path: root/MIBS/transition/TN-CES-ROUTING-MIB

-- *****************************************************************
-- Transition Networks CES ROUTING MIB
--
-- Copyright (C) 2014  Transition Networks, Inc. All Rights Reserved.
-- *****************************************************************

-- ---------------------------------------------------------- --
-- MIB for the Circuit Emulation Service (CES) call routing
-- features of Transition Networks products.
-- ---------------------------------------------------------- --

TN-CES-ROUTING-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI
    InetAddressType, InetAddress FROM INET-ADDRESS-MIB
    TruthValue, DisplayString FROM SNMPv2-TC
    OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF
    tnProducts FROM TRANSITION-SMI;

tnCesRoutingMIB MODULE-IDENTITY
    LAST-UPDATED "201406300000Z"
    ORGANIZATION "Transition Networks, Inc."
    CONTACT-INFO
    "Transition Networks
     Technical Support

     10900 Red Circle Drive
     Minnetonka, MN 55343 USA
     Tel: +1-800-526-9267

     E-mail: techsupport@transition.com"
    DESCRIPTION
    "The MIB module for the Circuit Emulation Service call routing."
    REVISION "201406300000Z"
    DESCRIPTION
    "Initial version."
    ::= { tnProducts 61 }

-- Top level structure

tnCesRoutingObjects OBJECT IDENTIFIER ::= { tnCesRoutingMIB 1 }
tnCesRoutingConformance OBJECT IDENTIFIER ::= { tnCesRoutingMIB 2 }
tnCesRoutingCompliances OBJECT IDENTIFIER ::= { tnCesRoutingConformance 1 }
tnCesRoutingGroups OBJECT IDENTIFIER ::= { tnCesRoutingConformance 2 }

-- Call routing group configuration

tnCesGroupTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TnCesGroupEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Table of interface groups that can be used in call routing profiles."
    ::= { tnCesRoutingObjects 1 }

tnCesGroupEntry OBJECT-TYPE
    SYNTAX       TnCesGroupEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Each entry is a group of interfaces that can be used in call routing profiles."
    INDEX        { tnCesGroupIndex,
                   tnCesGroupPortNumber }
    ::= { tnCesGroupTable 1 }

TnCesGroupEntry ::= SEQUENCE {
    tnCesGroupIndex Unsigned32,
    tnCesGroupPortNumber Unsigned32,
    tnCesGroupName DisplayString,
    tnCesGroupCyclicPortSearch TruthValue,
    tnCesGroupCyclicChannelSearch TruthValue,
    tnCesGroupChannels Unsigned32
}

tnCesGroupIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Index number of a call routing group. This index can be used as a call routing source or destination."
    ::= { tnCesGroupEntry 1 }

tnCesGroupPortNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (1..32)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "The TDM or RS530 port number."
    ::= { tnCesGroupEntry 2 }

tnCesGroupName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..31))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The name of this call routing group."
    ::= { tnCesGroupEntry 3 }

tnCesGroupCyclicPortSearch OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Causes calls to be routed to channels in this group by increasing port number."
    ::= { tnCesGroupEntry 4 }

tnCesGroupCyclicChannelSearch OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Causes calls to be routed to channels in this group by increasing channel number."
    ::= { tnCesGroupEntry 5 }

tnCesGroupChannels OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Bitmap of whether each channel on this TDM port is assigned to this group."
    ::= { tnCesGroupEntry 6 }

-- Call routing IP names configuration.

tnCesIPNameTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TnCesIPNameEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Table of named IP address that can be used as routing destinations."
    ::= { tnCesRoutingObjects 2 }

tnCesIPNameEntry OBJECT-TYPE
    SYNTAX       TnCesIPNameEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Each entry is a named IP address that can be used as a call routing destination."
    INDEX        { tnCesIPNameIndex }
    ::= { tnCesIPNameTable 1 }

TnCesIPNameEntry ::= SEQUENCE {
    tnCesIPNameIndex Unsigned32,
    tnCesIPNameName DisplayString,
    tnCesIPNameIpAddrType InetAddressType,
    tnCesIPNameIpAddr InetAddress
}

tnCesIPNameIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Index number of an IP named. This index can be used as a call routing destination."
    ::= { tnCesIPNameEntry 1 }

tnCesIPNameName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..31))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "A name associated with this IP address."
    ::= { tnCesIPNameEntry 2 }

tnCesIPNameIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The IP address type of this entry. Must be ipv4 or ipv6."
    ::= { tnCesIPNameEntry 3 }

tnCesIPNameIpAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The IP address of this entry."
    ::= { tnCesIPNameEntry 4 }

-- Routing profile configuration

tnCesProfileTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TnCesProfileEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Table of call routing profiles."
    ::= { tnCesRoutingObjects 3 }

tnCesProfileEntry OBJECT-TYPE
    SYNTAX       TnCesProfileEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Each entry is a call routing profile."
    INDEX        { tnCesProfileIndex }
    ::= { tnCesProfileTable 1 }

TnCesProfileEntry ::= SEQUENCE {
    tnCesProfileIndex Unsigned32,
    tnCesProfileName DisplayString,
    tnCesProfileType INTEGER,
    tnCesProfileEnabled TruthValue,
    tnCesProfileRerouteUnanswered TruthValue,
    tnCesProfileRerouteUnansweredSec Unsigned32,
    tnCesProfileSourceEndpointType INTEGER,
    tnCesProfileSourceItemIndex Unsigned32,
    tnCesProfileSourceChanNumber Unsigned32,
    tnCesProfileDestPrimEndpointType INTEGER,
    tnCesProfileDestPrimItemIndex Unsigned32,
    tnCesProfileDestPrimChanNumber Unsigned32,
    tnCesProfileDestSecEndpointType INTEGER,
    tnCesProfileDestSecItemIndex Unsigned32,
    tnCesProfileDestSecChanNumber Unsigned32,
    tnCesProfileDestTerEndpointType INTEGER,
    tnCesProfileDestTerItemIndex Unsigned32,
    tnCesProfileDestTerChanNumber Unsigned32,
    tnCesProfileVoiceConversion INTEGER,
    tnCesProfilePrimaryCalledNumber DisplayString,
    tnCesProfilePrimaryCallingNumber DisplayString,
    tnCesProfileSecCalledNumber DisplayString,
    tnCesProfileSecCallingNumber DisplayString,
    tnCesProfileTerCalledNumber DisplayString,
    tnCesProfileTerCallingNumber DisplayString
}

tnCesProfileIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..254)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Index of call routing profile."
    ::= { tnCesProfileEntry 1 }

tnCesProfileName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..31))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The name of this call routing profile."
    ::= { tnCesProfileEntry 2 }

tnCesProfileType OBJECT-TYPE
    SYNTAX      INTEGER {
                standard (0),
                converting (1),
                barring (2),
                nailed (3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The call routing profile type. Standard profiles route incoming calls from a souce interface to a destination interface. Convering profiles additionally perform number translations. Barring profiles block matching calls."
    ::= { tnCesProfileEntry 3 }

tnCesProfileEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Whether this call routing profile is enabled or disabled."
    ::= { tnCesProfileEntry 4 }

tnCesProfileRerouteUnanswered OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Whether to reroute calls that are not answered within a time limit."
    ::= { tnCesProfileEntry 5 }

tnCesProfileRerouteUnansweredSec OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Time limit in seconds after which to re-route unanswered calls. Only relevant when tnCesProfileRerouteUnanswered is true."
    ::= { tnCesProfileEntry 6 }

tnCesProfileSourceEndpointType OBJECT-TYPE
    SYNTAX      INTEGER {
                none (0),
                all (1),
                tdmport (2),
                tdmchannel (3),
                logicallink (4),
                group (5)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The type of source endpoint."
    ::= { tnCesProfileEntry 7 }

tnCesProfileSourceItemIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call source, depending on tnCesProfileSourceEndpointType: tdmport or tdmchannel - the TDM port number, logicallink - the logical link number, group - the index in tnCesGroupTable of the group."
    ::= { tnCesProfileEntry 8 }

tnCesProfileSourceChanNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (0..31)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call source channel number, only relevant when tnCesProfileSourceEndpointType is tdmchannel."
    ::= { tnCesProfileEntry 9 }

tnCesProfileDestPrimEndpointType OBJECT-TYPE
    SYNTAX      INTEGER {
                none (0),
                all (1),
                tdmport (2),
                tdmchannel (3),
                logicallink (4),
                group (5),
                ipname (6)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The type of primary destination endpoint."
    ::= { tnCesProfileEntry 10 }

tnCesProfileDestPrimItemIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call primary destination, depending on tnCesProfileDestPrimEndpointType: tdmport or tdmchannel - the TDM port number, logicallink - the logical link number, group - the index in tnCesGroupTable of the group, ipname - the index in tnCesIPNameTable of the IP name."
    ::= { tnCesProfileEntry 11 }

tnCesProfileDestPrimChanNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (0..31)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call primary destination channel number, only relevant when tnCesProfileDestPrimEndpointType is tdmchannel."
    ::= { tnCesProfileEntry 12 }

tnCesProfileDestSecEndpointType OBJECT-TYPE
    SYNTAX      INTEGER {
                none (0),
                all (1),
                tdmport (2),
                tdmchannel (3),
                logicallink (4),
                group (5),
                ipname (6)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The type of secondary destination endpoint."
    ::= { tnCesProfileEntry 13 }

tnCesProfileDestSecItemIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call secondary destination, depending on tnCesProfileDestSecEndpointType: tdmport or tdmchannel - the TDM port number, logicallink - the logical link number, group - the index in tnCesGroupTable of the group, ipname - the index in tnCesIPNameTable of the IP name."
    ::= { tnCesProfileEntry 14 }

tnCesProfileDestSecChanNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (0..31)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call secondary destination channel number, only relevant when tnCesProfileDestSecEndpointType is tdmchannel."
    ::= { tnCesProfileEntry 15 }

tnCesProfileDestTerEndpointType OBJECT-TYPE
    SYNTAX      INTEGER {
                none (0),
                all (1),
                tdmport (2),
                tdmchannel (3),
                logicallink (4),
                group (5),
                ipname (6)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The type of tertiary destination endpoint."
    ::= { tnCesProfileEntry 16 }

tnCesProfileDestTerItemIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call tertiary destination, depending on tnCesProfileDestTerEndpointType: tdmport or tdmchannel - the TDM port number, logicallink - the logical link number, group - the index in tnCesGroupTable of the group, ipname - the index in tnCesIPNameTable of the IP name."
    ::= { tnCesProfileEntry 17 }

tnCesProfileDestTerChanNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (0..31)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Call tertiary destination channel number, only relevant when tnCesProfileDestTerEndpointType is tdmchannel."
    ::= { tnCesProfileEntry 18 }

tnCesProfileVoiceConversion OBJECT-TYPE
    SYNTAX      INTEGER {
                none (0),
                utoa (1),
                atou (2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Whether to do voice conversion, none, u law to A law or A law to u law."
    ::= { tnCesProfileEntry 19 }

tnCesProfilePrimaryCalledNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Primary called number in call conversions. Only applies when tnCesProfileType is converting."
    ::= { tnCesProfileEntry 20 }

tnCesProfilePrimaryCallingNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Primary calling number in call conversions. Only applies when tnCesProfileType is converting."
    ::= { tnCesProfileEntry 21 }

tnCesProfileSecCalledNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Secondary called number in call conversions. Only applies when tnCesProfileType is converting."
    ::= { tnCesProfileEntry 22 }

tnCesProfileSecCallingNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Secondary calling number in call conversions. Only applies when tnCesProfileType is converting."
    ::= { tnCesProfileEntry 23 }

tnCesProfileTerCalledNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Tertiary called number in call conversions. Only applies when tnCesProfileType is converting."
    ::= { tnCesProfileEntry 24 }

tnCesProfileTerCallingNumber OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..19))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Tertiary calling number in call conversions. Only applies when tnCesProfileType is converting."
    ::= { tnCesProfileEntry 25 }

-- Call routing profile called number list.

tnCesProfCalledNumTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TnCesProfCalledNumEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Table of call routing profile called numbers configuration."
    ::= { tnCesRoutingObjects 4 }

tnCesProfCalledNumEntry OBJECT-TYPE
    SYNTAX       TnCesProfCalledNumEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Each entry is a call routing profile called number list."
    INDEX        { tnCesProfCalledNumProfileIndex }
    ::= { tnCesProfCalledNumTable 1 }

TnCesProfCalledNumEntry ::= SEQUENCE {
    tnCesProfCalledNumProfileIndex Unsigned32,
    tnCesProfCalledNumValue OCTET STRING
}

tnCesProfCalledNumProfileIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..254)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Index of call routing profile that this called number list applies to."
    ::= { tnCesProfCalledNumEntry 1 }

tnCesProfCalledNumValue OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "List of comma separated called number values."
    ::= { tnCesProfCalledNumEntry 2 }

-- Call routing profile calling number list.

tnCesProfCallingNumTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TnCesProfCallingNumEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Table of call routing profile calling numbers configuration."
    ::= { tnCesRoutingObjects 5 }

tnCesProfCallingNumEntry OBJECT-TYPE
    SYNTAX       TnCesProfCallingNumEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Each entry is a call routing profile calling number list."
    INDEX        { tnCesProfCallingNumProfileIndex }
    ::= { tnCesProfCallingNumTable 1 }

TnCesProfCallingNumEntry ::= SEQUENCE {
    tnCesProfCallingNumProfileIndex Unsigned32,
    tnCesProfCallingNumValue OCTET STRING
}

tnCesProfCallingNumProfileIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..254)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Index of call routing profile that this calling number applies to."
    ::= { tnCesProfCallingNumEntry 1 }

tnCesProfCallingNumValue OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "List of comma separated calling number values."
    ::= { tnCesProfCallingNumEntry 2 }

-- Call routing profile schedule configuration.

tnCesProfSchedTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TnCesProfileSchedEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Table of call routing profile schedule configuration."
    ::= { tnCesRoutingObjects 6 }

tnCesProfSchedEntry OBJECT-TYPE
    SYNTAX       TnCesProfileSchedEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
    "Each entry has the current configuration of a call routing profile schedule."
    INDEX        { tnCesProfSchedProfileIndex,
                   tnCesProfSchedNumber }
    ::= { tnCesProfSchedTable 1 }

TnCesProfileSchedEntry ::= SEQUENCE {
    tnCesProfSchedProfileIndex Unsigned32,
    tnCesProfSchedNumber Unsigned32,
    tnCesProfSchedEnable TruthValue,
    tnCesProfSchedStartTimeMonHours Unsigned32,
    tnCesProfSchedStartTimeMonMins Unsigned32,
    tnCesProfSchedStopTimeMonHours Unsigned32,
    tnCesProfSchedStopTimeMonMins Unsigned32,
    tnCesProfSchedStartTimeTueHours Unsigned32,
    tnCesProfSchedStartTimeTueMins Unsigned32,
    tnCesProfSchedStopTimeTueHours Unsigned32,
    tnCesProfSchedStopTimeTueMins Unsigned32,
    tnCesProfSchedStartTimeWedHours Unsigned32,
    tnCesProfSchedStartTimeWedMins Unsigned32,
    tnCesProfSchedStopTimeWedHours Unsigned32,
    tnCesProfSchedStopTimeWedMins Unsigned32,
    tnCesProfSchedStartTimeThuHours Unsigned32,
    tnCesProfSchedStartTimeThuMins Unsigned32,
    tnCesProfSchedStopTimeThuHours Unsigned32,
    tnCesProfSchedStopTimeThuMins Unsigned32,
    tnCesProfSchedStartTimeFriHours Unsigned32,
    tnCesProfSchedStartTimeFriMins Unsigned32,
    tnCesProfSchedStopTimeFriHours Unsigned32,
    tnCesProfSchedStopTimeFriMins Unsigned32,
    tnCesProfSchedStartTimeSatHours Unsigned32,
    tnCesProfSchedStartTimeSatMins Unsigned32,
    tnCesProfSchedStopTimeSatHours Unsigned32,
    tnCesProfSchedStopTimeSatMins Unsigned32,
    tnCesProfSchedStartTimeSunHours Unsigned32,
    tnCesProfSchedStartTimeSunMins Unsigned32,
    tnCesProfSchedStopTimeSunHours Unsigned32,
    tnCesProfSchedStopTimeSunMins Unsigned32
}

tnCesProfSchedProfileIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..254)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Index of call routing profile that this schedule applies to."
    ::= { tnCesProfSchedEntry 1 }

tnCesProfSchedNumber OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Schedule number for this call routing profile. Currently only a single schedule per call routing profile is supported."
    ::= { tnCesProfSchedEntry 2 }

tnCesProfSchedEnable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Whether to enable this call routing profile schedule. When false, there is no scheduling and this profile is always active. When true, the profile is enabled according to its schedule."
    ::= { tnCesProfSchedEntry 3 }

tnCesProfSchedStartTimeMonHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 4 }

tnCesProfSchedStartTimeMonMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 5 }

tnCesProfSchedStopTimeMonHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 6 }

tnCesProfSchedStopTimeMonMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 7 }

tnCesProfSchedStartTimeTueHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 8 }

tnCesProfSchedStartTimeTueMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 9 }

tnCesProfSchedStopTimeTueHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 10 }

tnCesProfSchedStopTimeTueMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 11 }

tnCesProfSchedStartTimeWedHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 12 }

tnCesProfSchedStartTimeWedMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 13 }

tnCesProfSchedStopTimeWedHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 14 }

tnCesProfSchedStopTimeWedMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 15 }

tnCesProfSchedStartTimeThuHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 16 }

tnCesProfSchedStartTimeThuMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 17 }

tnCesProfSchedStopTimeThuHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 18 }

tnCesProfSchedStopTimeThuMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 19 }

tnCesProfSchedStartTimeFriHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 20 }

tnCesProfSchedStartTimeFriMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 21 }

tnCesProfSchedStopTimeFriHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 22 }

tnCesProfSchedStopTimeFriMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 23 }

tnCesProfSchedStartTimeSatHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 24 }

tnCesProfSchedStartTimeSatMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 25 }

tnCesProfSchedStopTimeSatHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 26 }

tnCesProfSchedStopTimeSatMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 27 }

tnCesProfSchedStartTimeSunHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 28 }

tnCesProfSchedStartTimeSunMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule start time. The start time must not be later than the stop time."
    ::= { tnCesProfSchedEntry 29 }

tnCesProfSchedStopTimeSunHours OBJECT-TYPE
    SYNTAX      Unsigned32 (0..23)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Hours component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 30 }

tnCesProfSchedStopTimeSunMins OBJECT-TYPE
    SYNTAX      Unsigned32 (0..59)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "Minutes component of schedule stop time. The stop time must not be earlier than the start time."
    ::= { tnCesProfSchedEntry 31 }

-- Compliance section.

tnCesRoutingGroup OBJECT-GROUP
    OBJECTS { tnCesIPNameName,
              tnCesIPNameIpAddrType,
              tnCesIPNameIpAddr,
              tnCesGroupName,
              tnCesGroupCyclicPortSearch,
              tnCesGroupCyclicChannelSearch,
              tnCesGroupChannels,
              tnCesProfileName,
              tnCesProfileType,
              tnCesProfileEnabled,
              tnCesProfileRerouteUnanswered,
              tnCesProfileRerouteUnansweredSec,
              tnCesProfileSourceEndpointType,
              tnCesProfileSourceItemIndex,
              tnCesProfileSourceChanNumber,
              tnCesProfileDestPrimEndpointType,
              tnCesProfileDestPrimItemIndex,
              tnCesProfileDestPrimChanNumber,
              tnCesProfileDestSecEndpointType,
              tnCesProfileDestSecItemIndex,
              tnCesProfileDestSecChanNumber,
              tnCesProfileDestTerEndpointType,
              tnCesProfileDestTerItemIndex,
              tnCesProfileDestTerChanNumber,
              tnCesProfileVoiceConversion,
              tnCesProfilePrimaryCalledNumber,
              tnCesProfilePrimaryCallingNumber,
              tnCesProfileSecCalledNumber,
              tnCesProfileSecCallingNumber,
              tnCesProfileTerCalledNumber,
              tnCesProfileTerCallingNumber,
              tnCesProfCalledNumValue,
              tnCesProfCallingNumValue,
              tnCesProfSchedEnable,
              tnCesProfSchedStartTimeMonHours,
              tnCesProfSchedStartTimeMonMins,
              tnCesProfSchedStopTimeMonHours,
              tnCesProfSchedStopTimeMonMins,
              tnCesProfSchedStartTimeTueHours,
              tnCesProfSchedStartTimeTueMins,
              tnCesProfSchedStopTimeTueHours,
              tnCesProfSchedStopTimeTueMins,
              tnCesProfSchedStartTimeWedHours,
              tnCesProfSchedStartTimeWedMins,
              tnCesProfSchedStopTimeWedHours,
              tnCesProfSchedStopTimeWedMins,
              tnCesProfSchedStartTimeThuHours,
              tnCesProfSchedStartTimeThuMins,
              tnCesProfSchedStopTimeThuHours,
              tnCesProfSchedStopTimeThuMins,
              tnCesProfSchedStartTimeFriHours,
              tnCesProfSchedStartTimeFriMins,
              tnCesProfSchedStopTimeFriHours,
              tnCesProfSchedStopTimeFriMins,
              tnCesProfSchedStartTimeSatHours,
              tnCesProfSchedStartTimeSatMins,
              tnCesProfSchedStopTimeSatHours,
              tnCesProfSchedStopTimeSatMins,
              tnCesProfSchedStartTimeSunHours,
              tnCesProfSchedStartTimeSunMins,
              tnCesProfSchedStopTimeSunHours,
              tnCesProfSchedStopTimeSunMins
            }
  STATUS  current
  DESCRIPTION
    "Objects which implement CES support on a device."
  ::= { tnCesRoutingGroups 1 }

tnCesRoutingMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
    "You will comply. Respect my authority!"
    MODULE  -- compliance to the containing MIB module
    MANDATORY-GROUPS { tnCesRoutingGroup }
    ::= { tnCesRoutingCompliances 1 }

END