path: root/MIBS/telco-systems/binos/PRVT-MPLS-TE-MIB

-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename:   PRVT-MPLS-TE-MIB.mib
-- ** Project:    T-Metro Switches.
-- ** Purpose:    Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
--                             WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information.  This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM.  Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-MPLS-TE-MIB DEFINITIONS ::= BEGIN
-- PRODUCT-SHORT-NAME MPLS

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
   Integer32, Unsigned32, Counter32, zeroDotZero,
   Counter64, TimeTicks
      FROM SNMPv2-SMI
      
           NOTIFICATION-TYPE, transmission
          FROM SNMPv2-SMI                    -- [RFC2578]

   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
      FROM SNMPv2-CONF

   TEXTUAL-CONVENTION, TruthValue, RowStatus, RowPointer,
   StorageType, DisplayString, TimeStamp
      FROM SNMPv2-TC

   InterfaceIndexOrZero
      FROM IF-MIB

   MplsBitRate, MplsBurstSize, MplsLSPID,
   MplsTunnelIndex, MplsTunnelInstanceIndex,
   MplsTunnelAffinity, MplsExtendedTunnelId, MplsPathIndex,
   MplsPathIndexOrZero, MplsOwner, TeHopAddressType,
   TeHopAddress, TeHopAddressAS, TeHopAddressUnnum
      FROM MPLS-TC-PRIV-STDEXT-MIB                               -- [RFC3811]

   InetAddressPrefixLength, InetAddressType, InetAddress, InetAddressIPv4
      FROM INET-ADDRESS-MIB                              -- [RFC3291]

   prvtMplsTeMibEntityIndex
      FROM PRVT-TEMIB-ENTITY-MIB 
      
   mpls 				 		FROM PRVT-CR-LDP-MIB;

mplsTeMIB MODULE-IDENTITY
      LAST-UPDATED "200902170000Z" 
      ORGANIZATION "BATM Advanced Communication"
      CONTACT-INFO
                   " BATM/Telco Systems Support team
					Email: 
				For North America: techsupport@telco.com
				For North Europe: support@batm.de, info@batm.de
				For the rest of the world: techsupport@telco.com"
   DESCRIPTION
        "This MIB module contains managed object definitions
          for MPLS Traffic Engineering (TE) as defined in:
          Extensions to RSVP for LSP Tunnels, Awduche et al,
          Internet Draft <draft-ietf-mpls-rsvp-lsp-tunnel-
          07.txt>, August 2000; Constraint-Based LSP Setup
          using LDP, B. Jamoussi, Internet Draft <draft-ietf-
          mpls-cr-ldp-04.txt>, July 2000; Requirements for
          Traffic Engineering Over MPLS, Awduche, D., J.
          Malcolm, J., Agogbua, J., O'Dell, M., J. McManus,
          <rfc2702.txt>, September 1999."


   -- Revision history.  
   REVISION "200902170000Z"
   DESCRIPTION
        "Removed references to undefined OBJECT-GROUPs."
   REVISION     "200811200000Z"
    DESCRIPTION
        "Added additional timer (mplsTunnelMBBTimeOut) in the tunnel mib."
   REVISION     "200808280000Z"
    DESCRIPTION
        "mplsTunnelReoptimized notification updates." 
    REVISION     "200803030000Z"
    DESCRIPTION
        "mplsTunnelRebuildTimer updates." 
    REVISION     "200712060000Z"
    DESCRIPTION
        "Minor TC updates."
  
    REVISION     "200712020959Z"
    DESCRIPTION
        "The attribute for guarded destination has IPv4 TC."

  
    


   ::= { mpls 2 }


-- Textual Conventions.

MplsTunnelIndexSyntax ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION
        "Index into mplsTunnelTable."
   SYNTAX        Integer32 (0..65535)

MplsLsrId ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION
        "A unique identifier for an MPLS LSR. This MAY
          represent an IpV4 address."
   SYNTAX   Unsigned32

MplsGeneralizedLabelType ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
       "The  label  types that are defined  for  Generalized
        MPLS."
   SYNTAX     INTEGER {
                  mplsLabel(1),
                  generalizedLabel(2),
                  wavebandLabel(3)
              }
-- Addition

MplsTunnelPrivateDataSyntax ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
       "Represents private data field."
    SYNTAX       OCTET STRING (SIZE (0..8))

MplsTunnelTNAAddress ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
      "TNA address of a tunnel."
    SYNTAX       OCTET STRING (SIZE (0..20))

MplsGeneralizedLabel ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255x"
    STATUS      current
    DESCRIPTION
        "This value represents a generalized MPLS Label.
        The label contents are specific to the label being
        represented.

        Wherever an MplsGeneralizedLabel is copied to or from
        a signaling protocol message, it is copied byte for
        byte as is.  Therefore, if the octet string is
        intended to represent multibyte values, it encodes
        those values in network (big-endian) byte order.
        This interpretation applies in particular to the
        non-generalized MPLS labels (32 bits) used in ATM, FR
        and generic MPLS networks."
    SYNTAX      OCTET STRING (SIZE (0..255))
-- End Addition

-- Top level components of this MIB.

-- tables, scalars
mplsTeObjects       OBJECT IDENTIFIER ::= { mplsTeMIB 1 }

-- traps
mplsTeNotifications OBJECT IDENTIFIER ::= { mplsTeMIB 2 }
mplsTeNotifyPrefix  OBJECT IDENTIFIER ::= { mplsTeNotifications 0 }

-- conformance
mplsTeConformance   OBJECT IDENTIFIER ::= { mplsTeMIB 3 }

-- MPLS tunnel table.

-- Addition
mplsTunnelIndexNextTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_TNI
   SYNTAX        SEQUENCE OF MplsTunnelIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table contains the next available values of
        mplsTunnelIndex for all entities."
   ::= { mplsTeObjects 1 }

mplsTunnelIndexNextEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table represents the next available
        mplsTunnelIndex for a specific TE-MIB entity.
        This MIB table is indexed by the PRVT-TE-MIB entity Index."

   INDEX  { prvtMplsTeMibEntityIndex }
      ::= { mplsTunnelIndexNextTable 1 }

MplsTunnelIndexNextEntry ::= SEQUENCE {
      mplsTunnelIndexNextIndex           Integer32
    }
-- End Addition

mplsTunnelIndexNextIndex OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "This object contains the next appropriate value
        to be used for mplsTunnelIndex when creating
        entries in the mplsTunnelTable. If the number of
        unassigned entries is exhausted, this object
        will take on the value of 0.  To obtain the
        mplsTunnelIndex value for a new entry, the
        manager must first issue a management protocol
        retrieval operation to obtain the current value
        of this object. The agent should modify the
        value to reflect the next unassigned index after
        each retrieval operation. After a manager
        retrieves a value the agent will determine
        through its local policy when this index value
        will be made available for reuse."
::= { mplsTunnelIndexNextEntry 1 }


mplsTunnelTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_TNNL
   SYNTAX        SEQUENCE OF MplsTunnelEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelTable allows new MPLS tunnels to be
          created between an LSR and a remote endpoint, and
          existing tunnels to be reconfigured or removed.
          Note that only point-to-point tunnel segments are
          supported, although multi-point-to-point and point-
          to-multi-point connections are supported by an LSR
          acting as a cross-connect.  Each MPLS tunnel can
          thus have one out-segment originating at this LSR
          and/or one in-segment terminating at this LSR.

          To configure tunnels where the ingress and egress routers
          are identified by IPv6 addresses, the following approach is
          used.

          - The mplsTunnelIngressLSRId and mplsTunnelEgressLSRId
            fields are set to 32-bit identifiers for the ingress and
            egress routers.

          - mplsTunnelHopTableIndex must be set to a non-zero value.

          - The first hop in the hop table for the tunnel path must be
            set to a global scope IPv6 address of the local router.

          - The last entry in the hop table must be set to a global
            scope IPv6 address of the egress router."
   ::= { mplsTeObjects 2 }

mplsTunnelEntry OBJECT-TYPE
   SYNTAX        MplsTunnelEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents an MPLS tunnel.
          An entry can be created by a network administrator
          or by an SNMP agent as instructed by an MPLS
          signaling protocol. Whenever a new entry is created
          with mplsTunnelIsIf set to true(1), then a
          corresponding entry is created in ifTable as well
          (see RFC 2233). The ifType of this entry is
          mplsTunnel(150)."
   INDEX  { prvtMplsTeMibEntityIndex,
            mplsTunnelIndex, mplsTunnelInstance,
            mplsTunnelIngressLSRId, mplsTunnelEgressLSRId }
      ::= { mplsTunnelTable 1 }


MplsTunnelEntry ::= SEQUENCE {
      mplsTunnelIndex                   MplsTunnelIndexSyntax,
      mplsTunnelInstance                MplsTunnelInstanceIndex,
      mplsTunnelIngressLSRId            MplsExtendedTunnelId,
      mplsTunnelEgressLSRId             MplsExtendedTunnelId,
      mplsTunnelName                    DisplayString,
      mplsTunnelDescr                   DisplayString,
      mplsTunnelIsIf                    TruthValue,
      mplsTunnelIfIndex                 InterfaceIndexOrZero,
      mplsTunnelOwner                   MplsOwner,
      mplsTunnelRole                    INTEGER,
      mplsTunnelXCPointer               RowPointer,
      mplsTunnelSignallingProto         INTEGER,
      mplsTunnelSetupPrio               Integer32,
      mplsTunnelHoldingPrio             Integer32,
      mplsTunnelSessionAttributes       BITS,
      mplsTunnelLocalProtectInUse       TruthValue,
      mplsTunnelResourcePointer         RowPointer,
      mplsTunnelPrimaryInstance         MplsTunnelInstanceIndex,
      mplsTunnelInstancePriority        Unsigned32,
      mplsTunnelHopTableIndex           MplsPathIndexOrZero,
      mplsTunnelPathInUse               MplsPathIndexOrZero,
      mplsTunnelARHopTableIndex         MplsPathIndexOrZero,
      mplsTunnelCHopTableIndex          MplsPathIndexOrZero,
      mplsTunnelIncludeAnyAffinity      MplsTunnelAffinity,
      mplsTunnelIncludeAllAffinity      MplsTunnelAffinity,
      mplsTunnelExcludeAnyAffinity      MplsTunnelAffinity,
      mplsTunnelTotalUpTime             TimeTicks,
      mplsTunnelInstanceUpTime          TimeTicks,
      mplsTunnelPrimaryUpTime           TimeTicks,
      mplsTunnelPathChanges             Counter32,
      mplsTunnelLastPathChange          TimeTicks,
      mplsTunnelCreationTime            TimeStamp,
      mplsTunnelStateTransitions        Counter32,
      mplsTunnelAdminStatus             INTEGER,
      mplsTunnelOperStatus              INTEGER,
      mplsTunnelRowStatus               RowStatus,
      mplsTunnelStorageType             StorageType,
-- Addition
      mplsTunnelUnnumIf                 TruthValue,
      mplsTunnelAttributes              BITS,
      mplsTunnelLSPEncoding             INTEGER,
      mplsTunnelSwitchingType           Unsigned32,
      mplsTunnelLinkProtection          BITS,
      mplsTunnelGPid                    INTEGER,
      mplsTunnelSecondary               TruthValue,
      mplsTunnelDirection               INTEGER,
      mplsTunnelPathComp                INTEGER,
      mplsTunnelUpNotRecipType          InetAddressType,
      mplsTunnelUpNotRecip              InetAddress,
      mplsTunnelDownNotRecipType        InetAddressType,
      mplsTunnelDownNotRecip            InetAddress,
      mplsTunnelAdminStatusFlags        BITS,
      mplsTunnelExtraParamsPtr          RowPointer,
      mplsTunnelUseEgressLabel          TruthValue,
      mplsTunnelEgressLabel             MplsGeneralizedLabel,
      mplsTunnelEgressLabelType         MplsGeneralizedLabelType,
      mplsTunnelOmitEROIfOneHop         TruthValue,
      mplsTunnelPrivateData             MplsTunnelPrivateDataSyntax,
      mplsTunnelSrcTNAAddressType       INTEGER,
      mplsTunnelSrcTNAAddress           MplsTunnelTNAAddress,
      mplsTunnelDestTNAAddressType      INTEGER,
      mplsTunnelDestTNAAddress          MplsTunnelTNAAddress,
      mplsTunnelEndToEndRerouting       TruthValue,
      mplsTunnelIsUni                   TruthValue,
      mplsTunnelUniServiceLevel         Integer32,
      mplsTunnelUniEgressLabel          MplsGeneralizedLabel,
      mplsTunnelUniEgressLabelType      MplsGeneralizedLabelType,
      mplsTunnelUniEgressLabelPort      Unsigned32,
      mplsTunnelUniRvsEgressLabel       MplsGeneralizedLabel,
      mplsTunnelUniRvsEgressLabelType   MplsGeneralizedLabelType,
      mplsTunnelUniRvsEgressLabelPort   Unsigned32,
      mplsTunnelDeletionMode            INTEGER,
      mplsTunnelUniDiversityListIndex   Integer32,
      mplsTunnelDiffServIndex           Integer32,
      mplsTunnelReversePrivateData      MplsTunnelPrivateDataSyntax,
      mplsTunnelFastRerouteMode         INTEGER,
      mplsTunnelBackupSetupPrio         Integer32,
      mplsTunnelBackupHoldingPriority   Integer32,
      mplsTunnelBackupIncAny            MplsTunnelAffinity,
      mplsTunnelBackupIncAll            MplsTunnelAffinity,
      mplsTunnelBackupExcAny            MplsTunnelAffinity,
      mplsTunnelBackupBandwidth         MplsBitRate,
      mplsTunnelBackupMaxHops           Unsigned32,
      mplsTunnelIsSpc                   TruthValue,
      mplsTunnelUniIngressLabel         MplsGeneralizedLabel,
      mplsTunnelUniIngressLabelType     MplsGeneralizedLabelType,
      mplsTunnelUniIngressLabelPort     Unsigned32,
      mplsTunnelUniRvsIngrLabel         MplsGeneralizedLabel,
      mplsTunnelUniRvsIngrLabelType     MplsGeneralizedLabelType,
      mplsTunnelUniRvsIngrLabelPort     Unsigned32,
      mplsTunnelDiffServClassType       Integer32,
      mplsTunnelExtendedProtection      TruthValue,
      mplsTunnelProtecting              TruthValue,
      mplsTunnelNotification            TruthValue,
      mplsTunnelLspProtection           Unsigned32,
      mplsTunnelAssociatedLspId         MplsTunnelInstanceIndex,
      mplsTunnelCallIdType              INTEGER,
      mplsTunnelCallId                  OCTET STRING,
      mplsTunnelIsIpv6                  TruthValue,
      mplsTunnelMtu                     Integer32,
      mplsTunnelRebuildTimer            TimeTicks,
      mplsTunnelOperStatusFlags	        BITS,
      mplsTunnelGuardedDest             InetAddressIPv4,
      mplsTunnelMBBTimeOut              Integer32
-- End Addition
   }

mplsTunnelIndex OBJECT-TYPE
   SYNTAX        MplsTunnelIndexSyntax
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Uniquely identifies this row."
   ::= { mplsTunnelEntry 1 }

mplsTunnelInstance OBJECT-TYPE
   SYNTAX        MplsTunnelInstanceIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Uniquely identifies an instance of a tunnel. It is
          useful to identify multiple instances of tunnels
          for the purposes of backup and parallel tunnels."
   ::= { mplsTunnelEntry 2 }

mplsTunnelIngressLSRId OBJECT-TYPE
   SYNTAX        MplsExtendedTunnelId
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Identity of the ingress LSR associated with this
          tunnel instance. When the MPLS signalling protocol
          is rsvp(2) this value SHOULD be equal to the Tunnel
          Sender Address in the Sender Template object and MAY
          be equal to the Extended Tunnel Id field in the
          SESSION object. When the MPLS signalling protocol is
          crldp(3) this value SHOULD be equal to the Ingress
          LSR Router ID field in the LSPID TLV object."
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001
         2. Constraint-Based LSP Setup using LDP, Jamoussi
          (Editor), RFC 3212, January 2002"
   ::= { mplsTunnelEntry 3 }

mplsTunnelEgressLSRId OBJECT-TYPE
   SYNTAX        MplsExtendedTunnelId
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Identity of the egress LSR associated with this
          tunnel instance."
   ::= { mplsTunnelEntry 4 }

mplsTunnelName OBJECT-TYPE
   SYNTAX        DisplayString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The canonical name assigned to the tunnel. This name
          can be used to refer to the tunnel on the LSRs
          console port.  If mplsTunnelIsIf is set to true
          then the ifName of the interface corresponding to
          this tunnel should have a value equal to
          mplsTunnelName.  Also see the description of ifName
          in RFC 2863."
   REFERENCE
        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
          and F. Kastenholtz, June 2000"
   ::= { mplsTunnelEntry 5 }

mplsTunnelDescr OBJECT-TYPE
   SYNTAX        DisplayString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "A textual string containing information about the
          tunnel.  If there is no description this object
          contains a zero length string. This object is may
          not be signaled by MPLS signaling protocols,
          consequentally the value of this object at transit
          and egress LSRs MAY be automatically generated or
          absent."
   ::= { mplsTunnelEntry 6 }

mplsTunnelIsIf OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Denotes whether or not this tunnel corresponds to an
          interface represented in the interfaces group
          table. Note that if this variable is set to true
          then the ifName of the interface corresponding to
          this tunnel should have a value equal to
          mplsTunnelName.  Also see the description of ifName
          in RFC 2233."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 7 }

mplsTunnelIfIndex OBJECT-TYPE
   SYNTAX        InterfaceIndexOrZero
-- Addition
-- MAX-ACCESS    read-only
   MAX-ACCESS    read-create
-- End Addition
   STATUS        current
   DESCRIPTION
        "If mplsTunnelIsIf is set to true, then this value
          contains the LSR-assigned ifIndex which corresponds
          to an entry in the interfaces table.  Otherwise
          this variable should contain the value of zero
          indicating that a valid ifIndex was not assigned to
          this tunnel interface."
   REFERENCE
        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
          and F. Kastenholtz, June 2000"
   DEFVAL { 0 }
   ::= { mplsTunnelEntry 8 }

mplsTunnelOwner OBJECT-TYPE
   SYNTAX        MplsOwner
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Denotes the entity that created and is responsible
          for managing this tunnel. This column is
          automatically filled by the agent on creation of a
          row."
   ::= { mplsTunnelEntry 9 }

mplsTunnelRole OBJECT-TYPE
   SYNTAX        INTEGER { head(1),
                           transit(2),
                           tail(3),
                           headTail(4) }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This value signifies the role that this tunnel
          entry/instance represents. This value MUST be set
          to head(1) at the originating point of the tunnel.
          This value MUST be set to transit(2) at transit
          points along the tunnel, if transit points are
          supported. This value MUST be set to tail(3) at the
          terminating point of the tunnel if tunnel tails are
          supported.

         The value headTail(4) is provided for tunnels that
          begin and end on the same LSR."
   DEFVAL        { head }
      ::= { mplsTunnelEntry 10 }

mplsTunnelXCPointer OBJECT-TYPE
   SYNTAX        RowPointer
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable points to a row in the mplsXCTable.
          This table identifies the segments that compose
          this tunnel, their characteristics, and
          relationships to each other. A value of zeroDotZero
          indicates that no LSP has been associated with this
          tunnel yet.

          The array of longs specified here is configured as
          the OID array for the lmgr entity cross connect row.
          This consists of the length, family, lmgr entity
          index and row index values.  Only the
          AMB_MPLS_XC_INDEX_IDX index is referenced by the
          TE-MIB."
   REFERENCE
        "Srinivasan, C., Viswanathan, A., and T. Nadeau,
          Multiprotocol Label Switching (MPLS) Label Switching
          Router (LSR) Management Information Base (MIB), RFC 3813,
          June 2004"
   DEFVAL        { zeroDotZero }
   ::= { mplsTunnelEntry 11 }

mplsTunnelSignallingProto OBJECT-TYPE
   SYNTAX       INTEGER {
                     none(1),
                     rsvp(2),
                     crldp(3),
                     other(4)
                     }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The signalling protocol, if any, used to setup this
          tunnel."
   DEFVAL        { none }
   ::= { mplsTunnelEntry 12 }

mplsTunnelSetupPrio OBJECT-TYPE
   SYNTAX        Integer32 (0..7)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Indicates the setup priority of this tunnel."
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001
         2. Constraint-Based LSP Setup using LDP, Jamoussi
          (Editor), RFC 3212, January 2002"
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 13 }

mplsTunnelHoldingPrio OBJECT-TYPE
   SYNTAX        Integer32 (0..7)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Indicates the holding priority for this tunnel."
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001

         2. Constraint-Based LSP Setup using LDP, Jamoussi
          (Editor), RFC 3212, January 2002"
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 14 }

mplsTunnelSessionAttributes OBJECT-TYPE
   SYNTAX      BITS {
                  fastReroute (0),
                  mergingPermitted (1),
                  isPersistent (2),
                  isPinned (3),
                  recordRoute(4),
-- Addition
                  reserved5(5),
                  bandwidthProtect(6),
                  nodeProtect(7)
-- End Addition
                 }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
         "This bitmask indicates optional session values for
          this tunnel. The following describes these bit
          fields:

         fastReroute This flag indicates that any tunnel
          hop may choose to reroute this tunnel without
          tearing it down.  This flag permits transit routers
          to use a local repair mechanism which may result in
          violation of the explicit routing of this tunnel.
          When a fault is detected on an adjacent downstream
          link or node, a transit router can reroute traffic
          for fast service restoration.

         mergingPermitted This flag permits transit routers
          to merge this session with other RSVP sessions for
          the purpose of reducing resource overhead on
          downstream transit routers, thereby providing
          better network scalability.

        isPersistent  Indicates whether this tunnel should
          be restored automatically after a failure occurs.

        isPinned   This flag indicates whether the loose-
          routed hops of this tunnel are to be pinned.

        recordRoute This flag indicates if the
          signaling protocol should remember the tunnel path
          after it has been signaled.

--        recordLabels This flag indicates if the
--          signaling protocol should record labels as well as
--          the tunnel path.

        bandwidthProtect This flag indicates whether fast reroute
          bandwidth protection is desired.

        nodeProtect This flag indicates whether fast reroute
          node protection is desired."
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001."
   DEFVAL        { {} }
   ::= { mplsTunnelEntry 15 }

mplsTunnelLocalProtectInUse  OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Indicates that the local repair mechanism is in use
          to maintain this tunnel (usually in the face of an
          outage of the link it was previously routed over)."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 16 }

mplsTunnelResourcePointer OBJECT-TYPE
   SYNTAX        RowPointer
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable represents a pointer to the traffic
          parameter specification for this tunnel.  This
          value may point at an entry in the
          mplsTunnelResourceEntry to indicate which
          mplsTunnelResourceEntry is to be assigned to this
          LSP instance.  This value may optionally point at
          an externally defined traffic parameter
          specification table.  A value of zeroDotZero
          indicates best-effort treatment.  By having the
          same value of this object, two or more LSPs can
          indicate resource sharing.

          In this implementation of the mplsTunnelTable, the row must either
          be set to zeroDotZero, or must point at an entry in the
          mplsTunnelResourceTable.

          If a value other than zeroDotZero is used, then
          mplsTunnelExtraParamsPtr must be set to zeroDotZero."
   ::= { mplsTunnelEntry 17 }

mplsTunnelPrimaryInstance OBJECT-TYPE
   SYNTAX         MplsTunnelInstanceIndex
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Specifies the instance index of the primary instance
          of this tunnel."
   DEFVAL { 0 }
   ::= { mplsTunnelEntry 18 }

mplsTunnelInstancePriority OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This value indicates which priority, in descending
          order, with 0 indicating the lowest priority,
          within a group of tunnel instances.  A group of
          tunnel instances is defined as a set of LSPs with
          the same mplsTunnelIndex in this table, but with a
          different mplsTunnelInstance. Tunnel instance
          priorities are used to denote the priority at which
          a particular tunnel instance will supercede
          another.  Instances of tunnels containing the same
          mplsTunnelInstancePriority will be used for load
          sharing."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 19 }

mplsTunnelHopTableIndex OBJECT-TYPE
   SYNTAX         MplsPathIndexOrZero
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Index into the mplsTunnelHopTable entry that
          specifies the explicit route hops for this tunnel.
          This object is meaningful only at the head-end of
          the tunnel.

          For UNI tunnels, this field should be set to 0.

          For tunnels with no configured explicit route hops, this
          field should be set to 0.  In this case, the tunnel is
          routed using mplsTunnelEgressLSRId."
   DEFVAL { 0 }
   ::= { mplsTunnelEntry 20 }

mplsTunnelPathInUse OBJECT-TYPE
   SYNTAX        MplsPathIndexOrZero
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This value denotes the configured path that was
          chosen for this tunnel. This value reflects the
          secondary index into mplsTunnelHopTable. This path
          may not exactly match the one in
          mplsTunnelARHopTable due to the fact that some CSPF
          modification may have taken place. See
          mplsTunnelARHopTable for the actual path being
          taken by the tunnel. A value of zero denotes that
          no path is currently in use or available.

          For UNI tunnels, this field should be set to 0.

          For tunnels with no configued explicit route hops,
          this field should be set to 0."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 21 }

mplsTunnelARHopTableIndex OBJECT-TYPE
   SYNTAX        MplsPathIndexOrZero
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Index into the mplsTunnelARHopTable entry that
          specifies the actual hops traversed by the tunnel.
          This is automatically updated by the agent when the
          actual hops becomes available."
   DEFVAL { 0 }
   ::= { mplsTunnelEntry 22 }

mplsTunnelCHopTableIndex OBJECT-TYPE
   SYNTAX        MplsPathIndexOrZero
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Index into the mplsTunnelCHopTable entry that
          specifies the computed hops traversed by the
          tunnel. This is automatically updated by the agent
          when computed hops become available or when
          computed hops get modified."
   DEFVAL { 0 }
   ::= { mplsTunnelEntry 23 }

mplsTunnelIncludeAnyAffinity OBJECT-TYPE
   SYNTAX        MplsTunnelAffinity
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "A link satisfies the include-any constraint if and
          only if the constraint is zero, or the link and the
          constraint have a resource class in common.
          
          The field is a bitmask. Every request does not overwrite 
          the previous one. 0 value resets the field.
        "
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 24 }

mplsTunnelIncludeAllAffinity OBJECT-TYPE
   SYNTAX        MplsTunnelAffinity
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "A link satisfies the include-all constraint if and
          only if the link contains all of the administrative
          groups specified in the constraint.
          
          The field is a bitmask. Every request does not overwrite 
          the previous one. 0 value resets the field.
        "
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 25 }

mplsTunnelExcludeAnyAffinity OBJECT-TYPE
   SYNTAX        MplsTunnelAffinity
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "A link satisfies the exclude-any constraint if and
          only if the link contains none of the
          administrative groups specified in the constraint.
          
          The field is a bitmask. Every request does not overwrite 
          the previous one. 0 value resets the field.
        "
   REFERENCE
        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
          Awduche et al, RFC 3209, December 2001."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 26 }

mplsTunnelTotalUpTime OBJECT-TYPE
   SYNTAX        TimeTicks
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This value represents the aggregate up time for all
          instances of this tunnel, if available. If this
          value is unavailable, it MUST return a value of 0."
   DEFVAL        { 0 }
      ::= { mplsTunnelEntry 27 }

mplsTunnelInstanceUpTime OBJECT-TYPE
   SYNTAX        TimeTicks
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This value identifies the total time that this
          tunnel instance's operStatus has been Up(1)."
   DEFVAL        { 0 }
      ::= { mplsTunnelEntry 28 }

mplsTunnelPrimaryUpTime OBJECT-TYPE
   SYNTAX        TimeTicks
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Specifies the total time the primary instance of
          this tunnel has been active. The primary instance
          of this tunnel is defined in
          mplsTunnelPrimaryInstance."
   ::= { mplsTunnelEntry 29 }

mplsTunnelPathChanges OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Specifies the number of times the actual path for
         this tunnel instance has changed."
   ::= { mplsTunnelEntry 30 }

mplsTunnelLastPathChange OBJECT-TYPE
   SYNTAX        TimeTicks
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Specifies the time since the last change to the
         actual path for this tunnel instance."
   ::= { mplsTunnelEntry 31 }

mplsTunnelCreationTime OBJECT-TYPE
   SYNTAX        TimeStamp
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Specifies the value of SysUpTime when the first
          instance of this tunnel came into existence.
          That is, when the value of mplsTunnelOperStatus
          was first set to up(1)."
   ::= { mplsTunnelEntry 32 }

mplsTunnelStateTransitions OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Specifies the number of times the state
          (mplsTunnelOperStatus) of this tunnel instance has
          changed."
   ::= { mplsTunnelEntry 33 }

mplsTunnelAdminStatus OBJECT-TYPE
   SYNTAX     INTEGER {
                   -- ready to pass packets
                   up(1),
                   down(2),
                   -- in some test mode
                   testing(3)
             }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Indicates the desired operational status of this
          tunnel."
   ::= { mplsTunnelEntry 34 }

mplsTunnelOperStatus OBJECT-TYPE
   SYNTAX     INTEGER {
               -- ready to pass packets
               up(1),
               down(2),
               -- in some test mode
               testing(3),
               -- status cannot be determined
               unknown(4),
               dormant(5),
               -- some component is missing
               notPresent(6),
               -- down due to the state of
               -- lower layer interfaces
               lowerLayerDown(7)
             }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Indicates the actual operational status of this
          tunnel, which is typically but not limited to, a
          function of the state of individual segments of
          this tunnel."
   ::= { mplsTunnelEntry 35 }

mplsTunnelRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create, modify, and/or
          delete a row in this table.  When a row in this
          table is in active(1) state, no objects in that row
          can be modified by the agent except
          mplsTunnelAdminStatus, mplsTunnelRowStatus and
          mplsTunnelStorageType."
   ::= { mplsTunnelEntry 36 }

mplsTunnelStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION  "The storage type for this tunnel entry.
                 Conceptual rows having the value 'permanent'
                 need not allow write-access to any columnar
                 objects in the row."
   DEFVAL        { volatile }
   ::= { mplsTunnelEntry 37 }

-- Addition
mplsTunnelUnnumIf OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "Denotes whether or not this tunnel corresponds to an unnumbered
      interface represented in the interfaces group table.

      This object is only used if mplsTunnelIsIf is set to 'true'.

      If both this object and the mplsTunnelIsIf object are set to
      'true', the originating LSR adds an LSP_TUNNEL_INTERFACE_ID
      object to the outgoing Path message.

      This object contains information that is only used by the
      terminating LSR."
   REFERENCE
     "Signalling Unnumbered Links in RSVP-TE, Kompella, K.
      and Rekhter, Y., RFC 3477, January 2003."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 38 }

   mplsTunnelAttributes OBJECT-TYPE
     SYNTAX BITS {
       reserved0(0),
       reserved1(1),
       reserved2(2),
       reserved3(3),
       reserved4(4),
       labelRecordingDesired (5)
     }
     MAX-ACCESS read-create
     STATUS  current
     DESCRIPTION
       "This bitmask indicates optional parameters for this tunnel.
        These bits should be taken in addition to those defined in
        mplsTunnelSessionAttributes in order to determine the full set
        of options to be signaled (for example SESSION_ATTRIBUTES flags
        in RSVP-TE). The following describes these bitfields:

        labelRecordingDesired
          This flag indicates that label information should be included
          when doing a route record. This bit is not valid unless the
          recordRoute bit is set in the mplsTunnelSessionAttributes object."
     REFERENCE
       "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
        RFC 3209, December 2001."
     DEFVAL  { { } }
   ::= { mplsTunnelEntry 39 }

mplsTunnelLSPEncoding OBJECT-TYPE
   SYNTAX        INTEGER {
        notInUse (0),
        tunnelLspPacket (1),
        tunnelLspEthernet (2),
        tunnelLspAnsiEtsiPdh (3),
        tunnelLspSdhSonet (5),
        tunnelLspDigitalWrapper (7),
        tunnelLspLambda (8),
        tunnelLspFiber (9),
        tunnelLspFiberChannel (11)
   }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This object indicates the encoding of the LSP being requested.
         It is only required when a generalized label request will be used
         for this LSP.   A value of 0 in this object indicates that a
         generalized label request will not be used to set up this LSP.

         If this object indicates Sonet / SDH LSP encoding, then
         the choice of QOS to use is controlled by the
         mplsTunnelResourcePointer object.  If
         mplsTunnelResourcePointer is 0.0, then a Sonet/SDH QOS
         format is used, else an Intserv QOS is used."
   DEFVAL        { notInUse }
   ::= { mplsTunnelEntry 40 }

mplsTunnelSwitchingType OBJECT-TYPE
   SYNTAX       Unsigned32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
     "Indicates the type of switching that should be performed on
      a particular link. This field is needed for links that
                 advertise more than one type of switching capability.
                 Values of this field are as in the Switching Capability
                 field defined in rfc3471.

                 It is only used when mplsTunnelLSPEncoding is non-zero."

   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 41 }

mplsTunnelLinkProtection OBJECT-TYPE
   SYNTAX      BITS {
          extraTraffic(0),
          unprotected (1),
          shared (2),
          dedicatedOneToOne (3),
          dedicatedOnePlusOne (4),
          enhanced (5)
      }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "This bitmask indicates the level of link protection required. A
      value of zero (no bits set) indicates that any protection may be
      used. The following describes these bitfields:

      extraTraffic
        Indicates that the LSP should use links that are protecting
        other (primary) traffic. Such LSPs may be preempted when the
        links carrying the (primary) traffic being protected fail.

      unprotected
        Indicates that the LSP should not use any link layer
        protection.

      shared
        Indicates that a shared link layer protection scheme, such as
        1:N protection, should be used to support the LSP.

      dedicatedOneToOne
        Indicates that a dedicated link layer protection scheme,
        i.e., 1:1 protection, should be used to support the LSP.

      dedicatedOnePlusOne
        Indicates that a dedicated link layer protection scheme,
        i.e., 1+1 protection, should be used to support the LSP.

      enhanced
        Indicates that a protection scheme that is more reliable than
        Dedicated 1+1 should be used, e.g., 4 fiber BLSR/MS-SPRING.

      This object is only meaningful if mplsTunnelLSPEncoding is
      not set to 'tunnelLspNotGmpls'."
   REFERENCE
      "Berger, L., et al., Generalized Multi-Protocol
       Label Switching (GMPLS) Signaling Functional
       Description, RFC 3471, January 2003."
   DEFVAL { {} }
   ::= { mplsTunnelEntry 42 }

mplsTunnelGPid OBJECT-TYPE
   SYNTAX        INTEGER {
        unknown (0),
        ds1SF (1),
        ds1ESF (2),
        ds3M23 (3),
        ds3Cbit (4),
        asyncE4 (5),
        asyncDS3 (6),
        asyncE3 (7),
        bitSyncE3 (8),
        byteSyncE3 (9),
        asyncDS2 (10),
        bitSyncDS2 (11),
        byteSyncDS2 (12),
        asyncE1 (13),
        byteSyncE1 (14),
        byteSync31DS0 (15),
        asyncDS1 (16),
        bitSyncDS1 (17),
        byteSyncDS1 (18),
        vcByteSyncDS2 (19),
        vcAsyncE1 (20),
        vcByteSyncE1 (21),
        ds1SFAsync (22),
        ds1ESFAsync (23),
        ds3M23Async (24),
        ds3CbitAsync (25),
        vt (26),
        sts (27),
        pos16CRC (28),
        pos32CRC (29),
        posScrambling16CRC (30),
        posScrambling32CRC (31),
        atmMapping (32),
        ethernet (33),
        sdh (34),
        sonet (35),
        digitalWrapper (36),
        lambda (37),
        etsiPdh (38),
        ansiPdh (39),
        laps (40),
        fddi (41),
        dqdb (42),
        fiberch3 (43),
        hdlc (44),
        etherV2di (45),
        ether8023 (46),
        etherGfpSonet (56)
   }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This object indicates the payload carried by the LSP.It is only
      required when GMPLS will be used for this LSP.

        Only valid if Generalized Label Request is in use as specified
        by mplsTunnelLSPEncodingType.
        This object is only meaningful if mplsTunnelLSPEncoding is not
        set to 0"
   DEFVAL  { 0 }
   ::= { mplsTunnelEntry 43 }


mplsTunnelSecondary OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "Indicates that the requested LSP is a secondary LSP.

        This is a GMPLS feature, and should only be used when GMPLS will be
        be used for this LSP.

       This object is only meaningful if mplsTunnelLSPEncoding is not
       set to 0."
   REFERENCE
     "Berger, L., et al., Generalized Multi-Protocol
      Label Switching (GMPLS) Signaling Functional
      Description, RFC 3471, January 2003."
   DEFVAL  { false }   
::= { mplsTunnelEntry 44 }

mplsTunnelDirection OBJECT-TYPE
   SYNTAX        INTEGER {
     out (0),
     outbidir (1),
-- PRVT-Addition
     in (2),
     hwbidir (3),
     inbidir (4),
     transuni (5),
     transbi (6),
     transbih (7)
-- End PRVT-Addition

   }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Whether   this  tunnel  is  unidirectional-incoming,
        unidirectional-outgoing, bidirectional in hardware,
        the terminator end of a signalled bidirectional
        tunnel, the initiator end of a signalled
        bidirectional tunnel, unidirectional at transit,
        signalled bidirectional at transit, or bidirectional
        in hardware at transit.

      Values of this object other than 'out' are meaningful
      only if mplsTunnelLSPEncoding is not set to 0."
   DEFVAL        { out }
   ::= { mplsTunnelEntry 45 }

mplsTunnelPathComp OBJECT-TYPE
   SYNTAX  INTEGER {
       dynamicFull(1),-- CSPF fully computed
       explicit(2),-- fully specified path
       dynamicPartial(3) -- CSPF partially computed
   }
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
     "This value instructs the source node on how to perform path
      computation on the explicit route specified by the associated
      entries in the mplsTunnelHopTable.

        dynamicFull
        The user specifies at least the source and
        destination of the path and expects that the CSPF
        will calculate the remainder of the path.

        explicit
        The user specifies the entire path for the tunnel to
        take. This path may contain strict or loose hops.
        Evaluation of the explicit route will be performed
        hop by hop through the network.

        dynamicPartial
        The user specifies at least the source and
        destination of the path and expects that the CSPF
        will calculate the remainder of the path. The path
        computed by CSPF is allowed to be only partially
        computed allowing the remainder of the path to be
        filled in across the network.

      This object deprecates mplsTunnelHopEntryPathComp."
   DEFVAL { dynamicFull }
 ::= { mplsTunnelEntry 46 }

mplsTunnelUpNotRecipType OBJECT-TYPE
   SYNTAX  InetAddressType
   MAX-ACCESS read-create
   STATUS  current
   DESCRIPTION
     "Type of upstream notify recipient address for this tunnel."
   DEFVAL { unknown }
 ::= { mplsTunnelEntry 101 }

mplsTunnelUpNotRecip OBJECT-TYPE
   SYNTAX  InetAddress
   MAX-ACCESS read-create
   STATUS  current
   DESCRIPTION
     "Indicates the address of the upstream recipient for Notify
      messages relating to this tunnel.

      This object is only valid when signaling a tunnel using RSVP. It
      is also not valid at the tail end of the tunnel.

      If set to 0, no Notify Request object will be included in
      outgoing Path messages."
   REFERENCE
     "Generalized MPLS Signaling - RSVP-TE Extensions, Berger,
      L. (Editor), RFC 3473, January 2003."
 ::= { mplsTunnelEntry 47 }

mplsTunnelDownNotRecipType OBJECT-TYPE
   SYNTAX  InetAddressType
   MAX-ACCESS read-create
   STATUS  current
   DESCRIPTION
     "Type of downstream notify recipient address for this tunnel."
   DEFVAL { unknown }
 ::= { mplsTunnelEntry 102 }

mplsTunnelDownNotRecip OBJECT-TYPE
   SYNTAX  InetAddress
   MAX-ACCESS read-create
   STATUS  current
   DESCRIPTION
     "Indicates the address of the downstream recipient for Notify
      messages relating to this tunnel.

      This object is only valid when signaling a tunnel using RSVP. It
      is also not valid at the head end of the tunnel.

      If set to 0, no Notify Request object will be included in
      outgoing Resv messages."

   REFERENCE
     "Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
      (Editor), RFC 3473, January 2003."
 ::= { mplsTunnelEntry 48 }

mplsTunnelAdminStatusFlags OBJECT-TYPE
   SYNTAX      BITS {
          delInProgress (0),
          adminDown (1),
          testing (2),
           reserved3 (3),            -- reserved
           reserved4 (4),            -- reserved
           reserved5 (5),            -- reserved
           reserved6 (6),            -- reserved
           reserved7 (7),            -- reserved
           reserved8 (8),            -- reserved
           reserved9 (9),            -- reserved
           reserved10 (10),          -- reserved
           reserved11 (11),          -- reserved
           reserved12 (12),          -- reserved
           reserved13 (13),          -- reserved
           reserved14 (14),          -- reserved
           reserved15 (15),          -- reserved
           reserved16 (16),          -- reserved
           reserved17 (17),          -- reserved
           reserved18 (18),          -- reserved
           reserved19 (19),          -- reserved
           reserved20 (20),          -- reserved
           reserved21 (21),          -- reserved
           reserved22 (22),          -- reserved
           reserved23 (23),          -- reserved
           reserved24 (24),          -- reserved
           reserved25 (25),          -- reserved
           reserved26 (26),          -- reserved
           reserved27 (27),          -- reserved
           reserved28 (28),          -- reserved
           reserved29 (29),          -- reserved
           reserved30 (30),          -- reserved
           reflect (31)
          }
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
        "Determines the setting of the Admin Status flags in the
       Admin Status object or TLV, as described in RFC 3471. Setting
       this field to a non-zero value will result in the inclusion of
       the admin status object on signaling messages.

         If the prvtMplsTeMibAllowGracefulDeletion product MIB field
         is set, then the delInProgress flag is
         not writable.  Instead, Use the deletion_mode setting to
         indicate whether Graceful deletion should be used for
         the tunnel.

       This value of this object can be modified when the
       corresponding mplsTunnelRowStatus and mplsTunnelAdminStatus
       is active(1). By doing so, a new signaling message will be
       triggered including the requested Admin Status object or
       TLV."
   REFERENCE
     "Berger, L., et al., Generalized Multi-Protocol Label Switching
      (GMPLS) Signaling Functional Description, RFC 3471,
      January 2003."
   DEFVAL  { { } }
   ::= { mplsTunnelEntry 49 }

mplsTunnelExtraParamsPtr  OBJECT-TYPE
   SYNTAX       RowPointer
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
     "Some Tunnels will run over transports that can usefully support
      technology-specific additional parameters (for example, SONET
      resource usage). Such parameters can be supplied in an external
      table and referenced from here.

      In this implementation of the mplsTunnelTable, the row must either
      be set to zeroDotZero, or must point at an entry in the
      mplsTunnelSonetResTable.

      If a value other than zeroDotZero is used, then
      mplsTunnelResourcePointer must be set to zeroDotZero."
   ::= { mplsTunnelEntry 50 }

mplsTunnelUseEgressLabel OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
      "Whether or not to use an explicit route Label subobject as
       configured in mplsTunnelEgressLabel."
    DEFVAL { false }
   ::= { mplsTunnelEntry 51 }

mplsTunnelEgressLabel OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabel
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "The egress control Label in the explicit route, and its
      length.

      At ingress, this value must be inserted as the last hop of the
      explicit route.

      At egress this is the value of the received Label subobject.
      Since 0 is a valid value, the validity of this field is
      indicated by mplsTunnelUseEgressLabel.

      When this label is used in signaling protocol messages,
      it is copied byte for byte as is.  Therefore, if the label
      octet string is intended to represent multibyte values, it
      should encode those values in network (big-endian) byte
      order.  This interpretation applies in particular to the
      non-generalized MPLS labels (32 bits) used in ATM, FR and
      generic MPLS networks."

   ::= { mplsTunnelEntry 52 }

mplsTunnelEgressLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The C-Type of the egress control Label configured in
        mplsTunnelEgressLabel."
   ::= { mplsTunnelEntry 53 }

mplsTunnelOmitEROIfOneHop OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates whether the explicit route object should be
        omitted from the Path message when the tunnel consists of
        just one loose hop.

        Note that if mplsTunnelHopTableIndex is set to 0, the
        tunnel is routed to the address configured in
        mplsTunnelEgressLSRId.  This avoids the need to configure
        a single loose hop containing the tunnel's destination
        address and setting this field to true."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 54 }

mplsTunnelPrivateData OBJECT-TYPE
   SYNTAX        MplsTunnelPrivateDataSyntax
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This object contains the customer defined private data for
        the forward signaling direction.  At ingress it is
        filled in with the private data present on the MIB SET
        message.  Note that this field can be updated even when
        the Tunnel is OperUp.
        At egress it is filled in with the decoded forward private
        data.
        Note that there is a separate MIB field for the reverse
        signaling direction private data,
        mplsTunnelReversePrivateData."
   ::= { mplsTunnelEntry 55 }

mplsTunnelSrcTNAAddressType OBJECT-TYPE
  SYNTAX         INTEGER {
       none (0),
       ipv4 (1),
       ipv6 (2),
       nsap (3)
  }
  MAX-ACCESS     read-create
  STATUS         current
  DESCRIPTION
      "Type of the source TNA address of this tunnel.  This field
       is used for UNI.  For standard MPLS and GMPLS, this field
       must be set to none."
  DEFVAL        { none }
  ::= { mplsTunnelEntry 56 }

mplsTunnelSrcTNAAddress OBJECT-TYPE
  SYNTAX         MplsTunnelTNAAddress
  MAX-ACCESS     read-create
  STATUS         current
  DESCRIPTION
      "Source TNA address of this tunnel.  This field is only
       valid if mplsTunnelSrcTNAAddressType is not none."
  ::= { mplsTunnelEntry 57 }

mplsTunnelDestTNAAddressType OBJECT-TYPE
  SYNTAX         INTEGER {
       none (0),
       ipv4 (1),
       ipv6 (2),
       nsap (3)
  }
  MAX-ACCESS     read-create
  STATUS         current
  DESCRIPTION
      "Type of the destination TNA address of this tunnel.  This
       field is used for UNI.  For standard MPLS and GMPLS, this
       field must be set to none."
   DEFVAL        { none }
  ::= { mplsTunnelEntry 58 }

mplsTunnelDestTNAAddress OBJECT-TYPE
  SYNTAX         MplsTunnelTNAAddress
  MAX-ACCESS     read-create
  STATUS         current
  DESCRIPTION
      "Destination TNA address of this tunnel.  This field is only
       valid if mplsTunnelDestTNAAddressType is not none."
  ::= { mplsTunnelEntry 59 }

mplsTunnelEndToEndRerouting OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates that Crankback End to End rerouting should be
        enabled on this LSP.  Setting this flag will cause Rerouting
        information to be returned to the ingress node on PathErrs
        and Notifications.

        No Rerouting information will be included if the Path
        Message does not contain an ERO.  Rerouting
        information will be limited to 'Node' errors unless a
        switch managed label space is used."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 60 }

mplsTunnelIsUni OBJECT-TYPE
   SYNTAX       TruthValue
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
       "This flag indicates whether the tunnel is to conform to
        UNI 1.0."

   DEFVAL        { false }
   ::= { mplsTunnelEntry 62 }

mplsTunnelUniServiceLevel OBJECT-TYPE
   SYNTAX       Integer32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
       "Indicates the UNI service level.  It is only valid when
        _is_uni_ is set to true."
   ::= { mplsTunnelEntry 63 }

mplsTunnelUniEgressLabel OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabel
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The label to be used at the destination UNI in the
                 forward direction.

                 This field is only valid if one of mplsTunnelIsUni or
                 mplsTunnelIsSpc is set, and must be filled in if
                 mplsTunnelIsSpc is set."

   ::= { mplsTunnelEntry 64 }

mplsTunnelUniEgressLabelType OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabelType
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The C-Type of the forward label to be used at the
                 destination UNI.

                 This field is only valid if one of mplsTunnelIsUni or
                 mplsTunnelIsSpc is set, and must be filled in if
                 mplsTunnelIsSpc is set."

   ::= { mplsTunnelEntry 65 }

mplsTunnelUniEgressLabelPort OBJECT-TYPE
   SYNTAX       Unsigned32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The logical port identifier used to uniquely identify and
                 select a (forward) data link at the destination UNI.

                 This port identifier is relative to the destination UNI-C
                 for UNI-initiated connections, but is relative to the
                 destination UNI-N for connections that are initiated by
                 management at the source UNI-N.

                 This field is only valid if one of mplsTunnelIsUni or
                 mplsTunnelIsSpc is set, and must be filled in if
                 mplsTunnelIsSpc is set."

   ::= { mplsTunnelEntry 66 }

mplsTunnelUniRvsEgressLabel OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabel
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The label to be used at the destination UNI in the
                 reverse direction.

                 This field is only valid if one of mplsTunnelIsUni or
                 mplsTunnelIsSpc is set, and must be filled in if
                 mplsTunnelIsSpc is set and the tunnel is bi-directional."

   ::= { mplsTunnelEntry 67 }

mplsTunnelUniRvsEgressLabelType OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabelType
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The C-Type of the reverse label to be used at the
                 destination UNI.

                 This field is only valid if one of mplsTunnelIsUni or
                 mplsTunnelIsSpc is set, and must be filled in if
                 mplsTunnelIsSpc is set and the tunnel is bi-directional."

   ::= { mplsTunnelEntry 68 }

mplsTunnelUniRvsEgressLabelPort OBJECT-TYPE
   SYNTAX       Unsigned32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The logical port identifier used to uniquely identify and
                 select a (reverse) data link at the destination UNI.

                 This port identifier is relative to the destination UNI-C
                 for UNI-initiated connections, but is relative to the
                 destination UNI-N for connections that are initiated by
                 management at the source UNI-N.

                 This field is only valid if one of mplsTunnelIsUni or
                 mplsTunnelIsSpc is set, and must be filled in if
                 mplsTunnelIsSpc is set and the tunnel is bi-directional."

   ::= { mplsTunnelEntry 69 }

mplsTunnelDeletionMode OBJECT-TYPE
   SYNTAX       INTEGER {
                     forced(1),
                     graceful(2)
                     }
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "Whether to use forced or graceful deletion to delete this
                 LSP.  This field is ignored if graceful deletion is not
                 allowed in the TE-MIB entity MIB."

   DEFVAL        { forced }
   ::= { mplsTunnelEntry 70 }

mplsTunnelUniDiversityListIndex OBJECT-TYPE
   SYNTAX       Integer32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "UNI specific.  This field references a
                 prvtMplsTunnelUNIDivListIndex in the
                 mplsTunnelUNIDiversityTable, and defines this list of
                 tunnels to be diverse from.  A value of zero indicates
                 that no diversity is configured.

                 Note that if the diversity requirements specified in the
                 referenced diversity list cannot be satisfied by
                 signaling, this tunnel will fail to move to oper_status
                 up.  See the Description in the
                 mplsTunnelUNIDiversityTable for more information."

   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 71 }

mplsTunnelDiffServIndex OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Index into the mplsDiffServTable entry that
          specifies the L-LSP or E-LSP parameters to signal
          when setting up the tunnel.  If this field is not filled
          in or is assigned the value zero then no DiffServ
          parameters are signalled."
   REFERENCE
        "Le Faucher, et. al, MPLS Support of Differentiated
          Services, Internet Draft <draft-ietf-mpls-diff-
          ext-09.txt>, April 2001."
   ::= { mplsTunnelEntry 72 }

mplsTunnelReversePrivateData OBJECT-TYPE
   SYNTAX        MplsTunnelPrivateDataSyntax
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This object contains the customer defined private data for
         the reverse signaling direction.  At egress it is
         initially set by the RRR_EGRESS_TRANSLATE_PRIV_DATA user exit and
         subsequently may be altered via MIB operations.
         At ingress it is filled in with the decoded reverse
         private data.
         Note that there is a separate MIB field for the forward
         signaling direction private data, mplsTunnelPrivateData."
   ::= { mplsTunnelEntry 73 }

mplsTunnelFastRerouteMode OBJECT-TYPE
   SYNTAX        INTEGER {
      noFastReroute(0),
      detourFastReroute(1),
      facilityFastReroute(2)
   }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Indicates whether or not this tunnel should be protected
          by a fast reroute mechanism, and if so which method should
          be used.
          noFastReroute       - no fast reroute protection.
          detourFastReroute   - fast reroute protection using the
                                one-to-one detour backup method.
          facilityFastReroute - fast reroute protection using the
                                facility backup method.
          Fast reroute is only available for uni-directional LSPs."
   DEFVAL        { noFastReroute }
   ::= { mplsTunnelEntry 74 }

mplsTunnelBackupSetupPrio OBJECT-TYPE
   SYNTAX        Integer32 (0..7)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Setup priority for backup tunnels set up to protect this
         tunnel.  This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   ::= { mplsTunnelEntry 75 }

mplsTunnelBackupHoldingPriority OBJECT-TYPE
   SYNTAX        Integer32 (0..7)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Holding priority for backup tunnels set up to protect this
         tunnel.  This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   ::= { mplsTunnelEntry 76 }

mplsTunnelBackupIncAny OBJECT-TYPE
   SYNTAX        MplsTunnelAffinity
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Include-any resource affinity for backup tunnels set up to
         protect this tunnel.
         A link satisfies the include-any constraint if and only if
         the constraint is zero, or the link and the constraint
         have a resource class in common.
         This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 77 }

mplsTunnelBackupIncAll OBJECT-TYPE
   SYNTAX        MplsTunnelAffinity
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Include-all resource affinity for backup tunnels set up to
         protect this tunnel.
         A link satisfies the include-all constraint if and only if
         the link contains all of the adminstrative groups
         specified in the constraint.
         This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 78 }

mplsTunnelBackupExcAny OBJECT-TYPE
   SYNTAX        MplsTunnelAffinity
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Exclude-any resource affinity for backup tunnels set up to
         protect this tunnel.
         A link satisfies the exclude-any constraint if and only if
         the constraint is zero, or the link and the constraint
         have a resource class in common.
         This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 79 }

mplsTunnelBackupBandwidth OBJECT-TYPE
   SYNTAX        MplsBitRate
   UNITS         "1000s of bits per second"
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The estimated bandwidth required for backup tunnels, in
         units of 1000 bits/second.  A value of zero indicates
         best-effort.
         This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 80 }

mplsTunnelBackupMaxHops OBJECT-TYPE
   SYNTAX        Unsigned32(0..255)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The maximum number of extra hops the backup path is
         allowed to take, from a Point of Local Repair (PLR) to a
         Merge Point (MP), with PLR and MP excluded in counting.
         A hop-limit of 0 means only direct links between PLR and MP
         can be used.
         This field is only valid if the mplsTunnelFastRerouteMode
         above is not noFastReroute."
   DEFVAL        { 255 }
   ::= { mplsTunnelEntry 81 }

mplsTunnelIsSpc OBJECT-TYPE
   SYNTAX       TruthValue
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
       "This flag indicates whether the tunnel is an OIF soft
        permanent connection (SPC)."

   DEFVAL        { false }
   ::= { mplsTunnelEntry 84 }

mplsTunnelUniIngressLabel OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabel
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The label to be used for the in-segment at the source
                 UNI-N in the forward direction.

                 This field is only valid if the mplsTunnelIsSpc field
                 is true."

   ::= { mplsTunnelEntry 85 }

mplsTunnelUniIngressLabelType OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabelType
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The C-Type of the forward label to be used for the
                 in-segment at the source UNI-N.

                 This field is only valid if the mplsTunnelIsSpc field
                 is true."

   ::= { mplsTunnelEntry 86 }

mplsTunnelUniIngressLabelPort OBJECT-TYPE
   SYNTAX       Unsigned32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The logical port identifier used to uniquely identify and
                 select a (forward) data link for the in-segment at the
                 source UNI-N.

                 This field is only valid if the mplsTunnelIsSpc field
                 is true."

   ::= { mplsTunnelEntry 87 }

mplsTunnelUniRvsIngrLabel OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabel
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The label to be used at the source UNI-N for the
                 out-segment in the reverse direction.

                 This field is only valid if the mplsTunnelIsSpc field
                 is true."

   ::= { mplsTunnelEntry 88 }

mplsTunnelUniRvsIngrLabelType OBJECT-TYPE
   SYNTAX       MplsGeneralizedLabelType
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The C-Type of the reverse label to be used for the
                 out-segment at the source UNI-N.

                 This field is only valid if the mplsTunnelIsSpc field
                 is true."

   ::= { mplsTunnelEntry 89 }

mplsTunnelUniRvsIngrLabelPort OBJECT-TYPE
   SYNTAX       Unsigned32
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION  "The logical port identifier used to uniquely identify and
                 select a data link for the reverse out-segment at the
                 source UNI-N.

                 This field is only valid if the mplsTunnelIsSpc field
                 is true."

   ::= { mplsTunnelEntry 90 }

mplsTunnelDiffServClassType OBJECT-TYPE
   SYNTAX        Integer32 (0..7)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION   "DiffServ Class-Type of the LSP as defined in
                  draft-ietf-tewg-diff-te-proto-03."

   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 91 }

mplsTunnelExtendedProtection OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates that the requested LSP should use the extended PROTECTION
        object as defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling.
        This is a GMPLS feature, and should only be used when GMPLS will
        be used for this LSP."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 92 }

mplsTunnelProtecting OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates that the requested LSP is a protecting LSP and not a
        working LSP.
        This field is only valid if mplsTunnelExtendedProtection is true."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 93 }

mplsTunnelNotification OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates that the control plane message exchange is only used for
        notification during protection switching.
        This field is only valid if mplsTunnelExtendedProtection is true."
   DEFVAL        { false }
   ::= { mplsTunnelEntry 94 }

mplsTunnelLspProtection OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION

       "This field indicates the level of end-to-end protection
        for this LSP.
        This field is only valid if mplsTunnelExtendedProtection is true.
        A value  of zero indicates that no protection is provided for the
        tunnel.

        This field is not a bitmask; only one LSP protection may be selected.
        See draft-lang-ccamp-gmpls-recovery-e2e-signaling for a
        description of the possible values."
   DEFVAL        { 0 }
   ::= { mplsTunnelEntry 95 }

mplsTunnelAssociatedLspId OBJECT-TYPE
   SYNTAX        MplsTunnelInstanceIndex
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The mplsTunnelInstance of an associated tunnel between the
        same ingress and egress and with the same mplsTunnelIndex.
        If this field is zero, the associated LSP ID is not known,
        or there are multiple.
        This field is only valid if mplsTunnelExtendedProtection is true."
   DEFVAL        { 0 }
::= { mplsTunnelEntry 96 }       

mplsTunnelCallIdType OBJECT-TYPE
   SYNTAX       INTEGER {
                     operatorSpecific(1),
                     globallyUnique(2)
                     }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The C-Type of the following CALL ID.  This field is
        insignificant if the mplsTunnelCallId has zero length.
        This field can only be changed when the Admin Status is down."
   ::= { mplsTunnelEntry 97 }

mplsTunnelCallId OBJECT-TYPE
   SYNTAX        OCTET STRING (SIZE (0..255))
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The CALL ID to be used on this tunnel, including the
        address type, International and National segment (if applicable),
        source transport network element address, and Local
        Identifier as defined in G.7713.2 (version 0.8).
        This field can only be changed when the Admin Status is down."
   ::= { mplsTunnelEntry 98 }

mplsTunnelIsIpv6 OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Flag indicating whether this tunnel uses IPv6 addresses.
        If this flag is set, the tunnel may only be activated if
        - TE-MIB is configured to allow IPv6 tunnels
        - the hop path index is non-zero
        - all hops in the hop path have IPv6 addresses
        - the first and last hops in the hop path have global
          scope addresses."
   DEFVAL { false }
   ::= {mplsTunnelEntry 100}

mplsTunnelMtu OBJECT-TYPE
    SYNTAX        Integer32
  	MAX-ACCESS    read-create
   	STATUS        current
   	DESCRIPTION
       "Maximal transfer unit of the tunnel"
::= { mplsTunnelEntry 103 }

mplsTunnelRebuildTimer OBJECT-TYPE
    SYNTAX        TimeTicks
  	MAX-ACCESS    read-create
   	STATUS        current
   	DESCRIPTION
       "Defines a period in minutes (0..1440), after which the tunnel will be unconditionally
        rebuild. The maximal valid value is 1440 minutes (24 hours)"
   	DEFVAL { 60 }
::= { mplsTunnelEntry 104 }

mplsTunnelOperStatusFlags OBJECT-TYPE
    SYNTAX        BITS { empty(0), 
                         tunnelResignalling(1), 
                         tunnelSuppressed(2)
                       }
  	MAX-ACCESS    read-create
   	STATUS        current
   	DESCRIPTION
       "Flags to extend the information of the tunnel state
For the behaviour - bits meaning:
tunnelResignalling (1) - This status shows that currently the tunnel 
has been resignalled. The resignalling state of a tunnel 
should be considered together with the mplsTunnelOperStatus 
attribute value of the same tunnel.
tunnelSuppressed (2) - This status shows that the tunnel has 
been established, but higher priority tunnel is active 
and in use. This tunnel can be activated, once the higher 
protocol tunnel fails by any reason, and in this case 
the tunnelSuppressed status will be cleared.
		 "

::= { mplsTunnelEntry 105 }

mplsTunnelGuardedDest OBJECT-TYPE
    SYNTAX        InetAddressIPv4
  	MAX-ACCESS    read-create
   	STATUS        current
   	DESCRIPTION
       "The guarded destination object specifies which IP destination address the current
        tunnel protects used with the fast reroute feature.
       The tunnel must not be fast reroute enabled."
::= { mplsTunnelEntry 106 }

mplsTunnelMBBTimeOut OBJECT-TYPE
    SYNTAX        Integer32
  	MAX-ACCESS    read-create
   	STATUS        current
   	DESCRIPTION
       "Specifies the timer configuration (in minutes) for Make-before-break (MBB).
        The default value of this object is 10 minutes."
::= { mplsTunnelEntry 107 }

-- End Addition

-- End of mplsTunnelTable

-- Addition
mplsTunnelHopIndexNextTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_HOPNI
   SYNTAX        SEQUENCE OF MplsTunnelHopIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table contains the next available values of
        mplsTunnelHopIndex for all entities."
   ::= { mplsTeObjects 3 }

mplsTunnelHopIndexNextEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelHopIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table represents the next available
        mplsTunnelHopIndex for a specific TE-MIB entity.
        This MIB table is indexed by the PRVT-TE-MIB entity Index."

   INDEX  { prvtMplsTeMibEntityIndex }
      ::= { mplsTunnelHopIndexNextTable 1 }

MplsTunnelHopIndexNextEntry ::= SEQUENCE {
      mplsTunnelHopIndexNextIndex        Unsigned32
    }
-- End Addition

mplsTunnelHopIndexNextIndex OBJECT-TYPE
   SYNTAX        Unsigned32 (0..2147483647)
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This object contains an appropriate value to be used
          for mplsTunnelHopListIndex when creating entries in
          the mplsTunnelHopTable.  If the number of
          unassigned entries is exhausted, a retrival
          operation will return a value of 0.  This object
          may also return a value of 0 when the LSR is unable
          to accept conceptual row creation, for example, if
          the mplsTunnelHopTable is implemented as read-only.
          To obtain the value of mplsTunnelHopListIndex for a
          new entry in the mplsTunnelHopTable, the manager
          issues a management protocol retrieval operation to
          obtain the current value of mplsTunnelHopIndex.
          After each retrieval operation, the agent should
          modify the value to reflect the next unassigned
          index.  After a manager retrieves a value the agent
          will determine through its local policy when this
          index value will be made available for reuse."
   ::= { mplsTunnelHopIndexNextEntry 1 }

mplsTunnelHopTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_HOP
   SYNTAX        SEQUENCE OF MplsTunnelHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelHopTable is used to indicate the hops,
          strict or loose, for an MPLS tunnel defined in
          mplsTunnelTable, when it is established via
          signaling, for the outgoing direction of the
          tunnel.  Each row in this table is indexed by
          mplsTunnelHopListIndex.  Each row also has a
          secondary index mplsTunnelHopIndex corresponding to
          the next hop that this row corresponds to.  The
          first row in the table is the first hop after the
          origination point of the tunnel.  In case we want
          to specify a particular interface on the
          originating LSR of an outgoing tunnel by which we
          want packets to exit the LSR, we specify this as
          the first hop for this tunnel in
          mplsTunnelHopTable."
   ::= { mplsTeObjects 4 }

mplsTunnelHopEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a tunnel hop.  An
          entry is created by a network administrator for
          signaled ERLSP set up by an MPLS signaling
          protocol."
   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelHopListIndex,
           mplsTunnelHopPathOptionIndex, mplsTunnelHopIndex }
      ::= { mplsTunnelHopTable 1 }

MplsTunnelHopEntry ::= SEQUENCE {
      mplsTunnelHopListIndex                     MplsPathIndex,
      mplsTunnelHopPathOptionIndex               MplsPathIndex,
      mplsTunnelHopIndex                         MplsPathIndex,
      mplsTunnelHopAddrType                      TeHopAddressType,
      mplsTunnelHopIpAddr                        TeHopAddress,
      mplsTunnelHopIpPrefixLen                   Unsigned32,
      mplsTunnelHopAsNumber                      TeHopAddressAS,
      mplsTunnelHopAddrUnnum                     TeHopAddressUnnum,
      mplsTunnelHopLspId                         MplsLSPID,
      mplsTunnelHopType                          INTEGER,
      mplsTunnelHopInclude                       TruthValue,
      mplsTunnelHopPathOptionName                DisplayString,
      mplsTunnelHopEntryPathComp                 INTEGER,
      mplsTunnelHopRowStatus                     RowStatus,
      mplsTunnelHopStorageType                   StorageType,
      mplsTunnelHopLabelStatuses                 BITS,
      mplsTunnelHopExpLabelType                  MplsGeneralizedLabelType,
      mplsTunnelHopExpLabel                      MplsGeneralizedLabel,
      mplsTunnelHopExpRvrsLabelType              MplsGeneralizedLabelType,
      mplsTunnelHopExpRvrsLabel                  MplsGeneralizedLabel
   }

mplsTunnelHopListIndex OBJECT-TYPE
   SYNTAX         MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Primary index into this table identifying a
          particular explicit route object."
   ::= { mplsTunnelHopEntry 1 }

mplsTunnelHopPathOptionIndex OBJECT-TYPE
   SYNTAX        MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Secondary index into this table identifying a
          particular group of hops representing a particular
          configured path. This is otherwise known as a path
          option."
   ::= { mplsTunnelHopEntry 2 }

mplsTunnelHopIndex OBJECT-TYPE
   SYNTAX        MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Secondary index into this table identifying a
          particular hop."
   ::= { mplsTunnelHopEntry 3 }

mplsTunnelHopAddrType OBJECT-TYPE
    SYNTAX        TeHopAddressType
   MAX-ACCESS    read-create
   STATUS        current
    DESCRIPTION  "The Hop Address Type of this tunnel hop.

                  The value of this object cannot be changed
                  if the value of the corresponding
                  mplsTunnelHopRowStatus object is 'active'.

                  Note that lspid(5) is a valid option only
                  for tunnels signaled via CRLDP.
                 "
    DEFVAL        { 1 }
   ::= { mplsTunnelHopEntry 4 }

mplsTunnelHopIpAddr OBJECT-TYPE
    SYNTAX        TeHopAddress
   MAX-ACCESS    read-create
   STATUS        current
    DESCRIPTION  "The Tunnel Hop Address for this tunnel hop.

                  The type of this address is determined by the
                  value of the corresponding mplsTunnelHopAddrType.

                  The value of this object cannot be changed
                  if the value of the corresponding
                  mplsTunnelHopRowStatus object is 'active'.
                 "
   ::= { mplsTunnelHopEntry 5 }

 mplsTunnelHopIpPrefixLen OBJECT-TYPE
    SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
    DESCRIPTION  "If mplsTunnelHopAddrType is set to ipv4(1) or
                  ipv6(2), then this value will contain an
                  appropriate prefix length for the IP address in
                  object mplsTunnelHopIpAddr. Otherwise this value
                  is irrelevant and should be ignored.
                 "
    DEFVAL         { 32 }
   ::= { mplsTunnelHopEntry 6 }

mplsTunnelHopAsNumber OBJECT-TYPE
   SYNTAX        TeHopAddressAS
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "If mplsTunnelHopAddrType is set to asnumber(3), then
          this value will contain the AS number of this hop.
          Otherwise the agent should set this object to zero-
          length string and the manager should ignore this."
   ::= { mplsTunnelHopEntry 7 }

mplsTunnelHopAddrUnnum OBJECT-TYPE
   SYNTAX        TeHopAddressUnnum
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "If mplsTunnelHopAddrType is set to unnum(4) or
          unnumv6(6), then this value will contain the interface
          identifier of the unnumbered interface for this hop.
          This object should be used in conjunction with
          mplsTunnelHopIpAddress which would contain the LSR
          Router ID in this case. Otherwise the agent should
          set this object to zero-length string and the
          manager should ignore this."
   ::= { mplsTunnelHopEntry 8 }

mplsTunnelHopLspId OBJECT-TYPE
   SYNTAX        MplsLSPID
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "If mplsTunnelHopAddrType is set to lspid(5), then
          this value will contain the LSPID of a tunnel of
          this hop. The present tunnel being configured is
          tunneled through this hop (using label stacking).
          This object is otherwise insignificant and should
          contain a value of 0 to indicate this fact."
   ::= { mplsTunnelHopEntry 9 }

mplsTunnelHopType OBJECT-TYPE
   SYNTAX        INTEGER {
                      strict(1),
                      loose(2)
                     }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Denotes whether this tunnel hop is routed in a
          strict or loose fashion. The value of this object
          has no meaning if the mplsTunnelHopInclude object
          is set to 'false'."
   DEFVAL { 2 }
   ::= { mplsTunnelHopEntry 10 }

mplsTunnelHopInclude OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "If this value is set to true, then this indicates
          that this hop must be included in the tunnel's
          path. If this value is set to 'false', then this hop
          must be avoided when calculating the path for this
          tunnel. The default value of this object is 'true',
          so that by default all indicated hops are included
          in the CSPF path computation. If this object is set
          to 'false' the value of mplsTunnelHopType should be
          ignored."
   DEFVAL { true }
   ::= { mplsTunnelHopEntry 11 }

mplsTunnelHopPathOptionName OBJECT-TYPE
   SYNTAX        DisplayString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The description of this series of hops as they
          relate to the specified path option. The
          value of this object SHOULD be the same for
          each hop in the series that comprises a
          path option."
   ::= { mplsTunnelHopEntry 12 }

mplsTunnelHopEntryPathComp OBJECT-TYPE
   SYNTAX        INTEGER {
                      dynamic(1),    -- CSPF computed
                      explicit(2)    -- strict hop
                  }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "If this value is set to dynamic, then the user
          should only specify the source and destination of
          the path and expect that the CSPF will calculate
          the remainder of the path.  If this value is set to
          explicit, the user should specify the entire path
          for the tunnel to take.  This path may contain
          strict or loose hops.  Each hop along a specific
          path SHOULD have this object set to the same value."
   ::= { mplsTunnelHopEntry 13 }

mplsTunnelHopRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create, modify, and/or
          delete a row in this table.  When a row in this
          table is in active(1) state, no objects in that row
          can be modified by the agent except
          mplsTunnelHopRowStatus and
          mplsTunnelHopStorageType."
   ::= { mplsTunnelHopEntry 14 }

mplsTunnelHopStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The storage type for this Hop entry. Conceptual
         rows having the value 'permanent' need not
         allow write-access to any columnar objects
         in the row."
   DEFVAL { 2 }
   ::= { mplsTunnelHopEntry 15 }

mplsTunnelHopLabelStatuses OBJECT-TYPE
   SYNTAX  BITS {
     forwardPresent (0),
     reversePresent (1)
   }
   MAX-ACCESS read-only
   STATUS  current
   DESCRIPTION
     "This bitmask indicates the presence of labels indicated by the
      mplsTunnelHopExpLabel and mplsTunnelHopExpRvrsLabel
      objects.

      For the Present bits, a set bit indicates that a label is
      present for this hop in the route. This allows zero to be a
      valid label value."
   DEFVAL  { { } }
 ::= { mplsTunnelHopEntry 16 }

mplsTunnelHopExpLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Denotes   the  type  of  the  label  configured  in
        mplsTunnelHopExpLabel."
   ::= { mplsTunnelHopEntry 17 }

mplsTunnelHopExpLabel OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabel
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "If mplsTunnelHopLabelStatuses object indicates that a forward
      label is present then the label to use on this hop is found in
      this object."
 ::= { mplsTunnelHopEntry 18 }

mplsTunnelHopExpRvrsLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Denotes   the  type  of  the  label  configured  in
        mplsTunnelHopExpRvrsLabel."
   ::= { mplsTunnelHopEntry 19 }

mplsTunnelHopExpRvrsLabel OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabel
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "If the mplsTunnelHopLabelStatuses object indicates that a
      reverse label is present then the label to use on this
      hop is found in this object."
 ::= { mplsTunnelHopEntry 20 }

-- End of mplsTunnelHopTable

-- Begin of mplsTunnelResourceTable

-- Addition
mplsTunnelResourceIndexNextTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_RESNI
   SYNTAX        SEQUENCE OF MplsTunnelResourceIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table contains the next available values of
        mplsTunnelResourceIndex for all entities."
   ::= { mplsTeObjects 5 }

mplsTunnelResourceIndexNextEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelResourceIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table represents the next available
        mplsTunnelResourceIndex for a specific TE-MIB entity.
        This MIB table is indexed by the PRVT-TE-MIB entity Index."

   INDEX  { prvtMplsTeMibEntityIndex }
      ::= { mplsTunnelResourceIndexNextTable 1 }

MplsTunnelResourceIndexNextEntry ::= SEQUENCE {
      mplsTunnelResourceIndexNextIndex  Unsigned32
    }
-- End Addition

mplsTunnelResourceIndexNextIndex OBJECT-TYPE
   SYNTAX        Unsigned32 (0.. 2147483647)
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This object contains the next appropriate value to
          be used for mplsTunnelResourceIndex when creating
          entries in the mplsTunnelResourceTable. If the
          number of unassigned entries is exhausted, a
          retrival operation will return a value of 0.  This
          object may also return a value of 0 when the LSR is
          unable to accept conceptual row creation, for
          example, if the mplsTunnelTable is implemented as
          read-only.  To obtain the mplsTunnelResourceIndex
          value for a new entry, the manager must first issue
          a management protocol retrieval operation to obtain
          the current value of this object. The agent should
          modify the value to reflect the next unassigned
          index after each retrieval operation. After a
          manager retrieves a value the agent will determine
          through its local policy when this index value will
          be made available for reuse."
   ::= { mplsTunnelResourceIndexNextEntry 1 }

mplsTunnelResourceTable OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_RES
   SYNTAX        SEQUENCE OF MplsTunnelResourceEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelResourceTable allows a manager to
          specify which resources are desired for an MPLS
          tunnel.  This table also allows several tunnels to
          point to a single entry in this table, implying
          that these tunnels should share resources."
   ::= { mplsTeObjects 6 }

mplsTunnelResourceEntry OBJECT-TYPE
   SYNTAX        MplsTunnelResourceEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a set of resources
          for an MPLS tunnel.  An entry can be created by a
          network administrator or by an SNMP agent as
          instructed by any MPLS signaling protocol."
   INDEX  { prvtMplsTeMibEntityIndex, mplsTunnelResourceIndex }
      ::= { mplsTunnelResourceTable 1 }

MplsTunnelResourceEntry ::= SEQUENCE {
      mplsTunnelResourceIndex                Unsigned32,
      mplsTunnelResourceMaxRate              MplsBitRate,
      mplsTunnelResourceMeanRate             MplsBitRate,
      mplsTunnelResourceMaxBurstSize         MplsBurstSize,
      mplsTunnelResourceMeanBurstSize        MplsBurstSize,
      mplsTunnelResourceExBurstSize          MplsBurstSize,
      mplsTunnelResourceFrequency            INTEGER,
      mplsTunnelResourceWeight               Unsigned32,
      mplsTunnelResourceRowStatus            RowStatus,
      mplsTunnelResourceStorageType          StorageType
   }

mplsTunnelResourceIndex OBJECT-TYPE
   SYNTAX        Unsigned32 (1..2147483647)
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Uniquely identifies this row."
   ::= { mplsTunnelResourceEntry 1 }

mplsTunnelResourceMaxRate OBJECT-TYPE
   SYNTAX        MplsBitRate
   UNITS         "1000s of bits per second"
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The maximum rate in units of 1000 bits/second.

         Note that setting mplsTunnelResourceMaxRate,
          mplsTunnelResourceMeanRate, and
          mplsTunnelResourceMaxBurstSize to 0 indicates best-effort
          treatment.  This object is copied to an instance of
          mplsTrafficParamMaxRate in mplsTrafficParamTable the OID
          of which is copied into the corresponding
          mplsInSegmentTrafficParamPtr.

         If the ingress node sets a maximum rate of positive
          infinity, the egress node will return a value of
          positive infinity on the MIB GET response.  This
          special value may not be used when setting the maximum
          rate with this MIB."
   DEFVAL        { 0 }
   ::= { mplsTunnelResourceEntry 2 }

mplsTunnelResourceMeanRate OBJECT-TYPE
   SYNTAX        MplsBitRate
   UNITS         "1000s of bits per second"
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The mean rate in units of 1000 bits/second.

         This object is copied into an instance of
          mplsTrafficParamMeanRate in the
          mplsTrafficParamTable. The OID of this table entry
          is then copied into the corresponding
          mplsInSegmentTrafficParamPtr.

         When resource allocation is performed as requested
          by this TSpec object, it is copied into an entry in
          mplsTrafficParamTable [LSRMIB]:
          mplsTunnelInMeanRate to mplsTrafficParamMeanRate.
          The OID of this entry is copied to
          mplsInSegmentTrafficParamPtr of the corresponding
          in-segment entry."
   DEFVAL        { 0 }
   ::= { mplsTunnelResourceEntry 3 }

mplsTunnelResourceMaxBurstSize OBJECT-TYPE
   SYNTAX        MplsBurstSize
   UNITS         "bytes"
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The maximum burst size in bytes.  This object is
          copied to mplsInSegmentMaxBurstSize of the
          corresponding in-segment.

         When resource allocation is performed as requested
          by this TSpec object, it is copied into an entry in
          mplsTrafficParamTable [LSRMIB]:
          mplsTunnelInMaxBurstSize to
          mplsTrafficParamMaxBurstSize. The OID of this entry
          is copied to mplsInSegmentTrafficParamPtr of the
          corresponding in-segment entry."
   DEFVAL        { 0 }
   ::= { mplsTunnelResourceEntry 4 }

mplsTunnelResourceMeanBurstSize OBJECT-TYPE
   SYNTAX       MplsBurstSize
   UNITS        "bytes"
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
        "The mean burst size in bytes.  The implementations
          which do not implement this variable must return 0
          for this value and must not allow a user to set
          this value."
   DEFVAL        { 0 }
   ::= { mplsTunnelResourceEntry 5 }

mplsTunnelResourceExBurstSize OBJECT-TYPE
   SYNTAX       MplsBurstSize
   UNITS        "bytes"
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
        "The Excess burst size in bytes.  The implementations
          which do not implement this variable must return
          noSuchObject(0) exception for this object and must
          not allow a user to set this value."
   REFERENCE
        "CR-LDP Specification, Section 4.3."
   DEFVAL        { 0 }
   ::= { mplsTunnelResourceEntry 6 }

mplsTunnelResourceFrequency  OBJECT-TYPE
   SYNTAX       INTEGER {
                     unspecified(1),
                     frequent(2),
                     veryFrequent(3)
                 }
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
        "The granularity of the availability of committed
          rate.  The implementations which do not implement
          this variable must return unspecified(1) for this
          value and must not allow a user to set this value."
   DEFVAL        { unspecified }
   ::= { mplsTunnelResourceEntry 7 }

mplsTunnelResourceWeight    OBJECT-TYPE
   SYNTAX       Unsigned32(0..255)
   MAX-ACCESS   read-create
   STATUS       current
   DESCRIPTION
        "The relative weight for using excess bandwidth above
          its committed rate.  The value of 0 means that
          weight is not applicable for the CR-LSP."
   DEFVAL        { 0 }
   ::= { mplsTunnelResourceEntry 8 }

mplsTunnelResourceRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create, modify, and/or
          delete a row in this table."
   ::= { mplsTunnelResourceEntry 9 }

mplsTunnelResourceStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable indicates the storage type for this
          object."
   DEFVAL        { 2 }
   ::= { mplsTunnelResourceEntry 10 }

-- End mplsTunnelResourceTable

-- Tunnel Actual Route Hop table.

mplsTunnelARHopTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_ARHOP
   SYNTAX        SEQUENCE OF MplsTunnelARHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelARHopTable is used to indicate the
          hops, strict or loose, for an MPLS tunnel defined
          in mplsTunnelTable, as reported by the MPLS
          signaling protocol, for the outgoing direction of
          the tunnel.  Each row in this table is indexed by
          mplsTunnelARHopListIndex.  Each row also has a
          secondary index mplsTunnelARHopIndex, corresponding
          to the next hop that this row corresponds to.  The
          first row in the table is the first hop after the
          origination point of the tunnel.  In case we want
          to specify a particular interface on the
          originating LSR of an outgoing tunnel by which we
          want packets to exit the LSR, we specify this as
          the first hop for this tunnel in
          mplsTunnelARHopTable.

         Please note that since the information necessary to
          build entries within this table are not provided by
          some MPLS signaling protocols, implementation of
          this table is optional. Furthermore, since the
          information in this table is actually provided by
          the MPLS signaling protocol after the path has been
          set-up, the entries in this table are provided only
          for observation, and hence, all variables in this
          table are accessible exclusively as read-only."
   ::= { mplsTeObjects 7 }

mplsTunnelARHopEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelARHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a tunnel hop.  An
          entry is created by a network administrator for
          signaled ERLSP set up by an MPLS signaling
          protocol."
   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelARHopListIndex,
           mplsTunnelARHopIndex }
      ::= { mplsTunnelARHopTable 1 }

MplsTunnelARHopEntry ::= SEQUENCE {
      mplsTunnelARHopListIndex          MplsPathIndex,
      mplsTunnelARHopIndex              MplsPathIndex,
      mplsTunnelARHopAddrType           TeHopAddressType,
      mplsTunnelARHopIpAddr             TeHopAddress,
      mplsTunnelARHopAddrUnnum          TeHopAddressUnnum,
      mplsTunnelARHopLspId              MplsLSPID,
-- Addition
      mplsTunnelARHopLabelStatuses      BITS,
      mplsTunnelARHopExpLabelType       MplsGeneralizedLabelType,
      mplsTunnelARHopExpLabel           MplsGeneralizedLabel,
      mplsTunnelARHopExpRvrsLabelType   MplsGeneralizedLabelType,
      mplsTunnelARHopExpRvrsLabel       MplsGeneralizedLabel,
      mplsTunnelARHopProtection         BITS
-- End Addition
   }

mplsTunnelARHopListIndex OBJECT-TYPE
   SYNTAX        MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Primary index into this table identifying a
          particular recorded hop list."
   ::= { mplsTunnelARHopEntry 1 }

mplsTunnelARHopIndex OBJECT-TYPE
   SYNTAX        MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Secondary index into this table identifying the
          particular hop."
   ::= { mplsTunnelARHopEntry 2 }


mplsTunnelARHopAddrType OBJECT-TYPE
   SYNTAX        TeHopAddressType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The Hop Address Type of this tunnel hop.

         If the type value is set to ipv4(1) or ipv6(2). The tunnel path 
         can be determin using mplsTunnelARHopIpAddr object.  
         mplsTunnelARHopAddrUnnum and mplsTunnelARHopLspId 
         should not be used.
         
         If the type value is set to unnum(4) or unnumv6(6). The tunnel path 
         can be determin using mplsTunnelARHopAddrUnnum object.  
         mplsTunnelARHopIpAddr and mplsTunnelARHopLspId 
         should not be used.

         Note that lspid(5) is a valid option only
         for tunnels signaled via CRLDP. The tunnel path 
         can be determin using mplsTunnelARHopLspId object.  
         mplsTunnelARHopIpAddr and mplsTunnelARHopAddrUnnum 
         should not be used.
         
         Currently only ipv4(1) type is supported"
   DEFVAL        { 1 }
   ::= { mplsTunnelARHopEntry 3 }

mplsTunnelARHopIpAddr OBJECT-TYPE
   SYNTAX        TeHopAddress
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The Tunnel Hop Address for this tunnel hop.

         The type of this address is determined by the
         value of the corresponding mplsTunnelARHopAddrType.
         If mplsTunnelARHopAddrType is set to ipv4(1) or
         ipv6(2), then this value contains the LSR Router
         ID of the unnumbered interface. Otherwise the agent
         SHOULD set this object to the zero-length string
         and the manager should ignore this object."
   ::= { mplsTunnelARHopEntry 4 }

mplsTunnelARHopAddrUnnum OBJECT-TYPE
   SYNTAX        TeHopAddressUnnum
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "If mplsTunnelARHopAddrType is set to unnum(4) or
         unnumv6(6), then this value will contain the
         interface identifier of the unnumbered interface
         for this hop. This object should be used in
         conjunction with mplsTunnelARHopIpAddr which would
         contain the LSR Router ID in this case. Otherwise
         the agent should set this object to zero-length
         string and the manager should ignore this."
   ::= { mplsTunnelARHopEntry 5 }

mplsTunnelARHopLspId OBJECT-TYPE
   SYNTAX        MplsLSPID
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "If mplsTunnelARHopAddrType is set to lspid(5), then
          this value will contain the LSP ID of this hop.
          This object is otherwise insignificant and should
          contain a value of 0 to indicate this fact."
   ::= { mplsTunnelARHopEntry 6 }

-- Addition

mplsTunnelARHopLabelStatuses OBJECT-TYPE
   SYNTAX        BITS {
     forwardPresent (0),
     reversePresent (1),
     forwardGlobal (2),
     reverseGlobal (3)
   }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
     "This bitmask indicates the presence and status of labels
      indicated by the mplsTunnelARHopExpLabel and
      mplsTunnelARHopExpRvrsLabel objects.

      For the Present bits, a set bit indicates that a label is
      present for this hop in the route. For the Global bits, a set
      bit indicates that the label comes from the Global Label Space.
      A clear bit indicates that this is a Per- Interface label. A
      Global bit only has meaning if the corresponding Present bit is
                         set."
 ::= { mplsTunnelARHopEntry 7 }

mplsTunnelARHopExpLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The C-Type of the following hop label.  This field is
        insignificant unless mplsTunnelARHopLabelStatuses has the
        forwardPresent(0) or forwardGlobal(2) bits set."
   ::= { mplsTunnelARHopEntry 8 }

mplsTunnelARHopExpLabel OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabel
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
     "If mplsTunnelARHopLabelStatus has the present(0) bit set,
      then this value indicates the label value used for this hop.
      This object is otherwise insignificant and should
      contain a value of 0.

      When this label is read from a signaling protocol message,
      it is copied byte for byte as is.  Therefore, if the label
      octet string is understood to represent multibyte values,
      it encodes those values in network (big-endian) byte
      order.  This interpretation applies in particular to the
      non-generalized MPLS labels (32 bits) used in ATM, FR and
      generic MPLS networks."

   ::= { mplsTunnelARHopEntry 9 }

mplsTunnelARHopExpRvrsLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The C-Type of the following hop label.  This field is
        insignificant unless mplsTunnelARHopLabelStatuses has the
        reversePresent(1) or reverseGlobal(3) bits set."
   ::= { mplsTunnelARHopEntry 10 }

mplsTunnelARHopExpRvrsLabel OBJECT-TYPE
   SYNTAX  MplsGeneralizedLabel
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
     "If the mplsTunnelARHopLabelStatuses object indicates that a
      reverse label is present then the label in use on this
      hop is found in this object."
 ::= { mplsTunnelARHopEntry 11 }

mplsTunnelARHopProtection  OBJECT-TYPE
   SYNTAX  BITS {
     localAvailable (0),
     localInUse (1)
   }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
    "Availability and usage of protection on the reported link.

     localAvailable
        Indicates that the link downstream of this node is protected
        via a local repair mechanism.

     localInUse
        Indicates that a local repair mechanism is in use to maintain
        this tunnel (usually in the face of an outage of the link it
        was previously routed over)."
 ::= { mplsTunnelARHopEntry 12 }

-- End Addition

-- End of mplsTunnelARHopTable


-- Tunnel Computed Hop table.

mplsTunnelCHopTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_CHOP
   SYNTAX        SEQUENCE OF MplsTunnelCHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelCHopTable is used to indicate the
          hops, strict or loose, for an MPLS tunnel defined
          in mplsTunnelTable, as computed by a constraint-
          based routing protocol, based on the
          mplsTunnelHopTable for the outgoing direction of
          the tunnel.  Each row in this table is indexed by
          mplsTunnelCHopListIndex.  Each row also has a
          secondary index mplsTunnelCHopIndex, corresponding
          to the next hop that this row corresponds to.  The
          first row in the table is the first hop after the
          origination point of the tunnel.  In case we want
          to specify a particular interface on the
          originating LSR of an outgoing tunnel by which we
          want packets to exit the LSR, we specify this as
          the first hop for this tunnel in
          mplsTunnelCHopTable.

         Please note that since the information necessary to
          build entries within this table may not be
          supported by some LSRs, implementation of this
          table is optional. Furthermore, since the
          information in this table is actually provided by
          routing protocol after the path has been computed,
          the entries in this table are provided only for
          observation, and hence, all variables in this table
          are accessible exclusively as read-only."
   ::= { mplsTeObjects 8 }

mplsTunnelCHopEntry  OBJECT-TYPE
   SYNTAX        MplsTunnelCHopEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a tunnel hop.  An
          entry in this table is created by a constraint-
          based routing protocol based on the hops specified
          in the corresponding mplsTunnelHopTable."
   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelCHopListIndex,
           mplsTunnelCHopIndex }
      ::= { mplsTunnelCHopTable 1 }

MplsTunnelCHopEntry ::= SEQUENCE {
      mplsTunnelCHopListIndex                 MplsPathIndex,
      mplsTunnelCHopIndex                     MplsPathIndex,
      mplsTunnelCHopAddrType                  TeHopAddressType,
      mplsTunnelCHopIpAddr                    TeHopAddress,
      mplsTunnelCHopIpPrefixLen               Unsigned32,
      mplsTunnelCHopAsNumber                  TeHopAddressAS,
      mplsTunnelCHopAddrUnnum                 TeHopAddressUnnum,
      mplsTunnelCHopLspId                     MplsLSPID,
      mplsTunnelCHopType                      INTEGER,
      mplsTunnelCHopLabelStatuses             BITS,
      mplsTunnelCHopExpLabelType              MplsGeneralizedLabelType,
      mplsTunnelCHopExpLabel                  MplsGeneralizedLabel,
      mplsTunnelCHopExpRvrsLabelType          MplsGeneralizedLabelType,
      mplsTunnelCHopExpRvrsLabel              MplsGeneralizedLabel
   }

mplsTunnelCHopListIndex OBJECT-TYPE
   SYNTAX        MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Primary index into this table identifying a
          particular computed hop list."
   ::= { mplsTunnelCHopEntry 1 }

mplsTunnelCHopIndex OBJECT-TYPE
   SYNTAX        MplsPathIndex
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Secondary index into this table identifying the
          particular hop."
   ::= { mplsTunnelCHopEntry 2 }

mplsTunnelCHopAddrType OBJECT-TYPE
   SYNTAX        TeHopAddressType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The Hop Address Type of this tunnel hop.

         Note that lspid(5) is a valid option only
         for tunnels signaled via CRLDP."
   DEFVAL        { 1 }
   ::= { mplsTunnelCHopEntry 3 }

mplsTunnelCHopIpAddr OBJECT-TYPE
   SYNTAX        TeHopAddress
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The Tunnel Hop Address for this tunnel hop.

         The type of this address is determined by the
          value of the corresponding mplsTunnelCHopAddrType.

         If mplsTunnelCHopAddrType is set to unnum(4) or
         unnumv6(6), then this value will contain the LSR
         Router ID of the unnumbered interface. Otherwise
         the agent should set this object to the zero-length
         string and the manager SHOULD ignore this object."
   ::= { mplsTunnelCHopEntry 4 }

mplsTunnelCHopIpPrefixLen OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
         "If mplsTunnelCHopAddrType is set to ipv4(1) or
           ipv6(2), then this value will contain an
           appropriate prefix length for the IP address in
           object mplsTunnelCHopIpAddr. Otherwise this value
           is irrelevant and should be ignored.
          "
    DEFVAL         { 32 }
   ::= { mplsTunnelCHopEntry 5 }

mplsTunnelCHopAsNumber OBJECT-TYPE
   SYNTAX        TeHopAddressAS
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "If mplsTunnelCHopAddrType is set to asnumber(3),
          then this value will contain the AS number of this
          hop. Otherwise the agent should set this object to
          zero-length string and the manager should ignore
          this."
   ::= { mplsTunnelCHopEntry 6 }

mplsTunnelCHopAddrUnnum OBJECT-TYPE
   SYNTAX        TeHopAddressUnnum
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "If mplsTunnelCHopAddrType is set to unnum(4) or
          unnumv6(6), then this value will contain the unnumbered
          interface identifier of this hop. This object should
          be used in conjunction with mplsTunnelCHopIpAddr
          which would contain the LSR Router ID in this case.
          Otherwise the agent should set this object to zero-
          length string and the manager should ignore this."
   ::= { mplsTunnelCHopEntry 7 }

mplsTunnelCHopLspId OBJECT-TYPE
   SYNTAX        MplsLSPID
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "If mplsTunnelCHopAddrType is set to lspid(5), then
          this value will contain the LSP ID of this hop.
          This object is otherwise insignificant and should
          contain a value of 0 to indicate this fact."
   ::= { mplsTunnelCHopEntry 8 }

mplsTunnelCHopType OBJECT-TYPE
   SYNTAX        INTEGER { strict(1),
                           loose(2)
                          }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Denotes whether this is tunnel hop is routed in a
          strict or loose fashion."
   ::= { mplsTunnelCHopEntry 9 }

mplsTunnelCHopLabelStatuses OBJECT-TYPE
   SYNTAX  BITS {
      forwardPresent (0),
      reversePresent (1)
   }
   MAX-ACCESS read-only
   STATUS  current
   DESCRIPTION
     "This bitmask indicates the presence of labels indicated by the
      mplsTunnelCHopExpLabel and mplsTunnelCHopExpRvrsLabel
      objects.
      A set bit indicates that a label is present for this hop in the
      route thus allowing zero to be a valid label value."
   ::= { mplsTunnelCHopEntry 11 }

mplsTunnelCHopExpLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The C-Type of the following hop label. This field is
        insignificant unless mplsTunnelCHopLabelStatuses has the
        forwardPresent(0) bit set."
   ::= { mplsTunnelCHopEntry 12 }

mplsTunnelCHopExpLabel OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabel
   MAX-ACCESS read-only
   STATUS        current
   DESCRIPTION
        "The  explicit  out-segment  label  to  use  on  the
        forward path.

        When this label is used in signaling protocol messages,
        it is copied byte for byte as is.  Therefore, if the label
        octet string is intended to represent multibyte values, it
        should encode those values in network (big-endian) byte
        order.  This interpretation applies in particular to the
        non-generalized MPLS labels (32 bits) used in ATM, FR and
        generic MPLS networks."
   ::= { mplsTunnelCHopEntry 13 }

mplsTunnelCHopExpRvrsLabelType OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabelType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The C-Type of the following hop label.  This field is
         insignificant unless mplsTunnelCHopLabelStatuses has the
         reversePresent(0) bit set."
   ::= { mplsTunnelCHopEntry 14 }

mplsTunnelCHopExpRvrsLabel OBJECT-TYPE
   SYNTAX        MplsGeneralizedLabel
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The   explicit  in-segment  label  to  use  on  the
        reverse path.

        When this label is used in signaling protocol messages,
        it is copied byte for byte as is.  Therefore, if the label
        octet string is intended to represent multibyte values, it
        should encode those values in network (big-endian) byte
        order.  This interpretation applies in particular to the
        non-generalized MPLS labels (32 bits) used in ATM, FR and
        generic MPLS networks."
   ::= { mplsTunnelCHopEntry 15 }

-- End of mplsTunnelCHopTable


-- MPLS Tunnel Performance Table.

mplsTunnelPerfTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_TPRF
   SYNTAX        SEQUENCE OF MplsTunnelPerfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "This table provides per-tunnel MPLS performance
          information."
   ::= { mplsTeObjects 9 }

mplsTunnelPerfEntry OBJECT-TYPE
   SYNTAX        MplsTunnelPerfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table is created by the LSR for
          every tunnel.  Its is an extension to
          mplsTunnelEntry."
   AUGMENTS { mplsTunnelEntry }
   ::= { mplsTunnelPerfTable 1 }

MplsTunnelPerfEntry ::= SEQUENCE {
      mplsTunnelPerfPackets           Counter32,
      mplsTunnelPerfHCPackets         Counter64,
      mplsTunnelPerfErrors            Counter32,
      mplsTunnelPerfBytes             Counter32,
      mplsTunnelPerfHCBytes           Counter64
   }

mplsTunnelPerfPackets OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Number of packets forwarded by the tunnel."
   ::= { mplsTunnelPerfEntry 1 }

mplsTunnelPerfHCPackets OBJECT-TYPE
   SYNTAX        Counter64
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "High capacity counter for number of packets
          forwarded by the tunnel."
   ::= { mplsTunnelPerfEntry 2 }

mplsTunnelPerfErrors OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Number of errored packets."
   ::= { mplsTunnelPerfEntry 3 }

mplsTunnelPerfBytes OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "Number of bytes forwarded by the tunnel."
   ::= { mplsTunnelPerfEntry 4 }

mplsTunnelPerfHCBytes OBJECT-TYPE
   SYNTAX        Counter64
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "High capacity counter for number of bytes forwarded
          by the tunnel."
   ::= { mplsTunnelPerfEntry 5 }

-- End of mplsTunnelPerfTable


-- CR-LDP Tunnel Resource Table

mplsTunnelCRLDPResTable OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_TCRS
   SYNTAX        SEQUENCE OF MplsTunnelCRLDPResEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelCRLDPResTable allows a manager to
          specify which CR-LDP-specific resources are desired
          for an MPLS tunnel if that tunnel is signaled using
          CR-LDP. Note that these attributes are in addition
          to those specified in mplsTunnelResourceTable. This
          table also allows several tunnels to point to a
          single entry in this table, implying that these
          tunnels should share resources."
   ::= { mplsTeObjects 10 }

mplsTunnelCRLDPResEntry OBJECT-TYPE
   SYNTAX        MplsTunnelCRLDPResEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a set of resources
          for an MPLS tunnel established using CRLDP
          (mplsTunnelSignallingProto equal to crldp (3)). An
          entry can be created by a network administrator or
          by an SNMP agent as instructed by any MPLS
          signaling protocol."
   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelResourceIndex }
      ::= { mplsTunnelCRLDPResTable 1 }

MplsTunnelCRLDPResEntry ::= SEQUENCE {
     mplsTunnelCRLDPResMeanBurstSize   MplsBurstSize,
     mplsTunnelCRLDPResExBurstSize     MplsBurstSize,
     mplsTunnelCRLDPResFrequency       INTEGER,
     mplsTunnelCRLDPResWeight          Unsigned32,
     mplsTunnelCRLDPResFlags           Unsigned32,
     mplsTunnelCRLDPResRowStatus       RowStatus,
     mplsTunnelCRLDPResStorageType     StorageType
   }

mplsTunnelCRLDPResMeanBurstSize OBJECT-TYPE
   SYNTAX        MplsBurstSize
   UNITS         "bytes"
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The mean burst size in bytes."
   DEFVAL { 0 }
   ::= { mplsTunnelCRLDPResEntry 2 }

mplsTunnelCRLDPResExBurstSize OBJECT-TYPE
   SYNTAX        MplsBurstSize
   UNITS         "bytes"
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "The Excess burst size in bytes."
   REFERENCE
     "CR-LDP Specification, Section 4.3."
   ::= { mplsTunnelCRLDPResEntry 3 }

mplsTunnelCRLDPResFrequency OBJECT-TYPE
   SYNTAX  INTEGER {
         unspecified(1),
         frequent(2),
         veryFrequent(3)
      }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The granularity of the availability of committed
          rate."
   REFERENCE
        "CR-LDP Specification, Section 4.3."
   ::= { mplsTunnelCRLDPResEntry 4 }

mplsTunnelCRLDPResWeight OBJECT-TYPE
   SYNTAX        Unsigned32(0..255)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The relative weight for using excess bandwidth above
          its committed rate.  The value of 0 means that
          weight is not applicable for the CR-LSP."
   DEFVAL { 0 }
   ::= { mplsTunnelCRLDPResEntry 5 }

mplsTunnelCRLDPResFlags OBJECT-TYPE
   SYNTAX        Unsigned32 (0..63)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "The value of the 1 byte Flags conveyed as part of
          the traffic parameters during the establishment of
          the CRLSP. The bits in this object are to be
          interpreted as follows.

          +==+==+==+==+==+==+==+==+
          | Res |F6|F5|F4|F3|F2|F1|
          +==+==+==+==+==+==+==+==+

        Res - These bits are reserved. Zero on transmission.
          Ignored on receipt.
        F1 - Corresponds to the PDR.
        F2 - Corresponds to the PBS.
        F3 - Corresponds to the CDR.
        F4 - Corresponds to the CBS.
        F5 - Corresponds to the EBS.
        F6 - Corresponds to the Weight.

        Each flag if is a Negotiable Flag corresponding to a
          Traffic Parameter. The Negotiable Flag value zero
          denotes Not Negotiable and value one denotes
          Negotiable."
    DEFVAL { 0 }
    ::= { mplsTunnelCRLDPResEntry 6 }

mplsTunnelCRLDPResRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create, modify, and/or
          delete a row in this table."
   ::= { mplsTunnelCRLDPResEntry 7 }

mplsTunnelCRLDPResStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable indicates the storage type for this
          object."
   DEFVAL { 2 }
   ::= { mplsTunnelCRLDPResEntry 8 }

-- End of CR-LDP Tunnel Resource Table

-- Addition

-- MPLS DiffServ Table

mplsDiffServIndexNextTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_DSI
   SYNTAX        SEQUENCE OF MplsDiffServIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table contains the next available values of
        mplsDiffServIndex for all entities."
   ::= { mplsTeObjects 11 }

mplsDiffServIndexNextEntry  OBJECT-TYPE
   SYNTAX        MplsDiffServIndexNextEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table represents the next available
         mplsDiffServIndex for a specific TE-MIB entity.
         This MIB table is indexed by the PRVT-TE-MIB entity
         Index."

   INDEX  { prvtMplsTeMibEntityIndex }
      ::= { mplsDiffServIndexNextTable 1 }

MplsDiffServIndexNextEntry ::= SEQUENCE {
      mplsDiffServIndexNextIndex           Integer32
    }

mplsDiffServIndexNextIndex OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "This object contains the next appropriate value
         to be used for mplsDiffServIndex when creating
         entries in the mplsDiffServTable. If the number of
         unassigned entries is exhausted, this object
         will take on the value of 0.  To obtain the
         mplsDiffServIndex value for a new entry, the
         manager must first issue a management protocol
         retrieval operation to obtain the current value
         of this object. The agent should modify the
         value to reflect the next unassigned index after
         each retrieval operation. After a manager
         retrieves a value the agent will determine
         through its local policy when this index value
         will be made available for reuse."
::= { mplsDiffServIndexNextEntry 1 }

mplsDiffServTable OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_DS
   SYNTAX        SEQUENCE OF MplsDiffServEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsDiffServTable allows DiffServ parameters to be
          configured for DiffServ enabled LSPs signalled by the
          mplsTunnelTable.

        If a tunnel is an E-LSP, then fields in this table must be
          set to indicate 0 - 8 EXP->PHB maps, and the number
          of such maps, to be used by LSRs in the E-LSP to
          determine the PHB to apply to incoming packets.

        If a tunnel is an L-LSP, then fields in this table must be
          set to indicate the PHB Scheduling Class (PSC) to use
          for incoming packets."
   REFERENCE
        "Le Faucher, et. al, MPLS Support of Differentiated
          Services, Internet Draft <draft-ietf-mpls-diff-
          ext-09.txt>, April 2001."
   ::= { mplsTeObjects 12 }

mplsDiffServEntry OBJECT-TYPE
   SYNTAX        MplsDiffServEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents either a set of 0 -
          8 EXP->PHB maps, and the number of such maps, for an
          E-LSP or a PSC value for an L-LSP."
   REFERENCE
        "Le Faucher, et. al, MPLS Support of Differentiated
          Services, Internet Draft <draft-ietf-mpls-diff-
          ext-09.txt>, April 2001."
   INDEX {
      prvtMplsTeMibEntityIndex, mplsDiffServIndex
   }
   ::= { mplsDiffServTable 1 }

MplsDiffServEntry ::= SEQUENCE {
      mplsDiffServIndex            Integer32,
      mplsDiffServType             INTEGER,
      mplsDiffServLLSPPSC          Integer32,
      mplsDiffServELSPNumPHBs      Integer32,
      mplsDiffServELSPPHB0         Integer32,
      mplsDiffServELSPPHB1         Integer32,
      mplsDiffServELSPPHB2         Integer32,
      mplsDiffServELSPPHB3         Integer32,
      mplsDiffServELSPPHB4         Integer32,
      mplsDiffServELSPPHB5         Integer32,
      mplsDiffServELSPPHB6         Integer32,
      mplsDiffServELSPPHB7         Integer32,
      mplsDiffServRowStatus        RowStatus
   }

mplsDiffServIndex OBJECT-TYPE
   SYNTAX        Integer32 (1..2147483647)
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Uniquely identifies this row."
   ::= { mplsDiffServEntry 1 }

mplsDiffServType OBJECT-TYPE
   SYNTAX        INTEGER { elsp(0), llsp(1) }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This field must be set to indicate whether this row
          contains parameters for an E-LSP or an L-LSP."
   ::= { mplsDiffServEntry 2 }

mplsDiffServLLSPPSC OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value l-lsp
          (1), this field contains the16-bit encoding of the
          PHB Scheduling Class (PSC) to be used for packets on
          this LSP (RFC 3140)."
   ::= { mplsDiffServEntry 3 }

mplsDiffServELSPNumPHBs OBJECT-TYPE
   SYNTAX        Integer32 (0..8)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this value indicates the number of EXP->PHB
          maps defined in this row."
   ::= { mplsDiffServEntry 4 }

mplsDiffServELSPPHB0 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 0 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 5 }

mplsDiffServELSPPHB1 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 1 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 6 }

mplsDiffServELSPPHB2 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 2 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 7 }

mplsDiffServELSPPHB3 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 3 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 8 }

mplsDiffServELSPPHB4 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 4 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 9 }

mplsDiffServELSPPHB5 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 5 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 10 }

mplsDiffServELSPPHB6 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 6 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 11 }

mplsDiffServELSPPHB7 OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "Valid only when mplsDiffServType takes the value e-lsp
          (0), this field contains the 16-bit encoding of the
          PHB (RFC 3140) which is assigned to packets on this
          LSP with the value 7 in the EXP field of their MPLS
          shim header."
   ::= { mplsDiffServEntry 12 }

mplsDiffServRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create, modify, and/or
          delete a row in this table."
   ::= { mplsDiffServEntry 13 }

-- End of MPLS DiffServ Table

-- UNI Diversity table.

prvtMplsTunnelUNIDvLstIdxNxtTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_DIVNI
   SYNTAX        SEQUENCE OF PrvtMplsTunnelUNIDvLstIdxNxtEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table contains the next available values of
        prvtMplsTunnelUNIDivListIdx for all entities."
   ::= { mplsTeObjects 13 }

prvtMplsTunnelUNIDvLstIdxNxtEntry OBJECT-TYPE
   SYNTAX        PrvtMplsTunnelUNIDvLstIdxNxtEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table represents the next available
        prvtMplsTunnelUNIDivListIdx for a specific TE-MIB entity.
        This MIB table is indexed by the PRVT-TE-MIB entity Index."

   INDEX  { prvtMplsTeMibEntityIndex }
      ::= { prvtMplsTunnelUNIDvLstIdxNxtTable 1 }

PrvtMplsTunnelUNIDvLstIdxNxtEntry ::= SEQUENCE {
      prvtMplsTunnelUNIDivListIdxNext       Integer32
    }

prvtMplsTunnelUNIDivListIdxNext OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This is the next available List Index in the
         prvtMplsTunnelUNIDiversityTable."

   ::= { prvtMplsTunnelUNIDvLstIdxNxtEntry 1 }

prvtMplsTunnelUNIDiversityTable OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_DIV
   SYNTAX        SEQUENCE OF PrvtMplsTunnelUNIDiversityEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The prvtMplsTunnelUNIDiversityTable is used to indicate which
         existing tunnels a new UNI Connection is to be diverse from.
         This table is UNI specific.  Each
         prvtMplsTunnelUNIDiversityTable is indexed using
         prvtMplsTeMibEntityIndex, prvtMplsTunnelUNIDivListIdx,
         prvtMplsTunnelUNIDivTnnlIdx.

         To create a UNI tunnel to use Diversity, set up a row entry
         in the prvtMplsTunnelUNIDiversityTable for each existing
         tunnel that the new tunnel should be diverse from.

         Then when creating the new UNI tunnel, set
         prvtMplsTunnelUNIDiversityTableIndex in the mplsTunnelTable to
         the list_index corresponding to the Diversity Table to be
         used.

         A diversity list is read-only if it is referenced by an
         active row in the mplsTunnelTable that is admin_status up.
         Under these circumstances, no individual rows/diversity
         requirements making up the list can be added, modified or
         deleted.

         A list of diversity requirements can only be satisfied by
         signaling if all of the referenced rows in the
         mplsTunnelTable are oper_status up when signaling is
         initiated.  If the requirements cannot be satisfied, any
         tunnel attempting to use the list will remain oper_status
         down."

   ::= { mplsTeObjects 14 }

prvtMplsTunnelUNIDiversityEntry  OBJECT-TYPE
   SYNTAX        PrvtMplsTunnelUNIDiversityEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table corresponds to an entry in the mplsTunnelTable.
         A subsequent Tunnel that references this entry will be created Diverse
         from the tunnel row entry specified here."
   INDEX { prvtMplsTeMibEntityIndex, prvtMplsTunnelUNIDivListIdx,
           prvtMplsTunnelUNIDivIdx }
      ::= { prvtMplsTunnelUNIDiversityTable 1 }

PrvtMplsTunnelUNIDiversityEntry ::= SEQUENCE {
      prvtMplsTunnelUNIDivListIdx                  Integer32,
      prvtMplsTunnelUNIDivIdx                      Integer32,
      prvtMplsTunnelUNIDivRowPointer               RowPointer,
      prvtMplsTunnelOperStatus                     Integer32,
      prvtMplsTunnelUNIDivRowStatus                RowStatus,
      prvtMplsTunnelUNIDivRequirement              INTEGER,
      prvtMplsTunnelUNIDivAccess                   Integer32
   }

prvtMplsTunnelUNIDivListIdx OBJECT-TYPE
   SYNTAX         Integer32 (0..2147483647)
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
        "Primary index into this table identifying a
          particular list of Diversity requirements."
   ::= { prvtMplsTunnelUNIDiversityEntry 2 }

prvtMplsTunnelUNIDivIdx OBJECT-TYPE
   SYNTAX        Integer32 (0..2147483647)
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "Secondary index into this table identifying a
         Diversity requirement within the list."

   ::= { prvtMplsTunnelUNIDiversityEntry 3 }

prvtMplsTunnelUNIDivRowPointer OBJECT-TYPE
   SYNTAX        RowPointer
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This field represents a pointer to the entry in the
         mplsTunnelTable to which the Diversity requirement
         applies.  The array of longs specified here is configured
         as the OID of the corresponding tunnel."

   ::= { prvtMplsTunnelUNIDiversityEntry 4 }

prvtMplsTunnelOperStatus OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The Oper Status of the mplsTunnelTable row referred to by
         prvtMplsTunnelUNIDivPointer.  If this tunnel is removed
         from the mplsTunnelTable then this is set to AMB_OPER_STATUS_DOWN.

         This field is used to determine whether a diversity
         requirement can currently be satisfied by signaling."

   ::= { prvtMplsTunnelUNIDiversityEntry 5 }

prvtMplsTunnelUNIDivRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create or delete this row."
   ::= { prvtMplsTunnelUNIDiversityEntry 6 }

prvtMplsTunnelUNIDivRequirement OBJECT-TYPE
   SYNTAX        INTEGER {
         nodeDiverse(1),    -- node diverse
         linkDiverse(2),    -- link diverse
         srlg(3),           -- shared risk link group
         sharedPath(4)      -- shared path
      }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This field indicates the Diversity Requirement for the
         corresponding tunnel.  Once an row entry has been created
         and is oper status 'up' for this tunnel this value cannot
         be altered."

   ::= { prvtMplsTunnelUNIDiversityEntry 7 }

prvtMplsTunnelUNIDivAccess OBJECT-TYPE
   SYNTAX        Integer32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This field indicates the access (read-only or writable)
         that the user has over this row entry.

         The circumstances under which a row is read-only are
         described above."

   ::= { prvtMplsTunnelUNIDiversityEntry 8 }

-- End of UNI Diversity table.

prvtMplsTunnelTrapEnableTable OBJECT-TYPE
   SYNTAX        SEQUENCE OF PrvtMplsTunnelTrapEnableEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The prvtMplsTunnelTrapEnable Table allows a manager to
         enable or disable TRAPs."
   ::= { mplsTeObjects 15 }

prvtMplsTunnelTrapEnableEntry OBJECT-TYPE
   SYNTAX        PrvtMplsTunnelTrapEnableEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table is used to configure trap support for this
         instance of TE-MIB"

   INDEX  { prvtMplsTeMibEntityIndex }
      ::= { prvtMplsTunnelTrapEnableTable 1 }

PrvtMplsTunnelTrapEnableEntry ::= SEQUENCE {
      mplsTunnelTrapEnable             TruthValue
    }

mplsTunnelTrapEnable OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION
        "If this object is true, then it enables the
          generation of mplsTunnelUp and mplsTunnelDown
          traps, otherwise these traps are not emitted."
   DEFVAL { false }
   ::= { prvtMplsTunnelTrapEnableEntry 2 }

-- Scalar table

mplsTunnelHoldTimer OBJECT-TYPE
    SYNTAX        Unsigned32
  	MAX-ACCESS    read-write
   	STATUS        current
   	DESCRIPTION
       "Defines a period in seconds needed to wait before rebuilding backup 
       or primary tunnels if a frr condition occurs
       Currently no more than 10 seconds are allowed"
::= { mplsTeObjects 19 }

-- Addition

mplsTeMibEntityScalarTable  OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_SCALAR
   SYNTAX        SEQUENCE OF MplsTeMibEntityScalarEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTeMibEntityScalarTable contains all MPLS Tunnel
          scalars."
   ::= { mplsTeObjects 16 }

mplsTeMibEntityScalarEntry OBJECT-TYPE
   SYNTAX        MplsTeMibEntityScalarEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTeMibEntityScalarTable contains all MPLS Tunnel
          scalars."
   INDEX { prvtMplsTeMibEntityIndex }
      ::= { mplsTeMibEntityScalarTable 1 }

MplsTeMibEntityScalarEntry ::= SEQUENCE {
      mplsTunnelConfigured              Unsigned32,
      mplsTunnelActive                  Unsigned32,
      mplsTunnelTEDistProto             BITS,
      mplsTunnelMaxHops                 Unsigned32,
      mplsTunnelNotificationMaxRate     Unsigned32
   }

-- End Addition

mplsTunnelConfigured OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The number of tunnels configured on this device. A
          tunnel is considered configured if the
          mplsTunnelRowStatus is active(1)."
   ::= { mplsTeMibEntityScalarEntry 2 }

mplsTunnelActive OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The number of tunnels active on this device. A
          tunnel is considered active if the
          mplsTunnelOperStatus is up(1)."
   ::= { mplsTeMibEntityScalarEntry 3 }

mplsTunnelTEDistProto OBJECT-TYPE
   SYNTAX        BITS {
          other (0),
          ospf (1),
          isis (2)
      }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The traffic engineering distribution protocol(s)
          used by this LSR. Note that an LSR may support more
          than one distribution protocol simultaneously."
   ::= { mplsTeMibEntityScalarEntry 4 }

mplsTunnelMaxHops OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "The maximum number of hops that can be specified for
          a tunnel on this device."
   ::= { mplsTeMibEntityScalarEntry 5 }

mplsTunnelNotificationMaxRate OBJECT-TYPE
   SYNTAX       Unsigned32
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
        "This variable indicates the maximum number of
          notifications issued per second. If events occur
          more rapidly, the implementation may simply fail to
          emit these notifications during that period, or may
          queue them until an appropriate time. A value of 0
          means no throttling is applied and events may be
          notified at the rate at which they occur."
   DEFVAL       { 0 }
   ::= { mplsTeMibEntityScalarEntry 6 }

-- PRVT-Addition

-- SONET Tunnel Resource Table

mplsTunnelSonetResTable OBJECT-TYPE
-- FAMILY-SHORT-NAME MPLS_TSRS
   SYNTAX        SEQUENCE OF MplsTunnelSonetResEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "The mplsTunnelSonetResTable allows a manager to
          specify which Sonet-specific resources are desired
          for an MPLS tunnel. Note that these attributes are in addition
          to those specified in mplsTunnelResourceTable. This
          table also allows several tunnels to point to a
          single entry in this table, implying that these
          tunnels should share resources."
   ::= { mplsTeObjects 17 }

mplsTunnelSonetResEntry OBJECT-TYPE
   SYNTAX        MplsTunnelSonetResEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
        "An entry in this table represents a set of Sonet resources
          for an MPLS tunnel.  An entry can be created by a
          network administrator or by an SNMP agent as
          instructed by any MPLS signaling protocol."
   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelResourceIndex }
      ::= { mplsTunnelSonetResTable 1 }

MplsTunnelSonetResEntry ::= SEQUENCE {
      mplsTunnelSonetResRCC             Integer32,
      mplsTunnelSonetResNCC             Unsigned32,
      mplsTunnelSonetResNVC             Unsigned32,
      mplsTunnelSonetResMultiplier      Unsigned32,
      mplsTunnelSonetResTransparency    Unsigned32,
      mplsTunnelSonetResRowStatus       RowStatus,
      mplsTunnelSonetResSignalType      Integer32
   }

mplsTunnelSonetResRCC OBJECT-TYPE
   SYNTAX        Integer32 (0..255)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Requested Contiguous Concatenation.  Indicates the types
        of contiguous concatenation requested for this LSP.  This
        field is only valid if <lsp_encoding> is SDH or SONET, and the
        <resource_pointer> is 0.0."
   DEFVAL        { 0 }
   ::= { mplsTunnelSonetResEntry 2 }

mplsTunnelSonetResNCC OBJECT-TYPE
   SYNTAX        Unsigned32 (0..65535)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Requested Number of Contiguous Components.  Indicates the
        number of identical SDH/SONET SPEs/VCs that are
        requested to be concatenated, as indicated in the <rcc>
        field.  This field is only valid if <lsp_encoding> is SDH
        or SONET, and the <resource_pointer> is 0.0."
   DEFVAL        { 0 }
   ::= { mplsTunnelSonetResEntry 3 }

mplsTunnelSonetResNVC OBJECT-TYPE
   SYNTAX        Unsigned32 (0..65535)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This field indicates the number of signals that are
        requested to be virtually concatenated.  These signals
        are all of the same type.  This field is valid only if
        <lsp_encoding> is SDH or SONET, and the <resource_pointer> is 0.0."
   DEFVAL        { 0 }
   ::= { mplsTunnelSonetResEntry 4 }

mplsTunnelSonetResMultiplier OBJECT-TYPE
   SYNTAX        Unsigned32 (1..65535)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This field is a bit field indicating the number of
        identical signals that are requested for the LSP.  This
        field is valid only if <lsp_encoding> is SDH or SONET, and the
        <resource_pointer> is 0.0."
   DEFVAL        { 1 }
   ::= { mplsTunnelSonetResEntry 5 }

mplsTunnelSonetResTransparency OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This field is a bit field indicating the type of
        Transparency being requested.  Several flags can be
        combined to provide different types of transparency.  Not
        all combinations are necessarily valid.  This field is
        valid only if <lsp_encoding> is SDH or SONET, and the
        <resource_pointer> is 0.0."
   DEFVAL        { 0 }
   ::= { mplsTunnelSonetResEntry 6 }

mplsTunnelSonetResRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
        "This variable is used to create, modify, and/or
          delete a row in this table."
   ::= { mplsTunnelSonetResEntry 7 }

mplsTunnelSonetResSignalType OBJECT-TYPE
   SYNTAX        Integer32 (0..255)
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates the overhead termination type and is interpreted
        in relation to the LSP Encoding Type."
   DEFVAL        { 0 }
   ::= { mplsTunnelSonetResEntry 9 }

-- End of Sonet Tunnel Resource Table

-- GMPLS Tunnel Error Table.

mplsTunnelErrorTable  OBJECT-TYPE
  SYNTAX  SEQUENCE OF MplsTunnelErrorEntry
  MAX-ACCESS not-accessible
  STATUS  current
  DESCRIPTION
    "This table 'augments' the mplsTunnelTable.
     This table provides per-tunnel information about errors. Errors
     may be detected locally or reported through the signaling
     protocol. Error reporting is not exclusive to GMPLS and this
     table may be applied in MPLS systems."
  REFERENCE
    "Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
     Management Information Base (MIB), Srinivasan, C., Viswanathan,
     A., Nadeau, T., RFC 3812, June 2004."
  ::= { mplsTeObjects 18 }

mplsTunnelErrorEntry OBJECT-TYPE
  SYNTAX  MplsTunnelErrorEntry
  MAX-ACCESS not-accessible
  STATUS  current
  DESCRIPTION
    "An entry in this table is created by the LSR for every tunnel
     where error information is visible to the LSR.
     Note that systems which read the objects in this table one at a
     time may experience a discontinuity as the result of a new error
     occurring in between object reads. Systems that are vulnerable
     to this should read mplsTunnelErrorLastTime before and after
     reading the other objects."
  AUGMENTS { mplsTunnelEntry }
  ::= { mplsTunnelErrorTable 1 }

MplsTunnelErrorEntry ::= SEQUENCE {
  mplsTunnelErrorLastErrorType      INTEGER,
  mplsTunnelErrorLastTime           TimeStamp,
  mplsTunnelErrorReporterType       InetAddressType,
  mplsTunnelErrorReporter           InetAddress,
  mplsTunnelErrorCode               Unsigned32,
  mplsTunnelErrorSubcode            Unsigned32,
  mplsTunnelErrorTLVs               OCTET STRING,
  mplsTunnelErrorHelpString         DisplayString
}

mplsTunnelErrorLastErrorType OBJECT-TYPE
  SYNTAX  INTEGER {
    noError (0),
    unknown (1),
    protocol (2),
    pathComputation (3),
    localConfiguration (4),
    localResources (5),
    localOther (6)
  }
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "The nature of the last error. Provides interpretation context
     for mplsTunnelErrorProtocolCode and mplsTunnelErrorProtocolSubcode.

     A value of noError (0) shows that there is no error associated
     with this tunnel and means that the other objects in this table
     entry have no meaning.

     A value of unknown (1) shows that there is an error but that no
     additional information about the cause is known. The error may
     have been received in a signaled message or generated locally.

     A value of protocol (2) or pathComputation (3) indicates that
     the cause of an error and identifies an error that has been
     received through signaling or will itself be signaled.

     A value of localConfiguration (4), localResources (5) or
     localOther (6) identifies an error which has been detected
     by the local node, but which will not be reported through
     signaling."
  ::= { mplsTunnelErrorEntry 1 }

mplsTunnelErrorLastTime OBJECT-TYPE
  SYNTAX  TimeStamp
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "The time at which the last error occurred. This is presented as
     the value of SysUpTime when the error occurred or was reported
     to this node.
     If mplsTunnelErrorLastErrorType has the value noError (0), then
     this object is ignored."
  ::= { mplsTunnelErrorEntry 2 }

mplsTunnelErrorReporterType OBJECT-TYPE
   SYNTAX  InetAddressType
   MAX-ACCESS read-only
   STATUS  current
   DESCRIPTION
     "The address type of the error reported.
      This object is used to aid in interpretation of
      mplsTunnelErrorReporter."
  ::= { mplsTunnelErrorEntry 3 }

mplsTunnelErrorReporter OBJECT-TYPE
  SYNTAX  InetAddress
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "The address of the node reporting the last error, or the address
     of the resource (such as an interface) associated with the
     error.

     If mplsTunnelErrorLastErrorType has the value noError (0), then
     this object is ignored.

     If mplsTunnelErrorLastErrorType has the value unknown (1),
     localConfiguration (4), localResources (5), or localOther (6)
     this object MAY contain a zero value.

     This object should be interpreted in the context of the value of
     the object mplsTunnelErrorReporterType."
  REFERENCE
    "RFC3291, Textual Conventions for Internet Network Addresses,
     Section 4. Usage Hints."
  ::= { mplsTunnelErrorEntry 4 }

mplsTunnelErrorCode OBJECT-TYPE
  SYNTAX  Unsigned32
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "The primary error code associated with the last error.
     The interpretation of this error code depends on the value of
     mplsTunnelErrorLastErrorType. If the value of
     mplsTunnelErrorLastErrorType is noError (0) the value of this
     object should be 0 and should be ignored. If the value of
     mplsTunnelErrorLastErrorType is protocol (2) the error should
     be interpreted in the context of the signling protocol
     identified by the mplsTunnelSignallingProto object.

     Values in excess 32767 of are not used by signaling protocols
     and may safely be used as implementation-specific error codes."
  REFERENCE
    "1. Braden, R. (Ed.) et al., Resource ReserVation Protocol --
        Version 1 Functional Specification, RFC 2205, September 1997.
     2. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
        RFC 3209, December 2001.
     3. Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
        (Editor), RFC 3473, January 2003."
  ::= { mplsTunnelErrorEntry 5 }

mplsTunnelErrorSubcode OBJECT-TYPE
  SYNTAX  Unsigned32
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "The secondary error code associated with the last error and the
     protocol used to signal this tunnel. This value is interpreted
     in the context of the value of mplsTunnelErrorCode.
     If the value of mplsTunnelErrorLastErrorType is noError (0) the
     value of this object should be 0 and should be ignored."
  REFERENCE
    "1. Braden, R. (Ed.) et al., Resource ReserVation Protocol --
        Version 1 Functional Specification, RFC 2205, September 1997.
     2. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
        RFC 3209, December 2001.
     3. Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
        (Editor), RFC 3473, January 2003."
  ::= { mplsTunnelErrorEntry 6 }

mplsTunnelErrorTLVs OBJECT-TYPE
  SYNTAX  OCTET STRING (SIZE (0..255))
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "The sequence of interface identifier TLVs reported with the
     error by the protocol code. The interpretation of the TLVs and
     the encoding within the protocol are described in the
     references. A value of zero in the first octet indicates that no
     TLVs are present."
   REFERENCE
    "Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
     (Editor), RFC 3473, January 2003."
  ::= { mplsTunnelErrorEntry 7 }

mplsTunnelErrorHelpString OBJECT-TYPE
  SYNTAX  DisplayString
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
    "A textual string containing information about the last error,
     recovery actions and support advice. If there is no help string
     this object contains a zero length string.
     If the value of mplsTunnelErrorLastErrorType is noError (0)
     this object should contain a zero length string, but may contain
     a help string indicating that there is no error."
  ::= { mplsTunnelErrorEntry 8 }

-- End Addition

-- Notifications.

mplsTunnelUp NOTIFICATION-TYPE
   OBJECTS     {
      mplsTunnelAdminStatus,
      mplsTunnelOperStatus
   }
   STATUS      current
   DESCRIPTION
        "This notification is generated when a
          mplsTunnelOperStatus object for one of the
          configured tunnels is about to leave the down state
          and transition into some other state (but not into
          the notPresent state).  This other state is
          indicated by the included value of
          mplsTunnelOperStatus.

          This structure is the same as the generic
          AMB_MPLS_TUNNEL_TRAP_COMMON."
   ::= { mplsTeNotifyPrefix 1 }

mplsTunnelDown NOTIFICATION-TYPE
   OBJECTS     {
      mplsTunnelAdminStatus,
      mplsTunnelOperStatus
   }
   STATUS      current
   DESCRIPTION
        "This notification is generated when a
          mplsTunnelOperStatus object for one of the
          configured tunnels is about to enter the down state
          from some other state (but not from the notPresent
          state).  This other state is indicated by the
          included value of mplsTunnelOperStatus.

          This structure is the same as the generic
          AMB_MPLS_TUNNEL_TRAP_COMMON."
   ::= { mplsTeNotifyPrefix 2 }

mplsTunnelRerouted NOTIFICATION-TYPE
   OBJECTS     {
      mplsTunnelAdminStatus,
      mplsTunnelOperStatus,
      mplsTunnelARHopTableIndex
   }
   STATUS      current
   DESCRIPTION
        "This notification is generated when a tunnel is
          rerouted. If the actual path is used, then this
          object MAY contain the new path for this tunnel
          some time after this trap is issued by the agent.

          This structure is the same as the generic
          AMB_MPLS_TUNNEL_TRAP_COMMON."
    ::= { mplsTeNotifyPrefix 3 }

mplsTunnelReoptimized NOTIFICATION-TYPE
   OBJECTS     {
      mplsTunnelAdminStatus,
      mplsTunnelOperStatus,
      mplsTunnelARHopTableIndex
   }
   STATUS      current
   DESCRIPTION
        "This notification is generated when a tunnel is
          reoptimized. If the mplsTunnelARHopTable is used,
          then this tunnel instance's entry in the
          mplsTunnelARHopTable MAY contain the new path for
          this tunnel some time after this trap is issued by
          the agent.

          This structure is the same as the generic
          AMB_MPLS_TUNNEL_TRAP_COMMON."
    ::= { mplsTeNotifyPrefix 4 }

-- End of notifications.


-- Module compliance.

mplsTeGroups
   OBJECT IDENTIFIER ::= { mplsTeConformance 1 }

mplsTeCompliances
   OBJECT IDENTIFIER ::= { mplsTeConformance 2 }


mplsTeModuleFullCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
        "Compliance statement for agents that provide full
          support the MPLS-TE-STD-MIB module."

   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
      MANDATORY-GROUPS {
         ifGeneralInformationGroup,
         ifCounterDiscontinuityGroup
      }

   MODULE -- this module

      -- The mandatory group has to be implemented by all
      -- LSRs that originate/terminate ESLSPs/tunnels.
      -- In addition, depending on the type of tunnels
      -- supported, other groups become mandatory as
      -- explained below.

      MANDATORY-GROUPS    {
         mplsTunnelGroup,
         mplsTunnelScalarGroup
      }

      GROUP mplsTunnelManualGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           manual configuration of tunnels."

      GROUP mplsTunnelSignaledGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           signaled tunnel set up."

      GROUP mplsTunnelIsNotIntfcGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           tunnels that are not interfaces."

      GROUP mplsTunnelIsIntfcGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           tunnels that are interfaces."

      GROUP mplsTunnelCRLDPResOptionalGroup
      DESCRIPTION
          "Objects in this group are required by
           implementations supporting the CR-LDP protocol for
           signalling of TE tunnels."

      GROUP       mplsTunnelSonetGroup
      DESCRIPTION
          "Set of objects needed to implement Sonet."

      GROUP       mplsTunnelUniGroup
      DESCRIPTION
          "Set of objects needed to implement UNI."

      GROUP       mplsTunnelBackupGroup
      DESCRIPTION
         "Set of objects needed for backup tunnels."

      GROUP       mplsTunnelARHopGroup
      DESCRIPTION
         "Set of objects relating to ARHop."

      GROUP       mplsTunnelCHopGroup
      DESCRIPTION
         "Set of objects relating to CHop."

      GROUP       mplsDiffServGroup
      DESCRIPTION
         "Set of objects relating to DiffServ."

      GROUP mplsTeNotificationGroup
      DESCRIPTION "This group is mandatory for those implementations
                   which can implement the notifications
                   contained in this group."

      OBJECT       mplsTunnelRowStatus
      SYNTAX       RowStatus { active(1), notInService(2) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2),
                               createAndGo(4), destroy(6)
                             }
      DESCRIPTION "Support for createAndWait and notReady is not
                   required."

      OBJECT      mplsTunnelHopRowStatus
      SYNTAX       RowStatus { active(1), notInService(2) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2),
                               createAndGo(4), destroy(6)
                             }
      DESCRIPTION "Support for createAndWait and notReady is not
                   required."

      OBJECT      mplsTunnelCRLDPResRowStatus
      SYNTAX       RowStatus { active(1), notInService(2) }
      WRITE-SYNTAX RowStatus { active(1), notInService(2),
                               createAndGo(4), destroy(6)
                             }
      DESCRIPTION "Support for createAndWait and notReady is
                   not required."

   ::= { mplsTeCompliances 1 }

-- Compliance requirement for read-only implementations.

mplsTeModuleReadOnlyCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
        "Compliance requirement for implementations that only
          provide read-only support for MPLS-TE-STD-MIB.
          Such devices can then be monitored but cannot be
          configured using this MIB modules."

   MODULE -- this module

      -- mplsTunnelTable

      MANDATORY-GROUPS    {
         mplsTunnelGroup,
         mplsTunnelScalarGroup
      }

      GROUP mplsTunnelManualGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           manual configuration of tunnels."

      GROUP mplsTunnelSignaledGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           signaled tunnel set up."

      GROUP mplsTunnelIsNotIntfcGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           tunnels that are not interfaces."

      GROUP mplsTunnelIsIntfcGroup
      DESCRIPTION
          "This group is mandatory for devices which support
           tunnels that are interfaces."

      GROUP mplsTunnelCRLDPResOptionalGroup
      DESCRIPTION
          "Objects in this group are required by
           implementations supporting the CR-LDP protocol for
           signalling of TE tunnels."

      GROUP mplsTeNotificationGroup
      DESCRIPTION "This group is mandatory for those implementations
                   which can implement the notifications
                   contained in this group."

      -- mplsTunnelTable

      OBJECT      mplsTunnelName
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelDescr
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelIsIf
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelIfIndex
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelXCPointer
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelSignallingProto
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelSetupPrio
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHoldingPrio
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelSessionAttributes
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelLocalProtectInUse
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourcePointer
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelInstancePriority
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopTableIndex
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelIncludeAnyAffinity
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelIncludeAllAffinity
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelExcludeAnyAffinity
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelPathInUse
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelRole
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelAdminStatus
      SYNTAX      INTEGER { up (1), down (2) }
      MIN-ACCESS  read-only
      DESCRIPTION
          "Only up and down states must be supported. Write
           access is not required."

      OBJECT      mplsTunnelRowStatus
      SYNTAX      RowStatus { active(1) }
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      -- mplsTunnelHopTable

      OBJECT      mplsTunnelHopAddrType
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopIpAddr
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopIpPrefixLen
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopAddrUnnum
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopAsNumber
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopLspId
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopType
      SYNTAX      INTEGER { strict(1) }
      MIN-ACCESS  read-only
      DESCRIPTION
          "loose(2) need not be supported. Write access is
           not required."

      OBJECT      mplsTunnelHopInclude
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopPathOptionName
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopEntryPathComp
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopRowStatus
      SYNTAX      RowStatus { active(1) }
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelHopStorageType
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      -- mplsTunnelResourceTable

      OBJECT      mplsTunnelResourceMaxRate
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceMeanRate
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceMaxBurstSize
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceMeanBurstSize
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceExBurstSize
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceFrequency
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceWeight
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceRowStatus
      SYNTAX      RowStatus { active(1) }
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelResourceStorageType
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      -- mplsTunnelCRLDPResTable

      OBJECT      mplsTunnelCRLDPResMeanBurstSize
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelCRLDPResExBurstSize
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelCRLDPResFrequency
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelCRLDPResWeight
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelCRLDPResFlags
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelCRLDPResRowStatus
      SYNTAX      RowStatus { active(1) }
      MIN-ACCESS  read-only
      DESCRIPTION
          "Write access is not required."

      OBJECT      mplsTunnelCRLDPResStorageType
      MIN-ACCESS   read-only
      DESCRIPTION
          "Write access is not required."

   ::= { mplsTeCompliances 2 }


-- Units of conformance.

mplsTunnelGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelIndexNextIndex,
      mplsTunnelName,
      mplsTunnelDescr,
      mplsTunnelOwner,
      mplsTunnelXCPointer,
      mplsTunnelIfIndex,
      mplsTunnelHopTableIndex,
      mplsTunnelARHopTableIndex,
      mplsTunnelCHopTableIndex,
      mplsTunnelAdminStatus,
      mplsTunnelOperStatus,
      mplsTunnelRowStatus,
      mplsTunnelStorageType,
      mplsTunnelDirection,
      mplsTunnelLSPEncoding,
      mplsTunnelLinkProtection,
      mplsTunnelGPid,
      mplsTunnelUseEgressLabel,
      mplsTunnelEgressLabel,
      mplsTunnelEgressLabelType,
      mplsTunnelOmitEROIfOneHop,
      mplsTunnelPrivateData,
      mplsTunnelSrcTNAAddressType,
      mplsTunnelSrcTNAAddress,
      mplsTunnelDestTNAAddressType,
      mplsTunnelDestTNAAddress,
      mplsTunnelSecondary,
      mplsTunnelUnnumIf,
      mplsTunnelAttributes,
      mplsTunnelEndToEndRerouting,
      mplsTunnelIsUni,
      mplsTunnelUniServiceLevel,
      mplsTunnelUniEgressLabel,
      mplsTunnelUniEgressLabelType,
      mplsTunnelUniEgressLabelPort,
      mplsTunnelUniRvsEgressLabel,
      mplsTunnelUniRvsEgressLabelType,
      mplsTunnelUniRvsEgressLabelPort,
      mplsTunnelSwitchingType,
      mplsTunnelDeletionMode,
      mplsTunnelUniDiversityListIndex,
      mplsTunnelDiffServIndex,
      mplsTunnelReversePrivateData,
      mplsTunnelAdminStatusFlags,
      mplsTunnelFastRerouteMode,
      mplsTunnelBackupSetupPrio,
      mplsTunnelBackupHoldingPriority,
      mplsTunnelBackupIncAny,
      mplsTunnelBackupIncAll,
      mplsTunnelBackupExcAny,
      mplsTunnelBackupBandwidth,
      mplsTunnelBackupMaxHops,
      mplsTunnelDownNotRecipType,
      mplsTunnelDownNotRecip,
      mplsTunnelPathComp,
      mplsTunnelUpNotRecipType,
      mplsTunnelUpNotRecip,
      mplsTunnelExtraParamsPtr,
      mplsTunnelIsSpc,
      mplsTunnelUniIngressLabel,
      mplsTunnelUniIngressLabelType,
      mplsTunnelUniIngressLabelPort,
      mplsTunnelUniRvsIngrLabel,
      mplsTunnelUniRvsIngrLabelType,
      mplsTunnelUniRvsIngrLabelPort,
      mplsTunnelDiffServClassType,
      mplsTunnelExtendedProtection,
      mplsTunnelProtecting,
      mplsTunnelNotification,
      mplsTunnelLspProtection,
      mplsTunnelAssociatedLspId,
      mplsTunnelCallIdType,
      mplsTunnelCallId,
      mplsTunnelIsIpv6,
      mplsTunnelConfigured,
      mplsTunnelActive,
      mplsTunnelPrimaryInstance,
      mplsTunnelPrimaryUpTime,
      mplsTunnelPathChanges,
      mplsTunnelLastPathChange,
      mplsTunnelCreationTime,
      mplsTunnelStateTransitions,
      mplsTunnelIncludeAnyAffinity,
      mplsTunnelIncludeAllAffinity,
      mplsTunnelExcludeAnyAffinity,
--      mplsTunnelPerfPackets,
--      mplsTunnelPerfHCPackets,
--      mplsTunnelPerfErrors,
--      mplsTunnelPerfBytes,
--      mplsTunnelPerfHCBytes,
      mplsTunnelResourcePointer,
      mplsTunnelInstancePriority,
      mplsTunnelPathInUse,
      mplsTunnelRole,
      mplsTunnelTotalUpTime,
      mplsTunnelInstanceUpTime,
      mplsTunnelResourceMaxRate,
      mplsTunnelResourceMeanRate,
      mplsTunnelResourceMaxBurstSize,
      mplsTunnelResourceMeanBurstSize,
      mplsTunnelResourceExBurstSize,
      mplsTunnelResourceFrequency,
      mplsTunnelResourceWeight,
      mplsTunnelResourceRowStatus,
      mplsTunnelResourceStorageType,
      mplsTunnelResourceIndexNextIndex,
      mplsTunnelSonetResRCC,
      mplsTunnelSonetResNCC,
      mplsTunnelSonetResNVC,
      mplsTunnelSonetResMultiplier,
      mplsTunnelSonetResTransparency,
      mplsTunnelSonetResRowStatus,
      mplsTunnelARHopAddrType,
      mplsTunnelARHopIpAddr,
      mplsTunnelARHopAddrUnnum,
      mplsTunnelARHopLspId,
      mplsTunnelCHopAddrType,
      mplsTunnelCHopIpAddr,
      mplsTunnelCHopIpPrefixLen,
      mplsTunnelCHopAsNumber,
      mplsTunnelCHopAddrUnnum,
      mplsTunnelCHopLspId,
      mplsTunnelCHopType,
      mplsTunnelTrapEnable,
      mplsTunnelErrorLastErrorType,
      mplsTunnelErrorLastTime,
      mplsTunnelErrorReporterType,
      mplsTunnelErrorReporter,
      mplsTunnelErrorCode,
      mplsTunnelErrorSubcode,
      mplsTunnelErrorTLVs,
      mplsTunnelErrorHelpString
   }
   STATUS  current
   DESCRIPTION
        "Necessary, but not sufficient, set of objects to
          implement tunnels.  In addition, depending on the
          type of the tunnels supported (for example,
          manually configured or signaled, persistent or non-
          persistent, etc.), the following other groups
          defined below are mandatory: mplsTunnelManualGroup
          and/or mplsTunnelSignaledGroup,
          mplsTunnelIsNotIntfcGroup and/or
          mplsTunnelIsIntfcGroup."
   ::= { mplsTeGroups 1 }

mplsTunnelManualGroup  OBJECT-GROUP
   OBJECTS { mplsTunnelSignallingProto }
   STATUS  current
   DESCRIPTION
        "Object(s) needed to implement manually configured
          tunnels."
   ::= { mplsTeGroups 2 }

mplsTunnelSignaledGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelSetupPrio,
      mplsTunnelHoldingPrio,
      mplsTunnelSignallingProto,
      mplsTunnelLocalProtectInUse,
      mplsTunnelSessionAttributes,
      mplsTunnelHopAddrType,
      mplsTunnelHopIpAddr,
      mplsTunnelHopIpPrefixLen,
      mplsTunnelHopAddrUnnum,
      mplsTunnelHopAsNumber,
      mplsTunnelHopLspId,
      mplsTunnelHopType,
      mplsTunnelHopInclude,
      mplsTunnelHopPathOptionName,
      mplsTunnelHopEntryPathComp,
      mplsTunnelHopRowStatus,
      mplsTunnelHopStorageType,
      mplsTunnelHopLabelStatuses,
      mplsTunnelHopExpLabelType,
      mplsTunnelHopExpLabel,
      mplsTunnelHopExpRvrsLabelType,
      mplsTunnelHopExpRvrsLabel,
      mplsTunnelHopIndexNextIndex
   }
   STATUS  current
   DESCRIPTION
        "Objects needed to implement signaled tunnels."
   ::= { mplsTeGroups 3 }

mplsTunnelScalarGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelConfigured,
      mplsTunnelActive,
      mplsTunnelTEDistProto,
      mplsTunnelMaxHops,
      mplsTunnelNotificationMaxRate
   }
   STATUS  current
   DESCRIPTION
        "Scalar object needed to implement MPLS tunnels."
   ::= { mplsTeGroups 4 }

mplsTunnelIsIntfcGroup OBJECT-GROUP
   OBJECTS { mplsTunnelIsIf }
   STATUS  current
   DESCRIPTION
        "Objects needed to implement tunnels that are
          interfaces."
   ::= { mplsTeGroups 5 }

mplsTunnelIsNotIntfcGroup OBJECT-GROUP
   OBJECTS { mplsTunnelIsIf }
   STATUS  current
   DESCRIPTION
        "Objects needed to implement tunnels that are not
          interfaces."
   ::= { mplsTeGroups 6 }

mplsTunnelCRLDPResOptionalGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelCRLDPResMeanBurstSize,
      mplsTunnelCRLDPResExBurstSize,
      mplsTunnelCRLDPResFrequency,
      mplsTunnelCRLDPResWeight,
      mplsTunnelCRLDPResFlags,
      mplsTunnelCRLDPResRowStatus,
      mplsTunnelCRLDPResStorageType
   }
   STATUS  current
   DESCRIPTION
        "Set of objects implemented for resources applicable
          for tunnels signaled using CR-LDP."
   ::= { mplsTeGroups 7 }


mplsTunnelSonetGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelSonetResSignalType,
      mplsTunnelSonetResRCC,
      mplsTunnelSonetResNCC,
      mplsTunnelSonetResNVC,
      mplsTunnelSonetResMultiplier,
      mplsTunnelSonetResTransparency
   }
   STATUS  current
   DESCRIPTION
        "Set of objects needed to implement Sonet.
          None of these objects are mandatory."
   ::= { mplsTeGroups 8 }

mplsTunnelUniGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelIsUni,
      mplsTunnelUniServiceLevel,
      mplsTunnelUniEgressLabel,
      mplsTunnelUniEgressLabelType,
      mplsTunnelUniEgressLabelPort,
      mplsTunnelUniRvsEgressLabel,
      mplsTunnelUniRvsEgressLabelType,
      mplsTunnelUniRvsEgressLabelPort,
      mplsTunnelUniDiversityListIndex,
      mplsTunnelUniIngressLabelType,
      mplsTunnelUniIngressLabelPort,
      mplsTunnelUniIngressLabel,
      mplsTunnelUniRvsIngrLabel,
      mplsTunnelUniRvsIngrLabelType,
      mplsTunnelUniRvsIngrLabelPort
   }
   STATUS  current
   DESCRIPTION
        "Set of objects needed to implement UNI.
          None of these objects are mandatory."
   ::= { mplsTeGroups 9 }

-- mplsTunnelUniDivGroup OBJECT-GROUP
--   OBJECTS {
--      prvtMplsTunnelUNIDivListIdxNext,
--      prvtMplsTunnelUNIDivRowPointer,
--      prvtMplsTunnelOperStatus,
--      prvtMplsTunnelUNIDivRowStatus,
--      prvtMplsTunnelUNIDivRequirement,
--      prvtMplsTunnelUNIDivAccess
--   }
--   STATUS  current
--   DESCRIPTION
--        "Set of objects needed to implement UNI Diversity.
--          None of these objects are mandatory."
--   ::= { mplsTeGroups 10 }

mplsTunnelBackupGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelBackupSetupPrio,
      mplsTunnelBackupHoldingPriority,
      mplsTunnelBackupIncAny,
      mplsTunnelBackupIncAll,
      mplsTunnelBackupExcAny,
      mplsTunnelBackupBandwidth,
      mplsTunnelBackupMaxHops
   }
   STATUS  current
   DESCRIPTION
        "Set of objects needed for backup tunnels.
          None of these objects are mandatory."
   ::= { mplsTeGroups 11 }

mplsTunnelARHopGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelARHopAddrType,
      mplsTunnelARHopIpAddr,
      mplsTunnelARHopAddrUnnum,
      mplsTunnelARHopLspId,
      mplsTunnelARHopLabelStatuses,
      mplsTunnelARHopExpLabelType,
      mplsTunnelARHopExpLabel,
      mplsTunnelARHopExpRvrsLabel,
      mplsTunnelARHopExpRvrsLabelType,
      mplsTunnelARHopProtection
    }
    STATUS  current
    DESCRIPTION
         "Set of objects relating to ARHop.
           None of these objects are mandatory."
    ::= { mplsTeGroups 12 }

mplsTunnelCHopGroup OBJECT-GROUP
   OBJECTS {
      mplsTunnelCHopAddrType,
      mplsTunnelCHopIpAddr,
      mplsTunnelCHopIpPrefixLen,
      mplsTunnelCHopAsNumber,
      mplsTunnelCHopAddrUnnum,
      mplsTunnelCHopLspId,
      mplsTunnelCHopType,
      mplsTunnelCHopLabelStatuses,
      mplsTunnelCHopExpLabelType,
      mplsTunnelCHopExpLabel,
      mplsTunnelCHopExpRvrsLabelType,
      mplsTunnelCHopExpRvrsLabel
    }
    STATUS  current
    DESCRIPTION
         "Set of objects relating to CHop.
           None of these objects are mandatory."
    ::= { mplsTeGroups 13 }

mplsDiffServGroup OBJECT-GROUP
   OBJECTS {
      mplsDiffServIndexNextIndex,
      mplsDiffServType,
      mplsDiffServLLSPPSC,
      mplsDiffServELSPNumPHBs,
      mplsDiffServELSPPHB0,
      mplsDiffServELSPPHB1,
      mplsDiffServELSPPHB2,
      mplsDiffServELSPPHB3,
      mplsDiffServELSPPHB4,
      mplsDiffServELSPPHB5,
      mplsDiffServELSPPHB6,
      mplsDiffServELSPPHB7,
      mplsDiffServRowStatus
    }
    STATUS  current
    DESCRIPTION
         "Set of objects relating to DiffServ.
            None of these objects are mandatory."
    ::= { mplsTeGroups 14 }

mplsTeNotificationGroup NOTIFICATION-GROUP
   NOTIFICATIONS {
      mplsTunnelUp,
      mplsTunnelDown,
      mplsTunnelRerouted,
      mplsTunnelReoptimized
   }
   STATUS  current
   DESCRIPTION
        "Set of notifications implemented in this module.
          None is mandatory."
   ::= { mplsTeGroups 15 }

-- End of MPLS-TE-MIB
END