path: root/MIBS/nokia/aos7/ALCATEL-IND1-BFD-MIB

ALCATEL-IND1-BFD-MIB DEFINITIONS ::= BEGIN

 IMPORTS

      MODULE-IDENTITY, OBJECT-TYPE, Integer32,
      Unsigned32, Counter64,TimeTicks,
      OBJECT-IDENTITY
         FROM SNMPv2-SMI                        -- [RFC2578]

      MODULE-COMPLIANCE,OBJECT-GROUP
	     FROM SNMPv2-CONF

      TEXTUAL-CONVENTION, TruthValue, RowStatus
         FROM SNMPv2-TC                         -- [RFC2579]

      InterfaceIndex, InterfaceIndexOrZero
         FROM IF-MIB                            -- [RFC2863]

      InetAddress, InetAddressType, InetPortNumber
         FROM INET-ADDRESS-MIB                  -- [RFC4001]

      SnmpAdminString
         FROM SNMP-FRAMEWORK-MIB

      softentIND1BFD
         FROM ALCATEL-IND1-BASE;


      alcatelIND1BfdMIB  MODULE-IDENTITY
        LAST-UPDATED  "201005050000Z"
        ORGANIZATION  "Alcatel-Lucent"
        CONTACT-INFO
            "Please consult with Customer Service to ensure the most appropriate
             version of this document is used with the products in question:

                      Alcatel-Lucent, Enterprise Solutions Division
                    (Formerly Alcatel Internetworking, Incorporated)
                              26801 West Agoura Road
                              Agoura Hills, CA  91301-5122
                              United States Of America

            Telephone:               North America  +1 800 995 2696
                                     Latin America  +1 877 919 9526
                                     Europe         +31 23 556 0100
                                     Asia           +65 394 7933
                                     All Other      +1 818 878 4507

            Electronic Mail:         support@ind.alcatel.com
            World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
            File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

      DESCRIPTION
            "This document describes the Management Information Base for
             Bidirectional Forwarding Detection(BFD) Protocol.

             The right to make changes in specification and other information
             contained in this document without prior notice is reserved.

             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.

                         Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"

      REVISION      "201005050000Z"
      DESCRIPTION
            "The latest version of this MIB Module."
      ::= { softentIND1BFD 1}


      alaBfdObjects    OBJECT-IDENTITY
         STATUS  current
         DESCRIPTION
         "Branch for Bidirectional Forwarding Detection subsystem managed objects"
         ::= { alcatelIND1BfdMIB 1 }

      alcatelIND1BfdMIBConformance OBJECT-IDENTITY
         STATUS  current
         DESCRIPTION
         "Conformance"
         ::= { alcatelIND1BfdMIB 2 }


 --  Textual Conventions

      AlaBfdInterval ::= TEXTUAL-CONVENTION
         STATUS        current
         DESCRIPTION
         "The BFD interval delay, in milliseconds."
         SYNTAX        Unsigned32 (0..4294967295)

      AlaBfdDiag ::= TEXTUAL-CONVENTION
         STATUS        current
         DESCRIPTION
         "A common BFD diagnostic code."
         SYNTAX INTEGER {
                        noDiagnostic(0),
                        controlDetectionTimeExpired(1),
                        echoFunctionFailed(2),
                        neighborSignaledSessionDown(3),
                        forwardingPlaneReset(4),
                        pathDown(5),
                        concatenatedPathDown(6),
                        administrativelyDown(7),
                        reverseConcatenatedPathDown (8)
                       }

      AlaBfdStatus ::= TEXTUAL-CONVENTION
         STATUS        current
         DESCRIPTION
         "Administrative status"
         SYNTAX  INTEGER {
                          enabled(1),
                          disabled(2)
                         }


 --  BFD General Variables

      alaBfdGlobalObjects OBJECT IDENTIFIER ::= { alaBfdObjects 1 }

      alaBfdGlobalVersionNumber OBJECT-TYPE
         SYNTAX          Unsigned32
         MAX-ACCESS      read-only
         STATUS          current
         DESCRIPTION
         "The version number of the BFD protocol that is used by BFD sessions in this
          router instance."
         DEFVAL { 1 }
         ::= { alaBfdGlobalObjects 1 }

      alaBfdGlobalAdminStatus  OBJECT-TYPE
         SYNTAX          AlaBfdStatus
         MAX-ACCESS      read-write
         STATUS          current
         DESCRIPTION
         "The administrative status of BFD in this router instance."
         DEFVAL { disabled }
         ::= { alaBfdGlobalObjects 2 }

      alaBfdGlobalTxInterval   OBJECT-TYPE
         SYNTAX          AlaBfdInterval
         MAX-ACCESS      read-write
         STATUS          current
         DESCRIPTION
         "The Desired Tx interval, in milliseconds, at which packets should be
          transmitted on BFD sessions in this router instance."
         DEFVAL { 300 }
         ::= { alaBfdGlobalObjects 3 }

      alaBfdGlobalRxInterval   OBJECT-TYPE
         SYNTAX          AlaBfdInterval
         MAX-ACCESS      read-write
         STATUS          current
         DESCRIPTION
         "The Minimum Rx interval, in milliseconds, at which packets can be
          received on BFD sessions in this router instance."
         DEFVAL { 300 }
         ::= { alaBfdGlobalObjects 4 }

      alaBfdGlobalDetectMult OBJECT-TYPE
         SYNTAX          Integer32 (3..10)
         MAX-ACCESS      read-write
         STATUS          current
         DESCRIPTION
         "The Detection time multiplier. The negotiated transmit interval, multiplied by
          the value of this object, provides the detection time for the receiving system."
         DEFVAL { 3 }
         ::= { alaBfdGlobalObjects 5}

      alaBfdGlobalEchoRxInterval OBJECT-TYPE
         SYNTAX          AlaBfdInterval
         MAX-ACCESS      read-write
         STATUS          current
         DESCRIPTION
         "The Minimum Echo Rx interval, in milliseconds, at which packets can be
          received on BFD sessions in this router instance."
          DEFVAL { 300 }
          ::= { alaBfdGlobalObjects 6 }

      alaBfdGlobalProtocolApps   OBJECT-TYPE
       	 SYNTAX BITS {
                      vrrp(0),
                      staticRtg(1),
                      ospf(2),
                      bgp(3),
                      isis(4),
                      pim(5),
                      dvmrp(6),
                      ospf3(7)
                     }
         MAX-ACCESS    read-only
		 STATUS        current
		 DESCRIPTION
         "Bit map object to reflect BFD applications currently registered to
         request BFD session state notifications. Bits 0 - 6 are currently in use, and
         if set, indicate that the respective application is registered with BFD:
		    bit 0 - VRRP
		    bit 1 - STATIC ROUTING (i.e. IP Route Manager)
		    bit 2 - OSPF
          	    bit 3 - BGP 
          	    bit 4 - ISIS
          	    bit 5 - PIM
          	    bit 6 - DVMRP
                    bit 7 - OSPF3 "
         ::= { alaBfdGlobalObjects 7}
       	

--  BFD interface Table
--  BFD interface Table specifies the configured session parameters used over the IP interface.

      alaBfdIntfTable OBJECT-TYPE
         SYNTAX       SEQUENCE OF AlaBfdIntfEntry
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
         "The BFD Interface Table describes the configured parameters used for
          BFD sessions on this outgoing IP interface, identified by the interface index."
         ::= { alaBfdObjects 2 }

      alaBfdIntfEntry OBJECT-TYPE
         SYNTAX      AlaBfdIntfEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
         "The BFD interface Entry describes BFD session configuration for the IP
         interface."
         INDEX  { alaBfdIntfIndex }
         ::= { alaBfdIntfTable 1 }

      AlaBfdIntfEntry ::= SEQUENCE {
               alaBfdIntfIndex                      InterfaceIndex,
               alaBfdIntfAddrType                   InetAddressType,
               alaBfdIntfAddr                       InetAddress,
               alaBfdIntfAdminStatus                AlaBfdStatus,
               alaBfdIntfDesiredMinTxInterval       AlaBfdInterval,
               alaBfdIntfReqMinRxInterval           AlaBfdInterval,
               alaBfdIntfReqMinEchoRxInterval       AlaBfdInterval,
               alaBfdIntfDetectMult                 Integer32,
               alaBfdIntfAuthPresFlag               TruthValue,
               alaBfdIntfAuthenticationType         INTEGER,
               alaBfdIntfIfName                     SnmpAdminString,
               alaBfdIntfOperStatus                 INTEGER,
               alaBfdIntfRowStatus                  RowStatus
             }

      alaBfdIntfIndex OBJECT-TYPE
         SYNTAX      InterfaceIndex
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
         "The ifIndex of the IP Interface for which the BFD session configuration is applied"
         ::= { alaBfdIntfEntry 1}

      alaBfdIntfAddrType OBJECT-TYPE
         SYNTAX      InetAddressType
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "This object specifies IP address type values - unknown(0), ipv4(1) or ipv6(2)."
         ::= { alaBfdIntfEntry 2}

      alaBfdIntfAddr OBJECT-TYPE
         SYNTAX      InetAddress
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "The address of the IP interface for which BFD session parameters are configured"
         ::= { alaBfdIntfEntry 3}

      alaBfdIntfAdminStatus OBJECT-TYPE
         SYNTAX      AlaBfdStatus
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "The administrative status of the BFD interface."
         DEFVAL { disabled }
         ::= { alaBfdIntfEntry 4}

      alaBfdIntfDesiredMinTxInterval OBJECT-TYPE
         SYNTAX      AlaBfdInterval
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "The Minimum Desired Tx interval at which packets should be transmitted for
          BFD sessions on this interface. The default value for this object is derived
          from the value of alaBfdGlobalTxInterval."
         ::= { alaBfdIntfEntry 5}

      alaBfdIntfReqMinRxInterval OBJECT-TYPE
         SYNTAX      AlaBfdInterval
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "The Minimum Rx interval at which packets can be received for BFD sessions on
          this interface. The default value for this object is derived from the value of
          alaBfdGlobalRxInterval."
         ::= { alaBfdIntfEntry 6}

      alaBfdIntfReqMinEchoRxInterval  OBJECT-TYPE
         SYNTAX      AlaBfdInterval
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "The Minimum Echo Rx interval at which ECHO packets can be received for BFD
         sessions on this interface. The default value for this object is derived from the
         value of alaBfdGlobalEchoRxInterval."
         ::= { alaBfdIntfEntry 7}

      alaBfdIntfDetectMult  OBJECT-TYPE
         SYNTAX      Integer32 (3..10)
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
         "The Detection time multiplier for BFD sessions on this interface. The default
          value for this object is derived from the value of alaBfdGlobalDetectMult."
         ::= { alaBfdIntfEntry 8}

      alaBfdIntfAuthPresFlag    OBJECT-TYPE
         SYNTAX          TruthValue
         MAX-ACCESS      read-create
         STATUS          current
         DESCRIPTION
         "This object indicates the local system's desire to use authentication on BFD
         sessions. If set to true(1), the local system wishes the session to be authenticated
         and set to false(0) if not."
         DEFVAL { false }
         ::= { alaBfdIntfEntry 9}

      alaBfdIntfAuthenticationType  OBJECT-TYPE
         SYNTAX  INTEGER {
                           none (1),
                           simplePassword(2),
                           keyedMD5(3),
                           meticulousKeyedMD5(4),
                           keyedSHA1(5),
                           meticulousKeyedSHA1(6)
                         }
         MAX-ACCESS       read-create
         STATUS           current
         DESCRIPTION
         "The Authentication Type used for BFD sessions on this interface. This field is valid
          only when the Authentication Present bit is set."
         DEFVAL { none }
         ::= { alaBfdIntfEntry 10}

      alaBfdIntfIfName       OBJECT-TYPE
         SYNTAX          SnmpAdminString
         MAX-ACCESS      read-create
         STATUS          current
         DESCRIPTION
         "The user defined name used to identify the IP interface"
         ::= { alaBfdIntfEntry  11}

      alaBfdIntfOperStatus      OBJECT-TYPE
         SYNTAX         INTEGER  {
                            up(1),
                            down(2)
                        }
         MAX-ACCESS     read-create
         STATUS         current
         DESCRIPTION
         "The operational status of this BFD IP interface, which is dependent on IP interface
         status."
         ::= { alaBfdIntfEntry  12}

      alaBfdIntfRowStatus       OBJECT-TYPE
         SYNTAX          RowStatus
         MAX-ACCESS      read-create
         STATUS          current
         DESCRIPTION
         "Snmp row status variable for this interface entry."
         ::= { alaBfdIntfEntry  13}

 --  BFD Session Table
 --  The BFD Session Table describes BFD session specific information.

      alaBfdSessTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF AlaBfdSessEntry
         MAX-ACCESS   not-accessible
         STATUS   current
         DESCRIPTION
         "The BFD Session Table describes the BFD sessions for this router instance."
         ::= { alaBfdObjects 3 }

      alaBfdSessEntry OBJECT-TYPE
         SYNTAX      AlaBfdSessEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
         "The BFD Session Entry describes the BFD session."
         INDEX  { alaBfdSessDiscriminator}
         ::= { alaBfdSessTable 1 }

      AlaBfdSessEntry ::= SEQUENCE {
                alaBfdSessDiscriminator            Unsigned32,
                alaBfdSessNeighborAddrType         InetAddressType,
                alaBfdSessNeighborAddr             InetAddress,
                alaBfdSessSessionType              BITS,
                alaBfdSessRemoteDiscr              Unsigned32,
                alaBfdSessUdpPort                  InetPortNumber,
                alaBfdSessState                    INTEGER,
                alaBfdSessDiag                     AlaBfdDiag,
                alaBfdSessOperMode                 INTEGER,
                alaBfdSessControlPlanIndepFlag     TruthValue,
                alaBfdSessIfIndex                  InterfaceIndexOrZero,
                alaBfdSessNegotiatedTxInterval     AlaBfdInterval,
                alaBfdSessNegotiatedRxInterval     AlaBfdInterval,
                alaBfdSessEchoRxInterval           AlaBfdInterval,
                alaBfdSessProtocolApps             BITS
             }

      alaBfdSessDiscriminator    OBJECT-TYPE
         SYNTAX        Unsigned32 (1..1024)
         MAX-ACCESS    not-accessible
         STATUS        current
         DESCRIPTION
         "The systemwide-unique local discriminator that identifies this BFD session."
         ::= { alaBfdSessEntry 1}

      alaBfdSessNeighborAddrType   OBJECT-TYPE
         SYNTAX      InetAddressType
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "This object specifies the IP address type of the neighbor or remote router."
         ::= { alaBfdSessEntry 2}

      alaBfdSessNeighborAddr     OBJECT-TYPE
         SYNTAX        InetAddress
         MAX-ACCESS    read-only
         STATUS        current
         DESCRIPTION
         "The IP address of the neighbor or remote router for this BFD session."
         ::= { alaBfdSessEntry 3}

      alaBfdSessSessionType	    OBJECT-TYPE
         SYNTAX BITS {
                       asynchronous(0),
                       echo(1),
                       demand(2)
                     }
         MAX-ACCESS     read-only
         STATUS         current
         DESCRIPTION
         "This bit map object specifies the session type(s) that have been requested by
          BFD applications to this session's remote address. One or more applications can
          request different types of sessions to the same remote address.
          Bits 0 - 2 are currently in use, and if set, indicate that the respective
          session type has been requested for this session:
                bit 0 - Asynchronous
                bit 1 - Echo Function
                bit 2 - Demand "
         ::= { alaBfdSessEntry 4}

      alaBfdSessRemoteDiscr   OBJECT-TYPE
         SYNTAX        Unsigned32 (1..4294967295)
         MAX-ACCESS    read-only
         STATUS        current
         DESCRIPTION
         "The discriminator used by the remote router for this BFD session."
         ::= { alaBfdSessEntry 5}

      alaBfdSessUdpPort OBJECT-TYPE
         SYNTAX      InetPortNumber
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "The unique source UDP Port for this BFD session in this router instance."
         ::= { alaBfdSessEntry 6}

      alaBfdSessState    OBJECT-TYPE
         SYNTAX   INTEGER {
                            adminDown(1),
                            down(2),
                            init(3),
                            up(4)
                          }
         MAX-ACCESS   read-only
         STATUS      current
         DESCRIPTION
         "The protocol state of the BFD session."
         ::= { alaBfdSessEntry 7}

      alaBfdSessDiag        OBJECT-TYPE
         SYNTAX      AlaBfdDiag
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "A diagnostic code specifying the local system's reason for the last transition
          of the session from up(4)to some other state."
         ::= { alaBfdSessEntry 8}

      alaBfdSessOperMode     OBJECT-TYPE
         SYNTAX   INTEGER {
                            asyncModeWEchoFunction(1),
                            asynchModeWOEchoFunction(2),
                            demandModeWEchoFunction(3),
                            demandModeWOEchoFunction(4),
                            echoOnly(5)
                          }
         MAX-ACCESS   read-only
         STATUS   current
         DESCRIPTION
         "This object specifies the current operating mode of the BFD session."
         ::= { alaBfdSessEntry 10}

      alaBfdSessControlPlanIndepFlag    OBJECT-TYPE
         SYNTAX        TruthValue
         MAX-ACCESS    read-only
         STATUS        current
         DESCRIPTION
         "This object indicates the local system's ability to continue to
          function through a disruption of the control plane. Specifically, it is
          set  to true(1) if the local system's BFD implementation independent of the
          control plane. Otherwise, the value is set to false(0)"
         ::= { alaBfdSessEntry 11}

      alaBfdSessIfIndex      OBJECT-TYPE
         SYNTAX        InterfaceIndexOrZero
         MAX-ACCESS    read-only
         STATUS        current
         DESCRIPTION
         "This object contains an ifIndex of the IP interface on which this
          BFD session is running. This value can be zero if there are no interface associated
          with this BFD session."
         ::= { alaBfdSessEntry 12}

      alaBfdSessNegotiatedTxInterval  OBJECT-TYPE
         SYNTAX          AlaBfdInterval
         MAX-ACCESS      read-only
         STATUS          current
         DESCRIPTION
         "This object specifies the minimum interval, in milliseconds, that the local system
          will transmit BFD Control packets."
         ::= { alaBfdSessEntry 13}

      alaBfdSessNegotiatedRxInterval OBJECT-TYPE
         SYNTAX          AlaBfdInterval
         MAX-ACCESS      read-only
         STATUS          current
         DESCRIPTION
         "This object specifies the minimum interval, in milliseconds, that the local system
          will receive BFD Control packets."
         ::= { alaBfdSessEntry 14}

      alaBfdSessEchoRxInterval OBJECT-TYPE
         SYNTAX          AlaBfdInterval
         MAX-ACCESS      read-only
         STATUS          current
         DESCRIPTION
         "This object specifies the minimum echo rx interval, in milliseconds, that the local system
          will receive BFD Echo packets."
         ::= { alaBfdSessEntry 15}

      alaBfdSessProtocolApps	    OBJECT-TYPE
         SYNTAX BITS {
                       vrrp(0),
      	               staticRtg(1),
      	               ospf(2),
                       bgp(3),
                       isis(4),
                       pim(5),
                       dvmrp(6),
                       ospf3(7)
      	             }
      	 MAX-ACCESS    read-only
      	 STATUS        current
      	 DESCRIPTION
         "Bit map object to reflect BFD applications that have requested for detection to
         this session's remote address. Bits 0 - 6 are currently in use, and if set,
         indicate that the respective application has requested BFD session state event
         notifications:
                    bit 0 - VRRP
                    bit 1 - STATIC ROUTING (i.e. IP Route Manager)
                    bit 2 - OSPF
                    bit 3 - BGP 
                    bit 4 - ISIS
                    bit 5 - PIM
                    bit 6 - DVMRP
                    bit 7 - OSPF3 "
         ::= { alaBfdSessEntry 16}


 -- BFD Session Performance Table

      alaBfdSessPerfTable OBJECT-TYPE
         SYNTAX        SEQUENCE OF AlaBfdSessPerfEntry
         MAX-ACCESS    not-accessible
         STATUS        current
         DESCRIPTION
         "This table specifies BFD Session performance and statistics."
         ::= { alaBfdObjects 4 }

      alaBfdSessPerfEntry OBJECT-TYPE
         SYNTAX        AlaBfdSessPerfEntry
         MAX-ACCESS    not-accessible
         STATUS        current
         DESCRIPTION
         "An entry in this table is created for every BFD Session in this router
         instance."
         AUGMENTS    { alaBfdSessEntry }
         ::= { alaBfdSessPerfTable 1 }

      AlaBfdSessPerfEntry ::= SEQUENCE {
                alaBfdSessPerfPktIn               Counter64,
                alaBfdSessPerfPktOut              Counter64,
                alaBfdSessPerfEchoOut             Counter64,
                alaBfdSessPerfEchoIn              Counter64,
                alaBfdSessPerfUpTime              TimeTicks,
                alaBfdSessPerfLastSessDownTime    TimeTicks,
                alaBfdSessPerfLastCommLostDiag    AlaBfdDiag,
                alaBfdSessPerfSessUpCount         Counter64,
                alaBfdSessPerfDiscTime            TimeTicks
              }

      alaBfdSessPerfPktIn      OBJECT-TYPE
         SYNTAX      Counter64
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "The total number of BFD packets received for this BFD session."
         ::= { alaBfdSessPerfEntry 1 }

      alaBfdSessPerfPktOut     OBJECT-TYPE
         SYNTAX      Counter64
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "The total number of BFD packets sent for this BFD session."
         ::= { alaBfdSessPerfEntry 2 }

      alaBfdSessPerfEchoOut    OBJECT-TYPE
         SYNTAX      Counter64
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "The total number of BFD Echo packets sent for this BFD session."
         ::= { alaBfdSessPerfEntry 3 }

      alaBfdSessPerfEchoIn     OBJECT-TYPE
         SYNTAX      Counter64
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "The total number of BFD Echo packets received for this BFD session."
         ::= { alaBfdSessPerfEntry 4 }

      alaBfdSessPerfUpTime   OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
         "The system time elapsed since the most recent occasion at which the session became up.
          If no such event occured, this object contains a zero value."
         ::= { alaBfdSessPerfEntry 5 }

      alaBfdSessPerfLastSessDownTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
         "The system time elapsed since the most recent occasion at which communication
          was lost with the remote end (i.e. session was down). If no such event occured, 
          this object contains a zero value."
         ::= { alaBfdSessPerfEntry 6 }

      alaBfdSessPerfLastCommLostDiag OBJECT-TYPE
         SYNTAX       AlaBfdDiag
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
         "The BFD diagnostic code for the last time communication was lost with the remote
          end. If no such event occured, this object contains a zero value."
         ::= { alaBfdSessPerfEntry 7 }

      alaBfdSessPerfSessUpCount      OBJECT-TYPE
         SYNTAX       Counter64
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
         "The number of times this session has gone into the Up state since the
          router last rebooted."
         ::= { alaBfdSessPerfEntry 8 }

      alaBfdSessPerfDiscTime   OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
         "The value of system time on the most recent occasion at which any one or more of the
          session counters suffered a discontinuity.The relevant counters are the specific
          instances associated with this BFD session of any Counter64 object contained in
          the BfdSessPerfTable. If no such discontinuities have occurred since the last
          re-initialization of the local management  subsystem, then this object
          contains a zero value."
         ::= { alaBfdSessPerfEntry 9 }

  -- BFD Conformance

      alcatelIND1BfdMIBGroups OBJECT IDENTIFIER ::=
              { alcatelIND1BfdMIBConformance 1}

      alcatelIND1BfdMIBCompliances  OBJECT IDENTIFIER ::=
              { alcatelIND1BfdMIBConformance 2}


  -- compliance statements

      alcatelIND1BfdMIBCompliance MODULE-COMPLIANCE
         STATUS  current
         DESCRIPTION
         "The compliance statement for device support of BFD."
         MODULE
         MANDATORY-GROUPS {
                     alaBfdBasicGroup,
                     alaBfdIntfCfgGroup,
                     alaBfdSessGroup,
                     alaBfdSessPerfGroup
                 }
         ::= { alcatelIND1BfdMIBCompliances 1}

        -- units of conformance

      alaBfdBasicGroup	OBJECT-GROUP
         OBJECTS {
		          alaBfdGlobalVersionNumber,
                  alaBfdGlobalAdminStatus,
		          alaBfdGlobalTxInterval,
		          alaBfdGlobalRxInterval,
		          alaBfdGlobalDetectMult,
		          alaBfdGlobalEchoRxInterval,
		          alaBfdGlobalProtocolApps
		        }
		 STATUS      current
		 DESCRIPTION
		 "A collection of objects providing information about the
		  configuration done for BFD at global level."
         ::= { alcatelIND1BfdMIBGroups 1}

      alaBfdIntfCfgGroup 	OBJECT-GROUP
         OBJECTS {
                  -- alaBfdIntfIndex,
                  alaBfdIntfAddr,
                  alaBfdIntfAddrType,
			      alaBfdIntfAdminStatus,
			      alaBfdIntfDesiredMinTxInterval,
			      alaBfdIntfReqMinRxInterval,
			      alaBfdIntfReqMinEchoRxInterval,
			      alaBfdIntfDetectMult,
			      alaBfdIntfAuthPresFlag,
			      alaBfdIntfAuthenticationType,
                  alaBfdIntfIfName,
                  alaBfdIntfOperStatus,
                  alaBfdIntfRowStatus
              	}
		 STATUS      current
		 DESCRIPTION
		 "A collection of objects providing information about the
		  configuration done for a BFD interface."
		 ::= { alcatelIND1BfdMIBGroups 2}
		
      alaBfdSessGroup      	OBJECT-GROUP
	     OBJECTS {
			    --  alaBfdSessDiscriminator,
			      alaBfdSessNeighborAddrType,
			      alaBfdSessNeighborAddr,
                  alaBfdSessSessionType,
			      alaBfdSessRemoteDiscr,
			      alaBfdSessUdpPort,
			      alaBfdSessState,
			      alaBfdSessDiag,
			      alaBfdSessOperMode,
			      alaBfdSessControlPlanIndepFlag,
			      alaBfdSessIfIndex,
			      alaBfdSessNegotiatedTxInterval,
			      alaBfdSessNegotiatedRxInterval,
			      alaBfdSessEchoRxInterval,
                  alaBfdSessProtocolApps
                }
		 STATUS      current
		 DESCRIPTION
		 "A collection of objects providing information about the BFD session."
		 ::= { alcatelIND1BfdMIBGroups 3}
		
	  alaBfdSessPerfGroup 	OBJECT-GROUP
		 OBJECTS {
			       alaBfdSessPerfPktIn,
			       alaBfdSessPerfPktOut,
			       alaBfdSessPerfEchoOut,
			       alaBfdSessPerfEchoIn,
			       alaBfdSessPerfUpTime,
			       alaBfdSessPerfLastSessDownTime,
			       alaBfdSessPerfLastCommLostDiag,
			       alaBfdSessPerfSessUpCount,
                   alaBfdSessPerfDiscTime
                  }
         STATUS      current
		 DESCRIPTION
		 "A collection of objects providing information about the BFD session
          performance counters."
		 ::= { alcatelIND1BfdMIBGroups 4}
	
 END