path: root/MIBS/telco-systems/binos/PRVT-PW-TDM-MIB

-- *********************************************************************
-- *********************************************************************
-- ** Filename: PRVT-PW-TDM-MIB
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications.
-- BATM Advanced Communications retains all title and
-- ownership in the Specification, including any revisions.

-- BATM Advanced Communications grants all interested parties a non-exclusive
-- license to use and distribute an unmodified copy of this
-- Specification in connection with management of BATM Advanced Communications 
-- and Telco Systems products, and without fee, provided that the following
-- conditions are met:
-- 1. Redistributions of this specification must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
-- or promote products derived from this specification without specific prior written
-- permission.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
PRVT-PW-TDM-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Unsigned32,
Gauge32,
IpAddress
FROM SNMPv2-SMI

MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF

TEXTUAL-CONVENTION,
TruthValue,
RowStatus,
StorageType,
TimeStamp
FROM SNMPv2-TC

NOTIFICATION-TYPE, transmission
          FROM SNMPv2-SMI                    -- [RFC2578]

InterfaceIndexOrZero
FROM IF-MIB

PerfCurrentCount,
PerfIntervalCount
FROM PerfHist-TC-MIB
 
PortList
FROM Q-BRIDGE-MIB
 
switch FROM PRVT-SWITCH-MIB; 
 
 

-- The TDM MIB

prvtPwVcTDMMIB MODULE-IDENTITY

LAST-UPDATED "200907070000Z"
ORGANIZATION "BATM Advanced Communication"
CONTACT-INFO
"BATM/Telco Systems Support team
Email: 
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"

DESCRIPTION
"This MIB contains managed object definitions for
encapsulating TDM (T1,E1, T3, E3, NxDS0) as
pseudo-wires over packet-switching networks (PSN)."

-- revision history       
REVISION "201902270000Z"
DESCRIPTION
"Update interval values for :
 prvtPwVcTDMCfgPeerPort
 prvtPwVcTDMCfgLocalPort
 prvtPwVcTDMCfgOosPort
 prvtPwVcTDMCfgPeerOosPort"
 
REVISION "200907070000Z"
DESCRIPTION
"Change the range for prvtPwVcTDMCfgChannelGroup in order 
to support all configurable channels group  for OC3 module" 

REVISION "200907010000Z"
DESCRIPTION
"Added prvtPwVcTDMCfgRtpOosPayload and prvtPwVcTDMCfgRtpPayload objects." 

  
REVISION "200903060000Z"
DESCRIPTION
"Added MPLS objects." 


REVISION "200903050000Z"
DESCRIPTION
"Added Destination Oos Port "  


REVISION "200902180000Z"
DESCRIPTION
"Added prvtPwVcTDMCfgIpTos, prvtPwVcTDMCfgIpOosTos"  
 
REVISION "200901150000Z"
DESCRIPTION
"Added prvtPwVcTDMCfgInterface, prvtTDMChannelGrpOC3TimeSlots"         

REVISION "200806190000Z" 
DESCRIPTION
"Added prvtPwVcTDMClearCircuitStatistics, prvtPwVcTDMCfgRtp,
prvtPwVcTDMCfgOosPort, prvtPwVcTDMCfgPayloadSuppression"

REVISION "200607240000Z" 
DESCRIPTION
"Added Oos Ecid and Vlan priotity objects."

::= { prvtPwVc 2 } 

prvtPwVc OBJECT IDENTIFIER ::= { switch 200 }

-- Local Textual conventions
PrvtPwVcTDMCfgIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Index into any of the relevant prvtPwVcXXXCfgTable."
SYNTAX Unsigned32 

TimeSlotList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a time slot included
in the give channel group. There should be 32 bits of 4 octets for each 
port of the CES module. Note that if the line type is set to T1 only
the first 24 bits of each 4 octests can be set. The most significant bit 
of the list indicates timeslot 1 of port 1, the 33th bit - timeslot 1 of port 2, etc.
If the bit is set, the port is included in the given channel group."
SYNTAX OCTET STRING
 
PrvtPwVcTDMCfgInterface ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Interface of the given circuit used in TDM config for OC3 modules " 
SYNTAX IpAddress


InterfaceTimeSlot ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The first 4 octets of this value represent the interface of 
the given channel group P.K.L.M.The last 32 bits of the
4 octets represent a bitmask of the time slots"
SYNTAX OCTET STRING

-- Tables, Scalars
prvtPwVcTDMObjects OBJECT IDENTIFIER
::= { prvtPwVcTDMMIB 1 }
-- Notifications
prvtPwVcTDMTraps OBJECT IDENTIFIER
::= { prvtPwVcTDMMIB 2 }

-- Conformance
prvtPwVcTDMConformance OBJECT IDENTIFIER
::= { prvtPwVcTDMMIB 3 }

-- TDM PW table

prvtPwVcTDMTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtPwVcTDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains basic information including ifIndex,
and pointers to entries in the relevant TDM config
tables for this TDM PW."
::= { prvtPwVcTDMObjects 1 }

prvtPwVcTDMEntry OBJECT-TYPE
SYNTAX PrvtPwVcTDMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is indexed by the same index that was
created for the associated entry in the PW Table
(in the PW-STD-MIB).
An entry is created in this table by the agent for every
entry in the prvtPwVcTable with a prvtPwVcType of 'TDM'."

INDEX { prvtPwVcTDMModuleId, prvtPwVcTDMCircuitId }

::= { prvtPwVcTDMTable 1 }

PrvtPwVcTDMEntry ::= SEQUENCE {
prvtPwVcTDMModuleId INTEGER, 
prvtPwVcTDMCircuitId INTEGER, 
prvtPwVcTDMType INTEGER,
prvtPwVcRelTDMCfgIndex PrvtPwVcTDMCfgIndex,
prvtPwVcTDMTimeElapsed Integer32,
prvtPwVcTDMValidIntervals Integer32,
prvtPwVcTDMCurrentIndications BITS,
prvtPwVcTDMLatchedIndications BITS,
prvtPwVcTDMLastEsTimeStamp TimeStamp,
prvtPwVcTDMEmulationMode INTEGER,
prvtPwVcTDMOperStatus INTEGER,
prvtPwVcTDMClearCircuitStatistics INTEGER
} 
prvtPwVcTDMModuleId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current 
DESCRIPTION 
"The ID of the CES Module where the crcuit is configured. "
::= { prvtPwVcTDMEntry 1 } 

prvtPwVcTDMCircuitId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current 
DESCRIPTION 
"The ID of the CES Circuit that this PW represents. "
::= { prvtPwVcTDMEntry 2 } 

prvtPwVcTDMType OBJECT-TYPE
SYNTAX INTEGER {

other (1),
ds1 (2),
e1 (3),
ds3 (4),
e3 (5),
octetAlignedT1 (6),
nXds0 (7),
nXds0WithCASe1 (8),
nXds0WithCASds1Esf (9),
nXds0WithCASds1Sf (10)

}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of TDM PW. The connection assumed to be
symmetrical having the same value at both ends. To identify
structured vs. unstructured type for DS1 and E1, dsx1LineType
and dsx1SignalMode [DS1MIB] should be referenced. DS3 and E3
are always unstructured. "
DEFVAL { e1 }
::= { prvtPwVcTDMEntry 3 }

prvtPwVcRelTDMCfgIndex OBJECT-TYPE
SYNTAX PrvtPwVcTDMCfgIndex
MAX-ACCESS read-only 
STATUS current
DESCRIPTION
"Index to the relevant TDM configuration table entry
that appears in one of the related MIB modules
such as SAToP,TDMoIP or CESoPSN. It is likely that
multiple TDM PWs of the same characteristic will share
a single configuration entry of the relevant type."
::= { prvtPwVcTDMEntry 4 }

prvtPwVcTDMTimeElapsed OBJECT-TYPE
SYNTAX Integer32 (1..900)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the
current interval exceeds the maximum value, the
agent will return the maximum value."
::= { prvtPwVcTDMEntry 5}

prvtPwVcTDMValidIntervals OBJECT-TYPE
SYNTAX Integer32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous 15-minute intervals for which data
was collected.
An agent with TDM capability must be capable of supporting
at least n intervals. The minimum value of n is 4, The
default of n is 32 and the maximum value of n is 96.
The value will be <n> unless the measurement was (re-)
started within the last (<n>*15) minutes, in which case
the value will be the number of complete 15 minute
intervals for which the agent has at least some data.
In certain cases(e.g., in the case where the agent is
a proxy) it is possible that some intervals are unavailable.
In this case, this interval is the maximum interval number
for which data is available. "
::= { prvtPwVcTDMEntry 6}

prvtPwVcTDMCurrentIndications OBJECT-TYPE
SYNTAX BITS {
other ( 0),
strayPacket ( 1),
malformedPacket ( 2),
excessivePktLossRate( 3),
bufferOverrun ( 4),
bufferUnderrun ( 5),
remotePktLoss ( 6),
packetLoss ( 7),
tdmFault ( 8),
packetsLbitCounter ( 9),
packetsRbitCounter (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The following defects should be detected and reported
upon request:

-Stray packets MAY be detected by the PSN and multiplexing
layers. Stray packets MUST be discarded by the CE-bound IWF
and their detection MUST NOT affect mechanisms for detection
of packet loss.

-Malformed packets are detected by mismatch between the
expected packet size (taking the value of the L bit into
account) and the actual packet size inferred from the PSN and
multiplexing layers. Malformed in-order packets MUST be
discarded by the CE-bound IWF and replacement data generated
as for lost packets.

-Excessive packet loss rate is detected by computing the
average packet loss rate over the value of
prvtPwVcTDMAvePktLossTimeWindow and comparing it with a
preconfigured threshold [SATOP].

-Buffer overrun is detected in the normal operation state
when the CE bound IWF's jitter buffer cannot accommodate
newly arrived packets.

-Remote packet loss is indicated by reception of packets with
their R bit set.

-Packet misorder is detected by looking at the Sequence
number provided by the control word.

-TDM Fault, if L bit in the control word is set, it indicates
that TDM data carried in the payload is invalid due an
attachment circuit fault. When the L bit is set the payload
MAY be omitted in order to conserve bandwidth.

Note: the algorithm used to capture these indications
is implementation specific."
::= { prvtPwVcTDMEntry 7}

prvtPwVcTDMLatchedIndications OBJECT-TYPE
SYNTAX BITS {
other ( 0),
staryPacket ( 1),
malformedPacket ( 2),
excessivePktLossRate( 3),
bufferOverrun ( 4),
bufferUnderrun ( 5),
remotePktLoss ( 6),
packetLoss ( 7),
tdmFault ( 8),
packetsLbitCounter ( 9),
packetsRbitCounter (10)
}

MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOPS are
useful, all are latched here. For bit definitions, see
prvtPwVcTDMCurrentIndications above.

Note: the algorithm used to latch these indications when
entering an defect state is implementation specific."
::= { prvtPwVcTDMEntry 8}

prvtPwVcTDMLastEsTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which the TDM PW entered the ES or SES state."
::= { prvtPwVcTDMEntry 9} 

prvtPwVcTDMEmulationMode OBJECT-TYPE
SYNTAX INTEGER
{
undefined ( 0),
structured ( 1),
unstuctured ( 2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The circuit emulation mode."

::= {prvtPwVcTDMEntry 10 } 

prvtPwVcTDMOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the circuit."

::= {prvtPwVcTDMEntry 11 } 

prvtPwVcTDMClearCircuitStatistics OBJECT-TYPE
SYNTAX INTEGER {
none ( 0 ),
clear ( 1 )
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear circuit statistics."
::= {prvtPwVcTDMEntry 12 }



-- End of TDM PW table

-- PW Generic TDM PW Configuration Table

prvtPwVcTDMCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtPwVcTDMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a set of parameters that may be
referenced by one or more TDM PWs in prvtPwVcTDMTable."

::= { prvtPwVcTDMObjects 3 }

prvtPwVcTDMCfgEntry OBJECT-TYPE
SYNTAX PrvtPwVcTDMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These parameters define the characteristics of a
TDM PW. They are grouped here to ease NMS burden.
Once an entry is created here it may be re-used
by many PWs."

INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId }

::= { prvtPwVcTDMCfgTable 1 }

PrvtPwVcTDMCfgEntry ::= SEQUENCE { 
prvtPwVcTDMCfgPayloadSize Unsigned32,
prvtPwVcTDMCfgPktReorder TruthValue,
prvtPwVcTDMCfgRtpHdrUsed TruthValue,
prvtPwVcTDMCfgJtrBfrDepth Unsigned32,
prvtPwVcTDMCfgChannelGroup INTEGER,
prvtPwVcTDMCfgPorts OCTET STRING,
prvtPwVcTDMCfgPeerIpType INTEGER,
prvtPwVcTDMCfgPeerIpAddress IpAddress,
prvtPwVcTDMCfgPeerPort INTEGER, 
prvtPwVcTDMCfgPeerMAC OCTET STRING, 
prvtPwVcTDMCfgPeerEcid INTEGER,
prvtPwVcTDMCfgPeerOosEcid INTEGER,
prvtPwVcTDMCfgVlanId INTEGER, 
prvtPwVcTDMCfgVlanPrio INTEGER, 
prvtPwVcTDMCfgLocalPort INTEGER, 
prvtPwVcTDMCfgEcid INTEGER,
prvtPwVcTDMCfgOosEcid INTEGER,
prvtPwVcTDMCfgProtocol INTEGER, 
prvtPwVcTDMCfgAdminStatus INTEGER,
prvtPwVcTDMCfgRowStatus RowStatus,    
prvtPwVcTDMCfgRtp INTEGER,
prvtPwVcTDMCfgOosPort Unsigned32,
prvtPwVcTDMCfgPayloadSuppression INTEGER,
prvtPwVcTDMCfgInterface PrvtPwVcTDMCfgInterface,
prvtPwVcTDMCfgIpTos INTEGER,
prvtPwVcTDMCfgIpOosTos INTEGER,
prvtPwVcTDMCfgPeerOosPort INTEGER,
prvtPwVcTDMCfgMplsLocalLabel Unsigned32,
prvtPwVcTDMCfgMplsPeerLabel Unsigned32,
prvtPwVcTDMCfgMplsTTL INTEGER,  
prvtPwVcTDMCfgMplsExp INTEGER,    
prvtPwVcTDMCfgMplsOosLocalLabel Unsigned32,
prvtPwVcTDMCfgMplsOosPeerLabel Unsigned32,      
prvtPwVcTDMCfgMplsOosTTL INTEGER,
prvtPwVcTDMCfgMplsOosExp INTEGER   ,
prvtPwVcTDMCfgRtpOosPayload INTEGER,
prvtPwVcTDMCfgRtpPayload INTEGER

}

prvtPwVcTDMCfgPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates the PayLoad Size to
be defined during the PW setUp. Upon TX, implementation
must be capable of carrying that amount of data.
Upon RX, When the LEN field is set to 0, the payload of
packet MUST assume this size, and if the actual
packet size is inconsistent with this length,
the packet MUST be considered to be malformed. "
::= { prvtPwVcTDMCfgEntry 1 }

prvtPwVcTDMCfgPktReorder OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set True: as CE bound packets are queued in the
jitter buffer, out of order packets are re-ordered. The
maximum sequence number differential (i.e., the range in
which re-sequencing can occur) is dependant on the depth
of the jitter buffer. See prvtPwVcTDMCfgJtrBfrDepth.

NOTE: Some implementations may not support this feature.
The agent is then required to set this False."
::= { prvtPwVcTDMCfgEntry 2 }

prvtPwVcTDMCfgRtpHdrUsed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set False: an RTP header is not pre-pended to the
TDM packet."
REFERENCE
"See [SATOP]"
DEFVAL { false }

::= { prvtPwVcTDMCfgEntry 3 }

prvtPwVcTDMCfgJtrBfrDepth OBJECT-TYPE
SYNTAX Unsigned32 (1..200)
UNITS "millisecond"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The size of the Jitter buffer SHOULD be defined to
a value that is capable to allow accommodation to the
PSN-specific packet delay variation.

If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'prvtPwVcTDMConfigError '

NOTE: jitter buffers are a limited resource to
be managed."
DEFVAL { 3 }

::= { prvtPwVcTDMCfgEntry 4 }



prvtPwVcTDMCfgChannelGroup OBJECT-TYPE
SYNTAX INTEGER  (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The circuit's channel group. This object is only valid if structured emulation mode is used.
If a group is not set the value of the object is 0."

::= { prvtPwVcTDMCfgEntry 5 } 

prvtPwVcTDMCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A bitmap of themodule's TDM ports belongng to the circuit. "
::= { prvtPwVcTDMCfgEntry 6 } 

prvtPwVcTDMCfgPeerIpType OBJECT-TYPE
SYNTAX INTEGER 
{
ipv4(4),
ipv6(6),
dns(16)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the peer's IP address. "
::= { prvtPwVcTDMCfgEntry 7 }

prvtPwVcTDMCfgPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer's IP address. "
::= { prvtPwVcTDMCfgEntry 8 } 

prvtPwVcTDMCfgPeerPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The connection port. "
::= { prvtPwVcTDMCfgEntry 9 } 

prvtPwVcTDMCfgPeerMAC OBJECT-TYPE
SYNTAX OCTET STRING 
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Peer MAC address. This object is only valid for Metro-Ethernet and Mpls circuits.
If an IP address is configured for the circuit, this object will display
the resolved MAC address."
::= { prvtPwVcTDMCfgEntry 10 } 

prvtPwVcTDMCfgPeerEcid OBJECT-TYPE
SYNTAX INTEGER 
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. "
::= { prvtPwVcTDMCfgEntry 11 } 

prvtPwVcTDMCfgPeerOosEcid OBJECT-TYPE
SYNTAX INTEGER 
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer circuit identifier for the out-of-band signaling. This value is valid only when the object
prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet"
::= { prvtPwVcTDMCfgEntry 12 } 

prvtPwVcTDMCfgVlanId OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The circuit Vlan ID. "
::= { prvtPwVcTDMCfgEntry 13 } 

prvtPwVcTDMCfgVlanPrio OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prioirty for the VLAN set here, when the protocol for the circuit is metro-ethernet"
::= { prvtPwVcTDMCfgEntry 14 } 

prvtPwVcTDMCfgLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Local UDP port. "
::= { prvtPwVcTDMCfgEntry 15 } 


prvtPwVcTDMCfgEcid OBJECT-TYPE
SYNTAX INTEGER 
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. "
::= { prvtPwVcTDMCfgEntry 16 } 

prvtPwVcTDMCfgOosEcid OBJECT-TYPE
SYNTAX INTEGER 
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local circuit identifier for the out-of-band signaling. This value is valid only when the object
prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet"
::= { prvtPwVcTDMCfgEntry 17 } 

prvtPwVcTDMCfgProtocol OBJECT-TYPE
SYNTAX INTEGER 
{
undefined(0),
satop(1),
cesopsn(2),
metro-ethernet(3),
mpls (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The emulation protocol."
::= { prvtPwVcTDMCfgEntry 18 } 

prvtPwVcTDMCfgAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative status of the circuit."
::= { prvtPwVcTDMCfgEntry 19 }


prvtPwVcTDMCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to create and destroy TDM circuits."
::= { prvtPwVcTDMCfgEntry 20 }   


prvtPwVcTDMCfgRtp OBJECT-TYPE
SYNTAX INTEGER {
true ( 1 ),
false ( 2 )
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TRTP header."
::= { prvtPwVcTDMCfgEntry 21 } 


prvtPwVcTDMCfgOosPort OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Oos port."
::= { prvtPwVcTDMCfgEntry 22 } 



prvtPwVcTDMCfgPayloadSuppression OBJECT-TYPE
SYNTAX INTEGER {
enable ( 1 ),
disable ( 2 )
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls payload suppression. Object does not require module to be restarted."
::= { prvtPwVcTDMCfgEntry 23 } 


prvtPwVcTDMCfgInterface   OBJECT-TYPE 
SYNTAX PrvtPwVcTDMCfgInterface 
MAX-ACCESS  read-create
STATUS current
DESCRIPTION
"Interface used for configuring OC3 TDM circuits 
P - Port Number, K,L,M standard numbering of SONET/SDH."
::= {prvtPwVcTDMCfgEntry 24}      


prvtPwVcTDMCfgIpTos		OBJECT-TYPE 
SYNTAX	INTEGER  (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set/Show IP TOS information" 
::= { prvtPwVcTDMCfgEntry 25 }    


prvtPwVcTDMCfgIpOosTos	OBJECT-TYPE 
SYNTAX	INTEGER  (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set/Show IP Out Of Stream information" 
::= { prvtPwVcTDMCfgEntry 26 }    
 
 
prvtPwVcTDMCfgPeerOosPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to SET Destination Oos Port"
::= { prvtPwVcTDMCfgEntry 27 } 


prvtPwVcTDMCfgMplsLocalLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local circuit identifier. This object is only valid if the Circuit protocol is MPLS "  
DEFVAL { 15 }
::= { prvtPwVcTDMCfgEntry 28 }

prvtPwVcTDMCfgMplsPeerLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer circuit identifier. This object is only valid if the Circuit protocol is MPLS "
DEFVAL { 15 }
::= { prvtPwVcTDMCfgEntry 29 }        

prvtPwVcTDMCfgMplsTTL OBJECT-TYPE
SYNTAX INTEGER (2..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS TTL "   
DEFVAL { 255 }
::= { prvtPwVcTDMCfgEntry 30 }               

prvtPwVcTDMCfgMplsExp OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS EXP " 
DEFVAL { 0 }
::= { prvtPwVcTDMCfgEntry 31 }

prvtPwVcTDMCfgMplsOosLocalLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local circuit identifier  for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS "
DEFVAL { 255 }
::= { prvtPwVcTDMCfgEntry 32 } 

prvtPwVcTDMCfgMplsOosPeerLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer circuit identifier  for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS "
DEFVAL { 255 }
::= { prvtPwVcTDMCfgEntry 33 }

prvtPwVcTDMCfgMplsOosTTL OBJECT-TYPE
SYNTAX INTEGER (2..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS TTL for the out-of-band signaling."       
DEFVAL { 255 }
::= { prvtPwVcTDMCfgEntry 34 }     


prvtPwVcTDMCfgMplsOosExp OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS EXP for the out-of-band signaling."
DEFVAL { 0 }
::= { prvtPwVcTDMCfgEntry 35 }     


prvtPwVcTDMCfgRtpOosPayload OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to SET RTP Oos payload type."
::= { prvtPwVcTDMCfgEntry 36 }

prvtPwVcTDMCfgRtpPayload OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to SET RTP payload type."
::= { prvtPwVcTDMCfgEntry 37 }




-- Channel group table --
prvtTDMChannelGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtTDMChannelGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the set of available channel groups."

::= { prvtPwVcTDMObjects 4 } 

prvtTDMChannelGrpEntry OBJECT-TYPE
SYNTAX PrvtTDMChannelGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These parameters are used to configure a CES channel group."

INDEX { prvtTDMChannelGrpModuleID, prvtTDMChannelGrpID }

::= { prvtTDMChannelGrpTable 1 }


PrvtTDMChannelGrpEntry ::= SEQUENCE { 
prvtTDMChannelGrpModuleID Unsigned32,
prvtTDMChannelGrpID Unsigned32,
prvtTDMChannelGrpCfgError INTEGER, 
prvtTDMChannelGrpTimeSlots TimeSlotList,
prvtTDMChannelGrpOC3TimeSlots InterfaceTimeSlot 
}

prvtTDMChannelGrpModuleID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the module to which this channel group belongs. "
::= { prvtTDMChannelGrpEntry 1 }

prvtTDMChannelGrpID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel group ID."
::= { prvtTDMChannelGrpEntry 2 }

prvtTDMChannelGrpCfgError OBJECT-TYPE
SYNTAX INTEGER {
noError(0),
channelGroupAtached(1)
}

MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the correctness of the configuration. If it has a value of 
channelGroupAtached(1) this channel group has been attached to a circuit and the 
new configuration cannot be applied."
::= { prvtTDMChannelGrpEntry 3 }

prvtTDMChannelGrpTimeSlots OBJECT-TYPE
SYNTAX TimeSlotList 
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure  which time slots are members of the given
channel group."
::= { prvtTDMChannelGrpEntry 4 }

prvtTDMChannelGrpOC3TimeSlots OBJECT-TYPE
SYNTAX InterfaceTimeSlot 
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure  interface and time slots  for the given channel
group in OC3 module."
::= { prvtTDMChannelGrpEntry 5 }



-- END of Table

-- TDM PW Performance Current Table.

prvtPwVcTDMPerfCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtPwVcTDMPerfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The current 15 minute interval counts are in
this table.

This table provides per TDM PW performance information."

::= { prvtPwVcTDMObjects 5 }

prvtPwVcTDMPerfCurrentEntry OBJECT-TYPE
SYNTAX PrvtPwVcTDMPerfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for every
prvtPwVcTDM entry. After 15 minutes, the contents of this table
entry are copied to a new entry in the prvtPwVcTDMPerfInterval
table and the counts in this entry are reset to zero."

INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId }

::= { prvtPwVcTDMPerfCurrentTable 1 }

PrvtPwVcTDMPerfCurrentEntry ::= SEQUENCE {

prvtPwVcTDMPerfCurrentPktsOoseq Counter32,
prvtPwVcTDMPerfCurrentJtrBfrUnderruns Counter32,
prvtPwVcTDMPerfCurrentJtrBfrOverruns Counter32,
prvtPwVcTDMPerfCurrentMalformedPkt Counter32,
prvtPwVcTDMPerfCurrentNearEndFC Counter32,
prvtPwVcTDMPerfCurrentFarEndFC Counter32
}

prvtPwVcTDMPerfCurrentPktsOoseq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of sequence (via TDM
header sequence numbers), but successfully re-ordered.
Note: some implementations may not support this
Feature."
::= { prvtPwVcTDMPerfCurrentEntry 1 }

prvtPwVcTDMPerfCurrentJtrBfrUnderruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a packet needed to be played
out and the jitter buffer was empty."
::= { prvtPwVcTDMPerfCurrentEntry 2 }

prvtPwVcTDMPerfCurrentJtrBfrOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of range (via TDM
header sequence numbers), and could not be re-
ordered, or could not fit in the jitter buffer."
::= { prvtPwVcTDMPerfCurrentEntry 3 }

prvtPwVcTDMPerfCurrentMalformedPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected with unexpected size, or
bad headers' stack"
::= { prvtPwVcTDMPerfCurrentEntry 4 }

prvtPwVcTDMPerfCurrentNearEndFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of local packet failures."
::= { prvtPwVcTDMPerfCurrentEntry 5 }

prvtPwVcTDMPerfCurrentFarEndFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of remote packet failures."
::= { prvtPwVcTDMPerfCurrentEntry 6 }


-- End TDM PW Performance Current Interval Table

-- TDM PW Performance Interval Table.

prvtPwVcTDMPerfIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtPwVcTDMPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides performance information per TDM PW
similar to the prvtPwVcTDMPerfCurrentTable above. However,
these counts represent historical 15 minute intervals.
Typically, this table will have a maximum of 96 entries
for a 24 hour period, but is not limited to this. "
::= { prvtPwVcTDMObjects 6 }

prvtPwVcTDMPerfIntervalEntry OBJECT-TYPE
SYNTAX PrvtPwVcTDMPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for
every prvtPwVcTDMPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry, then resets its counts
to zero for the next current 15 minute interval. "

INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId, prvtPwVcTDMPerfIntervalNumber }

::= { prvtPwVcTDMPerfIntervalTable 1 }

PrvtPwVcTDMPerfIntervalEntry ::= SEQUENCE {
prvtPwVcTDMPerfIntervalNumber Unsigned32,
prvtPwVcTDMPerfIntervalValidData TruthValue,
prvtPwVcTDMPerfIntervalDuration Integer32,

prvtPwVcTDMPerfIntervalPktsOoseq Counter32,
prvtPwVcTDMPerfIntervalJtrBfrUnderruns Counter32,
prvtPwVcTDMPerfIntervalJtrBfrOverruns Counter32,
prvtPwVcTDMPerfIntervalMalformedPkt Counter32,
prvtPwVcTDMPerfIntervalNearEndFC Counter32,
prvtPwVcTDMPerfIntervalFarEndFC Counter32

}

prvtPwVcTDMPerfIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number (normally between 1 and 96 to cover a 24 hour
period) which identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and
the interval identified by N is the interval immediately
preceding the one identified by N-1. The minimum range of
N is 1 through 4. The default range is 1 through 32. The
maximum value of N is 1 through 96."
::= { prvtPwVcTDMPerfIntervalEntry 1 }

prvtPwVcTDMPerfIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid."
::= { prvtPwVcTDMPerfIntervalEntry 2 }

prvtPwVcTDMPerfIntervalDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION

"The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided."
::= { prvtPwVcTDMPerfIntervalEntry 3 }

prvtPwVcTDMPerfIntervalPktsOoseq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of sequence (via TDM
header sequence numbers), but successfully re-ordered.
Note: some implementations mat not support this
feature."
::= { prvtPwVcTDMPerfIntervalEntry 4 }

prvtPwVcTDMPerfIntervalJtrBfrUnderruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a packet needed to be played
out and the jitter buffer was empty."
::= { prvtPwVcTDMPerfIntervalEntry 5 }

prvtPwVcTDMPerfIntervalJtrBfrOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of range (via TDM
header sequence numbers), and could not be re-
ordered, or could not fit in the jitter buffer."
::= { prvtPwVcTDMPerfIntervalEntry 6 }

prvtPwVcTDMPerfIntervalMalformedPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected with unexpected size, or
bad headers' stack"
::= { prvtPwVcTDMPerfIntervalEntry 7 }

prvtPwVcTDMPerfIntervalNearEndFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of local packet failures."
::= { prvtPwVcTDMPerfIntervalEntry 8 }

prvtPwVcTDMPerfIntervalFarEndFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of remote packet failures."
::= { prvtPwVcTDMPerfIntervalEntry 9 }


-- End TDM PW Performance Interval Table

-- TDM PW Performance Table

prvtPwVcTDMPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtPwVcTDMPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides performance information per TDM PW
similar to the prvtPwVcTDMPerfIntervalTable above. However,
these counters represent complete historical information. "
::= { prvtPwVcTDMObjects 7 }

prvtPwVcTDMPerfEntry OBJECT-TYPE
SYNTAX PrvtPwVcTDMPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created in this table by the agent for
every entry in the prvtPwVcTDM table."

INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId }

::= { prvtPwVcTDMPerfTable 1 }

PrvtPwVcTDMPerfEntry ::= SEQUENCE {
prvtPwVcTDMPerfPktsOoseq Counter32,
prvtPwVcTDMPerfJtrBfrUnderruns Counter32,
prvtPwVcTDMPerfJtrBfrOverruns Counter32,
prvtPwVcTDMPerfMalformedPkt Counter32,
prvtPwVcTDMPerfNearEndFC Counter32,
prvtPwVcTDMPerfFarEndFC Counter32,
prvtPwVcTDMPerfDiscontinuityTime TimeStamp
}

prvtPwVcTDMPerfPktsOoseq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of sequence (via TDM
header sequence numbers), but successfully re-ordered.
Note: some implementations may not support this
feature."
::= { prvtPwVcTDMPerfEntry 1 }

prvtPwVcTDMPerfJtrBfrUnderruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a packet needed to be played
out and the jitter buffer was empty."
::= { prvtPwVcTDMPerfEntry 2 }

prvtPwVcTDMPerfJtrBfrOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of range (via TDM
header sequence numbers), and could not be re-
ordered, or could not fit in the jitter buffer."
::= { prvtPwVcTDMPerfEntry 3 }

prvtPwVcTDMPerfMalformedPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected with unexpected size, or
bad headers' stack."
::= { prvtPwVcTDMPerfEntry 4 }


prvtPwVcTDMPerfDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current

DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which any one or more of this segment's Counter32
suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem, then
this object contains a zero value."
::= { prvtPwVcTDMPerfEntry 5 }

prvtPwVcTDMPerfNearEndFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of local packet failures."
::= { prvtPwVcTDMPerfEntry 6 }

prvtPwVcTDMPerfFarEndFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of remote packet failures."
::= { prvtPwVcTDMPerfEntry 7 }

-- End of PW TDM Performance table

-- TDM PW Alarm Table

prvtPwVcTDMAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrvtPwVcTDMAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains object for configuring and displaying CES Circuits TCA thresholds."
::= { prvtPwVcTDMObjects 8 }

prvtPwVcTDMAlarmEntry OBJECT-TYPE
SYNTAX PrvtPwVcTDMAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { prvtPwVcTDMModuleId, prvtPwVcTDMCircuitId, prvtPwVcTDMAlarmIndex }
::= { prvtPwVcTDMAlarmTable 1 }

PrvtPwVcTDMAlarmEntry ::= SEQUENCE {
prvtPwVcTDMAlarmIndex Gauge32,
prvtPwVcTDMAlarmVariable OBJECT IDENTIFIER,
prvtPwVcTDMAlarmThreshold INTEGER,
prvtPwVcTDMAlarmValue INTEGER
}

prvtPwVcTDMAlarmIndex OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An integer uniquely identifying an alarm entry." 
::= { prvtPwVcTDMAlarmEntry 1 } 

prvtPwVcTDMAlarmVariable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OID of the variable whose value is being monitored. Depending on the time interval, 
the error condition and the modue and circuit ID, this points to an object from an entry in 
prvtPwVcTDMPerfCurrentTable or prvtPwVcTDMPerfTable." 
::= { prvtPwVcTDMAlarmEntry 2 } 

prvtPwVcTDMAlarmThreshold OBJECT-TYPE
SYNTAX INTEGER 
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the
object pointed by prvtPwVcTDMAlarmVariable remains above this threshold for more than 3 seconds." 
::= { prvtPwVcTDMAlarmEntry 3 } 

prvtPwVcTDMAlarmValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object pointed to by prvtPwVcTDMAlarmVariable, present for notification purposes." 
::= { prvtPwVcTDMAlarmEntry 4 } 

prvtPwVcTDMAlarm NOTIFICATION-TYPE
OBJECTS { prvtPwVcTDMAlarmVariable, prvtPwVcTDMAlarmThreshold, prvtPwVcTDMAlarmValue }
STATUS current
DESCRIPTION
"This notification is sent when the value of a TDM port error condition statistic has exceeded the 
configured threshold, or the value has dropped back below the threshold."
::= {prvtPwVcTDMTraps 1}

prvtPwVcTDMStatusChange NOTIFICATION-TYPE
OBJECTS { prvtPwVcTDMOperStatus, prvtPwVcTDMCfgAdminStatus }
STATUS current
DESCRIPTION
"This notification is sent when the operational or administrative status of circuit changes."
::= {prvtPwVcTDMTraps 2}

-- End of PW TDM Performance table

-- Conformance Information

prvtPwVcTDMGroups OBJECT IDENTIFIER ::= { prvtPwVcTDMConformance 1 }
prvtPwVcTDMCompliances OBJECT IDENTIFIER ::= { prvtPwVcTDMConformance 2 }

prvtPwTDMModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agent that support PW
over TDM PSN operation."

MODULE -- this module
MANDATORY-GROUPS { prvtPwVcTDMGroup,
prvtPwVcTDMPerfCurrentGroup,
prvtPwVcTDMPerfIntervalGroup,
prvtPwVcTDMPerfGroup,
prvtPwVcTDMNotificationsGroup
}

OBJECT prvtPwVcTDMCfgPktReorder
MIN-ACCESS read-only
DESCRIPTION
"The ability to set the packet reordering
is not required."

OBJECT prvtPwVcTDMCfgRtpHdrUsed
MIN-ACCESS read-only
DESCRIPTION
"The ability to set the whether to use the
RTP header or not is not required."


::= { prvtPwVcTDMCompliances 1 }

-- Units of conformance.

prvtPwVcTDMGroup OBJECT-GROUP
OBJECTS {
prvtPwVcTDMType,
prvtPwVcRelTDMCfgIndex,
prvtPwVcTDMTimeElapsed,
prvtPwVcTDMValidIntervals,
prvtPwVcTDMCurrentIndications,
prvtPwVcTDMLatchedIndications,
prvtPwVcTDMLastEsTimeStamp,
prvtPwVcTDMCfgPayloadSize,
prvtPwVcTDMCfgPktReorder,
prvtPwVcTDMCfgRtpHdrUsed,
prvtPwVcTDMCfgJtrBfrDepth
}
STATUS current
DESCRIPTION
"Collection of objects for basic TDM PW config and
status."
::= { prvtPwVcTDMGroups 1 }


prvtPwVcTDMPerfCurrentGroup OBJECT-GROUP
OBJECTS {
prvtPwVcTDMPerfCurrentPktsOoseq,
prvtPwVcTDMPerfCurrentJtrBfrUnderruns,
prvtPwVcTDMPerfCurrentJtrBfrOverruns,
prvtPwVcTDMPerfCurrentMalformedPkt,
prvtPwVcTDMPerfNearEndFC,
prvtPwVcTDMPerfFarEndFC
}
STATUS current
DESCRIPTION
"Collection of current statistics objects for TDM PWs."
::= { prvtPwVcTDMGroups 2 }

prvtPwVcTDMPerfIntervalGroup OBJECT-GROUP
OBJECTS {
prvtPwVcTDMPerfIntervalPktsOoseq,
prvtPwVcTDMPerfIntervalJtrBfrUnderruns,
prvtPwVcTDMPerfIntervalJtrBfrOverruns,
prvtPwVcTDMPerfIntervalMalformedPkt,
prvtPwVcTDMPerfNearEndFC,
prvtPwVcTDMPerfFarEndFC,
prvtPwVcTDMPerfIntervalValidData,
prvtPwVcTDMPerfIntervalDuration

}
STATUS current
DESCRIPTION
"Collection of Interval statistics objects for TDM PWs."
::= { prvtPwVcTDMGroups 3 }

prvtPwVcTDMPerfGroup OBJECT-GROUP
OBJECTS {
prvtPwVcTDMPerfPktsOoseq,
prvtPwVcTDMPerfJtrBfrUnderruns,
prvtPwVcTDMPerfJtrBfrOverruns,
prvtPwVcTDMPerfMalformedPkt,
prvtPwVcTDMPerfNearEndFC,
prvtPwVcTDMPerfFarEndFC,
prvtPwVcTDMPerfDiscontinuityTime
}
STATUS current
DESCRIPTION
"Collection of running statistics objects for TDM PWs."
::= { prvtPwVcTDMGroups 4 }

prvtPwVcTDMNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { prvtPwVcTDMAlarm, prvtPwVcTDMStatusChange } 
STATUS current
DESCRIPTION
"The group of supported notifications."
::= { prvtPwVcTDMGroups 5 }


END