path: root/MIBS/ubiquoss/UBQS-DOT1BRIDGE-MIB

-- *****************************************************************
-- UBQS-DOT1BRIDGE-MIB : Ubiquoss DOT1BRIDGE MIB      
--
-- July 2009,   Park Hyung Eun
--   
-- Copyright (c) 2009 by Ubiquoss, Corp.
-- All rights reserved.
-- *****************************************************************
--   

UBQS-DOT1BRIDGE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Counter32,
    IpAddress,
    Gauge32,
    Integer32,
    Unsigned32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    RowStatus,
    DisplayString,
    TruthValue,  
    MacAddress
        FROM SNMPv2-TC
    VlanIndex,
    	FROM Q-BRIDGE-MIB
 	UbiPortList,
 	UbiBridgeId
        FROM UBQS-TC
    ubiMgmtv2
        FROM UBQS-SMI;                                     


ubiDot1BridgeMIB MODULE-IDENTITY
    LAST-UPDATED    "200905260000Z"
    ORGANIZATION 	"Ubiquoss Corp."
	CONTACT-INFO
		"	Ubiquoss
			Customer Service

		 Postal: 24F Milennium B/D,
		 	467-12, Dogok-Dong,
			GangNam-Gu, Seoul 135-270
			Korea

		   Tel: 82-2-2190-3100"     
	DESCRIPTION
        "The MIB module for entities implementing 
        the IEEE 802.1 management."
    ::= { ubiMgmtv2 5 }

 
 
-- *****************************************************************
-- Textual Conventions
-- *****************************************************************
     
VlanStpType   ::= TEXTUAL-CONVENTION
STATUS          current
    DESCRIPTION
        "The type of the Spanning Tree Protocol (STP) running on
        this VLAN."           
    SYNTAX          INTEGER  {    
                        stp(1),
                        stp-vlan-bridge(2),
                        rstp(3),
                        rstp-vlan-bridge(4),
                        mstp(5),
                        provider-rstp(6),
                        provider-mstp(7),
                        rpvstExt(8)		-- rpvst+ 
        }

         
UbiVlanIntType   ::= TEXTUAL-CONVENTION
STATUS          current
    DESCRIPTION
        "The type of the VLAN.         
   		 other(1),
         backbone_p2p(2),        -- backbone point to point  
         backbone_m2m(3),		-- backbone multipoint to multipoint    
         customer(4),
         service_p2p(5),         -- service point to point   
         service_m2m(6)          -- service multipoint to multipoint"
    SYNTAX          INTEGER  {  
    		other(1),
        	backbone_p2p(2),        -- backbone point to point  
        	backbone_m2m(3),		-- backbone multipoint to multipoint    
            customer(4),
            service_p2p(5),         -- service point to point   
            service_m2m(6)          -- service multipoint to multipoint   
   }    

UbiVlanType   ::= TEXTUAL-CONVENTION
STATUS          current
    DESCRIPTION
        "The type of the VLAN."           
    SYNTAX          BITS 
      	{            
            static(0), 
            dynamic(1),  
            cvlan(2),
            svlan(3),
            svlan_p2p(4),
            svlan_m2m(5),
            --PBB
            bvlan(6),
            bvlan_p2p(7),
            bvlan_m2m(8),
            -- PBB TE
            tevlan(9),
            auto(10)
      	}     
      	
UbiBridgeType    ::= TEXTUAL-CONVENTION
STATUS          current
    DESCRIPTION
        "Indicates the component type(s) of this bridge.  The
 		  following component types are possible:
 	
 	    	iComponent(1) - An S-VLAN aware component of a Backbone
 	        		Edge Bridge which performs encapsulation of customer
 	        		frames.
 	
 	    	bComponent(2) - An S-VLAN aware component of a Backbone
 	        		Edge Bridge which bundles backbone service instances
 	        		into B-VLANs.
 	
 	    	cVlanComponent(3) - A C-VLAN aware component of an
 	        		enterprise VLAN bridge or of a Provider Bridge used
 	        		to process C-tagged frames.       
 	         	
 	    	sVlanComponent(4) - An S-VLAN aware component of a
 	        		Provider Bridge.    
  
 	    	dBridgeComponent(5) - A VLAN unaware component of an
 	        		802.1D bridge.
 	       
 	        edgeComponent (6) - A C-VLAN or S-VLAN aware component of a
 	        		Provider Bridge."           
    SYNTAX          INTEGER  {          
			iComponent(1),
			bComponent(2),
			cVlanComponent(3),      		-- vlan bridge or provider edge bridge
			sVlanComponent(4),              -- provider bridge
			dBridgeComponent(5),  
			edgeComponent(6),                -- provider edge bridge
    }                                                        
    
          
 
-- *****************************************************************
-- ubiDo1MIBObjects
-- *****************************************************************

ubiDot1BridgeMIBNotificationsPrefix  	OBJECT IDENTIFIER		::= { ubiDot1BridgeMIB 0 }
ubiVlanMIBObjects  						OBJECT IDENTIFIER		::= { ubiDot1BridgeMIB 1 }        
ubiBridgeMIBObjects  					OBJECT IDENTIFIER		::= { ubiDot1BridgeMIB 2 }
ubiMacAddressTableMIBObjects			OBJECT IDENTIFIER		::= { ubiDot1BridgeMIB 3 }      

ubiDot1BridgeMIBConformance  			OBJECT IDENTIFIER		::= { ubiDot1BridgeMIB 10 }
  
  

-- *****************************************************************
-- ubiVlanMIBNotificationEnables
-- *****************************************************************
ubiVlanNotifications  OBJECT IDENTIFIER			::= { ubiDot1BridgeMIBNotificationsPrefix 0 }

	ubiVlanCreated NOTIFICATION-TYPE
    	OBJECTS         { ubiVlanName }
    	STATUS          current
    	DESCRIPTION
        	"A ubiVlanCreated notification is generated by a
       		device when a VLAN is created."
   	::= { ubiVlanNotifications 1 }

	ubiVlanDeleted NOTIFICATION-TYPE
    	OBJECTS         { ubiVlanName }
    	STATUS          current
    	DESCRIPTION
        	"A ubiVlanDeleted notification is generated by a
        	device when a VLAN is deleted."
   	::= { ubiVlanNotifications 2 }

-- *****************************************************************
-- ubiFdbNotifications
-- *****************************************************************
ubiFdbNotifications  OBJECT IDENTIFIER			::= { ubiDot1BridgeMIBNotificationsPrefix 1 }

	ubiFdbAlarmAsserted NOTIFICATION-TYPE
    	OBJECTS         { }
    	STATUS          current
    	DESCRIPTION
        	"A ubiFdbAlarmAsserted notification is generated by a
       		device when the number of FDB entries exceeds high threshold."
   	::= { ubiFdbNotifications 1 }
   	
	ubiFdbAlarmCleared NOTIFICATION-TYPE
    	OBJECTS         { }
    	STATUS          current
    	DESCRIPTION
        	"A ubiFdbAlarmCleared notification is generated by a
       		device when the number of FDB entries meets low threshold."
   	::= { ubiFdbNotifications 2 }
   
-- *****************************************************************
-- ubiVlanMIBNotificationEnables
-- *****************************************************************

ubiVlanNotificationEnables  OBJECT IDENTIFIER		::= { ubiVlanMIBObjects 1 }

	ubiVlanCreateEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"An indication of whether the notification should
        	be generated when a VLAN is created. 

        	If the value of this object is 'true' then the
        	vlanCreated notification will be generated.

        	If the value of this object is 'false' then the
        	vlanCreated notification will not be generated."        
  	 	DEFVAL          { false } 
    	::= { ubiVlanNotificationEnables 1 }

  	ubiVlanDeleteEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"An indication of whether the notification should
        	be generated when a VLAN is deleted.  

        	If the value of this object is 'true' then the
        	vlanDeleted notification will be generated.

        	If the value of this object is 'false' then the
        	vlanDeleted notification will not be generated."  
  	 	DEFVAL          { false } 
    	::= { ubiVlanNotificationEnables 2 }        
                                          
  
-- *****************************************************************
-- ubiVlanTable
-- *****************************************************************

	ubiVlanTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiVlanEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains information on the VLANs which
        	currently exist."
    	::= { ubiVlanMIBObjects 2 }

  	ubiVlanEntry OBJECT-TYPE
    	SYNTAX          UbiVlanEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Information about one current VLAN."
    	INDEX           { ubiVlanIndex } 
    	::= { ubiVlanTable 1 }

  	
  	UbiVlanEntry ::= SEQUENCE {
        	ubiVlanIndex              	VlanIndex,    
        	ubiVlanIfIndex            	Integer32,  
        	ubiVlanName               	DisplayString,   
        	ubiVlanStatus				INTEGER,
        	ubiVlanType                	UbiVlanType,     
        	ubiVlanMtu					Integer32,       
        	ubiVlanStpType            	INTEGER,
        	ubiVlanRowStatus       		RowStatus
        }

  	ubiVlanIndex OBJECT-TYPE
    	SYNTAX          VlanIndex
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The VLAN-id of this VLAN." 
    	::= { ubiVlanEntry 1 }

  	ubiVlanIfIndex OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The value of the ifIndex corresponding to 
        	 this VLAN-id." 
    	::= { ubiVlanEntry 2 }

  	ubiVlanName OBJECT-TYPE
    	SYNTAX          DisplayString (SIZE  (1..32))
    	MAX-ACCESS      read-create
    	STATUS          current   
    	DESCRIPTION
        	"The name of this VLAN."        
    	::= { ubiVlanEntry 3 }

  	ubiVlanStatus OBJECT-TYPE
    	SYNTAX          INTEGER    
    	{	          
    		inactive(1),
    		active(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"The current state of the VLAN."    
    	DEFVAL          { active }
      	::= { ubiVlanEntry 4 }

  	ubiVlanType OBJECT-TYPE
		SYNTAX      UbiVlanType 
   		MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Indicates the type(s) of this vlan." 
    	::= { ubiVlanEntry 5 }

  	ubiVlanMtu OBJECT-TYPE
    	SYNTAX          Integer32 (1500..10218)
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The MTU size on this VLAN."
    	DEFVAL          { 1500 }  
    	::= { ubiVlanEntry 6 }
 
 
  	ubiVlanStpType OBJECT-TYPE
    	SYNTAX          VlanStpType
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The type of the Spanning Tree Protocol (STP) running on
        	this VLAN.
        	
        	STP Type:                      
        	            stp(1),
                        stp-vlan-bridge(2),
                        rstp(3),
                        rstp-vlan-bridge(4),
                        mstp(5),
                        provider-rstp(6),
                        provider-mstp(7),
                        rpvstExt(8)		-- rpvst+ 
			" 
    	::= { ubiVlanEntry 7 }     
              
  	ubiVlanRowStatus OBJECT-TYPE
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          deprecated
    	DESCRIPTION
        	"The status of Vlan row. This table is deprecated 
        	 by ubiVlanStaticTable." 
    	::= { ubiVlanEntry 8 }
                                                                    
                                                                    
-- *****************************************************************
-- ubiVlanMembershipTable
-- *****************************************************************
	ubiVlanMembershipTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiVlanMembershipEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A table for configuring VLAN port membership.
        	There is one row for each bridge port."
    	::= { ubiVlanMIBObjects 3 }

	ubiVlanMembershipEntry OBJECT-TYPE
    	SYNTAX          UbiVlanMembershipEntry
     	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry (conceptual row) in the ubiVlanMembershipTable."
    	INDEX           { ubiVlanIndex } 
    	::= { ubiVlanMembershipTable 1 }

	UbiVlanMembershipEntry ::= SEQUENCE {  
        ubiVmMemberPorts 			UbiPortList 
       }

	ubiVmMemberPorts OBJECT-TYPE
    	SYNTAX          UbiPortList
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The set of the device's member ports that belong
        	to the VLAN. A bit is corresponding with the bridge port id." 
    	::= { ubiVlanMembershipEntry 1 }
                 
                 
-- *****************************************************************
-- ubiVlanStaticTable   (including vlanType)     
-- *****************************************************************
	ubiVlanStaticTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiVlanStaticEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A table containing static configuration information for
 			 each VLAN. This table contains vlan type for entry creatation 
 			 and encompasses the ubiVlanTable."
    	::= { ubiVlanMIBObjects 4 }

	ubiVlanStaticEntry OBJECT-TYPE
    	SYNTAX          UbiVlanStaticEntry
     	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Static information for a VLAN configured into 
        	the device by management."
   	INDEX           { ubiVlanIndex } 
    	::= { ubiVlanStaticTable 1 }

	UbiVlanStaticEntry ::= SEQUENCE {     
        ubiVlanStaticBridgeId			UbiBridgeId,  
        ubiVlanStaticVlanType 			UbiVlanIntType,   
        ubiVlanStaticAdditiveType		BITS,
        ubiVlanStaticRowStatus			RowStatus,
       }
 
                               
	ubiVlanStaticBridgeId OBJECT-TYPE
    	SYNTAX          UbiBridgeId
    	MAX-ACCESS      read-create    
    	STATUS          current
    	DESCRIPTION
        	"Indicates the bridge group id."        	 
       	::= { ubiVlanStaticEntry 1 }
 
	ubiVlanStaticVlanType OBJECT-TYPE
    	SYNTAX          UbiVlanIntType
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Indicates the type(s) of this vlan.
       
   		 	other(1)
   		 	backbone_p2p(2): backbone point to point  
   		 	backbone_m2m(3): backbone multipoint to multipoint    
   		 	customer(4)
   		 	service_p2p(5): service point to point   
   		 	service_m2m(6): service multipoint to multipoint
		" 
    	::= { ubiVlanStaticEntry 2 }      
    	
	ubiVlanStaticAdditiveType OBJECT-TYPE
    	SYNTAX          BITS {              
    		multicast(0)
    	}
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Indicates the additive characteristic(s) for this vlan.
 				multicast(0) - Indicates a vlan has capability 
 						for multicast traffic"
       	::= { ubiVlanStaticEntry 3 }
                                                                       
	ubiVlanStaticRowStatus OBJECT-TYPE
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The status of vlan row."
       	::= { ubiVlanStaticEntry 4 }                                          
          
-- *****************************************************************
-- ubiBridgeTable
-- *****************************************************************

	ubiBridgeTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiBridgeEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A table that contains generic information about
 			 every bridge group."
    	::= { ubiBridgeMIBObjects 1 }

  	ubiBridgeEntry OBJECT-TYPE
    	SYNTAX          UbiBridgeEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A list of information for each bridge."
    	INDEX           { ubiBridgeId } 
    	::= { ubiBridgeTable 1 }

  	
  	UbiBridgeEntry ::= SEQUENCE {
        	ubiBridgeId              		UbiBridgeId,    
        	ubiBridgeProtocol            	UbiBridgeType,     
	       	ubiBridgeTopology				INTEGER,
        	ubiBridgeAgeingTime				Unsigned32,  
        	ubiBridgeRowStatus      		RowStatus
        	
    }

  	ubiBridgeId OBJECT-TYPE
    	SYNTAX          UbiBridgeId
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The component identifier is used to distinguish between 
        	the multiple virtual bridge instances." 
    	::= { ubiBridgeEntry 1 }
                                     
                                     
  	ubiBridgeProtocol OBJECT-TYPE
    	SYNTAX          UbiBridgeType
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Indicates the component type(s) of this bridge.  The
 		  following component types are possible:
 	
 	    	iComponent(1) - An S-VLAN aware component of a Backbone
 	        		Edge Bridge which performs encapsulation of customer
 	        		frames.
 	
 	    	bComponent(2) - An S-VLAN aware component of a Backbone
 	        		Edge Bridge which bundles backbone service instances
 	        		into B-VLANs.
 	
 	    	cVlanComponent(3) - A C-VLAN aware component of an
 	        		enterprise VLAN bridge or of a Provider Bridge used
 	        		to process C-tagged frames.
 	
 	    	sVlanComponent(4) - An S-VLAN aware component of a
 	        		Provider Bridge.
 	
 	    	dBridgeComponent(5) - A VLAN unaware component of an
 	        		802.1D bridge.        	
 	        
 	        edgeComponent (6) - A C-VLAN or S-VLAN aware component of a
 	        		Provider Bridge." 
    	::= { ubiBridgeEntry 2 }
    
 
  	ubiBridgeTopology OBJECT-TYPE
    	SYNTAX          INTEGER {
    		none(1),
			ring(2)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Topology type of this bridge entry" 
    	::= { ubiBridgeEntry 3 }


  	ubiBridgeAgeingTime OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Ageing time of this bridge entry"
       	::= { ubiBridgeEntry 4}
  
   	ubiBridgeRowStatus OBJECT-TYPE
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The status of bridge row." 
    	::= { ubiBridgeEntry 5 }

                 

-- *****************************************************************
-- ubiBridgePortTable
-- *****************************************************************    

	ubiBridgePortTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiBridgePortEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A table that contains generic information about
 			 every interface information of bridge group."
    	::= { ubiBridgeMIBObjects 2 }

  	ubiBridgePortEntry OBJECT-TYPE
    	SYNTAX          UbiBridgePortEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A list of interface information for each bridge"
    	INDEX           { ubiBridgeId, ubiBridgePort } 
    	::= { ubiBridgePortTable 1 }

  	
  	UbiBridgePortEntry ::= SEQUENCE {    
  			ubiBridgePort				Integer32,    
  			ubiBridgePortIfIndex		Integer32,
  			ubiBridgePortName			DisplayString,
        	ubiBridgePortStatus      	INTEGER
        }

   	ubiBridgePort OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The port number of the port for which this entry
			contains bridge management information." 
    	::= { ubiBridgePortEntry 1 }

   	ubiBridgePortIfIndex OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The value of the instance of the ifIndex object,
 			defined in IF-MIB, for the interface corresponding
 			to this port." 
    	::= { ubiBridgePortEntry 2 }

   	ubiBridgePortName OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"A textual string containing information about this
 			port." 
    	::= { ubiBridgePortEntry 3 }
                 
   	ubiBridgePortStatus OBJECT-TYPE
    	SYNTAX          INTEGER  {
    		none(0), 
    		disabled(1),
    		listening(2),
    		learning(3),
    		forwarding(4),
    		blocking(5),
    		discarding(6),
    		discarding-edge(7)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The current status of the bridge port." 
    	::= { ubiBridgePortEntry 4 }
                 

-- *****************************************************************
-- ubiBridgeVlanTable
-- *****************************************************************    

	ubiBridgeVlanTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiBridgeVlanEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A table that contains generic information about
 			 every VLAN configuration of bridge group."
    	::= { ubiBridgeMIBObjects 3 }

  	ubiBridgeVlanEntry OBJECT-TYPE
    	SYNTAX          UbiBridgeVlanEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Information controlling VLAN configuration for bridge"
    	INDEX           { ubiBridgeId, ubiVlanIndex } 
    	::= { ubiBridgeVlanTable 1 }

  	
  	UbiBridgeVlanEntry ::= SEQUENCE {    
	       	ubiBridgeVlanStatus      	INTEGER
        }
                 
   	ubiBridgeVlanStatus OBJECT-TYPE
    	SYNTAX          INTEGER  {
    		none(0), 
    		up(1),
    		down(2)
       	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The current status of the VLAN" 
    	::= { ubiBridgeVlanEntry 1 }
                                                          
-- *****************************************************************
-- ubiMacAddressTableObjects
-- *****************************************************************
	ubiMacAddressAgingTime			OBJECT-TYPE
		SYNTAX			Integer32(10..600)
		ACCESS			read-write
		STATUS			current
		DESCRIPTION
			"aging-time of mac-address-table"
		::= { ubiMacAddressTableMIBObjects 1 }
		
-- ubiMacTableListTable
		
	ubiMacTableListTable			OBJECT-TYPE
		SYNTAX			SEQUENCE OF UbiMacTableListEntry
		ACCESS			not-accessible
		STATUS			current
		DESCRIPTION
			"The static table of mac-address-table list entrys"
		::= { ubiMacAddressTableMIBObjects 2 }
		
	ubiMacTableListEntry			OBJECT-TYPE
		SYNTAX			UbiMacTableListEntry
		ACCESS			not-accessible
		STATUS			current
		DESCRIPTION
			"The entry representing static mac-address-table list member"
		INDEX	
		{ 
			ubiMacTableAddress,
			ubiMacTableIfindex,
			ubiMacTableType,
			ubiMacTableForward,
			ubiMacTableVlanId
		}
		::= { ubiMacTableListTable 1 }
		
	UbiMacTableListEntry ::= SEQUENCE {
		ubiMacTableAddress		MacAddress, 
		ubiMacTableIfindex		Integer32,
		ubiMacTableType    		INTEGER,
		ubiMacTableForward		INTEGER,		
		ubiMacTableVlanId		Integer32,
		ubiMacTableRowStatus	RowStatus
	}
	
	ubiMacTableAddress		OBJECT-TYPE
		SYNTAX			DisplayString(SIZE(1..6))
		ACCESS			read-only
		STATUS			current
		DESCRIPTION
			"mac address of static mac-address-table entry"
		::= { ubiMacTableListEntry 1 }

	ubiMacTableIfindex		OBJECT-TYPE
		SYNTAX			Integer32
		ACCESS			read-only
		STATUS			current
		DESCRIPTION
			"interface name of static mac-address-table entry"
		::= { ubiMacTableListEntry 2 }		
		
	ubiMacTableType			OBJECT-TYPE
		SYNTAX			INTEGER
		{
			static(1)
--			dynamic(2),
--			multicast(3)
		}
		ACCESS			read-only
		STATUS			current
		DESCRIPTION
			"type of static mac-address-type entry.
			 If create mac-address-table, type must be static"
		::= { ubiMacTableListEntry 3 }
		
	ubiMacTableForward		OBJECT-TYPE
		SYNTAX			INTEGER
		{
			discard(0),
			forward(1)
		}	          
		ACCESS			read-only
		STATUS			current
		DESCRIPTION
			"forward state of static mac-address-table entry"
		::= { ubiMacTableListEntry 4 }

	ubiMacTableVlanId		OBJECT-TYPE
		SYNTAX			Integer32(1..4094)
		ACCESS			read-only
		STATUS			current
		DESCRIPTION
			"vlan of static mac-address-table entry"
		::= { ubiMacTableListEntry 5 }
				
	ubiMacTableRowStatus	OBJECT-TYPE
		SYNTAX			RowStatus
		ACCESS			read-create
		STATUS			current
		DESCRIPTION
			"row status, only static type" 
		::= { ubiMacTableListEntry 6 }			
		
-- ubiMacTableCountTable

--	ubiMacTableVlanCountTable		OBJECT-TYPE
--		SYNTAX			SEQUENCE OF UbiMacTableVlanCountEntry
--		ACCESS			not-accessible
--		STATUS			current
--		DESCRIPTION
--			"The table of mac-address-table vlan count entry"					
--		::= { ubiMacAddressTableObjects 3 }
		
--	ubiMacTableVlanCountEntry		OBJECT-TYPE
--		SYNTAX			UbiMacTableVlanCountEntry
--		ACCESS			not-accessible
--		STATUS			current
--		DESCRIPTION
--			"The entry representing mac-address-table vlan count"
--		INDEX	{ vlanIndex }
--		::= { ubiMacTableVlanCountTable 1 }
		
--	UbiMacTableVlanCountEntry ::= SEQUENCE {
--		ubiMacVlanDynamicCount		Integer32,
--		ubiMacVlanStaticCount		Integer32,
--		ubiMacVlanMulticastCount	Integer32,
--		ubiMacVlanAvailTotal		Integer32
--	}
	
--	ubiMacVlanDynamicCount		OBJECT-TYPE
--		SYNTAX			Integer32
--		ACCESS			read-only
--		STATUS			current
--		DESCRIPTION
--			"dynamic mac count of specific vlan"
--		::= { ubiMacTableVlanCountEntry 1 }
		
--	ubiMacVlanStaticCount		OBJECT-TYPE
--		SYNTAX			Integer32
--		ACCESS			read-only
--		STATUS			current
--		DESCRIPTION
--			"static mac count of specific vlan"
--		::= { ubiMacTableVlanCountEntry 2 }
		
--	ubiMacVlanMulticastCount	OBJECT-TYPE
--		SYNTAX			Integer32
--		ACCESS			read-only
--		STATUS			current
--		DESCRIPTION
--			"multicast mac count of specific vlan"
--		::= { ubiMacTableVlanCountEntry 3 }
		

-- ubiClearMacTable 
    ubiClearMacTable		OBJECT IDENTIFIER ::= { ubiMacAddressTableMIBObjects 3 }
	
    ubiClearMacType			OBJECT-TYPE
    	SYNTAX			INTEGER
    	{
    		static(1),
    		dynamic(2),
    		multicast(3)
    	}               
    	ACCESS			read-write
    	STATUS			current
    	DESCRIPTION
    		"type of mac-address-table list to be cleared"
    	::= { ubiClearMacTable 1 }
    	
    ubiClearMacAddress		OBJECT-TYPE
    	SYNTAX			DisplayString(SIZE(1..14))
    	ACCESS			read-write
    	STATUS			current
    	DESCRIPTION
    		"address of mac-address-table list to be cleared.
    		 If this value is set, 
    		 ifindex and vlanId must not be set."
    	::= { ubiClearMacTable 2 }
    	
    ubiClearMacIfindex		OBJECT-TYPE
    	SYNTAX			Integer32
    	ACCESS			read-write
    	STATUS			current
    	DESCRIPTION
    		"ifindex of mac-address-table list to be cleared.
    		 If this value is set,
    		 macAddr and vlanId must not be set."
    	::= { ubiClearMacTable 3 }
    	
    ubiClearMacVlanId		OBJECT-TYPE
    	SYNTAX			Integer32(1..4094)
    	ACCESS			read-write
    	STATUS			current
    	DESCRIPTION
    		"vlan id of mac-address-table list to be cleared.
    		 If this value is set,
    		 macAddr and ifindex must not be set."
    	::= { ubiClearMacTable 4 }
    	
    ubiClearMacBridgeId		OBJECT-TYPE
    	SYNTAX			Integer32(1..32)
    	ACCESS			read-write
    	STATUS			current
    	DESCRIPTION
    		"bridge id of mac-address-table list to be cleared"
    	::= { ubiClearMacTable 5 }
    	
    ubiClearMacInstanceId	OBJECT-TYPE
    	SYNTAX			Integer32(1..63)
    	ACCESS			read-write
    	STATUS			current
    	DESCRIPTION
    		"instance id of mac-address-table list to be cleared.
    		 before set this value, ifindex must be set."
    	::= { ubiClearMacTable 6 }		
    
	ubiClearMacExcute		OBJECT-TYPE
		SYNTAX			INTEGER
		{
			none(0),
			excute(1)
		}	 		 
		ACCESS			read-write 
		STATUS			current
		DESCRIPTION
			"value to control to clear mac-address-table"
		::= { ubiClearMacTable 7 }    
		
-- *****************************************************************
-- ubiMacTotalCount
-- *****************************************************************
	ubiMacTotalCount			OBJECT-TYPE
		SYNTAX			Integer32
		ACCESS			read-only
		STATUS			current
		DESCRIPTION
			"Total count of mac-address-table"
		::= { ubiMacAddressTableMIBObjects 4 }

	
			 
                                                       
-- *****************************************************************
-- ubiDot1MIBConformance
-- *****************************************************************

-- Conformance Information
ubiDot1BridgeMIBCompliances  	OBJECT IDENTIFIER		::= { ubiDot1BridgeMIBConformance 1 }
ubiDot1BridgeMIBGroups  		OBJECT IDENTIFIER		::= { ubiDot1BridgeMIBConformance 2 }


-- compliance statements

	ubiVlanMIBCompliance MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"The compliance statement for DOT1 implementations."
    	MODULE          -- this module
    	MANDATORY-GROUPS {             
                        ubiVlanGroup,   
                        ubiVlanNotifEnabledGroup,
                    }
    	::= { ubiDot1BridgeMIBCompliances 1 }

-- units of conformance

	ubiVlanGroup OBJECT-GROUP
    	OBJECTS         {   
    					ubiVlanIndex,
    					ubiVlanIfIndex,
                        ubiVlanState,
                        ubiVlanType,
                        ubiVlanName,
                        ubiVlanMtu,
                        ubiVlanStpType,
                        ubiVlanRowStatus,
                        ubiVmMemberPorts
                    }
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects for the monitoring 
        	 VLAN information."
    	::= { ubiDot1BridgeMIBGroups 1 }

	ubiVlanNotifEnabledGroup OBJECT-GROUP
    	OBJECTS         {
                        ubiVlanCreatedNotifEnabled,
                        ubiVlanDeletedNotifEnabled
                    }
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects to indicate whether a
        	certain group of notifications are enabled."
    	::= { ubiDot1BridgeMIBGroups 2 }
  
	ubiVlanStaticGroup OBJECT-GROUP
    	OBJECTS         {   
    					ubiVlanStaticBridgeId ,
    					ubiVlanStaticVlanType ,
                        ubiVlanStaticAdditiveType ,
                        ubiVlanStaticRowStatus 
        }
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects for VLAN creation with type."
    	::= { ubiDot1BridgeMIBGroups 3 }
 
-- compliance statements

	ubiBridgeMIBCompliance MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"The compliance statement for DOT1 implementations."
    	MODULE          -- this module
    	MANDATORY-GROUPS {             
                        ubiBridgeGroup,    
                        ubiBridgePortGroup,
                        ubiBridgeVlanGroup
                    }
    	::= { ubiDot1BridgeMIBCompliances 2 }

-- units of conformance

	ubiBridgeGroup OBJECT-GROUP
    	OBJECTS         {   
    					ubiBridgeId,
    					ubiBridgeProtocol,
                        ubiVlubiBridgeTopology,
                        ubiBridgeAgeingTime,
                        ubiBridgeRowStatus 
        }
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects for the bridge information."
    	::= { ubiDot1BridgeMIBGroups 4 }

	ubiBridgePortGroup OBJECT-GROUP
    	OBJECTS         {   
    					ubiBridgePort ,
    					ubiBridgePortIfIndex ,
                        ubiBridgePortName ,
                        ubiBridgePortStatus 
        }
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects for the bridge port information."
    	::= { ubiDot1BridgeMIBGroups 5 }
 
	ubiBridgeVlanGroup OBJECT-GROUP
    	OBJECTS         {   
    				ubiBridgeVlanStatus 
    	}
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects for the bridge VLAN information."
    	::= { ubiDot1BridgeMIBGroups 6 }     
    	
  
  
END