotalNumStationsAssociated  OBJECT-TYPE 
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Total Number of Stations Associated to the controller.
+            "
+        ::= { wlsxWlanAccessPointInfoGroup 2 }
+
+-- AP Group Table
+   wlsxWlanAPGroupTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanAPGroupEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the Access Points Groups configured in the 
+			Aruba controller. 
+		"
+      ::= { wlsxWlanAccessPointInfoGroup 3 } 
+
+   wlsxWlanAPGroupEntry OBJECT-TYPE 
+	  SYNTAX       WlanAPGroupEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "AP Group Entry"
+	  INDEX {wlanAPGroup}
+      ::= { wlsxWlanAPGroupTable 1 } 
+
+   WlanAPGroupEntry ::=
+     SEQUENCE {
+         wlanAPGroup	DisplayString,
+		 wlanAPNumAps		Integer32
+   }
+
+    wlanAPGroup OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The name of an AP group
+            "
+        ::= { wlsxWlanAPGroupEntry 1 }
+
+   	wlanAPNumAps OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of APs in the AP Group
+            "
+        ::= { wlsxWlanAPGroupEntry 2 }
+
+
+ -- AP Table
+
+   wlsxWlanAPTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanAPEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table lists all the Access Points connected to the 
+			controller. 
+		"
+      ::= { wlsxWlanAccessPointInfoGroup 4 } 
+
+   wlsxWlanAPEntry OBJECT-TYPE 
+	  SYNTAX       WlanAPEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Access Point Entry"
+	  INDEX {wlanAPMacAddress}
+      ::= { wlsxWlanAPTable 1 } 
+
+   WlanAPEntry ::=
+     SEQUENCE {
+         wlanAPMacAddress			MacAddress,
+		 wlanAPIpAddress			IpAddress,
+		 wlanAPName					DisplayString,
+		 wlanAPGroupName			DisplayString,
+		 wlanAPModel				OBJECT IDENTIFIER,
+		 wlanAPSerialNumber			DisplayString,
+		 wlanAPdot11aAntennaGain	Integer32,
+		 wlanAPdot11gAntennaGain	Integer32,
+		 wlanAPNumRadios			Integer32,
+		 wlanAPEnet1Mode			ArubaEnet1Mode,
+		 wlanAPIpsecMode			ArubaEnableValue,
+		 wlanAPUpTime				TimeTicks,
+		 wlanAPModelName			DisplayString,
+		 wlanAPLocation			    DisplayString,
+		 wlanAPBuilding				Integer32,
+		 wlanAPFloor				Integer32,
+		 wlanAPLoc					Integer32,
+		 wlanAPExternalAntenna		ArubaAntennaSetting,
+		 wlanAPStatus				ArubaAPStatus,
+		 wlanAPNumBootstraps		Integer32,
+		 wlanAPNumReboots			Integer32,
+		 wlanAPUnprovisioned        ArubaUnprovisionedStatus,
+		 wlanAPMonitorMode          ArubaMonitorMode,
+		 wlanAPFQLNBuilding			DisplayString,
+		 wlanAPFQLNFloor			DisplayString,
+		 wlanAPFQLN					DisplayString,
+		 wlanAPFQLNCampus			DisplayString,
+		 wlanAPLongitude   			DisplayString,
+		 wlanAPLatitude    			DisplayString,
+		 wlanAPAltitude    			DisplayString,
+		 wlanAPMeshRole             ArubaMeshRole,
+         wlanAPSysLocation          DisplayString,
+         wlanAPHwVersion            DisplayString,
+         wlanAPSwVersion            DisplayString,
+         wlanAPNumWarmReboots       Integer32,
+         wlanAPOuterIpAddress       IpAddress,
+         wlanAPRemoteLanIpAddress   IpAddress,
+         wlanAPActiveUplink         INTEGER,
+         wlanAPSwitchIpAddress      IpAddress,
+         wlanAPStandbyIpAddress     IpAddress,
+         wlanAPConnectedAsStandby   INTEGER,
+         wlanAPServiceTag           DisplayString,
+         wlanAPConnectedAsDatazone  INTEGER,
+		 wlanAPIpv6Address 			DisplayString(SIZE(0..45)),
+         wlanAPFlexRadioMode        ArubaFlexRadioMode,
+         wlanAPdot11aAntennaGain10x	Integer32,
+         wlanAPdot11gAntennaGain10x	Integer32,
+         wlanAPDual5GMode           ArubaEnableValue,
+         wlanAPActiveIpAddress      DisplayString(SIZE(0..45)),
+         wlanAPSplit5GMode          ArubaSplit5GMode
+   }
+
+   	wlanAPMacAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			Ethernet MAC Address of the Access Point
+            "
+        ::= { wlsxWlanAPEntry 1 }
+
+   	wlanAPIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			IP Address of the Access Point
+            "
+        ::= { wlsxWlanAPEntry 2 }
+
+	wlanAPName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Host name of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 3 }
+
+	wlanAPGroupName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Group Name of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 4 }
+
+   	wlanAPModel	OBJECT-TYPE
+         SYNTAX       OBJECT IDENTIFIER
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 Sys OID of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 5 }
+
+   	wlanAPSerialNumber	OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..32))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Serial Number of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 6 }
+
+   	wlanAPdot11aAntennaGain	OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Configured antenna  gain for 'A' Radio.
+            "
+        ::= { wlsxWlanAPEntry 7 }
+
+   	wlanAPdot11gAntennaGain	OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Configured antenna  gain for 'G' Radio.
+            "
+        ::= { wlsxWlanAPEntry 8 }
+
+   	wlanAPNumRadios	OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of Radios in the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 9 }
+
+   	wlanAPEnet1Mode OBJECT-TYPE
+         SYNTAX       ArubaEnet1Mode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Enet1 Mode of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 10 }
+
+   	wlanAPIpsecMode OBJECT-TYPE
+         SYNTAX       ArubaEnableValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			IPSEC Mode of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 11 }
+
+   	wlanAPUpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time (in hundredths of seconds) since the last time the Access
+			 Point bootstrapped with the controller.
+            "
+        ::= { wlsxWlanAPEntry 12 }
+
+	wlanAPModelName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Model name of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 13 }
+
+	wlanAPLocation OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Location of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 14 }
+
+	wlanAPBuilding OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Building Number.
+            "
+        ::= { wlsxWlanAPEntry 15 }
+
+	wlanAPFloor OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Floor Number.
+            "
+        ::= { wlsxWlanAPEntry 16 }
+
+	wlanAPLoc OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Location.
+            "
+        ::= { wlsxWlanAPEntry 17 }
+
+	wlanAPExternalAntenna OBJECT-TYPE
+         SYNTAX       ArubaAntennaSetting
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Antenna Status.
+            "
+        ::= { wlsxWlanAPEntry 18 }
+
+	wlanAPStatus OBJECT-TYPE
+         SYNTAX       ArubaAPStatus
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Status.
+            "
+        ::= { wlsxWlanAPEntry 19 }
+
+	wlanAPNumBootstraps OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of times the AP has bootstrapped with the controller.
+            "
+        ::= { wlsxWlanAPEntry 20 }
+
+	wlanAPNumReboots OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Number of times the AP has rebooted.
+            "
+        ::= { wlsxWlanAPEntry 21 }
+
+	wlanAPUnprovisioned OBJECT-TYPE
+         SYNTAX       ArubaUnprovisionedStatus
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether the AP is unprovisioned due to lack of
+			 antenna gain or location code settings.
+            "
+        ::= { wlsxWlanAPEntry 22 }
+
+	wlanAPMonitorMode OBJECT-TYPE
+         SYNTAX       ArubaMonitorMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether any radio on this AP is acting as an
+			 air monitor.
+            "
+        ::= { wlsxWlanAPEntry 23 }
+
+	wlanAPFQLNBuilding OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The building component of the AP's FQLN.
+            "
+        ::= { wlsxWlanAPEntry 24 }
+
+	wlanAPFQLNFloor OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The floor component of the AP's FQLN.
+            "
+        ::= { wlsxWlanAPEntry 25 }
+
+	wlanAPFQLN OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			The AP's Fully Qualified Location Name (FQLN).
+            "
+        ::= { wlsxWlanAPEntry 26 }
+
+	wlanAPFQLNCampus OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The campus component of the AP's FQLN.
+            "
+        ::= { wlsxWlanAPEntry 27 }
+
+	wlanAPLongitude OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Longitude of the AP. Signed floating-point value.
+            "
+        ::= { wlsxWlanAPEntry 28 }
+
+	wlanAPLatitude OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Latitude of the AP. Signed floating-point value.
+            "
+        ::= { wlsxWlanAPEntry 29 }
+
+	wlanAPAltitude OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Altitude of the AP. Signed floating-point value.
+            "
+        ::= { wlsxWlanAPEntry 30 }
+
+	wlanAPMeshRole OBJECT-TYPE
+         SYNTAX       ArubaMeshRole
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Mesh role
+            "
+        ::= { wlsxWlanAPEntry 31 }
+        
+	wlanAPSysLocation OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP sysLocation
+            "
+        ::= { wlsxWlanAPEntry 32 }
+        
+    wlanAPHwVersion OBJECT-TYPE
+         SYNTAX       DisplayString  (SIZE(1..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        Hardware version of the AP.
+            "
+        ::= { wlsxWlanAPEntry 33 }
+ 
+    wlanAPSwVersion OBJECT-TYPE
+         SYNTAX       DisplayString  (SIZE(1..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        Software version of the AP.
+            "
+        ::= { wlsxWlanAPEntry 34 }
+
+        wlanAPNumWarmReboots OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        Number of times the AP has warm-rebooted.
+            "
+        ::= { wlsxWlanAPEntry 35 }
+
+         wlanAPOuterIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        Outer IP Address of the Access Point.
+            "
+        ::= { wlsxWlanAPEntry 36 }
+
+        wlanAPRemoteLanIpAddress OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        LAN IP Address of the Remote Access Point.
+            "
+        ::= { wlsxWlanAPEntry 37 }
+
+        wlanAPActiveUplink OBJECT-TYPE
+         SYNTAX       INTEGER {
+                                  ethernet(1),
+                                  usb(2),
+                                  pppoe(3)
+                             }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        Uplink of the RAP(Ethernet or USB).
+            "
+        ::= { wlsxWlanAPEntry 38 }
+
+        wlanAPSwitchIpAddress OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Access points' Serving Controller's IP Address.
+            "
+        ::= { wlsxWlanAPEntry 39 }
+
+        wlanAPStandbyIpAddress OBJECT-TYPE
+        SYNTAX       IpAddress
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Access points' Standby Controller's IP Address.
+            "
+        ::= { wlsxWlanAPEntry 40 }
+
+        wlanAPConnectedAsStandby OBJECT-TYPE
+        SYNTAX       INTEGER {
+                                 active(0),
+                                 standby(1)
+                             }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Access point connected as active/standby.
+            "
+        ::= { wlsxWlanAPEntry 41 }
+
+        wlanAPServiceTag OBJECT-TYPE
+        SYNTAX       DisplayString  (SIZE(1..64))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Access point service tag.
+            "
+        ::= { wlsxWlanAPEntry 42 }
+
+        wlanAPConnectedAsDatazone OBJECT-TYPE
+        SYNTAX       INTEGER(0..4)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        This object indicate this AP comes from datazone(1-4) or primary zone(0)
+            "
+        ::= { wlsxWlanAPEntry 43 }
+
+        wlanAPIpv6Address OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..45))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            IPv6 Address of the Access Point
+            "
+        ::= { wlsxWlanAPEntry 44 }
+
+        wlanAPFlexRadioMode OBJECT-TYPE
+        SYNTAX       ArubaFlexRadioMode
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Flex Radio Operating Mode
+            "
+        ::= { wlsxWlanAPEntry 45 }
+    wlanAPdot11aAntennaGain10x  OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Configured antenna  gain for 'A' Radio (antennaGain*10)
+            "
+        ::= { wlsxWlanAPEntry 46 }
+
+    wlanAPdot11gAntennaGain10x  OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Configured antenna  gain for 'G' Radio (antennaGain*10)
+            "
+        ::= { wlsxWlanAPEntry 47 }
+ 
+    wlanAPDual5GMode OBJECT-TYPE
+        SYNTAX       ArubaDual5GMode
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Dual5GHz Operating Mode 
+            "
+        ::= { wlsxWlanAPEntry 48 }
+
+        wlanAPActiveIpAddress  OBJECT-TYPE
+        SYNTAX       DisplayString(SIZE(0..45))
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+            IPv4 or IPv6 Address of the Access Point
+            "
+        ::= { wlsxWlanAPEntry 49 }
+
+    wlanAPSplit5GMode OBJECT-TYPE
+        SYNTAX       ArubaSplit5GMode
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+            "
+                        Split 5GHz Operating Mode 
+            "
+        ::= { wlsxWlanAPEntry 50 }
+
+
+-- Radio table is indexed by the Mac Address of the AP and the type of the
+-- radio.
+
+   wlsxWlanRadioTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanRadioEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table lists all the radios known to the 
+			controller. 
+		"
+      ::= { wlsxWlanAccessPointInfoGroup 5 } 
+
+   wlsxWlanRadioEntry OBJECT-TYPE 
+	  SYNTAX       WlanRadioEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "AP Radio Entry"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber}
+      ::= { wlsxWlanRadioTable 1 } 
+
+   WlanRadioEntry ::=
+     SEQUENCE {
+		 wlanAPRadioNumber					Integer32,
+		 wlanAPRadioType					ArubaPhyType,
+		 wlanAPRadioChannel					Integer32,
+		 wlanAPRadioTransmitPower			Integer32,
+		 wlanAPRadioMode					ArubaAccessPointMode,
+		 wlanAPRadioUtilization				Integer32,
+		 wlanAPRadioNumAssociatedClients	Integer32,
+		 wlanAPRadioNumMonitoredClients		Integer32,
+		 wlanAPRadioNumActiveBSSIDs			Integer32,
+		 wlanAPRadioNumMonitoredBSSIDs		Integer32,
+		 wlanAPRadioBearing     			DisplayString,
+		 wlanAPRadioTiltAngle   			DisplayString,
+		 wlanAPRadioHTMode					ArubaHTMode,
+		 wlanAPRadioHTExtChannel			ArubaHTExtChannel,
+		 wlanAPRadioHTChannel				DisplayString,
+		 wlanAPRadioAPName  				DisplayString,
+		 wlanAPRadioTransmitPower10x		Integer32
+	 }
+
+   	wlanAPRadioNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The radio number
+            "
+        ::= { wlsxWlanRadioEntry 1 }
+
+   	wlanAPRadioType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+			Type of the Radio
+            "
+        ::= { wlsxWlanRadioEntry 2 }
+
+	wlanAPRadioChannel OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The channel the radio is currently operating on.
+            "
+        ::= { wlsxWlanRadioEntry 3 }
+
+	wlanAPRadioTransmitPower OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The current power level of the radio. (Transmitted as txpwr*2)
+            "
+        ::= { wlsxWlanRadioEntry 4 }
+
+	wlanAPRadioMode OBJECT-TYPE
+         SYNTAX       ArubaAccessPointMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Mode in which the radio is operating.
+            "
+        ::= { wlsxWlanRadioEntry 5 }
+
+	wlanAPRadioUtilization OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Utilization of the radio as a percentage of the total capacity.
+			"
+        ::= { wlsxWlanRadioEntry 6 }
+
+
+	wlanAPRadioNumAssociatedClients OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of Clients associated to this radio.
+            "
+        ::= { wlsxWlanRadioEntry 7 }
+
+
+	wlanAPRadioNumMonitoredClients OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of Clients this Radio is monitoring.
+            "
+        ::= { wlsxWlanRadioEntry 8 }
+
+
+	wlanAPRadioNumActiveBSSIDs OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of active BSSIDs on this Radio.
+            "
+        ::= { wlsxWlanRadioEntry 9 }
+
+
+	wlanAPRadioNumMonitoredBSSIDs OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of AP BSSIDs this radio is monitoring.
+            "
+        ::= { wlsxWlanRadioEntry 10 }
+
+	wlanAPRadioBearing OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+            Antenna Bearing in degrees from True North.
+            Unsigned floating-point value. Range: 0-360.
+            "
+        ::= { wlsxWlanRadioEntry 11 }
+
+	wlanAPRadioTiltAngle OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+            Tilt angle of antenna in degrees. -ve for downtilt,
+            +ve for uptilt. Signed floating-point value. Range: -90 to +90.
+            "
+        ::= { wlsxWlanRadioEntry 12 }
+
+	wlanAPRadioHTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The HT mode of the radio, if any.
+            "
+        ::= { wlsxWlanRadioEntry 13 }
+
+	wlanAPRadioHTExtChannel OBJECT-TYPE
+         SYNTAX       ArubaHTExtChannel
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Indicates the offset of the extension channel, if any. Will return secondary channel
+            number in 80+80 MHz mode.
+            "
+        ::= { wlsxWlanRadioEntry 14 }
+
+	wlanAPRadioHTChannel OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "
+            A display string indicating the current channel.  If wlanAPRadioHTExtChannel
+            is set to 'above' or 'below', then the channel number will be appended
+			with '+' or '-' respectively.
+            "
+        ::= { wlsxWlanRadioEntry 15 }
+
+	wlanAPRadioAPName OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-write
+         STATUS       current
+         DESCRIPTION
+            "Name of the AP the radio belongs to"
+        ::= { wlsxWlanRadioEntry 16 }
+
+	wlanAPRadioTransmitPower10x OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The current power level of the radio. (Transmitted as txpwr*10)
+            "
+        ::= { wlsxWlanRadioEntry 17 }
+
+-- Local Access Point Table.
+
+   wlsxWlanAPBssidTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanAPBssidEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This table lists all the BSSIDs active on this controller. 
+		"
+      ::= { wlsxWlanAccessPointInfoGroup 7 } 
+
+   wlsxWlanAPBssidEntry OBJECT-TYPE 
+	  SYNTAX       WlanAPBssidEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "BSSID Entry"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
+      ::= { wlsxWlanAPBssidTable 1 } 
+
+   WlanAPBssidEntry ::=
+     SEQUENCE {
+         wlanAPBSSID						MacAddress,
+		 wlanAPESSID						DisplayString,
+		 wlanAPBssidSlot					Unsigned32,
+		 wlanAPBssidPort					Unsigned32,
+		 wlanAPBssidPhyType					ArubaPhyType,
+		 wlanAPBssidRogueType				ArubaRogueApType,
+		 wlanAPBssidMode					INTEGER,
+		 wlanAPBssidChannel					INTEGER,
+		 wlanAPBssidUpTime					TimeTicks,
+		 wlanAPBssidInactiveTime			TimeTicks,
+		 wlanAPBssidLoadBalancing			TruthValue,
+		 wlanAPBssidNumAssociatedStations	Unsigned32,
+		 wlanAPBssidAPMacAddress			MacAddress,
+		 wlanAPBssidPhyNumber				Integer32,
+		 wlanAPBssidHTMode					ArubaHTMode,
+		 wlanAPBssidHTExtChannel			ArubaHTExtChannel,
+         wlanAPBssidHTChannel               DisplayString,
+         wlanAPBssidSnr                     Integer32
+   }
+
+   	wlanAPBSSID OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The MAC address of the Access Point.
+            "
+        ::= { wlsxWlanAPBssidEntry 1 }
+
+   	wlanAPESSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID this BSSID is advertising.
+            "
+        ::= { wlsxWlanAPBssidEntry 2 }
+
+   	wlanAPBssidSlot OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Slot to which the Access Point is connected.
+            "
+        ::= { wlsxWlanAPBssidEntry 3 }
+
+   	wlanAPBssidPort OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Port to which the Access Point is connected.
+            "
+        ::= { wlsxWlanAPBssidEntry 4 }
+
+   	wlanAPBssidPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Physical Layer Protocol support of the AP.
+            "
+        ::= { wlsxWlanAPBssidEntry 5 }
+
+   	wlanAPBssidRogueType OBJECT-TYPE
+         SYNTAX       ArubaRogueApType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The type of the Rogue.
+			"
+        ::= { wlsxWlanAPBssidEntry 6 }
+
+   	wlanAPBssidMode OBJECT-TYPE
+         SYNTAX       INTEGER{
+						ap(1),
+						am(2),
+						mpp(3),
+						mp(4)
+					  }
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether the Access point is an Air Monitor or regular AP
+			or Mesh Portal or Mesh Point.
+            "
+        ::= { wlsxWlanAPBssidEntry 7 }
+
+   	wlanAPBssidChannel OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The current operating channel.
+            "
+        ::= { wlsxWlanAPBssidEntry 8 }
+
+   	wlanAPBssidUpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time (in hundredths of seconds) since the tunnel was created 
+			 between the access point and controller 
+            "
+        ::= { wlsxWlanAPBssidEntry 9 }
+
+   	wlanAPBssidInactiveTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time (in hundredths of seconds) since any activity took place on
+			 the BSSID.
+            "
+        ::= { wlsxWlanAPBssidEntry 10 }
+
+   	wlanAPBssidLoadBalancing OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates whether load balancing is enabled or not.
+            "
+        ::= { wlsxWlanAPBssidEntry 11 }
+
+   	wlanAPBssidNumAssociatedStations OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the number of stations associated to this BSSID.
+            "
+        ::= { wlsxWlanAPBssidEntry 12 }
+
+	
+   	wlanAPBssidAPMacAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the Access Point to which this BSSID belongs.
+            "
+        ::= { wlsxWlanAPBssidEntry 13 }
+
+   	wlanAPBssidPhyNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the radio number to which this BSSID belongs.
+            "
+        ::= { wlsxWlanAPBssidEntry 14 }
+
+   	wlanAPBssidHTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Indicates the HT mode of this BSSID, if any.
+            "
+        ::= { wlsxWlanAPBssidEntry 15 }
+
+   	wlanAPBssidHTExtChannel OBJECT-TYPE
+         SYNTAX       ArubaHTExtChannel
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Indicates the offset of the 40MHz extension channel, if any.
+            "
+        ::= { wlsxWlanAPBssidEntry 16 }
+
+   	wlanAPBssidHTChannel OBJECT-TYPE
+         SYNTAX       DisplayString
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            A display string indicating the current channel.  If wlanAPBssidHTExtChannel
+            is set to 'above' or 'below', then the channel number will be appended
+			with '+' or '-' respectively.
+            "
+        ::= { wlsxWlanAPBssidEntry 17 }
+
+        wlanAPBssidSnr OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        Indicates the Signal Noise Ratio of this BSSID.
+            "
+        ::= { wlsxWlanAPBssidEntry 18 }
+
+-- ESSID Table
+
+   wlsxWlanESSIDTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanESSIDEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the ESSIDs advertised by this controller. 
+		"
+      ::= { wlsxWlanAccessPointInfoGroup 8 } 
+
+   wlsxWlanESSIDEntry OBJECT-TYPE 
+	  SYNTAX       WlanESSIDEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "ESSID Entry"
+	  INDEX {wlanESSID}
+      ::= { wlsxWlanESSIDTable 1 } 
+
+   WlanESSIDEntry ::=
+     SEQUENCE {
+		 wlanESSID						DisplayString,
+		 wlanESSIDNumStations			Unsigned32,
+		 wlanESSIDNumAccessPointsUp		Unsigned32,
+		 wlanESSIDNumAccessPointsDown	Unsigned32,
+		 wlanESSIDEncryptionType		ArubaEncryptionMethods
+   }
+
+   	wlanESSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The ESSID being advertised.
+            "
+        ::= { wlsxWlanESSIDEntry 1 }
+
+   	wlanESSIDNumStations OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of stations connected to this ESSID.
+            "
+        ::= { wlsxWlanESSIDEntry 2 }
+
+   	wlanESSIDNumAccessPointsUp OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of APs currently advertising this ESSID.
+            "
+        ::= { wlsxWlanESSIDEntry 3 }
+
+   	wlanESSIDNumAccessPointsDown OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of APs configured to advertise this ESSID that
+			 are not currently operational.
+            "
+        ::= { wlsxWlanESSIDEntry 4 }
+
+   	wlanESSIDEncryptionType OBJECT-TYPE
+        SYNTAX      ArubaEncryptionMethods
+
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The encryption methods supported on this ESSID.
+            "
+        ::= { wlsxWlanESSIDEntry 5 }
+
+-- ESSID Vlan Pool Table
+
+   wlsxWlanESSIDVlanPoolTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanESSIDVlanPoolEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the VLANs associated with this ESSID. 
+		"
+      ::= { wlsxWlanAccessPointInfoGroup 9 } 
+
+   wlsxWlanESSIDVlanPoolEntry OBJECT-TYPE 
+	  SYNTAX       WlanESSIDVlanPoolEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "ESSID Vlan Pool Entry"
+	  INDEX {wlanESSID, wlanESSIDVlanId}
+      ::= { wlsxWlanESSIDVlanPoolTable 1 } 
+
+   WlanESSIDVlanPoolEntry ::=
+     SEQUENCE {
+		 wlanESSIDVlanId				Unsigned32,
+		 wlanESSIDVlanPoolStatus			RowStatus
+     }
+
+   	wlanESSIDVlanId OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			VLAN which is part of the VLAN pool for this ESSID.
+            "
+        ::= { wlsxWlanESSIDVlanPoolEntry 1 }
+
+   	wlanESSIDVlanPoolStatus OBJECT-TYPE
+         SYNTAX       RowStatus
+         MAX-ACCESS   read-create
+         STATUS       current
+         DESCRIPTION
+            "
+				Row status object used to indicate the status of the row.
+            "
+        ::= { wlsxWlanESSIDVlanPoolEntry 2 }
+
+--Station Info Group contains the State information for the stations.
+
+--Station Table contains all the station associated with an AP.
+
+   wlsxWlanStationTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanStationEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the wireless stations associated with the 
+			Access points connected to this controller. 
+		"
+	
+      ::= { wlsxWlanStationInfoGroup 1} 
+
+   wlsxWlanStationEntry OBJECT-TYPE 
+	  SYNTAX       WlanStationEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Entry"
+	  INDEX {wlanStaPhyAddress}
+      ::= { wlsxWlanStationTable 1 } 
+
+   WlanStationEntry ::=
+     SEQUENCE {
+         wlanStaPhyAddress				MacAddress,
+         wlanStaApBssid					MacAddress,
+		 wlanStaPhyType					ArubaPhyType,
+		 wlanStaIsAuthenticated			TruthValue,
+		 wlanStaIsAssociated			TruthValue,
+		 wlanStaChannel					INTEGER,
+		 wlanStaVlanId					ArubaVlanValidRange,
+		 wlanStaVOIPState				TruthValue,
+		 wlanStaVOIPProtocol			ArubaVoipProtocolType,
+		 wlanStaTransmitRate			Unsigned32,
+		 wlanStaAssociationID			Unsigned32,
+		 wlanStaAccessPointESSID		DisplayString,
+		 wlanStaPhyNumber				Integer32,
+		 wlanStaRSSI					Integer32,
+		 wlanStaUpTime					TimeTicks,
+		 wlanStaHTMode					ArubaHTMode,
+		 wlanStaTransmitRateCode		Unsigned32
+   }
+
+   	wlanStaPhyAddress OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			The Physical Address of the Station.
+            "
+        ::= { wlsxWlanStationEntry 1 }
+
+   	wlanStaApBssid OBJECT-TYPE
+         SYNTAX       MacAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The Access point to which this station last associated to.
+            "
+        ::= { wlsxWlanStationEntry 2 }
+
+	wlanStaPhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Type of the Station.
+            "
+        ::= { wlsxWlanStationEntry 3 }
+
+	wlanStaIsAuthenticated OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Indicates whether the station is authenticated.
+            "
+        ::= { wlsxWlanStationEntry 4 }
+
+	wlanStaIsAssociated OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Indicates whether the station is associated.
+            "
+        ::= { wlsxWlanStationEntry 5 }
+
+	wlanStaChannel OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Channel on which the station is associated.
+            "
+        ::= { wlsxWlanStationEntry 6 }
+
+	wlanStaVlanId OBJECT-TYPE
+         SYNTAX       ArubaVlanValidRange
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			VLAN in which the station is present.
+            "
+        ::= { wlsxWlanStationEntry 7 }
+
+	wlanStaVOIPState OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The State of VoIP for this station.
+            "
+        ::= { wlsxWlanStationEntry 8 }
+
+	wlanStaVOIPProtocol OBJECT-TYPE
+         SYNTAX       ArubaVoipProtocolType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			If VoIP is enabled, the type of the protocol supported.
+            "
+        ::= { wlsxWlanStationEntry 9 }
+
+	wlanStaTransmitRate OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Transmit rate with which the Station is associated with this system.
+            "
+        ::= { wlsxWlanStationEntry 10 }
+
+	wlanStaAssociationID OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AID with which the Station is associated with this system.
+            "
+        ::= { wlsxWlanStationEntry 11 }
+
+	wlanStaAccessPointESSID OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID of the Access point
+            "
+        ::= { wlsxWlanStationEntry 12 }
+
+	wlanStaPhyNumber OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Radio PHY number to which the station is associated
+            "
+        ::= { wlsxWlanStationEntry 13 }
+
+	wlanStaRSSI OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Signal to Noise ratio for the station.
+            "
+        ::= { wlsxWlanStationEntry 14 }
+
+
+	wlanStaUpTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Time since the station associated to the current BSSID. 
+            "
+        ::= { wlsxWlanStationEntry 15 }
+
+	wlanStaHTMode OBJECT-TYPE
+         SYNTAX       ArubaHTMode
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The HT status of the station.
+            "
+        ::= { wlsxWlanStationEntry 16 }
+
+    wlanStaTransmitRateCode OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            Transmit rate code with which the Station is associated with this system, unit is mbps.
+            "
+        ::= { wlsxWlanStationEntry 17 }
+
+--Station Association Failure Table contains all the Stations that failed to 
+--associate an ap.
+
+   wlsxWlanStaAssociationFailureTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanStaAssociationFailureEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists all the stations and the BSSID's to which they 
+			failed to associate. Once a station successfully associates, 
+			association failure entries are not reported for that station.
+		"
+	
+      ::= { wlsxWlanStationInfoGroup 2} 
+
+   wlsxWlanStaAssociationFailureEntry OBJECT-TYPE 
+	  SYNTAX       WlanStaAssociationFailureEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Association Failure Entry"
+	  INDEX {wlanStaPhyAddress, wlanAPBSSID}
+      ::= { wlsxWlanStaAssociationFailureTable 1 } 
+
+   WlanStaAssociationFailureEntry ::=
+     SEQUENCE {
+		 wlanStaAssocFailureApName			DisplayString,
+		 wlanStaAssocFailureApEssid		DisplayString,
+		 wlanStaAssocFailurePhyNum			Integer32,
+		 wlanStaAssocFailurePhyType		ArubaPhyType,
+		 wlanStaAssocFailureElapsedTime	TimeTicks,
+		 wlanStaAssocFailureReason			DisplayString
+   }
+
+   	wlanStaAssocFailureApName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Name of the Access Point to which this station tried to associate.
+            "
+        ::= { wlsxWlanStaAssociationFailureEntry 1 }
+
+   	wlanStaAssocFailureApEssid OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..64))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			ESSID to which the station association failed.
+            "
+        ::= { wlsxWlanStaAssociationFailureEntry 2 }
+
+   	wlanStaAssocFailurePhyNum OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Radio PHY number to which the station tried to associate.
+            "
+        ::= { wlsxWlanStaAssociationFailureEntry 3 }
+
+   	wlanStaAssocFailurePhyType OBJECT-TYPE
+         SYNTAX       ArubaPhyType
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Radio PHY Type of the Station.
+            "
+        ::= { wlsxWlanStaAssociationFailureEntry 4 }
+
+   	wlanStaAssocFailureElapsedTime OBJECT-TYPE
+         SYNTAX       TimeTicks
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Elapsed time in timeticks after the station's failure to associate.
+            "
+        ::= { wlsxWlanStaAssociationFailureEntry 5 }
+
+   	wlanStaAssocFailureReason OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..80))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			Reason for the Station association failure
+            "
+        ::= { wlsxWlanStaAssociationFailureEntry 6 }
+
+-- Stats group contains tables for station statistics, BSSID statistics and
+-- AP statistics.
+
+   wlsxWlanAPStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanAPStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists the statistics of all the Access Points connected 
+			to the controller. 
+		"
+      ::= { wlsxWlanAccessPointStatsGroup 1 } 
+
+   wlsxWlanAPStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlanAPStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Access Point Stats entry"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
+      ::= { wlsxWlanAPStatsTable 1 } 
+
+   WlanAPStatsEntry ::=
+     SEQUENCE {
+		 wlanAPCurrentChannel		    Unsigned32,
+		 wlanAPNumClients		    	Integer32,
+		 wlanAPTxPkts					Counter32,
+		 wlanAPTxBytes					Counter32,
+		 wlanAPRxPkts					Counter32,
+		 wlanAPRxBytes					Counter32,
+		 wlanAPTxDeauthentications		Counter32,
+		 wlanAPRxDeauthentications		Counter32,
+		 wlanAPChannelThroughput		Integer32,
+		 wlanAPFrameRetryRate			Integer32,
+		 wlanAPFrameLowSpeedRate		Integer32,
+		 wlanAPFrameNonUnicastRate		Integer32,
+		 wlanAPFrameFragmentationRate	Integer32,
+		 wlanAPFrameBandwidthRate		Integer32,
+		 wlanAPFrameRetryErrorRate		Integer32,
+		 wlanAPChannelErrorRate			Integer32,
+		 wlanAPFrameReceiveErrorRate	Integer32,
+		 wlanAPRxDataPkts				Counter32,
+		 wlanAPRxDataBytes				Counter32,
+		 wlanAPTxDataPkts				Counter32,
+		 wlanAPTxDataBytes				Counter32,
+		 wlanAPRxDataPkts64				Counter64,
+		 wlanAPRxDataBytes64			Counter64,
+		 wlanAPTxDataPkts64				Counter64,
+         wlanAPTxDataBytes64            Counter64,
+         wlanAPWiredRxErrorPkts         Counter32,
+         wlanAPRxErrorPkts              Counter32
+   }
+
+	wlanAPCurrentChannel OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The channel the AP is currently using.
+            "
+        ::= { wlsxWlanAPStatsEntry 1 }
+
+	wlanAPNumClients OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of clients associated to this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 2 }
+
+	wlanAPTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 3 }
+
+	wlanAPTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 4 }
+
+	wlanAPRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 5 }
+
+	wlanAPRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 6 }
+
+	wlanAPTxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of deauthentications transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 7 }
+
+	wlanAPRxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of deauthentications received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 8 }
+
+	wlanAPChannelThroughput OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The throughput achieved on this channel.
+            "
+        ::= { wlsxWlanAPStatsEntry 9 }
+
+	wlanAPFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of retry 
+			 packets as a percentage of the total packets
+			 transmitted and received by this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 10 }
+
+	wlanAPFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
+			 for B band) packets as a percentage of the total packets
+			 transmitted and received by this BSSID
+            "
+        ::= { wlsxWlanAPStatsEntry 11 }
+
+	wlanAPFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of broadcast and multicast
+			 packets as a percentage of the total packets
+			 transmitted on this BSSIDchannel.
+            "
+        ::= { wlsxWlanAPStatsEntry 12 }
+
+	wlanAPFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of fragments
+			 as a percentage of the total packets
+			 transmitted by this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 13 }
+
+	wlanAPFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The bandwidth of this BSSID in Kbps.
+            "
+        ::= { wlsxWlanAPStatsEntry 14 }
+
+	wlanAPFrameRetryErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 15 }
+	
+	wlanAPChannelErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of error packets 
+			 as a percentage of the total packets received
+			on the current channel.
+            "
+        ::= { wlsxWlanAPStatsEntry 16 }
+
+	wlanAPFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 17 }
+
+	wlanAPRxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			The number of packets received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 18 }
+
+	wlanAPRxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			The number of bytes received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 19 }
+	
+	wlanAPTxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			The number of packets transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 20 }
+
+	wlanAPTxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+			The number of bytes transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 21 }
+
+	wlanAPRxDataPkts64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 22 }
+
+	wlanAPRxDataBytes64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes received on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 23 }
+	
+	wlanAPTxDataPkts64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 24 }
+
+	wlanAPTxDataBytes64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes transmitted on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 25 }
+
+    wlanAPWiredRxErrorPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The number of error packets received from the controller on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 26 }
+
+    wlanAPRxErrorPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The number of error packets received from stations on this BSSID.
+            "
+        ::= { wlsxWlanAPStatsEntry 27 }
+
+-- This table breaks down the AP statistics observed into different
+-- rate categories.
+
+   wlsxWlanAPRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanAPRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the AP Packet and Byte Counts
+		 but represented in terms of rate categories.
+		"
+	
+      ::= { wlsxWlanAccessPointStatsGroup 2 } 
+
+     wlsxWlanAPRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanAPRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Data rate based packet and byte count entry for an AP"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
+      ::= { wlsxWlanAPRateStatsTable 1 } 
+	
+     WlsxWlanAPRateStatsEntry ::=
+     SEQUENCE {
+		 wlanAPStatsTotPktsAt1Mbps			Counter32,
+		 wlanAPStatsTotBytesAt1Mbps			Counter32,
+		 wlanAPStatsTotPktsAt2Mbps			Counter32,
+		 wlanAPStatsTotBytesAt2Mbps			Counter32,
+		 wlanAPStatsTotPktsAt5Mbps			Counter32,
+		 wlanAPStatsTotBytesAt5Mbps			Counter32,
+		 wlanAPStatsTotPktsAt11Mbps			Counter32,
+		 wlanAPStatsTotBytesAt11Mbps		Counter32,
+		 wlanAPStatsTotPktsAt6Mbps			Counter32,
+		 wlanAPStatsTotBytesAt6Mbps			Counter32,
+		 wlanAPStatsTotPktsAt12Mbps			Counter32,
+		 wlanAPStatsTotBytesAt12Mbps		Counter32,
+		 wlanAPStatsTotPktsAt18Mbps			Counter32,
+		 wlanAPStatsTotBytesAt18Mbps		Counter32,
+		 wlanAPStatsTotPktsAt24Mbps			Counter32,
+		 wlanAPStatsTotBytesAt24Mbps		Counter32,
+		 wlanAPStatsTotPktsAt36Mbps			Counter32,
+		 wlanAPStatsTotBytesAt36Mbps		Counter32,
+		 wlanAPStatsTotPktsAt48Mbps			Counter32,
+		 wlanAPStatsTotBytesAt48Mbps		Counter32,
+		 wlanAPStatsTotPktsAt54Mbps			Counter32,
+		 wlanAPStatsTotBytesAt54Mbps		Counter32,
+		 wlanAPStatsTotPktsAt9Mbps			Counter32,
+		 wlanAPStatsTotBytesAt9Mbps		    Counter32
+--		 wlanAPStatsTotPktsAtHT6dot5Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT6dot5Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT13Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT13Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT13dot5Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT13dot5Mbps	Counter32,
+--		 wlanAPStatsTotPktsAtHT15Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT15Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT19dot5Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT19dot5Mbps	Counter32,
+--		 wlanAPStatsTotPktsAtHT26Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT26Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT27Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT27Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT30Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT30Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT39Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT39Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT40dot5Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT40dot5Mbps	Counter32,
+--		 wlanAPStatsTotPktsAtHT45Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT45Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT52Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT52Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT54Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT54Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT58dot5Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT58dot5Mbps	Counter32,
+--		 wlanAPStatsTotPktsAtHT60Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT60Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT65Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT65Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT78Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT78Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT81Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT81Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT90Mbps			Counter32,
+--		 wlanAPStatsTotBytesAtHT90Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT104Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT104Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT108Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT108Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT117Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT117Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT120Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT120Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT121dot5Mbps	Counter32,
+--		 wlanAPStatsTotBytesAtHT121dot5Mbps	Counter32,
+--		 wlanAPStatsTotPktsAtHT130Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT130Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT135Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT135Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT150Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT150Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT162Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT162Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT180Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT180Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT216Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT216Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT240Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT240Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT243Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT243Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT270Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT270Mbps		Counter32,
+--		 wlanAPStatsTotPktsAtHT300Mbps		Counter32,
+--		 wlanAPStatsTotBytesAtHT300Mbps		Counter32
+     }
+
+     wlanAPStatsTotPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 1Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 1 }
+
+     wlanAPStatsTotBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 1Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 2 }
+
+     wlanAPStatsTotPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 2Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 3 }
+
+     wlanAPStatsTotBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 2Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 4 }
+
+     wlanAPStatsTotPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 5Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 5 }
+
+     wlanAPStatsTotBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 5Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 6 }
+
+     wlanAPStatsTotPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 11Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 7 }
+
+     wlanAPStatsTotBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			 on this BSSID at 11Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 8 }
+
+     wlanAPStatsTotPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 6Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 9 }
+
+     wlanAPStatsTotBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 6Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 10 }
+
+     wlanAPStatsTotPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 12Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 11 }
+
+     wlanAPStatsTotBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 12Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 12 }
+
+     wlanAPStatsTotPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 18Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 13 }
+
+     wlanAPStatsTotBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 18Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 14 }
+
+     wlanAPStatsTotPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 24Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 15 }
+
+     wlanAPStatsTotBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 24Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 16 }
+
+     wlanAPStatsTotPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 36Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 17 }
+
+     wlanAPStatsTotBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 36Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 18 }
+
+     wlanAPStatsTotPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 48Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 19 }
+
+     wlanAPStatsTotBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 48Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 20 }
+
+     wlanAPStatsTotPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 54Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 21 }
+
+     wlanAPStatsTotBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+		 	  on this BSSID at 54Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 22 }
+
+     wlanAPStatsTotPktsAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets observed
+			  on this BSSID at 9Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 23 }
+
+     wlanAPStatsTotBytesAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Bytes observed
+			  on this BSSID at 9Mbps rate.
+            "
+        ::= { wlsxWlanAPRateStatsEntry 24 }
+
+--	 wlanAPStatsTotPktsAtHT6dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 6.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 25 }
+--
+--	 wlanAPStatsTotBytesAtHT6dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 6.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 26 }
+--
+--	 wlanAPStatsTotPktsAtHT13Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 13.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 27 }
+--
+--	 wlanAPStatsTotBytesAtHT13Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 13.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 28 }
+--
+--	 wlanAPStatsTotPktsAtHT13dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 13.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 29 }
+--
+--	 wlanAPStatsTotBytesAtHT13dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 13.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 30 }
+--
+--	 wlanAPStatsTotPktsAtHT15Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 15.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 31 }
+--
+--	 wlanAPStatsTotBytesAtHT15Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 15.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 32 }
+--
+--	 wlanAPStatsTotPktsAtHT19dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 19.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 33 }
+--
+--	 wlanAPStatsTotBytesAtHT19dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 19.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 34 }
+--
+--	 wlanAPStatsTotPktsAtHT26Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 26.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 35 }
+--
+--	 wlanAPStatsTotBytesAtHT26Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 26.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 36 }
+--
+--	 wlanAPStatsTotPktsAtHT27Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 27.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 37 }
+--
+--	 wlanAPStatsTotBytesAtHT27Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 27.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 38 }
+--
+--	 wlanAPStatsTotPktsAtHT30Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 30.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 39 }
+--
+--	 wlanAPStatsTotBytesAtHT30Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 30.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 40 }
+--
+--	 wlanAPStatsTotPktsAtHT39Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 39.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 41 }
+--
+--	 wlanAPStatsTotBytesAtHT39Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 39.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 42 }
+--
+--	 wlanAPStatsTotPktsAtHT40dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 40.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 43 }
+--
+--	 wlanAPStatsTotBytesAtHT40dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 40.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 44 }
+--
+--	 wlanAPStatsTotPktsAtHT45Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 45.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 45 }
+--
+--	 wlanAPStatsTotBytesAtHT45Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 45.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 46 }
+--
+--	 wlanAPStatsTotPktsAtHT52Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 52.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 47 }
+--
+--	 wlanAPStatsTotBytesAtHT52Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 52.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 48 }
+--
+--	 wlanAPStatsTotPktsAtHT54Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 54.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 49 }
+--
+--	 wlanAPStatsTotBytesAtHT54Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 54.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 50 }
+--
+--	 wlanAPStatsTotPktsAtHT58dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 58.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 51 }
+--
+--	 wlanAPStatsTotBytesAtHT58dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 58.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 52 }
+--
+--	 wlanAPStatsTotPktsAtHT60Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 60.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 53 }
+--
+--	 wlanAPStatsTotBytesAtHT60Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 60.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 54 }
+--
+--	 wlanAPStatsTotPktsAtHT65Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 65.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 55 }
+--
+--	 wlanAPStatsTotBytesAtHT65Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 65.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 56 }
+--
+--	 wlanAPStatsTotPktsAtHT78Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 78.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 57 }
+--
+--	 wlanAPStatsTotBytesAtHT78Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 78.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 58 }
+--
+--	 wlanAPStatsTotPktsAtHT81Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 81.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 59 }
+--
+--	 wlanAPStatsTotBytesAtHT81Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 81.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 60 }
+--
+--	 wlanAPStatsTotPktsAtHT90Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 90.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 61 }
+--
+--	 wlanAPStatsTotBytesAtHT90Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 90.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 62 }
+--
+--	 wlanAPStatsTotPktsAtHT104Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 104.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 63 }
+--
+--	 wlanAPStatsTotBytesAtHT104Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 104.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 64 }
+--
+--	 wlanAPStatsTotPktsAtHT108Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 108.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 65 }
+--
+--	 wlanAPStatsTotBytesAtHT108Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 108.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 66 }
+--
+--	 wlanAPStatsTotPktsAtHT117Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 117.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 67 }
+--
+--	 wlanAPStatsTotBytesAtHT117Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 117.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 68 }
+--
+--	 wlanAPStatsTotPktsAtHT120Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 120.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 69 }
+--
+--	 wlanAPStatsTotBytesAtHT120Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 120.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 70 }
+--
+--	 wlanAPStatsTotPktsAtHT121dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 121.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 71 }
+--
+--	 wlanAPStatsTotBytesAtHT121dot5Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 121.5 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 72 }
+--
+--	 wlanAPStatsTotPktsAtHT130Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 130.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 73 }
+--
+--	 wlanAPStatsTotBytesAtHT130Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 130.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 74 }
+--
+--	 wlanAPStatsTotPktsAtHT135Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 135.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 75 }
+--
+--	 wlanAPStatsTotBytesAtHT135Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 135.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 76 }
+--
+--	 wlanAPStatsTotPktsAtHT150Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 150.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 77 }
+--
+--	 wlanAPStatsTotBytesAtHT150Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 150.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 78 }
+--
+--	 wlanAPStatsTotPktsAtHT162Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 162.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 79 }
+--
+--	 wlanAPStatsTotBytesAtHT162Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 162.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 80 }
+--
+--	 wlanAPStatsTotPktsAtHT180Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 180.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 81 }
+--
+--	 wlanAPStatsTotBytesAtHT180Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 180.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 82 }
+--
+--	 wlanAPStatsTotPktsAtHT216Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 216.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 83 }
+--
+--	 wlanAPStatsTotBytesAtHT216Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 216.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 84 }
+--
+--	 wlanAPStatsTotPktsAtHT240Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 240.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 85 }
+--
+--	 wlanAPStatsTotBytesAtHT240Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 240.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 86 }
+--
+--	 wlanAPStatsTotPktsAtHT243Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 243.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 87 }
+--
+--	 wlanAPStatsTotBytesAtHT243Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 243.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 88 }
+--
+--	 wlanAPStatsTotPktsAtHT270Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 270.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 89 }
+--
+--	 wlanAPStatsTotBytesAtHT270Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 270.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 90 }
+--
+--	 wlanAPStatsTotPktsAtHT300Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of packets observed
+--			  on this BSSID at the HT 300.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 91 }
+--
+--	 wlanAPStatsTotBytesAtHT300Mbps OBJECT-TYPE
+--		 SYNTAX       Counter32  
+--		 MAX-ACCESS   read-only
+--		 STATUS       current
+--		 DESCRIPTION
+--			"
+--			  This attribute indicates the total number of bytes observed
+--			  on this BSSID at the HT 300.0 rate.
+--			"
+--		::= { wlsxWlanAPRateStatsEntry 92 }
+
+-- This table breaks down the BSSID statistics observed based on the
+-- Destination Address Types. 
+
+   wlsxWlanAPDATypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanAPDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per BSSID Packet and Byte Counts
+		 but broken down in terms of Destination Address Type. 
+		"
+      ::= { wlsxWlanAccessPointStatsGroup 3 } 
+
+     wlsxWlanAPDATypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanAPDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Destination Address based packet and byte count entry for an AP"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
+      ::= { wlsxWlanAPDATypeStatsTable 1 } 
+	
+     WlsxWlanAPDATypeStatsEntry ::=
+     SEQUENCE {
+		 wlanAPStatsTotDABroadcastPkts		Counter32  ,
+		 wlanAPStatsTotDABroadcastBytes		Counter32  ,
+		 wlanAPStatsTotDAMulticastPkts		Counter32  ,
+		 wlanAPStatsTotDAMulticastBytes		Counter32  ,
+		 wlanAPStatsTotDAUnicastPkts			Counter32  ,
+		 wlanAPStatsTotDAUnicastBytes		Counter32  
+
+     }
+
+     wlanAPStatsTotDABroadcastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Broadcast packets 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPDATypeStatsEntry 1 }
+
+     wlanAPStatsTotDABroadcastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Broadcast Bytes 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPDATypeStatsEntry 2 }
+
+     wlanAPStatsTotDAMulticastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Multicast packets 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPDATypeStatsEntry 3 }
+
+     wlanAPStatsTotDAMulticastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Multicast Bytes 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPDATypeStatsEntry 4 }
+
+     wlanAPStatsTotDAUnicastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Unicast packets 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPDATypeStatsEntry 5 }
+
+     wlanAPStatsTotDAUnicastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Unicast Bytes 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPDATypeStatsEntry 6 }
+
+-- This table breaks down the BSSID statistics observed based on the
+-- the Type of the Packet. 
+
+   wlsxWlanAPFrameTypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanAPFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per BSSID Packet and Byte Counts
+		 but broken down into different Frame Types. 
+		"
+      ::= { wlsxWlanAccessPointStatsGroup 4 } 
+
+     wlsxWlanAPFrameTypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanAPFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Frame Type based packet and byte count entry for an AP"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
+      ::= { wlsxWlanAPFrameTypeStatsTable 1 } 
+	
+     WlsxWlanAPFrameTypeStatsEntry ::=
+     SEQUENCE {
+		 wlanAPStatsTotMgmtPkts		Counter32  ,
+		 wlanAPStatsTotMgmtBytes	Counter32  ,
+		 wlanAPStatsTotCtrlPkts		Counter32  ,
+		 wlanAPStatsTotCtrlBytes	Counter32  ,
+		 wlanAPStatsTotDataPkts		Counter32  ,
+		 wlanAPStatsTotDataBytes	Counter32  
+
+     }
+
+     wlanAPStatsTotMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Management packets 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPFrameTypeStatsEntry 1 }
+
+     wlanAPStatsTotMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Management Bytes 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPFrameTypeStatsEntry 2 }
+
+     wlanAPStatsTotCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Control packets 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPFrameTypeStatsEntry 3 }
+
+     wlanAPStatsTotCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Control Bytes 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPFrameTypeStatsEntry 4 }
+
+     wlanAPStatsTotDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Data packets 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPFrameTypeStatsEntry 5 }
+
+     wlanAPStatsTotDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of Data Bytes 
+			  observed on this BSSID.
+            "
+        ::= { wlsxWlanAPFrameTypeStatsEntry 6 }
+
+-- This table breaks down the BSSID statistics observed into packet size 
+-- buckets.
+
+   wlsxWlanAPPktSizeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanAPPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the per BSSID Packet Count
+		 but broken down into different Packet Sizes. 
+		"
+      ::= { wlsxWlanAccessPointStatsGroup 5 } 
+
+     wlsxWlanAPPktSizeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanAPPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Packet Size based packet count entry for a BSSID"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID}
+      ::= { wlsxWlanAPPktSizeStatsTable 1 } 
+	
+     WlsxWlanAPPktSizeStatsEntry ::=
+     SEQUENCE {
+		 wlanAPStatsPkts63Bytes		Counter32  ,
+		 wlanAPStatsPkts64To127		Counter32  ,
+		 wlanAPStatsPkts128To255		Counter32  ,
+		 wlanAPStatsPkts256To511		Counter32  ,
+		 wlanAPStatsPkts512To1023	Counter32  ,
+		 wlanAPStatsPkts1024To1518	Counter32  
+
+     }
+
+     wlanAPStatsPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			  less than 64 bytes long.
+            "
+        ::= { wlsxWlanAPPktSizeStatsEntry 1 }
+
+     wlanAPStatsPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			  between 64 and 127 bytes long.
+            "
+        ::= { wlsxWlanAPPktSizeStatsEntry 2 }
+
+     wlanAPStatsPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			  between 128 and 255 bytes long.
+            "
+        ::= { wlsxWlanAPPktSizeStatsEntry 3 }
+
+     wlanAPStatsPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			  between 256 and 511 bytes long.
+            "
+        ::= { wlsxWlanAPPktSizeStatsEntry 4 }
+
+     wlanAPStatsPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			  between 512 and 1023 bytes long.
+            "
+        ::= { wlsxWlanAPPktSizeStatsEntry 5 }
+
+     wlanAPStatsPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total number of packets that were
+			  between 1024 and 1518 bytes long.
+            "
+        ::= { wlsxWlanAPPktSizeStatsEntry 6 }
+
+
+-- AP Chan Stats table 
+
+   wlsxWlanAPChStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanAPChStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists the Channel statistics of all the Access Points 
+			 connected to the controller. 
+		"
+      ::= { wlsxWlanAccessPointStatsGroup 6 } 
+
+   wlsxWlanAPChStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlanAPChStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Access Point Channel Stats entry"
+	  INDEX {wlanAPMacAddress, wlanAPRadioNumber}
+      ::= { wlsxWlanAPChStatsTable 1 } 
+
+   WlanAPChStatsEntry ::=
+     SEQUENCE {
+		 wlanAPChannelNumber			INTEGER,
+		 wlanAPChNumStations			Integer32,
+		 wlanAPChTotPkts				Counter32,
+		 wlanAPChTotBytes				Counter32,
+		 wlanAPChTotRetryPkts			Counter32,
+		 wlanAPChTotFragmentedPkts		Counter32,
+		 wlanAPChTotPhyErrPkts			Counter32,
+		 wlanAPChTotMacErrPkts			Counter32,
+		 wlanAPChNoise					Integer32,
+		 wlanAPChCoverageIndex			Integer32,
+		 wlanAPChInterferenceIndex		Integer32,
+		 wlanAPChFrameRetryRate			Integer32,
+		 wlanAPChFrameLowSpeedRate		Integer32,
+		 wlanAPChFrameNonUnicastRate	Integer32,
+		 wlanAPChFrameFragmentationRate	Integer32,
+		 wlanAPChFrameBandwidthRate		Integer32,
+		 wlanAPChFrameRetryErrorRate	Integer32,
+		 wlanAPChBusyRate				Integer32,
+		 wlanAPChNumAPs					Integer32,
+		 wlanAPChFrameReceiveErrorRate	Integer32,
+		 wlanAPChTransmittedFragmentCount	    Counter32,
+		 wlanAPChMulticastTransmittedFrameCount Counter32,
+		 wlanAPChFailedCount            Counter32,
+		 wlanAPChRetryCount             Counter32,
+		 wlanAPChMultipleRetryCount     Counter32,
+		 wlanAPChFrameDuplicateCount    Counter32,
+		 wlanAPChRTSSuccessCount        Counter32,
+		 wlanAPChRTSFailureCount        Counter32,
+		 wlanAPChACKFailureCount        Counter32,
+		 wlanAPChReceivedFragmentCount  Counter32,
+		 wlanAPChMulticastReceivedFrameCount    Counter32,
+		 wlanAPChFCSErrorCount          Counter32,
+		 wlanAPChTransmittedFrameCount  Counter32,
+		 wlanAPChWEPUndecryptableCount  Counter32,
+         wlanAPChRxUtilization       INTEGER,
+         wlanAPChTxUtilization       INTEGER,
+         wlanAPChUtilization  INTEGER
+   }
+
+	wlanAPChannelNumber OBJECT-TYPE
+         SYNTAX       INTEGER(1..165)
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The channel the AP is currently using.
+            "
+        ::= { wlsxWlanAPChStatsEntry 1 }
+
+   wlanAPChNumStations OBJECT-TYPE
+         SYNTAX       Integer32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the number of stations using this 
+			channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 2 }
+
+   wlanAPChTotPkts OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total packets observed on this
+			 channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 3 }
+
+   wlanAPChTotBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Bytes observed on this
+			 channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 4 }
+
+   wlanAPChTotRetryPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Retry Packets observed on this
+			 channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 5 }
+
+   wlanAPChTotFragmentedPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Fragmented Packets observed on 
+			 this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 6 }
+
+   wlanAPChTotPhyErrPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Physical Error Packets observed 
+			 on this channel. 
+            "
+        ::= { wlsxWlanAPChStatsEntry 7 }
+
+   wlanAPChTotMacErrPkts OBJECT-TYPE
+         SYNTAX       Counter32 
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the total Mac errors packets observed on 
+			 this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 8 }
+
+	wlanAPChNoise OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the noise observed on 
+			 this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 9 }
+
+	wlanAPChCoverageIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the coverage provided by the AP on
+			 this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 10 }
+
+	wlanAPChInterferenceIndex OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the interference
+			 observed on this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 11 }
+
+	wlanAPChFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of retry 
+			 packets as a percentage of the total packets
+			 transmitted and received on this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 12 }
+
+	wlanAPChFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
+			 for B band) packets as a percentage of the total packets
+			 transmitted and received on this channel
+            "
+        ::= { wlsxWlanAPChStatsEntry 13 }
+
+	wlanAPChFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of broadcast and multicast
+			 packets as a percentage of the total packets
+			 transmitted on this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 14 }
+
+	wlanAPChFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of fragments
+			 as a percentage of the total packets
+			 transmitted on this channel
+            "
+        ::= { wlsxWlanAPChStatsEntry 15 }
+
+	wlanAPChFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The bandwidth of this channel in Kbps.
+            "
+        ::= { wlsxWlanAPChStatsEntry 16 }
+
+	wlanAPChFrameRetryErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS  	  deprecated
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received on this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 17 }
+
+	wlanAPChBusyRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the busy
+			 this channel is.
+            "
+        ::= { wlsxWlanAPChStatsEntry 18 }
+
+	wlanAPChNumAPs 	OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			This attribute indicates the number of Access Points
+			 observed on this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 19 }
+
+	wlanAPChFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received on this channel.
+            "
+        ::= { wlsxWlanAPChStatsEntry 20 }
+
+	wlanAPChTransmittedFragmentCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall be incremented for an acknowledged MPDU
+            with an individual address in the address 1 field or an MPDU
+            with a multicast address in the address 1 field of type Data
+            or Management.
+            "
+        ::= { wlsxWlanAPChStatsEntry 21 }
+
+	wlanAPChMulticastTransmittedFrameCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment only when the multicast bit
+            is set in the destination MAC address of a successfully
+            transmitted MSDU. When operating as a STA in an ESS, where
+            these frames are directed to the AP, this implies having
+            received an acknowledgment to all associated MPDUs.
+            "
+        ::= { wlsxWlanAPChStatsEntry 22 }
+
+	wlanAPChFailedCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when an MSDU is not transmitted
+            successfully due to the number of transmit attempts exceeding
+            either the dot11ShortRetryLimit or dot11LongRetryLimit.
+            "
+        ::= { wlsxWlanAPChStatsEntry 23 }
+
+	wlanAPChRetryCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when an MSDU is successfully
+            transmitted after one or more retransmissions.
+            "
+        ::= { wlsxWlanAPChStatsEntry 24 }
+
+	wlanAPChMultipleRetryCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when an MSDU is successfully
+            transmitted after more than one retransmission.
+            "
+        ::= { wlsxWlanAPChStatsEntry 25 }
+
+	wlanAPChFrameDuplicateCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when a frame is received
+            that the Sequence Control field indicates is a
+            duplicate.
+            "
+        ::= { wlsxWlanAPChStatsEntry 26 }
+
+	wlanAPChRTSSuccessCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when a CTS is received in
+            response to an RTS.
+            "
+        ::= { wlsxWlanAPChStatsEntry 27 }
+
+	wlanAPChRTSFailureCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when a CTS is not received in
+            response to an RTS.
+            "
+        ::= { wlsxWlanAPChStatsEntry 28 }
+
+	wlanAPChACKFailureCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when an ACK is not received
+            when expected.
+            "
+        ::= { wlsxWlanAPChStatsEntry 29 }
+
+	wlanAPChReceivedFragmentCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall be incremented for each successfully
+            received MPDU of type Data or Management.
+            "
+        ::= { wlsxWlanAPChStatsEntry 30 }
+
+	wlanAPChMulticastReceivedFrameCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when a MSDU is received
+            with the multicast bit set in the destination
+            MAC address.
+            "
+        ::= { wlsxWlanAPChStatsEntry 31 }
+
+	wlanAPChFCSErrorCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when an FCS error is
+            detected in a received MPDU.
+            "
+        ::= { wlsxWlanAPChStatsEntry 32 }
+
+	wlanAPChTransmittedFrameCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment for each successfully transmitted
+            MSDU.
+            "
+        ::= { wlsxWlanAPChStatsEntry 33 }
+        
+	wlanAPChWEPUndecryptableCount OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This counter shall increment when a frame is received with the
+            Protected Frame subfield of the Frame Control field set to one and
+            the WEPOn value for the key mapped to the transmitter's MAC address
+            indicates that the frame should not have been encrypted or that frame
+            is discarded due to the receiving STA not implementing the privacy
+            option.
+            "
+        ::= { wlsxWlanAPChStatsEntry 34 }
+        
+    wlanAPChRxUtilization OBJECT-TYPE
+        SYNTAX INTEGER(0..100)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "
+            This is the percentage of time spent by the radio 
+            in receiving packets.
+            "
+        ::= { wlsxWlanAPChStatsEntry 35 }
+
+    wlanAPChTxUtilization OBJECT-TYPE
+        SYNTAX INTEGER(0..100)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "
+            This is the percentage of time spent by the radio 
+            in transmitting packets.
+            "
+        ::= { wlsxWlanAPChStatsEntry 36 }
+
+    wlanAPChUtilization OBJECT-TYPE
+        SYNTAX INTEGER(0..100)
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+            "
+            This is the percentage of time the channel is busy.
+            "
+        ::= { wlsxWlanAPChStatsEntry 37 }
+
+-- AP Wired Stats table
+
+   wlsxWlanAPWiredStatsTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanAPWiredStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       deprecated
+      DESCRIPTION
+                "
+                        This Table lists the Wired statistics of all the Access Points
+                         connected to the controller.
+                "
+      ::= { wlsxWlanAccessPointStatsGroup 7 }
+
+   wlsxWlanAPWiredStatsEntry OBJECT-TYPE
+          SYNTAX       WlanAPWiredStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       deprecated
+      DESCRIPTION
+             "Access Point Wired Stats entry"
+          INDEX {wlanAPMacAddress}
+      ::= { wlsxWlanAPWiredStatsTable 1 }
+
+   WlanAPWiredStatsEntry ::=
+     SEQUENCE {
+                 wlanAPWiredRxPkts                      Counter32,
+                 wlanAPWiredRxDroppedPkts               Counter32,
+                 wlanAPWiredRxBytes                     Counter32,
+                 wlanAPWiredTxBytes                     Counter32,
+                 wlanAPWiredRxRate                      Gauge32,
+                 wlanAPWiredTxRate                      Gauge32
+   }
+
+   wlanAPWiredRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+                        This attribute indicates the total packets received from the
+                         AP wired side.
+            "
+        ::= { wlsxWlanAPWiredStatsEntry 1 }
+
+   wlanAPWiredRxDroppedPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+                        This attribute indicates the total dropped packets received
+                         from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredStatsEntry 2 }
+
+   wlanAPWiredRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes of correct packets
+                         received from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredStatsEntry 3 }
+
+   wlanAPWiredTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes transmitted from
+                         the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredStatsEntry 4 }
+
+   wlanAPWiredRxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+                        This attribute indicates the data rate (kbyte/s)
+                         received from AP wired side in sampling interval.
+            "
+        ::= { wlsxWlanAPWiredStatsEntry 5 }
+
+   wlanAPWiredTxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       deprecated
+         DESCRIPTION
+            "
+                        This attribute indicates the data rate (kbyte/s)
+                         transmitted from AP wired side in sampling interval.
+            "
+        ::= { wlsxWlanAPWiredStatsEntry 6 }
+
+-- AP ESSID Stats table
+
+   wlsxWlanAPESSIDStatsTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanAPESSIDStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists the ESSID statistics of all the Access Points
+                         connected to the controller.
+                "
+      ::= { wlsxWlanAccessPointStatsGroup 8 }
+
+   wlsxWlanAPESSIDStatsEntry OBJECT-TYPE
+          SYNTAX       WlanAPESSIDStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "Access Point ESSID Stats entry"
+          INDEX {wlanAPMacAddress, wlanESSID}
+      ::= { wlsxWlanAPESSIDStatsTable 1 }
+
+   WlanAPESSIDStatsEntry ::=
+     SEQUENCE {
+                 wlanAPESSIDWirelessRxBytes             Counter32,
+                 wlanAPESSIDWirelessTxBytes             Counter32,
+                 wlanAPESSIDWiredRxBytes                Counter32,
+                 wlanAPESSIDWiredTxBytes                Counter32
+   }
+
+   wlanAPESSIDWirelessRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes of correct packets
+                         received from the AP ESSID wireless side.
+            "
+        ::= { wlsxWlanAPESSIDStatsEntry 1 }
+
+   wlanAPESSIDWirelessTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes transmitted
+                         from the AP ESSID wireless side.
+            "
+        ::= { wlsxWlanAPESSIDStatsEntry 2 }
+
+   wlanAPESSIDWiredRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes of correct packets
+                         received from the AP ESSID wired side.
+            "
+        ::= { wlsxWlanAPESSIDStatsEntry 3 }
+
+   wlanAPESSIDWiredTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes transmitted from
+                         the AP ESSID wired side.
+            "
+        ::= { wlsxWlanAPESSIDStatsEntry 4 }
+
+-- AP Radio Stats table
+
+   wlsxWlanAPRadioStatsTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanAPRadioStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists the Radio statistics of all the Access Points
+                         connected to the controller.
+                "
+      ::= { wlsxWlanAccessPointStatsGroup 9 }
+
+   wlsxWlanAPRadioStatsEntry OBJECT-TYPE
+          SYNTAX       WlanAPRadioStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "Access Point Radio Stats entry"
+          INDEX {wlanAPMacAddress, wlanAPRadioNumber}
+      ::= { wlsxWlanAPRadioStatsTable 1 }
+
+   WlanAPRadioStatsEntry ::=
+     SEQUENCE {
+                 wlanAPRadioRxPkts                      Counter32,
+                 wlanAPRadioRxBytes                     Counter64,
+                 wlanAPRadioTxPkts                      Counter32,
+                 wlanAPRadioTxBytes                     Counter64,
+                 wlanAPRadioTxDroppedPkts               Counter32,
+                 wlanAPRadioTxErrorPkts                 Counter32,
+                 wlanAPRadioRxRate                      Gauge32,
+                 wlanAPRadioTxRate                      Gauge32,
+                 wlanApRadioAssocReqCount               Counter32,
+                 wlanApRadioAssocReqSuccCount           Counter32,
+                 wlanApRadioReAssocReqCount             Counter32,
+                 wlanApRadioReAssocReqSuccCount         Counter32,
+                 wlanAPRadioStationDuration             Integer32,
+                 wlanAPRadioAssocSuccPercent            Gauge32,
+                 wlanAPRadioTxDataBytes                 Counter32
+   }
+
+   wlanAPRadioRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total packets transmitted
+                         from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 1 }
+
+   wlanAPRadioRxBytes OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total correct bytes
+                         received from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 2 }
+
+   wlanAPRadioTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total packets
+                         transmitted from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 3 }
+
+   wlanAPRadioTxBytes OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes
+                         transmitted from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 4 }
+
+   wlanAPRadioTxDroppedPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the dropped packets transmitted
+                         from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 5 }
+
+   wlanAPRadioTxErrorPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the error packets
+                         transmitted from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 6 }
+
+   wlanAPRadioRxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the data rate (kbyte/s)
+                         received from AP radio wireless side in sampling interval.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 7 }
+
+   wlanAPRadioTxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the data rate (kbyte/s)
+                         transmitted from AP radio wireless side in sampling interval.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 8 }
+
+    wlanApRadioAssocReqCount OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This attribute indicates the times of associate request on this 
+            radio."
+        ::= { wlsxWlanAPRadioStatsEntry 9 }
+
+    wlanApRadioAssocReqSuccCount OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This attribute indicates the times of successful associate request
+            on this radio."
+        ::= { wlsxWlanAPRadioStatsEntry 10 }
+
+    wlanApRadioReAssocReqCount OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This attribute indicates the times of re-associate request on this
+            radio."
+        ::= { wlsxWlanAPRadioStatsEntry 11 }
+
+    wlanApRadioReAssocReqSuccCount OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "This attribute indicates the times of successful re-associate 
+            request on this radio.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 12 }
+
+    wlanAPRadioStationDuration OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            This attribute indicates the total occupied duration, which is
+            the total duration of user connecting.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 13 }
+
+        wlanAPRadioAssocSuccPercent OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+            The Association Success Percent.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 14 }
+
+   wlanAPRadioTxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total data bytes
+                         transmitted from the AP radio wireless side.
+            "
+        ::= { wlsxWlanAPRadioStatsEntry 15 }
+
+-- AP Wired Port Stats table
+
+   wlsxWlanAPWiredPortStatsTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanAPWiredPortStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists the Wired statistics of all the Access Points
+                         connected to the controller.
+                "
+      ::= { wlsxWlanAccessPointStatsGroup 10 }
+
+   wlsxWlanAPWiredPortStatsEntry OBJECT-TYPE
+          SYNTAX       WlanAPWiredPortStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "Access Point Wired Port Stats entry"
+          INDEX {wlanAPMacAddress, wlanAPPortIndex}
+      ::= { wlsxWlanAPWiredPortStatsTable 1 }
+
+   WlanAPWiredPortStatsEntry ::=
+     SEQUENCE {
+                 wlanAPPortIndex                            Integer32,
+                 wlanAPPortName                             DisplayString,
+                 wlanAPWiredPortRxPkts                      Counter32,
+                 wlanAPWiredPortRxDroppedPkts               Counter32,
+                 wlanAPWiredPortRxErrors                    Counter32,
+                 wlanAPWiredPortRxBytes                     Counter64,
+                 wlanAPWiredPortTxPkts                      Counter32,
+                 wlanAPWiredPortTxDroppedPkts               Counter32,
+                 wlanAPWiredPortTxErrors                    Counter32,
+                 wlanAPWiredPortTxBytes                     Counter64,
+                 wlanAPWiredPortRxRate                      Gauge32,
+                 wlanAPWiredPortTxRate                      Gauge32,
+                 wlanAPWiredPortSpeed                       ArubaPortSpeed
+   }
+
+    wlanAPPortIndex OBJECT-TYPE
+         SYNTAX       Integer32(0..7)
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Wired Port Mac Index (Offset from base Mac Address)
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 1 }
+
+    wlanAPPortName OBJECT-TYPE
+         SYNTAX       DisplayString(SIZE(0..16))
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			AP Wired Port Name
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 2 }
+
+   wlanAPWiredPortRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total packets received from the
+                         AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 3 }
+
+   wlanAPWiredPortRxDroppedPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total dropped packets received
+                         from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 4 }
+
+   wlanAPWiredPortRxErrors OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total number of error packets
+                         received from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 5 }
+
+   wlanAPWiredPortRxBytes OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes of correct packets
+                         received from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 6 }
+
+   wlanAPWiredPortTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total packets transmitted from the
+                         AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 7 }
+
+   wlanAPWiredPortTxDroppedPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total dropped packets transmitted
+                         from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 8 }
+
+   wlanAPWiredPortTxErrors OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total number of error packets
+                         transmitted from the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 9 }
+
+
+   wlanAPWiredPortTxBytes OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the total bytes transmitted from
+                         the AP wired side.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 10 }
+
+   wlanAPWiredPortRxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the data rate (kbyte/s)
+                         received from AP wired side in sampling interval.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 11 }
+
+   wlanAPWiredPortTxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the data rate (kbyte/s)
+                         transmitted from AP wired side in sampling interval.
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 12 }
+
+   wlanAPWiredPortSpeed OBJECT-TYPE
+         SYNTAX       ArubaPortSpeed
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the speed of the port
+            "
+        ::= { wlsxWlanAPWiredPortStatsEntry 13 }
+
+
+-- wlsxWlanStationStatsGroup contains all the statistics observed by different 
+-- Air Monitors attached to this controller. 
+-- Station Statistics are observed by the Air Monitor for that 
+-- specific Station.
+
+-- Station Statistics are grouped into Generic,
+-- Rate, Destination Address and Frame Type Stats.
+
+-- Station Statistics Group contains all the statistics related to 
+-- a Station.
+
+-- wlsxWlanStationStatsTable will contain all the aggregate statistics collected
+-- for a Station
+
+   wlsxWlanStationStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlanStationStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+			This Table lists statistics of all the wireless stations 
+			associated with an AP connected to this controller. 
+		"
+      ::= { wlsxWlanStationStatsGroup 1} 
+
+   wlsxWlanStationStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlanStationStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+             "Station Stats Entry"
+	  INDEX {wlanStaPhyAddress}
+      ::= { wlsxWlanStationStatsTable 1 } 
+
+   WlanStationStatsEntry ::=
+     SEQUENCE {
+		 wlanStaChannelNum				Unsigned32,
+		 wlanStaTxPkts					Counter32,
+		 wlanStaTxBytes					Counter32,
+		 wlanStaRxPkts					Counter32,
+		 wlanStaRxBytes					Counter32,
+		 wlanStaTxBCastPkts				Counter32,
+		 wlanStaRxBCastBytes			Counter32,
+		 wlanStaTxMCastPkts				Counter32,
+		 wlanStaRxMCastBytes			Counter32,
+		 wlanStaDataPkts				Counter32,
+		 wlanStaCtrlPkts				Counter32,
+		 wlanStaNumAssocRequests		Counter32,
+		 wlanStaNumAuthRequests			Counter32,
+		 wlanStaTxDeauthentications		Counter32,
+		 wlanStaRxDeauthentications		Counter32,
+		 wlanStaFrameRetryRate			Integer32,
+		 wlanStaFrameLowSpeedRate		Integer32,
+		 wlanStaFrameNonUnicastRate		Integer32,
+		 wlanStaFrameFragmentationRate	Integer32,
+		 wlanStaFrameBandwidthRate		Integer32,
+		 wlanStaFrameRetryErrorRate		Integer32,
+		 wlanStaFrameReceiveErrorRate	Integer32,
+		 wlanStaTxBCastBytes			Counter32,
+		 wlanStaTxMCastBytes			Counter32,
+		 wlanStaTxBytes64				Counter64,
+		 wlanStaRxBytes64				Counter64
+   }
+
+	wlanStaChannelNum OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The channel the station is currently using.
+            "
+        ::= { wlsxWlanStationStatsEntry 1 }
+
+	wlanStaTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 2 }
+
+	wlanStaTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 3 }
+
+	wlanStaRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of packets received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 4 }
+
+	wlanStaRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 5 }
+
+	wlanStaTxBCastPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of broadcast packets transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 6 }
+
+	wlanStaRxBCastBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS  	  deprecated
+         DESCRIPTION
+            "
+			The number of broadcast bytes transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 7 }
+
+	wlanStaTxMCastPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of multicast packets transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 8 }
+
+	wlanStaRxMCastBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS  	  deprecated
+         DESCRIPTION
+            "
+			The number of multicast bytes transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 9 }
+
+	wlanStaDataPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The total number of Data packets transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 10 }
+
+	wlanStaCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The total number of Control packets transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 11 }
+
+	wlanStaNumAssocRequests OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of Association requests transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 12 }
+
+	wlanStaNumAuthRequests OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of Authentication requests transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 13 }
+
+	wlanStaTxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of Deauthentication frames transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 14 }
+
+	wlanStaRxDeauthentications OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of Deauthentication frames received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 15 }
+
+	wlanStaFrameRetryRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of retry 
+			 packets as a percentage of the total packets
+			 transmitted and received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 16 }
+
+	wlanStaFrameLowSpeedRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps
+			 for B band) packets as a percentage of the total packets
+			 transmitted and received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 17 }
+
+	wlanStaFrameNonUnicastRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of broadcast and multicast
+			 packets as a percentage of the total packets
+			 transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 18 }
+
+	wlanStaFrameFragmentationRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of fragments
+			 as a percentage of the total packets
+			 transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 19 }
+
+	wlanStaFrameBandwidthRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The bandwidth of this station in Kbps.
+            "
+        ::= { wlsxWlanStationStatsEntry 20 }
+
+	wlanStaFrameRetryErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS  	  deprecated
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 21 }
+
+	wlanStaFrameReceiveErrorRate OBJECT-TYPE
+         SYNTAX       Integer32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 The number of error packets
+			 as a percentage of the total packets
+			 received by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 22 }
+
+	wlanStaTxBCastBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of broadcast bytes transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 23 }
+
+	wlanStaTxMCastBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of multicast bytes transmitted by this station.
+            "
+        ::= { wlsxWlanStationStatsEntry 24 }
+
+	wlanStaTxBytes64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes transmitted by this station, 64-bit value
+            "
+        ::= { wlsxWlanStationStatsEntry 25 }
+
+	wlanStaRxBytes64 OBJECT-TYPE
+         SYNTAX       Counter64
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			The number of bytes received by this station, 64-bit value
+            "
+        ::= { wlsxWlanStationStatsEntry 26 }
+
+
+-- This table breaks down the Station statistics into different
+-- rate categories.
+
+   wlsxWlanStaRateStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanStaRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for a station
+		represented in terms of rate categories.
+		"
+      ::= { wlsxWlanStationStatsGroup 2} 
+
+     wlsxWlanStaRateStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanStaRateStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Data rate based packet and byte count entry for a station"
+	  INDEX {wlanStaPhyAddress}
+      ::= { wlsxWlanStaRateStatsTable 1 } 
+	
+     WlsxWlanStaRateStatsEntry ::=
+     SEQUENCE {
+		 wlanStaTxPktsAt1Mbps			Counter32,
+		 wlanStaTxBytesAt1Mbps			Counter32,
+		 wlanStaTxPktsAt2Mbps			Counter32,
+		 wlanStaTxBytesAt2Mbps			Counter32,
+		 wlanStaTxPktsAt5Mbps			Counter32,
+		 wlanStaTxBytesAt5Mbps			Counter32,
+		 wlanStaTxPktsAt11Mbps			Counter32,
+		 wlanStaTxBytesAt11Mbps			Counter32,
+		 wlanStaTxPktsAt6Mbps			Counter32,
+		 wlanStaTxBytesAt6Mbps			Counter32,
+		 wlanStaTxPktsAt12Mbps			Counter32,
+		 wlanStaTxBytesAt12Mbps			Counter32,
+		 wlanStaTxPktsAt18Mbps			Counter32,
+		 wlanStaTxBytesAt18Mbps			Counter32,
+		 wlanStaTxPktsAt24Mbps			Counter32,
+		 wlanStaTxBytesAt24Mbps			Counter32,
+		 wlanStaTxPktsAt36Mbps			Counter32,
+		 wlanStaTxBytesAt36Mbps			Counter32,
+		 wlanStaTxPktsAt48Mbps			Counter32,
+		 wlanStaTxBytesAt48Mbps			Counter32,
+		 wlanStaTxPktsAt54Mbps			Counter32,
+		 wlanStaTxBytesAt54Mbps			Counter32,
+		 wlanStaRxPktsAt1Mbps			Counter32,
+		 wlanStaRxBytesAt1Mbps			Counter32,
+		 wlanStaRxPktsAt2Mbps			Counter32,
+		 wlanStaRxBytesAt2Mbps			Counter32,
+		 wlanStaRxPktsAt5Mbps			Counter32,
+		 wlanStaRxBytesAt5Mbps			Counter32,
+		 wlanStaRxPktsAt11Mbps			Counter32,
+		 wlanStaRxBytesAt11Mbps			Counter32,
+		 wlanStaRxPktsAt6Mbps			Counter32,
+		 wlanStaRxBytesAt6Mbps			Counter32,
+		 wlanStaRxPktsAt12Mbps			Counter32,
+		 wlanStaRxBytesAt12Mbps			Counter32,
+		 wlanStaRxPktsAt18Mbps			Counter32,
+		 wlanStaRxBytesAt18Mbps			Counter32,
+		 wlanStaRxPktsAt24Mbps			Counter32,
+		 wlanStaRxBytesAt24Mbps			Counter32,
+		 wlanStaRxPktsAt36Mbps			Counter32,
+		 wlanStaRxBytesAt36Mbps			Counter32,
+		 wlanStaRxPktsAt48Mbps			Counter32,
+		 wlanStaRxBytesAt48Mbps			Counter32,
+		 wlanStaRxPktsAt54Mbps			Counter32,
+		 wlanStaRxBytesAt54Mbps			Counter32,
+		 wlanStaTxPktsAt9Mbps			Counter32,
+		 wlanStaTxBytesAt9Mbps			Counter32,
+		 wlanStaRxPktsAt9Mbps			Counter32,
+		 wlanStaRxBytesAt9Mbps			Counter32
+     }
+
+     wlanStaTxPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 1 }
+
+     wlanStaTxBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 2 }
+
+     wlanStaTxPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 3 }
+
+     wlanStaTxBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 4 }
+
+     wlanStaTxPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 5 }
+
+     wlanStaTxBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 6 }
+
+     wlanStaTxPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 7 }
+
+     wlanStaTxBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 8 }
+
+     wlanStaTxPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 9 }
+
+     wlanStaTxBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 10 }
+
+     wlanStaTxPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 11 }
+
+     wlanStaTxBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 12 }
+
+     wlanStaTxPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 13 }
+
+     wlanStaTxBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 14 }
+
+     wlanStaTxPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 15 }
+
+     wlanStaTxBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 16 }
+
+     wlanStaTxPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 17 }
+
+     wlanStaTxBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 18 }
+
+     wlanStaTxPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 19 }
+
+     wlanStaTxBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 20 }
+
+     wlanStaTxPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 21 }
+
+     wlanStaTxBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 22 }
+
+     wlanStaRxPktsAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 23 }
+
+     wlanStaRxBytesAt1Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 1Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 24 }
+
+     wlanStaRxPktsAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 25 }
+
+     wlanStaRxBytesAt2Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 2Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 26 }
+
+     wlanStaRxPktsAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 27 }
+
+     wlanStaRxBytesAt5Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 5Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 28 }
+
+     wlanStaRxPktsAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 29 }
+
+     wlanStaRxBytesAt11Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 11Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 30 }
+
+     wlanStaRxPktsAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 31 }
+
+     wlanStaRxBytesAt6Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 6Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 32 }
+
+     wlanStaRxPktsAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 33 }
+
+     wlanStaRxBytesAt12Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 12Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 34 }
+
+     wlanStaRxPktsAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 35 }
+
+     wlanStaRxBytesAt18Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 18Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 36 }
+
+     wlanStaRxPktsAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 37 }
+
+     wlanStaRxBytesAt24Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 24Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 38 }
+
+     wlanStaRxPktsAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 39 }
+
+     wlanStaRxBytesAt36Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 36Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 40 }
+
+     wlanStaRxPktsAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 41 }
+
+     wlanStaRxBytesAt48Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 48Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 42 }
+
+     wlanStaRxPktsAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 43 }
+
+     wlanStaRxBytesAt54Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 54Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 44 }
+
+     wlanStaTxPktsAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Transmitted by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 45 }
+
+     wlanStaTxBytesAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Transmitted by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 46 }
+
+
+     wlanStaRxPktsAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Packets Received by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 47 }
+
+     wlanStaRxBytesAt9Mbps OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Octets Received by the 
+			 station at 9Mbps rate.
+            "
+        ::= { wlsxWlanStaRateStatsEntry 48 }
+
+-- This table breaks down the Station statistics based on the
+-- Destination Address Types. 
+
+   wlsxWlanStaDATypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanStaDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for a station but
+		but broken down in terms of Destination Address Type. 
+		"
+      ::= { wlsxWlanStationStatsGroup 3} 
+
+     wlsxWlanStaDATypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanStaDATypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "
+			  Destination Address based packet and byte count entry for a
+			  station
+			 "
+	  INDEX {wlanStaPhyAddress}
+      ::= { wlsxWlanStaDATypeStatsTable 1 } 
+	
+     WlsxWlanStaDATypeStatsEntry ::=
+     SEQUENCE {
+		 wlanStaTxDABroadcastPkts		Counter32  ,
+		 wlanStaTxDABroadcastBytes		Counter32  ,
+		 wlanStaTxDAMulticastPkts		Counter32  ,
+		 wlanStaTxDAMulticastBytes		Counter32  ,
+		 wlanStaTxDAUnicastPkts			Counter32  ,
+		 wlanStaTxDAUnicastBytes		Counter32  
+
+     }
+
+     wlanStaTxDABroadcastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Broadcast packets 
+			 transmitted by this Station.
+            "
+        ::= { wlsxWlanStaDATypeStatsEntry 1 }
+
+     wlanStaTxDABroadcastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Broadcast Bytes 
+			 transmitted by this Station.
+            "
+        ::= { wlsxWlanStaDATypeStatsEntry 2 }
+
+     wlanStaTxDAMulticastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Multicast packets 
+			 transmitted by this station.
+            "
+        ::= { wlsxWlanStaDATypeStatsEntry 3 }
+
+     wlanStaTxDAMulticastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of Multicast Bytes 
+			 transmitted by this station.
+            "
+        ::= { wlsxWlanStaDATypeStatsEntry 4 }
+
+     wlanStaTxDAUnicastPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total of Unicast packets 
+			 transmitted by this station.
+            "
+        ::= { wlsxWlanStaDATypeStatsEntry 5 }
+
+     wlanStaTxDAUnicastBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the total of Unicast Bytes 
+			 transmitted by this station.
+            "
+        ::= { wlsxWlanStaDATypeStatsEntry 6 }
+
+-- This table breaks down the Station statistics based on the
+-- the Type of the Packet. 
+
+   wlsxWlanStaFrameTypeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanStaFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the Packet and Byte Counts for stations
+		but broken down into different Frame Types. 
+		"
+      ::= { wlsxWlanStationStatsGroup 4} 
+
+     wlsxWlanStaFrameTypeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanStaFrameTypeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Frame Type based packet and byte count entry for a station"
+	  INDEX {wlanStaPhyAddress}
+      ::= { wlsxWlanStaFrameTypeStatsTable 1 } 
+	
+     WlsxWlanStaFrameTypeStatsEntry ::=
+     SEQUENCE {
+		 wlanStaTxMgmtPkts		Counter32  ,
+		 wlanStaTxMgmtBytes		Counter32  ,
+		 wlanStaTxCtrlPkts		Counter32  ,
+		 wlanStaTxCtrlBytes		Counter32  ,
+		 wlanStaTxDataPkts		Counter32  ,
+		 wlanStaTxDataBytes		Counter32  ,
+		 wlanStaRxMgmtPkts		Counter32  ,
+		 wlanStaRxMgmtBytes		Counter32  ,
+		 wlanStaRxCtrlPkts		Counter32  ,
+		 wlanStaRxCtrlBytes		Counter32  ,
+		 wlanStaRxDataPkts		Counter32  ,
+		 wlanStaRxDataBytes		Counter32  
+
+     }
+
+     wlanStaTxMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Management packets 
+			 from a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 1 }
+
+     wlanStaTxMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Management Bytes 
+			 from a station
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 2 }
+
+     wlanStaTxCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Control packets 
+			 from a station
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 3 }
+
+     wlanStaTxCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Control Bytes 
+			 from a station
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 4 }
+
+     wlanStaTxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Data packets 
+			 from a station
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 5 }
+
+     wlanStaTxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the Transmitted Data Bytes 
+			 observed on this channel.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 6 }
+
+     wlanStaRxMgmtPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Management packets 
+			 at a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 7 }
+
+     wlanStaRxMgmtBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Management Bytes 
+			 at a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 8 }
+
+     wlanStaRxCtrlPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Control packets 
+			 at a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 9 }
+
+     wlanStaRxCtrlBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Control Bytes 
+			 at a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 10 }
+
+     wlanStaRxDataPkts OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Data packets 
+			 at a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 11 }
+
+     wlanStaRxDataBytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of received Data Bytes 
+			 at a station.
+            "
+        ::= { wlsxWlanStaFrameTypeStatsEntry 12 }
+
+
+-- This table breaks down the Station statistics received or transmitted by a 
+-- station into packet size buckets. 
+
+   wlsxWlanStaPktSizeStatsTable  OBJECT-TYPE 
+	  SYNTAX       SEQUENCE OF WlsxWlanStaPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+	  	"
+		This table contains all the  Packet and Byte Counts for stations
+		but broken down into different Packet Sizes. 
+		"
+      ::= { wlsxWlanStationStatsGroup 5} 
+
+     wlsxWlanStaPktSizeStatsEntry OBJECT-TYPE 
+	  SYNTAX       WlsxWlanStaPktSizeStatsEntry 
+	  MAX-ACCESS   not-accessible		
+      STATUS       current 
+      DESCRIPTION 
+			 "Packet Size based packet count entry for a station"
+	  INDEX {wlanStaPhyAddress}
+      ::= { wlsxWlanStaPktSizeStatsTable 1 } 
+	
+     WlsxWlanStaPktSizeStatsEntry ::=
+     SEQUENCE {
+		 wlanStaTxPkts63Bytes		Counter32  ,
+		 wlanStaTxPkts64To127		Counter32  ,
+		 wlanStaTxPkts128To255		Counter32  ,
+		 wlanStaTxPkts256To511		Counter32  ,
+		 wlanStaTxPkts512To1023	Counter32  ,
+		 wlanStaTxPkts1024To1518	Counter32  ,
+		 wlanStaRxPkts63Bytes		Counter32  ,
+		 wlanStaRxPkts64To127		Counter32  ,
+		 wlanStaRxPkts128To255		Counter32  ,
+		 wlanStaRxPkts256To511		Counter32  ,
+		 wlanStaRxPkts512To1023	Counter32  ,
+		 wlanStaRxPkts1024To1518	Counter32  
+
+     }
+
+     wlanStaTxPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were less than 64 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 1 }
+
+     wlanStaTxPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 64 and 127 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 2 }
+
+     wlanStaTxPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 128 and 255 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 3 }
+
+     wlanStaTxPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 256 and 511 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 4 }
+
+     wlanStaTxPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 5 }
+
+     wlanStaTxPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets transmitted by the 
+			 station that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 6 }
+
+     wlanStaRxPkts63Bytes OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were less than 64 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 7 }
+
+     wlanStaRxPkts64To127 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 64 and 127 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 8 }
+
+     wlanStaRxPkts128To255 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 128 and 255 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 9 }
+
+     wlanStaRxPkts256To511 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 256 and 511 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 10 }
+
+     wlanStaRxPkts512To1023 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 512 and 1023 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 11 }
+
+     wlanStaRxPkts1024To1518 OBJECT-TYPE
+         SYNTAX       Counter32  
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+			 This attribute indicates the number of packets Received by the 
+			 station that were between 1024 and 1518 bytes long.
+            "
+        ::= { wlsxWlanStaPktSizeStatsEntry 12 }
+
+-- wlsxWlanSwitchStatsGroup contains all statistics related to
+-- the whole network controlled by the controller.
+
+-- wlsxWlanESSIDStatsTable contains all statistics collected
+-- for an ESSID on the switch
+
+   wlsxWlanESSIDStatsTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanESSIDStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists statistics of the ESSID
+                        controlled by this controller.
+                "
+      ::= { wlsxWlanSwitchStatsGroup 1}
+
+   wlsxWlanESSIDStatsEntry OBJECT-TYPE
+          SYNTAX       WlanESSIDStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "ESSID Stats Entry"
+          INDEX {wlanESSID}
+      ::= { wlsxWlanESSIDStatsTable 1 }
+
+   WlanESSIDStatsEntry ::=
+     SEQUENCE {
+                 wlanESSIDRxPkts                           Counter32,
+                 wlanESSIDRxDroppedPkts                    Counter32,
+                 wlanESSIDRxRetryPkts                      Counter32,
+                 wlanESSIDTxPkts                           Counter32,
+                 wlanESSIDTxDroppedPkts                    Counter32,
+                 wlanESSIDTxRetryPkts                      Counter32,
+                 wlanESSIDTxErrorPkts                      Counter32,
+                 wlanESSIDRxRate                           Gauge32,
+                 wlanESSIDTxRate                           Gauge32,
+                 wlanESSIDWiredRxPkts                      Counter32,
+                 wlanESSIDWiredRxBytes                     Counter32,
+                 wlanESSIDWiredTxBytes                     Counter32
+   }
+
+        wlanESSIDRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of packets on the ESSID uplink channel
+                         of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 1 }
+
+        wlanESSIDRxDroppedPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of dropped packets on the ESSID uplink
+                         channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 2 }
+
+        wlanESSIDRxRetryPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of re-transmission packets on the ESSID
+                         uplink channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 3 }
+
+        wlanESSIDTxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of packets on the ESSID downlink channel
+                         of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 4 }
+
+        wlanESSIDTxDroppedPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of dropped packets on the ESSID downlink
+                         channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 5 }
+
+        wlanESSIDTxRetryPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of re-transmission packets on the ESSID
+                         downlink channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 6 }
+
+        wlanESSIDTxErrorPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of error packets on the ESSID downlink
+                         channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 7 }
+
+        wlanESSIDRxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The data rate received from the ESSID in sampling interval,
+                         unit is kbyte/s.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 8 }
+
+        wlanESSIDTxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The data rate transmitted from the ESSID in sampling interval,
+                         unit is kbyte/s.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 9 }
+
+        wlanESSIDWiredRxPkts OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of packets on the ESSID uplink
+                         channel of wired side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 10 }
+
+        wlanESSIDWiredRxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of bytes on the ESSID uplink
+                         channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 11 }
+
+        wlanESSIDWiredTxBytes OBJECT-TYPE
+         SYNTAX       Counter32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The total number of bytes on the ESSID downlink
+                         channel of wireless side.
+            "
+        ::= { wlsxWlanESSIDStatsEntry 12 }
+
+-- wlsxWlanEthStatsTable will contain all the statistics collected
+-- for all ethernet ports
+
+   wlsxWlanEthStatsTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanEthStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists statistics of all ethernet ports
+                        of this controller.
+                "
+      ::= { wlsxWlanSwitchStatsGroup 2}
+
+   wlsxWlanEthStatsEntry OBJECT-TYPE
+          SYNTAX       WlanEthStatsEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "Ethernet Port Stats Entry"
+          INDEX {ifIndex}
+      ::= { wlsxWlanEthStatsTable 1 }
+
+   WlanEthStatsEntry ::=
+     SEQUENCE {
+                 wlanEthRxRate                           Gauge32,
+                 wlanEthTxRate                           Gauge32
+   }
+
+        wlanEthRxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The data rate received from the ethernet port in sampling interval,
+                         unit is kbyte/s.
+            "
+        ::= { wlsxWlanEthStatsEntry 1 }
+
+        wlanEthTxRate OBJECT-TYPE
+         SYNTAX       Gauge32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The data rate transmitted from the ethernet port in sampling interval,
+                         unit is kbyte/s.
+            "
+        ::= { wlsxWlanEthStatsEntry 2 }
+
+-- wlsxSSIDConfigGroup contains all configuration related to
+-- the SSID controlled by the controller.
+
+-- wlsxSSIDConfigTable contains the global configuration of the SSID
+
+   wlsxSSIDConfigTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanSSIDConfigEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists the configuration of the SSID.
+                        Note: Currently, this table doesn't return any data.
+                "
+      ::= { wlsxSSIDConfigGroup 1}
+
+   wlsxSSIDConfigEntry OBJECT-TYPE
+          SYNTAX       WlanSSIDConfigEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "AP Configuration Entry"
+          INDEX {wlanAPMacAddress, wlanAPRadioNumber, wlanESSID, wlanESSIDIndex}
+      ::= { wlsxSSIDConfigTable 1 }
+
+   WlanSSIDConfigEntry ::=
+     SEQUENCE {
+                 wlanESSIDIndex                              Integer32,
+                 wlanSSIDConfigHideSSID                      TruthValue,
+                 wlanSSIDConfigNumStaAllowed                 Unsigned32,
+                 wlanSSIDConfigWmmBeDscp                     Unsigned32,
+                 wlanSSIDConfigWmmBkDscp                     Unsigned32,
+                 wlanSSIDConfigWmmViDscp                     Unsigned32,
+                 wlanSSIDConfigWmmVoDscp                     Unsigned32
+   }
+
+        wlanESSIDIndex OBJECT-TYPE
+         SYNTAX       Integer32(1..16)
+         MAX-ACCESS   not-accessible
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the index of ESSID. We support up to 16 ESSIDs.
+            "
+        ::= { wlsxSSIDConfigEntry 1 }
+
+        wlanSSIDConfigHideSSID OBJECT-TYPE
+         SYNTAX       TruthValue
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates if SSID is hidden or not.
+            "
+        ::= { wlsxSSIDConfigEntry 2 }
+
+        wlanSSIDConfigNumStaAllowed OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the maximum number of stations that are allowed to access into the network.
+            "
+        ::= { wlsxSSIDConfigEntry 3 }
+
+        wlanSSIDConfigWmmBeDscp OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the QoS priority of best-effort service.
+            "
+        ::= { wlsxSSIDConfigEntry 4 }
+
+        wlanSSIDConfigWmmBkDscp OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the QoS priority of background service.
+            "
+        ::= { wlsxSSIDConfigEntry 5 }
+
+        wlanSSIDConfigWmmViDscp OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the QoS priority of video service.
+            "
+        ::= { wlsxSSIDConfigEntry 6 }
+
+        wlanSSIDConfigWmmVoDscp OBJECT-TYPE
+         SYNTAX       Unsigned32
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        This attribute indicates the QoS priority of voice service.
+            "
+        ::= { wlsxSSIDConfigEntry 7 }
+
+-- wlsxAPConfigGroup contains all configuration related to
+-- the APs controlled by the controller.
+
+-- wlsxAPConfigTable contains the global configuration of the AP
+
+   wlsxAPConfigTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF WlanAPConfigEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+                "
+                        This Table lists the configuration of the Access Point.
+                "
+      ::= { wlsxAPConfigGroup 1}
+
+   wlsxAPConfigEntry OBJECT-TYPE
+          SYNTAX       WlanAPConfigEntry
+          MAX-ACCESS   not-accessible
+      STATUS       current
+      DESCRIPTION
+             "AP Configuration Entry"
+          INDEX {wlanAPMacAddress}
+      ::= { wlsxAPConfigTable 1 }
+
+   WlanAPConfigEntry ::=
+     SEQUENCE {
+                 wlanAPConfigNetmask                       IpAddress,
+                 wlanAPConfigGateway                       IpAddress
+   }
+
+        wlanAPConfigNetmask OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The netmask of AP IP Address.
+            "
+        ::= { wlsxAPConfigEntry 1 }
+
+        wlanAPConfigGateway OBJECT-TYPE
+         SYNTAX       IpAddress
+         MAX-ACCESS   read-only
+         STATUS       current
+         DESCRIPTION
+            "
+                        The gateway of the AP.
+            "
+        ::= { wlsxAPConfigEntry 2 }
+
+        --Trap Definition
+         wlsxRAPActiveUplink NOTIFICATION-TYPE
+         OBJECTS {wlanAPActiveUplink, wlanAPMacAddress}
+         STATUS  current
+         DESCRIPTION
+                         "A trap which indicates the RAP Active Uplink"
+         ::= { wlsxRAPTraps 1 }
+END