path: root/MIBS/nokia/aos7/ALCATEL-IND1-GVRP-MIB

ALCATEL-IND1-GVRP-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                Counter32, Integer32, Unsigned32, MODULE-IDENTITY,
                OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
                                                FROM SNMPv2-SMI
                VlanBitmap                      FROM ALCATEL-IND1-VLAN-STP-MIB
                InterfaceIndex          FROM IF-MIB
                MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
                                                FROM SNMPv2-CONF
                softentIND1Gvrp         FROM ALCATEL-IND1-BASE;


        alcatelIND1GVRPMIB MODULE-IDENTITY
                LAST-UPDATED "201005130000Z"
                ORGANIZATION "Alcatel - Architects Of An Internet World"
                CONTACT-INFO
            "Please consult with Customer Service to insure the most appropriate
             version of this document is used with the products in question:

                 Alcatel-Lucent, Enterprise Solutions Division
                (Formerly Alcatel Internetworking, Incorporated)
                               26801 West Agoura Road
                            Agoura Hills, CA  91301-5122
                              United States Of America

            Telephone:               North America  +1 800 995 2696
                                     Latin America  +1 877 919 9526
                                     Europe         +31 23 556 0100
                                     Asia           +65 394 7933
                                     All Other      +1 818 878 4507

            Electronic Mail:         support@ind.alcatel.com
            World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
            File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

                DESCRIPTION
                        "This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):

                 For the Birds Of Prey Product Line
                 GVRP for the distribution of VLAN configuration information.


             The right to make changes in specification and other information
             contained in this document without prior notice is reserved.

             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.

               Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"

        REVISION      "201005130000Z"
        DESCRIPTION
            "Fixed the Notifications to use MIB Module OID.0 as Notifications root."

        REVISION      "200707020000Z"
        DESCRIPTION
                "The GVRP MIB defines a set of GVRP related management objects for VLANs
                and ports that support GARP VLAN registration protocol (GVRP). GVRP as a
                protocol provides mechanisms to dynamically learn and further propagate VLAN
                membership information across a bridged network, as recommended in standards
                IEEE Draft Std. P802.1Q-REV/D5.0 and 802.1D 2004 Editions.

                This GVRP MIB extends already existing AOS-REUSE IETF_Q_BRIDGE MIB which is based on
                RFC 2674 (Bridges with Traffic Classes, Multicast Filtering and Virtual LAN
                Extensions), to accomodate the proprietary behavior of the device and for
                defining objects as recommended by standards.

                This MIB comprises proprietary managed objects as well the objects required
                for conforming to the standards. However, the set of objects defined in this MIB,
                do not duplicate, nor conflict with any MIB object definitions defined in the
                IETF_Q_MIB."
                ::= { softentIND1Gvrp 1}

-- --------------------------------------------------------------

        alcatelIND1GVRPMIBNotifications OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For GVRP MIB Subsystem Notifications."
        ::= { alcatelIND1GVRPMIB 0 }

        alcatelIND1GVRPMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For GVRP
            Subsystem Managed Objects."
        ::= { alcatelIND1GVRPMIB 1 }

        alcatelIND1GVRPMIBConformance OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for GVRP Module MIB Subsystem Conformance Information."
        ::= { alcatelIND1GVRPMIB 2 }

        alcatelIND1GVRPMIBGroups OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for GVRP Module MIB Subsystem Units of Conformance."
        ::= { alcatelIND1GVRPMIBConformance 1 }

        alcatelIND1GVRPMIBCompliances OBJECT-IDENTITY
        STATUS  current
        DESCRIPTION
            "Branch for GVRP Module MIB Subsystem Compliance Statements."
        ::= { alcatelIND1GVRPMIBConformance 2 }

-- --------------------------------------------------------------

-- --------------------------------------------------------------
-- GVRP MIB
-- --------------------------------------------------------------

        alaGvrpGlobalClearStats         OBJECT-TYPE
                SYNTAX          INTEGER {
                                default(0),
                                reset(1)
                                }
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Defines the global clear statistics control for GVRP.
                        The value reset (1) indicates that GVRP should clear all statistic
                        counters related to all ports in the system. By default, this object
                        contains a zero value."
                DEFVAL  { default }
                ::= { alcatelIND1GVRPMIBObjects 1 }

        alaGvrpTransparentSwitching             OBJECT-TYPE
                SYNTAX          INTEGER {
                                enabled(1),
                                disabled(2)
                                }
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Defines the behavior when GVRP is globally disabled on a device.
                        The value enabled (1) indicates that device behaves like a GVRP
                        transparent device and the GVRP frames will be flooded transparently.
                        Value disabled (2) disabled indicates that the device will not flood
                        GVRP frames and will simply discard the received GVRP frames."
                DEFVAL  { disabled }
                ::= { alcatelIND1GVRPMIBObjects 2 }

        alaGvrpMaxVlanLimit             OBJECT-TYPE
                SYNTAX          Integer32  (32 .. 4094)
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Defines the maximum number of dynamic VLANs that can be created on the system by GVRP.
                        If the number of VLANs created by GVRP reaches this limit, the system will gradually
                        prevent GVRP from creating additional VLANs."
                DEFVAL  { 256 }
                ::= { alcatelIND1GVRPMIBObjects 3 }


-- -------------------------------------------------------------
-- GVRP Port Config Table
-- -------------------------------------------------------------

--      DESCRIPTION:
--                      "Port configuration information
--                       data for the GVRP Module.
--                       Implementation of this group is mandantory"



        gvrpPortConfig  OBJECT IDENTIFIER ::= { alcatelIND1GVRPMIBObjects 4 }


        alaGvrpPortConfigTable  OBJECT-TYPE
            SYNTAX  SEQUENCE OF AlaGvrpPortConfigEntry
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                "A table containing GVRP port configuration information."
            ::= { gvrpPortConfig 1 }

        alaGvrpPortConfigEntry  OBJECT-TYPE
            SYNTAX  AlaGvrpPortConfigEntry
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                "A GVRP port configuration entry."
            INDEX { alaGvrpPortConfigIfIndex }
            ::= { alaGvrpPortConfigTable 1 }

        AlaGvrpPortConfigEntry ::= SEQUENCE {
            alaGvrpPortConfigIfIndex    InterfaceIndex,
            alaGvrpPortConfigRegistrarMode      INTEGER,
            alaGvrpPortConfigApplicantMode      INTEGER,
            alaGvrpPortConfigRestrictedRegistrationBitmap   VlanBitmap,
            alaGvrpPortConfigAllowRegistrationBitmap   VlanBitmap,
            alaGvrpPortConfigRegistrationBitmap   VlanBitmap,
            alaGvrpPortConfigRestrictedApplicantBitmap VlanBitmap,
            alaGvrpPortConfigAllowApplicantBitmap VlanBitmap,
            alaGvrpPortConfigApplicantBitmap VlanBitmap,
            alaGvrpPortConfigRegistrationToStaticVlanLearn   VlanBitmap,
            alaGvrpPortConfigRegistrationToStaticVlanRestrict   VlanBitmap,
            alaGvrpPortConfigRegistrationToStaticVlan   VlanBitmap,
            alaGvrpPortConfigJoinTimer  Unsigned32,
            alaGvrpPortConfigLeaveTimer Unsigned32,
            alaGvrpPortConfigLeaveAllTimer Unsigned32,
            alaGvrpPortConfigProviderBpduMac INTEGER
            }

            alaGvrpPortConfigIfIndex  OBJECT-TYPE
            SYNTAX  InterfaceIndex
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                 "The ifindex of the port on which GVRP is running"
            ::= { alaGvrpPortConfigEntry 1 }

            alaGvrpPortConfigRegistrarMode  OBJECT-TYPE
                SYNTAX  INTEGER {
                        normal(1),
                        fixed(2),
                        forbidden(3)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "Defines the mode of operation of all the registrar state machines associated to the port.
                normal - registration as well as de-registration of VLANs are allowed.
                fixed  - A VLAN that was previously mapped onto such a port either dynamically or
                statically cannot be de-registered through GVRP.  When the port registration mode is set to fixed,
                VLAN(s) can only be mapped onto such port statically.
                forbidden - dynamic VLAN registration or de-registration are not allowed on the port.

                NOTE: The registrar state machines for the default VLAN will operate in Fixed Registration Mode
                for all the ports on the switch."
                DEFVAL  { normal }
                ::= { alaGvrpPortConfigEntry 2 }


            alaGvrpPortConfigApplicantMode  OBJECT-TYPE
                SYNTAX  INTEGER {
                        participant (1),
                        nonparticipant (2),
                        active (3)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "Defines the mode of operation of all the applicant state machines associated to the port.
                participant - The state machines participates normally  in GVRP protocol exchanges.
                non_participant - The state machines does not send any GVRP PDU(s).
                active - The state machines send GVRP frames even on ports that are in blocking state on
                the active spanning tree instance."
                DEFVAL  { participant }
                ::= { alaGvrpPortConfigEntry 3 }


            alaGvrpPortConfigRestrictedRegistrationBitmap OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the restricted registration control
                for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in
                the system based on GVRP processing or only mapped to ports in case they have already been
                statically created in the system. The bitmap will only affect the GVRP processing if the
                Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set
                normal registration (1). Each bit defines:
                0= false, dynamic VLAN registration is not restricted
                1= true, VLAN cannot be created in the system by GVRP processing.
                However, if this VLAN already exists in the system as a static VLAN,
                then it can be mapped to the receiving port"
                ::= { alaGvrpPortConfigEntry 4 }

            alaGvrpPortConfigAllowRegistrationBitmap OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the restricted registration control
                for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in
                the system based on GVRP processing or only mapped to ports in case they have already been
                statically created in the system. The bitmap will only affect the GVRP processing if the
                Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set
                normal registration (1). Each bit defines:
                0= false, VLAN cannot be created in the system by GVRP processing.
                1= true, dynamic VLAN registration is allowed
                However, if this VLAN already exists in the system as a static VLAN,
                then it can be mapped to the receiving port"
                ::= { alaGvrpPortConfigEntry 5 }

            alaGvrpPortConfigRegistrationBitmap OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-only
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the restricted registration control
                for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in
                the system based on GVRP processing or only mapped to ports in case they have already been
                statically created in the system. The bitmap will only affect the GVRP processing if the
                Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set
                normal registration (1). Each bit defines:
                0= false, dynamic VLAN registration is not restricted
                1= true, VLAN cannot be created in the system by GVRP processing.
                However, if this VLAN already exists in the system as a static VLAN,
                then it can be mapped to the receiving port"
                ::= { alaGvrpPortConfigEntry 6 }

            alaGvrpPortConfigRestrictedApplicantBitmap OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the restricted applicant control
                for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in
                the system based on GVRP processing. The bitmap will only affect the GVRP processing if the
                Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set
                participant(1) or active (3). Each bit defines:
                0= false, VLAN propagation is not restricted
                1= true, VLAN cannot be propagated in the system by GVRP processing."
                ::= { alaGvrpPortConfigEntry 7 }

            alaGvrpPortConfigAllowApplicantBitmap OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the restricted applicant control
                for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in
                the system based on GVRP processing. The bitmap will only affect the GVRP processing if the
                Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set
                participant(1) or active (3). Each bit defines:
                0= false, VLAN cannot be propagated in the system by GVRP processing
                1= true, VLAN propagation is allowed."
                ::= { alaGvrpPortConfigEntry 8 }

            alaGvrpPortConfigApplicantBitmap OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-only
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the restricted applicant control
                for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in
                the system based on GVRP processing. The bitmap will only affect the GVRP processing if the
                Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set
                participant(1) or active (3). Each bit defines:
                0= false, VLAN propagation is not restricted
                1= true, VLAN cannot be propagated in the system by GVRP processing."
                ::= { alaGvrpPortConfigEntry 9 }

            alaGvrpPortConfigRegistrationToStaticVlanLearn OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the registration to static VLAN control
                for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically
                configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if
                the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to
                normal registration (1). Each bit defines:
                0= restrict, port is not allowed to become member of VLAN.
                1= learn, port is allowed to become member of corresponding VLAN"
                ::= { alaGvrpPortConfigEntry 10 }

            alaGvrpPortConfigRegistrationToStaticVlanRestrict OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the registration to static VLAN control
                for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically
                configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if
                the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to
                normal registration (1). Each bit defines:
                0= learn, port is allowed to become member of corresponding VLAN
                1= restrict, port is not allowed to become member of VLAN."
                ::= { alaGvrpPortConfigEntry 11 }

            alaGvrpPortConfigRegistrationToStaticVlan OBJECT-TYPE
                SYNTAX  VlanBitmap
                MAX-ACCESS  read-only
                STATUS  current
                DESCRIPTION
                "An octet string of 4096 bits that defines the status of the registration to static VLAN control
                for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically
                configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if
                the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to
                normal registration (1). Each bit defines:
                0= learn, port is allowed to become member of corresponding VLAN
                1= restrict, port is not allowed to become member of VLAN."
                ::= { alaGvrpPortConfigEntry 12 }

           alaGvrpPortConfigJoinTimer  OBJECT-TYPE
                SYNTAX  Unsigned32  (1 .. 2147483647)
                UNITS "milliseconds"
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "Maximum period of time that a GVRP instance waits before making declarations for VLANs."
                DEFVAL  { 600 }
                ::= { alaGvrpPortConfigEntry 13 }


          alaGvrpPortConfigLeaveTimer OBJECT-TYPE
                SYNTAX  Unsigned32  (3 .. 2147483647)
                UNITS "milliseconds"
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "Period of time that a registrar state machine of a GVRP instance waits, after receiving
                a leave message on a port for a particular VLAN, to remove the registration of that VLAN
                on the port.
                The value for the Leave Timer must be greater than three times the value for the Join
                timer, i.e. Leave >= Join*3."
                DEFVAL  { 1800 }
                ::= { alaGvrpPortConfigEntry 14 }

            alaGvrpPortConfigLeaveAllTimer OBJECT-TYPE
                SYNTAX  Unsigned32  (3 .. 2147483647)
                UNITS "milliseconds"
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "Interval at which the Leave All state machine of a GVRP instance generates Leave All
                messages. A Leave All message instructs GVRP to modify the state of all VLANs registered
                on a port to Leaving.
                The value for the LeaveAll Timer must be greater than the value for the Leave
                timer, i.e. LeaveAll >= Leave."
                DEFVAL  { 30000  }

                ::= { alaGvrpPortConfigEntry 15 }

            alaGvrpPortConfigProviderBpduMac OBJECT-TYPE
                SYNTAX INTEGER
                {
                        enable (1),
                        disable (2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                "Describes the treatment of gvrp frames ingressing on a gvrp enabled Vlan stacking network
                ports.If disabled provider gvrp frames with provider group address are processed on the
                port and if enabled provider gvrp frames with customer group address are processed on
                gvrp enabled vlan stacking network port."

                ::= { alaGvrpPortConfigEntry 16 }

-- -------------------------------------------------------------


-- -------------------------------------------------------------
-- GVRP Port Statistics Table
-- -------------------------------------------------------------

--      DESCRIPTION:
--                      "Port statistics information
--                       for the GVRP Module.
--                       Implementation of this group is mandantory"


        gvrpPortStats  OBJECT IDENTIFIER ::= { alcatelIND1GVRPMIBObjects 5 }


        alaGvrpPortStatsTable  OBJECT-TYPE
            SYNTAX  SEQUENCE OF AlaGvrpPortStatsEntry
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                "A table containing GVRP port statistics information."
            ::= { gvrpPortStats 1 }

        alaGvrpPortStatsEntry  OBJECT-TYPE
            SYNTAX  AlaGvrpPortStatsEntry
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                "A GVRP port statistics entry."
            INDEX { alaGvrpPortStatsIfIndex }
            ::= { alaGvrpPortStatsTable 1 }

        AlaGvrpPortStatsEntry ::= SEQUENCE {
                alaGvrpPortStatsIfIndex InterfaceIndex,
                alaGvrpPortStatsJoinEmptyReceived Counter32,
                alaGvrpPortStatsJoinInReceived Counter32,
                alaGvrpPortStatsEmptyReceived Counter32,
                alaGvrpPortStatsLeaveInReceived Counter32,
                alaGvrpPortStatsLeaveEmptyReceived Counter32,
                alaGvrpPortStatsLeaveAllReceived Counter32,
                alaGvrpPortStatsJoinEmptyTransmitted Counter32,
                alaGvrpPortStatsJoinInTransmitted Counter32,
                alaGvrpPortStatsEmptyTransmitted Counter32,
                alaGvrpPortStatsLeaveInTransmitted Counter32,
                alaGvrpPortStatsLeaveEmptyTransmitted Counter32,
                alaGvrpPortStatsLeaveAllTransmitted Counter32,
                alaGvrpPortStatsTotalPDUReceived Counter32,
                alaGvrpPortStatsTotalPDUTransmitted Counter32,
                alaGvrpPortStatsTotalMsgsReceived Counter32,
                alaGvrpPortStatsTotalMsgsTransmitted Counter32,
                alaGvrpPortStatsInvalidMsgsReceived Counter32,
                alaGvrpPortStatsClearStats INTEGER

            }

        alaGvrpPortStatsIfIndex  OBJECT-TYPE
            SYNTAX  InterfaceIndex
            MAX-ACCESS  not-accessible
            STATUS  current
            DESCRIPTION
                 "The ifindex of the port on which GVRP is running"
            ::= { alaGvrpPortStatsEntry 1 }


        alaGvrpPortStatsJoinEmptyReceived OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Join Empty messages received."
            ::= { alaGvrpPortStatsEntry 2}


        alaGvrpPortStatsJoinInReceived  OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Join In messages received."
            ::= { alaGvrpPortStatsEntry 3}


          alaGvrpPortStatsEmptyReceived OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Empty messages received."
            ::= { alaGvrpPortStatsEntry 4}


          alaGvrpPortStatsLeaveInReceived       OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Leave In messages received."
            ::= { alaGvrpPortStatsEntry 5}


          alaGvrpPortStatsLeaveEmptyReceived    OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Leave Empty messages received."
            ::= { alaGvrpPortStatsEntry 6}


          alaGvrpPortStatsLeaveAllReceived      OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Leave all messages received."
            ::= { alaGvrpPortStatsEntry 7}


          alaGvrpPortStatsJoinEmptyTransmitted  OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Join Empty messages transmitted."
            ::= { alaGvrpPortStatsEntry 8}


          alaGvrpPortStatsJoinInTransmitted     OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Join In messages transmitted."
            ::= { alaGvrpPortStatsEntry 9}


          alaGvrpPortStatsEmptyTransmitted      OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Empty messages transmitted."
            ::= { alaGvrpPortStatsEntry 10}


          alaGvrpPortStatsLeaveInTransmitted    OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Leave In messages transmitted."
            ::= { alaGvrpPortStatsEntry 11}


          alaGvrpPortStatsLeaveEmptyTransmitted OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Leave Empty messages transmitted."
            ::= { alaGvrpPortStatsEntry 12}


          alaGvrpPortStatsLeaveAllTransmitted   OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Leaveall messages transmitted."
            ::= { alaGvrpPortStatsEntry 13}


          alaGvrpPortStatsTotalPDUReceived      OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The total number of GVRP PDUs received."
            ::= { alaGvrpPortStatsEntry 14}


          alaGvrpPortStatsTotalPDUTransmitted   OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The total number of GVRP PDUs transmitted."
            ::= { alaGvrpPortStatsEntry 15}

          alaGvrpPortStatsTotalMsgsReceived     OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The total number of GVRP messages received."
            ::= { alaGvrpPortStatsEntry 16}


          alaGvrpPortStatsTotalMsgsTransmitted  OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The total number of GVRP messages transmitted."
            ::= { alaGvrpPortStatsEntry 17}

          alaGvrpPortStatsInvalidMsgsReceived OBJECT-TYPE
              SYNTAX  Counter32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                      "The number of Invalid messages received."
            ::= { alaGvrpPortStatsEntry 18}

          alaGvrpPortStatsClearStats    OBJECT-TYPE
              SYNTAX            INTEGER {
                                default(0),
                                reset(1)
                                }
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Reset all statistics parameters corresponding to this port.
                         By default, this objects contains a zero value."
                DEFVAL  { default }
            ::= { alaGvrpPortStatsEntry 19}

-- --------------------------------------------------------------
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever dynamically learnt vlans by gvrp across system reaches the defined limit
-- and when dynamically learnt vlans by gvrp at each NI reaches a defined limit.
-- --------------------------------------------------------------

          gvrpVlanLimitReachedEvent NOTIFICATION-TYPE
          OBJECTS  {
                      alaGvrpMaxVlanLimit }
          STATUS   current
          DESCRIPTION
                "The number of vlans learnt dynamically by GVRP has
                reached a configured limit. Notify the management
                entity with number of vlans learnt dynamically by
                GVRP and the configured GVRP vlan limit."
          ::= { alcatelIND1GVRPMIBNotifications 1 }

-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1GVRPMIBCompliance MODULE-COMPLIANCE
   STATUS    current
   DESCRIPTION
        "Compliance statement for GVRP."
   MODULE
        MANDATORY-GROUPS
        {
                gvrpPortBaseGroup,
                gvrpPortConfigGroup,
                gvrpPortStatsGroup,
                gvrpNotificationGroup
        }
   ::= { alcatelIND1GVRPMIBCompliances 1 }

-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------

gvrpPortBaseGroup   OBJECT-GROUP
OBJECTS
{
    alaGvrpGlobalClearStats,
    alaGvrpTransparentSwitching,
    alaGvrpMaxVlanLimit
}
  STATUS  current
  DESCRIPTION
  "Collection of objects for management of GVRP Base Group."
  ::= { alcatelIND1GVRPMIBGroups 1 }

gvrpPortConfigGroup OBJECT-GROUP
   OBJECTS
   {
        alaGvrpPortConfigRegistrarMode,
        alaGvrpPortConfigApplicantMode,
        alaGvrpPortConfigRestrictedRegistrationBitmap,
        alaGvrpPortConfigAllowRegistrationBitmap,
        alaGvrpPortConfigRegistrationBitmap,
        alaGvrpPortConfigRestrictedApplicantBitmap,
        alaGvrpPortConfigAllowApplicantBitmap,
        alaGvrpPortConfigApplicantBitmap,
        alaGvrpPortConfigRegistrationToStaticVlanLearn,
        alaGvrpPortConfigRegistrationToStaticVlanRestrict,
        alaGvrpPortConfigRegistrationToStaticVlan,
        alaGvrpPortConfigJoinTimer,
        alaGvrpPortConfigLeaveTimer,
        alaGvrpPortConfigLeaveAllTimer,
        alaGvrpPortConfigProviderBpduMac
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of GVRP Port Configuration Table."
   ::= { alcatelIND1GVRPMIBGroups 2 }


gvrpPortStatsGroup OBJECT-GROUP
   OBJECTS
   {
        alaGvrpPortStatsJoinEmptyReceived,
        alaGvrpPortStatsJoinInReceived,
        alaGvrpPortStatsEmptyReceived,
        alaGvrpPortStatsLeaveInReceived,
        alaGvrpPortStatsLeaveEmptyReceived,
        alaGvrpPortStatsLeaveAllReceived,
        alaGvrpPortStatsJoinEmptyTransmitted,
        alaGvrpPortStatsJoinInTransmitted,
        alaGvrpPortStatsEmptyTransmitted,
        alaGvrpPortStatsLeaveInTransmitted,
        alaGvrpPortStatsLeaveEmptyTransmitted,
        alaGvrpPortStatsLeaveAllTransmitted,
        alaGvrpPortStatsTotalPDUReceived,
        alaGvrpPortStatsTotalPDUTransmitted,
        alaGvrpPortStatsTotalMsgsReceived,
        alaGvrpPortStatsTotalMsgsTransmitted,
        alaGvrpPortStatsInvalidMsgsReceived,
        alaGvrpPortStatsClearStats
   }
   STATUS  current
   DESCRIPTION
        "Collection of objects for management of GVRP Statistics Table."
   ::= { alcatelIND1GVRPMIBGroups 3 }


gvrpNotificationGroup NOTIFICATION-GROUP
   NOTIFICATIONS
   {
        gvrpVlanLimitReachedEvent
   }
   STATUS  current
   DESCRIPTION
        "Collection of notifications for GVRP."
   ::= { alcatelIND1GVRPMIBGroups 4 }

-- -------------------------------------------------------------

END