path: root/MIBS/sentry/Sentry3-MIB

--
--  Copyright(C) 2003-2016 Server Technology, Inc.
--

    Sentry3-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, NOTIFICATION-TYPE,
        OBJECT-TYPE, enterprises                            FROM SNMPv2-SMI
        DisplayString                                       FROM SNMPv2-TC;


    sentry3 MODULE-IDENTITY
        LAST-UPDATED "201601251630Z" -- 25 January 2016
        ORGANIZATION "Server Technology, Inc."
        CONTACT-INFO
            "Server Technology, Inc.
             1040 Sandhill Road
             Reno, NV 89521
             Tel: (775) 284-2000
             Fax: (775) 284-2065
             Email: mibmaster@servertech.com"
        DESCRIPTION
            "This is the MIB module for the third generation of the
             Sentry product family.  This includes the Sentry Remote
             Power Manager (RPM), Sentry Power Distribution Unit (PDU),
             Sentry Environmental Monitor (EM), Sentry Smart and
             Switched Cabinet Distribution Unit (CDU), and Sentry
             Switched -48 VDC."
        REVISION "201601251630Z" -- 25 January 2016
        DESCRIPTION
            "Adjusted the upper limit of infeedLoadValue to 60000.
             Adjusted the upper limit of infeedLoadHighThresh to 600.
             Adjusted the upper limit of infeedCapacity to 600."
        REVISION "201406251200Z" -- 25 June 2014
        DESCRIPTION
            "Adjusted the upper limit of tempHumidSensorTempRecDelta
             to 54."
        REVISION "201401161800Z" -- 16 January 2014
        DESCRIPTION
            "Added an eventInformationGroup with two new objects:
             eventStatusText and eventStatusCondition.  Added these
             objects to all traps and updated the trap annotations
             to use the eventStatusText string value instead of the
             integer value of the status object in the trap."
        REVISION "201311250900Z" -- 25 November 2013
        DESCRIPTION
            "Added a new object: tempHumidSensorHumidRecDelta."
        REVISION "201309161000Z" -- 16 September 2013
        DESCRIPTION
            "Adjusted the upper limit of infeedLoadValue to 30000.
             Adjusted the upper limit of infeedLoadHighThresh to 300.
             Adjusted the upper limit of infeedCapacity to 300.
             Adjusted the upper limit of branchLoadValue to 4000."
        REVISION "201302140930Z" -- 14 February 2013
        DESCRIPTION
            "Added a branch table with new objects for branch status
             and current measurements.  Added 'branchOnSense' and
             'branchLoadSense' bits to infeedCapabilities.  Added
             'reading', 'offFuse', and 'onFuse' bits to infeedStatus.
             Added branchStatusEvent and branchLoadEvent notifications.
             Added 'outOfBalance' to the list of error conditions
             enumerated by the towerStatus object."
        REVISION "201211071400Z" -- 7 November 2012
        DESCRIPTION
            "Adjusted the upper limit of systemVersion to 80.  Adjusted
             the upper limit of infeedOutletCount and outletIndex to 64."
        REVISION "201204181400Z" -- 18 April 2012
        DESCRIPTION
            "Adjusted the upper limit of outletIndex to 32."
        REVISION "201201041100Z" -- 4 January 2012
        DESCRIPTION
            "Added 'nvmFail' to the list of error conditions enumerated
             by the towerStatus object."
        REVISION "201107111640Z" -- 11 July 2011
        DESCRIPTION
            "Added 'outletControlInhibit' to the list of key-activated
             features enumerated by the systemFeatures object.  Changed
             the upper limit of tempHumidSensorTempRecDelta to 18 to
             accommodate the maximum Fahrenheit value."
        REVISION "201106151300Z" -- 15 June 2011
        DESCRIPTION
            "Added a new object: tempHumidSensorTempRecDelta."
        REVISION "201105051100Z" -- 5 May 2011
        DESCRIPTION
            "Added several new objects: systemOutletSeqInterval,
             systemOutletRebootDelay, systemConfigModifiedCount,
             outletWakeupState, and outletPostOnDelay.  Removed the
             'snmpPOPS' feature-key activation requirement from
             descriptions of POPS objects."
        REVISION "201007071215Z" -- 7 July 2010
        DESCRIPTION
            "Added support for Per-Inlet Power Sensing (PIPS) hardware.
             Added several new objects: towerVACapacity,
             towerVACapacityUsed, towerActivePower, towerApparentPower,
             towerPowerFactor, towerEnergy, towerLineFrequency,
             infeedReactance, infeedPhaseCurrent, infeedPhaseVoltage,
             infeedCapacityUsed, infeedLineID, infeedLineToLineID,
             infeedPhaseID, infeedVACapacity, and infeedVACapacityUsed.
             Changed the UNITS of infeedEnergy.  Adjusted the limits of
             INTEGER data types for various objects.  Updated the
             descriptions of various infeedTable objects to distinguish
             between line and phase measurements with three-phase PIPS
             hardware."
        REVISION "200903101600Z" -- 10 March 2009
        DESCRIPTION
            "Added support for Per-Outlet Power Sensing (POPS) hardware.
             Added several new objects: systemFeatures, systemFeatureKey,
             infeedApparentPower, infeedPowerFactor, infeedCrestFactor,
             infeedEnergy, outletCapacity, outletVoltage, outletPower,
             outletApparentPower, outletPowerFactor, outletCrestFactor,
             and outletEnergy.  Added 'voltageSense' and 'powerSense'
             bit definitions to the input feed and outlet capabilities
             objects.  Increased the size of systemVersion to 50."
        REVISION "200805071520Z" -- 7 May 2008
        DESCRIPTION
            "Added systemAreaUnit and systemPowerFactor objects.  Renamed
             the systemWattsPerUnitArea object to systemWattsPerAreaUnit.
             Changed systemArea from read-only to read-write."
        REVISION "200707091445Z" -- 9 July 2007
        DESCRIPTION
            "Added support for products with fan rotation sensing and
             internal temperature sensing.  Added 'fanSense' and
             'tempSense' bit definitions to the tower capabilities
             object.  Added 'fanFail' and 'overTemp' states to the
             towerStatus object.  Modified the description of the
             towerStatusEvent trap to reflect these additions."
        REVISION "200701091410Z" -- 9 January 2007
        DESCRIPTION
            "Added several new objects: systemArea, systemTotalPower,
             systemWattsPerUnitArea, towerProductSN, towerModelNumber,
             towerCapabilities, infeedCapacity, infeedVoltage, and
             infeedPower.  Added six states to the outletControlState
             object."
        REVISION "200607201200Z" -- 20 July 2006
        DESCRIPTION
            "Changed the upper limit of systemTowerCount from 2 to 4."
        REVISION "200606120930Z" -- 12 June 2006
        DESCRIPTION
            "Added a tempHumidSensorTempScale object to select either
             Celsius or Fahrenheit as the scale for temperature values.
             To accommodate the maximum Fahrenheit value, the upper limit
             of tempHumidSensorTempValue was changed to 2540, and the
             upper limit of tempHumidSensorTempHighThresh was changed to
             254.  Removed 'Celsius' from the UNITS clause and description
             of temperature objects.  Added the tempHumidSensorTempScale
             object to the tempHumidSensorTempEvent trap.  Changed the
             upper limit of towerIndex from 2 to 4, to accommodate new
             products with additional link capabilities."
        REVISION "200507271105Z" -- 27 July 2005
        DESCRIPTION
            "Changed the upper limit of tempHumidSensorTempLowThresh to
             123.  Changed the upper limit of tempHumidSensorTempValue
             to 1235."
        REVISION "200502181145Z" -- 18 February 2005
        DESCRIPTION
            "Added CDU products to the MIB description.  Corrected syntax
             of outletID to specify SIZE(2..4)."
        REVISION "200501071220Z" -- 7 January 2005
        DESCRIPTION
            "Added a 'fusedBranch' bit definition to the outlet
             capabilities object.  Added 'offFuse' and 'onFuse' states
             to the outlet status object.  Modified the descriptions of
             objects and traps to reflect support for these additions."
        REVISION "200412091320Z" -- 9 December 2004
        DESCRIPTION
            "Corrected spelling errors.  Removed product acronyms from the
             trap annotations."
        REVISION "200411111200Z" -- 11 November 2004
        DESCRIPTION
            "Changed the upper limit of tempHumidSensorTempHighThresh to
             123.  Renamed systemSerialNumber to systemNICSerialNumber."
        REVISION "200311201300Z" -- 20 November 2003
        DESCRIPTION
            "Changed the MIB description to reflect that there are
             multiple products in the Sentry product family supported by
             this MIB."
        REVISION "200310231900Z" -- 23 October 2003
        DESCRIPTION
            "Added annotations to the trap definitions.  Added a
             'reading' state to the outletStatus object.  Renamed
             'notificationGroup' to 'sentry3Traps'.  Corrected the
             the description of the tempHumidSensorStatusEvent trap."
        REVISION "200310021100Z" -- 2 October 2003
        DESCRIPTION
            "Added a 'failSafe' bit definition to the infeed capabilities
             object, and corrected the definition of the 'defaultOff'
             infeed capabilities bit."
        REVISION "200308271600Z" -- 27 August 2003
        DESCRIPTION
            "Added new bit definitions to the infeed and outlet
             capabilities objects."
        REVISION "200303281700Z" -- 28 March 2003
        DESCRIPTION
            "Added environmental monitor objects and traps."
        REVISION "200303271700Z" -- 27 March 2003
        DESCRIPTION
            "Initial release."
        ::= { serverTech 3 }

    serverTech OBJECT IDENTIFIER ::= { enterprises 1718 }


--
--  System Group
--

    systemGroup OBJECT IDENTIFIER ::= { sentry3 1 }

    systemVersion OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..80))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The firmware version of the system."
        ::= { systemGroup 1 }

    systemNICSerialNumber OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..8))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The serial number of the network interface card in the
             system."
        ::= { systemGroup 2 }

    systemLocation OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..32))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The location of the system."
        ::= { systemGroup 3 }

    systemTowerCount OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of towers in the system."
        ::= { systemGroup 4 }

    systemEnvMonCount OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of environmental monitors in the system."
        ::= { systemGroup 5 }

    systemTotalPower OBJECT-TYPE
        SYNTAX      INTEGER(-1..150000)
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total power consumption of all of the input feeds in the
             system.  A non-negative value indicates the total power
             consumption in Watts.  A negative value indicates that the
             total power consumption was not available."
        ::= { systemGroup 6 }

    systemArea OBJECT-TYPE
        SYNTAX      INTEGER(0..1000)
        UNITS       "tenth area units"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The area that the footprint of the system occupies.  A
             non-zero non-negative value indicates the area in tenths of
             area units as selected by the systemAreaUnit object.  A zero
             or negative value indicates that the area was not available."
        ::= { systemGroup 7 }

    systemWattsPerAreaUnit OBJECT-TYPE
        SYNTAX      INTEGER(-1..1500000)
        UNITS       "Watts per area unit"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The system Watts per area unit.  A non-negative value
             indicates the power consumption per area unit as selected by
             the systemAreaUnit object.  A negative value indicates that
             the power consumption per area unit was not available."
        ::= { systemGroup 8 }

    systemAreaUnit OBJECT-TYPE
        SYNTAX      INTEGER {
                        squareMeter(0),
                        squareFoot(1)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The unit of area for the systemArea and systemWattsPerAreaUnit
             objects.  If the agent does not support this object, then the
             unit of area is a square foot."
        ::= { systemGroup 9 }

    systemPowerFactor OBJECT-TYPE
        SYNTAX      INTEGER(50..100)
        UNITS       "hundredths"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The power factor used in power calculations performed by the
             system."
        ::= { systemGroup 10 }

    systemFeatures OBJECT-TYPE
        SYNTAX      BITS {
                        smartLoadShedding(0),
                        snmpPOPS(1),
                        outletControlInhibit(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The key-activated features enabled in the system."
        ::= { systemGroup 11 }

    systemFeatureKey OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..19))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "A valid feature key written to this object will enable a
             feature in the system.  A valid feature key is in the form
             xxxx-xxxx-xxxx-xxxx.  A read of this object returns an
             empty string."
        ::= { systemGroup 12 }

    systemOutletSeqInterval OBJECT-TYPE
        SYNTAX      INTEGER(0..15)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The power-on sequencing interval for all outlets."
        ::= { systemGroup 13 }

    systemOutletRebootDelay OBJECT-TYPE
        SYNTAX      INTEGER(5..600)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The reboot delay for all outlets."
        ::= { systemGroup 14 }

    systemConfigModifiedCount OBJECT-TYPE
        SYNTAX      INTEGER(0..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of times the system configuration has
             changed."
        ::= { systemGroup 15 }

--
--  System Tables
--

    systemTables OBJECT IDENTIFIER ::= { sentry3 2 }

    --
    --  Tower Table
    --

    towerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF TowerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of towers."
        ::= { systemTables 1 }

    towerEntry OBJECT-TYPE
        SYNTAX      TowerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the tower table."
        INDEX       { towerIndex }
        ::= { towerTable 1 }

    TowerEntry ::= SEQUENCE {
        towerIndex           INTEGER,
        towerID              DisplayString,
        towerName            DisplayString,
        towerStatus          INTEGER,
        towerInfeedCount     INTEGER,
        towerProductSN       DisplayString,
        towerModelNumber     DisplayString,
        towerCapabilities    BITS,
        towerVACapacity      INTEGER,
        towerVACapacityUsed  INTEGER,
        towerActivePower     INTEGER,
        towerApparentPower   INTEGER,
        towerPowerFactor     INTEGER,
        towerEnergy          INTEGER,
        towerLineFrequency   INTEGER
    }

    towerIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the tower table."
        ::= { towerEntry 1 }

    towerID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(1))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the tower."
        ::= { towerEntry 2 }

    towerName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the tower."
        ::= { towerEntry 3 }

    towerStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        noComm(1),
                        fanFail(2),
                        overTemp(3),
                        nvmFail(4),
                        outOfBalance(5)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The operational status of the tower."
        ::= { towerEntry 4 }

    towerInfeedCount OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of input feeds on the tower."
        ::= { towerEntry 5 }

    towerProductSN OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..16))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The product serial number of the tower."
        ::= { towerEntry 6 }

    towerModelNumber OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The model number of the tower."
        ::= { towerEntry 7 }

    towerCapabilities OBJECT-TYPE
        SYNTAX      BITS {
                        failSafe(0),
                        fuseSense(1),
                        directCurrent(2),
                        threePhase(3),
                        fanSense(4),
                        tempSense(5)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The capabilities of the tower."
        ::= { towerEntry 8 }

    towerVACapacity OBJECT-TYPE
        SYNTAX      INTEGER(-1..50000)
        UNITS       "Volt-Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total apparent power capacity of the tower circuit.
             A non-negative value indicates the maximum total apparent
             power in Volt-Amps.  A negative value indicates that the
             total apparent power capacity was not available."
        ::= { towerEntry 9 }

    towerVACapacityUsed OBJECT-TYPE
        SYNTAX      INTEGER(-1..1500)
        UNITS       "tenth percentage"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The used percentage of the tower circuit total apparent power
             capacity (towerApparentPower / towerVACapacity x 100).  A
             non-negative value indicates the percentage of capacity used
             in tenths.  A negative value indicates that the percentage of
             capacity used was not available."
        ::= { towerEntry 10 }

    towerActivePower OBJECT-TYPE
        SYNTAX      INTEGER(-1..50000)
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total active power consumption of the tower circuit.
             A non-negative value indicates the total active power
             consumption in Watts.  A negative value indicates that the
             total active power consumption was not available."
        ::= { towerEntry 11 }

    towerApparentPower OBJECT-TYPE
        SYNTAX      INTEGER(-1..50000)
        UNITS       "Volt-Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total apparent power consumption of the tower circuit.
             A non-negative value indicates the total apparent power
             consumption in Volt-Amps.  A negative value indicates that
             the total apparent power consumption was not available."
        ::= { towerEntry 12 }

    towerPowerFactor OBJECT-TYPE
        SYNTAX      INTEGER(-1..100)
        UNITS       "hundredths"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The overall power factor of the tower circuit.  A non-
             negative value indicates the overall power factor in
             hundredths.  A negative value indicates that the overall
             power factor was not able to be measured."
        ::= { towerEntry 13 }

    towerEnergy OBJECT-TYPE
        SYNTAX      INTEGER(-1..2147483647)
        UNITS       "Kilowatt-Hours"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total energy consumption of the tower circuit.  A non-
             negative value indicates the total energy consumption in
             Kilowatt-Hours.  A negative value indicates that the total
             energy consumption was not available."
        ::= { towerEntry 14 }

    towerLineFrequency OBJECT-TYPE
        SYNTAX      INTEGER(-1..60)
        UNITS       "Hertz"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The frequency of the input feed line voltage.  A non-
             negative value indicates the frequency in Hertz.  A negative
             value indicates that the frequency was not available."
        ::= { towerEntry 15 }

    --
    --  Input Feed Table
    --

    infeedTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF InfeedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of input feeds."
        ::= { systemTables 2 }

    infeedEntry OBJECT-TYPE
        SYNTAX      InfeedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the input feed table."
        INDEX       { towerIndex, infeedIndex }
        ::= { infeedTable 1 }

    InfeedEntry ::= SEQUENCE {
        infeedIndex          INTEGER,
        infeedID             DisplayString,
        infeedName           DisplayString,
        infeedCapabilities   BITS,
        infeedStatus         INTEGER,
        infeedLoadStatus     INTEGER,
        infeedLoadValue      INTEGER,
        infeedLoadHighThresh INTEGER,
        infeedOutletCount    INTEGER,
        infeedCapacity       INTEGER,
        infeedVoltage        INTEGER,
        infeedPower          INTEGER,
        infeedApparentPower  INTEGER,
        infeedPowerFactor    INTEGER,
        infeedCrestFactor    INTEGER,
        infeedEnergy         INTEGER,
        infeedReactance      INTEGER,
        infeedPhaseVoltage   INTEGER,
        infeedPhaseCurrent   INTEGER,
        infeedCapacityUsed   INTEGER,
        infeedLineID         DisplayString,
        infeedLineToLineID   DisplayString,
        infeedPhaseID        DisplayString,
        infeedVACapacity     INTEGER,
        infeedVACapacityUsed INTEGER
    }

    infeedIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the input feed table."
        ::= { infeedEntry 1 }

    infeedID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(2))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the input feed."
        ::= { infeedEntry 2 }

    infeedName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the input feed."
        ::= { infeedEntry 3 }

    infeedCapabilities OBJECT-TYPE
        SYNTAX      BITS {
                        onSense(0),
                        loadSense(1),
                        powerControl(2),
                        failSafe(3),
                        defaultOff(4),
                        voltageSense(5),
                        powerSense(6),
                        branchOnSense(7),
                        branchLoadSense(8)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The capabilities of the input feed."
        ::= { infeedEntry 4 }

    infeedStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        off(0),
                        on(1),
                        offWait(2),
                        onWait(3),
                        offError(4),
                        onError(5),
                        noComm(6),
                        reading(7),
                        offFuse(8),
                        onFuse(9)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the input feed line.  If the infeedCapabilities
             'onSense' bit is TRUE, then all of the states are supported
             and indicate the sensed state of the input feed.  If the
             infeedCapabilities 'onSense' bit is FALSE, then only the
             'on' and 'noComm' states are supported, and 'on' indicates
             a derived state, not a sensed state."
        ::= { infeedEntry 5 }

    infeedLoadStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        notOn(1),
                        reading(2),
                        loadLow(3),
                        loadHigh(4),
                        overLoad(5),
                        readError(6),
                        noComm(7)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the load measured on the input feed line.  If
             the infeedCapabilities 'loadSense' bit is TRUE, then all of
             the states are supported.  If the infeedCapabilities
             'loadSense' bit is FALSE, then only the 'normal' and 'noComm'
             states are supported."
        ::= { infeedEntry 6 }

    infeedLoadValue OBJECT-TYPE
        SYNTAX      INTEGER(-1..60000)
        UNITS       "hundredth Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The load measured on the input feed line.  A non-negative
             value indicates the measured load in hundredths of Amps.  A
             negative value indicates that a load value was not able to
             be measured."
        ::= { infeedEntry 7 }

    infeedLoadHighThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..600)
        UNITS       "Amps"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The load high threshold value of the input feed line in Amps."
        ::= { infeedEntry 8 }

    infeedOutletCount OBJECT-TYPE
        SYNTAX      INTEGER(0..64)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of controlled and/or monitored outlets on the
             input feed."
        ::= { infeedEntry 9 }

    infeedCapacity OBJECT-TYPE
        SYNTAX      INTEGER(-1..600)
        UNITS       "Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The load capacity of the input feed line.  A non-negative
             value indicates the maximum load in Amps.  A negative
             value indicates that the capacity was not available."
        ::= { infeedEntry 10 }

    infeedVoltage OBJECT-TYPE
        SYNTAX      INTEGER(-1..4800)
        UNITS       "tenth Volts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The line-to-line voltage of the input feed.  A non-negative
             value indicates the voltage in tenths of Volts.  A negative
             value indicates that the voltage was not available."
        ::= { infeedEntry 11 }

    infeedPower OBJECT-TYPE
        SYNTAX      INTEGER(-1..25000)
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The active power consumption of the input feed phase.  A non-
             negative value indicates the active power consumption in
             Watts.  A negative value indicates that the active power
             consumption was not available."
        ::= { infeedEntry 12 }

    infeedApparentPower OBJECT-TYPE
        SYNTAX      INTEGER(-1..25000)
        UNITS       "Volt-Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The apparent power consumption of the input feed phase.  A
             non-negative value indicates the apparent power consumption
             in Volt-Amps.  A negative value indicates that the apparent
             power consumption was not available."
        ::= { infeedEntry 13 }

    infeedPowerFactor OBJECT-TYPE
        SYNTAX      INTEGER(-1..100)
        UNITS       "hundredths"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The power factor of the input feed phase.  A non-negative
             value indicates the power factor in hundredths.  A negative
             value indicates that the power factor was not able to be
             measured."
        ::= { infeedEntry 14 }

    infeedCrestFactor OBJECT-TYPE
        SYNTAX      INTEGER(-1..1000)
        UNITS       "tenths"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The crest factor for the load of the input feed phase.  A
             non-negative value indicates the crest factor in tenths.  A
             negative value indicates that the crest factor was not able
             to be measured."
        ::= { infeedEntry 15 }

    infeedEnergy OBJECT-TYPE
        SYNTAX      INTEGER(-1..2147483647)
        UNITS       "tenth Kilowatt-Hours"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The energy consumption of the input feed phase.  A non-
             negative value indicates the energy consumption in tenths of
             Kilowatt-Hours.  A negative value indicates that the energy
             consumption was not available."
        ::= { infeedEntry 16 }

    infeedReactance OBJECT-TYPE
        SYNTAX      INTEGER {
                        unknown(0),
                        capacitive(1),
                        inductive(2),
                        resistive(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The characterization of the phase relation between the
             voltage and current of the input feed phase."
        ::= { infeedEntry 17 }

    infeedPhaseVoltage OBJECT-TYPE
        SYNTAX      INTEGER(-1..2640)
        UNITS       "tenth Volts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The voltage measured for the input feed phase.  A non-
             negative value indicates the voltage in tenths of Volts.  A
             negative value indicates that the voltage was not available."
        ::= { infeedEntry 18 }

    infeedPhaseCurrent OBJECT-TYPE
        SYNTAX      INTEGER(-1..25500)
        UNITS       "hundredth Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The current measured for the input feed phase.  A non-
             negative value indicates the measured load in hundredths of
             Amps.  A negative value indicates that a load value was not
             able to be measured."
        ::= { infeedEntry 19 }

    infeedCapacityUsed OBJECT-TYPE
        SYNTAX      INTEGER(-1..1500)
        UNITS       "tenth percentage"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The used percentage of the input feed line load capacity
             (infeedLoadValue / infeedCapacity x 100).  A non-negative
             value indicates the percentage of capacity used in tenths.
             A negative value indicates that the percentage of capacity
             used was not available."
        ::= { infeedEntry 20 }

    infeedLineID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..4))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the input feed line."
        ::= { infeedEntry 21 }

    infeedLineToLineID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..7))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The line-to-line ID of the input feed."
        ::= { infeedEntry 22 }

    infeedPhaseID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..6))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the input feed phase."
        ::= { infeedEntry 23 }

    infeedVACapacity OBJECT-TYPE
        SYNTAX      INTEGER(-1..25000)
        UNITS       "Volt-Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The apparent power capacity of the input feed circuit.  A
             non-negative value indicates the maximum apparent power in
             Volt-Amps.  A negative value indicates that the apparent
             power capacity was not available."
        ::= { infeedEntry 24 }

    infeedVACapacityUsed OBJECT-TYPE
        SYNTAX      INTEGER(-1..1500)
        UNITS       "tenth percentage"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The used percentage of the input feed circuit apparent power
             capacity (infeedApparentPower / infeedVACapacity x 100).  A
             non-negative value indicates the percentage of capacity used
             in tenths.  A negative value indicates that the percentage of
             capacity used was not available."
        ::= { infeedEntry 25 }

    --
    --  Outlet Table
    --

    outletTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF OutletEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of outlets."
        ::= { systemTables 3 }

    outletEntry OBJECT-TYPE
        SYNTAX      OutletEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the outlet table."
        INDEX       { towerIndex, infeedIndex, outletIndex }
        ::= { outletTable 1 }

    OutletEntry ::= SEQUENCE {
        outletIndex          INTEGER,
        outletID             DisplayString,
        outletName           DisplayString,
        outletCapabilities   BITS,
        outletStatus         INTEGER,
        outletLoadStatus     INTEGER,
        outletLoadValue      INTEGER,
        outletLoadLowThresh  INTEGER,
        outletLoadHighThresh INTEGER,
        outletControlState   INTEGER,
        outletControlAction  INTEGER,
        outletCapacity       INTEGER,
        outletVoltage        INTEGER,
        outletPower          INTEGER,
        outletApparentPower  INTEGER,
        outletPowerFactor    INTEGER,
        outletCrestFactor    INTEGER,
        outletEnergy         INTEGER,
        outletWakeupState    INTEGER,
        outletPostOnDelay    INTEGER
    }

    outletIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..64)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the outlet table."
        ::= { outletEntry 1 }

    outletID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(2..4))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the outlet."
        ::= { outletEntry 2 }

    outletName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the outlet."
        ::= { outletEntry 3 }

    outletCapabilities OBJECT-TYPE
        SYNTAX      BITS {
                        onSense(0),
                        loadSense(1),
                        powerControl(2),
                        shutdown(3),
                        defaultOn(4),
                        ownInfeed(5),
                        fusedBranch(6),
                        voltageSense(7),
                        powerSense(8)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The capabilities of the outlet."
        ::= { outletEntry 4 }

    outletStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        off(0),
                        on(1),
                        offWait(2),
                        onWait(3),
                        offError(4),
                        onError(5),
                        noComm(6),
                        reading(7),
                        offFuse(8),
                        onFuse(9)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the outlet.  If the outletCapabilities
             'onSense' bit is TRUE, then the state indicates the sensed
             state of the outlet, not a derived state, and 'offError'
             and 'onError' are supported to indicate a mismatch between
             the control and sensed state.  If the outletCapabilities
             'fusedBranch' bit is TRUE, then the outlet is on a fused
             branch circuit that can detect the fuse state, and 'offFuse'
             and 'onFuse' are supported to indicate a fuse error."
        ::= { outletEntry 5 }

    outletLoadStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        notOn(1),
                        reading(2),
                        loadLow(3),
                        loadHigh(4),
                        overLoad(5),
                        readError(6),
                        noComm(7)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the load measured on the outlet.  If the 
             outletCapabilities 'loadSense' bit is TRUE, then all of the
             states are supported.  If the outletCapabilities 'loadSense'
             bit is FALSE, then only the 'normal' and 'noComm' states are
             supported."
        ::= { outletEntry 6 }

    outletLoadValue OBJECT-TYPE
        SYNTAX      INTEGER(-1..25500)
        UNITS       "hundredth Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The load measured on the outlet.  A non-negative value
             indicates the measured load in hundredths of Amps.  A
             negative value indicates that a load value was not able to
             be measured."
        ::= { outletEntry 7 }

    outletLoadLowThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..255)
        UNITS       "Amps"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The load low threshold value of the outlet in Amps."
        ::= { outletEntry 8 }

    outletLoadHighThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..255)
        UNITS       "Amps"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The load high threshold value of the outlet in Amps."
        ::= { outletEntry 9 }

    outletControlState OBJECT-TYPE
        SYNTAX      INTEGER {
                        idleOff(0),
                        idleOn(1),
                        wakeOff(2),
                        wakeOn(3),
                        off(4),
                        on(5),
                        lockedOff(6),
                        lockedOn(7),
                        reboot(8),
                        shutdown(9),
                        pendOn(10),
                        pendOff(11),
                        minimumOff(12),
                        minimumOn(13),
                        eventOff(14),
                        eventOn(15),
                        eventReboot(16),
                        eventShutdown(17)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The control state of the outlet.  The supported states are
             dependent upon the outletCapabilities 'powerControl' and
             'shutdown' bits, as well as the supported features of the
             firmware version."
        ::= { outletEntry 10 }

    outletControlAction OBJECT-TYPE
        SYNTAX      INTEGER {
                        none(0),
                        on(1),
                        off(2),
                        reboot(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "An action to change the control state of the outlet.  If
             the outletCapabilities 'powerControl' bit is TRUE, then the
             'on', 'off', and 'reboot' actions can be used to change the
             control state of the outlet.  If the outletCapabilities
             'powerControl' bit is FALSE, then the actions have no
             effect."
        ::= { outletEntry 11 }

    outletCapacity OBJECT-TYPE
        SYNTAX      INTEGER(-1..255)
        UNITS       "Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The load capacity of the outlet.  A non-negative value
             indicates the maximum load in Amps.  A negative value
             indicates that the capacity was not available."
        ::= { outletEntry 12 }

    outletVoltage OBJECT-TYPE
        SYNTAX      INTEGER(-1..2640)
        UNITS       "tenth Volts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The voltage of the outlet.  A non-negative value indicates
             the voltage in tenths of Volts.  A negative value indicates
             that the voltage was not available."
        ::= { outletEntry 13 }

    outletPower OBJECT-TYPE
        SYNTAX      INTEGER(-1..10000)
        UNITS       "Watts"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The active power consumption of the device plugged into the
             outlet.  A non-negative value indicates the active power
             consumption in Watts.  A negative value indicates that the
             active power consumption was not available."
        ::= { outletEntry 14 }

    outletApparentPower OBJECT-TYPE
        SYNTAX      INTEGER(-1..10000)
        UNITS       "Volt-Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The apparent power consumption of the device plugged into
             the outlet.  A non-negative value indicates the apparent
             power consumption in Volt-Amps.  A negative value indicates
             that the apparent power consumption was not available."
        ::= { outletEntry 15 }

    outletPowerFactor OBJECT-TYPE
        SYNTAX      INTEGER(-1..100)
        UNITS       "hundredths"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The power factor of the device plugged into the outlet.  A
             non-negative value indicates the power factor in hundredths.
             A negative value indicates that the power factor was not able
             to be measured."
        ::= { outletEntry 16 }

    outletCrestFactor OBJECT-TYPE
        SYNTAX      INTEGER(-1..1000)
        UNITS       "tenths"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The crest factor for the load of the device plugged into the
             outlet.  A non-negative value indicates the crest factor in
             tenths.  A negative value indicates that the crest factor
             was not able to be measured."
        ::= { outletEntry 17 }

    outletEnergy OBJECT-TYPE
        SYNTAX      INTEGER(-1..2147483647)
        UNITS       "Watt-Hours"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The energy consumption of the device plugged into the outlet.
             A non-negative value indicates the energy consumption in
             Watt-Hours.  A negative value indicates that the energy
             consumption was not available."
        ::= { outletEntry 18 }

    outletWakeupState OBJECT-TYPE
        SYNTAX      INTEGER {
                        last(1),
                        off(2),
                        on(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The wakeup state of the outlet."
        ::= { outletEntry 19 }

    outletPostOnDelay OBJECT-TYPE
        SYNTAX      INTEGER(0..900)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The post-on delay of the outlet."
        ::= { outletEntry 20 }

    --
    --  Environmental Monitor Table
    --

    envMonTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF EnvMonEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of environmental monitors."
        ::= { systemTables 4 }

    envMonEntry OBJECT-TYPE
        SYNTAX      EnvMonEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the environmental monitor table."
        INDEX       { envMonIndex }
        ::= { envMonTable 1 }

    EnvMonEntry ::= SEQUENCE {
        envMonIndex                INTEGER,
        envMonID                   DisplayString,
        envMonName                 DisplayString,
        envMonStatus               INTEGER,
        envMonWaterSensorName      DisplayString,
        envMonWaterSensorStatus    INTEGER,
        envMonADCName              DisplayString,
        envMonADCStatus            INTEGER,
        envMonADCCount             INTEGER,
        envMonADCLowThresh         INTEGER,
        envMonADCHighThresh        INTEGER,
        envMonTempHumidSensorCount INTEGER,
        envMonContactClosureCount  INTEGER
    }

    envMonIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the environmental monitor table."
        ::= { envMonEntry 1 }

    envMonID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(1))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the environmental monitor."
        ::= { envMonEntry 2 }

    envMonName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the environmental monitor."
        ::= { envMonEntry 3 }

    envMonStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        noComm(1)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The operational status of the environmental monitor."
        ::= { envMonEntry 4 }

    envMonWaterSensorName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the water sensor."
        ::= { envMonEntry 5 }

    envMonWaterSensorStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        alarm(1),
                        noComm(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the water sensor."
        ::= { envMonEntry 6 }

    envMonADCName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the analog-to-digital converter."
        ::= { envMonEntry 7 }

    envMonADCStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        reading(1),
                        countLow(2),
                        countHigh(3),
                        readError(4),
                        noComm(5)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the analog-to-digital converter."
        ::= { envMonEntry 8 }

    envMonADCCount OBJECT-TYPE
        SYNTAX      INTEGER(-1..255)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The 8-bit count value from the analog-to-digital converter.
             A non-negative value indicates the digital value retrieved
             from the ADC.  A negative value indicates that a digital
             value was not able to be retrieved."
        ::= { envMonEntry 9 }

    envMonADCLowThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..255)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The 8-bit count low threshold value of the analog-to-digital
             converter."
        ::= { envMonEntry 10 }

    envMonADCHighThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..255)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The 8-bit count high threshold value of the analog-to-digital
             converter."
        ::= { envMonEntry 11 }

    envMonTempHumidSensorCount OBJECT-TYPE
        SYNTAX      INTEGER(0..2)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of temperature/humidity sensors on the
             environmental monitor."
        ::= { envMonEntry 12 }

    envMonContactClosureCount OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of contact closures on the environmental
             monitor."
        ::= { envMonEntry 13 }

    --
    --  Temperature/Humidity Sensor Table
    --

    tempHumidSensorTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF TempHumidSensorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of temperature/humidity sensors."
        ::= { systemTables 5 }

    tempHumidSensorEntry OBJECT-TYPE
        SYNTAX      TempHumidSensorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the temperature/humidity sensor table."
        INDEX       { envMonIndex, tempHumidSensorIndex }
        ::= { tempHumidSensorTable 1 }

    TempHumidSensorEntry ::= SEQUENCE {
        tempHumidSensorIndex           INTEGER,
        tempHumidSensorID              DisplayString,
        tempHumidSensorName            DisplayString,
        tempHumidSensorStatus          INTEGER,
        tempHumidSensorTempStatus      INTEGER,
        tempHumidSensorTempValue       INTEGER,
        tempHumidSensorTempLowThresh   INTEGER,
        tempHumidSensorTempHighThresh  INTEGER,
        tempHumidSensorHumidStatus     INTEGER,
        tempHumidSensorHumidValue      INTEGER,
        tempHumidSensorHumidLowThresh  INTEGER,
        tempHumidSensorHumidHighThresh INTEGER,
        tempHumidSensorTempScale       INTEGER,
        tempHumidSensorTempRecDelta    INTEGER,
        tempHumidSensorHumidRecDelta   INTEGER
    }

    tempHumidSensorIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..2)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the temperature/humidity sensor table."
        ::= { tempHumidSensorEntry 1 }

    tempHumidSensorID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(2))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the temperature/humidity sensor."
        ::= { tempHumidSensorEntry 2 }

    tempHumidSensorName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the temperature/humidity sensor."
        ::= { tempHumidSensorEntry 3 }

    tempHumidSensorStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        found(0),
                        notFound(1),
                        lost(2),
                        noComm(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The operational status of the temperature/humidity sensor."
        ::= { tempHumidSensorEntry 4 }

    tempHumidSensorTempStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        notFound(1),
                        reading(2),
                        tempLow(3),
                        tempHigh(4),
                        readError(5),
                        lost(6),
                        noComm(7)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the temperature sensor."
        ::= { tempHumidSensorEntry 5 }

    tempHumidSensorTempValue OBJECT-TYPE
        SYNTAX      INTEGER(-1..2540)
        UNITS       "tenth degrees"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The temperature measured by the sensor.  A non-negative value
             indicates the measured temperature in tenths of degrees, using
             the scale selected by tempHumidSensorTempScale.  If the agent
             does not support the tempHumidSensorTempScale object, then the
             temperature scale used is Celsius.  A negative value indicates
             that a temperature value was not able to be measured."
        ::= { tempHumidSensorEntry 6 }

    tempHumidSensorTempLowThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..254)
        UNITS       "degrees"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The temperature low threshold value of the sensor in degrees,
             using the scale selected by tempHumidSensorTempScale.  If the
             agent does not support the tempHumidSensorTempScale object,
             then the temperature scale used is Celsius."
        ::= { tempHumidSensorEntry 7 }

    tempHumidSensorTempHighThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..254)
        UNITS       "degrees"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The temperature high threshold value of the sensor in degrees,
             using the scale selected by tempHumidSensorTempScale.  If the
             agent does not support the tempHumidSensorTempScale object,
             then the temperature scale used is Celsius."
        ::= { tempHumidSensorEntry 8 }

    tempHumidSensorHumidStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        notFound(1),
                        reading(2),
                        humidLow(3),
                        humidHigh(4),
                        readError(5),
                        lost(6),
                        noComm(7)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the humidity sensor."
        ::= { tempHumidSensorEntry 9 }

    tempHumidSensorHumidValue OBJECT-TYPE
        SYNTAX      INTEGER(-1..100)
        UNITS       "percentage relative humidity"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The humidity measured by the sensor.  A non-negative value
             indicates the measured humidity in percentage relative
             humidity.  A negative value indicates that a humidity value
             was not able to be measured."
        ::= { tempHumidSensorEntry 10 }

    tempHumidSensorHumidLowThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..100)
        UNITS       "percentage relative humidity"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The humidity low threshold value of the sensor in percentage
             relative humidity."
        ::= { tempHumidSensorEntry 11 }

    tempHumidSensorHumidHighThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..100)
        UNITS       "percentage relative humidity"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The humidity low threshold value of the sensor in percentage
             relative humidity."
        ::= { tempHumidSensorEntry 12 }

    tempHumidSensorTempScale OBJECT-TYPE
        SYNTAX      INTEGER {
                        celsius(0),
                        fahrenheit(1)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The scale used for temperature values.  This is a global
             setting for all temperature values in the system.  If the
             agent does not support this object, then the temperature
             scale used is Celsius."
        ::= { tempHumidSensorEntry 13 }

    tempHumidSensorTempRecDelta OBJECT-TYPE
        SYNTAX      INTEGER(0..54)
        UNITS       "degrees"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The temperature recovery delta (hysteresis) value of the
             sensor in degrees, using the scale selected by
             tempHumidSensorTempScale."
        ::= { tempHumidSensorEntry 14 }

    tempHumidSensorHumidRecDelta OBJECT-TYPE
        SYNTAX      INTEGER(0..20)
        UNITS       "percentage relative humidity"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The humidity recovery delta (hysteresis) value of the
             sensor in percentage relative humidity."
        ::= { tempHumidSensorEntry 15 }

    --
    --  Contact Closure Table
    --

    contactClosureTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF ContactClosureEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of contact closures."
        ::= { systemTables 6 }

    contactClosureEntry OBJECT-TYPE
        SYNTAX      ContactClosureEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the contact closure table."
        INDEX       { envMonIndex, contactClosureIndex }
        ::= { contactClosureTable 1 }

    ContactClosureEntry ::= SEQUENCE {
        contactClosureIndex     INTEGER,
        contactClosureID        DisplayString,
        contactClosureName      DisplayString,
        contactClosureStatus    INTEGER
    }

    contactClosureIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the contact closure table."
        ::= { contactClosureEntry 1 }

    contactClosureID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(2))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the contact closure."
        ::= { contactClosureEntry 2 }

    contactClosureName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the contact closure."
        ::= { contactClosureEntry 3 }

    contactClosureStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        alarm(1),
                        noComm(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the contact closure."
        ::= { contactClosureEntry 4 }

    --
    --  Branch Table
    --

    branchTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF BranchEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table of branches."
        ::= { systemTables 7 }

    branchEntry OBJECT-TYPE
        SYNTAX      BranchEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Row definition for the branch table."
        INDEX       { towerIndex, infeedIndex, branchIndex }
        ::= { branchTable 1 }

    BranchEntry ::= SEQUENCE {
        branchIndex          INTEGER,
        branchID             DisplayString,
        branchName           DisplayString,
        branchCapabilities   BITS,
        branchStatus         INTEGER,
        branchLoadStatus     INTEGER,
        branchLoadValue      INTEGER,
        branchLoadHighThresh INTEGER,
        branchCapacity       INTEGER
    }

    branchIndex OBJECT-TYPE
        SYNTAX      INTEGER(0..4)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the branch table."
        ::= { branchEntry 1 }

    branchID OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(3))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The ID of the branch."
        ::= { branchEntry 2 }

    branchName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..24))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The name of the branch."
        ::= { branchEntry 3 }

    branchCapabilities OBJECT-TYPE
        SYNTAX      BITS {
                        onSense(0),
                        loadSense(1)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The capabilities of the branch."
        ::= { branchEntry 4 }

    branchStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        off(0),
                        on(1),
                        offWait(2),
                        onWait(3),
                        offError(4),
                        onError(5),
                        noComm(6),
                        reading(7),
                        offFuse(8),
                        onFuse(9)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the branch."
        ::= { branchEntry 5 }

    branchLoadStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        normal(0),
                        notOn(1),
                        reading(2),
                        loadLow(3),
                        loadHigh(4),
                        overLoad(5),
                        readError(6),
                        noComm(7)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The status of the load measured on the branch."
        ::= { branchEntry 6 }

    branchLoadValue OBJECT-TYPE
        SYNTAX      INTEGER(-1..4000)
        UNITS       "hundredth Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The load measured on the branch.  A non-negative
             value indicates the measured load in hundredths of Amps.  A
             negative value indicates that a load value was not able to
             be measured."
        ::= { branchEntry 7 }

    branchLoadHighThresh OBJECT-TYPE
        SYNTAX      INTEGER(0..40)
        UNITS       "Amps"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The load high threshold value of the branch in Amps."
        ::= { branchEntry 8 }

    branchCapacity OBJECT-TYPE
        SYNTAX      INTEGER(-1..40)
        UNITS       "Amps"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The load capacity of the branch.  A non-negative value
             indicates the maximum load in Amps.  A negative value
             indicates that the capacity was not available."
        ::= { branchEntry 9 }

--
--  Event Information Group
--

    eventInformationGroup OBJECT IDENTIFIER ::= { sentry3 99 }

    eventStatusText OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The text representation of the enumerated integer value of
             the status object included in a trap.  The value of this
             object is set only when sent with a trap.  A get of this
             object will return a NULL string."
        ::= { eventInformationGroup 1 }

    eventStatusCondition OBJECT-TYPE
        SYNTAX      INTEGER {
                        nonError(0),
                        error(1)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The condition of the enumerated integer value of the status
             object included in a trap.  The value of this object is set
             only when sent with a trap.  A get of this object will
             return zero."
        ::= { eventInformationGroup 2 }

--
--  Notifications
--

    sentry3Traps OBJECT IDENTIFIER ::= { sentry3 100 }

    events OBJECT IDENTIFIER ::= { sentry3Traps 0 }
    -- the 0 is for V1 compatibility

    -- Tower Traps

    towerStatusEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            towerID,
            towerName,
            towerStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Tower status event.  If enabled, this trap is sent when the
             towerStatus indicates an error state ('noComm', 'fanFail',
             'overTemp', 'nvmFail', or 'outOfBalance').  This trap is
             repeated periodically while the towerStatus remains in an
             error state.  If the towerStatus returns to a non-error
             state ('normal'), this trap is sent once more with the
             non-error towerStatus, and then stops being repeated.

             While the towerStatus indicates a 'noComm' error state, all
             status and load traps are suppressed for input feeds and
             outlets on the tower."
        --#TYPE "Sentry: Tower Status Event."
        --#SUMMARY "Status of Tower '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 1 }

    -- Input Feed Traps

    infeedStatusEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            infeedID,
            infeedName,
            infeedStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Input feed status event.  If enabled, this trap is sent when
             the infeedStatus indicates an error state ('offError',
             'onError', 'noComm', 'offFuse', or 'onFuse').  This trap is
             repeated periodically while the infeedStatus remains in an
             error state.  If the infeedStatus returns to a non-error
             state ('off' or 'on'), this trap is sent once more with the
             non-error infeedStatus, and then stops being repeated.

             While the infeedStatus indicates an error state, load
             traps are suppressed for the input feed, and, if the
             infeedCapabilities 'failSafe' bit is FALSE, all status and
             load traps are suppressed for outlets on the input feed."
        --#TYPE "Sentry: Input Feed Status Event."
        --#SUMMARY "Status of Input Feed '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 2 }

    infeedLoadEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            infeedID,
            infeedName,
            infeedLoadStatus,
            infeedLoadValue,
            infeedLoadHighThresh,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Input feed load event.  If enabled, this trap is sent when
             the infeedLoadStatus indicates an error state ('loadLow',
             'loadHigh', 'overLoad', 'readError', or 'noComm').  This
             trap is repeated periodically while the infeedLoadStatus
             remains in an error state.  If the infeedLoadStatus returns
             to a non-error state ('normal' or 'notOn'), this trap is
             sent once more with the non-error infeedLoadStatus, and then
             stops being repeated."
        --#TYPE "Sentry: Input Feed Load Event."
        --#SUMMARY "Load Status of Input Feed '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 6 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 3 }

    -- Outlet Traps

    outletStatusEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            outletID,
            outletName,
            outletStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Outlet status event.  If enabled, this trap is sent when the
             outletStatus indicates an error state ('offError', 'onError',
             'noComm', 'offFuse', or 'onFuse').  This trap is repeated
             periodically while the outletStatus remains in an error state.
             If the outletStatus returns to a non-error state ('off' or
             'on'), this trap is sent once more with the non-error
             outletStatus, and then stops being repeated.

             While the outletStatus indicates an error state, load traps
             are suppressed for the outlet."
        --#TYPE "Sentry: Outlet Status Event."
        --#SUMMARY "Status of Outlet '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 4 }

    outletLoadEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            outletID,
            outletName,
            outletLoadStatus,
            outletLoadValue,
            outletLoadLowThresh,
            outletLoadHighThresh,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Outlet load event.  If enabled, this trap is sent when the
             outletLoadStatus indicates an error state ('loadLow',
             'loadHigh', 'overLoad', 'readError', or 'noComm').  This
             trap is repeated periodically while the outletLoadStatus
             remains in an error state.  If the outletLoadStatus returns
             to a non-error state ('normal' or 'notOn'), this trap is
             sent once more with the non-error outletLoadStatus, and then
             stops being repeated."
        --#TYPE "Sentry: Outlet Load Event."
        --#SUMMARY "Load Status of Outlet '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 7 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 5 }

    outletChangeEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            outletID,
            outletName,
            outletStatus,
            outletControlState,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Outlet on/off change event.  If enabled, this trap is sent
             when the outletStatus changes from any 'on' state ('on',
             'onWait', 'onError', or 'onFuse') to any 'off' state ('off',
             'offWait', 'offError', or 'offFuse'), and vice-versa."
        --#TYPE "Sentry: Outlet Change Event."
        --#SUMMARY "Outlet '%s' (%s) has changed to '%s'."
        --#ARGUMENTS { 2, 1, 5 }
        --#SEVERITY INFORMATIONAL
        --#GENERIC 6
        --#CATEGORY "Status Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 6 }

    -- Environmental Monitor Traps

    envMonStatusEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            envMonID,
            envMonName,
            envMonStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Environmental monitor status event.  If enabled, this trap
             is sent when the envMonStatus indicates an error state
             ('noComm').  This trap is repeated periodically while the
             envMonStatus remains in an error state.  If the envMonStatus
             returns to a non-error state ('normal'), this trap is sent
             once more with the non-error envMonStatus, and then stops
             being repeated.

             While the envMonStatus indicates an error state, all status
             traps are suppressed for the water sensor, ADC, temperature/
             humidity sensors, and contact closures on the environmental
             monitor."
        --#TYPE "Sentry: Environmental Monitor Status Event."
        --#SUMMARY "Status of Environmental Monitor '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 7 }

    envMonWaterSensorEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            envMonID,
            envMonWaterSensorName,
            envMonWaterSensorStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Environmental monitor water sensor event.  If enabled, this
             trap is sent when the envMonWaterSensorStatus indicates an
             error state ('alarm').  This trap is repeated periodically
             while the envMonWaterSensorStatus remains in an error state.
             If the envMonWaterSensorStatus returns to a non-error state
             ('normal'), this trap is sent once more with the non-error
             envMonWaterSensorStatus, and then stops being repeated."
        --#TYPE "Sentry: Water Sensor Event."
        --#SUMMARY "Status of Water Sensor '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 8 }

    envMonADCEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            envMonID,
            envMonADCName,
            envMonADCStatus,
            envMonADCCount,
            envMonADCLowThresh,
            envMonADCHighThresh,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Environmental monitor analog-to-digital converter event.
             If enabled, this trap is sent when the envMonADCStatus
             indicates an error state ('countLow' or 'countHigh').  This
             trap is repeated periodically while the envMonADCStatus
             remains in an error state.  If the envMonADCStatus returns
             to a non-error state ('normal'), this trap is sent once more
             with the non-error envMonADCStatus, and then stops being
             repeated."
        --#TYPE "Sentry: ADC Event."
        --#SUMMARY "Status of ADC '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 7 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 9 }

    tempHumidSensorStatusEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            tempHumidSensorID,
            tempHumidSensorName,
            tempHumidSensorStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Temperature/humidity sensor status event.  If enabled, this
             trap is sent when the tempHumidSensorStatus indicates an
             error state ('lost').  This trap is repeated periodically
             while the tempHumidSensorStatus remains in an error state.
             If the tempHumidSensorStatus returns to a non-error state
             ('found'), this trap is sent once more with the non-error
             tempHumidSensorStatus, and then stops being repeated.

             While the tempHumidSensorStatus indicates an error state, all
             temperature and humidity status traps are suppressed for the
             temperature/humidity sensor."
        --#TYPE "Sentry: T/H Sensor Status Event."
        --#SUMMARY "Status of T/H Sensor '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 10 }

    tempHumidSensorTempEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            tempHumidSensorID,
            tempHumidSensorName,
            tempHumidSensorTempStatus,
            tempHumidSensorTempValue,
            tempHumidSensorTempLowThresh,
            tempHumidSensorTempHighThresh,
            tempHumidSensorTempScale,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Temperature/humidity sensor temperature event.  If enabled,
             this trap is sent when the tempHumidSensorTempStatus
             indicates an error state ('tempLow' or 'tempHigh').
             This trap is repeated periodically while the
             tempHumidSensorTempStatus remains in an error state.  If
             the tempHumidSensorTempStatus returns to a non-error state
             ('normal'), this trap is sent once more with the non-error
             tempHumidSensorTempStatus, and then stops being repeated."
        --#TYPE "Sentry: T/H Sensor Temperature Event."
        --#SUMMARY "Temperature Status of T/H Sensor '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 8 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 11 }

    tempHumidSensorHumidEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            tempHumidSensorID,
            tempHumidSensorName,
            tempHumidSensorHumidStatus,
            tempHumidSensorHumidValue,
            tempHumidSensorHumidLowThresh,
            tempHumidSensorHumidHighThresh,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Temperature/humidity sensor humidity event.  If enabled,
             this trap is sent when the tempHumidSensorHumidStatus
             indicates an error state ('humidLow' or 'humidHigh').
             This trap is repeated periodically while the
             tempHumidSensorHumidStatus remains in an error state.  If
             the tempHumidSensorHumidStatus returns to a non-error state
             ('normal'), this trap is sent once more with the non-error
             tempHumidSensorHumidStatus, and then stops being repeated."
        --#TYPE "Sentry: T/H Sensor Humidity Event."
        --#SUMMARY "Humidity Status of T/H Sensor '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 7 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 12 }

    contactClosureEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            contactClosureID,
            contactClosureName,
            contactClosureStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Contact closure event.  If enabled, this trap is sent when
             the contactClosureStatus indicates an error state ('alarm').
             This trap is repeated periodically while the
             contactClosureStatus remains in an error state.  If the
             contactClosureStatus returns to a non-error state ('normal'),
             this trap is sent once more with the non-error
             contactClosureStatus, and then stops being repeated."
        --#TYPE "Sentry: Contact Closure Event."
        --#SUMMARY "Status of Contact Closure '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 13 }

    -- Branch Traps

    branchStatusEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            branchID,
            branchName,
            branchStatus,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Branch status event.  If enabled, this trap is sent when
             the branchStatus indicates an error state ('offError',
             'onError', 'noComm', 'offFuse', or 'onFuse').  This trap
             is repeated periodically while the branchStatus remains in
             an error state.  If the branchStatus returns to a non-error
             state ('off' or 'on'), this trap is sent once more with the
             non-error branchStatus, and then stops being repeated.

             While the branchStatus indicates an error state, load traps
             are suppressed for the branch."
        --#TYPE "Sentry: Branch Status Event."
        --#SUMMARY "Status of Branch '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 4 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 14 }

    branchLoadEvent NOTIFICATION-TYPE
        OBJECTS {
            systemLocation,
            branchID,
            branchName,
            branchLoadStatus,
            branchLoadValue,
            branchLoadHighThresh,
            eventStatusText,
            eventStatusCondition
        }
        STATUS      current
        DESCRIPTION
            "Branch load event.  If enabled, this trap is sent when
             the branchLoadStatus indicates an error state ('loadLow',
             'loadHigh', 'overLoad', 'readError', or 'noComm').  This
             trap is repeated periodically while the branchLoadStatus
             remains in an error state.  If the branchLoadStatus returns
             to a non-error state ('normal' or 'notOn'), this trap is
             sent once more with the non-error branchLoadStatus, and then
             stops being repeated."
        --#TYPE "Sentry: Branch Load Event."
        --#SUMMARY "Load Status of Branch '%s' (%s) is '%s'."
        --#ARGUMENTS { 2, 1, 6 }
        --#SEVERITY CRITICAL
        --#GENERIC 6
        --#CATEGORY "Error Events"
        --#SOURCE_ID "A"
        --#TIMEINDEX 255
        --#HELP ""
        --#HELPTAG 0
        --#STATE UNKNOWN
        ::= { events 15 }

END