path: root/MIBS/ubiquoss/UBQS-CFM-MIB

-- *****************************************************************
-- UBQS-CFM-MIB: Ubiquoss CFM MIB      
--
-- Nov 2010,   Park Hyung Eun
--   
-- Copyright (c) 2010 by Ubiquoss, Corp.
-- All rights reserved.
-- *****************************************************************
--   

UBQS-CFM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,                                                                      
    Counter32,
    IpAddress,
    Gauge32,
    Integer32,
    Unsigned32,
        FROM SNMPv2-SMI 
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP,
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    RowStatus,
    DisplayString,
    TruthValue,
    MacAddress,   
        FROM SNMPv2-TC
    ubiAggId,
    	FROM UBQS-LAG-MIB    
    ifIndex,
        FROM IF-MIB    
    ubiMgmtv2
        FROM UBQS-SMI;


ubiCFMMIB MODULE-IDENTITY
    LAST-UPDATED    "201011250000Z"
    ORGANIZATION 	"Ubiquoss Corp."
	CONTACT-INFO
		"	Ubiquoss
			Customer Service

		 Postal: 24F Milennium B/D,
		 	467-12, Dogok-Dong,
			GangNam-Gu, Seoul 135-270
			Korea

		   Tel: 82-2-2190-3100"     
	DESCRIPTION
        "Connectivity Fault Management module for managing IEEE 802.1ag"      
        
    ::= { ubiMgmtv2 10 }

 
-- *****************************************************************
-- Textual Conventions
-- *****************************************************************
 
VlanIndex ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The VLAN-id of a VLAN on ISL or 802.1q trunks.

        Modification of default parameters is allowed.
        Implementations are allowed to restrict
        the range of VLANs.

        For entities support up to 1024 VLANS.
        VLANs above 1000 are reserved for default VLANs and
        future use. Modification of default parameters is
        allowed. Creation or deletion of VLANs above 1000 is not
        allowed.

        For a new object which needs the vlan-id of a VLAN as
        its SYNTAX, it is suggested to import VlanIndex from
        Q-BRIDGE-MIB instead of importing this TC here in 
        ubi-VTP-MIB."
    SYNTAX          Integer32 (0..4095)

Dot1agCfmMaintDomainNameType2 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A value that represents a type (and thereby the format)
        of a Dot1agCfmMaintDomainName.  The value can be one of
        the following:


        ieeeReserved(0)   Reserved for definition by IEEE 802.1
                          recommend to not use zero unless
                          absolutely needed.
        none(1)           No format specified, usually because
                          there is not (yet) a Maintenance
                          Domain Name. In this case, a zero
                          length OCTET STRING for the Domain
                          Name field is acceptable.
        dnsLikeName(2)    Domain Name like string, globally unique
                          text string derived from a DNS name.
        macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
        charString(4)     RFC2579 DisplayString, except that the
                          character codes 0-31 (decimal) are not
                          used.
        ieeeReserved(xx)  Reserved for definition by IEEE 802.1
                          xx values can be [5..31] and [64..255]
        ituReserved(xx)   Reserved for definition by  ITU-T Y.1731
                          xx values range from [32..63]

        To support future extensions, the Dot1agCfmMaintDomainNameType
        textual convention SHOULD NOT be sub-typed in object type
        definitions.  It MAY be sub-typed in compliance statements in
        order to require only a subset of these address types for a
        compliant implementation.

        Implementations MUST ensure that Dot1agCfmMaintDomainNameType
        objects and any dependent objects (e.g.,
        Dot1agCfmMaintDomainName objects) are consistent.  An
        inconsistentValue error MUST be generated if an attempt to
        change an Dot1agCfmMaintDomainNameType object would, for
        example, lead to an undefined Dot1agCfmMaintDomainName value.
        In particular,
        Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs
        MUST be changed together if the nameType changes.
       "
    REFERENCE
       "21.6.5, Table 21-19"
    SYNTAX      INTEGER {
                  none              (1),       -- no md name
                  dnsLikeName       (2),       -- dns name
                  macAddressAndUint (3),       -- mac addr
                  charString        (4),        -- string  
                  itu_t				(32)	   -- itu-t					
                }

Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Denotes a generic Maintenance Domain Name.

        A Dot1agCfmMaintDomainName value is always interpreted within
        the context of a Dot1agCfmMaintDomainNameType value.  Every
        usage of the Dot1agCfmMaintDomainName textual convention is
        required to specify the Dot1agCfmMaintDomainNameType object
        that provides the context.  It is suggested that the
        Dot1agCfmMaintDomainNameType object be logically registered
        before the object(s) that use the Dot1agCfmMaintDomainName
        textual convention, if they appear in the same logical row.

        The value of a Dot1agCfmMaintDomainName object MUST always
        be consistent with the value of the associated
        Dot1agCfmMaintDomainNameType object. Attempts to set
        an Dot1agCfmMaintDomainName object to a value inconsistent
        with the associated Dot1agCfmMaintDomainNameType MUST fail
        with an inconsistentValue error.

        When this textual convention is used as the syntax of an
        index object, there may be issues with the limit of 128
        sub-identifiers specified in SMIv2, IETF STD 58.  In this
        case, the object definition MUST include a 'SIZE' clause
        to limit the number of potential instance sub-identifiers;
        otherwise the applicable constraints MUST be stated in
        the appropriate conceptual row DESCRIPTION clauses, or
        in the surrounding documentation if there is no single
        DESCRIPTION clause that is appropriate.

        A value of none(1) in the associated
        Dot1agCfmMaintDomainNameType object means that no Maintenance
        Domain name is present, and the contents of the
        Dot1agCfmMaintDomainName object are meaningless.

        See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
        TEXTUAL-CONVENTION for a discussion of the length limits on
        the Maintenance Domain name and Maintenance Association name.
       "
    REFERENCE
         "21.6.5"
    SYNTAX      OCTET STRING (SIZE(1..256))

Dot1agCfmMaintAssocNameType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A value that represents a type (and thereby the format)
        of a Dot1agCfmMaintAssocName.  The value can be one of
        the following:

        ieeeReserved(0)   Reserved for definition by IEEE 802.1
                          recommend to not use zero unless
                          absolutely needed.
        primaryVid(1)     Primary VLAN ID.
                          12 bits represented in a 2-octet integer:
                          - 4 least significant bits of the first
                            byte contains the 4 most significant 
                            bits of the 12 bits primary VID
                          - second byte contains the 8 least
                            significant bits of the primary VID

                                 0 1 2 3 4 5 6 7 8
                                 +-+-+-+-+-+-+-+-+
                                 |0 0 0 0| (MSB) |
                                 +-+-+-+-+-+-+-+-+
                                 |  VID   LSB    |
                                 +-+-+-+-+-+-+-+-+

        charString(2)     RFC2579 DisplayString, except that the
                          character codes 0-31 (decimal) are not
                          used. (1..45) octets
        unsignedInt16 (3) 2-octet integer/big endian
        rfc2865VpnId(4)   RFC 2685 VPN ID
                          3 octet VPN authority Organizationally
                          Unique Identifier followed by 4 octet VPN
                          index identifying VPN according to the OUI:

                                 0 1 2 3 4 5 6 7 8
                                 +-+-+-+-+-+-+-+-+
                                 | VPN OUI (MSB) |
                                 +-+-+-+-+-+-+-+-+
                                 |   VPN OUI     |
                                 +-+-+-+-+-+-+-+-+
                                 | VPN OUI (LSB) |
                                 +-+-+-+-+-+-+-+-+
                                 |VPN Index (MSB)|
                                 +-+-+-+-+-+-+-+-+
                                 |  VPN Index    |
                                 +-+-+-+-+-+-+-+-+
                                 |  VPN Index    |
                                 +-+-+-+-+-+-+-+-+
                                 |VPN Index (LSB)|
                                 +-+-+-+-+-+-+-+-+

        ieeeReserved(xx)  Reserved for definition by IEEE 802.1
                          xx values can be [5..31] and [64..255]
        ituReserved(xx)   Reserved for definition by  ITU-T Y.1731
                          xx values range from [32..63]

        To support future extensions, the Dot1agCfmMaintAssocNameType
        textual convention SHOULD NOT be sub-typed in object type
        definitions.  It MAY be sub-typed in compliance statements in
        order to require only a subset of these address types for a
        compliant implementation.

        Implementations MUST ensure that Dot1agCfmMaintAssocNameType
        objects and any dependent objects (e.g.,
        Dot1agCfmMaintAssocName objects) are consistent.  An
        inconsistentValue error MUST be generated if an attempt to
        change an Dot1agCfmMaintAssocNameType object would, for
        example, lead to an undefined Dot1agCfmMaintAssocName value.
        In particular,
        Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs
        MUST be changed together if the nameType changes.

        The Maintenance Domain name and Maintenance Association name,
        when put together into the CCM PDU, MUST total 48 octets or
        less.  If the Dot1agCfmMaintDomainNameType object contains
        none(1), then the Dot1agCfmMaintAssocName object MUST be
        45 octets or less in length.  Otherwise, the length of
        the Dot1agCfmMaintDomainName object plus the length of the
        Dot1agCfmMaintAssocName object, added together, MUST total
        less than or equal to 44 octets.
       " 
    REFERENCE
       "21.6.5.4, Table 21-20"
    SYNTAX      INTEGER {
                  primaryVid        (1),
                  charString        (2),    
                  unsignedInt16     (3),   
                  rfc2865VpnId      (4)
                }

Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Denotes a generic Maintenance Association Name. It is the
        part of the Maintenance Association Identifier which is
        unique within the Maintenance Domain Name and is appended
        to the Maintenance Domain Name to form the Maintenance
        Association Identifier (MAID).

        A Dot1agCfmMaintAssocName value is always interpreted within
        the context of a Dot1agCfmMaintAssocNameType value.  Every
        usage of the Dot1agCfmMaintAssocName textual convention is
        required to specify the Dot1agCfmMaintAssocNameType object
        that provides the context.  It is suggested that the
        Dot1agCfmMaintAssocNameType object be logically registered
        before the object(s) that use the Dot1agCfmMaintAssocName
        textual convention, if they appear in the same logical row.

        The value of a Dot1agCfmMaintAssocName object MUST 
        always be consistent with the value of the associated
        Dot1agCfmMaintAssocNameType object. Attempts to set
        an Dot1agCfmMaintAssocName object to a value inconsistent
        with the associated Dot1agCfmMaintAssocNameType MUST fail
        with an inconsistentValue error.

        When this textual convention is used as the syntax of an
        index object, there may be issues with the limit of 128
        sub-identifiers specified in SMIv2, IETF STD 58.  In this
        case, the object definition MUST include a 'SIZE' clause
        to limit the number of potential instance sub-identifiers;
        otherwise the applicable constraints MUST be stated in
        the appropriate conceptual row DESCRIPTION clauses, or
        in the surrounding documentation if there is no single
        DESCRIPTION clause that is appropriate.
       "
    REFERENCE
       "802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
    SYNTAX      OCTET STRING (SIZE(1..256))


Dot1agCfmMDLevel ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
       "Integer identifying the Maintenance Domain Level (MD Level).
        Higher numbers correspond to higher Maintenance Domains,
        those with the greatest physical reach, with the highest
        values for customers' CFM PDUs.  Lower numbers correspond
        to lower Maintenance Domains, those with more limited
        physical reach, with the lowest values for CFM PDUs
        protecting single bridges or physical links.
       "
    REFERENCE
       "802.1ag clauses 18.3, 21.4.1"
    SYNTAX      Integer32 (0..7)

Dot1agCfmMDLevelOrNone ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
       "Integer identifying the Maintenance Domain Level (MD Level).
        Higher numbers correspond to higher Maintenance Domains,
        those with the greatest physical reach, with the highest
        values for customers' CFM packets.  Lower numbers correspond
        to lower Maintenance Domains, those with more limited
        physical reach, with the lowest values for CFM PDUs
        protecting single bridges or physical links.

        The value (-1) is reserved to indicate that no MA Level has
        been assigned.
       "
    REFERENCE
       "802.1ag clauses 18.3, 12.14.3.1.3:c"
    SYNTAX      Integer32 (-1 | 0..7)

Dot1agCfmMpDirection ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Indicates the direction in which the Maintenance
        association (MEP or MIP) faces on the bridge port:

        down(1)    Sends Continuity Check Messages away from the
                   MAC Relay Entity.
        up(2)      Sends Continuity Check Messages towards the
                   MAC Relay Entity.
       "
    REFERENCE
       "802.1ag clauses 12.14.6.3.2:c"
    SYNTAX      INTEGER {
                  down  (1),
                  up    (2)
                }

Dot1agCfmPortStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "An enumerated value from he Port Status TLV from the last CCM
        received from the last MEP. It indicates the ability of the
        Bridge Port on which the transmitting MEP resides to pass
        ordinary data, regardless of the status of the MAC
        (Table 21-10).

        psNoPortStateTLV(0) Indicates either that no CCM has been
                            received or that no port status TLV was
                            present in the last CCM received.

        psBlocked(1)        Ordinary data cannot pass freely through
                            the port on which the remote MEP resides.
                            Value of enableRmepDefect is equal to
                            false.

        psUp(2):            Ordinary data can pass freely through
                            the port on which the remote MEP resides.
                            Value of enableRmepDefect is equal to
                            true.

        NOTE: A 0 value is used for psNoPortStateTLV, so that
              additional code points can be added in a manner
              consistent with the Dot1agCfmInterfaceStatus textual
              convention.
       "
    REFERENCE
       "12.14.7.6.3:f, 20.19.3 and 21.5.4"
    SYNTAX      INTEGER {
                  psNoPortStateTLV  (0),
                  psBlocked         (1),
                  psUp              (2)
                }

Dot1agCfmInterfaceStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "An enumerated value from the Interface Status TLV from the 
        last CCM received from the last MEP. It indicates the status
        of the Interface within which the MEP transmitting the CCM
        is configured, or the next lower Interface in the Interface
        Stack, if the MEP is not configured within an Interface.

    isNoInterfaceStatusTLV(0)  Indicates either that no CCM has been
                          received or that no interface status TLV
                          was present in the last CCM received.

    isUp(1)               The interface is ready to pass packets.

    isDown(2)             The interface cannot pass packets

    isTesting(3)          The interface is in some test mode.
   
    isUnknown(4)          The interface status cannot be determined
                          for some reason.

    isDormant(5)          The interface is not in a state to pass
                          packets but is in a pending state, waiting
                          for some external event.
    
    isNotPresent(6)       Some component of the interface is missing
    
    isLowerLayerDown(7)   The interface is down due to state of the
                          lower layer interfaces

        NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that
              these code points can be kept consistent with new code
              points added to ifOperStatus in the IF-MIB.

       "
    REFERENCE
       "12.14.7.6.3:g, 20.19.4 and 21.5.5"
    SYNTAX      INTEGER {
                  isNoInterfaceStatusTLV  (0),
                  isUp                    (1),
                  isDown                  (2),
                  isTesting               (3),
                  isUnknown               (4),
                  isDormant               (5),
                  isNotPresent            (6),
                  isLowerLayerDown        (7)
                }

Dot1agCfmHighestDefectPri ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "An enumerated value, equal to the contents of the variable
        highestDefect (20.33.9 and Table 20-1), indicating the
        highest-priority defect that has been present since the MEP
        Fault Notification Generator State Machine was last in the 
        FNG_RESET state, either:

        none(0)           no defects since FNG_RESET
        defRDICCM(1)      DefRDICCM
        defMACstatus(2)   DefMACstatus
        defRemoteCCM(3)   DefRemoteCCM
        defErrorCCM(4)    DefErrorCCM
        defXconCCM(5)     DefXconCCM

        The value 0 is used for no defects so that additional higher
        priority values can be added, if needed, at a later time, and
        so that these values correspond with those in
        Dot1agCfmLowestAlarmPri.
       "
    REFERENCE
       "20.1.2, 12.14.7.7.2:c and 20.33.9"
    SYNTAX      INTEGER {
                  none              (0),
                  defRDICCM         (1),
                  defMACstatus      (2),
                  defRemoteCCM      (3),
                  defErrorCCM       (4),
                  defXconCCM        (5)
                }

Dot1agCfmLowestAlarmPri ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "An integer value specifying the lowest priority defect
        that is allowed to generate a Fault Alarm (20.9.5), either:

        allDef(1)           DefRDICCM, DefMACstatus, DefRemoteCCM,
                            DefErrorCCM, and DefXconCCM;
        macRemErrXcon(2)    Only DefMACstatus, DefRemoteCCM,
                            DefErrorCCM, and DefXconCCM (default);
        remErrXcon(3)       Only DefRemoteCCM, DefErrorCCM,
                            and DefXconCCM;
        errXcon(4)          Only DefErrorCCM and DefXconCCM;
        xcon(5)             Only DefXconCCM; or
        noXcon(6)           No defects DefXcon or lower are to be
                            reported;
       "
    REFERENCE
       "12.14.7.1.3:k and 20.9.5"
    SYNTAX      INTEGER {
                  allDef            (1),
                  macRemErrXcon     (2),
                  remErrXcon        (3),
                  errXcon           (4),
                  xcon              (5),
                  noXcon            (6)
                }

Dot1agCfmMepId ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
       "Maintenance association End Point Identifier (MEPID): A small
        integer, unique over a given Maintenance Association,
        identifying a specific MEP.
       "
    REFERENCE
       "802.1ag clauses 3.19 and 19.2.1"
    SYNTAX      Unsigned32 (1..8191)

Dot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
       "Maintenance association End Point Identifier (MEPID): A small
        integer, unique over a given Maintenance Association,
        identifying a specific MEP.
 
        The special value 0 is allowed to indicate special cases, for
        example that no MEPID is configured.

        Whenever an object is defined with this SYNTAX, then the
        DESCRIPTION clause of such an object MUST specify what the
        special value of 0 means.
       "
    REFERENCE
       "19.2.1"
    SYNTAX      Unsigned32 (0 | 1..8191)

Dot1agCfmMhfCreation ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Indicates if the Management Entity can create MHFs.
        The valid values are:

        defMHFnone(1)      No MHFs can be created for this VID.
        defMHFdefault(2)   MHFs can be created on this VID on any
                           Bridge port through which this VID can
                           pass.
        defMHFexplicit(3)  MHFs can be created for this VID only on
                           Bridge ports through which this VID can
                           pass, and only if a MEP is created at some
                           lower MD Level.
        defMHFdefer(4)     The creation of MHFs is determined by the
                           corresponding Maintenance Domain variable
                           (dot1agCfmMaCompMhfCreation).
       "
    REFERENCE
       "12.14.5.1.3:c and 22.2.3"
    SYNTAX      INTEGER {
                  defMHFnone     (1),
                  defMHFdefault  (2),
                  defMHFexplicit (3),
                  defMHFdefer    (4)
                }

Dot1agCfmIdPermission ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Indicates what, if anything, is to be included in the Sender
        ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs.  The valid
        values are:

        sendIdNone(1)      The Sender ID TLV is not to be sent.
        sendIdChassis(2)   The Chassis ID Length, Chassis ID
                           Subtype, and Chassis ID fields of  the
                           Sender ID TLV are to be sent.
        sendIdManage(3)    The Management Address Length and
                           Management Address of the Sender ID TLV
                           are to be sent.
        sendIdChassisManage(4) The Chassis ID Length, Chassis ID
                           Subtype, Chassis ID, Management Address
                           Length and Management Address fields are
                           all to be sent.
        sendIdDefer(5)     The contents of the Sender ID TLV are
                           determined by the corresponding
                           Maintenance Domain variable
                           (dot1agCfmMaCompIdPermission).
       "
    REFERENCE
       "12.14.6.1.3:d and 21.5.3"
    SYNTAX      INTEGER {
                  sendIdNone          (1),
                  sendIdChassis       (2),
                  sendIdManage        (3),
                  sendIdChassisManage (4),
                  sendIdDefer         (5)
                }

Dot1agCfmCcmInterval ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Indicates the interval at which CCMs are sent by a MEP.
        The possible values are:
        intervalInvalid(0) No CCMs are sent (disabled).
        interval300Hz(1)   CCMs are sent every 3 1/3 milliseconds
                           (300Hz).
        interval10ms(2)    CCMs are sent every 10 milliseconds.
        interval100ms(3)   CCMs are sent every 100 milliseconds.
        interval1s(4)      CCMs are sent every 1 second.
        interval10s(5)     CCMs are sent every 10 seconds.
        interval1min(6)    CCMs are sent every minute.
        interval10min(7)   CCMs are sent every 10 minutes.

        Note: enumerations start at zero to match the 'CCM Interval
              field' protocol field.
       "
    REFERENCE
       "802.1ag clauses 12.14.6.1.3:e, 20.8.1 and 21.6.1.3"
    SYNTAX      INTEGER {
                  intervalInvalid   (0),
                  interval300Hz     (1),
                  interval10ms      (2),
                  interval100ms     (3),
                  interval1s        (4),
                  interval10s       (5),
                  interval1min      (6),
                  interval10min     (7)
                }

Dot1agCfmFngState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Indicates the diferent states of the MEP Fault Notification
        Generator State Machine.

        fngReset(1)            No defect has been present since the
                               dot1agCfmMepFngResetTime timer
                               expired, or since the state machine
                               was last reset.

        fngDefect(2)           A defect is present, but not for a
                               long enough time to be reported 
                               (dot1agCfmMepFngAlarmTime).

        fngReportDefect(3)     A momentary state during which the
                               defect is reported by sending a
                               dot1agCfmFaultAlarm notification,
                               if that action is enabled.

        fngDefectReported(4)   A defect is present, and some defect
                               has been reported.

        fngDefectClearing(5)   No defect is present, but the
                               dot1agCfmMepFngResetTime timer has
                               not yet expired.
       "
    REFERENCE
       "12.14.7.1.3:f and 20.35"
    SYNTAX      INTEGER {
                  fngReset          (1),
                  fngDefect         (2),
                  fngReportDefect   (3),
                  fngDefectReported (4),
                  fngDefectClearing (5)
                }

Dot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Possible values the Relay action field can take."
    REFERENCE
       "802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and
        Table 21-27"
    SYNTAX      INTEGER {
                  rlyHit     (1),
                  rlyFdb     (2),
                  rlyMpdb    (3)
                }
               
Dot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Possible values returned in the ingress action field."
    REFERENCE
       "802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and
        Table 21-30
       "
    SYNTAX      INTEGER {
                  ingNoTlv    (0),
                  ingOk       (1),
                  ingDown     (2),
                  ingBlocked  (3),
                  ingVid      (4)
                }

Dot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Possible values returned in the egress action field"
    REFERENCE
       "802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and
        Table 21-32"
    SYNTAX      INTEGER {
                  egrNoTlv    (0),
                  egrOK       (1),
                  egrDown     (2),
                  egrBlocked  (3),
                  egrVid      (4)
                }

Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Operational state of the remote MEP state machine.  This
        state machine monitors the reception of valid CCMs from a
        remote MEP with a specific MEPID.  It uses a timer that
        expires in 3.5 times the length of time indicated by the
        dot1agCfmMaNetCcmInterval object.

        rMepIdle(1)            Momentary state during reset.

        rMepStart(2)           The timer has not expired since the
                               state machine was reset, and no valid
                               CCM has yet been received.

        rMepFailed(3)          The timer has expired, both since the
                               state machine was reset, and since a
                               valid CCM was received.

        rMepOk(4)              The timer has not expired since a
                               valid CCM was received.
"
    REFERENCE
       "802.1ag clauses 12.14.7.6.3:b, 20.22"
    SYNTAX      INTEGER {
                  rMepIdle    (1),
                  rMepStart   (2),
                  rMepFailed  (3),
                  rMepOk      (4)
                }

Dot1afCfmIndexIntegerNextFree ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
      "An integer which may be used as a new Index in a table.

       The special value of 0 indicates that no more new entries can
       be created in the relevant table.

       When a MIB is used for configuration, an object with this
       SYNTAX always contains a legal value (if non-zero) for an
       index that is not currently used in the relevant table. The
       Command Generator (Network Management Application) reads this
       variable and uses the (non-zero) value read when creating a
       new row with an SNMP SET.  When the SET is performed, the
       Command Responder (agent) MUST determine whether the value is
       indeed still unused; Two Network Management Applications may
       attempt to create a row (configuration entry) simultaneously
       and use the same value. If it is currently unused, the SET
       succeeds and the Command Responder (agent) changes the value
       of this object, according to an implementation-specific
       algorithm.  If the value is in use, however, the SET fails.
       The Network Management Application MUST then re-read this
       variable to obtain a new usable value.

       An OBJECT-TYPE definition using this SYNTAX MUST specify the
       relevant table for which the object is providing this
       functionality.
      "
    SYNTAX      Unsigned32 (0..4294967295)

Dot1agCfmMepDefects ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A MEP can detect and report a number of defects, and multiple
        defects can be present at the same time. These defects are:

        bDefRDICCM(0) A remote MEP is reported the RDI bit in its
                     last CCM.
        bDefMACstatus(1) Either some remote MEP is reporting its
                     Interface Status TLV as not isUp, or all remote
                     MEPs are reporting a Port Status TLV that
                     contains some value other than psUp.
        bDefRemoteCCM(2) The MEP is not receiving valid CCMs from at
                     least one of the remote MEPs.
        bDefErrorCCM(3) The MEP has received at least one invalid CCM
                     whose CCM Interval has not yet timed out.
        bDefXconCCM(4) The MEP has received at least one CCM from
                     either another MAID or a lower MD Level whose
                     CCM Interval has not yet timed out.
       "
    REFERENCE
       "802.1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
        12.14.7.1.3:r, and 12.14.7.1.3:s."
    SYNTAX BITS {
                bDefRDICCM(0),
                bDefMACstatus(1),
                bDefRemoteCCM(2),
                bDefErrorCCM(3),
                bDefXconCCM(4)
               }

Dot1agCfmConfigErrors ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "While making the MIP creation evaluation described in 802.1ag
        clause 22.2.3, the management entity can encounter errors in
        the configuration. These are possible errors that can be
        encountered:

        CFMleak(0)   MA x is associated with a specific VID list,
                     one or more of the VIDs in MA x can pass through
                     the Bridge Port, no Down MEP is configured on
                     any Bridge Port for MA x, and some other MA y,
                     at a higher MD Level than MA x, and associated
                     with at least one of the VID(s) also in MA x,
                     does have a MEP configured on the Bridge Port.

        conflictingVids(1)  MA x is associated with a specific VID
                     list, an Up MEP is configured on MA x on the
                     Bridge Port, and some other MA y, associated
                     with at least one of the VID(s) also in MA x,
                     also has an Up MEP configured on some Bridge
                     Port.

        ExcessiveLevels(2)  The number of different MD Levels at
                     which MIPs are to be created on this port
                     exceeds the Bridge's capabilities (see
                     subclause 22.3).

        OverlappedLevels(3) A MEP is created for one VID at one MD
                     Level, but a MEP is configured on another
                     VID at that MD Level or higher, exceeding
                     the Bridge's capabilities.
       "
    REFERENCE
       "12.14.4.1.3:b and clauses 22.2.3 and 22.2.4"
    SYNTAX BITS {
                cfmLeak(0),
                conflictingVids(1),
                excessiveLevels(2),
                overlappedLevels(3)
                }

Dot1agCfmPbbComponentIdentifier
::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
       "A Provider Backbone Bridge (PBB) can comprise a number of
        components, each of which can be managed in a manner
        essentially equivalent to an 802.1Q bridge.  In order to access
        these components easily, an index is used in a number of
        tables.  If any two tables are indexed by
        Dot1agCfmPbbComponentIdentifier, then entries in those tables
        indexed by the same value of Dot1agCfmPbbComponentIdentifier
        correspond to the same component.
       "
    REFERENCE
       "12.3 l)"
    SYNTAX      Unsigned32 (1..4294967295)

          
Dot1agCfmAisDefectType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Kind of defect. It is reason why alram cuase."
   SYNTAX      INTEGER {
                  none       	(0),
                  all        	(1),
                  loc      	 	(2),
                  merge	    	(3),
                  unExpMep      (4),
                  unExpMegLvl	(5),
                  unExpPeriod	(6)
                }

          
          
-- *****************************************************************
-- ubiCFMMIB
-- *****************************************************************
ubiCFMMIBNotificationPrefix  	OBJECT IDENTIFIER		::= { ubiCFMMIB 0 }   
ubiCFMMIBObjects  				OBJECT IDENTIFIER		::= { ubiCFMMIB 1 }   
ubiCFMMIBConformance  			OBJECT IDENTIFIER		::= { ubiCFMMIB 2 }   
                 
                 
   
ubiCfmMd   	 				OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 1 }   
ubiCfmMa   	 				OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 2 }         
ubiCfmRmep    				OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 3 } 
ubiCfmMep    				OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 4 } 
ubiCfmServerMep    			OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 5 }        
ubiCfmNotificationEnables	OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 6 }  
ubiCfmTrack	  				OBJECT IDENTIFIER		::= { ubiCFMMIBObjects 7 }  
 
ubiCfmMepOamSend			OBJECT IDENTIFIER		::= { ubiCfmMep 4 }   		
ubiCfmMepOamResult			OBJECT IDENTIFIER		::= { ubiCfmMep 5 }

-- *****************************************************************
-- ubiCfmNotifications
-- *****************************************************************
ubiCfmNotifications  OBJECT IDENTIFIER				::= { ubiCFMMIBNotificationPrefix 0 }

	ubiCfmRemoteMepStatusChange NOTIFICATION-TYPE         
    	OBJECTS         { 
    					  ifIndex,        
    					  ubiCfmMdName,
    					  ubiCfmMaName, 
    					  ubiCfmMepId,    
    					  ubiCfmRmepId,
    					  ubiCfmRmepRemoteMacAddr,      
    					  ubiCfmRmepStatus,
     					 }
    	STATUS          current
    	DESCRIPTION    
    		"Remote MEP state(CC state) change Notification"
     	::= { ubiCfmNotifications 1 }
 
	ubiCfmAggPortRemoteMepStatusChange NOTIFICATION-TYPE         
    	OBJECTS         { 
    					  ubiAggId,    
    					  ifIndex,    
    					  ubiCfmMdName,
    					  ubiCfmMaName, 
    					  ubiCfmMepId,    
    					  ubiCfmRmepId,
    					  ubiCfmRmepRemoteMacAddr,      
    					  ubiCfmRmepStatus,
     					 }
    	STATUS          current
    	DESCRIPTION
      		"Notification that Remote MEP state(CC state) on port-gruop change"
   	::= { ubiCfmNotifications 2 }
 
	ubiCfmPmFrameDelayEvent NOTIFICATION-TYPE         
    	OBJECTS         {  
    					ubiCfmMepId,
    					ubiCfmMepIfname,        
    					--ubiCfmMepPmCurrentValue, 
    					ubiCfmMepPmDelayMin,
    					ubiCfmMepPmDelayMax,
    					ubiCfmMepPmDelayAvg,
        				ubiCfmMaPmDelayThreshold,    
    					ubiCfmMepPmDelayState,	
    	 }
    	STATUS          current
    	DESCRIPTION
        	"To generate notification when ubiCfmMepPmCurrentValue is bigger than 
        	ubiCfmMaPmDelayThreshold"
   	::= { ubiCfmNotifications 3 }

	ubiCfmPmFrameLossEvent NOTIFICATION-TYPE         
    	OBJECTS         {  
    					ubiCfmMepId,
    					ubiCfmMepIfname,      
    				--	ubiCfmMepPmCurrentValue,     
    					uniCfmMepPmLossNearEndTot,
    					uniCfmMepPmLossFarEndTot,
        				ubiCfmMaPmLossThreshold,     
     					ubiCfmMepPmLossState,
	   	 }
    	STATUS          current
    	DESCRIPTION
        	"To generate notification when ubiCfmMepPmCurrentValue is bigger than 
        	ubiCfmMaPmLossThreshold"
   	::= { ubiCfmNotifications 4 }
        


	ubiCfmMepEtherPingSendResult NOTIFICATION-TYPE         
    	OBJECTS         {  
    					ubiCfmMepOamSendBridgeId,
    					ubiCfmMepOamSendMdIndex,  
    					ubiCfmMepOamSendMaIndex,
    					ubiCfmMepOamSendMepId,
    					ubiCfmMepOamResultEtherPing,
    					ubiCfmMepOamResultEtherPingSndCount,
    					ubiCfmMepOamResultEtherPingRcvCount,
    					ubiCfmMepOamResultEtherPingRttMin,
    					ubiCfmMepOamResultEtherPingRttMax,
    					ubiCfmMepOamResultEtherPingRttAvg
    	}
    	STATUS          current
    	DESCRIPTION
        	"Indicates the result of the operation:

       		 - ok       The Loopback Message(s)reply received
          	 - fail     The Loopback Message(s)reply don't recieved
      		 - already active   Another LBM is being transmitted 
      		 - Not ready 	Do not initator state machine for LBM sending    		"

   	::= { ubiCfmNotifications 5 }
        
	ubiCfmMepLinkTraceSendResult NOTIFICATION-TYPE         
    	OBJECTS         {           
    					ubiCfmMepOamSendBridgeId,
    					ubiCfmMepOamSendMdIndex,
    					ubiCfmMepOamSendMaIndex,
    					ubiCfmMepOamSendMepId,
						ubiCfmMepOamResultLinkTraceSrcMacAddr,
						ubiCfmMepOamResultLinkTraceRcvIfIndex,
						ubiCfmMepOamResultLinkTraceRelayAction,
						ubiCfmMepOamResultLinkTraceHopCount
	   	 }
    	STATUS          current
    	DESCRIPTION
        	"A LTR information about LTMs transmitted"
   	::= { ubiCfmNotifications 6 }
   	
   	ubiCfmCCConfigDefectAlarm NOTIFICATION-TYPE         
    	OBJECTS         {           
    					ubiBridgeId,
    					ubiCfmMdName,
    					ubiCfmMaName,
    					ubiCfmMepId,
    					ubiCfmMepCCConfigDefect,
    					ubiCfmMepCCConfigDefectState
	   	 }
    	STATUS          current
    	DESCRIPTION
        	"The CCM defect about Config error"
   	::= { ubiCfmNotifications 7 }
        
        
           
-- *****************************************************************
-- ubiCfmMdTable
-- *****************************************************************          

	ubiCfmMdTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMdEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The Maintenance Domain table. Each row in the table
        	represents a different Maintenance Domain.

        	A Maintenance Domain is described in 802.1ag (3.22) as the
        	network or the part of the network for which faults in
        	connectivity are to be managed. The boundary of a Maintenance
        	Domain is defined by a set of DSAPs, each of which can become
        	a point of connectivity to a service instance"
    	::= { ubiCfmMd 1 }

  	ubiCfmMdEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMdEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current    
    	DESCRIPTION
        	"The Maintenance Domain table entry. 
        	INDEX { ubiBridgeId, ubiCfmMdIndex }"
    	INDEX           { ubiBridgeId, ubiCfmMdIndex }         	
    	::= { ubiCfmMdTable 1 }
  	
  	UbiCfmMdEntry ::= SEQUENCE {        
	       	ubiCfmMdIndex				Unsigned32, 
        	ubiCfmMdName				Dot1agCfmMaintDomainName, 
        	ubiCfmMdNameType			Dot1agCfmMaintDomainNameType2, 
        	ubiCfmMdLevel			   	Dot1agCfmMDLevel, 
	       	ubiCfmMdMipCreation			Dot1agCfmMhfCreation,
        	ubiCfmMdRowStatus       	RowStatus           
        }

  	ubiCfmMdIndex OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The index to the Maintenance Domain table." 
    	::= { ubiCfmMdEntry 1 }

	ubiCfmMdName OBJECT-TYPE
    	SYNTAX      Dot1agCfmMaintDomainName
    	MAX-ACCESS  read-create
   	 	STATUS      current
    	DESCRIPTION
      	 	"The Maintenance Domain name.       		
      	 	Each Maintenance Domain has unique name amongst all those
        	used or available to a service provider or operator.  It
        	facilitates easy identification of administrative
        	responsibility for each Maintenance Domain."
    	::= { ubiCfmMdEntry 2 }
  
	ubiCfmMdNameType OBJECT-TYPE
    	SYNTAX      Dot1agCfmMaintDomainNameType2
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The type (and thereby format) of the Maintenance Domain Name.
       		There are two types. IEEE802.1ag type(string, address...etc)
       		and ITU-T Y.1731 type (itu-t)"
        ::= { ubiCfmMdEntry 3 }
  
	ubiCfmMdLevel OBJECT-TYPE
  		SYNTAX      Dot1agCfmMDLevel
		MAX-ACCESS  read-create
  	  	STATUS      current
    	DESCRIPTION
       		"The Maintenance Domain Level. (0 ~ 7 level)"
    	::= { ubiCfmMdEntry 4 }
                            
	ubiCfmMdMipCreation OBJECT-TYPE
    	SYNTAX      Dot1agCfmMhfCreation {
                  defMHFnone     (1),
                  defMHFdefault  (2),
                  defMHFexplicit (3)              
                }
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"Enumerated value indicating whether the management entity can
        	create MHFs (MIP Half Function) for this Maintenance Domain.
        	Since, in this variable, there is no encompassing Maintenance
        	Domain, the value defMHFdefer is not allowed."
    	::= { ubiCfmMdEntry 5 }
                             
	ubiCfmMdRowStatus OBJECT-TYPE
    	SYNTAX      RowStatus
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The status of the row."
    	::= { ubiCfmMdEntry 6 }
 
 
-- *****************************************************************
-- ubiCfmDefaultMdTable
-- *****************************************************************          

	ubiCfmDefaultMdTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmDefaultMdEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
	       "For each bridge component, the Default MD Level Managed Object
	        controls MHF creation for VIDs that are not attached to a
	        specific Maintenance Association Managed Object, and Sender ID
	        TLV transmission by those MHFs.
	
	        For each Bridge Port, and for each VLAN ID whose data can
	        pass through that Bridge Port, an entry in this table is
	        used by the algorithm in subclause 22.2.3 only if there is no
	        entry in the Maintenance Association table defining an MA
	        for the same VLAN ID and MD Level as this table's entry, and
	        on which MA an Up MEP is defined.  If there exists such an
	        MA, that MA's objects are used by the algorithm in
	        subclause 22.2.3 in place of this table entry's objects.  The
	        agent maintains the value of ubiCfmDefaultMdRowStatus to
	        indicate whether this entry is overridden by an MA.
	
	        When first initialized, the agent creates this table
	        automatically with entries for all VLAN IDs,
	        with the default values specified for each object."
    	::= { ubiCfmMd 2 }

  	ubiCfmDefaultMdEntry OBJECT-TYPE
    	SYNTAX          UbiCfmDefaultMdEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The Default MD Level table entry."
    	INDEX           { UbiBridgeId, ubiCfmDefaultMdVlanId } 
    	::= { ubiCfmDefaultMdTable 1 }

  	
  	UbiCfmDefaultMdEntry ::= SEQUENCE {        
	       	ubiCfmDefaultMdVlanId			VlanIndex, 
        	ubiCfmDefaultMdLevel			Dot1agCfmMDLevel, 
        	ubiCfmDefaultMdMipCreation		Dot1agCfmMhfCreation, 
	       	ubiCfmDefaultMdRowStatus       	RowStatus           
        }

  	ubiCfmDefaultMdVlanId OBJECT-TYPE
    	SYNTAX          VlanIndex
   		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The Primary VID of the VLAN to which this entry's objects
        	apply." 
    	::= { ubiCfmDefaultMdEntry 1 }

	ubiCfmDefaultMdLevel OBJECT-TYPE
    	SYNTAX      Dot1agCfmMDLevel
    	MAX-ACCESS  read-create
   	 	STATUS      current
    	DESCRIPTION
      	 	"A value indicating the MD Level at which MHFs are to be
	        created, and Sender ID TLV transmission by those MHFs is to
	        be controlled, for the VLAN to which this entry's objects
	        apply.  If this object has the value -1, the MD Level for MHF
	        creation for this VLAN is controlled by
	        ubiCfmDefaultMdLevel."
    	::= { ubiCfmDefaultMdEntry 2 }
                              
	ubiCfmDefaultMdMipCreation OBJECT-TYPE
    	SYNTAX      Dot1agCfmMhfCreation {
                  defMHFnone     (1),
                  defMHFdefault  (2),
                  defMHFexplicit (3),   
                  defMHFdefer(4)                 
                }
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		 "A value indicating if the Management entity can create MHFs
	        (MIP Half Function) for this VID at this MD Level.  If this
	        object has the value defMHFdefer, MHF creation for this VLAN
	        is controlled by dot1agCfmDefaultMdDefMhfCreation.
	
	        The value of this variable is meaningless if the values of
	        ubiCfmDefaultMdMipCreation is false."
    	::= { ubiCfmDefaultMdEntry 3 }
                             
	ubiCfmDefaultMdRowStatus OBJECT-TYPE
    	SYNTAX      RowStatus
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The status of the row."
    	::= { ubiCfmDefaultMdEntry 4 }
         

-- *****************************************************************
-- ubiCfmMaTable
-- *****************************************************************          

	ubiCfmMaTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMaEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The Maintenance Association table.  Each row in the table
	        represents an MA.  An MA is a set of MEPs, each configured
	        with a single service instance."
    	::= { ubiCfmMa 1 }

  	ubiCfmMaEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMaEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The MA table entry."
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex } 
    	::= { ubiCfmMaTable 1 }

  	
  	UbiCfmMaEntry ::= SEQUENCE {        
	       	ubiCfmMaIndex				Unsigned32, 
        	ubiCfmMaName				Dot1agCfmMaintAssocName, 
        	ubiCfmMaNameType			Dot1agCfmMaintAssocNameType, 
        	ubiCfmMaVlanId				VlanIndex,       
        	ubiCfmMaMipCreation			Dot1agCfmMhfCreation,
        	ubiCfmMaRowStatus       	RowStatus           
        }

  	ubiCfmMaIndex OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The index to the Maintenance Association table." 
    	::= { ubiCfmMaEntry 1 }

	ubiCfmMaName OBJECT-TYPE
    	SYNTAX      Dot1agCfmMaintAssocName
    	MAX-ACCESS  read-create
   	 	STATUS      current
    	DESCRIPTION
      	 	"The Short Maintenance Association name. This name MUST be unique within
        	a maintenance domain."
    	::= { ubiCfmMaEntry 2 }
  
	ubiCfmMaNameType OBJECT-TYPE
    	SYNTAX      Dot1agCfmMaintAssocNameType
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The type (and thereby format) of the Maintenance Association Name."
        ::= { ubiCfmMaEntry 3 }
 
   	ubiCfmMaVlanId OBJECT-TYPE
    	SYNTAX          VlanIndex
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The Primary VLAN ID with which the Maintenance Association is
        	associated, or 0 if the MA is not attached to any VID. " 
    	::= { ubiCfmMaEntry 4 } 
                            
	ubiCfmMaMipCreation OBJECT-TYPE
    	SYNTAX      Dot1agCfmMhfCreation {
                  defMHFnone     (1),
                  defMHFdefault  (2),
                  defMHFexplicit (3),
                  defMHFdefer(4)
                }
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"Indicates if the Management entity can create MHFs (MIP Half
        	Function) for this MA."
    	::= { ubiCfmMaEntry 5 }
                             
  	ubiCfmMaRowStatus OBJECT-TYPE
    	SYNTAX      RowStatus
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The status of the row."
    	::= { ubiCfmMaEntry 6 }

-- *****************************************************************
-- ubiCfmMaTable
-- *****************************************************************          

	ubiCfmMaAttrTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMaAttrEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An Attribute table for each MA(Maintenance Association).
        	Such as, CCM transmission interval."
    	::= { ubiCfmMa 2 }

  	ubiCfmMaAttrEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMaAttrEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An attribute entry"
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex } 
    	::= { ubiCfmMaAttrTable 1 }

  	UbiCfmMaAttrEntry ::= SEQUENCE {        
	       	ubiCfmMaAttrCCInterval			Integer32        
    }

  	ubiCfmMaAttrCCInterval OBJECT-TYPE
    	SYNTAX          Integer32 
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Interval between CCM transmissions to be used by all MEPs
        	in the MA. 
		        interval3ms(1)     CCMs are sent every 3 1/3 milliseconds.
		        interval10ms(2)    CCMs are sent every 10 milliseconds.
		        interval100ms(3)   CCMs are sent every 100 milliseconds.
		        interval1s(4)      CCMs are sent every 1 second.
		        interval10s(5)     CCMs are sent every 10 seconds.
		        interval1min(6)    CCMs are sent every minute.
		        interval10min(7)   CCMs are sent every 10 minutes."
 
    	::= { ubiCfmMaAttrEntry 1 }     
  

-- *****************************************************************
-- ubiCfmMaPmTable
-- *****************************************************************          

	ubiCfmMaPmTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMaPmEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An attribute for Performance Monitoring"
    	::= { ubiCfmMa 3 }

  	ubiCfmMaPmEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMaPmEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Performance Monitoring Entry"

    	INDEX           { ubiBridgeId, ubiCfmMdIndex, ubiCfmMaIndex } 
    	::= { ubiCfmMaPmTable 1 }

  	UbiCfmMaPmEntry ::= SEQUENCE {         
        	ubiCfmMaPmDelayInterval			Integer32,  
        	ubiCfmMaPmLossInterval			Integer32,
        	ubiCfmMaPmDelayThreshold		Integer32,   
        	ubiCfmMaPmLossThreshold			Integer32,  
    }

   	ubiCfmMaPmDelayInterval OBJECT-TYPE
    	SYNTAX          Integer32 
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Interval to trasmit DM(delay measurement)message" 
    	::= { ubiCfmMaPmEntry 1 }   
     	
  	ubiCfmMaPmLossInterval OBJECT-TYPE
    	SYNTAX          Integer32 
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Interval to trasmit LM(loss measurement)message" 

    	::= { ubiCfmMaPmEntry 2 }   
 
  	ubiCfmMaPmDelayThreshold OBJECT-TYPE
    	SYNTAX          Integer32 
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Treshold to limit for delay" 
    	::= { ubiCfmMaPmEntry 3 }           
  
 
  	ubiCfmMaPmLossThreshold OBJECT-TYPE
    	SYNTAX          Integer32 
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Treshold to limit for loss" 
       ::= { ubiCfmMaPmEntry 4 }   

              
-- *****************************************************************
-- ubiCfmRmepTable
-- *****************************************************************          

	ubiCfmRmepTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmRmepEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Information of Remote Mep table"
    	::= { ubiCfmRmep 1 }

  	ubiCfmRmepEntry OBJECT-TYPE
    	SYNTAX          UbiCfmRmepEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Information of Remote Mep entry"
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, ubiCfmRmepId } 
    	::= { ubiCfmRmepTable 1 }

  	
  	UbiCfmRmepEntry ::= SEQUENCE {        
	       	ubiCfmRmepId					Dot1agCfmMepId, 
        --	ubiCfmRmepMdLevel				Dot1agCfmMDLevel, 
        	ubiCfmRmepVlanId				VlanIndex, 
        	ubiCfmRmepRemoteMacAddr			MacAddress,   
         	ubiCfmRmepCrossCheckType		INTEGER,           	     
        	ubiCfmRmepStatus				INTEGER,
        	ubiCfmRmepRowStatus       		RowStatus,     
        }
  
  	ubiCfmRmepId OBJECT-TYPE
    	SYNTAX          Dot1agCfmMepId
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Maintenance association End Point Identifier of a remote MEP"

    	::= { ubiCfmRmepEntry 1 }

--	ubiCfmRmepMdLevel OBJECT-TYPE
--    	SYNTAX      Dot1agCfmMDLevel
--    	MAX-ACCESS  read-write
--   	 	STATUS      current
--    	DESCRIPTION
--      	 	""
--    	::= { ubiCfmRmepEntry 2 }
  
	ubiCfmRmepVlanId OBJECT-TYPE
    	SYNTAX      VlanIndex
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"VLAN Identifier of a remote MEP. Same value of local MEP(MA's VID)"
        ::= { ubiCfmRmepEntry 2 }
 
   	ubiCfmRmepRemoteMacAddr OBJECT-TYPE
    	SYNTAX          MacAddress
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"The MAC address of the remote MEP." 
    	::= { ubiCfmRmepEntry 3 }            
 
   	ubiCfmRmepCrossCheckType OBJECT-TYPE
    	SYNTAX      INTEGER {
    	 	unicast(1),
    	 	multicast(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"CrossCheck Type (uicast or multicast)." 
    	::= { ubiCfmRmepEntry 4 }     	
                            
	ubiCfmRmepStatus OBJECT-TYPE
    	SYNTAX      INTEGER {
    	 	connect(1),
    	 	disconnect(2)
    	}
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"Continuity Status to local MEP from remote MEP.
       		Remote MEP state machine last entered either the RMEP_FAILED 
       		or RMEP_OK state"
    	::= { ubiCfmRmepEntry 5 }
                             
  	ubiCfmRmepRowStatus OBJECT-TYPE
    	SYNTAX      RowStatus
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The status of the row."
    	::= { ubiCfmRmepEntry 6 }       
                                      
-- *****************************************************************
-- ubiCfmMepTable
-- *****************************************************************          

	ubiCfmMepTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMepEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The Maintenance Association End Point (MEP) table."
    	::= { ubiCfmMep 1 }

  	ubiCfmMepEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMepEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The known MEPS table entry."
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, 
    					  ubiCfmMaIndex, ubiCfmMepId, ifIndex } 
    	::= { ubiCfmMepTable 1 }

  	
  	UbiCfmMepEntry ::= SEQUENCE {        
	       	ubiCfmMepId						Dot1agCfmMepId, 
        	ubiCfmMepMdLevel				Dot1agCfmMDLevel,   
          	ubiCfmMepVlanId					VlanIndex,          
          	ubiCfmMepActive					TruthValue,
        	ubiCfmMepDirection				INTEGER,
           	ubiCfmMepMdName					Dot1agCfmMaintDomainName,
      		ubiCfmMepUniMep					INTEGER,
      		ubiCfmMepRmepId					Dot1agCfmMepId,          			
  			ubiCfmMepIfname					DisplayString,				
   			ubiCfmMepIfMacAddr				MacAddress,						
   			ubiCfmMepRdi					TruthValue,
   			ubiCfmMepCCType					INTEGER,      
   			ubiCfmMepCCEnable				INTEGER,
        	ubiCfmMepRowStatus       		RowStatus,
        	ubiCfmMepMissingTime			Integer32,
        	ubiCfmMepExpiredTime			Integer32,
        	ubiCfmMepForceEgressTag			INTEGER				           
        }

  	ubiCfmMepId OBJECT-TYPE
    	SYNTAX          Dot1agCfmMepId
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Integer that is unique among all the MEPs in the same MA.
	        Other definition is: 
	        A small integer, unique over a given
	        Maintenance Association, identifying a specific Maintenance
	        association End Point (3.19).
	
	        MEP Identifier is also known as the MEPID." 
    	::= { ubiCfmMepEntry 1 }

	ubiCfmMepMdLevel OBJECT-TYPE
    	SYNTAX      Dot1agCfmMDLevel
    	MAX-ACCESS  read-write
   	 	STATUS      current
    	DESCRIPTION
      	 	"MD level that belong to this MD"
    	::= { ubiCfmMepEntry 2 }
  
	ubiCfmMepVlanId OBJECT-TYPE
    	SYNTAX      VlanIndex
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"An integer indicating the Primary VID of the MEP, always
        	one of the VIDs assigned to the MEP's MA.  The value 0
	        indicates that either the Primary VID is that of the
	        MEP's MA, or that the MEP's MA is associated with no VID."
        ::= { ubiCfmMepEntry 3 }
   
  	ubiCfmMepActive OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
			 "Administrative state of the MEP. A Boolean indicating the 
			 administrative state of the MEP.
	         True indicates that the MEP is to function normally, and
	         false that it is to cease functioning." 
    	::= { ubiCfmMepEntry 4 } 
   
   
   	ubiCfmMepDirection OBJECT-TYPE
    	SYNTAX          INTEGER {
    	 		down(1),
    	 		up(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"The direction in which the MEP faces on the Bridge port." 
    	::= { ubiCfmMepEntry 5 } 

	ubiCfmMepMdName OBJECT-TYPE
    	SYNTAX      Dot1agCfmMaintDomainName
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"MD name that belong to this MD"
    	::= { ubiCfmMepEntry 6 }           
    	
  	ubiCfmMepUniMep OBJECT-TYPE
    	SYNTAX      INTEGER {
    	 		enable(1),
    	 		disable(2)
    	}
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"The flag to configure UNI-MEP"
    	::= { ubiCfmMepEntry 7 }
  
 
  	ubiCfmMepRmepId OBJECT-TYPE
    	SYNTAX          Dot1agCfmMepId
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"The specified RmepID that is RMEP configured" 
    	::= { ubiCfmMepEntry 8 } 
  	
	ubiCfmMepIfname OBJECT-TYPE
    	SYNTAX      DisplayString
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"This object is the IfIndex of the interface 
       		where MEP configure."
    	::= { ubiCfmMepEntry 9 }  
    	
	ubiCfmMepIfMacAddr OBJECT-TYPE
    	SYNTAX      MacAddress
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"Thsi object is the MAC address of the interface 
       		where MEP configure."

    	::= { ubiCfmMepEntry 10 }

	ubiCfmMepRdi OBJECT-TYPE
    	SYNTAX      TruthValue
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"State of the RDI bit in the sending CCM (true for
        	RDI=1), or false."
    	::= { ubiCfmMepEntry 11 }
 
	ubiCfmMepCCType OBJECT-TYPE
    	SYNTAX      INTEGER {
    		unicast(1),
    		multicast(2)
    	}
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"The type of CCM message."
    	::= { ubiCfmMepEntry 12 }      
    	
  	ubiCfmMepCCEnable OBJECT-TYPE
    	SYNTAX      INTEGER {
    		enable(1),
    		disable(2),
    		passive(3)
    	}
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"If set to true, the MEP will generate CCM messages."

    	::= { ubiCfmMepEntry 13 }  	
 
   	ubiCfmMepRowStatus OBJECT-TYPE
    	SYNTAX      RowStatus
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The status of the row."
    	::= { ubiCfmMepEntry 14 }
 
   	ubiCfmMepMissingTime OBJECT-TYPE
    	SYNTAX      Integer32
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"The pass time after received last CCM"
    	::= { ubiCfmMepEntry 15 }

   	ubiCfmMepExpiredTime OBJECT-TYPE
    	SYNTAX      Integer32
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"The remain time till Expired RMEP status"
    	::= { ubiCfmMepEntry 16 }
    	
   	ubiCfmMepForceEgressTag OBJECT-TYPE
    	SYNTAX      INTEGER {
    	    egress-default(0),
    		egress-tagged(1),
    		egress-untagged(2)
    	}
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"UNI-MEP send CCM with VID information(tagged) 
       		or send CCM without VID information (untagged).
       		If set none-value, tag information is depend on
       		egress interface policy"
    	::= { ubiCfmMepEntry 17 }

  
 
-- *****************************************************************
-- ubiCfmMepPmDelayTable
-- *****************************************************************          

	ubiCfmMepPmDelayTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMepPmDelayEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Performance Monitoring Table"
    	::= { ubiCfmMep 2 }

  	ubiCfmMepPmDelayEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMepPmDelayEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Performance Monitoring Entry"
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, 
    					  ubiCfmMaIndex, ubiCfmMepId, ifIndex } 
    	::= { ubiCfmMepPmDelayTable 1 }

  	
  	UbiCfmMepPmDelayEntry ::= SEQUENCE {    
	       	ubiCfmMepPmDelayRmep			INTEGER, 
        	ubiCfmMepPmDelayFrameType		INTEGER,    
        	ubiCfmMepPmDelayCurrentValue	Unsigned32,
          	ubiCfmMepPmDelayTxInterval		INTEGER,   
          	ubiCfmMepPmDelayState			INTEGER,         
          	ubiCfmMepPmDelayRowStatus		RowStatus,
          	ubiCfmMepPmDelayMin				Integer32,
           	ubiCfmMepPmDelayMax				Integer32,
          	ubiCfmMepPmDelayAvg				Integer32        	  
     }

  	ubiCfmMepPmDelayRmep OBJECT-TYPE
    	SYNTAX          INTEGER
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Remote MEP ID to measure performance " 
    	::= { ubiCfmMepPmDelayEntry 1 }

  	ubiCfmMepPmDelayFrameType OBJECT-TYPE
    	SYNTAX          INTEGER {        
    		unicast(1),
    		multicast(2)
    	}
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The type of frame that is to measure" 
    	::= { ubiCfmMepPmDelayEntry 2 }       
    	
  	ubiCfmMepPmDelayCurrentValue OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      read-only
    	STATUS          deprecated
    	DESCRIPTION
        	"Result value of measurement"   
    	::= { ubiCfmMepPmDelayEntry 3 }                        
               
  	ubiCfmMepPmDelayTxInterval OBJECT-TYPE
    	SYNTAX          INTEGER {     
    		tx_100m(1),
    		tx_1s(2),
    		tx_10s(3)
    	}
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Period that operate performance monitoring" 
    	::= { ubiCfmMepPmDelayEntry 4 }

  	ubiCfmMepPmDelayState OBJECT-TYPE
    	SYNTAX          INTEGER {     
	        ok(1),
			fail(2)			
	    }
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Result state of measurement.
        	If ubiCfmMepPmCurrentValue is lower than threshold, 
        	ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is 
        	over the configured threshold, ubiCfmMepPmState is FAIL." 
    	::= { ubiCfmMepPmDelayEntry 5 }


  	ubiCfmMepPmDelayRowStatus OBJECT-TYPE
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The status of the row." 
    	::= { ubiCfmMepPmDelayEntry 6 }
          
  	ubiCfmMepPmDelayMin OBJECT-TYPE
    	SYNTAX          Integer32       
    	UNITS			"milliseconds"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Minimum delay measured by performance monitoring" 
    	::= { ubiCfmMepPmDelayEntry 7 }
          
  	ubiCfmMepPmDelayMax OBJECT-TYPE
    	SYNTAX          Integer32       
    	UNITS			"milliseconds"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Maximum delay measured by performance monitoring" 
    	::= { ubiCfmMepPmDelayEntry 8 }

  	ubiCfmMepPmDelayAvg OBJECT-TYPE
    	SYNTAX          Integer32       
    	UNITS			"milliseconds"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Average of delay measured by performance monitoring" 
    	::= { ubiCfmMepPmDelayEntry 9 }


  
-- *****************************************************************
-- ubiCfmMepPmLossTable
-- *****************************************************************          

	ubiCfmMepPmLossTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmMepPmLossEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Performance Monitoring Table"
    	::= { ubiCfmMep 3 }

  	ubiCfmMepPmLossEntry OBJECT-TYPE
    	SYNTAX          UbiCfmMepPmLossEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Performance Monitoring Entry"
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, 
    					  ubiCfmMaIndex, ubiCfmMepId, ifIndex } 
    	::= { ubiCfmMepPmLossTable 1 }

  	
  	UbiCfmMepPmLossEntry ::= SEQUENCE {    
	       	ubiCfmMepPmLossRmep					INTEGER, 
        	ubiCfmMepPmLossFrameType			INTEGER,    
        	ubiCfmMepPmLossCurrentValue			Unsigned32,
          	ubiCfmMepPmLossTxInterval			INTEGER,   
          	ubiCfmMepPmLossState				INTEGER,         
          	ubiCfmMepPmLossRowStatus			RowStatus,
          	ubiCfmMepPmLossRttMin				Integer32,
           	ubiCfmMepPmLossRttMax				Integer32,
          	ubiCfmMepPmLossRttAvg				Integer32,      
           	uniCfmMepPmLossNearEndTot			Integer32,
          	uniCfmMepPmLossFarEndTot			Integer32,
        }


  	ubiCfmMepPmLossRmep OBJECT-TYPE
    	SYNTAX          INTEGER
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Remote MEP ID to measure performance " 
    	::= { ubiCfmMepPmLossEntry 1 }

  	ubiCfmMepPmLossFrameType OBJECT-TYPE
    	SYNTAX          INTEGER {        
    		unicast(1),
    		multicast(2)
    	}
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The type of frame that is to measure" 
    	::= { ubiCfmMepPmLossEntry 2 }       
    	
  	ubiCfmMepPmLossCurrentValue OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      read-only
    	STATUS          deprecated
    	DESCRIPTION
        	"Result value of measurement"   
    	::= { ubiCfmMepPmLossEntry 3 }                        
               
  	ubiCfmMepPmLossTxInterval OBJECT-TYPE
    	SYNTAX          INTEGER {     
    		tx_100m(1),
    		tx_1s(2),
    		tx_10s(3)
    	}
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Period that operate performance monitoring" 
    	::= { ubiCfmMepPmLossEntry 4 }

  	ubiCfmMepPmLossState OBJECT-TYPE
    	SYNTAX          INTEGER {     
	        ok(1),
			fail(2)			
	    }
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Result state of measurement.
        	If ubiCfmMepPmCurrentValue is lower than threshold, 
        	ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is 
        	over the configured threshold, ubiCfmMepPmState is FAIL." 
    	::= { ubiCfmMepPmLossEntry 5 }


  	ubiCfmMepPmLossRowStatus OBJECT-TYPE
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"The status of the row." 
    	::= { ubiCfmMepPmLossEntry 6 }
          
 
  	uniCfmMepPmLossNearEndTot OBJECT-TYPE
    	SYNTAX          Integer32       
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Frame loss of near end measured by performance monitoring" 
    	::= { ubiCfmMepPmLossEntry 7 }

  	uniCfmMepPmLossFarEndTot OBJECT-TYPE
    	SYNTAX          Integer32       
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Frame loss of far end measured by performance monitoring" 
    	::= { ubiCfmMepPmLossEntry 8 }
          

 	ubiCfmMepPmLossRttMin OBJECT-TYPE
    	SYNTAX          Integer32       
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Minimum route-trip time between MEPs" 
    	::= { ubiCfmMepPmLossEntry 9 }
          
  	ubiCfmMepPmLossRttMax OBJECT-TYPE
    	SYNTAX          Integer32       
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Maximum route-trip time between MEPs" 
    	::= { ubiCfmMepPmLossEntry 10 }

  	ubiCfmMepPmLossRttAvg OBJECT-TYPE
    	SYNTAX          Integer32       
	   	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Average of route-trip time between MEPs" 
    	::= { ubiCfmMepPmLossEntry 11 }


  
-- *****************************************************************
-- ubiCfmMep Ping/Trace Send
-- *****************************************************************          

  	ubiCfmMepOamSendBridgeId OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Bridge ID to send Ping or Linktrace" 
    	::= { ubiCfmMepOamSend 1 }

  	ubiCfmMepOamSendMdIndex OBJECT-TYPE
    	SYNTAX          Unsigned32    
       	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Maintenance Domain ID to send Ping or Linktrace" 
    	::= { ubiCfmMepOamSend 2 }       
    	
  	ubiCfmMepOamSendMaIndex OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Maintenance Association ID to send Ping or Linktrace"   
    	::= { ubiCfmMepOamSend 3 } 
               
  	ubiCfmMepOamSendMepId OBJECT-TYPE
    	SYNTAX          Unsigned32
     	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"MEP ID to send Ping or Linktrace" 
    	::= { ubiCfmMepOamSend 4 }

  	ubiCfmMepOamSendDstMac OBJECT-TYPE
    	SYNTAX          MacAddress
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Destination MAC address" 
    	::= { ubiCfmMepOamSend 5 }
 
   	ubiCfmMepOamSendLoopbackFrameType OBJECT-TYPE
    	SYNTAX          INTEGER  {   
    			none(0),           
    			unicast(1),
    			multicast(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Type of CFM loopback Frame (ETH-LB)" 
    	::= { ubiCfmMepOamSend 6 }

   	ubiCfmMepOamSendLoopbackFrameCount OBJECT-TYPE
    	SYNTAX          Counter32
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Counter to transmit CFM loopback frame" 
    	::= { ubiCfmMepOamSend 7 }

  	ubiCfmMepOamSendExecute OBJECT-TYPE
    	SYNTAX      INTEGER	
    	{
    		none(0),
    		etherPing(1),
    		linkTrace(2)
      	}
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
       		"Send ping/linktrace messages"
    	::= { ubiCfmMepOamSend 8 }           	

-- *****************************************************************
-- ubiCfmMep Ping/Trace Send  Result
-- *****************************************************************    
 	ubiCfmMepOamResultEtherPing OBJECT-TYPE
    	SYNTAX      INTEGER {       
    		other(0),    
    		ok(1),
    		fail(2),
    		already_activated(3),
    		not_ready(4)
    	}	
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"The result of Loopback message sent.
       		If already Loopback function activate, send trap
       		result value on already_activated. if CC not connected or
       		unicast RMEP crosscheck type, send trap result value on not_ready."  
       		
    	::= { ubiCfmMepOamResult 1 }            
    	
 	ubiCfmMepOamResultEtherPingSndCount OBJECT-TYPE
    	SYNTAX      Counter32
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"Counter of CFM loopback frame to send"  
    	::= { ubiCfmMepOamResult 2 }    

 	ubiCfmMepOamResultEtherPingRcvCount OBJECT-TYPE
    	SYNTAX      Counter32
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"Received counter of CFM lopback reply"  
    	::= { ubiCfmMepOamResult 3 }   

 	ubiCfmMepOamResultEtherPingRttMin OBJECT-TYPE
    	SYNTAX      Integer32
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"Minimum round-trip time measured by CFM loopback frame"  
    	::= { ubiCfmMepOamResult 4 }    

 	ubiCfmMepOamResultEtherPingRttMax OBJECT-TYPE
    	SYNTAX      Integer32
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"Maximum round-trip time measured by CFM loopback frame"  
    	::= { ubiCfmMepOamResult 5 }   

 	ubiCfmMepOamResultEtherPingRttAvg OBJECT-TYPE
    	SYNTAX      Integer32
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"Average of round-trip time measured by CFM loopback frame"  
    	::= { ubiCfmMepOamResult 6 }  
                                     
 	ubiCfmMepOamResultLinkTraceSrcMacAddr OBJECT-TYPE
    	SYNTAX      MacAddress	
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"MAC address returned in the ingress MAC address field."
    	::= { ubiCfmMepOamResult 7 }                                        


 	ubiCfmMepOamResultLinkTraceRcvIfIndex OBJECT-TYPE
    	SYNTAX      Integer32	
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"The index of local interface of received LTR"   
       	::= { ubiCfmMepOamResult 8 }                                        
                                      
 	ubiCfmMepOamResultLinkTraceRelayAction OBJECT-TYPE
    	SYNTAX      INTEGER { 
    		other(0),
    		relay_hit(1),
    		relay_fdb(2),
    		already_activated(3),
    		not_ready(4)
    	}	
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"Indicates if a LTM was forwarded by the responding MP, as
        	returned in the 'relay-hit' or 'relay-fdb' flag of the 
        	flags field. If other LT function already activate, 
        	on already_activated value. else if CC is not OK state, 
        	on not_ready value"
   
       	::= { ubiCfmMepOamResult 9 }            


 	ubiCfmMepOamResultLinkTraceHopCount OBJECT-TYPE
    	SYNTAX      Integer32
    	MAX-ACCESS  accessible-for-notify
    	STATUS      current
    	DESCRIPTION
       		"hop count for a returned LTR."   
       	::= { ubiCfmMepOamResult 10 }                              

-- *****************************************************************
-- ubiCfmCCConfigDefectTable
-- *****************************************************************  

	ubiCfmCCConfigDefectTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmCCConfigDefectEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The CCM config defect table"
    	::= { ubiCfmMep 6 }

  	ubiCfmCCConfigDefectEntry OBJECT-TYPE
    	SYNTAX          UbiCfmCCConfigDefectEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The CCM config defect entry"
    	INDEX           { ubiBridgeId, ubiCfmMdIndex, 
    					  ubiCfmMaIndex, ubiCfmMepId, ifIndex } 
    	::= { ubiCfmCCConfigDefectTable 1 }
    	
  	UbiCfmCCConfigDefectEntry ::= SEQUENCE {
  	          	ubiCfmMepCCConfigDefect				INTEGER,
  	          	ubiCfmMepCCConfigDefectState		INTEGER
  	    }
  	
 	ubiCfmMepCCConfigDefect OBJECT-TYPE
    	SYNTAX      INTEGER{ 
    		none(0),
    		unexpected_mep_id(1),
    		unexpected_tx_interval(2),
    		existed_mep_id (3)

    	}	
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"Number of Defect
       		 0: None
       		 1: Unexpected MEP ID
       		 2: Unexpected Tx interval
       		 3: Already Existed MEP"   
       	::= { ubiCfmCCConfigDefectEntry 1 }
       	
    
    ubiCfmMepCCConfigDefectState OBJECT-TYPE
    	SYNTAX      INTEGER{
    		defectcondition_exit(0),
    		defectcondition_entry(1)
    	}    	
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"State of defect condition
       		 0: DefectConditionExit
       		 1: DefectConditionEntry"   
       	::= { ubiCfmCCConfigDefectEntry 2 }
  	
    
-- *****************************************************************
-- ubiCfmAisTable
-- *****************************************************************          

--	ubiCfmAisTable OBJECT-TYPE
--		SYNTAX          SEQUENCE OF UbiCfmAisEntry
--		MAX-ACCESS      not-accessible
--    	STATUS          current
--    	DESCRIPTION
--        	""
--    	::= { ubiCfmAis 1 }

-- 	ubiCfmAisEntry OBJECT-TYPE
--    	SYNTAX          UbiCfmAisEntry
--    	MAX-ACCESS      not-accessible
--    	STATUS          current
--    	DESCRIPTION
--        	""
--    	INDEX           { ubiBridgeId, ifIndex, ubiCfmMdIndex, ubiCfmMaIndex, ubiCfmMepId } 
--    	::= { ubiCfmAisTable 1 }

  	
--  	UbiCfmAisEntry ::= SEQUENCE {        
--   			ubiCfmAisDestLevel			Integer32,                
--  			ubiCfmAisDefectType			Dot1agCfmAisDefectType,	
--   			ubiCfmAisType				INTEGER,
--			ubiCfmAisMacAddr			MacAddress,  
--			ubiCfmAisRowStatus			RowStatus
--     }
 
--	ubiCfmAisDestLevel OBJECT-TYPE
--    	SYNTAX      Integer32 
--    	MAX-ACCESS  read-write
--    	STATUS      current
--    	DESCRIPTION
--       		"       		"
--    	::= { ubiCfmAisEntry 1 }
   
 --	ubiCfmAisTxInterval OBJECT-TYPE
  --  	SYNTAX      INTEGER    (1 | 60)
  --  	MAX-ACCESS  read-write
  --  	STATUS      current
  --  	DESCRIPTION
  --     		"       		"
  --  	::= { ubiCfmAisEntry 2 } 

--	ubiCfmAisDefectType OBJECT-TYPE
--    	SYNTAX      Dot1agCfmAisDefectType
--    	MAX-ACCESS  read-write
--    	STATUS      current
--    	DESCRIPTION
--       		"       		"
--    	::= { ubiCfmAisEntry 2 } 

--	ubiCfmAisType OBJECT-TYPE
--    	SYNTAX      INTEGER   {            
--    		unicast(1),
 --   		multicast(2)
 --   	}
 --   	MAX-ACCESS  read-write
 --   	STATUS      current
  --  	DESCRIPTION
 --      		"       		"
 --   	::= { ubiCfmAisEntry 3 } 
    
--	ubiCfmAisMacAddr OBJECT-TYPE
 --   	SYNTAX      MacAddress
 --   	MAX-ACCESS  read-write
 --   	STATUS      current
 --   	DESCRIPTION
--       		"       		"
--    	::= { ubiCfmAisEntry 4 } 

 --  	ubiCfmAisRowStatus OBJECT-TYPE
 --   	SYNTAX      RowStatus
 --   	MAX-ACCESS  read-create
 -- --  	STATUS      current
 --   	DESCRIPTION
 --      		"The status of the row."
 --   	::= { ubiCfmAisEntry 5 }
                             
          
-- *****************************************************************
-- ubiCfmServerMepTable
-- *****************************************************************          

	ubiCfmServerMepTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmServerMepEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"A Server MEP represents the compound function of the 
        	Server layer termination function and Server/ETH adaptation 
        	function which is used to notify the ETH layer MEPs upon 
        	failure detection by the Server layer termination function or 
        	Server/ETH adaptation function, where the Server layer 
        	termination function is expected to run OAM mechanisms specific 
        	to the Server layer. 
        	        	
        	A Server MEP needs to support ETH-AIS function, as described 
        	in clause 7.4, where the Server/ETH adaptation function is 
        	required to issue frames with ETH-AIS information upon detection of
			defect at the Server layer by the Server layer termination 
			and/or adaptation function.
			(ITU-T Y.1731 5.3.1)"
    	::= { ubiCfmServerMep 1 }

  	ubiCfmServerMepEntry OBJECT-TYPE
    	SYNTAX          UbiCfmServerMepEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Server MEP entry"
    	INDEX           { ubiBridgeId, ifindex }
    	::= { ubiCfmServerMepTable 1 }

  	
  	UbiCfmServerMepEntry ::= SEQUENCE {        
	       	ubiCfmServerMepTxInterval		INTEGER, 
        	ubiCfmServerMepAisLevel			Dot1agCfmMDLevel,    
        	ubiCfmServerMepRowStatus       	RowStatus           
        }

  	ubiCfmServerMepTxInterval OBJECT-TYPE
    	SYNTAX          INTEGER  (1 | 60)
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Periodic Interval of AIS Transmission" 
    	::= { ubiCfmServerMepEntry 1 }

	ubiCfmServerMepAisLevel OBJECT-TYPE
    	SYNTAX      Dot1agCfmMDLevel
    	MAX-ACCESS  read-write
   	 	STATUS      current
    	DESCRIPTION
      	 	"Destinaction Maintenance Domain Level of AIS"
    	::= { ubiCfmServerMepEntry 2 }
  
  	ubiCfmServerMepRowStatus OBJECT-TYPE
    	SYNTAX      RowStatus
    	MAX-ACCESS  read-create
    	STATUS      current
    	DESCRIPTION
       		"The status of the row."
    	::= { ubiCfmServerMepEntry 3 }


-- *****************************************************************
-- ubiCfmNotificationEnables
-- *****************************************************************  
  
	ubiCfmRemoteMepStateChangeEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Remote MEP state(CC state) change Notification"         
  	 	DEFVAL          { false } 
    	::= { ubiCfmNotificationEnables 1 }  
  
	ubiCfmPmEventEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"ubiCfmMepPmState change Notification"         
  	 	DEFVAL          { false } 
    	::= { ubiCfmNotificationEnables 2 } 
    	
    ubiCfmCCConfigDefectAlarmEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Detect CCM config Defect notification"         
  	 	DEFVAL          { false } 
    	::= { ubiCfmNotificationEnables 3 }

                         
--	ubiCfmRemoteMepStatusChangeEnabled OBJECT-TYPE
--    	SYNTAX          TruthValue
--    	MAX-ACCESS      read-write
--    	STATUS          current
--    	DESCRIPTION
--        	""         
--  	 	DEFVAL          { false } 
--    	::= { ubiCfmNotificationEnables 1 }

--	ubiCfmAggPortRemoteMepStatusChangeEnabled OBJECT-TYPE
--    	SYNTAX          TruthValue
--    	MAX-ACCESS      read-write
--    	STATUS          current
--    	DESCRIPTION
--        	""         
--  	 	DEFVAL          { false } 
--    	::= { ubiCfmNotificationEnables 2 }
                         
--	ubiCfmPmFrameDelayEventEnabled OBJECT-TYPE
--    	SYNTAX          TruthValue
--    	MAX-ACCESS      read-write
--    	STATUS          current
--    	DESCRIPTION
--        	""         
--  	 	DEFVAL          { false } 
--    	::= { ubiCfmNotificationEnables 3 }

--	ubiCfmPmFrameLossEventEnabled OBJECT-TYPE
--    	SYNTAX          TruthValue
--    	MAX-ACCESS      read-write
--    	STATUS          current
--    	DESCRIPTION
--        	""         
--  	 	DEFVAL          { false } 
--    	::= { ubiCfmNotificationEnables 4 }

           

-- *****************************************************************
-- ubiCfmTrack
-- *****************************************************************  
  
	ubiCfmTrackEnable OBJECT-TYPE
    	SYNTAX          BITS {       
    		rdi(0),
    		link-down(1)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Not use"         
	   	::= { ubiCfmTrack 1 }  
  

	ubiCfmTrackTargetTable OBJECT-TYPE
		SYNTAX          SEQUENCE OF UbiCfmTrackTargetEntry
		MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Not use"
    	::= { ubiCfmTrack 2 }

  	ubiCfmTrackTargetEntry OBJECT-TYPE
    	SYNTAX          UbiCfmTrackTargetEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Not use"
    	INDEX   { ifindex }
    	::= { ubiCfmTrackTargetTable 1 }

  	
  	UbiCfmTrackTargetEntry ::= SEQUENCE {        
	       	ubiCfmTrackTargetSet 	INTEGER        
        }

  	ubiCfmTrackTargetSet OBJECT-TYPE
    	SYNTAX          INTEGER  {      
    		enable(1),
    		disable(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Not use" 
    	::= { ubiCfmTrackTargetEntry 1 }
    
    
    
    

        
-- *****************************************************************
-- ubiCfmMIBConformance
-- *****************************************************************

-- Conformance Information
ubiCfmMIBCompliances  	OBJECT IDENTIFIER		::= { ubiCFMMIBConformance 1 }
ubiCfmMIBGroups  		OBJECT IDENTIFIER		::= { ubiCFMMIBConformance 2 }


-- compliance statements

	ubiVlanMIBCompliance MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"The compliance statement for VTP implementations."
    	MODULE          -- this module
    	MANDATORY-GROUPS {   
    					ubiCfmMaGroup          
        }
    	::= { ubiCfmMIBCompliances 1 }

-- units of conformance

	ubiCfmMaGroup OBJECT-GROUP
    	OBJECTS         {   
        }
    	STATUS          current
    	DESCRIPTION
        	""
    	::= { ubiCfmMIBGroups 1 }
END