path: root/MIBS/telco-systems/binos/PRVT-SYS-MON-MIB

-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-SYS-MON-MIB
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications 
-- and Telco Systems products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.

PRVT-SYS-MON-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, 
		Integer32 ,NOTIFICATION-TYPE
          FROM SNMPv2-SMI       
              
      NOTIFICATION-GROUP
FROM SNMPv2-CONF
   TEXTUAL-CONVENTION
        FROM SNMPv2-TC                                           
		DisplayString    
			FROM SNMPv2-TC
		reportsL2IfaceUnit, reportsL2IfaceSlot,
		reportsL2IfacePort, reportsIfJackIndex,
		prvt-products
	                                     FROM PRVT-SWITCH-MIB;  


    prvtSysMonMib MODULE-IDENTITY
  LAST-UPDATED    "200712270000Z"
        ORGANIZATION "BATM Advanced Communication"
        CONTACT-INFO
        " BATM/Telco Systems Support team
				Email: 
				For North America: techsupport@telco.com
				For North Europe: support@batm.de, info@batm.de
				For the rest of the world: techsupport@telco.com"
       
        DESCRIPTION
                "Information for system resources"

	REVISION 			"200712270000Z"
	DESCRIPTION 
	"Added laser management"
         REVISION     "200502160000Z"
     	 DESCRIPTION
			"Fixed spelling errors and changed the contact info." 

        REVISION     "200311180000Z"
        DESCRIPTION
	"Add new notifications portsCRCErrExceeded, portsRuntsExceeded, 
	portsOverSizeExceeded and support vars for them.
	Change the MAX-ACCESS for all 
	sysMonValues to accessible-for-notify"
        REVISION     "200305130000Z"
        DESCRIPTION
                "Initial version."
            ::= { software 3 }



-------------------------------------------------------------------------------
--     PRIVATE BRANCH  PRODUCTS
-------------------------------------------------------------------------------
    software        OBJECT IDENTIFIER ::= { prvt-products 111 }

----------------------------------------------------------------------------
-- Variable Type definitions
----------------------------------------------------------------------------
	EnableStatus ::= TEXTUAL-CONVENTION
	STATUS       current
	DESCRIPTION
	"enable(1), disable(2)"
	SYNTAX  INTEGER {
		enable(1),
		disable(2)
	}

    prvtSysMonNotifications OBJECT IDENTIFIER ::= { prvtSysMonMib 0 }
    prvtSysMonObjects       OBJECT IDENTIFIER ::= { prvtSysMonMib 1 }
    prvtSysMonConformance   OBJECT IDENTIFIER ::= { prvtSysMonMib 2 }

    sysMonThreshold  OBJECT IDENTIFIER ::= {prvtSysMonObjects 1}
    sysMonValues     OBJECT IDENTIFIER ::= {prvtSysMonObjects 2}
	sysMonConfig		 OBJECT IDENTIFIER ::= {prvtSysMonObjects 3}

    cpuUtilizationThreshold OBJECT-TYPE
        SYNTAX              Integer32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
                "High limit in percent of normal CPU utilization"
        ::= { sysMonThreshold 1 }

    ramBytesFreeThreshold OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
                "Low limit in bytes free in the system memory"
        ::= { sysMonThreshold 2 }

    portErrorsThreshold OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
                "High limit in percent of communication errors on port"
        ::= { sysMonThreshold 3 }

    portsBroadcastThreshold OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
                "High limit in percent of exceeding broadcast-limit on port"
        ::= { sysMonThreshold 4 }

    portsCRCErrThreshold OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
                "High limit in percent of exceeding CRC error on port"
        ::= { sysMonThreshold  5 }

    portsRuntsThreshold OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
                "High limit in percent of exceeding runts on port"
        ::= { sysMonThreshold 6 }

    portsOverSizeThreshold OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        read-only
        STATUS            current
        DESCRIPTION
                "High limit in percent of exceeding over-size on port"
        ::= { sysMonThreshold 7 }

	laserPortThresholdTable OBJECT-TYPE
	SYNTAX SEQUENCE OF LaserPortThresholdEntry
	MAX-ACCESS	not-accessible
	STATUS			current
	DESCRIPTION
	"Defines thresholds for each port in the device"
	::= { sysMonThreshold 8 }

	laserPortThresholdEntry OBJECT-TYPE
	SYNTAX LaserPortThresholdEntry
	MAX-ACCESS	not-accessible
	STATUS			current
	DESCRIPTION
	""
	INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot,	reportsL2IfacePort, reportsIfJackIndex}
	::= { laserPortThresholdTable 1 }

	LaserPortThresholdEntry ::= SEQUENCE {
		laserTemperatureHighThreshold		Integer32,
		laserTemperatureLowThreshold   	Integer32,
		laserTxPowerHighThreshold      	Integer32,
		laserTxPowerLowThreshold       	Integer32,
		laserRxPowerHighThreshold    		Integer32,
		laserRxPowerLowThreshold				Integer32
	}

	laserTemperatureHighThreshold OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configures high temperature threshold. The range is -128 to 128. The accuracy is 1C."
	::= { laserPortThresholdEntry 1  }

	laserTemperatureLowThreshold OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configures low temperature threshold. The range is -128 to 128. The accuracy is 1C."
	::= { laserPortThresholdEntry 2  }

	laserTxPowerHighThreshold OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configures Tx power high threshold. The range is -40 to 8."
	::= { laserPortThresholdEntry 3  }

	laserTxPowerLowThreshold OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configures Tx power low threshold. The range is -40 to 8."
	::= { laserPortThresholdEntry 4  }

	laserRxPowerHighThreshold OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configures Rx power high threshold. The range is -40 to 8."
	::= { laserPortThresholdEntry 5  }

	laserRxPowerLowThreshold OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	"Configures Rx power low threshold. The range is -40 to 8."
	::= { laserPortThresholdEntry 6  }

    monCpuUtilization  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "The current level in percent of CPU utilization"
        ::= { sysMonValues 1 }

    monRamBytesFree   OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS accessible-for-notify
        STATUS     current
        DESCRIPTION
                "The number of bytes currently free in the system memory"
        ::= { sysMonValues 2 }

    monPortsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF MonPortsEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
            "Defines the ports monitor Table for providing, via SNMP, the
             last sampled parameters by the periodic monitor"
	::= { sysMonValues 3 }

    monPortsEntry OBJECT-TYPE
        SYNTAX MonPortsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
           "Defines an entry in the monPortsTable. The entries are indexed by
            the physical location of the port in the device."
        INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot, reportsL2IfacePort }
        ::= { monPortsTable 1 }

    MonPortsEntry ::= SEQUENCE {
        monPortErrors      Integer32,
        monPortBroadcast   Integer32,
        monPortCRCErr      Integer32,
        monPortRunts       Integer32,
        monPortOverSize    Integer32
    }

   monPortErrors      OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS accessible-for-notify
        STATUS     current
        DESCRIPTION
                "The percentages of errors on the port that generated the notification."
        ::= { monPortsEntry 1  }

   monPortBroadcast  OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS accessible-for-notify
        STATUS     current
        DESCRIPTION
                "The percentages of packets exceeding broadcast-limit on the port that generated the notification."
        ::= { monPortsEntry 2  }

   monPortCRCErr OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        accessible-for-notify
        STATUS            current
        DESCRIPTION
                "The percentage of CRC errors on the port that generated the notification."
        ::= { monPortsEntry  3 }

   monPortRunts OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        accessible-for-notify
        STATUS            current
        DESCRIPTION
                "The percentage of runt packets on the port that generated the notification."
        ::= { monPortsEntry 4 }

   monPortOverSize OBJECT-TYPE
        SYNTAX            Integer32
        MAX-ACCESS        accessible-for-notify
        STATUS            current
        DESCRIPTION
                "The percentage of over-size packets on the port that generated the notification."
        ::= { monPortsEntry 5 }

	laserPortValueTable OBJECT-TYPE
	SYNTAX SEQUENCE OF LaserPortValueEntry
	MAX-ACCESS 	not-accessible
	STATUS 			current
	DESCRIPTION
	"This table displays the current laser-related values for each port in the device."
	::= { sysMonValues 4 }

	laserPortValueEntry OBJECT-TYPE
	SYNTAX LaserPortValueEntry
	MAX-ACCESS 	not-accessible
	STATUS 			current
	DESCRIPTION
	""
	INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot, reportsL2IfacePort, reportsIfJackIndex }
	::= { laserPortValueTable 1 }

	LaserPortValueEntry ::= SEQUENCE {
		sfpStatus      		INTEGER,
		laserTemperature  Integer32,
		laserTxPower      Integer32,
		laserRxPower      Integer32
	}

	sfpStatus      OBJECT-TYPE
	SYNTAX     INTEGER {
		lm-supported(1),
		lm-not-supported(2),
		extracted(3)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	"If value of this field is not supported, then 
	the values of other fields are not relevant. 
	The value is supported only if SFP compliant 
	with SFF-8472 is inserted."
	::= { laserPortValueEntry 1 }

	laserTemperature      OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	"Represents module temperature.
	The range is -128 to 128. The accuracy is 1C."
	::= { laserPortValueEntry 2 }

	laserTxPower OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	"Represents Tx power. The range is -40 to 8."
	::= { laserPortValueEntry 3 }

	laserRxPower OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	"Represents Rx power. The range is -40 to 8."
	::= { laserPortValueEntry 4 }

     cpuUtilizationExceeded NOTIFICATION-TYPE
         OBJECTS { monCpuUtilization, cpuUtilizationThreshold}
         STATUS  current
         DESCRIPTION
			"The cpuUtilizationExceeded notification indicates that the sending
			 agent sense that the CPU utilization has passed the
			 program threshold."
	     ::= {prvtSysMonNotifications 1}

     ramFreeSpaceExceeded NOTIFICATION-TYPE
         OBJECTS { monRamBytesFree, ramBytesFreeThreshold}
         STATUS  current
         DESCRIPTION
            "The ramFreeSpaceExceeded notification indicates that the sending
             agent sense that the system memory utilization has passed the
             program threshold."
	::= {prvtSysMonNotifications 2}

     portErrorsExceeded NOTIFICATION-TYPE
         OBJECTS { monPortErrors, portErrorsThreshold}
         STATUS  current
         DESCRIPTION
            "The portErrorsExceeded notification indicates that the sending
             agent sense that the level of errors on the port
             has passed the program threshold."
	::= {prvtSysMonNotifications 3}

     portsBroadcastExceeded NOTIFICATION-TYPE
         OBJECTS { monPortBroadcast, portsBroadcastThreshold}
         STATUS  current
         DESCRIPTION
            "The portsBroadcastExceeded notification indicates that the sending
             agent sense that the level of broadcast-limit has passed the
             program threshold."
	::= {prvtSysMonNotifications 4}

     portsCRCErrExceeded NOTIFICATION-TYPE
         OBJECTS { monPortCRCErr, portsCRCErrThreshold}
         STATUS  current
         DESCRIPTION
            "The portsCRCErrExceeded notification indicates that the sending
             agent sense that the level of CRC error has passed the
             program threshold."
	::= {prvtSysMonNotifications 5}

     portsRuntsExceeded NOTIFICATION-TYPE
         OBJECTS { monPortRunts, portsRuntsThreshold}
         STATUS  current
         DESCRIPTION
	   "The portsRuntsExceeded notification indicates that the sending
            agent sense that the level of runts has passed the
            program threshold."
	 ::= {prvtSysMonNotifications 6}

     portsOverSizeExceeded NOTIFICATION-TYPE
         OBJECTS { monPortOverSize, portsOverSizeThreshold}
         STATUS  current
         DESCRIPTION
	   "The portsOverSizeExceeded notification indicates that the sending
            agent sense that the level of oversize has passed the
            program threshold."
     ::= {prvtSysMonNotifications 7}

	laserTemperatureThresholdCrossed NOTIFICATION-TYPE
				OBJECTS { laserTemperature, laserTemperatureHighThreshold, laserTemperatureLowThreshold }
				STATUS  current
			DESCRIPTION
					"The laserTemperatureThresholdCrossed shall be generated 
					when laserTemperature rises above laserHighTemperatureThreshold 
					or falls below laserTemperatureLowThreshold. Also the 
					notification shall be generated when laserTemperature
				 	returns to the normal range between laserHighTemperatureThreshold 
					and laserTemperatureLowThreshold."
					::= { prvtSysMonNotifications 8 }

				laserTxPowerThresholdCrossed NOTIFICATION-TYPE
				OBJECTS { laserTxPower, laserTxPowerHighThreshold, laserTxPowerLowThreshold }
				STATUS  current
				DESCRIPTION
							"The laserTxPowerThresholdCrossed shall be generated
							when laserTxPower rises above laserHighTxPowerThreshold
							or falls below laserTxPowerLowThreshold. Also the 
							notification shall be generated when laserTxPower 
							returns to the normal range between 
							laserHighTxPowerThreshold and laserTxPowerLowThreshold."
				::= { prvtSysMonNotifications 9 }
  			
				laserRxPowerThresholdCrossed NOTIFICATION-TYPE
				OBJECTS { laserRxPower, laserRxPowerHighThreshold, laserRxPowerLowThreshold }
				STATUS  current
				DESCRIPTION
							"The laserRxPowerThresholdCrossed shall be generated 
							when laserRxPower rises above laserHighRxPowerThreshold 
							or falls below laserRxPowerLowThreshold. Also the 
							notification shall be generated when laserRxPower 
							returns to the normal range between 
							laserHighRxPowerThreshold and laserRxPowerLowThreshold."
				::= { prvtSysMonNotifications 10 }
			sfpMonStatusChanged NOTIFICATION-TYPE
				OBJECTS { sfpMonStatus }
				STATUS  current
				DESCRIPTION 
				"This trap will be send only if the SFP is inserted or extracted"							
				::= { prvtSysMonNotifications 11 }
sfpPortManTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SfpPortManEntry
	MAX-ACCESS 	not-accessible
	STATUS 			current
	DESCRIPTION
	"This table  will be responsible for managing SFPs."
	::= { sysMonValues 5 }

	sfpPortManEntry OBJECT-TYPE
	SYNTAX SfpPortManEntry
	MAX-ACCESS 	not-accessible
	STATUS 			current
	DESCRIPTION
	""
	INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot, reportsL2IfacePort, reportsIfJackIndex }
	::= { sfpPortManTable 1 }

	  SfpPortManEntry ::= SEQUENCE {
		sfpMonStatus      		INTEGER,
		sfpVendor				DisplayString,
		sfpPN      				DisplayString,
		sfpRevision       DisplayString,
		sfpLenght					DisplayString,
		sfpConnector			DisplayString
	}

	sfpMonStatus      OBJECT-TYPE
	SYNTAX     INTEGER {
		sfpInserted (1),
		sfpExtracted (2),
		sfpUnknown    (3)		
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	"This object gives information is SFP is inserted or not in the port."
	::= { sfpPortManEntry 1 }
	
	sfpVendor      OBJECT-TYPE
	SYNTAX          DisplayString (SIZE(0..9))
  MAX-ACCESS      read-only
  STATUS          current
  DESCRIPTION     "This object gives SFP vendor name."
  DEFVAL          { ''H }
    ::= { sfpPortManEntry 2 }
    
  sfpPN      OBJECT-TYPE
	SYNTAX          DisplayString (SIZE(0..9))
  MAX-ACCESS      read-only
  STATUS          current
  DESCRIPTION     "This object gives SFP vendor name."
  DEFVAL          { ''H }
    ::= { sfpPortManEntry 3 }
    
  sfpRevision      OBJECT-TYPE
	SYNTAX          DisplayString (SIZE(0..9))
  MAX-ACCESS       read-only
  STATUS          current
  DESCRIPTION     "This object gives SFP vendor revision."
  DEFVAL          { ''H }
    ::= { sfpPortManEntry 4 }  
  
  sfpLenght     OBJECT-TYPE
	SYNTAX          DisplayString (SIZE(0..9))
  MAX-ACCESS      read-only
  STATUS          current
  DESCRIPTION     "This object gives information regarding link length."
  DEFVAL          { ''H }
    ::= { sfpPortManEntry 5 }
    
  sfpConnector      OBJECT-TYPE
	SYNTAX          DisplayString (SIZE(0..9))
  MAX-ACCESS      read-only
  STATUS          current
  DESCRIPTION     "This object gives SFP connector type."
  DEFVAL          { ''H }
    ::= { sfpPortManEntry 6 } 

------------------------------------------------------------------------
---------------------------sysMonConfig---------------------------------
------------------------------------------------------------------------

	sysMonConfigTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SysMonConfigEntry
	MAX-ACCESS 	not-accessible
	STATUS 			current
	DESCRIPTION
	"This table configures periodic monitoring parameters."
	::= { sysMonConfig 1 }

	sysMonConfigEntry OBJECT-TYPE
	SYNTAX SysMonConfigEntry
	MAX-ACCESS 	not-accessible
	STATUS 			current
	DESCRIPTION
	""
	INDEX { sysMonIndicator }
	::= { sysMonConfigTable 1 }

	SysMonConfigEntry ::= SEQUENCE {
		sysMonIndicator	INTEGER,
		sysMonEnable		EnableStatus,
		sysMonPeriod		Integer32,
		sysMonTrap      EnableStatus,
		sysMonLog       EnableStatus,
		sysMonLed    		EnableStatus,
		sysMonDefaults	INTEGER
	}

	sysMonIndicator      OBJECT-TYPE
	SYNTAX     INTEGER {
		cpu-usage(1),
		ram-usage(2),
		power-supply(3),
		onboard-power(4),
		fan(5),
		temperature(6),
		laser(7)
	}
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	"Enumeration."
	::= { sysMonConfigEntry 1 }

	sysMonEnable OBJECT-TYPE
	SYNTAX 			EnableStatus
	MAX-ACCESS	read-write
	STATUS 			current
	DESCRIPTION
	"Enabled/disabled"
	::= { sysMonConfigEntry 2 }

	sysMonPeriod OBJECT-TYPE
	SYNTAX 			Integer32
	MAX-ACCESS	read-write
	STATUS 			current
	DESCRIPTION
	"Configure monitoring period in seconds."
	::= { sysMonConfigEntry 3 }

	sysMonTrap OBJECT-TYPE
	SYNTAX 			EnableStatus
	MAX-ACCESS	read-write
	STATUS 			current
	DESCRIPTION
	"Enabled/disabled"
	::= { sysMonConfigEntry 4 }

	sysMonLog OBJECT-TYPE
	SYNTAX 			EnableStatus
	MAX-ACCESS	read-write
	STATUS 			current
	DESCRIPTION
	"Enabled/disabled"
	::= { sysMonConfigEntry 5 }

	sysMonLed OBJECT-TYPE
	SYNTAX 			EnableStatus
	MAX-ACCESS	read-write
	STATUS 			current
	DESCRIPTION
	"Enabled/disabled"
	::= { sysMonConfigEntry 6 }

	sysMonDefaults OBJECT-TYPE
	SYNTAX 			INTEGER {
		noop(0),
		reset(1)
	}
	MAX-ACCESS	read-write
	STATUS 			current
	DESCRIPTION
	"If set to 1, resets all configurations to defaults."
	DEFVAL { noop }
	::= { sysMonConfigEntry 7 }

---*******************************************************************
--------------Conformance Information---------------------------------
---*******************************************************************

    sysMonMIBGroups       OBJECT IDENTIFIER ::= { prvtSysMonConformance 2 }


    sysMonNotificationGroup NOTIFICATION-GROUP
    	NOTIFICATIONS {
    		cpuUtilizationExceeded,
    		ramFreeSpaceExceeded,
		portErrorsExceeded,
		portsBroadcastExceeded,
		portsCRCErrExceeded,
		portsRuntsExceeded,
		portsOverSizeExceeded
    	}
	STATUS current
     	DESCRIPTION
        	"Private Notification Group."
     ::= { sysMonMIBGroups 3 }


END