path: root/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB

-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-MPLS-LDP-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-MPLS-LDP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InetAddressType
        FROM INET-ADDRESS-MIB
    prvtcrldpPmIndex, prvtcrldpSigIndex
        FROM PRVT-CR-LDP-MIB
    mpls
        FROM PRVT-SWITCH-MIB
    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    RowStatus, TEXTUAL-CONVENTION, TruthValue
        FROM SNMPv2-TC;

prvtMplsLdpMIB MODULE-IDENTITY
    LAST-UPDATED "200911260000Z"
    ORGANIZATION 
        "BATM Advanced Communication"
    CONTACT-INFO 
        "BATM/Telco Systems Support team
         Email:
         For North America: techsupport@telco.com
         For North Europe: support@batm.de, info@batm.de
         For the rest of the world: techsupport@telco.com"
    DESCRIPTION 
        "This MIB contains managed object definitions for the
         'Multiprotocol Label Switching, Label Distribution
         Protocol, LDP'."
    REVISION    "200911260000Z"
    DESCRIPTION 
        "Created MplsLdpIdentifier TC."
    REVISION    "200606030000Z"
    DESCRIPTION 
        "Initial version published as part of RFC 3815."
    ::= { mpls 1 }


MplsRetentionMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The label retention mode which specifies whether
         an LSR maintains a label binding for a FEC
         learned from a neighbor that is not its next hop
         for the FEC.
         
         If the value is conservative(1) then advertised
         label mappings are retained only if they will be
         used to forward packets, i.e., if label came from
         a valid next hop.
         
         If the value is liberal(2) then all advertised
         label mappings are retained whether they are from
         a valid next hop or not."
    REFERENCE   
        "Multiprotocol Label Switching Architecture,
         RFC3031.
         
         LDP Specification, RFC3036, Section 2.6.2."
    SYNTAX      INTEGER { conservative(1), liberal(2) }

MplsLdpLabelType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The Layer 2 label types which are defined for MPLS
         LDP and/or CR-LDP are generic(1), atm(2), or
         frameRelay(3)."
    SYNTAX      INTEGER { generic(1), atm(2), frameRelay(3) }

MplsLabelDistributionMethod ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The label distribution method which is also called
         the label advertisement mode [RFC3036].
         Each interface on an LSR is configured to operate
         in either Downstream Unsolicited or Downstream
         on Demand."
    REFERENCE   
        "Multiprotocol Label Switching Architecture,
         RFC3031.
         
         LDP Specification, RFC3036, Section 2.6.3."
    SYNTAX      INTEGER { downstreamOnDemand(1), 
                    downstreamUnsolicited(2) }

PrvtMplsLdpIdentifier ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255a"
    STATUS      current
    DESCRIPTION 
        "The LDP identifier is used to identify a
         Label Switching Router (LSR) label space.
         
         The format is an ASCII representation of
         a string in the form A.B.C.D:S,
         where A,B,C,D identify the LSR and must
         be a globally unique value, such as a 32-bit
         router ID assigned to the LSR,
         and S identifies a specific label space
         within the LSR."
    SYNTAX      OCTET STRING (SIZE(10..20))

MplsIndexType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "This is an octet string that can be used as a table
         index in cases where a large addressable space is
         required such as on an LSR where many applications
         may be provisioning labels.
         
         Note that the string containing the single octet with
         the value 0x00 is a reserved value used to represent
         special cases. When this TEXTUAL-CONVENTION is used
         as the SYNTAX of an object, the DESCRIPTION clause
         MUST specify if this special value is valid and if so
         what the special meaning is.
         
         In systems that provide write access to the MPLS-LSR-STD
         MIB, mplsIndexType SHOULD be used as a simple multi-digit
         integer encoded as an octet string.
         No further overloading of the meaning of an index SHOULD
         be made.
         
         In systems that do not offer write access to the MPLS-LSR-STD
         MIB, the mplsIndexType may contain implicit formatting that is
         specific to the implementation to convey additional
         information such as interface index, physical card or
         device, or application id. The interpretation of this
         additional formatting is implementation dependent and
         not covered in this document. Such formatting MUST
         NOT impact the basic functionality of read-only access
         to the MPLS-LSR-STD MIB by management applications that are
         not aware of the formatting rules.
         
         The MIB is implemented in PRVT-LMGR with write-access.
         As specified above, PRVT-LMGR treats the index values of this type
         as simple integer types.
         
         In order to reduce the effort required to upgrade from earlier
         versions of the MIB, and to simplify management of static LSPs,
         this type is mapped on to an Integer32 in this implementation."
    SYNTAX      Integer32 (0..2147483647)

PrvtMplsLdpInetAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x "
    STATUS      current
    DESCRIPTION 
        "Same as InetAddress from INET-ADDRESS-MIB except restricted
         to IPv4 or IPv6 addresses."
    SYNTAX      OCTET STRING (SIZE(4 | 16))

PrvtMplsLdpTimeStamp ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Same as TimeStamp from SNMPv2-TC, but has syntax Integer32"
    SYNTAX      Integer32

PrvtMplsLdpTimeInterval ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Same as TimeInterval from SNMPv2-TC, but has syntax Integer32"
    SYNTAX      Integer32

mplsLdpObjects OBJECT IDENTIFIER
    ::= { prvtMplsLdpMIB 1 }

mplsLdpEntityTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MplsLdpEntityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table contains information about the
         MPLS Label Distribution Protocol Entities which
         exist on this Label Switching Router (LSR)
         or Label Edge Router (LER)."
    ::= { mplsLdpObjects 1 }

mplsLdpEntityEntry OBJECT-TYPE
    SYNTAX      MplsLdpEntityEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in this table represents an LDP entity.
         An entry can be created by a network administrator
         or by an SNMP agent as instructed by LDP."
    INDEX       { prvtcrldpSigIndex, mplsLdpEntityLdpId, 
                  mplsLdpEntityIndex }
    ::= { mplsLdpEntityTable 1 }

MplsLdpEntityEntry ::= SEQUENCE {
    mplsLdpEntityLdpId                  PrvtMplsLdpIdentifier,
    mplsLdpEntityIndex                  Unsigned32,
    mplsLdpEntityRowStatus              RowStatus,
    mplsLdpEntityAdminStatus            INTEGER,
    mplsLdpEntityOperStatus             INTEGER,
    mplsLdpEntityMaxPduLength           Unsigned32,
    mplsLdpEntityKeepAliveHoldTimer     Unsigned32,
    mplsLdpEntityHelloHoldTimer         Unsigned32,
    mplsLdpEntityTargetPeer             TruthValue,
    mplsLdpEntityTargetPeerAddrType     InetAddressType,
    mplsLdpEntityTargetPeerAddr         PrvtMplsLdpInetAddress
}

mplsLdpEntityLdpId OBJECT-TYPE
    SYNTAX      PrvtMplsLdpIdentifier
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The LDP identifier. The first four octets encode an IP
         address assigned to the LSR, and the last two octets
         identify a specific label space within the LSR."
    REFERENCE   
        "RFC3036, LDP Specification, Section on LDP Identifiers."
    ::= { mplsLdpEntityEntry 1 }

mplsLdpEntityIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This index is used as a secondary index to uniquely
         identify this row.
         
         A secondary index (this object) is meaningful to some
         but not all, LDP implementations. For example
         an LDP implementation which uses PPP would
         use this index to differentiate PPP sub-links.
         
         Another way to use this index is to give this the
         value of ifIndex. However, this is dependant
         on the implementation.
         
         This field is deprecated in the following tables provided
         by PRVT-CR-LDP Session Controller.
         
         - mplsLdpEntityTable.
         - mplsLdpPeerTable.
         
         In these tables the value of the Entity Index will always
         be filled in to be 1."
    ::= { mplsLdpEntityEntry 2 }

mplsLdpEntityRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "An object that allows entries in this table to
         be created and deleted using the
         RowStatus convention.
         
         Once the 'mplsLdpEntityAdminStatus' object has
         the value of 'up' and this object has the value
         of 'active' then the Entity will atttempt to
         contact an LDP Peer. If the value of this object
         is changed to 'notInService', then the Entity looses
         contact with the LDP Peer and all information related
         to that Peer must be removed from the MIB. This has
         the same effect as changing 'mplsLdpEntityAdminStatus'
         from 'enable' to 'disable'.
         
         When this object is set to 'active' and the value of
         the 'mplsLdpEntityAdminStatus' is 'enable' then
         this Entity will attempt to contact the Peer and
         establish new sessions."
    ::= { mplsLdpEntityEntry 3 }

mplsLdpEntityAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER { enable(1), disable(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The administrative status of this LDP Entity.
         If this object is changed from 'enable' to 'disable'
         and this entity has already attempted to establish
         contact with a Peer (which implies that the
         'mplsLdpEntityRowStatus' object has been set to
         'active'), then all contact with that
         Peer is lost and all information from that Peer
         needs to be removed from the MIB. (This implies
         that the network management subsystem should clean
         up any related entry in the mplsLdpPeerTable. This
         further implies that a 'tear-down' for that session
         is issued and the session and all information related
         to that session cease to exist).
         
         At this point the user is able to change values
         which are related to this entity.
         
         When the admin status is set back to 'enable', then
         this Entity will attempt to establish a new session
         with the Peer."
    ::= { mplsLdpEntityEntry 4 }

mplsLdpEntityOperStatus OBJECT-TYPE
    SYNTAX      INTEGER { unknown(1), enabled(2), disabled(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The operational status of this LDP Entity.
         
         The value of unknown(1) indicates that the
         operational status cannot be determined at
         this time. The value of unknown should be
         a transient condition before changing
         to enabled(2) or disabled(3)."
    ::= { mplsLdpEntityEntry 5 }

mplsLdpEntityMaxPduLength OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The maximum PDU Length that is sent in
         the Common Session Parameters of an Initialization
         Message. According to the LDP Specification [RFC3036]
         a value of 255 or less specifies the
         default maximum length of 4096 octets.
         
         The receiving LSR MUST calculate the maximum PDU
         length for the session by using the smaller of its and
         its peer's proposals for Max PDU Length."
    REFERENCE   
        "RFC3036, LDP Specification, Section 3.5.3.
         Initialization Message."
    ::= { mplsLdpEntityEntry 6 }

mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The 16-bit integer value which is the proposed keep
         alive hold timer for this LDP Entity."
    ::= { mplsLdpEntityEntry 7 }

mplsLdpEntityHelloHoldTimer OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The 16-bit integer value which is the proposed Hello
         hold timer for this LDP Entity. The Hello Hold time
         in seconds.
         
         An LSR maintains a record of Hellos received
         from potential peers. This object represents
         the Hold Time in the Common Hello Parameters TLV of
         the Hello Message.
         
         A value of 0 is a default value and should be
         interpretted in conjunction with the
         mplsLdpEntityTargetPeer object.
         
         If the value of this object is 0: if the value of the
         mplsLdpEntityTargetPeer object is false(2), then this
         specifies that the Hold Time's actual default value is
         15 seconds (i.e., the default Hold time for Link Hellos
         is 15 seconds). Otherwise if the value of the
         mplsLdpEntityTargetPeer object is true(1), then this
         specifies that the Hold Time's actual default value is
         45 seconds (i.e., the default Hold time for Targeted
         Hellos is 45 seconds).
         
         A value of 65535 means infinite (i.e., wait forever).
         
         All other values represent the amount of time in
         seconds to wait for a Hello Message. Setting the
         hold time to a value smaller than 15 is not
         recommended, although not forbidden according
         to RFC3036.
         
         For auto-created entities that use the global label space
         (and therefore might correspond to more than one
         adjacency over more than one interface), this value will
         only be meaningful if all interfaces that correspond to
         this entity are configured to use the same hello hold
         time, since this property can be configured on a per
         interface basis.
         
         If the interfaces have differing configurations, the
         value returned on a MIB Get will be 0."
    REFERENCE   
        "RFC3036, LDP Specification, Section 3.5.2.,
         Hello Message."
    ::= { mplsLdpEntityEntry 8 }

mplsLdpEntityTargetPeer OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If this LDP entity uses targeted peer then set
         this to true."
    ::= { mplsLdpEntityEntry 9 }

mplsLdpEntityTargetPeerAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The type of the internetwork layer address used for
         the Extended Discovery. This object indicates how
         the value of mplsLdpEntityTargetPeerAddr is to
         be interpreted."
    ::= { mplsLdpEntityEntry 10 }

mplsLdpEntityTargetPeerAddr OBJECT-TYPE
    SYNTAX      PrvtMplsLdpInetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The value of the internetwork layer address
         used for the Extended Discovery. The value of
         mplsLdpEntityTargetPeerAddrType specifies how
         this address is to be interpreted."
    ::= { mplsLdpEntityEntry 11 }

mplsLdpPeerTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MplsLdpPeerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Information about LDP peers known by Entities in
         the mplsLdpEntityTable. The information in this table
         is based on information from the Entity-Peer interaction
         during session initialization but is not appropriate
         for the mplsLdpSessionTable, because objects in this
         table may or may not be used in session establishment."
    ::= { mplsLdpObjects 2 }

mplsLdpPeerEntry OBJECT-TYPE
    SYNTAX      MplsLdpPeerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Information about a single Peer which is related
         to a Session. NOTE: this table is used to
         augment the mplsLdpSessionTable."
    INDEX       { prvtcrldpPmIndex, mplsLdpEntityLdpId, 
                  mplsLdpEntityIndex, mplsLdpPeerLdpId }
    ::= { mplsLdpPeerTable 1 }

MplsLdpPeerEntry ::= SEQUENCE {
    mplsLdpPeerLdpId                PrvtMplsLdpIdentifier,
    mplsLdpPeerLabelDistMethod      MplsLabelDistributionMethod,
    mplsLdpPeerTransportAddrType    InetAddressType,
    mplsLdpPeerTransportAddr        PrvtMplsLdpInetAddress
}

mplsLdpPeerLdpId OBJECT-TYPE
    SYNTAX      PrvtMplsLdpIdentifier
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The LDP identifier of this LDP Peer."
    ::= { mplsLdpPeerEntry 1 }

mplsLdpPeerLabelDistMethod OBJECT-TYPE
    SYNTAX      MplsLabelDistributionMethod
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "For any given LDP session, the method of
         label distribution must be specified."
    ::= { mplsLdpPeerEntry 2 }

mplsLdpPeerTransportAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The type of the Internet address for the
         mplsLdpPeerTransportAddr object. The LDP
         specification describes this as being either
         an IPv4 Transport Address or IPv6 Transport
         Address which is used in opening the LDP session's
         TCP connection, or if the optional TLV is not
         present, then this is the IPv4/IPv6 source
         address for the UPD packet carrying the Hellos.
         
         This object specifies how the value of the
         mplsLdpPeerTransportAddr object should be
         interpreted."
    REFERENCE   
        "RFC3036, LDP Specification, Section 2.5.2
         Transport Connection Establishment and
         Section 3.5.2.1 Hello Message Procedures."
    ::= { mplsLdpPeerEntry 3 }

mplsLdpPeerTransportAddr OBJECT-TYPE
    SYNTAX      PrvtMplsLdpInetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The Internet address advertised by the peer
         in the Hello Message or the Hello source address.
         
         The type of this address is specified by the
         value of the mplsLdpPeerTransportAddrType
         object."
    REFERENCE   
        "RFC3036, LDP Specification, Section 2.5.2
         Transport Connection Establishment and
         Section 3.5.2.1 Hello Message Procedures."
    ::= { mplsLdpPeerEntry 4 }

mplsLdpSessionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MplsLdpSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "A table of Sessions between the LDP Entities
         and LDP Peers. Each row in this table
         represents a single session."
    ::= { mplsLdpObjects 3 }

mplsLdpSessionEntry OBJECT-TYPE
    SYNTAX      MplsLdpSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in this table represents information on a
         single session between an LDP Entity and LDP Peer.
         The information contained in a row is read-only.
         
         Please note: the Path Vector Limit for the
         Session is the value which is configured in
         the corresponding mplsLdpEntityEntry. The
         Peer's Path Vector Limit is in the
         mplsLdpPeerPathVectorLimit object in the
         mplsLdpPeerTable.
         
         Values which may differ from those configured are
         noted in the objects of this table. A value will
         differ if it was negotiated between the
         Entity and the Peer. Values may or may not
         be negotiated. For example, if the values
         are the same then no negotiation takes place.
         If they are negotiated, then they may differ."
    INDEX       { prvtcrldpSigIndex, mplsLdpEntityLdpId, 
                  mplsLdpEntityIndex, mplsLdpPeerLdpId }
    ::= { mplsLdpSessionTable 1 }

MplsLdpSessionEntry ::= SEQUENCE {
    mplsLdpSessionStateLastChange               PrvtMplsLdpTimeStamp,
    mplsLdpSessionState                         INTEGER,
    mplsLdpSessionKeepAliveHoldTimeRemaining    PrvtMplsLdpTimeInterval,
    mplsLdpSessionKeepAliveTime                 Unsigned32,
    mplsLdpSessionMaxPduLength                  Unsigned32,
    mplsLdpSessionConfiguredHoldTime            Unsigned32,
    mplsLdpSessionPeerHoldTime                  Unsigned32,
    mplsLdpSessionHoldTimeInUse                 Unsigned32
}

mplsLdpSessionStateLastChange OBJECT-TYPE
    SYNTAX      PrvtMplsLdpTimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The value of sysUpTime at the time this
         Session entered its current state as
         denoted by the mplsLdpSessionState
         object."
    ::= { mplsLdpSessionEntry 1 }

mplsLdpSessionState OBJECT-TYPE
    SYNTAX      INTEGER { nonexistent(1), initialized(2), openrec(3), 
                    opensent(4), operational(5) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The current state of the session, all of the
         states 1 - 5 are based on the state machine
         for session negotiation behavior."
    REFERENCE   
        "RFC3036, LDP Specification, Section 2.5.4,
         Initialization State Machine."
    ::= { mplsLdpSessionEntry 2 }

mplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE
    SYNTAX      PrvtMplsLdpTimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The keep alive hold time remaining for this session in
         units of hundredths of a second. This interval will
         change when the 'next' Keep Alive message which
         corresponds to this session is received. A value of zero
         indicates that the keep alive hold timer is not running."
    ::= { mplsLdpSessionEntry 3 }

mplsLdpSessionKeepAliveTime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The negotiated KeepAlive Time which
         represents the amount of seconds between
         keep alive messages. The
         mplsLdpEntityKeepAliveHoldTimer
         related to this Session is the
         value that was proposed as the
         KeepAlive Time for this session.
         
         This value is negotiated during
         session initialization between
         the entity's proposed value
         (i.e., the value configured in
         mplsLdpEntityKeepAliveHoldTimer)
         and the peer's proposed
         KeepAlive Hold Timer value.
         This value is the smaller
         of the two proposed values."
    REFERENCE   
        "RFC3036, LDP Specification, Section 3.5.3,
         Initialization Message."
    ::= { mplsLdpSessionEntry 4 }

mplsLdpSessionMaxPduLength OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The value of maximum allowable length for LDP PDUs for
         this session. This value may have been negotiated
         during the Session Initialization. This object is
         related to the mplsLdpEntityMaxPduLength object. The
         mplsLdpEntityMaxPduLength object specifies the requested
         LDP PDU length, and this object reflects the negotiated
         LDP PDU length between the Entity and
         the Peer."
    REFERENCE   
        "RFC3036, LDP Specification, Section 3.5.3,
         Initialization Message."
    ::= { mplsLdpSessionEntry 5 }

mplsLdpSessionConfiguredHoldTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The locally configured keepalive hold time for this
         session, in seconds. Note that the value of this field
         reflects configuration at the time of session
         initialization; this may differ from the configuration
         that would apply to a new session, if configuration has
         changed since this session was initialized."
    ::= { mplsLdpSessionEntry 6 }

mplsLdpSessionPeerHoldTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The peer's advertised keepalive hold time for this session
         in seconds. Note that the value of this field reflects
         the peer's configuration at the time of session
         initialization; this may differ from the configuration
         that would apply to a new session, if the peer's
         configuration has changed since this session was
         initialized."
    ::= { mplsLdpSessionEntry 7 }

mplsLdpSessionHoldTimeInUse OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The keepalive hold time that is currently in use for this
         session, in seconds."
    ::= { mplsLdpSessionEntry 8 }

mplsLdpHelloAdjacencyTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MplsLdpHelloAdjacencyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "A table of Hello Adjacencies for Sessions."
    ::= { mplsLdpObjects 4 }

mplsLdpHelloAdjacencyEntry OBJECT-TYPE
    SYNTAX      MplsLdpHelloAdjacencyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each row represents a single LDP Hello Adjacency.
         An LDP Session can have one or more Hello adjacencies."
    INDEX       { prvtcrldpSigIndex, mplsLdpEntityLdpId, 
                  mplsLdpEntityIndex, mplsLdpPeerLdpId, 
                  mplsLdpHelloAdjacencyIndex }
    ::= { mplsLdpHelloAdjacencyTable 1 }

MplsLdpHelloAdjacencyEntry ::= SEQUENCE {
    mplsLdpHelloAdjacencyIndex                  Unsigned32,
    mplsLdpHelloAdjacencyHoldTimeRemaining      PrvtMplsLdpTimeInterval,
    mplsLdpHelloAdjacencyHoldTime               Unsigned32,
    mplsLdpHelloAdjacencyType                   INTEGER,
    mplsLdpHelloAdjacencyConfiguredHoldTime     Unsigned32,
    mplsLdpHelloAdjacencyPeerHoldTime           Unsigned32
}

mplsLdpHelloAdjacencyIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An identifier for this specific adjacency."
    ::= { mplsLdpHelloAdjacencyEntry 1 }

mplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE
    SYNTAX      PrvtMplsLdpTimeInterval
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "If the value of this object is 65535,
         this means that the hold time is infinite
         (i.e., wait forever).
         
         Otherwise, the time remaining for
         this Hello Adjacency to receive its
         next Hello Message.
         
         This interval will change when the 'next'
         Hello Message which corresponds to this
         Hello Adjacency is received unless it
         is infinite."
    ::= { mplsLdpHelloAdjacencyEntry 2 }

mplsLdpHelloAdjacencyHoldTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The Hello hold time which is negotiated between
         the Entity and the Peer. The entity associated
         with this Hello Adjacency issues a proposed
         Hello Hold Time value in the
         mplsLdpEntityHelloHoldTimer object. The peer
         also proposes a value and this object represents
         the negotiated value.
         
         A value of 0 means the default,
         which is 15 seconds for Link Hellos
         and 45 seconds for Targeted Hellos.
         A value of 65535 indicates an
         infinite hold time."
    REFERENCE   
        "RFC3036, LDP Specification, Section 3.5.2 Hello Message"
    ::= { mplsLdpHelloAdjacencyEntry 3 }

mplsLdpHelloAdjacencyType OBJECT-TYPE
    SYNTAX      INTEGER { link(1), targeted(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This adjacency is the result of a 'link'
         hello if the value of this object is link(1).
         Otherwise, it is a result of a 'targeted'
         hello, targeted(2)."
    ::= { mplsLdpHelloAdjacencyEntry 4 }

mplsLdpHelloAdjacencyConfiguredHoldTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The locally configured hello hold time for this adjacency,
         in seconds."
    ::= { mplsLdpHelloAdjacencyEntry 5 }

mplsLdpHelloAdjacencyPeerHoldTime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The peer's advertised hello hold time for this adjacency,
         in seconds."
    ::= { mplsLdpHelloAdjacencyEntry 6 }

mplsLdpSessionPeerAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MplsLdpSessionPeerAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table 'extends' the mplsLdpSessionTable.
         This table is used to store Label Address Information
         from Label Address Messages received by this LSR from
         Peers. This table is read-only and should be updated
         when Label Withdraw Address Messages are received, i.e.,
         Rows should be deleted as appropriate.
         
         NOTE: since more than one address may be contained
         in a Label Address Message, this table 'sparse augments',
         the mplsLdpSessionTable's information."
    ::= { mplsLdpObjects 5 }

mplsLdpSessionPeerAddrEntry OBJECT-TYPE
    SYNTAX      MplsLdpSessionPeerAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in this table represents information on
         a session's single next hop address which was
         advertised in an Address Message from the LDP peer.
         The information contained in a row is read-only."
    INDEX       { prvtcrldpPmIndex, mplsLdpEntityLdpId, 
                  mplsLdpEntityIndex, mplsLdpPeerLdpId, 
                  mplsLdpSessionPeerAddrIndex }
    ::= { mplsLdpSessionPeerAddrTable 1 }

MplsLdpSessionPeerAddrEntry ::= SEQUENCE {
    mplsLdpSessionPeerAddrIndex         Unsigned32,
    mplsLdpSessionPeerNextHopAddrType   InetAddressType,
    mplsLdpSessionPeerNextHopAddr       PrvtMplsLdpInetAddress
}

mplsLdpSessionPeerAddrIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An index which uniquely identifies this entry within
         a given session."
    ::= { mplsLdpSessionPeerAddrEntry 1 }

mplsLdpSessionPeerNextHopAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The internetwork layer address type of this Next Hop
         Address as specified in the Label Address Message
         associated with this Session. The value of this
         object indicates how to interpret the value of
         mplsLdpSessionPeerNextHopAddr."
    ::= { mplsLdpSessionPeerAddrEntry 2 }

mplsLdpSessionPeerNextHopAddr OBJECT-TYPE
    SYNTAX      PrvtMplsLdpInetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The next hop address. The type of this address
         is specified by the value of the
         mplsLdpSessionPeerNextHopAddrType."
    REFERENCE   
        "RFC3036, Section 2.7. LDP Identifiers
         and Next Hop Addresses"
    ::= { mplsLdpSessionPeerAddrEntry 3 }

END -- end of module PRVT-MPLS-LDP-MIB.