summaryrefslogtreecommitdiff
path: root/MIBS/arubaos/WLSX-SWITCH-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/arubaos/WLSX-SWITCH-MIB')
-rw-r--r--MIBS/arubaos/WLSX-SWITCH-MIB2514
1 files changed, 2514 insertions, 0 deletions
diff --git a/MIBS/arubaos/WLSX-SWITCH-MIB b/MIBS/arubaos/WLSX-SWITCH-MIB
new file mode 100644
index 0000000..461e393
--- /dev/null
+++ b/MIBS/arubaos/WLSX-SWITCH-MIB
@@ -0,0 +1,2514 @@
+--- ArubaOS 8.8.0.1_80393
+-- vim:set ts=4 sw=4:
+ WLSX-SWITCH-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ TEXTUAL-CONVENTION FROM SNMPv2-TC
+
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ snmpModules,
+ Integer32,
+ Counter32,
+ IpAddress,
+ NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+
+ TDomain,
+ DisplayString,
+ PhysAddress,
+ TAddress,
+ TimeInterval,
+ RowStatus,
+ StorageType,
+ TestAndIncr,
+ MacAddress,
+ TruthValue
+ FROM SNMPv2-TC
+
+ OBJECT-GROUP
+ FROM SNMPv2-CONF
+ wlsxEnterpriseMibModules
+ FROM ARUBA-MIB;
+
+ wlsxSwitchMIB MODULE-IDENTITY
+ LAST-UPDATED "202008141745Z"
+ ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
+ CONTACT-INFO
+ "Postal: 3333 Scott Blvd,
+ Santa Clara, CA 95054
+ E-mail: aruba-ext-eng-reg@hpe.com
+ Phone: 408 227 4500
+ Fax: 408 752 0626"
+ DESCRIPTION
+ "This MIB module defines MIB objects which provide
+ System level information about the Aruba switches."
+ REVISION "202008141745Z"
+ DESCRIPTION
+ "The initial revision."
+ ::= { wlsxEnterpriseMibModules 1 }
+
+ wlsxSystemXGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 1 }
+ wlsxUserInfoGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 2 }
+ wlsxAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 3 }
+ wlsxInstantAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 5 }
+ wlsxSwitchTraps OBJECT IDENTIFIER ::= { wlsxSwitchMIB 100 }
+
+ -- wlsxSystemXGroup contains objects to describe a switch.
+
+ wlsxHostname OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the switch."
+ ::= { wlsxSystemXGroup 1 }
+
+ wlsxModelName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Model Name of the switch."
+ ::= { wlsxSystemXGroup 2 }
+
+ wlsxSwitchIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Switch IP as configured by the user. This IP address uniquely
+ identifies the switch."
+ ::= { wlsxSystemXGroup 3 }
+
+ wlsxSwitchRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(1),
+ local(2),
+ standbymaster(3),
+ branch(4),
+ md(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Role of this switch in the Switch Domain."
+ ::= { wlsxSystemXGroup 4 }
+
+ wlsxSwitchMasterIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Master IP of the switch
+ "
+ ::= { wlsxSystemXGroup 5 }
+
+
+-- Switch List Table contains all the switches in the domain. This table is
+-- valid only when queried from the master switch.
+
+ wlsxSwitchListTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This Table will list all the switches in the Switch Domain.
+ It will be populated only on the master switch. Local switches
+ return empty table.
+ "
+
+ ::= { wlsxSystemXGroup 6 }
+
+ wlsxSwitchListEntry OBJECT-TYPE
+ SYNTAX MxSwitchListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch List Entry"
+ INDEX { switchListSwitchIPAddress}
+ ::= { wlsxSwitchListTable 1 }
+
+ MxSwitchListEntry ::=
+ SEQUENCE {
+ switchListSwitchIPAddress IpAddress,
+ switchListSwitchRole INTEGER
+ }
+
+ switchListSwitchIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ IP Address of the switch.
+ "
+ ::= { wlsxSwitchListEntry 1 }
+
+ switchListSwitchRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ master(1),
+ local(2),
+ standbymaster(3),
+ branch(4),
+ md(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Role of the Switch.
+ "
+ ::= { wlsxSwitchListEntry 2 }
+
+
+ wlsxSwitchLicenseCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The number of licenses installed on the switch
+ "
+ ::= { wlsxSystemXGroup 7 }
+
+
+-- The license table lists all valid licenses installed on the switch
+
+ wlsxSwitchLicenseTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LicenseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table lists all licenses installed on the switch.
+ "
+
+ ::= { wlsxSystemXGroup 8 }
+
+ wlsxLicenseEntry OBJECT-TYPE
+ SYNTAX LicenseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "License Entry"
+ INDEX { licenseIndex }
+ ::= { wlsxSwitchLicenseTable 1 }
+
+ LicenseEntry ::=
+ SEQUENCE {
+ licenseIndex Integer32,
+ licenseKey DisplayString,
+ licenseInstalled DisplayString,
+ licenseExpires DisplayString,
+ licenseFlags DisplayString,
+ licenseService DisplayString
+ }
+
+ licenseIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ License ID number
+ "
+ ::= { wlsxLicenseEntry 1 }
+
+ licenseKey OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ License Key
+ "
+ ::= { wlsxLicenseEntry 2 }
+
+ licenseInstalled OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ License installation time
+ "
+ ::= { wlsxLicenseEntry 3 }
+
+ licenseExpires OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ License expiry time
+ "
+ ::= { wlsxLicenseEntry 4 }
+
+ licenseFlags OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ License flags; E - enabled; A - auto-generated;
+ R - reboot required to activate
+ "
+ ::= { wlsxLicenseEntry 5 }
+
+ licenseService OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The service enabled by this license.
+ "
+ ::= { wlsxLicenseEntry 6 }
+
+-- Table lists all the processors and there corresponding Load.
+
+ wlsxSysXProcessorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WlsxSysXProcessorEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ The table of processors contained by the switch.
+ "
+ ::= { wlsxSystemXGroup 9 }
+
+ wlsxSysXProcessorEntry OBJECT-TYPE
+ SYNTAX WlsxSysXProcessorEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ An entry for one processor contained by the switch.
+ "
+ INDEX { sysXProcessorID}
+ ::= { wlsxSysXProcessorTable 1 }
+
+ WlsxSysXProcessorEntry ::=
+ SEQUENCE {
+ sysXProcessorID Integer32,
+ sysXProcessorDescr DisplayString,
+ sysXProcessorLoad Integer32
+ }
+
+ sysXProcessorID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Processor Index.
+ "
+ ::= { wlsxSysXProcessorEntry 1 }
+
+ sysXProcessorDescr OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ description of the processor.
+ "
+ ::= { wlsxSysXProcessorEntry 2 }
+
+ sysXProcessorLoad OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The average, over the last minute, of the percentage of
+ time that this processor was not idle.
+ "
+ ::= { wlsxSysXProcessorEntry 3 }
+
+-- Table contains all the storage devices in the switch and there
+-- utilization numbers.
+
+ wlsxSysXStorageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WlsxSysXStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ The table of Storage-devices contained by the switch.
+ "
+
+ ::= { wlsxSystemXGroup 10 }
+
+ wlsxSysXStorageEntry OBJECT-TYPE
+ SYNTAX WlsxSysXStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ An entry for one long-term storage device contained by the
+ switch.
+ "
+ INDEX { sysXStorageIndex }
+ ::= { wlsxSysXStorageTable 1 }
+
+ WlsxSysXStorageEntry ::=
+ SEQUENCE {
+ sysXStorageIndex Integer32,
+ sysXStorageType INTEGER,
+ sysXStorageSize Integer32,
+ sysXStorageUsed Integer32,
+ sysXStorageName DisplayString
+ }
+
+ sysXStorageIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ "
+ ::= { wlsxSysXStorageEntry 1 }
+
+ sysXStorageType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ram(1),
+ flashMemory(2)
+ }
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ "
+ ::= { wlsxSysXStorageEntry 2 }
+
+ sysXStorageSize OBJECT-TYPE
+ SYNTAX Integer32
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ size of the storage filesystem in MB.
+ "
+ ::= { wlsxSysXStorageEntry 3 }
+
+ sysXStorageUsed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ size of the storage filesystem in MB.
+ "
+ ::= { wlsxSysXStorageEntry 4 }
+
+ sysXStorageName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ name of the storage filesystem.
+ "
+ ::= { wlsxSysXStorageEntry 5 }
+
+-- This table describes the memory utilization of the switch
+
+ wlsxSysXMemoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF WlsxSysXMemoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ The memory status of the switch
+ "
+
+ ::= { wlsxSystemXGroup 11 }
+
+ wlsxSysXMemoryEntry OBJECT-TYPE
+ SYNTAX WlsxSysXMemoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ An entry for one memory region on the switch. Currently,
+ only the CP region is monitored.
+ "
+ INDEX { sysXMemoryIndex }
+ ::= { wlsxSysXMemoryTable 1 }
+
+ WlsxSysXMemoryEntry ::=
+ SEQUENCE {
+ sysXMemoryIndex Integer32,
+ sysXMemorySize Integer32,
+ sysXMemoryUsed Integer32,
+ sysXMemoryFree Integer32
+ }
+
+ sysXMemoryIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ "
+ ::= { wlsxSysXMemoryEntry 1 }
+
+ sysXMemorySize OBJECT-TYPE
+ SYNTAX Integer32
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total memory in KB.
+ "
+ ::= { wlsxSysXMemoryEntry 2 }
+
+ sysXMemoryUsed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Used memory in KB.
+ "
+ ::= { wlsxSysXMemoryEntry 3 }
+
+ sysXMemoryFree OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Free memory in KB.
+ "
+ ::= { wlsxSysXMemoryEntry 4 }
+
+ wlsxSwitchLicenseSerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The license serial number of the switch
+ "
+ ::= { wlsxSystemXGroup 12 }
+
+ wlsxSwitchIpv6 OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Switch IPv6 as configured by the user. This IPv6 address uniquely
+ identifies the switch."
+ ::= { wlsxSystemXGroup 13 }
+
+ wlsxSwitchMasterIpv6 OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..45))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Master IPv6 address of the switch
+ "
+ ::= { wlsxSystemXGroup 14 }
+
+-- wlsxUserInfoGroup contains information about the users connected to the switch.
+
+ wlsxSwitchUserTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchUserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This Table lists all the users (both wired and wireless) currently
+ connected to the switch. Users are identified by their IP address.
+ "
+
+ ::= { wlsxUserInfoGroup 1 }
+
+ wlsxSwitchUserEntry OBJECT-TYPE
+ SYNTAX MxSwitchUserEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User Entry"
+ INDEX { userIpAddress}
+ ::= { wlsxSwitchUserTable 1 }
+
+ MxSwitchUserEntry ::=
+ SEQUENCE {
+ userIpAddress IpAddress,
+ userPhyAddress MacAddress,
+ userName DisplayString,
+ userRole DisplayString,
+ userUpTime TimeTicks,
+ userAuthenticationMethod INTEGER,
+ userLocation DisplayString,
+ userServerName DisplayString,
+ userConnectedVlan Integer32,
+ userConnectedSlot Integer32,
+ userConnectedPort Integer32,
+ userBWContractName DisplayString,
+ userBWContractUsage INTEGER,
+ userConnectedModule INTEGER
+
+ }
+
+ userIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ IP Address from which the user connected to the switch.
+ "
+ ::= { wlsxSwitchUserEntry 1 }
+
+ userPhyAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Physical Address of the station from which the user connected to
+ the switch.
+ "
+ ::= { wlsxSwitchUserEntry 2 }
+
+ userName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Name of the User.
+ "
+ ::= { wlsxSwitchUserEntry 3 }
+
+ userRole OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The Role configured for this user.
+ "
+ ::= { wlsxSwitchUserEntry 4 }
+
+
+ userUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Time since the user is connected to the switch.
+ "
+ ::= { wlsxSwitchUserEntry 5 }
+
+ userAuthenticationMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ other(2),
+ web(3),
+ dot1x(4),
+ vpn(5),
+ mac(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Authentication mechanism used by the user to connect to the switch.
+ "
+ ::= { wlsxSwitchUserEntry 6 }
+
+ userLocation OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Location of the access point (in Building.Floor.... format), which
+ the user used to connect to the switch.
+ "
+ ::= { wlsxSwitchUserEntry 7 }
+
+ userServerName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Name of the Back-end authentication server, used to authenticate
+ the user.
+ "
+ ::= { wlsxSwitchUserEntry 8 }
+
+ userConnectedVlan OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Vlan on which the user is connected to the switch.
+ "
+ ::= { wlsxSwitchUserEntry 9 }
+
+ userConnectedSlot OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Slot on switch, where the user connection terminates.
+ "
+ ::= { wlsxSwitchUserEntry 10 }
+
+ userConnectedPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Port on switch, where the user connection terminates.
+ "
+ ::= { wlsxSwitchUserEntry 11 }
+
+ userBWContractName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Name of the Bandwidth Contract applied to this user.
+ "
+ ::= { wlsxSwitchUserEntry 12 }
+
+ userBWContractUsage OBJECT-TYPE
+ SYNTAX INTEGER {
+ user(1),
+ shared(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates how the Bandwidth Contract is used.
+ "
+ ::= { wlsxSwitchUserEntry 13 }
+
+ userConnectedModule OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The module to which the user is connected, if wired.
+ "
+ ::= { wlsxSwitchUserEntry 14 }
+
+
+ -- StationMgmt Table
+ --Station Management Table contains all the station associated with this AP.
+
+ wlsxSwitchStationMgmtTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchStationMgmtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This Table lists all the wireless stations associated with the
+ Access points connected to this switch.
+ "
+
+ ::= { wlsxUserInfoGroup 2 }
+
+ wlsxSwitchStationMgmtEntry OBJECT-TYPE
+ SYNTAX MxSwitchStationMgmtEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Station Management Entry"
+ INDEX {staPhyAddress, staAccessPointBSSID}
+ ::= { wlsxSwitchStationMgmtTable 1 }
+
+ MxSwitchStationMgmtEntry ::=
+ SEQUENCE {
+ staPhyAddress MacAddress,
+ staAccessPointBSSID MacAddress,
+ staUserName DisplayString,
+ staUserRole DisplayString,
+ staAssociationID Unsigned32,
+ staAccessPointESSID DisplayString,
+ staSignalToNoiseRatio Integer32,
+ staTransmitRate INTEGER,
+ staReceiveRate INTEGER
+ }
+
+ staPhyAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ The Physical Address of the Station.
+ "
+ ::= { wlsxSwitchStationMgmtEntry 1 }
+
+ staAccessPointBSSID OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ BSSID of the Access point through which the station is connected
+ to the switch
+ "
+ ::= { wlsxSwitchStationMgmtEntry 2 }
+
+ staUserName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Name of the User connecting from this station.
+ "
+ ::= { wlsxSwitchStationMgmtEntry 3 }
+
+ staUserRole OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ User Role.
+ "
+ ::= { wlsxSwitchStationMgmtEntry 4 }
+
+ staAssociationID OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ AID with which the Station is associated with this system.
+ "
+ ::= { wlsxSwitchStationMgmtEntry 5 }
+
+ staAccessPointESSID OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ ESSID of the Access point
+ "
+ ::= { wlsxSwitchStationMgmtEntry 6 }
+
+ staSignalToNoiseRatio OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ SNR for the BSSID.
+ "
+ ::= { wlsxSwitchStationMgmtEntry 7 }
+
+ staTransmitRate OBJECT-TYPE
+ SYNTAX INTEGER{
+ rate1Mbps(1),
+ rate2Mbps(2),
+ rate5point5Mbps(3),
+ rate6Mbps(4),
+ rate9Mbps(5),
+ rate11Mbps(6),
+ rate12Mbps(7),
+ rate18Mbps(8),
+ rate24Mbps(9),
+ rate36Mbps(10),
+ rate48Mbps(11),
+ rate54Mbps(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates Transmit rate of the channel
+ "
+ ::= { wlsxSwitchStationMgmtEntry 8 }
+
+ staReceiveRate OBJECT-TYPE
+ SYNTAX INTEGER{
+ rate1Mbps(1),
+ rate2Mbps(2),
+ rate5point5Mbps(3),
+ rate6Mbps(4),
+ rate9Mbps(5),
+ rate11Mbps(6),
+ rate12Mbps(7),
+ rate18Mbps(8),
+ rate24Mbps(9),
+ rate36Mbps(10),
+ rate48Mbps(11),
+ rate54Mbps(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates Receive rate of the channel
+ "
+ ::= { wlsxSwitchStationMgmtEntry 9 }
+
+
+ -- StationStats Table
+ --Station Statistics Table contains a summary of statistics collected by the
+ --switch. The stats are indexed by Station Mac and AP BSSID it is associated
+ --to.
+
+ wlsxSwitchStationStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchStationStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This Table lists the statistics of all the wireless stations
+ associated with the Access points connected to this switch.
+ "
+
+ ::= { wlsxUserInfoGroup 3 }
+
+ wlsxSwitchStationStatsEntry OBJECT-TYPE
+ SYNTAX MxSwitchStationStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Station Statistics Entry"
+ INDEX {staPhyAddress, staAccessPointBSSID}
+ ::= { wlsxSwitchStationStatsTable 1 }
+
+ MxSwitchStationStatsEntry ::=
+ SEQUENCE {
+ staTxPackets Counter32,
+ staTxBytes Counter32,
+ staRxPackets Counter32,
+ staRxBytes Counter32,
+ staBwRate Integer32,
+ staFrameRetryRate Integer32,
+ staFrameLowSpeedRate Integer32,
+ staFrameNonUnicastRate Integer32,
+ staFrameFragmentationRate Integer32,
+ staFrameReceiveErrorRate Integer32
+ }
+
+ staTxPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Packets Transmitted by the station.
+ "
+ ::= { wlsxSwitchStationStatsEntry 1 }
+
+ staTxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Bytes Transmitted by the station.
+ "
+ ::= { wlsxSwitchStationStatsEntry 2 }
+
+ staRxPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Packets Received by the Station
+ "
+ ::= { wlsxSwitchStationStatsEntry 3 }
+
+ staRxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Bytes Received by the station.
+ "
+ ::= { wlsxSwitchStationStatsEntry 4 }
+
+ staBwRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Bandwidth Rate in Kbps of the station.
+ "
+ ::= { wlsxSwitchStationStatsEntry 5 }
+
+ staFrameRetryRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Station Frame Retry Rate.
+ "
+ ::= { wlsxSwitchStationStatsEntry 6 }
+
+ staFrameLowSpeedRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Station Frame Low Speed Rate.
+ "
+ ::= { wlsxSwitchStationStatsEntry 7 }
+
+ staFrameNonUnicastRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Station Frame Non Unicast Packet Rate.
+ "
+ ::= { wlsxSwitchStationStatsEntry 8 }
+
+ staFrameFragmentationRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Station Frame Fragmentation Rate.
+ "
+ ::= { wlsxSwitchStationStatsEntry 9 }
+
+ staFrameReceiveErrorRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Station Frame Receive Error Rate.
+ "
+ ::= { wlsxSwitchStationStatsEntry 10 }
+
+-- wlsxAccessPointInfoGroup contains a Local Access Point Information Table.
+-- which lists all the AP's connected to this switch, a Global AP Info Table
+-- which lists all the AP's in the Domain. The Global table is valid only
+-- on the Master switch. The Group also contains two scalar objects which
+-- indicate the total number of AP's and the total number of Clients connected.
+
+
+ wlsxSwitchTotalNumAccessPoints OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Number of Access Points Connected to this switch.
+ "
+ ::= { wlsxAccessPointInfoGroup 1 }
+
+ wlsxSwitchTotalNumStationsAssociated OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Number of Stations Associated to this switch.
+ "
+ ::= { wlsxAccessPointInfoGroup 2 }
+
+-- Local Access Point Table.
+
+ wlsxSwitchAccessPointTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchAccessPointEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This Table lists all the Access Points Connected to this switch.
+ "
+ ::= { wlsxAccessPointInfoGroup 3 }
+
+ wlsxSwitchAccessPointEntry OBJECT-TYPE
+ SYNTAX MxSwitchAccessPointEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Station Management Entry"
+ INDEX {apBSSID}
+ ::= { wlsxSwitchAccessPointTable 1 }
+
+ MxSwitchAccessPointEntry ::=
+ SEQUENCE {
+ apBSSID MacAddress,
+ apESSID DisplayString,
+ apSlot Unsigned32,
+ apPort Unsigned32,
+ apIpAddress IpAddress,
+ apPhyType INTEGER,
+ apType INTEGER,
+ apCurrentChannel INTEGER,
+ apLocation DisplayString,
+ apTotalTime TimeTicks,
+ apInactiveTime TimeTicks,
+ apLoadBalancing TruthValue,
+ apChannelNoise Integer32,
+ apSignalToNoiseRatio Integer32,
+ apTransmitRate INTEGER,
+ apReceiveRate INTEGER
+ }
+
+ apBSSID OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ The Physical Address of the Access Point.
+ "
+ ::= { wlsxSwitchAccessPointEntry 1 }
+
+ apESSID OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ ESSID of the Access Point
+ "
+ ::= { wlsxSwitchAccessPointEntry 2 }
+
+ apSlot OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Slot to which the Access Point is connected.
+ "
+ ::= { wlsxSwitchAccessPointEntry 3 }
+
+ apPort OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Port to which the Access Point is connected.
+ "
+ ::= { wlsxSwitchAccessPointEntry 4 }
+
+ apIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Address of the Access Point.
+ "
+ ::= { wlsxSwitchAccessPointEntry 5 }
+
+ apPhyType OBJECT-TYPE
+ SYNTAX INTEGER{
+ dot11a(1),
+ dot11b(2),
+ dot11g(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Physical Layer Protocol support of the AP.
+ "
+ ::= { wlsxSwitchAccessPointEntry 6 }
+
+ apType OBJECT-TYPE
+ SYNTAX INTEGER{
+ ap(1),
+ am(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates whether the Access point is an Air Monitor or regular AP.
+ "
+ ::= { wlsxSwitchAccessPointEntry 7 }
+
+ apCurrentChannel OBJECT-TYPE
+ SYNTAX INTEGER(1..165)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The Current Operating frequency channel.
+ "
+ ::= { wlsxSwitchAccessPointEntry 8 }
+
+ apLocation OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Location of the AP defined in Building.Floor.... mode.
+ "
+ ::= { wlsxSwitchAccessPointEntry 9 }
+
+ apTotalTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Time since the Ap is connected to the switch
+ "
+ ::= { wlsxSwitchAccessPointEntry 10 }
+
+ apInactiveTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Time since the Ap has been inactive
+ "
+ ::= { wlsxSwitchAccessPointEntry 11 }
+
+ apLoadBalancing OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates whether Load balancing is enabled or not.
+ "
+ ::= { wlsxSwitchAccessPointEntry 12 }
+
+ apChannelNoise OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates the noise on the channel
+ "
+ ::= { wlsxSwitchAccessPointEntry 13 }
+
+ apSignalToNoiseRatio OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ SNR for the BSSID.
+ "
+ ::= { wlsxSwitchAccessPointEntry 14 }
+
+ apTransmitRate OBJECT-TYPE
+ SYNTAX INTEGER{
+ rate1Mbps(1),
+ rate2Mbps(2),
+ rate5point5Mbps(3),
+ rate6Mbps(4),
+ rate9Mbps(5),
+ rate11Mbps(6),
+ rate12Mbps(7),
+ rate18Mbps(8),
+ rate24Mbps(9),
+ rate36Mbps(10),
+ rate48Mbps(11),
+ rate54Mbps(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates Transmit rate of the channel
+ "
+ ::= { wlsxSwitchAccessPointEntry 15 }
+
+ apReceiveRate OBJECT-TYPE
+ SYNTAX INTEGER{
+ rate1Mbps(1),
+ rate2Mbps(2),
+ rate5point5Mbps(3),
+ rate6Mbps(4),
+ rate9Mbps(5),
+ rate11Mbps(6),
+ rate12Mbps(7),
+ rate18Mbps(8),
+ rate24Mbps(9),
+ rate36Mbps(10),
+ rate48Mbps(11),
+ rate54Mbps(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Indicates Receive rate of the channel
+ "
+ ::= { wlsxSwitchAccessPointEntry 16 }
+
+
+ --Global AP Table
+ wlsxSwitchGlobalAPTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchGlobalAPEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "
+ This Table lists all the Access Points Connected in the
+ Switch Domain. This table is valid only on a
+ Master switch. On a Local switch, the table is empty.
+ "
+ ::= { wlsxAccessPointInfoGroup 4 }
+
+ wlsxSwitchGlobalAPEntry OBJECT-TYPE
+ SYNTAX MxSwitchGlobalAPEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Station Management Entry"
+ INDEX {globalAPLocation, globalAPAddress}
+ ::= { wlsxSwitchGlobalAPTable 1 }
+
+ MxSwitchGlobalAPEntry ::=
+ SEQUENCE {
+ globalAPLocation DisplayString,
+ globalAPAddress IpAddress,
+ globalAPLocalSwitch IpAddress,
+ globalAPdot11aPhyAddr MacAddress,
+ globalAPdot11bPhyAddr MacAddress,
+ globalAPState INTEGER,
+ globalAPdot11gPhyAddr MacAddress
+ }
+
+ globalAPLocation OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "
+ Physical Location of the AP, defined in Building.Floor.Location
+ format.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 1 }
+
+ globalAPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "
+ Address of the Access Point.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 2 }
+
+ globalAPLocalSwitch OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "
+ IP Address of the Local Switch this Access Point is connected to.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 3 }
+
+ globalAPdot11aPhyAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "
+ Physical Mac address of the module supporting dot11a in the
+ Access Point. AP can have support for both dot11a and dot11b
+ physical layer.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 4 }
+
+ globalAPdot11bPhyAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "
+ Physical Mac address of the module supporting dot11b in the
+ Access Point. AP can have support for both dot11a and dot11b
+ physical layer.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 5 }
+
+ globalAPState OBJECT-TYPE
+ SYNTAX INTEGER(1..7)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "
+ State of the AP.
+ 1 -- AP is UP.
+ 2 -- AP is DOWN.
+ 3-7 -- Values are deprecated.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 6 }
+
+ globalAPdot11gPhyAddr OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "
+ Physical Mac address of the module supporting dot11g in the
+ Access Point. AP can have support for both a,b,g
+ physical layer.
+ "
+ ::= { wlsxSwitchGlobalAPEntry 7 }
+
+ -- Local AP Stats.
+
+ wlsxSwitchAccessPointStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxSwitchAccessPointStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This Table lists the statistics of all the Access Points Connected
+ to this switch.
+ "
+ ::= { wlsxAccessPointInfoGroup 5 }
+
+ wlsxSwitchAccessPointStatsEntry OBJECT-TYPE
+ SYNTAX MxSwitchAccessPointStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ Ap Stats Entry.
+ "
+ INDEX {apBSSID}
+ ::= { wlsxSwitchAccessPointStatsTable 1 }
+
+ MxSwitchAccessPointStatsEntry ::=
+ SEQUENCE {
+ apStatsChannel INTEGER,
+ apChannelBwRate Integer32,
+ apChannelFrameRetryRate Integer32,
+ apChannelFrameLowSpeedRate Integer32,
+ apChannelFrameNonUnicastRate Integer32,
+ apChannelFrameFragmentationRate Integer32,
+ apChannelFrameReceiveErrorRate Integer32,
+ apBSSTxPackets Counter32,
+ apBSSTxBytes Counter32,
+ apBSSRxPackets Counter32,
+ apBSSRxBytes Counter32,
+ apBSSBwRate Integer32,
+ apBSSFrameRetryRate Integer32,
+ apBSSFrameLowSpeedRate Integer32,
+ apBSSFrameNonUnicastRate Integer32,
+ apBSSFrameFragmentationRate Integer32,
+ apBSSFrameReceiveErrorRate Integer32
+ }
+
+ apStatsChannel OBJECT-TYPE
+ SYNTAX INTEGER(1..165)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Channel on which the ap is operating.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 1 }
+
+
+ apChannelBwRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Bandwidth Rate in Kbps of the apChannel.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 2 }
+
+ apChannelFrameRetryRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Ap Channel Frame Retry Rate.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 3 }
+
+ apChannelFrameLowSpeedRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Ap Channel Frame Low Speed Rate.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 4 }
+
+ apChannelFrameNonUnicastRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Ap Channel Frame Non Unicast Packet Rate.
+ "
+ ::= {wlsxSwitchAccessPointStatsEntry 5 }
+
+ apChannelFrameFragmentationRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Ap Channel Frame Fragmentation Rate.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 6 }
+
+ apChannelFrameReceiveErrorRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Ap Channel Frame Receive Error Rate.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 7 }
+
+ apBSSTxPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Packets Transmitted by the ap on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 8 }
+
+ apBSSTxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Bytes Transmitted by the ap on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 9 }
+
+ apBSSRxPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Packets Received by the ap on this BSSID
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 10 }
+
+ apBSSRxBytes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Total Bytes Received by the ap on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 11 }
+
+ apBSSBwRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Bandwidth Rate in Kbps of the ap on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 12 }
+
+ apBSSFrameRetryRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Frame Retry Rate on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 13 }
+
+ apBSSFrameLowSpeedRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Frame Low Speed Rate on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 14 }
+
+ apBSSFrameNonUnicastRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Frame Non Unicast Packet Rate on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 15 }
+
+ apBSSFrameFragmentationRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Frame Fragmentation Rate on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 16 }
+
+ apBSSFrameReceiveErrorRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Frame Receive Error Rate on this BSSID.
+ "
+ ::= { wlsxSwitchAccessPointStatsEntry 17 }
+
+-- New wlsxInstantAccessPointInfoGroup contains the information related to IAPs.
+-- This table is valid only, when queried from the controller.
+
+ wlsxIapTotalNumBranches OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of branches in IAP"
+ ::= { wlsxInstantAccessPointInfoGroup 1 }
+
+ wlsxIapTotalNumBranchesUp OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of branches with status Up."
+ ::= { wlsxInstantAccessPointInfoGroup 2 }
+
+ wlsxIapTotalNumBranchesDown OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of branches with status Down"
+ ::= { wlsxInstantAccessPointInfoGroup 3 }
+
+-- IAP Table
+
+ wlsxIapBranchTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IapBranchListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "
+ This table lists all the information related to IAP branches.
+ "
+ ::= { wlsxInstantAccessPointInfoGroup 4 }
+ wlsxIapBranchEntry OBJECT-TYPE
+ SYNTAX IapBranchListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IAP branch entry"
+ INDEX {iapBranchKey}
+ ::= { wlsxIapBranchTable 1 }
+
+ IapBranchListEntry ::=
+ SEQUENCE {
+ iapBranchKey DisplayString,
+ iapBranchName DisplayString,
+ iapBranchVcMacAddress MacAddress,
+ iapBranchStatus INTEGER,
+ iapBranchInnerIpAddressType INTEGER,
+ iapBranchInnerIpAddress DisplayString,
+ iapBranchAssignedSubnet DisplayString,
+ iapBranchAssignedVlan OCTET STRING
+ }
+
+ iapBranchKey OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(65))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Key of the IAP branch."
+ ::= { wlsxIapBranchEntry 1 }
+
+ iapBranchName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..129))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Name of the IAP branch."
+ ::= { wlsxIapBranchEntry 2 }
+
+ iapBranchVcMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "MAC address of the Virtual Controller of the branch."
+ ::= { wlsxIapBranchEntry 3 }
+
+ iapBranchStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1),
+ down(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current status of the branch"
+ ::= { wlsxIapBranchEntry 4 }
+
+ iapBranchInnerIpAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv4(1),
+ ipv6(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Inner IP Address type IPv4 or IPv6 of the branch."
+ ::= { wlsxIapBranchEntry 5 }
+
+ iapBranchInnerIpAddress OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..45))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Inner IPv4/IPv6 Address of the branch."
+ ::= { wlsxIapBranchEntry 6 }
+
+ iapBranchAssignedSubnet OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Assigned subnets of the branch."
+ ::= { wlsxIapBranchEntry 7 }
+
+ iapBranchAssignedVlan OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ Assigned vlans of the branch.
+ A string of octets containing one bit per VLAN for a
+ total of 4096 VLANs in the management domain.
+ The most significant bit of the octet string is the
+ lowest value VLAN of 4096 VLANs.
+ By setting the bit(1) we indicate that the vlan is part of the
+ assigned vlans.
+ The most significant bit of the bitmap is transmitted
+ first. Note that if the length of this string is less than
+ 512 octets, any 'missing' octets are assumed to contain
+ the value zero.
+ "
+ ::= { wlsxIapBranchEntry 8 }
+
+-- wlsxSwitchTraps
+-- This group defines all the traps related to the switch platform.
+wlsxSwitchTrapObjectsGroup OBJECT IDENTIFIER ::= { wlsxSwitchTraps 100 }
+
+wlsxAuthServerName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate the
+ Authentication Server, used for Authentication.
+ "
+::= { wlsxSwitchTrapObjectsGroup 1 }
+
+
+wlsxAuthServerTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate the
+ Authentication Server Timeout.
+ "
+::= { wlsxSwitchTrapObjectsGroup 2 }
+
+wlsxFanNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate
+ a failing fan number.
+ "
+::= { wlsxSwitchTrapObjectsGroup 4 }
+
+
+wlsxLineCardNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate a
+ Line Card in the switch.
+ "
+::= { wlsxSwitchTrapObjectsGroup 5 }
+
+
+wlsxVoltageType OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate the
+ type of the voltage.
+ "
+::= { wlsxSwitchTrapObjectsGroup 6 }
+
+
+wlsxVoltageValue OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate the
+ voltage value in Float.
+ "
+::= { wlsxSwitchTrapObjectsGroup 7 }
+
+
+wlsxTemperatureValue OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate
+ Temperature Value.
+ "
+::= { wlsxSwitchTrapObjectsGroup 8 }
+
+
+wlsxProcessName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate a
+ process name.
+ "
+::= { wlsxSwitchTrapObjectsGroup 9 }
+
+wlsxStationMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The Physical Address of the Station.
+ "
+::= { wlsxSwitchTrapObjectsGroup 10 }
+
+wlsxStationBlackListReason OBJECT-TYPE
+ SYNTAX INTEGER {
+ userDefined(1),
+ mitmAttack(2),
+ authFailure(3),
+ pingFlood(4),
+ sessionFlood(5),
+ synFlood(6),
+ sessionBlacklist(7),
+ ipSpoofing(8),
+ other(100)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ The Reason for which a station is black listed.
+ "
+::= { wlsxSwitchTrapObjectsGroup 11 }
+
+wlsxSpoofedIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify a Spoofed IP Address.
+ "
+::= { wlsxSwitchTrapObjectsGroup 12 }
+
+wlsxSpoofedOldPhyAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify a Old Mac Address.
+ "
+::= { wlsxSwitchTrapObjectsGroup 13 }
+
+wlsxSpoofedNewPhyAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify a New Mac Address.
+ "
+::= { wlsxSwitchTrapObjectsGroup 14 }
+
+wlsxDBName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify name of the Database.
+ "
+::= { wlsxSwitchTrapObjectsGroup 15 }
+
+wlsxDBUserName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify name of the Database user.
+ "
+::= { wlsxSwitchTrapObjectsGroup 16 }
+
+wlsxDBIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify the IpAddress of the DB.
+ "
+::= { wlsxSwitchTrapObjectsGroup 17 }
+
+wlsxDBType OBJECT-TYPE
+ SYNTAX INTEGER{
+ mssql(1),
+ mysql(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in a trap to identify the Port of the user.
+ "
+::= { wlsxSwitchTrapObjectsGroup 18 }
+
+wlsxVrID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object contains the Virtual Router Identifier.
+ "
+::= { wlsxSwitchTrapObjectsGroup 19 }
+
+wlsxVrMasterIp OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object contains the Master IP address.
+ "
+::= { wlsxSwitchTrapObjectsGroup 20 }
+
+wlsxVrrpOperState OBJECT-TYPE
+ SYNTAX INTEGER {
+ initialize(1),
+ backup(2),
+ master(3)
+ }
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object represents the VRRP operational state.
+ "
+::= { wlsxSwitchTrapObjectsGroup 21 }
+
+wlsxApTxPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object contains the value of the AP Transmit Power.
+ "
+::= { wlsxSwitchTrapObjectsGroup 22 }
+
+wlsxESIServerGrpName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object represents the External Services Interface
+ (ESI) Server Group name
+ "
+::= { wlsxSwitchTrapObjectsGroup 23 }
+
+
+wlsxESIServerName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object represents the External Services Interface
+ (ESI) Server name
+ "
+::= { wlsxSwitchTrapObjectsGroup 24 }
+
+wlsxESIServerIpaddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object represents the External Services Interface
+ (ESI) Server
+ IP Address
+ "
+::= { wlsxSwitchTrapObjectsGroup 25 }
+
+wlsxLicenseDaysRemaining OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object represents number of the days remaining prior
+ to a license expiry
+ "
+::= { wlsxSwitchTrapObjectsGroup 26 }
+
+wlsxSlotNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "
+ This Object is used in the traps to indicate a
+ Line Card in the switch. This value matches the value
+ of sysExtCardSlot.
+ "
+::= { wlsxSwitchTrapObjectsGroup 27 }
+
+wlsxStationBlackListReasonStr OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..32))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "
+ This object is used in the traps to indicate the
+ type of Blacklist reason.
+ "
+::= { wlsxSwitchTrapObjectsGroup 28 }
+
+-- Trap Definitions.
+
+wlsxSwitchIPChanged NOTIFICATION-TYPE
+ OBJECTS {wlsxSwitchIp}
+ STATUS current
+ DESCRIPTION
+ "A trap which indicates that the switch IP address has changed."
+ ::= { wlsxSwitchTraps 1001 }
+
+wlsxSwitchRoleChange NOTIFICATION-TYPE
+ OBJECTS {wlsxSwitchRole}
+ STATUS current
+ DESCRIPTION
+ "A trap which indicates that the role of the switch has changed in
+ the Domain."
+ ::= { wlsxSwitchTraps 1002 }
+
+-- Authentication Traps.
+wlsxUserEntryCreated NOTIFICATION-TYPE
+ OBJECTS {userPhyAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a New user is created.
+ "
+ ::= { wlsxSwitchTraps 1003 }
+
+wlsxUserEntryDeleted NOTIFICATION-TYPE
+ OBJECTS {userPhyAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a user is deleted.
+ "
+ ::= { wlsxSwitchTraps 1004 }
+
+
+wlsxUserEntryAuthenticated NOTIFICATION-TYPE
+ OBJECTS {userPhyAddress, userName, userAuthenticationMethod, userRole}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a user is Authenticated.
+ "
+ ::= { wlsxSwitchTraps 1005 }
+
+
+wlsxUserEntryDeAuthenticated NOTIFICATION-TYPE
+ OBJECTS {userPhyAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a user is Deauthenticated.
+ "
+ ::= { wlsxSwitchTraps 1006 }
+
+
+wlsxUserAuthenticationFailed NOTIFICATION-TYPE
+ OBJECTS {userPhyAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a user authentication has failed.
+ "
+ ::= { wlsxSwitchTraps 1007 }
+
+
+wlsxAuthServerReqTimedOut NOTIFICATION-TYPE
+ OBJECTS {wlsxAuthServerName}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the authentication server request
+ timed out.
+ "
+ ::= { wlsxSwitchTraps 1008 }
+
+wlsxAuthServerTimedOut NOTIFICATION-TYPE
+ OBJECTS {wlsxAuthServerName, wlsxAuthServerTimeout}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the authentication server
+ timed out.
+ "
+ ::= { wlsxSwitchTraps 1009 }
+
+wlsxAuthServerIsUp NOTIFICATION-TYPE
+ OBJECTS {wlsxAuthServerName}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the authentication server is up.
+ "
+ ::= { wlsxSwitchTraps 1010 }
+
+wlsxAuthMaxUserEntries NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the User Entries table is full and
+ cannot add any more entries.
+ "
+ ::= { wlsxSwitchTraps 1011 }
+
+wlsxAuthMaxAclEntries NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the Acl Entries table is full and
+ cannot add any more entries.
+ "
+ ::= { wlsxSwitchTraps 1012 }
+
+wlsxAuthMaxBWContracts NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the switch reached the maximum number of
+ configurable Bandwidth contracts.
+ "
+ ::= { wlsxSwitchTraps 1013 }
+
+-- Platform Traps.
+
+wlsxPowerSupplyFailure NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the power supply has failed.
+ "
+ ::= { wlsxSwitchTraps 1014 }
+
+wlsxFanFailure NOTIFICATION-TYPE
+ OBJECTS {wlsxFanNumber}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the fan has failed.
+ "
+ ::= { wlsxSwitchTraps 1015 }
+
+wlsxOutOfRangeVoltage NOTIFICATION-TYPE
+ OBJECTS {wlsxVoltageType, wlsxVoltageValue}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the switch received out of range
+ voltage.
+ "
+ ::= { wlsxSwitchTraps 1016 }
+
+wlsxOutOfRangeTemperature NOTIFICATION-TYPE
+ OBJECTS {wlsxTemperatureValue}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the Temperature is out of bounds.
+ "
+ ::= { wlsxSwitchTraps 1017 }
+
+
+wlsxLCInserted NOTIFICATION-TYPE
+ OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a Line card is inserted.
+ "
+ ::= { wlsxSwitchTraps 1018 }
+
+wlsxSCInserted NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a supervisory card is inserted.
+ "
+ ::= { wlsxSwitchTraps 1019 }
+
+wlsxGBICInserted NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a GBIC is inserted in a line card.
+ "
+ ::= { wlsxSwitchTraps 1020 }
+
+wlsxProcessDied NOTIFICATION-TYPE
+ OBJECTS {wlsxProcessName}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a process has died.
+ "
+ ::= { wlsxSwitchTraps 1021 }
+
+wlsxProcessExceedsMemoryLimits NOTIFICATION-TYPE
+ OBJECTS {wlsxProcessName}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a process is consuming large
+ amounts of memory.
+ "
+ ::= { wlsxSwitchTraps 1022 }
+
+wlsxLowOnFlashSpace NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the switch is running low on flash space.
+ "
+ ::= { wlsxSwitchTraps 1023 }
+
+wlsxLowMemory NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the system free memory is low.
+ "
+ ::= { wlsxSwitchTraps 1024 }
+
+wlsxFanTrayRemoved NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the fan tray is removed.
+ "
+ ::= { wlsxSwitchTraps 1025 }
+
+wlsxFanTrayInserted NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the fan tray is removed.
+ "
+ ::= { wlsxSwitchTraps 1026 }
+
+wlsxLCRemoved NOTIFICATION-TYPE
+ OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a Line card is removed.
+ "
+ ::= { wlsxSwitchTraps 1027 }
+
+wlsxSCRemoved NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a supervisory card is removed.
+ "
+ ::= { wlsxSwitchTraps 1028 }
+
+wlsxPowerSupplyMissing NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the power supply is missing.
+ "
+ ::= { wlsxSwitchTraps 1029 }
+
+-- Access point up/down traps.
+
+wlsxAccessPointIsUp NOTIFICATION-TYPE
+ OBJECTS {apLocation, apIpAddress}
+ STATUS deprecated
+ DESCRIPTION
+ "
+ A trap which indicates that an Access point at Location
+ apLocation and Address apIpAddress is up.
+ "
+ ::= { wlsxSwitchTraps 1030 }
+
+wlsxAccessPointIsDown NOTIFICATION-TYPE
+ OBJECTS {apLocation, apIpAddress}
+ STATUS deprecated
+ DESCRIPTION
+ "
+ A trap which indicates that an Access point at Location
+ apLocation and Address apIpAddress is down.
+ "
+ ::= { wlsxSwitchTraps 1031}
+
+
+wlsxCoverageHoleDetected NOTIFICATION-TYPE
+ OBJECTS {apLocation, apIpAddress, wlsxStationMacAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that an Access point at Location
+ apLocation and Address apIpAddress has detected a Coverage Hole.
+ "
+ ::= { wlsxSwitchTraps 1032}
+
+
+wlsxChannelChanged NOTIFICATION-TYPE
+ OBJECTS {apLocation, apIpAddress, apCurrentChannel}
+ STATUS deprecated
+ DESCRIPTION
+ "
+ A trap which indicates that an Access point at Location
+ apLocation and Address apIpAddress has changed the channel to
+ apCurrentChannel.
+ "
+ ::= { wlsxSwitchTraps 1033}
+
+wlsxStationAddedToBlackList NOTIFICATION-TYPE
+ OBJECTS {wlsxStationMacAddress, wlsxStationBlackListReason, wlsxStationBlackListReasonStr}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a station with address
+ wlsxStationMacAddress is black listed for
+ wlsxStationBlackListReason reason.
+ "
+ ::= { wlsxSwitchTraps 1034}
+
+wlsxStationRemovedFromBlackList NOTIFICATION-TYPE
+ OBJECTS {wlsxStationMacAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a station with address
+ wlsxStationMacAddress is removed from black list.
+ "
+ ::= { wlsxSwitchTraps 1035}
+
+wlsxIpSpoofingDetected NOTIFICATION-TYPE
+ OBJECTS {wlsxSpoofedIpAddress, wlsxSpoofedOldPhyAddress, wlsxSpoofedNewPhyAddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap indicating that the switch detected IP Spoofing.
+ "
+ ::= { wlsxSwitchTraps 1036}
+
+wlsxDBCommunicationFailure NOTIFICATION-TYPE
+ OBJECTS {wlsxDBName, wlsxDBUserName, wlsxDBIpAddress, wlsxDBType}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap to indicate that communication with Database failed.
+ "
+ ::= { wlsxSwitchTraps 1037}
+
+wlsxVrrpStateChange NOTIFICATION-TYPE
+ OBJECTS {wlsxVrID, wlsxVrMasterIp, wlsxVrrpOperState}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that VRRP State has changed on the switch.
+ "
+ ::= { wlsxSwitchTraps 1038}
+
+wlsxAPRadioAttributesChanged NOTIFICATION-TYPE
+ OBJECTS {apLocation, apIpAddress, apCurrentChannel, wlsxApTxPower}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates changes in the Radio attributes of an
+ Access Point at location apLocation and address apIpAddress.
+ Ap channel is apCurrentChannel, and Transmit power is
+ apTxPower.
+ "
+ ::= { wlsxSwitchTraps 1039}
+
+wlsxESIServerUp NOTIFICATION-TYPE
+ OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a ESI server <wlsxESIServerName> in
+ group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up
+ "
+ ::= { wlsxSwitchTraps 1040}
+
+wlsxESIServerDown NOTIFICATION-TYPE
+ OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that a ESI server <wlsxESIServerName> in
+ group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down
+ "
+ ::= { wlsxSwitchTraps 1041}
+
+wlsxLicenseExpiry NOTIFICATION-TYPE
+ OBJECTS {wlsxLicenseDaysRemaining}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that one or more licenses on the
+ switch will expire in <wlsxLicenseDaysRemaining> days
+ "
+ ::= { wlsxSwitchTraps 1042}
+
+wlsxAceUsageThreshold NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the Acl Entries table has reached
+ eighty percent of the maximum limit.
+ "
+ ::= { wlsxSwitchTraps 1043 }
+
+wlsxFanAbsent NOTIFICATION-TYPE
+ OBJECTS {wlsxFanNumber}
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the fan is absent.
+ "
+ ::= { wlsxSwitchTraps 1044 }
+
+wlsxWebCCLicenseEnforcement NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the WebCC license enforcement has
+ been triggered.
+ "
+ ::= { wlsxSwitchTraps 1045 }
+
+wlsxLowOnFlash1Space NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "
+ A trap which indicates that the switch is running low on flash1 space.
+ "
+ ::= { wlsxSwitchTraps 1046 }
+
+wlsxSwitchIPv6Changed NOTIFICATION-TYPE
+ OBJECTS {wlsxSwitchIpv6}
+ STATUS current
+ DESCRIPTION
+ "A trap which indicates that the switch IPv6 address has changed."
+ ::= { wlsxSwitchTraps 1047 }
+
+wlsxDot1xThresholdLimitHit NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A Trap which indicates that the controller is running on high optimum limit."
+ ::= { wlsxSwitchTraps 1048 }
+
+wlsxDot1xTotalLimitHit NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ " A Trap which indicates that the controller is running on full optimum limit."
+ ::= { wlsxSwitchTraps 1049 }
+
+
+END
+
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 11:45:35 +0000