path: root/MIBS/nokia/aos7/ALCATEL-IND1-CHASSIS-MIB

ALCATEL-IND1-CHASSIS-MIB DEFINITIONS ::= BEGIN

IMPORTS
         OBJECT-TYPE,
         OBJECT-IDENTITY,
         MODULE-IDENTITY,
         NOTIFICATION-TYPE,
         Unsigned32, Integer32, IpAddress,
         Counter32              FROM SNMPv2-SMI
         PhysicalIndex,
         entPhysicalIndex       FROM ENTITY-MIB
         hardentIND1Physical,
         hardentIND1Chassis     FROM ALCATEL-IND1-BASE
         SnmpAdminString        FROM SNMP-FRAMEWORK-MIB
         MacAddress,
         TruthValue,
         DisplayString,
         TEXTUAL-CONVENTION     FROM SNMPv2-TC
         MODULE-COMPLIANCE,
         OBJECT-GROUP,
         NOTIFICATION-GROUP     FROM SNMPv2-CONF;


alcatelIND1ChassisMIB MODULE-IDENTITY
    LAST-UPDATED "201103230000Z"
    ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division"
    CONTACT-INFO
     "Please consult with Customer Service to ensure the most appropriate
      version of this document is used with the products in question:

                 Alcatel-Lucent, Enterprise Solutions Division
                (Formerly Alcatel Internetworking, Incorporated)
                        26801 West Agoura Road
                     Agoura Hills, CA  91301-5122
                       United States Of America

     Telephone:               North America  +1 800 995 2696
                              Latin America  +1 877 919 9526
                              Europe         +31 23 556 0100
                              Asia           +65 394 7933
                              All Other      +1 818 878 4507

     Electronic Mail:         support@ind.alcatel.com
     World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
     File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
        etwork Management Protocol (SNMP) Management Information Base (MIB):

        For the Birds Of Prey Product Line, this is the Chassis Supervision
        Chassis MIB
        for managing physical chassis objects not covered in the IETF
        Entity MIB (rfc 2737).

        The right to make changes in specification and other information
        contained in this document without prior notice is reserved.

        No liability shall be assumed for any incidental, indirect, special, or
        consequential damages whatsoever arising from or related to this
        document or the information contained herein.

        Vendors, end-users, and other interested parties are granted
        non-exclusive license to use this specification in connection with
        management of the products for which it is intended to be used.

                   Copyright (C) 1995-2007 Alcatel-Lucent
                       ALL RIGHTS RESERVED WORLDWIDE"

        REVISION      "201409020000Z"
        DESCRIPTION
            "Added chasEntPhysFanSpeed object."

        REVISION      "201110310000Z"
        DESCRIPTION
            "Added changes for virtual chassis."

        REVISION      "201110140000Z"
        DESCRIPTION
            "Added chasEntPhysPowerUsed object."

        REVISION      "201108050000Z"
        DESCRIPTION
            "Added chasEntTemperatureTable."

        REVISION      "201103230000Z"
        DESCRIPTION
            "Added image file MD5 checksum changed alert, airflow, and temperature alerts"


        REVISION      "201005130000Z"
        DESCRIPTION
            "Fixed the Notifications to use MIB Module OID.0 as Notifications root."

        REVISION      "200706180000Z"

        DESCRIPTION
            "Addressing discrepancies with Alcatel Standard."
     ::= { hardentIND1Chassis 1 }


    alcatelIND1ChassisMIBNotifications OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis MIB Subsystem Notifications."
        ::= { alcatelIND1ChassisMIB 0 }

    alcatelIND1ChassisMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Managed Objects."
        ::= { alcatelIND1ChassisMIB 1 }

    alcatelIND1ChassisMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Conformance Information."
        ::= { alcatelIND1ChassisMIB 2 }

    alcatelIND1ChassisMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Units Of Conformance."
        ::= { alcatelIND1ChassisMIBConformance 1 }


    alcatelIND1ChassisMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis MIB
            Subsystem Compliance Statements."
        ::= { alcatelIND1ChassisMIBConformance 2 }


    alcatelIND1ChassisPhysMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Managed Objects."
        ::= { hardentIND1Physical 1 }


    alcatelIND1ChassisPhysMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Conformance Information."
        ::= { hardentIND1Physical 2 }


    alcatelIND1ChassisPhysMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Units Of Conformance."
        ::= { alcatelIND1ChassisPhysMIBConformance 1 }


    alcatelIND1ChassisPhysMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Chassis Supervision Chassis Physical MIB
            Subsystem Compliance Statements."
        ::= { alcatelIND1ChassisPhysMIBConformance 2 }

-- Textual Conventions 

        AlaChasBpsShelfId ::= TEXTUAL-CONVENTION
        STATUS          current
        DESCRIPTION
        "BPS shelf Id ."
        SYNTAX          Integer32 (1..3)

        ChasTrapsBPSPowerSupply ::= TEXTUAL-CONVENTION
        STATUS       current
        DESCRIPTION
        "Textual convention for type of bps power supply."
        SYNTAX    INTEGER 
                    {
                          bpsSysPower1          (1),
                          bpsSysPower2          (2),
                          bpsPoePower1          (3),
                          bpsPoePower2          (4),
                          bpsPoePower3          (5),
                          notApplicable         (6)
                    }

        ChasTrapsBPSFetState ::= TEXTUAL-CONVENTION
        STATUS   current
        DESCRIPTION
        "Textual convention for BPS FET state"
        SYNTAX  INTEGER 
                {
                    on                    (1),
                    off                   (2),
                    notApplicable         (3)
                }

        ChasTrapsBPSEventAlert ::= TEXTUAL-CONVENTION
        STATUS current
        DESCRIPTION
        "Textual convention for BPS event alert"
        SYNTAX   INTEGER 
                {
                    bpsPsPlugged                 (1),
                    bpsPsUnPlugged               (2),
                    bpsModeChanged               (3),
                    notApplicable                (4)
               }

        ChasTrapsBPSFwType ::= TEXTUAL-CONVENTION
        STATUS   current
        DESCRIPTION
        "Textual convention for BPS FW upgrade requirment alert"
        SYNTAX  INTEGER 
                {
                    bpsFwCmcu             (1),
                    bpsFwMmcu             (2),
                    bpsFwCpld             (3),
                    notApplicable         (4)
                }


-- CONTROL MODULE TABLE

chasControlModuleTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasControlModuleEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This table contains one row for the primary control module."
::= { alcatelIND1ChassisMIBObjects 1 }


chasControlModuleEntry OBJECT-TYPE
        SYNTAX ChasControlModuleEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "Information about the primary control module. This table is an extension
        of the entity physical table but this class is instanciated only for a
        the primary control module that has a particular Index. When operatiing
        in virtual chassis mode only the master primary control module is
        instanciated"
        INDEX { entPhysicalIndex }
::= { chasControlModuleTable 1 }


ChasControlModuleEntry ::= SEQUENCE
        {
                chasControlActivateTimeout            Integer32,
                chasControlVersionMngt                INTEGER,
                chasControlDelayedActivateTimer       Unsigned32,
                chasControlCertifyStatus              INTEGER,
                chasControlSynchronizationStatus      INTEGER,
                chasControlAcrossCmmWorkingSynchroStatus     INTEGER,
                chasControlAcrossCmmCertifiedSynchroStatus   INTEGER,
                chasControlNextRunningVersion         SnmpAdminString,
                chasControlCurrentRunningVersion      SnmpAdminString,
                chasControlWorkingVersion             SnmpAdminString,
                chasControlRedundancyTime             Integer32,
                chasControlEmpIpAddress               IpAddress,
                chasControlEmpIpMask                  IpAddress,
                chasControlChassisId                  Integer32


        }

chasControlActivateTimeout OBJECT-TYPE
        SYNTAX Integer32 (0..900)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "This value is in seconds. It represents how much time before the
        switch automatically falls back to the certified version. This value
        is set via the Activate(reload working) cli command.
        An Activate reboot must be initiated via the primary CMM and that
        the timeout value can be accessed via user interface to the primary CMM
        only. After the Activate reboot has been initiated, a timeout will occur
        (i.e., an Activate Timeout) at the timeout value specified by the user.
        If a reboot cancel has not been received prior to the timeout expiration,
        the primary CMM will automatically reboot (i.e., re-reboot) using the
        certified configuration. This ensures that an automatic backup reboot is
        available using the certified configuration in the event that the user
        is unable to interface with primary CMM as a result of the attempted
        Activate reboot. If the Activate reboot is successful, the user cancels
        the backup reboot via the normal reboot cancellation process (i.e., a
        zero value is written for the object chasControlDelayedRebootTimer)."
::= { chasControlModuleEntry 1 }


chasControlVersionMngt OBJECT-TYPE
        SYNTAX INTEGER
        {
        notSignificant(1),
        certifySynchro(2),
        certifyNoSynchro(3),
        flashSynchro(4),
        restore(5),
        activate(6),
        issu(7),
        shutdown(8),
        vcConvert(9)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "For the primary this means:
                notSignificant   - No command applied.
                certifySynchro   - Copy the file from the working to the certified
                                   directory and from the primary to the secondary
                                   (reboot of the secondary).
                certifyNoSynchro - Copy the file from the working to the certified
                                   directory.
                flashSynchro -     Copy the file from the primary to the secondary
                                   (reboot of the secondary).
                restore -          Copy the file from the certified directory to the
                                   working directory.
                activate -         Reload from the working directory. Activate can be
                                   scheduled.
                issu -             In Service Software Upgrade (ISSU).
                shutdown -         Shutdown chassis specified by chasControlChassisId.
                                   Halts and powers off NIs, halts primary and
                                   secondary CMMs.
                vcConvert -        Copy the image files from the running directory
                                   to the working directory."

::= { chasControlModuleEntry 2 }


chasControlDelayedActivateTimer OBJECT-TYPE
        SYNTAX Unsigned32 (0..31622400)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "Timer value in seconds used to initiate a delayed activate of the primary
        CMM. Writing this object to a non-zero value results in CMM reboot of the
        working  directory following expiration of the specified activate timer delay.
        Writing this object to zero results in an immediately activate process.
                It is now adjusted to wait a maximum of 366 days."
::= { chasControlModuleEntry 3 }



chasControlCertifyStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                needCertify(2),
                certified(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the control module has been certified
     (that is the working directory matches the certified directory)"
::= { chasControlModuleEntry 4 }


chasControlSynchronizationStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                monoControlModule(2),
                notSynchronized(3),
                synchronized(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the control module has been synchronized
     (that is the working directory matches the working directory
     on the other control module(s) if present).  Returned value is
     monoControlModule when no other control module is present."
::= { chasControlModuleEntry 5 }


chasControlAcrossCmmWorkingSynchroStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                monoCMM(2),
                no(3),
                yes(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the /working has been synchronized
     across the CMMs (that is the working directory matches the working directory
     on all CMMs if present)"
::= { chasControlModuleEntry 6 }

chasControlAcrossCmmCertifiedSynchroStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                monoCMM(2),
                no(3),
                yes(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the /certified has been synchronized
        across the CMMs if present)"
::= { chasControlModuleEntry 7 }

chasControlNextRunningVersion OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "The pathname for the image directory that will be
        used on the next reload. Value may be /flash/certified
        or /flash/<working directory name>."
::= { chasControlModuleEntry 8 }

chasControlCurrentRunningVersion OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "The pathname of the image directory to the version
        that is currently executing. Value may be /flash/certified
        or /flash/<working directory name>."
::= { chasControlModuleEntry 9 }

chasControlWorkingVersion OBJECT-TYPE
        SYNTAX SnmpAdminString
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "The path to the currently specified working image directory.
         Value may be /flash/certified or /flash/<working directory name>."
::= { chasControlModuleEntry 10 }

chasControlRedundancyTime OBJECT-TYPE
        SYNTAX Integer32 (0..900)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "Time in minutes that the running image must stay up without error
         before a subsequent error reset will restart the board from the
         running image. If a CMM in dual-CMM switch fails after a reload
         and before chasControlRedundancyTime expires, both CMMs will be
         rebooted from the certified version."
::= { chasControlModuleEntry 11 }

chasControlEmpIpAddress OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-write
        STATUS deprecated
        DESCRIPTION
        "This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
         when configuring EMP interfaces.

         The IP Address for the primary control module EMP interface.
         This address is used for managing the chassis and will
         continue as the EMP interface address after a takeover."
::= { chasControlModuleEntry 12 }

chasControlEmpIpMask OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-write
        STATUS deprecated
        DESCRIPTION
        "This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
         when configuring EMP interfaces.

         The IP Address Mask for the primary control module EMP interface.
         This address mask is used for managing the chassis and will
         continue as the EMP interface mask after a takeover."
::= { chasControlModuleEntry 13 }

chasControlChassisId OBJECT-TYPE
        SYNTAX Integer32 (0..16)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "The virtual chassis id for the action specified by
         chasControlVersionMngt when operating in virtual
         chassis mode. A value of 0 indicates the local
         chassis."
::= { chasControlModuleEntry 14 }


-- CONTROL REDUNDANT TABLE


chasControlRedundantTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasControlRedundantEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This table contains one row per control module. There is always at least
        one control module in the system."
::= { alcatelIND1ChassisMIBObjects 2 }


chasControlRedundantEntry OBJECT-TYPE
        SYNTAX ChasControlRedundantEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "Information about a particular control module this table is an extension
        of the entity physical table but this class is instanciated only for a
        particular type of physical entity: the control module that has a
        particular Index. When running in virtual chassis mode, entries are
        instantiated for the Master and all the slave CMMs"
        INDEX { entPhysicalIndex }
::= { chasControlRedundantTable 1 }


ChasControlRedundantEntry ::= SEQUENCE
        {
                chasControlNumberOfTakeover           Counter32,
                chasControlDelayedRebootTimer         Unsigned32,
                chasControlDelayedResetAll            Integer32
        }


chasControlNumberOfTakeover OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object is a count of the number of times the control module has
        changed from primary to secondary mode as a result of a Takeover. Note
        that this object can be accessed via user interface to either the
        primary or secondary CMM. The value returned is the number of times
        that the interfacing control module (either primary or secondary CMM)
        has changed from primary to secondary mode. This value does not reflect
        the total number of CMM Takeovers for the switch. To get the total
        number of Takeovers for the switch, it is necessary to read this value
        via user interface to each control module independently."
::= { chasControlRedundantEntry 1 }


chasControlDelayedRebootTimer OBJECT-TYPE
        SYNTAX Unsigned32 (0.. 31622400)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "Timer value (in seconds) used to initiate a delayed reboot of the primary
        or secondary CMM using the certified configuration.  Writing this object to
        a non-zero value results in a CMM reboot following expiration of the
        specified reset timer delay.  Writing this object to zero results in
        cancellation of a pending CMM delayed reboot.
        It is now adjusted to wait a maximum of 366 days."
::= { chasControlRedundantEntry 2 }

chasControlDelayedResetAll OBJECT-TYPE
        SYNTAX Integer32 (-1..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "This object is used to schedule a delayed reset all action for a chassis
        when running in virtual chassis mode. If set to -1 - cancel the timer,
        0 - reset all immediately, any other value will start counting down the
        time until reset."
    DEFVAL { -1 }
::= { chasControlRedundantEntry 3 }


 -- CHASSIS TABLE

chasChassisTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasChassisEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This table contains one row per chassis. There is always at least one
        chassis or many when running in virtual chassis mode."
::= { alcatelIND1ChassisMIBObjects 3 }


chasChassisEntry OBJECT-TYPE
        SYNTAX ChasChassisEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
    "Information about a particular control module this table is an extension
         of the entity physical table but this class is instanciated only for a
         particular type of physical entity: the control module that has a
         particular Index."
        INDEX { entPhysicalIndex }
::= { chasChassisTable 1 }


ChasChassisEntry ::= SEQUENCE
    {
        chasFreeSlots               Unsigned32,
        chasPowerLeft               Integer32,
        chasNumberOfResets          Counter32,
        chasTempRange               INTEGER,
        chasTempThreshold           Integer32,
        chasDangerTempThreshold     Integer32,
        chasPrimaryPhysicalIndex    Integer32,
        chasCPMAHardwareBoardTemp   Integer32,
        chasCFMAHardwareBoardTemp   Integer32,
        chasCPMBHardwareBoardTemp   Integer32,
        chasCFMBHardwareBoardTemp   Integer32,
        chasCFMCHardwareBoardTemp   Integer32,
        chasCFMDHardwareBoardTemp   Integer32,
        chasFTAHardwareBoardTemp    Integer32,
        chasFTBHardwareBoardTemp    Integer32,
        chasNI1HardwareBoardTemp    Integer32,
        chasNI2HardwareBoardTemp    Integer32,
        chasNI3HardwareBoardTemp    Integer32,
        chasNI4HardwareBoardTemp    Integer32,
        chasNI5HardwareBoardTemp    Integer32,
        chasNI6HardwareBoardTemp    Integer32,
        chasNI7HardwareBoardTemp    Integer32,
        chasNI8HardwareBoardTemp    Integer32,
        chasPowerSupplyRedundancy   INTEGER,
        chasPowerSupplyRedundancyReserve  INTEGER
    }


chasFreeSlots OBJECT-TYPE
        SYNTAX Unsigned32       (0..18)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "The number of free NI front panel slots."
::= { chasChassisEntry 1 }


chasPowerLeft OBJECT-TYPE
        SYNTAX Integer32 (-100000..100000)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "The power still available on the chassis in Watts."
::= { chasChassisEntry 2 }


chasNumberOfResets OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object is a count of the number of times this station has been reset
         since a cold-start."
::= { chasChassisEntry 3 }

chasTempRange OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                notPresent(2),
                underThreshold(3),
                overFirstThreshold(4),
                overDangerThreshold(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Temp Range is the value of the temperature sensor for the chassis. The
         Temp Range value reflects the temperature of the chassis relative to the
         Temp Threshold value (i.e., over vs. under the threshold)."
::= { chasChassisEntry 4 }


chasTempThreshold OBJECT-TYPE
        SYNTAX Integer32 (1..150)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
       "This object is the threshold temperature in degrees Celsius for the
        chassis. Temp Threshold is the chassis temperature point at which,
        when reached due to an ascending or descending temperature transition,
        a temperature notification is provided to the user. When this threshold
        is exceeded, we start sending traps and other operator notification."
::= { chasChassisEntry 5 }

chasDangerTempThreshold OBJECT-TYPE
        SYNTAX Integer32 (30..150)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This Threshold is a second one which is hardcoded. When the
         Chassis Exceeds this value it starts shutting down NIs.
         This value will be set by the factory and not changeable."
::= { chasChassisEntry 6 }


chasPrimaryPhysicalIndex OBJECT-TYPE
        SYNTAX Integer32 (1..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This value holds the Entity Table Physical Index for the Control
         Module that is currently primary. This is to allow snmp managers
         to determine which Control Module is currently primary so it knows
         what entry in the chasControlModuleTable to access for setting the
         chasControlVersionMngt values for controling the switch. When running
         in virtual chassis mode, it will contain the Physical Index of the
         master primary Control Module."
::= { chasChassisEntry 7 }

chasCPMAHardwareBoardTemp       OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         CPMA control module board. This temperature is what is used for
         comparing to the threshold and determining whether the value
         is in range."
::= { chasChassisEntry 8 }

chasCFMAHardwareBoardTemp       OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         CFMA fabric board. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 9 }

chasCPMBHardwareBoardTemp       OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         CPMB control module board. This temperature is what is used for
         comparing to the threshold and determining whether the value
         is in range."
::= { chasChassisEntry 10 }

chasCFMBHardwareBoardTemp       OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         CFMB fabric board. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 11 }

chasCFMCHardwareBoardTemp       OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         CFMC fabric board. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 12 }

chasCFMDHardwareBoardTemp       OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         CFMD fabric board. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 13 }

chasFTAHardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for
         Fantray 1. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 14 }

chasFTBHardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for
         Fantry 2. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 15 }

chasNI1HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 1. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 16 }

chasNI2HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 2. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 17 }

chasNI3HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 3. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 18 }

chasNI4HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 4. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 19 }

chasNI5HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 5. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 20 }

chasNI6HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 6. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 21 }

chasNI7HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 7. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 22 }

chasNI8HardwareBoardTemp        OBJECT-TYPE
    SYNTAX              Integer32 (0..200)
    MAX-ACCESS  read-only
    STATUS              current
    DESCRIPTION
        "This object indicates the current output of the Board Temperature
         Sensor provided by the LM75 part (degrees Centigrade) for the
         NI board in slot 8. This temperature is what is used for comparing
         to the threshold and determining whether the value is in range."
::= { chasChassisEntry 23 }

chasPowerSupplyRedundancy       OBJECT-TYPE
    SYNTAX INTEGER
    {
       on(1),
       off(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates the state of power supply redundancy mode.
         When on(1), N+1 mode redundancy is enabled(default mode). In
         this mode the system controls the power supplies to maintain
         efficient use of the power supplies, with 1 extra power supply
         in case of a power supply failure. Unneeded power supplies are
         powered off. It can be set to off(2) to disable redundancy mode.
         In this mode all power supplies are powered on.
         This object is applicable only to OS10K devices."
    DEFVAL   { on }
::= { chasChassisEntry 24 }

chasPowerSupplyRedundancyReserve       OBJECT-TYPE
    SYNTAX INTEGER
    {
       on(1),
       off(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When chasPowerSupplyRedundancyReserve is enabled, N+1 power supply 
         redundancy reserve holds the wattage of one power supply in reserve 
         such that the user cannot insert NIs or configure power over Ethernet (POE)
         that will use the reserved power from that supply. There are two main advantages 
         to enabling chasPowerSupplyRedundancyReserve. The first advantage is that 
         it provides resiliency to avoid POE drawing power from the four main power supplies
         in the OS9900 chassis to the extent that POE sinks much more wattage than 
         the CMM, CFM, and NI board logic combined. (Note: The power management functions 
         on the OS9900 are complicated by the presence of the controllers on the GNI-P48 boards. 
         Unlike other chassis supporting POE, like OS6860, there is no separate power supply 
         for the POE front-panel ports.) This is not to be confused with chasPowerSupplyRedundancy 
         which switches off unneeded power supplies - on the OS9900, all inserted power supplies
         are always switched on and enabled. The second advantage of enabling 
         chasPowerSupplyRedundancyReserve is to avoid 'brown-outs'. 
         (A brown-out may happen when a system running at full POE capacity without the N+1 redundancy reserve
         enabled suffers a power supply failure causing the POE hardware to immediately
         disable power over Ethernet on the basis of port priority as soon as it detects the failure.
         Then, if there is still insufficient power available to run the logic and fan trays,
         the power supplies will 'crowbar' and the system will be power cycled. The software can 
         do little in this scenario since there is insufficient power to keep the CPU chips running.
         When the system reboots the chassis supervisor will only power-up NI slots based 
         upon the power available from the remaining power supplies.)"
    DEFVAL   { on }
::= { chasChassisEntry 25 }

-- Extension of the Entity physical table

chasEntPhysicalTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasEntPhysicalEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This table contains one row per physical entity. It is an extension for
        the entity physical table (rfc 2737) that is instantiated for every physical entity
        object. The fields are not always significant for every object."
::= { alcatelIND1ChassisPhysMIBObjects 1 }


chasEntPhysicalEntry OBJECT-TYPE
        SYNTAX ChasEntPhysicalEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "Information about a particular physical entity."
        INDEX { entPhysicalIndex }
::= { chasEntPhysicalTable 1 }


ChasEntPhysLed ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Textual convention for physical LEDs.  Note: Due to European regulation, the LEDs
         will never be illuminated in red, but will be either green or amber."
    SYNTAX    INTEGER {
        notApplicable         (0),
        off                   (1),
        greenOn               (2),
        greenBlink            (3),
        amberOn               (4),
        amberBlink            (5)
    }

ChasEntPhysicalEntry ::= SEQUENCE
    {
        chasEntPhysAdminStatus                INTEGER,
        chasEntPhysOperStatus                 INTEGER,
        chasEntPhysPower                      Integer32,
        chasEntPhysModuleType                 SnmpAdminString,
        chasEntPhysPartNumber                 SnmpAdminString,
        chasEntPhysLedStatusOk1               ChasEntPhysLed,
        chasEntPhysLedStatusOk2               ChasEntPhysLed,
        chasEntPhysLedStatusPrimaryCMM        ChasEntPhysLed,
        chasEntPhysLedStatusSecondaryCMM      ChasEntPhysLed,
        chasEntPhysLedStatusTemperature       ChasEntPhysLed,
        chasEntPhysLedStatusFan               ChasEntPhysLed,
        chasEntPhysLedStatusBackupPS          ChasEntPhysLed,
        chasEntPhysLedStatusInternalPS        ChasEntPhysLed,
        chasEntPhysLedStatusControl           ChasEntPhysLed,
        chasEntPhysLedStatusFabric            ChasEntPhysLed,
        chasEntPhysLedStatusPS                ChasEntPhysLed,
        chasEntPhysAsic1Rev                    SnmpAdminString,
        chasEntPhysAsic2Rev                    SnmpAdminString,
        chasEntPhysAsic3Rev                    SnmpAdminString,
        chasEntPhysAsic4Rev                    SnmpAdminString,
        chasEntPhysAsic5Rev                    SnmpAdminString,
        chasEntPhysAsic6Rev                    SnmpAdminString,
        chasEntPhysCpldRev                    SnmpAdminString,
        chasEntPhysDaughterFpga1Rev           SnmpAdminString,
        chasEntPhysDaughterFpga2Rev           SnmpAdminString,
        chasEntPhysNiNum                      Integer32,
        chasEntPhysGbicNum                    Integer32,
        chasEntPhysWaveLen                    Integer32,
        chasEntPhysUbootRev                   SnmpAdminString,
        chasEntPhysUbootMinibootRev           SnmpAdminString,
        chasEntPhysMacAddress                 MacAddress,
        chasEntPhysCpuModel                   SnmpAdminString,
        chasEntPhysAirflow                    INTEGER,
        chasEntPhysPowerUsed                  Integer32,
        chasEntPhysPowerType                  INTEGER
    }


chasEntPhysAdminStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                powerOff(2),
                powerOn(3),
                reset(4),
                takeover(5),
                resetAll(6),
                standby(7),
                resetWithFabric(8),
                takeoverWithFabrc(9),
                vcTakeover(10),
                resetVcAll(11)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "All modules (even empty slots) are in unknown state when the chassis
             first powers up.

        Chassis status possible value:
                powerOn <=> powered up

        Control Module possible value:
                powerOn <=> CM up and running
                reset <=> CM reset
                takeover <=> Secondary CM takes over
                resetAll <=> resets the whole switch
                vcTakeover <=> Reloads master chassis from the current working directory,
                               which initiates a VC takeover.
                vcResetAll <=> resets entire VC.
        NI status possible value:
                powerOn <=> NI is either powered (up or down) or waiting to be powered
                        whenever more power is available. This admin status has not full meaning
                        without chasEntPhysOperStatus
                powerOff <=> NI down and unpowered and NI will not be powered until user
                        requests it, a failover happens or a reboot happens
                reset <=> NI reset

        FABRIC status possible value:
                powerOn     <=> FABRIC is powered
                powerOff    <=> FABRIC is unpowered
                standby     <=> FABRIC is powered and requested to be redundant (inactive)

        Daughter board status possible value:
                powerOn <=> DB up and running
                reset <=> DB reset (TO BE CONFIRMED)

        Power supply status possible value:
                powerOn <=> PS up"
::= { chasEntPhysicalEntry 1 }


chasEntPhysOperStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                up(1),
                down(2),
                testing(3),
                unknown(4),
                secondary(5),
                notPresent(6),
                unpowered(7),
                master(8),
                idle(9),
                pwrsave(10)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "All modules (even empty slots) are in unknown state when the chassis
        first powers up.

        Chassis status possible value :
                up <=> powered up

        Control Module possible value :
                notPresent <=> CM not present
                up <=> CM up and running
                down <=> CM down and powered
                secondary <=> CM in secondary mode and running

        NI status possible value :
                notPresent <=> NI not present
                up <=> NI up and running
                down <=> NI down and powered
                unpowered <=> NI unpowered because there is not enough power in the system
                              (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF
                              (chasEntPhysAdminStatus = powerOff). This operational status has
                  not full meaning without chasEntPhysAdminStatus

        Fabric status possible value :
                master <=> up and acting as master
                up <=> up and acting as slave
                secondary <=> secondary mode for redundancy

        Daughter board status possible value :
                notPresent <=> DB not present
                up <=> DB up and running
                down <=> DB down and powered

        Power supply status possible value :
                up <=> PS up
                down <=> PS administratively down
                unpowered <=> PS not plugged in
                pwrsave <=> chassis in powersave mode, supply turned off

        Fan Tray status possible value :
                up <=> powered up
                down <=> powered down
                fault <=> fault detected"
::= { chasEntPhysicalEntry 2 }


chasEntPhysPower OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
        "This value is only applicable to the NI, PS and Control Modules.  It
         corresponds to a a static value for the power consumption of an NI
         module or Control Module. This value is in Watts."
        ::= { chasEntPhysicalEntry 3 }

chasEntPhysModuleType OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is the unique Module Type or ID from the entities eeprom.
             This value is guarrantteed to be unique to each type of Module.
             This value is only intended for Alcatel internal use."
        ::= { chasEntPhysicalEntry 4 }

chasEntPhysPartNumber OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the Alcatel Part Number for the entity.
             This value is used to identify what is
             needed when placing orders with Alcatel."
        ::= { chasEntPhysicalEntry 5 }

chasEntPhysLedStatusOk1               OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Management Module (CMM) front panel LED OK1 status indication"
        ::= { chasEntPhysicalEntry 6 }

chasEntPhysLedStatusOk2               OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Management Module (CMM) front panel LED OK2 status indication"
        ::= { chasEntPhysicalEntry 7 }

chasEntPhysLedStatusPrimaryCMM        OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Management Module (CMM) front panel LED Primary chassis indication"
        ::= { chasEntPhysicalEntry 8 }

chasEntPhysLedStatusSecondaryCMM      OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Management Module (CMM) front panel LED Secondary chassis indication"
        ::= { chasEntPhysicalEntry 9 }

chasEntPhysLedStatusTemperature       OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Management Module (CMM) front panel LED temperature status indication"
        ::= { chasEntPhysicalEntry 10 }

chasEntPhysLedStatusFan               OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
            "For Hawk stacks used as a fan group status LED.  For eagle CMM's user instead:
             Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)"
        ::= { chasEntPhysicalEntry 11 }

chasEntPhysLedStatusBackupPS          OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
            "Chassis backup power supply status indication"
        ::= { chasEntPhysicalEntry 12 }

chasEntPhysLedStatusInternalPS        OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis internal power supply status indication"
        ::= { chasEntPhysicalEntry 13 }

chasEntPhysLedStatusControl           OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis control status"
        ::= { chasEntPhysicalEntry 14 }

chasEntPhysLedStatusFabric            OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Management Module (CMM) Fabric status indication"
        ::= { chasEntPhysicalEntry 15 }

chasEntPhysLedStatusPS               OBJECT-TYPE
        SYNTAX                  ChasEntPhysLed
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Chassis Power Supply Unit status indication"
        ::= { chasEntPhysicalEntry 16 }

chasEntPhysAsic1Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 17 }

chasEntPhysAsic2Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 18 }

chasEntPhysAsic3Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 19 }

chasEntPhysAsic4Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 20 }

chasEntPhysAsic5Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 21 }

chasEntPhysAsic6Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the ASIC revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 22 }

chasEntPhysCpldRev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the CPLD revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 23 }

chasEntPhysDaughterFpga1Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the daughter fpga revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 24 }

chasEntPhysDaughterFpga2Rev               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the daughter fpga revision Number of the ni entity"
        ::= { chasEntPhysicalEntry 25 }


chasEntPhysNiNum                OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value is only applicable to the NI.  It indicates an NI associated with this physicalEntry"
        ::= { chasEntPhysicalEntry 26 }

chasEntPhysGbicNum              OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value is only applicable to the NI.  It indicates a gbic associated with this ni"
        ::= { chasEntPhysicalEntry 27 }

chasEntPhysWaveLen              OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the wave length of a SFP device"
        ::= { chasEntPhysicalEntry 28 }

chasEntPhysUbootRev             OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the uboot version Number of the ni entity"
        ::= { chasEntPhysicalEntry 29 }

chasEntPhysUbootMinibootRev             OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..14))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the uboot miniboot version Number of the ni entity"
        ::= { chasEntPhysicalEntry 30 }

chasEntPhysMacAddress             OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the MAC address of the ni entity"
        ::= { chasEntPhysicalEntry 31 }

chasEntPhysCpuModel               OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object contains the model description of the cmm/ni cpu"
        ::= { chasEntPhysicalEntry 32 }

chasEntPhysAirflow              OBJECT-TYPE
    SYNTAX      INTEGER {
        frontToRear(0),
        rearToFront(1),
        notApplicable(2)
    }

    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chassis PS fan airflow direction"
        ::= { chasEntPhysicalEntry 33 }

chasEntPhysPowerUsed            OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value is only applicable to the PS.  It is the current
         reading for the power usage of the PS. This value is in Watts."
        ::= { chasEntPhysicalEntry 34 }


chasEntPhysPowerType OBJECT-TYPE
SYNTAX     INTEGER{
    notApplicable(0),
        ac(1),
        dc(2),
        bps(3)
}

    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is the type of the power supply, It corresponds to AC,
	     DC or BPS. This value is only intended for Alcatel internal use."
        ::= { chasEntPhysicalEntry 35 }

-- Extension of the Entity physical table

chasEntTemperatureTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasEntTemperatureEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "This table contains one row per temperature sensor located on an entity
         represented by the associated row in the entPhysicalTable."
::= { alcatelIND1ChassisPhysMIBObjects 2 }


chasEntTemperatureEntry OBJECT-TYPE
        SYNTAX ChasEntTemperatureEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "Information about a particular physical temperature sensor."
        INDEX { entPhysicalIndex }
::= { chasEntTemperatureTable 1 }


ChasEntTemperatureEntry ::= SEQUENCE
    {
        chasEntTempCurrent                       Integer32,
        chasEntTempThreshold                     Integer32,
        chasEntTempDangerThreshold               Integer32,
        chasEntTempStatus                        INTEGER
    }

chasEntTempCurrent OBJECT-TYPE
        SYNTAX Integer32 (0..200)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object indicates the current output of the temperature
         sensor in degrees Celsius."
::= { chasEntTemperatureEntry 1 }

chasEntTempThreshold OBJECT-TYPE
        SYNTAX Integer32 (1..150)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
       "This object is the threshold temperature in degrees Celsius for the
        sensor. When the value of chasEntTempCurrent exceeds this value,
        a temperature notification is provided to the user."
::= { chasEntTemperatureEntry 2 }

chasEntTempDangerThreshold OBJECT-TYPE
        SYNTAX Integer32 (30..150)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object is the danger threshold temperature in degrees Celsius for
         the sensor. When the value of chasEntTempCurrent exceeds this value, the
         associated physical entity is powered down."
::= { chasEntTemperatureEntry 3 }

chasEntTempStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                unknown(1),
                notPresent(2),
                underThreshold(3),
                overFirstThreshold(4),
                overDangerThreshold(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object is the status value of the temperature sensor.
         It reflects the temperature relative to the chasEntTempThreshold
         and chasEntTempDangerThreshold values."
::= { chasEntTemperatureEntry 4 }

-- CHASSIS SUPERVISION RFS TABLES

chasSupervisionRfsLsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasSupervisionRfsLsEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
        "This table contains a list of file on the remote chassis per directory."
        ::= { alcatelIND1ChassisMIBObjects 4 }

chasSupervisionRfsLsEntry OBJECT-TYPE
        SYNTAX          ChasSupervisionRfsLsEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
        "Information about a remote file.
         A row in this table contains a file per directory per chassis"
    INDEX { chasSupervisionRfsLsFileIndex }
        ::= { chasSupervisionRfsLsTable 1 }

ChasSupervisionRfsLsEntry ::= SEQUENCE
        {
                chasSupervisionRfsLsFileIndex     Integer32,
                chasSupervisionRfsLsSlot          Unsigned32,
                chasSupervisionRfsLsDirName       SnmpAdminString,
                chasSupervisionRfsLsFileName      SnmpAdminString,
                chasSupervisionRfsLsFileType      INTEGER,
                chasSupervisionRfsLsFileSize      Unsigned32,
                chasSupervisionRfsLsFileAttr      INTEGER,
                chasSupervisionRfsLsFileDateTime  SnmpAdminString
        }

chasSupervisionRfsLsFileIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..100)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "This value holds file Index for the RFS LS table."
        ::= { chasSupervisionRfsLsEntry 1}

chasSupervisionRfsLsSlot OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "CMM Slot where remote file is located."
        ::= { chasSupervisionRfsLsEntry 2}

chasSupervisionRfsLsDirName OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..255))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "The remote directory name where remote file is located in"
        DEFVAL { "/flash" }
        ::= { chasSupervisionRfsLsEntry 3 }

chasSupervisionRfsLsFileName OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..33))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The file name of remote file"
        DEFVAL { "" }
        ::= { chasSupervisionRfsLsEntry 4 }

chasSupervisionRfsLsFileType OBJECT-TYPE
        SYNTAX          INTEGER {
                        file(1),
                        directory(2),
                        undefined(3),
                        tarArchive(4)
                    }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The Type of a remote file"
        DEFVAL          { undefined }
        ::= { chasSupervisionRfsLsEntry 5 }

chasSupervisionRfsLsFileSize OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "size of this remote file"
        DEFVAL          { 0 }
        ::= { chasSupervisionRfsLsEntry 6 }

chasSupervisionRfsLsFileAttr OBJECT-TYPE
        SYNTAX          INTEGER {
                        undefined(1),
                        readOnly(2),
                        readWrite(3),
                        writeOnly(4)
                    }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "attributes of this remote file"
        DEFVAL          { undefined }
        ::= { chasSupervisionRfsLsEntry 7 }

chasSupervisionRfsLsFileDateTime OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..16))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "the modification date and time of a remote file"
        DEFVAL          { "" }
        ::= { chasSupervisionRfsLsEntry 8 }


chasSupervisionRfsDfTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ChasSupervisionRfsDfEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "This table contains information about file system size and use."
        ::= { alcatelIND1ChassisMIBObjects 8 }

chasSupervisionRfsDfEntry OBJECT-TYPE
        SYNTAX          ChasSupervisionRfsDfEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "This entry contains information about file system size and use."
    INDEX { chasSupervisionRfsDfSlot }
        ::= { chasSupervisionRfsDfTable 1 }

ChasSupervisionRfsDfEntry ::= SEQUENCE
        {
                chasSupervisionRfsDfSlot          Integer32,
                chasSupervisionRfsDfFlashFree     Unsigned32,
                chasSupervisionRfsDfFlashSize     Unsigned32,
                chasSupervisionRfsDfUsbFree       Unsigned32,
                chasSupervisionRfsDfUsbSize       Unsigned32
        }

chasSupervisionRfsDfSlot OBJECT-TYPE
        SYNTAX          Integer32 (1..16)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
        "CMM Slot where flash space is evaluated."
        ::= { chasSupervisionRfsDfEntry 1}

chasSupervisionRfsDfFlashFree OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "Number bytes free on the file system."
        ::= { chasSupervisionRfsDfEntry 2}

chasSupervisionRfsDfFlashSize OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "Number of total bytes on the file system."
        ::= { chasSupervisionRfsDfEntry 3}

chasSupervisionRfsDfUsbFree OBJECT-TYPE
        SYNTAX          Unsigned32
        UNITS           "kb"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "The amount of free space on the USB file system."
        ::= { chasSupervisionRfsDfEntry 4}

chasSupervisionRfsDfUsbSize OBJECT-TYPE
        SYNTAX          Unsigned32
        UNITS           "kb"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "The total amount of space on the USB file system."
        ::= { chasSupervisionRfsDfEntry 5}

chasSupervisionFlashMemTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ChasSupervisionFlashMemEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "This table contains the systems flash memory information."
        ::= { alcatelIND1ChassisMIBObjects 9 }

chasSupervisionFlashMemEntry OBJECT-TYPE
    SYNTAX          ChasSupervisionFlashMemEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "This contains one entry for the flash memory table."
    INDEX { chasSupervisionSlot }
        ::= { chasSupervisionFlashMemTable 1 }

ChasSupervisionFlashMemEntry ::= SEQUENCE
        {
                chasSupervisionSlot          Integer32,
                chasSupervisionFlashSize     Unsigned32,
                chasSupervisionFlashFree     Unsigned32,
                chasSupervisionFlashUsed     Integer32
        }

chasSupervisionSlot OBJECT-TYPE
    SYNTAX          Integer32 (1..16)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "CMM Slot where flash space is evaluated."
        ::= { chasSupervisionFlashMemEntry 1}

chasSupervisionFlashSize OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Flash memory size."
        ::= { chasSupervisionFlashMemEntry 2}

chasSupervisionFlashFree OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Number bytes free on file system."
        ::= { chasSupervisionFlashMemEntry 3}

chasSupervisionFlashUsed OBJECT-TYPE
    SYNTAX          Integer32 (0..100)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A rounded up percentage of Flash Memory used."
        ::= { chasSupervisionFlashMemEntry 4}


chasSupervisionCmmCertifiedTable OBJECT-TYPE
    SYNTAX SEQUENCE OF ChasSupervisionCmmCertifiedEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "This table contains certification status"
        ::= { alcatelIND1ChassisMIBObjects 10 }

chasSupervisionCmmCertifiedEntry OBJECT-TYPE
    SYNTAX          ChasSupervisionCmmCertifiedEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
         "Information about control module certification status.  This class is
         instanciated only when running in virtual chassis mode."
        INDEX { chasSupervisionCmmNum }
        ::= { chasSupervisionCmmCertifiedTable 1 }

ChasSupervisionCmmCertifiedEntry ::= SEQUENCE
        {
                chasSupervisionCmmNum Integer32,
                chasSupervisionCmmCertifiedStatus INTEGER
        }

chasSupervisionCmmNum OBJECT-TYPE
    SYNTAX          Integer32 (1..16)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "CMM Slot where /certified directory is evaluated."
        ::= { chasSupervisionCmmCertifiedEntry 1}

chasSupervisionCmmCertifiedStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                notPresent(0),
                yes(1),
                no(2)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        " The status of the CMM certified directory - certified or not."
        ::= { chasSupervisionCmmCertifiedEntry 2}


-- CHASSIS SUPERVISION FAN STATUS TABLE

alaChasEntPhysFanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AlaChasEntPhysFanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table contains one row per physical fan entity."
        ::= { alcatelIND1ChassisMIBObjects 11 }

alaChasEntPhysFanEntry OBJECT-TYPE
        SYNTAX      AlaChasEntPhysFanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Information about a particular fan in a chassis physical entity."
        INDEX { entPhysicalIndex, alaChasEntPhysFanLocalIndex }
        ::= { alaChasEntPhysFanTable 1 }

AlaChasEntPhysFanEntry ::= SEQUENCE
        {
            alaChasEntPhysFanLocalIndex    Integer32,
            alaChasEntPhysFanStatus        INTEGER,
            alaChasEntPhysFanAirflow       INTEGER,
            alaChasEntPhysFanSpeed         Unsigned32
        }

alaChasEntPhysFanLocalIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS      not-accessible
        STATUS      current
        DESCRIPTION
            "Index to a chassis fan entity"
        ::={ alaChasEntPhysFanEntry 1 }

alaChasEntPhysFanStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noStatus(0),
                        notRunning(1),
                        running(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Chassis fan operational status"
        ::={alaChasEntPhysFanEntry 2}

alaChasEntPhysFanAirflow OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        frontToRear(0),
                        rearToFront(1),
                        notApplicable(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Chassis fan airflow direction"
        ::={alaChasEntPhysFanEntry 3}

alaChasEntPhysFanSpeed OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "rpm"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Chassis fan speed."
        ::={alaChasEntPhysFanEntry 4}

-- CHASSIS SUPERVISION RFS COMMANDS


alcatelIND1ChassisSupervisionRfsCommands OBJECT-IDENTITY
        STATUS current
    DESCRIPTION
        "Branch For Chassis Supervision RFS commands.
         For rrm command the Slot, Command and SrcFileName are mandatory.
         For rcp command the Slot, Command, SrcFileName and DestFileName
         are mandatory.  For rdf command the Slot and Command are mandatory"
        ::= { alcatelIND1ChassisMIBObjects 5 }

chasSupervisionRfsCommandsSlot OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     "CMM Slot where RFS command should be executed."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 1}

chasSupervisionRfsCommandsCommand OBJECT-TYPE
        SYNTAX          INTEGER {
                                notSignificant(0),
                                rrm(1),
                                rcp(2),
                                rls(3),
                                rdf(4),
                                rget(5),
                                rput(6),
                                reserved(7)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
        "This object identifies which of the above Actions is to be
         performed.  The commands are as follows:
                  - rrm   Remote file remove
                  - rcp   Remote file copy (DEPRECATED please use rget or rput instead)
                  - rls   Remote directory listing
                  - rdf   Remote flash disk space free
                  - rget  Remote file get
                  - rput  Remote file put"

        ::= { alcatelIND1ChassisSupervisionRfsCommands 2 }


chasSupervisionRfsCommandsSrcFileName OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..255))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
        "The remote file for where the RFS action is executed.
         This includes also the path so directory name and file name.
         This object is used when command set to rrm or rget or rput."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 3 }

chasSupervisionRfsCommandsDestFileName OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..255))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "The destination file for where the RFS action is executed.
                 This includes also the path so directory name and file name.
                 This object is used when command set to rget or rput."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 4 }

chasSupervisionRfsCommandsRlsDirName OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..255))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
               "The remote directory name where remote file is located in.
                This is used when command set to rls."
        DEFVAL { "/flash" }
        ::= { alcatelIND1ChassisSupervisionRfsCommands 5 }

chasSupervisionRfsCommandsRlsFileName OBJECT-TYPE
        SYNTAX          SnmpAdminString (SIZE (0..255))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
               "The remote file name where remote file is located in.
                This is used when command set to rls."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 6 }

chasSupervisionRfsCommandsProcessingState OBJECT-TYPE
        SYNTAX          INTEGER {
                                    inProgress(1),
                                    ready(2)
                    }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "command executing state for the previous set operation."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 7 }

chasSupervisionRfsCommandsStatusCode OBJECT-TYPE
        SYNTAX          INTEGER {
                        success(1),
                        slotIsPrimary(2),
                        slotNotExist(3),
                        directoryNotExist(4),
                        fileNotExist(5),
                        maximumFilesExceed(6),
                        noDiskSpace(7),
                        systemBusy(8),
                        systemError(9),
                        directoryNotAllowToRemove(10),
                        permissionDenied(11)
                    }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "command completetion status error code."
        ::= { alcatelIND1ChassisSupervisionRfsCommands 8 }


-- CHASSIS CONTROL RELOAD STATUS


chasControlReloadStatusTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF ChasControlReloadEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "Table containing reload status of each network interface
                         slot or stack module"
::= { alcatelIND1ChassisMIBObjects 6 }

chasControlReloadEntry OBJECT-TYPE
        SYNTAX          ChasControlReloadEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "Entry of a network interface reload status"
        INDEX { chasControlReloadIndex }
::={ chasControlReloadStatusTable 1 }

ChasControlReloadEntry ::= SEQUENCE {
        chasControlReloadIndex          Integer32,
        chasControlReloadStatus         INTEGER
}

chasControlReloadIndex OBJECT-TYPE
        SYNTAX          Integer32 (1..64)
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The index (entPhsycialIndex) value of the network interface."
        ::= { chasControlReloadEntry 1 }

chasControlReloadStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                reloadEnabled(1),
                reloadDisabled(2),
                noInterface(3),
                unknown(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "Returned value indicates if the network interface module is
         enabled or disabled for reload."
        DEFVAL { reloadDisabled }
::= { chasControlReloadEntry 2 }


-- CHASSIS GLOBAL CONTROL OBJECTS


    chasGlobalControl   OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 7 }

chasGlobalControlDelayedResetAll OBJECT-TYPE
        SYNTAX Integer32 (-1..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "This object is used to schedule a delayed reset all action for
        a standalone chassis or for the entire virtual chassis when running
        is virtual chassis mode. To schedule a delayed reset on a specific
        chassis when running is virtual chassis mode, use the
        chasControlDelayedResetAll object for the desired chassis.
        If set to -1 - cancel the timer, 0 - reset all immediately,
        any other value will start counting down the time until reset."

    DEFVAL { -1 }
::= { chasGlobalControl 1 }

chasGlobalControlLongCommand OBJECT-TYPE
        SYNTAX INTEGER
        {
                none(1),
                certifySynchro(2),
                certifyNoSynchro(3),
                flashSynchro(4),
                restore(5),
                reload(6),
                rfs(7),
                issu(8),
                shutdown(9),
                vcConvert(10),
                macRelease(11)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object is used to indicate whether a long-term action
        is in progress, and if so, what the action is."
    DEFVAL { none }
::= { chasGlobalControl 2 }

chasGlobalControlLongCommandStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                none(1),
                inProgress(2),
                completeSuccess(3),
                completeFailure(4),
                confirmationRequired(5)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object indicates the final disposition of the
        most recent long-term action. When  running in virtual
        chassis mode, the value confirmationRequired(5),
        indicates that the command identified in
        chasGlobalControlLongCommand may disrupt the virtual
        chassis. The command is suspended and requires that
        chasClobalControlConfirmOperation be set to true, after
        reviewing the details and accepting the consequences
        identified by chasGlobalControlConfirmMessage."
    DEFVAL { none }
::= { chasGlobalControl 3 }

chasGlobalControlUpdateFirmware OBJECT-TYPE
        SYNTAX INTEGER
        {
                none(1),
                ubootCmm(2),
                ubootNi(3),
                ubootNiAll(4),
                ubootCmmAll(5),
                fpgaCmm(6),
                fpgaNi(7),
                fpgaNiDaughterBoard1(8),
                fpgaNiDaughterBoard2(9),
                fpgaCmmAll(10),
                fpgaCmmPower(11),
                fpgaNiPower(12)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "This object initiates a firmware update. The chasGlobalControlUpdateSlot
         and chasGlobalControlUpdateFilename objects must be set prior to setting
         this object to start the update. The progress of the update can be
         monitored by reading chasGlobalControlUpdateStatus."
    DEFVAL { none }
::= { chasGlobalControl 4 }

chasGlobalControlUpdateSlot OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "This object identifies the slot to be updated. The Slot value is
        the entPhysicalIndex of the NI or CMM entry in the entPhyscialTable.
        A value of 0 may be specified to update all NIs or CMMs. The value
        of 0 is supported only for uboot updates."
::= { chasGlobalControl 5 }

chasGlobalControlUpdateFilename OBJECT-TYPE
        SYNTAX SnmpAdminString (SIZE (0..255))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "This object identifies the filename containing the uboot
         firmware image."
        DEFVAL { "" }
::= { chasGlobalControl 6 }

chasGlobalControlUpdateStatus OBJECT-TYPE
        SYNTAX INTEGER
        {
                noUpdate(1),
                updateInProgress(2),
                updateSuccess(3),
                updateFailed(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "This object reports the status of the firmware update.
         The status for the the update identified by
         chasGlobalControlUpdateFirmware and chasGlobalControlUpdateSlot
         is returned. When ubootNiAll(4) ubootCmmAll(5) or fpgaCmmAll(10) update is
         executed, the status of individual NIs or CMMs may be monitored
         by changing the value of chasGlobalControlUpdateSlot to the
         desired NI or CMM slot value prior to reading the status.
         noUpdate(1) - No firmware update has been initiated.
         updateInProgress(2) - Update is in progress.
         updateSuccess(3) - The last firmware update was successful.
         updateFailed(4) - The last firmware update failed."
    DEFVAL { noUpdate }
::= { chasGlobalControl 7 }

chasGlobalControlConfirmOperation OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "When operating in virtual chassis mode, this object can
        be set to true(1) to confirm that the operation identified
        by chasGlobalControlLongCommand can proceed.  Set to false(2)
        to cancel the operation. This should only be used when
        chasGlobalControlLongCommandStatus is set to
        confirmationRequired(5), and the value of
        chasGlobalControlConfirmMessage has been reviewed."
::= { chasGlobalControl 8 }

chasGlobalControlConfirmMessage OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "When operating in virtual chassis mode, this object may be read
         when chasGlobalControlLongCommandStatus is set to
         confirmationRequired(5). This will happen when an operation such a
         reload may disrupt the virtual chassis. This object contains information
         about the consequences of executing the command identified by
         chasGlobalControlLongCommand. The command has been suspended. To
         accept the consequences and proceed with the operation, set
         chasGlobalControlConfirmOperation to true."
::= { chasGlobalControl 9 }

alaChasBpsObjects OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 14 }


  alaChasBpsFwTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaChasBpsFwEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "This table contains one row per shelf bps firrmware "
    ::= { alaChasBpsObjects 1 }

  alaChasBpsFwEntry OBJECT-TYPE
    SYNTAX     AlaChasBpsFwEntry 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Information about a bps firrmare" 
    INDEX { alaChasBpsShelfId } 
    ::= { alaChasBpsFwTable 1 }

    AlaChasBpsFwEntry ::= SEQUENCE
    {
            alaChasBpsShelfId           AlaChasBpsShelfId,
            alaChasBpsUpdateFirmware    INTEGER, 
            alaChasBpsCpldRev           Integer32,
            alaChasBpsMmcuRev           Integer32,
            alaChasBpsCmcuRev           Integer32
    }

  alaChasBpsShelfId OBJECT-TYPE
    SYNTAX       AlaChasBpsShelfId 
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
    "Bps shelf ID "
    ::= { alaChasBpsFwEntry 1 }

  alaChasBpsUpdateFirmware OBJECT-TYPE
        SYNTAX      INTEGER
        {
            disabled(1),
            enabled(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
        "This object is used to start BPS firmware update."
        DEFVAL { disabled }
       ::= { alaChasBpsFwEntry 2 }

    alaChasBpsCpldRev               OBJECT-TYPE
        SYNTAX          Integer32(0..100)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "This object contains the CPLD revision Number of the  BPS"
        ::= { alaChasBpsFwEntry 3 }

    alaChasBpsMmcuRev OBJECT-TYPE
        SYNTAX          Integer32(0..100)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "This object contains the MMCU revision Number of the  BPS"
        ::= { alaChasBpsFwEntry 4 }

    alaChasBpsCmcuRev OBJECT-TYPE
        SYNTAX          Integer32(0..100)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
        "This object contains the CMCU revision Number of the  BPS"
        ::= { alaChasBpsFwEntry 5 }

--
-- Connector Priority Table 
---

  alaChasBpsConnectorPriorityTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF AlaChasBpsConnectorPriorityEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "This table contains BPS connector priority for each slot"
    ::= { alaChasBpsObjects 2 }

  alaChasBpsConnectorPriorityEntry OBJECT-TYPE
    SYNTAX          AlaChasBpsConnectorPriorityEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "Information about bps connector priority for each slot"
    INDEX { alaChasBpsChassisId }
    ::= {alaChasBpsConnectorPriorityTable 1 }

    AlaChasBpsConnectorPriorityEntry ::= SEQUENCE
    {
        alaChasBpsChassisId           Integer32,
        alaChasBpsConnectorShelfId    AlaChasBpsShelfId,
        alaChasBpsConnectorPriority   Integer32,
        alaChasBpsConnectorNum        Integer32, 
        alaChasBpsSerialNum           SnmpAdminString
    }
  alaChasBpsChassisId OBJECT-TYPE
    SYNTAX          Integer32(1..8)
    MAX-ACCESS      not-accessible 
    STATUS          current
    DESCRIPTION "Numbers allocated for the stack NIs as follows:
    - 1..8:       valid and assigned slot numbers corresponding to values from the entPhysicalTable"
    ::= { alaChasBpsConnectorPriorityEntry 1 }


  alaChasBpsConnectorShelfId OBJECT-TYPE
    SYNTAX          AlaChasBpsShelfId 
    MAX-ACCESS      read-only 
    STATUS          current
    DESCRIPTION
    "Bps shelf ID "
    ::= { alaChasBpsConnectorPriorityEntry 2  }


  alaChasBpsConnectorPriority OBJECT-TYPE
    SYNTAX          Integer32(0..8)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION "This object specifies the bps connector priority."
    DEFVAL { 0 }
    ::= { alaChasBpsConnectorPriorityEntry 3 }

  alaChasBpsConnectorNum OBJECT-TYPE
    SYNTAX          Integer32(0..7)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION "This object specifies the bps connector num."
    ::= { alaChasBpsConnectorPriorityEntry 4 }

  alaChasBpsSerialNum OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE(0..14)) 
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION "This object specifies the bps serial num."
    ::= { alaChasBpsConnectorPriorityEntry 5 }

    --
    -- Bps Mode Table 
    --
  alaChasBpsModeTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF AlaChasBpsModeEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "This table contains one row for bps config parameters."
    ::= { alaChasBpsObjects 3 }

  alaChasBpsModeEntry OBJECT-TYPE
    SYNTAX          AlaChasBpsModeEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    " Information about bps mode"
    INDEX  { alaChasBpsShelfId }
    ::= { alaChasBpsModeTable 1 }

    AlaChasBpsModeEntry ::= SEQUENCE
    {
         alaChasBpsMode       INTEGER
    }

  alaChasBpsMode OBJECT-TYPE
    SYNTAX      INTEGER
    {
            single(1),
            full(2),
            notApplicable(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "This object is only applicable to BPS .Value is
    used to specify current Mode of switch."
    DEFVAL { single }
    ::= { alaChasBpsModeEntry 1 }


--
--  BPS Power supplies  Table
--

  alaChasBpsPowerSupplyTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF AlaChasBpsPowerSupplyEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "This table contains   BPS power supplies details"
     ::= {alaChasBpsObjects 4}

  alaChasBpsPowerSupplyEntry OBJECT-TYPE
    SYNTAX          AlaChasBpsPowerSupplyEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "Information about a particular  BPS power supply"
    INDEX { alaChasBpsPowerSupplyShelfId, alaChasBpsPowerSupplyIndex }
    ::= { alaChasBpsPowerSupplyTable 1 }

    AlaChasBpsPowerSupplyEntry ::= SEQUENCE
    {
        alaChasBpsPowerSupplyShelfId     AlaChasBpsShelfId,
        alaChasBpsPowerSupplyIndex       Integer32,
        alaChasBpsPowerSupplyName        SnmpAdminString,
        alaChasBpsPowerSupplyDescr       SnmpAdminString,
        alaChasBpsPowerSupplyModuleType  SnmpAdminString,
        alaChasBpsPowerSupplyPartNumber  SnmpAdminString,
        alaChasBpsPowerSupplyHardwareRev SnmpAdminString,
        alaChasBpsPowerSupplySerialNum   SnmpAdminString,
        alaChasBpsPowerSupplyMfgDate     SnmpAdminString,
        alaChasBpsPowerSupplyOperStatus  INTEGER,
        alaChasBpsPowerSupplyPowerProv   Integer32
    }

  alaChasBpsPowerSupplyShelfId    OBJECT-TYPE
    SYNTAX          AlaChasBpsShelfId 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "BPS shelf ID"
    ::= { alaChasBpsPowerSupplyEntry 1 }


  alaChasBpsPowerSupplyIndex OBJECT-TYPE
    SYNTAX          Integer32(1..6)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "This value hold BPS power power supply Index"
    ::= { alaChasBpsPowerSupplyEntry 2 }

  alaChasBpsPowerSupplyName  OBJECT-TYPE
    SYNTAX          SnmpAdminString(SIZE(0..63))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This object hold name of BPS power supply"
    ::= { alaChasBpsPowerSupplyEntry 3 }

  alaChasBpsPowerSupplyDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString(SIZE(0..63))
    MAX-ACCESS      read-only
    STATUS           current
    DESCRIPTION
    "This object hold description of BPS power supply"
    ::= { alaChasBpsPowerSupplyEntry 4 }

  alaChasBpsPowerSupplyModuleType OBJECT-TYPE
    SYNTAX          SnmpAdminString(SIZE(0..31))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This object is unique module Type or ID from BPS entities eeprom"
    ::= { alaChasBpsPowerSupplyEntry 5 }

  alaChasBpsPowerSupplyPartNumber OBJECT-TYPE
    SYNTAX          SnmpAdminString(SIZE(0..16))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This object contains the BPS power supply  Part Number "
    ::= {   alaChasBpsPowerSupplyEntry 6 }

  alaChasBpsPowerSupplyHardwareRev OBJECT-TYPE
    SYNTAX      SnmpAdminString(SIZE(0..8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The vendor-specific hardware revision string for the
    BPS  power supplies
    Note that if revision information is stored internally in a
    non-printable (e.g., binary) format, then the agent must
    convert such information to a printable format, in an
    implementation-specific manner.

    If no specific hardware revision string is associated with
    the physical component, or this information is unknown to
    the agent, then this object will contain a zero-length
    string."
    ::= { alaChasBpsPowerSupplyEntry 7 }

  alaChasBpsPowerSupplySerialNum OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE (0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The vendor-specific serial number string for the
    BPS power supplies"
    ::= { alaChasBpsPowerSupplyEntry 8 }

  alaChasBpsPowerSupplyMfgDate OBJECT-TYPE
    SYNTAX      SnmpAdminString (SIZE(0..11))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "This object contains the manufacturing date of the BPS power supplies .
    Its format is mmm dd yyyy : NOV 27 2012."
    ::= { alaChasBpsPowerSupplyEntry 9 }

    alaChasBpsPowerSupplyOperStatus OBJECT-TYPE
    SYNTAX    INTEGER
    {
        up(1),
        down(2),
        unknown(3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "Oper status of  BPS power supply"
    ::= { alaChasBpsPowerSupplyEntry 10 }

  alaChasBpsPowerSupplyPowerProv OBJECT-TYPE
    SYNTAX      Integer32(0..2000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    " It corresponds to  max power  of  BPS power supply.
    This value is in Watts."
    ::= { alaChasBpsPowerSupplyEntry 11 }

--
--BPS Total Power allocation Table
--

  alaChasBpsTotalPowerAllocTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AlaChasBpsTotalPowerAllocEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "This table contains one row for parameters which reflect total allocation by BPS ."
    ::= { alaChasBpsObjects 5 }

  alaChasBpsTotalPowerAllocEntry  OBJECT-TYPE
    SYNTAX  AlaChasBpsTotalPowerAllocEntry 
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
    " Information about various bps config parameters"
    INDEX  { alaChasBpsShelfId }
    ::= { alaChasBpsTotalPowerAllocTable 1 }

    AlaChasBpsTotalPowerAllocEntry ::= SEQUENCE
    {
        alaChasBpsSysTotalAvailablePower   Integer32,
        alaChasBpsSysTotalAllocation       Integer32,
        alaChasBpsPoeTotalAvailablePower   Integer32,
        alaChasBpsPoeTotalAllocation       Integer32
    }

  alaChasBpsSysTotalAvailablePower OBJECT-TYPE
    SYNTAX          Integer32(0..900)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This value is only applicable to the BPS Module.  It
    corresponds to system total power available on BPS
    This value is in Watts."
    ::= {  alaChasBpsTotalPowerAllocEntry 1 }

  alaChasBpsSysTotalAllocation OBJECT-TYPE
    SYNTAX          Integer32(0..900)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This value is only applicable to the BPS Modules.  It
    corresponds to  total system  power allocated by  BPS
    This value is in Watts."
    ::= {  alaChasBpsTotalPowerAllocEntry 2 }

  alaChasBpsPoeTotalAvailablePower OBJECT-TYPE
    SYNTAX          Integer32(0..6000)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This value is only applicable to the  BPS Modules.  It
    corresponds to system total power available on BPS
    This value is in Watts."
    ::= {  alaChasBpsTotalPowerAllocEntry 3 }

  alaChasBpsPoeTotalAllocation OBJECT-TYPE
    SYNTAX          Integer32(0..6000)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "This value is only applicable to the Bps Modules.  It
    corresponds to  total POE  power allocated by  BPS
    This value is in Watts."
    ::= {  alaChasBpsTotalPowerAllocEntry 4 }


--
--Chassis traps mib : chassisTraps
--

--Chassis traps Object definition

chassisTrapsObj  OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 13 }

--
--textual conventions
--

ChassisTrapsStrLevel ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "enumerated value which provide the
        urgency level of the STR."
    SYNTAX        INTEGER {
                          strNotFatal           (1), --recorverable
                          strApplicationFatal   (2), --not recorverable for the application
                          strFatal              (3)  --not recorverable for the board
                  }


ChassisTrapsStrAppID  ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Application Identification number"
    SYNTAX        Integer32 (0..255)


ChassisTrapsStrSnapID  ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Subapplication Identification number.
        we can have multiple snapIDs per
        Subapplication (task) but only one is
        to be used to send STRs."
    SYNTAX        Integer32 (0..255)


ChassisTrapsStrfileLineNb ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Line number in the source file where the
        fault was detected. This is given by the C
        ANSI macro __LINE__."
    SYNTAX        Integer32 (1..65535)


ChassisTrapsStrErrorNb ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Fault identifier. The error number
        identifies the kind the detected fault and
        allows a mapping of the data contained in
        chassisTrapsdataInfo."
    SYNTAX        Integer32 (0..65535)


ChassisTrapsStrdataInfo ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "Additional data provided to help to find out
        the origine of the fault. The contain and the
        significant portion are varying in accordance
        with chassisTrapsStrErrorNb. The lenght of this
        field is expressed in bytes."
    SYNTAX  OCTET STRING (SIZE (0..63))

ChassisTrapsObjectType ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "An enumerated value which provides the object type
        involved in the alert trap."
    SYNTAX        INTEGER {
        chassis           (1),
        ni                (2),
        powerSuply        (3),
        fan               (4),
        cmm               (5),
        fabric            (6),
        gbic              (7)
    }


ChassisTrapsObjectNumber ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "A number defining the order of the object in the
        set. EX: The number of the considered fan or power
        supply. This intend to clarify as much as possible
        the location of the failure or alert. An instance
        of the appearance of the trap could be:
        failure on a module. Power supply 3.  "
    SYNTAX        Integer32 (0..255)

ChassisTrapsAlertNumber ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "this number identify the alert among all the
        possible chassis alert causes."
    SYNTAX        INTEGER {
        runningWorking                  (1),   -- The working version is used
        runningCertified                    (2),   -- The certified version is used

        certifyStarted                  (3),   -- CERTIFY process started
        certifyFlashSyncStarted         (4),   -- CERTIFY w/FLASH SYNCHRO process started
        certifyCompleted                (5),   -- CERTIFY process completed successfully
        certifyFailed                   (6),   -- CERTIFY process failed
        synchroStarted                  (7),   -- Flash Synchronization process started
        synchroCompleted                    (8),   -- Flash Synchronization completed successfully
        synchroFailed                   (9),   -- Flash Synchronization failed

        restoreStarted                  (10),   -- RESTORE process started
        restoreCompleted                    (11),   -- RESTORE process completed successfully
        restoreFailed                   (12),   -- RESTORE process failed

        takeoverStarted                 (13),   -- CMM take-over being processed
        takeoverDeferred                    (14),   -- CMM take-over deferred
        takeoverCompleted                   (15),   -- CMM take-over completed

        macAllocFailed                  (16),   -- CMS MAC allocation failed
        macRangeFailed                  (17),   -- CMS MAC range addition failed

        fanFailed                           (18),   -- One or more of the fans is inoperable
        fanOk                               (19),   -- Fan is operable
        fansOk                              (20),   -- All fans are operable

        tempOverThreshold                   (21),   -- CMM temperature over the threshold
        tempUnderThreshold                  (22),   -- CMM temperature under the threshold
        tempOverDangerThreshold         (23),   -- CMM temperature over danger threshold

        powerMissing                    (24),   -- Not enough power available
        psNotOperational                    (25),   -- Power Supply is not operational
        psOperational                   (26),   -- Power supply is operational
        psAllOperational                    (27),   -- All power supplies are operational

        redundancyNotSupported          (28),   -- Hello protocol disabled, Redundancy not supported
        redundancyDisabledCertifyNeeded (29),   -- Hello protocol disabled, Certify needed
        cmmStartingAsPrimary            (30),   -- CMM started as primary
        cmmStartingAsSecondary          (31),   -- CMM started as secondary
        cmmStartupCompleted                 (32),   -- end of CMM start up

        cmmAPlugged                         (33),   -- cmm a plugged
        cmmBPlugged                         (34),   -- cmm b plugged
        cmmAUnPlugged                   (35),   -- cmm a unplugged
        cmmBUnPlugged                   (36),   -- cmm b unplugged

        lowNvramBattery                 (37),   -- NV RAM battery is low
        notEnoughFabricsOperational     (38),   -- Not enough Fabric boards operational
        simplexNoSynchro                    (39),   -- Only simplex CMM no flash synchro done

        secAutoActivate                 (40),   -- secondary CMM autoactivating
        secAutoCertifyStarted           (41),   -- secondary CMM autocertifying
        secAutoCertifyCompleted         (42),   -- secondary CMM autocertify end
        secInactiveReset                (43),   -- cmm b unplugged

        activateScheduled               (44),   -- ACTIVATE process scheduled
        activateStarted                 (45),   -- secondary CMM reset because of inactivity

        getAfileCompleted               (46),   -- Get A file process completed
        getAfileFailed                  (47),   -- Failed to get a file from other CMM/Stack

        sysUpdateStart                  (48),   -- sysUpdate starts
        sysUpdateInProgress             (49),   -- sysUpdate in progress
        sysUpdateError                  (50),   -- sysUpdate error
        sysUpdateEnd                    (51),   -- sysUpdate ends
        reloadInProgress                (52),   -- the system is already in reload workign process
        c20UpgradeOk                    (53),   -- the c20 license upgrade ok
        c20UpgradeFailed                (54),   -- the c20 license upgrade failed
        c20RestoreOk                    (55),   -- the c20 license restore ok
        c20RestoreFailed                (56),   -- the c20 license restore failed
        c20NiFailed                     (57),   -- the c20 ni board reports failure
        airflowReverse                  (58),   -- ps and fan have opposit air flow direction
        tempSWHigh                      (59),   -- the cmm/ni temperature is over SW high level
        tempHWHigh                      (60),   -- the cmm/ni temperature is over HW high level
        tempDanger                      (61),   -- the cmm/ni temperature is over HW danger set level
        imageFileChecksumChanged        (62)    -- the image file MD5 checksum has changed
    }

--
--object i.e. trap description
--

chassisTrapsStr NOTIFICATION-TYPE
    OBJECTS {
        chassisTrapsStrLevel            ,
        chassisTrapsStrAppID            ,
        chassisTrapsStrSnapID           ,
        chassisTrapsStrfileName         ,
        chassisTrapsStrfileLineNb       ,
        chassisTrapsStrErrorNb          ,
        chassisTrapsStrcomments         ,
        chassisTrapsStrdataInfo
    }
    STATUS        current
    DESCRIPTION
       "A Software Trouble report is sent by whatever application
        encountering a problem during its execution and would
        want to aware the user of for maintenance purpose.      "
::= { alcatelIND1ChassisMIBNotifications 1 }

chassisTrapsAlert NOTIFICATION-TYPE
    OBJECTS {
        physicalIndex                   ,
        chassisTrapsObjectType          ,
        chassisTrapsObjectNumber        ,
        chassisTrapsAlertNumber         ,
        chassisTrapsAlertDescr
    }
    STATUS        current
    DESCRIPTION
       "generic trap notifying something changed in the chassis
        whatever it's a failure or not                          "
::= { alcatelIND1ChassisMIBNotifications 2 }


chassisTrapsStateChange NOTIFICATION-TYPE
    OBJECTS {
        physicalIndex                   ,
        chassisTrapsObjectType          ,
        chassisTrapsObjectNumber        ,
        chasEntPhysOperStatus
    }
    STATUS        current
    DESCRIPTION
       "A status change was detected"
::= { alcatelIND1ChassisMIBNotifications 3 }

-- BPS related traps 
--
-- Ni specific

  chasTrapsBPSLessAllocSysPwr NOTIFICATION-TYPE
    OBJECTS 
    {
         physicalIndex,
         chasTrapsNiRqstdBpsSysPower,
         chasTrapsNiGrantdBpsSysPower
    }
    STATUS        current
    DESCRIPTION
    "Insufficient system power given by BPS"
    ::= { alcatelIND1ChassisMIBNotifications 4 }

-- Complete shelf specific
  chasTrapsBPSStateChange NOTIFICATION-TYPE
    OBJECTS 
    {
            chasTrapBPSShelfId, 
            chasTrapsBPSPowerSupply,
            chasTrapsBPSEventAlert
    }
    STATUS        current
    DESCRIPTION
    "BPS power supplies insertion/removal  trap"
    ::= { alcatelIND1ChassisMIBNotifications 5 }


-- specific to connector
  chasTrapsNiBPSFETStateChange NOTIFICATION-TYPE
    OBJECTS 
    {
            physicalIndex,
            chasTrapsBPSSystemFETChange,
            chasTrapsBPSPoeFETChange
    }
    STATUS        current
    DESCRIPTION
    "BPS power supplies FET state change  trap"
    ::= { alcatelIND1ChassisMIBNotifications 6 }

  chasTrapsBPSFwUpgradeAlert NOTIFICATION-TYPE
    OBJECTS 
    {
            chasTrapBPSShelfId, 
            chasTrapsBPSFwType,
            chasTrapsBPSFwVersion
    }
    STATUS        current
    DESCRIPTION
    "BPS FW upgrade requirment alert trap"
    ::= { alcatelIND1ChassisMIBNotifications 7 }

-- BPS related traps  end

-- objects used in the traps.
--
chassisTrapsStrLevel    OBJECT-TYPE
        SYNTAX                  ChassisTrapsStrLevel
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "An enumerated value which provides the
        urgency level of the STR."
        ::= {chassisTrapsObj 1}

chassisTrapsStrAppID    OBJECT-TYPE
        SYNTAX                  ChassisTrapsStrAppID
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Application Identification number"
        ::= {chassisTrapsObj 2}

chassisTrapsStrSnapID   OBJECT-TYPE
        SYNTAX                  ChassisTrapsStrSnapID
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Subapplication Identification number.
        we can have multiple snapIDs per
        Subapplication (task) but only one is
        to be used to send STRs."
        ::= {chassisTrapsObj 3}

chassisTrapsStrfileName    OBJECT-TYPE
        SYNTAX                  SnmpAdminString(SIZE(0..19))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Name of the source file where the fault
        was detected. This is given by the C ANSI
        macro __FILE__. The path shouldn't appear."
        ::= {chassisTrapsObj 4}

chassisTrapsStrfileLineNb    OBJECT-TYPE
        SYNTAX                  ChassisTrapsStrfileLineNb
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Line number in the source file where the
        fault was detected. This is given by the C
        ANSI macro __LINE__."
        ::= {chassisTrapsObj 5}

chassisTrapsStrErrorNb    OBJECT-TYPE
        SYNTAX                  ChassisTrapsStrErrorNb
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Fault identificator. The error number
        identify the kind the detected fault and
        allow a mapping of the data contained in
        chassisTrapsdataInfo."
        ::= {chassisTrapsObj 6}

chassisTrapsStrcomments    OBJECT-TYPE
        SYNTAX                  SnmpAdminString(SIZE(0..63))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "comment text explaning the fault."
        ::= {chassisTrapsObj 7}

chassisTrapsStrdataInfo    OBJECT-TYPE
        SYNTAX                  ChassisTrapsStrdataInfo
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "Additional data provided to help to find out
        the origine of the fault. The contain and the
        significant portion are varying in accordance
        with chassisTrapsStrErrorNb. The lenght of this
        field is expressed in bytes."
        ::= {chassisTrapsObj 8}

chassisTrapsObjectType    OBJECT-TYPE
        SYNTAX                  ChassisTrapsObjectType
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "enumerated value which provide the object type
        involved in the alert trap."
        ::= {chassisTrapsObj 9}

chassisTrapsObjectNumber    OBJECT-TYPE
        SYNTAX                  ChassisTrapsObjectNumber
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "number defining the order of the object in the
        set. EX: number of the considered fan or power
        supply. This intend to clarify as much as possible
        the location of the failure or alert. A instance
        of the appearance of the trap could be:
        failure on a module. Power supply 3.  "
        ::= {chassisTrapsObj 10}

chassisTrapsAlertNumber    OBJECT-TYPE
        SYNTAX                  ChassisTrapsAlertNumber
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "this number identify the alert among all the
        possible chassis alert causes."
        ::= {chassisTrapsObj 11}

chassisTrapsAlertDescr    OBJECT-TYPE
        SYNTAX                  SnmpAdminString(SIZE(0..127))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
        "description of the alert matching chassisTrapsAlertNumber"
        ::= {chassisTrapsObj 12}

physicalIndex             OBJECT-TYPE
    SYNTAX                      PhysicalIndex
    MAX-ACCESS                  read-only
    STATUS                      current
    DESCRIPTION
    "The Physical index of the involved object."
    ::= { chassisTrapsObj 13 }

--BPS Traps objects
  chasTrapsNiRqstdBpsSysPower OBJECT-TYPE
    SYNTAX          Integer32(0..126)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "Requested system power from os-bps"
    ::= { chassisTrapsObj 14 }

  chasTrapsNiGrantdBpsSysPower OBJECT-TYPE
    SYNTAX          Integer32(0..126)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "Granted system power from os-bps"
    ::= { chassisTrapsObj 15 }

  chasTrapBPSShelfId OBJECT-TYPE
    SYNTAX          Integer32(1..3) 
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "Granted system power from os-bps"
    ::= { chassisTrapsObj 16 }

  chasTrapsBPSPowerSupply OBJECT-TYPE
    SYNTAX          ChasTrapsBPSPowerSupply
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "value which provide bps power supply involved in the
    State change trap"
    ::= { chassisTrapsObj 17 }

  chasTrapsBPSEventAlert OBJECT-TYPE
    SYNTAX          ChasTrapsBPSEventAlert
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "enumerated value identifying alert"
    ::= { chassisTrapsObj 18 }

  chasTrapsBPSSystemFETChange OBJECT-TYPE
    SYNTAX          ChasTrapsBPSFetState
    MAX-ACCESS      read-only
    STATUS           current
    DESCRIPTION
    "enumerated value which indicate Fet state"
    ::= { chassisTrapsObj 19 }

  chasTrapsBPSPoeFETChange OBJECT-TYPE
    SYNTAX          ChasTrapsBPSFetState
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
    "enumerated value which indicate Fet state"
    ::= { chassisTrapsObj 20 }

  chasTrapsBPSFwVersion OBJECT-TYPE
    SYNTAX          Integer32(1..99) 
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "enumerated value which indicate the FW that require upgrade"
    ::= { chassisTrapsObj 21 }

  chasTrapsBPSFwType OBJECT-TYPE
    SYNTAX          ChasTrapsBPSFwType
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
    "value which indicate Fet state"
    ::= { chassisTrapsObj 22 }

--BPS Traps objects End

-- END Trap Objects


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    alcatelIND1ChassisMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Chassis Supervision."
        MODULE
            MANDATORY-GROUPS
            {
                chasControlModuleGroup               ,
                chasControlRedundantGroup            ,
                chasChassisGroup                     ,
                chasControlReloadStatusGroup         ,
                chasGlobalControlGroup               ,
                chassisNotificationGroup             ,
                alaChasEntPhysFanGroup               ,
                alaChasNotificationObjectGroup       ,
                chassisSupervisionRfsCommandsGroup   ,
                chasSupervisionCmmCertifiedEntryGroup,
                chasSupervisionFlashMemEntryGroup    ,
                chasSupervisionRfsDfEntryGroup       ,
                chasSupervisionRfsLsEntryGroup,
                alaChasBpsFwGroup,
                alaChasBpsConnectorPriorityGroup,
                alaChasBpsModeGroup,
                alaChasBpsPowerSupplyGroup,
                alaChasBpsTotalPowerAllocGroup
            }

        ::= { alcatelIND1ChassisMIBCompliances 1 }

    alcatelIND1ChassisPhysMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Chassis Supervision Physical."
        MODULE
            MANDATORY-GROUPS
            {
                chasEntPhysicalGroup                 ,
                chassisPhysNotificationGroup
            }

        ::= { alcatelIND1ChassisPhysMIBCompliances 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    chasControlModuleGroup OBJECT-GROUP
        OBJECTS
        {
            chasControlActivateTimeout,
            chasControlVersionMngt,
            chasControlDelayedActivateTimer,
            chasControlCertifyStatus,
            chasControlSynchronizationStatus,
            chasControlAcrossCmmWorkingSynchroStatus,
            chasControlAcrossCmmCertifiedSynchroStatus,
            chasControlNextRunningVersion,
            chasControlCurrentRunningVersion,
            chasControlWorkingVersion,
            chasControlRedundancyTime,
            chasControlEmpIpAddress,
            chasControlEmpIpMask,
            chasControlChassisId

        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 1 }

    chasControlRedundantGroup OBJECT-GROUP
        OBJECTS
        {
            chasControlNumberOfTakeover      ,
            chasControlDelayedRebootTimer    ,
            chasControlDelayedResetAll
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Redundant Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 2 }

    chasChassisGroup OBJECT-GROUP
        OBJECTS
        {
            chasFreeSlots           ,
            chasPowerLeft           ,
            chasNumberOfResets      ,
            chasTempRange           ,
            chasTempThreshold       ,
            chasDangerTempThreshold ,
            chasPrimaryPhysicalIndex,
            chasCPMAHardwareBoardTemp,
            chasCFMAHardwareBoardTemp,
            chasCPMBHardwareBoardTemp,
            chasCFMBHardwareBoardTemp,
            chasCFMCHardwareBoardTemp,
            chasCFMDHardwareBoardTemp,
            chasFTAHardwareBoardTemp,
            chasFTBHardwareBoardTemp,
            chasNI1HardwareBoardTemp,
            chasNI2HardwareBoardTemp,
            chasNI3HardwareBoardTemp,
            chasNI4HardwareBoardTemp,
            chasNI5HardwareBoardTemp,
            chasNI6HardwareBoardTemp,
            chasNI7HardwareBoardTemp,
            chasNI8HardwareBoardTemp,
            chasPowerSupplyRedundancy,
            chasPowerSupplyRedundancyReserve
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Chassis Group."
        ::= { alcatelIND1ChassisMIBGroups 3 }

    chasControlReloadStatusGroup OBJECT-GROUP
        OBJECTS
        {
            chasControlReloadStatus
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision NI Reload Status Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 4 }

    chasGlobalControlGroup OBJECT-GROUP
        OBJECTS
        {
            chasGlobalControlDelayedResetAll,
            chasGlobalControlLongCommand,
            chasGlobalControlLongCommandStatus,
            chasGlobalControlUpdateFirmware,
            chasGlobalControlUpdateSlot,
            chasGlobalControlUpdateFilename,
            chasGlobalControlUpdateStatus,
            chasGlobalControlConfirmOperation,
            chasGlobalControlConfirmMessage
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Global Control Modules Group."
        ::= { alcatelIND1ChassisMIBGroups 5 }

    chassisNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS
        {
            chassisTrapsStr                  ,
            chassisTrapsAlert,
            chasTrapsBPSLessAllocSysPwr,
            chasTrapsBPSStateChange, 
            chasTrapsNiBPSFETStateChange,
            chasTrapsBPSFwUpgradeAlert 
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Notification Group."
        ::= { alcatelIND1ChassisMIBGroups 6 }

    alaChasEntPhysFanGroup OBJECT-GROUP
        OBJECTS
        {
            alaChasEntPhysFanStatus,
            alaChasEntPhysFanAirflow,
            alaChasEntPhysFanSpeed
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Physical Fan Group."
        ::= { alcatelIND1ChassisMIBGroups 7 }

    alaChasNotificationObjectGroup OBJECT-GROUP
        OBJECTS
        {
            chassisTrapsStrLevel,
            chassisTrapsStrAppID,
            chassisTrapsStrSnapID,
            chassisTrapsStrfileName,
            chassisTrapsStrfileLineNb,
            chassisTrapsStrErrorNb,
            chassisTrapsStrcomments,
            chassisTrapsStrdataInfo,
            chassisTrapsObjectType,
            chassisTrapsObjectNumber,
            chassisTrapsAlertNumber,
            chassisTrapsAlertDescr,
            physicalIndex,
            chasTrapsNiRqstdBpsSysPower,
            chasTrapsNiGrantdBpsSysPower,
            chasTrapBPSShelfId, 
            chasTrapsBPSPowerSupply,
            chasTrapsBPSEventAlert,
            chasTrapsBPSSystemFETChange,
            chasTrapsBPSPoeFETChange,
            chasTrapsBPSFwVersion,
            chasTrapsBPSFwType
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Notification Object Group."
        ::= { alcatelIND1ChassisMIBGroups 9 }

        chassisSupervisionRfsCommandsGroup OBJECT-GROUP
        OBJECTS
        {
            chasSupervisionRfsCommandsSlot,
            chasSupervisionRfsCommandsCommand,
            chasSupervisionRfsCommandsSrcFileName,
            chasSupervisionRfsCommandsDestFileName,
            chasSupervisionRfsCommandsRlsDirName,
            chasSupervisionRfsCommandsRlsFileName,
            chasSupervisionRfsCommandsProcessingState,
            chasSupervisionRfsCommandsStatusCode
        }
        STATUS  current
        DESCRIPTION
	        "Chassis Supervision RFS Command Group."
        ::= { alcatelIND1ChassisMIBGroups 10 }

        chasSupervisionCmmCertifiedEntryGroup OBJECT-GROUP
        OBJECTS
        {
             chasSupervisionCmmCertifiedStatus
        }
        STATUS  current
        DESCRIPTION
	        "Information about Cmm Certified Group."
        ::= { alcatelIND1ChassisMIBGroups 11 }

        chasSupervisionFlashMemEntryGroup OBJECT-GROUP
        OBJECTS
        {
        	chasSupervisionFlashSize,
        	chasSupervisionFlashFree,
        	chasSupervisionFlashUsed
        }
        STATUS  current
        DESCRIPTION
	        "The systems flash memory information group."
        ::= { alcatelIND1ChassisMIBGroups 12 }


       chasSupervisionRfsDfEntryGroup OBJECT-GROUP
        OBJECTS
        {
        	chasSupervisionRfsDfFlashFree,
        	chasSupervisionRfsDfFlashSize,
        	chasSupervisionRfsDfUsbFree,
        	chasSupervisionRfsDfUsbSize
        }
        STATUS  current
        DESCRIPTION
	        "Information about RfsDf file system group."
        ::= { alcatelIND1ChassisMIBGroups 13 }


        chasSupervisionRfsLsEntryGroup OBJECT-GROUP
        OBJECTS
        {
            chasSupervisionRfsLsFileIndex,
            chasSupervisionRfsLsSlot,
            chasSupervisionRfsLsDirName,
            chasSupervisionRfsLsFileName,
            chasSupervisionRfsLsFileType,
            chasSupervisionRfsLsFileSize,
            chasSupervisionRfsLsFileAttr,
            chasSupervisionRfsLsFileDateTime
        }
        STATUS  current
        DESCRIPTION
	        "Information about a RfsLs file group."
        ::= { alcatelIND1ChassisMIBGroups 14 }

     alaChasBpsFwGroup OBJECT-GROUP
        OBJECTS
        {
            alaChasBpsUpdateFirmware,
            alaChasBpsCpldRev, 
            alaChasBpsMmcuRev,
            alaChasBpsCmcuRev
        }
        STATUS  current
        DESCRIPTION
        "Information about BPS FW group."
        ::= { alcatelIND1ChassisMIBGroups 15 }

        alaChasBpsConnectorPriorityGroup OBJECT-GROUP
        OBJECTS
        {
            alaChasBpsConnectorShelfId,        
            alaChasBpsConnectorPriority,   
            alaChasBpsConnectorNum,    
            alaChasBpsSerialNum 
        }
        STATUS  current
        DESCRIPTION
        "Information about BPS Connector Priority group."
        ::= { alcatelIND1ChassisMIBGroups 16 }

    alaChasBpsModeGroup OBJECT-GROUP
        OBJECTS
        {
            alaChasBpsMode
        }
        STATUS  current
        DESCRIPTION
        "Information about BPS Mode group."
        ::= { alcatelIND1ChassisMIBGroups 17 }

    alaChasBpsPowerSupplyGroup OBJECT-GROUP
        OBJECTS
        {
                alaChasBpsPowerSupplyName,
                alaChasBpsPowerSupplyDescr,
                alaChasBpsPowerSupplyModuleType,
                alaChasBpsPowerSupplyPartNumber,
                alaChasBpsPowerSupplyHardwareRev,
                alaChasBpsPowerSupplySerialNum,
                alaChasBpsPowerSupplyMfgDate,
                alaChasBpsPowerSupplyOperStatus,
                alaChasBpsPowerSupplyPowerProv
        }
        STATUS  current
        DESCRIPTION
        " BPS Power Supply  group."
        ::= { alcatelIND1ChassisMIBGroups 18 }

    alaChasBpsTotalPowerAllocGroup  OBJECT-GROUP
        OBJECTS
        {
            alaChasBpsSysTotalAvailablePower,   
            alaChasBpsSysTotalAllocation,      
            alaChasBpsPoeTotalAvailablePower, 
            alaChasBpsPoeTotalAllocation    
        }
        STATUS  current
        DESCRIPTION
        " BPS Total Power Alloc group."
        ::= { alcatelIND1ChassisMIBGroups 19 }

    chasEntPhysicalGroup OBJECT-GROUP
        OBJECTS
        {
            chasEntPhysAdminStatus                ,
            chasEntPhysOperStatus                 ,
            chasEntPhysPower                      ,
            chasEntPhysModuleType                 ,
            chasEntPhysPartNumber                 ,
            chasEntPhysLedStatusOk1               ,
            chasEntPhysLedStatusOk2               ,
            chasEntPhysLedStatusPrimaryCMM        ,
            chasEntPhysLedStatusSecondaryCMM      ,
            chasEntPhysLedStatusTemperature       ,
            chasEntPhysLedStatusFan               ,
            chasEntPhysLedStatusBackupPS          ,
            chasEntPhysLedStatusInternalPS        ,
            chasEntPhysLedStatusControl           ,
            chasEntPhysLedStatusFabric            ,
            chasEntPhysLedStatusPS                ,
            chasEntPhysAsic1Rev                   ,
            chasEntPhysAsic2Rev                   ,
            chasEntPhysAsic3Rev                   ,
            chasEntPhysAsic4Rev                   ,
            chasEntPhysAsic5Rev                   ,
            chasEntPhysAsic6Rev                   ,
            chasEntPhysCpldRev                    ,
            chasEntPhysDaughterFpga1Rev           ,
            chasEntPhysDaughterFpga2Rev           ,
            chasEntPhysNiNum                      ,
            chasEntPhysGbicNum                    ,
            chasEntPhysWaveLen                    ,
            chasEntPhysUbootRev                   ,
            chasEntPhysUbootMinibootRev           ,
            chasEntPhysMacAddress                 ,
            chasEntPhysCpuModel                   ,
            chasEntPhysAirflow                    ,
            chasEntPhysPowerUsed                  ,
            chasEntPhysPowerType

        }
        STATUS  current
        DESCRIPTION
            "Chassis (inclosure) Entity Physical Group."
        ::= { alcatelIND1ChassisPhysMIBGroups 1 }

    chassisPhysNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS
        {
            chassisTrapsStr                  ,
            chassisTrapsAlert                ,
            chassisTrapsStateChange
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Physical Notification Group."
        ::= { alcatelIND1ChassisPhysMIBGroups 2 }

    chassisTemperatureGroup OBJECT-GROUP
        OBJECTS
        {
            chasEntTempCurrent,
            chasEntTempDangerThreshold,
            chasEntTempStatus,
            chasEntTempThreshold
        }
        STATUS  current
        DESCRIPTION
            "Chassis Supervision Temprature Group."
        ::= { alcatelIND1ChassisPhysMIBGroups 3 }

END