path: root/MIBS/screenos/NETSCREEN-VPN-MON-MIB

-- This module defines enterprise MIBs for VPN tunnel monitoring
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-VPN-MON-MIB DEFINITIONS ::= BEGIN

IMPORTS
    netscreenVpn, netscreenVpnMibModule
        FROM NETSCREEN-SMI
    Counter32, Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE,
    TimeTicks
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenVpnMonMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor VPN
         tunnels"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311130000Z" -- November 13, 2003
    DESCRIPTION
        "Correct spelling mistake"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "no comment"
    REVISION      "200008270000Z" -- August 27, 2000
    DESCRIPTION
        "Creation Date"
    ::= { netscreenVpnMibModule 1 }

NsVpnMonEntry ::= SEQUENCE
{
    nsVpnMonIndex                Integer32,
    nsVpnMonInPlyId              Integer32,
    nsVpnMonOutPlyId             Integer32,
    nsVpnMonVpnName              DisplayString,
    nsVpnMonVsysName             DisplayString,
    nsVpnMonTunnelType           INTEGER,
    nsVpnMonEspEncAlg            INTEGER,
    nsVpnMonEspAuthAlg           INTEGER,
    nsVpnMonAhAlg                INTEGER,
    nsVpnMonKeyType              INTEGER,
    nsVpnMonP1Auth               INTEGER,
    nsVpnMonVpnType              INTEGER,
    nsVpnMonRmtGwIp              IpAddress,
    nsVpnMonRmtGwId              DisplayString,
    nsVpnMonMyGwIp               IpAddress,
    nsVpnMonMyGwId               DisplayString,
    nsVpnMonOutSpi               Integer32,
    nsVpnMonInSpi                Integer32,
    nsVpnMonMonState             INTEGER,
    nsVpnMonTunnelState          INTEGER,
    nsVpnMonP1State              INTEGER,
    nsVpnMonP1LifeTime           Integer32,
    nsVpnMonP2State              INTEGER,
    nsVpnMonP2LifeTime           Integer32,
    nsVpnMonP2LifeBytes          Integer32,
    nsVpnMonDelayAvg             Integer32,
    nsVpnMonDelayLast            Integer32,
    nsVpnMonAvail                Integer32,
    nsVpnMonSaId                 Integer32,
    nsVpnMonGroupId              Integer32,
    nsVpnMonUsrId                Integer32,
    nsVpnMonStartSessRequestTime TimeTicks,
    nsVpnMonStartSessEstTime     TimeTicks,
    nsVpnMonEndSessTime          TimeTicks,
    nsVpnMonBytesIn              Counter32,
    nsVpnMonBytesOut             Counter32,
    nsVpnMonPacketsIn            Counter32,
    nsVpnMonPacketsOut           Counter32,
    nsVpnMonIfIndex              Integer32,
    nsVpnMonUpdateTime           TimeTicks,
    nsVpnMonDN                   DisplayString,
    nsVpnMonIfInfo               Integer32
}

netscreenVpnMon OBJECT IDENTIFIER ::= { netscreenVpn 1 }

nsVpnMonTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsVpnMonEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A list of active VPN tunnel entries."
    ::= { netscreenVpnMon 1 }

nsVpnMonEntry OBJECT-TYPE
    SYNTAX        NsVpnMonEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A VPN tunnel entry containing attributes for both IKE Phase 1
         and Phase 2 as well as associated policy"
    INDEX
        { nsVpnMonIndex }
    ::= { nsVpnMonTable 1 }

nsVpnMonIndex OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A unique value for each active VPN tunnel.  Its value ranges
         between 1 and 65535 and may not be contiguous.  Due to the
         dynamic nature of active VPN tunnels, the index  has no other
         meaning but a pure index"
    ::= { nsVpnMonEntry 1 }

nsVpnMonInPlyId OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The incoming policy ID for which this tunnel is created for.
         -1 means no policy associates with this SA."
    ::= { nsVpnMonEntry 2 }

nsVpnMonOutPlyId OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The outgoing policy ID for which this tunnel is created for.
         -1 means no policy associates with this SA."
    ::= { nsVpnMonEntry 3 }

nsVpnMonVpnName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A textual string contains information about the VPN entity
         from which this tunnel was derived."
    ::= { nsVpnMonEntry 4 }

nsVpnMonVsysName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A textual string contains the Virtual system to which this
         tunnel belongs."
    ::= { nsVpnMonEntry 5 }

nsVpnMonTunnelType OBJECT-TYPE
    SYNTAX        INTEGER {
        reserved(0),
        proto-isakmp(1),
        proto-ipsec-ah(2),
        proto-ipsec-esp(3),
        proto-ipcomp(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Protocol type used for the tunnel"
    ::= { nsVpnMonEntry 6 }

nsVpnMonEspEncAlg OBJECT-TYPE
    SYNTAX        INTEGER {
        reserved(0),
        esp-des-iv64(1),
        esp-des(2),
        esp-3des(3),
        esp-rc5(4),
        esp-idea(5),
        esp-cast(6),
        esp-blowfish(7),
        esp-3idea(8),
        esp-des-iv32(9),
        esp-rc4(10),
        esp-null(11),
        esp-aes(12),
		esp-aes192(20),
		esp-aes256(21)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "a value which identifies a particular algorithm to be used to
         provide secrecy protection for ESP."
    ::= { nsVpnMonEntry 7 }

nsVpnMonEspAuthAlg OBJECT-TYPE
    SYNTAX        INTEGER {
        reserved(0),
        hmac-md5(1),
        hmac-sha(2),
        des-mac(3),
        ipdk(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The ESP Authentication Algorithm used in the IPsec."
    ::= { nsVpnMonEntry 8 }

nsVpnMonAhAlg OBJECT-TYPE
    SYNTAX        INTEGER {
        reserved(0),
        ah-md5(2),
        ah-sha(3),
        ah-des(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "a value which identifies a particular algorithm to be used to
         provide integrity protection for AH."
    ::= { nsVpnMonEntry 9 }

nsVpnMonKeyType OBJECT-TYPE
    SYNTAX        INTEGER {
        manual(0),
        auto-ike(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "a value which identifies a key exchange protocol to be used
         for the negotiation"
    ::= { nsVpnMonEntry 10 }

nsVpnMonP1Auth OBJECT-TYPE
    SYNTAX        INTEGER {
        unused(0),
        preshared-key(1),
        dss-Signature(2),
        rsa-Signature(3),
        rsa-Encryption1(4),
        rsa-Encryption2(5)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "a value which identifies Phase 1 authentication method"
    ::= { nsVpnMonEntry 11 }

nsVpnMonVpnType OBJECT-TYPE
    SYNTAX        INTEGER {
        reserved(0),
        dialup(1),
        site-to-site(2)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The type of this VPN tunnel, either a dialup or site-to-site"
    ::= { nsVpnMonEntry 12 }

nsVpnMonRmtGwIp OBJECT-TYPE
    SYNTAX        IpAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The peer Gateway's IP address"
    ::= { nsVpnMonEntry 13 }

nsVpnMonRmtGwId OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The peer Gateway's ID"
    ::= { nsVpnMonEntry 14 }

nsVpnMonMyGwIp OBJECT-TYPE
    SYNTAX        IpAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The local Gateway's IP address"
    ::= { nsVpnMonEntry 15 }

nsVpnMonMyGwId OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The local Gateway's ID"
    ::= { nsVpnMonEntry 16 }

nsVpnMonOutSpi OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The SPI for outgoing packets"
    ::= { nsVpnMonEntry 17 }

nsVpnMonInSpi OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The SPI for incoming packets"
    ::= { nsVpnMonEntry 18 }

nsVpnMonMonState OBJECT-TYPE
    SYNTAX        INTEGER {
        off(0),
        on(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The monitoring status, if it is on, an icmp ping will be sent
         over the tunnel periodically to test the connectivity and
         latency"
    ::= { nsVpnMonEntry 19 }

nsVpnMonTunnelState OBJECT-TYPE
    SYNTAX        INTEGER {
        down(0),
        up(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The current tunnel status determined by the icmp ping  if The
         monitoring status is on."
    ::= { nsVpnMonEntry 20 }

nsVpnMonP1State OBJECT-TYPE
    SYNTAX        INTEGER {
        inactive(0),
        active(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The IKE's Phase 1 status"
    ::= { nsVpnMonEntry 21 }

nsVpnMonP1LifeTime OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "an active Phase 1 sa's time left before re-key. -1 means
         unlimited lifetime."
    ::= { nsVpnMonEntry 22 }

nsVpnMonP2State OBJECT-TYPE
    SYNTAX        INTEGER {
        inactive(0),
        active(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The IKE's Phase 2 status"
    ::= { nsVpnMonEntry 23 }

nsVpnMonP2LifeTime OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "an active Phase 2 sa's time left before re-key. -1 means
         unlimited life time."
    ::= { nsVpnMonEntry 24 }

nsVpnMonP2LifeBytes OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "an active Phase 2 sa's bytes left before re-key. -1 means
         unlimited life bytes."
    ::= { nsVpnMonEntry 25 }

nsVpnMonDelayAvg OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "a kind of rolling average of latency, in milliseconds. -1 has
         no meaning here, which means nsVpnMonDelayAvg  has not been
         calculated yet."
    ::= { nsVpnMonEntry 26 }

nsVpnMonDelayLast OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "latency in last sample, in milliseconds.
         -1 means either vpn tunnel is inactive or vpn tunnel monitor is
         not turned on."
    ::= { nsVpnMonEntry 27 }

nsVpnMonAvail OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "percentage over 30 samples"
    ::= { nsVpnMonEntry 28 }

nsVpnMonSaId OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "SA identifier, also used as table index"
    ::= { nsVpnMonEntry 29 }

nsVpnMonGroupId OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Group Identifier"
    ::= { nsVpnMonEntry 30 }

nsVpnMonUsrId OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "User Identifier"
    ::= { nsVpnMonEntry 31 }

nsVpnMonStartSessRequestTime OBJECT-TYPE
    SYNTAX        TimeTicks
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Start Session request timestamp"
    ::= { nsVpnMonEntry 32 }

nsVpnMonStartSessEstTime OBJECT-TYPE
    SYNTAX        TimeTicks
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Start Session establish timestamp"
    ::= { nsVpnMonEntry 33 }

nsVpnMonEndSessTime OBJECT-TYPE
    SYNTAX        TimeTicks
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "End Session timestamp [when session terminates]"
    ::= { nsVpnMonEntry 34 }

nsVpnMonBytesIn OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Incoming bytes through this sa."
    ::= { nsVpnMonEntry 35 }

nsVpnMonBytesOut OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Outgoing bytes through this sa."
    ::= { nsVpnMonEntry 36 }

nsVpnMonPacketsIn OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Incoming packets through this sa."
    ::= { nsVpnMonEntry 37 }

nsVpnMonPacketsOut OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Outgoing packets through this sa."
    ::= { nsVpnMonEntry 38 }

nsVpnMonIfIndex OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "interface index."
    ::= { nsVpnMonEntry 39 }

nsVpnMonUpdateTime OBJECT-TYPE
    SYNTAX        TimeTicks
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Timestamp [Whenever any member of the row gets updated, the
         timestamp is updated]"
    ::= { nsVpnMonEntry 40 }

nsVpnMonDN OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..64))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "DN name"
    ::= { nsVpnMonEntry 41 }

nsVpnMonIfInfo OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Internal id assigned to this interface. Stays persistent across resets."
    ::= { nsVpnMonEntry 42 }

END