path: root/MIBS/nokia/TIMETRA-TC-MG-MIB

TIMETRA-TC-MG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Integer32, MODULE-IDENTITY, Unsigned32
                                                         FROM SNMPv2-SMI
    DisplayString, TEXTUAL-CONVENTION
                                                         FROM SNMPv2-TC
    TNamedItem, TNamedItemOrEmpty,
    timetraTCMIBModule
                                                         FROM TIMETRA-TC-MIB
    ;

timetraTCMGMIBModule             MODULE-IDENTITY
    LAST-UPDATED "201701010000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia SROS Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module for the SNMP Textual Conventions
         (TCs) used in the Nokia SROS manageability instrumentation.

         Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this
         document is authorized on the condition that the foregoing copyright
         notice is included.

         This SNMP MIB module (Specification) embodies Nokia's
         proprietary intellectual property.  Nokia retains
         all title and ownership in the Specification, including any
         revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied `as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "201701010000Z"
    DESCRIPTION
        "Rev 15.0               01 Jan 2017 00:00
         15.0 release of the TIMETRA-TC-MG-MIB."

    REVISION    "201311080000Z"
    DESCRIPTION
        "Rev 1.0                08 Nov 2013 00:00
         1.0 Release of the TIMETRA-TC-MG-MIB."

    ::= { timetraTCMIBModule 1 }

TmnxMobProfName                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfName describes the name of a profile used by
         mobile gateways."
    SYNTAX      TNamedItem

TmnxMobProfNameOrEmpty           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfNameOrEmpty describes the name of a profile
         used by mobile gateways."
    SYNTAX      TNamedItemOrEmpty

TmnxMobProfIpTtl                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfIpTtl describes the Time-To-Live (TTL) value."
    SYNTAX      Unsigned32 (1..255)

TmnxMobProfMsgReTxTimeout        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfMsgReTxTimeout describes the message
         retransmit timeout value in seconds."
    SYNTAX      Unsigned32 (1..30)

TmnxMobProfMsgReTxRetryCount     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfMsgReTxRetryCount describes the message
         retransmit retry count value."
    SYNTAX      Unsigned32 (1..8)

TmnxMobProfKeepAliveTimeout      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfKeepAliveTimeout describes the keep-alive
         timeout value in seconds."
    SYNTAX      Unsigned32 (0 | 60..180)

TmnxMobProfKeepAliveRetryCount   ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfKeepAliveRetryCount describes the keep-alive
         retry count value."
    SYNTAX      Unsigned32 (1..15)

TmnxMobProfKeepAliveResponse     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfKeepAliveResponse describes the keep-alive T3
         response value in seconds."
    SYNTAX      Unsigned32 (1..20)

TmnxMobProfKeepAliveInterval     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfKeepAliveInterval describes the intervals
         between heartbeat messages"
    SYNTAX      Unsigned32 (0 | 60..180)

TmnxMobDiaTransTimer             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDiaTransTimer describes the diameter peer
         transaction timer value in seconds."
    SYNTAX      Unsigned32 (1..180)

TmnxMobDiaRetryCount             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDiaRetryCount describes the diameter peer retry
         count value."
    SYNTAX      Unsigned32 (0..8)

TmnxMobDiaPeerHost               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDiaPeerHost describes the name of a destination
         realm, originating realm and originating host."
    SYNTAX      DisplayString (SIZE (0..80))

TmnxMobGwId                      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobGwId identifies mobile gateways."
    SYNTAX      Unsigned32 (1..8)

TmnxMobNode                      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobNode describes the name of a mobile gateway which
         consists of Mobile Country Code (MCC), Mobile Network Code (MNC),
         Region string, Group Id, Node Id.

         A mobile gateway name can be described as follows:

         <MCC>.<MNC>.<SGW|PGW>.<Region String>.<Group Id>.<Node Id>

         MCC : 3 digits (000-999)
         MNC : 2 or 3 digits
         Application Type : SGW or PGW (3 characters)
         Region String : 10 characters
         Group Id : 3 characters
         Node Id : 3 characters"
    SYNTAX      DisplayString (SIZE (0..30))

TmnxMobBufferLimit               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobBufferLimit describes the buffer limit in bytes."
    SYNTAX      Unsigned32 (1000..12000)

TmnxMobQueueLimit                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobQueueLimit describes the queue limit in bytes."
    SYNTAX      Unsigned32 (1000..12000)

TmnxMobRtrAdvtInterval           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobRtrAdvtInterval describes the router
         advertisement interval in minutes."
    SYNTAX      Unsigned32 (1..60)

TmnxMobRtrAdvtLifeTime           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobRtrAdvtLifeTime describes the router
         advertisement life time in hours."
    SYNTAX      Unsigned32 (1..24)

TmnxMobAddrScheme                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobAddrScheme describes the addressing scheme. If
         the value is set to 'stateful', User Equipment (UE) uses DHCPv6 to get
         IPv6 address. If the value is set to 'stateless', UE uses ICMPv6 to
         get IPv6 address."
    SYNTAX      INTEGER {
        stateful  (1),
        stateless (2)
    }

TmnxMobQciValue                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobQciValue describes the QoS Class Identifier (QCI)
         value."
    SYNTAX      Unsigned32 (1..9)

TmnxMobQciValueOrZero            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobQciValueOrZero describes the QoS Class Identifier
         (QCI) value."
    SYNTAX      Unsigned32 (0..9)

TmnxMobArpValue                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobArpValue describes the Allocation and Retention
         Priority (ARP) value."
    SYNTAX      Unsigned32 (1..15)

TmnxMobArpValueOrZero            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobArpValueOrZero describes the Allocation and
         Retention Priority (ARP) value."
    SYNTAX      Unsigned32 (0..15)

TmnxMobApn                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobApn describes the Access Point Name (APN)
         associated with an User Equipment (UE)."
    REFERENCE
        "3GPP TS 23.003 Section 9.1"
    SYNTAX      DisplayString (SIZE (1..100))

TmnxMobApnOrZero                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobApnOrZero describes the Access Point Name (APN)
         associated with an User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (0..100))

TmnxMobApnDomainName             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobApnDomainName holds a DNS Domain Name derived
         from an Access Point Name (APN).

         The maximum size is arbitrarily chosen in order to be large enough to
         hold a Network Identifier of length 63, and small enough to be used as
         index in a table."
    SYNTAX      DisplayString (SIZE (1..108))

TmnxMobImsi                      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobImsi describes the International Mobile
         Subscriber Identity (IMSI) of an User Equipment (UE).

         IMSI is defined as a number consisting of up to 15 BCD digits. The
         first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
         digits are the Mobile Network Code (MNC). The value of MCC determines
         whether the MNC is 2 digits or 3 digits. The remaining digits are the
         Mobile Subscriber Identification Number (MSIN). The internal
         representation of the IMSI is as follows:

         Bits 63-62 are reserved.

         Bits 61-60 indicate the length of the MNC field: 10 indicates a
         2-digit MNC while 11 indicates a 3-digit MNC.

         Bits 59-0 hold the 15 IMSI BCD digits D1-15.

         When the total number of digits in the IMSI is less than 15, the
         nibble 0xf is used a filler.


         IMSI encoding for a 2-digit MNC:

         63          55         47          39                         0

         +-----------+-----------+-----------+-------------------------+

         | 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)

         +-----------+-----------+-----------+-------------------------+


         IMSI encoding for a 3-digit MNC:

         63          55         47          39     35                  0

         +-----------+-----------+-----------+-------------------------+

         | 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)

         +-----------+-----------+-----------+-------------------------+

         Bits 63-56 of the IMSI are carried in octet number 1 of the octet
         string and bits 7-0 are carried in octet number 8 of the octet string."
    SYNTAX      OCTET STRING (SIZE (8))

TmnxMobMsisdn                    ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobMsisdn describes the Mobile Subscriber Integrated
         Services Digital Network (MSISDN) number of an User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (0..15))

TmnxMobImei                      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobImei describes the International Mobile Equipment
         Identity (IMEI) of an User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (0|16))

TmnxMobNai                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobNai describes the Network Address Identifier
         (NAI) of an User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (0..72))

TmnxMobMcc                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobMcc describes the Mobile Country Code (MCC) of an
         User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (3))

TmnxMobMnc                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobMnc describes the Mobile Network Code (MNC) of an
         User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (2|3))

TmnxMobMccOrEmpty                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobMccOrEmpty describes the Mobile Country Code
         (MCC) of an User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (0|3))

TmnxMobMncOrEmpty                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobMncOrEmpty describes the Mobile Network Code
         (MNC) of an User Equipment (UE)."
    SYNTAX      DisplayString (SIZE (0|2|3))

TmnxMobUeState                   ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobUeState describes the state of an User Equipment
         (UE)."
    SYNTAX      INTEGER {
        idle    (1),
        active  (2),
        paging  (3),
        init    (4),
        suspend (5),
        ddnDamp (6)
    }

TmnxMobUeRat                     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobUeRat describes the Radio Access Type (RAT) of an
         User Equipment (UE)."
    SYNTAX      INTEGER {
        utran   (1),
        geran   (2),
        wlan    (3),
        gan     (4),
        hspa    (5),
        eutran  (6),
        ehrpd   (7),
        hrpd    (8),
        oneXrtt (9),
        umb     (10)
    }

TmnxMobUeSubType                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobUeSubType describes the subscription type of User
         Equipment (UE)."
    SYNTAX      INTEGER {
        homer   (1),
        roamer  (2),
        visitor (3)
    }

TmnxMobPdnType                   ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPdnType describes the type of a Packet Data
         Network (PDN)."
    SYNTAX      INTEGER {
        ipv4   (1),
        ipv6   (2),
        ipv4v6 (3)
    }

TmnxMobPgwSigProtocol            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPgwSigProtocol describes the signaling protocol
         used on S5 or S8 reference point."
    SYNTAX      INTEGER {
        gtp  (1),
        pmip (2)
    }

TmnxMobPdnSessionState           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPdnSessionState describes the feedback signaling
         message (FSM) state of a Packet Data Network (PDN) session."
    SYNTAX      INTEGER {
        invalid          (0),
        init             (1),
        waitPcrfResponse (2),
        waitPgwResponse  (3),
        waitEnodebUpdate (4),
        connected        (5),
        ulDelPending     (6),
        dlDelPending     (7),
        idleMode         (8),
        pageMode         (9),
        dlHandover       (10),
        incomingHandover (11),
        outgoingHandover (12),
        stateMax         (13)
    }

TmnxMobPdnSessionEvent           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPdnSessionEvent describes the feedback signaling
         message (FSM) event of a Packet Data Network (PDN) session."
    SYNTAX      INTEGER {
        sessionInvalid            (0),
        gtpCreateSessReq          (1),
        gtpUpdateBearerReq        (2),
        gtpDeleteSessReq          (3),
        gtpDeleteBearerResp       (4),
        gtpUpdateBearerResp       (5),
        gtpModifyActiveToIdle     (6),
        gtpResrcAllocCmd          (7),
        gtpModifyQosCmd           (8),
        gtpX1eNodeBTeidUpdate     (9),
        gtpX2SrcSgwDeleteSessReq  (10),
        gtpS1CreateIndirectTunnel (11),
        dlPktRecvIndication       (12),
        dlPktNotificationAck      (13),
        dlPktNotificationFail     (14),
        pcrfSessEstResp           (15),
        pcrfSessTerminateRsp      (16),
        pcrfProvQosRules          (17),
        pmipSessResp              (18),
        pmipSessUpdate            (19),
        pmipSessDeleteRsp         (20),
        pmipSessDeleteReq         (21),
        eventMax                  (22)
    }

TmnxMobBearerId                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobBearerId describes the bearer identifier."
    SYNTAX      Unsigned32 (1..15)

TmnxMobBearerType                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobBearerType describes the type of a bearer."
    SYNTAX      INTEGER {
        default   (1),
        dedicated (2)
    }

TmnxMobQci                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobQci describes the QoS Class Identifier."
    SYNTAX      Unsigned32 (0..9)

TmnxMobExtQci                    ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobQci describes the QoS Class Identifier extended
         range."
    SYNTAX      Unsigned32 (0..255)

TmnxMobArp                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobArp describes the QoS parameter, Allocation and
         Retention Priority (ARP)."
    SYNTAX      Unsigned32 (0..15)

TmnxMobSdf                       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobSdf describes the number of Service Data Flows
         (SDFs)."
    SYNTAX      Unsigned32 (0..255)

TmnxMobSdfFilter                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobSdfFilter describes a IP filter in a Service Data
         Flow (SDF) or Traffic Flow Template (TFT)."
    SYNTAX      Unsigned32 (0..16)

TmnxMobSdfFilterNum              ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobSdfFilterNum describes the number of IP filters."
    SYNTAX      Unsigned32 (0..16)

TmnxMobSdfRuleName               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobSdfRuleName describes the policy rule name of a
         Service Data Flow (SDF)."
    SYNTAX      DisplayString (SIZE (1..64))

TmnxMobSdfFilterDirection        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobSdfFilterDirection describes the direction on
         which a Service Data Flow (SDF) filter rule is valid."
    SYNTAX      INTEGER {
        preRel7  (0),
        downLink (1),
        upLink   (2),
        biDir    (3)
    }

TmnxMobSdfFilterProtocol         ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobSdfFilterProtocol describes IPv4 protocol or IPv6
         next header on which Service Data Flow (SDF) filter matches."
    SYNTAX      INTEGER {
        any            (-1),
        ipv6HopByOpOpt (0),
        icmp           (1),
        igmp           (2),
        ggp            (3),
        ip             (4),
        st             (5),
        tcp            (6),
        cbt            (7),
        egp            (8),
        igp            (9),
        bbnRccMon      (10),
        nvp2           (11),
        pup            (12),
        argus          (13),
        emcon          (14),
        xnet           (15),
        chaos          (16),
        udp            (17),
        mux            (18),
        dcnMeas        (19),
        hmp            (20),
        prm            (21),
        xnsIdp         (22),
        trunk1         (23),
        trunk2         (24),
        leaf1          (25),
        leaf2          (26),
        rdp            (27),
        irdp           (28),
        isoTp4         (29),
        netblt         (30),
        mfeNsp         (31),
        meritInp       (32),
        dccp           (33),
        pc3            (34),
        idpr           (35),
        xtp            (36),
        ddp            (37),
        idprCmtp       (38),
        tpplusplus     (39),
        il             (40),
        ipv6           (41),
        sdrp           (42),
        ipv6Route      (43),
        ipv6Frag       (44),
        idrp           (45),
        rsvp           (46),
        gre            (47),
        dsr            (48),
        bna            (49),
        esp            (50),
        ah             (51),
        iNlsp          (52),
        swipe          (53),
        narp           (54),
        mobile         (55),
        tlsp           (56),
        skip           (57),
        ipv6Icmp       (58),
        ipv6NoNxt      (59),
        ipv6Opts       (60),
        anyHostIntl    (61),
        cftp           (62),
        anyLocalNet    (63),
        satExpak       (64),
        kryptolan      (65),
        rvd            (66),
        ippc           (67),
        anyDFS         (68),
        satMon         (69),
        visa           (70),
        ipcv           (71),
        cpnx           (72),
        cphb           (73),
        wsn            (74),
        pvp            (75),
        brSatMon       (76),
        sunNd          (77),
        wbMon          (78),
        wbExpak        (79),
        isoIp          (80),
        vmtp           (81),
        secureVmpt     (82),
        vines          (83),
        ttp            (84),
        nsfnetIgp      (85),
        dgp            (86),
        tcf            (87),
        eiGrp          (88),
        ospfIgp        (89),
        spriteRpc      (90),
        larp           (91),
        mtp            (92),
        ax25           (93),
        ipip           (94),
        micp           (95),
        sccSp          (96),
        etherIp        (97),
        encap          (98),
        anyPEC         (99),
        gmtp           (100),
        ifmp           (101),
        pnni           (102),
        pim            (103),
        aris           (104),
        scps           (105),
        qnx            (106),
        activeNet      (107),
        ipComp         (108),
        snp            (109),
        compaqPeer     (110),
        ipxInIp        (111),
        vrrp           (112),
        pgm            (113),
        any0hop        (114),
        l2tp           (115),
        ddx            (116),
        iatp           (117),
        stp            (118),
        srp            (119),
        uti            (120),
        smp            (121),
        sm             (122),
        ptp            (123),
        isis           (124),
        fire           (125),
        crtp           (126),
        crudp          (127),
        sscopmce       (128),
        iplt           (129),
        sps            (130),
        pipe           (131),
        sctp           (132),
        fc             (133),
        rsvpE2eIgnore  (134),
        mobHeader      (135),
        udpLite        (136),
        mplsInIp       (137),
        manet          (138),
        hip            (139),
        shim6          (140)
    }

TmnxMobPathMgmtState             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPathMgmtState describes the state of a path for a
         reference point. A value of 'reqTimeOut' indicates that the peer is
         not replying to the Echo Request messages the SGW is sending out."
    SYNTAX      INTEGER {
        disabled   (0),
        up         (1),
        reqTimeOut (2),
        fault      (3),
        idle       (4),
        restart    (5)
    }

TmnxMobDiaPathMgmtState          ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDiaPathMgmtState describes the state of a path
         for a diameter connection."
    SYNTAX      INTEGER {
        shutDown     (0),
        shuttingDown (1),
        inactive     (2),
        active       (3)
    }

TmnxMobDiaDetailPathMgmtState    ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDiaDetailPathMgmtState describes the detail state
         of a path for a diameter connection."
    SYNTAX      INTEGER {
        error           (0),
        idle            (1),
        closed          (2),
        localShutdown   (3),
        remoteClosing   (4),
        waitConnAck     (5),
        waitCea         (6),
        open            (7),
        openCoolingDown (8),
        waitDns         (9)
    }

TmnxMobGwType                    ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobGwType describes the mobile gateway type."
    SYNTAX      INTEGER {
        sgw    (1),
        pgw    (2),
        wlanGw (3)
    }

TmnxMobChargingProfile           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobChargingProfile describes the charging trigger
         rules applied for generating Charging Data Records (CDR) for
         subscribers."
    SYNTAX      Unsigned32 (0..255)

TmnxMobChargingProfileOrInherit  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobChargingProfileOrInherit describes the charging
         trigger rules applied for generating Charging Data Records (CDR) for
         subscribers. A value of '-1' indicates that identifier will be
         inherited from another object that is usually in another mib table."
    SYNTAX      Integer32 (-1 | 0..255)

TmnxMobAuthType                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobAuthType describes the authentication type used
         by mobile gateways."
    SYNTAX      INTEGER {
        radius   (1),
        diameter (2)
    }

TmnxMobAuthUserName              ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobAuthUserName describes the user name used in
         authentication requests by mobile gateways."
    SYNTAX      INTEGER {
        imsi   (1),
        msisdn (2),
        pco    (3)
    }

TmnxMobProfGbrRate               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfGbrRate describes the Guaranteed Bit Rate
         (GBR) value in kilobits per second(kbps)."
    SYNTAX      Unsigned32 (0..100000)

TmnxMobProfMbrRate               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobProfMbrRate describes the Maximum Bit Rate (MBR)
         value in kilobits per second(kbps)."
    SYNTAX      Unsigned32 (0..100000)

TmnxMobPeerType                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPeerType describes the type of the mobile gateway
         peer as Serving Gateway (SGW), Packet Data Network Gateway (PGW) or
         High Rate Packet Data (HRPD) Serving Gateway (HSGW)."
    SYNTAX      INTEGER {
        sgw  (1),
        pgw  (2),
        hsgw (3)
    }

TmnxMobRfAcctLevel               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxMobRfAcctLevel data type is an enumerated integer that describes
         the accounting level."
    SYNTAX      INTEGER {
        pdnLevel (1),
        qciLevel (2)
    }

TmnxMobProfPolReportingLevel     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxMobProfPolReportingLevel data type is an enumerated integer that
         describes the Reporting level for the Policy and Charging Control
         (PCC) rule."
    SYNTAX      INTEGER {
        servId    (1),
        ratingGrp (2)
    }

TmnxMobProfPolChargingMethod     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxMobProfPolChargingMethod data type is an enumerated integer that
         describes the Charging Method for the Policy and Charging Control
         (PCC) rule. A variable of this type could be set to 'online' charging
         method, 'offline' charging method or 'both'.

         If the variable is set to 'profChargingMtd' the charging method is set
         to 'offline' if 'tmnxMobProfPgwChrgOffLineState' is set to 'enabled',
         the charging method is set to 'online' if 'tmnxMobProfPgwChrgGyState'
         is set to 'enabled' and the charging method is set to 'both' if both
         'tmnxMobProfPgwChrgOffLineState' and 'tmnxMobProfPgwChrgGyState' are
         set to 'enabled'."
    SYNTAX      INTEGER {
        profChargingMtd (0),
        online          (1),
        offline         (2),
        both            (3)
    }

TmnxMobProfPolMeteringMethod     ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "TmnxMobProfPolMeteringMethod data type is an enumerated integer that
         describes the Metering Method for the Policy and Charging Control
         (PCC) rule."
    SYNTAX      INTEGER {
        timeBased (1),
        volBased  (2),
        both      (3)
    }

TmnxMobServerState               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobServerState describes the state of a server
         connected with a mobile gateway."
    SYNTAX      INTEGER {
        na   (0),
        up   (1),
        down (2)
    }

TmnxMobChargingBearerType        ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobChargingBearerType describes the type of a bearer
         context used in charging applications."
    SYNTAX      INTEGER {
        home     (1),
        visiting (2),
        roaming  (3)
    }

TmnxMobChargingLevel             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobChargingLevel describes the level where the
         charging is done."
    SYNTAX      INTEGER {
        pdn    (1),
        bearer (2)
    }

TmnxMobIpCanType                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobIpCanType describes the type of Internet Protocol
         Connectivity Access Network (IP-CAN) session as Evolved Packet Core
         (epc3gpp) or GPRS (gprs3gpp)."
    SYNTAX      INTEGER {
        epc3gpp  (1),
        gprs3gpp (2)
    }

TmnxMobStaticPolPrecedence       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobStaticPolPrecedence describes the precedence
         value for a static policy configured in the system."
    SYNTAX      Unsigned32 (1..65536)

TmnxMobStaticPolPrecedenceOrZero ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobStaticPolPrecedence describes the precedence
         value for a static policy configured in the system."
    SYNTAX      Unsigned32 (0..65535)

TmnxMobDualStackPref             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDualStackPref describes the preference in a dual
         IP stack.

         The value 'useCplane' specifies that the value is inherited from the
         preference in a dual IP stack on control plane."
    SYNTAX      INTEGER {
        ipv4      (1),
        ipv6      (2),
        useCplane (3)
    }

TmnxMobDfPeerId                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobDfPeerId identifies Delivery Function (DF) peer
         for the mobile gateways."
    SYNTAX      Unsigned32 (1..16)

TmnxMobLiTarget                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobLiTarget describes the target for the
         interception.

         The target can be of type International Mobile Subscriber Identity
         (IMSI), Mobile Subscriber Integrated Services Digital Network (MSISDN)
         or International Mobile Equipment Identity (IMEI).

         IMSI is defined as a number consisting of up to 15 BCD digits. The
         first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
         digits are the Mobile Network Code (MNC). The value of MCC determines
         whether the MNC is 2 digits or 3 digits. The remaining digits are the
         Mobile Subscriber Identification Number (MSIN). The internal
         representation of the IMSI is as follows:

         Bits 63-62 are reserved.

         Bits 61-60 indicate the length of the MNC field: 10 indicates a
         2-digit MNC while 11 indicates a 3-digit MNC.

         Bits 59-0 hold the 15 IMSI BCD digits D1-15.

         When the total number of digits in the IMSI is less than 15, the
         nibble 0xf is used a filler.

         IMSI encoding for a 2-digit MNC:

         63          55         47          39                         0

         +-----------+-----------+-----------+-------------------------+

         | 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)

         +-----------+-----------+-----------+-------------------------+


         IMSI encoding for a 3-digit MNC:

         63          55         47          39     35                  0

         +-----------+-----------+-----------+-------------------------+

         | 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)

         +-----------+-----------+-----------+-------------------------+

         Bits 63-56 of the IMSI are carried in octet number 1 of the octet
         string and bits 7-0 are carried in octet number 8 of the octet string."
    SYNTAX      OCTET STRING (SIZE (8))

TmnxMobLiTargetType              ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobLiTargetType describes the types of target in
         Lawful Interception (LI)."
    SYNTAX      INTEGER {
        imsi   (1),
        msisdn (2),
        imei   (3)
    }

TmnxMobUeId                      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobUeId describes the identity of an User Equipment.
         TmnxMobUeId can be of the following types: International Mobile
         Subscriber Identity (IMSI), International Mobile station Equipment
         Identity (IMEI), Mobile Subscriber Integrated Services Digital network
         Number (MSISDN). IMSI, IMEI, MSISDN are defined in 3GPP TS 23.003.

         IMSI is defined as a number consisting of up to 15 BCD digits. The
         first 3 digits are the Mobile Country Code (MCC). The next 2 or 3
         digits are the Mobile Network Code (MNC). The value of MCC determines
         whether the MNC is 2 digits or 3 digits. The remaining digits are the
         Mobile Subscriber Identification Number (MSIN).

         IMEI is defined as a number consisting of up to 16 BCD digits. The
         first 8 digits consists of Type Allocation Code (TAC). The next 6
         digits consist of Serial Number (SNR) which could be followed by a
         Check Digit (CD) or Spare Digit (SD) of size 1 digit or by a Software
         Version Number (SVN) of size 2 digits.

         MSISDN is defined as a number consisting of 9 to 15 BCD digits. MSISDN
         consists of Country Code (CC) followed by National Destination Code
         (NDC) and Subscriber Number (SN).

         Bits 63-56 of the IMSI or IMEI or MSISDN are carried in octet number 1
         of the octet string and bits 7-0 are carried in octet number 8 of the
         octet string.

         The internal representation of the IMSI is as follows:

         Bits 63-62 are reserved.

         Bits 61-60 indicate the length of the MNC field: 10 indicates a
         2-digit MNC while 11 indicates a 3-digit MNC.

         Bits 59-0 hold the 15 IMSI BCD digits D1-15.

         When the total number of digits in the IMSI is less than 15, the
         nibble 0xf is used a filler.

         IMSI encoding for a 2-digit MNC:


         63          55         47          39                         0

         +-----------+-----------+-----------+-------------------------+

         | 0010| MCC1| MCC2| MCC3| MNC1| MNC2| MSIN (up to 10 digits)

         +-----------+-----------+-----------+-------------------------+


         IMSI encoding for a 3-digit MNC:


         63          55         47          39     35                  0

         +-----------+-----------+-----------+-------------------------+

         | 0011| MCC1| MCC2| MCC3| MNC1| MNC2| MNC3| MSIN (up to 9 digits)

         +-----------+-----------+-----------+-------------------------+


         The internal representation of the IMEI and MSISDN is as follows:

         IMEI encoding:


         63          55         31                      7       0

         +-----------+-----------+----------------------+-------+

         |          TAC          |         SNR          |  SNV  |
         |N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|

         +-----------+-----------+-----------+------------------+


         MSISDN encoding:

         63          55         31                      7       0

         +-----------+-----------+----------------------+-------+

         |   CC   |   NDC  |                  SN                |
         |N2|N1|N4|N3|N6|N5|N8|N7|N10|N9|N12|N11|N14|N13|N16|N15|

         +-----------+-----------+-----------+------------------+

         When the total number of digits in the IMEI or MSISDN is less than 15,
         the nibble 0x0 is used a filler.

         In each byte both nibbles are swapped and it is stored as shown in the
         above format. For example, in the format N3 & N4 present the nibble
         number 3 and 4 respectively and they are stored in reverse order.

         When the total number of digits are odd in IMEI and MSISDB, the last
         digit will be paired with nibble 0xf."
    SYNTAX      OCTET STRING (SIZE (8))

TmnxMobUeIdType                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobUeIdType describes the types of identification
         for User Equipment (UE)."
    SYNTAX      INTEGER {
        imsi   (0),
        imei   (1),
        msisdn (2)
    }

TmnxMobImsiStr                   ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobImsiStr describes the International Mobile
         Subscriber Identity (IMSI) of a User Equipment (UE)."
    REFERENCE
        "3GPP TS 23.003 Numbering, addressing and identification,
         section 2.2 Composition of IMSI."
    SYNTAX      DisplayString (SIZE (0|9..15))

TmnxMobRatingGrpState            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobRatingGrpState describes the state of a rating
         group.

         allowFlow - Allow the traffic to flow disallowFlow - Disallow the
         traffic to Flow redWebPortal - Redirect the traffic to web portal
         allowResRules - Allow restricted rules iom1stPktTrigger - Get the
         trigger from on IOM on arrival of 1st packet dis1stPktTrigger -
         Disable 1st packet trigger and allow the traffic creditsToppedUp -
         Credits topped up waitForFpt - Unblocked and waiting for First Packet
         Trigger (FPT)"
    SYNTAX      INTEGER {
        allowFlow        (1),
        disallowFlow     (2),
        redWebPortal     (3),
        allowResRules    (4),
        iom1stPktTrigger (5),
        dis1stPktTrigger (6),
        creditsToppedUp  (7),
        waitForFpt       (8)
    }

TmnxMobPresenceState             ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPresenceState describes the whether the given
         field is present."
    SYNTAX      INTEGER {
        absent  (0),
        present (1)
    }

TmnxMobPdnGyChrgTriggerType      ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPdnGyChrgTriggerType describes type of the
         trigger activated by the Online Charging System (OCS).

         sgsnIpAddrRecvd       - Change in Serving GPRS Support Node (SGSN) IP
                                 address
         qosRecvd              - Change in Quality of Service (QoS)
         locRecvd              - Location Change
         ratRecvd              - Router Advertisement Trigger (RAT) Change
         qosTrfClsRecvd        - Change in QoS Traffic class
         qosRlbClsRecvd        - Change in QoS Reliability class
         qosDlyClsRecvd        - Change in QoS Delay class
         qosPeakThrptRecvd     - Change in QoS Peak Throughput
         qosPrcClsRecvd        - Change in QoS Precedence class
         qosMeanTrptRecvd      - Change in QoS Mean Throughput
         qosMxBtRtUplnkRecvd   - Change in QoS MBR for Uplink
         qosMxBtRtDllnkRecvd   - Change in QoS MBR for Downlink
         qosResBerRecvd        - Change in QoS Residual Bit Error Rate (BER)
         qosSduErrRatRecvd     - Change in QoS Service Data Unit (SDU) Error
                                 Ratio class
         qosTransDelayRecvd    - Change in QoS Transfer Delay
         qosTrfHndPriRecvd     - Change in QoS Traffic Handling Priority
         qosGrtBtRtUplnkRecvd  - Change in QoS Guaranteed Bit Rate (GBR) for
                                 Uplink
         qosGrtBtRtDllnkRecvd  - Change in QoS GBR for Downlink
         locMccRecvd           - Change in Location Mobile Country Code (MCC)
         locMncRecvd           - Change in Location Mobile Network Code (MNC)
         locRacRecvd           - Change in Location Routing Area Code (RAC)
         locLacRecvd           - Change in Location Location Area Code (LAC)
         locCellIdRecvd        - Change in Location Cell ID
         medCompRecvd          - Change in Media Composition
         partcNmbRecvd         - Change in Participants' number
         thrldPartcNmbRecvd    - Change in Threshold of Participants' number
         usrPartcTypeRecvd     - Change in User Participating Type
         servCondRecvd         - Change in Service Condition
         servNodeRecvd         - Change in Service Node
         usrCsgInfoRecvd       - Change in User Closed Subscription Group (CSG)
                                 Information"
    SYNTAX      INTEGER {
        sgsnIpAddrRecvd      (0),
        qosRecvd             (1),
        locRecvd             (2),
        ratRecvd             (3),
        qosTrfClsRecvd       (4),
        qosRlbClsRecvd       (5),
        qosDlyClsRecvd       (6),
        qosPeakThrptRecvd    (7),
        qosPrcClsRecvd       (8),
        qosMeanTrptRecvd     (9),
        qosMxBtRtUplnkRecvd  (10),
        qosMxBtRtDllnkRecvd  (11),
        qosResBerRecvd       (12),
        qosSduErrRatRecvd    (13),
        qosTransDelayRecvd   (14),
        qosTrfHndPriRecvd    (15),
        qosGrtBtRtUplnkRecvd (16),
        qosGrtBtRtDllnkRecvd (17),
        locMccRecvd          (18),
        locMncRecvd          (19),
        locRacRecvd          (20),
        locLacRecvd          (21),
        locCellIdRecvd       (22),
        medCompRecvd         (23),
        partcNmbRecvd        (24),
        thrldPartcNmbRecvd   (25),
        usrPartcTypeRecvd    (26),
        servCondRecvd        (27),
        servNodeRecvd        (28),
        usrCsgInfoRecvd      (29)
    }

TmnxMobPdnRefPointType           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobPdnRefPointType describes the types of reference
         point."
    SYNTAX      INTEGER {
        s5  (1),
        s8  (2),
        gn  (3),
        s2a (4),
        gp  (5)
    }

TmnxMobService                   ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobService describes the Service and Protocol
         service names for 3GPP."
    REFERENCE
        "3GPP TS 23.003 Section 19.4.3"
    SYNTAX      DisplayString (SIZE (0..80))

TmnxMobServRefPointType          ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobServRefPointType describes the types of reference
         point."
    SYNTAX      INTEGER {
        s5  (1),
        s8  (2),
        s2a (4)
    }

TmnxMobAccessType                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobAccessType describes the various access types.
         eps     - evolved packet system.
         gprs    - general packet radio services.
         non3gpp - trusted non-3gpp network such as evolved High Rate
                   Packet Data (eHRPD) and untrusted non-3gpp network."
    SYNTAX      INTEGER {
        eps     (1),
        gprs    (2),
        non3gpp (3)
    }

TmnxMobUeStrPrefix               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxMobUeStrPrefix describes the prefix for
         International Mobile Subscriber Identity (IMSI) or Mobile Subscriber
         Integrated Services Digital Network (MSISDN) of an User Equipment
         (UE)."
    SYNTAX      DisplayString (SIZE (4..15))

END