path: root/MIBS/ubiquoss/UBQS-INTERFACE-MIB

-- *****************************************************************
-- UBQS-INTERFACE-MIB
--   
-- May 2009,  Park Hyung Eun
--
-- Copyright (c) 2009 by Ubiquoss, Corp.
--   
-- All rights reserved.
-- ***************************************************************

UBQS-INTERFACE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    Unsigned32,
    Integer32,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF     
    RowStatus,
    TruthValue,                                             
    TimeStamp,
    DisplayString,
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    ifIndex,
    InterfaceIndexOrZero,
    ifName,
    ifType,
    ifAdminStatus,
    ifOperStatus
        FROM IF-MIB
    entPhysicalIndex
        FROM ENTITY-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB       
    VlanIndex,
    	FROM Q-BRIDGE-MIB    
    UbiPortList,    
    UbiBridgeId,
    Unsigned64,
    IfOperStatusReason
        FROM UBQS-TC     
    ubiMgmtv2
        FROM UBQS-SMI;


ubiInterfaceMIB MODULE-IDENTITY
        LAST-UPDATED    "200905260000Z"
        ORGANIZATION 	"Ubiquoss Corp."
	    CONTACT-INFO
		"	Ubiquoss
			Customer Service

		 Postal: 24F Milennium B/D,
		 	467-12, Dogok-Dong,
			GangNam-Gu, Seoul 135-270
			Korea

		   Tel: 82-2-2190-3100"   
    DESCRIPTION
        "A MIB module for the physical interface 
        in IF-MIB (RFC2863)."
     ::= { ubiMgmtv2 4 }



-- ***********************************************************
-- Textual Conventions
-- ***********************************************************          
 
PortType  			::= TEXTUAL-CONVENTION
        STATUS  current
        DESCRIPTION
                "Represents the port type."
        SYNTAX  INTEGER { 
                            other(1),      						-- none of the following (no transceiver, bad eeprom and so on)     
                                                
                        -- 10/100 Ethernet      
                            e100BaseUnknown(10),				-- Unknown Fiber Fast Ethernet
                            e10BaseT(11),   					-- UTP Ethernet
                            e10BaseF(12),   					-- Multi Mode fiber Ethernet     
                            e100BaseTX(13),						-- UTP Fast Ethernet (Cat 5)
                            e100BaseT4(14),						-- UTP Fast Ethernet (Cat 3)      
                            e100BaseF(15), 						-- Multi Mode fiber Fast Ethernet     
                            e100BaseLX(16),  					-- Long Wave fiber Fast Ethernet                            
                            e100BaseFsm(17), 					-- Single Mode fiber Fast Ethernet
                            e10a100BaseTX(18), 					-- 10/100 UTP Ethernet(Cat 3/5)
 	       					e100BaseBX10(19),
                       		e100BaseBX10D(20),					-- Fiber Fast Ethernet bi-directional 
                       											-- 10km Downlink over SMF
                       		e100BaseBX10U(21),					-- Fiber Fast Ethernet bi-directional 
                       											-- 10km Uplink over SMF                 
                            e100BaseSX(22),						-- Short Wave Fiber Fast Ethernet
 
                                                                                                                               
                         -- Gigabit Ethernet            
                            e1000BaseUnknown(100),				-- Unknown Giga Ethernet                          
                            e1000BaseLX(101), 					-- Long Wave fiber Giga Ethernet
                            e1000BaseSX(102), 					-- Short Wave fiber Giga Ethernet
                            e1000BaseCX(103), 					-- Copper Gigabit Ethernet
                            e1000BaseLH(104), 					-- Long Haul fiber Giga Ethernet
                            e1000BaseT(105),  					-- Twisted Pair Giga Ethernet       
                            e10a100a1000BaseT(106), 			-- 10/100/1000 BaseT
                            e1000BaseZX(107), 					-- Extended Reach Giga Ethernet   
                              
                            e1000BaseBX(108),					-- ubiquoss   
                            e1000BaseBX10D(109),				-- Giga Ethernet bi-directional 10km
                                 								-- Downlink over SMF
                            e1000BaseBX10U(110),				-- Giga Ethernet bi-directional 10km
                                 								-- Uplink over SMF     			
                            e1000BasePX(111),					-- ubiquoss   
                            e1000BaseBT(112), 					-- BT Giga Ethernet
                            e1000BaseSvc(113), 					-- Service Module Giga Ethernet
                            e1000BasePXPon(114),    			-- Unknown Pon         
						    e1000BasePX20(115),     			-- Pon 20km
							e1000BasePX30(116),     			-- Pon 30km
   								
                  
                         -- 10 Gigabit Ethernet                             
                            e10GBaseUnknown(1000),    			-- Unknown 10G
                            e10GBaseCPX(1001), 					--10GE Parallel 860nm Laser
                            e10GBaseLX4(1002), 					-- 10GE Wide-WDM 1310nm Laser
                            e10GBaseEX4(1003), 					-- 10GE Wide-WDM 1550 Laser
                            e10GBaseLR(1004),  					-- 10GE Serial 1310nm Laser
                            e10GBaseSX4(1005), 					-- 10GE Wide-WDM 850nm Laser
                            e10GBaseER(1006),  					-- 10GE Serial 1550nm Laser     
                            e10GBaseSR(1007),  					-- 10GE Serial 850nm Laser
                            e10GBaseCX4(1008), 					-- 10GE XAUI Copper
                            e10GBaseSW(1009),  					-- 10GE Laser
                            e10GBaseLW(1010),  					-- 10GE Laser
                            e10GBaseEW(1011),  					-- 10GE Laser
                            e10GBaseSvc(1012),  				-- Service Module 10G Ethernet  
                            e10GBaseZR(1013),     				-- 10GE Laser
                            e100BaseEX(1014),					-- Fiber Fast Ethernet
                            e100BaseZX(1015),					-- Extended Reach Fiber Fast Ethernet
                            e10GBaseLRM(1016),					-- 10GE Laser 300m over 50um Multi Mode Fiber
                            e10GBaseT(1017),					-- 10GE Laser twisted pair
                            e10GBaseSfpPlus(1018),				-- 10GE SFP PLUS
                            e10GBaseEPON(1019),					-- 10GE EPON
                            
                         -- 40 Gigabit Ethernet
                            e40GBaseUnknown(2000),    			-- Unknown 40G
                            e40GBaseCR4(2001), 					-- 40GE Twin-ax copper cable
                            e40GBaseSR4(2002), 					-- 40GE Serial 850nm Laser
                            e40GBaseLR4(2003), 					-- 40GE Serial 1300nm Laser
                            e40GXLPPI(2004)  					-- 40GE Active Cable
                       }
                            
PortGBICTypeList     	::= TEXTUAL-CONVENTION
        STATUS  current
        DESCRIPTION
                "Represents the type of slot."
        SYNTAX  INTEGER {
                        none(0),       		-- unequipped
                        other(1),           -- equipped, none of the following list
                        sfp(2),   
                       	xfp(3),
                       	sfp-plus(4),
                       	qsfp-plus(5)
         }		

UbiSwitchportType      	::= TEXTUAL-CONVENTION
	    	STATUS  current
	    	DESCRIPTION
        "A port type.  The possible port types are:
             customerVlanPort(0) - Indicates a port is a C-tag
                 aware port of an enterprise VLAN aware bridge.

             providerNetworkPort(1) - Indicates a port is an S-tag
                 aware port of a Provider Bridge or Backbone Edge
                 Bridge used for connections within a PBN or PBBN.

             customerNetworkPort(2) - Indicates a port is an S-tag
                 aware port of a Provider Bridge or Backbone Edge
                 Bridge used for connections to the exterior of a
                 PBN or PBBN.

             customerEdgePort(3) - Indicates a port is a C-tag
                 aware port of a Provider Bridge used for connections
                 to the exterior of a PBN or PBBN.

             customerBackbonePort(4) - Indicates a port is a I-tag
                 aware port of a Backbone Edge Bridge's B-component.

             virtualInstancePort(5) - Indicates a port is a virtual
                 S-tag aware port within a Backbone Edge Bridge's
                 I-component which is responsible for handling
                 S-tagged traffic for a specific backbone service
                 instance.

             dBridgePort(6) - Indicates a port is a VLAN-unaware
                 member of an 802.1D bridge.             
             access(7)
             trunk(8)
             hybrid(9)  "

          SYNTAX  BITS {   
                     customerVlanPort(0),
                     providerNetworkPort(1),
                     customerNetworkPort(2),
                     customerEdgePort(3),
                     customerBackbonePort(4),
                     virtualInstancePort(5),
                     dBridgePort(6),
                     access(7),
                     trunk(8),
                     hybrid(9)          
          }

UbiFlowctrlWatermark      	::= TEXTUAL-CONVENTION
	    	STATUS  current
	    	DESCRIPTION
			"represent flowcontrol watermark value :
			
				'3d 3d'                  
				
				--------------------------
				first value		= wmpause(0-255)
				second value	= wmcancel(0-255)"
			SYNTAX	OCTET STRING (SIZE(7))
				 
-- ***************************************************************
--   ubiInterfaceMIB
-- ***************************************************************
ubiInterfaceMIBNotificationPrefix  	OBJECT IDENTIFIER		::= { ubiInterfaceMIB 0 } 
ubiInterfaceMIBObjects  			OBJECT IDENTIFIER		::= { ubiInterfaceMIB 1 }     
ubiInterfaceMIBConformance  		OBJECT IDENTIFIER		::= { ubiInterfaceMIB 2 }
   


ubiIfNotificationEnables  			OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 1 }      
ubiPortExt							OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 3 }
ubiSwitchPort  						OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 4 }   
ubiPortTrafficControl 				OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 5 }   
ubiIfStatistics	 					OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 6 }  
ubiPortControl						OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 7 }  
ubiIfErps							OBJECT IDENTIFIER		::= { ubiInterfaceMIBObjects 8 }  


-- subtable of ubiIfNotificationEnables 
ubiGrp1	 							OBJECT IDENTIFIER		::= { ubiIfNotificationEnables 1 }  
ubiGrp2		 						OBJECT IDENTIFIER		::= { ubiIfNotificationEnables 2 } 
      
                                                                                              
-- ***********************************************************
-- ubiInterfaceMIBNotificationPrefix
-- ***********************************************************       
ubiInterfaceNotifications  			OBJECT IDENTIFIER		::= { ubiInterfaceMIBNotificationPrefix 0 }  
ubiTrafficControlNotifications  	OBJECT IDENTIFIER		::= { ubiInterfaceMIBNotificationPrefix 1 }  
  
         
	ubiPortAutoNegoFault NOTIFICATION-TYPE
    	OBJECTS         { 
    					  ubiPortName,       
    					  ubiPortAutoNegoFaultState    			        
    	}
    	STATUS          current
    	DESCRIPTION
        	"A ubiPortAutoNegoFault notification is sent 
        	at auto negotiation failure for a particular physical 
        	port."
   	::= { ubiInterfaceNotifications 1 }
                                 
	ubiLoadMonitorRisingAlarm NOTIFICATION-TYPE
    	OBJECTS         { 
    					  ubiPortName,       
    					  ubiLoadMonitorType,
    					  ubiLoadMonitorVariable, 
    			          ubiLoadMonitorValue,     
    			          ubiLoadMonitorAlarmType,
    			          ubiLoadMonitorCriticalThreshold,     
    			          ubiLoadMonitorMajorThreshold,
    			          ubiLoadMonitorUnit,
    			          ubiLoadMonitorAlarmZone 
    			        }
    	STATUS          current
    	DESCRIPTION
        	"A ubiLoadMonitorRisingAlarm notification is sent 
        	when the ubiLoadMonitorValue crosses its rising threshold."
   	::= { ubiTrafficControlNotifications 1 }
                                         
	ubiLoadMonitorFallingAlarm NOTIFICATION-TYPE
    	OBJECTS         { 
    					  ubiPortName,       
    					  ubiLoadMonitorType,
    					  ubiLoadMonitorVariable, 
    			          ubiLoadMonitorValue,
    			          ubiLoadMonitorAlarmType,  
    			          ubiLoadMonitorCriticalThreshold,
    			          ubiLoadMonitorMajorThreshold,
    			          ubiLoadMonitorUnit,
    			          ubiLoadMonitorAlarmZone
    					}
    	STATUS          current
    	DESCRIPTION
        	"A ubiLoadMonitorRisingAlarm notification is sent 
        	when the ubiLoadMonitorValue crosses its falling threshold."
   	::= { ubiTrafficControlNotifications 2 }
                                         
   	ubiTrafficControlRisingAlarm	NOTIFICATION-TYPE
   		OBJECTS
   		{
   			ubiPortName,
   			ubiTrafficControlBaseType,
   			ubiTrafficControlType,
   			ubiTrafficControlDirection,
   			ubiTrafficControlStatus,
			ubiTrafficControlHighThreshold,
			ubiTrafficControlLowThreshold,
			ubiTrafficControlAverageRate,
			ubiTrafficControlOneMinRate,
			ubiTrafficControlAlarmCount
		}


		STATUS		current
		DESCRIPTION
			"A ubiTrafficControlRisingAlarm is sent
			 when ubiTrafficControlOneMinRate is greater than current threshold."
		::= { ubiTrafficControlNotifications 3 }

	ubiTrafficControlFallingAlarm	NOTIFICATION-TYPE
   		OBJECTS
   		{
   			ubiPortName,
   			ubiTrafficControlBaseType,
   			ubiTrafficControlType,
   			ubiTrafficControlDirection,
   			ubiTrafficControlStatus,
			ubiTrafficControlHighThreshold,
			ubiTrafficControlLowThreshold,
			ubiTrafficControlAverageRate,
			ubiTrafficControlOneMinRate,
			ubiTrafficControlAlarmCount
		}
		STATUS		current
		DESCRIPTION
			"A ubiTrafficControlFallingAlarm is sent
			 when ubiTrafficControlOneMinRate is less than current threshold."
		::= { ubiTrafficControlNotifications 4 }


-- ***********************************************************
-- ubiIfNotificationEnables
-- ***********************************************************

  ubiLinkUpDownEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
               "This variable  indicates  whether  the  system
                produces the notification of linkup/down."
        DEFVAL { false }
    ::= { ubiGrp1 1 }


  ubiPortAutoNegoFaultEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
               "This variable  indicates  whether  the  system
                produces the notification of the auto negotiation 
                failure for a particular physical port."
        DEFVAL { false }
    ::= { ubiGrp2 1 }  

   ubiLoadMonitorAlarmEnabled OBJECT-TYPE
        SYNTAX      BITS
        {   
			 input(0), 
			 crc(1), 
			 error(2),
			 drop(3),
			 output(4)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
               "This variable  indicates  whether  the  system
                produces the notification of ubiLoadMonitorRisingAlarm 
                and ubiLoadMonitorFallingAlarm."
    ::= { ubiGrp2 2 }  
    
  ubiTrafficControlAlarmEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
               "This variable  indicates  whether  the  system
                produces the notification of ubiTrafficControlRisingAlarm 
                and ubiTrafficControlFallingAlarm."
        DEFVAL { false }
    ::= { ubiGrp2 3 }

  
-- ***********************************************************
-- ubiIfPortTable
-- ***********************************************************
  
	ubiPortTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiPortEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains objects which provide
        	more information about physical interface."
    	::= { ubiInterfaceMIBObjects 2 }

	ubiPortEntry OBJECT-TYPE
    	SYNTAX          UbiPortEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing management information 
        	applicable to a particular physical interface."
    	INDEX           { ifIndex } 
    	::= { ubiPortTable 1 }

	UbiPortEntry ::= SEQUENCE {       
			ubiPortName							DisplayString,    
			ubiPortType                         PortType,
			ubiPortOperStatus					INTEGER,      
		--	ubiPortGBICStatus           		INTEGER,
		--	ubiPortGBICType						PortGBICTypeList,
			ubiPortDuplex						INTEGER,   
			ubiPortSpeed						INTEGER,     
			ubiPortAdminDuplex					INTEGER,
			ubiPortAdminSpeed					INTEGER,    
	       	ubiPortMtu                        	Integer32,    
	       	ubiPortL2L3IfState					INTEGER,
	       	ubiPortAutoNegoFaultState			INTEGER,
	       	ubiPortReset						INTEGER,
	       	ubiPortGBICSerialNumber				DisplayString,
	       	ubiPortLocalSwitching				INTEGER
	}
  
 	ubiPortName OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"The physical port name."
	   	::= { ubiPortEntry 1 }   
  
  	ubiPortType OBJECT-TYPE
    	SYNTAX          PortType
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"The type of the physical port." 
    	::= { ubiPortEntry 2 }    
  
   	ubiPortOperStatus OBJECT-TYPE
        SYNTAX	INTEGER {  
				down(1),
				up(2),          -- status ok
				disable(3)		-- disable		
		}
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"The current operational status of the port.
        	    down(1) is down
        	    up(2) is up 
        	    disable(3) is administratively down"
       	::= { ubiPortEntry 3 }
                                    
  --	ubiPortGBICStatus OBJECT-TYPE
  --  	SYNTAX          INTEGER
  --  	{       
  -- 			none(0),     
  -- 			in(1),
  -- 			out(2)
  --  	}
  --  	MAX-ACCESS      read-only
  --  	STATUS          current
  --  	DESCRIPTION
  --      	"The current operational status of the equipped slot." 
  --  	::= { ubiPortEntry 4 }    
    
  
  --	ubiPortGBICType OBJECT-TYPE      
  --  	SYNTAX          PortGBICTypeList
  --  	MAX-ACCESS      read-only
  --  	STATUS          current
  --  	DESCRIPTION
  --      	"The current GBIC Type of the equipped slot." 
 --   	::= { ubiPortEntry 5 }
 
 
  	ubiPortDuplex OBJECT-TYPE
    	SYNTAX          INTEGER
    	{   
   			half(1),     
   			full(2),
   			auto(3)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Indicates whether the port is operating in half-
 			 duplex, full-duplex or auto negotiation mode." 
    	::= { ubiPortEntry 4 }

 
  	ubiPortSpeed OBJECT-TYPE
    	SYNTAX          INTEGER
    	{
			auto(0),  
			speed_10(10),    
			speed_100(100),  
			speed_1000(1000),   
			speed_2500(2500),
			speed_10000(10000),
			speed_40000(40000)
    	}                   
    	UNITS			"Mbps"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION                                                                        
        	"The current operational speed of the port." 
    	::= { ubiPortEntry 5 }  

 
  	ubiPortAdminDuplex OBJECT-TYPE
    	SYNTAX          INTEGER
    	{   
   			half(1),     
   			full(2),
   			auto(3)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current 
       	DESCRIPTION
        	"The desired duplex of the port." 
    	::= { ubiPortEntry 6 }

  	ubiPortAdminSpeed OBJECT-TYPE
    	SYNTAX          INTEGER
    	{
			auto(0),  
			speed_10(10),    
			speed_100(100),  
			speed_1000(1000),
			speed_2500(2500),
			speed_10000(10000),
			speed_40000(40000)
    	}     
    	UNITS			"Mbps"
    	MAX-ACCESS      read-write
    	STATUS          current  
    	DESCRIPTION
        	"The desired speed of the port." 
    	::= { ubiPortEntry 7 }  

  	ubiPortMtu OBJECT-TYPE
    	SYNTAX          Integer32 (1500..10218 )
    	MAX-ACCESS      read-write
    	STATUS          current    
    	DESCRIPTION
        	"The MTU value of the port."
    	DEFVAL          { 1500 } 
    	::= { ubiPortEntry 8 } 
                                     
  	ubiPortL2L3IfState OBJECT-TYPE
    	SYNTAX          INTEGER {      
 				routed(1), 
 				switchport(2)    	
 		}
    	MAX-ACCESS      read-write
    	STATUS          current    
    	DESCRIPTION
        	"The operational mode of the port whether the port 
        	is layer 2 or layer 3."
    	::= { ubiPortEntry 9 } 
                                                                                  
   
   	ubiPortAutoNegoFaultState    OBJECT-TYPE
   		SYNTAX			INTEGER {   
   			ok(1),
   			fail(2)
   		}   
   		MAX-ACCESS		accessible-for-notify
		STATUS			current
		DESCRIPTION
			"The link is down due to auto negotiation failure.
			 This state indicates the state of auto negotiation 
			 failure for a particular port. But it's used for 
			 notification only."
   	    ::= { ubiPortEntry 10 } 		
   	    
   	ubiPortReset    OBJECT-TYPE
   		SYNTAX			INTEGER {      
   			none(0),
   			reset(1)
  		}   
   		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION
			"Reset the physical port."
   	    ::= { ubiPortEntry 11 }    
   	    
   	ubiPortLocalSwitching		OBJECT-TYPE
   		SYNTAX		INTEGER
   		{
   			disable(0),
   			enable(1)
   		}            
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"Port local-switching"
   		::= { ubiPortEntry 12 }
 

  
-- ***********************************************************
-- ubiPortExtTable
-- ***********************************************************
  
	ubiPortExtTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiPortExtEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains objects which provide
        	more information about physical interface."
    	::= { ubiPortExt 1 }

	ubiPortExtEntry OBJECT-TYPE
    	SYNTAX          UbiPortExtEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing management information 
        	applicable to a particular physical interface."
    	INDEX           { ifIndex } 
    	::= { ubiPortExtTable 1 }

	UbiPortExtEntry ::= SEQUENCE {       
			ubiPortGBICStatus           		INTEGER,
			ubiPortGBICType						PortGBICTypeList,
	       	ubiPortGBICSerialNumber				DisplayString
	}

  	ubiPortGBICStatus OBJECT-TYPE
    	SYNTAX          INTEGER
    	{       
   			none(0),     
   			in(1),
   			out(2)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The current operational status of the equipped slot." 
    	::= { ubiPortExtEntry 1 }    
    
  
  	ubiPortGBICType OBJECT-TYPE      
    	SYNTAX          PortGBICTypeList
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The current GBIC Type of the equipped slot.
                none(0): unequipped
                other(1) : equipped, none of the following list
                sfp(2)  
                xfp(3)
                sfp-plus(4) " 
    	::= { ubiPortExtEntry 2 }
                                          
                                          
   	ubiPortGBICSerialNumber    OBJECT-TYPE
   		SYNTAX			DisplayString
   		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION
			"The serial number of this GBIC."
   	    ::= { ubiPortExtEntry 3 }   
 

 
-- ***********************************************************
-- ubiSwitchPortTable
-- ***********************************************************

  	ubiSwitchportTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiSwitchportEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"A table contains the information for switchport."
		::=  {  ubiSwitchPort 1 }
                                   
  	ubiSwitchportEntry OBJECT-TYPE
		SYNTAX     UbiSwitchportEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION                                 
			"A list of information for each switchport."
		INDEX   { ifIndex }
		::= { ubiSwitchportTable 1 }
 
 
	UbiSwitchportEntry ::= SEQUENCE
    {
		ubiSwitchportName					DisplayString,   
		ubiSwitchportMode					UbiSwitchportType,
		ubiSwitchportBridgeId				UbiBridgeId,
		ubiSwitchportVlanNative				VlanIndex,
		ubiSwitchportVlanDefault			VlanIndex   		  
	}     
    
	ubiSwitchportName OBJECT-TYPE
		SYNTAX     DisplayString
		MAX-ACCESS read-only
		STATUS     current
		DESCRIPTION
			"A textual string containing information about 
			the interface."
		::= { ubiSwitchportEntry 1 }

	ubiSwitchportMode OBJECT-TYPE
		SYNTAX     	UbiSwitchportType
		MAX-ACCESS  read-write
		STATUS     	current
		DESCRIPTION
 			"A port type.  The possible port types are:
             customerVlanPort(0) - Indicates a port is a C-tag
                 aware port of an enterprise VLAN aware bridge.

             providerNetworkPort(1) - Indicates a port is an S-tag
                 aware port of a Provider Bridge or Backbone Edge
                 Bridge used for connections within a PBN or PBBN.

             customerNetworkPort(2) - Indicates a port is an S-tag
                 aware port of a Provider Bridge or Backbone Edge
                 Bridge used for connections to the exterior of a
                 PBN or PBBN.

             customerEdgePort(3) - Indicates a port is a C-tag
                 aware port of a Provider Bridge used for connections
                 to the exterior of a PBN or PBBN.

             customerBackbonePort(4) - Indicates a port is a I-tag
                 aware port of a Backbone Edge Bridge's B-component.

             virtualInstancePort(5) - Indicates a port is a virtual
                 S-tag aware port within a Backbone Edge Bridge's
                 I-component which is responsible for handling
                 S-tagged traffic for a specific backbone service
                 instance.

             dBridgePort(6) - Indicates a port is a VLAN-unaware
                 member of an 802.1D bridge.             
             access(7)
             trunk(8)
             hybrid(9)         		
             "                   
		::= { ubiSwitchportEntry 2 } 
 
	ubiSwitchportBridgeId OBJECT-TYPE
		SYNTAX     UbiBridgeId
		MAX-ACCESS read-write
		STATUS     current
		DESCRIPTION
			"This object is used to allocate the bridge 
			 group id."
		::= { ubiSwitchportEntry 3 }

	ubiSwitchportVlanNative OBJECT-TYPE
		SYNTAX      VlanIndex    		
		MAX-ACCESS  read-write
		STATUS     	current
		DESCRIPTION
 			"The native vlan of a switchport."
		::= { ubiSwitchportEntry 4 } 

	ubiSwitchportVlanDefault OBJECT-TYPE
		SYNTAX     	VlanIndex 
		MAX-ACCESS  read-write
		STATUS     	current
		DESCRIPTION
 			"The default vlan of a switchport."
		::= { ubiSwitchportEntry 5 } 

 
-- ***********************************************************
-- ubiSwitchPortVlanControlTable
-- ***********************************************************

  	ubiSwitchPortVlanControlTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiSwitchPortVlanControlEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"This table contains the control information 
			of vlan for switchport."
		::=  {  ubiSwitchPort 2 }
                                   
  	ubiSwitchPortVlanControlEntry OBJECT-TYPE
		SYNTAX     UbiSwitchPortVlanControlEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION                                 
			"A list of vlan control for each switchport."
		INDEX   { ifIndex, ubiVlanIndex }
		::= { ubiSwitchPortVlanControlTable 1 }
 
 
	UbiSwitchPortVlanControlEntry ::= SEQUENCE
    {   
		ubiSwitchportVlanTaggedSet			INTEGER,   
		ubiSwitchportVlanUntaggedSet		INTEGER,
		ubiSwitchportVlanEgressTaggedSet	INTEGER 
    }     
    
	ubiSwitchportVlanTaggedSet OBJECT-TYPE
		SYNTAX     INTEGER {    
			other(0), -- none of the following     
			add(1),
			delete(2),
			except(3),
			all(4),
			none(5)
		}
		MAX-ACCESS read-write
		STATUS     current
		DESCRIPTION
			"The operational set of the switchport for a specific 
			 tagged vlan.
			
			 If a value of set is all(4), the vlan index 
			 should be a zero. 			
			"
		::= { ubiSwitchPortVlanControlEntry 1 }

	ubiSwitchportVlanUntaggedSet OBJECT-TYPE
		SYNTAX     	INTEGER {         
			other(0), -- none of the following       
			add(1),
			delete(2)
		}
		MAX-ACCESS  read-write
		STATUS     	current
		DESCRIPTION
 			"The operational set of the switchport for a specific 
 			 untagged vlan. 

			 If a value of set is all(4), the vlan index 
			 should be a zero. 
			"
		::= { ubiSwitchPortVlanControlEntry 2 } 
 
	ubiSwitchportVlanEgressTaggedSet OBJECT-TYPE
		SYNTAX     INTEGER {          
			enable(1),
			disable(2)
		}
		MAX-ACCESS read-write
		STATUS     current
		DESCRIPTION
			"The operational set of the switchport for a egress 
			 tagged vlan."
		::= { ubiSwitchPortVlanControlEntry 3 }

-- ***********************************************************
-- ubiSwitchVlanStackingTable
-- ***********************************************************  

 	ubiSwitchVlanStackingTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiSwitchVlanStackingEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"This table contains the stacking information 
			of vlan for switchport."
		::=  {  ubiSwitchPort 3 }
                                   
  	ubiSwitchVlanStackingEntry OBJECT-TYPE
		SYNTAX     UbiSwitchVlanStackingEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION                                 
			"A list of vlan stacking for each switchport."
		INDEX   { ifIndex }
		::= { ubiSwitchVlanStackingTable 1 }
 
 
	UbiSwitchVlanStackingEntry ::= SEQUENCE
    {   
		ubiVlanStackingMode				INTEGER,   
		ubiVlanStackingEthertype		DisplayString,
    }     
    
    ubiVlanStackingMode			OBJECT-TYPE	
    	SYNTAX			INTEGER
    	{
    		disable(0),
    		customerEdgePort (1),
    		providerPort (2)
    	}                   
    	MAX-ACCESS		read-write
    	STATUS			current
    	DESCRIPTION
    		"vlan-stacking mode"
    	::= { ubiSwitchVlanStackingEntry 1 }
    	
    ubiVlanStackingEthertype	OBJECT-TYPE	
    	SYNTAX			DisplayString 
       	MAX-ACCESS		read-write
    	STATUS			current
    	DESCRIPTION                             
    		"vlan-stacking ethertype (format : 0xhhhh)"
    	::= { ubiSwitchVlanStackingEntry 2 }
    	
-- ***********************************************************
-- ubiLoadMonitorTable
-- ***********************************************************

  	ubiLoadMonitorTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiLoadMonitorEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"This table contains the information of load monitoring."
		::=  {  ubiPortTrafficControl 1 }
                                                
                                                
  	ubiLoadMonitorEntry OBJECT-TYPE
		SYNTAX     UbiLoadMonitorEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION                                 
			"A list of load monitoring configuration."
		INDEX   { ifIndex, ubiLoadMonitorType }
		::= { ubiLoadMonitorTable 1 }
 
 
	UbiLoadMonitorEntry ::= SEQUENCE
    {       
    	ubiLoadMonitorType                      INTEGER,
    	ubiLoadMonitorInterval					Integer32,                
    	ubiLoadMonitorVariable				    OBJECT IDENTIFIER,
    	ubiLoadMonitorValue						Counter64,
		ubiLoadMonitorCriticalThreshold			Integer32,   
		ubiLoadMonitorMajorThreshold			Integer32, 
		ubiLoadMonitorUnit						DisplayString,
		ubiLoadMonitorAlarmType					INTEGER,		
		ubiLoadMonitorRowStatus					RowStatus,
		ubiLoadMonitorAlarmZone					INTEGER,				
    }     

	ubiLoadMonitorType OBJECT-TYPE
		SYNTAX     	INTEGER {      
			 input(1), 
			 crc(2), 
			 error(3),
			 drop(4),
			 output(5),
			 storm-control-discard(6)
		}
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"This object specifies the type of load monitoring.
			For example, If type is input, ubiLoadMonitorVariable 
			should be the particular variable related to the input 
			statistics."
		::= { ubiLoadMonitorEntry 1 }

	ubiLoadMonitorInterval OBJECT-TYPE
		SYNTAX     	Integer32
		UNITS		"seconds"
		MAX-ACCESS 	read-create
		STATUS     	current
		DESCRIPTION
			"The monitoring interval."
		::= { ubiLoadMonitorEntry 2 }
 
 	ubiLoadMonitorVariable OBJECT-TYPE
		SYNTAX     	OBJECT IDENTIFIER
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The object identifier of the particular variable 
			 to be sampled for load monitoring. 
			 this variable is decided by ubiLoadMonitorType.
			 
			 variable mapping information for load monitoring:   
			  	type                object identifier
			  ---------------     -------------------------
			 	INPUT               ifHCInOctets   (64bit)
			 	OUTPUT              ifHCOutOctets   (64bit)
			 	CRC                 ubiIfStatsInCRCErrors (64bit)
			 	DISCARD             ifInDiscards  (32bit)
			 	ERROR               ifInErrors  (32bit)
			 	STORM-DISCARD       ubiStormTotalDiscards (64bit)
			"
		::= { ubiLoadMonitorEntry 3 }
 
  	ubiLoadMonitorValue OBJECT-TYPE
		SYNTAX     	Counter64
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The sampling value of the statistic for the 
			particular variable."
		::= { ubiLoadMonitorEntry 4 }
 
	ubiLoadMonitorCriticalThreshold OBJECT-TYPE
		SYNTAX     	Integer32
		MAX-ACCESS  read-create
		STATUS     	current
		DESCRIPTION
 			"The critical threshold for the sampled statistics."
		::= { ubiLoadMonitorEntry 5 } 
 
	ubiLoadMonitorMajorThreshold OBJECT-TYPE
		SYNTAX     	Integer32	 
		MAX-ACCESS  read-create
		STATUS     	current
		DESCRIPTION
 			"The major threshold for the sampled statistics."
		::= { ubiLoadMonitorEntry 6 } 

	ubiLoadMonitorUnit OBJECT-TYPE
		SYNTAX     	DisplayString
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The unit of the sampled statistics and 
			threshold value."
		::= { ubiLoadMonitorEntry 7 }
 

	ubiLoadMonitorAlarmType OBJECT-TYPE
		SYNTAX     	INTEGER {    
			none(0),
			critical(1),
			major(2)
		}
		MAX-ACCESS 	accessible-for-notify
		STATUS     	current
		DESCRIPTION
			"The alarm type. This object is used 
			for notification only."
		::= { ubiLoadMonitorEntry 8 }
 
	ubiLoadMonitorRowStatus OBJECT-TYPE
		SYNTAX     	RowStatus		
		MAX-ACCESS  read-create
		STATUS     	current
		DESCRIPTION
 			"The row status of this entry."
		::= { ubiLoadMonitorEntry 9} 
       
 	ubiLoadMonitorAlarmZone OBJECT-TYPE
		SYNTAX     	INTEGER {    
			normal(0),     
			critical(1),
			major(2)
		}
		MAX-ACCESS 	accessible-for-notify
		STATUS     	current
		DESCRIPTION
			"This object indicates the current alarm zone. "
		::= { ubiLoadMonitorEntry 10 }
      
            
-- ***********************************************************
-- ubiTrafficControl
-- ***********************************************************  

	ubiTrafficControl			OBJECT IDENTIFIER ::= { ubiPortTrafficControl 2 }
	ubiTrafficControlConfig 	OBJECT IDENTIFIER ::= { ubiTrafficControl 1 }
	
	ubiTrafficControlReportInterval		OBJECT-TYPE
		SYNTAX		INTEGER
		{
			default(1)
		}(1..1440)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Interval when alarm is up/down according to traffic count"
		::= { ubiTrafficControlConfig 1 }
		
	ubiTrafficControlObservingPeriod	OBJECT-TYPE
		SYNTAX		INTEGER
		{
			default(1)
		}(1..1440)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Period for counting traffic"
		::= { ubiTrafficControlConfig 2 }
		
	ubiTrafficControlHighAlarmMode		OBJECT-TYPE
		SYNTAX		INTEGER
		{  
			repeatable(0),
			once(1),
			disable(2)
		}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Action that is operated when traffic is over high-threshold"
		::= { ubiTrafficControlConfig 3 }
		
	ubiTrafficControlLowAlarmMode		OBJECT-TYPE
		SYNTAX		INTEGER
		{ 
			once(1),
			disable(2)
		}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Action that is operated when traffic is below low-threshold"
		::= { ubiTrafficControlConfig 4 }
		
-- ***********************************************************
-- ubiTrafficControlTable
-- ***********************************************************	
--	
--	ubiTrafficControlTable	OBJECT-TYPE
--		SYNTAX		SEQUENCE OF UbiTrafficControlEntry
--		MAX-ACCESS	not-accessible
--		STATUS		current
--		DESCRIPTION
--			"The table for traffic-control configuration"
--		::= { ubiTrafficControl 2 }
--		
--	ubiTrafficControlEntry	OBJECT-TYPE
--		SYNTAX		UbiTrafficControlEntry
--		MAX-ACCESS	not-accessible
--		STATUS		current
--		DESCRIPTION
--			"The entry representing traffic-control config.
--			 Index description
--			 	a) ifindex : interface index
--			 	b) trafficBaseType : base type of traffic
--			 		value - pps(1), kbps(2)
--			 	c) trafficType : type of traffic
--			 		value - all(1), unicast(2), broadcast(3), multicast(4)
--			 	d) trafficDirection : direction of traffic
--			 		value - inbound(1), outbound(2)"
--		INDEX	
--		{ 
--			ifindex,
--			trafficBaseType,
--			trafficType,
--			trafficDirection
--		}
--		::= { ubiTrafficControlTable 1 }
--		
--	UbiTrafficControlEntry ::= SEQUENCE {
--		ubiTrafficControlHighThreshold	Integer32,
--		ubiTrafficControlLowThreshold	Integer32,
--		ubiTrafficControlAction			INTEGER,
--		ubiTrafficControlRowStatus		RowStatus		
--	}                                             
--	
--	ubiTrafficControlHighThreshold	OBJECT-TYPE
--		SYNTAX		Integer32(1..1500000)
--		MAX-ACCESS	read-create
--		STATUS		current
--		DESCRIPTION
--			"traffic high-threshold.
--			 kbps could has threshold less than 1000000."
--		::= { ubiTrafficControlEntry 1 }
--		
--	ubiTrafficControlLowThreshold	OBJECT-TYPE
--		SYNTAX		Integer32(1..1500000)
--		MAX-ACCESS	read-create
--		STATUS		current
--		DESCRIPTION
--			"traffic low-threshold.
--			 kbps could has threshold less than 1000000."
--		::= { ubiTrafficControlEntry 2 }
--		
--	ubiTrafficControlAction			OBJECT-TYPE
--		SYNTAX		INTEGER
--		{
--			alarmOnly(1),
--			blockMode(2)		
--		}
--		MAX-ACCESS	read-create
--		STATUS		current
--		DESCRIPTION
--			"traffic action type"
--		::= { ubiTrafficControlEntry 3 }
--	
--	ubiTrafficControlRowStatus		OBJECT-TYPE
--		SYNTAX		RowStatus
--		MAX-ACCESS	read-create
--		STATUS		current
--		DESCRIPTION
--			"row status"
--		::= { ubiTrafficControlEntry 4 }
--
-- ***********************************************************
-- ubiTrafficStatisticsTable
-- ***********************************************************
--
--	ubiTrafficStatisticsTable	OBJECT-TYPE
--		SYNTAX		SEQUENCE OF UbiTrafficStatisticsEntry
--		MAX-ACCESS	not-accessible
--		STATUS		current
--		DESCRIPTION
--			"The table of traffic statistices per interface"
--		::= { ubiTrafficControl 3 }
--		
--	ubiTrafficStatisticsEntry	OBJECT-TYPE
--		SYNTAX		UbiTrafficStatisticsEntry
--		MAX-ACCESS	not-accessible
--		STATUS		current
--		DESCRIPTION
--			"The entry representing intreface traffic statistics.
--			 Index description
--				a) ifindex : interface index
--			 	b) trafficBaseType : base type of traffic
--			 		value - pps(0), kbps(1)
--			 	c) trafficType : type of traffic
--			 		value - all(0), unicast(1), broadcast(2), multicast(3)
--			 	d) trafficDirection : direction of traffic
--			 		value - inbound(0), outbound(1)"
--		INDEX	
--		{ 
--			ifindex,
--			trafficBaseType,
--			TrafficType,
--			trafficDirection			
--		}
--		::= { ubiTrafficStatisticsTable 1 }
--		
--	UbiTrafficStatisticsEntry ::= SEQUENCE {
--		ubiTrafficStatisticsStatus				INTEGER,
--		ubiTrafficStatisticsHighThreshold		Integer32,
--		ubiTrafficStatisticsLowThreshold		Integer32,
--		ubiTrafficStatisticsAverageRate			DisplayString,
--		ubiTrafficStatisticsAlarmCount			Integer32,
--		ubiTrafficStatisticsLastAlarmTime		DisplayString				
--	}                                                
--
--	ubiTrafficStatisticsStatus				OBJECT-TYPE
--		SYNTAX		INTEGER
--		{
--			normal(0),
--			alarmed(1)
--		}
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION
--			"traffic status"
--		::= { ubiTrafficStatisticsEntry 1 }
--			
--	ubiTrafficStatisticsHighThreshold		OBJECT-TYPE
--		SYNTAX		Integer32(1..1500000)
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION
--			"high threshold"
--		::= { ubiTrafficStatisticsEntry 2 }
--		
--	ubiTrafficStatisticsLowThreshold		OBJECT-TYPE
--		SYNTAX		Integer32(1..1500000)
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION
--			"low threshold"
--		::= { ubiTrafficStatisticsEntry 3 }
--		
--	ubiTrafficStatisticsAverageRate		OBJECT-TYPE
--		SYNTAX		DisplayString
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION
--			"average rate"
--		::= { ubiTrafficStatisticsEntry 4 }
--		
--	ubiTrafficStatisticsAlarmCount			OBJECT-TYPE
--		SYNTAX		Integer32
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION
--			"alarm count"
--		::= { ubiTrafficStatisticsEntry 5 }
--		
--	ubiTrafficStatisticsLastAlarmTime		OBJECT-TYPE
--		SYNTAX		DisplayString
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION
--			"last alarm time"
--		::= { ubiTrafficStatisticsEntry 6 }
--

-- ***********************************************************
-- ubiTrafficControlTable
-- ***********************************************************	
	
	ubiTrafficControlTable	OBJECT-TYPE
		SYNTAX		SEQUENCE OF UbiTrafficControlEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The table for traffic-control configuration"
		::= { ubiTrafficControl 2 }
		
	ubiTrafficControlEntry	OBJECT-TYPE
		SYNTAX		UbiTrafficControlEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The entry representing traffic-control config.
			 Index description
			 	a) ubiTrafficControlIfindex : interface index
			 	b) ubiTrafficControlBaseType : base type of traffic
			 		value - pps(1), kbps(2)
			 	c) ubiTrafficControlTrafficType : type of traffic
			 		value - all(1), unicast(2), broadcast(3), multicast(4)
			 	d) ubiTrafficControlDirection : direction of traffic
			 		value - inbound(1), outbound(2)"
		INDEX	
		{ 
			ubiTrafficControlIfindex,
			ubiTrafficControlBaseType,
			ubiTrafficControlType,
			ubiTrafficControlDirection
		}
		::= { ubiTrafficControlTable 1 }
		
	UbiTrafficControlEntry ::= SEQUENCE {
		ubiTrafficControlIfindex		Integer32,
		ubiTrafficControlBaseType		INTEGER,
		ubiTrafficControlType			INTEGER,
		ubiTrafficControlDirection		INTEGER,
		ubiTrafficControlHighThreshold	Integer32,
		ubiTrafficControlLowThreshold	Integer32,
		ubiTrafficControlAction			INTEGER,
		ubiTrafficControlStatus			INTEGER,
		ubiTrafficControlAverageRate	DisplayString,
		ubiTrafficControlOneMinRate		DisplayString,
		ubiTrafficControlAlarmCount		Integer32,
		ubiTrafficControlLastAlarmTime	DisplayString,
		ubiTrafficControlRowStatus		RowStatus
	}
	
	ubiTrafficControlIfindex	OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"A unique value, greater than zero, for each interface.
			It is recommended that values are assigned contiguously
			starting from 1. The value for each interface sub-layer
			must remain constant at least from one re-initialization of
			the entity's network management system to the next re-initialization."
		::= { ubiTrafficControlEntry 1 }
	
	ubiTrafficControlBaseType	OBJECT-TYPE
		SYNTAX		INTEGER
		{
			pps(1),
			kbps(2)
		}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Base type of traffic."
		::= { ubiTrafficControlEntry 2 }
	
	ubiTrafficControlType	OBJECT-TYPE
		SYNTAX		INTEGER
		{
			all(1),
			broadcast(2),
			multicast(3),
			unicast(4)
		}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Type of traffic.
			 Type based on KBPS must be only all(0). remains are only for pps."
		::= { ubiTrafficControlEntry 3 }
	
	ubiTrafficControlDirection	OBJECT-TYPE
		SYNTAX		INTEGER
		{
			inbound(1),
			outbound(2)
		}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Direction of traffic."
		::= { ubiTrafficControlEntry 4 }

	ubiTrafficControlHighThreshold	OBJECT-TYPE
		SYNTAX		Integer32(1..1500000)
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Traffic high-threshold.
		 	Type based on KBPS could has threshold less than 1000000."
		::= { ubiTrafficControlEntry 5 }

	ubiTrafficControlLowThreshold	OBJECT-TYPE
		SYNTAX		Integer32(1..1500000)
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Traffic low-threshold.
			 Type based on KBPS could has threshold less than 1000000."
		::= { ubiTrafficControlEntry 6 }
		
	ubiTrafficControlAction			OBJECT-TYPE
		SYNTAX		INTEGER
		{
			alarmOnly(1),
			blockMode(2)
		}
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Traffic action type."
		::= { ubiTrafficControlEntry 7 }
		
	ubiTrafficControlStatus			OBJECT-TYPE
		SYNTAX		INTEGER
		{
			normal(1),
			alarm(2),
			block(3)
		}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Interface's current status."
		::= { ubiTrafficControlEntry 8 }
		
	ubiTrafficControlAverageRate		OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Average rate of controlled traffic."
		::= { ubiTrafficControlEntry 9 }
		
	ubiTrafficControlOneMinRate		OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Rate of controlled traffic per 1 minute."
		::= { ubiTrafficControlEntry 10 }
	
	ubiTrafficControlAlarmCount			OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Number of alarmed times."
		::= { ubiTrafficControlEntry 11 }
		
	ubiTrafficControlLastAlarmTime		OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Last alarmed time"
		::= { ubiTrafficControlEntry 12 }

	
	ubiTrafficControlRowStatus		OBJECT-TYPE
		SYNTAX		RowStatus
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Row Status"
		::= { ubiTrafficControlEntry 13 }

-- ***********************************************************
-- ubiClearTrafficControl
-- ***********************************************************

	ubiClearTrafficControl		OBJECT IDENTIFIER ::= { ubiTrafficControl 3 }
	
	ubiClearTrafficControlInterface		OBJECT-TYPE
		SYNTAX		Integer32
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION	
			"If value is 0, clear all interface.
			 If value is ifindex, clear specific interface (only physical interface)"
		::= { ubiClearTrafficControl 1 }
		
	ubiClearTrafficControlBaseType		OBJECT-TYPE
		SYNTAX		INTEGER
		{
			none(0),
			pps(1),
			kbps(2)
		}	
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Traffic-control base type.
			 'none' value means all base type."
		::= { ubiClearTrafficControl 2 }
		
	ubiClearTrafficControlType			OBJECT-TYPE
		SYNTAX		INTEGER
		{
			none(0),
			all(1),
			unicast(2),
			broadcast(3),
			multicast(4)
		}               
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Traffic-control type.
			 Type based on KBPS must be all.
			 'none' value means all traffic type."
		::= { ubiClearTrafficControl 3 }
		
	ubiClearTrafficControlDirection		OBJECT-TYPE
		SYNTAX		INTEGER
		{
			none(0),
			inbound(1),
			outbound(2)
		}             
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Traffic-control direction.
			 'none' value means all direction."
		::= { ubiClearTrafficControl 4 }
		
	ubiClearTrafficControlOperate		OBJECT-TYPE
		SYNTAX		INTEGER
		{
			none(0),
			excute(1)
		}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"clear excute"
		::= { ubiClearTrafficControl 5 }
			       
			            
-- ***********************************************************
-- ubiIfClassStatsTable
-- ***********************************************************

  	ubiIfEgressQueueStatsTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiIfEgressQueueStatsEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"This table contains the information for egress 
			queue statistics."
		::=  {  ubiIfStatistics 1 }
                                                
                                                
  	ubiIfEgressQueueStatsEntry OBJECT-TYPE
		SYNTAX     UbiIfEgressQueueStatsEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION                                 
			"A list of the port that configure cos feild. 
			that port collects the pass and drop statistics 
			for egress queue."		
		INDEX   { ifIndex, ubiIfEqStatsQueueId }
		::= { ubiIfEgressQueueStatsTable 1 }
 
 
	UbiIfEgressQueueStatsEntry ::= SEQUENCE
    {       
    	ubiIfEqStatsQueueId            	Integer32,  
    	ubiIfEqStatsPassOctets			Counter64,
    	ubiIfEqStatsDropOctets			Counter64,
      	ubiIfEqStatsPassPkts			Counter,
    	ubiIfEqStatsDropPkts			Counter, 
    	ubiIfEqStatsQueueDescr			DisplayString
    }     

	ubiIfEqStatsQueueId OBJECT-TYPE
		SYNTAX     	Integer32    (0..7)
		MAX-ACCESS 	not-accessible
		STATUS     	current
		DESCRIPTION
			"The queue identifier."
		::= { ubiIfEgressQueueStatsEntry 1 }
 
	ubiIfEqStatsPassOctets OBJECT-TYPE
		SYNTAX     	Counter64
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The pass counter for bytes."
		::= { ubiIfEgressQueueStatsEntry 2 }
 
	ubiIfEqStatsDropOctets OBJECT-TYPE
		SYNTAX     	Counter64
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The drop counter for bytes."
		::= { ubiIfEgressQueueStatsEntry 3 }

	ubiIfEqStatsPassPkts OBJECT-TYPE
		SYNTAX     	Counter
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The pass counter for packets."
		::= { ubiIfEgressQueueStatsEntry 4 }

	ubiIfEqStatsDropPkts OBJECT-TYPE
		SYNTAX     	Counter
		MAX-ACCESS 	read-only
		STATUS     	current
		DESCRIPTION
			"The drop counter for packets."
		::= { ubiIfEgressQueueStatsEntry 5 }  
	
    ubiIfEqStatsQueueDescr   OBJECT-TYPE
		SYNTAX     	DisplayString
		MAX-ACCESS 	read-write
		STATUS     	current
		DESCRIPTION
			"A textual string containing information 
			about the interface's each queue."
		::= { ubiIfEgressQueueStatsEntry 6 }  
 

                                     
-- ***********************************************************
-- ubiIfStatsTable
-- ***********************************************************

  	ubiIfStatsTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiIfStatsEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"This table contains the statistics for physical port."
		::=  {  ubiIfStatistics 2 }
                                   
  	ubiIfStatsEntry OBJECT-TYPE
		SYNTAX     UbiIfStatsEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"A Entry contains the statistics of a particular 
			physical port."
		INDEX   { ifIndex }
		::= { ubiIfStatsTable 1 }
 
 
	UbiIfStatsEntry ::= SEQUENCE
    {
		ubiIfStatsInPkts					Counter64,
		ubiIfStatsOutPkts					Counter64,
		ubiIfStatsInCRCErrors				Counter64,   
		ubiIfStatsCounterClear				INTEGER,   
		ubiIfStatsSnmpClear					INTEGER
    }     
    
	ubiIfStatsInPkts OBJECT-TYPE
		SYNTAX     Counter64
		MAX-ACCESS read-only
		STATUS     current
		DESCRIPTION
			"The number of input packets for a given 
			 physical port."
		::= { ubiIfStatsEntry 1 }
                
	ubiIfStatsOutPkts OBJECT-TYPE
		SYNTAX     Counter64
		MAX-ACCESS  read-only
		STATUS     current
		DESCRIPTION
 			"The number of output packets for a given 
 			physical interface."
		::= { ubiIfStatsEntry 2 }  
                                    
	ubiIfStatsInCRCErrors OBJECT-TYPE
		SYNTAX     Counter64
		MAX-ACCESS  read-only
		STATUS     current
		DESCRIPTION
 			"The number of input CRC errors for a given 
 			interface."
		::= { ubiIfStatsEntry 3 } 
                          
	ubiIfStatsCounterClear OBJECT-TYPE
		SYNTAX     INTEGER {
			none(0),
			clear(1)
		}
		MAX-ACCESS  read-write
		STATUS     current
		DESCRIPTION
 			"Initialize the counter"
		::= { ubiIfStatsEntry 14 }
		                          
	ubiIfStatsSnmpClear OBJECT-TYPE
		SYNTAX     INTEGER {
			none(0),
			clear(1)
		}
		MAX-ACCESS  read-write
		STATUS     current
		DESCRIPTION
 			"Initialize the statistics in this table."
		::= { ubiIfStatsEntry 15 }           
		
-- ***********************************************************
-- ubiIfTrafficRateTable
-- ***********************************************************

	ubiTrafficRateTable		OBJECT-TYPE
		SYNTAX		SEQUENCE OF UbiTrafficRateEntry
		ACCESS		not-accessible     
		STATUS		current
		DESCRIPTION
			"traffic rate per interface"
		::= { ubiIfStatistics 3 }
		
	ubiTrafficRateEntry		OBJECT-TYPE
		SYNTAX		UbiTrafficRateEntry  
		ACCESS		not-accessible     
		STATUS		current
		DESCRIPTION
			"traffic rate per interface"
		INDEX { ifindex }              
		::= { ubiTrafficRateTable 1 }
		
	UbiTrafficRateEntry ::= SEQUENCE {
		ubiIfStatsInTrafficRate		Counter64,
		ubiIfStatsOutTrafficRate	Counter64
	}
		
 	ubiIfStatsInTrafficRate OBJECT-TYPE
		SYNTAX     Counter64
		MAX-ACCESS  read-only
		STATUS     current
		DESCRIPTION
 			""
		::= { ubiTrafficRateEntry 1 }

	ubiIfStatsOutTrafficRate OBJECT-TYPE
		SYNTAX     Counter64
		MAX-ACCESS  read-only
		STATUS     current
		DESCRIPTION
 			""
		::= { ubiTrafficRateEntry 2 }                            
                              
-- ***********************************************************
-- ubiFlowControlTable
-- ***********************************************************
    
    ubiFlowControlTable	OBJECT-TYPE
    	SYNTAX		SEQUENCE OF UbiFlowControlEntry
    	MAX-ACCESS	not-accessible
    	STATUS		current
    	DESCRIPTION
    		"The table of flowcontrol information on physical ports."
    	::= { ubiPortControl 1 }
    
    ubiFlowControlEntry	OBJECT-TYPE
    	SYNTAX		UbiFlowControlEntry
    	MAX-ACCESS	not-accessible
    	STATUS		current
    	DESCRIPTION
    		"An entry of flowcontrol information on physical port."
    	INDEX { ifIndex }
    	::= { ubiFlowControlTable 1 }
    
    UbiFlowControlEntry ::= SEQUENCE 
    {
    	ubiFlowctrlReceive	    INTEGER,
    	ubiFlowctrlSend			INTEGER,
    	ubiFlowctrlWatermark	UbiFlowctrlWatermark
    }
    
    ubiFlowctrlReceive	OBJECT-TYPE
   		SYNTAX		INTEGER
   		{
   			off(0),
   			on(1)
   		}
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"flowcontrol on receive."
   		::= { ubiFlowControlEntry 1 }
   		
   	ubiFlowctrlSend		OBJECT-TYPE
   		SYNTAX		INTEGER
   		{
   			off(0),
   			on(1)
   		}
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"flowcontrol on send"
   		::= { ubiFlowControlEntry 2 }
   		
   	ubiFlowctrlWatermark	OBJECT-TYPE
   		SYNTAX		UbiFlowctrlWatermark
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"flowcontrol watermark value"
   		::= { ubiFlowControlEntry 3 }

-- ***********************************************************                 
-- ubiRateLimit
-- ***********************************************************
	ubiRateLimit		OBJECT IDENTIFIER ::= { ubiPortControl 2 }
  	
   	ubiRateLimitTable	OBJECT-TYPE
   		SYNTAX		SEQUENCE OF UbiRateLimitEntry
   		MAX-ACCESS	not-accessible
   		STATUS		current
   		DESCRIPTION             
   			"The table of rate-limit information on physical ports"							
   		::= { ubiRateLimit 1 }
   		
   	ubiRateLimitEntry	OBJECT-TYPE
   		SYNTAX		UbiRateLimitEntry
   		MAX-ACCESS	not-accessible
   		STATUS		current
   		DESCRIPTION
   			"An entry of rate-limit information on physical port" 
   		INDEX	{ ifIndex }
   		::= { ubiRateLimitTable 1 }
   		
   	UbiRateLimitEntry ::= SEQUENCE
   	{
   		ubiEgressTrafficRate	Integer32,
   		ubiEgressBucketSize		Integer32,
   		ubiIngressLevel			DisplayString
   	}
   	
   	ubiEgressTrafficRate	OBJECT-TYPE
   		SYNTAX		Integer32(1..10000000)
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"egress traffic rate"
   		::= { ubiRateLimitEntry 1 }
   		
   	ubiEgressBucketSize		OBJECT-TYPE
   		SYNTAX		Integer32(1..4095)
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"egress bucket size"
   		::= { ubiRateLimitEntry 2 }
   		
   	ubiIngressLevel			OBJECT-TYPE
   		SYNTAX		DisplayString
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"ingress level, range from 0.01 to 100.00"
   		::= { ubiRateLimitEntry 3 }
   		     
   		     
   	ubiRateLimitQueueEgressTable	OBJECT-TYPE
   		SYNTAX		SEQUENCE OF UbiRateLimitQueueEgressEntry
   		MAX-ACCESS	not-accessible
   		STATUS		current
   		DESCRIPTION
   			"The table of rate-limit q-egress information on physical ports"
   		::= { ubiRateLimit 2 }
   		
   	ubiRateLimitQueueEgressEntry	OBJECT-TYPE
   		SYNTAX		UbiRateLimitQueueEgressEntry
   		MAX-ACCESS	not-accessible
   		STATUS		current
   		DESCRIPTION
   			"An entry of rate-limit q-egress information on physical port"
   		INDEX	{ ifIndex, ubiQueueId }
   		::= { ubiRateLimitQueueEgressTable 1 }
   	
   	
   	UbiRateLimitQueueEgressEntry ::= SEQUENCE
   	{
   		ubiQueueId					Integer32,
   		ubiQueueEgressTrafficRate   Integer32,
   		ubiQueueEgressBucketSize	Integer32
   	}
   	
   	ubiQueueId				OBJECT-TYPE
   		SYNTAX		Integer32(0..7)
   		MAX-ACCESS	not-accessible
   		STATUS		current
   		DESCRIPTION
   			"queue id"
   		::= { ubiRateLimitQueueEgressEntry 1 }
   		
   	ubiQueueEgressTrafficRate	OBJECT-TYPE
   		SYNTAX		Integer32(1..10000000)
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"q-egress traffic rate"
   		::= { ubiRateLimitQueueEgressEntry 2 }
   		
   	ubiQueueEgressBucketSize	OBJECT-TYPE
   		SYNTAX		Integer32(1..4095)
   		MAX-ACCESS	read-write
   		STATUS		current
   		DESCRIPTION
   			"q-egress bucket size"
   		::= { ubiRateLimitQueueEgressEntry 3 }
                                                
                                                
-- ***********************************************************                 
-- ubiStormControlTable
-- ***********************************************************

	ubiStormControlTable	OBJECT-TYPE
		SYNTAX		SEQUENCE OF UbiStormControlEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The table of storm-control information on physical ports"
		::= { ubiPortControl 3 }
		
	ubiStormControlEntry	OBJECT-TYPE
		SYNTAX		UbiStormControlEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"An entry of storm-control information on physical port"
		INDEX	{ ifIndex }
		::= { ubiStormControlTable 1 }
		
	UbiStormControlEntry ::= SEQUENCE
	{
		ubiBroadcastLevel		DisplayString,
		ubiMulticastLevel		DisplayString,
		ubiUnicastLevel			DisplayString
	}
	
	ubiBroadcastLevel		OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"broadcast control level, range from 0.01 to 100.00"
		::= { ubiStormControlEntry 1 }
		
	ubiMulticastLevel		OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"multicast control level, range from 0.01 to 100.00"
		::= { ubiStormControlEntry 2 }
		
	ubiUnicastLevel		OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"unicast control level, range from 0.01 to 100.00"
		::= { ubiStormControlEntry 3 }   		


-- ***********************************************************
-- ubiStormControlStatisticsTable
-- ***********************************************************

	ubiStormDiscardStats		OBJECT IDENTIFIER ::= { ubiPortControl 4 }
	
	ubiStormDiscardStatsClear		OBJECT-TYPE
		SYNTAX     INTEGER {
			none(0),
			clear(1)
		}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Initialize the counters for discarded packet by Storm-Control."
		::= { ubiStormDiscardStats 1 }

	ubiStormDiscardStatsTable		OBJECT-TYPE
		SYNTAX		SEQUENCE OF UbiStormDiscardStatsEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"This table contains the statistics of discarded packets by Storm-control on physical ports"
		::= { ubiStormDiscardStats 2 }

	ubiStormDiscardStatsEntry	OBJECT-TYPE
		SYNTAX		UbiStormDiscardStatsEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"An entry of storm-control discard statistics on physical port"
		INDEX	{ ifIndex }
		::= { ubiStormDiscardStatsTable 1 }

	UbiStormDiscardStatsEntry ::= SEQUENCE
	{
		ubiStormUnicastDiscards		Counter64,
		ubiStormMulticastDiscards	Counter64,
		ubiStormBroadcastDiscards	Counter64,
		ubiStormTotalDiscards		Counter64,
--		ubiStormStatsClear			INTEGER
	}

	ubiStormUnicastDiscards		OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of discarded Unicast packets by Storm-control for a given interface."
		::= { ubiStormDiscardStatsEntry 1 }

	ubiStormMulticastDiscards		OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of discarded Multicast packets by Storm-control for a given interface."
		::= { ubiStormDiscardStatsEntry 2 }

	ubiStormBroadcastDiscards		OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of discarded Broadcast packets by Storm-control for a given interface."
		::= { ubiStormDiscardStatsEntry 3 }

	ubiStormTotalDiscards		OBJECT-TYPE
		SYNTAX		Counter64
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The Total number of discarded packets by Storm-control for a given interface."
		::= { ubiStormDiscardStatsEntry 4 }
	
--	ubiStormStatsClear		OBJECT-TYPE
--		SYNTAX     INTEGER {
--			none(0),
--			clear(1)
--		}
--		MAX-ACCESS	read-write
--		STATUS		current
--		DESCRIPTION
--			"Initialize the counters for discarded packet by Storm-Control."
--		::= { ubiStormControlStatsEntry 5 }

-- ***********************************************************
-- ubiIfErpsTable
-- ***********************************************************

  	ubiIfErpsTable OBJECT-TYPE
		SYNTAX     SEQUENCE OF UbiIfErpsEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION
			"The table of ERPS information on interface."
		::=  {  ubiIfErps 1 }
                                                
                                                
  	ubiIfErpsEntry OBJECT-TYPE
		SYNTAX     UbiIfErpsEntry
		MAX-ACCESS not-accessible
		STATUS     current
		DESCRIPTION                                 
			"The entry of ERPS information on interface."		
		INDEX   { ifIndex }
		::= { ubiIfErpsTable 1 }
 
 
	UbiIfErpsEntry ::= SEQUENCE
    {       
    	ubiIfErpsAggMinLink			Integer32
    }     

	ubiIfErpsAggMinLink OBJECT-TYPE
		SYNTAX     	Integer32 (1..8)
		MAX-ACCESS 	read-write
		STATUS     	current
		DESCRIPTION
			"Minmum Link count to activate Port-channel in ERPS.
			   - To activate Port-channel, actived members of port-channel 
			     must be minmum link count at least."
		::= { ubiIfErpsEntry 1 }
 

                           
-- ***********************************************************
-- ubiIfMIBConformance
-- ***********************************************************
ubiInterfaceMIBCompliances  OBJECT IDENTIFIER		::= { ubiInterfaceMIBConformance 1 }
ubiInterfaceMIBGroups  	 OBJECT IDENTIFIER			::= { ubiInterfaceMIBConformance 2 }
-- Compliance

	ubiInterfaceMIBCompliance MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"The compliance statement for entities which
        	implement the UBQS-INTERFACE-MIB"
   	 	MODULE          -- this module
    	MANDATORY-GROUPS {              
                        ubiPortGroup,
                        ubiIfStatsGroup,
                        ubiSwitchportGroup,
                        ubiTrafficMonitoringGroup,
                        ubiExtIfStatsGroup,
                     } 
    	::= { ubiInterfaceMIBCompliances 1 }


	ubiPortGroup OBJECT-GROUP
    	OBJECTS         {    
    					ubiLinkUpDownEnable,
    					ubiPortMediaDescr,
    					ubiPortGBICState,
    					ubiPortGBICType,
    					ubiPortDuplex,     
    				    ubiPortMtu
                     	}   

    	STATUS          current
    	DESCRIPTION
        	"A collection of objects containing
        	information about physical port."
    	::= { ubiInterfaceMIBGroups 1 }

	
	ubiIfStatsGroup OBJECT-GROUP
    	OBJECTS         {        
 						ubiIfStatsInPkts,						
 						ubiIfStatsOutPkts,						
 						ubiIfStatsInCRCErrors	
                    }
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects containing packet
        	statistics for a given port."
    	::= { ubiInterfaceMIBGroups 2 }     
    	
	ubiSwitchportGroup OBJECT-GROUP
    	OBJECTS         {             
			ubiPortL2L3IfState,    	
			ubiSwitchportName,   
			ubiSwitchportMode,
			ubiSwitchportBridgeId,
			ubiSwitchportVlanNative,
			ubiSwitchportVlanDefault,         
			ubiSwitchportVlanTaggedSet,   
			ubiSwitchportVlanUntaggedSet 
		}
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects containing 
        	the switchport information."
    	::= { ubiInterfaceMIBGroups 3 }
    	
END