path: root/MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB

ALCATEL-IND1-PIM-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,
    NOTIFICATION-TYPE,
	IpAddress, Integer32, TimeTicks,
	Unsigned32, Counter32
		FROM SNMPv2-SMI
    InetAddressType, InetAddress,
    InetAddressPrefixLength
        FROM INET-ADDRESS-MIB
	pimInterfaceEntry
		FROM PIM-STD-MIB
	RowStatus, TruthValue
		FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
    	FROM SNMPv2-CONF
	routingIND1Pim
		FROM ALCATEL-IND1-BASE;

alcatelIND1PIMMIB MODULE-IDENTITY

    LAST-UPDATED  "201505280000Z"
    ORGANIZATION  "Alcatel-Lucent"
    CONTACT-INFO
        "Please consult with Customer Service to ensure the most appropriate
         version of this document is used with the products in question:

                    Alcatel-Lucent, Enterprise Solutions Division
                   (Formerly Alcatel Internetworking, Incorporated)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America

        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507

        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):

             This proprietary MIB contains management information for 
             the configuration of PIM-SM and PIM-DM global configuration 
             parameters.

         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.

         No liability shall be assumed for any incidental, indirect, special, or
         consequential damages whatsoever arising from or related to this
         document or the information contained herein.

         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.

                     Copyright (C) 1995-2007 Alcatel-Lucent
                     Copyright (C) 2015 ALE USA, Inc.
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200704030000Z"
    DESCRIPTION
        "The latest version of this MIB Module."
    REVISION      "201505280000Z"
    DESCRIPTION
        "Added V4/V6 bidir ssm compatibility, bidir fast-join, asm fast-join and ssm-fast-join."

    ::= { routingIND1Pim 1 }

alcatelIND1PIMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 1 }

alaPimsmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 1 }
alaPimdmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 2 }
alaPimGlobalConfig   OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 3 }

-- ************************************************************************
--  PIM-SM Global Configuration
-- ************************************************************************

alaPimsmAdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-SM protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 1}

alaPimsmMaxRPs    OBJECT-TYPE
    SYNTAX     Integer32 (1..100)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "The maximum number of C-RPs allowed in the PIM-SM
                domain."
    DEFVAL     { 32 }
    ::= { alaPimsmGlobalConfig 2 }

alaPimsmProbeTime OBJECT-TYPE
    SYNTAX     Integer32 (1..300)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "When NULL Registers are used, this is the time
                between sending a NULL Register and the Register-
                Suppression-Timer expiring unless it is restarted
                by receiving a Register-Stop."
    DEFVAL     { 5 }
    ::= { alaPimsmGlobalConfig 3}

alaPimsmOldRegisterMessageSupport    OBJECT-TYPE
    SYNTAX      INTEGER {
                    header(1),
                    full(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
               "Specifies the application of the checksum function on
                received Register messages in the PIM-SM domain.  When
                set to full(2), the checksum for a register message
                is computed for the entire packet (i.e. includes data).
                When set to header(1), the checksum is done only on the
                first 8 bytes of the packet.  This variable is provided
                for interoperability reasons and may be required for
                Compatibility with older implementations of PIM-SM v2.
                This parameter must be set the same throughout the
                PIM-SM domain."
    DEFVAL     { header }
    ::= { alaPimsmGlobalConfig 4 }

alaPimsmAdminSPTConfig     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables SPT Switchover
                upon receiving the first data packet."
    DEFVAL     { enable }
    ::= {alaPimsmGlobalConfig 5 }

alaPimsmRPThreshold     OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the RP threshold value (in bps) to be used
                in determining when to switch to native
                forwarding at the RP.  The value of 0
                disables the RP Threshold functionality."
    DEFVAL     { 1 }
    ::= {alaPimsmGlobalConfig 6 }

alaPimsmV6AdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-SM IPv6 protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 7 }

alaPimsmV6SPTConfig     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables PIM IPv6 SPT Switchover
                upon receiving the first data packet."
    DEFVAL     { enable }
    ::= {alaPimsmGlobalConfig 8 }

alaPimsmV6RPSwitchover     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether PIM IPv6
                will attempt to switch to native forwarding at the RP
                upon receiving the first register-encapsulated packet."
    DEFVAL     { enable }
    ::= {alaPimsmGlobalConfig 9 }

alaPimsmBidirStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM BIDIR protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 10}

alaPimsmBidirPeriodicInterval    OBJECT-TYPE
    SYNTAX     Integer32 (0..2000)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "This is the interval at which the DF for each RPA
                will periodically announce its status in a
                Winner message.

                A value of 0 indicates that periodic messages will
                not be sent."
    DEFVAL     { 60 }
    ::= { alaPimsmGlobalConfig 11 }

alaPimsmBidirDFAbort     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether the DF 
                election will be automatically aborted if a PIM hello 
                is received from a PIM neighbor without the 
                bidirectional capable option.  By default, the DF 
                election will still occur among those PIM routers that 
                support BIDIR.  By enabling this option, if a BIDIR-
                capable router receives a PIM hello from a 
                non-BIDIR-capable router, the DF election is aborted."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 12}


alaPimsmNonBidirHelloPeriod OBJECT-TYPE
    SYNTAX     Unsigned32 (10..65535)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "The minimum time that must elapse between
            alaPimNonBidirHello notifications originated by this router.
            The default value of 65535 represents an 'infinite' time, in
            which case, no alaPimNonBidirHello notifications are ever
            sent.

            The non-zero minimum allowed value provides resilience
            against propagation of denial-of-service attacks from the
            control plane to the network management plane."
    DEFVAL { 65535 }
    ::= { alaPimsmGlobalConfig 13 }

alaPimsmNonBidirHelloMsgsRcvd OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of PIM Hello messages that have been
            received by a BIDIR-capable device that do not have the
            Bidirectional Capable option.

            This counter is incremented if BIDIR mode is enabled on
            this router and a PIM Hello message is received from a
            PIM neighbor that does not include the Bidirectional Capable
            option. 

            By default, the reception of these messages will not 
            effect the BIDIR DF election.  The alaPimsmBidirDFAbort 
            object may be used to change the default behavior
            and have the DF election aborted whenever a BIDIR-capable
            router receives a PIM hello from a non-BIDIR-capable
            router."
    ::= { alaPimsmGlobalConfig 14 }

alaPimsmNonBidirHelloAddressType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The address type stored in alaPimsmNonBidirHelloOrigin.

            If no Non Bidir Hello messages have been received, this
            object is set to unknown(0)."
    ::= { alaPimsmGlobalConfig 15 }

alaPimsmNonBidirHelloOrigin OBJECT-TYPE
    SYNTAX     InetAddress (SIZE (0|4|8|16|20))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The source address of the last Non Bidir Hello message
            received by this device."
    ::= { alaPimsmGlobalConfig 16 }

alaPimsmV6BidirStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM IPv6 BIDIR protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 17}

alaPimsmRPHashStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables applying the PIM hash function
                defined in RFC 4601 when selecting an RP from two or more equal
                group-range-to-RP mappings."
    REFERENCE "RFC 4601 section 4.7.2"
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 18 }

alaPimsmBidirSsmCompat     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether PIM
                BIDIR will support receiving IGMPv3 source-specific
                joins and treat them as a (*,G) join.
                By default, IGMPv3 source-specific joins are ignored
                when PIM is operating in BIDIR mode."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 19}

alaPimsmV6BidirSsmCompat     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether IPv6 PIM
                BIDIR will support receiving MLDv2 source-specific
                joins and treat them as a (*,G) join.
                By default, MLDv2 source-specific joins are ignored
                when PIM is operating in BIDIR mode."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 20}

alaPimsmBidirFastJoin     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether PIM
                BIDIR will automatically create the routes in hardware
                as soon as the BIDIR (*,G) routes are learned.
                By default, this is disabled and the routes are not
                installed in hardware until the multicast traffic
                reaches the switch."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 21}

alaPimsmV6BidirFastJoin     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether IPv6 PIM
                BIDIR will automatically create the routes in hardware
                as soon as the BIDIR (*,G) routes are learned.
                By default, this is disabled and the routes are not
                installed in hardware until the multicast traffic
                reaches the switch."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 22}

alaPimsmAsmFastJoin     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether PIM
                ASM will automatically create the (*,G) routes in
                hardware as soon as the ASM (*,G) routes are learned.
                By default, this is disabled and the routes are not
                installed in hardware until the multicast traffic
                reaches the switch."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 23}

alaPimsmV6AsmFastJoin     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether IPv6 PIM
                ASM will automatically create the (*,G) routes in 
                hardware as soon as the ASM (*,G) routes are learned.
                By default, this is disabled and the routes are not
                installed in hardware until the multicast traffic
                reaches the switch."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 24}

alaPimsmSsmFastJoin     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether PIM 
                will automatically create the (S,G) routes in 
                hardware as soon as the (S,G) routes are learned.
                This includes PIM Sparse Mode (S,G) routes as well
                as PIM SSM (S,G) routes.
                By default, this is disabled and the routes are not
                installed in hardware until the multicast traffic
                reaches the switch."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 25}

alaPimsmV6SsmFastJoin     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables whether IPv6 PIM
                will automatically create the (S,G) routes in hardware
                as soon as the (S,G) routes are learned.
                This includes PIM Sparse Mode (S,G) routes as well
                as PIM SSM (S,G) routes.
                By default, this is disabled and the routes are not
                installed in hardware until the multicast traffic
                reaches the switch."
    DEFVAL     { disable }
    ::= {alaPimsmGlobalConfig 26}


-- ************************************************************************
--  PIM-DM Global Configuration
-- ************************************************************************

alaPimdmAdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-DM protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimdmGlobalConfig 1}

alaPimdmStateRefreshTimeToLive OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "The TTL to be used by this router's originated State
                 Refresh messages if the data packet's TTL is not
                 recorded."
    DEFVAL { 16 }
    ::= {alaPimdmGlobalConfig 2}

alaPimdmStateRefreshLimitInterval OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION "This router will not forward successive State Refresh
                 messages received at less than this interval."
    DEFVAL { 0 }
    ::= {alaPimdmGlobalConfig 3}

alaPimdmV6AdminStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables the
                PIM-DM IPv6 protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimdmGlobalConfig 4}

--
-- The PIM Dense Group Table
-- This table allows the configuration of pim group mappings to be
-- used with dense mode.  These mappings correspond to the sparse 
-- mappings defined in the pimStaticRPTable defined in the PIM-STD-MIB.
--

alaPimdmDenseGroupTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF AlaPimdmDenseGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "This table is used to manage configuration of dense groups.

            If the group prefixes configured for two or more rows in
            this table overlap, the row with the greatest value of
            alaPimdmDenseGroupGrpPrefixLength is used for the overlapping
            range."
    ::= { alaPimdmGlobalConfig 5 }

alaPimdmDenseGroupEntry OBJECT-TYPE
    SYNTAX     AlaPimdmDenseGroupEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry (conceptual row) in the alaPimdmDenseGroupTable.  This
            entry is preserved on agent restart."
    INDEX      { alaPimdmDenseGroupAddressType,
                 alaPimdmDenseGroupGrpAddress,
                 alaPimdmDenseGroupGrpPrefixLength }
    ::= { alaPimdmDenseGroupTable 1 }

AlaPimdmDenseGroupEntry ::= SEQUENCE {
    alaPimdmDenseGroupAddressType      InetAddressType,
    alaPimdmDenseGroupGrpAddress       InetAddress,
    alaPimdmDenseGroupGrpPrefixLength  InetAddressPrefixLength,
    alaPimdmDenseGroupOverrideDynamic  TruthValue,
    alaPimdmDenseGroupPrecedence       Unsigned32,
    alaPimdmDenseGroupRowStatus        RowStatus
}

alaPimdmDenseGroupAddressType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The address type of this entry."
    ::= { alaPimdmDenseGroupEntry 1 }

alaPimdmDenseGroupGrpAddress OBJECT-TYPE
    SYNTAX     InetAddress (SIZE (4|8|16|20))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The multicast group address that, when combined with
            alaPimdmDenseGroupGrpPrefixLength, gives the group prefix for this
            entry.  The InetAddressType is given by the
            alaPimdmDenseGroupAddressType object.

            This address object is only significant up to
            alaPimdmDenseGroupGrpPrefixLength bits.  The remainder of the
            address bits are zero.  This is especially important for
            this index field, which is part of the index of this entry.
            Any non-zero bits would signify an entirely different
            entry."
    ::= { alaPimdmDenseGroupEntry 2 }

alaPimdmDenseGroupGrpPrefixLength OBJECT-TYPE
    SYNTAX     InetAddressPrefixLength (4..128)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The multicast group prefix length that, when combined
            with alaPimdmDenseGroupGrpAddress, gives the group prefix for this
            entry.  The InetAddressType is given by the
            alaPimdmDenseGroupAddressType object.  If alaPimdmDenseGroupAddressType is
            'ipv4' or 'ipv4z', this object must be in the range 4..32.
            If alaPimdmDenseGroupGrpAddressType is 'ipv6' or 'ipv6z', this
            object must be in the range 8..128."
    ::= { alaPimdmDenseGroupEntry 3 }

alaPimdmDenseGroupOverrideDynamic OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "Whether this dense group configuration will override other
            group mappings in this group prefix.  If this object is
            TRUE, then it will override:

            -  RP information learned dynamically for groups in this
            group prefix.

            -  RP information configured in alaPimdmDenseGroupTable with
            alaPimdmDenseGroupOverrideDynamic set to FALSE.

            See pimGroupMappingTable for details."
    DEFVAL { false }
    ::= { alaPimdmDenseGroupEntry 4 }

alaPimdmDenseGroupPrecedence OBJECT-TYPE
    SYNTAX     Unsigned32 (0..65535)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The value for pimGroupMappingPrecedence to be used for this
            static RP configuration.  This allows fine control over
            which configuration is overridden by this static
            configuration.

            If alaPimdmDenseGroupOverrideDynamic is set to TRUE, all dynamic RP
            configuration is overridden by this static configuration,
            whatever the value of this object.

            The absolute values of this object have a significance only
            on the local router and do not need to be coordinated with
            other routers.  A setting of this object may have different
            effects when applied to other routers.

            Do not use this object unless fine control of static RP
            behavior on the local router is required."
    ::= { alaPimdmDenseGroupEntry 5 }

alaPimdmDenseGroupRowStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The status of this row, by which rows in this table can
            be created and destroyed.

            All writeable objects in this entry can be modified when the
            status of this entry is active(1)."
    ::= { alaPimdmDenseGroupEntry 6 }


-- ************************************************************************
--  PIM Global Configuration
-- ************************************************************************

alaPimBfdStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables PIM
                with the BFD protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 1}

alaPimBfdAllInterfaceStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables BFD
                for all PIM interfaces on this router."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 2}

alaPimMoFRRStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables MoFRR
                (Multicast only Fast Re-Route) on this router."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 3}

alaPimMoFRRAllRouteStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "By default, MoFRR is only applied to multicast
                routes that have local clients.  Enabling 
                alaPimMoFRRAllRouteStatus will enable MoFRR
                on all routes whether there are local clients
                or not.  alaPimMoFRRStatus must be enabled for
                this to take effect."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 4}

-- ************************************************************************
-- Expansion of pimInterfaceEntry
-- ************************************************************************

alaPimInterfaceAugTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF AlaPimInterfaceAugEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
               "Expansion for pimInterfaceTable"
    ::= { alaPimGlobalConfig 5 }
  
alaPimInterfaceAugEntry OBJECT-TYPE
    SYNTAX     AlaPimInterfaceAugEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
               "An entry of alaPimInterfaceAugTable"
    AUGMENTS { pimInterfaceEntry }
    ::= { alaPimInterfaceAugTable 1 }
  
AlaPimInterfaceAugEntry ::= SEQUENCE {
    alaPimInterfaceBfdStatus INTEGER
}  
  
alaPimInterfaceBfdStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current     
    DESCRIPTION     
               "Enables/Disables BFD for particular interfaces of PIM."
    DEFVAL { disable }     
    ::= { alaPimInterfaceAugEntry 1 }

alaPimMbrAllSourcesStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables PIM to notify DVMRP about
                the routes to all multicast sources learned instead of just
                the directly connected subnets so that these routes can be
                advertised in the DVMRP domain via standard DVMRP mechanisms.
                This object is only applicable if the router is operating as 
                a Multicast Border Router."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 6}

alaPimMbrOperStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
               "Whether MBR is currently enabled/disabled for PIM."
    ::= {alaPimGlobalConfig 7}

alaPimV6BfdStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables PIM IPv6
                with the BFD protocol on this router."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 8}

alaPimV6BfdAllInterfaceStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables BFD
                for all PIM IPv6 interfaces on this router."
    DEFVAL     { disable }
    ::= {alaPimGlobalConfig 9}

-- ************************************************************************
--  PIM Notifications
-- ************************************************************************

alaPimNotifications OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 0 }

alaPimNonBidirHello NOTIFICATION-TYPE
    OBJECTS { alaPimsmNonBidirHelloAddressType,
              alaPimsmNonBidirHelloOrigin }
    STATUS      current
    DESCRIPTION
            "An alaPimNonBidirHello notification signifies that
            a bidir-capable router has received a PIM hello from 
            a non-bidir-capable router.

            This notification is generated whenever the counter
            alaPimsmNonBidirHelloMsgsRcvd is incremented, subject
            to the rate limit specified by
            alaPimsmNonBidirHelloNotificationPeriod."
    ::= { alaPimNotifications 1 }

-- conformance information

alcatelIND1PIMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 2 }
alcatelIND1PIMMIBCompliances OBJECT IDENTIFIER ::= 
                                          { alcatelIND1PIMMIBConformance 1 }
alcatelIND1PIMMIBGroups      OBJECT IDENTIFIER ::= 
                                          { alcatelIND1PIMMIBConformance 2 }


-- compliance statements

alaPimsmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running PIM Sparse
            Mode and implementing the ALCATEL-IND1-PIM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { alaPimsmConfigMIBGroup, alaPimConfigMIBGroup }

    ::= { alcatelIND1PIMMIBCompliances 1 }

alaPimdmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running PIM Dense
            Mode and implementing the ALCATEL-IND1-PIM MIB."
    MODULE  -- this module
    MANDATORY-GROUPS { alaPimdmConfigMIBGroup, alaPimConfigMIBGroup }

    ::= { alcatelIND1PIMMIBCompliances 2 }

-- units of conformance

alaPimsmConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaPimsmAdminStatus, alaPimsmMaxRPs,
              alaPimsmProbeTime, alaPimsmOldRegisterMessageSupport,
			  alaPimsmAdminSPTConfig, alaPimsmRPThreshold,
              alaPimsmV6AdminStatus, alaPimsmV6SPTConfig,
              alaPimsmV6RPSwitchover, alaPimsmBidirStatus,
              alaPimsmBidirPeriodicInterval, alaPimsmBidirDFAbort,
              alaPimsmNonBidirHelloPeriod, alaPimsmNonBidirHelloMsgsRcvd,
              alaPimsmV6BidirStatus, alaPimsmRPHashStatus,
              alaPimsmBidirSsmCompat, alaPimsmV6BidirSsmCompat,
              alaPimsmBidirFastJoin, alaPimsmV6BidirFastJoin,
              alaPimsmAsmFastJoin, alaPimsmV6AsmFastJoin,
              alaPimsmSsmFastJoin, alaPimsmV6SsmFastJoin
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of global
            configuration parameters of PIM Sparse Mode routers."
    ::= { alcatelIND1PIMMIBGroups 1 }

alaPimdmConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaPimdmAdminStatus, alaPimdmStateRefreshTimeToLive,
              alaPimdmStateRefreshLimitInterval,
              alaPimdmV6AdminStatus, alaPimdmDenseGroupOverrideDynamic,
              alaPimdmDenseGroupPrecedence, alaPimdmDenseGroupRowStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of global
            configuration parameters of PIM Dense Mode routers."
    ::= { alcatelIND1PIMMIBGroups 2 }

alaPimConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaPimBfdStatus, 
              alaPimBfdAllInterfaceStatus, 
              alaPimMoFRRStatus,
              alaPimMoFRRAllRouteStatus,
              alaPimInterfaceBfdStatus,
              alaPimMbrAllSourcesStatus,
              alaPimMbrOperStatus,
              alaPimV6BfdStatus,
              alaPimV6BfdAllInterfaceStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of global
            configuration parameters of PIM routers."
    ::= { alcatelIND1PIMMIBGroups 3 }

alaPimOptionalGroup OBJECT-GROUP
    OBJECTS { 
             alaPimsmNonBidirHelloAddressType,
             alaPimsmNonBidirHelloOrigin
            }
    STATUS  current
    DESCRIPTION
            " PIM objects to stop the tools from complaining "
    ::= { alcatelIND1PIMMIBGroups 4 }

alaPimNotificationGroup NOTIFICATION-GROUP
    NOTIFICATIONS { 
              alaPimNonBidirHello
            }
    STATUS  current
    DESCRIPTION
            " PIM Notification objects "
    ::= { alcatelIND1PIMMIBGroups 5 }

END