path: root/MIBS/nokia/TIMETRA-SAP-MIB

TIMETRA-SAP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    AtmTrafficDescrParamIndex,
    AtmVcIdentifier, AtmVpIdentifier
                                                         FROM ATM-TC-MIB
    InterfaceIndexOrZero
                                                         FROM IF-MIB
    InetAddress, InetAddressIPv6,
    InetAddressPrefixLength, InetAddressType
                                                         FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Counter32, Counter64, Gauge32,
    Integer32, IpAddress, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    DisplayString, MacAddress, RowStatus,
    TEXTUAL-CONVENTION, TimeStamp,
    TruthValue
                                                         FROM SNMPv2-TC
    TmnxEsaIdOrZero, TmnxEsaVmIdOrZero,
    TmnxHwIndexOrZero, tmnxCardSlotNum,
    tmnxChassisIndex, tmnxFPNum
                                                         FROM TIMETRA-CHASSIS-MIB
    TConfigOrVsdFilterID, TFilterID
                                                         FROM TIMETRA-FILTER-MIB
    timetraSRMIBModules
                                                         FROM TIMETRA-GLOBAL-MIB
    tmnxPortCemStatsReportAlarm
                                                         FROM TIMETRA-PORT-MIB
    TmnxMcFrClassIndex, tQosPolicerLevel,
    tSapEgrPolicerId, tSapIngPolicerId,
    tSchedulerPolicyName,
    tVirtualSchedulerName
                                                         FROM TIMETRA-QOS-MIB
    BridgeId, CemSapEcid, CemSapReportAlarm,
    ConfigStatus, L2ptProtocols,
    MstiInstanceIdOrZero, MvplsPruneState,
    ServObjDesc, ServObjName,
    ServShcvOperState, ServType,
    StpExceptionCondition, StpPortRole,
    StpProtocol, TQosQueueAttribute,
    TSapEgrQueueId, TSapIngQueueId,
    TStpPortState, TVirtSchedAttribute,
    TdmOptionsCasTrunkFraming,
    TlsBpduTranslation, TlsLimitMacMove,
    TlsLimitMacMoveLevel, VpnId, custId,
    hostConnectivityChAddr,
    hostConnectivityCiAddr,
    hostConnectivityCiAddrType,
    protectedMacForNotify,
    staticHostDynamicMacConflict,
    staticHostDynamicMacIpAddress,
    svcDhcpClientLease, svcDhcpCoAError,
    svcDhcpLseStateNewChAddr,
    svcDhcpLseStateNewCiAddr,
    svcDhcpLseStateOldChAddr,
    svcDhcpLseStateOldCiAddr,
    svcDhcpLseStatePopulateError,
    svcDhcpPacketProblem, svcDhcpProxyError,
    svcDhcpSubAuthError, svcId,
    svcOperGrpName, svcTlsBackboneVplsSvcId,
    svcTlsMacMoveMaxRate, svcVpnId,
    tlsDHCPClientLease,
    tlsDhcpLseStateNewChAddr,
    tlsDhcpLseStateNewCiAddr,
    tlsDhcpLseStateOldChAddr,
    tlsDhcpLseStateOldCiAddr,
    tlsDhcpPacketProblem,
    tlsFdbBackboneDstMac,
    tlsFdbEvpnMplsEthSegId,
    tlsFdbEvpnMplsLabel,
    tlsFdbEvpnMplsTEPAddr,
    tlsFdbEvpnMplsTEPAddrType, tlsFdbType,
    tlsMstiInstanceId, tmnxCustomerBridgeId,
    tmnxCustomerRootBridgeId,
    tmnxOtherBridgeId, tmnxServConformance,
    tmnxServNotifications, tmnxServObjs,
    tstpTraps
                                                         FROM TIMETRA-SERV-MIB
    DateAndTimeOrEmpty, QTag,
    QTagFullRangeOrNone, ServiceAdminStatus,
    ServiceOperStatus, SvcISID,
    TAdaptationRule, TBurstLimit,
    TBurstPercentOrDefault, TBurstSize,
    TBurstSizeBytes, TCIRPercentOverride,
    TCpmProtPolicyID,
    TCpmProtPolicyIDOrDefault,
    TDSCPNameOrEmpty,
    TEgrHsmdaPerPacketOffsetOvr,
    TEgrPolicerId, TEgressHsmdaCounterId,
    TEgressHsmdaQueueId,
    TEgressPerPacketOffsetOvr,
    TEgressPolicerId, TEgressQueueId,
    TFCSet, THPolCIRRateOverride,
    THPolPIRRateOverride,
    THPolVirtualScheCIRRate,
    THPolVirtualSchePIRRate,
    THSMDABurstSizeBytesOverride,
    THsmdaCIRKRateOverride,
    THsmdaPIRKRateOverride,
    THsmdaWrrWeightOverride,
    TIngHsmdaPerPacketOffsetOvr,
    TIngPolicerId, TIngressHsmdaCounterId,
    TIngressHsmdaQueueId, TIngressPolicerId,
    TIngressQueueId, TItemDescription,
    TItemLongDescription,
    TLNamedItemOrEmpty, TNamedItem,
    TNamedItemOrEmpty, TPIRPercentOverride,
    TPerPacketOffsetOvr,
    TPlcrBurstSizeBytesOverride,
    TPolicerBurstSizeBytesOverride,
    TPolicyStatementNameOrEmpty,
    TPortSchedulerAggRateLimitPIR,
    TPortSchedulerPIR,
    TQosQGrpInstanceIDorZero,
    TQosQueueCIRRate, TQosQueuePIRRate,
    TSapEgrEncapGroupActionType,
    TSapEgrEncapGroupType,
    TSapEgrEncapGrpQosPolicyIdOrZero,
    TSapEgressPolicyID, TSapIngressPolicyID,
    TTmplPolicyID, TWeight, TmnxActionType,
    TmnxAdminState, TmnxAncpStringOrZero,
    TmnxAuthAlgorithm, TmnxBsxAarpIdOrZero,
    TmnxBsxAarpServiceRefType,
    TmnxBsxTransPrefPolicyIdOrZero,
    TmnxBsxTransitIpPolicyIdOrZero,
    TmnxCustId, TmnxDefInterDestIdSource,
    TmnxDefSubIdSource,
    TmnxDistCpuProtActionDuration,
    TmnxDistCpuProtProtocolId,
    TmnxDistCpuProtState,
    TmnxEgrPolicerStatMode,
    TmnxEgrPolicerStatModeOverride,
    TmnxEnabledDisabled, TmnxEncapVal,
    TmnxEncrAlgorithm,
    TmnxEvpnMHEthSegStatus, TmnxHigh32,
    TmnxIPsecDirection, TmnxIPsecKeyingType,
    TmnxISID, TmnxIgmpVersion,
    TmnxIkePolicyDHGroupOrZero,
    TmnxIngPolicerStatMode,
    TmnxIngPolicerStatModeOverride,
    TmnxIsidMFibStatus,
    TmnxL2tpTunnelGroupNameOrEmpty,
    TmnxLagPerLinkHashClass,
    TmnxLagPerLinkHashWeight,
    TmnxLinkMapProfileIdOrZero, TmnxLow32,
    TmnxManagedRouteStatus, TmnxOperState,
    TmnxPortID, TmnxQosRateHigh32,
    TmnxQosRateLow32, TmnxRipListenerStatus,
    TmnxSapAASubScope, TmnxServId,
    TmnxSubIdentStringOrEmpty,
    TmnxSubShcvAction, TmnxSubShcvInterval,
    TmnxSubShcvRetryCount,
    TmnxSubShcvRetryTimeout, TmnxVRtrID,
    TmnxVRtrIDOrZero, TmnxVcIdOrNone,
    TmnxVeId
                                                         FROM TIMETRA-TC-MIB
    ;

timetraSvcSapMIBModule           MODULE-IDENTITY
    LAST-UPDATED "202201200000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia SROS Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision the
         various services of the Nokia SROS system.

         Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this
         document is authorized on the condition that the foregoing copyright
         notice is included.

         This SNMP MIB module (Specification) embodies Nokia's
         proprietary intellectual property.  Nokia retains
         all title and ownership in the Specification, including any
         revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied 'as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "202201200000Z"
    DESCRIPTION
        "Rev 19.0               20 January 2022 00:00
         22 release of the TIMETRA-SAP-MIB."

    REVISION    "201903200000Z"
    DESCRIPTION
        "Rev 19.0               20 March 2019 00:00
         19.0 release of the TIMETRA-SAP-MIB."

    REVISION    "201703200000Z"
    DESCRIPTION
        "Rev 15.0               20 March 2017 00:00
         15.0 release of the TIMETRA-SAP-MIB."

    REVISION    "201502200000Z"
    DESCRIPTION
        "Rev 14.0               20 Feb 2015 00:00
         14.0 release of the TIMETRA-SAP-MIB."

    REVISION    "201402200000Z"
    DESCRIPTION
        "Rev 13.0               20 Feb 2014 00:00
         13.0 release of the TIMETRA-SAP-MIB."

    REVISION    "201401010000Z"
    DESCRIPTION
        "Rev 12.0                1 Jan 2014 00:00
         12.0 release of the TIMETRA-SAP-MIB."

    REVISION    "201102010000Z"
    DESCRIPTION
        "Rev 9.0                 1 Feb 2011 00:00
         9.0 release of the TIMETRA-SAP-MIB."

    REVISION    "200902280000Z"
    DESCRIPTION
        "Rev 7.0                28 Feb 2009 00:00
         7.0 release of the TIMETRA-SAP-MIB."

    REVISION    "200807010000Z"
    DESCRIPTION
        "Rev 6.1                01 Jul 2008 00:00
         6.1 release of the TIMETRA-SAP-MIB."

    REVISION    "200710010000Z"
    DESCRIPTION
        "Rev 1.0                01 OCT 2007 00:00
         1.0 release of the TIMETRA-SAP-MIB from TIMETRA-SERV-MIB."

    ::= { timetraSRMIBModules 55 }

TmnxSapAtmEncapsulation          ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxSapAtmEncapsulation data type is an enumerated integer that
         specifies the data encapsulation used over the AAL5 SSCS layer.

         The definition references RFC 2684 Multiprotocol Encapsulation over
         ATM AAL5 and the ATM Forum LAN Emulation specification."
    SYNTAX      INTEGER {
        vcMultiplexRoutedProtocol      (1),
        vcMultiplexBridgedProtocol8023 (2),
        llcSnapRoutedProtocol          (7),
        multiprotocolFrameRelaySscs    (8),
        unknown                        (10),
        llcSnapBridgedProtocol8023     (11),
        vcMultiplexPpp                 (12),
        llcNlpidPpp                    (13),
        auto                           (14)
    }

TmnxSapSubscriberLimit           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxSapSubscriberLimit data type is an enumerated integer that
         specifies the maximum number of subscribers allowed on a SAP."
    SYNTAX      Unsigned32 (0..131071)

TmnxVlanGroupId                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxVlanGroupId data type is an enumerated integer that specifies
         the VLAN range group identifier."
    SYNTAX      Unsigned32 (1..4094)

TmnxSapInstStatus                ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxSapInstStatus data type is an enumerated integer that
         indicates status of the SAP instantiating other SAPs controlled by
         this SAP."
    SYNTAX      INTEGER {
        notApplicable (1),
        complete      (2),
        inProgress    (3),
        failed        (4)
    }

TmnxSapQtagManipulationAction    ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxSapQtagManipulationAction data type is an enumerated integer
         that indicates the action to manipulate the q-tag(s) in the packets:

             notApplicable           (0) - q-tag manipulation action is not allowed on this SAP.
             preserve                (1) - keep all q-tag(s) in packets as received.
             pushOuter               (2) - add outer q-tag with a specific value.
             popOuter                (3) - remove outer q-tag in packets.
             replaceOuter            (4) - replace the outer q-tag with a
                                           specific value.
             popOuterAndInner        (5) - remove both inner and outer q-tags.
             popOuterAndReplaceInner (6) - remove outer q-tag and replace the
                                           inner q-tag with the a specific value
             replaceOuterAndInner    (7) - replace both outer and inner q-tags
                                           with the specified values.
             pushOuterAndInner       (8) - add both outer and inner q-tags with
                                           specific values.
             replaceAndPushOuter     (9) - replace the q-tag and add an outer qtag
                                           with the specified outer q-tag value."
    SYNTAX      INTEGER {
        notApplicable           (0),
        preserve                (1),
        pushOuter               (2),
        popOuter                (3),
        replaceOuter            (4),
        popOuterAndInner        (5),
        popOuterAndReplaceInner (6),
        replaceOuterAndInner    (7),
        pushOuterAndInner       (8),
        replaceAndPushOuter     (9)
    }

TmnxIpTunnelOperState            ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxIpTunnelOperState data type is an enumerated integer that
         describes the values used to identify the current operational state of
         IP Tunnel functional modules."
    SYNTAX      INTEGER {
        unknown      (1),
        inService    (2),
        outOfService (3),
        transition   (4),
        limited      (5)
    }

topologyChangeSapMajorState      NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The    topologyChangeSapMajorState   notification    is
         generated  when  a  SAP has transitioned its state from
         learning  to  forwarding or from forwarding to blocking
         or broken. The spanning tree topology has been modified
         and   it   may   denote  loss  of  customer  access  or
         redundancy.   Check   the   new  topology  against  the
         provisioned  topology  to  determine  the  severity  of
         connectivity loss."
    ::= { tstpTraps 1 }

newRootSap                       NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The  newRootSap  notification is  generated  when  the
         previous  root bridge has been aged out and a new root
         bridge  has  been elected. A new root bridge creates a
         new  spanning  tree topology and it may denote loss of
         customer  access or redundancy. Check the new topology
         against  the  provisioned  topology  to  determine the
         severity of connectivity loss."
    ::= { tstpTraps 2 }

tmnxSapObjs                      OBJECT IDENTIFIER ::= { tmnxServObjs 3 }

sapNumEntries                    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current number of SAPs configured in this device."
    ::= { tmnxSapObjs 1 }

sapBaseInfoTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapBaseInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains basic SAP information."
    ::= { tmnxSapObjs 2 }

sapBaseInfoEntry                 OBJECT-TYPE
    SYNTAX      SapBaseInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapBaseInfoTable 1 }

SapBaseInfoEntry                 ::= SEQUENCE
{
    sapPortId                        TmnxPortID,
    sapEncapValue                    TmnxEncapVal,
    sapRowStatus                     RowStatus,
    sapType                          ServType,
    sapDescription                   TItemLongDescription,
    sapAdminStatus                   ServiceAdminStatus,
    sapOperStatus                    INTEGER,
    sapIngressQosPolicyId            TSapIngressPolicyID,
    sapIngressMacFilterId            TConfigOrVsdFilterID,
    sapIngressIpFilterId             TConfigOrVsdFilterID,
    sapEgressQosPolicyId             TSapEgressPolicyID,
    sapEgressMacFilterId             TFilterID,
    sapEgressIpFilterId              TFilterID,
    sapMirrorStatus                  INTEGER,
    sapIesIfIndex                    InterfaceIndexOrZero,
    sapLastMgmtChange                TimeStamp,
    sapCollectAcctStats              TruthValue,
    sapAccountingPolicyId            Unsigned32,
    sapVpnId                         VpnId,
    sapCustId                        TmnxCustId,
    sapCustMultSvcSite               ServObjName,
    sapIngressQosSchedulerPolicy     ServObjName,
    sapEgressQosSchedulerPolicy      ServObjName,
    sapSplitHorizonGrp               ServObjName,
    sapIngressSharedQueuePolicy      ServObjName,
    sapIngressMatchQinQDot1PBits     INTEGER,
    sapOperFlags                     BITS,
    sapLastStatusChange              TimeStamp,
    sapAntiSpoofing                  INTEGER,
    sapIngressIpv6FilterId           TConfigOrVsdFilterID,
    sapEgressIpv6FilterId            TFilterID,
    sapTodSuite                      TNamedItemOrEmpty,
    sapIngUseMultipointShared        TruthValue,
    sapEgressQinQMarkTopOnly         TruthValue,
    sapEgressAggRateLimit            TPortSchedulerAggRateLimitPIR,
    sapEndPoint                      ServObjName,
    sapIngressVlanTranslation        INTEGER,
    sapIngressVlanTranslationId      Integer32,
    sapSubType                       INTEGER,
    sapCpmProtPolicyId               TCpmProtPolicyID,
    sapCpmProtMonitorMac             TruthValue,
    sapEgressFrameBasedAccounting    TruthValue,
    sapIngressAggRateLimit           TPortSchedulerPIR,
    sapEgressHsmdaShaperOverride     TNamedItemOrEmpty,
    sapIngressHsmdaPacketOffOvr      TIngHsmdaPerPacketOffsetOvr,
    sapEgressHsmdaPacketOffOverride  TEgrHsmdaPerPacketOffsetOvr,
    sapCallingStationId              DisplayString,
    sapIsaAaApplicationProfile       ServObjName,
    sapIngPolicerPolicy              TNamedItemOrEmpty,
    sapEgrPolicerPolicy              TNamedItemOrEmpty,
    sapTmplUsed                      TNamedItemOrEmpty,
    sapEthRingIndex                  Unsigned32,
    sapIngressFlowspec               TruthValue,
    sapCpmProtEthCfmMonitorFlags     BITS,
    sapTransitIpPolicyId             TmnxBsxTransitIpPolicyIdOrZero,
    sapOperGrp                       TNamedItemOrEmpty,
    sapMonitorOperGrp                TNamedItemOrEmpty,
    sapEgressHsmdaWrrPolicyOvr       TNamedItemOrEmpty,
    sapTransitPrefixPolicyId         TmnxBsxTransPrefPolicyIdOrZero,
    sapCpmProtMonitorIP              TruthValue,
    sapHostsAdminState               ServiceAdminStatus,
    sapHostLockoutPolicy             TNamedItemOrEmpty,
    sapAarpId                        TmnxBsxAarpIdOrZero,
    sapIngressFPQGrp                 TNamedItemOrEmpty,
    sapIngressFPQGrpInstanceId       TQosQGrpInstanceIDorZero,
    sapAarpServRefType               TmnxBsxAarpServiceRefType,
    sapSiteName                      TNamedItemOrEmpty,
    sapIgnoreOperDown                TruthValue,
    sapLagLinkMapProfile             TmnxLinkMapProfileIdOrZero,
    sapIngressIPv6Flowspec           TruthValue,
    sapEgressPortQGrp                TNamedItemOrEmpty,
    sapEgressPortQGrpInstanceId      TQosQGrpInstanceIDorZero,
    sapEtreeRootLeafTag              TruthValue,
    sapEtreeLeafTag                  Integer32,
    sapEtreeLeafAc                   TruthValue,
    sapEgressAggRateLUB              TruthValue,
    sapEgressAggRateLmtHi            TmnxQosRateHigh32,
    sapEgressAggRateLmt              TmnxQosRateLow32,
    sapMulticastSource               TruthValue
}

sapPortId                        OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ID of the access port where this SAP is defined."
    ::= { sapBaseInfoEntry 1 }

sapEncapValue                    OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the label used to identify this SAP on the access port
         specified by sapPortId."
    ::= { sapBaseInfoEntry 2 }

sapRowStatus                     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the status of this row. The only values
         supported during a set operation are 'createAndGo' and 'destroy'."
    ::= { sapBaseInfoEntry 3 }

sapType                          OBJECT-TYPE
    SYNTAX      ServType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the type of service where this SAP is defined."
    ::= { sapBaseInfoEntry 4 }

sapDescription                   OBJECT-TYPE
    SYNTAX      TItemLongDescription (SIZE (0..160))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Generic information about this SAP."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 5 }

sapAdminStatus                   OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The desired state of this SAP."
    DEFVAL      { up }
    ::= { sapBaseInfoEntry 6 }

sapOperStatus                    OBJECT-TYPE
    SYNTAX      INTEGER {
        up                 (1),
        down               (2),
        ingressQosMismatch (3),
        egressQosMismatch  (4),
        portMtuTooSmall    (5),
        svcAdminDown       (6),
        iesIfAdminDown     (7)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapOperStatus indicates the operating state of
         this SAP."
    ::= { sapBaseInfoEntry 7 }

sapIngressQosPolicyId            OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapIngressQosPolicyId specifies the row index
         in the tSapIngressTable corresponding to this ingress QoS policy, or
         one if no policy is specified. The value 0 is needed for mirror SAPs
         that cannot have a QoS policy assigned."
    DEFVAL      { 1 }
    ::= { sapBaseInfoEntry 8 }

sapIngressMacFilterId            OBJECT-TYPE
    SYNTAX      TConfigOrVsdFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapIngressMacFilterId specifies the row index
         in the tMacFilterTable corresponding to this ingress filter, or zero
         if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 9 }

sapIngressIpFilterId             OBJECT-TYPE
    SYNTAX      TConfigOrVsdFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapIngressIpFilterId specifies the row index
         in the tIPFilterTable corresponding to this ingress filter, or zero if
         no filter is specified."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 10 }

sapEgressQosPolicyId             OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The row index in the tSapEgressTable corresponding to this egress QoS
         policy, or one if no policy is specified."
    DEFVAL      { 1 }
    ::= { sapBaseInfoEntry 11 }

sapEgressMacFilterId             OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The row index in the tMacFilterTable corresponding to this egress
         filter, or zero if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 12 }

sapEgressIpFilterId              OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The row index in the tIPFilterTable corresponding to this egress
         filter, or zero if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 13 }

sapMirrorStatus                  OBJECT-TYPE
    SYNTAX      INTEGER {
        ingress          (1),
        egress           (2),
        ingressAndEgress (3),
        disabled         (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether traffic mirroring has been enabled on
         this SAP."
    ::= { sapBaseInfoEntry 14 }

sapIesIfIndex                    OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of sapType is 'ies' this object specifies the index of
         the IES interface where this SAP is defined. The value of this object
         can be set only when the row is created and cannot be changed while
         the row status is 'active'. This object is otherwise not significant
         and should have the value zero."
    ::= { sapBaseInfoEntry 15 }

sapLastMgmtChange                OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime at the time of the most recent
         management-initiated change to this SAP."
    ::= { sapBaseInfoEntry 16 }

sapCollectAcctStats              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of this object is 'true' the agent collects accounting
         statistics on this SAP."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 17 }

sapAccountingPolicyId            OBJECT-TYPE
    SYNTAX      Unsigned32 (0..99)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the policy to use to collect accounting
         statistics on this SAP. The value zero indicates that the agent should
         use the default accounting policy, if one exists."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 18 }

sapVpnId                         OBJECT-TYPE
    SYNTAX      VpnId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The VPN ID of the associated service."
    ::= { sapBaseInfoEntry 19 }

sapCustId                        OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID of the associated service."
    ::= { sapBaseInfoEntry 20 }

sapCustMultSvcSite               OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of this object, when not null, specifies the Multi-Service
         Site this SAP is a member of. This information is used to configure
         the ingress and egress QoS schedulers for this SAP."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 21 }

sapIngressQosSchedulerPolicy     OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object can be set only when sapCustMultSvcSite is null. It
         specifies the ingress QoS scheduler for this SAP."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 22 }

sapEgressQosSchedulerPolicy      OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object can be set only when sapCustMultSvcSite is null. It
         specifies the egress QoS scheduler for this SAP."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 23 }

sapSplitHorizonGrp               OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the name of the split-horizon group where the
         SAP belongs to. This object can be set only at the time the row is
         created and is mutually exclusive with sapMulticastSource. Per default
         a SAP does not belong to any split-horizon group. The name specified
         must correspond to an existing split- horizon group in the TLS service
         where this SAP is defined."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 24 }

sapIngressSharedQueuePolicy      OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the ingress shared queue policy used by this
         SAP. When the value of this object is null it means that the SAP will
         use individual ingress QoS queues, instead of the shared ones."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 25 }

sapIngressMatchQinQDot1PBits     OBJECT-TYPE
    SYNTAX      INTEGER {
        default (1),
        top     (2),
        bottom  (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object applies only to SAPs defined on a port configured for qinq
         service encapsulation. It specifies which 802.1P bits will be used to
         match a QoS or a MAC filter policy when a double-tagged frame is
         received on this SAP."
    DEFVAL      { default }
    ::= { sapBaseInfoEntry 26 }

sapOperFlags                     OBJECT-TYPE
    SYNTAX      BITS {
        sapAdminDown              (0),
        svcAdminDown              (1),
        iesIfAdminDown            (2),
        portOperDown              (3),
        portMtuTooSmall           (4),
        l2OperDown                (5),
        ingressQosMismatch        (6),
        egressQosMismatch         (7),
        relearnLimitExceeded      (8),
        recProtSrcMac             (9),
        subIfAdminDown            (10),
        sapIpipeNoCeIpAddr        (11),
        reserved12                (12),
        reserved13                (13),
        sapParamMismatch          (14),
        sapCemNoEcidOrMacAddr     (15),
        sapStandbyForMcRing       (16),
        sapSvcMtuTooSmall         (17),
        ingressNamedPoolMismatch  (18),
        egressNamedPoolMismatch   (19),
        ipMirrorNoMacAddr         (20),
        sapEpipeNoRingNode        (21),
        mcStandby                 (22),
        mhStandby                 (23),
        oamDownMepFault           (24),
        oamUpMepFault             (25),
        ethTunTagMisconfig        (26),
        ingressPolicerMismatch    (27),
        egressPolicerMismatch     (28),
        sapTlsNoRingNode          (29),
        ethRingPathBlocked        (30),
        oamTunnelMepFault         (31),
        operGrpDown               (32),
        portBouncing              (33),
        sapEgressHQosMgmtMismatch (34),
        evpnP2mpConflict          (35),
        l2tpv3TunnelDown          (36),
        labelStackLimitExceeded   (37),
        sapIngQGrpRedirMismatch   (38),
        sapEgrQGrpRedirMismatch   (39)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object indicates all the conditions that affect the operating
         status of this SAP.

         The bit values are:

         sapAdminDown                 (0)  - SAP is admin down.
         svcAdminDown                 (1)  - Service is admin down.
         iesIfAdminDown               (2)  - IP interface is admin down (IES and
                                             VPRN only).
         portOperDown                 (3)  - Access port is oper down.
         portMtuTooSmall              (4)  - Access port's MTU is < Service MTU
         l2OperDown                   (5)  - L2 PVC/PVP is oper down (FR and ATM
                                             only).
         ingressQosMismatch           (6)  - Mismatch between ingress QoS and
                                             Scheduler policies.
         egressQosMismatch            (7)  - Mismatch between egress QoS and
                                             Scheduler policies.
         relearnLimitExceeded         (8)  - MAC relearn limit was exceeded (TLS
                                             only).
         recProtSrcMac                (9)  - Received a packet with a protected
                                             source MAC (TLS only).
         subIfAdminDown               (10) - Subscriber interface is admin down
                                             (group-interface SAP only).
         sapIpipeNoCeIpAddr           (11) - CE IP Address not configured for Ipipe
                                             SAP (IPIPE SAP only).
         reserved12                   (12)
         reserved13                   (13)
         sapParamMismatch             (14) - Service specific local parameter
                                             mismatch.
         sapCemNoEcidOrMacAddr        (15) - ECID or MAC address not configured
                                             (CEM SAP only).
         sapStandbyForMcRing          (16) - mc-ring keeps this SAP standby for the
                                             corresponding SAP on peer.
         sapSvcMtuTooSmall            (17) - Service MTU is < SAP payload.
         ingressNamedPoolMismatch     (18)
                                           - Invalid named pool on the ingress
                                             side.
         egressNamedPoolMismatch      (19)
                                           - Invalid named pool on the egress side.
         ipMirrorNoMacAddr            (20) - No MAC Address configured for the
                                             IP mirror.
         sapEpipeNoRingNode           (21) - No TIMETRA-MC-REDUNDANCY-MIB
                                             ::tmnxMcEpipeSapEntry object
                                             configured for Epipe SAP (EPIPE SAP
                                             only).
         mcStandby                    (22) - indicates the SAP is standby because
                                             of a multi-chassis protocol.
         mhStandby                    (23) - indicates the SAP is standby because
                                             of a BGP multi-home protocol.
         oamDownMepFault              (24) - ETH-CFM down MEP fault detected.
         oamUpMepFault                (25) - ETH-CFM up MEP fault detected.
         ethTunTagMisconfig           (26) - Missing Eth-tunnel SAP tag(s).
         ingressPolicerMismatch       (27) - indicate ingress policer
                                             is parented to non-existent arbiter
         egressPolicerMismatch        (28) - indicate egress policer
                                             is parented to non-existent arbiter.
         sapTlsNoRingNode             (29) - No TIMETRA-MC-REDUNDANCY-MIB
                                             ::tmnxMcTlsSapEntry object
                                             configured for TLS SAP (VPLS SAP
                                             only).
         ethRingPathBlocked           (30) - indicates eth-ring path is
                                             blocked.
         oamTunnelMepFault            (31) - ETH-CFM Tunnel MEP fault detected.
         operGrpDown                  (32) - indicates operational-group is down.
         portBouncing                 (33) - indicates port is oper down and
                                             bouncing.
         sapEgressHQosMgmtMismatch    (34)
                                           - indicates the policer is in orphaned
                                             operational state as scheduler policy
                                             does not exist.
         evpnP2mpConflict             (35) - Conflict with evpn p2mp.
         l2tpv3TunnelDown             (36) - indicates l2tpv3 tunnel status.
         labelStackLimitExceeded      (37) - label stack overhead exceeding the
                                             egress IOM limitation.
         sapIngQGrpRedirMismatch      (38) - indicates an instance in the SAP's ingress
                                             QGrp redirect list is not present on the FP.
         sapEgrQGrpRedirMismatch      (39) - indicates an instance in the SAP's egress
                                             QGrp redirect list is not present on the port.
         This object is replaced by tmnxSapOperFlags."
    ::= { sapBaseInfoEntry 27 }

sapLastStatusChange              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime at the time of the most recent operating status
         change to this SAP."
    ::= { sapBaseInfoEntry 28 }

sapAntiSpoofing                  OBJECT-TYPE
    SYNTAX      INTEGER {
        disabled            (0),
        sourceIpAddr        (1),
        sourceMacAddr       (2),
        sourceIpAndMacAddr  (3),
        nextHopIpAndMacAddr (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapAntiSpoofing specifies the type of
         anti-spoof filtering applicable on this SAP."
    DEFVAL      { disabled }
    ::= { sapBaseInfoEntry 29 }

sapIngressIpv6FilterId           OBJECT-TYPE
    SYNTAX      TConfigOrVsdFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapIngressIpv6FilterId specifies the row index
         in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or
         zero if no ipv6 filter is specified."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 30 }

sapEgressIpv6FilterId            OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEgressIpv6FilterId specifies the row index
         in the tIPv6FilterTable corresponding to this egress ipv6 filter, or
         zero if no ipv6 filter is specified."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 31 }

sapTodSuite                      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTodSuite specifies the Time of Day (ToD)
         suite to be applied on this SAP. An empty string indicates that no ToD
         suite is applied on this SAP. A set request will only be allowed, if
         the indicated suite is defined in
         TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable.

         This object is obsoleted in 14.0 release."
    DEFVAL      { ''H }
    ::= { sapBaseInfoEntry 32 }

sapIngUseMultipointShared        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of sapIngressSharedQueuePolicy is not null, the value
         of the object sapIngUseMultipointShared specifies whether this SAP
         uses the multipoint-shared queues of the shared policy."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 33 }

sapEgressQinQMarkTopOnly         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the encapsulation type of the access port where this SAP is
         defined is qinq, the value of the object sapEgressQinQMarkTopOnly
         specifies which P-bits to mark during packet egress. When the value is
         false both set of P-bits are marked. When the value is true, only the
         P-bits in the top Q-tag are marked."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 34 }

sapEgressAggRateLimit            OBJECT-TYPE
    SYNTAX      TPortSchedulerAggRateLimitPIR
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgressAggRateLimit specifies the maximum
         total rate of all egress queues for this SAP. The value '-1' means
         that there is no limit.

         This object is obsoleted in 13.0 release and replaced by
         sapEgressAggRateLmt."
    DEFVAL      { -1 }
    ::= { sapBaseInfoEntry 35 }

sapEndPoint                      OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEndPoint specifies the service endpoint to
         which this SAP is attached. The svcId of the SAP MUST match the svcId
         of the service endpoint."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 36 }

sapIngressVlanTranslation        OBJECT-TYPE
    SYNTAX      INTEGER {
        none      (1),
        vlanId    (2),
        copyOuter (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressVlanTranslation specifies the desired Ingress
         Vlan Translation.

         A value of 'vlanId' specifies that the value of
         sapIngressVlanTranslationId is to be used to overwrite the preserved
         VLAN id in the packet.

         A value of 'copyOuter' specifies that the outer VLAN id should be used
         to overwrite the preserved VLAN id in the packet.

         An 'inconsistentValue' error is returned when an attempt is made to
         set the value of sapIngressVlanTranslation to 'vlanId' and
         sapIngressVlanTranslationId is set to '-1'."
    DEFVAL      { none }
    ::= { sapBaseInfoEntry 37 }

sapIngressVlanTranslationId      OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressVlanTranslationId specifies the VLAN id to be
         used to overwrite the preserved VLAN id in the packet.

         An 'inconsistentValue' error is returned when an attempt is made to
         set the value of sapIngressVlanTranslationId to other than '-1' and
         sapIngressVlanTranslation is not set to 'vlanId'."
    DEFVAL      { -1 }
    ::= { sapBaseInfoEntry 38 }

sapSubType                       OBJECT-TYPE
    SYNTAX      INTEGER {
        regular  (0),
        capture  (1),
        managed  (2),
        video    (3),
        internal (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapSubType specifies the sub type for this
         SAP.

         A value of 'regular' indicates a standard SAP.

         A value of 'capture' specifies a capturing SAP in which triggering
         packets will be sent to the CPM. Non-triggering packets captured by
         the 'capture' SAP will be dropped.

         A value of 'managed' indicates a managed SAP which was created
         dynamically after receiving triggering packets on a SAP with a
         sapSubType value of 'capture'. Entries with a value of 'managed' are
         not user editable and are not maintained in the configuration file.

         A value of 'video' indicates a video SAP which terminates on a video
         SAP. Entries with a value of 'video' are not user editable and are not
         maintained in the configuration file.

         A value of 'internal' indicates an internal SAP which was created by
         the system. Entries with a value of 'internal' are not user editable
         and are not maintained in the configuration file.

         Whereas any of the five values may be returned in in response to an
         SNMP GET request, only two values may be specified in an SNMP SET
         request: 'regular' and 'capture'. An attempt to specify a value of
         'managed', 'video' or 'internal' in an SNMP SET request will fail with
         an error of 'inconsistentValue'.

         The value of this object cannot be changed after creation."
    DEFVAL      { regular }
    ::= { sapBaseInfoEntry 39 }

sapCpmProtPolicyId               OBJECT-TYPE
    SYNTAX      TCpmProtPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapCpmProtPolicyId associates a CPM Protection policy
         with a SAP.

         A value of zero (0) specifies that no CPM Protection policy is
         associated with this SAP.

         A value of 254 specifies that the default CPM Protection policy is
         associated with this SAP.

         If no value for sapCpmProtPolicyId is specified when the
         sapBaseInfoEntry is created, the system assigns a default value as
         follows: if the system creates a corresponding entry in the
         sapSubMgmtInfoTable, the default value is 254; otherwise, the default
         value is 'zero'. This means that all SAPs that support Enhanced
         Subscriber Management get a default value of 254.

         If a SAP would get a default value of 254, it is not allowed to set
         the value of sapCpmProtPolicyId to 'zero'.

         If a SAP would get a default value of 'zero', it is not allowed to
         modify the value of sapCpmProtPolicyId.

         This object is not supported on 7710, where the value of
         TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'."
    ::= { sapBaseInfoEntry 40 }

sapCpmProtMonitorMac             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapCpmProtMonitorMac specifies whether or not to apply
         the tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy
         to packets served by the SAP, on a per source MAC address basis.

         For example, suppose sapCpmProtMonitorMac is 'true', and this SAP's
         sapCpmProtPolicyId points to a policy table row with
         tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second.  Suppose two
         source MAC addresses each send 150 packets/second to this SAP.  Approx.
         50 packets/second from each source will be discarded.

         If the value of sapCpmProtPolicyId is equal to zero, the value of
         sapCpmProtMonitorMac is irrelevant and will be ignored.

         At most one of the following options can be enabled on this SAP:
           1.  sapCpmProtMonitorMac,
           2.  The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
           3.  sapCpmProtMonitorIP.

         This object is not supported on 7710, where the value of
         TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 41 }

sapEgressFrameBasedAccounting    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressFrameBasedAccounting specifies whether to use
         frame-based accounting when evaluating sapEgressAggRateLmt for all
         egress queues for this SAP.

         If the value is 'false', the default packet-based accounting method
         will be used."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 42 }

sapIngressAggRateLimit           OBJECT-TYPE
    SYNTAX      TPortSchedulerPIR
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIngressAggRateLimit specifies the maximum
         total rate of all ingress queues for this SAP. The value '-1' means
         that there is no limit.

         This object is obsoleted in 10.0 Release."
    DEFVAL      { -1 }
    ::= { sapBaseInfoEntry 43 }

sapEgressHsmdaShaperOverride     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgressHsmdaShaperOverride
         specifies the name of the secondary shaper for this SAP.
         The value must correspond to an entry in the
         tmnxPortEgrShaperTable.  If the empty string is specified,
         the default secondary shaper will be used."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 44 }

sapIngressHsmdaPacketOffOvr      OBJECT-TYPE
    SYNTAX      TIngHsmdaPerPacketOffsetOvr
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngressHsmdaPacketOffOvr specifies the value, in
         bytes, of the adjustment to make to the size of each packet for HSMDA
         queue accounting on ingress.

         This object is obsoleted in 10.0 Release."
    DEFVAL      { -128 }
    ::= { sapBaseInfoEntry 45 }

sapEgressHsmdaPacketOffOverride  OBJECT-TYPE
    SYNTAX      TEgrHsmdaPerPacketOffsetOvr
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgressHsmdaPacketOffOverride specifies the value, in
         bytes, of the adjustment to make to the size of each packet for HSMDA
         queue accounting on ingress."
    DEFVAL      { -128 }
    ::= { sapBaseInfoEntry 46 }

sapCallingStationId              OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapCallingStationId specifies the calling-station-id to
         be included in all RADIUS authentication and accounting requests if
         configured to be included in the corresponding RADIUS authentication
         or accounting policy.

         If the empty string is specified, no calling-station-id will be
         included."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 47 }

sapIsaAaApplicationProfile       OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIsaAaApplicationProfile specifies the ISA-AA
         application profile for this sap. The specified application profile
         needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 48 }

sapIngPolicerPolicy              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPolicerPolicy specifies the ingress policer control
         policy applicable to this subscriber profile."
    DEFVAL      { ''H }
    ::= { sapBaseInfoEntry 49 }

sapEgrPolicerPolicy              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPolicerPolicy specifies the egress policer control
         policy applicable to this subscriber profile."
    DEFVAL      { ''H }
    ::= { sapBaseInfoEntry 50 }

sapTmplUsed                      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTmplUsed indicates the name of the sap-template used
         to create this sap.

         A value of empty string indicates that this sap was not created using
         a sap-template."
    ::= { sapBaseInfoEntry 51 }

sapEthRingIndex                  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthRingIndex specifies the Ethernet Ring associated
         with this SAP.

         This object, if required, MUST be configured during the row creation
         of the sapBaseInfoTable row, and MUST reference an existing row in
         TIMETRA-ETH-RING-MIB::tmnxEthRingConfigTable.

         The value zero, the default value, specifies there is no Ethernet Ring
         associated with this SAP.

         This object can not be changed once set; the SAP MUST be destroyed and
         recreated to change the sapEthRingIndex object."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 52 }

sapIngressFlowspec               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngressFlowspec specifies whether IPv4 ingress
         Flowspec is enabled for this sap."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 53 }

sapCpmProtEthCfmMonitorFlags     OBJECT-TYPE
    SYNTAX      BITS {
        ethCfmMonitor                    (0),
        ethCfmMonitorAggregate           (1),
        ethCfmMonitorCommittedAccessRate (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapCpmProtEthCfmMonitorFlags specifies whether or not to
         apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration)
         to Ethernet Connectivity Fault Management (Eth-CFM) packets served by
         the SAP.  Two associated options are also specified.

         Five combinations of flag values are supported, as shown in the
         following table.

         Flag                                    Value (0=Disabled, 1=Enabled)
         -------------------------------------   -----------------------------
         'ethCfmMonitor(0)'                      0   0   0   0   1   1   1   1
         'ethCfmMonitorAggregate(1)'             0   0   1   1   0   0   1   1
         'ethCfmMonitorCommittedAccessRate(2)'   0   1   0   1   0   1   0   1
         -------------------------------------   -----------------------------
         Supported Combination?                  Y   N   N   N   Y   Y   Y   Y

         If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled
         on this SAP.

         If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
         this SAP.  Excess packets are discarded.  The configured information
         used to perform the Eth-CFM rate limiting (e.g. the rate limit(s))
         resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SAP's
         sapCpmProtPolicyId.

         At most one of the following options can be enabled on this SAP:
           1.  sapCpmProtMonitorMac,
           2.  The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
           3.  sapCpmProtMonitorIP.

         The flags 'ethCfmMonitorAggregate(1)' and
         'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
         rate limiting.  Therefore, they are only significant if Eth-CFM rate
         limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled).  The
         remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.

         If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
         (i.e. on a source MAC address basis).  For example, if the SAP's rate
         limit for all Eth-CFM packets is 100 packets/sec, and two peers are
         served by the SAP, then 100 Eth-CFM packets/sec from each peer is
         within the limit.

         If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
         aggregated traffic flow.  For example, if the SAP's rate limit for all
         Eth-CFM packets is 100 packets/sec, and two peers are served by this
         SAP, then the combined rate of the two peers cannot exceed 100
         packets/sec.

         'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
         between two features:  Eth-CFM rate limiting, and overall rate limiting
         (as configured using tmnxCpmProtPolOverallRateLimit).

         If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
         packet is subjected to two rate limits, in the following order.
         a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
            described above.  If the packet exceeds the limit, it is discarded.
            Otherwise...
         b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied
            to Eth-CFM packets, and the other rate limited packet types) is
            applied.

         If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
         is subjected to one rate limit:  the applicable
         tmnxCpmProtEthCfmPolRateLimit, as described above.  Eth-CFM packets
         are neither counted nor discarded when performing the
         tmnxCpmProtPolOverallRateLimit rate limiting."
    DEFVAL      { {} }
    ::= { sapBaseInfoEntry 54 }

sapTransitIpPolicyId             OBJECT-TYPE
    SYNTAX      TmnxBsxTransitIpPolicyIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTransitIpPolicyId specifies the transit IP policy to
         be associated with this SAP. The value must either be '0' indicating
         an invalid transit IP policy or the specified transit IP policy needs
         to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable.

         At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can
         be non-zero."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 55 }

sapOperGrp                       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the sapOperGrp specifies the Operational-Group identifier
         associated with this SAP.

         An 'inconsistentValue' error is returned when both sapOperGrp and
         sapMonitorOperGrp are set together and at least one of them to a
         non-default value."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 56 }

sapMonitorOperGrp                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the sapMonitorOperGrp specifies the Operational-Group
         identifier which will affect the state of this SAP.

         An 'inconsistentValue' error is returned when both sapOperGrp and
         sapMonitorOperGrp are set together and at least one of them to a
         non-default value."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 57 }

sapEgressHsmdaWrrPolicyOvr       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the sapEgressHsmdaWrrPolicyOvr specifies the egress hsmda
         weighted round-robin policy override for this SAP. When no policy is
         given, the hsmda weighted round-robin policy specified in the
         sap-egress policy is honored. When a valid policy is given, it is used
         instead of the hsmda weighted round-robin policy given in the
         sap-egress policy."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 58 }

sapTransitPrefixPolicyId         OBJECT-TYPE
    SYNTAX      TmnxBsxTransPrefPolicyIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTransitPrefixPolicyId specifies the transit prefix
         policy to be associated with this SAP. The value must either be '0'
         indicating an invalid transit prefix policy or the specified transit
         prefix policy needs to exist in the
         TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable.

         At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can
         be non-zero."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 59 }

sapCpmProtMonitorIP              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapCpmProtMonitorIP specifies whether or not to apply the
         tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to
         IPv4 DHCP packets served by the SAP, on a per source IP address basis.

         For example, suppose sapCpmProtMonitorIP is 'true', and this SAP's
         sapCpmProtPolicyId points to a policy table row with
         tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second.  Suppose two
         source IP addresses (e.g. 138.120.141.173 and 138.120.141.174)
         each send 150 DHCP packets/second to this SAP.  Approx. 50 DHCP
         packets/second from each source will be discarded.

         If the value of sapCpmProtPolicyId is equal to zero, the value of
         sapCpmProtMonitorIP is irrelevant and will be ignored.

         At most one of the following options can be enabled on this SAP:
           1.  sapCpmProtMonitorMac,
           2.  The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
           3.  sapCpmProtMonitorIP."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 60 }

sapHostsAdminState               OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapHostsAdminState specifies the
         administrative state of all hosts on this SAP. If set to 'down' no
         dynamic subscriber hosts can be created, and any active dynamic host
         on the SAP will be removed."
    DEFVAL      { up }
    ::= { sapBaseInfoEntry 61 }

sapHostLockoutPolicy             OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapHostLockoutPolicy specifies the Host Lockout Policy
         for this SAP."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 62 }

sapAarpId                        OBJECT-TYPE
    SYNTAX      TmnxBsxAarpIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAarpId specifies the AA Redundancy Protocol (AARP)
         instance associated with this SAP. If set to 0, no AARP instance is
         associated with this SAP."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 63 }

sapIngressFPQGrp                 OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressFPQGrp specifies the forwarding-plane queue
         group Policy for this SAP.

         This object must be set along with sapIngressFPQGrpInstanceId object.

         An 'inconsistentValue' error is returned if
         sapIngressFPQGrp is set to a non-default value and an entry
         corresponding to tmnxFPNum to which this SAP belongs does
         not exist in  tmnxFPAccIngQGrpTable."
    DEFVAL      { "" }
    ::= { sapBaseInfoEntry 64 }

sapIngressFPQGrpInstanceId       OBJECT-TYPE
    SYNTAX      TQosQGrpInstanceIDorZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressFPQGrpInstanceId specifies the instance of the
         forwarding-plane ingress Queue Group for this SAP.

         This object must be set along with sapIngressFPQGrp object.

         An 'inconsistentValue' error is returned if
         sapIngressFPQGrp is set to a non-default value and an entry
         corresponding to tmnxFPNum to which this SAP belongs does
         not exist in  tmnxFPAccIngQGrpTable."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 65 }

sapAarpServRefType               OBJECT-TYPE
    SYNTAX      TmnxBsxAarpServiceRefType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAarpServRefType specifies the role of the SAP
         referenced by the AA Redundancy Protocol (AARP) instance identified by
         sapAarpId. If sapAarpId is the invalid AARP instance '0', then the
         service reference type is 'none(0)'."
    DEFVAL      { none }
    ::= { sapBaseInfoEntry 66 }

sapSiteName                      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapSiteName indicates the site-name associated with this
         SAP."
    ::= { sapBaseInfoEntry 67 }

sapIgnoreOperDown                OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIgnoreOperDown specifies whether service will ignore
         when sap is operationally down."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 68 }

sapLagLinkMapProfile             OBJECT-TYPE
    SYNTAX      TmnxLinkMapProfileIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapLagLinkMapProfile specifies the LAG link map profile
         identifier associated with this SAP."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 69 }

sapIngressIPv6Flowspec           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngressIPv6Flowspec specifies whether IPv6 ingress
         Flowspec is enabled for this sap."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 70 }

sapEgressPortQGrp                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressPortQGrp specifies the egress access port
         queue-group policy for this SAP. This object must be set along with
         sapEgressPortQGrpInstanceId object.

         An 'inconsistentValue' error is returned if sapEgressPortQGrp and
         sapEgressPortQGrpInstanceId are set to non-default values and an entry
         in tmnxPortPortID to which this SAP belongs does not exist in
         tPortAccEgrQGrpTable."
    DEFVAL      { ''H }
    ::= { sapBaseInfoEntry 71 }

sapEgressPortQGrpInstanceId      OBJECT-TYPE
    SYNTAX      TQosQGrpInstanceIDorZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressPortQGrpInstanceId specifies the egress access
         port queue-group policy for this SAP. This object must be set along
         with sapEgressPortQGrp object.

         An 'inconsistentValue' error is returned if sapEgressPortQGrp and
         sapEgressPortQGrpInstanceId are set to  non-default values and an
         entry in tmnxPortPortID to which this SAP belongs does not exist
         in tPortAccEgrQGrpTable."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 72 }

sapEtreeRootLeafTag              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEtreeRootLeafTag specifies whether or not this SAP is
         etree tagging in this service, with the first VLAN tag in the SAP
         identifier being the VLAN tag for etree root traffic.

         An 'inconsistentValue' error is returned if the value of this object
         is set to 'true' when TIMETRA-SERV-MIB::svcType for the service is not
         set to 'tls'.

         An 'inconsistentValue' error is returned if the value of this object
         is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the
         service is set to 'false'.

         An 'inconsistentValue' error is returned if the value of
         sapEtreeRootLeafTag and sapEtreeLeafTag are not set together.

         An 'inconsistentValue' error is returned if sapEtreeRootLeafTag and
         sapEtreeLeafTag are set to non-default values and sapEtreeLeafAc is
         also set to a non-default value for the same SAP instance.

         The value of this object can be set only during the creation of the
         SAP instance."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 74 }

sapEtreeLeafTag                  OBJECT-TYPE
    SYNTAX      Integer32 (0 | 1..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEtreeLeafTag specifies the VLAN tag to be used for
         etree leaf traffic in the service.

         An 'inconsistentValue' error is returned if the value of
         sapEtreeRootLeafTag and sapEtreeLeafTag are not set together.

         An 'inconsistentValue' error is returned if sapEtreeRootLeafTag and
         sapEtreeLeafTag are set to non-default values and sapEtreeLeafAc is
         also set to a non-default value for the same SAP instance.

         The value of this object can be set only during the creation of the
         SAP instance."
    DEFVAL      { 0 }
    ::= { sapBaseInfoEntry 75 }

sapEtreeLeafAc                   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEtreeLeafAc specifies whether or not this SAP is an
         etree leaf access circuit of the service.

         An 'inconsistentValue' error is returned if the value of this object
         is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the
         service is set to 'false'.

         An 'inconsistentValue' error is returned if sapEtreeLeafAc is set to a
         non-default value and sapEtreeRootLeafTag and sapEtreeLeafTag are also
         set to non-default values for the same SAP instance.

         The value of this object can be set only during the creation of the
         SAP instance."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 76 }

sapEgressAggRateLUB              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressAggRateLUB specifies whether to limit the unused
         bandwidth and allow a tighter control in allocation of bandwidth by
         HQos.

         When the value of sapEgressAggRateLUB is set to 'true', HQos algorithm
         distributes any unused aggregate bandwidth between queues operating
         below their fair share rates. This allows a simplified aggregate rate
         protection while allocating bandwidth by HQos scheduling algorithm."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 77 }

sapEgressAggRateLmtHi            OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressAggRateLmtHi specifies the upper 32 bits of the
         maximum total rate of all egress queues for this SAP.

         This value should always be set along with sapEgressAggRateLmt,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgressAggRateLmtHi along with the value of
         sapEgressAggRateLmt is set to 4294967295 (0xFFFFFFFF), rate for this
         SAP indicates maximum total rate of all egress queues."
    DEFVAL      { 4294967295 }
    ::= { sapBaseInfoEntry 79 }

sapEgressAggRateLmt              OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressAggRateLmt specifies the maximum total rate of
         all egress queues for this SAP. The value of 4294967295 (0xFFFFFFFF)
         means that there is no limit.

         When the value of sapEgressAggRateLmtHi along with the value of
         sapEgressAggRateLmt is set to 4294967295 (0xFFFFFFFF), rate for this
         SAP indicates maximum total rate of all egress queues."
    DEFVAL      { 4294967295 }
    ::= { sapBaseInfoEntry 80 }

sapMulticastSource               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapMulticastSource specifies whether or not the multicast
         source is enabled on the SAP. This object can only be set at the time
         the row is created and is mutually exclusive with sapSplitHorizonGrp."
    DEFVAL      { false }
    ::= { sapBaseInfoEntry 81 }

sapTlsInfoTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains TLS SAP information."
    ::= { tmnxSapObjs 3 }

sapTlsInfoEntry                  OBJECT-TYPE
    SYNTAX      SapTlsInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "TLS specific information about a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsInfoTable 1 }

SapTlsInfoEntry                  ::= SEQUENCE
{
    sapTlsStpAdminStatus             TmnxEnabledDisabled,
    sapTlsStpPriority                Integer32,
    sapTlsStpPortNum                 Integer32,
    sapTlsStpPathCost                Integer32,
    sapTlsStpRapidStart              TmnxEnabledDisabled,
    sapTlsStpBpduEncap               INTEGER,
    sapTlsStpPortState               TStpPortState,
    sapTlsStpDesignatedBridge        BridgeId,
    sapTlsStpDesignatedPort          Integer32,
    sapTlsStpForwardTransitions      Gauge32,
    sapTlsStpInConfigBpdus           Gauge32,
    sapTlsStpInTcnBpdus              Gauge32,
    sapTlsStpInBadBpdus              Gauge32,
    sapTlsStpOutConfigBpdus          Gauge32,
    sapTlsStpOutTcnBpdus             Gauge32,
    sapTlsStpOperBpduEncap           INTEGER,
    sapTlsVpnId                      VpnId,
    sapTlsCustId                     TmnxCustId,
    sapTlsMacAddressLimit            Integer32,
    sapTlsNumMacAddresses            Integer32,
    sapTlsNumStaticMacAddresses      Integer32,
    sapTlsMacLearning                TmnxEnabledDisabled,
    sapTlsMacAgeing                  TmnxEnabledDisabled,
    sapTlsStpOperEdge                TruthValue,
    sapTlsStpAdminPointToPoint       INTEGER,
    sapTlsStpPortRole                StpPortRole,
    sapTlsStpAutoEdge                TmnxEnabledDisabled,
    sapTlsStpOperProtocol            StpProtocol,
    sapTlsStpInRstBpdus              Gauge32,
    sapTlsStpOutRstBpdus             Gauge32,
    sapTlsLimitMacMove               TlsLimitMacMove,
    sapTlsDhcpSnooping               TmnxEnabledDisabled,
    sapTlsMacPinning                 TmnxEnabledDisabled,
    sapTlsDiscardUnknownSource       TmnxEnabledDisabled,
    sapTlsMvplsPruneState            MvplsPruneState,
    sapTlsMvplsMgmtService           TmnxServId,
    sapTlsMvplsMgmtPortId            TmnxPortID,
    sapTlsMvplsMgmtEncapValue        TmnxEncapVal,
    sapTlsArpReplyAgent              INTEGER,
    sapTlsStpException               StpExceptionCondition,
    sapTlsAuthenticationPolicy       TPolicyStatementNameOrEmpty,
    sapTlsL2ptTermination            TmnxEnabledDisabled,
    sapTlsBpduTranslation            TlsBpduTranslation,
    sapTlsStpRootGuard               TruthValue,
    sapTlsStpInsideRegion            TruthValue,
    sapTlsEgressMcastGroup           TNamedItemOrEmpty,
    sapTlsStpInMstBpdus              Gauge32,
    sapTlsStpOutMstBpdus             Gauge32,
    sapTlsRestProtSrcMac             TruthValue,
    sapTlsRestUnprotDstMac           TruthValue,
    sapTlsStpRxdDesigBridge          BridgeId,
    sapTlsStpRootGuardViolation      TruthValue,
    sapTlsShcvAction                 TmnxSubShcvAction,
    sapTlsShcvSrcIp                  IpAddress,
    sapTlsShcvSrcMac                 MacAddress,
    sapTlsShcvInterval               TmnxSubShcvInterval,
    sapTlsMvplsMgmtMsti              MstiInstanceIdOrZero,
    sapTlsMacMoveNextUpTime          Unsigned32,
    sapTlsMacMoveRateExcdLeft        Unsigned32,
    sapTlsRestProtSrcMacAction       INTEGER,
    sapTlsL2ptForceBoundary          TruthValue,
    sapTlsLimitMacMoveLevel          TlsLimitMacMoveLevel,
    sapTlsBpduTransOper              INTEGER,
    sapTlsDefMsapPolicy              TPolicyStatementNameOrEmpty,
    sapTlsL2ptProtocols              L2ptProtocols,
    sapTlsL2ptForceProtocols         L2ptProtocols,
    sapTlsPppoeMsapTrigger           TruthValue,
    sapTlsDhcpMsapTrigger            TruthValue,
    sapTlsMrpJoinTime                Unsigned32,
    sapTlsMrpLeaveTime               Unsigned32,
    sapTlsMrpLeaveAllTime            Unsigned32,
    sapTlsMrpPeriodicTime            Unsigned32,
    sapTlsMrpPeriodicEnabled         TruthValue,
    sapTlsPppoePolicy                TNamedItemOrEmpty,
    sapTlsArpMsapTrigger             TruthValue,
    sapTlsDefMsapService             TmnxServId,
    sapTlsDefMsapGroupIf             TNamedItemOrEmpty,
    sapTlsMrpPolicy                  TNamedItemOrEmpty,
    sapTlsSiteName                   TNamedItemOrEmpty,
    sapTlsDhcp6MsapTrigger           TruthValue,
    sapTlsShcvRetryTimeout           TmnxSubShcvRetryTimeout,
    sapTlsShcvRetryCount             TmnxSubShcvRetryCount,
    sapTlsDataSapInstStatus          TmnxSapInstStatus,
    sapTlsDataSapInstLastErr         DisplayString,
    sapTlsMvrpAdminStatus            TmnxEnabledDisabled,
    sapTlsMvrpOperStatus             TmnxEnabledDisabled,
    sapTlsInTcBitBpdus               Counter32,
    sapTlsOutTcBitBpdus              Counter32,
    sapTlsPppMsapTrigger             TruthValue,
    sapTlsPppPolicy                  TNamedItemOrEmpty,
    sapTlsTrackSrrpInst              Unsigned32,
    sapTlsPppUserDb                  TNamedItemOrEmpty,
    sapTlsPppoeUserDb                TNamedItemOrEmpty,
    sapTlsDhcpUserDb                 TNamedItemOrEmpty,
    sapTlsAutoLearnMacProtect        TruthValue,
    sapTlsDhcp6UserDb                TNamedItemOrEmpty,
    sapTlsShcvPolicyIpv4             TNamedItemOrEmpty,
    sapTlsDataMsapTrigger            TruthValue,
    sapTlsRestProtSrcMacOper         TruthValue,
    sapTlsRestProtSrcMacOperAct      INTEGER,
    sapTlsLastMgmtChange             TimeStamp
}

sapTlsStpAdminStatus             OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpAdminStatus specifies whether this
         SAP participates in the TLS's Spanning Tree Protocol.

         A SAP with a non-zero sapEthRingIndex does not participate in the
         TLS's Spanning Tree Protocol. The default value for
         sapTlsStpAdminStatus for these SAPs is 'disabled' and may not be set
         to 'enabled'."
    DEFVAL      { enabled }
    ::= { sapTlsInfoEntry 1 }

sapTlsStpPriority                OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpPriority specifies the value of the
         port priority field which is contained in the most significant 4 bits
         of the 16-bit Port ID associated with this SAP. As only the most
         significant 4 bits of the value are used, the actual value of this
         object is limited to multiples of 16: e.g. the agent rounds down the
         value to one of: 0, 16, 32, .. , 224, 240."
    DEFVAL      { 128 }
    ::= { sapTlsInfoEntry 2 }

sapTlsStpPortNum                 OBJECT-TYPE
    SYNTAX      Integer32 (0..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpPortNum specifies the value of the
         port number field which is contained in the least significant 12 bits
         of the 16-bit Port ID associated with this SAP. Values in the range
         2048..4094 are automatically assigned by the agent when the SAP is
         created or when the value of this object is set to zero via
         management. Values in the range 1..2047 can be set via management, to
         allow this object to have a deterministic value across system reboots."
    ::= { sapTlsInfoEntry 3 }

sapTlsStpPathCost                OBJECT-TYPE
    SYNTAX      Integer32 (1..200000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object  sapTlsStpPathCost specifies the
         contribution of this port to the path cost of paths
         towards the spanning tree root which include this port."
    DEFVAL      { 10 }
    ::= { sapTlsInfoEntry 4 }

sapTlsStpRapidStart              OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpRapidStart specifies whether Rapid
         Start is enabled on this SAP. When the value is 'enabled' the Spanning
         Tree Protocol state transitions on this SAP are driven by the value of
         the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing
         a faster transition into the forwarding state. This parameter is also
         referred to as 'adminEdge'. "
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 5 }

sapTlsStpBpduEncap               OBJECT-TYPE
    SYNTAX      INTEGER {
        dynamic (1),
        dot1d   (2),
        pvst    (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpBpduEncap specifies the type of
         encapsulation used on BPDUs sent out and received on this SAP."
    DEFVAL      { dynamic }
    ::= { sapTlsInfoEntry 6 }

sapTlsStpPortState               OBJECT-TYPE
    SYNTAX      TStpPortState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpPortState indicates the port's
         current state as defined by application of the Spanning Tree Protocol.
         This state controls what action a port takes on reception of a frame.
         If the bridge has detected a port that is malfunctioning it will place
         that port into the 'broken' state."
    ::= { sapTlsInfoEntry 7 }

sapTlsStpDesignatedBridge        OBJECT-TYPE
    SYNTAX      BridgeId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpDesignatedBridge
         indicates  the Bridge Identifier of the bridge which this
         port considers to be the Designated Bridge for this port's
         segment."
    ::= { sapTlsInfoEntry 8 }

sapTlsStpDesignatedPort          OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpDesignatedPort indicates the Port
         Identifier of the port on the Designated Bridge for this port's
         segment."
    ::= { sapTlsInfoEntry 9 }

sapTlsStpForwardTransitions      OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpForwardTransitions indicates the
         number of times this port has transitioned from the Learning state to
         the Forwarding state."
    ::= { sapTlsInfoEntry 10 }

sapTlsStpInConfigBpdus           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpInConfigBpdus indicates the number of
         Configuration BPDUs received on this SAP."
    ::= { sapTlsInfoEntry 11 }

sapTlsStpInTcnBpdus              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object  sapTlsStpInTcnBpdus indicates the
         number of Topology Change Notification BPDUs received on
         this SAP."
    ::= { sapTlsInfoEntry 12 }

sapTlsStpInBadBpdus              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the number of bad BPDUs received on this SAP."
    ::= { sapTlsInfoEntry 13 }

sapTlsStpOutConfigBpdus          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpOutConfigBpdus indicates the number
         of Configuration BPDUs sent out this SAP."
    ::= { sapTlsInfoEntry 14 }

sapTlsStpOutTcnBpdus             OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the number of Topology Change Notification BPDUs
         sent out this SAP."
    ::= { sapTlsInfoEntry 15 }

sapTlsStpOperBpduEncap           OBJECT-TYPE
    SYNTAX      INTEGER {
        dynamic (1),
        dot1d   (2),
        pvst    (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpOperBpduEncap indicates
         the operating encapsulation  type used on BPDUs sent out
         and received on this SAP."
    ::= { sapTlsInfoEntry 16 }

sapTlsVpnId                      OBJECT-TYPE
    SYNTAX      VpnId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsVpnId indicates the VPN ID of the
         associated service."
    ::= { sapTlsInfoEntry 17 }

sapTlsCustId                     OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID of the associated service."
    ::= { sapTlsInfoEntry 18 }

sapTlsMacAddressLimit            OBJECT-TYPE
    SYNTAX      Integer32 (0..511999)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMacAddressLimit specifies the maximum
         number of learned and static entries allowed in the FDB of this SAP.
         The value 0 means: no limit for this SAP.

         The maximum value of sapTlsMacAddressLimit depends on the
         platform/chassis mode."
    DEFVAL      { 0 }
    ::= { sapTlsInfoEntry 19 }

sapTlsNumMacAddresses            OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsNumMacAddresses indicates
         the number of MAC addresses  currently present in the FDB
         that belong to this  SAP  (Both  learned and static MAC
         addresses are counted)."
    ::= { sapTlsInfoEntry 20 }

sapTlsNumStaticMacAddresses      OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsNumStaticMacAddresses indicates the
         number of static MAC addresses currently present in the FDB that
         belong to this SAP."
    ::= { sapTlsInfoEntry 21 }

sapTlsMacLearning                OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMacLearning specifies
         whether the MAC learning process  is enabled for this SAP.
         The value is ignored if MAC learning is disabled on
         service level."
    DEFVAL      { enabled }
    ::= { sapTlsInfoEntry 22 }

sapTlsMacAgeing                  OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMacAgeing specifies whether
         the MAC aging process  is enabled for this SAP. the value
         is ignored if MAC aging is disabled on service level."
    DEFVAL      { enabled }
    ::= { sapTlsInfoEntry 23 }

sapTlsStpOperEdge                OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpOperEdge indicates the operational
         value of the Edge Port parameter. The object is initialized to the
         value of sapTlsStpRapidStart and is set FALSE on reception of a BPDU."
    REFERENCE
        "IEEE 802.1t clause 14.8.2, 18.3.4"
    ::= { sapTlsInfoEntry 24 }

sapTlsStpAdminPointToPoint       OBJECT-TYPE
    SYNTAX      INTEGER {
        forceTrue  (0),
        forceFalse (1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpAdminPointToPoint
         specifies the administrative point-to-point  status  of
         the LAN segment attached to this  sap. The value
         'forceTrue' means that this port should  always  be
         treated as if it is connected to a point-to-point link.
         The value of 'forceFalse' means that this port should
         be treated as having a shared media connection."
    REFERENCE
        "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
    DEFVAL      { forceTrue }
    ::= { sapTlsInfoEntry 25 }

sapTlsStpPortRole                OBJECT-TYPE
    SYNTAX      StpPortRole
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapTlsStpPortRole indicates the current role of the sap as defined by
         the Rapid Spanning Tree Protocol."
    ::= { sapTlsInfoEntry 26 }

sapTlsStpAutoEdge                OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "sapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge
         detection as defined by Rapid Spanning Tree Protocol."
    DEFVAL      { enabled }
    ::= { sapTlsInfoEntry 27 }

sapTlsStpOperProtocol            OBJECT-TYPE
    SYNTAX      StpProtocol
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapTlsStpOperProtocol indicates whether stp, rstp or
         mstp is  running  on this SAP. If the protocol is not
         enabled  on  this  SAP,  the  value  notApplicable  is
         returned."
    ::= { sapTlsInfoEntry 28 }

sapTlsStpInRstBpdus              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object  sapTlsStpInRstBpdus indicates
         the number of Rapid Spanning Tree (RST) BPDUs received on
         this SAP."
    ::= { sapTlsInfoEntry 29 }

sapTlsStpOutRstBpdus             OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the  object sapTlsStpOutRstBpdus indicates
         the number of Rapid Spanning Tree (RST) BPDUs sent out on
         this SAP."
    ::= { sapTlsInfoEntry 30 }

sapTlsLimitMacMove               OBJECT-TYPE
    SYNTAX      TlsLimitMacMove
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When sapTlsLimitMacMove value is set  to  'blockable'
         the  agent will monitor the MAC relearn rate on this
         SAP,  and it will  block  it  when the relearn rate
         specified  by  svcTlsMacMoveMaxRate  is exceeded. When
         the  value is  'nonBlockable'  this  SAP will not be
         blocked,  and  another  blockable  SAP will be blocked
         instead."
    DEFVAL      { blockable }
    ::= { sapTlsInfoEntry 31 }

sapTlsDhcpSnooping               OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsDhcpSnooping specifies whether or not
         DHCP packets received on this SAP will be snooped. This object was
         made obsolete in the 3.0 release."
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 32 }

sapTlsMacPinning                 OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMacPinning specifies whether or not MAC
         address pinning is active on this SAP. The value will be set by
         default to disabled. However for a SAP that belongs to a residential
         SHG, the value is set to enabled by the system, and cannot be altered
         by the operator. Setting the value to enable disables relearning of
         MAC addresses on other SAPs or spoke-SDPs within the same VPLS; the
         MAC address will hence remain attached to the SAP for the duration of
         its age-timer. This object has effect only for MAC addresses learned
         via the normal MAC learning process, and not for entries learned via
         DHCP."
    ::= { sapTlsInfoEntry 33 }

sapTlsDiscardUnknownSource       OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "with   the object sapTlsMacAddressLimit a limit can be
         configured  for  the  max number of MAC addresses that
         will  be learned on this  SAP.  When  this limit is
         reached, packets with unknown source MAC address are
         forwarded by default. By setting
         sapTlsDiscardUnknownSource  to enabled, packets with
         unknown source MAC will be dropped in stead."
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 34 }

sapTlsMvplsPruneState            OBJECT-TYPE
    SYNTAX      MvplsPruneState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsPruneState indicates the mVPLS prune state of
         the SAP. The object will be set to notApplicable if the SAP is not
         managed by a mVPLS. If the SAP is managed the state reflects whether
         or not the SAP is pruned by the STP instance running in the mVPLS
         instance."
    ::= { sapTlsInfoEntry 35 }

sapTlsMvplsMgmtService           OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsMgmtService indicates the service Id of the
         service where the STP instance is running that is managing this SAP.
         This object is only valid if sapTlsMvplsPruneState is different from
         notApplicable."
    ::= { sapTlsInfoEntry 36 }

sapTlsMvplsMgmtPortId            OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsMgmtPortId indicates the SAP port Id of the
         SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is
         controlling this SAP. This object is only valid if
         sapTlsMvplsPruneState is different from notApplicable."
    ::= { sapTlsInfoEntry 37 }

sapTlsMvplsMgmtEncapValue        OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsMgmtEncapValue indicates the SAP Encap value
         of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService
         that is controlling this SAP. This object is only valid if
         sapTlsMvplsPruneState is different from notApplicable."
    ::= { sapTlsInfoEntry 38 }

sapTlsArpReplyAgent              OBJECT-TYPE
    SYNTAX      INTEGER {
        disabled               (1),
        enabled                (2),
        enabledWithSubscrIdent (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsArpReplyAgent specifies
         the status of the special ARP response mechanism in the
         system for ARP requests destined to static or dynamic hosts
         associated with this SAP.
         disabled: the ARP reply function is not operational
         enabled: the ARP reply function is enabled without
                  subscriber identification.
         enabledWithSubscrIdent: the ARP reply function is enabled
                                 with subscriber identification."
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 39 }

sapTlsStpException               OBJECT-TYPE
    SYNTAX      StpExceptionCondition
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpException indicates whether an STP
         exception condition is present on this Sap.
         - none : no exception condition found.
         - oneWayCommuniation : The neighbor RSTP peer on this link
                                is not able to detect our presence.
         - downstreamLoopDetected :A loop is detected on this link."
    ::= { sapTlsInfoEntry 40 }

sapTlsAuthenticationPolicy       OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsAuthenticationPolicy specifies
         which subscriber authentication policy  must  be applied when
         a DHCP msg is received on the interface.  The  authentication
         policies  must be defined  in  tmnxSubAuthPlcyTable. The policy
         will only be applied when sapTlsDhcpSnoop is enabled."
    DEFVAL      { ''H }
    ::= { sapTlsInfoEntry 41 }

sapTlsL2ptTermination            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsL2ptTermination specifies whether
         received Layer 2 Protocol Tunnel (L2PT) PDUs  are terminated on this
         port or sap."
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 42 }

sapTlsBpduTranslation            OBJECT-TYPE
    SYNTAX      TlsBpduTranslation
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsBpduTranslation specifies whether
         received L2 Protocol Tunnel PDUs are translated before being sent out
         on this port or sap."
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 43 }

sapTlsStpRootGuard               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpRootGuard specifies whether this port
         is allowed to become STP root port. It corresponds to the parameter
         'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree
         connectivity."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 44 }

sapTlsStpInsideRegion            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpInsideRegion indicates whether the
         network connected to the SAP is in the same MST region. It corresponds
         to the parameter 'infoInternal' in 802.1Q."
    ::= { sapTlsInfoEntry 45 }

sapTlsEgressMcastGroup           OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsEgressMcastGroup specifies the Egress
         Multicast Group this SAP belongs to."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 46 }

sapTlsStpInMstBpdus              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpInMstBpdus indicates the number of
         Multiple Spanning Tree (MST) BPDUs received on this SAP."
    ::= { sapTlsInfoEntry 47 }

sapTlsStpOutMstBpdus             OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpOutMstBpdus indicates the number of
         Multiple Spanning Tree (MST) BPDUs sent out on this SAP."
    ::= { sapTlsInfoEntry 48 }

sapTlsRestProtSrcMac             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsRestProtSrcMac specifies how the agent
         will handle relearn requests for protected MAC addresses. When the
         value of this object is 'true' requests to relearn a protected MAC
         address will be ignored. In addition, if the value of
         sapTlsRestProtSrcMacAction is 'disable', then the SAP where the
         protected source MAC was seen will be brought operationally down."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 49 }

sapTlsRestUnprotDstMac           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsRestUnprotDstMac specifies how the
         system will forward packets destined to an unprotected MAC address.
         When the value of this object is 'true' packets destined to an
         unprotected MAC address will be dropped."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 50 }

sapTlsStpRxdDesigBridge          OBJECT-TYPE
    SYNTAX      BridgeId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpRxdDesigBridge
         indicates  the designated Bridge Identifier in the last
         BPDU which was received on this SAP. It identifies
         which bridge is connected to the SAP."
    ::= { sapTlsInfoEntry 51 }

sapTlsStpRootGuardViolation      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsStpRootGuardViolation indicates whether
         there is a root-guard violation at the present time. This can only
         happen when sapTlsStpRootGuard is set to true."
    ::= { sapTlsInfoEntry 52 }

sapTlsShcvAction                 OBJECT-TYPE
    SYNTAX      TmnxSubShcvAction
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsShcvAction indicates whether any action
         should be triggered when the connectivity check fails."
    DEFVAL      { alarm }
    ::= { sapTlsInfoEntry 53 }

sapTlsShcvSrcIp                  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsShcvSrcIp specifies the source IP
         address used when doing the connectivity check. The value 0.0.0.0
         indicates that no host IP address is specified."
    ::= { sapTlsInfoEntry 54 }

sapTlsShcvSrcMac                 OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsShcvSrcMac specifies the MAC address
         used when doing the connectivity check. The value 0:0:0:0:0:0
         indicates that no host MAC address is specified."
    ::= { sapTlsInfoEntry 55 }

sapTlsShcvInterval               OBJECT-TYPE
    SYNTAX      TmnxSubShcvInterval
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsShcvInterval specifies the interval in
         minutes between connectivity checks. Zero means no connectivity
         checking."
    DEFVAL      { 0 }
    ::= { sapTlsInfoEntry 56 }

sapTlsMvplsMgmtMsti              OBJECT-TYPE
    SYNTAX      MstiInstanceIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMvplsMgmtMsti indicates the MST-instance
         in the mVPLS instance specified in sapTlsMvplsMgmtService that is
         controlling this SAP. A value of 0 indicates the CIST. This object is
         only valid if sapTlsMvplsPruneState is different from notApplicable."
    ::= { sapTlsInfoEntry 57 }

sapTlsMacMoveNextUpTime          OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMacMoveNextUpTime counts down the time
         in seconds until a SAP that has been brought down due to exceeding the
         TLS svcTlsMacMoveMaxRate, tmnxSapOperFlags 'relearnLimitExceeded', is
         automatically brought up again.

         When this value is 0xffff, the SAP will never be automatically brought
         up.

         When sapOperStatus is 'up', this object counts down the time in
         seconds until the value of sapTlsMacMoveRateExcdLeft is reset."
    ::= { sapTlsInfoEntry 58 }

sapTlsMacMoveRateExcdLeft        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMacMoveRateExcdLeft counts down the
         number of times this SAP can exceed the TLS svcTlsMacMoveMaxRate and
         still be automatically brought up."
    ::= { sapTlsInfoEntry 59 }

sapTlsRestProtSrcMacAction       OBJECT-TYPE
    SYNTAX      INTEGER {
        disable      (1),
        alarm-only   (2),
        discardFrame (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsRestProtSrcMacAction indicates the
         action to take whenever a relearn request for a protected MAC is
         received on a restricted SAP. When the value of this object is
         'disable' the SAP will be placed in the operational down state, with
         the operating flag 'recProtSrcMac' set.

         When the value of this object is 'alarm-only', the SAP
         will be left up and only a notification,
         sapReceivedProtSrcMac,  will be generated.

         When the value of this object is 'discardFrame', the SAP will start
         discarding the frame in addition to generating sapReceivedProtSrcMac
         notification."
    DEFVAL      { disable }
    ::= { sapTlsInfoEntry 60 }

sapTlsL2ptForceBoundary          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptForceBoundary specifies if
         sapTlsL2ptTermination is enforced for its managed SAPs. Setting the
         value of the object sapTlsL2ptForceBoundary of a SAP in a Management
         VPLS to `true' forces all its managed SAPs to have
         sapTlsL2ptTermination enabled. This value can only be `true' if the
         SAP belongs to a management VPLS. If this SAP has managed SAPs already
         with sapTlsL2ptTermination disabled, it is not allowed to set
         sapTlsL2ptForceBoundary to `true'."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 61 }

sapTlsLimitMacMoveLevel          OBJECT-TYPE
    SYNTAX      TlsLimitMacMoveLevel
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsLimitMacMoveLevel specifies the
         hierarchy in which SAPs are blocked when a MAC-move limit is exceeded.
         When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind
         or spoke-SDP bind with the lower level is blocked first. (tertiary is
         the lowest)"
    DEFVAL      { tertiary }
    ::= { sapTlsInfoEntry 62 }

sapTlsBpduTransOper              OBJECT-TYPE
    SYNTAX      INTEGER {
        undefined (1),
        disabled  (2),
        pvst      (3),
        stp       (4),
        pvst-rw   (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsBpduTransOper indicates the operational
         bpdu encapsulation used for BPDU translated frames."
    ::= { sapTlsInfoEntry 63 }

sapTlsDefMsapPolicy              OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDefMsapPolicy specifies the default Managed SAP
         policy to use to create Managed SAPs when the response from the Radius
         server does not specify a Managed SAP policy.

         The value of sapTlsDefMsapPolicy is only valid for a SAP with a
         sapSubType value of 'capture'. If the value is set to a non-empty
         string for a SAP with a sapSubType value other than 'capture', an
         'inconsistentValue' error will be returned.

         The Managed SAP policy must be defined in msapPlcyTable, otherwise an
         'inconsistentValue' error will be returned."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 64 }

sapTlsL2ptProtocols              OBJECT-TYPE
    SYNTAX      L2ptProtocols
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsL2ptProtocols specifies which L2
         Protocol Tunnel PDUs are terminated on this port or sap."
    DEFVAL      { {stp} }
    ::= { sapTlsInfoEntry 65 }

sapTlsL2ptForceProtocols         OBJECT-TYPE
    SYNTAX      L2ptProtocols
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsL2ptForceProtocols specifies which L2
         Protocol Tunnel PDUs must be terminated by SAPs managed by this SAP.
         This object is only relevant if the value of the object
         sapTlsL2ptForceBoundary is 'true'. For every SAP managed by this SAP,
         each L2 protocol specified by sapTlsL2ptForceProtocols must be
         terminated, while other L2 protocols may or may not be terminated,
         depending on the value of sapTlsL2ptProtocols of that managed SAP."
    DEFVAL      { {stp} }
    ::= { sapTlsInfoEntry 66 }

sapTlsPppoeMsapTrigger           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsPppoeMsapTrigger specifies whether the receipt of
         PPPoE trigger packets on a VPLS SAP with a sapSubType value of
         'capture' will result in a Radius authentication that will provide a
         service context and the creation of a SAP with a sapSubType value of
         'managed'.

         An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP
         with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 67 }

sapTlsDhcpMsapTrigger            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpMsapTrigger specifies whether the receipt of
         DHCP trigger packets on this VPLS SAP with a sapSubType value of
         'capture' will result in a Radius authentication that will provide a
         service context and the creation of a SAP with a sapSubType value of
         'managed'.

         An attempt to set the value sapTlsDhcpMsapTrigger to 'true' on a SAP
         with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 68 }

sapTlsMrpJoinTime                OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    UNITS       "deciseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpJoinTime specifies a timer value in 10ths of
         seconds which determines the maximum rate at which attribute join
         messages can be sent on the SAP."
    DEFVAL      { 2 }
    ::= { sapTlsInfoEntry 69 }

sapTlsMrpLeaveTime               OBJECT-TYPE
    SYNTAX      Unsigned32 (30..60)
    UNITS       "deciseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpLeaveTime specifies a timer value in 10ths of
         seconds which determines the amount of time a registered attribute is
         held in leave state before the registration is removed."
    DEFVAL      { 30 }
    ::= { sapTlsInfoEntry 70 }

sapTlsMrpLeaveAllTime            OBJECT-TYPE
    SYNTAX      Unsigned32 (60..300)
    UNITS       "deciseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpLeaveAllTime specifies the a timer value in
         10ths of seconds which determines the frequency where all attribute
         declarations on the SAP are all refreshed."
    DEFVAL      { 100 }
    ::= { sapTlsInfoEntry 71 }

sapTlsMrpPeriodicTime            OBJECT-TYPE
    SYNTAX      Unsigned32 (10..100)
    UNITS       "deciseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpPeriodicTime specifies a timer value in 10ths of
         seconds which determines the frequency of retransmission of attribute
         declarations."
    DEFVAL      { 10 }
    ::= { sapTlsInfoEntry 72 }

sapTlsMrpPeriodicEnabled         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpPeriodicEnabled specifies whether retransmission
         of attribute declarations is enabled."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 73 }

sapTlsPppoePolicy                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsPppoePolicy specifies the PPPoE policy (defined in
         TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs
         via PPPoE with PAP/CHAP authentication.

         The value of sapTlsPppoePolicy is only valid for a SAP
         with a sapSubType value of 'capture'. If the value is set
         to a  non-empty string for a SAP with a sapSubType value
         other than 'capture', an 'inconsistentValue' error will
         be returned.

         The value of sapTlsPppoePolicy is used for PPP sessions where the
         value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oE'
         or 'oEoA'.

         In general, the default value is empty; for a SAP with a sapSubType
         value of 'capture', the default value is equal to default."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 74 }

sapTlsArpMsapTrigger             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsArpMsapTrigger specifies whether the receipt of ARP
         trigger packets on this VPLS SAP with a sapSubType value of 'capture'
         will result in a Radius authentication that will provide a service
         context and the creation of a SAP with a sapSubType value of
         'managed'.

         An attempt to set the value sapTlsArpMsapTrigger to 'true' on a SAP
         with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 75 }

sapTlsDefMsapService             OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDefMsapService specifies the service ID of the
         service where Managed SAPs are created when there is no Radius server
         available, or the Radius server does not specify the service ID.

         The value of sapTlsDefMsapService is only relevant for a SAP with a
         sapSubType value of 'capture'.

         While the value of sapTlsDefMsapService is equal to zero, no Managed
         SAPs are created when there is no Radius server-specified service ID
         available.

         For a SAP with a sapSubType value other than 'capture', zero is the
         only value allowed."
    DEFVAL      { 0 }
    ::= { sapTlsInfoEntry 76 }

sapTlsDefMsapGroupIf             OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDefMsapGroupIf specifies the name of the group
         interface where Managed SAPs are created when there is no Radius
         server available, or the Radius server does not specify the group
         interface.

         The value of sapTlsDefMsapGroupIf is only relevant for a SAP with a
         sapSubType value of 'capture'.

         While the value of sapTlsDefMsapGroupIf is the empty string, no
         Managed SAPs are created when there is no Radius server-specified
         group interface available.

         For a SAP with a sapSubType value other than 'capture', zero is the
         only value allowed."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 77 }

sapTlsMrpPolicy                  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpPolicy specifies the mrp policy to control which
         Group BMAC attributes will advertise on the egress SAP-SDP."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 78 }

sapTlsSiteName                   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsSiteName indicates the site-name associated with
         this SAP."
    ::= { sapTlsInfoEntry 79 }

sapTlsDhcp6MsapTrigger           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcp6MsapTrigger specifies whether the receipt of
         DHCPv6 trigger packets on this VPLS SAP with a sapSubType value of
         'capture' will result in a Radius authentication that will provide a
         service context and the creation of a SAP with a sapSubType value of
         'managed'.

         An attempt to set the value sapTlsDhcp6MsapTrigger to 'true' on a SAP
         with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 80 }

sapTlsShcvRetryTimeout           OBJECT-TYPE
    SYNTAX      TmnxSubShcvRetryTimeout
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsShcvRetryTimeout specifies the timeout
         in seconds before a connectivity check retransmission."
    DEFVAL      { 10 }
    ::= { sapTlsInfoEntry 81 }

sapTlsShcvRetryCount             OBJECT-TYPE
    SYNTAX      TmnxSubShcvRetryCount
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsShcvRetryCount specifies the number of
         connectivity check retransmissions.

         Setting the value to n specifies that, for any given host, at most
         (n+1) probes are done each interval, and (n+1) missed replies are
         considered as a connectivity failure."
    DEFVAL      { 2 }
    ::= { sapTlsInfoEntry 82 }

sapTlsDataSapInstStatus          OBJECT-TYPE
    SYNTAX      TmnxSapInstStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDataSapInstStatus indicates the status of the SAP
         which is instantiating other SAPs controlled by this SAP.

         This object is valid for services with TIMETRA-SERV-MIB::svcMgmtVpls
         set to 'true'."
    ::= { sapTlsInfoEntry 83 }

sapTlsDataSapInstLastErr         OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDataSapInstLastErr indicates last error encountered
         while instantiating SAPs controlled by this SAP.

         This object is valid for services with TIMETRA-SERV-MIB::svcMgmtVpls
         set to 'true'."
    ::= { sapTlsInfoEntry 84 }

sapTlsMvrpAdminStatus            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvrpAdminStatus specifies whether MVRP is enabled
         on this SAP.

         The default value of sapTlsMvrpAdminStatus is set to 'enabled' for
         MVRP enabled services."
    DEFVAL      { disabled }
    ::= { sapTlsInfoEntry 85 }

sapTlsMvrpOperStatus             OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvrpOperStatus indicates operational status of MVRP
         on this SAP."
    ::= { sapTlsInfoEntry 86 }

sapTlsInTcBitBpdus               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object  sapTlsInTcBitBpdus indicates the
         number of BPDUs received on this SAP
         with the Topology Change bit set."
    ::= { sapTlsInfoEntry 87 }

sapTlsOutTcBitBpdus              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object  sapTlsOutTcBitBpdus indicates the
         number of BPDUs sent out this SAP
         with the Topology Change bit set."
    ::= { sapTlsInfoEntry 88 }

sapTlsPppMsapTrigger             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsPppMsapTrigger specifies whether the receipt of PPP
         trigger packets on a VPLS SAP with a sapSubType value of 'capture'
         will result in a Radius authentication that will provide a service
         context and the creation of a SAP with a sapSubType value of
         'managed'.

         An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP
         with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 89 }

sapTlsPppPolicy                  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsPppPolicy specifies the policy (defined in
         TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable) to use to create Managed SAPs
         via PPP with PAP/CHAP authentication.

         The value of sapTlsPppPolicy is only valid for a SAP
         with a sapSubType value of 'capture'. If the value is set
         to a  non-empty string for a SAP with a sapSubType value
         other than 'capture', an 'inconsistentValue' error will
         be returned.

         The value of sapTlsPppPolicy is used for PPP sessions where the value
         of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oA', as
         opposed to 'oE' or 'oEoA'.

         In general, the default value is empty; for a SAP with a sapSubType
         value of 'capture', the default value is equal to default."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 90 }

sapTlsTrackSrrpInst              OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsTrackSrrpInst specifies the SRRP instance to track."
    DEFVAL      { 0 }
    ::= { sapTlsInfoEntry 91 }

sapTlsPppUserDb                  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsPppUserDb specifies the local user database to use
         for PPP PAP/CHAP based authentication.

         If no authentication with the local user database is required, the
         value of this object must be set to the empty string.

         The value of sapTlsPppUserDb is only valid for a SAP
         with a sapSubType value of 'capture'. If the value is set
         to a  non-empty string for a SAP with a sapSubType value
         other than 'capture', an 'inconsistentValue' error will
         be returned.

         The value of sapTlsPppUserDb is used for PPP sessions where the value
         of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oA', as
         opposed to 'oE' or 'oEoA'."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 92 }

sapTlsPppoeUserDb                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsPppoeUserDb specifies the local user database to
         use for PPPoE PADI PAP/CHAP based authentication.

         If no authentication with the local user database is required, the
         value of this object must be set to the empty string.

         The value of sapTlsPppoeUserDb is only valid for a SAP
         with a sapSubType value of 'capture'. If the value is set
         to a  non-empty string for a SAP with a sapSubType value
         other than 'capture', an 'inconsistentValue' error will
         be returned.

         The value of sapTlsPppoeUserDb is used for PPP sessions where the
         value of TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to 'oE'
         or 'oEoA', as opposed to 'oA'."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 93 }

sapTlsDhcpUserDb                 OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpUserDb specifies the local user database to use
         for DHCP based authentication.

         If no authentication with the local user database is required, the
         value of this object must be set to the empty string.

         The value of sapTlsDhcpUserDb is only valid for a SAP
         with a sapSubType value of 'capture'. If the value is set
         to a  non-empty string for a SAP with a sapSubType value
         other than 'capture', an 'inconsistentValue' error will
         be returned."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 94 }

sapTlsAutoLearnMacProtect        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsAutoLearnMacProtect specifies whether to enable
         automatic population of the MAC protect list with source MAC addresses
         learned on the associated SAP."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 95 }

sapTlsDhcp6UserDb                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcp6UserDb specifies the local user database to
         use for DHCP6 based authentication.

         If no authentication with the local user database is required, the
         value of this object must be set to the empty string.

         The value of sapTlsDhcp6UserDb is only valid for a SAP
         with a sapSubType value of 'capture'. If the value is set
         to a  non-empty string for a SAP with a sapSubType value
         other than 'capture', an 'inconsistentValue' error will
         be returned."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 96 }

sapTlsShcvPolicyIpv4             OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsShcvPolicyIpv4 specifies the Subscriber Host
         Connectivity Verification (SHCV) policy for IPv4 only.

         A non empty value must correspond to a conceptual row in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubShcvPlcyTable.

         A non empty value is only allowed while the value of
         sapTlsShcvInterval is equal to zero."
    DEFVAL      { "" }
    ::= { sapTlsInfoEntry 98 }

sapTlsDataMsapTrigger            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDataMsapTrigger specifies if the receipt of data
         packets on a VPLS SAP with a sapSubType value of 'capture' will result
         in a Radius authentication that will provide a service context and the
         creation of a SAP with a sapSubType value of 'managed'.

         An attempt to set the value sapTlsDataMsapTrigger to 'true' on a SAP
         with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { sapTlsInfoEntry 99 }

sapTlsRestProtSrcMacOper         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsRestProtSrcMacOper indicates the
         operational state of the Restrict Protected Source MAC feature."
    ::= { sapTlsInfoEntry 100 }

sapTlsRestProtSrcMacOperAct      OBJECT-TYPE
    SYNTAX      INTEGER {
        disable      (1),
        alarm-only   (2),
        discardFrame (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsRestProtSrcMacOperAct indicates the
         operation state of the Restrict Protected Source MAC action."
    ::= { sapTlsInfoEntry 101 }

sapTlsLastMgmtChange             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsLastMgmtChange indicates the sysUpTime at the time
         of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { sapTlsInfoEntry 102 }

sapAtmInfoTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapAtmInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ATM SAP information."
    ::= { tmnxSapObjs 4 }

sapAtmInfoEntry                  OBJECT-TYPE
    SYNTAX      SapAtmInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific ATM SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapAtmInfoTable 1 }

SapAtmInfoEntry                  ::= SEQUENCE
{
    sapAtmEncapsulation              TmnxSapAtmEncapsulation,
    sapAtmIngressTrafficDescIndex    AtmTrafficDescrParamIndex,
    sapAtmEgressTrafficDescIndex     AtmTrafficDescrParamIndex,
    sapAtmOamAlarmCellHandling       ServiceAdminStatus,
    sapAtmOamTerminate               ServiceAdminStatus,
    sapAtmOamPeriodicLoopback        ServiceAdminStatus,
    sapAtmLLFAdminStatus             ServiceAdminStatus,
    sapAtmLLFOperStatus              INTEGER,
    sapAtmSubPppIndex                Unsigned32,
    sapAtmDetectedEncapsulation      TmnxSapAtmEncapsulation,
    sapAtmIngressTrafficDescIndexOvr AtmTrafficDescrParamIndex,
    sapAtmEgressTrafficDescIndexOvr  AtmTrafficDescrParamIndex
}

sapAtmEncapsulation              OBJECT-TYPE
    SYNTAX      TmnxSapAtmEncapsulation
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the data encapsulation used
         over the AAL5 SSCS layer.  The definition references
         RFC 2684 Multiprotocol Encapsulation over ATM AAL5
         and to the ATM Forum LAN Emulation specification.

         The default value depends on the value of the object
         TIMETRA-SERV-MIB::svcType of the parent service, and, in layer-3
         services, on the value of the object iesIfType of the parent
         interface:

         svcType (iesIfType)   | default sapAtmEncapsulation             (name)
         -----------------------------------------------------------------------
         epipe                 | llcSnapBridgedProtocol8023 (aal5snap-bridged)
         tls                   | llcSnapBridgedProtocol8023 (aal5snap-bridged)
         vprn (service)        | llcSnapRoutedProtocol       (aal5snap-routed)
         ies  (service)        | llcSnapRoutedProtocol       (aal5snap-routed)
         vprn (group)          | llcSnapBridgedProtocol8023 (aal5snap-bridged)
         ies  (group)          | llcSnapBridgedProtocol8023 (aal5snap-bridged)
         mirror                | llcSnapRoutedProtocol       (aal5snap-routed)
         apipe                 | not applicable
         fpipe                 | not applicable
         ipipe                 | llcSnapRoutedProtocol       (aal5snap-routed)
         cpipe                 | not applicable
         intTls                | not applicable."
    ::= { sapAtmInfoEntry 1 }

sapAtmIngressTrafficDescIndex    OBJECT-TYPE
    SYNTAX      AtmTrafficDescrParamIndex (1..1000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the index of the ATM traffic descriptor in the
         ATM traffic data encapsulation used in for the ingress direction over
         the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol
         Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation
         specification."
    DEFVAL      { 1 }
    ::= { sapAtmInfoEntry 2 }

sapAtmEgressTrafficDescIndex     OBJECT-TYPE
    SYNTAX      AtmTrafficDescrParamIndex (1..1000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the index of the ATM traffic descriptor in the
         ATM traffic data encapsulation used in for the egress direction over
         the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol
         Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation
         specification."
    DEFVAL      { 1 }
    ::= { sapAtmInfoEntry 3 }

sapAtmOamAlarmCellHandling       OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A value of up specifies that the OAM status of a pvc
         affects  the  sap  operational  status and OAM AIS/RDI
         cell generation upon a sap operational status of down.
         A value of down specifies that the OAM status of a pvc
         will   not   affect  the  operational  status  of  the
         associated   sap   and   no   OAM  AIS/RDI  cells  are
         generated."
    DEFVAL      { up }
    ::= { sapAtmInfoEntry 4 }

sapAtmOamTerminate               OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The sapAtmOamTerminate object specifies whether this SAP will act as
         an OAM termination point. If enabled, OAM cells will be sunk by the
         SAP and can affect the SAP's operational status (if
         sapAtmOamAlarmCellHandling is also enabled). Otherwise the OAM cells
         will be passed into the APIPE service. This object is only
         configurable for ATM SAPs that are part of an APIPE service SDU or VCC
         mode. If the sapPortId belongs to an Multi-Chassis APS port, the
         default value is up."
    DEFVAL      { down }
    ::= { sapAtmInfoEntry 5 }

sapAtmOamPeriodicLoopback        OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The sapAtmOamPeriodicLoopback object specifies whether
         this SAP will run periodic OAM loopbacks or not.  If
         enabled, an ATM OAM loopback cell will be transmitted
         every period as configured in tAtmSysOamLoopbackPeriod.
         If a response is not received and tAtmSysOamRetryDown
         consecutive retries also result in failure, the endpoint
         will transition to the eteAisLoc state.  Once in the
         eteAisLoc state, an ATM OAM loopback cell will be
         transmitted every period as configured in
         tAtmSysOamLoopbackPeriod. If a response is received for
         the periodic loopback and tAtmSysOamRetryUp consecutive
         retries also each receive a response, the endpoint will
         transition back to the up state.  This object is only
         configurable on IES or VPRN service endpoints."
    DEFVAL      { down }
    ::= { sapAtmInfoEntry 6 }

sapAtmLLFAdminStatus             OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "sapAtmLLFAdminStatus specifies whether or not Link- Loss Forwarding is
         enabled ('up'). When this object is set to 'up' the underlying port
         will be forced into the operationally 'down' state if the service is
         operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set,
         and will set the underlying port's tmnxPortReasonDownFlags
         'linklossFwd' bit. Setting this object to 'down' will clear the
         'linklossFwd' reason. sapAtmLLFAdminStatus can only be enabled on saps
         configured for an APIPE service using an port with the
         tmnxPortEncapType set to 'atmEncap' and sapEncapValue set for ATM
         ports."
    DEFVAL      { down }
    ::= { sapAtmInfoEntry 7 }

sapAtmLLFOperStatus              OBJECT-TYPE
    SYNTAX      INTEGER {
        fault (1),
        clear (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapAtmLLFOperStatus indicates whether or not the underlying port is
         forced operationally 'down' due to the service being operationally
         'down' or an sdpBindPwPeerStatusBits bit is set. sapAtmLLFOperStatus
         is set to 'fault' when the sapAtmLLFAdminStatus is set to 'up,' and
         either a fault has occurred on the pseudo-wire, or the service is
         down, otherwise sapAtmLLFOperStatus is set to 'clear.'"
    ::= { sapAtmInfoEntry 8 }

sapAtmSubPppIndex                OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapAtmSubPppIndex indicates the local identifier of the
         subscriber PPP session.

         It is the index of the corresponding conceptual row in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppTable.

         The value zero indicates that there is no subscriber PPP session
         associated with this SAP."
    ::= { sapAtmInfoEntry 10 }

sapAtmDetectedEncapsulation      OBJECT-TYPE
    SYNTAX      TmnxSapAtmEncapsulation
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the AAL5 data encapsulation detected by PPPoA
         (PPP over ATM) or PPPoEoA (PPP over Ethernet over ATM).

         The value is only applicable if sapAtmEncapsulation is set to 'auto'
         and returns 'unknown' as long as no encapsulation is detected.

         If sapAtmEncapsulation is set to a value different than 'auto',
         sapAtmDetectedEncapsulation always returns the same value as
         sapAtmEncapsulation."
    ::= { sapAtmInfoEntry 11 }

sapAtmIngressTrafficDescIndexOvr OBJECT-TYPE
    SYNTAX      AtmTrafficDescrParamIndex (0 | 1..1000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the index of the ATM ingress traffic descriptor
         override.

         This override value is given by an AAA server such as a RADIUS server.

         The value zero indicates that no override is given."
    ::= { sapAtmInfoEntry 12 }

sapAtmEgressTrafficDescIndexOvr  OBJECT-TYPE
    SYNTAX      AtmTrafficDescrParamIndex (0 | 1..1000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the index of the ATM egress traffic descriptor
         override.

         This override value is given by an AAA server such as a RADIUS server.

         The value zero indicates that no override is given."
    ::= { sapAtmInfoEntry 13 }

sapBaseStatsTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapBaseStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains basic SAP statistics. In the descriptions below
         'Pchip' refers to the Nokia SROS series Packet Processing chip, while
         'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip."
    ::= { tmnxSapObjs 6 }

sapBaseStatsEntry                OBJECT-TYPE
    SYNTAX      SapBaseStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Basic statistics about a specific SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapBaseStatsTable 1 }

SapBaseStatsEntry                ::= SEQUENCE
{
    sapBaseStatsIngressPchipDroppedPackets Counter64,
    sapBaseStatsIngressPchipDroppedOctets Counter64,
    sapBaseStatsIngressPchipOfferedHiPrioPackets Counter64,
    sapBaseStatsIngressPchipOfferedHiPrioOctets Counter64,
    sapBaseStatsIngressPchipOfferedLoPrioPackets Counter64,
    sapBaseStatsIngressPchipOfferedLoPrioOctets Counter64,
    sapBaseStatsIngressQchipDroppedHiPrioPackets Counter64,
    sapBaseStatsIngressQchipDroppedHiPrioOctets Counter64,
    sapBaseStatsIngressQchipDroppedLoPrioPackets Counter64,
    sapBaseStatsIngressQchipDroppedLoPrioOctets Counter64,
    sapBaseStatsIngressQchipForwardedInProfPackets Counter64,
    sapBaseStatsIngressQchipForwardedInProfOctets Counter64,
    sapBaseStatsIngressQchipForwardedOutProfPackets Counter64,
    sapBaseStatsIngressQchipForwardedOutProfOctets Counter64,
    sapBaseStatsEgressQchipDroppedInProfPackets Counter64,
    sapBaseStatsEgressQchipDroppedInProfOctets Counter64,
    sapBaseStatsEgressQchipDroppedOutProfPackets Counter64,
    sapBaseStatsEgressQchipDroppedOutProfOctets Counter64,
    sapBaseStatsEgressQchipForwardedInProfPackets Counter64,
    sapBaseStatsEgressQchipForwardedInProfOctets Counter64,
    sapBaseStatsEgressQchipForwardedOutProfPackets Counter64,
    sapBaseStatsEgressQchipForwardedOutProfOctets Counter64,
    sapBaseStatsCustId               TmnxCustId,
    sapBaseStatsIngressPchipOfferedUncoloredPackets Counter64,
    sapBaseStatsIngressPchipOfferedUncoloredOctets Counter64,
    sapBaseStatsAuthenticationPktsDiscarded Counter32,
    sapBaseStatsAuthenticationPktsSuccess Counter32,
    sapBaseStatsLastClearedTime      TimeStamp,
    sapBaseStatsIngressCPMPackets    Counter64,
    sapBaseStatsIngressCPMPacketsHi  Counter32,
    sapBaseStatsIngressCPMPacketsLo  Counter32,
    sapBaseStatsIngressCPMOctets     Counter64,
    sapBaseStatsIngressCPMOctetsHi   Counter32,
    sapBaseStatsIngressCPMOctetsLo   Counter32,
    sapBaseStatsIngPchipRcvdValidPkt Counter64,
    sapBaseStatsIngPchipRcvdValidOct Counter64,
    sapBaseStatsIngAggregateOffPkts  Counter64,
    sapBaseStatsIngAggregateOffOcts  Counter64,
    sapBaseStatsIngAggregateFwdPkts  Counter64,
    sapBaseStatsIngAggregateFwdOcts  Counter64,
    sapBaseStatsEgrAggregateFwdPkts  Counter64,
    sapBaseStatsEgrAggregateFwdOcts  Counter64,
    sapBaseStatsIngAggregateDropPkts Counter64,
    sapBaseStatsIngAggregateDropOcts Counter64,
    sapBaseStatsEgrAggregateDropPkts Counter64,
    sapBaseStatsEgrAggregateDropOcts Counter64
}

sapBaseStatsIngressPchipDroppedPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of packets dropped by the ingress Pchip due to: SAP state,
         ingress MAC, IP or IPv6 filter, same segment discard, bad checksum,
         etc."
    ::= { sapBaseStatsEntry 1 }

sapBaseStatsIngressPchipDroppedOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of octets dropped by the ingress Pchip due to: SAP state,
         ingress MAC, IP or IPv6 filter, same segment discard, bad checksum,
         etc."
    ::= { sapBaseStatsEntry 2 }

sapBaseStatsIngressPchipOfferedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority packets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 3 }

sapBaseStatsIngressPchipOfferedHiPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority octets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 4 }

sapBaseStatsIngressPchipOfferedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority packets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 5 }

sapBaseStatsIngressPchipOfferedLoPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority octets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 6 }

sapBaseStatsIngressQchipDroppedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority packets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapBaseStatsEntry 7 }

sapBaseStatsIngressQchipDroppedHiPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority octets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapBaseStatsEntry 8 }

sapBaseStatsIngressQchipDroppedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority packets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapBaseStatsEntry 9 }

sapBaseStatsIngressQchipDroppedLoPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority octets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapBaseStatsEntry 10 }

sapBaseStatsIngressQchipForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapBaseStatsEntry 11 }

sapBaseStatsIngressQchipForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapBaseStatsEntry 12 }

sapBaseStatsIngressQchipForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapBaseStatsEntry 13 }

sapBaseStatsIngressQchipForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapBaseStatsEntry 14 }

sapBaseStatsEgressQchipDroppedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets discarded by the egress Qchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 15 }

sapBaseStatsEgressQchipDroppedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets discarded by the egress Qchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 16 }

sapBaseStatsEgressQchipDroppedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets discarded by the egress Qchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 17 }

sapBaseStatsEgressQchipDroppedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets discarded by the egress Qchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 18 }

sapBaseStatsEgressQchipForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapBaseStatsEntry 19 }

sapBaseStatsEgressQchipForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapBaseStatsEntry 20 }

sapBaseStatsEgressQchipForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapBaseStatsEntry 21 }

sapBaseStatsEgressQchipForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapBaseStatsEntry 22 }

sapBaseStatsCustId               OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapBaseStatsEntry 23 }

sapBaseStatsIngressPchipOfferedUncoloredPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored packets, as determined by the SAP ingress QoS
         policy, offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 24 }

sapBaseStatsIngressPchipOfferedUncoloredOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored octets, as determined by the SAP ingress QoS
         policy, offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 25 }

sapBaseStatsAuthenticationPktsDiscarded OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of DHCP packets discarded as result of authentication."
    ::= { sapBaseStatsEntry 26 }

sapBaseStatsAuthenticationPktsSuccess OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of DHCP packets successfully authenticated."
    ::= { sapBaseStatsEntry 27 }

sapBaseStatsLastClearedTime      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsLastClearedTime indicates the sysUpTime when
         the counters in this table were last cleared."
    ::= { sapBaseStatsEntry 28 }

sapBaseStatsIngressCPMPackets    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngressCPMPackets indicates ingress traffic
         in terms of packets destined to CPM associated with this SAP."
    ::= { sapBaseStatsEntry 29 }

sapBaseStatsIngressCPMPacketsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngressCPMPacketsHi indicates upper 32 bits
         of sapBaseStatsIngressCPMPackets object."
    ::= { sapBaseStatsEntry 30 }

sapBaseStatsIngressCPMPacketsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngressCPMPacketsLo indicates lower 32 bits
         of sapBaseStatsIngressCPMPackets object."
    ::= { sapBaseStatsEntry 31 }

sapBaseStatsIngressCPMOctets     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngressCPMOctets indicates ingress traffic in
         terms of bytes destined to CPM associated with this SAP."
    ::= { sapBaseStatsEntry 32 }

sapBaseStatsIngressCPMOctetsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngressCPMOctetsHi indicates upper 32 bits of
         sapBaseStatsIngressCPMOctets object."
    ::= { sapBaseStatsEntry 33 }

sapBaseStatsIngressCPMOctetsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngressCPMOctetsLo indicates lower 32 bits of
         sapBaseStatsIngressCPMOctets object."
    ::= { sapBaseStatsEntry 34 }

sapBaseStatsIngPchipRcvdValidPkt OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngPchipRcvdValidPkt indicates number of
         received valid packets, as determined by the SAP ingress QoS policy,
         offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 35 }

sapBaseStatsIngPchipRcvdValidOct OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngPchipRcvdValidOct indicates number of
         received valid octets, as determined by the SAP ingress QoS policy,
         offered by the Pchip to the Qchip."
    ::= { sapBaseStatsEntry 36 }

sapBaseStatsIngAggregateOffPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngAggregateOffPkts indicates the aggregate
         number of hi, lo priority and uncolour packets offered by the ingress
         Pchip to Qchip due to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 37 }

sapBaseStatsIngAggregateOffOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngAggregateOffOcts indicates the aggregate
         number of hi, lo priority and uncolour octets offered by the ingress
         Pchip to Qchip due to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 38 }

sapBaseStatsIngAggregateFwdPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngAggregateFwdPkts indicates the aggregate
         number of in and out-of profile packets (rate above CIR) forwarded by
         the ingress Qchip."
    ::= { sapBaseStatsEntry 39 }

sapBaseStatsIngAggregateFwdOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngAggregateFwdOcts indicates the aggregated
         number of in and out-of profile octets (rate above CIR) forwarded by
         the ingress Qchip."
    ::= { sapBaseStatsEntry 40 }

sapBaseStatsEgrAggregateFwdPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsEgrAggregateFwdPkts indicates the aggregate
         number of in and out-of profile packets (rate above CIR) forwarded by
         the egress Qchip."
    ::= { sapBaseStatsEntry 41 }

sapBaseStatsEgrAggregateFwdOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsEgrAggregateFwdOcts indicates the aggregated
         number of in and out-of profile octets (rate above CIR) forwarded by
         the egress Qchip."
    ::= { sapBaseStatsEntry 42 }

sapBaseStatsIngAggregateDropPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngAggregateDropPkts indicates the aggregate
         number of hi and lo profile packets discarded by the ingress Qchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 43 }

sapBaseStatsIngAggregateDropOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsIngAggregateDropOcts indicates the aggregate
         number of hi and lo profile octets discarded by the ingress Qchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 44 }

sapBaseStatsEgrAggregateDropPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsEgrAggregateDropPkts indicates the aggregate
         number of in and out-of profile packets discarded by the egress Qchip
         due to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 45 }

sapBaseStatsEgrAggregateDropOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseStatsEgrAggregateDropOcts indicates the aggregate
         number of in and out-of profile octets discarded by the egress Qchip
         due to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapBaseStatsEntry 46 }

sapIngQosQueueStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ingress QoS queue SAP statistics."
    ::= { tmnxSapObjs 7 }

sapIngQosQueueStatsEntry         OBJECT-TYPE
    SYNTAX      SapIngQosQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS queue."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosQueueId
    }
    ::= { sapIngQosQueueStatsTable 1 }

SapIngQosQueueStatsEntry         ::= SEQUENCE
{
    sapIngQosQueueId                 TSapIngQueueId,
    sapIngQosQueueStatsOfferedHiPrioPackets Counter64,
    sapIngQosQueueStatsDroppedHiPrioPackets Counter64,
    sapIngQosQueueStatsOfferedLoPrioPackets Counter64,
    sapIngQosQueueStatsDroppedLoPrioPackets Counter64,
    sapIngQosQueueStatsOfferedHiPrioOctets Counter64,
    sapIngQosQueueStatsDroppedHiPrioOctets Counter64,
    sapIngQosQueueStatsOfferedLoPrioOctets Counter64,
    sapIngQosQueueStatsDroppedLoPrioOctets Counter64,
    sapIngQosQueueStatsForwardedInProfPackets Counter64,
    sapIngQosQueueStatsForwardedOutProfPackets Counter64,
    sapIngQosQueueStatsForwardedInProfOctets Counter64,
    sapIngQosQueueStatsForwardedOutProfOctets Counter64,
    sapIngQosCustId                  TmnxCustId,
    sapIngQosQueueStatsUncoloredPacketsOffered Counter64,
    sapIngQosQueueStatsUncoloredOctetsOffered Counter64
}

sapIngQosQueueId                 OBJECT-TYPE
    SYNTAX      TSapIngQueueId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The index of the ingress QoS queue of this SAP."
    ::= { sapIngQosQueueStatsEntry 1 }

sapIngQosQueueStatsOfferedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority packets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosQueueStatsEntry 2 }

sapIngQosQueueStatsDroppedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority packets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosQueueStatsEntry 3 }

sapIngQosQueueStatsOfferedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority packets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosQueueStatsEntry 4 }

sapIngQosQueueStatsDroppedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority packets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosQueueStatsEntry 5 }

sapIngQosQueueStatsOfferedHiPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority octets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosQueueStatsEntry 6 }

sapIngQosQueueStatsDroppedHiPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority octets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosQueueStatsEntry 7 }

sapIngQosQueueStatsOfferedLoPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority octets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosQueueStatsEntry 8 }

sapIngQosQueueStatsDroppedLoPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority octets, as determined by the SAP ingress
         QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosQueueStatsEntry 9 }

sapIngQosQueueStatsForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngQosQueueStatsEntry 10 }

sapIngQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngQosQueueStatsEntry 11 }

sapIngQosQueueStatsForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngQosQueueStatsEntry 12 }

sapIngQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngQosQueueStatsEntry 13 }

sapIngQosCustId                  OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapIngQosQueueStatsEntry 14 }

sapIngQosQueueStatsUncoloredPacketsOffered OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored packets offered to the ingress Qchip."
    ::= { sapIngQosQueueStatsEntry 15 }

sapIngQosQueueStatsUncoloredOctetsOffered OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored octets offered to the ingress Qchip."
    ::= { sapIngQosQueueStatsEntry 16 }

sapEgrQosQueueStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains egress QoS queue SAP statistics."
    ::= { tmnxSapObjs 8 }

sapEgrQosQueueStatsEntry         OBJECT-TYPE
    SYNTAX      SapEgrQosQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS queue."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosQueueId
    }
    ::= { sapEgrQosQueueStatsTable 1 }

SapEgrQosQueueStatsEntry         ::= SEQUENCE
{
    sapEgrQosQueueId                 TSapEgrQueueId,
    sapEgrQosQueueStatsForwardedInProfPackets Counter64,
    sapEgrQosQueueStatsDroppedInProfPackets Counter64,
    sapEgrQosQueueStatsForwardedOutProfPackets Counter64,
    sapEgrQosQueueStatsDroppedOutProfPackets Counter64,
    sapEgrQosQueueStatsForwardedInProfOctets Counter64,
    sapEgrQosQueueStatsDroppedInProfOctets Counter64,
    sapEgrQosQueueStatsForwardedOutProfOctets Counter64,
    sapEgrQosQueueStatsDroppedOutProfOctets Counter64,
    sapEgrQosCustId                  TmnxCustId,
    sapEgrQosQStatsFwdExdProfPkts    Counter64,
    sapEgrQosQStatsDrpExdProfPkts    Counter64,
    sapEgrQosQStatsFwdExdProfOcts    Counter64,
    sapEgrQosQStatsDrpExdProfOcts    Counter64,
    sapEgrQosQStatsFwdInPlusProfPkts Counter64,
    sapEgrQosQStatsDrpInPlusProfPkts Counter64,
    sapEgrQosQStatsFwdInPlusProfOcts Counter64,
    sapEgrQosQStatsDrpInPlusProfOcts Counter64,
    sapEgrQosQStatsFwdPkts           Counter64,
    sapEgrQosQStatsDrpPkts           Counter64,
    sapEgrQosQStatsFwdOcts           Counter64,
    sapEgrQosQStatsDrpOcts           Counter64
}

sapEgrQosQueueId                 OBJECT-TYPE
    SYNTAX      TSapEgrQueueId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The index of the egress QoS queue of this SAP."
    ::= { sapEgrQosQueueStatsEntry 1 }

sapEgrQosQueueStatsForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosQueueStatsEntry 2 }

sapEgrQosQueueStatsDroppedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets discarded by the egress Qchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosQueueStatsEntry 3 }

sapEgrQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosQueueStatsEntry 4 }

sapEgrQosQueueStatsDroppedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets discarded by the egress Qchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosQueueStatsEntry 5 }

sapEgrQosQueueStatsForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosQueueStatsEntry 6 }

sapEgrQosQueueStatsDroppedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets discarded by the egress Qchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosQueueStatsEntry 7 }

sapEgrQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosQueueStatsEntry 8 }

sapEgrQosQueueStatsDroppedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets discarded by the egress Qchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosQueueStatsEntry 9 }

sapEgrQosCustId                  OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapEgrQosQueueStatsEntry 10 }

sapEgrQosQStatsFwdExdProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of exceed-profile packets forwarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 11 }

sapEgrQosQStatsDrpExdProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of exceed-profile packets discarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 12 }

sapEgrQosQStatsFwdExdProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of exceed-profile octets forwarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 13 }

sapEgrQosQStatsDrpExdProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of exceed-profile octets discarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 14 }

sapEgrQosQStatsFwdInPlusProfPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of inplus-profile packets forwarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 15 }

sapEgrQosQStatsDrpInPlusProfPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of inplus-profile packets discarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 16 }

sapEgrQosQStatsFwdInPlusProfOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of inplus-profile octets forwarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 17 }

sapEgrQosQStatsDrpInPlusProfOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of inplus-profile octets discarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 18 }

sapEgrQosQStatsFwdPkts           OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of packets forwarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 19 }

sapEgrQosQStatsDrpPkts           OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of packets discarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 20 }

sapEgrQosQStatsFwdOcts           OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of octets forwarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 21 }

sapEgrQosQStatsDrpOcts           OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of octets discarded on this egress queue."
    ::= { sapEgrQosQueueStatsEntry 22 }

sapIngQosSchedStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ingress QoS queue SAP statistics."
    ::= { tmnxSapObjs 9 }

sapIngQosSchedStatsEntry         OBJECT-TYPE
    SYNTAX      SapIngQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS queue."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        IMPLIED sapIngQosSchedName
    }
    ::= { sapIngQosSchedStatsTable 1 }

SapIngQosSchedStatsEntry         ::= SEQUENCE
{
    sapIngQosSchedName               TNamedItem,
    sapIngQosSchedStatsForwardedPackets Counter64,
    sapIngQosSchedStatsForwardedOctets Counter64,
    sapIngQosSchedCustId             TmnxCustId
}

sapIngQosSchedName               OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of the ingress QoS scheduler of this SAP."
    ::= { sapIngQosSchedStatsEntry 1 }

sapIngQosSchedStatsForwardedPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of forwarded packets, as determined by the SAP ingress
         scheduler policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosSchedStatsEntry 2 }

sapIngQosSchedStatsForwardedOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of forwarded octets, as determined by the SAP ingress
         scheduler policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosSchedStatsEntry 3 }

sapIngQosSchedCustId             OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapIngQosSchedStatsEntry 4 }

sapEgrQosSchedStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ingress QoS queue SAP statistics."
    ::= { tmnxSapObjs 10 }

sapEgrQosSchedStatsEntry         OBJECT-TYPE
    SYNTAX      SapEgrQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS queue."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        IMPLIED sapEgrQosSchedName
    }
    ::= { sapEgrQosSchedStatsTable 1 }

SapEgrQosSchedStatsEntry         ::= SEQUENCE
{
    sapEgrQosSchedName               TNamedItem,
    sapEgrQosSchedStatsForwardedPackets Counter64,
    sapEgrQosSchedStatsForwardedOctets Counter64,
    sapEgrQosSchedCustId             TmnxCustId
}

sapEgrQosSchedName               OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of the egress QoS scheduler of this SAP."
    ::= { sapEgrQosSchedStatsEntry 1 }

sapEgrQosSchedStatsForwardedPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of forwarded packets by the egress Qchip, as determined by
         the SAP egress scheduler policy."
    ::= { sapEgrQosSchedStatsEntry 2 }

sapEgrQosSchedStatsForwardedOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of forwarded octets by the egress Qchip, as determined by
         the SAP egress scheduler policy."
    ::= { sapEgrQosSchedStatsEntry 3 }

sapEgrQosSchedCustId             OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapEgrQosSchedStatsEntry 4 }

sapTlsManagedVlanListTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsManagedVlanListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used only for SAPs that are part of a management VPLS.
         It indicates for each SAP the ranges of associated VLANs that will be
         affected when the SAP changes state."
    ::= { tmnxSapObjs 11 }

sapTlsManagedVlanListEntry       OBJECT-TYPE
    SYNTAX      SapTlsManagedVlanListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row specifies a range of VLANs associated with a SAP of a MVPLS.
         Ranges may contains overlapping sections only for Mvpls SAPs that
         belong to the same service."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsMvplsMinVlanTag,
        sapTlsMvplsMaxVlanTag
    }
    ::= { sapTlsManagedVlanListTable 1 }

SapTlsManagedVlanListEntry       ::= SEQUENCE
{
    sapTlsMvplsMinVlanTag            Unsigned32,
    sapTlsMvplsMaxVlanTag            Unsigned32,
    sapTlsMvplsRowStatus             RowStatus
}

sapTlsMvplsMinVlanTag            OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4095)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsMinVlanTag specifies the left bound (i.e. min.
         value) of a range of VLANs that are associated with the Mvpls SAP.
         sapTlsMvplsMinVlanTag must be smaller than (or equal to)
         sapTlsMvplsMaxVlanTag. Special values are: 0: this value is reserved
         for the null tag. 4095: this value denotes the default SAP."
    ::= { sapTlsManagedVlanListEntry 1 }

sapTlsMvplsMaxVlanTag            OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4095)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsMaxVlanTag specifies the right bound (i.e.
         max. value) of a range of VLANs that are associated with the Mvpls
         SAP. Special values are: 0: this value is reserved for the null tag.
         4095: this value denotes the default SAP."
    ::= { sapTlsManagedVlanListEntry 2 }

sapTlsMvplsRowStatus             OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvplsRowStatus specifies the status of this row.
         The only values supported during a set operation are 'createAndGo' and
         'destroy'. A row (i.e. a range of VLAN tags) can be destroyed only if
         there are no SAPs defined in regular VPLSes in this range."
    ::= { sapTlsManagedVlanListEntry 3 }

sapAntiSpoofTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapAntiSpoofEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The sapAntiSpoofTable contains information about anti-spoofing filters
         on a SAP."
    ::= { tmnxSapObjs 12 }

sapAntiSpoofEntry                OBJECT-TYPE
    SYNTAX      SapAntiSpoofEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "An entry in the sapAntiSpoofTable."
    INDEX       {
        sapPortId,
        sapEncapValue,
        sapAntiSpoofIpAddress,
        sapAntiSpoofMacAddress
    }
    ::= { sapAntiSpoofTable 1 }

SapAntiSpoofEntry                ::= SEQUENCE
{
    sapAntiSpoofIpAddress            IpAddress,
    sapAntiSpoofMacAddress           MacAddress
}

sapAntiSpoofIpAddress            OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapAntiSpoofIpAddress indicates the IP address for which
         this table entry contains information."
    ::= { sapAntiSpoofEntry 1 }

sapAntiSpoofMacAddress           OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapAntiSpoofMacAddress indicates the MAC address for
         which this table entry contains information."
    ::= { sapAntiSpoofEntry 2 }

sapStaticHostTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapStaticHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapStaticHostTable is used to configure static hosts on a SAP."
    ::= { tmnxSapObjs 13 }

sapStaticHostEntry               OBJECT-TYPE
    SYNTAX      SapStaticHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information on a statically configured host.
         Entries can be created and deleted via SNMP SET operations."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapStaticHostIpAddress,
        sapStaticHostMacAddress
    }
    ::= { sapStaticHostTable 1 }

SapStaticHostEntry               ::= SEQUENCE
{
    sapStaticHostRowStatus           RowStatus,
    sapStaticHostIpAddress           IpAddress,
    sapStaticHostMacAddress          MacAddress,
    sapStaticHostSubscrIdent         TmnxSubIdentStringOrEmpty,
    sapStaticHostSubProfile          ServObjName,
    sapStaticHostSlaProfile          ServObjName,
    sapStaticHostShcvOperState       INTEGER,
    sapStaticHostShcvChecks          Unsigned32,
    sapStaticHostShcvReplies         Unsigned32,
    sapStaticHostShcvReplyTime       TimeStamp,
    sapStaticHostDynMacAddress       MacAddress,
    sapStaticHostRetailerSvcId       TmnxServId,
    sapStaticHostRetailerIf          InterfaceIndexOrZero,
    sapStaticHostFwdingState         TmnxOperState,
    sapStaticHostAncpString          TmnxAncpStringOrZero,
    sapStaticHostSubIdIsSapId        TruthValue,
    sapStaticHostAppProfile          ServObjName,
    sapStaticHostIntermediateDestId  DisplayString,
    sapStaticHostAdminStatus         ServiceAdminStatus,
    sapStaticHostFilterProfile       TNamedItemOrEmpty,
    sapStaticHostAdminRetailSvcId    TmnxServId,
    sapStaticHostRipPolicy           TNamedItemOrEmpty,
    sapStatHostAppProfileScope       TmnxSapAASubScope
}

sapStaticHostRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostRowStatus controls the creation
         and deletion of rows in this table."
    ::= { sapStaticHostEntry 1 }

sapStaticHostIpAddress           OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostIpAddress specifies the IP
         address associated with this static host. The value 0.0.0.0 indicates
         that no host IP address is specified."
    ::= { sapStaticHostEntry 2 }

sapStaticHostMacAddress          OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostMacAddress specifies the MAC
         address associated with this static host. The value 0:0:0:0:0:0
         indicates that no host MAC address is specified."
    ::= { sapStaticHostEntry 3 }

sapStaticHostSubscrIdent         OBJECT-TYPE
    SYNTAX      TmnxSubIdentStringOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostSubscrIdent specifies the
         subscriber identification for this static host."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 4 }

sapStaticHostSubProfile          OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostSubProfile specifies the
         subscriber profile for this static host. The specified subscriber
         profile needs to exists in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 5 }

sapStaticHostSlaProfile          OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostSlaProfile specifies the SLA
         profile for this static host. The specified SLA profile needs to
         exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 6 }

sapStaticHostShcvOperState       OBJECT-TYPE
    SYNTAX      INTEGER {
        disabled  (1),
        undefined (2),
        down      (3),
        up        (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostShcvOperState gives the state of
         the subscriber host connectivity check for this static host."
    ::= { sapStaticHostEntry 7 }

sapStaticHostShcvChecks          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostShcvChecks indicates the number
         of connectivity checks for this static host."
    ::= { sapStaticHostEntry 8 }

sapStaticHostShcvReplies         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostShcvReplies indicates the number
         of host replies for this static host."
    ::= { sapStaticHostEntry 9 }

sapStaticHostShcvReplyTime       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostShcvReplyTime gives the timestamp
         of the last successful connectivity check for this static host."
    ::= { sapStaticHostEntry 10 }

sapStaticHostDynMacAddress       OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostDynMacAddress gives the MAC
         address learned via ARP in case this is an IP-only static host
         (sapStaticHostMacAddress is set to 0:0:0:0:0:0). The value 0:0:0:0:0:0
         indicates that no MAC address is learned yet."
    ::= { sapStaticHostEntry 11 }

sapStaticHostRetailerSvcId       OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostRetailerSvcId indicates the
         service ID of the retailer VPRN service to which this static host
         belongs. When this object is non zero, the static host belongs to a
         retailer VPRN."
    ::= { sapStaticHostEntry 12 }

sapStaticHostRetailerIf          OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostRetailerIf indicates the
         interface index of the retailer VPRN interface to which this static
         host belongs. When this object is non zero, the static host belongs to
         a retailer VPRN."
    ::= { sapStaticHostEntry 13 }

sapStaticHostFwdingState         OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostFwdingState indicates the forwarding state
         of this static host. When the value is 'outOfService', host traffic is
         not forwarded. When it is 'inService', host traffic is forwarded."
    ::= { sapStaticHostEntry 14 }

sapStaticHostAncpString          OBJECT-TYPE
    SYNTAX      TmnxAncpStringOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostAncpString specifies the ancp-string
         associated to this SAP host."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 15 }

sapStaticHostSubIdIsSapId        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostSubIdIsSapId specifies whether
         the SAP-id is taken as subscriber identification for this static host."
    DEFVAL      { false }
    ::= { sapStaticHostEntry 16 }

sapStaticHostAppProfile          OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostAppProfile specifies the application profile
         for this static host. The specified application profile needs to exist
         in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 17 }

sapStaticHostIntermediateDestId  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostIntermediateDestId specifies to which
         intermediate destination (for example a DSLAM) this host belongs."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 18 }

sapStaticHostAdminStatus         OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostAdminStatus specifies the administrative
         status of this host."
    DEFVAL      { down }
    ::= { sapStaticHostEntry 19 }

sapStaticHostFilterProfile       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostFilterProfile specifies the
         filter profile for this static host. The specified filter profile
         needs to exists in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 20 }

sapStaticHostAdminRetailSvcId    OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostAdminRetailSvcId specifies the forwarding
         service ID for an unnumbered static host in a wholesale/retail
         context."
    DEFVAL      { 0 }
    ::= { sapStaticHostEntry 21 }

sapStaticHostRipPolicy           OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStaticHostRipPolicy specifies the
         RIP/RIP-NG policy for this static host."
    DEFVAL      { "" }
    ::= { sapStaticHostEntry 22 }

sapStatHostAppProfileScope       OBJECT-TYPE
    SYNTAX      TmnxSapAASubScope
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHostAppProfileScope specifies the scope of IPv4
         static host application profile.

         The value of sapStatHostAppProfileScope can only be set along with
         sapStaticHostAppProfile object, optionally. The value of
         sapStatHostAppProfileScope cannot be modified once set."
    DEFVAL      { subscriber }
    ::= { sapStaticHostEntry 23 }

sapTlsDhcpInfoTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsDhcpInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapTlsDhcpInfoTable  contains  DHCP information related
         to a TLS  SAP.  This table complements sapTlsInfoTable,
         and contains an entry for each Tls SAP. Rows in this
         table are created and deleted automatically by the system."
    ::= { tmnxSapObjs 14 }

sapTlsDhcpInfoEntry              OBJECT-TYPE
    SYNTAX      SapTlsDhcpInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " DHCP specific information for a TLS SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsDhcpInfoTable 1 }

SapTlsDhcpInfoEntry              ::= SEQUENCE
{
    sapTlsDhcpAdminState             TmnxEnabledDisabled,
    sapTlsDhcpDescription            ServObjDesc,
    sapTlsDhcpSnoop                  TmnxEnabledDisabled,
    sapTlsDhcpLeasePopulate          Unsigned32,
    sapTlsDhcpOperLeasePopulate      Unsigned32,
    sapTlsDhcpInfoAction             INTEGER,
    sapTlsDhcpCircuitId              INTEGER,
    sapTlsDhcpRemoteId               INTEGER,
    sapTlsDhcpRemoteIdString         DisplayString,
    sapTlsDhcpProxyAdminState        TmnxEnabledDisabled,
    sapTlsDhcpProxyServerAddr        IpAddress,
    sapTlsDhcpProxyLeaseTime         Unsigned32,
    sapTlsDhcpProxyLTRadiusOverride  TruthValue,
    sapTlsDhcpVendorIncludeOptions   BITS,
    sapTlsDhcpVendorOptionString     DisplayString,
    sapTlsDhcpRemoteIdHex            OCTET STRING,
    sapTlsDhcpCircuitIdHex           OCTET STRING
}

sapTlsDhcpAdminState             OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpAdminState specifies
         the overall enable/disable state of all DHCP related
         actions  on  this  Sap. The value 'disabled' allows
         the user to configure  individual DHCP commands but
         administratively disable them."
    DEFVAL      { disabled }
    ::= { sapTlsDhcpInfoEntry 1 }

sapTlsDhcpDescription            OBJECT-TYPE
    SYNTAX      ServObjDesc
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpDescription specifies a user
         provided description for DHCP on this Sap. It consists of any
         printable, seven-bit ASCII characters up to 80 characters in length."
    DEFVAL      { ''H }
    ::= { sapTlsDhcpInfoEntry 2 }

sapTlsDhcpSnoop                  OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpSnoop specifies the enable/disable
         state for DHCP snooping on this Sap. Note that in order for snooping
         to be enabled the object sapTlsDhcpAdminState must also have the value
         enabled."
    DEFVAL      { disabled }
    ::= { sapTlsDhcpInfoEntry 3 }

sapTlsDhcpLeasePopulate          OBJECT-TYPE
    SYNTAX      Unsigned32 (0..131071)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpLeasePopulate specifies the maximum
         number of DHCP lease states allowed on this SAP."
    DEFVAL      { 0 }
    ::= { sapTlsDhcpInfoEntry 4 }

sapTlsDhcpOperLeasePopulate      OBJECT-TYPE
    SYNTAX      Unsigned32 (0..131071)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpOperLeasePopulate indicates the
         number of DHCP lease states currently allocated on this SAP."
    ::= { sapTlsDhcpInfoEntry 5 }

sapTlsDhcpInfoAction             OBJECT-TYPE
    SYNTAX      INTEGER {
        replace (1),
        drop    (2),
        keep    (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpInfoAction specifies
         the DHCP option reforwarding policy:
         'replace' - replace existing information with
                     configured information
         'drop'    - discard messages with existing relay
                     information if the option 82 information
                     is also present.
         'keep'    - retain the existing relay information."
    DEFVAL      { keep }
    ::= { sapTlsDhcpInfoEntry 6 }

sapTlsDhcpCircuitId              OBJECT-TYPE
    SYNTAX      INTEGER {
        none           (0),
        asciiTuple     (1),
        vlanAsciiTuple (2),
        circuitIdHex   (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpCircuitId specifies
         whether or not the circuit-id suboption is present, and if
         it is present what information goes in it:
         - 'none'          the circuit-id suboption will not be part
                           of the information option (Option 82).
         - 'asciiTuple'    the ASCII-encoded  concatenated tuple
                           consisting of the
                              - access-node-identifier
                              - service-id
                              - interface name
                           is used.
         - 'vlanAsciiTuple' the format will include VLAN-id and dot1p
                           bits in addition to what is included in
                           ascii-tuple already.  The format is
                           supported on dot1q and qinq encapsulated
                           ports only.  Thus, when the option 82
                           bits are stripped, dot1p bits will be
                           copied to the Ethernet header of an
                           outgoing packet.
         - 'circuitIdHex'   the circuit-id suboption contains the value
                           of the object sapTlsDhcpCircuitIdHex.
                           "
    DEFVAL      { asciiTuple }
    ::= { sapTlsDhcpInfoEntry 7 }

sapTlsDhcpRemoteId               OBJECT-TYPE
    SYNTAX      INTEGER {
        none           (1),
        mac            (2),
        remoteIdString (3),
        remoteIdHex    (4)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpRemoteId specifies
         what information goes into the remote-id suboption in
         the DHCP Relay packet.
         If the value of this object is set to 'none',
         the remote-id suboption will not be part of the
         information option (Option 82).
         If the value of this object is set to 'mac',
         the MAC address of the remote end is encoded in the
         suboption.
         If the value of this object is set to 'remoteIdString',
         sapTlsDhcpRemoteIdString will represent the remote-id.
         If the value of this object is set to  'remoteIdHex',
         the remote-id suboption contains the value of
         the object sapTlsDhcpRemoteIdHex.
         By default, the remote-id value is none."
    DEFVAL      { none }
    ::= { sapTlsDhcpInfoEntry 8 }

sapTlsDhcpRemoteIdString         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpRemoteIdString specifies a remote-id
         string. a non-empty value is only supported while the value of
         sapTlsDhcpRemoteId is equal to 'remoteIdString'."
    DEFVAL      { "" }
    ::= { sapTlsDhcpInfoEntry 9 }

sapTlsDhcpProxyAdminState        OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpProxyAdminState specifies the desired
         administrative state of the proxy server on this interface.

         Note that in order for the proxy server to be enabled, the value of
         sapTlsDhcpAdminState must also be 'enabled'."
    DEFVAL      { disabled }
    ::= { sapTlsDhcpInfoEntry 10 }

sapTlsDhcpProxyServerAddr        OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpProxyServerAddr specifies the IP address which
         will be used as the source address of the emulated DHCP server in the
         context of this VPLS SAP.

         This address is mandatory for the proxy server capability and it
         should be in the context of the subnet represented by this VPLS."
    DEFVAL      { '00000000'H }
    ::= { sapTlsDhcpInfoEntry 11 }

sapTlsDhcpProxyLeaseTime         OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 300..315446399)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpProxyLeaseTime specifies in seconds how long a
         DHCP client is allowed to use the offered IP address.

         Value 0 means the lease time provided by a RADIUS or an upstream DHCP
         server will not be overridden. A lease time of 7 days is used when
         RADIUS does not provide a lease time."
    DEFVAL      { 0 }
    ::= { sapTlsDhcpInfoEntry 12 }

sapTlsDhcpProxyLTRadiusOverride  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpProxyLTRadiusOverride specifies whether or not
         the lease time provided by the RADIUS server is presented to the DHCP
         client.

         By default the proxy server will always make use of
         sapTlsDhcpProxyLeaseTime, regardless of what lease time information is
         provided from the RADIUS server. When sapTlsDhcpProxyLTRadiusOverride
         is set to 'true', the proxy server will use the lease time information
         provided by the RADIUS server, regardless of the configured one."
    DEFVAL      { false }
    ::= { sapTlsDhcpInfoEntry 13 }

sapTlsDhcpVendorIncludeOptions   OBJECT-TYPE
    SYNTAX      BITS {
        systemId  (0),
        clientMac (1),
        serviceId (2),
        sapId     (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpVendorIncludeOptions specifies what is encoded
         in the Nokia vendor specific sub-option of option 82.

         The value of this object is only used when sapTlsDhcpInfoAction is
         'replace'."
    DEFVAL      { {} }
    ::= { sapTlsDhcpInfoEntry 14 }

sapTlsDhcpVendorOptionString     OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDhcpVendorOptionString specifies the string that
         goes into the Nokia vendor specific sub-option of option 82.

         This string is only used when sapTlsDhcpInfoAction is set to
         'replace'."
    DEFVAL      { "" }
    ::= { sapTlsDhcpInfoEntry 15 }

sapTlsDhcpRemoteIdHex            OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpRemoteIdHex specifies a binary
         remote-id; a non-empty value is only supported while the value of
         sapTlsDhcpRemoteId is equal to 'remoteIdHex'."
    DEFVAL      { ''H }
    ::= { sapTlsDhcpInfoEntry 16 }

sapTlsDhcpCircuitIdHex           OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpCircuitIdHex specifies a binary
         circuit-id; a non-empty value is only supported while the value of
         sapTlsDhcpCircuitId is equal to 'circuitIdHex'."
    DEFVAL      { ''H }
    ::= { sapTlsDhcpInfoEntry 17 }

sapTlsDhcpStatsTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsDhcpStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapTlsDhcpStatsTable contains DHCP statistics related
         to  a TLS SAP. This table complements sapTlsInfoTable,
         and  contains  an entry for each Tls SAP. Rows in this
         table  are  created  and  deleted automatically by the
         system."
    ::= { tmnxSapObjs 15 }

sapTlsDhcpStatsEntry             OBJECT-TYPE
    SYNTAX      SapTlsDhcpStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " DHCP statistics for a TLS SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsDhcpStatsTable 1 }

SapTlsDhcpStatsEntry             ::= SEQUENCE
{
    sapTlsDhcpStatsClntSnoopdPckts   Counter32,
    sapTlsDhcpStatsSrvrSnoopdPckts   Counter32,
    sapTlsDhcpStatsClntForwdPckts    Counter32,
    sapTlsDhcpStatsSrvrForwdPckts    Counter32,
    sapTlsDhcpStatsClntDropdPckts    Counter32,
    sapTlsDhcpStatsSrvrDropdPckts    Counter32,
    sapTlsDhcpStatsClntProxRadPckts  Counter32,
    sapTlsDhcpStatsClntProxLSPckts   Counter32,
    sapTlsDhcpStatsGenReleasePckts   Counter32,
    sapTlsDhcpStatsGenForceRenPckts  Counter32,
    sapTlsDhcpStatsClntProxUDBPckts  Counter32,
    sapTlsDhcpStatsClntProxNqPckts   Counter32
}

sapTlsDhcpStatsClntSnoopdPckts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntSnoopdPckts
         indicates the number of  DHCP client packets that have
         been snooped on this SAP."
    ::= { sapTlsDhcpStatsEntry 1 }

sapTlsDhcpStatsSrvrSnoopdPckts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsSrvrSnoopdPckts
         indicates the number of  DHCP server packets that have
         been snooped on this SAP."
    ::= { sapTlsDhcpStatsEntry 2 }

sapTlsDhcpStatsClntForwdPckts    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntForwdPckts
         indicates the number  of  DHCP  client  packets  that
         have been forwarded on this SAP."
    ::= { sapTlsDhcpStatsEntry 3 }

sapTlsDhcpStatsSrvrForwdPckts    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsSrvrForwdPckts
         indicates the number of  DHCP  server  packets  that have
         been forwarded on this SAP."
    ::= { sapTlsDhcpStatsEntry 4 }

sapTlsDhcpStatsClntDropdPckts    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntDropdPckts
         indicates the number of  DHCP client packets that have
         been dropped on this SAP."
    ::= { sapTlsDhcpStatsEntry 5 }

sapTlsDhcpStatsSrvrDropdPckts    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsSrvrDropdPckts
         indicates the number of  DHCP server packets that have
         been dropped on this SAP."
    ::= { sapTlsDhcpStatsEntry 6 }

sapTlsDhcpStatsClntProxRadPckts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntProxRadPckts indicates the
         number of DHCP client packets that have been proxied on this SAP based
         on data received from a RADIUS server."
    ::= { sapTlsDhcpStatsEntry 7 }

sapTlsDhcpStatsClntProxLSPckts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntProxLSPckts indicates the
         number of DHCP client packets that have been proxied on this SAP based
         on a lease state. The lease itself can have been obtained from a DHCP
         or RADIUS server. This is the so called lease split functionality."
    ::= { sapTlsDhcpStatsEntry 8 }

sapTlsDhcpStatsGenReleasePckts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsGenReleasePckts indicates the
         number of DHCP RELEASE messages spoofed on this SAP to the DHCP
         server."
    ::= { sapTlsDhcpStatsEntry 9 }

sapTlsDhcpStatsGenForceRenPckts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsGenForceRenPckts indicates the
         number of DHCP FORCERENEW messages spoofed on this SAP to the DHCP
         clients."
    ::= { sapTlsDhcpStatsEntry 10 }

sapTlsDhcpStatsClntProxUDBPckts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntProxUDBPckts indicates the
         number of DHCP client packets that have been proxied on this SAP based
         on the local user database."
    ::= { sapTlsDhcpStatsEntry 11 }

sapTlsDhcpStatsClntProxNqPckts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcpStatsClntProxNqPckts indicates the
         number of DHCP client packets that have been proxied on this SAP based
         on data received from a Diameter NASREQ server."
    ::= { sapTlsDhcpStatsEntry 12 }

sapTlsDhcpLeaseStateTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsDhcpLeaseStateEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "sapTlsDhcpLeaseStateTable contains DHCP lease state info for a TLS
         SAP. This table complements sapTlsInfoTable, and contains an entry for
         each Tls SAP. Rows in this table are created and deleted automatically
         by the system. The content of this table is moved to the
         svcDhcpLeaseStateTable."
    ::= { tmnxSapObjs 16 }

sapTlsDhcpLeaseStateEntry        OBJECT-TYPE
    SYNTAX      SapTlsDhcpLeaseStateEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "DHCP Lease State information on a TLS SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsDhcpLseStateCiAddr,
        sapTlsDhcpLseStateChAddr
    }
    ::= { sapTlsDhcpLeaseStateTable 1 }

SapTlsDhcpLeaseStateEntry        ::= SEQUENCE
{
    sapTlsDhcpLseStateCiAddr         IpAddress,
    sapTlsDhcpLseStateChAddr         MacAddress,
    sapTlsDhcpLseStateRemainLseTime  Unsigned32,
    sapTlsDhcpLseStateOption82       OCTET STRING,
    sapTlsDhcpLseStatePersistKey     Unsigned32
}

sapTlsDhcpLseStateCiAddr         OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsDhcpLseStateCiAddr indicates the IP
         address of the DHCP lease state."
    ::= { sapTlsDhcpLeaseStateEntry 1 }

sapTlsDhcpLseStateChAddr         OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsDhcpLseStateChAddr indicates the MAC
         address of the DHCP lease state."
    ::= { sapTlsDhcpLeaseStateEntry 2 }

sapTlsDhcpLseStateRemainLseTime  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsDhcpLseStateRemainLseTime indicates the
         remaining lease time of the Ip address of the DHCP lease state. This
         object was made obsolete in the 4.0 release."
    ::= { sapTlsDhcpLeaseStateEntry 3 }

sapTlsDhcpLseStateOption82       OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsDhcpLseStateOption82 indicates the
         content of the Option82 for this DHCP lease state. This object was
         made obsolete in the 4.0 release."
    ::= { sapTlsDhcpLeaseStateEntry 4 }

sapTlsDhcpLseStatePersistKey     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTlsDhcpLseStatePersistKey indicates a key
         value that can be used to track this lease state in the persistence
         file. This object was made obsolete in the 4.0 release."
    ::= { sapTlsDhcpLeaseStateEntry 5 }

sapPortIdIngQosSchedStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPortIdIngQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdIngQosSchedStatsTable contains ingress QoS
         queue SAP statistics. This table is used when the SAP
         is  a CCAG or LAG in 'link' mode, or an APS."
    ::= { tmnxSapObjs 17 }

sapPortIdIngQosSchedStatsEntry   OBJECT-TYPE
    SYNTAX      SapPortIdIngQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the ingress statistics about a specific SAP's
         QoS queue. Entries are created when a scheduler policy is applied to a
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapPortIdIngQosSchedName,
        sapPortIdIngPortId
    }
    ::= { sapPortIdIngQosSchedStatsTable 1 }

SapPortIdIngQosSchedStatsEntry   ::= SEQUENCE
{
    sapPortIdIngQosSchedName         TNamedItem,
    sapPortIdIngPortId               TmnxPortID,
    sapPortIdIngQosSchedFwdPkts      Counter64,
    sapPortIdIngQosSchedFwdOctets    Counter64,
    sapPortIdIngQosSchedCustId       TmnxCustId
}

sapPortIdIngQosSchedName         OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosSchedName is used as an index of the
         ingress QoS scheduler of this SAP."
    ::= { sapPortIdIngQosSchedStatsEntry 1 }

sapPortIdIngPortId               OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngPortId is used as an index of the ingress QoS
         scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode,
         this object is the TmnxPortID of the member-port on which the
         scheduler is applied."
    ::= { sapPortIdIngQosSchedStatsEntry 2 }

sapPortIdIngQosSchedFwdPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosSchedFwdPkts indicates the number of
         forwarded packets, as determined by the SAP ingress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdIngQosSchedStatsEntry 3 }

sapPortIdIngQosSchedFwdOctets    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosSchedFwdOctets indicates the number of
         forwarded octets,as determined by the SAP ingress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdIngQosSchedStatsEntry 4 }

sapPortIdIngQosSchedCustId       OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosSchedCustId indicates the Customer ID for
         the associated service."
    ::= { sapPortIdIngQosSchedStatsEntry 5 }

sapPortIdEgrQosSchedStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPortIdEgrQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdEgrQosSchedStatsTable contains egress QoS
         queue SAP statistics. This table is used when the SAP
         is  a CCAG or LAG in 'link' mode, or an APS."
    ::= { tmnxSapObjs 18 }

sapPortIdEgrQosSchedStatsEntry   OBJECT-TYPE
    SYNTAX      SapPortIdEgrQosSchedStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the egress statistics about a specific SAP's QoS
         queue. Entries are created when a scheduler policy is applied to a
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapPortIdEgrQosSchedName,
        sapPortIdEgrPortId
    }
    ::= { sapPortIdEgrQosSchedStatsTable 1 }

SapPortIdEgrQosSchedStatsEntry   ::= SEQUENCE
{
    sapPortIdEgrQosSchedName         TNamedItem,
    sapPortIdEgrPortId               TmnxPortID,
    sapPortIdEgrQosSchedFwdPkts      Counter64,
    sapPortIdEgrQosSchedFwdOctets    Counter64,
    sapPortIdEgrQosSchedCustId       TmnxCustId
}

sapPortIdEgrQosSchedName         OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosSchedName is used as an index of the
         egress QoS scheduler of this SAP."
    ::= { sapPortIdEgrQosSchedStatsEntry 1 }

sapPortIdEgrPortId               OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrPortId is used as an index of the egress QoS
         scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode,
         this object is the TmnxPortID of the member-port on which the
         scheduler is applied."
    ::= { sapPortIdEgrQosSchedStatsEntry 2 }

sapPortIdEgrQosSchedFwdPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosSchedFwdPkts indicates the number of
         forwarded packets, as determined by the SAP egress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdEgrQosSchedStatsEntry 3 }

sapPortIdEgrQosSchedFwdOctets    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosSchedFwdOctets indicates the number of
         forwarded octets,as determined by the SAP egress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdEgrQosSchedStatsEntry 4 }

sapPortIdEgrQosSchedCustId       OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosSchedCustId indicates the Customer ID for
         the associated service."
    ::= { sapPortIdEgrQosSchedStatsEntry 5 }

sapIngQosQueueInfoTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosQueueInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to override the base parameters of a queue, as
         defined in the associated SAP ingress QoS policy."
    ::= { tmnxSapObjs 19 }

sapIngQosQueueInfoEntry          OBJECT-TYPE
    SYNTAX      SapIngQosQueueInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Override values for the specified SAP ingress QoS queue. These values
         override the corresponding ones specified in the associated SAP
         ingress QoS policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosQId
    }
    ::= { sapIngQosQueueInfoTable 1 }

SapIngQosQueueInfoEntry          ::= SEQUENCE
{
    sapIngQosQId                     TIngressQueueId,
    sapIngQosQRowStatus              RowStatus,
    sapIngQosQLastMgmtChange         TimeStamp,
    sapIngQosQOverrideFlags          TQosQueueAttribute,
    sapIngQosQCBS                    TBurstSize,
    sapIngQosQMBS                    TBurstSize,
    sapIngQosQHiPrioOnly             TBurstPercentOrDefault,
    sapIngQosQCIRAdaptation          TAdaptationRule,
    sapIngQosQPIRAdaptation          TAdaptationRule,
    sapIngQosQAdminPIR               TQosQueuePIRRate,
    sapIngQosQAdminCIR               TQosQueueCIRRate,
    sapIngQosQMBSBytes               TBurstSizeBytes,
    sapIngQosQWeight                 TWeight,
    sapIngQosQCIRWeight              TWeight,
    sapIngQosQAdminPIRPercent        Unsigned32,
    sapIngQosQAdminCIRPercent        Unsigned32,
    sapIngQosQMonitorDepth           TruthValue,
    sapIngQosQDrpTailLowReductnMbs   TBurstPercentOrDefault,
    sapIngQosQAdminPIRHi             TmnxQosRateHigh32,
    sapIngQosQAdminPIRLo             TmnxQosRateLow32,
    sapIngQosQAdminCIRHi             TmnxQosRateHigh32,
    sapIngQosQAdminCIRLo             TmnxQosRateLow32,
    sapIngQosQMonitorQueueDepth      TruthValue,
    sapIngQosQFastPolling            TruthValue
}

sapIngQosQId                     OBJECT-TYPE
    SYNTAX      TIngressQueueId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQId indicates the ID of the queue whose
         parameters are to be overridden."
    ::= { sapIngQosQueueInfoEntry 1 }

sapIngQosQRowStatus              OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQRowStatus controls the creation and deletion of
         rows in this table."
    ::= { sapIngQosQueueInfoEntry 2 }

sapIngQosQLastMgmtChange         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQLastMgmtChange indicates the value of sysUpTime
         at the time of the last management change of any writable object of
         this row."
    ::= { sapIngQosQueueInfoEntry 3 }

sapIngQosQOverrideFlags          OBJECT-TYPE
    SYNTAX      TQosQueueAttribute
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQOverrideFlags specifies the set of attributes
         whose values have been overridden via management on this queue.
         Clearing a given flag will return the corresponding overridden
         attribute to the value defined on the SAP's ingress QoS policy."
    ::= { sapIngQosQueueInfoEntry 4 }

sapIngQosQCBS                    OBJECT-TYPE
    SYNTAX      TBurstSize
    UNITS       "kilobytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQCBS specifies the amount of reserved buffer
         space (in kilobytes) for this queue."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 5 }

sapIngQosQMBS                    OBJECT-TYPE
    SYNTAX      TBurstSize
    UNITS       "kilobytes"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosQMBS specifies the maximum amount of buffer
         space (in kilobytes) allowed for this queue."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 6 }

sapIngQosQHiPrioOnly             OBJECT-TYPE
    SYNTAX      TBurstPercentOrDefault
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosQHiPrioOnly specifies the percentage of buffer
         space for this queue, used exclusively by high priority packets.

         This object is obsoleted in 15.0 release and has been replaced with
         sapIngQosQDrpTailLowReductnMbs object."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 7 }

sapIngQosQCIRAdaptation          OBJECT-TYPE
    SYNTAX      TAdaptationRule
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQCIRAdaptation specifies the criteria to use to
         compute the operational CIR value for this queue, while maintaining a
         minimum offset."
    DEFVAL      { closest }
    ::= { sapIngQosQueueInfoEntry 8 }

sapIngQosQPIRAdaptation          OBJECT-TYPE
    SYNTAX      TAdaptationRule
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQPIRAdaptation specifies the criteria to use to
         compute the operational PIR value for this queue, while maintaining a
         minimum offset."
    DEFVAL      { closest }
    ::= { sapIngQosQueueInfoEntry 9 }

sapIngQosQAdminPIR               OBJECT-TYPE
    SYNTAX      TQosQueuePIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosQAdminPIR specifies the desired PIR value for
         this queue. This object is obsoleted in 15.0 release and has been
         replaced with sapIngQosQAdminPIRHi and sapIngQosQAdminPIRLo objects."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 10 }

sapIngQosQAdminCIR               OBJECT-TYPE
    SYNTAX      TQosQueueCIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosQAdminCIR specifies the desired CIR value for
         this queue. This object is obsoleted in 15.0 release and has been
         replaced with sapIngQosQAdminCIRHi and sapIngQosQAdminCIRLo objects."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 11 }

sapIngQosQMBSBytes               OBJECT-TYPE
    SYNTAX      TBurstSizeBytes
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQMBSBytes specifies the maximum amount of buffer
         space (in bytes) allowed for this queue."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 12 }

sapIngQosQWeight                 OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQWeight specifies the weight that needs to be
         used by the scheduler to which this queue would be feeding."
    DEFVAL      { 1 }
    ::= { sapIngQosQueueInfoEntry 13 }

sapIngQosQCIRWeight              OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQCIRWeight specifies the weight that should be
         assigned to this queue by the parent scheduler among all the entities
         feeding into the parent, when the traffic is conforming to the
         committed rate.

         A value of '0' specifies that the queue will not receive bandwidth for
         the 'within-cir' pass on its parent scheduler."
    DEFVAL      { 1 }
    ::= { sapIngQosQueueInfoEntry 14 }

sapIngQosQAdminPIRPercent        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQAdminPIRPercent specifies the desired PIR value
         for this queue as a percentage."
    DEFVAL      { 10000 }
    ::= { sapIngQosQueueInfoEntry 15 }

sapIngQosQAdminCIRPercent        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQAdminCIRPercent specifies the desired CIR value
         for this queue as a percentage."
    DEFVAL      { 0 }
    ::= { sapIngQosQueueInfoEntry 16 }

sapIngQosQMonitorDepth           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosQMonitorDepth specifies whether to enable queue
         depth monitoring for this specified queue.

         This object is obsoleted in 21.2 Release. It is replaced by
         sapIngQosQMonitorQueueDepth."
    DEFVAL      { false }
    ::= { sapIngQosQueueInfoEntry 17 }

sapIngQosQDrpTailLowReductnMbs   OBJECT-TYPE
    SYNTAX      TBurstPercentOrDefault
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQDrpTailLowReductnMbs specifies the percentage
         at which low drop tail is being reduced from the MBS specified by
         sapIngQosQMBSBytes."
    DEFVAL      { -1 }
    ::= { sapIngQosQueueInfoEntry 18 }

sapIngQosQAdminPIRHi             OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQAdminPIRHi specifies the upper 32 bits of the
         desired PIR value for this queue.

         This value should always be set along with sapIngQosQAdminPIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngQosQAdminPIRHi along with the value of
         sapIngQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapIngQosQueueInfoEntry 19 }

sapIngQosQAdminPIRLo             OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQAdminPIRLo specifies the lower 32 bits of the
         desired PIR value for this queue.

         This value should always be set along with sapIngQosQAdminPIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngQosQAdminPIRHi along with the value of
         sapIngQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapIngQosQueueInfoEntry 20 }

sapIngQosQAdminCIRHi             OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQAdminCIRHi specifies the upper 32 bits of the
         desired CIR value for this queue.

         This value should always be set along with sapIngQosQAdminCIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngQosQAdminCIRHi along with the value of
         sapIngQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 0 }
    ::= { sapIngQosQueueInfoEntry 21 }

sapIngQosQAdminCIRLo             OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQAdminCIRLo specifies the lower 32 bits of the
         desired CIR value for this queue.

         This value should always be set along with sapIngQosQAdminCIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngQosQAdminCIRHi along with the value of
         sapIngQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 0 }
    ::= { sapIngQosQueueInfoEntry 22 }

sapIngQosQMonitorQueueDepth      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQMonitorQueueDepth specifies whether to enable
         queue depth monitoring for this specified queue."
    DEFVAL      { false }
    ::= { sapIngQosQueueInfoEntry 23 }

sapIngQosQFastPolling            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQFastPolling indicates that the depth monitoring
         should use the new Embedded Control Processor fast-polling."
    DEFVAL      { false }
    ::= { sapIngQosQueueInfoEntry 24 }

sapEgrQosQueueInfoTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosQueueInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to override the base parameters of a queue, as
         defined in the associated SAP egress QoS policy."
    ::= { tmnxSapObjs 20 }

sapEgrQosQueueInfoEntry          OBJECT-TYPE
    SYNTAX      SapEgrQosQueueInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Override values for the specified SAP egress QoS queue. These values
         override the corresponding ones specified in the associated SAP egress
         QoS policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosQId
    }
    ::= { sapEgrQosQueueInfoTable 1 }

SapEgrQosQueueInfoEntry          ::= SEQUENCE
{
    sapEgrQosQId                     TEgressQueueId,
    sapEgrQosQRowStatus              RowStatus,
    sapEgrQosQLastMgmtChange         TimeStamp,
    sapEgrQosQOverrideFlags          TQosQueueAttribute,
    sapEgrQosQCBS                    TBurstSize,
    sapEgrQosQMBS                    TBurstSize,
    sapEgrQosQHiPrioOnly             TBurstPercentOrDefault,
    sapEgrQosQCIRAdaptation          TAdaptationRule,
    sapEgrQosQPIRAdaptation          TAdaptationRule,
    sapEgrQosQAdminPIR               TQosQueuePIRRate,
    sapEgrQosQAdminCIR               TQosQueueCIRRate,
    sapEgrQosQAvgOverhead            Unsigned32,
    sapEgrQosQMBSBytes               TBurstSizeBytes,
    sapEgrQosQWeight                 TWeight,
    sapEgrQosQCIRWeight              TWeight,
    sapEgrQosQAdminPIRPercent        Unsigned32,
    sapEgrQosQAdminCIRPercent        Unsigned32,
    sapEgrQosQMonitorDepth           TruthValue,
    sapEgrQosQDrpTailLowReductnMbs   TBurstPercentOrDefault,
    sapEgrQosQAdminPIRHi             TmnxQosRateHigh32,
    sapEgrQosQAdminPIRLo             TmnxQosRateLow32,
    sapEgrQosQAdminCIRHi             TmnxQosRateHigh32,
    sapEgrQosQAdminCIRLo             TmnxQosRateLow32,
    sapEgrQosQHsWrrWeight            Unsigned32,
    sapEgrQosQHsClassWeight          Unsigned32,
    sapEgrQosQHsWredQSlopePlcy       TNamedItemOrEmpty,
    sapEgrQosQBurstLimit             TBurstLimit,
    sapEgrQosQMonitorQueueDepth      TruthValue,
    sapEgrQosQFastPolling            TruthValue,
    sapEgrQosQViolationThreshold     Unsigned32
}

sapEgrQosQId                     OBJECT-TYPE
    SYNTAX      TEgressQueueId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQId indicates the ID of the queue whose
         parameters are to be overridden."
    ::= { sapEgrQosQueueInfoEntry 1 }

sapEgrQosQRowStatus              OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQRowStatus controls the creation and deletion of
         rows in this table."
    ::= { sapEgrQosQueueInfoEntry 2 }

sapEgrQosQLastMgmtChange         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQLastMgmtChange indicates the value of sysUpTime
         at the time of the last management change of any writable object of
         this row."
    ::= { sapEgrQosQueueInfoEntry 3 }

sapEgrQosQOverrideFlags          OBJECT-TYPE
    SYNTAX      TQosQueueAttribute
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQOverrideFlags specifies the set of attributes
         whose values have been overridden via management on this queue.
         Clearing a given flag will return the corresponding overridden
         attribute to the value defined on the SAP's ingress QoS policy.

         The sapEgrQosQMonitorQueueDepth, sapEgrQosQFastPolling and
         sapEgrQosQViolationThreshold objects are not set in
         sapEgrQosQOverrideFlags when overridden on this queue and can not be
         cleared using sapEgrQosQOverrideFlags flag."
    ::= { sapEgrQosQueueInfoEntry 4 }

sapEgrQosQCBS                    OBJECT-TYPE
    SYNTAX      TBurstSize
    UNITS       "kilobytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQCBS specifies the amount of reserved buffer
         space (in kilobytes) for this queue."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 5 }

sapEgrQosQMBS                    OBJECT-TYPE
    SYNTAX      TBurstSize
    UNITS       "kilobytes"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosQMBS specifies the maximum amount of buffer
         space (in kilobytes) allowed for this queue."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 6 }

sapEgrQosQHiPrioOnly             OBJECT-TYPE
    SYNTAX      TBurstPercentOrDefault
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosQHiPrioOnly specifies the percentage of buffer
         space for this queue, used exclusively by high priority packets.

         This object is obsoleted in 15.0 release and has been replaced with
         sapEgrQosQDrpTailLowReductnMbs object."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 7 }

sapEgrQosQCIRAdaptation          OBJECT-TYPE
    SYNTAX      TAdaptationRule
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQCIRAdaptation specifies the criteria to use to
         compute the operational CIR value for this queue, while maintaining a
         minimum offset."
    DEFVAL      { closest }
    ::= { sapEgrQosQueueInfoEntry 8 }

sapEgrQosQPIRAdaptation          OBJECT-TYPE
    SYNTAX      TAdaptationRule
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQPIRAdaptation specifies the criteria to use to
         compute the operational PIR value for this queue, while maintaining a
         minimum offset."
    DEFVAL      { closest }
    ::= { sapEgrQosQueueInfoEntry 9 }

sapEgrQosQAdminPIR               OBJECT-TYPE
    SYNTAX      TQosQueuePIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosQAdminPIR specifies the desired PIR value for
         this queue. This object is obsoleted in 15.0 release and has been
         replaced with sapEgrQosQAdminPIRHi and sapEgrQosQAdminPIRLo objects."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 10 }

sapEgrQosQAdminCIR               OBJECT-TYPE
    SYNTAX      TQosQueueCIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosQAdminCIR specifies the desired CIR value for
         this queue. This object is obsoleted in 15.0 release and has been
         replaced with sapEgrQosQAdminCIRHi and sapEgrQosQAdminCIRLo objects."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 11 }

sapEgrQosQAvgOverhead            OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAvgOverhead specifies the encapsulation
         overhead, in centipercent, used to translate packet-based rate to
         frame-based rate and vice versa."
    DEFVAL      { 0 }
    ::= { sapEgrQosQueueInfoEntry 12 }

sapEgrQosQMBSBytes               OBJECT-TYPE
    SYNTAX      TBurstSizeBytes
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQMBSBytes specifies the maximum amount of buffer
         space (in bytes) allowed for this queue."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 13 }

sapEgrQosQWeight                 OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQWeight specifies the weight that needs to be
         used by the scheduler to which this queue would be feeding."
    DEFVAL      { 1 }
    ::= { sapEgrQosQueueInfoEntry 14 }

sapEgrQosQCIRWeight              OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQCIRWeight specifies the weight that should be
         assigned to this queue by the parent scheduler among all the entities
         feeding into the parent, when the traffic is conforming to the
         committed rate.

         A value of '0' specifies that the queue will not receive bandwidth for
         the 'within-cir' pass on its parent scheduler."
    DEFVAL      { 1 }
    ::= { sapEgrQosQueueInfoEntry 15 }

sapEgrQosQAdminPIRPercent        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAdminPIRPercent specifies the desired PIR value
         for this queue as a percentage."
    DEFVAL      { 10000 }
    ::= { sapEgrQosQueueInfoEntry 16 }

sapEgrQosQAdminCIRPercent        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAdminCIRPercent specifies the desired CIR value
         for this queue as a percentage."
    DEFVAL      { 0 }
    ::= { sapEgrQosQueueInfoEntry 17 }

sapEgrQosQMonitorDepth           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosQMonitorDepth specifies whether to enable queue
         depth monitoring for this specified queue.

         This object is obsoleted in 21.2 Release. It is replaced by
         sapEgrQosQMonitorQueueDepth."
    DEFVAL      { false }
    ::= { sapEgrQosQueueInfoEntry 18 }

sapEgrQosQDrpTailLowReductnMbs   OBJECT-TYPE
    SYNTAX      TBurstPercentOrDefault
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQDrpTailLowReductnMbs specifies the percentage
         at which low drop tail is being reduced from the MBS specified by
         sapEgrQosQMBSBytes."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 19 }

sapEgrQosQAdminPIRHi             OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAdminPIRHi specifies the upper 32 bits of the
         desired PIR value for this queue.

         This value should always be set along with sapEgrQosQAdminPIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrQosQAdminPIRHi along with the value of
         sapEgrQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrQosQueueInfoEntry 20 }

sapEgrQosQAdminPIRLo             OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAdminPIRLo specifies the lower 32 bits of the
         desired PIR value for this queue.

         This value should always be set along with sapEgrQosQAdminPIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrQosQAdminPIRHi along with the value of
         sapEgrQosQAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrQosQueueInfoEntry 21 }

sapEgrQosQAdminCIRHi             OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAdminCIRHi specifies the upper 32 bits of the
         desired CIR value for this queue.

         This value should always be set along with sapEgrQosQAdminCIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrQosQAdminCIRHi along with the value of
         sapEgrQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 0 }
    ::= { sapEgrQosQueueInfoEntry 22 }

sapEgrQosQAdminCIRLo             OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQAdminCIRLo specifies the lower 32 bits of the
         desired CIR value for this queue.

         This value should always be set along with sapEgrQosQAdminCIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrQosQAdminCIRHi along with the value of
         sapEgrQosQAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         queue indicates maximum rate."
    DEFVAL      { 0 }
    ::= { sapEgrQosQueueInfoEntry 23 }

sapEgrQosQHsWrrWeight            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQHsWrrWeight specifies the Weighted Round Robin
         (WRR) weight which this queue should parent into the scheduler. The
         weight of each queue determines how much bandwidth that queue gets out
         of the total rate for the scheduling class."
    DEFVAL      { 1 }
    ::= { sapEgrQosQueueInfoEntry 24 }

sapEgrQosQHsClassWeight          OBJECT-TYPE
    SYNTAX      Unsigned32 (1 | 2 | 4 | 8)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQHsClassWeight specifies the weight of the
         scheduling class."
    DEFVAL      { 1 }
    ::= { sapEgrQosQueueInfoEntry 25 }

sapEgrQosQHsWredQSlopePlcy       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQHsWredQSlopePlcy specifies the name of the
         slope policy."
    DEFVAL      { "" }
    ::= { sapEgrQosQueueInfoEntry 26 }

sapEgrQosQBurstLimit             OBJECT-TYPE
    SYNTAX      TBurstLimit
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQBurstLimit specifies the explicit shaping burst
         size of a queue."
    DEFVAL      { -1 }
    ::= { sapEgrQosQueueInfoEntry 27 }

sapEgrQosQMonitorQueueDepth      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQMonitorQueueDepth specifies whether to enable
         queue depth monitoring for this specified queue.

         When overridden this object does not update sapEgrQosQOverrideFlags."
    DEFVAL      { false }
    ::= { sapEgrQosQueueInfoEntry 28 }

sapEgrQosQFastPolling            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQFastPolling indicates that the depth monitoring
         should use the new Embedded Control Processor fast-polling.

         When overridden this object does not update sapEgrQosQOverrideFlags."
    DEFVAL      { false }
    ::= { sapEgrQosQueueInfoEntry 29 }

sapEgrQosQViolationThreshold     OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..9999)
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQViolationThreshold indicates percent of the
         depth of the queue above which a violation is registered. This is
         applicable to both the existing queue depth monitoring feature and the
         fast-polling feature.

         When overridden this object does not update sapEgrQosQOverrideFlags."
    DEFVAL      { 0 }
    ::= { sapEgrQosQueueInfoEntry 30 }

sapIngQosSchedInfoTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosSchedInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to override the base parameters of a virtual
         scheduler, as defined in the associated SAP ingress scheduler policy."
    ::= { tmnxSapObjs 21 }

sapIngQosSchedInfoEntry          OBJECT-TYPE
    SYNTAX      SapIngQosSchedInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Override values for the specified SAP ingress virtual scheduler. These
         values override the corresponding ones specified in the associated SAP
         ingress scheduler policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        IMPLIED sapIngQosSName
    }
    ::= { sapIngQosSchedInfoTable 1 }

SapIngQosSchedInfoEntry          ::= SEQUENCE
{
    sapIngQosSName                   TNamedItem,
    sapIngQosSRowStatus              RowStatus,
    sapIngQosSLastMgmtChange         TimeStamp,
    sapIngQosSOverrideFlags          TVirtSchedAttribute,
    sapIngQosSPIR                    THPolVirtualSchePIRRate,
    sapIngQosSCIR                    THPolVirtualScheCIRRate,
    sapIngQosSSummedCIR              TruthValue,
    sapIngQosSPIRHi                  TmnxQosRateHigh32,
    sapIngQosSPIRLo                  TmnxQosRateLow32,
    sapIngQosSCIRHi                  TmnxQosRateHigh32,
    sapIngQosSCIRLo                  TmnxQosRateLow32,
    sapIngQosSParentWeight           TWeight,
    sapIngQosSParentCIRWeight        TWeight
}

sapIngQosSName                   OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSName indicates the name of the virtual
         scheduler whose parameters are to be overridden."
    ::= { sapIngQosSchedInfoEntry 1 }

sapIngQosSRowStatus              OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSRowStatus controls the creation and deletion of
         rows in this table."
    ::= { sapIngQosSchedInfoEntry 2 }

sapIngQosSLastMgmtChange         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSLastMgmtChange indicates the value of sysUpTime
         at the time of the last management change of any writable object of
         this row."
    ::= { sapIngQosSchedInfoEntry 3 }

sapIngQosSOverrideFlags          OBJECT-TYPE
    SYNTAX      TVirtSchedAttribute
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSOverrideFlags specifies the set of attributes
         whose values have been overridden via management on this virtual
         scheduler. Clearing a given flag will return the corresponding
         overridden attribute to the value defined on the SAP's ingress
         scheduler policy."
    ::= { sapIngQosSchedInfoEntry 4 }

sapIngQosSPIR                    OBJECT-TYPE
    SYNTAX      THPolVirtualSchePIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosSPIR specifies the desired PIR value for this
         virtual scheduler.

         This object is obsoleted in 11.0 Release. It is replaced by
         sapIngQosSPIRHi and sapIngQosSPIRLo."
    DEFVAL      { -1 }
    ::= { sapIngQosSchedInfoEntry 5 }

sapIngQosSCIR                    OBJECT-TYPE
    SYNTAX      THPolVirtualScheCIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosSCIR specifies the desired CIR value for this
         virtual scheduler.

         This object is obsoleted in 11.0 Release. It is replaced by
         sapIngQosSCIRHi and sapIngQosSCIRLo."
    DEFVAL      { -1 }
    ::= { sapIngQosSchedInfoEntry 6 }

sapIngQosSSummedCIR              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSSummedCIR specifies if the CIR should be used
         as the summed CIR values of the children schedulers or queues. If set
         to 'true', the applicable scheduler CIR (sapIngQosSCIR) loses its
         meaning."
    DEFVAL      { true }
    ::= { sapIngQosSchedInfoEntry 7 }

sapIngQosSPIRHi                  OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSPIRHi specifies upper 32 bits of the pir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapIngQosSPIRLo, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapIngQosSPIRHi along with the value of
         sapIngQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapIngQosSchedInfoEntry 8 }

sapIngQosSPIRLo                  OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSPIRLo specifies lower 32 bits of the pir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapIngQosSPIRHi, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapIngQosSPIRHi along with the value of
         sapIngQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapIngQosSchedInfoEntry 9 }

sapIngQosSCIRHi                  OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSCIRHi specifies upper 32 bits of the cir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapIngQosSCIRLo, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapIngQosSCIRHi along with the value of
         sapIngQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapIngQosSchedInfoEntry 10 }

sapIngQosSCIRLo                  OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSCIRLo specifies lower 32 bits of the cir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapIngQosSCIRHi, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapIngQosSCIRHi along with the value of
         sapIngQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapIngQosSchedInfoEntry 11 }

sapIngQosSParentWeight           OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSParentWeight specifies the weight that needs to
         be used by this virtual scheduler to which this queue would be
         feeding."
    DEFVAL      { 1 }
    ::= { sapIngQosSchedInfoEntry 12 }

sapIngQosSParentCIRWeight        OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosSParentCIRWeight specifies the weight that needs
         to be used until the committed rate by this virtual scheduler to which
         this queue would be feeding."
    DEFVAL      { 1 }
    ::= { sapIngQosSchedInfoEntry 13 }

sapEgrQosSchedInfoTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosSchedInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to override the base parameters of a virtual
         scheduler, as defined in the associated SAP egress scheduler policy."
    ::= { tmnxSapObjs 22 }

sapEgrQosSchedInfoEntry          OBJECT-TYPE
    SYNTAX      SapEgrQosSchedInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Override values for the specified SAP egress virtual scheduler. These
         values override the corresponding ones specified in the associated SAP
         egress scheduler policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        IMPLIED sapEgrQosSName
    }
    ::= { sapEgrQosSchedInfoTable 1 }

SapEgrQosSchedInfoEntry          ::= SEQUENCE
{
    sapEgrQosSName                   TNamedItem,
    sapEgrQosSRowStatus              RowStatus,
    sapEgrQosSLastMgmtChange         TimeStamp,
    sapEgrQosSOverrideFlags          TVirtSchedAttribute,
    sapEgrQosSPIR                    THPolVirtualSchePIRRate,
    sapEgrQosSCIR                    THPolVirtualScheCIRRate,
    sapEgrQosSSummedCIR              TruthValue,
    sapEgrQosSPIRHi                  TmnxQosRateHigh32,
    sapEgrQosSPIRLo                  TmnxQosRateLow32,
    sapEgrQosSCIRHi                  TmnxQosRateHigh32,
    sapEgrQosSCIRLo                  TmnxQosRateLow32,
    sapEgrQosSParentWeight           TWeight,
    sapEgrQosSParentCIRWeight        TWeight
}

sapEgrQosSName                   OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSName indicates the name of the virtual
         scheduler whose parameters are to be overridden."
    ::= { sapEgrQosSchedInfoEntry 1 }

sapEgrQosSRowStatus              OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSRowStatus controls the creation and deletion of
         rows in this table."
    ::= { sapEgrQosSchedInfoEntry 2 }

sapEgrQosSLastMgmtChange         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSLastMgmtChange indicates the value of sysUpTime
         at the time of the last management change of any writable object of
         this row."
    ::= { sapEgrQosSchedInfoEntry 3 }

sapEgrQosSOverrideFlags          OBJECT-TYPE
    SYNTAX      TVirtSchedAttribute
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSOverrideFlags specifies the set of attributes
         whose values have been overridden via management on this virtual
         scheduler. Clearing a given flag will return the corresponding
         overridden attribute to the value defined on the SAP's egress
         scheduler policy."
    ::= { sapEgrQosSchedInfoEntry 4 }

sapEgrQosSPIR                    OBJECT-TYPE
    SYNTAX      THPolVirtualSchePIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosSPIR specifies the desired PIR value for this
         virtual scheduler.

         This object is obsoleted in 11.0 Release. It is replaced by
         sapEgrQosSPIRHi and sapEgrQosSPIRLo."
    DEFVAL      { -1 }
    ::= { sapEgrQosSchedInfoEntry 5 }

sapEgrQosSCIR                    OBJECT-TYPE
    SYNTAX      THPolVirtualScheCIRRate
    UNITS       "kilo bits per second"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosSCIR specifies the desired CIR value for this
         virtual scheduler.

         This object is obsoleted in 11.0 Release. It is replaced by
         sapEgrQosSCIRHi and sapEgrQosSCIRLo."
    DEFVAL      { -1 }
    ::= { sapEgrQosSchedInfoEntry 6 }

sapEgrQosSSummedCIR              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSSummedCIR specifies if the CIR should be used
         as the summed CIR values of the children schedulers or queues. If set
         to 'true', the applicable scheduler CIR (sapEgrQosSCIR) loses its
         meaning."
    DEFVAL      { true }
    ::= { sapEgrQosSchedInfoEntry 7 }

sapEgrQosSPIRHi                  OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSPIRHi specifies upper 32 bits of the pir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapEgrQosSPIRLo, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapEgrQosSPIRHi along with the value of
         sapEgrQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrQosSchedInfoEntry 8 }

sapEgrQosSPIRLo                  OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSPIRLo specifies lower 32 bits of the pir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapEgrQosSPIRHi, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapEgrQosSPIRHi along with the value of
         sapEgrQosSPIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrQosSchedInfoEntry 9 }

sapEgrQosSCIRHi                  OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSCIRHi specifies upper 32 bits of the cir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapEgrQosSCIRLo, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapEgrQosSCIRHi along with the value of
         sapEgrQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrQosSchedInfoEntry 10 }

sapEgrQosSCIRLo                  OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSCIRLo specifies lower 32 bits of the cir-rate
         allowed for this virtual scheduler.

         This value should always be set along with sapEgrQosSCIRHi, otherwise
         an 'inconsistentValue' error is returned.

         When the value of sapEgrQosSCIRHi along with the value of
         sapEgrQosSCIRLo is set to 4294967295 (0xFFFFFFFF), rate for this
         virtual scheduler indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrQosSchedInfoEntry 11 }

sapEgrQosSParentWeight           OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSParentWeight specifies the weight that needs to
         be used by this virtual scheduler to which this queue would be
         feeding."
    DEFVAL      { 1 }
    ::= { sapEgrQosSchedInfoEntry 12 }

sapEgrQosSParentCIRWeight        OBJECT-TYPE
    SYNTAX      TWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosSParentCIRWeight specifies the weight that needs
         to be used until the committed rate by this virtual scheduler to which
         this queue would be feeding."
    DEFVAL      { 1 }
    ::= { sapEgrQosSchedInfoEntry 13 }

sapSubMgmtInfoTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapSubMgmtInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP subscriber management information."
    ::= { tmnxSapObjs 23 }

sapSubMgmtInfoEntry              OBJECT-TYPE
    SYNTAX      SapSubMgmtInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Subscriber management specific information about a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapSubMgmtInfoTable 1 }

SapSubMgmtInfoEntry              ::= SEQUENCE
{
    sapSubMgmtAdminStatus            TmnxEnabledDisabled,
    sapSubMgmtDefSubProfile          ServObjName,
    sapSubMgmtDefSlaProfile          ServObjName,
    sapSubMgmtSubIdentPolicy         ServObjName,
    sapSubMgmtSubscriberLimit        TmnxSapSubscriberLimit,
    sapSubMgmtProfiledTrafficOnly    TruthValue,
    sapSubMgmtNonSubTrafficSubIdent  TmnxSubIdentStringOrEmpty,
    sapSubMgmtNonSubTrafficSubProf   ServObjName,
    sapSubMgmtNonSubTrafficSlaProf   ServObjName,
    sapSubMgmtMacDaHashing           TruthValue,
    sapSubMgmtDefSubIdent            TmnxDefSubIdSource,
    sapSubMgmtDefSubIdentString      TmnxSubIdentStringOrEmpty,
    sapSubMgmtDefAppProfile          ServObjName,
    sapSubMgmtNonSubTrafficAppProf   ServObjName,
    sapSubMgmtDefInterDestId         TmnxDefInterDestIdSource,
    sapSubMgmtDefInterDestIdString   DisplayString,
    sapSubMgmtDefFilterProfile       TNamedItemOrEmpty
}

sapSubMgmtAdminStatus            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtAdminStatus specifies whether enhanced
         subscriber management is enabled on this SAP."
    DEFVAL      { disabled }
    ::= { sapSubMgmtInfoEntry 1 }

sapSubMgmtDefSubProfile          OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefSubProfile specifies the default subscriber
         profile applicable on this SAP. The corresponding profile is defined
         in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.

         A value of 'default' is not allowed for this object."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 2 }

sapSubMgmtDefSlaProfile          OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefSlaProfile specifies the default SLA profile
         applicable on this SAP. The corresponding profile is defined in
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 3 }

sapSubMgmtSubIdentPolicy         OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtSubIdentPolicy specifies the subscriber
         identification policy applicable on this SAP. The corresponding policy
         is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 4 }

sapSubMgmtSubscriberLimit        OBJECT-TYPE
    SYNTAX      TmnxSapSubscriberLimit
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtSubscriberLimit specifies the maximum number of
         subscribers allowed for this SAP.

         If the value is 0, there is no limit. Only if the value is 1, the
         'single-sub-parameters' defined with objects
         sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubProf and
         sapSubMgmtNonSubTrafficSlaProf are meaningful."
    DEFVAL      { 1 }
    ::= { sapSubMgmtInfoEntry 5 }

sapSubMgmtProfiledTrafficOnly    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtProfiledTrafficOnly specifies whether only
         profiled traffic is applicable for this SAP. If set to 'true', all SAP
         queues will be deleted.

         The value of this object is only meaningful if
         sapSubMgmtSubscriberLimit is set to 1."
    DEFVAL      { false }
    ::= { sapSubMgmtInfoEntry 6 }

sapSubMgmtNonSubTrafficSubIdent  OBJECT-TYPE
    SYNTAX      TmnxSubIdentStringOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtNonSubTrafficSubIdent specifies the subscriber
         identification applicable on this SAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         sapSubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 7 }

sapSubMgmtNonSubTrafficSubProf   OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtNonSubTrafficSubProf specifies the subscriber
         profile applicable on this SAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         sapSubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 8 }

sapSubMgmtNonSubTrafficSlaProf   OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtNonSubTrafficSlaProf specifies the SLA profile
         applicable on this SAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         sapSubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 9 }

sapSubMgmtMacDaHashing           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtMacDaHashing specifies whether subscriber
         traffic egressing a LAG SAP has its egress LAG link selected by a
         function of the MAC destination address instead of subscriber id.

         The value of this object is only meaningful if sapSubMgmtAdminStatus
         is set to 'enabled' and can only be configured for TLS services."
    DEFVAL      { false }
    ::= { sapSubMgmtInfoEntry 10 }

sapSubMgmtDefSubIdent            OBJECT-TYPE
    SYNTAX      TmnxDefSubIdSource
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefSubIdent specifies what is used as the
         default subscriber identification applicable on this SAP.

         This value is used in case no other source (like Radius) provides a
         subscriber identification string.

         If the value of this objects is set to 'useSapId', the SAP-id is used
         as the default subscriber identification string. In this case,
         sapSubMgmtDefSubIdentString must contain the empty string.

         If the value of this objects is set to 'useAutoId', the auto-generated
         subscriber identification string, as defined in
         tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber
         identification string. In this case, sapSubMgmtDefSubIdentString must
         contain the empty string.

         If the value of this object is set to 'useString', the value of
         sapSubMgmtDefSubIdentString is used as the default subscriber
         identification string. In this case, an empty
         sapSubMgmtDefSubIdentString means that there is no default subscriber
         identification configured."
    DEFVAL      { useString }
    ::= { sapSubMgmtInfoEntry 11 }

sapSubMgmtDefSubIdentString      OBJECT-TYPE
    SYNTAX      TmnxSubIdentStringOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefSubIdentString specifies the default
         subscriber identification string applicable on this SAP."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 12 }

sapSubMgmtDefAppProfile          OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefAppProfile specifies the default application
         profile applicable on this SAP. The corresponding profile is defined
         in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 13 }

sapSubMgmtNonSubTrafficAppProf   OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtNonSubTrafficAppProf specifies the application
         profile applicable on this SAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         sapSubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 14 }

sapSubMgmtDefInterDestId         OBJECT-TYPE
    SYNTAX      TmnxDefInterDestIdSource
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefInterDestId specifies what is used as the
         default intermediate destination identifier applicable on this SAP.

         This value is used in case no other source (like Radius) provides an
         intermediate destination identifier.

         If the value of this object is set to 'useString', the value of
         sapSubMgmtDefInterDestIdString is used as the default intermediate
         destination identifier. In this case, an empty
         sapSubMgmtDefInterDestIdString means that there is no default
         intermediate destination identifier configured.

         If the value of this object is set to 'useTopQTag', the top q-tag of
         this SAP is used as the default intermediate destination identifier.
         In this case, sapSubMgmtDefInterDestIdString must contain the empty
         string.

         If the value of this object is set to 'useVpi', the ATM VPI of this
         SAP is used as the default intermediate destination identifier. In
         this case, sapSubMgmtDefInterDestIdString must contain the empty
         string."
    DEFVAL      { useString }
    ::= { sapSubMgmtInfoEntry 15 }

sapSubMgmtDefInterDestIdString   OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapSubMgmtDefInterDestIdString specifies the default
         intermediate destination identifier applicable on this SAP."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 16 }

sapSubMgmtDefFilterProfile       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapSubMgmtDefFilterProfile specifies the
         default filter profile for this SAP. The specified filter profile
         needs to exists in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable."
    DEFVAL      { "" }
    ::= { sapSubMgmtInfoEntry 17 }

sapTlsMstiTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsMstiEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains Multiple Spanning Tree Instance information for
         the SAP. Each management VPLS running MSTP can have up to 15 MSTI. An
         entry in this table is automatically created when a tlsMstiEntry is
         created."
    ::= { tmnxSapObjs 24 }

sapTlsMstiEntry                  OBJECT-TYPE
    SYNTAX      SapTlsMstiEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific MSTI for a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tlsMstiInstanceId
    }
    ::= { sapTlsMstiTable 1 }

SapTlsMstiEntry                  ::= SEQUENCE
{
    sapTlsMstiPriority               Integer32,
    sapTlsMstiPathCost               Integer32,
    sapTlsMstiLastMgmtChange         TimeStamp,
    sapTlsMstiPortRole               StpPortRole,
    sapTlsMstiPortState              TStpPortState,
    sapTlsMstiDesignatedBridge       BridgeId,
    sapTlsMstiDesignatedPort         Integer32
}

sapTlsMstiPriority               OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMstiPriority specifies the value of the
         port priority field which is contained in the most significant 4 bits
         of the 16-bit Port ID associated with this SAP and MSTI. As only the
         most significant 4 bits of the value are used, the actual value of
         this object is limited to multiples of 16: e.g. the agent rounds down
         the value to one of: 0, 16, 32, .. , 224, 240."
    DEFVAL      { 128 }
    ::= { sapTlsMstiEntry 1 }

sapTlsMstiPathCost               OBJECT-TYPE
    SYNTAX      Integer32 (1..200000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMstiPathCost specifies the contribution
         of this port to the MSTI path cost of paths towards the spanning tree
         regional root which include this port."
    DEFVAL      { 10 }
    ::= { sapTlsMstiEntry 2 }

sapTlsMstiLastMgmtChange         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMstiLastMgmtChange indicates the value
         of sysUpTime at the time of the most recent management-initiated
         change to this SAP MSTI information."
    ::= { sapTlsMstiEntry 3 }

sapTlsMstiPortRole               OBJECT-TYPE
    SYNTAX      StpPortRole
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapTlsMstiPortRole indicates the current role of the sap in the MSTI
         as defined by the Spanning Tree Protocol."
    ::= { sapTlsMstiEntry 4 }

sapTlsMstiPortState              OBJECT-TYPE
    SYNTAX      TStpPortState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMstiPortState indicates the port's
         current state as defined by application of the Spanning Tree Protocol.
         This state controls what action a port takes on reception of a frame.
         If the bridge has detected a port that is malfunctioning it will place
         that port into the 'broken' state."
    ::= { sapTlsMstiEntry 5 }

sapTlsMstiDesignatedBridge       OBJECT-TYPE
    SYNTAX      BridgeId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMstiDesignatedBridge
         indicates  the Bridge Identifier of the bridge which this
         port considers to be the Designated Bridge for this port's
         segment for this MSTI."
    ::= { sapTlsMstiEntry 6 }

sapTlsMstiDesignatedPort         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsMstiDesignatedPort indicates the Port
         Identifier of the port on the Designated Bridge for this port's
         segment for this MSTI."
    ::= { sapTlsMstiEntry 7 }

sapIpipeInfoTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIpipeInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains IPIPE specific SAP information."
    ::= { tmnxSapObjs 25 }

sapIpipeInfoEntry                OBJECT-TYPE
    SYNTAX      SapIpipeInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "IPIPE specific information about a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapIpipeInfoTable 1 }

SapIpipeInfoEntry                ::= SEQUENCE
{
    sapIpipeCeInetAddressType        InetAddressType,
    sapIpipeCeInetAddress            InetAddress,
    sapIpipeMacRefreshInterval       Unsigned32,
    sapIpipeMacAddress               MacAddress,
    sapIpipeArpedMacAddress          MacAddress,
    sapIpipeArpedMacAddressTimeout   Unsigned32,
    sapIpipeDiscoveredCeInetAddrType InetAddressType,
    sapIpipeDiscoveredCeInetAddr     InetAddress,
    sapIpipeUseBroadcastMac          TruthValue,
    sapIpipeUsingBroadcastMac        TruthValue,
    sapIpipeIpv6LinkLocalCeInetAddr  InetAddress,
    sapIpipeIpv6GlobalCeInetAddr     InetAddress,
    sapIpipeIpv6DiscoveredMacAddress MacAddress,
    sapIpipeLegacyFaultNotification  TruthValue,
    sapIpipeRemainRecoveryTimer      Unsigned32
}

sapIpipeCeInetAddressType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpipeCeInetAddressType specifies the
         addresstype of the local end host IP of an IPIPE.

         This object is only configurable if the value of
         'svcIpipeCeAddressDiscovery' is 'disabled."
    ::= { sapIpipeInfoEntry 1 }

sapIpipeCeInetAddress            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The type of this address is determined by the value of the
         sapIpipeCeInetAddressType object.

         This object specifies the IPv4 address of the local end host of an
         IPIPE.

         This object is only configurable if the value of
         'svcIpipeCeAddressDiscovery' is 'disabled."
    ::= { sapIpipeInfoEntry 2 }

sapIpipeMacRefreshInterval       OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeMacRefreshInterval specifies the interval between
         successive attempts to refresh the MAC address of the CE device
         associated with an Ethernet ipipe SAP. If no other event (such as
         reception of an ARP request from the CE) occurs that would refresh the
         MAC address before the end of the interval, an ARP request will be
         originated from the IPIPE SAP."
    DEFVAL      { 14400 }
    ::= { sapIpipeInfoEntry 3 }

sapIpipeMacAddress               OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpipeMacAddress specifies the MAC address
         of an IPIPE Ethernet SAP."
    DEFVAL      { '000000000000'H }
    ::= { sapIpipeInfoEntry 4 }

sapIpipeArpedMacAddress          OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpipeArpedMacAddress indicates the MAC
         address of the local end host."
    ::= { sapIpipeInfoEntry 5 }

sapIpipeArpedMacAddressTimeout   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpipeArpedMacAddressTimeout indicates the
         number of seconds to wait for the sapIpipeArpedMacAddress to be
         re-refreshed."
    ::= { sapIpipeInfoEntry 6 }

sapIpipeDiscoveredCeInetAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpipeDiscoveredCeInetAddrType indicates the
         addresstype of the local end discovered host IP of an IPIPE SAP."
    ::= { sapIpipeInfoEntry 7 }

sapIpipeDiscoveredCeInetAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of this address is determined by the value of the
         sapIpipeDiscoveredCeInetAddrType object.

         This object indicates the IPv4 address of the discovered local end
         host of an IPIPE SAP."
    ::= { sapIpipeInfoEntry 8 }

sapIpipeUseBroadcastMac          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeUseBroadcastMac specifies whether to use a
         broadcast MAC address to forward traffic from the Ethernet Ipipe SAP
         when sapIpipeArpedMacAddress is not a valid MAC address (no ARPed MAC
         address).

         If svcIpipeCeAddressDiscovery is set to 'disabled (2)', this value
         cannot be changed from the default value.

         For non-Ethernet SAPs this value cannot be changed from the default
         value."
    DEFVAL      { false }
    ::= { sapIpipeInfoEntry 9 }

sapIpipeUsingBroadcastMac        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeUsingBroadcastMac indicates whether a broadcast
         MAC address is currently being used to forward traffic from the
         Ethernet Ipipe SAP."
    ::= { sapIpipeInfoEntry 10 }

sapIpipeIpv6LinkLocalCeInetAddr  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the discovered link local IPv6 address of the
         local end host of an IPIPE SAP."
    ::= { sapIpipeInfoEntry 11 }

sapIpipeIpv6GlobalCeInetAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the discovered global IPv6 address of the local
         end host of an IPIPE SAP."
    ::= { sapIpipeInfoEntry 12 }

sapIpipeIpv6DiscoveredMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpipeIpv6DiscoveredMacAddress indicates the
         MAC address of the IPv6 local end host."
    ::= { sapIpipeInfoEntry 13 }

sapIpipeLegacyFaultNotification  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeLegacyFaultNotification indicates whether SAP
         will propagate fault towards the legacy side."
    ::= { sapIpipeInfoEntry 14 }

sapIpipeRemainRecoveryTimer      OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "deciseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeRemainRecoveryTimer indicates remaining value for
         the recovery timer.

         A value of zero indicates that the timer is not ongoing."
    ::= { sapIpipeInfoEntry 15 }

sapTodMonitorTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTodMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "This table contains information on configurable objects on SAP level,
         that can be modified by a scheduled policy.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 26 }

sapTodMonitorEntry               OBJECT-TYPE
    SYNTAX      SapTodMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Information about ToD policy modifiable config data for a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTodMonitorTable 1 }

SapTodMonitorEntry               ::= SEQUENCE
{
    sapCurrentIngressIpFilterId      TFilterID,
    sapCurrentIngressIpv6FilterId    TFilterID,
    sapCurrentIngressMacFilterId     TFilterID,
    sapCurrentIngressQosPolicyId     TSapIngressPolicyID,
    sapCurrentIngressQosSchedPlcy    ServObjName,
    sapCurrentEgressIpFilterId       TFilterID,
    sapCurrentEgressIpv6FilterId     TFilterID,
    sapCurrentEgressMacFilterId      TFilterID,
    sapCurrentEgressQosPolicyId      TSapEgressPolicyID,
    sapCurrentEgressQosSchedPlcy     ServObjName,
    sapIntendedIngressIpFilterId     TFilterID,
    sapIntendedIngressIpv6FilterId   TFilterID,
    sapIntendedIngressMacFilterId    TFilterID,
    sapIntendedIngressQosPolicyId    TSapIngressPolicyID,
    sapIntendedIngressQosSchedPlcy   ServObjName,
    sapIntendedEgressIpFilterId      TFilterID,
    sapIntendedEgressIpv6FilterId    TFilterID,
    sapIntendedEgressMacFilterId     TFilterID,
    sapIntendedEgressQosPolicyId     TSapEgressPolicyID,
    sapIntendedEgressQosSchedPlcy    ServObjName
}

sapCurrentIngressIpFilterId      OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentIngressIpFilterId indicates the
         index in the tIPFilterTable corresponding to the ingress filter
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapIngressIpFilterId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 1 }

sapCurrentIngressIpv6FilterId    OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentIngressIpv6FilterId indicates the
         index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapIngressIpv6FilterId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 2 }

sapCurrentIngressMacFilterId     OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentIngressMacFilterId indicates the
         index in the tMacFilterTable corresponding to the ingress Mac filter
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapIngressMacFilterId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 3 }

sapCurrentIngressQosPolicyId     OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentIngressQosPolicyId indicates the
         index in the tSapIngressTable corresponding to the ingress Qos Policy
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapIngressQosPolicyId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 4 }

sapCurrentIngressQosSchedPlcy    OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentIngressQosSchedPlcy indicates the
         ingress QoS scheduler on this SAP, or zero if none is currently
         active. The active policy may deviate from
         sapIngressQosSchedulerPolicy in case it is overruled by a ToD Suite
         policy defined on this SAP, or on the multi-service this SAP belongs
         to. "
    ::= { sapTodMonitorEntry 5 }

sapCurrentEgressIpFilterId       OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentEgressIpFilterId indicates the index
         in the tIPFilterTable corresponding to the Egress filter applied on
         this SAP, or zero if no filter is currently active. The active filter
         may deviate from sapEgressIpFilterId in case it is overruled by a ToD
         Suite policy."
    ::= { sapTodMonitorEntry 6 }

sapCurrentEgressIpv6FilterId     OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentEgressIpv6FilterId indicates the
         index in the tIPv6FilterTable corresponding to the Egress Ipv6 filter
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapEgressIpv6FilterId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 7 }

sapCurrentEgressMacFilterId      OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentEgressMacFilterId indicates the
         index in the tMacFilterTable corresponding to the Egress Mac filter
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapEgressMacFilterId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 8 }

sapCurrentEgressQosPolicyId      OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentEgressQosPolicyId indicates the
         index in the tSapEgressTable corresponding to the Egress Qos Policy
         applied on this SAP, or zero if no filter is currently active. The
         active filter may deviate from sapEgressQosPolicyId in case it is
         overruled by a ToD Suite policy."
    ::= { sapTodMonitorEntry 9 }

sapCurrentEgressQosSchedPlcy     OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapCurrentEgressQosSchedPlcy indicates the
         Egress QoS scheduler on this SAP, or zero if none is currently active.
         The active policy may deviate from sapEgressQosSchedulerPolicy in case
         it is overruled by a ToD Suite policy defined on this SAP, or on the
         multi-customer this SAP belongs to."
    ::= { sapTodMonitorEntry 10 }

sapIntendedIngressIpFilterId     OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedIngressIpFilterId indicates the
         index in the tIPFilterTable corresponding to the ingress IP filter
         that should be applied on this SAP. If it deviates from
         sapCurrentIngressIpFilterId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 11 }

sapIntendedIngressIpv6FilterId   OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedIngressIpv6FilterId indicates the
         index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter
         that should be applied on this SAP. If it deviates from
         sapCurrentIngressIpv6FilterId, this means that there was a problem
         when trying to activate this filter. It can only deviate when using
         ToD Suites for the SAP. When the ToD Suites decides that a new filter
         must be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 12 }

sapIntendedIngressMacFilterId    OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedIngressMacFilterId indicates the
         index in the tMacFilterTable corresponding to the ingress Mac filter
         that should be applied on this SAP. If it deviates from
         sapCurrentIngressMacFilterId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 13 }

sapIntendedIngressQosPolicyId    OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedIngressQosPolicyId indicates the
         index in the tSapIngressTable corresponding to the ingress Qos policy
         that should be applied on this SAP. If it deviates from
         sapCurrentIngressQosPolicyId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 14 }

sapIntendedIngressQosSchedPlcy   OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedIngressQosSchedPlcy indicates the
         ingress QoS scheduler that should be applied on this SAP. If it
         deviates from sapCurrentIngressQosSchedPlcy, this means that there was
         a problem when trying to activate this filter. It can only deviate
         when using ToD Suites for the SAP. When the ToD Suites decides that a
         new filter must be applied, it will try to do this. If it fails, the
         current and intended field are not equal."
    ::= { sapTodMonitorEntry 15 }

sapIntendedEgressIpFilterId      OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedEgressIpFilterId indicates the
         index in the tIPFilterTable corresponding to the Egress IP filter
         scheduler that should be applied on this SAP. If it deviates from
         sapCurrentEgressIpFilterId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 16 }

sapIntendedEgressIpv6FilterId    OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedEgressIpv6FilterId indicates the
         index in the tIPv6FilterTable corresponding to the Egress IPv6 filter
         scheduler that should be applied on this SAP. If it deviates from
         sapCurrentEgressIpv6FilterId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 17 }

sapIntendedEgressMacFilterId     OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedEgressMacFilterId indicates the
         index in the tMacFilterTable corresponding to the Egress mac filter
         scheduler that should be applied on this SAP. If it deviates from
         sapCurrentEgressMacFilterId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 18 }

sapIntendedEgressQosPolicyId     OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedEgressQosPolicyId indicates the
         index in the tSapEgressTable corresponding to the Egress Qos Policy
         that should be applied on this SAP. If it deviates from
         sapCurrentEgressQosPolicyId, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 19 }

sapIntendedEgressQosSchedPlcy    OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIntendedEgressQosSchedPlcy indicates the
         index in the tSapEgressTable corresponding to the Egress Qos Scheduler
         policy that should be applied on this SAP. If it deviates from
         sapCurrentEgressQosSchedPlcy, this means that there was a problem when
         trying to activate this filter. It can only deviate when using ToD
         Suites for the SAP. When the ToD Suites decides that a new filter must
         be applied, it will try to do this. If it fails, the current and
         intended field are not equal."
    ::= { sapTodMonitorEntry 20 }

sapIngrQosPlcyStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngrQosPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains Ingress Qos policy related statistics for a SAP.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 27 }

sapIngrQosPlcyStatsEntry         OBJECT-TYPE
    SYNTAX      SapIngrQosPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics about a specific Ingress Qos Policy applied on a specific
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIgQosPlcyId
    }
    ::= { sapIngrQosPlcyStatsTable 1 }

SapIngrQosPlcyStatsEntry         ::= SEQUENCE
{
    sapIgQosPlcyId                   TSapIngressPolicyID,
    sapIgQosPlcyDroppedHiPrioPackets Counter64,
    sapIgQosPlcyDroppedHiPrioOctets  Counter64,
    sapIgQosPlcyDroppedLoPrioPackets Counter64,
    sapIgQosPlcyDroppedLoPrioOctets  Counter64,
    sapIgQosPlcyForwardedInProfPackets Counter64,
    sapIgQosPlcyForwardedInProfOctets Counter64,
    sapIgQosPlcyForwardedOutProfPackets Counter64,
    sapIgQosPlcyForwardedOutProfOctets Counter64
}

sapIgQosPlcyId                   OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyId indicates the row index in the
         tSapIngressTable corresponding to this ingress QoS policy, or one if
         no policy is specified."
    ::= { sapIngrQosPlcyStatsEntry 1 }

sapIgQosPlcyDroppedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyDroppedHiPrioPackets indicates the
         number of high priority packets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngrQosPlcyStatsEntry 2 }

sapIgQosPlcyDroppedHiPrioOctets  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyDroppedHiPrioOctets indicates the
         number of high priority octets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngrQosPlcyStatsEntry 3 }

sapIgQosPlcyDroppedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyDroppedLoPrioPackets indicates the
         number of low priority packets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngrQosPlcyStatsEntry 4 }

sapIgQosPlcyDroppedLoPrioOctets  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyDroppedLoPrioOctets indicates the
         number of low priority octets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngrQosPlcyStatsEntry 5 }

sapIgQosPlcyForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyForwardedInProfPackets indicates
         the number of in-profile packets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngrQosPlcyStatsEntry 6 }

sapIgQosPlcyForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyForwardedInProfOctets indicates
         the number of in-profile octets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngrQosPlcyStatsEntry 7 }

sapIgQosPlcyForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyForwardedOutProfPackets indicates
         the number of out-of-profile packets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngrQosPlcyStatsEntry 8 }

sapIgQosPlcyForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyForwardedOutProfOctets indicates
         the number of out-of-profile octets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngrQosPlcyStatsEntry 9 }

sapEgrQosPlcyStatsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains Egress Qos policy related statistics for a SAP.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 28 }

sapEgrQosPlcyStatsEntry          OBJECT-TYPE
    SYNTAX      SapEgrQosPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics about a specific Egress Qos Policy applied on a specific
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgQosPlcyId
    }
    ::= { sapEgrQosPlcyStatsTable 1 }

SapEgrQosPlcyStatsEntry          ::= SEQUENCE
{
    sapEgQosPlcyId                   TSapEgressPolicyID,
    sapEgQosPlcyDroppedInProfPackets Counter64,
    sapEgQosPlcyDroppedInProfOctets  Counter64,
    sapEgQosPlcyDroppedOutProfPackets Counter64,
    sapEgQosPlcyDroppedOutProfOctets Counter64,
    sapEgQosPlcyForwardedInProfPackets Counter64,
    sapEgQosPlcyForwardedInProfOctets Counter64,
    sapEgQosPlcyForwardedOutProfPackets Counter64,
    sapEgQosPlcyForwardedOutProfOctets Counter64
}

sapEgQosPlcyId                   OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyId indicates the row index in the
         tSapEgressTable corresponding to this egress QoS policy, or one if no
         policy is specified."
    ::= { sapEgrQosPlcyStatsEntry 1 }

sapEgQosPlcyDroppedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyDroppedInProfPackets indicates the
         number of in-profile packets, as determined by the SAP egress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapEgrQosPlcyStatsEntry 2 }

sapEgQosPlcyDroppedInProfOctets  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyDroppedInProfOctets indicates the
         number of in-profile octets, as determined by the SAP egress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapEgrQosPlcyStatsEntry 3 }

sapEgQosPlcyDroppedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyDroppedOutProfPackets indicates
         the number of out-profile packets, as determined by the SAP egress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapEgrQosPlcyStatsEntry 4 }

sapEgQosPlcyDroppedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyDroppedOutProfOctets indicates the
         number of out-profile octets, as determined by the SAP egress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapEgrQosPlcyStatsEntry 5 }

sapEgQosPlcyForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyForwardedInProfPackets indicates
         the number of in-profile packets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyStatsEntry 6 }

sapEgQosPlcyForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyForwardedInProfOctets indicates
         the number of in-profile octets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyStatsEntry 7 }

sapEgQosPlcyForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyForwardedOutProfPackets indicates
         the number of out-of-profile packets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyStatsEntry 8 }

sapEgQosPlcyForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyForwardedOutProfOctets indicates
         the number of out-of-profile octets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyStatsEntry 9 }

sapIngQosPlcyQueueStatsTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosPlcyQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains ingress QoS queue SAP statistics, per Ingress
         QoS Policy the queue was used by.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 29 }

sapIngQosPlcyQueueStatsEntry     OBJECT-TYPE
    SYNTAX      SapIngQosPlcyQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS queue for a given Qos
         policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIgQosPlcyQueuePlcyId,
        sapIgQosPlcyQueueId
    }
    ::= { sapIngQosPlcyQueueStatsTable 1 }

SapIngQosPlcyQueueStatsEntry     ::= SEQUENCE
{
    sapIgQosPlcyQueuePlcyId          TSapIngressPolicyID,
    sapIgQosPlcyQueueId              TSapIngQueueId,
    sapIgQosPlcyQueueStatsOfferedHiPrioPackets Counter64,
    sapIgQosPlcyQueueStatsDroppedHiPrioPackets Counter64,
    sapIgQosPlcyQueueStatsOfferedLoPrioPackets Counter64,
    sapIgQosPlcyQueueStatsDroppedLoPrioPackets Counter64,
    sapIgQosPlcyQueueStatsOfferedHiPrioOctets Counter64,
    sapIgQosPlcyQueueStatsDroppedHiPrioOctets Counter64,
    sapIgQosPlcyQueueStatsOfferedLoPrioOctets Counter64,
    sapIgQosPlcyQueueStatsDroppedLoPrioOctets Counter64,
    sapIgQosPlcyQueueStatsForwardedInProfPackets Counter64,
    sapIgQosPlcyQueueStatsForwardedOutProfPackets Counter64,
    sapIgQosPlcyQueueStatsForwardedInProfOctets Counter64,
    sapIgQosPlcyQueueStatsForwardedOutProfOctets Counter64,
    sapIgQosPlcyQueueCustId          TmnxCustId,
    sapIgQosPlcyQueueStatsUncoloredPacketsOffered Counter64,
    sapIgQosPlcyQueueStatsUncoloredOctetsOffered Counter64
}

sapIgQosPlcyQueuePlcyId          OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyQueuePlcyId indicates the row
         index in the tSapIngressTable corresponding to this ingress QoS
         policy."
    ::= { sapIngQosPlcyQueueStatsEntry 1 }

sapIgQosPlcyQueueId              OBJECT-TYPE
    SYNTAX      TSapIngQueueId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The index of the ingress QoS queue of this SAP used by the policy
         indicated by sapIgQosPlcyQueuePlcyId."
    ::= { sapIngQosPlcyQueueStatsEntry 2 }

sapIgQosPlcyQueueStatsOfferedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets indicates the
         number of high priority packets, as determined by the SAP ingress QoS
         policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 3 }

sapIgQosPlcyQueueStatsDroppedHiPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets indicates the
         number of high priority packets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngQosPlcyQueueStatsEntry 4 }

sapIgQosPlcyQueueStatsOfferedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets
         indicates the number of  low priority packets,
         as determined by the SAP ingress QoS policy, offered by
         the Pchip to the Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 5 }

sapIgQosPlcyQueueStatsDroppedLoPrioPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets indicates the
         number of low priority packets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngQosPlcyQueueStatsEntry 6 }

sapIgQosPlcyQueueStatsOfferedHiPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets indicates the
         number of high priority octets, as determined by the SAP ingress QoS
         policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 7 }

sapIgQosPlcyQueueStatsDroppedHiPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets indicates the
         number of high priority octets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngQosPlcyQueueStatsEntry 8 }

sapIgQosPlcyQueueStatsOfferedLoPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets indicates the
         number of low priority octets, as determined by the SAP ingress QoS
         policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 9 }

sapIgQosPlcyQueueStatsDroppedLoPrioOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets indicates the
         number of low priority octets, as determined by the SAP ingress QoS
         policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
         exceeded, etc."
    ::= { sapIngQosPlcyQueueStatsEntry 10 }

sapIgQosPlcyQueueStatsForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsForwardedInProfPackets indicates
         the number of in-profile packets (rate below CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 11 }

sapIgQosPlcyQueueStatsForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsForwardedOutProfPackets indicates
         the number of out-of-profile packets (rate above CIR) forwarded by the
         ingress Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 12 }

sapIgQosPlcyQueueStatsForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsForwardedInProfOctets indicates the
         number of in-profile octets (rate below CIR) forwarded by the ingress
         Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 13 }

sapIgQosPlcyQueueStatsForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsForwardedOutProfOctets
         indicates the number of  out-of-profile octets
         (rate above CIR) forwarded by the ingress Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 14 }

sapIgQosPlcyQueueCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyQueueCustId indicates the Customer
         ID for the associated service."
    ::= { sapIngQosPlcyQueueStatsEntry 15 }

sapIgQosPlcyQueueStatsUncoloredPacketsOffered OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered indicates
         the number of uncolored packets offered to the ingress Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 16 }

sapIgQosPlcyQueueStatsUncoloredOctetsOffered OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered indicates
         the number of uncolored octets offered to the ingress Qchip."
    ::= { sapIngQosPlcyQueueStatsEntry 17 }

sapEgrQosPlcyQueueStatsTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosPlcyQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains egress QoS queue SAP statistics per Egress QoS
         Policy the queue was used by.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 30 }

sapEgrQosPlcyQueueStatsEntry     OBJECT-TYPE
    SYNTAX      SapEgrQosPlcyQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS queue for a given Qos
         policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgQosPlcyQueuePlcyId,
        sapEgQosPlcyQueueId
    }
    ::= { sapEgrQosPlcyQueueStatsTable 1 }

SapEgrQosPlcyQueueStatsEntry     ::= SEQUENCE
{
    sapEgQosPlcyQueuePlcyId          TSapEgressPolicyID,
    sapEgQosPlcyQueueId              TSapEgrQueueId,
    sapEgQosPlcyQueueStatsForwardedInProfPackets Counter64,
    sapEgQosPlcyQueueStatsDroppedInProfPackets Counter64,
    sapEgQosPlcyQueueStatsForwardedOutProfPackets Counter64,
    sapEgQosPlcyQueueStatsDroppedOutProfPackets Counter64,
    sapEgQosPlcyQueueStatsForwardedInProfOctets Counter64,
    sapEgQosPlcyQueueStatsDroppedInProfOctets Counter64,
    sapEgQosPlcyQueueStatsForwardedOutProfOctets Counter64,
    sapEgQosPlcyQueueStatsDroppedOutProfOctets Counter64,
    sapEgQosPlcyQueueCustId          TmnxCustId
}

sapEgQosPlcyQueuePlcyId          OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The row index in the tSapEgressTable corresponding to this egress QoS
         policy."
    ::= { sapEgrQosPlcyQueueStatsEntry 1 }

sapEgQosPlcyQueueId              OBJECT-TYPE
    SYNTAX      TSapEgrQueueId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueId indicates index of the egress QoS
         queue of this SAP."
    ::= { sapEgrQosPlcyQueueStatsEntry 2 }

sapEgQosPlcyQueueStatsForwardedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsForwardedInProfPackets indicates
         the number of in-profile packets (rate below CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyQueueStatsEntry 3 }

sapEgQosPlcyQueueStatsDroppedInProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsDroppedInProfPackets indicates the
         number of in-profile packets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyQueueStatsEntry 4 }

sapEgQosPlcyQueueStatsForwardedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsForwardedOutProfPackets indicates
         the number of out-of-profile packets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyQueueStatsEntry 5 }

sapEgQosPlcyQueueStatsDroppedOutProfPackets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsDroppedOutProfPackets indicates the
         number out-of-profile packets discarded by the egress Qchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyQueueStatsEntry 6 }

sapEgQosPlcyQueueStatsForwardedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsForwardedInProfOctets indicates the
         number of in-profile octets (rate below CIR) forwarded by the egress
         Qchip."
    ::= { sapEgrQosPlcyQueueStatsEntry 7 }

sapEgQosPlcyQueueStatsDroppedInProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsDroppedInProfOctets indicates the
         number in-profile octets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyQueueStatsEntry 8 }

sapEgQosPlcyQueueStatsForwardedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsForwardedOutProfOctets indicates
         the number of out-of-profile octets (rate above CIR) forwarded by the
         egress Qchip."
    ::= { sapEgrQosPlcyQueueStatsEntry 9 }

sapEgQosPlcyQueueStatsDroppedOutProfOctets OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyQueueStatsDroppedOutProfOctets indicates the
         number out-of-profile octets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyQueueStatsEntry 10 }

sapEgQosPlcyQueueCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyQueueCustId indicates the Customer
         ID for the associated service."
    ::= { sapEgrQosPlcyQueueStatsEntry 11 }

sapDhcpInfoTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapDhcpInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapDhcpInfoTable contains DHCP information related to a
         routed CO subscriber SAP.  This table complements
         sapBaseInfoTable, and contains an entry for each
         routed CO subscriber SAP. Rows in this table
         are created and deleted automatically by the system."
    ::= { tmnxSapObjs 31 }

sapDhcpInfoEntry                 OBJECT-TYPE
    SYNTAX      SapDhcpInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP specific information for a routed CO subscriber SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapDhcpInfoTable 1 }

SapDhcpInfoEntry                 ::= SEQUENCE
{ sapDhcpOperLeasePopulate         Unsigned32 }

sapDhcpOperLeasePopulate         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapDhcpOperLeasePopulate indicates the number
         of DHCP lease states currently allocated on this SAP."
    ::= { sapDhcpInfoEntry 1 }

sapIngSchedPlcyStatsTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngSchedPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains ingress QoS queue statistics for the SAPs,
         organized by scheduler policy.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 32 }

sapIngSchedPlcyStatsEntry        OBJECT-TYPE
    SYNTAX      SapIngSchedPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics about a specific SAP's ingress Qos Scheduler. Entries are
         created when a scheduler policy of a SAP is replaced with another one
         due to Time-Of-Day policies."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tSchedulerPolicyName,
        IMPLIED sapIngQosSchedName
    }
    ::= { sapIngSchedPlcyStatsTable 1 }

SapIngSchedPlcyStatsEntry        ::= SEQUENCE
{
    sapIngSchedPlcyStatsFwdPkt       Counter64,
    sapIngSchedPlcyStatsFwdOct       Counter64
}

sapIngSchedPlcyStatsFwdPkt       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The number of forwarded packets, as determined by the SAP ingress
         scheduler policy, offered by the Pchip to the Qchip."
    ::= { sapIngSchedPlcyStatsEntry 1 }

sapIngSchedPlcyStatsFwdOct       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The number of forwarded octets, as determined by the SAP ingress
         scheduler policy, offered by the Pchip to the Qchip."
    ::= { sapIngSchedPlcyStatsEntry 2 }

sapEgrSchedPlcyStatsTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrSchedPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains egress QoS scheduler statistics for the SAPs,
         organized by scheduler policy.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 33 }

sapEgrSchedPlcyStatsEntry        OBJECT-TYPE
    SYNTAX      SapEgrSchedPlcyStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics about a specific SAP's egress QoS scheduler. Entries are
         created when a scheduler policy of a SAP is replaced with another one
         due to Time-Of-Day policies."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tSchedulerPolicyName,
        IMPLIED sapEgrQosSchedName
    }
    ::= { sapEgrSchedPlcyStatsTable 1 }

SapEgrSchedPlcyStatsEntry        ::= SEQUENCE
{
    sapEgrSchedPlcyStatsFwdPkt       Counter64,
    sapEgrSchedPlcyStatsFwdOct       Counter64
}

sapEgrSchedPlcyStatsFwdPkt       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The number of packets forwarded by the egress Qchip, as determined by
         the SAP egress scheduler policy."
    ::= { sapEgrSchedPlcyStatsEntry 1 }

sapEgrSchedPlcyStatsFwdOct       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The number of octets forwarded by the egress Qchip, as determined by
         the SAP egress scheduler policy."
    ::= { sapEgrSchedPlcyStatsEntry 2 }

sapIngSchedPlcyPortStatsTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngSchedPlcyPortStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The sapIngSchedPlcyPortStatsTable contains
         ingress QoS scheduler statistics for the SAPs, organized per
         scheduler policy and per port. This table is used when the SAP
         is  a CCAG or LAG in 'link' mode, or an APS.
         Entries are created when a scheduler policy of a SAP
         is replaced with another one due to Time-Of-Day policies.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 34 }

sapIngSchedPlcyPortStatsEntry    OBJECT-TYPE
    SYNTAX      SapIngSchedPlcyPortStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics about a specific SAP's ingress Qos Scheduler. Entries are
         created when a scheduler policy of a SAP is replaced with another one
         due to Time-Of-Day policies."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tSchedulerPolicyName,
        tVirtualSchedulerName,
        sapPortIdIngPortId
    }
    ::= { sapIngSchedPlcyPortStatsTable 1 }

SapIngSchedPlcyPortStatsEntry    ::= SEQUENCE
{
    sapIngSchedPlcyPortStatsPort     TmnxPortID,
    sapIngSchedPlcyPortStatsFwdPkt   Counter64,
    sapIngSchedPlcyPortStatsFwdOct   Counter64
}

sapIngSchedPlcyPortStatsPort     OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngSchedPlcyPortStatsPort is used as an index of the
         ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in
         'link' mode, this object is the TmnxPortID of the member-port on which
         the scheduler is applied."
    ::= { sapIngSchedPlcyPortStatsEntry 1 }

sapIngSchedPlcyPortStatsFwdPkt   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngSchedPlcyPortStatsFwdPkt indicates the number of
         forwarded packets, as determined by the SAP ingress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapIngSchedPlcyPortStatsEntry 2 }

sapIngSchedPlcyPortStatsFwdOct   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngSchedPlcyPortStatsFwdOct indicates the number of
         forwarded octets,as determined by the SAP ingress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapIngSchedPlcyPortStatsEntry 3 }

sapEgrSchedPlcyPortStatsTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrSchedPlcyPortStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The sapEgrSchedPlcyPortStatsTable contains
         egress QoS scheduler statistics for the SAPs, organized per
         scheduler policy and per port. This table is used when the SAP
         is  a CCAG or LAG in 'link' mode, or an APS.
         Entries are created when a scheduler policy of a SAP
         is replaced with another one due to Time-Of-Day policies.

         Conceptual rows in this table are automatically created by the system.

         No row will be created for a SAP if the value of the object
         sapTodSuite is equal to the empty string.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 35 }

sapEgrSchedPlcyPortStatsEntry    OBJECT-TYPE
    SYNTAX      SapEgrSchedPlcyPortStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics about a specific SAP's egress Qos Scheduler. Entries are
         created when a scheduler policy of a SAP is replaced with another one
         due to Time-Of-Day policies."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tSchedulerPolicyName,
        tVirtualSchedulerName,
        sapPortIdEgrPortId
    }
    ::= { sapEgrSchedPlcyPortStatsTable 1 }

SapEgrSchedPlcyPortStatsEntry    ::= SEQUENCE
{
    sapEgrSchedPlcyPortStatsPort     TmnxPortID,
    sapEgrSchedPlcyPortStatsFwdPkt   Counter64,
    sapEgrSchedPlcyPortStatsFwdOct   Counter64
}

sapEgrSchedPlcyPortStatsPort     OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrSchedPlcyPortStatsPort is used as an index of the
         egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in
         'link' mode, this object is the TmnxPortID of the member-port on which
         the scheduler is applied."
    ::= { sapEgrSchedPlcyPortStatsEntry 1 }

sapEgrSchedPlcyPortStatsFwdPkt   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrSchedPlcyPortStatsFwdPkt indicates the number of
         forwarded packets, as determined by the SAP egress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapEgrSchedPlcyPortStatsEntry 2 }

sapEgrSchedPlcyPortStatsFwdOct   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrSchedPlcyPortStatsFwdOct indicates the number of
         forwarded octets,as determined by the SAP egress scheduler policy,
         offered by the Pchip to the Qchip."
    ::= { sapEgrSchedPlcyPortStatsEntry 3 }

sapCemInfoTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapCemInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains CEM SAP information."
    ::= { tmnxSapObjs 40 }

sapCemInfoEntry                  OBJECT-TYPE
    SYNTAX      SapCemInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific CEM SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapCemInfoTable 1 }

SapCemInfoEntry                  ::= SEQUENCE
{
    sapCemLastMgmtChange             TimeStamp,
    sapCemEndpointType               INTEGER,
    sapCemBitrate                    Unsigned32,
    sapCemCasTrunkFraming            TdmOptionsCasTrunkFraming,
    sapCemPayloadSize                Unsigned32,
    sapCemJitterBuffer               Unsigned32,
    sapCemUseRtpHeader               TruthValue,
    sapCemDifferential               TruthValue,
    sapCemTimestampFreq              Unsigned32,
    sapCemReportAlarm                CemSapReportAlarm,
    sapCemReportAlarmStatus          CemSapReportAlarm,
    sapCemLocalEcid                  CemSapEcid,
    sapCemRemoteMacAddr              MacAddress,
    sapCemRemoteEcid                 CemSapEcid,
    sapCemJitterBufPackets           Unsigned32,
    sapCemPlayoutBufPacketsThreshold Unsigned32
}

sapCemLastMgmtChange             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapCemLastMgmtChange indicates the value of
         sysUpTime at the time of the most recent management-initiated change
         to this CEM SAP information."
    ::= { sapCemInfoEntry 1 }

sapCemEndpointType               OBJECT-TYPE
    SYNTAX      INTEGER {
        unstructuredE1 (1),
        unstructuredT1 (2),
        unstructuredE3 (3),
        unstructuredT3 (4),
        nxDS0          (5),
        nxDS0WithCas   (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the CEM SAP endpoint type."
    ::= { sapCemInfoEntry 2 }

sapCemBitrate                    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..699)
    UNITS       "sixty-four kilobps"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the bit-rate in multiples of 64 Kbit/s of the
         CEM SAP."
    ::= { sapCemInfoEntry 3 }

sapCemCasTrunkFraming            OBJECT-TYPE
    SYNTAX      TdmOptionsCasTrunkFraming
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the CAS trunk framing mode of the CEM SAP."
    ::= { sapCemInfoEntry 4 }

sapCemPayloadSize                OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 16..2048)
    UNITS       "bytes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the payload size (in bytes) of
         packets transmitted to the Packet Service Network (PSN)
         by the CEM SAP.  This determines the size of the data
         that will be transmitted over the service.  As well,
         if the size of the data received is not consistent with
         the payload size then the packet is considered malformed.

         The default value depends on the CEM SAP endpoint type
         (sapCemEndpointType), and if applicable, the number of
         timeslots (sapCemBitrate):
         ---------------------------------------------------------
         | Endpoint Type      | Timeslots | Default payload size |
         ---------------------+-----------+-----------------------
         | 'unstructuredE1'   | n/a       |    256 bytes         |
         ---------------------+-----------+-----------------------
         | 'unstructuredT1'   | n/a       |    192 bytes         |
         ---------------------+-----------+-----------------------
         | 'unstructuredE3'   | n/a       |   1024 bytes         |
         ---------------------+-----------+-----------------------
         | 'unstructuredT3'   | n/a       |   1024 bytes         |
         ---------------------+-----------+-----------------------
         | 'nxDS0' (E1/T1)    | N = 1     |     64 bytes         |
         |                    +-----------+-----------------------
         |                    | N = 2..4  | N x 32 bytes         |
         |                    +-----------+-----------------------
         |                    | N = 5..15 | N x 16 bytes         |
         |                    +-----------+-----------------------
         |                    | N >= 16   | N x  8 bytes         |
         ---------------------+-----------+-----------------------
         | 'nxDS0WithCas' (E1)| N         | N x 16 bytes         |
         ---------------------+-----------+-----------------------
         | 'nxDS0WithCas' (T1)| N         | N x 24 bytes         |
         ---------------------------------------------------------

         For 'nxDS0WithCas', the sapCemPayloadSize cannot be changed away from
         the default value.

         For '1xDS0', sapCemPayloadSize must be a multiple of 2.

         For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the
         number of timeslots (sapCemBitrate).

         For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and
         'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes.

         Configuring sapCemPayloadSize and sapCemJitterBuffer to values that
         result in less than 2 packet buffers or greater than 32 packet buffers
         is not allowed.

         For all endpoint types except for 'nxDS0WithCas', the
         minimum payload size is given below:
         ---------------------------------------------------------
         | Endpoint Type      | Timeslots | Minimum payload size |
         ---------------------+-----------+-----------------------
         | 'unstructuredE1'   | n/a       |    256 bytes         |
         ---------------------+-----------+-----------------------
         | 'unstructuredT1'   | n/a       |    192 bytes         |
         ---------------------+-----------+-----------------------
         | 'unstructuredE3'   | n/a       |   1024 bytes         |
         ---------------------+-----------+-----------------------
         | 'unstructuredT3'   | n/a       |   1024 bytes         |
         ---------------------+-----------+-----------------------
         | 'nxDS0' (E1)       | N = 1..4  | N x 16 bytes         |
         ---------------------+-----------+-----------------------
         | 'nxDS0' (T1)       | N = 1..4  | N x 24 bytes         |
         ---------------------+-----------+-----------------------
         | 'nxDS0' (E1/T1)    | N = 5..15 | N x 16 bytes         |
         |                    +-----------+-----------------------
         |                    | N >= 16   | N x  8 bytes         |
         ---------------------+-----------+-----------------------

         For all endpoints types except for 'nxDS0WithCas', the maximum payload
         size is 2048 bytes.

         Setting this object to 0 sets it back to the default value."
    ::= { sapCemInfoEntry 5 }

sapCemJitterBuffer               OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..250)
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the jitter buffer size in milliseconds (ms).

         Default value depends on the CEM SAP endpoint type
         (sapCemEndpointType), and if applicable, the number of
         timeslots (sapCemBitrate):
         ---------------------------------------------------------
         | Endpoint Type      | Timeslots | Default jitter buf.  |
         ---------------------+-----------+-----------------------
         | 'unstructuredE1'   | n/a       |    5 ms              |
         ---------------------+-----------+-----------------------
         | 'unstructuredT1'   | n/a       |    5 ms              |
         ---------------------+-----------+-----------------------
         | 'unstructuredE3'   | n/a       |    5 ms              |
         ---------------------+-----------+-----------------------
         | 'unstructuredT3'   | n/a       |    5 ms              |
         ---------------------+-----------+-----------------------
         | 'nxDS0' (E1/T1)    | N = 1     |   32 ms              |
         |                    +-----------+-----------------------
         |                    | N = 2..4  |   16 ms              |
         |                    +-----------+-----------------------
         |                    | N = 5..15 |    8 ms              |
         |                    +-----------+-----------------------
         |                    | N >= 16   |    5 ms              |
         ---------------------+-----------+-----------------------
         | 'nxDS0WithCas' (E1)| N         |    8 ms              |
         ---------------------+-----------+-----------------------
         | 'nxDS0WithCas' (T1)| N         |   12 ms              |
         ---------------------------------------------------------

         Configuring sapCemPayloadSize and sapCemJitterBuffer to values that
         result in less than 2 packet buffers or greater than 32 packet buffers
         is not allowed.

         The valid range is 1 to 250 ms.  Setting this object
         to 0 sets it back to the default value."
    ::= { sapCemInfoEntry 6 }

sapCemUseRtpHeader               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies whether a RTP header is used when packets are
         transmitted to the Packet Service Network (PSN) by the CEM SAP."
    DEFVAL      { false }
    ::= { sapCemInfoEntry 7 }

sapCemDifferential               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether this CEM SAP is in differential mode."
    ::= { sapCemInfoEntry 8 }

sapCemTimestampFreq              OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "8 KHz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the value of the differential timestamp
         frequency in multiples of 8 KHz for this CEM SAP."
    REFERENCE
        "RFC 5287, section 3.8 'TDM Options'."
    ::= { sapCemInfoEntry 9 }

sapCemReportAlarm                OBJECT-TYPE
    SYNTAX      CemSapReportAlarm
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapCemReportAlarm determines when and if to generate
         notifications for the CEM SAP."
    DEFVAL      { {strayPkts, malformedPkts, pktLoss, bfrOverrun, bfrUnderrun} }
    ::= { sapCemInfoEntry 10 }

sapCemReportAlarmStatus          OBJECT-TYPE
    SYNTAX      CemSapReportAlarm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemReportAlarmStatus indicates the current alarms on
         this CEM SAP."
    ::= { sapCemInfoEntry 11 }

sapCemLocalEcid                  OBJECT-TYPE
    SYNTAX      CemSapEcid
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapCemLocalEcid specifies the local ECID.

         Only valid if CEM SAP belongs to an EPIPE service."
    DEFVAL      { 0 }
    ::= { sapCemInfoEntry 12 }

sapCemRemoteMacAddr              OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapCemRemoteMacAddr specifies the remote MAC
         address.

         Only valid if CEM SAP belongs to an EPIPE service."
    DEFVAL      { '000000000000'H }
    ::= { sapCemInfoEntry 13 }

sapCemRemoteEcid                 OBJECT-TYPE
    SYNTAX      CemSapEcid
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapCemRemoteEcid specifies the remote ECID.

         Only valid if CEM SAP belongs to an EPIPE service."
    DEFVAL      { 0 }
    ::= { sapCemInfoEntry 14 }

sapCemJitterBufPackets           OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value indicates the jitter buffer length in number of packet
         buffers."
    ::= { sapCemInfoEntry 15 }

sapCemPlayoutBufPacketsThreshold OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "packets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This value indicates the playout buffer packets threshold in number of
         packet buffers."
    ::= { sapCemInfoEntry 16 }

sapCemStatsTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapCemStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains CEM SAP statistics."
    ::= { tmnxSapObjs 41 }

sapCemStatsEntry                 OBJECT-TYPE
    SYNTAX      SapCemStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Statistics for a specific CEM SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapCemStatsTable 1 }

SapCemStatsEntry                 ::= SEQUENCE
{
    sapCemStatsIngressForwardedPkts  Counter32,
    sapCemStatsIngressDroppedPkts    Counter32,
    sapCemStatsEgressForwardedPkts   Counter32,
    sapCemStatsEgressDroppedPkts     Counter32,
    sapCemStatsEgressMissingPkts     Counter32,
    sapCemStatsEgressPktsReOrder     Counter32,
    sapCemStatsEgressJtrBfrUnderruns Counter32,
    sapCemStatsEgressJtrBfrOverruns  Counter32,
    sapCemStatsEgressMisOrderDropped Counter32,
    sapCemStatsEgressMalformedPkts   Counter32,
    sapCemStatsEgressLBitDropped     Counter32,
    sapCemStatsEgressMultipleDropped Counter32,
    sapCemStatsEgressESs             Counter32,
    sapCemStatsEgressSESs            Counter32,
    sapCemStatsEgressUASs            Counter32,
    sapCemStatsEgressFailureCounts   Counter32,
    sapCemStatsEgressUnderrunCounts  Counter32,
    sapCemStatsEgressOverrunCounts   Counter32,
    sapCemStatsEgressJtrBfrDepth     Gauge32
}

sapCemStatsIngressForwardedPkts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsIngressForwardedPkts indicates the number of
         packets that were successfully forwarded."
    ::= { sapCemStatsEntry 1 }

sapCemStatsIngressDroppedPkts    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsIngressDroppedPkts indicates the total number
         of packets that were dropped due to errors."
    ::= { sapCemStatsEntry 2 }

sapCemStatsEgressForwardedPkts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressForwardedPkts indicates the number of
         packets that were successfully forwarded."
    ::= { sapCemStatsEntry 3 }

sapCemStatsEgressDroppedPkts     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressDroppedPkts indicates the total number
         of packets that were dropped due to errors."
    ::= { sapCemStatsEntry 4 }

sapCemStatsEgressMissingPkts     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressMissingPkts indicates the number of
         missing packets (as detected via control word sequence number gaps)."
    ::= { sapCemStatsEntry 5 }

sapCemStatsEgressPktsReOrder     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressPktsReOrder indicates the number of
         packets detected out of sequence (via control word sequence number),
         but successfully re-ordered."
    ::= { sapCemStatsEntry 6 }

sapCemStatsEgressJtrBfrUnderruns OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressJtrBfrUnderruns indicates the number of
         times a packet needed to be played out and the jitter buffer was
         empty."
    ::= { sapCemStatsEntry 7 }

sapCemStatsEgressJtrBfrOverruns  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressJtrBfrOverruns indicates the number of
         times a packet was dropped because it could not fit in the jitter
         buffer."
    ::= { sapCemStatsEntry 8 }

sapCemStatsEgressMisOrderDropped OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressMisOrderDropped indicates the number of
         packets detected out of order (via control word sequence numbers), and
         could not be re-ordered, or could not be placed in the jitter buffer
         because it was out of the current window."
    ::= { sapCemStatsEntry 9 }

sapCemStatsEgressMalformedPkts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressMalformedPkts indicates the number of
         packets detected with unexpected size, or bad headers' stack."
    ::= { sapCemStatsEntry 10 }

sapCemStatsEgressLBitDropped     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressLBitDropped indicates the number of
         packets dropped due to the L bit set by the far end."
    ::= { sapCemStatsEntry 11 }

sapCemStatsEgressMultipleDropped OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressMultipleDropped indicates the number of
         packets dropped due to multiple sequence numbers."
    ::= { sapCemStatsEntry 12 }

sapCemStatsEgressESs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressESs indicates the number of
         Error Seconds (ESs) encountered. Any malformed packet,
         seq.  error, LOPS and similar are considered as error
         seconds."
    ::= { sapCemStatsEntry 13 }

sapCemStatsEgressSESs            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressSESs indicates the number
         of Severely Error Seconds (SESs) encountered.  This is
         when more than 30 percent of the packets within a one
         second window are missing."
    ::= { sapCemStatsEntry 14 }

sapCemStatsEgressUASs            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressUASs indicates the number of Unavailable
         Seconds (UASs) encountered. Any consecutive ten seconds of SESs are
         counted as one UAS."
    ::= { sapCemStatsEntry 15 }

sapCemStatsEgressFailureCounts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressFailureCounts indicates
         the number failure events.  A failure event begins when
         the LOPS failure is declared, and ends when the failure
         is cleared."
    ::= { sapCemStatsEntry 16 }

sapCemStatsEgressUnderrunCounts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressUnderrunCounts indicates the number of
         times the jitter buffer went into an underrun state."
    ::= { sapCemStatsEntry 17 }

sapCemStatsEgressOverrunCounts   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressOverrunCounts indicates the number of
         times the jitter buffer went into an overrun state."
    ::= { sapCemStatsEntry 18 }

sapCemStatsEgressJtrBfrDepth     OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapCemStatsEgressJtrBfrDepth indicates the current packet
         depth of the jitter buffer."
    ::= { sapCemStatsEntry 19 }

sapTlsL2ptStatsTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsL2ptStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP Layer 2 Protocol Tunneling Statistics. This
         table complements sapTlsInfoTable. Rows in this table are created and
         deleted automatically by the system."
    ::= { tmnxSapObjs 42 }

sapTlsL2ptStatsEntry             OBJECT-TYPE
    SYNTAX      SapTlsL2ptStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Layer 2 Protocol Tunneling Statistics for a specific SAP. The
         statistics are provided for each combination of Destination Address
         and LLC SNAP type."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsL2ptStatsTable 1 }

SapTlsL2ptStatsEntry             ::= SEQUENCE
{
    sapTlsL2ptStatsLastClearedTime   TimeStamp,
    sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32,
    sapTlsL2ptStatsStpConfigBpdusRx  Counter32,
    sapTlsL2ptStatsStpConfigBpdusTx  Counter32,
    sapTlsL2ptStatsStpRstBpdusRx     Counter32,
    sapTlsL2ptStatsStpRstBpdusTx     Counter32,
    sapTlsL2ptStatsStpTcnBpdusRx     Counter32,
    sapTlsL2ptStatsStpTcnBpdusTx     Counter32,
    sapTlsL2ptStatsPvstConfigBpdusRx Counter32,
    sapTlsL2ptStatsPvstConfigBpdusTx Counter32,
    sapTlsL2ptStatsPvstRstBpdusRx    Counter32,
    sapTlsL2ptStatsPvstRstBpdusTx    Counter32,
    sapTlsL2ptStatsPvstTcnBpdusRx    Counter32,
    sapTlsL2ptStatsPvstTcnBpdusTx    Counter32,
    sapTlsL2ptStatsOtherBpdusRx      Counter32,
    sapTlsL2ptStatsOtherBpdusTx      Counter32,
    sapTlsL2ptStatsOtherL2ptBpdusRx  Counter32,
    sapTlsL2ptStatsOtherL2ptBpdusTx  Counter32,
    sapTlsL2ptStatsOtherInvalidBpdusRx Counter32,
    sapTlsL2ptStatsOtherInvalidBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32,
    sapTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32,
    sapTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32,
    sapTlsL2ptStatsCdpBpdusRx        Counter32,
    sapTlsL2ptStatsCdpBpdusTx        Counter32,
    sapTlsL2ptStatsVtpBpdusRx        Counter32,
    sapTlsL2ptStatsVtpBpdusTx        Counter32,
    sapTlsL2ptStatsDtpBpdusRx        Counter32,
    sapTlsL2ptStatsDtpBpdusTx        Counter32,
    sapTlsL2ptStatsPagpBpdusRx       Counter32,
    sapTlsL2ptStatsPagpBpdusTx       Counter32,
    sapTlsL2ptStatsUdldBpdusRx       Counter32,
    sapTlsL2ptStatsUdldBpdusTx       Counter32
}

sapTlsL2ptStatsLastClearedTime   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsLastClearedTime indicates the last time
         that these stats were cleared. The value zero indicates that they have
         not been cleared yet."
    ::= { sapTlsL2ptStatsEntry 1 }

sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the
         number of L2PT encapsulated STP config bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 2 }

sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the
         number of L2PT encapsulated STP config bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 3 }

sapTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
         number of L2PT encapsulated STP rst bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 4 }

sapTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
         number of L2PT encapsulated STP rst bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 5 }

sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
         number of L2PT encapsulated STP tcn bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 6 }

sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
         number of L2PT encapsulated STP tcn bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 7 }

sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the
         number of L2PT encapsulated PVST config bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 8 }

sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the
         number of L2PT encapsulated PVST config bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 9 }

sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
         number of L2PT encapsulated PVST rst bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 10 }

sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
         number of L2PT encapsulated PVST rst bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 11 }

sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
         number of L2PT encapsulated PVST tcn bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 12 }

sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
         number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 13 }

sapTlsL2ptStatsStpConfigBpdusRx  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsStpConfigBpdusRx indicates the number of
         STP config bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 14 }

sapTlsL2ptStatsStpConfigBpdusTx  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsStpConfigBpdusTx indicates the number of
         STP config bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 15 }

sapTlsL2ptStatsStpRstBpdusRx     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsStpRstBpdusRx indicates the number of STP
         rst bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 16 }

sapTlsL2ptStatsStpRstBpdusTx     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsStpRstBpdusTx indicates the number of STP
         rst bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 17 }

sapTlsL2ptStatsStpTcnBpdusRx     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsStpTcnBpdusRx indicates the number of STP
         tcn bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 18 }

sapTlsL2ptStatsStpTcnBpdusTx     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsStpTcnBpdusTx indicates the number of STP
         tcn bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 19 }

sapTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the number of
         PVST config bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 20 }

sapTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the number of
         PVST config bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 21 }

sapTlsL2ptStatsPvstRstBpdusRx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPvstRstBpdusRx indicates the number of
         PVST rst bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 22 }

sapTlsL2ptStatsPvstRstBpdusTx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPvstRstBpdusTx indicates the number of
         PVST rst bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 23 }

sapTlsL2ptStatsPvstTcnBpdusRx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the number of
         PVST tcn bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 24 }

sapTlsL2ptStatsPvstTcnBpdusTx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the number of
         PVST tcn bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 25 }

sapTlsL2ptStatsOtherBpdusRx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsOtherBpdusRx indicates the number of other
         bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 26 }

sapTlsL2ptStatsOtherBpdusTx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsOtherBpdusTx indicates the number of other
         bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 27 }

sapTlsL2ptStatsOtherL2ptBpdusRx  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the number of
         other L2PT bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 28 }

sapTlsL2ptStatsOtherL2ptBpdusTx  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the number of
         other L2PT bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 29 }

sapTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the number
         of other invalid bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 30 }

sapTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the number
         of other invalid bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 31 }

sapTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number
         of L2PT encapsulated CDP bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 32 }

sapTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number
         of L2PT encapsulated CDP bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 33 }

sapTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number
         of L2PT encapsulated VTP bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 34 }

sapTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number
         of L2PT encapsulated VTP bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 35 }

sapTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number
         of L2PT encapsulated DTP bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 36 }

sapTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number
         of L2PT encapsulated DTP bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 37 }

sapTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number
         of L2PT encapsulated PAGP bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 38 }

sapTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number
         of L2PT encapsulated PAGP bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 39 }

sapTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number
         of L2PT encapsulated UDLD bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 40 }

sapTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number
         of L2PT encapsulated UDLD bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 41 }

sapTlsL2ptStatsCdpBpdusRx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsCdpBpdusRx indicates the number of CDP
         bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 42 }

sapTlsL2ptStatsCdpBpdusTx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsCdpBpdusTx indicates the number of CDP
         bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 43 }

sapTlsL2ptStatsVtpBpdusRx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsVtpBpdusRx indicates the number of VTP
         bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 44 }

sapTlsL2ptStatsVtpBpdusTx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsVtpBpdusTx indicates the number of VTP
         bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 45 }

sapTlsL2ptStatsDtpBpdusRx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsDtpBpdusRx indicates the number of DTP
         bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 46 }

sapTlsL2ptStatsDtpBpdusTx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsDtpBpdusTx indicates the number of DTP
         bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 47 }

sapTlsL2ptStatsPagpBpdusRx       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPagpBpdusRx indicates the number of PAGP
         bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 48 }

sapTlsL2ptStatsPagpBpdusTx       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsPagpBpdusTx indicates the number of PAGP
         bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 49 }

sapTlsL2ptStatsUdldBpdusRx       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsUdldBpdusRx indicates the number of UDLD
         bpdus received on this SAP."
    ::= { sapTlsL2ptStatsEntry 50 }

sapTlsL2ptStatsUdldBpdusTx       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsL2ptStatsUdldBpdusTx indicates the number of UDLD
         bpdus transmitted on this SAP."
    ::= { sapTlsL2ptStatsEntry 51 }

sapEthernetInfoTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEthernetInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains Ethernet SAP information."
    ::= { tmnxSapObjs 43 }

sapEthernetInfoEntry             OBJECT-TYPE
    SYNTAX      SapEthernetInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific Ethernet SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapEthernetInfoTable 1 }

SapEthernetInfoEntry             ::= SEQUENCE
{
    sapEthernetLLFAdminStatus        ServiceAdminStatus,
    sapEthernetLLFOperStatus         INTEGER
}

sapEthernetLLFAdminStatus        OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapEthernetLLFAdminStatus specifies whether or not Link- Loss
         Forwarding is enabled ('up'). When this object is set to 'up' the
         underlying port will be forced into the operationally 'down' state if
         the service is operationally 'down', or any of the
         'sdpBindPwPeerStatusBits' are set, and will set the underlying port's
         tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting this object to
         'down' will clear the 'linklossFwd' reason. sapEthernetLLFAdminStatus
         can only be enabled on saps configured for an EPIPE service using an
         Ethernet port with the tmnxPortEncapType set to 'nullEncap.'"
    DEFVAL      { down }
    ::= { sapEthernetInfoEntry 1 }

sapEthernetLLFOperStatus         OBJECT-TYPE
    SYNTAX      INTEGER {
        fault (1),
        clear (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEthernetLLFOperStatus indicates whether or not the underlying port
         is forced operationally 'down' due to the service being operationally
         'down' or an sdpBindPwPeerStatusBits bit is set.
         sapEthernetLLFOperStatus is set to 'fault' when the
         sapEthernetLLFAdminStatus is set to 'up,' and either a fault has
         occurred on the pseudo-wire, or the service is down, otherwise
         sapEthernetLLFOperStatus is set to 'clear.'"
    ::= { sapEthernetInfoEntry 2 }

msapPlcyTable                    OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The msapPlcyTable has an entry for each managed SAP(MSAP) policy
         configured in the system."
    ::= { tmnxSapObjs 44 }

msapPlcyEntry                    OBJECT-TYPE
    SYNTAX      MsapPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for a managed SAP(MSAP)
         policy.

         The values for each entry will be used to populate the following
         tables when the MSAP policy is applied to a MSAP:

         TIMETRA-SAP-MIB::sapBaseInfoTable TIMETRA-SAP-MIB::sapSubMgmtInfoTable"
    INDEX       { msapPlcyName }
    ::= { msapPlcyTable 1 }

MsapPlcyEntry                    ::= SEQUENCE
{
    msapPlcyName                     TNamedItem,
    msapPlcyRowStatus                RowStatus,
    msapPlcyLastChanged              TimeStamp,
    msapPlcyDescription              TItemDescription,
    msapPlcyCpmProtPolicyId          TCpmProtPolicyID,
    msapPlcyCpmProtMonitorMac        TruthValue,
    msapPlcySubMgmtDefSubId          TmnxDefSubIdSource,
    msapPlcySubMgmtDefSubIdStr       TLNamedItemOrEmpty,
    msapPlcySubMgmtDefSubProfile     TNamedItemOrEmpty,
    msapPlcySubMgmtDefSlaProfile     TNamedItemOrEmpty,
    msapPlcySubMgmtDefAppProfile     TNamedItemOrEmpty,
    msapPlcySubMgmtSubIdPlcy         TPolicyStatementNameOrEmpty,
    msapPlcySubMgmtSubscriberLimit   TmnxSapSubscriberLimit,
    msapPlcySubMgmtProfiledTrafOnly  TruthValue,
    msapPlcySubMgmtNonSubTrafSubId   TLNamedItemOrEmpty,
    msapPlcySubMgmtNonSubTrafSubProf TNamedItemOrEmpty,
    msapPlcySubMgmtNonSubTrafSlaProf TNamedItemOrEmpty,
    msapPlcySubMgmtNonSubTrafAppProf TNamedItemOrEmpty,
    msapPlcyAssociatedMsaps          Counter32,
    msapPlcySubMgmtDefInterDestId    TmnxDefInterDestIdSource,
    msapPlcySubMgmtDefInterDestIdStr TNamedItemOrEmpty,
    msapPlcyIgmpTrkExpiryTime        Unsigned32,
    msapPlcyIgmpTrkImportPlcy        TPolicyStatementNameOrEmpty,
    msapPlcyIgmpTrkMaxNbrGrps        Unsigned32,
    msapPlcyIgmpTrkMaxNbrSrcs        Unsigned32,
    msapPlcySubMgmtDefFilterProfile  TNamedItemOrEmpty,
    msapPlcyLagLinkMapProfile        TmnxLinkMapProfileIdOrZero,
    msapPlcyIgmpTrkMaxNbrGrpSrcs     Unsigned32,
    msapPlcyDCpuProtPolicy           TNamedItemOrEmpty,
    msapPlcyCpmProtMonitorIP         TruthValue,
    msapPlcySticky                   TruthValue,
    msapPlcyStickyTimeout            Unsigned32
}

msapPlcyName                     OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyName specifies the name of the MSAP policy."
    ::= { msapPlcyEntry 1 }

msapPlcyRowStatus                OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyRowStatus is used for the creation and deletion
         of MSAP policies."
    ::= { msapPlcyEntry 2 }

msapPlcyLastChanged              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyLastChanged indicates the sysUpTime at the time
         of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapPlcyEntry 3 }

msapPlcyDescription              OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyDescription specifies the description of the MSAP
         policy."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 4 }

msapPlcyCpmProtPolicyId          OBJECT-TYPE
    SYNTAX      TCpmProtPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyCpmProtPolicyId specifies a CPM Protection policy
         for the MSAP policy.

         If a corresponding policy is not defined in
         TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue'
         error will be returned.

         A value of 254 specifies that the default CPM Protection policy is
         associated with the Managed SAP.

         This object is not supported on 7710, where the value of
         TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.

         An attempt  to set msapPlcyCpmProtPolicyId to a non-zero
         value on one of these unsupported chassis types will return
         an 'inconsistentValue' error."
    DEFVAL      { 254 }
    ::= { msapPlcyEntry 5 }

msapPlcyCpmProtMonitorMac        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyCpmProtMonitorMac specifies whether the
         tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy, as
         specified by msapPlcyCpmProtPolicyId, must be applied.

         If the value of msapPlcyCpmProtMonitorMac is 'true', the per-source
         rate limit must be applied.

         If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of
         msapPlcyCpmProtMonitorMac is irrelevant and will be ignored.

         This object is not supported on 7710, where the value of
         TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.

         An attempt  to set msapPlcyCpmProtMonitorMac to 'true'
         on one of these unsupported chassis types will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { msapPlcyEntry 6 }

msapPlcySubMgmtDefSubId          OBJECT-TYPE
    SYNTAX      TmnxDefSubIdSource
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefSubId specifies what will be used as
         the default subscriber identification applicable on the MSAP.

         This value is used in case no other source (like Radius) provides a
         subscriber identification string.

         If the value of this object is set to 'useSapId', the SAP-id will be
         used as the default subscriber identification string. In this case,
         msapPlcySubMgmtDefSubIdStr must contain the empty string, so any
         non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty
         string.

         If the value of this object is set to 'useAutoId', the auto-generated
         subscriber identification string, as defined in
         tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber
         identification string. In this case, msapPlcySubMgmtDefSubIdStr must
         contain the empty string, so any non-empty string in
         msapPlcySubMgmtDefSubIdStr will be set to an empty string.

         If the value of this object is set to 'useString', the value of
         msapPlcySubMgmtDefSubIdStr will be used as the default subscriber
         identification string. In this case, an empty
         msapPlcySubMgmtDefSubIdStr means that there is no default subscriber
         identification configured."
    DEFVAL      { useString }
    ::= { msapPlcyEntry 7 }

msapPlcySubMgmtDefSubIdStr       OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefSubIdStr specifies the default
         subscriber identification string applicable on this MSAP."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 8 }

msapPlcySubMgmtDefSubProfile     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefSubProfile specifies the default
         subscriber profile applicable on the MSAP.

         If a corresponding profile is not defined in tmnxSubProfileTable, an
         'inconsistentValue' error will be returned.

         A value of 'default' is not allowed for this object."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 9 }

msapPlcySubMgmtDefSlaProfile     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefSlaProfile specifies the default SLA
         profile applicable on the MSAP.

         If a corresponding profile is not defined in tmnxSLAProfileTable, an
         'inconsistentValue' error will be returned."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 10 }

msapPlcySubMgmtDefAppProfile     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefAppProfile specifies the default
         application profile applicable on the MSAP.

         If a corresponding profile is not defined in
         TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable, an 'inconsistentValue' error
         will be returned."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 11 }

msapPlcySubMgmtSubIdPlcy         OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtSubIdPlcy specifies the subscriber
         identification policy applicable on the MSAP.

         If a corresponding profile is not defined in tmnxSubIdentPolicyTable,
         an 'inconsistentValue' error will be returned."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 12 }

msapPlcySubMgmtSubscriberLimit   OBJECT-TYPE
    SYNTAX      TmnxSapSubscriberLimit
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtSubscriberLimit specifies the maximum
         number of subscribers allowed for the MSAP.

         A value is 0 means there is no limit.

         The values for the objects msapPlcySubMgmtProfiledTrafOnly,
         msapPlcySubMgmtNonSubTrafSubProf, and msapPlcySubMgmtNonSubTrafSlaProf
         are only meaningful when the value of msapPlcySubMgmtSubscriberLimit
         is 1 and will not be used when the value of
         msapPlcySubMgmtSubscriberLimit is not 1."
    DEFVAL      { 1 }
    ::= { msapPlcyEntry 13 }

msapPlcySubMgmtProfiledTrafOnly  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtProfiledTrafOnly specifies whether only
         profiled traffic is applicable for the MSAP. If set to 'true', the
         MSAP queues will be deleted.

         The value of this object is only meaningful if
         msapPlcySubMgmtSubscriberLimit is set to 1."
    DEFVAL      { false }
    ::= { msapPlcyEntry 14 }

msapPlcySubMgmtNonSubTrafSubId   OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtNonSubTrafSubId specifies the subscriber
         identification applicable on the MSAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         msapPlcySubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 15 }

msapPlcySubMgmtNonSubTrafSubProf OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtNonSubTrafSubProf specifies the subscriber
         profile applicable on the MSAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         msapPlcySubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 16 }

msapPlcySubMgmtNonSubTrafSlaProf OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtNonSubTrafSlaProf specifies the SLA
         profile applicable on the MSAP for all non-subscriber traffic.

         The value of this object is only meaningful if
         msapPlcySubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 17 }

msapPlcySubMgmtNonSubTrafAppProf OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtNonSubTrafAppProf specifies the
         Application profile applicable on the MSAP for all non-subscriber
         traffic.

         The value of this object is only meaningful if
         msapPlcySubMgmtSubscriberLimit is set to 1."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 18 }

msapPlcyAssociatedMsaps          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyAssociatedMsaps indicates the number of MSAPs
         associated with this MSAP policy."
    ::= { msapPlcyEntry 19 }

msapPlcySubMgmtDefInterDestId    OBJECT-TYPE
    SYNTAX      TmnxDefInterDestIdSource
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefInterDestId specifies what will be used
         as the default intermediate destination identifier applicable on the
         MSAP.

         This value is used in case no other source (like Radius) provides an
         intermediate destination identifier.

         If the value of this object is set to 'useString', the value of
         msapPlcySubMgmtDefInterDestIdStr will be used as the default
         intermediate destination identifier. In this case, an empty
         msapPlcySubMgmtDefInterDestIdStr means that there is no default
         intermediate destination identifier configured.

         If the value of this object is set to 'useTopQTag', the top q-tag of
         the MSAP will be used as the default intermediate destination
         identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must
         contain the empty string.

         If the value of this object is set to 'useVpi', the ATM VPI of the
         MSAP will be used as the default intermediate destination identifier.
         In this case, msapPlcySubMgmtDefInterDestIdStr must contain the empty
         string."
    DEFVAL      { useString }
    ::= { msapPlcyEntry 20 }

msapPlcySubMgmtDefInterDestIdStr OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefInterDestIdStr specifies the default
         subscriber identification string applicable on this MSAP."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 21 }

msapPlcyIgmpTrkExpiryTime        OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyIgmpTrkExpiryTime specifies the time in seconds
         that this system continues to track an inactive host.

         The value zero specifies that the value must be set to the actual
         value of the object svcIgmpTrkExpiryTime of the service an MSAP
         belongs to."
    DEFVAL      { 0 }
    ::= { msapPlcyEntry 22 }

msapPlcyIgmpTrkImportPlcy        OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object msapPlcyIgmpTrkImportPlcy specifies the policy
         statement that must be applied to all incoming IGMP messages on the
         MSAP."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 23 }

msapPlcyIgmpTrkMaxNbrGrps        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object msapPlcyIgmpTrkMaxNbrGrps specifies how many
         group addresses are allowed for the MSAP.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { msapPlcyEntry 24 }

msapPlcyIgmpTrkMaxNbrSrcs        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object msapPlcyIgmpTrkMaxNbrSrcs specifies how many
         source addresses are allowed per group address for the MSAP.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { msapPlcyEntry 25 }

msapPlcySubMgmtDefFilterProfile  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySubMgmtDefFilterProfile specifies the default
         filter profile applicable on the MSAP.

         The specified filter profile needs to exists in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable."
    DEFVAL      { "" }
    ::= { msapPlcyEntry 26 }

msapPlcyLagLinkMapProfile        OBJECT-TYPE
    SYNTAX      TmnxLinkMapProfileIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyLagLinkMapProfile specifies the LAG link map
         profile identifier associated with this MSAP policy."
    DEFVAL      { 0 }
    ::= { msapPlcyEntry 27 }

msapPlcyIgmpTrkMaxNbrGrpSrcs     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..32000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object msapPlcyIgmpTrkMaxNbrGrpSrcs specifies how
         many combinations of group and source are allowed.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { msapPlcyEntry 28 }

msapPlcyDCpuProtPolicy           OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyDCpuProtPolicy associates Distributed CPU
         Protection Policy with a MSAP policy."
    DEFVAL      { ''H }
    ::= { msapPlcyEntry 29 }

msapPlcyCpmProtMonitorIP         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyCpmProtMonitorIP specifies whether or not to
         apply the tmnxCpmProtPolPerSrcRateLimit of this MSAP policy's CPM
         Protection policy to IPv4 DHCP packets served by the MSAP policy, on a
         per source IP address basis.

         For example, suppose msapPlcyCpmProtMonitorIP is 'true', and this MSAP
         policy's msapPlcyCpmProtPolicyId points to a policy table row with
         tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two
         source IP addresses (e.g. 138.120.141.173 and 138.120.141.174) each
         send 150 DHCP packets/second to this SAP. Approx. 50 DHCP
         packets/second from each source will be discarded.

         If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of
         msapPlcyCpmProtMonitorIP is irrelevant and will be ignored.

         This object is not supported on 7710, where the value of
         TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set
         msapPlcyCpmProtMonitorIP to a non-zero value on one of these
         unsupported chassis types will return an 'inconsistentValue' error."
    DEFVAL      { false }
    ::= { msapPlcyEntry 30 }

msapPlcySticky                   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcySticky specifies if the associated managed SAPs
         are sticky.

         The system does not remove a sticky managed SAP automatically  when it
         becomes idle.

         A sticky managed SAP is only removed upon explicit request of  a
         management client  or when the timeout specified in
         msapPlcyStickyTimeout expires ."
    DEFVAL      { false }
    ::= { msapPlcyEntry 33 }

msapPlcyStickyTimeout            OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 5..604800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyStickyTimeout specifies the timeout period  to be
         used for sticky managed SAPs.

         The value '0' has the meaning of 'infinite'"
    DEFVAL      { 0 }
    ::= { msapPlcyEntry 34 }

msapTlsPlcyTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapTlsPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The msapTlsPlcyTable has an entry for each managed SAP (MSAP) policy
         configured in the system."
    ::= { tmnxSapObjs 45 }

msapTlsPlcyEntry                 OBJECT-TYPE
    SYNTAX      MsapTlsPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the VPLS-related configuration for a managed SAP
         (MSAP) policy.

         The values for each entry will be used to populate the following
         VPLS-related tables when the MSAP policy is applied to a MSAP:

         TIMETRA-SAP-MIB::sapTlsInfoTable TIMETRA-SAP-MIB::sapTlsDhcpInfoTable
         ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable"
    AUGMENTS    { msapPlcyEntry }
    ::= { msapTlsPlcyTable 1 }

MsapTlsPlcyEntry                 ::= SEQUENCE
{
    msapTlsPlcyLastChanged           TimeStamp,
    msapTlsPlcySplitHorizonGrp       TNamedItemOrEmpty,
    msapTlsPlcyArpReplyAgent         INTEGER,
    msapTlsPlcySubMgmtMacDaHashing   TruthValue,
    msapTlsPlcyDhcpLeasePopulate     Unsigned32,
    msapTlsPlcyDhcpPrxyAdminState    TmnxEnabledDisabled,
    msapTlsPlcyDhcpPrxyServAddrType  InetAddressType,
    msapTlsPlcyDhcpPrxyServAddr      InetAddress,
    msapTlsPlcyDhcpPrxyLeaseTime     Unsigned32,
    msapTlsPlcyDhcpPrxyLTRadOverride TruthValue,
    msapTlsPlcyDhcpInfoAction        INTEGER,
    msapTlsPlcyDhcpCircuitId         INTEGER,
    msapTlsPlcyDhcpRemoteId          INTEGER,
    msapTlsPlcyDhcpRemoteIdString    TNamedItemOrEmpty,
    msapTlsPlcyDhcpVendorInclOpts    BITS,
    msapTlsPlcyDhcpVendorOptStr      TNamedItemOrEmpty,
    msapTlsPlcyEgressMcastGroup      TNamedItemOrEmpty,
    msapTlsPlcyIgmpSnpgImportPlcy    TPolicyStatementNameOrEmpty,
    msapTlsPlcyIgmpSnpgFastLeave     TmnxEnabledDisabled,
    msapTlsPlcyIgmpSnpgSendQueries   TmnxEnabledDisabled,
    msapTlsPlcyIgmpSnpgGenQueryIntv  Unsigned32,
    msapTlsPlcyIgmpSnpgQueryRespIntv Unsigned32,
    msapTlsPlcyIgmpSnpgRobustCount   Unsigned32,
    msapTlsPlcyIgmpSnpgLastMembIntvl Unsigned32,
    msapTlsPlcyIgmpSnpgMaxNbrGrps    Unsigned32,
    msapTlsPlcyIgmpSnpgMvrFromVplsId TmnxServId,
    msapTlsPlcyIgmpSnpgVersion       TmnxIgmpVersion,
    msapTlsPlcyIgmpSnpgMcacPlcyName  TPolicyStatementNameOrEmpty,
    msapTlsPlcyIgmpSnpgMcacUncnstBW  Integer32,
    msapTlsPlcyIgmpSnpgMcacPrRsvMnBW Integer32,
    msapTlsPlcyArpHostMaxNumHosts    Unsigned32,
    msapTlsPlcyArpHostMinAuthIntvl   Unsigned32,
    msapTlsPlcyIgmpSnpgMcacUsePortWt TruthValue,
    msapTlsPlcyIngQosPolicyId        TSapIngressPolicyID,
    msapTlsPlcyIngQosQueueingType    INTEGER,
    msapTlsPlcyIgmpSnpgMcIfPlcyName  TPolicyStatementNameOrEmpty,
    msapTlsPlcyEgrQosPolicyId        TSapEgressPolicyID
}

msapTlsPlcyLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyLastChanged indicates the sysUpTime at the
         time of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapTlsPlcyEntry 1 }

msapTlsPlcySplitHorizonGrp       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcySplitHorizonGrp specifies the name of the
         split-horizon group for the MSAP.

         If the name specified does not correspond to a tlsShgInfoEntry for the
         VPLS service, the creation of the MSAP will fail. Additionally, if
         msapTlsPlcySplitHorizonGrp is set to a new value, the
         sapSplitHorizonGrp object for any existing MSAPs created by this
         policy will not be updated."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 2 }

msapTlsPlcyArpReplyAgent         OBJECT-TYPE
    SYNTAX      INTEGER {
        disabled               (1),
        enabled                (2),
        enabledWithSubscrIdent (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyArpReplyAgent specifies the status of the
         special ARP response mechanism in the system for ARP requests destined
         to static or dynamic hosts associated with the MSAP.

         'disabled'               - the ARP reply function is not operational
         'enabled'                - the ARP reply function is enabled without
                                      subscriber identification.
         'enabledWithSubscrIdent' - the ARP reply function is enabled
                                      with subscriber identification."
    DEFVAL      { disabled }
    ::= { msapTlsPlcyEntry 3 }

msapTlsPlcySubMgmtMacDaHashing   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcySubMgmtMacDaHashing specifies whether
         subscriber traffic egressing a LAG MSAP has its egress LAG link
         selected by a function of the MAC destination address instead of
         subscriber id."
    DEFVAL      { false }
    ::= { msapTlsPlcyEntry 4 }

msapTlsPlcyDhcpLeasePopulate     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..131071)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number
         of DHCP lease states allowed on the MSAP."
    DEFVAL      { 1 }
    ::= { msapTlsPlcyEntry 5 }

msapTlsPlcyDhcpPrxyAdminState    OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpPrxyAdminState specifies the desired
         administrative state of the proxy server on the interface."
    DEFVAL      { disabled }
    ::= { msapTlsPlcyEntry 6 }

msapTlsPlcyDhcpPrxyServAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpPrxyServAddrType specifies the address
         type of msapTlsPlcyDhcpPrxyServAddr."
    DEFVAL      { unknown }
    ::= { msapTlsPlcyEntry 7 }

msapTlsPlcyDhcpPrxyServAddr      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of
         the which will be used as the source address of the emulated DHCP
         server in the context of the VPLS MSAP.

         This address is mandatory for the proxy server capability and it
         should be in the context of the subnet represented by the VPLS."
    DEFVAL      { ''H }
    ::= { msapTlsPlcyEntry 8 }

msapTlsPlcyDhcpPrxyLeaseTime     OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 300..315446399)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how
         long a DHCP client is allowed to use the offered IP address.

         A value of 0 means the lease time provided by a RADIUS or an upstream
         DHCP server will not be overridden. A value of 7 days (315446399
         seconds) is used when RADIUS does not provide a lease time."
    DEFVAL      { 0 }
    ::= { msapTlsPlcyEntry 9 }

msapTlsPlcyDhcpPrxyLTRadOverride OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not
         the lease time provided by the RADIUS server is presented to the DHCP
         client.

         By default the proxy server will always make use of
         msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time
         information is provided from the RADIUS server. When
         msapTlsPlcyDhcpPrxyLTRadOverride is set to 'true', the proxy server
         will use the lease time information provided by the RADIUS server,
         regardless of the configured lease time."
    DEFVAL      { false }
    ::= { msapTlsPlcyEntry 10 }

msapTlsPlcyDhcpInfoAction        OBJECT-TYPE
    SYNTAX      INTEGER {
        replace (1),
        drop    (2),
        keep    (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpInfoAction specifies the DHCP option
         reforwarding policy:

         'replace' - replace existing information with configured
                       information
         'drop'    - discard messages with existing relay information if the
                       option 82 information is also present
         'keep'    - retain the existing relay information"
    DEFVAL      { keep }
    ::= { msapTlsPlcyEntry 11 }

msapTlsPlcyDhcpCircuitId         OBJECT-TYPE
    SYNTAX      INTEGER {
        none           (0),
        asciiTuple     (1),
        vlanAsciiTuple (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpCircuitId specifies whether or not the
         circuit-id suboption is present, and if it is present what information
         goes in it:

         none           - the circuit-id suboption will not be part of
                          the information option (Option 82).
         asciiTuple     - the ASCII-encoded concatenated tuple consisting
                          of the
                              - access-node-identifier
                              - service-id
                              - interface name
                          is used.
         vlanAsciiTuple - the format will include VLAN-id and dot1p bits
                          in addition to what is included in ascii-tuple
                          already.  The format is supported on dot1q and
                          qinq encapsulated ports only.  Thus, when the
                          option 82 bits are stripped, dot1p bits will be
                          copied to the Ethernet header of an outgoing
                          packet."
    DEFVAL      { asciiTuple }
    ::= { msapTlsPlcyEntry 12 }

msapTlsPlcyDhcpRemoteId          OBJECT-TYPE
    SYNTAX      INTEGER {
        none      (1),
        mac       (2),
        remote-id (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpRemoteId specifies what information goes
         into the remote-id suboption in the DHCP Relay packet.

         If the value of this object is set to 'none', the remote-id suboption
         will not be part of the information option (Option 82).

         If the value of this object is set to 'mac', the MAC address of the
         remote end is encoded in the suboption.

         If the value of this object is set to 'remote-id',
         msapTlsPlcyDhcpRemoteIdString will represent the remote-id.

         By default, the remote-id value is none."
    DEFVAL      { none }
    ::= { msapTlsPlcyEntry 13 }

msapTlsPlcyDhcpRemoteIdString    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id.
         The value of this object is ignored if msapTlsPlcyDhcpRemoteId does
         not have the value of 'remote-id'."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 14 }

msapTlsPlcyDhcpVendorInclOpts    OBJECT-TYPE
    SYNTAX      BITS {
        systemId  (0),
        clientMac (1),
        serviceId (2),
        sapId     (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded
         in the Nokia vendor specific sub-option of option 82.

         The value of this object is only used when msapTlsPlcyDhcpInfoAction
         is 'replace'."
    DEFVAL      { {} }
    ::= { msapTlsPlcyEntry 15 }

msapTlsPlcyDhcpVendorOptStr      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyDhcpVendorOptStr specifies the string that
         goes into the Nokia vendor specific sub-option of option 82.

         This string is only used when msapTlsPlcyDhcpInfoAction is set to
         'replace'."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 16 }

msapTlsPlcyEgressMcastGroup      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of msapTlsPlcyEgressMcastGroup specifies the Egress
         Multicast Group for the MSAP."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 17 }

msapTlsPlcyIgmpSnpgImportPlcy    OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy
         statement that is be applied to all incoming IGMP messages on the
         MSAP."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 18 }

msapTlsPlcyIgmpSnpgFastLeave     OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgFastLeave specifies whether fast leave
         is allowed on this MSAP.

         If set to 'enabled', the system prunes the port on which an IGMP
         'leave' message has been received without waiting for the Group
         Specific Query to timeout."
    DEFVAL      { disabled }
    ::= { msapTlsPlcyEntry 19 }

msapTlsPlcyIgmpSnpgSendQueries   OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgSendQueries specifies whether the
         system generates General Queries by itself on the MSAP."
    DEFVAL      { disabled }
    ::= { msapTlsPlcyEntry 20 }

msapTlsPlcyIgmpSnpgGenQueryIntv  OBJECT-TYPE
    SYNTAX      Unsigned32 (2..1024)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies the interval
         (in seconds) between two consecutive general queries sent by the
         system on the MSAP.

         The value of this object is only meaningful when the value of
         msapTlsPlcyIgmpSnpgSendQueries is 'enabled'."
    DEFVAL      { 125 }
    ::= { msapTlsPlcyEntry 21 }

msapTlsPlcyIgmpSnpgQueryRespIntv OBJECT-TYPE
    SYNTAX      Unsigned32 (1..1023)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies the maximum
         response time (in seconds) advertised in IGMPv2/v3 queries.

         The value of this object is only meaningful when the value of
         msapTlsPlcyIgmpSnpgSendQueries is 'enabled'."
    DEFVAL      { 10 }
    ::= { msapTlsPlcyEntry 22 }

msapTlsPlcyIgmpSnpgRobustCount   OBJECT-TYPE
    SYNTAX      Unsigned32 (2..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgRobustCount specifies the robustness
         variable on the MSAP.

         This object allows tuning for the expected packet loss on the MSAP. If
         a MSAP is expected to be lossy, the Robustness Variable may be
         increased. IGMP snooping is robust to (Robustness Variable-1) packet
         losses.

         The value of this object is only meaningful when the value of
         msapTlsPlcyIgmpSnpgSendQueries is 'enabled'."
    DEFVAL      { 2 }
    ::= { msapTlsPlcyEntry 23 }

msapTlsPlcyIgmpSnpgLastMembIntvl OBJECT-TYPE
    SYNTAX      Unsigned32 (1..50)
    UNITS       "deciseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the Max
         Response Time (in deciseconds) used in Group-Specific and
         Group-Source-Specific Queries sent in response to 'leave' messages.
         This is also the amount of time between Group-Specific Query messages.

         This value may be tuned to modify the leave latency of the network. A
         reduced value results in reduced time to detect the loss of the last
         member of a group."
    DEFVAL      { 10 }
    ::= { msapTlsPlcyEntry 24 }

msapTlsPlcyIgmpSnpgMaxNbrGrps    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group
         addresses are allowed for the MSAP.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { msapTlsPlcyEntry 25 }

msapTlsPlcyIgmpSnpgMvrFromVplsId OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which
         VPLS the multicast streams corresponding to the groups learned via the
         MSAP are copied.

         Groups which cannot be joined to the corresponding MVR VPLS (because
         MVR is not up or the configured MVR policy rejects the group) copy the
         multicast streams from the local VPLS if IGMP snooping is up (i.e.
         tlsIgmpSnpgCfgAdminState is 'enabled')."
    DEFVAL      { 0 }
    ::= { msapTlsPlcyEntry 26 }

msapTlsPlcyIgmpSnpgVersion       OBJECT-TYPE
    SYNTAX      TmnxIgmpVersion
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgVersion specifies the version of IGMP
         running on the MSAP."
    DEFVAL      { version3 }
    ::= { msapTlsPlcyEntry 27 }

msapTlsPlcyIgmpSnpgMcacPlcyName  OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name of the
         multicast CAC (Connection Admission Control) policy."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 28 }

msapTlsPlcyIgmpSnpgMcacUncnstBW  OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..2147483647)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth
         assigned for interface's multicast CAC policy traffic in kilobit(s)
         per second(kbps).

         If the default value of '-1' is set, there is no constraint on
         bandwidth allocated at the interface.

         If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if a
         multicast CAC policy is assigned on the interface, then no group
         (channel) from that policy is allowed on that interface."
    DEFVAL      { -1 }
    ::= { msapTlsPlcyEntry 29 }

msapTlsPlcyIgmpSnpgMcacPrRsvMnBW OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..2147483647)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth
         pre-reserved for all the mandatory channels on a given interface in
         kilobit(s) per second(kbps).

         If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory
         channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW
         is '-1', then all mandatory and optional channels are allowed.

         If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the value
         of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained
         bandwidth on a given interface is allocated to mandatory channels
         configured through multicast CAC policy on that interface and no
         optional groups (channels) are allowed.

         The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less
         than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt
         to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than that
         of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in 'inconsistentValue'
         error."
    DEFVAL      { -1 }
    ::= { msapTlsPlcyEntry 30 }

msapTlsPlcyArpHostMaxNumHosts    OBJECT-TYPE
    SYNTAX      Unsigned32 (1..131071)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyArpHostMaxNumHosts specifies the maximum
         number of ARP hosts allowed on the TLS MSAP."
    DEFVAL      { 1 }
    ::= { msapTlsPlcyEntry 31 }

msapTlsPlcyArpHostMinAuthIntvl   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..6000)
    UNITS       "minutes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyArpHostMinAuthIntvl specifies the minimum
         interval between two consecutive authentication attempts for the same
         ARP host."
    DEFVAL      { 15 }
    ::= { msapTlsPlcyEntry 32 }

msapTlsPlcyIgmpSnpgMcacUsePortWt OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMcacUsePortWt specifies if this system
         must use the LAG port weight while calculating Multicast CAC
         constraints.

         The LAG port weight is configured with the object
         TIMETRA-LAG-MIB::tLagPortWeightSpeed."
    DEFVAL      { false }
    ::= { msapTlsPlcyEntry 33 }

msapTlsPlcyIngQosPolicyId        OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIngQosPolicyId specifies the ingress QoS
         policy applicable to this MSAP policy in VPLS (L2) services. The
         corresponding policy is defined in TIMETRA-QOS-MIB::tSapIngressTable."
    DEFVAL      { 1 }
    ::= { msapTlsPlcyEntry 34 }

msapTlsPlcyIngQosQueueingType    OBJECT-TYPE
    SYNTAX      INTEGER {
        multipointShared (1),
        serviceQueueing  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIngQosQueueingType specifies the ingress
         queueing type applicable to this MSAP policy in VPLS (L2) services."
    DEFVAL      { multipointShared }
    ::= { msapTlsPlcyEntry 35 }

msapTlsPlcyIgmpSnpgMcIfPlcyName  OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyIgmpSnpgMcIfPlcyName specifies the name of the
         multicast CAC (Connection Admission Control) interface policy."
    DEFVAL      { "" }
    ::= { msapTlsPlcyEntry 36 }

msapTlsPlcyEgrQosPolicyId        OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyEgrQosPolicyId specifies the egress QoS policy
         applicable to this MSAP policy in VPLS (L2) services.

         The value must correspond to a conceptual row in the
         TIMETRA-QOS-MIB::tSapEgressTable."
    DEFVAL      { 1 }
    ::= { msapTlsPlcyEntry 37 }

msapIgmpSnpgMcacLevelTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapIgmpSnpgMcacLevelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The msapIgmpSnpgMcacLevelTable has an entry for each multicast CAC
         policy constraint level configured for a Managed SAP policy."
    ::= { tmnxSapObjs 46 }

msapIgmpSnpgMcacLevelEntry       OBJECT-TYPE
    SYNTAX      MsapIgmpSnpgMcacLevelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a multicast CAC policy bundle level
         constraints for a particular Managed SAP policy. Entries are created
         and deleted by the user."
    INDEX       {
        msapPlcyName,
        msapIgmpSnpgMcacLevelId
    }
    ::= { msapIgmpSnpgMcacLevelTable 1 }

MsapIgmpSnpgMcacLevelEntry       ::= SEQUENCE
{
    msapIgmpSnpgMcacLevelId          Unsigned32,
    msapIgmpSnpgMcacLevelRowStatus   RowStatus,
    msapIgmpSnpgMcacLevelLastChanged TimeStamp,
    msapIgmpSnpgMcacLevelBW          Unsigned32
}

msapIgmpSnpgMcacLevelId          OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLevelId indicates the level id of the
         multicast CAC policy bundle constraint.

         The value of level 1 has the highest priority and level 8 the lowest."
    ::= { msapIgmpSnpgMcacLevelEntry 1 }

msapIgmpSnpgMcacLevelRowStatus   OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLevelRowStatus is used for creation and
         deletion of level constraint in a CAC for a Managed SAP policy."
    ::= { msapIgmpSnpgMcacLevelEntry 2 }

msapIgmpSnpgMcacLevelLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLevelLastChanged indicates the sysUpTime
         at the time of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapIgmpSnpgMcacLevelEntry 3 }

msapIgmpSnpgMcacLevelBW          OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLevelBW specifies the bandwidth in
         kilobit(s) per second (kbps) for the level."
    DEFVAL      { 1 }
    ::= { msapIgmpSnpgMcacLevelEntry 4 }

msapIgmpSnpgMcacLagTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapIgmpSnpgMcacLagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The msapIgmpSnpgMcacLagTable has an entry for each lag port configured
         for a multicast CAC policy bundle configured for a Managed SAP policy."
    ::= { tmnxSapObjs 47 }

msapIgmpSnpgMcacLagEntry         OBJECT-TYPE
    SYNTAX      MsapIgmpSnpgMcacLagEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a particular multicast CAC lag port
         constraints for a Managed SAP policy.. Entries are created and deleted
         by the user."
    INDEX       {
        msapPlcyName,
        msapIgmpSnpgMcacLagPortsDown
    }
    ::= { msapIgmpSnpgMcacLagTable 1 }

MsapIgmpSnpgMcacLagEntry         ::= SEQUENCE
{
    msapIgmpSnpgMcacLagPortsDown     Unsigned32,
    msapIgmpSnpgMcacLagRowStatus     RowStatus,
    msapIgmpSnpgMcacLagLastChanged   TimeStamp,
    msapIgmpSnpgMcacLagLevel         Unsigned32
}

msapIgmpSnpgMcacLagPortsDown     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..64)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLagPortsDown indicates the configured
         number of ports in a lag group that are down.

         If the number of ports available in the lag is reduced by the number
         of ports configured for msapIgmpSnpgMcacLagPortsDown object then
         bandwidth allowed for bundle will be updated to the value of
         msapIgmpSnpgMcacLevelBW indexed by msapIgmpSnpgMcacLagLevel value."
    ::= { msapIgmpSnpgMcacLagEntry 1 }

msapIgmpSnpgMcacLagRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLagRowStatus is used for creation and
         deletion of lag constraint in a CAC policy."
    ::= { msapIgmpSnpgMcacLagEntry 2 }

msapIgmpSnpgMcacLagLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLagLastChanged indicates the sysUpTime at
         the time of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapIgmpSnpgMcacLagEntry 3 }

msapIgmpSnpgMcacLagLevel         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLagLevel specifies the level id to use
         when the value of msapIgmpSnpgMcacLagPortsDown matches the actual
         number of ports down in a lag.

         Using the value of msapIgmpSnpgMcacLagLevel as an index, the
         operational MSAP unconstrained bandwidth will be set to
         msapIgmpSnpgMcacLevelBW.

         By default, for all lag constraints the link level will be set to 1 at
         row creation."
    DEFVAL      { 1 }
    ::= { msapIgmpSnpgMcacLagEntry 4 }

msapInfoTable                    OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains Managed SAP information."
    ::= { tmnxSapObjs 48 }

msapInfoEntry                    OBJECT-TYPE
    SYNTAX      MsapInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific Managed SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { msapInfoTable 1 }

MsapInfoEntry                    ::= SEQUENCE
{
    msapInfoCreationSapPortEncapVal  TmnxEncapVal,
    msapInfoCreationPlcyName         TNamedItem,
    msapInfoReEvalPolicy             TmnxActionType,
    msapInfoLastChanged              TimeStamp,
    msapInfoIsIdle                   TruthValue,
    msapInfoIsSticky                 TruthValue,
    msapInfoStickyExpiryTime         DateAndTimeOrEmpty
}

msapInfoCreationSapPortEncapVal  OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoCreationSapPortEncapVal indicates the port
         encapsulation value of the SAP with a sapSubType value of 'capture'
         that created this MSAP."
    ::= { msapInfoEntry 1 }

msapInfoCreationPlcyName         OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoCreationPlcyName indicates the value of the
         msapPlcyName object for MSAP policy used to create this MSAP."
    ::= { msapInfoEntry 2 }

msapInfoReEvalPolicy             OBJECT-TYPE
    SYNTAX      TmnxActionType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of msapInfoReEvalPolicy specifies whether to reapply the
         Managed SAP policy associated with this MSAP.

         When a SET of this object is done with a value of 'doAction', the
         system will attempt to reapply the MSAP policy indicated by
         msapInfoCreationPlcyName. If this action is successful, 'noError' will
         be returned. If this action is unsuccessful, an 'inconsistentValue'
         error will be returned. Attempting to SET this object with a value of
         'notApplicable' will have no effect and will return 'noError'.

         SNMP GET and GETNEXT requests on this object will return
         'notApplicable'."
    DEFVAL      { notApplicable }
    ::= { msapInfoEntry 3 }

msapInfoLastChanged              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoLastChanged indicates the sysUpTime at the time
         of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapInfoEntry 4 }

msapInfoIsIdle                   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoIsIdle indicates if this managed SAP is 'idle',
         meaning that there are no hosts associated with this managed SAP."
    ::= { msapInfoEntry 5 }

msapInfoIsSticky                 OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoIsSticky indicates if this managed SAP is
         'sticky'.

         The system will remove a 'sticky' managed SAP only upon explicit
         request of a management client."
    ::= { msapInfoEntry 6 }

msapInfoStickyExpiryTime         OBJECT-TYPE
    SYNTAX      DateAndTimeOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoStickyExpiryTime indicates when this  sticky
         managed SAP will be removed."
    ::= { msapInfoEntry 7 }

msapCaptureSapStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapCaptureSapStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains statistics for SAPs with a sapSubType value of
         'capture'."
    ::= { tmnxSapObjs 49 }

msapCaptureSapStatsEntry         OBJECT-TYPE
    SYNTAX      MsapCaptureSapStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Statistics for a specific 'capture' SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        msapCaptureSapStatsTriggerType
    }
    ::= { msapCaptureSapStatsTable 1 }

MsapCaptureSapStatsEntry         ::= SEQUENCE
{
    msapCaptureSapStatsTriggerType   INTEGER,
    msapCaptureSapStatsPktsRecvd     Counter32,
    msapCaptureSapStatsPktsRedirect  Counter32,
    msapCaptureSapStatsPktsDropped   Counter32
}

msapCaptureSapStatsTriggerType   OBJECT-TYPE
    SYNTAX      INTEGER {
        dhcp   (1),
        pppoe  (2),
        arp    (3),
        dhcp6  (4),
        ppp    (5),
        rtrsol (6),
        data   (7)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of msapCaptureSapStatsTriggerType indicates the type of
         trigger packets this entry is for."
    ::= { msapCaptureSapStatsEntry 1 }

msapCaptureSapStatsPktsRecvd     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapCaptureSapStatsPktsRecvd indicates the number of
         packets received on this 'capture' SAP."
    ::= { msapCaptureSapStatsEntry 2 }

msapCaptureSapStatsPktsRedirect  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapCaptureSapStatsPktsRedirect indicates the number of
         packets redirected on this 'capture' SAP."
    ::= { msapCaptureSapStatsEntry 3 }

msapCaptureSapStatsPktsDropped   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapCaptureSapStatsPktsDropped indicates the number of
         packets dropped on this 'capture' SAP."
    ::= { msapCaptureSapStatsEntry 4 }

sapTlsMrpTable                   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsMrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapTlsMrpTable augments sapTlsInfoTable with attributes of the
         Multiple Registration Protocol (MRP) feature for the TLS SAP."
    ::= { tmnxSapObjs 50 }

sapTlsMrpEntry                   OBJECT-TYPE
    SYNTAX      SapTlsMrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "MRP specific information about a SAP in a TLS."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsMrpTable 1 }

SapTlsMrpEntry                   ::= SEQUENCE
{
    sapTlsMrpRxPdus                  Counter32,
    sapTlsMrpDroppedPdus             Counter32,
    sapTlsMrpTxPdus                  Counter32,
    sapTlsMrpRxNewEvent              Counter32,
    sapTlsMrpRxJoinInEvent           Counter32,
    sapTlsMrpRxInEvent               Counter32,
    sapTlsMrpRxJoinEmptyEvent        Counter32,
    sapTlsMrpRxEmptyEvent            Counter32,
    sapTlsMrpRxLeaveEvent            Counter32,
    sapTlsMrpTxNewEvent              Counter32,
    sapTlsMrpTxJoinInEvent           Counter32,
    sapTlsMrpTxInEvent               Counter32,
    sapTlsMrpTxJoinEmptyEvent        Counter32,
    sapTlsMrpTxEmptyEvent            Counter32,
    sapTlsMrpTxLeaveEvent            Counter32
}

sapTlsMrpRxPdus                  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxPdus indicates the number of MRP packets
         received on this SAP."
    ::= { sapTlsMrpEntry 1 }

sapTlsMrpDroppedPdus             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpDroppedPdus indicates the number of dropped MRP
         packets on this SAP."
    ::= { sapTlsMrpEntry 2 }

sapTlsMrpTxPdus                  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxPdus indicates the number of MRP packets
         transmitted on this SAP."
    ::= { sapTlsMrpEntry 3 }

sapTlsMrpRxNewEvent              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP
         events received on this SAP."
    ::= { sapTlsMrpEntry 4 }

sapTlsMrpRxJoinInEvent           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In'
         MRP events received on this SAP."
    ::= { sapTlsMrpEntry 5 }

sapTlsMrpRxInEvent               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxInEvent indicates the number of 'In' MRP
         events received on this SAP."
    ::= { sapTlsMrpEntry 6 }

sapTlsMrpRxJoinEmptyEvent        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxJoinEmptyEvent indicates the number of 'Join
         Empty' MRP events received on this SAP."
    ::= { sapTlsMrpEntry 7 }

sapTlsMrpRxEmptyEvent            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP
         events received on this SAP."
    ::= { sapTlsMrpEntry 8 }

sapTlsMrpRxLeaveEvent            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP
         events received on this SAP."
    ::= { sapTlsMrpEntry 9 }

sapTlsMrpTxNewEvent              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP
         events transmitted on this SAP."
    ::= { sapTlsMrpEntry 10 }

sapTlsMrpTxJoinInEvent           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In'
         MRP events transmitted on this SAP."
    ::= { sapTlsMrpEntry 11 }

sapTlsMrpTxInEvent               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxInEvent indicates the number of 'In' MRP
         events transmitted on this SAP."
    ::= { sapTlsMrpEntry 12 }

sapTlsMrpTxJoinEmptyEvent        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxJoinEmptyEvent indicates the number of 'Join
         Empty' MRP events transmitted on this SAP."
    ::= { sapTlsMrpEntry 13 }

sapTlsMrpTxEmptyEvent            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP
         events transmitted on this SAP."
    ::= { sapTlsMrpEntry 14 }

sapTlsMrpTxLeaveEvent            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP
         events transmitted on this SAP."
    ::= { sapTlsMrpEntry 15 }

sapTlsMmrpTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsMmrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains an entry for each MAC address managed
         by Multiple MAC Registration Protocol (MMRP) on the SAP
         for the TLS.  Entries are dynamically created and
         destroyed by the system as the MAC Addresses are registered
         or declared in MMRP."
    ::= { tmnxSapObjs 51 }

sapTlsMmrpEntry                  OBJECT-TYPE
    SYNTAX      SapTlsMmrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "MMRP specific information about a MAC address managed by MMRP on a SAP
         in a TLS."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsMmrpMacAddr
    }
    ::= { sapTlsMmrpTable 1 }

SapTlsMmrpEntry                  ::= SEQUENCE
{
    sapTlsMmrpMacAddr                MacAddress,
    sapTlsMmrpDeclared               TruthValue,
    sapTlsMmrpRegistered             TruthValue,
    sapTlsMmrpEndStation             TruthValue
}

sapTlsMmrpMacAddr                OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMmrpMacAddr indicates an ethernet MAC address which
         is being managed by MMRP on this SAP."
    ::= { sapTlsMmrpEntry 1 }

sapTlsMmrpDeclared               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMmrpDeclared indicates whether the MRP applicant on
         this SAP is declaring this MAC address on behalf of MMRP."
    ::= { sapTlsMmrpEntry 2 }

sapTlsMmrpRegistered             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMmrpRegistered indicates whether the MRP registrant
         on this SAP has notified MMRP of a registration of this MAC address."
    ::= { sapTlsMmrpEntry 3 }

sapTlsMmrpEndStation             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMmrpEndStation indicates whether the MRP registrant
         on this SAP is registered per end station."
    ::= { sapTlsMmrpEntry 4 }

sapIngQosHsmdaQueueTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosHsmdaQueueEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The sapIngQosHsmdaQueueTable has an entry for each Hsmda SAP-level
         ingress queue override configured on the system.

         This table is obsoleted in 10.0 release."
    ::= { tmnxSapObjs 52 }

sapIngQosHsmdaQueueEntry         OBJECT-TYPE
    SYNTAX      SapIngQosHsmdaQueueEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Each row entry represents a Hsmda SAP-level ingress queue override
         record.

         Entries are created and deleted via SNMP SET operations on
         sapIngQosHsmdaQueueRowStatus."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosHsmdaQueueId
    }
    ::= { sapIngQosHsmdaQueueTable 1 }

SapIngQosHsmdaQueueEntry         ::= SEQUENCE
{
    sapIngQosHsmdaQueueId            TIngressHsmdaQueueId,
    sapIngQosHsmdaQueueRowStatus     RowStatus,
    sapIngQosHsmdaQueueLastChanged   TimeStamp,
    sapIngQosHsmdaQueueAdminPIR      THsmdaPIRKRateOverride,
    sapIngQosHsmdaQueueAdminCIR      THsmdaCIRKRateOverride,
    sapIngQosHsmdaQueueSlopePolicy   TNamedItemOrEmpty
}

sapIngQosHsmdaQueueId            OBJECT-TYPE
    SYNTAX      TIngressHsmdaQueueId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosHsmdaQueueId index specifies the Hsmda egress
         queue which this override record will affect."
    ::= { sapIngQosHsmdaQueueEntry 1 }

sapIngQosHsmdaQueueRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosHsmdaQueueRowStatus specifies..."
    ::= { sapIngQosHsmdaQueueEntry 2 }

sapIngQosHsmdaQueueLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosHsmdaQueueLastChanged indicates the sysUpTime at
         the time of the most recent management-initiated change to this table
         row."
    ::= { sapIngQosHsmdaQueueEntry 3 }

sapIngQosHsmdaQueueAdminPIR      OBJECT-TYPE
    SYNTAX      THsmdaPIRKRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosHsmdaQueueAdminPIR specifies the PIR rate in
         kbps allowed for this Hsmda ingress queue."
    DEFVAL      { -2 }
    ::= { sapIngQosHsmdaQueueEntry 4 }

sapIngQosHsmdaQueueAdminCIR      OBJECT-TYPE
    SYNTAX      THsmdaCIRKRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosHsmdaQueueAdminCIR specifies the CIR rate in
         kbps allowed for this Hsmda ingress queue."
    DEFVAL      { -2 }
    ::= { sapIngQosHsmdaQueueEntry 5 }

sapIngQosHsmdaQueueSlopePolicy   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngQosHsmdaQueueSlopePolicy specifies the slope policy
         that defines the RED slopes for this Hsmda ingress queue."
    DEFVAL      { "" }
    ::= { sapIngQosHsmdaQueueEntry 6 }

sapIngQosHsmdaQueueStatsTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosHsmdaQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains ingress QoS HSMDA queue SAP statistics.

         This table is obsoleted in 10.0 release."
    ::= { tmnxSapObjs 53 }

sapIngQosHsmdaQueueStatsEntry    OBJECT-TYPE
    SYNTAX      SapIngQosHsmdaQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS HSMDA queue."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosHsmdaQueueId
    }
    ::= { sapIngQosHsmdaQueueStatsTable 1 }

SapIngQosHsmdaQueueStatsEntry    ::= SEQUENCE
{
    sapIngHsmdaQStatCustId           TmnxCustId,
    sapIngHsmdaQStatHiPktsDropped    Counter64,
    sapIngHsmdaQStatLoPktsDropped    Counter64,
    sapIngHsmdaQStatHiOctsDropped    Counter64,
    sapIngHsmdaQStatLoOctsDropped    Counter64,
    sapIngHsmdaQStatInProfPktsFwd    Counter64,
    sapIngHsmdaQStatOutProfPktsFwd   Counter64,
    sapIngHsmdaQStatInProfOctsFwd    Counter64,
    sapIngHsmdaQStatOutProfOctsFwd   Counter64,
    sapIngHsmdaQStatAllPktsOffered   Counter64,
    sapIngHsmdaQStatAllOctsOffered   Counter64
}

sapIngHsmdaQStatCustId           OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatCustId indicates the customer ID for the
         statistics."
    ::= { sapIngQosHsmdaQueueStatsEntry 1 }

sapIngHsmdaQStatHiPktsDropped    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatHiPktsDropped indicates the number of
         high priority packets dropped on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 2 }

sapIngHsmdaQStatLoPktsDropped    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatLoPktsDropped indicates the number of
         low-priority packets dropped on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 3 }

sapIngHsmdaQStatHiOctsDropped    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatHiOctsDropped indicates the number of
         high priority octets dropped on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 4 }

sapIngHsmdaQStatLoOctsDropped    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatLoOctsDropped indicates the number of
         low-priority octets dropped on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 5 }

sapIngHsmdaQStatInProfPktsFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatInProfPktsFwd indicates the number of
         in-profile packets forwarded on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 6 }

sapIngHsmdaQStatOutProfPktsFwd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatOutProfPktsFwd indicates the number of
         out-of-profile packets forwarded on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 7 }

sapIngHsmdaQStatInProfOctsFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatInProfOctsFwd indicates the number of
         out-of-profile packets forwarded on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 8 }

sapIngHsmdaQStatOutProfOctsFwd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatOutProfOctsFwd indicates the number of
         out-of-profile packets forwarded on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 9 }

sapIngHsmdaQStatAllPktsOffered   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatAllPktsOffered indicates the total number
         of packets offered on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 10 }

sapIngHsmdaQStatAllOctsOffered   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaQStatAllOctsOffered indicates the total number
         of octets offered on ingress on this SAP."
    ::= { sapIngQosHsmdaQueueStatsEntry 11 }

sapIngQosHsmdaCntrStatsTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosHsmdaCntrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains ingress QoS HSMDA counter SAP statistics.

         This table is obsoleted in 10.0 release."
    ::= { tmnxSapObjs 54 }

sapIngQosHsmdaCntrStatsEntry     OBJECT-TYPE
    SYNTAX      SapIngQosHsmdaCntrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS HSMDA counter."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngHsmdaCntrStCntrId
    }
    ::= { sapIngQosHsmdaCntrStatsTable 1 }

SapIngQosHsmdaCntrStatsEntry     ::= SEQUENCE
{
    sapIngHsmdaCntrStCntrId          TIngressHsmdaCounterId,
    sapIngHsmdaCntrStCustId          TmnxCustId,
    sapIngHsmdaCntrStHiPktDrop       Counter64,
    sapIngHsmdaCntrStLoPktDrop       Counter64,
    sapIngHsmdaCntrStHiOctDrop       Counter64,
    sapIngHsmdaCntrStLoOctDrop       Counter64,
    sapIngHsmdaCntrStInProfPktFwd    Counter64,
    sapIngHsmdaCntrStOutProfPktFwd   Counter64,
    sapIngHsmdaCntrStInProfOctFwd    Counter64,
    sapIngHsmdaCntrStOutProfOctFwd   Counter64,
    sapIngHsmdaCntrStAllPktOffered   Counter64,
    sapIngHsmdaCntrStAllOctOffered   Counter64
}

sapIngHsmdaCntrStCntrId          OBJECT-TYPE
    SYNTAX      TIngressHsmdaCounterId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStCntrId indicates the counter ID for the
         statistics."
    ::= { sapIngQosHsmdaCntrStatsEntry 1 }

sapIngHsmdaCntrStCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStCustId indicates the customer ID for the
         statistics."
    ::= { sapIngQosHsmdaCntrStatsEntry 2 }

sapIngHsmdaCntrStHiPktDrop       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStHiPktDrop indicates the number of high
         priority packets dropped for the ingress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 3 }

sapIngHsmdaCntrStLoPktDrop       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStLoPktDrop indicates the number of
         low-priority packets dropped for the ingress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 4 }

sapIngHsmdaCntrStHiOctDrop       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStHiOctDrop indicates the number of high
         priority octets dropped for the ingress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 5 }

sapIngHsmdaCntrStLoOctDrop       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStLoOctDrop indicates the number of
         low-priority octets dropped for the ingress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 6 }

sapIngHsmdaCntrStInProfPktFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStInProfPktFwd indicates the number of
         in-profile packets forwarded for the ingress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 7 }

sapIngHsmdaCntrStOutProfPktFwd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStOutProfPktFwd indicates the number of
         out-of-profile packets forwarded for the ingress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 8 }

sapIngHsmdaCntrStInProfOctFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStInProfOctFwd indicates the number of
         out-of-profile packets forwarded for the ingress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 9 }

sapIngHsmdaCntrStOutProfOctFwd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStOutProfOctFwd indicates the number of
         out-of-profile packets forwarded for the ingress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 10 }

sapIngHsmdaCntrStAllPktOffered   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStAllPktOffered indicates the total number
         of packets offered on ingress on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 11 }

sapIngHsmdaCntrStAllOctOffered   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngHsmdaCntrStAllOctOffered indicates the total number
         of octets offered on ingress on this SAP."
    ::= { sapIngQosHsmdaCntrStatsEntry 12 }

sapEgrQosHsmdaQueueTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosHsmdaQueueEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The sapEgrQosHsmdaQueueTable has an entry for each Hsmda SAP-level
         egress queue override configured on the system."
    ::= { tmnxSapObjs 55 }

sapEgrQosHsmdaQueueEntry         OBJECT-TYPE
    SYNTAX      SapEgrQosHsmdaQueueEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a Hsmda SAP-level egress queue override
         record.

         Entries are created and deleted via SNMP SET operations on
         sapEgrQosHsmdaQueueRowStatus."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosHsmdaQueueId
    }
    ::= { sapEgrQosHsmdaQueueTable 1 }

SapEgrQosHsmdaQueueEntry         ::= SEQUENCE
{
    sapEgrQosHsmdaQueueId            TEgressHsmdaQueueId,
    sapEgrQosHsmdaQueueRowStatus     RowStatus,
    sapEgrQosHsmdaQueueLastChanged   TimeStamp,
    sapEgrQosHsmdaQueueAdminPIR      THsmdaPIRKRateOverride,
    sapEgrQosHsmdaQueueAdminCIR      THsmdaCIRKRateOverride,
    sapEgrQosHsmdaQueueSlopePolicy   TNamedItemOrEmpty,
    sapEgrQosHsmdaQueueWrrWeight     THsmdaWrrWeightOverride,
    sapEgrQosHsmdaQueueMBS           THSMDABurstSizeBytesOverride
}

sapEgrQosHsmdaQueueId            OBJECT-TYPE
    SYNTAX      TEgressHsmdaQueueId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueId index specifies the Hsmda egress
         queue which this override record will affect."
    ::= { sapEgrQosHsmdaQueueEntry 1 }

sapEgrQosHsmdaQueueRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueRowStatus controls the creation and
         deletion of rows in this table."
    ::= { sapEgrQosHsmdaQueueEntry 2 }

sapEgrQosHsmdaQueueLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueLastChanged indicates the sysUpTime at
         the time of the most recent management-initiated change to this table
         row."
    ::= { sapEgrQosHsmdaQueueEntry 3 }

sapEgrQosHsmdaQueueAdminPIR      OBJECT-TYPE
    SYNTAX      THsmdaPIRKRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueAdminPIR specifies the PIR rate in
         kbps allowed for this Hsmda ingress queue."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsmdaQueueEntry 4 }

sapEgrQosHsmdaQueueAdminCIR      OBJECT-TYPE
    SYNTAX      THsmdaCIRKRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueAdminCIR specifies the CIR rate in
         kbps allowed for this Hsmda ingress queue.

         This object is obsoleted in 10.0 Release."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsmdaQueueEntry 5 }

sapEgrQosHsmdaQueueSlopePolicy   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueSlopePolicy specifies the slope policy
         that defines the RED slopes for this Hsmda ingress queue."
    DEFVAL      { "" }
    ::= { sapEgrQosHsmdaQueueEntry 6 }

sapEgrQosHsmdaQueueWrrWeight     OBJECT-TYPE
    SYNTAX      THsmdaWrrWeightOverride
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueWrrWeight specifies the weighted
         round-robin weight override for the given egress hsmda queue on this
         SAP. When set to default value, the weighted round-robin weight is not
         overridden and the weighted round-robin weight from the sap-egress qos
         policy is honored.  When a non-default value is given, that is used
         instead of the weighted round-robin weight given in the sap-egress
         policy."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsmdaQueueEntry 7 }

sapEgrQosHsmdaQueueMBS           OBJECT-TYPE
    SYNTAX      THSMDABurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrQosHsmdaQueueMBS specifies the maximum buffer space
         (MBS) override in bytes for the given egress hsmda queue on this SAP.
         When set to default value, the MBS is not overridden and the MBS from
         the sap-egress qos policy is honored. When a non-default value is
         given, that is used instead of the MBS given in the sap-egress policy."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsmdaQueueEntry 8 }

sapEgrQosHsmdaQueueStatsTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosHsmdaQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains egress QoS HSMDA queue SAP statistics."
    ::= { tmnxSapObjs 56 }

sapEgrQosHsmdaQueueStatsEntry    OBJECT-TYPE
    SYNTAX      SapEgrQosHsmdaQueueStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS HSMDA queue."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosHsmdaQueueId
    }
    ::= { sapEgrQosHsmdaQueueStatsTable 1 }

SapEgrQosHsmdaQueueStatsEntry    ::= SEQUENCE
{
    sapEgrHsmdaQStatCustId           TmnxCustId,
    sapEgrHsmdaQStatInProfPktFwd     Counter64,
    sapEgrHsmdaQStatInProfPktDropd   Counter64,
    sapEgrHsmdaQStatOutProfPktFwd    Counter64,
    sapEgrHsmdaQStatOutProfPktDropd  Counter64,
    sapEgrHsmdaQStatInProfOctFwd     Counter64,
    sapEgrHsmdaQStatInProfOctDropd   Counter64,
    sapEgrHsmdaQStatOutProfOctFwd    Counter64,
    sapEgrHsmdaQStatOutProfOctDropd  Counter64
}

sapEgrHsmdaQStatCustId           OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatCustId indicates the customer ID for the
         statistics."
    ::= { sapEgrQosHsmdaQueueStatsEntry 1 }

sapEgrHsmdaQStatInProfPktFwd     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatInProfPktFwd indicates the number of
         in-profile packets forwarded on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 2 }

sapEgrHsmdaQStatInProfPktDropd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatInProfPktDropd indicates the number of
         in-profile packets dropped on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 3 }

sapEgrHsmdaQStatOutProfPktFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatOutProfPktFwd indicates the number of
         out-of-profile packets forwarded on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 4 }

sapEgrHsmdaQStatOutProfPktDropd  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatOutProfPktDropd indicates the number of
         out-of-profile packets dropped on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 5 }

sapEgrHsmdaQStatInProfOctFwd     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatInProfOctFwd indicates the number of
         out-of-profile packets forwarded on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 6 }

sapEgrHsmdaQStatInProfOctDropd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatInProfOctDropd indicates the number of
         out-of-profile packets dropped on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 7 }

sapEgrHsmdaQStatOutProfOctFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatOutProfOctFwd indicates the number of
         out-of-profile packets forwarded on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 8 }

sapEgrHsmdaQStatOutProfOctDropd  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaQStatOutProfOctDropd indicates the number of
         out-of-profile packets dropped on egress on this SAP."
    ::= { sapEgrQosHsmdaQueueStatsEntry 9 }

sapEgrQosHsmdaCntrStatsTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosHsmdaCntrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains egress QoS HSMDA counter SAP statistics."
    ::= { tmnxSapObjs 57 }

sapEgrQosHsmdaCntrStatsEntry     OBJECT-TYPE
    SYNTAX      SapEgrQosHsmdaCntrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS HSMDA counter."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrHsmdaCntrStCntrId
    }
    ::= { sapEgrQosHsmdaCntrStatsTable 1 }

SapEgrQosHsmdaCntrStatsEntry     ::= SEQUENCE
{
    sapEgrHsmdaCntrStCntrId          TEgressHsmdaCounterId,
    sapEgrHsmdaCntrStCustId          TmnxCustId,
    sapEgrHsmdaCntrStInProfPktFwd    Counter64,
    sapEgrHsmdaCntrStInProfPktDrop   Counter64,
    sapEgrHsmdaCntrStOutProfPktFwd   Counter64,
    sapEgrHsmdaCntrStOutProfPktDrop  Counter64,
    sapEgrHsmdaCntrStInProfOctFwd    Counter64,
    sapEgrHsmdaCntrStInProfOctDrop   Counter64,
    sapEgrHsmdaCntrStOutProfOctFwd   Counter64,
    sapEgrHsmdaCntrStOutProfOctDrop  Counter64
}

sapEgrHsmdaCntrStCntrId          OBJECT-TYPE
    SYNTAX      TEgressHsmdaCounterId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStCntrId indicates the counter ID for the
         statistics."
    ::= { sapEgrQosHsmdaCntrStatsEntry 1 }

sapEgrHsmdaCntrStCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStCustId indicates the customer ID for the
         statistics."
    ::= { sapEgrQosHsmdaCntrStatsEntry 2 }

sapEgrHsmdaCntrStInProfPktFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStInProfPktFwd indicates the number of
         in-profile packets forwarded for the egress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 3 }

sapEgrHsmdaCntrStInProfPktDrop   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStInProfPktDrop indicates the number of
         in-profile packets dropped for the egress counter, specified by the
         index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 4 }

sapEgrHsmdaCntrStOutProfPktFwd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStOutProfPktFwd indicates the number of
         out-of-profile packets forwarded for the egress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 5 }

sapEgrHsmdaCntrStOutProfPktDrop  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStOutProfPktDrop indicates the number of
         out-of-profile packets dropped for the egress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 6 }

sapEgrHsmdaCntrStInProfOctFwd    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStInProfOctFwd indicates the number of
         out-of-profile packets forwarded for the egress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 7 }

sapEgrHsmdaCntrStInProfOctDrop   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStInProfOctDrop indicates the number of
         out-of-profile packets dropped for the egress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 8 }

sapEgrHsmdaCntrStOutProfOctFwd   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStOutProfOctFwd indicates the number of
         out-of-profile packets forwarded for the egress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 9 }

sapEgrHsmdaCntrStOutProfOctDrop  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrHsmdaCntrStOutProfOctDrop indicates the number of
         out-of-profile packets dropped for the egress counter, specified by
         the index sapIngHsmdaCntrStCntrId, on this SAP."
    ::= { sapEgrQosHsmdaCntrStatsEntry 10 }

msapL3PlcyTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapL3PlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The msapL3PlcyTable has an entry for each managed SAP (MSAP) policy
         configured in the system."
    ::= { tmnxSapObjs 58 }

msapL3PlcyEntry                  OBJECT-TYPE
    SYNTAX      MsapL3PlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the L3-related configuration for a managed SAP
         (MSAP) policy."
    AUGMENTS    { msapPlcyEntry }
    ::= { msapL3PlcyTable 1 }

MsapL3PlcyEntry                  ::= SEQUENCE
{
    msapL3PlcyLastChanged            TimeStamp,
    msapL3PlcyAntiSpoof              INTEGER,
    msapL3PlcyIngQosPolicyId         TSapIngressPolicyID,
    msapL3PlcyIngQosQueueingType     INTEGER,
    msapL3PlcyEgrQosPolicyId         TSapEgressPolicyID
}

msapL3PlcyLastChanged            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapL3PlcyLastChanged indicates the sysUpTime at the time
         of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapL3PlcyEntry 1 }

msapL3PlcyAntiSpoof              OBJECT-TYPE
    SYNTAX      INTEGER {
        sourceIpAndMacAddr  (3),
        nextHopIpAndMacAddr (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object msapL3PlcyAntiSpoof specifies the type of
         anti-spoof filtering applicable on this MSAP."
    DEFVAL      { sourceIpAndMacAddr }
    ::= { msapL3PlcyEntry 2 }

msapL3PlcyIngQosPolicyId         OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapL3PlcyIngQosPolicyId specifies the ingress QoS policy
         applicable to this MSAP policy in IES/VPRN (L3) services. The
         corresponding policy is defined in TIMETRA-QOS-MIB::tSapIngressTable."
    DEFVAL      { 1 }
    ::= { msapL3PlcyEntry 3 }

msapL3PlcyIngQosQueueingType     OBJECT-TYPE
    SYNTAX      INTEGER {
        sharedQueueing  (1),
        serviceQueueing (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapL3PlcyIngQosQueueingType specifies the ingress
         queueing type applicable to this MSAP policy in IES/VPRN (L3)
         services."
    DEFVAL      { sharedQueueing }
    ::= { msapL3PlcyEntry 4 }

msapL3PlcyEgrQosPolicyId         OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapL3PlcyEgrQosPolicyId specifies the egress QoS policy
         applicable to this MSAP policy in IES/VPRN (L3) services.

         The value must correspond to a conceptual row in the
         TIMETRA-QOS-MIB::tSapEgressTable."
    DEFVAL      { 1 }
    ::= { msapL3PlcyEntry 5 }

msapPlcyTblLastChgd              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapPlcyTblLastChgd indicates the sysUpTime at the time
         of the last modification of msapPlcyTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 59 }

msapTlsPlcyTblLastChgd           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapTlsPlcyTblLastChgd indicates the sysUpTime at the
         time of the last modification of msapTlsPlcyTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 60 }

msapIgmpSnpgMcacLvlTblLastChgd   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLvlTblLastChgd indicates the sysUpTime at
         the time of the last modification of msapIgmpSnpgMcacLevelTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 61 }

msapIgmpSnpgMcacLagTblLastChgd   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapIgmpSnpgMcacLagTblLastChgd indicates the sysUpTime at
         the time of the last modification of msapIgmpSnpgMcacLagTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 62 }

msapInfoTblLastChgd              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapInfoTblLastChgd indicates the sysUpTime at the time
         of the last modification of msapInfoTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 63 }

msapL3PlcyTblLastChgd            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapL3PlcyTblLastChgd indicates the sysUpTime at the time
         of the last modification of msapL3PlcyTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 64 }

sapStaticHostMRtTblLastChgd      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtTblLastChgd indicates the sysUpTime at
         the time of the last modification of sapStaticHostMRtTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, this object contains a zero
         value."
    ::= { tmnxSapObjs 65 }

sapStaticHostMRtTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapStaticHostMRtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapStaticHostMRtTable contains managed routes of SAP static hosts.

         Entries can be created and deleted via SNMP SET operations."
    ::= { tmnxSapObjs 66 }

sapStaticHostMRtEntry            OBJECT-TYPE
    SYNTAX      SapStaticHostMRtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information on a specific managed route."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapStaticHostIpAddress,
        sapStaticHostMacAddress,
        sapStaticHostMRtAddrType,
        sapStaticHostMRtAddr,
        sapStaticHostMRtPrefixLen
    }
    ::= { sapStaticHostMRtTable 1 }

SapStaticHostMRtEntry            ::= SEQUENCE
{
    sapStaticHostMRtAddrType         InetAddressType,
    sapStaticHostMRtAddr             InetAddress,
    sapStaticHostMRtPrefixLen        InetAddressPrefixLength,
    sapStaticHostMRtRowStatus        RowStatus,
    sapStaticHostMRtLastMgmtChange   TimeStamp,
    sapStaticHostMRtStatus           TmnxManagedRouteStatus,
    sapStaticHostMRtMetric           Unsigned32,
    sapStaticHostMRtPreference       Unsigned32,
    sapStaticHostMRtTag              Unsigned32
}

sapStaticHostMRtAddrType         OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtAddrType indicates the address type of
         sapStaticHostMRtAddr."
    ::= { sapStaticHostMRtEntry 1 }

sapStaticHostMRtAddr             OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtAddr indicates the IP address of the
         managed route."
    ::= { sapStaticHostMRtEntry 2 }

sapStaticHostMRtPrefixLen        OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength (0..32)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtPrefixLen indicates the prefix length of
         the subnet associated with sapStaticHostMRtAddr."
    ::= { sapStaticHostMRtEntry 3 }

sapStaticHostMRtRowStatus        OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtRowStatus controls the creation and
         deletion of rows in this table."
    ::= { sapStaticHostMRtEntry 4 }

sapStaticHostMRtLastMgmtChange   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtLastMgmtChange indicates the value of
         sysUpTime at the time of the last management change of any writable
         object of this row."
    ::= { sapStaticHostMRtEntry 5 }

sapStaticHostMRtStatus           OBJECT-TYPE
    SYNTAX      TmnxManagedRouteStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtStatus indicates the state of this
         managed route."
    ::= { sapStaticHostMRtEntry 6 }

sapStaticHostMRtMetric           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtMetric specifies the route metric.

         The value of the metric is compared with the metric of other routes
         with the same preference."
    DEFVAL      { 0 }
    ::= { sapStaticHostMRtEntry 7 }

sapStaticHostMRtPreference       OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtPreference specifies the route
         preference.

         The value of the preference is compared with the preference of the
         routes coming from routing protocols."
    DEFVAL      { 0 }
    ::= { sapStaticHostMRtEntry 8 }

sapStaticHostMRtTag              OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostMRtTag specifies the route tag."
    DEFVAL      { 0 }
    ::= { sapStaticHostMRtEntry 9 }

sapTlsArpHostTableLastMgmtChange OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsArpHostTableLastMgmtChange indicates the sysUpTime
         at the time of the most recent management-initiated change to the
         sapTlsArpHostTable."
    ::= { tmnxSapObjs 67 }

sapTlsArpHostTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsArpHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ARP host configuration information about a SAP
         in a TLS."
    ::= { tmnxSapObjs 68 }

sapTlsArpHostEntry               OBJECT-TYPE
    SYNTAX      SapTlsArpHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "ARP host specific information about a SAP in a TLS."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsArpHostTable 1 }

SapTlsArpHostEntry               ::= SEQUENCE
{
    sapTlsArpHostLastMgmtChange      TimeStamp,
    sapTlsArpHostAdminState          TmnxAdminState,
    sapTlsArpHostMaxNumHosts         Unsigned32,
    sapTlsArpHostMinAuthIntvl        Unsigned32
}

sapTlsArpHostLastMgmtChange      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsArpHostLastMgmtChange indicates the sysUpTime at
         the time of the most recent management-initiated change to this table
         row."
    ::= { sapTlsArpHostEntry 1 }

sapTlsArpHostAdminState          OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsArpHostAdminState specifies the
         administrative state of the ARP host functionality on this TLS SAP."
    DEFVAL      { outOfService }
    ::= { sapTlsArpHostEntry 2 }

sapTlsArpHostMaxNumHosts         OBJECT-TYPE
    SYNTAX      Unsigned32 (1..131071)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsArpHostMaxNumHosts specifies the maximum number of
         ARP hosts allowed on this TLS SAP."
    DEFVAL      { 1 }
    ::= { sapTlsArpHostEntry 3 }

sapTlsArpHostMinAuthIntvl        OBJECT-TYPE
    SYNTAX      Unsigned32 (1..6000)
    UNITS       "minutes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsArpHostMinAuthIntvl specifies the minimum interval
         between two consecutive authentication attempts for the same ARP host."
    DEFVAL      { 15 }
    ::= { sapTlsArpHostEntry 4 }

sapIgmpTrkTableLastMgmtChange    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIgmpTrkTableLastMgmtChange indicates the sysUpTime at
         the time of the most recent management-initiated change to the
         sapIgmpTrkTable."
    ::= { tmnxSapObjs 69 }

sapIgmpTrkTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIgmpTrkEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains IGMP host tracking configuration information
         about SAPs.

         The system automatically creates an entry in this table for each SAP
         where it creates a corresponding entry in the sapSubMgmtInfoTable.

         This means that all SAPs that support Enhanced Subscriber Management
         have en entry in this table."
    ::= { tmnxSapObjs 70 }

sapIgmpTrkEntry                  OBJECT-TYPE
    SYNTAX      SapIgmpTrkEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "IGMP host tracking specific information about a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapIgmpTrkTable 1 }

SapIgmpTrkEntry                  ::= SEQUENCE
{
    sapIgmpTrkLastMgmtChange         TimeStamp,
    sapIgmpTrkExpiryTime             Unsigned32,
    sapIgmpTrkImportPlcy             TPolicyStatementNameOrEmpty,
    sapIgmpTrkMaxNbrGrps             Unsigned32,
    sapIgmpTrkNbrGrps                Gauge32,
    sapIgmpTrkMaxNbrSrcs             Unsigned32,
    sapIgmpTrkDisRtrAlertChk         TruthValue,
    sapIgmpTrkMaxNbrGrpSrcs          Unsigned32
}

sapIgmpTrkLastMgmtChange         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIgmpTrkLastMgmtChange indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row."
    ::= { sapIgmpTrkEntry 1 }

sapIgmpTrkExpiryTime             OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapIgmpTrkExpiryTime specifies the time in seconds that
         this system continues to track an inactive host.

         The value zero specifies that the value must be set to the actual
         value of the object svcIgmpTrkExpiryTime of the service this SAP
         belongs to."
    DEFVAL      { 0 }
    ::= { sapIgmpTrkEntry 2 }

sapIgmpTrkImportPlcy             OBJECT-TYPE
    SYNTAX      TPolicyStatementNameOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapIgmpTrkImportPlcy specifies the policy
         statement that must be applied to all incoming IGMP messages on this
         SAP."
    DEFVAL      { "" }
    ::= { sapIgmpTrkEntry 3 }

sapIgmpTrkMaxNbrGrps             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapIgmpTrkMaxNbrGrps specifies how many group
         addresses are allowed for this SAP.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { sapIgmpTrkEntry 4 }

sapIgmpTrkNbrGrps                OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIgmpTrkNbrGrps indicates how many group
         addresses are tracked for this SAP."
    ::= { sapIgmpTrkEntry 5 }

sapIgmpTrkMaxNbrSrcs             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapIgmpTrkMaxNbrSrcs specifies how many source
         addresses are allowed per group address for this SAP.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { sapIgmpTrkEntry 6 }

sapIgmpTrkDisRtrAlertChk         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "sapIgmpTrkDisRtrAlertChk is used to enable/disable router alert
         checking for IGMP messages received on this sap.

         If this flag is set to 'true', checking is disabled."
    DEFVAL      { false }
    ::= { sapIgmpTrkEntry 7 }

sapIgmpTrkMaxNbrGrpSrcs          OBJECT-TYPE
    SYNTAX      Unsigned32 (0..32000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapIgmpTrkMaxNbrGrpSrcs specifies how many
         group source addresses are allowed per group address for this SAP.

         The value 0 means that no limit is imposed."
    DEFVAL      { 0 }
    ::= { sapIgmpTrkEntry 8 }

sapFrInfoTable                   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapFrInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains FR SAP information."
    ::= { tmnxSapObjs 71 }

sapFrInfoEntry                   OBJECT-TYPE
    SYNTAX      SapFrInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific FR SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapFrInfoTable 1 }

SapFrInfoEntry                   ::= SEQUENCE
{
    sapFrInfoFrf12Mode               TmnxEnabledDisabled,
    sapFrInfoSchedulingClass         TmnxMcFrClassIndex,
    sapFrInfoLastChanged             TimeStamp
}

sapFrInfoFrf12Mode               OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapFrInfoFrf12Mode enables or disables the use of FRF12
         headers. This must be set to disabled for this entry to be added to a
         mlfr bundle."
    DEFVAL      { disabled }
    ::= { sapFrInfoEntry 1 }

sapFrInfoSchedulingClass         OBJECT-TYPE
    SYNTAX      TmnxMcFrClassIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapFrInfoSchedulingClass specifies the scheduling class
         to use for this sap. This object is only applicable for a sapPortId
         that has tmnxBundleType set to 'mlfr', sapFrInfoFrf12Mode SAPs set to
         'enabled' or tmnxFrIntfFrf12Mode set to 'enabled' and
         sapFrf12InfoInterleave set to 'disabled'."
    DEFVAL      { 3 }
    ::= { sapFrInfoEntry 2 }

sapFrInfoLastChanged             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapFrInfoLastChanged indicates the sysUpTime at the time
         of the last modification of this entry."
    ::= { sapFrInfoEntry 3 }

sapFrf12InfoTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapFrf12InfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains FRF12 SAP information."
    ::= { tmnxSapObjs 74 }

sapFrf12InfoEntry                OBJECT-TYPE
    SYNTAX      SapFrf12InfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific FR SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapFrf12InfoTable 1 }

SapFrf12InfoEntry                ::= SEQUENCE
{
    sapFrf12InfoFragmentThreshold    Unsigned32,
    sapFrf12InfoLastChanged          TimeStamp,
    sapFrf12InfoInterleave           TmnxEnabledDisabled
}

sapFrf12InfoFragmentThreshold    OBJECT-TYPE
    SYNTAX      Unsigned32 (128..512)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapFrf12InfoFragmentThreshold specifies the maximum
         length of a fragment to be transmitted."
    DEFVAL      { 128 }
    ::= { sapFrf12InfoEntry 1 }

sapFrf12InfoLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapFrf12InfoLastChanged indicates the sysUpTime at the
         time of the last modification of this entry.."
    ::= { sapFrf12InfoEntry 2 }

sapFrf12InfoInterleave           OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapFrf12InfoInterleave specifies whether or not FRF12
         interleave is enabled. If enabled, sapFrInfoSchedulingClass is not
         applicable."
    DEFVAL      { disabled }
    ::= { sapFrf12InfoEntry 3 }

sapArpHostStatTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapArpHostStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ARP host status and statistics information about
         SAPs."
    ::= { tmnxSapObjs 75 }

sapArpHostStatEntry              OBJECT-TYPE
    SYNTAX      SapArpHostStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "ARP host specific status and statistics information about a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapArpHostStatTable 1 }

SapArpHostStatEntry              ::= SEQUENCE
{
    sapArpHostStatLastClearedTime    TimeStamp,
    sapArpHostStatNumHosts           Gauge32,
    sapArpHostStatTriggersRx         Counter32,
    sapArpHostStatTriggersIgnored    Counter32,
    sapArpHostStatTrigIgnQFull       Counter32,
    sapArpHostStatNumForcedVerif     Counter32,
    sapArpHostStatNumCreated         Counter32,
    sapArpHostStatNumDeleted         Counter32,
    sapArpHostStatNumUpdated         Counter32,
    sapArpHostStatNumAuthReq         Counter32
}

sapArpHostStatLastClearedTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatLastClearedTime indicates the last time
         that these stats were cleared.

         The value zero indicates that they have not been cleared yet."
    ::= { sapArpHostStatEntry 1 }

sapArpHostStatNumHosts           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatNumHosts indicates the actual number of ARP
         hosts on this SAP."
    ::= { sapArpHostStatEntry 2 }

sapArpHostStatTriggersRx         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatTriggersRx indicates the number of ARP
         triggers received on this SAP since the last re-initialization of the
         local network management subsystem, or the last time the system
         statistics were cleared."
    ::= { sapArpHostStatEntry 3 }

sapArpHostStatTriggersIgnored    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatTriggersIgnored indicates the number of ARP
         triggers received on this SAP that did not result in the creation of a
         new ARP host since the last re-initialization of the local network
         management subsystem, or the last time the system statistics were
         cleared.

         This number does not include the number indicated by
         sapArpHostStatTrigIgnQFull."
    ::= { sapArpHostStatEntry 4 }

sapArpHostStatTrigIgnQFull       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatTrigIgnQFull indicates the number of ARP
         triggers received on this SAP that did not result in the creation of a
         new ARP host because the internal ARP trigger event queue of the
         system was full, since the last re-initialization of the local network
         management subsystem, or the last time the system statistics were
         cleared."
    ::= { sapArpHostStatEntry 5 }

sapArpHostStatNumForcedVerif     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatNumForcedVerif indicates the number of
         times that the system started a forced subscriber host connectivity
         verification for an ARP host on this SAP since the last
         re-initialization of the local network management subsystem, or the
         last time the system statistics were cleared."
    ::= { sapArpHostStatEntry 6 }

sapArpHostStatNumCreated         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatNumCreated indicates the number of times
         that an ARP host was created on this SAP since the last
         re-initialization of the local network management subsystem, or the
         last time the system statistics were cleared."
    ::= { sapArpHostStatEntry 7 }

sapArpHostStatNumDeleted         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatNumDeleted indicates the number of times
         that an ARP host was deleted on this SAP since the last
         re-initialization of the local network management subsystem, or the
         last time the system statistics were cleared."
    ::= { sapArpHostStatEntry 8 }

sapArpHostStatNumUpdated         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatNumUpdated indicates the number of times
         that an ARP host was updated on this SAP since the last
         re-initialization of the local network management subsystem, or the
         last time the system statistics were cleared."
    ::= { sapArpHostStatEntry 9 }

sapArpHostStatNumAuthReq         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapArpHostStatNumAuthReq indicates the number of times
         that the system initiated an authentication request for an ARP host on
         this SAP since the last re-initialization of the local network
         management subsystem, or the last time the system statistics were
         cleared."
    ::= { sapArpHostStatEntry 10 }

sapPbbTable                      OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPbbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains Provider Backbone Bridging (PBB/IEEE 802.1ah)
         SAP information."
    ::= { tmnxSapObjs 76 }

sapPbbEntry                      OBJECT-TYPE
    SYNTAX      SapPbbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "PBB I-Component instance-specific information about a specific SAP in
         the B-Component instance.

         Entries in this table can be created or deleted via SNMP operations."
    INDEX       {
        sapPbbSvcIdIVpls,
        sapPbbSvcIdBVpls,
        sapPbbPortId,
        sapPbbEncapValue
    }
    ::= { sapPbbTable 1 }

SapPbbEntry                      ::= SEQUENCE
{
    sapPbbSvcIdIVpls                 TmnxServId,
    sapPbbSvcIdBVpls                 TmnxServId,
    sapPbbPortId                     TmnxPortID,
    sapPbbEncapValue                 TmnxEncapVal,
    sapPbbRowStatus                  RowStatus,
    sapPbbLastMgmtChange             TimeStamp,
    sapPbbIgmpSnpgMRouter            TruthValue,
    sapPbbMldSnpgMRouter             TruthValue
}

sapPbbSvcIdIVpls                 OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapPbbSvcIdIVpls specifies the Service
         identifier of the I-Component instance."
    ::= { sapPbbEntry 1 }

sapPbbSvcIdBVpls                 OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapPbbSvcIdBVpls specifies the Service
         identifier of the B-Component instance."
    ::= { sapPbbEntry 2 }

sapPbbPortId                     OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapPbbPortId specifies the ID of the access
         port in the B-Component instance where this SAP is defined."
    ::= { sapPbbEntry 3 }

sapPbbEncapValue                 OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapPbbEncapValue specifies the value of the
         label used to identify this SAP in the B-Component instance on the
         access port specified by sapPortId."
    ::= { sapPbbEntry 4 }

sapPbbRowStatus                  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapPbbRowStatus specifies the row status of this row.

         The only values supported during a set operation are 'createAndGo' and
         'destroy'."
    ::= { sapPbbEntry 5 }

sapPbbLastMgmtChange             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPbbLastMgmtChange indicates the sysUpTime at the time
         of the most recent management-initiated change to this table row."
    ::= { sapPbbEntry 6 }

sapPbbIgmpSnpgMRouter            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapPbbIgmpSnpgMRouter specifies if a multicast
         router is attached behind this SAP."
    DEFVAL      { false }
    ::= { sapPbbEntry 7 }

sapPbbMldSnpgMRouter             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapPbbMldSnpgMRouter specifies if a multicast
         router is attached behind this SAP."
    DEFVAL      { false }
    ::= { sapPbbEntry 8 }

sapFPropBMacAddrTblLastChgd      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapFPropBMacAddrTblLastChgd indicates the sysUpTime of
         the last modification of sapFPropBMacAddrTable.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, this object contains a zero
         value."
    ::= { tmnxSapObjs 77 }

sapFPropBMacAddrTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapFPropBMacAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapFPropBMacAddrTable contains the optional configured backbone MAC
         (BMac) addresses (or MAC names) for each SAP.  This table extends the
         information in sapBaseInfoTable."
    ::= { tmnxSapObjs 78 }

sapFPropBMacAddrEntry            OBJECT-TYPE
    SYNTAX      SapFPropBMacAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapFPropBMacAddrEntry defines a row in the sapFPropBMacAddrTable.
         The first three index objects reside in sapBaseInfoTable.  Rows
         are created and destroyed using sapFPropBMacAddrRowStatus."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapFPropBMacAddrMacNameOrAddrTag,
        sapFPropBMacAddrMacNameOrAddr
    }
    ::= { sapFPropBMacAddrTable 1 }

SapFPropBMacAddrEntry            ::= SEQUENCE
{
    sapFPropBMacAddrMacNameOrAddrTag INTEGER,
    sapFPropBMacAddrMacNameOrAddr    TNamedItem,
    sapFPropBMacAddrRowStatus        RowStatus
}

sapFPropBMacAddrMacNameOrAddrTag OBJECT-TYPE
    SYNTAX      INTEGER {
        macName (1),
        macAddr (2)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapFPropBMacAddrMacNameOrAddrTag specifies whether
         sapFPropBMacAddrMacNameOrAddr contains a MAC name, or a MAC address."
    ::= { sapFPropBMacAddrEntry 1 }

sapFPropBMacAddrMacNameOrAddr    OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapFPropBMacAddrMacNameOrAddr specifies a MAC name or MAC
         address configured against a <svcId, sapPortId, sapEncapValue> index
         triple.

         When sapFPropBMacAddrMacNameOrAddrTag is 'macName (1)',
         sapFPropBMacAddrMacNameOrAddr must contain a MAC name which is present
         in the svcMacName column of the svcMacNameTable.

         When sapFPropBMacAddrMacNameOrAddrTag is 'macAddr (2)',
         sapFPropBMacAddrMacNameOrAddr must contain a MAC address, encoded in
         network byte order and IEEE 802.3 canonical bit order as defined in
         IEEE Std 802-2001.

         All the MAC addresses configured for a particular SAP (whether
         configured as MAC addresses, or via MAC names) must refer to one
         B-VPLS on the remote system."
    ::= { sapFPropBMacAddrEntry 2 }

sapFPropBMacAddrRowStatus        OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapFPropBMacAddrRowStatus specifies the status of this
         row."
    ::= { sapFPropBMacAddrEntry 3 }

sapIpv6HostInfoTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIpv6HostInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapIpv6HostInfoTable contains IPv6 information related to a
         routed CO subscriber SAP.  This table complements
         sapBaseInfoTable, and contains an entry for each
         routed CO subscriber SAP. Rows in this table
         are created and deleted automatically by the system."
    ::= { tmnxSapObjs 79 }

sapIpv6HostInfoEntry             OBJECT-TYPE
    SYNTAX      SapIpv6HostInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "IPv6 specific information for a routed CO subscriber SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapIpv6HostInfoTable 1 }

SapIpv6HostInfoEntry             ::= SEQUENCE
{
    sapIpv6HostInfoIpoeDhcp6Hosts    Unsigned32,
    sapIpv6HostInfoPppDhcp6Hosts     Unsigned32,
    sapIpv6HostInfoPppSLAACHosts     Unsigned32,
    sapIpv6HostInfoIpoeSLAACHosts    Unsigned32,
    sapIpv6HostInfoStaticHostsUp     Unsigned32
}

sapIpv6HostInfoIpoeDhcp6Hosts    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpv6HostInfoIpoeDhcp6Hosts indicates the
         number of IPoE DHCPv6 hosts for this SAP."
    ::= { sapIpv6HostInfoEntry 1 }

sapIpv6HostInfoPppDhcp6Hosts     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpv6HostInfoPppDhcp6Hosts indicates the
         number of PPP DHCPv6 hosts for this SAP."
    ::= { sapIpv6HostInfoEntry 2 }

sapIpv6HostInfoPppSLAACHosts     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpv6HostInfoPppSLAACHosts indicates the
         number of PPP SLAAC hosts for this SAP."
    ::= { sapIpv6HostInfoEntry 3 }

sapIpv6HostInfoIpoeSLAACHosts    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpv6HostInfoIpoeSLAACHosts indicates the
         number of IPoE SLAAC hosts for this SAP."
    ::= { sapIpv6HostInfoEntry 4 }

sapIpv6HostInfoStaticHostsUp     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapIpv6HostInfoStaticHostsUp indicates the
         number of IPv6 static IPoE hosts for this SAP where the value of
         sapStatHost6AdminStatus is equal to 'up'."
    ::= { sapIpv6HostInfoEntry 5 }

sapIngPlcrCtrlOvrTblLastChgd     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapIngPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to
         the sapIngPlcrCtrlOvrTable."
    ::= { tmnxSapObjs 80 }

sapIngPlcrCtrlOvrTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngPlcrCtrlOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP ingress policer control override
         information."
    ::= { tmnxSapObjs 81 }

sapIngPlcrCtrlOvrEntry           OBJECT-TYPE
    SYNTAX      SapIngPlcrCtrlOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Policer control override information about a specific SAP on the
         ingress side."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapIngPlcrCtrlOvrTable 1 }

SapIngPlcrCtrlOvrEntry           ::= SEQUENCE
{
    sapIngPlcrCtrlOvrRowStatus       RowStatus,
    sapIngPlcrCtrlOvrLastChgd        TimeStamp,
    sapIngPlcrCtrlOvrMaxRate         THPolPIRRateOverride,
    sapIngPlcrCtrlOvrMinMBSSep       TPlcrBurstSizeBytesOverride,
    sapIngPlcrCtrlOvrMaxRateHi       TmnxQosRateHigh32,
    sapIngPlcrCtrlOvrMaxRateLo       TmnxQosRateLow32
}

sapIngPlcrCtrlOvrRowStatus       OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the Row Status of the entry. This allows creation/deletion of
         rows in this table."
    ::= { sapIngPlcrCtrlOvrEntry 1 }

sapIngPlcrCtrlOvrLastChgd        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrLastChgd indicates the timestamp of last
         change to this row in sapIngPlcrCtrlOvrTable."
    ::= { sapIngPlcrCtrlOvrEntry 2 }

sapIngPlcrCtrlOvrMaxRate         OBJECT-TYPE
    SYNTAX      THPolPIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrMaxRate specifies the maximum frame
         based bandwidth limit of this policer override. This object is
         obsoleted in 15.0 release and has been replaced with
         sapIngPlcrCtrlOvrMaxRateHi and sapIngPlcrCtrlOvrMaxRateLo objects."
    DEFVAL      { -2 }
    ::= { sapIngPlcrCtrlOvrEntry 3 }

sapIngPlcrCtrlOvrMinMBSSep       OBJECT-TYPE
    SYNTAX      TPlcrBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrMinMBSSep specifies the minimum amount
         of separation buffer space (in bytes) allowed by this policer
         override."
    DEFVAL      { -2 }
    ::= { sapIngPlcrCtrlOvrEntry 4 }

sapIngPlcrCtrlOvrMaxRateHi       OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrMaxRateHi specifies the upper 32 bits of
         the desired frame based bandwidth limit of this policer override.

         This value should always be set along with sapIngPlcrCtrlOvrMaxRateLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngPlcrCtrlOvrMaxRateHi along with the value of
         sapIngPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapIngPlcrCtrlOvrMaxRateHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967295 }
    ::= { sapIngPlcrCtrlOvrEntry 5 }

sapIngPlcrCtrlOvrMaxRateLo       OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrMaxRateLo specifies the lower 32 bits of
         the desired frame based bandwidth limit of this policer override.

         This value should always be set along with sapIngPlcrCtrlOvrMaxRateHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngPlcrCtrlOvrMaxRateHi along with the value of
         sapIngPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapIngPlcrCtrlOvrMaxRateHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967294 }
    ::= { sapIngPlcrCtrlOvrEntry 6 }

sapIngPlcrCtrlOvrLvlTblLastChgd  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapIngPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change
         to the sapIngPlcrCtrlOvrLvlTable."
    ::= { tmnxSapObjs 82 }

sapIngPlcrCtrlOvrLvlTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngPlcrCtrlOvrLvlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP ingress policer control override information
         for the priority level."
    ::= { tmnxSapObjs 83 }

sapIngPlcrCtrlOvrLvlEntry        OBJECT-TYPE
    SYNTAX      SapIngPlcrCtrlOvrLvlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Policer control priority level override information about a specific
         SAP on the ingress side.

         Entries are created/deleted automatically by the system when entries
         are created/delete in the sapIngPlcrCtrlOvrTable."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tQosPolicerLevel
    }
    ::= { sapIngPlcrCtrlOvrLvlTable 1 }

SapIngPlcrCtrlOvrLvlEntry        ::= SEQUENCE
{
    sapIngPlcrCtrlOvrLvlLastChgd     TimeStamp,
    sapIngPlcrCtrlOvrLvlMBS          TPlcrBurstSizeBytesOverride
}

sapIngPlcrCtrlOvrLvlLastChgd     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrLvlLastChgd indicates the timestamp of
         last change to this row in sapIngPlcrCtrlOvrLvlTable."
    ::= { sapIngPlcrCtrlOvrLvlEntry 1 }

sapIngPlcrCtrlOvrLvlMBS          OBJECT-TYPE
    SYNTAX      TPlcrBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrCtrlOvrLvlMBS specifies the maximum amount of
         cumulative buffer space (in bytes) allowed for this level by the
         policer of this sap."
    DEFVAL      { -2 }
    ::= { sapIngPlcrCtrlOvrLvlEntry 2 }

sapIngPlcrOvrTblLastChgd         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapIngPlcrOvrTblLastChgd indicates the timestamp of last change to the
         sapIngPlcrOvrTable."
    ::= { tmnxSapObjs 86 }

sapIngPlcrOvrTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngPlcrOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP ingress policer control override
         information."
    ::= { tmnxSapObjs 87 }

sapIngPlcrOvrEntry               OBJECT-TYPE
    SYNTAX      SapIngPlcrOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Policer control override information about a specific policer of the
         SAP on the ingress side."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tSapIngPolicerId
    }
    ::= { sapIngPlcrOvrTable 1 }

SapIngPlcrOvrEntry               ::= SEQUENCE
{
    sapIngPlcrOvrRowStatus           RowStatus,
    sapIngPlcrOvrLastChgd            TimeStamp,
    sapIngPlcrOvrAdminPIR            THPolPIRRateOverride,
    sapIngPlcrOvrAdminCIR            THPolCIRRateOverride,
    sapIngPlcrOvrStatMode            TmnxIngPolicerStatModeOverride,
    sapIngPlcrOvrMBS                 TPolicerBurstSizeBytesOverride,
    sapIngPlcrOvrPktOffset           TPerPacketOffsetOvr,
    sapIngPlcrOvrCBS                 TPolicerBurstSizeBytesOverride,
    sapIngPlcrOvrAdminPIRPercent     TPIRPercentOverride,
    sapIngPlcrOvrAdminCIRPercent     TCIRPercentOverride,
    sapIngPlcrOvrAdminPIRHi          TmnxQosRateHigh32,
    sapIngPlcrOvrAdminPIRLo          TmnxQosRateLow32,
    sapIngPlcrOvrAdminCIRHi          TmnxQosRateHigh32,
    sapIngPlcrOvrAdminCIRLo          TmnxQosRateLow32
}

sapIngPlcrOvrRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the Row Status of the entry. This allows creation/deletion of
         rows in this table."
    ::= { sapIngPlcrOvrEntry 1 }

sapIngPlcrOvrLastChgd            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrLastChgd indicates the timestamp of last
         change to this row in sapIngPlcrOvrTable."
    ::= { sapIngPlcrOvrEntry 2 }

sapIngPlcrOvrAdminPIR            OBJECT-TYPE
    SYNTAX      THPolPIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "sapIngPlcrOvrAdminPIR specifies the administrative PIR specified by
         the user.

         This object is obsoleted on 15.1 release and replaced by
         sapIngPlcrOvrAdminPIRHi and sapIngPlcrOvrAdminPIRLo."
    DEFVAL      { -2 }
    ::= { sapIngPlcrOvrEntry 3 }

sapIngPlcrOvrAdminCIR            OBJECT-TYPE
    SYNTAX      THPolCIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "sapIngPlcrOvrAdminCIR specifies the administrative CIR specified by
         the user.

         This object is obsoleted on 15.1 release and replaced by
         sapIngPlcrOvrAdminCIRHi and sapIngPlcrOvrAdminCIRLo."
    DEFVAL      { -2 }
    ::= { sapIngPlcrOvrEntry 4 }

sapIngPlcrOvrStatMode            OBJECT-TYPE
    SYNTAX      TmnxIngPolicerStatModeOverride
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapIngPlcrOvrStatMode specifies the mode of statistics collected by
         this policer on this sap."
    DEFVAL      { noOverride }
    ::= { sapIngPlcrOvrEntry 5 }

sapIngPlcrOvrMBS                 OBJECT-TYPE
    SYNTAX      TPolicerBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapIngPlcrOvrMBS specifies the maximum amount of buffer space (in
         bytes) allowed for the queue by this policer on this sap."
    DEFVAL      { -2 }
    ::= { sapIngPlcrOvrEntry 6 }

sapIngPlcrOvrPktOffset           OBJECT-TYPE
    SYNTAX      TPerPacketOffsetOvr
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapIngPlcrOvrPktOffset specifies the packet byte offset for addition
         of policing information by this policer on this sap."
    DEFVAL      { -128 }
    ::= { sapIngPlcrOvrEntry 7 }

sapIngPlcrOvrCBS                 OBJECT-TYPE
    SYNTAX      TPolicerBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapIngPlcrOvrCBS specifies the amount of reserved buffer space (in
         bytes) for the queue set by this policer on this sap."
    DEFVAL      { -2 }
    ::= { sapIngPlcrOvrEntry 8 }

sapIngPlcrOvrAdminPIRPercent     OBJECT-TYPE
    SYNTAX      TPIRPercentOverride
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrAdminPIRPercent specifies the desired
         administrative PIR value for this policer as a percentage."
    DEFVAL      { -2 }
    ::= { sapIngPlcrOvrEntry 9 }

sapIngPlcrOvrAdminCIRPercent     OBJECT-TYPE
    SYNTAX      TCIRPercentOverride
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrAdminCIRPercent specifies the desired
         administrative CIR value for this policer as a percentage."
    DEFVAL      { -2 }
    ::= { sapIngPlcrOvrEntry 10 }

sapIngPlcrOvrAdminPIRHi          OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrAdminPIRHi specifies the upper 32 bits of
         the administrative PIR specified by the user.

         This value should always be set along with sapIngPlcrOvrAdminPIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngPlcrOvrAdminPIRHi along with the value of
         sapIngPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapIngPlcrOvrAdminPIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminPIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967295 }
    ::= { sapIngPlcrOvrEntry 11 }

sapIngPlcrOvrAdminPIRLo          OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrAdminPIRLo specifies the lower 32 bits of
         the administrative PIR specified by the user.

         This value should always be set along with sapIngPlcrOvrAdminPIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngPlcrOvrAdminPIRHi along with the value of
         sapIngPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapIngPlcrOvrAdminPIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminPIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967294 }
    ::= { sapIngPlcrOvrEntry 12 }

sapIngPlcrOvrAdminCIRHi          OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrAdminCIRHi specifies the upper 32 bits of
         the administrative CIR specified by the user.

         This value should always be set along with sapIngPlcrOvrAdminCIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngPlcrOvrAdminCIRHi along with the value of
         sapIngPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapIngPlcrOvrAdminCIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminCIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967295 }
    ::= { sapIngPlcrOvrEntry 13 }

sapIngPlcrOvrAdminCIRLo          OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngPlcrOvrAdminCIRLo specifies the lower 32 bits of
         the administrative PIR specified by the user.

         This value should always be set along with sapIngPlcrOvrAdminCIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapIngPlcrOvrAdminCIRHi along with the value of
         sapIngPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapIngPlcrOvrAdminCIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrOvrAdminCIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967294 }
    ::= { sapIngPlcrOvrEntry 14 }

sapEgrPlcrCtrlOvrTblLastChgd     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to
         the sapEgrPlcrCtrlOvrTable."
    ::= { tmnxSapObjs 88 }

sapEgrPlcrCtrlOvrTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrPlcrCtrlOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP egress policer control override information."
    ::= { tmnxSapObjs 89 }

sapEgrPlcrCtrlOvrEntry           OBJECT-TYPE
    SYNTAX      SapEgrPlcrCtrlOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Policer control override information about a specific SAP on the
         egress side."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapEgrPlcrCtrlOvrTable 1 }

SapEgrPlcrCtrlOvrEntry           ::= SEQUENCE
{
    sapEgrPlcrCtrlOvrRowStatus       RowStatus,
    sapEgrPlcrCtrlOvrLastChgd        TimeStamp,
    sapEgrPlcrCtrlOvrMaxRate         THPolPIRRateOverride,
    sapEgrPlcrCtrlOvrMinMBSSep       TPlcrBurstSizeBytesOverride,
    sapEgrPlcrCtrlOvrMaxRateHi       TmnxQosRateHigh32,
    sapEgrPlcrCtrlOvrMaxRateLo       TmnxQosRateLow32
}

sapEgrPlcrCtrlOvrRowStatus       OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the Row Status of the entry. This allows creation/deletion of
         rows in this table."
    ::= { sapEgrPlcrCtrlOvrEntry 1 }

sapEgrPlcrCtrlOvrLastChgd        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrLastChgd indicates the timestamp of last
         change to this row in sapEgrPlcrCtrlOvrTable."
    ::= { sapEgrPlcrCtrlOvrEntry 2 }

sapEgrPlcrCtrlOvrMaxRate         OBJECT-TYPE
    SYNTAX      THPolPIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrMaxRate specifies the maximum frame
         based bandwidth limit of this policer override. This object is
         obsoleted in 15.0 release and has been replaced with
         sapEgrPlcrCtrlOvrMaxRateHi and sapEgrPlcrCtrlOvrMaxRateLo objects."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrCtrlOvrEntry 3 }

sapEgrPlcrCtrlOvrMinMBSSep       OBJECT-TYPE
    SYNTAX      TPlcrBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrMinMBSSep specifies the minimum amount
         of separation buffer space (in bytes) allowed by this policer
         override."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrCtrlOvrEntry 4 }

sapEgrPlcrCtrlOvrMaxRateHi       OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrMaxRateHi specifies the upper 32 bits of
         the desired frame based bandwidth limit of this policer override.

         This value should always be set along with sapEgrPlcrCtrlOvrMaxRateLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrPlcrCtrlOvrMaxRateHi along with the value of
         sapEgrPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapEgrPlcrCtrlOvrMaxRateHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967295 }
    ::= { sapEgrPlcrCtrlOvrEntry 5 }

sapEgrPlcrCtrlOvrMaxRateLo       OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrMaxRateLo specifies the lower 32 bits of
         the desired frame based bandwidth limit of this policer override.

         This value should always be set along with sapEgrPlcrCtrlOvrMaxRateHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrPlcrCtrlOvrMaxRateHi along with the value of
         sapEgrPlcrCtrlOvrMaxRateLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapEgrPlcrCtrlOvrMaxRateHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapIngPlcrCtrlOvrMaxRateLo set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967294 }
    ::= { sapEgrPlcrCtrlOvrEntry 6 }

sapEgrPlcrCtrlOvrLvlTblLastChgd  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change
         to the sapEgrPlcrCtrlOvrLvlTable."
    ::= { tmnxSapObjs 90 }

sapEgrPlcrCtrlOvrLvlTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrPlcrCtrlOvrLvlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP egress policer control override information
         for the priority level."
    ::= { tmnxSapObjs 91 }

sapEgrPlcrCtrlOvrLvlEntry        OBJECT-TYPE
    SYNTAX      SapEgrPlcrCtrlOvrLvlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Policer control priority level override information about a specific
         SAP on the egress side.

         Entries are created/deleted automatically by the system when entries
         are created/delete in the sapEgrPlcrCtrlOvrTable."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tQosPolicerLevel
    }
    ::= { sapEgrPlcrCtrlOvrLvlTable 1 }

SapEgrPlcrCtrlOvrLvlEntry        ::= SEQUENCE
{
    sapEgrPlcrCtrlOvrLvlLastChgd     TimeStamp,
    sapEgrPlcrCtrlOvrLvlMBS          TPlcrBurstSizeBytesOverride
}

sapEgrPlcrCtrlOvrLvlLastChgd     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrLvlLastChgd indicates the timestamp of
         last change to this row in sapEgrPlcrCtrlOvrLvlTable."
    ::= { sapEgrPlcrCtrlOvrLvlEntry 1 }

sapEgrPlcrCtrlOvrLvlMBS          OBJECT-TYPE
    SYNTAX      TPlcrBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrCtrlOvrLvlMBS specifies the maximum amount of
         cumulative buffer space (in bytes) allowed for this level by the
         policer of this sap."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrCtrlOvrLvlEntry 2 }

sapEgrPlcrOvrTblLastChgd         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrOvrTblLastChgd indicates the timestamp of last change to the
         sapEgrPlcrOvrTable."
    ::= { tmnxSapObjs 94 }

sapEgrPlcrOvrTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrPlcrOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP egress policer control override information."
    ::= { tmnxSapObjs 95 }

sapEgrPlcrOvrEntry               OBJECT-TYPE
    SYNTAX      SapEgrPlcrOvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Policer control override information about a specific policer of the
         SAP on the egress side."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tSapEgrPolicerId
    }
    ::= { sapEgrPlcrOvrTable 1 }

SapEgrPlcrOvrEntry               ::= SEQUENCE
{
    sapEgrPlcrOvrRowStatus           RowStatus,
    sapEgrPlcrOvrLastChgd            TimeStamp,
    sapEgrPlcrOvrAdminPIR            THPolPIRRateOverride,
    sapEgrPlcrOvrAdminCIR            THPolCIRRateOverride,
    sapEgrPlcrOvrStatMode            TmnxEgrPolicerStatModeOverride,
    sapEgrPlcrOvrMBS                 TPolicerBurstSizeBytesOverride,
    sapEgrPlcrOvrPktOffset           TEgressPerPacketOffsetOvr,
    sapEgrPlcrOvrCBS                 TPolicerBurstSizeBytesOverride,
    sapEgrPlcrOvrAdminPIRPercent     TPIRPercentOverride,
    sapEgrPlcrOvrAdminCIRPercent     TCIRPercentOverride,
    sapEgrPlcrOvrAdminPIRHi          TmnxQosRateHigh32,
    sapEgrPlcrOvrAdminPIRLo          TmnxQosRateLow32,
    sapEgrPlcrOvrAdminCIRHi          TmnxQosRateHigh32,
    sapEgrPlcrOvrAdminCIRLo          TmnxQosRateLow32
}

sapEgrPlcrOvrRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the Row Status of the entry. This allows creation/deletion of
         rows in this table."
    ::= { sapEgrPlcrOvrEntry 1 }

sapEgrPlcrOvrLastChgd            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrLastChgd indicates the timestamp of last
         change to this row in sapEgrPlcrOvrTable."
    ::= { sapEgrPlcrOvrEntry 2 }

sapEgrPlcrOvrAdminPIR            OBJECT-TYPE
    SYNTAX      THPolPIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "sapEgrPlcrOvrAdminPIR specifies the administrative PIR specified by
         the user.

         This object is obsoleted on 15.1 release and replaced by
         sapEgrPlcrOvrAdminPIRHi and sapEgrPlcrOvrAdminPIRLo."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrOvrEntry 3 }

sapEgrPlcrOvrAdminCIR            OBJECT-TYPE
    SYNTAX      THPolCIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "sapEgrPlcrOvrAdminCIR specifies the administrative CIR specified by
         the user.

         This object is obsoleted on 15.1 release and replaced by
         sapEgrPlcrOvrAdminCIRHi and sapEgrPlcrOvrAdminCIRLo."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrOvrEntry 4 }

sapEgrPlcrOvrStatMode            OBJECT-TYPE
    SYNTAX      TmnxEgrPolicerStatModeOverride
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrOvrStatMode specifies the mode of statistics collected by
         this policer on this sap."
    DEFVAL      { noOverride }
    ::= { sapEgrPlcrOvrEntry 5 }

sapEgrPlcrOvrMBS                 OBJECT-TYPE
    SYNTAX      TPolicerBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrOvrMBS specifies the maximum amount of buffer space (in
         bytes) allowed for the queue by this policer on this sap."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrOvrEntry 6 }

sapEgrPlcrOvrPktOffset           OBJECT-TYPE
    SYNTAX      TEgressPerPacketOffsetOvr
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrOvrPktOffset specifies the packet byte offset for addition
         of policing information by this policer on this sap."
    DEFVAL      { -128 }
    ::= { sapEgrPlcrOvrEntry 7 }

sapEgrPlcrOvrCBS                 OBJECT-TYPE
    SYNTAX      TPolicerBurstSizeBytesOverride
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "sapEgrPlcrOvrCBS specifies the amount of reserved buffer space (in
         bytes) for the queue set by this policer on this sap."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrOvrEntry 8 }

sapEgrPlcrOvrAdminPIRPercent     OBJECT-TYPE
    SYNTAX      TPIRPercentOverride
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrAdminPIRPercent specifies the desired
         administrative PIR value for this policer as a percentage."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrOvrEntry 9 }

sapEgrPlcrOvrAdminCIRPercent     OBJECT-TYPE
    SYNTAX      TCIRPercentOverride
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrAdminCIRPercent specifies the desired
         administrative CIR value for this policer as a percentage."
    DEFVAL      { -2 }
    ::= { sapEgrPlcrOvrEntry 10 }

sapEgrPlcrOvrAdminPIRHi          OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrAdminPIRHi specifies the upper 32 bits of
         the administrative PIR specified by the user.

         This value should always be set along with sapEgrPlcrOvrAdminPIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrPlcrOvrAdminPIRHi along with the value of
         sapEgrPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapEgrPlcrOvrAdminPIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminPIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967295 }
    ::= { sapEgrPlcrOvrEntry 11 }

sapEgrPlcrOvrAdminPIRLo          OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrAdminPIRLo specifies the lower 32 bits of
         the administrative PIR specified by the user.

         This value should always be set along with sapEgrPlcrOvrAdminPIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrPlcrOvrAdminPIRHi along with the value of
         sapEgrPlcrOvrAdminPIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapEgrPlcrOvrAdminPIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminPIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967294 }
    ::= { sapEgrPlcrOvrEntry 12 }

sapEgrPlcrOvrAdminCIRHi          OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrAdminCIRHi specifies the upper 32 bits of
         the administrative CIR specified by the user.

         This value should always be set along with sapEgrPlcrOvrAdminCIRLo,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrPlcrOvrAdminCIRHi along with the value of
         sapEgrPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapEgrPlcrOvrAdminCIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminCIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967295 }
    ::= { sapEgrPlcrOvrEntry 13 }

sapEgrPlcrOvrAdminCIRLo          OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrPlcrOvrAdminCIRLo specifies the lower 32 bits of
         the administrative PIR specified by the user.

         This value should always be set along with sapEgrPlcrOvrAdminCIRHi,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrPlcrOvrAdminCIRHi along with the value of
         sapEgrPlcrOvrAdminCIRLo is set to 4294967295 (0xFFFFFFFF), rate for
         this policer indicates maximum rate.

         When the value of sapEgrPlcrOvrAdminCIRHi is set to 4294967295
         (0xFFFFFFFF) and the value of sapEgrPlcrOvrAdminCIRLo is set to
         4294967294 (0xFFFFFFFE), rate for this policer indicates no override."
    DEFVAL      { 4294967294 }
    ::= { sapEgrPlcrOvrEntry 14 }

sapIngQosPolicerStatsTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ingress QoS policer SAP statistics."
    ::= { tmnxSapObjs 96 }

sapIngQosPolicerStatsEntry       OBJECT-TYPE
    SYNTAX      SapIngQosPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS policer."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosPStatsPolId
    }
    ::= { sapIngQosPolicerStatsTable 1 }

SapIngQosPolicerStatsEntry       ::= SEQUENCE
{
    sapIngQosPStatsPolId             TIngressPolicerId,
    sapIngQosPStatsCustId            TmnxCustId,
    sapIngQosPStatsMode              TmnxIngPolicerStatMode,
    sapIngQosPStatsOffHiPrioPkts     Counter64,
    sapIngQosPStatsOffHiPrioPktsLo   Counter32,
    sapIngQosPStatsOffHiPrioPktsHi   Counter32,
    sapIngQosPStatsDrpHiPrioPkts     Counter64,
    sapIngQosPStatsDrpHiPrioPktsLo   Counter32,
    sapIngQosPStatsDrpHiPrioPktsHi   Counter32,
    sapIngQosPStatsOffLoPrioPkts     Counter64,
    sapIngQosPStatsOffLoPrioPktsLo   Counter32,
    sapIngQosPStatsOffLoPrioPktsHi   Counter32,
    sapIngQosPStatsDrpLoPrioPkts     Counter64,
    sapIngQosPStatsDrpLoPrioPktsLo   Counter32,
    sapIngQosPStatsDrpLoPrioPktsHi   Counter32,
    sapIngQosPStatsOffHiPrioOcts     Counter64,
    sapIngQosPStatsOffHiPrioOctsLo   Counter32,
    sapIngQosPStatsOffHiPrioOctsHi   Counter32,
    sapIngQosPStatsDrpHiPrioOcts     Counter64,
    sapIngQosPStatsDrpHiPrioOctsLo   Counter32,
    sapIngQosPStatsDrpHiPrioOctsHi   Counter32,
    sapIngQosPStatsOffLoPrioOcts     Counter64,
    sapIngQosPStatsOffLoPrioOctsLo   Counter32,
    sapIngQosPStatsOffLoPrioOctsHi   Counter32,
    sapIngQosPStatsDrpLoPrioOcts     Counter64,
    sapIngQosPStatsDrpLoPrioOctsLo   Counter32,
    sapIngQosPStatsDrpLoPrioOctsHi   Counter32,
    sapIngQosPStatsFwdInProfPkts     Counter64,
    sapIngQosPStatsFwdInProfPktsLo   Counter32,
    sapIngQosPStatsFwdInProfPktsHi   Counter32,
    sapIngQosPStatsFwdOutProfPkts    Counter64,
    sapIngQosPStatsFwdOutProfPktsLo  Counter32,
    sapIngQosPStatsFwdOutProfPktsHi  Counter32,
    sapIngQosPStatsFwdInProfOcts     Counter64,
    sapIngQosPStatsFwdInProfOctsLo   Counter32,
    sapIngQosPStatsFwdInProfOctsHi   Counter32,
    sapIngQosPStatsFwdOutProfOcts    Counter64,
    sapIngQosPStatsFwdOutProfOctsLo  Counter32,
    sapIngQosPStatsFwdOutProfOctsHi  Counter32,
    sapIngQosPStatsUncolPktsOff      Counter64,
    sapIngQosPStatsUncolPktsOffLo    Counter32,
    sapIngQosPStatsUncolPktsOffHi    Counter32,
    sapIngQosPStatsUncolOctsOff      Counter64,
    sapIngQosPStatsUncolOctsOffLo    Counter32,
    sapIngQosPStatsUncolOctsOffHi    Counter32,
    sapIngQosPStatsDrpExdProfPkts    Counter64,
    sapIngQosPStatsDrpExdProfOcts    Counter64
}

sapIngQosPStatsPolId             OBJECT-TYPE
    SYNTAX      TIngressPolicerId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of the ingress QoS policer of this SAP."
    ::= { sapIngQosPolicerStatsEntry 1 }

sapIngQosPStatsCustId            OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapIngQosPolicerStatsEntry 2 }

sapIngQosPStatsMode              OBJECT-TYPE
    SYNTAX      TmnxIngPolicerStatMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosPStatsMode indicates the stat mode used by the
         policer."
    ::= { sapIngQosPolicerStatsEntry 3 }

sapIngQosPStatsOffHiPrioPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority packets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosPolicerStatsEntry 4 }

sapIngQosPStatsOffHiPrioPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsOffHiPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 5 }

sapIngQosPStatsOffHiPrioPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsOffHiPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 6 }

sapIngQosPStatsDrpHiPrioPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority packets, as determined by the SAP ingress
         QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosPolicerStatsEntry 7 }

sapIngQosPStatsDrpHiPrioPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsDrpHiPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 8 }

sapIngQosPStatsDrpHiPrioPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsDrpHiPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 9 }

sapIngQosPStatsOffLoPrioPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority packets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosPolicerStatsEntry 10 }

sapIngQosPStatsOffLoPrioPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsOffLoPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 11 }

sapIngQosPStatsOffLoPrioPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsOffLoPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 12 }

sapIngQosPStatsDrpLoPrioPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority packets, as determined by the SAP ingress
         QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosPolicerStatsEntry 13 }

sapIngQosPStatsDrpLoPrioPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsDrpLoPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 14 }

sapIngQosPStatsDrpLoPrioPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsDrpLoPrioPkts."
    ::= { sapIngQosPolicerStatsEntry 15 }

sapIngQosPStatsOffHiPrioOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority octets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosPolicerStatsEntry 16 }

sapIngQosPStatsOffHiPrioOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsOffHiPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 17 }

sapIngQosPStatsOffHiPrioOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsOffHiPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 18 }

sapIngQosPStatsDrpHiPrioOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of high priority octets, as determined by the SAP ingress
         QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosPolicerStatsEntry 19 }

sapIngQosPStatsDrpHiPrioOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsDrpHiPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 20 }

sapIngQosPStatsDrpHiPrioOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsDrpHiPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 21 }

sapIngQosPStatsOffLoPrioOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority octets, as determined by the SAP ingress
         QoS policy, offered by the Pchip to the Pchip."
    ::= { sapIngQosPolicerStatsEntry 22 }

sapIngQosPStatsOffLoPrioOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsOffLoPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 23 }

sapIngQosPStatsOffLoPrioOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsOffLoPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 24 }

sapIngQosPStatsDrpLoPrioOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of low priority octets, as determined by the SAP ingress
         QoS policy, dropped by the Pchip due to: MBS exceeded, buffer pool
         limit exceeded, etc."
    ::= { sapIngQosPolicerStatsEntry 25 }

sapIngQosPStatsDrpLoPrioOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsDrpLoPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 26 }

sapIngQosPStatsDrpLoPrioOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsDrpLoPrioOcts."
    ::= { sapIngQosPolicerStatsEntry 27 }

sapIngQosPStatsFwdInProfPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) forwarded by the
         ingress Pchip."
    ::= { sapIngQosPolicerStatsEntry 28 }

sapIngQosPStatsFwdInProfPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsFwdInProfPkts."
    ::= { sapIngQosPolicerStatsEntry 29 }

sapIngQosPStatsFwdInProfPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsFwdInProfPkts."
    ::= { sapIngQosPolicerStatsEntry 30 }

sapIngQosPStatsFwdOutProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) forwarded by the
         ingress Pchip."
    ::= { sapIngQosPolicerStatsEntry 31 }

sapIngQosPStatsFwdOutProfPktsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsFwdOutProfPkts."
    ::= { sapIngQosPolicerStatsEntry 32 }

sapIngQosPStatsFwdOutProfPktsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsFwdOutProfPkts."
    ::= { sapIngQosPolicerStatsEntry 33 }

sapIngQosPStatsFwdInProfOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) forwarded by the
         ingress Pchip."
    ::= { sapIngQosPolicerStatsEntry 34 }

sapIngQosPStatsFwdInProfOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsFwdInProfOcts."
    ::= { sapIngQosPolicerStatsEntry 35 }

sapIngQosPStatsFwdInProfOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsFwdInProfOcts."
    ::= { sapIngQosPolicerStatsEntry 36 }

sapIngQosPStatsFwdOutProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         ingress Pchip."
    ::= { sapIngQosPolicerStatsEntry 37 }

sapIngQosPStatsFwdOutProfOctsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsFwdOutProfOcts."
    ::= { sapIngQosPolicerStatsEntry 38 }

sapIngQosPStatsFwdOutProfOctsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsFwdOutProfOcts."
    ::= { sapIngQosPolicerStatsEntry 39 }

sapIngQosPStatsUncolPktsOff      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored packets offered to the ingress Pchip."
    ::= { sapIngQosPolicerStatsEntry 40 }

sapIngQosPStatsUncolPktsOffLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsUncolPktsOff."
    ::= { sapIngQosPolicerStatsEntry 41 }

sapIngQosPStatsUncolPktsOffHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsUncolPktsOff."
    ::= { sapIngQosPolicerStatsEntry 42 }

sapIngQosPStatsUncolOctsOff      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored octets offered to the ingress Pchip."
    ::= { sapIngQosPolicerStatsEntry 43 }

sapIngQosPStatsUncolOctsOffLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsUncolOctsOff."
    ::= { sapIngQosPolicerStatsEntry 44 }

sapIngQosPStatsUncolOctsOffHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsUncolOctsOff."
    ::= { sapIngQosPolicerStatsEntry 45 }

sapIngQosPStatsDrpExdProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosPStatsDrpExdProfPkts indicates the number of
         exceed-profile packets dropped."
    ::= { sapIngQosPolicerStatsEntry 46 }

sapIngQosPStatsDrpExdProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosPStatsDrpExdProfOcts indicates the number of
         exceed-profile octets dropped."
    ::= { sapIngQosPolicerStatsEntry 47 }

sapEgrQosPolicerStatsTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains egress QoS policer SAP statistics."
    ::= { tmnxSapObjs 97 }

sapEgrQosPolicerStatsEntry       OBJECT-TYPE
    SYNTAX      SapEgrQosPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS policer."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosPStatsPolId
    }
    ::= { sapEgrQosPolicerStatsTable 1 }

SapEgrQosPolicerStatsEntry       ::= SEQUENCE
{
    sapEgrQosPStatsPolId             TEgressPolicerId,
    sapEgrQosPStatsCustId            TmnxCustId,
    sapEgrQosPStatsMode              TmnxEgrPolicerStatMode,
    sapEgrQosPStatsOffInProfPkts     Counter64,
    sapEgrQosPStatsOffInProfPktsLo   Counter32,
    sapEgrQosPStatsOffInProfPktsHi   Counter32,
    sapEgrQosPStatsFwdInProfPkts     Counter64,
    sapEgrQosPStatsFwdInProfPktsLo   Counter32,
    sapEgrQosPStatsFwdInProfPktsHi   Counter32,
    sapEgrQosPStatsDrpInProfPkts     Counter64,
    sapEgrQosPStatsDrpInProfPktsLo   Counter32,
    sapEgrQosPStatsDrpInProfPktsHi   Counter32,
    sapEgrQosPStatsOffOutProfPkts    Counter64,
    sapEgrQosPStatsOffOutProfPktsLo  Counter32,
    sapEgrQosPStatsOffOutProfPktsHi  Counter32,
    sapEgrQosPStatsFwdOutProfPkts    Counter64,
    sapEgrQosPStatsFwdOutProfPktsLo  Counter32,
    sapEgrQosPStatsFwdOutProfPktsHi  Counter32,
    sapEgrQosPStatsDrpOutProfPkts    Counter64,
    sapEgrQosPStatsDrpOutProfPktsLo  Counter32,
    sapEgrQosPStatsDrpOutProfPktsHi  Counter32,
    sapEgrQosPStatsOffInProfOcts     Counter64,
    sapEgrQosPStatsOffInProfOctsLo   Counter32,
    sapEgrQosPStatsOffInProfOctsHi   Counter32,
    sapEgrQosPStatsFwdInProfOcts     Counter64,
    sapEgrQosPStatsFwdInProfOctsLo   Counter32,
    sapEgrQosPStatsFwdInProfOctsHi   Counter32,
    sapEgrQosPStatsDrpInProfOcts     Counter64,
    sapEgrQosPStatsDrpInProfOctsLo   Counter32,
    sapEgrQosPStatsDrpInProfOctsHi   Counter32,
    sapEgrQosPStatsOffOutProfOcts    Counter64,
    sapEgrQosPStatsOffOutProfOctsLo  Counter32,
    sapEgrQosPStatsOffOutProfOctsHi  Counter32,
    sapEgrQosPStatsFwdOutProfOcts    Counter64,
    sapEgrQosPStatsFwdOutProfOctsLo  Counter32,
    sapEgrQosPStatsFwdOutProfOctsHi  Counter32,
    sapEgrQosPStatsDrpOutProfOcts    Counter64,
    sapEgrQosPStatsDrpOutProfOctsLo  Counter32,
    sapEgrQosPStatsDrpOutProfOctsHi  Counter32,
    sapEgrQosPStatsUncolPktsOff      Counter64,
    sapEgrQosPStatsUncolPktsOffLo    Counter32,
    sapEgrQosPStatsUncolPktsOffHi    Counter32,
    sapEgrQosPStatsUncolOctsOff      Counter64,
    sapEgrQosPStatsUncolOctsOffLo    Counter32,
    sapEgrQosPStatsUncolOctsOffHi    Counter32,
    sapEgrQosPStatsFwdExdProfPkts    Counter64,
    sapEgrQosPStatsDrpExdProfPkts    Counter64,
    sapEgrQosPStatsFwdExdProfOcts    Counter64,
    sapEgrQosPStatsDrpExdProfOcts    Counter64,
    sapEgrQosPStatsOffExdProfPkts    Counter64,
    sapEgrQosPStatsOffExdProfOcts    Counter64,
    sapEgrQosPStatsOffInPlusProfPkts Counter64,
    sapEgrQosPStatsFwdInPlusProfPkts Counter64,
    sapEgrQosPStatsDrpInPlusProfPkts Counter64,
    sapEgrQosPStatsOffInPlusProfOcts Counter64,
    sapEgrQosPStatsFwdInPlusProfOcts Counter64,
    sapEgrQosPStatsDrpInPlusProfOcts Counter64
}

sapEgrQosPStatsPolId             OBJECT-TYPE
    SYNTAX      TEgressPolicerId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of the egress QoS queue of this SAP."
    ::= { sapEgrQosPolicerStatsEntry 1 }

sapEgrQosPStatsCustId            OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Customer ID for the associated service."
    ::= { sapEgrQosPolicerStatsEntry 2 }

sapEgrQosPStatsMode              OBJECT-TYPE
    SYNTAX      TmnxEgrPolicerStatMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsMode indicates the stat mode used by the
         policer."
    ::= { sapEgrQosPolicerStatsEntry 3 }

sapEgrQosPStatsOffInProfPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) offered by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 4 }

sapEgrQosPStatsOffInProfPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsOffInProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 5 }

sapEgrQosPStatsOffInProfPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsOffInProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 6 }

sapEgrQosPStatsFwdInProfPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets (rate below CIR) forwarded by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 7 }

sapEgrQosPStatsFwdInProfPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsFwdInProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 8 }

sapEgrQosPStatsFwdInProfPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsFwdInProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 9 }

sapEgrQosPStatsDrpInProfPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile packets discarded by the egress Pchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPolicerStatsEntry 10 }

sapEgrQosPStatsDrpInProfPktsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsDrpInProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 11 }

sapEgrQosPStatsDrpInProfPktsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsDrpInProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 12 }

sapEgrQosPStatsOffOutProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) offered by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 13 }

sapEgrQosPStatsOffOutProfPktsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsOffOutProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 14 }

sapEgrQosPStatsOffOutProfPktsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsOffOutProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 15 }

sapEgrQosPStatsFwdOutProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets (rate above CIR) forwarded by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 16 }

sapEgrQosPStatsFwdOutProfPktsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsFwdOutProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 17 }

sapEgrQosPStatsFwdOutProfPktsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsFwdOutProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 18 }

sapEgrQosPStatsDrpOutProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile packets discarded by the egress Pchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPolicerStatsEntry 19 }

sapEgrQosPStatsDrpOutProfPktsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsDrpOutProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 20 }

sapEgrQosPStatsDrpOutProfPktsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsDrpOutProfPkts."
    ::= { sapEgrQosPolicerStatsEntry 21 }

sapEgrQosPStatsOffInProfOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) offered by the egress
         Pchip."
    ::= { sapEgrQosPolicerStatsEntry 22 }

sapEgrQosPStatsOffInProfOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsOffInProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 23 }

sapEgrQosPStatsOffInProfOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsOffInProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 24 }

sapEgrQosPStatsFwdInProfOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets (rate below CIR) forwarded by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 25 }

sapEgrQosPStatsFwdInProfOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsFwdInProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 26 }

sapEgrQosPStatsFwdInProfOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsFwdInProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 27 }

sapEgrQosPStatsDrpInProfOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of in-profile octets discarded by the egress Pchip due to:
         MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPolicerStatsEntry 28 }

sapEgrQosPStatsDrpInProfOctsLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsDrpInProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 29 }

sapEgrQosPStatsDrpInProfOctsHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsDrpInProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 30 }

sapEgrQosPStatsOffOutProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 31 }

sapEgrQosPStatsOffOutProfOctsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsOffOutProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 32 }

sapEgrQosPStatsOffOutProfOctsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsOffOutProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 33 }

sapEgrQosPStatsFwdOutProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets (rate above CIR) forwarded by the
         egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 34 }

sapEgrQosPStatsFwdOutProfOctsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsFwdOutProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 35 }

sapEgrQosPStatsFwdOutProfOctsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsFwdOutProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 36 }

sapEgrQosPStatsDrpOutProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of out-of-profile octets discarded by the egress Pchip due
         to: MBS exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPolicerStatsEntry 37 }

sapEgrQosPStatsDrpOutProfOctsLo  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapEgrQosPStatsDrpOutProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 38 }

sapEgrQosPStatsDrpOutProfOctsHi  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapEgrQosPStatsDrpOutProfOcts."
    ::= { sapEgrQosPolicerStatsEntry 39 }

sapEgrQosPStatsUncolPktsOff      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored packets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 40 }

sapEgrQosPStatsUncolPktsOffLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsUncolPktsOff."
    ::= { sapEgrQosPolicerStatsEntry 41 }

sapEgrQosPStatsUncolPktsOffHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsUncolPktsOff."
    ::= { sapEgrQosPolicerStatsEntry 42 }

sapEgrQosPStatsUncolOctsOff      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of uncolored octets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 43 }

sapEgrQosPStatsUncolOctsOffLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Lower 32 bits of sapIngQosPStatsUncolOctsOff."
    ::= { sapEgrQosPolicerStatsEntry 44 }

sapEgrQosPStatsUncolOctsOffHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Upper 32 bits of sapIngQosPStatsUncolOctsOff."
    ::= { sapEgrQosPolicerStatsEntry 45 }

sapEgrQosPStatsFwdExdProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsFwdExdProfPkts indicates the number of
         exceed-profile packets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 46 }

sapEgrQosPStatsDrpExdProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsDrpExdProfPkts indicates the number of
         exceed-profile packets discarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 47 }

sapEgrQosPStatsFwdExdProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsFwdExdProfOcts indicates the number of
         exceed-profile octets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 48 }

sapEgrQosPStatsDrpExdProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsDrpExdProfOcts indicates the number of
         exceed-profile octets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 49 }

sapEgrQosPStatsOffExdProfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsOffExdProfPkts indicates the number of
         exceed-profile packets offered by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 50 }

sapEgrQosPStatsOffExdProfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsOffExdProfOcts indicates the number of
         exceed-profile octets offered by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 51 }

sapEgrQosPStatsOffInPlusProfPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsOffInPlusProfPkts indicates the number of
         inplus-profile packets offered by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 52 }

sapEgrQosPStatsFwdInPlusProfPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsFwdInPlusProfPkts indicates the number of
         inplus-profile packets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 53 }

sapEgrQosPStatsDrpInPlusProfPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsDrpInPlusProfPkts indicates the number of
         inplus-profile packets discarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 54 }

sapEgrQosPStatsOffInPlusProfOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsOffInPlusProfOcts indicates the number of
         inplus-profile octets offered by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 55 }

sapEgrQosPStatsFwdInPlusProfOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsFwdInPlusProfOcts indicates the number of
         inplus-profile octets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 56 }

sapEgrQosPStatsDrpInPlusProfOcts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosPStatsDrpInPlusProfOcts indicates the number of
         inplus-profile octets forwarded by the egress Pchip."
    ::= { sapEgrQosPolicerStatsEntry 57 }

sapIngQosPlcyPolicerStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosPlcyPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains ingress QoS policer SAP statistics, per Ingress
         QoS Policy the policer was used by.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 98 }

sapIngQosPlcyPolicerStatsEntry   OBJECT-TYPE
    SYNTAX      SapIngQosPlcyPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Ingress statistics about a specific SAP's QoS policer for a given Qos
         policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIgQosPlcyPStatPlcyId,
        sapIgQosPlcyPStatPolId
    }
    ::= { sapIngQosPlcyPolicerStatsTable 1 }

SapIngQosPlcyPolicerStatsEntry   ::= SEQUENCE
{
    sapIgQosPlcyPStatPlcyId          TSapIngressPolicyID,
    sapIgQosPlcyPStatPolId           TIngPolicerId,
    sapIgQosPlcyPStatCustId          TmnxCustId,
    sapIgQosPlcyPStatMode            TmnxIngPolicerStatMode,
    sapIgQosPlcyPStatOffHiPrioPkts   Counter64,
    sapIgQosPlcyPStatOffHiPrioPktsL  Counter32,
    sapIgQosPlcyPStatOffHiPrioPktsH  Counter32,
    sapIgQosPlcyPStatDrpHiPrioPkts   Counter64,
    sapIgQosPlcyPStatDrpHiPrioPktsL  Counter32,
    sapIgQosPlcyPStatDrpHiPrioPktsH  Counter32,
    sapIgQosPlcyPStatOffLoPrioPkts   Counter64,
    sapIgQosPlcyPStatOffLoPrioPktsL  Counter32,
    sapIgQosPlcyPStatOffLoPrioPktsH  Counter32,
    sapIgQosPlcyPStatDrpLoPrioPkts   Counter64,
    sapIgQosPlcyPStatDrpLoPrioPktsL  Counter32,
    sapIgQosPlcyPStatDrpLoPrioPktsH  Counter32,
    sapIgQosPlcyPStatOffHiPrioOcts   Counter64,
    sapIgQosPlcyPStatOffHiPrioOctsL  Counter32,
    sapIgQosPlcyPStatOffHiPrioOctsH  Counter32,
    sapIgQosPlcyPStatDrpHiPrioOcts   Counter64,
    sapIgQosPlcyPStatDrpHiPrioOctsL  Counter32,
    sapIgQosPlcyPStatDrpHiPrioOctsH  Counter32,
    sapIgQosPlcyPStatOffLoPrioOcts   Counter64,
    sapIgQosPlcyPStatOffLoPrioOctsL  Counter32,
    sapIgQosPlcyPStatOffLoPrioOctsH  Counter32,
    sapIgQosPlcyPStatDrpLoPrioOcts   Counter64,
    sapIgQosPlcyPStatDrpLoPrioOctsL  Counter32,
    sapIgQosPlcyPStatDrpLoPrioOctsH  Counter32,
    sapIgQosPlcyPStatFwdInProfPkts   Counter64,
    sapIgQosPlcyPStatFwdInProfPktsL  Counter32,
    sapIgQosPlcyPStatFwdInProfPktsH  Counter32,
    sapIgQosPlcyPStatFwdOutProfPkts  Counter64,
    sapIgQosPlcyPStatFwdOutProfPktsL Counter32,
    sapIgQosPlcyPStatFwdOutProfPktsH Counter32,
    sapIgQosPlcyPStatFwdInProfOcts   Counter64,
    sapIgQosPlcyPStatFwdInProfOctsL  Counter32,
    sapIgQosPlcyPStatFwdInProfOctsH  Counter32,
    sapIgQosPlcyPStatFwdOutProfOcts  Counter64,
    sapIgQosPlcyPStatFwdOutProfOctsL Counter32,
    sapIgQosPlcyPStatFwdOutProfOctsH Counter32,
    sapIgQosPlcyPStatUncolPktsOff    Counter64,
    sapIgQosPlcyPStatUncolPktsOffL   Counter32,
    sapIgQosPlcyPStatUncolPktsOffH   Counter32,
    sapIgQosPlcyPStatUncolOctsOff    Counter64,
    sapIgQosPlcyPStatUncolOctsOffL   Counter32,
    sapIgQosPlcyPStatUncolOctsOffH   Counter32
}

sapIgQosPlcyPStatPlcyId          OBJECT-TYPE
    SYNTAX      TSapIngressPolicyID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The row index in the tSapIngressTable corresponding to this ingress
         QoS policy."
    ::= { sapIngQosPlcyPolicerStatsEntry 1 }

sapIgQosPlcyPStatPolId           OBJECT-TYPE
    SYNTAX      TIngPolicerId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The index of the ingress QoS policer of this SAP used by the policy
         indicated by sapIgQosPlcyPStatPlcyId."
    ::= { sapIngQosPlcyPolicerStatsEntry 2 }

sapIgQosPlcyPStatCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapIgQosPlcyPStatCustId indicates the Customer
         ID for the associated service."
    ::= { sapIngQosPlcyPolicerStatsEntry 3 }

sapIgQosPlcyPStatMode            OBJECT-TYPE
    SYNTAX      TmnxIngPolicerStatMode
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatMode indicates the stat mode used by the
         policer."
    ::= { sapIngQosPlcyPolicerStatsEntry 4 }

sapIgQosPlcyPStatOffHiPrioPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatOffHiPrioPkts indicates the number of
         high priority packets, as determined by the SAP ingress QoS policy,
         offered by the Pchip to the Qchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 5 }

sapIgQosPlcyPStatOffHiPrioPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatOffHiPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 6 }

sapIgQosPlcyPStatOffHiPrioPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatOffHiPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 7 }

sapIgQosPlcyPStatDrpHiPrioPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatDrpHiPrioPkts indicates the number of
         high priority packets, as determined by the SAP ingress QoS policy,
         dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded,
         etc."
    ::= { sapIngQosPlcyPolicerStatsEntry 8 }

sapIgQosPlcyPStatDrpHiPrioPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 9 }

sapIgQosPlcyPStatDrpHiPrioPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 10 }

sapIgQosPlcyPStatOffLoPrioPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatOffLoPrioPkts
         indicates the number of  low priority packets,
         as determined by the SAP ingress QoS policy, offered by
         the Pchip to the Qchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 11 }

sapIgQosPlcyPStatOffLoPrioPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatOffLoPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 12 }

sapIgQosPlcyPStatOffLoPrioPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatOffLoPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 13 }

sapIgQosPlcyPStatDrpLoPrioPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatDrpLoPrioPkts indicates the number of
         low priority packets, as determined by the SAP ingress QoS policy,
         dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded,
         etc."
    ::= { sapIngQosPlcyPolicerStatsEntry 14 }

sapIgQosPlcyPStatDrpLoPrioPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 15 }

sapIgQosPlcyPStatDrpLoPrioPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 16 }

sapIgQosPlcyPStatOffHiPrioOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatOffHiPrioOcts indicates the number of
         high priority octets, as determined by the SAP ingress QoS policy,
         offered by the Pchip to the Qchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 17 }

sapIgQosPlcyPStatOffHiPrioOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatOffHiPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 18 }

sapIgQosPlcyPStatOffHiPrioOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatOffHiPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 19 }

sapIgQosPlcyPStatDrpHiPrioOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatDrpHiPrioOcts indicates the number of
         high priority octets, as determined by the SAP ingress QoS policy,
         dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded,
         etc."
    ::= { sapIngQosPlcyPolicerStatsEntry 20 }

sapIgQosPlcyPStatDrpHiPrioOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 21 }

sapIgQosPlcyPStatDrpHiPrioOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 22 }

sapIgQosPlcyPStatOffLoPrioOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatOffLoPrioOcts indicates the number of
         low priority octets, as determined by the SAP ingress QoS policy,
         offered by the Pchip to the Qchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 23 }

sapIgQosPlcyPStatOffLoPrioOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatOffLoPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 24 }

sapIgQosPlcyPStatOffLoPrioOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatOffLoPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 25 }

sapIgQosPlcyPStatDrpLoPrioOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatDrpLoPrioOcts indicates the number of
         low priority octets, as determined by the SAP ingress QoS policy,
         dropped by the Pchip due to: MBS exceeded, buffer pool limit exceeded,
         etc."
    ::= { sapIngQosPlcyPolicerStatsEntry 26 }

sapIgQosPlcyPStatDrpLoPrioOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 27 }

sapIgQosPlcyPStatDrpLoPrioOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 28 }

sapIgQosPlcyPStatFwdInProfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatFwdInProfPkts indicates the number of
         in-profile packets (rate below CIR) forwarded by the ingress Pchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 29 }

sapIgQosPlcyPStatFwdInProfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatFwdInProfPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 30 }

sapIgQosPlcyPStatFwdInProfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatFwdInProfPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 31 }

sapIgQosPlcyPStatFwdOutProfPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatFwdOutProfPkts indicates the number of
         out-of-profile packets (rate above CIR) forwarded by the ingress
         Pchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 32 }

sapIgQosPlcyPStatFwdOutProfPktsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatFwdOutProfPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 33 }

sapIgQosPlcyPStatFwdOutProfPktsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatFwdOutProfPkts."
    ::= { sapIngQosPlcyPolicerStatsEntry 34 }

sapIgQosPlcyPStatFwdInProfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatFwdInProfOcts indicates the number of
         in-profile octets (rate below CIR) forwarded by the ingress Pchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 35 }

sapIgQosPlcyPStatFwdInProfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatFwdInProfOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 36 }

sapIgQosPlcyPStatFwdInProfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatFwdInProfOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 37 }

sapIgQosPlcyPStatFwdOutProfOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatFwdOutProfOcts
         indicates the number of  out-of-profile octets
         (rate above CIR) forwarded by the ingress Pchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 38 }

sapIgQosPlcyPStatFwdOutProfOctsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatFwdOutProfOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 39 }

sapIgQosPlcyPStatFwdOutProfOctsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatFwdOutProfOcts."
    ::= { sapIngQosPlcyPolicerStatsEntry 40 }

sapIgQosPlcyPStatUncolPktsOff    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatUncolPktsOff indicates the number of
         uncolored packets offered to the ingress Pchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 41 }

sapIgQosPlcyPStatUncolPktsOffL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatUncolPktsOff."
    ::= { sapIngQosPlcyPolicerStatsEntry 42 }

sapIgQosPlcyPStatUncolPktsOffH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatUncolPktsOff."
    ::= { sapIngQosPlcyPolicerStatsEntry 43 }

sapIgQosPlcyPStatUncolOctsOff    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapIgQosPlcyPStatUncolOctsOff indicates the number of
         uncolored octets offered to the ingress Pchip."
    ::= { sapIngQosPlcyPolicerStatsEntry 44 }

sapIgQosPlcyPStatUncolOctsOffL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapIgQosPlcyPStatUncolOctsOff."
    ::= { sapIngQosPlcyPolicerStatsEntry 45 }

sapIgQosPlcyPStatUncolOctsOffH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapIgQosPlcyPStatUncolOctsOff."
    ::= { sapIngQosPlcyPolicerStatsEntry 46 }

sapEgrQosPlcyPolicerStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosPlcyPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "A table that contains egress QoS policer SAP statistics per Egress QoS
         Policy the policer was used by.

         This table is obsoleted in 14.0 release."
    ::= { tmnxSapObjs 99 }

sapEgrQosPlcyPolicerStatsEntry   OBJECT-TYPE
    SYNTAX      SapEgrQosPlcyPolicerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Egress statistics about a specific SAP's QoS policer for a given Qos
         policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgQosPlcyPStatPlcyId,
        sapEgQosPlcyPStatPolId
    }
    ::= { sapEgrQosPlcyPolicerStatsTable 1 }

SapEgrQosPlcyPolicerStatsEntry   ::= SEQUENCE
{
    sapEgQosPlcyPStatPlcyId          TSapEgressPolicyID,
    sapEgQosPlcyPStatPolId           TEgrPolicerId,
    sapEgQosPlcyPStatCustId          TmnxCustId,
    sapEgQosPlcyPStatMode            TmnxEgrPolicerStatMode,
    sapEgQosPlcyPStatOffInProfPkts   Counter64,
    sapEgQosPlcyPStatOffInProfPktsL  Counter32,
    sapEgQosPlcyPStatOffInProfPktsH  Counter32,
    sapEgQosPlcyPStatFwdInProfPkts   Counter64,
    sapEgQosPlcyPStatFwdInProfPktsL  Counter32,
    sapEgQosPlcyPStatFwdInProfPktsH  Counter32,
    sapEgQosPlcyPStatDrpInProfPkts   Counter64,
    sapEgQosPlcyPStatDrpInProfPktsL  Counter32,
    sapEgQosPlcyPStatDrpInProfPktsH  Counter32,
    sapEgQosPlcyPStatOffOutProfPkts  Counter64,
    sapEgQosPlcyPStatOffOutProfPktsL Counter32,
    sapEgQosPlcyPStatOffOutProfPktsH Counter32,
    sapEgQosPlcyPStatFwdOutProfPkts  Counter64,
    sapEgQosPlcyPStatFwdOutProfPktsL Counter32,
    sapEgQosPlcyPStatFwdOutProfPktsH Counter32,
    sapEgQosPlcyPStatDrpOutProfPkts  Counter64,
    sapEgQosPlcyPStatDrpOutProfPktsL Counter32,
    sapEgQosPlcyPStatDrpOutProfPktsH Counter32,
    sapEgQosPlcyPStatOffInProfOcts   Counter64,
    sapEgQosPlcyPStatOffInProfOctsL  Counter32,
    sapEgQosPlcyPStatOffInProfOctsH  Counter32,
    sapEgQosPlcyPStatFwdInProfOcts   Counter64,
    sapEgQosPlcyPStatFwdInProfOctsL  Counter32,
    sapEgQosPlcyPStatFwdInProfOctsH  Counter32,
    sapEgQosPlcyPStatDrpInProfOcts   Counter64,
    sapEgQosPlcyPStatDrpInProfOctsL  Counter32,
    sapEgQosPlcyPStatDrpInProfOctsH  Counter32,
    sapEgQosPlcyPStatOffOutProfOcts  Counter64,
    sapEgQosPlcyPStatOffOutProfOctsL Counter32,
    sapEgQosPlcyPStatOffOutProfOctsH Counter32,
    sapEgQosPlcyPStatFwdOutProfOcts  Counter64,
    sapEgQosPlcyPStatFwdOutProfOctsL Counter32,
    sapEgQosPlcyPStatFwdOutProfOctsH Counter32,
    sapEgQosPlcyPStatDrpOutProfOcts  Counter64,
    sapEgQosPlcyPStatDrpOutProfOctsL Counter32,
    sapEgQosPlcyPStatDrpOutProfOctsH Counter32
}

sapEgQosPlcyPStatPlcyId          OBJECT-TYPE
    SYNTAX      TSapEgressPolicyID
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The row index in the tSapEgressTable corresponding to this egress QoS
         policy."
    ::= { sapEgrQosPlcyPolicerStatsEntry 1 }

sapEgQosPlcyPStatPolId           OBJECT-TYPE
    SYNTAX      TEgrPolicerId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The index of the egress QoS policer of this SAP used by the policy
         indicated by sapEgQosPlcyPStatPlcyId."
    ::= { sapEgrQosPlcyPolicerStatsEntry 2 }

sapEgQosPlcyPStatCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgQosPlcyPStatCustId indicates the Customer
         ID for the associated service."
    ::= { sapEgrQosPlcyPolicerStatsEntry 3 }

sapEgQosPlcyPStatMode            OBJECT-TYPE
    SYNTAX      TmnxEgrPolicerStatMode
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatMode indicates the stat mode used by the
         policer."
    ::= { sapEgrQosPlcyPolicerStatsEntry 4 }

sapEgQosPlcyPStatOffInProfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatOffInProfPkts indicates the number of
         in-profile packets (rate below CIR) offered by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 5 }

sapEgQosPlcyPStatOffInProfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatOffInProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 6 }

sapEgQosPlcyPStatOffInProfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatOffInProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 7 }

sapEgQosPlcyPStatFwdInProfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatFwdInProfPkts indicates the number of
         in-profile packets (rate below CIR) forwarded by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 8 }

sapEgQosPlcyPStatFwdInProfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatFwdInProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 9 }

sapEgQosPlcyPStatFwdInProfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatFwdInProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 10 }

sapEgQosPlcyPStatDrpInProfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatDrpInProfPkts indicates the number of
         in-profile packets discarded by the egress Qchip due to: MBS exceeded,
         buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyPolicerStatsEntry 11 }

sapEgQosPlcyPStatDrpInProfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatDrpInProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 12 }

sapEgQosPlcyPStatDrpInProfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatDrpInProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 13 }

sapEgQosPlcyPStatOffOutProfPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatOffOutProfPkts indicates the number of
         out-of-profile packets (rate above CIR) offered by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 14 }

sapEgQosPlcyPStatOffOutProfPktsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatOffOutProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 15 }

sapEgQosPlcyPStatOffOutProfPktsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatOffOutProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 16 }

sapEgQosPlcyPStatFwdOutProfPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatFwdOutProfPkts indicates the number of
         out-of-profile packets (rate above CIR) forwarded by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 17 }

sapEgQosPlcyPStatFwdOutProfPktsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatFwdOutProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 18 }

sapEgQosPlcyPStatFwdOutProfPktsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatFwdOutProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 19 }

sapEgQosPlcyPStatDrpOutProfPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatDrpOutProfPkts indicates the number
         out-of-profile packets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyPolicerStatsEntry 20 }

sapEgQosPlcyPStatDrpOutProfPktsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatDrpOutProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 21 }

sapEgQosPlcyPStatDrpOutProfPktsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatDrpOutProfPkts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 22 }

sapEgQosPlcyPStatOffInProfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatOffInProfOcts indicates the number of
         in-profile octets (rate below CIR) offered by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 23 }

sapEgQosPlcyPStatOffInProfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatOffInProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 24 }

sapEgQosPlcyPStatOffInProfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatOffInProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 25 }

sapEgQosPlcyPStatFwdInProfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatFwdInProfOcts indicates the number of
         in-profile octets (rate below CIR) forwarded by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 26 }

sapEgQosPlcyPStatFwdInProfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatFwdInProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 27 }

sapEgQosPlcyPStatFwdInProfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatFwdInProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 28 }

sapEgQosPlcyPStatDrpInProfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatDrpInProfOcts indicates the number
         in-profile octets discarded by the egress Qchip due to: MBS exceeded,
         buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyPolicerStatsEntry 29 }

sapEgQosPlcyPStatDrpInProfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatDrpInProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 30 }

sapEgQosPlcyPStatDrpInProfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatDrpInProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 31 }

sapEgQosPlcyPStatOffOutProfOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatOffOutProfOcts indicates the number of
         out-of-profile octets (rate above CIR) offered by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 32 }

sapEgQosPlcyPStatOffOutProfOctsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatOffOutProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 33 }

sapEgQosPlcyPStatOffOutProfOctsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatOffOutProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 34 }

sapEgQosPlcyPStatFwdOutProfOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatFwdOutProfOcts indicates the number of
         out-of-profile octets (rate above CIR) forwarded by the egress Qchip."
    ::= { sapEgrQosPlcyPolicerStatsEntry 35 }

sapEgQosPlcyPStatFwdOutProfOctsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatFwdOutProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 36 }

sapEgQosPlcyPStatFwdOutProfOctsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatFwdOutProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 37 }

sapEgQosPlcyPStatDrpOutProfOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sapEgQosPlcyPStatDrpOutProfOcts indicates the number
         out-of-profile octets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrQosPlcyPolicerStatsEntry 38 }

sapEgQosPlcyPStatDrpOutProfOctsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Lower 32 bits of sapEgQosPlcyPStatDrpOutProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 39 }

sapEgQosPlcyPStatDrpOutProfOctsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "Upper 32 bits of sapEgQosPlcyPStatDrpOutProfOcts."
    ::= { sapEgrQosPlcyPolicerStatsEntry 40 }

tmnxSapNotifyObjs                OBJECT IDENTIFIER ::= { tmnxSapObjs 100 }

sapNotifyPortId                  OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The ID of the access port where a SAP is defined."
    ::= { tmnxSapNotifyObjs 1 }

msapStatus                       OBJECT-TYPE
    SYNTAX      ConfigStatus
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The status of the Managed SAP which is used by the msapStateChanged
         notification to indicate what state the Managed SAP has entered:
         'created', 'modified', or 'deleted'."
    ::= { tmnxSapNotifyObjs 2 }

svcManagedSapCreationError       OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object svcManagedSapCreationError indicates the
         reason why the system was unable to create the managed SAP."
    ::= { tmnxSapNotifyObjs 3 }

sapTlsNotifyMacAddr              OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsNotifyMacAddr indicates the MAC address
         associated with a VPLS SAP."
    ::= { tmnxSapNotifyObjs 4 }

sapBGPPeeringHostIpAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapBGPPeeringHostIpAddrType indicates the address type of
         sapBGPPeeringHostIpAddr."
    ::= { tmnxSapNotifyObjs 5 }

sapBGPPeeringHostIpAddr          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapBGPPeeringHostIpAddr indicates the IP address of the
         host."
    ::= { tmnxSapNotifyObjs 6 }

sapBGPPeeringNotifDescription    OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object sapBGPPeeringNotifDescription is a printable character
         string."
    ::= { tmnxSapNotifyObjs 7 }

sapBGPPeeringAttrDiscarded       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapBGPPeeringAttrDiscarded is equal to 'true'
         if the BGP Peering attributes have been discarded."
    ::= { tmnxSapNotifyObjs 8 }

sapBGPPeeringVRtrID              OBJECT-TYPE
    SYNTAX      TmnxVRtrID
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The  unique value that identifies a virtual router."
    ::= { tmnxSapNotifyObjs 9 }

sapTunnelNotifyName              OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapTunnelNotifyName specifies the name of the IPsec or
         GRE tunnel."
    ::= { tmnxSapNotifyObjs 10 }

sapTunnelNotifyReason            OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapTunnelNotifyReason indicates the reason for the tunnel
         notification."
    ::= { tmnxSapNotifyObjs 11 }

sapTunnelNotifyState             OBJECT-TYPE
    SYNTAX      ServiceOperStatus
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapTunnelNotifyState indicates the operational state of
         the tunnel in the notification."
    ::= { tmnxSapNotifyObjs 12 }

sapNotifyReason                  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapNotifyReason indicates the reason for the SAP
         notification."
    ::= { tmnxSapNotifyObjs 13 }

sapNotifyName                    OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapNotifyName specifies a name."
    ::= { tmnxSapNotifyObjs 14 }

sapPppNcpFailureProtocol         OBJECT-TYPE
    SYNTAX      INTEGER {
        ipcp   (1),
        ipv6cp (2)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapPppNcpFailureProtocol indicates the failing NCP
         protocol."
    ::= { tmnxSapNotifyObjs 15 }

sapIpipeCeIpAddrType             OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeCeIpAddrType indicates the type of CE IP address
         on an IPIPE SAP. The CE IP address is specified by
         sapIpipeCeIpAddress."
    ::= { tmnxSapNotifyObjs 16 }

sapIpipeCeIpAddress              OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapIpipeCeIpAddress indicates the CE IP address of type
         sapIpipeCeIpAddrType on an IPIPE SAP."
    ::= { tmnxSapNotifyObjs 17 }

sapNotifyEncapValue              OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the label used to identify this SAP on the access port
         specified by sapNotifyPortId."
    ::= { tmnxSapNotifyObjs 18 }

sapTunnelNotifyConfigIpMtu       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapTunnelNotifyConfigIpMtu indicates the IP
         tunnel's configured IP MTU for packets entering the tunnel from the
         non-encapsulated side."
    ::= { tmnxSapNotifyObjs 19 }

sapTunnelNotifyEncapOverhead     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapTunnelNotifyEncapOverhead indicates the IP
         Tunnel's encapsulation overhead."
    ::= { tmnxSapNotifyObjs 20 }

sapTunnelNotifyConfigEncapIpMtu  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapTunnelNotifyConfigEncapIpMtu indicates the
         IP Tunnel's configured encapsulated IP MTU."
    ::= { tmnxSapNotifyObjs 21 }

sapRipListenerHostIpAddrType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapRipListenerHostIpAddrType indicates the address type
         of sapRipListenerHostIpAddr."
    ::= { tmnxSapNotifyObjs 22 }

sapRipListenerHostIpAddr         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapRipListenerHostIpAddr indicates the IP address of the
         host."
    ::= { tmnxSapNotifyObjs 23 }

sapRipListenerVRtrID             OBJECT-TYPE
    SYNTAX      TmnxVRtrID
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object sapRipListenerVRtrID uniquely identifies a virtual router."
    ::= { tmnxSapNotifyObjs 24 }

sapRipListenerNotifDescription   OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object sapRipListenerNotifDescription is a printable character
         string."
    ::= { tmnxSapNotifyObjs 25 }

sapNotifyIpAddrType              OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapNotifyIpAddrType indicates the address type
         of sapNotifyIpAddr."
    ::= { tmnxSapNotifyObjs 26 }

sapNotifyIpAddr                  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapNotifyIpAddr indicates an IP address."
    ::= { tmnxSapNotifyObjs 27 }

sapNotifyIfName                  OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapNotifyIfName specifies the interface name
         used to refer to L3 interface."
    ::= { tmnxSapNotifyObjs 28 }

sapNotifyPortState               OBJECT-TYPE
    SYNTAX      INTEGER {
        up    (1),
        down  (2),
        other (3)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object sapNotifyPortState specifies the status of the
         port for the particular sap as Up, Down, or Other."
    ::= { tmnxSapNotifyObjs 29 }

sapTmplTblLastChanged            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTmplTblLastChanged indicates the sysUpTime at the time
         of the last modification of sapTmplTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 101 }

sapTmplTable                     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTmplEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains basic SAP template information."
    ::= { tmnxSapObjs 102 }

sapTmplEntry                     OBJECT-TYPE
    SYNTAX      SapTmplEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Basic information about a specific SAP template."
    INDEX       { sapTmplName }
    ::= { sapTmplTable 1 }

SapTmplEntry                     ::= SEQUENCE
{
    sapTmplName                      TNamedItem,
    sapTmplRowStatus                 RowStatus,
    sapTmplLastChanged               TimeStamp,
    sapTmplSapCount                  Unsigned32,
    sapTmplType                      ServType,
    sapTmplIngressQosPolicyId        TTmplPolicyID,
    sapTmplIngressMacFilterId        TFilterID,
    sapTmplIngressIpFilterId         TFilterID,
    sapTmplEgressQosPolicyId         TTmplPolicyID,
    sapTmplEgressMacFilterId         TFilterID,
    sapTmplEgressIpFilterId          TFilterID,
    sapTmplCollectAcctStats          TruthValue,
    sapTmplIngressQosSchedulerPolicy ServObjName,
    sapTmplEgressQosSchedulerPolicy  ServObjName,
    sapTmplIngressSharedQueuePolicy  ServObjName,
    sapTmplIngressMatchQinQDot1PBits INTEGER,
    sapTmplIngressIpv6FilterId       TFilterID,
    sapTmplEgressIpv6FilterId        TFilterID,
    sapTmplIngUseMultipointShared    TruthValue,
    sapTmplEgressQinQMarkTopOnly     TruthValue,
    sapTmplEgressAggRateLimit        TPortSchedulerAggRateLimitPIR,
    sapTmplEgressFrameBasedAcctg     TruthValue,
    sapTmplIngressAggRateLimit       TPortSchedulerPIR,
    sapTmplIngPolicerPolicy          TNamedItemOrEmpty,
    sapTmplEgrPolicerPolicy          TNamedItemOrEmpty,
    sapTmplDot1agCfmMip              TruthValue,
    sapTmplCpmProtPolicyId           TCpmProtPolicyIDOrDefault,
    sapTmplCpmProtMonitorMac         TruthValue,
    sapTmplCpmProtEthCfmMonitorFlags BITS,
    sapTmplEgrAggRateLUB             TruthValue,
    sapTmplEthCfmSquelchIngress      BITS,
    sapTmplEgrAggRateLimitHi         TmnxQosRateHigh32,
    sapTmplEgrAggRateLimit           TmnxQosRateLow32,
    sapTmplDCpuProtPolicy            TNamedItemOrEmpty,
    sapTmplIngressQosPolicyName      TLNamedItemOrEmpty,
    sapTmplEgressQosPolicyName       TLNamedItemOrEmpty,
    sapTmplIngressIpFilterName       TLNamedItemOrEmpty,
    sapTmplIngressIpv6FilterName     TLNamedItemOrEmpty,
    sapTmplIngressMacFilterName      TLNamedItemOrEmpty,
    sapTmplEgressIpFilterName        TLNamedItemOrEmpty,
    sapTmplEgressIpv6FilterName      TLNamedItemOrEmpty,
    sapTmplEgressMacFilterName       TLNamedItemOrEmpty,
    sapTmplEthCfmSquelchIngressCtag  BITS
}

sapTmplName                      OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplName specifies the SAP template name.
         This name should be unique within the SAP template domain."
    ::= { sapTmplEntry 1 }

sapTmplRowStatus                 OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This value of the object  sapTmplRowStatus specifies the
         status of this row."
    ::= { sapTmplEntry 2 }

sapTmplLastChanged               OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTmplLastChanged indicates the timestamp of last change
         to this row in sapTmplTable."
    ::= { sapTmplEntry 3 }

sapTmplSapCount                  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTmplSapCount indicates the number of instantiated SAPs
         created using this template."
    ::= { sapTmplEntry 4 }

sapTmplType                      OBJECT-TYPE
    SYNTAX      ServType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the type of service where this SAP is defined.

         An 'inconsistentValue' error is returned if an attempt is made to
         change the value of this object after row creation."
    ::= { sapTmplEntry 5 }

sapTmplIngressQosPolicyId        OBJECT-TYPE
    SYNTAX      TTmplPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplIngressQosPolicyId specifies the row
         index in the tSapIngressTable corresponding to this ingress QoS
         policy. The value 0 is needed for mirror SAPs that cannot have a QoS
         policy assigned.

         The value of this object is ignored, when the value of
         sapTmplIngressQosPolicyName it set to non-default value."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 6 }

sapTmplIngressMacFilterId        OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplIngressMacFilterId specifies the row
         index in the tMacFilterTable corresponding to this ingress filter, or
         zero if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 7 }

sapTmplIngressIpFilterId         OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplIngressIpFilterId specifies the row
         index in the tIPFilterTable corresponding to this ingress filter, or
         zero if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 8 }

sapTmplEgressQosPolicyId         OBJECT-TYPE
    SYNTAX      TTmplPolicyID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplEgressQosPolicyId specifies the row
         index in the tSapEgressTable corresponding to this egress QoS policy.

         The value of this object is ignored, when the value of
         sapTmplEgressQosPolicyName it set to non-default value."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 9 }

sapTmplEgressMacFilterId         OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The row index in the tMacFilterTable corresponding to this egress
         filter, or zero if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 10 }

sapTmplEgressIpFilterId          OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The row index in the tIPFilterTable corresponding to this egress
         filter, or zero if no filter is specified."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 11 }

sapTmplCollectAcctStats          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of this object is 'true' the agent collects accounting
         statistics on this SAP."
    DEFVAL      { false }
    ::= { sapTmplEntry 12 }

sapTmplIngressQosSchedulerPolicy OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplIngressQosSchedulerPolicy specifies the ingress
         QoS scheduler for this SAP."
    DEFVAL      { "" }
    ::= { sapTmplEntry 13 }

sapTmplEgressQosSchedulerPolicy  OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgressQosSchedulerPolicy specifies the egress QoS
         scheduler for this SAP."
    DEFVAL      { "" }
    ::= { sapTmplEntry 14 }

sapTmplIngressSharedQueuePolicy  OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the ingress shared queue policy used by this
         SAP. When the value of this object is null it means that the SAP will
         use individual ingress QoS queues, instead of the shared ones."
    DEFVAL      { "" }
    ::= { sapTmplEntry 15 }

sapTmplIngressMatchQinQDot1PBits OBJECT-TYPE
    SYNTAX      INTEGER {
        default (1),
        top     (2),
        bottom  (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object applies only to SAPs defined on a port configured for qinq
         service encapsulation. It specifies which 802.1P bits will be used to
         match a QoS or a MAC filter policy when a double-tagged frame is
         received on this SAP."
    DEFVAL      { default }
    ::= { sapTmplEntry 16 }

sapTmplIngressIpv6FilterId       OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplIngressIpv6FilterId specifies the row
         index in the tIPv6FilterTable corresponding to this ingress ipv6
         filter, or zero if no ipv6 filter is specified."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 17 }

sapTmplEgressIpv6FilterId        OBJECT-TYPE
    SYNTAX      TFilterID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplEgressIpv6FilterId specifies the row
         index in the tIPv6FilterTable corresponding to this egress ipv6
         filter, or zero if no ipv6 filter is specified."
    DEFVAL      { 0 }
    ::= { sapTmplEntry 18 }

sapTmplIngUseMultipointShared    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the value of sapIngressSharedQueuePolicy is not null, the value
         of the object sapTmplIngUseMultipointShared specifies whether this SAP
         uses the multipoint-shared queues of the shared policy."
    DEFVAL      { false }
    ::= { sapTmplEntry 19 }

sapTmplEgressQinQMarkTopOnly     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "When the encapsulation type of the access port where this SAP is
         defined is qinq, the value of the object sapTmplEgressQinQMarkTopOnly
         specifies which P-bits to mark during packet egress. When the value is
         false both set of P-bits are marked. When the value is true, only the
         P-bits in the top Q-tag are marked."
    DEFVAL      { false }
    ::= { sapTmplEntry 20 }

sapTmplEgressAggRateLimit        OBJECT-TYPE
    SYNTAX      TPortSchedulerAggRateLimitPIR
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTmplEgressAggRateLimit specifies the
         maximum total rate of all egress queues for this SAP. The value '-1'
         means that there is no limit.

         This object is obsoleted in 13.0 release and replaced by
         sapTmplEgrAggRateLimit."
    DEFVAL      { -1 }
    ::= { sapTmplEntry 21 }

sapTmplEgressFrameBasedAcctg     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgressFrameBasedAcctg specifies whether to use
         frame-based accounting when evaluating sapTmplEgrAggRateLimit for all
         egress queues for this SAP.

         If the value is 'false', the default packet-based accounting method
         will be used."
    DEFVAL      { false }
    ::= { sapTmplEntry 22 }

sapTmplIngressAggRateLimit       OBJECT-TYPE
    SYNTAX      TPortSchedulerPIR
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapTmplIngressAggRateLimit specifies the
         maximum total rate of all ingress queues for this SAP. The value '-1'
         means that there is no limit.

         This object is obsoleted in 10.0 Release."
    DEFVAL      { -1 }
    ::= { sapTmplEntry 23 }

sapTmplIngPolicerPolicy          OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplIngPolicerPolicy specifies the ingress policer
         control policy applicable."
    DEFVAL      { ''H }
    ::= { sapTmplEntry 24 }

sapTmplEgrPolicerPolicy          OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgrPolicerPolicy specifies the egress policer
         control policy applicable."
    DEFVAL      { ''H }
    ::= { sapTmplEntry 25 }

sapTmplDot1agCfmMip              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplDot1agCfmMip specifies whether Maintenance
         Intermediate Points (MIP) will be created."
    DEFVAL      { false }
    ::= { sapTmplEntry 26 }

sapTmplCpmProtPolicyId           OBJECT-TYPE
    SYNTAX      TCpmProtPolicyIDOrDefault
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplCpmProtPolicyId associates a CPM Protection policy
         with a SAP.

         A value of '-1' specifies that the system will determine the CPM
         Protection policy for this SAP."
    DEFVAL      { -1 }
    ::= { sapTmplEntry 27 }

sapTmplCpmProtMonitorMac         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplCpmProtMonitorMac specifies whether the
         tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be
         applied.

         If the value of sapTmplCpmProtMonitorMac is 'true', the per-source
         rate limit must be applied.

         The sapTmplCpmProtMonitorMac will be ignored if the system derived CPM
         Protection Policy from sapTmplCpmProtPolicyId is set to 'zero' for the
         instantiated SAP.

         At most one of sapTmplCpmProtMonitorMac and the
         sapTmplCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be
         enabled for this template."
    DEFVAL      { false }
    ::= { sapTmplEntry 28 }

sapTmplCpmProtEthCfmMonitorFlags OBJECT-TYPE
    SYNTAX      BITS {
        ethCfmMonitor                    (0),
        ethCfmMonitorAggregate           (1),
        ethCfmMonitorCommittedAccessRate (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplCpmProtEthCfmMonitorFlags specifies whether or not
         to apply rate limiting (using the tmnxCpmProtEthCfmPolTable
         configuration) to Ethernet Connectivity Fault Management (Eth-CFM)
         packets served by a SAP created using this template.  Two associated
         options are also specified.

         Five combinations of flag values are supported, as shown in the
         following table.

         Flag                                    Value (0=Disabled, 1=Enabled)
         -------------------------------------   -----------------------------
         'ethCfmMonitor(0)'                      0   0   0   0   1   1   1   1
         'ethCfmMonitorAggregate(1)'             0   0   1   1   0   0   1   1
         'ethCfmMonitorCommittedAccessRate(2)'   0   1   0   1   0   1   0   1
         -------------------------------------   -----------------------------
         Supported Combination?                  Y   N   N   N   Y   Y   Y   Y

         If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled
         on the SAP.

         If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
         the SAP.  Excess packets are discarded.  The configured information
         used to perform the Eth-CFM rate limiting (e.g. the rate limit(s))
         resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the
         template's sapTmplCpmProtPolicyId.

         At most one of 'ethCfmMonitor(0)' and sapTmplCpmProtMonitorMac can be
         enabled for this template.

         The flags 'ethCfmMonitorAggregate(1)' and
         'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
         rate limiting.  Therefore, they are only significant if Eth-CFM rate
         limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled).  The
         remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.

         If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
         (i.e. on a source MAC address basis).  For example, if the SAP's rate
         limit for all Eth-CFM packets is 100 packets/sec, and two peers are
         served by the SAP, then 100 Eth-CFM packets/sec from each peer is
         within the limit.

         If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
         aggregated traffic flow.  For example, if the SAP's rate limit for all
         Eth-CFM packets is 100 packets/sec, and two peers are served by this
         SAP, then the combined rate of the two peers cannot exceed 100
         packets/sec.

         'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
         between two features:  Eth-CFM rate limiting, and overall rate limiting
         (as configured using tmnxCpmProtPolOverallRateLimit).

         If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
         packet is subjected to two rate limits, in the following order.
         a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
            described above.  If the packet exceeds the limit, it is discarded.
            Otherwise...
         b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied
            to Eth-CFM packets, and the other rate limited packet types) is
            applied.

         If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
         is subjected to one rate limit:  the applicable
         tmnxCpmProtEthCfmPolRateLimit, as described above.  Eth-CFM packets
         are neither counted nor discarded when performing the
         tmnxCpmProtPolOverallRateLimit rate limiting."
    DEFVAL      { {} }
    ::= { sapTmplEntry 29 }

sapTmplEgrAggRateLUB             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgrAggRateLUB specifies whether to limit the
         unused bandwidth and allow a tighter control in allocation of
         bandwidth by HQos.

         When the value of sapTmplEgrAggRateLUB is set to 'true', HQos
         algorithm distributes any unused aggregate bandwidth between queues
         operating below their fair share rates. This allows a simplified
         aggregate rate protection while allocating bandwidth by HQos
         scheduling algorithm."
    DEFVAL      { false }
    ::= { sapTmplEntry 30 }

sapTmplEthCfmSquelchIngress      OBJECT-TYPE
    SYNTAX      BITS {
        level0 (0),
        level1 (1),
        level2 (2),
        level3 (3),
        level4 (4),
        level5 (5),
        level6 (6),
        level7 (7)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEthCfmSquelchIngress specifies the ETH-CFM level
         or levels that are silently discarded on ingress to the SAP. Any
         received ETH-CFM PDU matching a level that has been set will be
         dropped without regard for any other ETH-CFM criteria.

         No statistical information or drop count will be available for any
         ETH-CFM PDU that is silently discarded by this option."
    DEFVAL      { {} }
    ::= { sapTmplEntry 31 }

sapTmplEgrAggRateLimitHi         OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgrAggRateLimitHi specifies the upper 32 bits of
         the maximum total rate of all egress queues for this SAP.

         This value should always be set along with sapTmplEgrAggRateLimit,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapTmplEgrAggRateLimitHi along with the value of
         sapTmplEgrAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for
         this SAP indicates maximum total rate of all egress queues."
    DEFVAL      { 4294967295 }
    ::= { sapTmplEntry 33 }

sapTmplEgrAggRateLimit           OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgrAggRateLimit specifies the maximum total rate
         of all egress queues for this SAP. The value of 4294967295
         (0xFFFFFFFF) means that there is no limit.

         When the value of sapTmplEgrAggRateLimitHi along with the value of
         sapTmplEgrAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for
         this SAP indicates maximum total rate of all egress queues."
    DEFVAL      { 4294967295 }
    ::= { sapTmplEntry 34 }

sapTmplDCpuProtPolicy            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplDCpuProtPolicy associates Distributed CPU
         Protection Policy with a SAP template."
    DEFVAL      { ''H }
    ::= { sapTmplEntry 35 }

sapTmplIngressQosPolicyName      OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplIngressQosPolicyName specifies the ingress QoS
         policy name.

         When the value of this object, it set to non-default, the value of
         object sapTmplIngressQosPolicyId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 36 }

sapTmplEgressQosPolicyName       OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgressQosPolicyName specifies the egress QoS
         policy name.

         When the value of this object, it set to non-default, the value of
         object sapTmplEgressQosPolicyId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 37 }

sapTmplIngressIpFilterName       OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplIngressIpFilterName specifies the ingress Filter
         name.

         When the value of this object is set to non-default, the value of
         object sapTmplIngressIpFilterId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 38 }

sapTmplIngressIpv6FilterName     OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplIngressIpv6FilterName specifies the ingress Filter
         name.

         When the value of this object is set to non-default, the value of
         object sapTmplIngressIpv6FilterId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 39 }

sapTmplIngressMacFilterName      OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplIngressMacFilterName specifies the ingress Filter
         name.

         When the value of this object is set to non-default, the value of
         object sapTmplIngressMacFilterId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 40 }

sapTmplEgressIpFilterName        OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgressIpFilterName specifies the ingress Filter
         name.

         When the value of this object is set to non-default, the value of
         object sapTmplEgressIpFilterId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 41 }

sapTmplEgressIpv6FilterName      OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgressIpv6FilterName specifies the ingress Filter
         name.

         When the value of this object is set to non-default, the value of
         object sapTmplEgressIpv6FilterId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 42 }

sapTmplEgressMacFilterName       OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEgressMacFilterName specifies the ingress Filter
         name.

         When the value of this object is set to non-default, the value of
         object sapTmplEgressMacFilterId is ignored."
    DEFVAL      { "" }
    ::= { sapTmplEntry 43 }

sapTmplEthCfmSquelchIngressCtag  OBJECT-TYPE
    SYNTAX      BITS {
        level0 (0),
        level1 (1),
        level2 (2),
        level3 (3),
        level4 (4),
        level5 (5),
        level6 (6),
        level7 (7)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTmplEthCfmSquelchIngressCtag specifies the ETH-CFM
         level or levels of the ETH-CFM PDUs that are silently discarded using
         additional VLAN space immediately following ingress service
         delineation.

         Any received ETH-CFM PDU matching a level that has been set will be
         dropped without regard for the vlan-id in that additional space.

         No statistical information or drop count will be available for any
         ETH-CFM PDU that is silently discarded by this option."
    DEFVAL      { {} }
    ::= { sapTmplEntry 44 }

sapTmplTlsTblLastChanged         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTmplTlsTblLastChanged indicates the sysUpTime at the
         time of the last modification of sapTmplTlsTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 103 }

sapTmplTlsTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTmplTlsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains VPLS SAP template information."
    ::= { tmnxSapObjs 104 }

sapTmplTlsEntry                  OBJECT-TYPE
    SYNTAX      SapTmplTlsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains basic information about a specific VPLS SAP
         template. An entry in this table is created when an entry is created
         in the sapTmplTable with sapTmplType set to 'tls'. Entry is deleted
         when corresponding entry is deleted in sapTmplTable."
    INDEX       { sapTmplName }
    ::= { sapTmplTlsTable 1 }

SapTmplTlsEntry                  ::= SEQUENCE
{
    sapTmplTlsLastChanged            TimeStamp,
    sapTmplTlsMacAgeing              TmnxEnabledDisabled,
    sapTmplTlsStpAdminStatus         TmnxEnabledDisabled,
    sapTmplTlsStpPriority            Integer32,
    sapTmplTlsStpPathCost            Integer32,
    sapTmplTlsStpRapidStart          TmnxEnabledDisabled,
    sapTmplTlsStpBpduEncap           INTEGER,
    sapTmplTlsMacAddressLimit        Integer32,
    sapTmplTlsMacLearning            TmnxEnabledDisabled,
    sapTmplTlsStpAdminPointToPoint   INTEGER,
    sapTmplTlsStpAutoEdge            TmnxEnabledDisabled,
    sapTmplTlsDiscardUnknownSource   TmnxEnabledDisabled,
    sapTmplTlsL2ptTermination        TmnxEnabledDisabled,
    sapTmplTlsBpduTranslation        TlsBpduTranslation,
    sapTmplTlsStpRootGuard           TruthValue,
    sapTmplTlsL2ptProtocols          L2ptProtocols,
    sapTmplTlsLimitMacMove           TlsLimitMacMove,
    sapTmplTlsLimitMacMoveLevel      TlsLimitMacMoveLevel
}

sapTmplTlsLastChanged            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTmplTlsLastChanged indicates the timestamp of last
         change to this row in sapTmplTlsTable."
    ::= { sapTmplTlsEntry 1 }

sapTmplTlsMacAgeing              OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsMacAgeing specifies whether the MAC
         aging process is enabled for this SAP template. The value will be
         ignored if MAC aging is disabled on service level."
    DEFVAL      { enabled }
    ::= { sapTmplTlsEntry 2 }

sapTmplTlsStpAdminStatus         OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsStpAdminStatus specifies whether
         this SAP participates in the TLS's Spanning Tree Protocol."
    DEFVAL      { enabled }
    ::= { sapTmplTlsEntry 3 }

sapTmplTlsStpPriority            OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsStpPriority specifies the value of
         the port priority field which is contained in the most significant 4
         bits of the 16-bit Port ID associated with this SAP. As only the most
         significant 4 bits of the value are used, the actual value of this
         object is limited to multiples of 16: e.g. the agent rounds down the
         value to one of: 0, 16, 32, .. , 224, 240."
    DEFVAL      { 128 }
    ::= { sapTmplTlsEntry 4 }

sapTmplTlsStpPathCost            OBJECT-TYPE
    SYNTAX      Integer32 (1..200000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object  sapTmplTlsStpPathCost specifies the
         contribution of this port to the path cost of paths
         towards the spanning tree root which include this port."
    DEFVAL      { 10 }
    ::= { sapTmplTlsEntry 5 }

sapTmplTlsStpRapidStart          OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsStpRapidStart specifies whether
         Rapid Start is enabled on this SAP. When the value is 'enabled' the
         Spanning Tree Protocol state transitions on this SAP are driven by the
         value of the 'HelloTime' instead of the value of 'ForwardDelay', thus
         allowing a faster transition into the forwarding state. This parameter
         is also referred to as 'adminEdge'. "
    DEFVAL      { disabled }
    ::= { sapTmplTlsEntry 6 }

sapTmplTlsStpBpduEncap           OBJECT-TYPE
    SYNTAX      INTEGER {
        dynamic (1),
        dot1d   (2),
        pvst    (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsStpBpduEncap specifies the type of
         encapsulation used on BPDUs sent out and received on this SAP."
    DEFVAL      { dynamic }
    ::= { sapTmplTlsEntry 7 }

sapTmplTlsMacAddressLimit        OBJECT-TYPE
    SYNTAX      Integer32 (0..511999)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsMacAddressLimit specifies the
         maximum number of learned and static entries allowed in the FDB of
         this SAP. The value 0 means: no limit for this SAP."
    DEFVAL      { 0 }
    ::= { sapTmplTlsEntry 8 }

sapTmplTlsMacLearning            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsMacLearning specifies
         whether the MAC learning process  is enabled for this SAP.
         The value is ignored if MAC learning is disabled on
         service level."
    DEFVAL      { enabled }
    ::= { sapTmplTlsEntry 9 }

sapTmplTlsStpAdminPointToPoint   OBJECT-TYPE
    SYNTAX      INTEGER {
        forceTrue  (0),
        forceFalse (1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsStpAdminPointToPoint
         specifies the administrative point-to-point  status  of
         the LAN segment attached to this  sap. The value
         'forceTrue' means that this port should  always  be
         treated as if it is connected to a point-to-point link.
         The value of 'forceFalse' means that this port should
         be treated as having a shared media connection."
    REFERENCE
        "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
    DEFVAL      { forceTrue }
    ::= { sapTmplTlsEntry 10 }

sapTmplTlsStpAutoEdge            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "sapTmplTlsStpAutoEdge specifies whether this SAP is enabled for
         auto-edge detection as defined by Rapid Spanning Tree Protocol."
    DEFVAL      { enabled }
    ::= { sapTmplTlsEntry 11 }

sapTmplTlsDiscardUnknownSource   OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "with   the object sapTmplTlsMacAddressLimit a limit can be
         configured  for  the  max number of MAC addresses that
         will  be learned on this  SAP.  When  this limit is
         reached, packets with unknown source MAC address are
         forwarded by default. By setting
         sapTmplTlsDiscardUnknownSource  to enabled, packets with
         unknown source MAC will be dropped in stead."
    DEFVAL      { disabled }
    ::= { sapTmplTlsEntry 12 }

sapTmplTlsL2ptTermination        OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsL2ptTermination specifies whether
         received Layer 2 Protocol Tunnel (L2PT) PDUs are terminated on this
         port or sap."
    DEFVAL      { disabled }
    ::= { sapTmplTlsEntry 13 }

sapTmplTlsBpduTranslation        OBJECT-TYPE
    SYNTAX      TlsBpduTranslation
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsBpduTranslation specifies whether
         received L2 Protocol Tunnel PDUs are translated before being sent out
         on this port or sap."
    DEFVAL      { disabled }
    ::= { sapTmplTlsEntry 14 }

sapTmplTlsStpRootGuard           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsStpRootGuard specifies whether this
         port is allowed to become STP root port. It corresponds to the
         parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of
         spanning tree connectivity."
    DEFVAL      { false }
    ::= { sapTmplTlsEntry 15 }

sapTmplTlsL2ptProtocols          OBJECT-TYPE
    SYNTAX      L2ptProtocols
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsL2ptProtocols specifies which L2
         Protocol Tunnel PDUs are terminated on this port or sap."
    DEFVAL      { {stp} }
    ::= { sapTmplTlsEntry 16 }

sapTmplTlsLimitMacMove           OBJECT-TYPE
    SYNTAX      TlsLimitMacMove
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When sapTmplTlsLimitMacMove value is set  to  'blockable'
         the  agent will monitor the MAC relearn rate on this
         SAP,  and it will  block  it  when the relearn rate
         specified  by  svcTlsMacMoveMaxRate  is exceeded. When
         the  value is  'nonBlockable'  this  SAP will not be
         blocked,  and  another  blockable  SAP will be blocked
         instead."
    DEFVAL      { blockable }
    ::= { sapTmplTlsEntry 17 }

sapTmplTlsLimitMacMoveLevel      OBJECT-TYPE
    SYNTAX      TlsLimitMacMoveLevel
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTmplTlsLimitMacMoveLevel specifies the
         hierarchy in which SAPs are blocked when a MAC-move limit is exceeded.
         When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind
         or spoke-SDP bind with the lower level is blocked first. (tertiary is
         the lowest)"
    DEFVAL      { tertiary }
    ::= { sapTmplTlsEntry 18 }

sapTlsEsVidGrpTblLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsEsVidGrpTblLastChanged indicates the sysUpTime at
         the time of the last modification of sapTlsEsVidGrpTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 105 }

sapTlsEsVidGrpTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsEsVidGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains TLS SAP specific Multiple VLAN Registration
         Protocol (MVRP) end-station VLAN range group information."
    ::= { tmnxSapObjs 106 }

sapTlsEsVidGrpEntry              OBJECT-TYPE
    SYNTAX      SapTlsEsVidGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains TLS SAP specific MVRP end-station VLAN range
         group information."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsEsVidGrpId
    }
    ::= { sapTlsEsVidGrpTable 1 }

SapTlsEsVidGrpEntry              ::= SEQUENCE
{
    sapTlsEsVidGrpId                 TmnxVlanGroupId,
    sapTlsEsVidGrpRowStatus          RowStatus,
    sapTlsEsVidGrpLastChgd           TimeStamp,
    sapTlsEsVidGrpStartVlanTag       QTag,
    sapTlsEsVidGrpEndVlanTag         QTag
}

sapTlsEsVidGrpId                 OBJECT-TYPE
    SYNTAX      TmnxVlanGroupId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsEsVidGrpId specifies the MVRP
         end-station VLAN range group identifier. This identifier should be
         unique within this SAP domain."
    ::= { sapTlsEsVidGrpEntry 1 }

sapTlsEsVidGrpRowStatus          OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This value of the object sapTlsEsVidGrpRowStatus specifies the status
         of this row."
    ::= { sapTlsEsVidGrpEntry 2 }

sapTlsEsVidGrpLastChgd           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsEsVidGrpLastChgd indicates the timestamp of last
         change to this row in sapTlsEsVidGrpTable."
    ::= { sapTlsEsVidGrpEntry 3 }

sapTlsEsVidGrpStartVlanTag       OBJECT-TYPE
    SYNTAX      QTag
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsEsVidGrpStartVlanTag specifies the start
         of the VLAN tag range.

         An 'inconsistentValue' error is returned if value of this object is
         not specified at the time of row creation."
    ::= { sapTlsEsVidGrpEntry 4 }

sapTlsEsVidGrpEndVlanTag         OBJECT-TYPE
    SYNTAX      QTag
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsEsVidGrpEndVlanTag specifies the end of
         the VLAN tag range.

         An 'inconsistentValue' error is returned if value of this object is
         not specified at the time of row creation."
    ::= { sapTlsEsVidGrpEntry 5 }

sapTmplUserTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTmplUserEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAPs which are created using SAP templates."
    ::= { tmnxSapObjs 107 }

sapTmplUserEntry                 OBJECT-TYPE
    SYNTAX      SapTmplUserEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table provides information about SAP created using a SAP
         template.

         Entries are created and deleted by the system."
    INDEX       {
        sapTmplName,
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTmplUserTable 1 }

SapTmplUserEntry                 ::= SEQUENCE
{
    sapTmplUserCreationOrigin        INTEGER,
    sapTmplUserCreatorSvcId          TmnxServId
}

sapTmplUserCreationOrigin        OBJECT-TYPE
    SYNTAX      INTEGER {
        mVpls (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapTmplUserCreationOrigin indicates how this SAP was created
         using this specific SAP template."
    ::= { sapTmplUserEntry 1 }

sapTmplUserCreatorSvcId          OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapTmplUserCreatorSvcId indicates the service identifier
         which created this particular SAP using this template.

         A value of zero indicates that the SAP is not created by a service."
    ::= { sapTmplUserEntry 2 }

sapIngQosArbitStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapIngQosArbitStatsTable contains ingress QoS arbiter statistics
         about SAPs.

         In the descriptions below 'Pchip' refers to the Nokia SROS series
         Packet Processing chip, while 'Qchip' refers to the Nokia SROS series
         QoS Queueing Engine chip."
    ::= { tmnxSapObjs 108 }

sapIngQosArbitStatsEntry         OBJECT-TYPE
    SYNTAX      SapIngQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry contains ingress statistics about a particular SAP QoS
         arbiter."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosArbitStatsName
    }
    ::= { sapIngQosArbitStatsTable 1 }

SapIngQosArbitStatsEntry         ::= SEQUENCE
{
    sapIngQosArbitStatsName          TNamedItem,
    sapIngQosArbitStatsFwdPkts       Counter64,
    sapIngQosArbitStatsFwdPktsLo     Counter32,
    sapIngQosArbitStatsFwdPktsHi     Counter32,
    sapIngQosArbitStatsFwdOcts       Counter64,
    sapIngQosArbitStatsFwdOctsLo     Counter32,
    sapIngQosArbitStatsFwdOctsHi     Counter32
}

sapIngQosArbitStatsName          OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsName specifies the ingress QoS arbiter
         of this SAP."
    ::= { sapIngQosArbitStatsEntry 1 }

sapIngQosArbitStatsFwdPkts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsFwdPkts indicates the number of
         forwarded packets, as determined by the SAP ingress policer control
         policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosArbitStatsEntry 2 }

sapIngQosArbitStatsFwdPktsLo     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsFwdPktsLo indicates the lower 32 bits
         of sapIngQosArbitStatsFwdPkts."
    ::= { sapIngQosArbitStatsEntry 3 }

sapIngQosArbitStatsFwdPktsHi     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsFwdPktsHi indicates the upper 32 bits
         of sapIngQosArbitStatsFwdPkts."
    ::= { sapIngQosArbitStatsEntry 4 }

sapIngQosArbitStatsFwdOcts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsFwdOcts indicates the number of
         forwarded octets, as determined by the SAP ingress policer control
         policy, offered by the Pchip to the Qchip."
    ::= { sapIngQosArbitStatsEntry 5 }

sapIngQosArbitStatsFwdOctsLo     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsFwdOctsLo indicates the lower 32 bits
         of sapIngQosArbitStatsFwdOcts."
    ::= { sapIngQosArbitStatsEntry 6 }

sapIngQosArbitStatsFwdOctsHi     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosArbitStatsFwdOctsHi indicates the upper 32 bits
         of sapIngQosArbitStatsFwdOcts."
    ::= { sapIngQosArbitStatsEntry 7 }

sapEgrQosArbitStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrQosArbitStatsTable contains egress QoS arbiter statistics
         about SAPs. In the descriptions below 'Pchip' refers to the Nokia SROS
         series Packet Processing chip, while 'Qchip' refers to the Nokia SROS
         series QoS Queueing Engine chip."
    ::= { tmnxSapObjs 109 }

sapEgrQosArbitStatsEntry         OBJECT-TYPE
    SYNTAX      SapEgrQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry contains egress statistics about a particular SAP QoS
         arbiter."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosArbitStatsName
    }
    ::= { sapEgrQosArbitStatsTable 1 }

SapEgrQosArbitStatsEntry         ::= SEQUENCE
{
    sapEgrQosArbitStatsName          TNamedItem,
    sapEgrQosArbitStatsFwdPkts       Counter64,
    sapEgrQosArbitStatsFwdPktsLo     Counter32,
    sapEgrQosArbitStatsFwdPktsHi     Counter32,
    sapEgrQosArbitStatsFwdOcts       Counter64,
    sapEgrQosArbitStatsFwdOctsLo     Counter32,
    sapEgrQosArbitStatsFwdOctsHi     Counter32
}

sapEgrQosArbitStatsName          OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsName specifies the egress QoS arbiter
         of this SAP."
    ::= { sapEgrQosArbitStatsEntry 1 }

sapEgrQosArbitStatsFwdPkts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsFwdPkts indicates the number of
         forwarded packets, as determined by the SAP egress policer control
         policy, offered by the Pchip to the Qchip."
    ::= { sapEgrQosArbitStatsEntry 2 }

sapEgrQosArbitStatsFwdPktsLo     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsFwdPktsLo indicates the lower 32 bits
         of sapEgrQosArbitStatsFwdPkts."
    ::= { sapEgrQosArbitStatsEntry 3 }

sapEgrQosArbitStatsFwdPktsHi     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsFwdPktsHi indicates the upper 32 bits
         of sapEgrQosArbitStatsFwdPkts."
    ::= { sapEgrQosArbitStatsEntry 4 }

sapEgrQosArbitStatsFwdOcts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsFwdOcts indicates the number of
         forwarded octets, as determined by the SAP egress policer control
         policy, offered by the Pchip to the Qchip."
    ::= { sapEgrQosArbitStatsEntry 5 }

sapEgrQosArbitStatsFwdOctsLo     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsFwdOctsLo indicates the lower 32 bits
         of sapEgrQosArbitStatsFwdOcts."
    ::= { sapEgrQosArbitStatsEntry 6 }

sapEgrQosArbitStatsFwdOctsHi     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosArbitStatsFwdOctsHi indicates the upper 32 bits
         of sapEgrQosArbitStatsFwdOcts."
    ::= { sapEgrQosArbitStatsEntry 7 }

sapTlsMvrpTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsMvrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains an entry for each VLAN managed
         by Multiple VLAN Registration Protocol (MVRP) on the SAP
         for the TLS.  Entries are dynamically created and
         destroyed by the system as the VLANs are registered
         or declared in MVRP."
    ::= { tmnxSapObjs 110 }

sapTlsMvrpEntry                  OBJECT-TYPE
    SYNTAX      SapTlsMvrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "MVRP specific information about a VLANs managed by MVRP on a SAP in a
         TLS."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsMvrpVlanId
    }
    ::= { sapTlsMvrpTable 1 }

SapTlsMvrpEntry                  ::= SEQUENCE
{
    sapTlsMvrpVlanId                 Unsigned32,
    sapTlsMvrpDeclared               TruthValue,
    sapTlsMvrpRegistered             TruthValue,
    sapTlsMvrpEndStation             TruthValue
}

sapTlsMvrpVlanId                 OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4095)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvrpVlanId indicates a VLAN which is being managed
         by MVRP on this SAP."
    ::= { sapTlsMvrpEntry 1 }

sapTlsMvrpDeclared               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvrpDeclared indicates whether the MVRP applicant
         on this SAP is declaring this VLAN on behalf of MVRP."
    ::= { sapTlsMvrpEntry 2 }

sapTlsMvrpRegistered             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvrpRegistered indicates whether the MVRP
         registrant on this SAP has notified MVRP of a registration of this
         VLAN."
    ::= { sapTlsMvrpEntry 3 }

sapTlsMvrpEndStation             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsMvrpEndStation indicates whether the MVRP
         registrant on this SAP is registered per end station."
    ::= { sapTlsMvrpEntry 4 }

sapPortIdIngQosArbitStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPortIdIngQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdIngQosArbitStatsTable contains ingress QoS
         queue SAP statistics. This table is used when the SAP
         is  a CCAG or LAG in 'link' mode, or an APS."
    ::= { tmnxSapObjs 111 }

sapPortIdIngQosArbitStatsEntry   OBJECT-TYPE
    SYNTAX      SapPortIdIngQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the ingress statistics about a specific SAP's
         QoS queue. Entries are created when a arbiter policy is applied to a
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapPortIdIngQosArbitName,
        sapPortIdIngPortId
    }
    ::= { sapPortIdIngQosArbitStatsTable 1 }

SapPortIdIngQosArbitStatsEntry   ::= SEQUENCE
{
    sapPortIdIngQosArbitName         TNamedItem,
    sapPortIdIngQosArbitFwdPkts      Counter64,
    sapPortIdIngQosArbitFwdOcts      Counter64,
    sapPortIdIngQosArbitFwdPktsLo    Counter32,
    sapPortIdIngQosArbitFwdPktsHi    Counter32,
    sapPortIdIngQosArbitFwdOctsLo    Counter32,
    sapPortIdIngQosArbitFwdOctsHi    Counter32
}

sapPortIdIngQosArbitName         OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitName is used as an index of the
         ingress QoS arbiter of this SAP."
    ::= { sapPortIdIngQosArbitStatsEntry 1 }

sapPortIdIngQosArbitFwdPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitFwdPkts indicates the number of
         forwarded packets, as determined by the SAP ingress arbiter policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdIngQosArbitStatsEntry 2 }

sapPortIdIngQosArbitFwdOcts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitFwdOcts indicates the number of
         forwarded octets,as determined by the SAP ingress arbiter policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdIngQosArbitStatsEntry 3 }

sapPortIdIngQosArbitFwdPktsLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitFwdPktsLo indicates the lower 32 bits
         of sapPortIdIngQosArbitFwdPkts."
    ::= { sapPortIdIngQosArbitStatsEntry 4 }

sapPortIdIngQosArbitFwdPktsHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitFwdPktsHi indicates the upper 32 bits
         of sapPortIdIngQosArbitFwdPkts."
    ::= { sapPortIdIngQosArbitStatsEntry 5 }

sapPortIdIngQosArbitFwdOctsLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitFwdOctsLo indicates the lower 32 bits
         of sapPortIdIngQosArbitFwdOcts."
    ::= { sapPortIdIngQosArbitStatsEntry 6 }

sapPortIdIngQosArbitFwdOctsHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdIngQosArbitFwdOctsHi indicates the upper 32 bits
         of sapPortIdIngQosArbitFwdOcts."
    ::= { sapPortIdIngQosArbitStatsEntry 7 }

sapPortIdEgrQosArbitStatsTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPortIdEgrQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdEgrQosArbitStatsTable contains egress QoS
         queue SAP statistics. This table is used when the SAP
         is  a CCAG or LAG in 'link' mode, or an APS."
    ::= { tmnxSapObjs 112 }

sapPortIdEgrQosArbitStatsEntry   OBJECT-TYPE
    SYNTAX      SapPortIdEgrQosArbitStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the egress statistics about a specific SAP's QoS
         queue. Entries are created when a arbiter policy is applied to a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapPortIdEgrQosArbitName,
        sapPortIdEgrPortId
    }
    ::= { sapPortIdEgrQosArbitStatsTable 1 }

SapPortIdEgrQosArbitStatsEntry   ::= SEQUENCE
{
    sapPortIdEgrQosArbitName         TNamedItem,
    sapPortIdEgrQosArbitFwdPkts      Counter64,
    sapPortIdEgrQosArbitFwdOcts      Counter64,
    sapPortIdEgrQosArbitFwdPktsLo    Counter32,
    sapPortIdEgrQosArbitFwdPktsHi    Counter32,
    sapPortIdEgrQosArbitFwdOctsLo    Counter32,
    sapPortIdEgrQosArbitFwdOctsHi    Counter32
}

sapPortIdEgrQosArbitName         OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitName is used as an index of the
         egress QoS arbiter of this SAP."
    ::= { sapPortIdEgrQosArbitStatsEntry 1 }

sapPortIdEgrQosArbitFwdPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitFwdPkts indicates the number of
         forwarded packets, as determined by the SAP egress arbiter policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdEgrQosArbitStatsEntry 2 }

sapPortIdEgrQosArbitFwdOcts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitFwdOcts indicates the number of
         forwarded octets,as determined by the SAP egress arbiter policy,
         offered by the Pchip to the Qchip."
    ::= { sapPortIdEgrQosArbitStatsEntry 3 }

sapPortIdEgrQosArbitFwdPktsLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitFwdPktsLo indicates the lower 32 bits
         of sapPortIdEgrQosArbitFwdPkts."
    ::= { sapPortIdEgrQosArbitStatsEntry 4 }

sapPortIdEgrQosArbitFwdPktsHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitFwdPktsHi indicates the upper 32 bits
         of sapPortIdEgrQosArbitFwdPkts."
    ::= { sapPortIdEgrQosArbitStatsEntry 5 }

sapPortIdEgrQosArbitFwdOctsLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitFwdOctsLo indicates the lower 32 bits
         of sapPortIdEgrQosArbitFwdOcts."
    ::= { sapPortIdEgrQosArbitStatsEntry 6 }

sapPortIdEgrQosArbitFwdOctsHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrQosArbitFwdOctsHi indicates the upper 32 bits
         of sapPortIdEgrQosArbitFwdOcts."
    ::= { sapPortIdEgrQosArbitStatsEntry 7 }

tmnxGreTunnelTableLastChanged    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelTableLastChanged indicates the sysUpTime at
         the time of the last modification to tmnxGreTunnelTable by adding,
         deleting an entry or change to a writable object in the table.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 113 }

tmnxGreTunnelTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxGreTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Table to store the GRE Tunnel entries."
    ::= { tmnxSapObjs 114 }

tmnxGreTunnelEntry               OBJECT-TYPE
    SYNTAX      TmnxGreTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Information about a single GRE Tunnel entry."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxGreTunnelName
    }
    ::= { tmnxGreTunnelTable 1 }

TmnxGreTunnelEntry               ::= SEQUENCE
{
    tmnxGreTunnelName                TNamedItem,
    tmnxGreTunnelRowStatus           RowStatus,
    tmnxGreTunnelLastChanged         TimeStamp,
    tmnxGreTunnelDstIpAddrType       InetAddressType,
    tmnxGreTunnelDstIpAddr           InetAddress,
    tmnxGreTunnelDescription         TItemDescription,
    tmnxGreTunnelLclIpAddrType       InetAddressType,
    tmnxGreTunnelLclIpAddr           InetAddress,
    tmnxGreTunnelRemIpAddrType       InetAddressType,
    tmnxGreTunnelRemIpAddr           InetAddress,
    tmnxGreTunnelBackupRemIpAddrType InetAddressType,
    tmnxGreTunnelBackupRemIpAddr     InetAddress,
    tmnxGreTunnelOperRemIpAddrType   InetAddressType,
    tmnxGreTunnelOperRemIpAddr       InetAddress,
    tmnxGreTunnelDeliverySvcId       TmnxServId,
    tmnxGreTunnelAdminState          TmnxAdminState,
    tmnxGreTunnelOperState           TmnxOperState,
    tmnxGreTunnelOperFlags           BITS,
    tmnxGreTunnelDscp                TDSCPNameOrEmpty,
    tmnxGreTunnelReassembly          Integer32,
    tmnxGreTunnelClearDfBit          TruthValue,
    tmnxGreTunnelIpMtu               Unsigned32,
    tmnxGreTunnelHostISA             TmnxHwIndexOrZero
}

tmnxGreTunnelName                OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelName specifies the name of the tunnel and is
         part of the index for the table tmnxGreTunnelTable."
    ::= { tmnxGreTunnelEntry 1 }

tmnxGreTunnelRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The tmnxGreTunnelRowStatus object is used to create and delete rows in
         the tmnxGreTunnelTable."
    ::= { tmnxGreTunnelEntry 2 }

tmnxGreTunnelLastChanged         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelLastChanged indicates the sysUpTime at the
         time of the last modification of this entry."
    ::= { tmnxGreTunnelEntry 3 }

tmnxGreTunnelDstIpAddrType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelDstIpAddrType specifies the address type of
         address in tmnxGreTunnelDstIpAddr.

         This object must be set at the time of creation of an entry."
    ::= { tmnxGreTunnelEntry 4 }

tmnxGreTunnelDstIpAddr           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelDstIpAddr specifies the address of the
         destination of this GRE tunnel.

         This object must be set at the time of creation of an entry."
    ::= { tmnxGreTunnelEntry 5 }

tmnxGreTunnelDescription         OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelDescription specifies the user-provided
         description for each tmnxGreTunnelEntry in the table
         tmnxGreTunnelTable."
    DEFVAL      { "" }
    ::= { tmnxGreTunnelEntry 6 }

tmnxGreTunnelLclIpAddrType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelLclIpAddrType specifies the address type of
         address in tmnxGreTunnelLclIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxGreTunnelEntry 7 }

tmnxGreTunnelLclIpAddr           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelLclIpAddr specifies the address of the local
         endpoint of this GRE tunnel."
    DEFVAL      { ''H }
    ::= { tmnxGreTunnelEntry 8 }

tmnxGreTunnelRemIpAddrType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelRemIpAddrType specifies the address type of
         address in tmnxGreTunnelRemIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxGreTunnelEntry 9 }

tmnxGreTunnelRemIpAddr           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelRemIpAddr specifies the address of the
         remote endpoint of this GRE tunnel."
    DEFVAL      { ''H }
    ::= { tmnxGreTunnelEntry 10 }

tmnxGreTunnelBackupRemIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBackupRemIpAddrType specifies the address
         type of address in tmnxGreTunnelBackupRemIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxGreTunnelEntry 11 }

tmnxGreTunnelBackupRemIpAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBackupRemIpAddr specifies the address of the
         backup remote endpoint of this GRE tunnel."
    DEFVAL      { ''H }
    ::= { tmnxGreTunnelEntry 12 }

tmnxGreTunnelOperRemIpAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelOperRemIpAddrType indicates the address type
         of address in tmnxGreTunnelOperRemIpAddr."
    ::= { tmnxGreTunnelEntry 13 }

tmnxGreTunnelOperRemIpAddr       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelOperRemIpAddr indicates the address of the
         operational remote endpoint of this GRE tunnel."
    ::= { tmnxGreTunnelEntry 14 }

tmnxGreTunnelDeliverySvcId       OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelDeliverySvcId specifies the service-id of
         the tunnel delivery service."
    DEFVAL      { 0 }
    ::= { tmnxGreTunnelEntry 15 }

tmnxGreTunnelAdminState          OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelAdminState specifies the administrative
         state of the tmnxGreTunnelEntry."
    DEFVAL      { outOfService }
    ::= { tmnxGreTunnelEntry 16 }

tmnxGreTunnelOperState           OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelOperState indicates the operational status
         of tmnxGreTunnelEntry."
    ::= { tmnxGreTunnelEntry 17 }

tmnxGreTunnelOperFlags           OBJECT-TYPE
    SYNTAX      BITS {
        unresolvedLocalIp     (0),
        tunnelAdminDown       (1),
        sapDown               (2),
        unresolvedDeliverySvc (3),
        reserved              (4),
        remIpUnreachable      (5),
        unresolvedDstIp       (6)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelOperFlags indicates the reason why the
         tunnel is operationally down."
    ::= { tmnxGreTunnelEntry 18 }

tmnxGreTunnelDscp                OBJECT-TYPE
    SYNTAX      TDSCPNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelDscp specifies DSCP value which will be used
         in the GRE tunnel carrying IP header in the delivery service."
    DEFVAL      { "" }
    ::= { tmnxGreTunnelEntry 19 }

tmnxGreTunnelReassembly          OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..5000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelReassembly specifies the maximum number of
         seconds to wait to receive all fragments of a particular IPSec or GRE
         packet for reassembly.

         The tmnxGreTunnelReassembly value set to zero indicates that
         reassembly is disabled.

         The tmnxGreTunnelReassembly value set default indicates that this
         value will be derived from the value of
         TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object.

         An 'inconsistentValue' error is returned if the value is not a
         multiple of 100 milliseconds."
    DEFVAL      { -1 }
    ::= { tmnxGreTunnelEntry 20 }

tmnxGreTunnelClearDfBit          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelClearDfBit specifies whether to clear Do not
         Fragment (DF) bit in the outgoing packets in this GRE tunnel."
    DEFVAL      { false }
    ::= { tmnxGreTunnelEntry 21 }

tmnxGreTunnelIpMtu               OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 512..9000)
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelIpMtu specifies the MTU size for IP packets
         for this GRE tunnel.

         A value set to zero indicates maximum supported MTU size on the SAP
         for this GRE tunnel."
    DEFVAL      { 0 }
    ::= { tmnxGreTunnelEntry 22 }

tmnxGreTunnelHostISA             OBJECT-TYPE
    SYNTAX      TmnxHwIndexOrZero
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelHostISA indicates the active ISA that is
         being used to host this GRE tunnel.

         This object will have a value of zero when this tunnel is
         operationally down."
    ::= { tmnxGreTunnelEntry 23 }

tmnxGreTunnelStatsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxGreTunnelStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Table to store GRE Tunnel statistics"
    ::= { tmnxSapObjs 115 }

tmnxGreTunnelStatsEntry          OBJECT-TYPE
    SYNTAX      TmnxGreTunnelStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Statistics for a single GRE Tunnel."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxGreTunnelName
    }
    ::= { tmnxGreTunnelStatsTable 1 }

TmnxGreTunnelStatsEntry          ::= SEQUENCE
{
    tmnxGreTunnelPktsTx              Counter64,
    tmnxGreTunnelPktsTxLo            Counter32,
    tmnxGreTunnelPktsTxHi            Counter32,
    tmnxGreTunnelPktsRx              Counter64,
    tmnxGreTunnelPktsRxLo            Counter32,
    tmnxGreTunnelPktsRxHi            Counter32,
    tmnxGreTunnelBytesTx             Counter64,
    tmnxGreTunnelBytesTxLo           Counter32,
    tmnxGreTunnelBytesTxHi           Counter32,
    tmnxGreTunnelBytesRx             Counter64,
    tmnxGreTunnelBytesRxLo           Counter32,
    tmnxGreTunnelBytesRxHi           Counter32,
    tmnxGreTunnelTxErrors            Counter32,
    tmnxGreTunnelRxErrors            Counter32,
    tmnxGreTunnelKeyIgnoredRx        Counter64,
    tmnxGreTunnelKeyIgnoredRxLo      Counter32,
    tmnxGreTunnelKeyIgnoredRxHi      Counter32,
    tmnxGreTunnelSeqIgnoredRx        Counter64,
    tmnxGreTunnelSeqIgnoredRxLo      Counter32,
    tmnxGreTunnelSeqIgnoredRxHi      Counter32,
    tmnxGreTunnelVersUnsupRx         Counter64,
    tmnxGreTunnelVersUnsupRxLo       Counter32,
    tmnxGreTunnelVersUnsupRxHi       Counter32,
    tmnxGreTunnelInvalidChksumRx     Counter64,
    tmnxGreTunnelInvalidChksumRxLo   Counter32,
    tmnxGreTunnelInvalidChksumRxHi   Counter32,
    tmnxGreTunnelLoopsRx             Counter64,
    tmnxGreTunnelLoopsRxLo           Counter32,
    tmnxGreTunnelLoopsRxHi           Counter32,
    tmnxGreTunnelTooBigTx            Counter64,
    tmnxGreTunnelTooBigTxLo          Counter32,
    tmnxGreTunnelTooBigTxHi          Counter32
}

tmnxGreTunnelPktsTx              OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelPktsTx indicates the number of packets this
         GRE Tunnel has sent."
    ::= { tmnxGreTunnelStatsEntry 1 }

tmnxGreTunnelPktsTxLo            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelPktsTxLo indicates lower 32 bits of the
         value of tmnxGreTunnelPktsTx object."
    ::= { tmnxGreTunnelStatsEntry 2 }

tmnxGreTunnelPktsTxHi            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelPktsTxHi indicates higher 32 bits of the
         value of tmnxGreTunnelPktsTx object."
    ::= { tmnxGreTunnelStatsEntry 3 }

tmnxGreTunnelPktsRx              OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelPktsRx indicates the number of packets this
         GRE Tunnel has received."
    ::= { tmnxGreTunnelStatsEntry 4 }

tmnxGreTunnelPktsRxLo            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelPktsRxLo indicates lower 32 bits of the
         value of tmnxGreTunnelPktsRx object."
    ::= { tmnxGreTunnelStatsEntry 5 }

tmnxGreTunnelPktsRxHi            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelPktsRxHi indicates higher 32 bits of the
         value of tmnxGreTunnelPktsRx object."
    ::= { tmnxGreTunnelStatsEntry 6 }

tmnxGreTunnelBytesTx             OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBytesTx indicates the number of bytes this
         GRE Tunnel has sent."
    ::= { tmnxGreTunnelStatsEntry 7 }

tmnxGreTunnelBytesTxLo           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBytesTxLo indicates lower 32 bits of the
         value of tmnxGreTunnelBytesTx object."
    ::= { tmnxGreTunnelStatsEntry 8 }

tmnxGreTunnelBytesTxHi           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBytesTxHi indicates higher 32 bits of the
         value of tmnxGreTunnelBytesTx object."
    ::= { tmnxGreTunnelStatsEntry 9 }

tmnxGreTunnelBytesRx             OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBytesRx indicates the number of bytes this
         GRE Tunnel has received."
    ::= { tmnxGreTunnelStatsEntry 10 }

tmnxGreTunnelBytesRxLo           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBytesRxLo indicates lower 32 bits of the
         value of tmnxGreTunnelBytesRx object."
    ::= { tmnxGreTunnelStatsEntry 11 }

tmnxGreTunnelBytesRxHi           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelBytesRxHi indicates higher 32 bits of the
         value of tmnxGreTunnelBytesRx object."
    ::= { tmnxGreTunnelStatsEntry 12 }

tmnxGreTunnelTxErrors            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelTxErrors indicates the number of packet
         transmit errors."
    ::= { tmnxGreTunnelStatsEntry 13 }

tmnxGreTunnelRxErrors            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelRxErrors indicates the number of packet
         receive errors."
    ::= { tmnxGreTunnelStatsEntry 14 }

tmnxGreTunnelKeyIgnoredRx        OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelKeyIgnoredRx indicates the number of packets
         this GRE Tunnel received and processed ignoring key field."
    ::= { tmnxGreTunnelStatsEntry 15 }

tmnxGreTunnelKeyIgnoredRxLo      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelKeyIgnoredRxLo indicates lower 32 bits of
         the value of tmnxGreTunnelKeyIgnoredRx object."
    ::= { tmnxGreTunnelStatsEntry 16 }

tmnxGreTunnelKeyIgnoredRxHi      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelKeyIgnoredRxHi indicates higher 32 bits of
         the value of tmnxGreTunnelKeyIgnoredRx object."
    ::= { tmnxGreTunnelStatsEntry 17 }

tmnxGreTunnelSeqIgnoredRx        OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelSeqIgnoredRx indicates the number of packets
         this GRE Tunnel and processed ignoring sequence field."
    ::= { tmnxGreTunnelStatsEntry 18 }

tmnxGreTunnelSeqIgnoredRxLo      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelSeqIgnoredRxLo indicates lower 32 bits of
         the value of tmnxGreTunnelSeqIgnoredRx object."
    ::= { tmnxGreTunnelStatsEntry 19 }

tmnxGreTunnelSeqIgnoredRxHi      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelSeqIgnoredRxHi indicates higher 32 bits of
         the value of tmnxGreTunnelSeqIgnoredRx object."
    ::= { tmnxGreTunnelStatsEntry 20 }

tmnxGreTunnelVersUnsupRx         OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelVersUnsupRx indicates the number of packets
         this GRE Tunnel received with unsupported GRE version and were
         dropped."
    ::= { tmnxGreTunnelStatsEntry 21 }

tmnxGreTunnelVersUnsupRxLo       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelVersUnsupRxLo indicates lower 32 bits of the
         value of tmnxGreTunnelVersUnsupRx object."
    ::= { tmnxGreTunnelStatsEntry 22 }

tmnxGreTunnelVersUnsupRxHi       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelVersUnsupRxHi indicates higher 32 bits of
         the value of tmnxGreTunnelVersUnsupRx object."
    ::= { tmnxGreTunnelStatsEntry 23 }

tmnxGreTunnelInvalidChksumRx     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelInvalidChksumRx indicates the number of
         packets this GRE Tunnel received with invalid checksum and were
         dropped."
    ::= { tmnxGreTunnelStatsEntry 24 }

tmnxGreTunnelInvalidChksumRxLo   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelInvalidChksumRxLo indicates lower 32 bits of
         the value of tmnxGreTunnelInvalidChksumRx object."
    ::= { tmnxGreTunnelStatsEntry 25 }

tmnxGreTunnelInvalidChksumRxHi   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelInvalidChksumRxHi indicates higher 32 bits
         of the value of tmnxGreTunnelInvalidChksumRx object."
    ::= { tmnxGreTunnelStatsEntry 26 }

tmnxGreTunnelLoopsRx             OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelLoopsRx indicates the number of packets this
         GRE Tunnel received with payload with destination address which could
         result in a loop and were dropped."
    ::= { tmnxGreTunnelStatsEntry 27 }

tmnxGreTunnelLoopsRxLo           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelLoopsRxLo indicates lower 32 bits of the
         value of tmnxGreTunnelLoopsRx object."
    ::= { tmnxGreTunnelStatsEntry 28 }

tmnxGreTunnelLoopsRxHi           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelLoopsRxHi indicates higher 32 bits of the
         value of tmnxGreTunnelLoopsRx object."
    ::= { tmnxGreTunnelStatsEntry 29 }

tmnxGreTunnelTooBigTx            OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelTooBigTx indicates the number of packets
         this GRE Tunnel received which were too big to transmit."
    ::= { tmnxGreTunnelStatsEntry 30 }

tmnxGreTunnelTooBigTxLo          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelTooBigTxLo indicates lower 32 bits of the
         value of tmnxGreTunnelTooBigTx object."
    ::= { tmnxGreTunnelStatsEntry 31 }

tmnxGreTunnelTooBigTxHi          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxGreTunnelTooBigTxHi indicates higher 32 bits of the
         value of tmnxGreTunnelTooBigTx object."
    ::= { tmnxGreTunnelStatsEntry 32 }

sapAtmVcRangeTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapAtmVcRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The  sapAtmVcRangeTable contains ATM Virtual Circuit ranges
         for ATM Capture SAPs.

         Entries in this table can be created or deleted via SNMP operations.

         For a given ATM Capture SAP, the maximum number of ATM VC ranges is
         limited to 5."
    ::= { tmnxSapObjs 116 }

sapAtmVcRangeEntry               OBJECT-TYPE
    SYNTAX      SapAtmVcRangeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents an ATM Virtual Circuit range."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapAtmVcRangeIndex
    }
    ::= { sapAtmVcRangeTable 1 }

SapAtmVcRangeEntry               ::= SEQUENCE
{
    sapAtmVcRangeIndex               Unsigned32,
    sapAtmVcRangeRowStatus           RowStatus,
    sapAtmVcRangeLastMgmtChange      TimeStamp,
    sapAtmVcRangeVpiStart            AtmVpIdentifier,
    sapAtmVcRangeVpiEnd              AtmVpIdentifier,
    sapAtmVcRangeVciStart            AtmVcIdentifier,
    sapAtmVcRangeVciEnd              AtmVcIdentifier
}

sapAtmVcRangeIndex               OBJECT-TYPE
    SYNTAX      Unsigned32 (1..5)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeIndex specifies the identifier of this ATM
         Virtual Circuit Range."
    ::= { sapAtmVcRangeEntry 1 }

sapAtmVcRangeRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeRowStatus specifies the row status of this
         row."
    ::= { sapAtmVcRangeEntry 2 }

sapAtmVcRangeLastMgmtChange      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeLastMgmtChange indicates the sysUpTime at
         the time of the most recent management-initiated change to this table
         row."
    ::= { sapAtmVcRangeEntry 3 }

sapAtmVcRangeVpiStart            OBJECT-TYPE
    SYNTAX      AtmVpIdentifier
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeVpiStart specifies the start Virtual Path
         Identifier (VPI) of this range."
    ::= { sapAtmVcRangeEntry 4 }

sapAtmVcRangeVpiEnd              OBJECT-TYPE
    SYNTAX      AtmVpIdentifier
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeVpiEnd specifies the end Virtual Path
         Identifier (VPI) of this range."
    ::= { sapAtmVcRangeEntry 5 }

sapAtmVcRangeVciStart            OBJECT-TYPE
    SYNTAX      AtmVcIdentifier (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeVciStart specifies the start Virtual Circuit
         Identifier (VCI) of this range."
    ::= { sapAtmVcRangeEntry 6 }

sapAtmVcRangeVciEnd              OBJECT-TYPE
    SYNTAX      AtmVcIdentifier (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapAtmVcRangeVciEnd specifies the end Virtual Circuit
         Identifier (VCI) of this range."
    ::= { sapAtmVcRangeEntry 7 }

msapAtmPlcyTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF MsapAtmPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The msapAtmPlcyTable has an entry for each managed SAP (MSAP) policy
         configured in the system."
    ::= { tmnxSapObjs 117 }

msapAtmPlcyEntry                 OBJECT-TYPE
    SYNTAX      MsapAtmPlcyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the ATM-related configuration for a managed SAP
         (MSAP) policy.

         Entries in this table are created and destroyed automatically by the
         system."
    AUGMENTS    { msapPlcyEntry }
    ::= { msapAtmPlcyTable 1 }

MsapAtmPlcyEntry                 ::= SEQUENCE
{
    msapAtmPlcyLastChanged           TimeStamp,
    msapAtmPlcyIngTrafficDescIndex   AtmTrafficDescrParamIndex,
    msapAtmPlcyEgrTrafficDescIndex   AtmTrafficDescrParamIndex,
    msapAtmPlcyOamAlarmCellHandling  ServiceAdminStatus,
    msapAtmPlcyOamPeriodicLoopback   ServiceAdminStatus
}

msapAtmPlcyLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapAtmPlcyLastChanged indicates the sysUpTime at the
         time of the last modification of this entry.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { msapAtmPlcyEntry 1 }

msapAtmPlcyIngTrafficDescIndex   OBJECT-TYPE
    SYNTAX      AtmTrafficDescrParamIndex (1..1000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapAtmPlcyIngTrafficDescIndex specifies the index of the
         ATM traffic descriptor in the ATM traffic data encapsulation used for
         the ingress direction over the AAL5 SSCS layer.

         The definition references RFC 2684 Multiprotocol Encapsulation over
         ATM AAL5 and to the ATM Forum LAN Emulation specification."
    DEFVAL      { 1 }
    ::= { msapAtmPlcyEntry 2 }

msapAtmPlcyEgrTrafficDescIndex   OBJECT-TYPE
    SYNTAX      AtmTrafficDescrParamIndex (1..1000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapAtmPlcyEgrTrafficDescIndex specifies the index of the
         ATM traffic descriptor in the ATM traffic data encapsulation used for
         the egress direction over the AAL5 SSCS layer.

         The definition references RFC 2684 Multiprotocol Encapsulation over
         ATM AAL5 and to the ATM Forum LAN Emulation specification."
    DEFVAL      { 1 }
    ::= { msapAtmPlcyEntry 3 }

msapAtmPlcyOamAlarmCellHandling  OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapAtmPlcyOamAlarmCellHandling specifies the
         administrative state of the OAM Alarm Cell handling.

         A value of 'up' specifies that the OAM status of a PVC (Permanent
         Virtual Circuit) affects the MSAP operational status and OAM AIS/RDI
         cell generation upon an MSAP operational status of down.

         A value of 'down' specifies that the OAM status of a PVC will not
         affect the operational status of the associated MSAP and no OAM
         AIS/RDI cells are generated."
    DEFVAL      { up }
    ::= { msapAtmPlcyEntry 4 }

msapAtmPlcyOamPeriodicLoopback   OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of msapAtmPlcyOamPeriodicLoopback specifies if the MSAP will
         run periodic OAM loopbacks.

         If enabled, an ATM OAM loopback cell will be transmitted every period
         as configured in tAtmSysOamLoopbackPeriod; if a response is not
         received and tAtmSysOamRetryDown consecutive retries also result in
         failure, the endpoint will transition to the eteAisLoc state; once in
         the eteAisLoc state, an ATM OAM loopback cell will be transmitted
         every period as configured in tAtmSysOamLoopbackPeriod; if a response
         is received for the periodic loopback and tAtmSysOamRetryUp
         consecutive retries also each receive a response, the endpoint will
         transition back to the up state."
    DEFVAL      { down }
    ::= { msapAtmPlcyEntry 5 }

msapAtmPlcyTblLastChgd           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of msapAtmPlcyTblLastChgd indicates the sysUpTime at the
         time of the last modification of msapAtmPlcyTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 118 }

sapEthCfmTblLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmTblLastChanged indicates the sysUpTime at the
         time of the last modification of the sapEthCfmTable."
    ::= { tmnxSapObjs 119 }

sapEthCfmTable                   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEthCfmEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEthCfmTable consists of the information pertaining to Ethernet
         Connectivity Fault Management (CFM) for Service Access Points (SAPs).

         This table is a sparse dependent extension of the sapBaseInfoTable."
    ::= { tmnxSapObjs 120 }

sapEthCfmEntry                   OBJECT-TYPE
    SYNTAX      SapEthCfmEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEthCfmEntry contains the Ethernet CFM information for a given
         Ethernet encapsulated SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapEthCfmTable 1 }

SapEthCfmEntry                   ::= SEQUENCE
{
    sapEthCfmRowLastChanged          TimeStamp,
    sapEthCfmTunnelFaultNotification INTEGER,
    sapEthCfmMcLagPropHoldTimeRemain Unsigned32,
    sapEthCfmAisEnable               TruthValue,
    sapEthCfmVMepFilter              TruthValue,
    sapEthCfmSquelchIngress          BITS,
    sapEthCfmCollectLmmStats         TruthValue,
    sapEthCfmCollLmmFcSts            TFCSet,
    sapEthCfmCollLmmFcStsInP         TFCSet,
    sapEthCfmSquelchIngressCtag      BITS
}

sapEthCfmRowLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmRowLastChanged indicates the sysUpTime at the
         time of the last modification to an object for this row.

         If no changes were made to the entry since the instantiation of the
         row, then this object contains a zero value."
    ::= { sapEthCfmEntry 1 }

sapEthCfmTunnelFaultNotification OBJECT-TYPE
    SYNTAX      INTEGER {
        notApplicable (0),
        accept        (1),
        ignore        (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmTunnelFaultNotification specifies whether the
         SAP will 'accept (1)' CFM fault notifications from a Tunnel MEP and
         process the notifications (i.e. do fault handling and/or fault
         propagation), or 'ignore (2)' the notification.

         Both TIMETRA-SERV-MIB::svcEthCfmTunnelFaultNotification and this
         object MUST be set to 'accept (1)' for the SAP to process the
         notification.

         The value 'notApplicable (0)' is used by the system to represent a SAP
         which supports ETH-CFM, but not this object. An SNMP Set attempting to
         change this object to this value will result in an wrongValue error."
    DEFVAL      { accept }
    ::= { sapEthCfmEntry 2 }

sapEthCfmMcLagPropHoldTimeRemain OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmMcLagPropHoldTimeRemain indicates the remaining
         time, in seconds, until MEPs on this SAP will react to a Multi-Chassis
         LAG protocol or port change. The value zero (0) indicates there are no
         pending events, or the SAP is not a MC-LAG SAP.

         This object corresponds to the global configuration timer:
            TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime."
    ::= { sapEthCfmEntry 3 }

sapEthCfmAisEnable               OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmAisEnable specifies whether or not AIS frames
         are generated for the SAP based on a facility fault."
    DEFVAL      { false }
    ::= { sapEthCfmEntry 4 }

sapEthCfmVMepFilter              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmVMepFilter specifies whether ETH-CFM PDUs
         egressing the sap or sdp-binding at the same level or lower than that
         of the configured service MEP (the virtual MEP) should be discarded or
         continue to egress.

         Only PDUs that were originated from the virtual MEP or from the
         networks side of the service will be affected, local down MEP ETH-CFM
         transmission are not.  When set to 'true' ETH-CFM PDUs with the same or
         lower level as the virtual MEP will be discarded.  When set to 'false',
         egressing ETH-CFM PDUs will pass freely as per the existing ETH-CFM
         configuration."
    DEFVAL      { false }
    ::= { sapEthCfmEntry 5 }

sapEthCfmSquelchIngress          OBJECT-TYPE
    SYNTAX      BITS {
        level0 (0),
        level1 (1),
        level2 (2),
        level3 (3),
        level4 (4),
        level5 (5),
        level6 (6),
        level7 (7)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmSquelchIngress specifies the ETH-CFM level or
         levels that are silently discarded on ingress to the SAP. Any received
         ETH-CFM PDU matching a level that has been set will be dropped without
         regard for any other ETH-CFM criteria.

         No statistical information or drop count will be available for any
         ETH-CFM PDU that is silently discarded by this option."
    DEFVAL      { {} }
    ::= { sapEthCfmEntry 6 }

sapEthCfmCollectLmmStats         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmCollectLmmStats specifies whether or not to
         compute the Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and
         TxFCl service frame counters for the specified SAP.  Note that
         when sapEthCfmCollectLmmStats is set to 'true', all data traffic
         regardless of forwarding class level, both in and out of profile,
         will be aggregated to a single stat counter.

         Configuration of sapEthCfmCollectLmmStats is mutually exclusive with
         the forwarding class level aware objects sapEthCfmCollLmmFcSts and
         sapEthCfmCollLmmFcStsInP.

         The RxFCl and TxFCl counters are used by ETH-LM tests.  An ETH-LM
         test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus."
    REFERENCE
        "ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based
         networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'."
    DEFVAL      { false }
    ::= { sapEthCfmEntry 7 }

sapEthCfmCollLmmFcSts            OBJECT-TYPE
    SYNTAX      TFCSet
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmCollLmmFcSts specifies which forwarding class
         levels (in and out of profile combined) have enabled the computation
         for Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service
         frame counters for the specified SAP. If the bit corresponding to a
         forwarding class level is set, then a unique counter will be used to
         track all the combined in and out of profile traffic associated with
         that forwarding class.

         Note that no sapEthCfmCollLmmFcSts bits can be set if
         sapEthCfmCollectLmmStats is set to 'true' as the two are mutually
         exclusive.

         The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test
         is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus."
    REFERENCE
        "ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based
         networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'."
    DEFVAL      { {} }
    ::= { sapEthCfmEntry 8 }

sapEthCfmCollLmmFcStsInP         OBJECT-TYPE
    SYNTAX      TFCSet
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmCollLmmFcStsInP specifies which forwarding class
         levels (in profile only) have enabled the computation for Y.1731
         Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame
         counters for the specified SAP. If the bit corresponding to a
         forwarding class level is set, then a unique counter will be used to
         track only all the in profile data traffic that is associated with
         that forwarding class.

         Note that no sapEthCfmCollLmmFcStsInP bits can be set if
         sapEthCfmCollectLmmStats is set to 'true' as the two are mutually
         exclusive.

         The RxFCl and TxFCl counters are used by ETH-LM tests.  An ETH-LM
         test is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus."
    REFERENCE
        "ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based
         networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'."
    DEFVAL      { {} }
    ::= { sapEthCfmEntry 9 }

sapEthCfmSquelchIngressCtag      OBJECT-TYPE
    SYNTAX      BITS {
        level0 (0),
        level1 (1),
        level2 (2),
        level3 (3),
        level4 (4),
        level5 (5),
        level6 (6),
        level7 (7)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEthCfmSquelchIngressCtag specifies the ETH-CFM level
         or levels of the ETH-CFM PDUs that are silently discarded using
         additional VLAN space immediately following ingress service
         delineation.

         Any received ETH-CFM PDU matching a level that has been set will be
         dropped without regard for the vlan-id in that additional space.

         No statistical information or drop count will be available for any
         ETH-CFM PDU that is silently discarded by this option."
    DEFVAL      { {} }
    ::= { sapEthCfmEntry 10 }

sapEgrEncapGroupTblLastChgd      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEgrEncapGroupTblLastChgd indicates the timestamp of last change to
         the sapEgrEncapGroupTable."
    ::= { tmnxSapObjs 121 }

sapEgrEncapGroupTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEncapGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP egress encapsulation group information."
    ::= { tmnxSapObjs 122 }

sapEgrEncapGroupEntry            OBJECT-TYPE
    SYNTAX      SapEgrEncapGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Encapsulation group information about a specific group of the SAP on
         the egress side."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName
    }
    ::= { sapEgrEncapGroupTable 1 }

SapEgrEncapGroupEntry            ::= SEQUENCE
{
    sapEgrEncapGroupName             TNamedItem,
    sapEgrEncapGroupRowStatus        RowStatus,
    sapEgrEncapGroupLastChanged      TimeStamp,
    sapEgrEncapGroupType             TSapEgrEncapGroupType,
    sapEgrEncapGroupQosPerMember     TruthValue,
    sapEgrEncapGroupQosPolicyId      TSapEgrEncapGrpQosPolicyIdOrZero,
    sapEgrEncapGroupSchedulerPolicy  TNamedItemOrEmpty,
    sapEgrEncapGroupAggRateLimit     TPortSchedulerAggRateLimitPIR,
    sapEgrEncapGrpFrameBasedAccnt    TruthValue,
    sapEgrEncapGroupAggRateLUB       TruthValue,
    sapEgrEncapGrpAggRateLimitHi     TmnxQosRateHigh32,
    sapEgrEncapGrpAggRateLimit       TmnxQosRateLow32
}

sapEgrEncapGroupName             OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEncapGroupName indicates the encapsulation group name on
         this SAP."
    ::= { sapEgrEncapGroupEntry 1 }

sapEgrEncapGroupRowStatus        OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is the Row Status of the entry. This allows creation/deletion of
         rows in this table. To create row entries in this table
         sapEgrEncapGroupType MUST be specified in the same SNMP SET PDU
         request as sapEgrEncapGroupRowStatus or a 'noCreation' error is
         returned."
    ::= { sapEgrEncapGroupEntry 2 }

sapEgrEncapGroupLastChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEgrEncapGroupLastChanged indicates the timestamp of last change to
         this row in sapEgrEncapGroupTable."
    ::= { sapEgrEncapGroupEntry 3 }

sapEgrEncapGroupType             OBJECT-TYPE
    SYNTAX      TSapEgrEncapGroupType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupType specifies the encapsulation group
         type configured on this SAP on egress side. To create row entries in
         this table sapEgrEncapGroupType MUST be specified in the same SNMP SET
         PDU request as sapEgrEncapGroupRowStatus or a 'noCreation' error is
         returned."
    ::= { sapEgrEncapGroupEntry 4 }

sapEgrEncapGroupQosPerMember     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupQosPerMember specifies how the QoS members
         will be added to or deleted from the encapsulation group.  If the value
         of sapEgrEncapGroupQosPerMember is set to 'true', members are added or
         deleted one at a time. If the value of sapEgrEncapGroupQosPerMember is
         set to 'false', members are added to the encapsulation group as a range
         of contiguous values."
    DEFVAL      { false }
    ::= { sapEgrEncapGroupEntry 5 }

sapEgrEncapGroupQosPolicyId      OBJECT-TYPE
    SYNTAX      TSapEgrEncapGrpQosPolicyIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupQosPolicyId specifies the QoS policy id
         of the encapsulation group on this SAP on egress side.

         The value '0' for sapEgrEncapGroupQosPolicyId means that there is no
         QoS policy."
    DEFVAL      { 0 }
    ::= { sapEgrEncapGroupEntry 6 }

sapEgrEncapGroupSchedulerPolicy  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupSchedulerPolicy specifies the name of the
         encapsulation group scheduler policy on this SAP on egress side."
    DEFVAL      { "" }
    ::= { sapEgrEncapGroupEntry 7 }

sapEgrEncapGroupAggRateLimit     OBJECT-TYPE
    SYNTAX      TPortSchedulerAggRateLimitPIR
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of the object sapEgrEncapGroupAggRateLimit specifies the
         maximum total rate of all egress encapsulation groups for this SAP.

         The value '-1' for sapEgrEncapGroupAggRateLimit means that there is no
         limit.

         This object is obsoleted in 13.0 release and replaced by
         sapEgrEncapGrpAggRateLimit."
    DEFVAL      { -1 }
    ::= { sapEgrEncapGroupEntry 8 }

sapEgrEncapGrpFrameBasedAccnt    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGrpFrameBasedAccnt specifies whether to use
         frame-based accounting when evaluating sapEgrEncapGrpAggRateLimit for
         all egress queues for this SAP.

         If the value is 'false', the default packet-based accounting method
         will be used."
    DEFVAL      { false }
    ::= { sapEgrEncapGroupEntry 9 }

sapEgrEncapGroupAggRateLUB       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupAggRateLUB specifies whether to limit the
         unused bandwidth and allow a tighter control in allocation of
         bandwidth by HQos.

         When the value of sapEgrEncapGroupAggRateLUB is set to 'true', HQos
         algorithm distributes any unused aggregate bandwidth between queues
         operating below their fair share rates. This allows a simplified
         aggregate rate protection while allocating bandwidth by HQos
         scheduling algorithm."
    DEFVAL      { false }
    ::= { sapEgrEncapGroupEntry 10 }

sapEgrEncapGrpAggRateLimitHi     OBJECT-TYPE
    SYNTAX      TmnxQosRateHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGrpAggRateLimitHi specifies the upper 32 bits
         of the maximum total rate of all egress encapsulation groups for this
         SAP.

         This value should always be set along with sapEgrEncapGrpAggRateLimit,
         otherwise an 'inconsistentValue' error is returned.

         When the value of sapEgrEncapGrpAggRateLimitHi along with the value of
         sapEgrEncapGrpAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for
         this SAP indicates maximum total rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrEncapGroupEntry 12 }

sapEgrEncapGrpAggRateLimit       OBJECT-TYPE
    SYNTAX      TmnxQosRateLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGrpAggRateLimit specifies the maximum total
         rate of all egress encapsulation groups for this SAP.

         The value of 4294967295 (0xFFFFFFFF) means that there is no limit.

         When the value of sapEgrEncapGrpAggRateLimitHi along with the value of
         sapEgrEncapGrpAggRateLimit is set to 4294967295 (0xFFFFFFFF), rate for
         this SAP indicates maximum total rate."
    DEFVAL      { 4294967295 }
    ::= { sapEgrEncapGroupEntry 13 }

sapEgrEncapGrpMemActTblLastChgd  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "sapEgrEncapGrpMemActTblLastChgd indicates the timestamp of last change
         to the sapEgrEncapGrpMemberActTable."
    ::= { tmnxSapObjs 123 }

sapEgrEncapGrpMemberActTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEncapGrpMemberActEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "sapEgrEncapGrpMemberActTable creates or deletes one or more SAP egress
         encapsulation group member row entries in the sapEgrEncapGrpMemberTable
         by setting a single row in this table.  An SNMP GET on this table will
         always return a 'noSuchInstance' error."
    ::= { tmnxSapObjs 124 }

sapEgrEncapGrpMemberActEntry     OBJECT-TYPE
    SYNTAX      SapEgrEncapGrpMemberActEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Encapsulation group member action information about a specific or a
         range of groups of the SAP on the egress side.

         To create/delete row entries in the sapEgrEncapGrpMemberTable objects
         sapEgrEncapGroupBeginMember, sapEgrEncapGroupEndMember and
         sapEgrEncapGroupMemberAction MUST all be specified in the same SNMP
         SET PDU request or a 'noCreation' error is returned.

         To create/delete a single row entry in the sapEgrEncapGrpMemberTable
         sapEgrEncapGroupEndMember MUST be same as sapEgrEncapGroupBeginMember."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName
    }
    ::= { sapEgrEncapGrpMemberActTable 1 }

SapEgrEncapGrpMemberActEntry     ::= SEQUENCE
{
    sapEgrEncapGroupBeginMember      SvcISID,
    sapEgrEncapGroupEndMember        SvcISID,
    sapEgrEncapGroupMemberAction     TSapEgrEncapGroupActionType
}

sapEgrEncapGroupBeginMember      OBJECT-TYPE
    SYNTAX      SvcISID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupBeginMember specifies the single
         encapsulation member identifier or the start value of encapsulation
         member identifier range."
    ::= { sapEgrEncapGrpMemberActEntry 1 }

sapEgrEncapGroupEndMember        OBJECT-TYPE
    SYNTAX      SvcISID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupEndMember specifies the end value of
         encapsulation member identifier range. The value of
         sapEgrEncapGroupEndMember MUST be greater than that of
         sapEgrEncapGroupBeginMember."
    ::= { sapEgrEncapGrpMemberActEntry 2 }

sapEgrEncapGroupMemberAction     OBJECT-TYPE
    SYNTAX      TSapEgrEncapGroupActionType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGroupMemberAction specifies whether members of
         encapsulation group are created or destroyed.

         An 'inconsistentValue' error is returned if
         sapEgrEncapGroupMemberAction is set and sapEgrEncapGroupBeginMember or
         sapEgrEncapGroupEndMember is not set.

         An 'inconsistentValue' error is returned if sapEgrEncapGroupEndMember
         is set to a value smaller than sapEgrEncapGroupBeginMember."
    ::= { sapEgrEncapGrpMemberActEntry 3 }

sapEgrEncapGrpMemberTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEncapGrpMemberEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP egress encapsulation group member entry
         information.

         The row entries in this table are created or destroyed by SNMP SET
         operations on sapEgrEncapGrpMemberActTable."
    ::= { tmnxSapObjs 126 }

sapEgrEncapGrpMemberEntry        OBJECT-TYPE
    SYNTAX      SapEgrEncapGrpMemberEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Encapsulation group member entry information about a specific group of
         the SAP on the egress side."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEncapGrpMember
    }
    ::= { sapEgrEncapGrpMemberTable 1 }

SapEgrEncapGrpMemberEntry        ::= SEQUENCE
{
    sapEgrEncapGrpMember             SvcISID,
    sapEgrEncapGrpRangeEndId         SvcISID,
    sapEgrEncapGrpMemberLastChanged  TimeStamp
}

sapEgrEncapGrpMember             OBJECT-TYPE
    SYNTAX      SvcISID (0..16777215)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGrpMember indicates the encapsulation member
         identifier of the SAP on the egress side."
    ::= { sapEgrEncapGrpMemberEntry 1 }

sapEgrEncapGrpRangeEndId         OBJECT-TYPE
    SYNTAX      SvcISID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGrpRangeEndId indicates the end value of
         encapsulation member identifier range. When the encapsulation group's
         qos-per-member object is set to true, the value of
         sapEgrEncapGrpRangeEndId is always equal to the sapEgrEncapGrpMember.
         This is because member ranges are not supported when qos-per-member is
         enabled."
    ::= { sapEgrEncapGrpMemberEntry 2 }

sapEgrEncapGrpMemberLastChanged  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEncapGrpMemberLastChanged indicates the timestamp
         of last change to this row in sapEgrEncapGrpMemberEntry."
    ::= { sapEgrEncapGrpMemberEntry 3 }

sapAtmPppStatsTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapAtmPppStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains ATM SAP PPP statistics information."
    ::= { tmnxSapObjs 127 }

sapAtmPppStatsEntry              OBJECT-TYPE
    SYNTAX      SapAtmPppStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "PPP statistics about a specific ATM SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapAtmPppStatsTable 1 }

SapAtmPppStatsEntry              ::= SEQUENCE
{
    sapAtmPppStatsRxPackets          Counter32,
    sapAtmPppStatsRxDropped          Counter32,
    sapAtmPppStatsTxPackets          Counter32
}

sapAtmPppStatsRxPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapAtmPppStatsRxPackets indicates the number of PPP
         packets received on this ATM SAP since the last re-initialization of
         the local network management subsystem, or the last time the
         statistics were cleared."
    ::= { sapAtmPppStatsEntry 1 }

sapAtmPppStatsRxDropped          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapAtmPppStatsRxDropped indicates the number of PPP
         packets dropped on this ATM SAP since the last re-initialization of
         the local network management subsystem, or the last time the
         statistics were cleared."
    ::= { sapAtmPppStatsEntry 2 }

sapAtmPppStatsTxPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapAtmPppStatsTxPackets indicates the number of PPP
         packets transmitted on this ATM SAP since the last re-initialization
         of the local network management subsystem, or the last time the
         statistics were cleared."
    ::= { sapAtmPppStatsEntry 3 }

tmnxSapGlobalObjs                OBJECT IDENTIFIER ::= { tmnxSapObjs 128 }

tmnxSapGreTunnelCount            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapGreTunnelCount indicates the number of GRE tunnels
         operating in the system at this time."
    ::= { tmnxSapGlobalObjs 1 }

sapEgrEGBaseStTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEGBaseStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGBaseStTable contains egress Encap Group basic SAP
         statistics at the Group level. This statistics table is valid for
         Encap Groups created without enabling sapEgrEncapGroupQosPerMember. In
         the descriptions below 'Qchip' refers to the Nokia SROS series QoS
         Queueing Engine chip."
    ::= { tmnxSapObjs 129 }

sapEgrEGBaseStEntry              OBJECT-TYPE
    SYNTAX      SapEgrEGBaseStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific Encap Group of a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName
    }
    ::= { sapEgrEGBaseStTable 1 }

SapEgrEGBaseStEntry              ::= SEQUENCE
{
    sapEgrEGBaseStLastClearedTime    TimeStamp,
    sapEgrEGBaseStCustId             TmnxCustId,
    sapEgrEGBaseStQcDpdInPfPkts      Counter64,
    sapEgrEGBaseStQcDpdInPfPktsL     Counter32,
    sapEgrEGBaseStQcDpdInPfPktsH     Counter32,
    sapEgrEGBaseStQcDpdInPfOcts      Counter64,
    sapEgrEGBaseStQcDpdInPfOctsL     Counter32,
    sapEgrEGBaseStQcDpdInPfOctsH     Counter32,
    sapEgrEGBaseStQcDpdOutPfPkts     Counter64,
    sapEgrEGBaseStQcDpdOutPfPktsL    Counter32,
    sapEgrEGBaseStQcDpdOutPfPktsH    Counter32,
    sapEgrEGBaseStQcDpdOutPfOcts     Counter64,
    sapEgrEGBaseStQcDpdOutPfOctsL    Counter32,
    sapEgrEGBaseStQcDpdOutPfOctsH    Counter32,
    sapEgrEGBaseStQcFwdInPfPkts      Counter64,
    sapEgrEGBaseStQcFwdInPfPktsL     Counter32,
    sapEgrEGBaseStQcFwdInPfPktsH     Counter32,
    sapEgrEGBaseStQcFwdInPfOcts      Counter64,
    sapEgrEGBaseStQcFwdInPfOctsL     Counter32,
    sapEgrEGBaseStQcFwdInPfOctsH     Counter32,
    sapEgrEGBaseStQcFwdOutPfPkts     Counter64,
    sapEgrEGBaseStQcFwdOutPfPktsL    Counter32,
    sapEgrEGBaseStQcFwdOutPfPktsH    Counter32,
    sapEgrEGBaseStQcFwdOutPfOcts     Counter64,
    sapEgrEGBaseStQcFwdOutPfOctsL    Counter32,
    sapEgrEGBaseStQcFwdOutPfOctsH    Counter32
}

sapEgrEGBaseStLastClearedTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStLastClearedTime indicates the sysUpTime
         when the counters in this table were last cleared."
    ::= { sapEgrEGBaseStEntry 1 }

sapEgrEGBaseStCustId             OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStCustId indicates the Customer ID for the
         associated service."
    ::= { sapEgrEGBaseStEntry 2 }

sapEgrEGBaseStQcDpdInPfPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdInPfPkts indicates the number of
         in-profile packets dropped by the egress Qchip due to: SAP
         state,egress MAC, IP or IPv6 filter, same segment discard,bad
         checksum, etc."
    ::= { sapEgrEGBaseStEntry 3 }

sapEgrEGBaseStQcDpdInPfPktsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdInPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcDpdInPfPkts."
    ::= { sapEgrEGBaseStEntry 4 }

sapEgrEGBaseStQcDpdInPfPktsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdInPfPktsH indicates the higher 32 bits
         of the value of sapEgrEGBaseStQcDpdInPfPkts."
    ::= { sapEgrEGBaseStEntry 5 }

sapEgrEGBaseStQcDpdInPfOcts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdInPfOcts indicates the number of
         in-profile octets dropped by the egress Qchip due to: SAP state,
         egress MAC, IP or IPv6 filter, same segment discard, bad checksum,
         etc."
    ::= { sapEgrEGBaseStEntry 6 }

sapEgrEGBaseStQcDpdInPfOctsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdInPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcDpdInPfOcts."
    ::= { sapEgrEGBaseStEntry 7 }

sapEgrEGBaseStQcDpdInPfOctsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdInPfOctsH indicates the higher 32 bits
         of the value of sapEgrEGBaseStQcDpdInPfOcts."
    ::= { sapEgrEGBaseStEntry 8 }

sapEgrEGBaseStQcDpdOutPfPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdOutPfPkts indicates the number of
         out-of-profile packets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGBaseStEntry 9 }

sapEgrEGBaseStQcDpdOutPfPktsL    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdOutPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcDpdOutPfPkts."
    ::= { sapEgrEGBaseStEntry 10 }

sapEgrEGBaseStQcDpdOutPfPktsH    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdOutPfPktsH indicates the higher 32
         bits of the value of sapEgrEGBaseStQcDpdOutPfPkts."
    ::= { sapEgrEGBaseStEntry 11 }

sapEgrEGBaseStQcDpdOutPfOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdOutPfOcts indicates the number of
         out-of-profile octets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGBaseStEntry 12 }

sapEgrEGBaseStQcDpdOutPfOctsL    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdOutPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcDpdOutPfOcts."
    ::= { sapEgrEGBaseStEntry 13 }

sapEgrEGBaseStQcDpdOutPfOctsH    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcDpdOutPfOctsH indicates the higher 32
         bits of the value of sapEgrEGBaseStQcDpdOutPfOcts."
    ::= { sapEgrEGBaseStEntry 14 }

sapEgrEGBaseStQcFwdInPfPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdInPfPkts indicates the number of
         in-profile packets (rate below CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGBaseStEntry 15 }

sapEgrEGBaseStQcFwdInPfPktsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdInPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcFwdInPfPkts."
    ::= { sapEgrEGBaseStEntry 16 }

sapEgrEGBaseStQcFwdInPfPktsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdInPfPktsH indicates the higher 32 bits
         of the value of sapEgrEGBaseStQcFwdInPfPkts."
    ::= { sapEgrEGBaseStEntry 17 }

sapEgrEGBaseStQcFwdInPfOcts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdInPfOcts indicates the number of
         in-profile octets (rate below CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGBaseStEntry 18 }

sapEgrEGBaseStQcFwdInPfOctsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdInPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcFwdInPfOcts."
    ::= { sapEgrEGBaseStEntry 19 }

sapEgrEGBaseStQcFwdInPfOctsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdInPfOctsH indicates the higher 32 bits
         of the value of sapEgrEGBaseStQcFwdInPfOcts."
    ::= { sapEgrEGBaseStEntry 20 }

sapEgrEGBaseStQcFwdOutPfPkts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdOutPfPkts indicates the number of
         out-of-profile packets (rate above CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGBaseStEntry 21 }

sapEgrEGBaseStQcFwdOutPfPktsL    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdOutPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcFwdOutPfPkts."
    ::= { sapEgrEGBaseStEntry 22 }

sapEgrEGBaseStQcFwdOutPfPktsH    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdOutPfPktsH indicates the higher 32
         bits of the value of sapEgrEGBaseStQcFwdOutPfPkts."
    ::= { sapEgrEGBaseStEntry 23 }

sapEgrEGBaseStQcFwdOutPfOcts     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdOutPfOcts indicates the number of
         out-of-profile octets (rate above CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGBaseStEntry 24 }

sapEgrEGBaseStQcFwdOutPfOctsL    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdOutPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGBaseStQcFwdOutPfOcts."
    ::= { sapEgrEGBaseStEntry 25 }

sapEgrEGBaseStQcFwdOutPfOctsH    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGBaseStQcFwdOutPfOctsH indicates the higher 32
         bits of the value of sapEgrEGBaseStQcFwdOutPfOcts."
    ::= { sapEgrEGBaseStEntry 26 }

sapEgrEGMbrBaseStTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEGMbrBaseStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGMbrBaseStTable that contains basic Encap Group statistics
         per member. This statistics table is valid for Encap Groups created by
         enabling sapEgrEncapGroupQosPerMember. In the descriptions below
         'Qchip' refers to the Nokia SROS series QoS Queueing Engine chip."
    ::= { tmnxSapObjs 130 }

sapEgrEGMbrBaseStEntry           OBJECT-TYPE
    SYNTAX      SapEgrEGMbrBaseStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific Encap Group member of a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEncapGrpMember
    }
    ::= { sapEgrEGMbrBaseStTable 1 }

SapEgrEGMbrBaseStEntry           ::= SEQUENCE
{
    sapEgrEGMbrBaseStLstClearedTime  TimeStamp,
    sapEgrEGMbrBaseStCustId          TmnxCustId,
    sapEgrEGMbrBaseStQcDpdInPfPkts   Counter64,
    sapEgrEGMbrBaseStQcDpdInPfPktsL  Counter32,
    sapEgrEGMbrBaseStQcDpdInPfPktsH  Counter32,
    sapEgrEGMbrBaseStQcDpdInPfOcts   Counter64,
    sapEgrEGMbrBaseStQcDpdInPfOctsL  Counter32,
    sapEgrEGMbrBaseStQcDpdInPfOctsH  Counter32,
    sapEgrEGMbrBaseStQcDpdOutPfPkts  Counter64,
    sapEgrEGMbrBaseStQcDpdOutPfPktsL Counter32,
    sapEgrEGMbrBaseStQcDpdOutPfPktsH Counter32,
    sapEgrEGMbrBaseStQcDpdOutPfOcts  Counter64,
    sapEgrEGMbrBaseStQcDpdOutPfOctsL Counter32,
    sapEgrEGMbrBaseStQcDpdOutPfOctsH Counter32,
    sapEgrEGMbrBaseStQcFwdInPfPkts   Counter64,
    sapEgrEGMbrBaseStQcFwdInPfPktsL  Counter32,
    sapEgrEGMbrBaseStQcFwdInPfPktsH  Counter32,
    sapEgrEGMbrBaseStQcFwdInPfOcts   Counter64,
    sapEgrEGMbrBaseStQcFwdInPfOctsL  Counter32,
    sapEgrEGMbrBaseStQcFwdInPfOctsH  Counter32,
    sapEgrEGMbrBaseStQcFwdOutPfPkts  Counter64,
    sapEgrEGMbrBaseStQcFwdOutPfPktsL Counter32,
    sapEgrEGMbrBaseStQcFwdOutPfPktsH Counter32,
    sapEgrEGMbrBaseStQcFwdOutPfOcts  Counter64,
    sapEgrEGMbrBaseStQcFwdOutPfOctsL Counter32,
    sapEgrEGMbrBaseStQcFwdOutPfOctsH Counter32
}

sapEgrEGMbrBaseStLstClearedTime  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStLstClearedTime indicates the sysUpTime
         when the counters in this table were last cleared."
    ::= { sapEgrEGMbrBaseStEntry 1 }

sapEgrEGMbrBaseStCustId          OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStCustId indicates the Customer ID for the
         associated service."
    ::= { sapEgrEGMbrBaseStEntry 2 }

sapEgrEGMbrBaseStQcDpdInPfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdInPfPkts indicates the number of
         in-profile packets dropped by the egress Qchip due to: SAP state,
         egress MAC, IP or IPv6 filter, same segment discard, bad checksum,
         etc."
    ::= { sapEgrEGMbrBaseStEntry 3 }

sapEgrEGMbrBaseStQcDpdInPfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdInPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 4 }

sapEgrEGMbrBaseStQcDpdInPfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdInPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 5 }

sapEgrEGMbrBaseStQcDpdInPfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdInPfOcts indicates the number of
         in-profile octets dropped by the egress Qchip due to: SAP state,
         egress MAC, IP or IPv6 filter, same segment discard, bad checksum,
         etc."
    ::= { sapEgrEGMbrBaseStEntry 6 }

sapEgrEGMbrBaseStQcDpdInPfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdInPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 7 }

sapEgrEGMbrBaseStQcDpdInPfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdInPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 8 }

sapEgrEGMbrBaseStQcDpdOutPfPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdOutPfPkts indicates the number of
         out-of-profile packets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGMbrBaseStEntry 9 }

sapEgrEGMbrBaseStQcDpdOutPfPktsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdOutPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 10 }

sapEgrEGMbrBaseStQcDpdOutPfPktsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdOutPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 11 }

sapEgrEGMbrBaseStQcDpdOutPfOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdOutPfOcts indicates the number of
         out-of-profile octets discarded by the egress Qchip due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGMbrBaseStEntry 12 }

sapEgrEGMbrBaseStQcDpdOutPfOctsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdOutPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 13 }

sapEgrEGMbrBaseStQcDpdOutPfOctsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcDpdOutPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 14 }

sapEgrEGMbrBaseStQcFwdInPfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdInPfPkts indicates the number of
         in-profile packets (rate below CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGMbrBaseStEntry 15 }

sapEgrEGMbrBaseStQcFwdInPfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdInPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 16 }

sapEgrEGMbrBaseStQcFwdInPfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdInPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 17 }

sapEgrEGMbrBaseStQcFwdInPfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdInPfOcts indicates the number of
         in-profile octets (rate below CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGMbrBaseStEntry 18 }

sapEgrEGMbrBaseStQcFwdInPfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdInPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 19 }

sapEgrEGMbrBaseStQcFwdInPfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdInPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 20 }

sapEgrEGMbrBaseStQcFwdOutPfPkts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdOutPfPkts indicates the number of
         out-of-profile packets (rate above CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGMbrBaseStEntry 21 }

sapEgrEGMbrBaseStQcFwdOutPfPktsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdOutPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 22 }

sapEgrEGMbrBaseStQcFwdOutPfPktsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdOutPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts."
    ::= { sapEgrEGMbrBaseStEntry 23 }

sapEgrEGMbrBaseStQcFwdOutPfOcts  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdOutPfOcts indicates the number of
         out-of-profile octets (rate above CIR) forwarded by the egress Qchip."
    ::= { sapEgrEGMbrBaseStEntry 24 }

sapEgrEGMbrBaseStQcFwdOutPfOctsL OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdOutPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 25 }

sapEgrEGMbrBaseStQcFwdOutPfOctsH OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrBaseStQcFwdOutPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts."
    ::= { sapEgrEGMbrBaseStEntry 26 }

sapEgrEGQueueStTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEGQueueStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGQueueStTable contains egress Encap Group queue statistics
         at the Group level. This statistics table is valid for Encap Groups
         created without enabling sapEgrEncapGroupQosPerMember."
    ::= { tmnxSapObjs 131 }

sapEgrEGQueueStEntry             OBJECT-TYPE
    SYNTAX      SapEgrEGQueueStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress QoS queue statistics about a specific Encap group of a SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEGQueueId
    }
    ::= { sapEgrEGQueueStTable 1 }

SapEgrEGQueueStEntry             ::= SEQUENCE
{
    sapEgrEGQueueId                  TSapEgrQueueId,
    sapEgrEGCustId                   TmnxCustId,
    sapEgrEGQueueStFwdInPfPkts       Counter64,
    sapEgrEGQueueStFwdInPfPktsL      Counter32,
    sapEgrEGQueueStFwdInPfPktsH      Counter32,
    sapEgrEGQueueStDpdInPfPkts       Counter64,
    sapEgrEGQueueStDpdInPfPktsL      Counter32,
    sapEgrEGQueueStDpdInPfPktsH      Counter32,
    sapEgrEGQueueStFwdOutPfPkts      Counter64,
    sapEgrEGQueueStFwdOutPfPktsL     Counter32,
    sapEgrEGQueueStFwdOutPfPktsH     Counter32,
    sapEgrEGQueueStDpdOutPfPkts      Counter64,
    sapEgrEGQueueStDpdOutPfPktsL     Counter32,
    sapEgrEGQueueStDpdOutPfPktsH     Counter32,
    sapEgrEGQueueStFwdInPfOcts       Counter64,
    sapEgrEGQueueStFwdInPfOctsL      Counter32,
    sapEgrEGQueueStFwdInPfOctsH      Counter32,
    sapEgrEGQueueStDpdInPfOcts       Counter64,
    sapEgrEGQueueStDpdInPfOctsL      Counter32,
    sapEgrEGQueueStDpdInPfOctsH      Counter32,
    sapEgrEGQueueStFwdOutPfOcts      Counter64,
    sapEgrEGQueueStFwdOutPfOctsL     Counter32,
    sapEgrEGQueueStFwdOutPfOctsH     Counter32,
    sapEgrEGQueueStDpdOutPfOcts      Counter64,
    sapEgrEGQueueStDpdOutPfOctsL     Counter32,
    sapEgrEGQueueStDpdOutPfOctsH     Counter32
}

sapEgrEGQueueId                  OBJECT-TYPE
    SYNTAX      TSapEgrQueueId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueId indicates the index of the egress QoS
         queue of this SAP."
    ::= { sapEgrEGQueueStEntry 1 }

sapEgrEGCustId                   OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGCustId indicates the Customer ID for the
         associated service."
    ::= { sapEgrEGQueueStEntry 2 }

sapEgrEGQueueStFwdInPfPkts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdInPfPkts indicates the number of
         in-profile packets (rate below CIR) forwarded by the egress queue."
    ::= { sapEgrEGQueueStEntry 3 }

sapEgrEGQueueStFwdInPfPktsL      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdInPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStFwdInPfPkts."
    ::= { sapEgrEGQueueStEntry 4 }

sapEgrEGQueueStFwdInPfPktsH      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdInPfPktsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStFwdInPfPkts."
    ::= { sapEgrEGQueueStEntry 5 }

sapEgrEGQueueStDpdInPfPkts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdInPfPkts indicates the number of
         in-profile packets discarded by the egress Queue due to: MBS exceeded,
         buffer pool limit exceeded etc."
    ::= { sapEgrEGQueueStEntry 6 }

sapEgrEGQueueStDpdInPfPktsL      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdInPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStDpdInPfPkts."
    ::= { sapEgrEGQueueStEntry 7 }

sapEgrEGQueueStDpdInPfPktsH      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdInPfPktsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStDpdInPfPkts."
    ::= { sapEgrEGQueueStEntry 8 }

sapEgrEGQueueStFwdOutPfPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdOutPfPkts indicates the number of
         out-of-profile packets (rate above CIR) forwarded by the egress queue."
    ::= { sapEgrEGQueueStEntry 9 }

sapEgrEGQueueStFwdOutPfPktsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdOutPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStFwdOutPfPkts."
    ::= { sapEgrEGQueueStEntry 10 }

sapEgrEGQueueStFwdOutPfPktsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdOutPfPktsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStFwdOutPfPkts."
    ::= { sapEgrEGQueueStEntry 11 }

sapEgrEGQueueStDpdOutPfPkts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdOutPfPkts indicates the number of
         out-of-profile packets discarded by the egress queue due to: MBS
         exceeded, buffer pool limit exceeded etc."
    ::= { sapEgrEGQueueStEntry 12 }

sapEgrEGQueueStDpdOutPfPktsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdOutPfPktsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStDpdOutPfPkts."
    ::= { sapEgrEGQueueStEntry 13 }

sapEgrEGQueueStDpdOutPfPktsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdOutPfPktsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStDpdOutPfPkts."
    ::= { sapEgrEGQueueStEntry 14 }

sapEgrEGQueueStFwdInPfOcts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdInPfOcts indicates the number of
         in-profile octets (rate below CIR) forwarded by the egress queue."
    ::= { sapEgrEGQueueStEntry 15 }

sapEgrEGQueueStFwdInPfOctsL      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdInPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStFwdInPfOcts."
    ::= { sapEgrEGQueueStEntry 16 }

sapEgrEGQueueStFwdInPfOctsH      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdInPfOctsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStFwdInPfOcts."
    ::= { sapEgrEGQueueStEntry 17 }

sapEgrEGQueueStDpdInPfOcts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdInPfOcts indicates the number of
         in-profile octets discarded by the egress queue due to: MBS exceeded,
         buffer pool limit exceeded etc."
    ::= { sapEgrEGQueueStEntry 18 }

sapEgrEGQueueStDpdInPfOctsL      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdInPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStDpdInPfOcts."
    ::= { sapEgrEGQueueStEntry 19 }

sapEgrEGQueueStDpdInPfOctsH      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdInPfOctsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStDpdInPfOcts."
    ::= { sapEgrEGQueueStEntry 20 }

sapEgrEGQueueStFwdOutPfOcts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdOutPfOcts indicates the number of
         out-of-profile octets (rate above CIR) forwarded by the egress queue."
    ::= { sapEgrEGQueueStEntry 21 }

sapEgrEGQueueStFwdOutPfOctsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdOutPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStFwdOutPfOcts."
    ::= { sapEgrEGQueueStEntry 22 }

sapEgrEGQueueStFwdOutPfOctsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStFwdOutPfOctsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStFwdOutPfOcts."
    ::= { sapEgrEGQueueStEntry 23 }

sapEgrEGQueueStDpdOutPfOcts      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdOutPfOcts indicates the number of
         out-of-profile octets discarded by the egress queue due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGQueueStEntry 24 }

sapEgrEGQueueStDpdOutPfOctsL     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdOutPfOctsL indicates the lower 32 bits
         of the value of sapEgrEGQueueStDpdOutPfOcts."
    ::= { sapEgrEGQueueStEntry 25 }

sapEgrEGQueueStDpdOutPfOctsH     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGQueueStDpdOutPfOctsH indicates the higher 32 bits
         of the value of sapEgrEGQueueStDpdOutPfOcts."
    ::= { sapEgrEGQueueStEntry 26 }

sapEgrEGMbrQueueStTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEGMbrQueueStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGMbrQueueStTable contains egress Encap Group member queue
         statistics per member. This statistics table is valid for Encap Groups
         created by enabling sapEgrEncapGroupQosPerMember."
    ::= { tmnxSapObjs 132 }

sapEgrEGMbrQueueStEntry          OBJECT-TYPE
    SYNTAX      SapEgrEGMbrQueueStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress QoS queue statistics about a specific Encap group member of a
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEncapGrpMember,
        sapEgrEGMbrQueueId
    }
    ::= { sapEgrEGMbrQueueStTable 1 }

SapEgrEGMbrQueueStEntry          ::= SEQUENCE
{
    sapEgrEGMbrQueueId               TSapEgrQueueId,
    sapEgrEGMbrQueueCustId           TmnxCustId,
    sapEgrEGMbrQueueStFwdInPfPkts    Counter64,
    sapEgrEGMbrQueueStFwdInPfPktsL   Counter32,
    sapEgrEGMbrQueueStFwdInPfPktsH   Counter32,
    sapEgrEGMbrQueueStDpdInPfPkts    Counter64,
    sapEgrEGMbrQueueStDpdInPfPktsL   Counter32,
    sapEgrEGMbrQueueStDpdInPfPktsH   Counter32,
    sapEgrEGMbrQueueStFwdOutPfPkts   Counter64,
    sapEgrEGMbrQueueStFwdOutPfPktsL  Counter32,
    sapEgrEGMbrQueueStFwdOutPfPktsH  Counter32,
    sapEgrEGMbrQueueStDpdOutPfPkts   Counter64,
    sapEgrEGMbrQueueStDpdOutPfPktsL  Counter32,
    sapEgrEGMbrQueueStDpdOutPfPktsH  Counter32,
    sapEgrEGMbrQueueStFwdInPfOcts    Counter64,
    sapEgrEGMbrQueueStFwdInPfOctsL   Counter32,
    sapEgrEGMbrQueueStFwdInPfOctsH   Counter32,
    sapEgrEGMbrQueueStDpdInPfOcts    Counter64,
    sapEgrEGMbrQueueStDpdInPfOctsL   Counter32,
    sapEgrEGMbrQueueStDpdInPfOctsH   Counter32,
    sapEgrEGMbrQueueStFwdOutPfOcts   Counter64,
    sapEgrEGMbrQueueStFwdOutPfOctsL  Counter32,
    sapEgrEGMbrQueueStFwdOutPfOctsH  Counter32,
    sapEgrEGMbrQueueStDpdOutPfOcts   Counter64,
    sapEgrEGMbrQueueStDpdOutPfOctsL  Counter32,
    sapEgrEGMbrQueueStDpdOutPfOctsH  Counter32
}

sapEgrEGMbrQueueId               OBJECT-TYPE
    SYNTAX      TSapEgrQueueId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueId indicates the index of the egress QoS
         queue of this SAP."
    ::= { sapEgrEGMbrQueueStEntry 1 }

sapEgrEGMbrQueueCustId           OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueCustId indicates the Customer ID for the
         associated service."
    ::= { sapEgrEGMbrQueueStEntry 2 }

sapEgrEGMbrQueueStFwdInPfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdInPfPkts indicates the number of
         in-profile packets (rate below CIR) forwarded by the egress queue."
    ::= { sapEgrEGMbrQueueStEntry 3 }

sapEgrEGMbrQueueStFwdInPfPktsL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdInPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStFwdInPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 4 }

sapEgrEGMbrQueueStFwdInPfPktsH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdInPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStFwdInPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 5 }

sapEgrEGMbrQueueStDpdInPfPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdInPfPkts indicates the number of
         in-profile packets discarded by the egress queue due to: MBS exceeded,
         buffer pool limit exceeded, etc."
    ::= { sapEgrEGMbrQueueStEntry 6 }

sapEgrEGMbrQueueStDpdInPfPktsL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdInPfPktsL indicates the lower 32 bits
         of the value of  sapEgrEGMbrQueueStDpdInPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 7 }

sapEgrEGMbrQueueStDpdInPfPktsH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdInPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStDpdInPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 8 }

sapEgrEGMbrQueueStFwdOutPfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdOutPfPkts indicates the number of
         out-of-profile packets (rate above CIR) forwarded by the egress queue."
    ::= { sapEgrEGMbrQueueStEntry 9 }

sapEgrEGMbrQueueStFwdOutPfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdOutPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 10 }

sapEgrEGMbrQueueStFwdOutPfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdOutPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 11 }

sapEgrEGMbrQueueStDpdOutPfPkts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdOutPfPkts indicates the number of
         out-of-profile packets discarded by the egress queue due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGMbrQueueStEntry 12 }

sapEgrEGMbrQueueStDpdOutPfPktsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdOutPfPktsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 13 }

sapEgrEGMbrQueueStDpdOutPfPktsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdOutPfPktsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts."
    ::= { sapEgrEGMbrQueueStEntry 14 }

sapEgrEGMbrQueueStFwdInPfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdInPfOcts indicates the number of
         in-profile octets (rate below CIR) forwarded by the egress queue."
    ::= { sapEgrEGMbrQueueStEntry 15 }

sapEgrEGMbrQueueStFwdInPfOctsL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdInPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStFwdInPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 16 }

sapEgrEGMbrQueueStFwdInPfOctsH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdInPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStFwdInPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 17 }

sapEgrEGMbrQueueStDpdInPfOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdInPfOcts indicates the number of
         in-profile octets discarded by the egress queue due to: MBS exceeded,
         buffer pool limit exceeded, etc."
    ::= { sapEgrEGMbrQueueStEntry 18 }

sapEgrEGMbrQueueStDpdInPfOctsL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdInPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStDpdInPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 19 }

sapEgrEGMbrQueueStDpdInPfOctsH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdInPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStDpdInPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 20 }

sapEgrEGMbrQueueStFwdOutPfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdOutPfOcts indicates the number of
         out-of-profile octets (rate above CIR) forwarded by the egress queue."
    ::= { sapEgrEGMbrQueueStEntry 21 }

sapEgrEGMbrQueueStFwdOutPfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdOutPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 22 }

sapEgrEGMbrQueueStFwdOutPfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStFwdOutPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 23 }

sapEgrEGMbrQueueStDpdOutPfOcts   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdOutPfOcts indicates the number of
         out-of-profile octets discarded by the egress queue due to: MBS
         exceeded, buffer pool limit exceeded, etc."
    ::= { sapEgrEGMbrQueueStEntry 24 }

sapEgrEGMbrQueueStDpdOutPfOctsL  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdOutPfOctsL indicates the lower 32
         bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 25 }

sapEgrEGMbrQueueStDpdOutPfOctsH  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrQueueStDpdOutPfOctsH indicates the higher 32
         bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts."
    ::= { sapEgrEGMbrQueueStEntry 26 }

sapEgrEGSchedStTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEGSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGSchedStTable contains egress encapsulation group QoS
         scheduler SAP at the Group level. This statistics table is valid for
         Encap Groups created without enabling sapEgrEncapGroupQosPerMember."
    ::= { tmnxSapObjs 133 }

sapEgrEGSchedStEntry             OBJECT-TYPE
    SYNTAX      SapEgrEGSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific QoS scheduler instantiated per
         encapsulation group of SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEGSchedStName
    }
    ::= { sapEgrEGSchedStTable 1 }

SapEgrEGSchedStEntry             ::= SEQUENCE
{
    sapEgrEGSchedStName              TNamedItem,
    sapEgrEGSchedCustId              TmnxCustId,
    sapEgrEGSchedStFwdPkts           Counter64,
    sapEgrEGSchedStFwdPktsL          Counter32,
    sapEgrEGSchedStFwdPktsH          Counter32,
    sapEgrEGSchedStFwdOcts           Counter64,
    sapEgrEGSchedStFwdOctsL          Counter32,
    sapEgrEGSchedStFwdOctsH          Counter32
}

sapEgrEGSchedStName              OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGSchedStName specifies the name of the egress QoS scheduler
         of this SAP."
    ::= { sapEgrEGSchedStEntry 1 }

sapEgrEGSchedCustId              OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedCustId indicates the Customer ID for the
         associated service."
    ::= { sapEgrEGSchedStEntry 2 }

sapEgrEGSchedStFwdPkts           OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedStFwdPkts indicates thee number of packets
         forwarded by the egress QoS scheduler of this SAP."
    ::= { sapEgrEGSchedStEntry 3 }

sapEgrEGSchedStFwdPktsL          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedStFwdPktsL indicates the lower 32 bits of
         the value of sapEgrEGSchedStFwdPkts."
    ::= { sapEgrEGSchedStEntry 4 }

sapEgrEGSchedStFwdPktsH          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedStFwdPktsH indicates the higher 32 bits of
         the value of sapEgrEGSchedStFwdPkts."
    ::= { sapEgrEGSchedStEntry 5 }

sapEgrEGSchedStFwdOcts           OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedStFwdOcts indicates the number of octets
         forwarded by the egress QoS scheduler of this SAP."
    ::= { sapEgrEGSchedStEntry 6 }

sapEgrEGSchedStFwdOctsL          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedStFwdOctsL indicates the lower 32 bits of
         the value of sapEgrEGSchedStFwdOcts."
    ::= { sapEgrEGSchedStEntry 7 }

sapEgrEGSchedStFwdOctsH          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGSchedStFwdOctsH indicates the higher 32 bits of
         the value of sapEgrEGSchedStFwdOcts."
    ::= { sapEgrEGSchedStEntry 8 }

sapEgrEGMbrSchedStTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrEGMbrSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGMbrSchedStTable contains egress encapsulation group QoS
         scheduler SAP per member. This statistics table is valid for Encap
         Groups created by enabling sapEgrEncapGroupQosPerMember."
    ::= { tmnxSapObjs 134 }

sapEgrEGMbrSchedStEntry          OBJECT-TYPE
    SYNTAX      SapEgrEGMbrSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific QoS scheduler instantiated per
         encapsulation group member of SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEncapGrpMember,
        sapEgrEGMbrSchedStName
    }
    ::= { sapEgrEGMbrSchedStTable 1 }

SapEgrEGMbrSchedStEntry          ::= SEQUENCE
{
    sapEgrEGMbrSchedStName           TNamedItem,
    sapEgrEGMbrSchedCustId           TmnxCustId,
    sapEgrEGMbrSchedStFwdPkts        Counter64,
    sapEgrEGMbrSchedStFwdPktsL       Counter32,
    sapEgrEGMbrSchedStFwdPktsH       Counter32,
    sapEgrEGMbrSchedStFwdOcts        Counter64,
    sapEgrEGMbrSchedStFwdOctsL       Counter32,
    sapEgrEGMbrSchedStFwdOctsH       Counter32
}

sapEgrEGMbrSchedStName           OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrEGMbrSchedStName specifies the name of the egress QoS
         scheduler of this SAP."
    ::= { sapEgrEGMbrSchedStEntry 1 }

sapEgrEGMbrSchedCustId           OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedCustId indicates the Customer ID for the
         associated service."
    ::= { sapEgrEGMbrSchedStEntry 2 }

sapEgrEGMbrSchedStFwdPkts        OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedStFwdPkts indicates the number of packets
         forwarded by the egress QoS scheduler of this SAP."
    ::= { sapEgrEGMbrSchedStEntry 3 }

sapEgrEGMbrSchedStFwdPktsL       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedStFwdPktsL indicates the lower 32 bits of
         the value of sapEgrEGMbrSchedStFwdPkts."
    ::= { sapEgrEGMbrSchedStEntry 4 }

sapEgrEGMbrSchedStFwdPktsH       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedStFwdPktsH indicates the higher 32 bits
         of the value of sapEgrEGMbrSchedStFwdPkts."
    ::= { sapEgrEGMbrSchedStEntry 5 }

sapEgrEGMbrSchedStFwdOcts        OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedStFwdOcts indicates the number of octets
         forwarded by the egress QoS scheduler of this SAP."
    ::= { sapEgrEGMbrSchedStEntry 6 }

sapEgrEGMbrSchedStFwdOctsL       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedStFwdOctsL indicates the lower 32 bits of
         the value of sapEgrEGMbrSchedStFwdOcts."
    ::= { sapEgrEGMbrSchedStEntry 7 }

sapEgrEGMbrSchedStFwdOctsH       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrEGMbrSchedStFwdOctsH indicates the higher 32 bits
         of the value of sapEgrEGMbrSchedStFwdOcts."
    ::= { sapEgrEGMbrSchedStEntry 8 }

sapPortIdEgrEGSchedStTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPortIdEgrEGSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdEgrEGSchedStTable contains egress QoS scheduler SAP
         statistics per port at the Group level. This statistics table is valid
         for Encap Groups created without enabling
         sapEgrEncapGroupQosPerMember. This table is used when the encap
         group's SAP is a CCAG or LAG in 'link' mode or an APS."
    ::= { tmnxSapObjs 135 }

sapPortIdEgrEGSchedStEntry       OBJECT-TYPE
    SYNTAX      SapPortIdEgrEGSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific Encap Group's QoS scheduler port of
         a SAP. Entries are created when a scheduler policy is applied to an
         Encap Group."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapPortIdEgrEGSchedStName,
        sapPortIdEgrPortId
    }
    ::= { sapPortIdEgrEGSchedStTable 1 }

SapPortIdEgrEGSchedStEntry       ::= SEQUENCE
{
    sapPortIdEgrEGSchedStName        TNamedItem,
    sapPortIdEgrEGSchedCustId        TmnxCustId,
    sapPortIdEgrEGSchedFwdPkts       Counter64,
    sapPortIdEgrEGSchedFwdPktsL      Counter32,
    sapPortIdEgrEGSchedFwdPktsH      Counter32,
    sapPortIdEgrEGSchedFwdOcts       Counter64,
    sapPortIdEgrEGSchedFwdOctsL      Counter32,
    sapPortIdEgrEGSchedFwdOctsH      Counter32
}

sapPortIdEgrEGSchedStName        OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdEgrEGSchedStName specifies the name of the egress
         encapsulation group port scheduler of this SAP."
    ::= { sapPortIdEgrEGSchedStEntry 1 }

sapPortIdEgrEGSchedCustId        OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGSchedCustId indicates the Customer ID for
         the associated service."
    ::= { sapPortIdEgrEGSchedStEntry 2 }

sapPortIdEgrEGSchedFwdPkts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGSchedFwdPkts indicates the number of
         packets forwarded by the egress port scheduler of this SAP."
    ::= { sapPortIdEgrEGSchedStEntry 3 }

sapPortIdEgrEGSchedFwdPktsL      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGSchedFwdPktsL indicates the lower 32 bits
         of the value of sapPortIdEgrEGSchedFwdPkts."
    ::= { sapPortIdEgrEGSchedStEntry 4 }

sapPortIdEgrEGSchedFwdPktsH      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapPortIdEgrEGSchedFwdPktsH indicates the higher 32 bits of
         the value of sapPortIdEgrEGSchedFwdPkts."
    ::= { sapPortIdEgrEGSchedStEntry 5 }

sapPortIdEgrEGSchedFwdOcts       OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapPortIdEgrEGSchedFwdOcts indicates the number of octets
         forwarded by the egress port scheduler of this SAP."
    ::= { sapPortIdEgrEGSchedStEntry 6 }

sapPortIdEgrEGSchedFwdOctsL      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGSchedFwdOctsL indicates the lower 32 bits
         of the value of sapPortIdEgrEGSchedFwdOcts."
    ::= { sapPortIdEgrEGSchedStEntry 7 }

sapPortIdEgrEGSchedFwdOctsH      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapPortIdEgrEGSchedFwdOctsH indicates the higher 32 bits of
         the value of sapPortIdEgrEGSchedFwdOcts."
    ::= { sapPortIdEgrEGSchedStEntry 8 }

sapPortIdEgrEGMbrSchedStTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapPortIdEgrEGMbrSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdEgrEGMbrSchedStTable contains egress QoS scheduler SAP
         statistics per port. This statistics table is valid for Encap Groups
         created by enabling sapEgrEncapGroupQosPerMember. This table fetches
         statistics  per member. This table is used when the Encap Group's SAP
         is a CCAG or LAG in 'link' mode or an APS."
    ::= { tmnxSapObjs 136 }

sapPortIdEgrEGMbrSchedStEntry    OBJECT-TYPE
    SYNTAX      SapPortIdEgrEGMbrSchedStEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Egress statistics about a specific Encap Group member QoS scheduler
         port of a SAP. Entries are created when a scheduler policy is applied
         to an Encap Group."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrEncapGroupName,
        sapEgrEncapGrpMember,
        sapPortIdEgrEGMbrSchedStName,
        sapPortIdEgrPortId
    }
    ::= { sapPortIdEgrEGMbrSchedStTable 1 }

SapPortIdEgrEGMbrSchedStEntry    ::= SEQUENCE
{
    sapPortIdEgrEGMbrSchedStName     TNamedItem,
    sapPortIdEgrEGMbrSchedCustId     TmnxCustId,
    sapPortIdEgrEGMbrSchedFwdPkts    Counter64,
    sapPortIdEgrEGMbrSchedFwdPktsL   Counter32,
    sapPortIdEgrEGMbrSchedFwdPktsH   Counter32,
    sapPortIdEgrEGMbrSchedFwdOcts    Counter64,
    sapPortIdEgrEGMbrSchedFwdOctsL   Counter32,
    sapPortIdEgrEGMbrSchedFwdOctsH   Counter32
}

sapPortIdEgrEGMbrSchedStName     OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapPortIdEgrEGMbrSchedStName specifies the name of the egress
         encapsulation group QOS port scheduler of this SAP."
    ::= { sapPortIdEgrEGMbrSchedStEntry 1 }

sapPortIdEgrEGMbrSchedCustId     OBJECT-TYPE
    SYNTAX      TmnxCustId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGMbrSchedCustId indicates the Customer ID
         for the associated service."
    ::= { sapPortIdEgrEGMbrSchedStEntry 2 }

sapPortIdEgrEGMbrSchedFwdPkts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGMbrSchedFwdPkts indicates the number of
         packets forwarded by the egress port scheduler of this SAP."
    ::= { sapPortIdEgrEGMbrSchedStEntry 3 }

sapPortIdEgrEGMbrSchedFwdPktsL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGMbrSchedFwdPktsL indicates the lower 32
         bits of the value of sapPortIdEgrEGMbrSchedFwdPkts."
    ::= { sapPortIdEgrEGMbrSchedStEntry 4 }

sapPortIdEgrEGMbrSchedFwdPktsH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapPortIdEgrEGMbrSchedFwdPktsH indicates the higher 32 bits
         of the value of sapPortIdEgrEGMbrSchedFwdPkts."
    ::= { sapPortIdEgrEGMbrSchedStEntry 5 }

sapPortIdEgrEGMbrSchedFwdOcts    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapPortIdEgrEGMbrSchedFwdOcts indicates the number of octets
         forwarded by the egress port scheduler of this SAP."
    ::= { sapPortIdEgrEGMbrSchedStEntry 6 }

sapPortIdEgrEGMbrSchedFwdOctsL   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapPortIdEgrEGMbrSchedFwdOctsL indicates the lower 32
         bits of the value of sapPortIdEgrEGMbrSchedFwdOcts."
    ::= { sapPortIdEgrEGMbrSchedStEntry 7 }

sapPortIdEgrEGMbrSchedFwdOctsH   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value sapPortIdEgrEGMbrSchedFwdOctsH indicates the higher 32 bits
         of the value of sapPortIdEgrEGMbrSchedFwdOcts."
    ::= { sapPortIdEgrEGMbrSchedStEntry 8 }

sapDefHostTableLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapDefHostTableLastChanged indicates the value
         of sysUpTime at the time of the last modification of an conceptual row
         in the sapDefHostTable."
    ::= { tmnxSapObjs 137 }

sapDefHostTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapDefHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP default host information.

         Entries in this table can be created or deleted via SNMP operations.

         A row in this table can only be created for a SAP in a group
         interface, that is each row in the sapBaseInfoTable where the value of
         sapIesIfIndex corresponds to a row in the vRtrIfTable where the value
         of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'."
    ::= { tmnxSapObjs 138 }

sapDefHostEntry                  OBJECT-TYPE
    SYNTAX      SapDefHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "SAP default host specific information."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapDefHostIpv4SubnetAddr,
        sapDefHostIpv4SubnetMask
    }
    ::= { sapDefHostTable 1 }

SapDefHostEntry                  ::= SEQUENCE
{
    sapDefHostIpv4SubnetAddr         IpAddress,
    sapDefHostIpv4SubnetMask         IpAddress,
    sapDefHostLastChanged            TimeStamp,
    sapDefHostRowStatus              RowStatus,
    sapDefHostNextHopIpv4Addr        IpAddress
}

sapDefHostIpv4SubnetAddr         OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapDefHostIpv4SubnetAddr specifies the IPv4
         subnet address for this SAP default host.

         It must be equal to one of the addresses of the subscriber interface
         this SAP belongs to, that is one of its vRiaIpAddress values."
    DEFVAL      { '00000000'H }
    ::= { sapDefHostEntry 1 }

sapDefHostIpv4SubnetMask         OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostIpv4SubnetMask specifies the subnet mask
         applicable to sapDefHostIpv4SubnetAddr.

         It must be equal to the netmask of the subscriber interface address
         associated with sapDefHostIpv4SubnetAddr, that is the vRiaNetMask of
         the same row in the vRtrIpAddrTable."
    DEFVAL      { '00000000'H }
    ::= { sapDefHostEntry 2 }

sapDefHostLastChanged            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostLastChanged indicates the sysUpTime at the time
         of the most recent management-initiated change to this conceptual row."
    ::= { sapDefHostEntry 3 }

sapDefHostRowStatus              OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostRowStatus specifies the row status of this row."
    ::= { sapDefHostEntry 4 }

sapDefHostNextHopIpv4Addr        OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostNextHopIpv4Addr specifies the next-hop IP
         address for this SAP default host.

         The value all zeroes is not allowed.

         A value for sapDefHostNextHopIpv4Addr must be specified when a row is
         created and this value cannot be changed afterwards."
    ::= { sapDefHostEntry 5 }

sapTlsSpbTblLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsSpbTblLastChanged indicates the sysUpTime at the
         time of the last modification of sapTlsSpbTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 139 }

sapTlsSpbTable                   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsSpbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains TLS SAP specific Shortest Path Bridging (SPB)
         information."
    ::= { tmnxSapObjs 140 }

sapTlsSpbEntry                   OBJECT-TYPE
    SYNTAX      SapTlsSpbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row entry that contains TLS SAP specific SPB information."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapTlsSpbTable 1 }

SapTlsSpbEntry                   ::= SEQUENCE
{
    sapTlsSpbRowStatus               RowStatus,
    sapTlsSpbLastChgd                TimeStamp,
    sapTlsSpbIfIndex                 InterfaceIndexOrZero,
    sapTlsSpbAdminState              TmnxAdminState
}

sapTlsSpbRowStatus               OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This value of the object sapTlsSpbRowStatus specifies the status of
         this row."
    ::= { sapTlsSpbEntry 1 }

sapTlsSpbLastChgd                OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsSpbLastChgd indicates the timestamp of last change
         to this row in sapTlsSpbTable."
    ::= { sapTlsSpbEntry 2 }

sapTlsSpbIfIndex                 OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsSpbIfIndex indicates the interface index assigned
         to this SAP for Shortest Path Bridging."
    ::= { sapTlsSpbEntry 3 }

sapTlsSpbAdminState              OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapTlsSpbAdminState specifies the desired administrative state for
         Shortest Path Bridging on this sap."
    DEFVAL      { outOfService }
    ::= { sapTlsSpbEntry 4 }

tmnxIpTunnelTableLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelTableLastChanged indicates the sysUpTime at
         the time of the last modification to tmnxIpTunnelTable by adding,
         deleting an entry or change to a writable object in the table.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 141 }

tmnxIpTunnelTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxIpTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxIpTunnelTable contains IP Tunnel entries for each SAP.

         Entries are created/deleted by the user."
    ::= { tmnxSapObjs 142 }

tmnxIpTunnelEntry                OBJECT-TYPE
    SYNTAX      TmnxIpTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxIpTunnelEntry contains information about a single IP Tunnel
         entry."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxIpTunnelName
    }
    ::= { tmnxIpTunnelTable 1 }

TmnxIpTunnelEntry                ::= SEQUENCE
{
    tmnxIpTunnelName                 TNamedItem,
    tmnxIpTunnelRowStatus            RowStatus,
    tmnxIpTunnelLastChanged          TimeStamp,
    tmnxIpTunnelGreHeader            TruthValue,
    tmnxIpTunnelDescription          TItemDescription,
    tmnxIpTunnelLclIpAddrType        InetAddressType,
    tmnxIpTunnelLclIpAddr            InetAddress,
    tmnxIpTunnelRemIpAddrType        InetAddressType,
    tmnxIpTunnelRemIpAddr            InetAddress,
    tmnxIpTunnelBackupRemIpAddrType  InetAddressType,
    tmnxIpTunnelBackupRemIpAddr      InetAddress,
    tmnxIpTunnelOperRemIpAddrType    InetAddressType,
    tmnxIpTunnelOperRemIpAddr        InetAddress,
    tmnxIpTunnelDeliverySvcId        TmnxServId,
    tmnxIpTunnelAdminState           TmnxAdminState,
    tmnxIpTunnelOperState            TmnxIpTunnelOperState,
    tmnxIpTunnelOperFlags            BITS,
    tmnxIpTunnelDscp                 TDSCPNameOrEmpty,
    tmnxIpTunnelReassembly           Integer32,
    tmnxIpTunnelClearDfBit           TruthValue,
    tmnxIpTunnelIpMtu                Unsigned32,
    tmnxIpTunnelHostISA              TmnxHwIndexOrZero,
    tmnxIpTunnelEncapIpMtu           Unsigned32,
    tmnxIpTunnelPropagateIpv6PMTU    TruthValue,
    tmnxIpTunnelIcmp6Pkt2Big         TruthValue,
    tmnxIpTunnelIcmp6NumPkt2Big      Unsigned32,
    tmnxIpTunnelIcmp6Pkt2BigTime     Unsigned32,
    tmnxIpTunnelGreHeaderSendKey     Unsigned32,
    tmnxIpTunnelGreHeaderRcvKey      Unsigned32,
    tmnxIpTunnelGreHeaderKeysSet     TruthValue,
    tmnxIpTunnelOperChanged          TimeStamp,
    tmnxIpTunnelPubTcpMssAdjust      Integer32,
    tmnxIpTunnelPrivTcpMssAdjust     Integer32,
    tmnxIpTunnelDeliverySvcName      TLNamedItemOrEmpty,
    tmnxIpTunnelHostEsa              TmnxEsaIdOrZero,
    tmnxIpTunnelHostEsaVm            TmnxEsaVmIdOrZero,
    tmnxIpTunnelIPsecTransportMdProf TNamedItemOrEmpty,
    tmnxIpTunnelPropagateIpv4PMTU    TruthValue,
    tmnxIpTunnelIcmpFragReq          TruthValue,
    tmnxIpTunnelIcmpFragReqNum       Unsigned32,
    tmnxIpTunnelIcmpFragReqTime      Unsigned32,
    tmnxIpTunnelPMTUDiscoverAging    Unsigned32
}

tmnxIpTunnelName                 OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelName specifies the name of the tunnel and is
         part of the index for the table tmnxIpTunnelTable."
    ::= { tmnxIpTunnelEntry 1 }

tmnxIpTunnelRowStatus            OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The tmnxIpTunnelRowStatus object is used to create and delete rows in
         the tmnxIpTunnelTable."
    ::= { tmnxIpTunnelEntry 2 }

tmnxIpTunnelLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelLastChanged indicates the sysUpTime at the
         time of the last modification of this entry."
    ::= { tmnxIpTunnelEntry 3 }

tmnxIpTunnelGreHeader            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelGreHeader specifies whether the tunnel will
         include a GRE header in it."
    DEFVAL      { false }
    ::= { tmnxIpTunnelEntry 4 }

tmnxIpTunnelDescription          OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelDescription specifies the user-provided
         description for each tmnxIpTunnelEntry in the table tmnxIpTunnelTable."
    DEFVAL      { "" }
    ::= { tmnxIpTunnelEntry 5 }

tmnxIpTunnelLclIpAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelLclIpAddrType specifies the address type of
         address in tmnxIpTunnelLclIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxIpTunnelEntry 6 }

tmnxIpTunnelLclIpAddr            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelLclIpAddr specifies the address of the local
         endpoint of this IP tunnel."
    DEFVAL      { ''H }
    ::= { tmnxIpTunnelEntry 7 }

tmnxIpTunnelRemIpAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelRemIpAddrType specifies the address type of
         address in tmnxIpTunnelRemIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxIpTunnelEntry 8 }

tmnxIpTunnelRemIpAddr            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelRemIpAddr specifies the address of the remote
         endpoint of this IP tunnel."
    DEFVAL      { ''H }
    ::= { tmnxIpTunnelEntry 9 }

tmnxIpTunnelBackupRemIpAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBackupRemIpAddrType specifies the address
         type of address in tmnxIpTunnelBackupRemIpAddr."
    DEFVAL      { unknown }
    ::= { tmnxIpTunnelEntry 10 }

tmnxIpTunnelBackupRemIpAddr      OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBackupRemIpAddr specifies the address of the
         backup remote endpoint of this IP tunnel."
    DEFVAL      { ''H }
    ::= { tmnxIpTunnelEntry 11 }

tmnxIpTunnelOperRemIpAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelOperRemIpAddrType indicates the address type
         of address in tmnxIpTunnelOperRemIpAddr."
    ::= { tmnxIpTunnelEntry 12 }

tmnxIpTunnelOperRemIpAddr        OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelOperRemIpAddr indicates the address of the
         operational remote endpoint of this IP tunnel."
    ::= { tmnxIpTunnelEntry 13 }

tmnxIpTunnelDeliverySvcId        OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelDeliverySvcId specifies the ID of the tunnel
         delivery service.

         The value of tmnxIpTunnelDeliverySvcId must be zero when
         tmnxIpTunnelDeliverySvcName is not default and vice-versa."
    DEFVAL      { 0 }
    ::= { tmnxIpTunnelEntry 14 }

tmnxIpTunnelAdminState           OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelAdminState specifies the administrative state
         of the tmnxIpTunnelEntry."
    DEFVAL      { outOfService }
    ::= { tmnxIpTunnelEntry 15 }

tmnxIpTunnelOperState            OBJECT-TYPE
    SYNTAX      TmnxIpTunnelOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelOperState indicates the operational status of
         tmnxIpTunnelEntry."
    ::= { tmnxIpTunnelEntry 16 }

tmnxIpTunnelOperFlags            OBJECT-TYPE
    SYNTAX      BITS {
        unresolvedLocalIp     (0),
        tunnelAdminDown       (1),
        sapDown               (2),
        unresolvedDeliverySvc (3),
        unregisteredLocalIp   (4),
        remIpUnreachable      (5),
        unresolvedDstIp       (6),
        trustAnchorsDown      (7),
        certProfileDown       (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelOperFlags indicates the reason why the tunnel
         is operationally down."
    ::= { tmnxIpTunnelEntry 17 }

tmnxIpTunnelDscp                 OBJECT-TYPE
    SYNTAX      TDSCPNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelDscp specifies DSCP value which will be used
         in the IP tunnel carrying IP header in the delivery service."
    DEFVAL      { "" }
    ::= { tmnxIpTunnelEntry 18 }

tmnxIpTunnelReassembly           OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..5000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelReassembly specifies the maximum number of
         seconds to wait to receive all fragments of a particular IPSec or IP
         packet for reassembly.

         The tmnxIpTunnelReassembly value set to zero indicates that reassembly
         is disabled.

         The default tmnxIpTunnelReassembly value indicates that this value
         will be derived from the value of
         TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object.

         An 'inconsistentValue' error is returned if the value is not a
         multiple of 100 milliseconds."
    DEFVAL      { -1 }
    ::= { tmnxIpTunnelEntry 19 }

tmnxIpTunnelClearDfBit           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelClearDfBit specifies whether to clear Do not
         Fragment (DF) bit in the outgoing packets in this IP tunnel."
    DEFVAL      { false }
    ::= { tmnxIpTunnelEntry 20 }

tmnxIpTunnelIpMtu                OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 512..9000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIpMtu specifies the MTU size for IP packets
         for this IP tunnel.

         A value set to zero indicates maximum supported MTU size on the SAP
         for this IP tunnel."
    DEFVAL      { 0 }
    ::= { tmnxIpTunnelEntry 21 }

tmnxIpTunnelHostISA              OBJECT-TYPE
    SYNTAX      TmnxHwIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelHostISA indicates the active ISA MDA that is
         being used to host this tunnel.

         This object will contain a nonzero value only when the tunnel is
         both operationally up and being hosted by an MDA.  When the tunnel
         is being hosted by an ESA virtual machine, the host will be indicated
         by the tmnxIpTunnelHostEsa and tmnxIpTunnelHostEsaVm objects."
    ::= { tmnxIpTunnelEntry 22 }

tmnxIpTunnelEncapIpMtu           OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 512..9000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelEncapIpMtu specifies the MTU size for IP
         packets after tunnel encapsulation has been added.

         A value set to zero indicates maximum supported MTU size on the SAP
         for this tunnel."
    DEFVAL      { 0 }
    ::= { tmnxIpTunnelEntry 23 }

tmnxIpTunnelPropagateIpv6PMTU    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPropagateIpv6PMTU specifies whether to propagate
          path MTU to IPv6 hosts."
    DEFVAL      { true }
    ::= { tmnxIpTunnelEntry 24 }

tmnxIpTunnelIcmp6Pkt2Big         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIcmp6Pkt2Big specifies whether packet-too-big
         ICMP messages should be sent. When it is set to 'true', ICMPv6
         packet-too-big messages are generated by this ipsec tunnel. When
         tmnxIpTunnelIcmp6Pkt2Big is set to 'false', ICMPv6 packet-too-big
         messages are not sent."
    DEFVAL      { true }
    ::= { tmnxIpTunnelEntry 25 }

tmnxIpTunnelIcmp6NumPkt2Big      OBJECT-TYPE
    SYNTAX      Unsigned32 (10..1000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIcmp6NumPkt2Big specifies how many
         packet-too-big ICMPv6 messages are issued in the time frame specified
         by tmnxIpTunnelIcmp6Pkt2BigTime."
    DEFVAL      { 100 }
    ::= { tmnxIpTunnelEntry 26 }

tmnxIpTunnelIcmp6Pkt2BigTime     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIcmp6Pkt2BigTime specifies the time frame in
         seconds that is used to limit the number of packet-too-big ICMPv6
         messages issued per time frame."
    DEFVAL      { 10 }
    ::= { tmnxIpTunnelEntry 27 }

tmnxIpTunnelGreHeaderSendKey     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelGreHeaderSendKey specifies the send-key value
         used while transmitting Gre Header. This value is considered only when
         tmnxIpTunnelGreHeaderKeysSet is enabled."
    DEFVAL      { 0 }
    ::= { tmnxIpTunnelEntry 28 }

tmnxIpTunnelGreHeaderRcvKey      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelGreHeaderRcvKey specifies the receive value
         in Gre Header used to validate the received packets. This value is
         considered only when tmnxIpTunnelGreHeaderKeysSet is enabled."
    DEFVAL      { 0 }
    ::= { tmnxIpTunnelEntry 29 }

tmnxIpTunnelGreHeaderKeysSet     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelGreHeaderKeysSet specifies whether to
         transmit the GRE header using the configured send-key, and whether to
         validate that the GRE headers of received packets contain the
         configured receive-key."
    DEFVAL      { false }
    ::= { tmnxIpTunnelEntry 30 }

tmnxIpTunnelOperChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelOperChanged indicates the sysUpTime at the
         time of the last operational status change of this entry."
    ::= { tmnxIpTunnelEntry 31 }

tmnxIpTunnelPubTcpMssAdjust      OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0 | 512..9000)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPubTcpMssAdjust specifies the Maximum Segment
         Size (MSS) for the TCP traffic in an IP tunnel which is sent from the
         public network to the private network. The system may use this value
         to adjust or insert the MSS option in a TCP SYN packet.

         The TCP MSS adjustment functionality on the public side network is
         disabled when the following conditions are met.
         1) The value of tmnxIpTunnelPubTcpMssAdjust is '-1' or
         2) The values of tmnxIpTunnelPubTcpMssAdjust and
            tmnxIpTunnelEncapIpMtu are both '0'.

         When the system receives a TCP SYN packet from the public network and
         this packet contains an MSS option, the system replaces the MSS option
         value with a new MSS when the new MSS is smaller than the MSS option
         value.

         When the system receives a TCP SYN packet from the public network and
         this packet does not contain an MSS option, the system inserts one
         with a new MSS.

         The new MSS is calculated based on the following rules.
         1) When the value of tmnxIpTunnelPubTcpMssAdjust is '0' and
            tmnxIpTunnelEncapIpMtu has a non-zero value,
            New MSS = tmnxIpTunnelEncapIpMtu - total header size (e.g.,
                      IP tunnel overhead, TCP and IP headers)
         2) When the value of tmnxIpTunnelPubTcpMssAdjust is in the range
            of (512..9000)
            New MSS = tmnxIpTunnelPubTcpMssAdjust"
    REFERENCE
        "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012"
    DEFVAL      { -1 }
    ::= { tmnxIpTunnelEntry 32 }

tmnxIpTunnelPrivTcpMssAdjust     OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 512..9000)
    UNITS       "octets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPrivTcpMssAdjust specifies the Maximum
         Segment Size (MSS) for the TCP traffic in an IP tunnel which is sent
         from the private network to the public network. The system may use
         this value to adjust or insert the MSS option in a TCP SYN packet.

         The value of '-1' specifies that the TCP MSS adjustment functionality
         on the private side is disabled.

         When the system receives a TCP SYN packet from the private network and
         this packet contains an MSS option, the system replaces the MSS option
         value with tmnxIpTunnelPrivTcpMssAdjust when the value of
         tmnxIpTunnelPrivTcpMssAdjust is smaller than the MSS option value.

         When the system receives a TCP SYN packet from the private network and
         this packet does not contain an MSS option, the system inserts one
         whose MSS is equal to tmnxIpTunnelPrivTcpMssAdjust."
    REFERENCE
        "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012"
    DEFVAL      { -1 }
    ::= { tmnxIpTunnelEntry 33 }

tmnxIpTunnelDeliverySvcName      OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelDeliverySvcName specifies the name of the
         tunnel delivery service.

         The value of tmnxIpTunnelDeliverySvcName must be an empty string when
         tmnxIpTunnelDeliverySvcId is not default and vice-versa."
    DEFVAL      { ''H }
    ::= { tmnxIpTunnelEntry 34 }

tmnxIpTunnelHostEsa              OBJECT-TYPE
    SYNTAX      TmnxEsaIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelHostEsa indicates the active ESA that is
         being used to host this tunnel.

         This object will contain a nonzero value only when the tunnel is both
         operationally up and being hosted by an ESA virtual machine. When the
         tunnel is being hosted by an ISA MDA, the host will be indicated by
         the tmnxIpTunnelHostISA object."
    ::= { tmnxIpTunnelEntry 35 }

tmnxIpTunnelHostEsaVm            OBJECT-TYPE
    SYNTAX      TmnxEsaVmIdOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelHostEsaVm indicates the active ESA virtual
         machine that is being used to host this tunnel.

         This object will contain a nonzero value only when the tunnel is both
         operationally up and being hosted by an ESA virtual machine. When the
         tunnel is being hosted by an ISA MDA, the host will be indicated by
         the tmnxIpTunnelHostISA object."
    ::= { tmnxIpTunnelEntry 36 }

tmnxIpTunnelIPsecTransportMdProf OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIPsecTransportMdProf indicates IPsec
         transport mode profile associated with this IP tunnel."
    DEFVAL      { ''H }
    ::= { tmnxIpTunnelEntry 37 }

tmnxIpTunnelPropagateIpv4PMTU    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPropagateIpv4PMTU specifies whether or not to
         propagate a path MTU to IPv4 hosts."
    DEFVAL      { true }
    ::= { tmnxIpTunnelEntry 38 }

tmnxIpTunnelIcmpFragReq          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIcmpFragReq specifies whether or not
         'Fragmentation required and DF flag set' ICMP messages should be sent.
         When it is set to 'true (1)', the ICMP messages are transmitted by
         this Ip tunnel. When tmnxIpTunnelIcmpFragReq is set to 'false (2)',
         the ICMP messages are not sent.

         When the value of tmnxIpTunnelIcmpFragReq is 'false (2)', it must be
         set in the same SNMP PDU as tmnxIpTunnelIcmpFragReqNum and
         tmnxIpTunnelIcmpFragReqTime. The value of tmnxIpTunnelIcmpFragReqNum
         and tmnxIpTunnelIcmpFragReqTime must be their default values."
    DEFVAL      { true }
    ::= { tmnxIpTunnelEntry 39 }

tmnxIpTunnelIcmpFragReqNum       OBJECT-TYPE
    SYNTAX      Unsigned32 (10..1000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIcmpFragReqNum specifies how many
         'Fragmentation required and DF flag set' ICMP messages are transmitted
         in the time frame specified by tmnxIpTunnelIcmpFragReqTime.

         This value must be set in the same SNMP SET PDU as
         tmnxIpTunnelIcmpFragReq."
    DEFVAL      { 100 }
    ::= { tmnxIpTunnelEntry 40 }

tmnxIpTunnelIcmpFragReqTime      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelIcmpFragReqTime specifies the time frame in
         seconds that is used to limit the number of 'Fragmentation required
         and DF flag set' ICMP messages transmitted per time frame.

         This value must be set in the same SNMP SET PDU as
         tmnxIpTunnelIcmpFragReq."
    DEFVAL      { 10 }
    ::= { tmnxIpTunnelEntry 41 }

tmnxIpTunnelPMTUDiscoverAging    OBJECT-TYPE
    SYNTAX      Unsigned32 (900..3600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPMTUDiscoverAging specifies the number of
         seconds used to age out the learned MTU, which is obtained through
         path MTU discovery."
    DEFVAL      { 900 }
    ::= { tmnxIpTunnelEntry 42 }

tmnxIpTnlDstAddrTableLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlDstAddrTableLastChanged indicates the sysUpTime
         at the time of the last modification to tmnxIpTnlDstAddrTable by
         adding, deleting an entry or change to a writable object in the table.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 143 }

tmnxIpTnlDstAddrTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxIpTnlDstAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxIpTnlDstAddrTable contains destination addresses for each IP
         tunnel in the system.

         Entries are created and deleted by the user."
    ::= { tmnxSapObjs 144 }

tmnxIpTnlDstAddrEntry            OBJECT-TYPE
    SYNTAX      TmnxIpTnlDstAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxIpTnlDstAddrEntry contains information about a single
         destination address in an IP Tunnel."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxIpTunnelName,
        tmnxIpTnlDstAddrType,
        tmnxIpTnlDstAddr
    }
    ::= { tmnxIpTnlDstAddrTable 1 }

TmnxIpTnlDstAddrEntry            ::= SEQUENCE
{
    tmnxIpTnlDstAddrType             InetAddressType,
    tmnxIpTnlDstAddr                 InetAddress,
    tmnxIpTnlDstAddrRowStatus        RowStatus,
    tmnxIpTnlDstAddrLastChanged      TimeStamp,
    tmnxIpTnlDstAddrResolved         TruthValue
}

tmnxIpTnlDstAddrType             OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlDstAddrType specifies the address type of
         address in tmnxIpTnlDstAddr."
    ::= { tmnxIpTnlDstAddrEntry 1 }

tmnxIpTnlDstAddr                 OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16|20))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlDstAddr specifies the address of the destination
         of this IP tunnel."
    ::= { tmnxIpTnlDstAddrEntry 2 }

tmnxIpTnlDstAddrRowStatus        OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The tmnxIpTnlDstAddrRowStatus object is used to create and delete rows
         in the tmnxIpTnlDstAddrTable."
    ::= { tmnxIpTnlDstAddrEntry 3 }

tmnxIpTnlDstAddrLastChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlDstAddrLastChanged indicates the sysUpTime at
         the time of the last modification of this entry."
    ::= { tmnxIpTnlDstAddrEntry 4 }

tmnxIpTnlDstAddrResolved         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlDstAddrResolved indicates whether or not this IP
         tunnel destination address has been resolved as reachable by the
         virtual router."
    ::= { tmnxIpTnlDstAddrEntry 5 }

tmnxIpTunnelStatsTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxIpTunnelStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxIpTunnelStatsTable contains statistics entries per IP tunnel."
    ::= { tmnxSapObjs 145 }

tmnxIpTunnelStatsEntry           OBJECT-TYPE
    SYNTAX      TmnxIpTunnelStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxIpTunnelStatsEntry contains statistics information for a
         single IP Tunnel."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxIpTunnelName
    }
    ::= { tmnxIpTunnelStatsTable 1 }

TmnxIpTunnelStatsEntry           ::= SEQUENCE
{
    tmnxIpTunnelPktsTx               Counter64,
    tmnxIpTunnelPktsTxLo             Counter32,
    tmnxIpTunnelPktsTxHi             Counter32,
    tmnxIpTunnelPktsRx               Counter64,
    tmnxIpTunnelPktsRxLo             Counter32,
    tmnxIpTunnelPktsRxHi             Counter32,
    tmnxIpTunnelBytesTx              Counter64,
    tmnxIpTunnelBytesTxLo            Counter32,
    tmnxIpTunnelBytesTxHi            Counter32,
    tmnxIpTunnelBytesRx              Counter64,
    tmnxIpTunnelBytesRxLo            Counter32,
    tmnxIpTunnelBytesRxHi            Counter32,
    tmnxIpTunnelTxErrors             Counter32,
    tmnxIpTunnelRxErrors             Counter32,
    tmnxIpTunnelKeyIgnoredRx         Counter64,
    tmnxIpTunnelKeyIgnoredRxLo       Counter32,
    tmnxIpTunnelKeyIgnoredRxHi       Counter32,
    tmnxIpTunnelSeqIgnoredRx         Counter64,
    tmnxIpTunnelSeqIgnoredRxLo       Counter32,
    tmnxIpTunnelSeqIgnoredRxHi       Counter32,
    tmnxIpTunnelVersUnsupRx          Counter64,
    tmnxIpTunnelVersUnsupRxLo        Counter32,
    tmnxIpTunnelVersUnsupRxHi        Counter32,
    tmnxIpTunnelInvalidChksumRx      Counter64,
    tmnxIpTunnelInvalidChksumRxLo    Counter32,
    tmnxIpTunnelInvalidChksumRxHi    Counter32,
    tmnxIpTunnelLoopsRx              Counter64,
    tmnxIpTunnelLoopsRxLo            Counter32,
    tmnxIpTunnelLoopsRxHi            Counter32,
    tmnxIpTunnelTooBigTx             Counter64,
    tmnxIpTunnelTooBigTxLo           Counter32,
    tmnxIpTunnelTooBigTxHi           Counter32,
    tmnxIpTunnelKeyMismatchRx        Counter64,
    tmnxIpTunnelEncapOverhead        Unsigned32,
    tmnxIpTunnelPreEncapFragCount    Counter64,
    tmnxIpTunnelPreEncapFragLastSize Unsigned32,
    tmnxIpTunnelPostEncapFragCount   Counter64,
    tmnxIpTunnelPostEncapFragLstSize Unsigned32,
    tmnxIpTunnelTempPrivMtu          Unsigned32
}

tmnxIpTunnelPktsTx               OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPktsTx indicates the number of packets this
         IP Tunnel has sent."
    ::= { tmnxIpTunnelStatsEntry 1 }

tmnxIpTunnelPktsTxLo             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPktsTxLo indicates lower 32 bits of the value
         of tmnxIpTunnelPktsTx object."
    ::= { tmnxIpTunnelStatsEntry 2 }

tmnxIpTunnelPktsTxHi             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPktsTxHi indicates higher 32 bits of the
         value of tmnxIpTunnelPktsTx object."
    ::= { tmnxIpTunnelStatsEntry 3 }

tmnxIpTunnelPktsRx               OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPktsRx indicates the number of packets this
         IP Tunnel has received."
    ::= { tmnxIpTunnelStatsEntry 4 }

tmnxIpTunnelPktsRxLo             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPktsRxLo indicates lower 32 bits of the value
         of tmnxIpTunnelPktsRx object."
    ::= { tmnxIpTunnelStatsEntry 5 }

tmnxIpTunnelPktsRxHi             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPktsRxHi indicates higher 32 bits of the
         value of tmnxIpTunnelPktsRx object."
    ::= { tmnxIpTunnelStatsEntry 6 }

tmnxIpTunnelBytesTx              OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBytesTx indicates the number of bytes this IP
         Tunnel has sent."
    ::= { tmnxIpTunnelStatsEntry 7 }

tmnxIpTunnelBytesTxLo            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBytesTxLo indicates lower 32 bits of the
         value of tmnxIpTunnelBytesTx object."
    ::= { tmnxIpTunnelStatsEntry 8 }

tmnxIpTunnelBytesTxHi            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBytesTxHi indicates higher 32 bits of the
         value of tmnxIpTunnelBytesTx object."
    ::= { tmnxIpTunnelStatsEntry 9 }

tmnxIpTunnelBytesRx              OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBytesRx indicates the number of bytes this IP
         Tunnel has received."
    ::= { tmnxIpTunnelStatsEntry 10 }

tmnxIpTunnelBytesRxLo            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBytesRxLo indicates lower 32 bits of the
         value of tmnxIpTunnelBytesRx object."
    ::= { tmnxIpTunnelStatsEntry 11 }

tmnxIpTunnelBytesRxHi            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelBytesRxHi indicates higher 32 bits of the
         value of tmnxIpTunnelBytesRx object."
    ::= { tmnxIpTunnelStatsEntry 12 }

tmnxIpTunnelTxErrors             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelTxErrors indicates the number of packet
         transmit errors."
    ::= { tmnxIpTunnelStatsEntry 13 }

tmnxIpTunnelRxErrors             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelRxErrors indicates the number of packet
         receive errors."
    ::= { tmnxIpTunnelStatsEntry 14 }

tmnxIpTunnelKeyIgnoredRx         OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelKeyIgnoredRx indicates the number of packets
         this IP Tunnel received and processed ignoring key field."
    ::= { tmnxIpTunnelStatsEntry 15 }

tmnxIpTunnelKeyIgnoredRxLo       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelKeyIgnoredRxLo indicates lower 32 bits of the
         value of tmnxIpTunnelKeyIgnoredRx object."
    ::= { tmnxIpTunnelStatsEntry 16 }

tmnxIpTunnelKeyIgnoredRxHi       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelKeyIgnoredRxHi indicates higher 32 bits of
         the value of tmnxIpTunnelKeyIgnoredRx object."
    ::= { tmnxIpTunnelStatsEntry 17 }

tmnxIpTunnelSeqIgnoredRx         OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelSeqIgnoredRx indicates the number of packets
         this IP Tunnel and processed ignoring sequence field."
    ::= { tmnxIpTunnelStatsEntry 18 }

tmnxIpTunnelSeqIgnoredRxLo       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelSeqIgnoredRxLo indicates lower 32 bits of the
         value of tmnxIpTunnelSeqIgnoredRx object."
    ::= { tmnxIpTunnelStatsEntry 19 }

tmnxIpTunnelSeqIgnoredRxHi       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelSeqIgnoredRxHi indicates higher 32 bits of
         the value of tmnxIpTunnelSeqIgnoredRx object."
    ::= { tmnxIpTunnelStatsEntry 20 }

tmnxIpTunnelVersUnsupRx          OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelVersUnsupRx indicates the number of packets
         this IP Tunnel received with unsupported IP version and were dropped."
    ::= { tmnxIpTunnelStatsEntry 21 }

tmnxIpTunnelVersUnsupRxLo        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelVersUnsupRxLo indicates lower 32 bits of the
         value of tmnxIpTunnelVersUnsupRx object."
    ::= { tmnxIpTunnelStatsEntry 22 }

tmnxIpTunnelVersUnsupRxHi        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelVersUnsupRxHi indicates higher 32 bits of the
         value of tmnxIpTunnelVersUnsupRx object."
    ::= { tmnxIpTunnelStatsEntry 23 }

tmnxIpTunnelInvalidChksumRx      OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelInvalidChksumRx indicates the number of
         packets this IP Tunnel received with invalid checksum and were
         dropped."
    ::= { tmnxIpTunnelStatsEntry 24 }

tmnxIpTunnelInvalidChksumRxLo    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelInvalidChksumRxLo indicates lower 32 bits of
         the value of tmnxIpTunnelInvalidChksumRx object."
    ::= { tmnxIpTunnelStatsEntry 25 }

tmnxIpTunnelInvalidChksumRxHi    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelInvalidChksumRxHi indicates higher 32 bits of
         the value of tmnxIpTunnelInvalidChksumRx object."
    ::= { tmnxIpTunnelStatsEntry 26 }

tmnxIpTunnelLoopsRx              OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelLoopsRx indicates the number of packets this
         IP Tunnel received with payload with destination address which could
         result in a loop and were dropped."
    ::= { tmnxIpTunnelStatsEntry 27 }

tmnxIpTunnelLoopsRxLo            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelLoopsRxLo indicates lower 32 bits of the
         value of tmnxIpTunnelLoopsRx object."
    ::= { tmnxIpTunnelStatsEntry 28 }

tmnxIpTunnelLoopsRxHi            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelLoopsRxHi indicates higher 32 bits of the
         value of tmnxIpTunnelLoopsRx object."
    ::= { tmnxIpTunnelStatsEntry 29 }

tmnxIpTunnelTooBigTx             OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelTooBigTx indicates the number of packets this
         IP Tunnel received which were too big to transmit."
    ::= { tmnxIpTunnelStatsEntry 30 }

tmnxIpTunnelTooBigTxLo           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelTooBigTxLo indicates lower 32 bits of the
         value of tmnxIpTunnelTooBigTx object."
    ::= { tmnxIpTunnelStatsEntry 31 }

tmnxIpTunnelTooBigTxHi           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelTooBigTxHi indicates higher 32 bits of the
         value of tmnxIpTunnelTooBigTx object."
    ::= { tmnxIpTunnelStatsEntry 32 }

tmnxIpTunnelKeyMismatchRx        OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelKeyMismatchRx indicates the number of packets
         this IP Tunnel received with key mismatch."
    ::= { tmnxIpTunnelStatsEntry 33 }

tmnxIpTunnelEncapOverhead        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelEncapOverhead indicates the encapsulation
         overhead for this IP Tunnel."
    ::= { tmnxIpTunnelStatsEntry 34 }

tmnxIpTunnelPreEncapFragCount    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPreEncapFragCount indicates the number of
         fragmentations that occurred prior to encapsulation for this IP
         Tunnel. Pre-encapsulation fragmentation occurs for IPv4 packets whose
         size exceeds tmnxIpTunnelIpMtu."
    ::= { tmnxIpTunnelStatsEntry 35 }

tmnxIpTunnelPreEncapFragLastSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPreEncapFragLastSize indicates the size of
         the last packet which caused a pre-encapsulation fragmentation to
         occur for this IP Tunnel."
    ::= { tmnxIpTunnelStatsEntry 36 }

tmnxIpTunnelPostEncapFragCount   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPostEncapFragCount indicates the number of
         fragmentations that occurred after encapsulation for this IP Tunnel.
         Post-encapsulation fragmentation occurs when the encapsulated packet
         size exceeds tmnxIpTunnelEncapIpMtu."
    ::= { tmnxIpTunnelStatsEntry 37 }

tmnxIpTunnelPostEncapFragLstSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelPostEncapFragLstSize indicates the size of
         the last encapsulated packet which caused a post-encapsulation
         fragmentation to occur for this IP Tunnel."
    ::= { tmnxIpTunnelStatsEntry 38 }

tmnxIpTunnelTempPrivMtu          OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTunnelTempPrivMtu indicates the size of temporary
         private MTU for this IP Tunnel."
    ::= { tmnxIpTunnelStatsEntry 39 }

sapExtTableLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapExtTableLastChanged indicates the sysUpTime at the
         time of the last modification to sapExtTable by adding, deleting an
         entry or change to a writable object in the table.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 146 }

sapExtTable                      OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapExtTable contains additional entries specific to SAPs in the
         system."
    ::= { tmnxSapObjs 147 }

sapExtEntry                      OBJECT-TYPE
    SYNTAX      SapExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapExtEntry contains additional information about a single SAP
         entry."
    AUGMENTS    { sapBaseInfoEntry }
    ::= { sapExtTable 1 }

SapExtEntry                      ::= SEQUENCE
{
    sapExtLastChanged                TimeStamp,
    sapExtLagActivePort              TmnxPortID,
    sapDCpuProtPolicy                TNamedItemOrEmpty,
    sapCflowd                        INTEGER,
    sapStatHostMacLearnOptions       BITS,
    sapBandwidth                     Unsigned32,
    sapOperDCpuProtPolicy            TNamedItemOrEmpty,
    sapIngQGrpRedirectList           TNamedItemOrEmpty,
    sapEgrQGrpRedirectList           TNamedItemOrEmpty,
    sapEgrQosQueueOvrHsSecShaper     TNamedItemOrEmpty,
    sapFwdWhlSaleEpipeSvcId          TmnxServId,
    sapIngressQinqTranslation        INTEGER,
    sapIngressQinqInnerTranslationId Integer32,
    sapIngressQinqOuterTranslationId Integer32,
    sapBandwidthHi                   Unsigned32,
    sapEgressQosVlanQosPlcy          TLNamedItemOrEmpty,
    sapIngQtagManipulationOuterTag   Integer32,
    sapIngQtagManipulationInnerTag   Integer32,
    sapIngQtagManipulationAction     TmnxSapQtagManipulationAction,
    sapEgrQtagManipulationAction     TmnxSapQtagManipulationAction,
    sapEgressQosEgrRemarkPlcy        TLNamedItemOrEmpty,
    sapEgressAggRateCIRLmt           Integer32,
    sapIngressAggregatePolicerRateHi TmnxHigh32,
    sapIngressAggregatePolicerRateLo TmnxLow32,
    sapIngressAggregatePolicerBurst  Integer32,
    sapIngressAggregatePolicerCIRHi  TmnxHigh32,
    sapIngressAggregatePolicerCIRLo  TmnxLow32,
    sapIngressAggregatePolicerCBS    Integer32,
    sapIngressIPCriteriaOvrTag       Integer32,
    sapIngressIPv6CriteriaOvrTag     Integer32,
    sapEgrVlanQosPlcyPortRedirect    TruthValue,
    sapIngressIpFilterPair           TruthValue
}

sapExtLastChanged                OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapExtLastChanged indicates the sysUpTime at the time of
         the last modification of this entry."
    ::= { sapExtEntry 1 }

sapExtLagActivePort              OBJECT-TYPE
    SYNTAX      TmnxPortID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapExtLagActivePort indicates a port on the lag
         associated with this SAP, that is used when tLagPerLinkHash is enabled
         on the lag or when sapLagLinkMapProfile is configured on this SAP."
    ::= { sapExtEntry 2 }

sapDCpuProtPolicy                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapDCpuProtPolicy associates Distributed CPU Protection
         Policy with a SAP."
    DEFVAL      { ''H }
    ::= { sapExtEntry 3 }

sapCflowd                        OBJECT-TYPE
    SYNTAX      INTEGER {
        none        (1),
        ingressOnly (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapCflowd specifies the type and direction of Cflowd
         analysis applied to this SAP. A Cflowd profile controls the sampling
         and analysis of data flows through the service.  A value of 'none (1)'
         indicates that there is no Cflowd analysis associated with this SAP."
    DEFVAL      { none }
    ::= { sapExtEntry 4 }

sapStatHostMacLearnOptions       OBJECT-TYPE
    SYNTAX      BITS {
        singleMac     (0),
        dataTriggered (1)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHostMacLearnOptions applies to the static hosts of
         this SAP.

         When the 'singleMac' option is set, this system ensures that there is
         at any time only a single MAC address per SAP, learned through ICMPv6.
         When the 'dataTriggered' option is set, MAC learning is also triggered
         by data packets, as opposed to only by subscriber control plane
         packets such as DHCP or ARP.

         A bit in this object can only be set for a SAP in a group interface,
         that is each row in the sapBaseInfoTable where the value of
         sapIesIfIndex corresponds to a row in the vRtrIfTable where the value
         of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'."
    DEFVAL      { {} }
    ::= { sapExtEntry 5 }

sapBandwidth                     OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapBandwidth specifies the administrative bandwidth
         assigned to this SAP entry."
    DEFVAL      { 0 }
    ::= { sapExtEntry 6 }

sapOperDCpuProtPolicy            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapOperDCpuProtPolicy indicates the Operational
         Distributed CPU Protection Policy."
    ::= { sapExtEntry 7 }

sapIngQGrpRedirectList           OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQGrpRedirectList specifies the queue-group redirect
         list applied to the ingress SAP.

         This object is only supported for interface SAP within an IES or VPRN
         service."
    DEFVAL      { ''H }
    ::= { sapExtEntry 8 }

sapEgrQGrpRedirectList           OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQGrpRedirectList specifies the queue-group redirect
         list applied to the egress SAP.

         This object is only supported for interface SAP within an IES or VPRN
         service."
    DEFVAL      { ''H }
    ::= { sapExtEntry 9 }

sapEgrQosQueueOvrHsSecShaper     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueOvrHsSecShaper specifies the HS secondary
         shaper applied to this SAP.

         The value must correspond to an entry in the
         TIMETRA-PORT-MIB::tPortHsSecShapTable. If the empty string (default
         value) is specified, then the default secondary shaper will be used."
    DEFVAL      { "" }
    ::= { sapExtEntry 10 }

sapFwdWhlSaleEpipeSvcId          OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapFwdWhlSaleEpipeSvcId specifies the EPIPE service to
         which PPPoE packets on ingress with ether-types 0x8863 and 0x8864 will
         be redirected."
    DEFVAL      { 0 }
    ::= { sapExtEntry 12 }

sapIngressQinqTranslation        OBJECT-TYPE
    SYNTAX      INTEGER {
        none    (1),
        qinqIds (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressQinqTranslation specifies the desired Ingress
         Qinq Vlan Translation.

         A value of 'qinqIds' specifies that the value of
         sapIngressQinqInnerTranslationId and sapIngressQinqOuterTranslationId
         is to be used to overwrite the preserved qinq id's in the packet.

         An 'inconsistentValue' error is returned when an attempt is made to
         set the value of sapIngressQinqTranslation to 'qinqIds' and
         sapIngressQinqInnerTranslationId and sapIngressQinqOuterTranslationId
         are set to '-1'."
    DEFVAL      { none }
    ::= { sapExtEntry 13 }

sapIngressQinqInnerTranslationId OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressQinqInnerTranslationId specifies the inner
         ingress vlan translation for two service delimiting vlan values."
    DEFVAL      { -1 }
    ::= { sapExtEntry 14 }

sapIngressQinqOuterTranslationId OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressQinqOuterTranslationId specifies the outer
         ingress vlan translation for two service delimiting vlan values."
    DEFVAL      { -1 }
    ::= { sapExtEntry 15 }

sapBandwidthHi                   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapBandwidthHi specifies the upper 32-bit value of
         administrative bandwidth assigned to this SAP entry.


         An 'inconsistentValue' error is returned when this object is changed
         to non-default value and sapBandwidth value is not set in the same
         pdu."
    DEFVAL      { 0 }
    ::= { sapExtEntry 16 }

sapEgressQosVlanQosPlcy          OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressQosVlanQosPlcy specifies the name to associate
         with this SAP."
    DEFVAL      { "default" }
    ::= { sapExtEntry 17 }

sapIngQtagManipulationOuterTag   OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQtagManipulationOuterTag specifies a valid outer
         q-tag to  be used at SAP ingress by action indicated by
         sapIngQtagManipulationAction. Value -1 indicates
         sapIngQtagManipulationOuterTag is not applicable and should not be
         used."
    DEFVAL      { -1 }
    ::= { sapExtEntry 18 }

sapIngQtagManipulationInnerTag   OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..4094)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQtagManipulationInnerTag specifies a valid inner
         q-tag to  be used at SAP ingress by action indicated by
         sapIngQtagManipulationAction. Value -1 indicates
         sapIngQtagManipulationInnerTag is not applicable and should not be
         used."
    DEFVAL      { -1 }
    ::= { sapExtEntry 19 }

sapIngQtagManipulationAction     OBJECT-TYPE
    SYNTAX      TmnxSapQtagManipulationAction
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngQtagManipulationAction specifies the action to manipulate
         the q-tag(s) of the packets at SAP ingress.  The action uses a valid value
         of sapIngQtagManipulationOuterTag for outer q-tag and
         and a valid value of sapIngQtagManipulationInnerTag for inner q-tag.

         Value replaceAndPushOuter (8) is not applicable to ingress, therefore
         it is not allowed to be assigned to sapIngQtagManipulationAction.

         sapIngQtagManipulationAction is initialized to notApplicable (0) on
         SAPs that don't support q-tag manipulation, and thus not allowed to
         change.

         sapIngQtagManipulationAction is only applicable and changeable when
         TIMETRA-SERV-MIB::svcType is epipe or vpls and
         TIMETRA-PORT-MIB::tmnxPortEncapType is nullEncap or qEncap or
         qinqEncap.

         The default depends on the value of the objects
         TIMETRA-PORT-MIB::tmnxPortEncapType and
         TIMETRA-SAP-MIB::sapEncapValue."
    ::= { sapExtEntry 20 }

sapEgrQtagManipulationAction     OBJECT-TYPE
    SYNTAX      TmnxSapQtagManipulationAction
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQtagManipulationAction specifies the action to manipulate
         the q-tag(s) of the packets at SAP egress.  Unlike ingress, at egress
         the action uses the vlan-id of the SAP for inner and outer q-tag
         to push or replace.

         Value popOuterAndReplaceInner (5) is not applicable to egress,
         therefore  it is not allowed to be assigned to
         sapEgrQtagManipulationAction.

         sapEgrQtagManipulationAction is initialized to notApplicable (0) on
         SAPs that don't support q-tag manipulation, and thus not allowed to
         change.

         sapEgrQtagManipulationAction is only applicable and changeable when
         TIMETRA-SERV-MIB::svcType is epipe or vpls and
         TIMETRA-PORT-MIB::tmnxPortEncapType is nullEncap or qEncap or
         qinqEncap.

         The default depends on the value of the objects
         TIMETRA-PORT-MIB::tmnxPortEncapType and
         TIMETRA-SAP-MIB::sapEncapValue."
    ::= { sapExtEntry 21 }

sapEgressQosEgrRemarkPlcy        OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressQosEgrRemarkPlcy specifies the name to associate
         with this SAP."
    DEFVAL      { "default" }
    ::= { sapExtEntry 22 }

sapEgressAggRateCIRLmt           OBJECT-TYPE
    SYNTAX      Integer32 (-1..400000000)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgressAggRateCIRLmt specifies the aggregate CIR rate
         of all egress queues for this SAP."
    DEFVAL      { 0 }
    ::= { sapExtEntry 23 }

sapIngressAggregatePolicerRateHi OBJECT-TYPE
    SYNTAX      TmnxHigh32 (0 | 4294967295)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressAggregatePolicerRateHi specifies the upper 32
         bits of the rate to be used in kbps.

         This value should always be set along with
         sapIngressAggregatePolicerRateLo, otherwise an 'inconsistentValue'
         error is returned.

         When the value of sapIngressAggregatePolicerRateHi along with the
         value of sapIngressAggregatePolicerRateLo is set to 4294967295
         (0xFFFFFFFF), rate for this policer indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapExtEntry 82 }

sapIngressAggregatePolicerRateLo OBJECT-TYPE
    SYNTAX      TmnxLow32 (144..1000000000 | 4294967295)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressAggregatePolicerRateLo specifies the lower 32
         bits of the rate to be used in kbps.

         This value should always be set along with
         sapIngressAggregatePolicerRateHi, otherwise an 'inconsistentValue'
         error is returned.

         When the value of sapIngressAggregatePolicerRateHi along with the
         value of sapIngressAggregatePolicerRateLo is set to 4294967295
         (0xFFFFFFFF), rate for this policer indicates maximum rate."
    DEFVAL      { 4294967295 }
    ::= { sapExtEntry 83 }

sapIngressAggregatePolicerBurst  OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 1..33292)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressAggregatePolicerBurst specifies the burst to be
         used. The value -1 means maximum burst."
    DEFVAL      { -1 }
    ::= { sapExtEntry 84 }

sapIngressAggregatePolicerCIRHi  OBJECT-TYPE
    SYNTAX      TmnxHigh32 (0 | 4294967295)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressAggregatePolicerCIRHi specifies the upper 32
         bits of the rate to be used in kbps.

         This value should always be set along with
         sapIngressAggregatePolicerCIRLo, otherwise an 'inconsistentValue'
         error is returned.

         When the value of sapIngressAggregatePolicerCIRHi along with the value
         of sapIngressAggregatePolicerCIRLo is set to 4294967295 (0xFFFFFFFF),
         cir for this policer indicates maximum cir.

         When the value of sapIngressAggregatePolicerCIRHi is set to a value of
         4294967295 (0xFFFFFFFF) along with sapIngressAggregatePolicerCIRLo is
         set to 4294967294 (0xFFFFFFFE), cir is not configured for this
         policer.

         Operational cir:
         +------------------+-------------+
         |   cir Hi/Lo      | Oper cir    |
         +------------------+-------------+
         | 0xFFFFFFFF (Hi)  |  max rate   |
         | 0xFFFFFFFF (Lo)  |             |
         +------------------+-------------+
         | 0xFFFFFFFF (Hi)  |  cir = pir  |
         | 0xFFFFFFFE (Lo)  |             |
         +------------------+-------------+"
    DEFVAL      { 4294967295 }
    ::= { sapExtEntry 85 }

sapIngressAggregatePolicerCIRLo  OBJECT-TYPE
    SYNTAX      TmnxLow32 (0..1000000000 | 4294967295 | 4294967294)
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressAggregatePolicerCIRLo specifies the lower 32
         bits of the rate to be used in kbps.

         This value should always be set along with
         sapIngressAggregatePolicerCIRLo, otherwise an 'inconsistentValue'
         error is returned.

         When the value of sapIngressAggregatePolicerCIRHi along with the value
         of sapIngressAggregatePolicerCIRLo is set to 4294967295 (0xFFFFFFFF),
         cir for this policer indicates maximum cir.

         When the value of sapIngressAggregatePolicerCIRHi is set to a value of
         4294967295 (0xFFFFFFFF) along with sapIngressAggregatePolicerCIRLo is
         set to 4294967294 (0xFFFFFFFE), cir is not configured for this
         policer.

         Operational cir:
         +------------------+-------------+
         |   cir Hi/Lo      | Oper cir    |
         +------------------+-------------+
         | 0xFFFFFFFF (Hi)  |  max rate   |
         | 0xFFFFFFFF (Lo)  |             |
         +------------------+-------------+
         | 0xFFFFFFFF (Hi)  |  cir = pir  |
         | 0xFFFFFFFE (Lo)  |             |
         +------------------+-------------+"
    DEFVAL      { 4294967294 }
    ::= { sapExtEntry 86 }

sapIngressAggregatePolicerCBS    OBJECT-TYPE
    SYNTAX      Integer32 (-2 | -1 | 1..33292)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressAggregatePolicerCBS specifies the cbs to be
         used. The value -1 means maximum cbs, value -2 means
         sapIngressAggregatePolicerCBS is not configured for this policer


         Operational cbs:
         +------------------+-------------+
         |      cbs         | Oper cbs    |
         +------------------+-------------+
         |      -1          |  max rate   |
         +------------------+-------------+
         |      -2          |  cbs = mbs  |
         +------------------+-------------+"
    DEFVAL      { -2 }
    ::= { sapExtEntry 87 }

sapIngressIPCriteriaOvrTag       OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressIPCriteriaOvrTag specifies the tag-id for the
         IP Criteria override.

         A value of 0 means no ip-criteria override."
    DEFVAL      { 0 }
    ::= { sapExtEntry 88 }

sapIngressIPv6CriteriaOvrTag     OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapIngressIPv6CriteriaOvrTag specifies the tag-id for the
         IPv6 Criteria override.

         A value of 0 means no ipv6-criteria override."
    DEFVAL      { 0 }
    ::= { sapExtEntry 89 }

sapEgrVlanQosPlcyPortRedirect    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrVlanQosPlcyPortRedirect specifies whether port
         redirect is enabled with the vlan qos policy configured in
         sapEgressQosVlanQosPlcy."
    DEFVAL      { false }
    ::= { sapExtEntry 90 }

sapIngressIpFilterPair           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapIngressIpFilterPair specifies if ip filter
         pair has been enabled or disabled."
    DEFVAL      { false }
    ::= { sapExtEntry 91 }

sapDcpFpStaticStatTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapDcpFpStaticStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapDcpFpStaticStatTable has the statistics information of the
         static-policer configured on Distributed CPU Protection Policy per SAP
         per forwarding plane."
    ::= { tmnxSapObjs 148 }

sapDcpFpStaticStatEntry          OBJECT-TYPE
    SYNTAX      SapDcpFpStaticStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticStatEntry represents statistics information
         per SAP per forwarding plane for the static-policer configured on
         Distributed CPU Protection Policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxChassisIndex,
        tmnxCardSlotNum,
        tmnxFPNum,
        sapDcpFpStaticPlcrName
    }
    ::= { sapDcpFpStaticStatTable 1 }

SapDcpFpStaticStatEntry          ::= SEQUENCE
{
    sapDcpFpStaticPlcrName           TNamedItem,
    sapDcpFpStaticState              TmnxDistCpuProtState,
    sapDcpFpStaticExcdCount          Counter64,
    sapDcpFpStaticExcdCountHi        Counter32,
    sapDcpFpStaticExcdCountLo        Counter32,
    sapDcpFpStaticHoldDown           TmnxDistCpuProtActionDuration,
    sapDcpFpStaticDetectionTime      Unsigned32
}

sapDcpFpStaticPlcrName           OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticPlcrName specifies the static-policer name
         for Distributed CPU Protection Policy."
    ::= { sapDcpFpStaticStatEntry 1 }

sapDcpFpStaticState              OBJECT-TYPE
    SYNTAX      TmnxDistCpuProtState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticState indicates the state of the
         static-policer configured on Distributed CPU Protection Policy."
    ::= { sapDcpFpStaticStatEntry 2 }

sapDcpFpStaticExcdCount          OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticExcdCount indicates number of packets
         exceeding the policing parameters since the given static-policer was
         previously declared as conformant or newly instantiated."
    ::= { sapDcpFpStaticStatEntry 3 }

sapDcpFpStaticExcdCountHi        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticExcdCountHi indicates upper 32-bits of
         sapDcpFpStaticExcdCount."
    ::= { sapDcpFpStaticStatEntry 4 }

sapDcpFpStaticExcdCountLo        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticExcdCountLo indicates lower 32-bits of
         sapDcpFpStaticExcdCount."
    ::= { sapDcpFpStaticStatEntry 5 }

sapDcpFpStaticHoldDown           OBJECT-TYPE
    SYNTAX      TmnxDistCpuProtActionDuration
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticHoldDown indicates the remaining hold-down
         period for a given static-policer."
    ::= { sapDcpFpStaticStatEntry 6 }

sapDcpFpStaticDetectionTime      OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpStaticDetectionTime indicates the detection time
         remaining for a given static-policer."
    ::= { sapDcpFpStaticStatEntry 7 }

sapDcpFpDynStatTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapDcpFpDynStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapDcpFpDynStatTable has the statistics information of the dynamic
         policer for a particular protocol configured on Distributed CPU
         Protection Policy per SAP per forwarding plane."
    ::= { tmnxSapObjs 149 }

sapDcpFpDynStatEntry             OBJECT-TYPE
    SYNTAX      SapDcpFpDynStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynStatEntry represents statistics information
         per SAP per forwarding plane for the dynamic policer for a particular
         protocol configured on Distributed CPU Protection Policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxChassisIndex,
        tmnxCardSlotNum,
        tmnxFPNum,
        sapDcpFpProtocol
    }
    ::= { sapDcpFpDynStatTable 1 }

SapDcpFpDynStatEntry             ::= SEQUENCE
{
    sapDcpFpProtocol                 TmnxDistCpuProtProtocolId,
    sapDcpFpDynState                 TmnxDistCpuProtState,
    sapDcpFpDynExcdCount             Counter64,
    sapDcpFpDynExcdCountHi           Counter32,
    sapDcpFpDynExcdCountLo           Counter32,
    sapDcpFpDynHoldDown              TmnxDistCpuProtActionDuration,
    sapDcpFpDynDetectionTime         Unsigned32,
    sapDcpFpDynAllocated             TruthValue
}

sapDcpFpProtocol                 OBJECT-TYPE
    SYNTAX      TmnxDistCpuProtProtocolId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpProtocol specifies the protocol name to be
         monitored by Distributed CPU Protection Policy."
    ::= { sapDcpFpDynStatEntry 1 }

sapDcpFpDynState                 OBJECT-TYPE
    SYNTAX      TmnxDistCpuProtState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynState indicates the state of the dynamic
         policer for a particular protocol configured on Distributed CPU
         Protection Policy."
    ::= { sapDcpFpDynStatEntry 2 }

sapDcpFpDynExcdCount             OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynExcdCount indicates number of packets
         exceeding the policing parameters since the dynamic policer for the
         given protocol was previously declared as conformant or newly
         instantiated."
    ::= { sapDcpFpDynStatEntry 3 }

sapDcpFpDynExcdCountHi           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynExcdCountHi indicates upper 32-bits of
         sapDcpFpDynExcdCount."
    ::= { sapDcpFpDynStatEntry 4 }

sapDcpFpDynExcdCountLo           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynExcdCountLo indicates lower 32-bits of
         sapDcpFpDynExcdCount."
    ::= { sapDcpFpDynStatEntry 5 }

sapDcpFpDynHoldDown              OBJECT-TYPE
    SYNTAX      TmnxDistCpuProtActionDuration
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynHoldDown indicates the remaining hold-down
         period for the dynamic policer for a given protocol."
    ::= { sapDcpFpDynStatEntry 6 }

sapDcpFpDynDetectionTime         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynDetectionTime indicates the detection time
         remaining for the dynamic policer for a given protocol."
    ::= { sapDcpFpDynStatEntry 7 }

sapDcpFpDynAllocated             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpDynAllocated indicates whether dynamic policer
         has been allocated for this protocol."
    ::= { sapDcpFpDynStatEntry 8 }

sapDcpFpLocMonStatTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapDcpFpLocMonStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapDcpFpLocMonStatTable has the statistics information of the
         local-monitoring policer configured on Distributed CPU Protection
         Policy per SAP per forwarding plane."
    ::= { tmnxSapObjs 150 }

sapDcpFpLocMonStatEntry          OBJECT-TYPE
    SYNTAX      SapDcpFpLocMonStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonStatTable represents statistics information
         per SAP per forwarding plane for the local-monitoring policer
         configured on Distributed CPU Protection Policy."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxChassisIndex,
        tmnxCardSlotNum,
        tmnxFPNum,
        sapDcpFpLocMonPlcrName
    }
    ::= { sapDcpFpLocMonStatTable 1 }

SapDcpFpLocMonStatEntry          ::= SEQUENCE
{
    sapDcpFpLocMonPlcrName           TNamedItem,
    sapDcpFpLocMonState              TmnxDistCpuProtState,
    sapDcpFpLocMonExcdCount          Counter64,
    sapDcpFpLocMonExcdCountHi        Counter32,
    sapDcpFpLocMonExcdCountLo        Counter32,
    sapDcpFpLocMonAllDynAlloc        TruthValue
}

sapDcpFpLocMonPlcrName           OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonPlcrName specifies the local monitoring
         policy name for Distributed CPU Protection Policy."
    ::= { sapDcpFpLocMonStatEntry 1 }

sapDcpFpLocMonState              OBJECT-TYPE
    SYNTAX      TmnxDistCpuProtState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonState indicates the state of the
         local-monitoring policer configured on Distributed CPU Protection
         Policy."
    ::= { sapDcpFpLocMonStatEntry 2 }

sapDcpFpLocMonExcdCount          OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonExcdCount indicates number of packets
         exceeding the policing parameters since the given local-monitoring
         policer was previously declared as conformant or newly instantiated."
    ::= { sapDcpFpLocMonStatEntry 3 }

sapDcpFpLocMonExcdCountHi        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonExcdCountHi indicates upper 32-bits of
         sapDcpFpLocMonExcdCount."
    ::= { sapDcpFpLocMonStatEntry 4 }

sapDcpFpLocMonExcdCountLo        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonExcdCountLo indicates lower 32-bits of
         sapDcpFpLocMonExcdCount."
    ::= { sapDcpFpLocMonStatEntry 5 }

sapDcpFpLocMonAllDynAlloc        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDcpFpLocMonAllDynAlloc indicates whether all the
         dynamic policers associated with this local-monitor have been
         allocated."
    ::= { sapDcpFpLocMonStatEntry 6 }

sapNotificationObjects           OBJECT IDENTIFIER ::= { tmnxSapObjs 151 }

sapDcpTimeEventOccured           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of sapDcpTimeEventOccured indicates the actual time the
         event was detected in the system which may differ from the time that
         event was collected by the logging infrastructure."
    ::= { sapNotificationObjects 1 }

sapTlsStaticIsidRngTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsStaticIsidRngEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table maintains the static ISID range information for SAPs."
    ::= { tmnxSapObjs 152 }

sapTlsStaticIsidRngEntry         OBJECT-TYPE
    SYNTAX      SapTlsStaticIsidRngEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry maintains the static range information for a specific SAP
         in a specific VPLS service ."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsStaticIsidRngId
    }
    ::= { sapTlsStaticIsidRngTable 1 }

SapTlsStaticIsidRngEntry         ::= SEQUENCE
{
    sapTlsStaticIsidRngId            Unsigned32,
    sapTlsStaticIsidRngRowStatus     RowStatus,
    sapTlsStaticIsidRngLastChanged   TimeStamp,
    sapTlsStaticIsidRngLow           TmnxISID,
    sapTlsStaticIsidRngHigh          TmnxISID
}

sapTlsStaticIsidRngId            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8191)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsidRngId specifies the range identifier for
         the ISID policy."
    ::= { sapTlsStaticIsidRngEntry 1 }

sapTlsStaticIsidRngRowStatus     OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsidRngRowStatus is used for the creation and
         deletion of rows in this table."
    ::= { sapTlsStaticIsidRngEntry 2 }

sapTlsStaticIsidRngLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsidRngLastChanged indicates the timestamp of
         last change to this row in sapTlsStaticIsidRngTable."
    ::= { sapTlsStaticIsidRngEntry 3 }

sapTlsStaticIsidRngLow           OBJECT-TYPE
    SYNTAX      TmnxISID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsidRngLow specifies the low value of the
         range for this entry."
    DEFVAL      { 0 }
    ::= { sapTlsStaticIsidRngEntry 4 }

sapTlsStaticIsidRngHigh          OBJECT-TYPE
    SYNTAX      TmnxISID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsidRngHigh specifies the high value of the
         range for this entry."
    DEFVAL      { 0 }
    ::= { sapTlsStaticIsidRngEntry 5 }

sapTlsDhcp6InfoTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsDhcp6InfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapTlsDhcp6InfoTable contains DHCP6 information related to a TLS
         SAP.

         This table augments the sapTlsDhcpInfoTable, and contains an entry for
         each TLS SAP.

         Rows in this table are created and deleted automatically by the
         system."
    ::= { tmnxSapObjs 153 }

sapTlsDhcp6InfoEntry             OBJECT-TYPE
    SYNTAX      SapTlsDhcp6InfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP6 specific information for a TLS SAP."
    AUGMENTS    { sapTlsDhcpInfoEntry }
    ::= { sapTlsDhcp6InfoTable 1 }

SapTlsDhcp6InfoEntry             ::= SEQUENCE
{
    sapTlsDhcp6AdminState            TmnxEnabledDisabled,
    sapTlsDhcp6Description           ServObjDesc,
    sapTlsDhcp6Snoop                 TmnxEnabledDisabled,
    sapTlsDhcp6InterfaceId           INTEGER,
    sapTlsDhcp6RemoteId              INTEGER,
    sapTlsDhcp6RemoteIdString        DisplayString
}

sapTlsDhcp6AdminState            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcp6AdminState specifies the overall
         enabled/disabled state of all DHCP6 related actions on this SAP.

         The value 'disabled' allows the user to configure individual DHCP6
         commands but administratively disables them."
    DEFVAL      { disabled }
    ::= { sapTlsDhcp6InfoEntry 1 }

sapTlsDhcp6Description           OBJECT-TYPE
    SYNTAX      ServObjDesc
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcp6Description specifies a user
         provided description for DHCP6 on this SAP. It consists of any
         printable, seven-bit ASCII characters up to 80 characters in length."
    DEFVAL      { ''H }
    ::= { sapTlsDhcp6InfoEntry 2 }

sapTlsDhcp6Snoop                 OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcp6Snoop specifies the
         enabled/disabled state for DHCP6 snooping on this SAP. Note that in
         order for snooping to be enabled the object sapTlsDhcp6AdminState must
         also have the value enabled."
    DEFVAL      { disabled }
    ::= { sapTlsDhcp6InfoEntry 3 }

sapTlsDhcp6InterfaceId           OBJECT-TYPE
    SYNTAX      INTEGER {
        asciiTuple     (1),
        vlanAsciiTuple (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcp6InterfaceId specifies
         the content of the interface id option (18):
         - 'asciiTuple'    the ASCII-encoded concatenated tuple
                           consisting of the
                              - access-node-identifier
                              - service-id
                              - SAP ID
                           is used.
         - 'vlanAsciiTuple' the format will include VLAN ID and dot1p
                           bits in addition to what is included in
                           ascii-tuple already. The format is
                           supported on dot1q and qinq encapsulated
                           ports only."
    REFERENCE
        "Lightweight DHCPv6 Relay Agent
         draft-ietf-dhc-dhcpv6-ldra-03 paragraph 5.3.2"
    DEFVAL      { asciiTuple }
    ::= { sapTlsDhcp6InfoEntry 4 }

sapTlsDhcp6RemoteId              OBJECT-TYPE
    SYNTAX      INTEGER {
        none      (1),
        mac       (2),
        remote-id (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcp6RemoteId specifies
         the presence and contents of the remote-id option (37):
         - 'none'      the remote-id option will not be included
                       in the RELAY-FORW (12) message.
         - 'mac'       the MAC address of the remote end.
         - 'remote-id' the value of the object
                       sapTlsDhcp6RemoteIdString."
    REFERENCE
        "RFC 4649 paragraph 3"
    DEFVAL      { none }
    ::= { sapTlsDhcp6InfoEntry 5 }

sapTlsDhcp6RemoteIdString        OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object sapTlsDhcp6RemoteIdString specifies the
         remote-id.

         This object has a non empty value only if the object
         sapTlsDhcp6RemoteId has a value of 'remote-id'."
    DEFVAL      { "" }
    ::= { sapTlsDhcp6InfoEntry 6 }

sapTlsStaticIsidTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsStaticIsidEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table maintains the information for each static ISID for SAPs."
    ::= { tmnxSapObjs 154 }

sapTlsStaticIsidEntry            OBJECT-TYPE
    SYNTAX      SapTlsStaticIsidEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry maintains the information for a specific ISID associated
         with the specific SAP in a specific VPLS service.

         Entries are created and deleted by the system."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsStaticIsid
    }
    ::= { sapTlsStaticIsidTable 1 }

SapTlsStaticIsidEntry            ::= SEQUENCE
{
    sapTlsStaticIsid                 TmnxISID,
    sapTlsStaticIsidStatus           TmnxIsidMFibStatus
}

sapTlsStaticIsid                 OBJECT-TYPE
    SYNTAX      TmnxISID
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsid indicates ISID of this entry."
    ::= { sapTlsStaticIsidEntry 1 }

sapTlsStaticIsidStatus           OBJECT-TYPE
    SYNTAX      TmnxIsidMFibStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsStaticIsidStatus indicates the MFIB status of this
         ISID."
    ::= { sapTlsStaticIsidEntry 2 }

sapEthLoopbackTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEthLoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table sapEthLoopbackTable provides operators with the ability to
         provide loopback functions on a specific SAP in order to test Ethernet
         Virtual Circuits (EVC)."
    ::= { tmnxSapObjs 155 }

sapEthLoopbackEntry              OBJECT-TYPE
    SYNTAX      SapEthLoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents an active SAP loopback. The SAP is placed in
         loopback by row creation and is removed by row destruction.

         Rows in table sapEthLoopbackTable are created and destroyed by SNMP
         set operations on the object sapEthLoopbackRowStatus. Rows in table
         sapEthLoopbackTable may be destroyed by the system when the associated
         SAP has been deleted. A maximum of 64 rows may be created. Rows are
         kept in volatile storage and lost upon a system reboot."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapEthLoopbackTable 1 }

SapEthLoopbackEntry              ::= SEQUENCE
{
    sapEthLoopbackRowStatus          RowStatus,
    sapEthLoopbackMode               INTEGER,
    sapEthLoopbackMacSwap            TmnxEnabledDisabled,
    sapEthLoopbackMacSwapAddr        MacAddress,
    sapEthLoopbackMacSwapAddrAll     TruthValue,
    sapEthLoopbackOperState          ServiceOperStatus
}

sapEthLoopbackRowStatus          OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEthLoopbackRowStatus specifies the row
         status. It allows entries to be created and deleted in
         sapEthLoopbackTable.

         Rows are created by specifying the value 'createAndGo(4)' and deleted
         by specifying the value 'destroy(6)'. If the associated SAP is
         deleted, the sapEthLoopbackEntry row will be deleted by the system.

         Row creation will fail if the service identifier and the SAP do not
         exist in MIB table sapBaseInfoTable with a sapType of 'epipe(1)' or
         'tls(3)', which encompasses EPIPE, PBB (Provider Backbone Bridging)
         EPIPE, VPLS (Virtual Private LAN Service), and I-VPLS services."
    ::= { sapEthLoopbackEntry 1 }

sapEthLoopbackMode               OBJECT-TYPE
    SYNTAX      INTEGER {
        ingress (1),
        egress  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEthLoopbackMode specifies how traffic will
         be reflected.

         If the value is set to 'ingress(1)', traffic arriving at the SAP
         ingress will be reflected back out the same SAP. If the value is set
         to 'egress(2)', traffic arriving at the SAP egress will be reflected
         back into the service in the direction of the original source."
    ::= { sapEthLoopbackEntry 2 }

sapEthLoopbackMacSwap            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEthLoopbackMacSwap specifies the enabling
         or disabling of source address and destination address swapping for
         the reflected packets when the arriving packet is unicast. With
         sapEthLoopbackMacSwap enabled, any broadcast or multicast packets
         arriving on a looped point will be dropped."
    DEFVAL      { disabled }
    ::= { sapEthLoopbackEntry 3 }

sapEthLoopbackMacSwapAddr        OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEthLoopbackMacSwapAddr specifies the source
         MAC address used in the reflected packet when the arriving packet is
         broadcast or multicast. This does not apply to arriving unicast
         packets."
    DEFVAL      { '000000000000'H }
    ::= { sapEthLoopbackEntry 4 }

sapEthLoopbackMacSwapAddrAll     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapEthLoopbackMacSwapAddrAll specifies whether
         or not to use the configured sapEthLoopbackMacSwapAddr as the source
         address for all reflected parameters."
    DEFVAL      { false }
    ::= { sapEthLoopbackEntry 5 }

sapEthLoopbackOperState          OBJECT-TYPE
    SYNTAX      ServiceOperStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapEthLoopbackOperState indicates operational
         status of the active SAP loopback."
    ::= { sapEthLoopbackEntry 6 }

sapTlsFdbMacStatsTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapTlsFdbMacStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table maintains the count of MAC address entries per FDB type for
         the SAPs in VPLS services."
    ::= { tmnxSapObjs 156 }

sapTlsFdbMacStatsEntry           OBJECT-TYPE
    SYNTAX      SapTlsFdbMacStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry maintains the count of MAC address entries per FDB type for
         the SAP in a VPLS service."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tlsFdbType
    }
    ::= { sapTlsFdbMacStatsTable 1 }

SapTlsFdbMacStatsEntry           ::= SEQUENCE
{ sapTlsFdbMacStatsNumEntries      Unsigned32 }

sapTlsFdbMacStatsNumEntries      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsFdbMacStatsNumEntries indicates the number of MAC
         address entries of the FDB type in the SAP in this service."
    ::= { sapTlsFdbMacStatsEntry 1 }

tmnxSapTlsExInfoTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxSapTlsExInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is an augment of the sapTlsInfoTable table. Rows are
         created and destroyed automatically by the system."
    ::= { tmnxSapObjs 157 }

tmnxSapTlsExInfoEntry            OBJECT-TYPE
    SYNTAX      TmnxSapTlsExInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "TLS specific information about a SAP."
    AUGMENTS    { sapTlsInfoEntry }
    ::= { tmnxSapTlsExInfoTable 1 }

TmnxSapTlsExInfoEntry            ::= SEQUENCE
{
    tmnxSapTlsExLastChanged          TimeStamp,
    tmnxSapTlsExDhcpPythonPolicy     TNamedItemOrEmpty,
    tmnxSapTlsExDhcp6PythonPolicy    TNamedItemOrEmpty,
    tmnxSapTlsExRtrSolMsapTrigger    TruthValue,
    tmnxSapTlsExRtrSolUserDb         TNamedItemOrEmpty,
    tmnxSapTlsExProcCpmTrfcSapDn     TmnxEnabledDisabled,
    tmnxSapTlsExDiameterAuthPolicy   TNamedItemOrEmpty,
    tmnxSapTlsExPppoePythonPolicy    TNamedItemOrEmpty,
    tmnxSapTlsExAllowDot1qMsap       TruthValue,
    tmnxSapTlsExEgressDestMac        MacAddress,
    sapTlsDisableSendBvplsEvpnFlush  TruthValue,
    sapTlsAutoLrnMacProtectExcList   TNamedItemOrEmpty,
    sapTlsExBgpVplsMhVeId            TmnxVeId
}

tmnxSapTlsExLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value tmnxSapTlsExLastChanged indicates the sysUpTime at the time
         of the most recent management-initiated change to this row."
    ::= { tmnxSapTlsExInfoEntry 1 }

tmnxSapTlsExDhcpPythonPolicy     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExDhcpPythonPolicy specifies the name of the
         Python policy used for DHCP discover on this SAP.

         The Python policy referenced here needs to exist in the
         TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable."
    DEFVAL      { "" }
    ::= { tmnxSapTlsExInfoEntry 2 }

tmnxSapTlsExDhcp6PythonPolicy    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExDhcp6PythonPolicy specifies the name of the
         Python policy used for DHCP6 solicit on this SAP.

         The Python policy referenced here needs to exist in the
         TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable."
    DEFVAL      { "" }
    ::= { tmnxSapTlsExInfoEntry 3 }

tmnxSapTlsExRtrSolMsapTrigger    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExRtrSolMsapTrigger specifies whether the
         receipt of router solicit trigger packets on a VPLS SAP with a
         sapSubType value of 'capture' will result in a Radius authentication
         that will provide a service context and the creation of a SAP with a
         sapSubType value of 'managed'.

         An attempt to set the value tmnxSapTlsExRtrSolMsapTrigger to 'true' on
         a SAP with sapSubType other than 'capture' will return an
         'inconsistentValue' error."
    DEFVAL      { false }
    ::= { tmnxSapTlsExInfoEntry 4 }

tmnxSapTlsExRtrSolUserDb         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExRtrSolUserDb specifies the local user
         database to use for router solicit based authentication.

         If no authentication with the local user database is required, the
         value of this object must be set to the empty string.

         The value of tmnxSapTlsExRtrSolUserDb is only valid for a
         SAP with a sapSubType value of 'capture'. If the value is
         set to a  non-empty string for a SAP with a sapSubType
         value other than 'capture', an 'inconsistentValue' error
         will be returned."
    DEFVAL      { "" }
    ::= { tmnxSapTlsExInfoEntry 5 }

tmnxSapTlsExProcCpmTrfcSapDn     OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExProcCpmTrfcSapDn is applicable to simple SAPs
         configured on simple LAGs that are not part of any 'endpoint'
         configurations or complicated resiliency schemes like MC-LAG with
         inter-chassis-backup (ICB) configurations.

         When enabled, a simple LAG SAP will not be removed from the forwarding
         plane and flooded traffic (unknown unicast, broadcast and multicast)
         will be dropped on egress rather than ingress.This allows control
         traffic to be extracted on egress and where applicable processed by
         the CPM.

         The value of tmnxSapTlsExProcCpmTrfcSapDn will not prevent a VPLS
         service from entering an Operational Down state if it is the last
         active connection to enter a non-operational state. By default,
         without this value, when a LAG enters a non-operational state it is
         removed from the forwarding plane and traffic is dropped on ingress."
    DEFVAL      { disabled }
    ::= { tmnxSapTlsExInfoEntry 6 }

tmnxSapTlsExDiameterAuthPolicy   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExDiameterAuthPolicy specifies the name of the
         Diameter NASREQ application policy used for authentication.

         A non empty value is only allowed for a SAP with a sapSubType value of
         'capture'.

         A non empty value must correspond to a row in the
         TIMETRA-DIAMETER-MIB::tmnxDiamApNqTable."
    DEFVAL      { "" }
    ::= { tmnxSapTlsExInfoEntry 7 }

tmnxSapTlsExPppoePythonPolicy    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExPppoePythonPolicy specifies the Python policy
         used for modifying PPPoE packets on this SAP.

         A non empty value is only allowed for a SAP with a sapSubType value of
         'capture'.

         A nonzero value must correspond to a row in the
         TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable."
    DEFVAL      { "" }
    ::= { tmnxSapTlsExInfoEntry 8 }

tmnxSapTlsExAllowDot1qMsap       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapTlsExAllowDot1qMsap specifies if this system
         allows the creation of IEEE 802.1q encapsulated management SAPs while
         this capture SAP is on an IEEE 802.1ad port.

         An attempt to set the value tmnxSapTlsExAllowDot1qMsap to 'true' on a
         SAP with sapSubType other than 'capture' will return an
         'inconsistentValue' error.

         If this SAP is a capture SAP on an IEEE 802.1q port, the value of
         tmnxSapTlsExAllowDot1qMsap is ignored."
    DEFVAL      { false }
    ::= { tmnxSapTlsExInfoEntry 9 }

tmnxSapTlsExEgressDestMac        OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxSapTlsExEgressDestMac specifies the MAC
         address used to overwrite the destination mac address for all unicast
         packets egressing the given SAP."
    DEFVAL      { '000000000000'H }
    ::= { tmnxSapTlsExInfoEntry 10 }

sapTlsDisableSendBvplsEvpnFlush  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsDisableSendBvplsEvpnFlush specifies whether to send
         an ISID based CMAC flush indication when the sap goes oper-down."
    DEFVAL      { false }
    ::= { tmnxSapTlsExInfoEntry 11 }

sapTlsAutoLrnMacProtectExcList   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of sapTlsAutoLrnMacProtectExcList specifies mac-list name
         which contains MAC addresses to be excluded from auto learn mac
         protect"
    DEFVAL      { "" }
    ::= { tmnxSapTlsExInfoEntry 12 }

sapTlsExBgpVplsMhVeId            OBJECT-TYPE
    SYNTAX      TmnxVeId
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The sapTlsExBgpVplsMhVeId specifies BGP-VPLS multi-homing virtual edge
         identifier range."
    DEFVAL      { -1 }
    ::= { tmnxSapTlsExInfoEntry 13 }

sapLagPerLinkHashTableLastChgd   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashTableLastChgd indicates the sysUpTime at
         the time of the last modification to sapLagPerLinkHashTable by adding,
         deleting an entry or change to a writable object in the table.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 158 }

sapLagPerLinkHashTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapLagPerLinkHashEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapLagPerLinkHashTable maintains weighted per-link-hash related
         lag attributes per SAP. A LAG that has weighted per link hash enabled,
         will use the class and weight associated with the SAP to select a link
         for egress traffic over this SAP. Selection is done such that within
         each class the total weight of all SAPs/Users on each LAG link is as
         close as possible to other links in the LAG."
    ::= { tmnxSapObjs 159 }

sapLagPerLinkHashEntry           OBJECT-TYPE
    SYNTAX      SapLagPerLinkHashEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapLagPerLinkHashEntry maintains weighted per-link-hash related
         lag attributes for specific SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapLagPerLinkHashTable 1 }

SapLagPerLinkHashEntry           ::= SEQUENCE
{
    sapLagPerLinkHashLastChanged     TimeStamp,
    sapLagPerLinkHashClass           TmnxLagPerLinkHashClass,
    sapLagPerLinkHashWeight          TmnxLagPerLinkHashWeight,
    sapLagPerLinkHashOperClass       TmnxLagPerLinkHashClass,
    sapLagPerLinkHashOperWeight      TmnxLagPerLinkHashWeight,
    sapLagPerLinkHashIsOverriden     TruthValue
}

sapLagPerLinkHashLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashLastChanged indicates the sysUpTime at
         the time of the last modification of this entry."
    ::= { sapLagPerLinkHashEntry 1 }

sapLagPerLinkHashClass           OBJECT-TYPE
    SYNTAX      TmnxLagPerLinkHashClass
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashClass specifies the class to be used to
         select a LAG link for this SAP."
    DEFVAL      { 1 }
    ::= { sapLagPerLinkHashEntry 2 }

sapLagPerLinkHashWeight          OBJECT-TYPE
    SYNTAX      TmnxLagPerLinkHashWeight
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashWeight specifies the weight to be
         associated with this SAP when selecting a LAG link for this SAP."
    DEFVAL      { 1 }
    ::= { sapLagPerLinkHashEntry 3 }

sapLagPerLinkHashOperClass       OBJECT-TYPE
    SYNTAX      TmnxLagPerLinkHashClass
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashOperClass indicates the operational
         value for class associated with this SAP."
    ::= { sapLagPerLinkHashEntry 4 }

sapLagPerLinkHashOperWeight      OBJECT-TYPE
    SYNTAX      TmnxLagPerLinkHashWeight
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashOperWeight indicates the operational
         value used for weight associated with this SAP."
    ::= { sapLagPerLinkHashEntry 5 }

sapLagPerLinkHashIsOverriden     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapLagPerLinkHashIsOverriden indicates whether
         administrative values, subscriber management determined operational
         weight and class are used for this SAP."
    ::= { sapLagPerLinkHashEntry 6 }

tmnxSapIpoeTableLastChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapIpoeTableLastChanged indicates the sysUpTime at
         the time of the most recent change to the tmnxSapIpoeTable."
    ::= { tmnxSapObjs 160 }

tmnxSapIpoeTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxSapIpoeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table tmnxSapIpoeTable  contains IPoE session information related
         to a SAP with a sapSubType value of 'capture'."
    ::= { tmnxSapObjs 161 }

tmnxSapIpoeEntry                 OBJECT-TYPE
    SYNTAX      TmnxSapIpoeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information related to IPoE session for a
         SAP with a sapSubType value of 'capture'."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { tmnxSapIpoeTable 1 }

TmnxSapIpoeEntry                 ::= SEQUENCE
{
    tmnxSapIpoeLastChanged           TimeStamp,
    tmnxSapIpoeAdminState            TmnxEnabledDisabled,
    tmnxSapIpoeDescription           TItemDescription,
    tmnxSapIpoePolicy                TNamedItemOrEmpty,
    tmnxSapIpoeUserDb                TNamedItemOrEmpty
}

tmnxSapIpoeLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapIpoeLastChanged indicates the sysUpTime at the
         time of the most recent change to this table row."
    ::= { tmnxSapIpoeEntry 1 }

tmnxSapIpoeAdminState            OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxSapIpoeAdminState specifies the desired
         administrative state of this row."
    DEFVAL      { disabled }
    ::= { tmnxSapIpoeEntry 2 }

tmnxSapIpoeDescription           OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxSapIpoeDescription specifies a user
         provided description for IPoE on this Sap."
    DEFVAL      { "" }
    ::= { tmnxSapIpoeEntry 3 }

tmnxSapIpoePolicy                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapIpoePolicy specifies the IPoE policy applicable on
         this SAP."
    DEFVAL      { "" }
    ::= { tmnxSapIpoeEntry 4 }

tmnxSapIpoeUserDb                OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapIpoeUserDb specifies the local user database to
         use for authentication.

         If no authentication with the local user database is required, the
         value of this object must be set to the empty string."
    DEFVAL      { "" }
    ::= { tmnxSapIpoeEntry 5 }

tmnxStaticHostIpv6Objs           OBJECT IDENTIFIER ::= { tmnxSapObjs 162 }

sapStatHost6Table                OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapStatHost6Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapStatHost6Table is used to configure IPv6 static hosts on a SAP."
    ::= { tmnxStaticHostIpv6Objs 1 }

sapStatHost6Entry                OBJECT-TYPE
    SYNTAX      SapStatHost6Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information on a statically configured IPv6
         host.

         Entries can be created and deleted via SNMP SET operations."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapStatHost6IpAddress,
        sapStatHost6MacAddress
    }
    ::= { sapStatHost6Table 1 }

SapStatHost6Entry                ::= SEQUENCE
{
    sapStatHost6IpAddress            InetAddressIPv6,
    sapStatHost6MacAddress           MacAddress,
    sapStatHost6LastChanged          TimeStamp,
    sapStatHost6RowStatus            RowStatus,
    sapStatHost6AdminStatus          ServiceAdminStatus,
    sapStatHost6PrefixLen            InetAddressPrefixLength,
    sapStatHost6NextHopAddrType      InetAddressType,
    sapStatHost6NextHopAddr          InetAddress,
    sapStatHost6SubscrIdent          TmnxSubIdentStringOrEmpty,
    sapStatHost6SubProfile           ServObjName,
    sapStatHost6SlaProfile           ServObjName,
    sapStatHost6ShcvOperState        ServShcvOperState,
    sapStatHost6ShcvChecks           Unsigned32,
    sapStatHost6ShcvReplies          Unsigned32,
    sapStatHost6ShcvReplyTime        TimeStamp,
    sapStatHost6DynMacAddress        MacAddress,
    sapStatHost6RetailerSvcId        TmnxServId,
    sapStatHost6RetailerIf           InterfaceIndexOrZero,
    sapStatHost6FwdingState          TmnxOperState,
    sapStatHost6AncpString           TmnxAncpStringOrZero,
    sapStatHost6SubIdIsSapId         TruthValue,
    sapStatHost6AppProfile           ServObjName,
    sapStatHost6IntermediateDestId   DisplayString,
    sapStatHost6AdminRetailSvcId     TmnxServId,
    sapStatHost6AppProfileScope      TmnxSapAASubScope
}

sapStatHost6IpAddress            OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6IpAddress specifies the IP address
         of this static host."
    ::= { sapStatHost6Entry 1 }

sapStatHost6MacAddress           OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6MacAddress specifies the MAC
         address associated with this static host.

         The value 0:0:0:0:0:0 specifies 'no MAC address'."
    ::= { sapStatHost6Entry 2 }

sapStatHost6LastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6LastChanged indicates the sysUpTime at the
         time of the last modification of this conceptual row."
    ::= { sapStatHost6Entry 3 }

sapStatHost6RowStatus            OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6RowStatus controls the creation
         and deletion of rows in this table."
    ::= { sapStatHost6Entry 4 }

sapStatHost6AdminStatus          OBJECT-TYPE
    SYNTAX      ServiceAdminStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6AdminStatus specifies the administrative
         status of this host."
    DEFVAL      { down }
    ::= { sapStatHost6Entry 5 }

sapStatHost6PrefixLen            OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength (32..64 | 128)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6PrefixLen specifies the IPv6
         address prefix length associated with this host.

         A value for this object must be specified when the conceptual row is
         created, and it cannot be modified afterwards."
    ::= { sapStatHost6Entry 6 }

sapStatHost6NextHopAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6NextHopAddrType specifies the address type of
         sapStatHost6NextHopAddr."
    DEFVAL      { unknown }
    ::= { sapStatHost6Entry 7 }

sapStatHost6NextHopAddr          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6NextHopAddr specifies the IPv4 next hop
         address of this IPv6 static host.

         A non-empty value of this object refers to the associated IPv4 host in
         a dual stack model.

         A MAC address learned from either IPv6 or IPv4 host is also associated
         with the other ('mac-linking')."
    DEFVAL      { ''H }
    ::= { sapStatHost6Entry 8 }

sapStatHost6SubscrIdent          OBJECT-TYPE
    SYNTAX      TmnxSubIdentStringOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6SubscrIdent specifies the
         subscriber identification for this static host."
    DEFVAL      { "" }
    ::= { sapStatHost6Entry 9 }

sapStatHost6SubProfile           OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6SubProfile specifies the
         subscriber profile for this static host.

         A non-empty value of this object must correspond to a conceptual row
         in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable."
    DEFVAL      { "" }
    ::= { sapStatHost6Entry 10 }

sapStatHost6SlaProfile           OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6SlaProfile specifies the SLA
         profile for this static host.

         A non-empty value of this object must correspond to a conceptual row
         in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable."
    DEFVAL      { "" }
    ::= { sapStatHost6Entry 11 }

sapStatHost6ShcvOperState        OBJECT-TYPE
    SYNTAX      ServShcvOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6ShcvOperState indicates the state
         of the subscriber host connectivity check for this static host."
    ::= { sapStatHost6Entry 12 }

sapStatHost6ShcvChecks           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6ShcvChecks indicates the number of
         connectivity checks for this static host."
    ::= { sapStatHost6Entry 13 }

sapStatHost6ShcvReplies          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6ShcvReplies indicates the number
         of host replies for this static host."
    ::= { sapStatHost6Entry 14 }

sapStatHost6ShcvReplyTime        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6ShcvReplyTime indicates the
         timestamp of the last successful connectivity check for this static
         host."
    ::= { sapStatHost6Entry 15 }

sapStatHost6DynMacAddress        OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6DynMacAddress indicates the
         learned MAC address while sapStatHost6MacAddress is equal to
         0:0:0:0:0:0.

         The value 0:0:0:0:0:0 indicates that no MAC address is learned yet."
    ::= { sapStatHost6Entry 16 }

sapStatHost6RetailerSvcId        OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6RetailerSvcId indicates the
         service ID of the retailer VPRN service to which this static host
         belongs.

         When this object is non zero, the static host belongs to a retailer
         VPRN."
    ::= { sapStatHost6Entry 17 }

sapStatHost6RetailerIf           OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6RetailerIf indicates the interface
         index of the retailer VPRN interface to which this static host
         belongs.

         When this object is non zero, the static host belongs to a retailer
         VPRN."
    ::= { sapStatHost6Entry 18 }

sapStatHost6FwdingState          OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6FwdingState indicates the forwarding state of
         this static host.

         When the value is 'outOfService', host traffic is not forwarded; while
         it is 'inService', host traffic is forwarded."
    ::= { sapStatHost6Entry 19 }

sapStatHost6AncpString           OBJECT-TYPE
    SYNTAX      TmnxAncpStringOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6AncpString specifies the ancp-string
         associated to this SAP host."
    DEFVAL      { "" }
    ::= { sapStatHost6Entry 20 }

sapStatHost6SubIdIsSapId         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapStatHost6SubIdIsSapId specifies if the SAP
         ID is taken as subscriber identification for this static host."
    DEFVAL      { false }
    ::= { sapStatHost6Entry 21 }

sapStatHost6AppProfile           OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6AppProfile specifies the application profile
         for this static host.

         A non-empty value of this object must correspond to a conceptual row
         in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable."
    DEFVAL      { "" }
    ::= { sapStatHost6Entry 22 }

sapStatHost6IntermediateDestId   OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6IntermediateDestId specifies to which
         intermediate destination (for example a DSLAM) this host belongs."
    DEFVAL      { "" }
    ::= { sapStatHost6Entry 23 }

sapStatHost6AdminRetailSvcId     OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6AdminRetailSvcId specifies the forwarding
         service ID for an unnumbered static host in a wholesale/retail
         context."
    DEFVAL      { 0 }
    ::= { sapStatHost6Entry 24 }

sapStatHost6AppProfileScope      OBJECT-TYPE
    SYNTAX      TmnxSapAASubScope
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6AppProfileScope specifies the scope of IPv6
         static host application profile.

         The value of sapStatHost6AppProfileScope can only be set along with
         sapStatHost6AppProfile object, optionally. The value of
         sapStatHost6AppProfileScope cannot be modified once set."
    DEFVAL      { subscriber }
    ::= { sapStatHost6Entry 25 }

sapStatHost6MRtTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapStatHost6MRtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapStatHost6MRtTable contains managed routes of SAP static IPv6
         hosts.

         Entries can be created and deleted via SNMP SET operations."
    ::= { tmnxStaticHostIpv6Objs 2 }

sapStatHost6MRtEntry             OBJECT-TYPE
    SYNTAX      SapStatHost6MRtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information on a specific managed route."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapStatHost6IpAddress,
        sapStatHost6MacAddress,
        sapStatHost6MRtAddrType,
        sapStatHost6MRtAddr,
        sapStatHost6MRtPrefixLen
    }
    ::= { sapStatHost6MRtTable 1 }

SapStatHost6MRtEntry             ::= SEQUENCE
{
    sapStatHost6MRtAddrType          InetAddressType,
    sapStatHost6MRtAddr              InetAddress,
    sapStatHost6MRtPrefixLen         InetAddressPrefixLength,
    sapStatHost6MRtRowStatus         RowStatus,
    sapStatHost6MRtLastMgmtChange    TimeStamp,
    sapStatHost6MRtStatus            TmnxManagedRouteStatus,
    sapStatHost6MRtMetric            Unsigned32,
    sapStatHost6MRtPreference        Unsigned32,
    sapStatHost6MRtTag               Unsigned32
}

sapStatHost6MRtAddrType          OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtAddrType indicates the address type of
         sapStatHost6MRtAddr."
    ::= { sapStatHost6MRtEntry 1 }

sapStatHost6MRtAddr              OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtAddr indicates the IP address of the
         managed route."
    ::= { sapStatHost6MRtEntry 2 }

sapStatHost6MRtPrefixLen         OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength (0..128)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtPrefixLen indicates the prefix length of
         the subnet associated with sapStatHost6MRtAddr."
    ::= { sapStatHost6MRtEntry 3 }

sapStatHost6MRtRowStatus         OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtRowStatus controls the creation and
         deletion of rows in this table."
    ::= { sapStatHost6MRtEntry 4 }

sapStatHost6MRtLastMgmtChange    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtLastMgmtChange indicates the value of
         sysUpTime at the time of the last management change of any writable
         object of this row."
    ::= { sapStatHost6MRtEntry 5 }

sapStatHost6MRtStatus            OBJECT-TYPE
    SYNTAX      TmnxManagedRouteStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtStatus indicates the state of this managed
         route."
    ::= { sapStatHost6MRtEntry 6 }

sapStatHost6MRtMetric            OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtMetric specifies the route metric."
    DEFVAL      { 0 }
    ::= { sapStatHost6MRtEntry 7 }

sapStatHost6MRtPreference        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtPreference specifies the route preference.

         The value of the preference is compared with the preference of the
         routes coming from routing protocols."
    DEFVAL      { 0 }
    ::= { sapStatHost6MRtEntry 8 }

sapStatHost6MRtTag               OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtTag specifies the route tag."
    DEFVAL      { 0 }
    ::= { sapStatHost6MRtEntry 9 }

sapStatHost6TableLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6TableLastChanged indicates the sysUpTime at
         the time of the last modification to the sapStatHost6Table by adding,
         deleting an entry or change to a writable object in the table.

         If no changes were made to the table since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 163 }

sapStatHost6MRtTblLastChgd       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStatHost6MRtTblLastChgd indicates the sysUpTime at the
         time of the last modification of sapStatHost6MRtTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, this object contains a zero
         value."
    ::= { tmnxSapObjs 164 }

sapIngQosQueueDepthInfoTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapIngQosQueueDepthInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthInfoTable has an entry for each SAP
         ingress override queue for which the value of sapIngQosQMonitorDepth
         is set to 'true (1)'."
    ::= { tmnxSapObjs 165 }

sapIngQosQueueDepthInfoEntry     OBJECT-TYPE
    SYNTAX      SapIngQosQueueDepthInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthInfoEntry represents queue depth
         monitoring information for SAP ingress override queue for which the
         value of sapIngQosQMonitorDepth is set to 'true (1)'."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapIngQosQueueId
    }
    ::= { sapIngQosQueueDepthInfoTable 1 }

SapIngQosQueueDepthInfoEntry     ::= SEQUENCE
{
    sapIngQosQueueDepthPollPrcnt1    Unsigned32,
    sapIngQosQueueDepthPollPrcnt2    Unsigned32,
    sapIngQosQueueDepthPollPrcnt3    Unsigned32,
    sapIngQosQueueDepthPollPrcnt4    Unsigned32,
    sapIngQosQueueDepthPollPrcnt5    Unsigned32,
    sapIngQosQueueDepthPollPrcnt6    Unsigned32,
    sapIngQosQueueDepthPollPrcnt7    Unsigned32,
    sapIngQosQueueDepthPollPrcnt8    Unsigned32,
    sapIngQosQueueDepthPollPrcnt9    Unsigned32,
    sapIngQosQueueDepthPollPrcnt10   Unsigned32,
    sapIngQosQueueDepthAvgPollInt    Unsigned32,
    sapIngQosQueueDepthAvgElpsdTme   TimeStamp
}

sapIngQosQueueDepthPollPrcnt1    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt1 represents the percentage
         of polls in occupancy range of 0 to 10 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 1 }

sapIngQosQueueDepthPollPrcnt2    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt2 represents the percentage
         of polls in occupancy range of 11 to 20 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 2 }

sapIngQosQueueDepthPollPrcnt3    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt3 represents the percentage
         of polls in occupancy range of 21 to 30 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 3 }

sapIngQosQueueDepthPollPrcnt4    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt4 represents the percentage
         of polls in occupancy range of 31 to 40 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 4 }

sapIngQosQueueDepthPollPrcnt5    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt5 represents the percentage
         of polls in occupancy range of 41 to 50 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 5 }

sapIngQosQueueDepthPollPrcnt6    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt6 represents the percentage
         of polls in occupancy range of 51 to 60 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 6 }

sapIngQosQueueDepthPollPrcnt7    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt7 represents the percentage
         of polls in occupancy range of 61 to 70 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 7 }

sapIngQosQueueDepthPollPrcnt8    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt8 represents the percentage
         of polls in occupancy range of 71 to 80 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 8 }

sapIngQosQueueDepthPollPrcnt9    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt9 represents the percentage
         of polls in occupancy range of 81 to 90 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 9 }

sapIngQosQueueDepthPollPrcnt10   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthPollPrcnt10 represents the percentage
         of polls in occupancy range of 91 to 100 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 10 }

sapIngQosQueueDepthAvgPollInt    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthAvgPollInt represents the weighted
         average polling interval for the elapsed time."
    ::= { sapIngQosQueueDepthInfoEntry 11 }

sapIngQosQueueDepthAvgElpsdTme   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapIngQosQueueDepthAvgElpsdTme represents the average
         elapsed time since the start of queue depth monitoring or the last
         monitoring clear."
    ::= { sapIngQosQueueDepthInfoEntry 12 }

sapEgrQosQueueDepthInfoTable     OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosQueueDepthInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthInfoTable has an entry for each SAP
         egress override queue for which the value of sapEgrQosQMonitorDepth is
         set to 'true (1)'."
    ::= { tmnxSapObjs 166 }

sapEgrQosQueueDepthInfoEntry     OBJECT-TYPE
    SYNTAX      SapEgrQosQueueDepthInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthInfoEntry represents queue depth
         monitoring information for SAP egress override queue for which the
         value of sapEgrQosQMonitorDepth is set to 'true (1)'."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosQueueId
    }
    ::= { sapEgrQosQueueDepthInfoTable 1 }

SapEgrQosQueueDepthInfoEntry     ::= SEQUENCE
{
    sapEgrQosQueueDepthPollPrcnt1    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt2    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt3    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt4    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt5    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt6    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt7    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt8    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt9    Unsigned32,
    sapEgrQosQueueDepthPollPrcnt10   Unsigned32,
    sapEgrQosQueueDepthAvgPollInt    Unsigned32,
    sapEgrQosQueueDepthAvgElpsdTme   TimeStamp,
    sapEgrQosQueueDepthViolTotCnt    Unsigned32,
    sapEgrQosQueueDepthViolLast      TimeStamp,
    sapEgrQosQueueDepthHWMPollInt    Unsigned32
}

sapEgrQosQueueDepthPollPrcnt1    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt1 represents the percentage
         of polls in occupancy range of 0 to 10 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 1 }

sapEgrQosQueueDepthPollPrcnt2    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt2 represents the percentage
         of polls in occupancy range of 11 to 20 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 2 }

sapEgrQosQueueDepthPollPrcnt3    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt3 represents the percentage
         of polls in occupancy range of 21 to 30 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 3 }

sapEgrQosQueueDepthPollPrcnt4    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt4 represents the percentage
         of polls in occupancy range of 31 to 40 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 4 }

sapEgrQosQueueDepthPollPrcnt5    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt5 represents the percentage
         of polls in occupancy range of 41 to 50 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 5 }

sapEgrQosQueueDepthPollPrcnt6    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt6 represents the percentage
         of polls in occupancy range of 51 to 60 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 6 }

sapEgrQosQueueDepthPollPrcnt7    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt7 represents the percentage
         of polls in occupancy range of 61 to 70 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 7 }

sapEgrQosQueueDepthPollPrcnt8    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt8 represents the percentage
         of polls in occupancy range of 71 to 80 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 8 }

sapEgrQosQueueDepthPollPrcnt9    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt9 represents the percentage
         of polls in occupancy range of 81 to 90 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 9 }

sapEgrQosQueueDepthPollPrcnt10   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000)
    UNITS       "centipercent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthPollPrcnt10 represents the percentage
         of polls in occupancy range of 91 to 100 percent for the queue depths
         seen during the polling elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 10 }

sapEgrQosQueueDepthAvgPollInt    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthAvgPollInt represents the weighted
         average polling interval for the elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 11 }

sapEgrQosQueueDepthAvgElpsdTme   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthAvgElpsdTme represents the average
         elapsed time since the start of queue depth monitoring or the last
         monitoring clear."
    ::= { sapEgrQosQueueDepthInfoEntry 12 }

sapEgrQosQueueDepthViolTotCnt    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthViolTotCnt represents the total number
         of per hardware queue violation counts of the component queues."
    ::= { sapEgrQosQueueDepthInfoEntry 13 }

sapEgrQosQueueDepthViolLast      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthViolLast represents the most recent
         violation last seen timestamp of the component queues."
    ::= { sapEgrQosQueueDepthInfoEntry 14 }

sapEgrQosQueueDepthHWMPollInt    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "microseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosQueueDepthHWMPollInt represents the weighted
         average high-watermark polling interval for the elapsed time."
    ::= { sapEgrQosQueueDepthInfoEntry 15 }

sapStaticHostRipTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapStaticHostRipEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapStaticHostRipTable augments the sapStaticHostTable. This table
         contains the parameters used for RIP."
    ::= { tmnxSapObjs 167 }

sapStaticHostRipEntry            OBJECT-TYPE
    SYNTAX      SapStaticHostRipEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry contains parameters used for RIP."
    AUGMENTS    { sapStaticHostEntry }
    ::= { sapStaticHostRipTable 1 }

SapStaticHostRipEntry            ::= SEQUENCE
{
    sapStaticHostRipPlcyName         TNamedItemOrEmpty,
    sapStaticHostRipListenerStatus   TmnxRipListenerStatus
}

sapStaticHostRipPlcyName         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostRipPlcyName indicates the RIP policy which
         is used to set up the RIP listener for this static host."
    ::= { sapStaticHostRipEntry 1 }

sapStaticHostRipListenerStatus   OBJECT-TYPE
    SYNTAX      TmnxRipListenerStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapStaticHostRipListenerStatus indicates the status of
         the RIP listener."
    ::= { sapStaticHostRipEntry 2 }

sapEvpnMHEthSegTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEvpnMHEthSegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEvpnMHEthSegTable contains entries for ethernet segment
         information associated with a SAP."
    ::= { tmnxSapObjs 168 }

sapEvpnMHEthSegEntry             OBJECT-TYPE
    SYNTAX      SapEvpnMHEthSegEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An ethernet segment entry in the sapEvpnMHEthSegTable."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapEvpnMHEthSegTable 1 }

SapEvpnMHEthSegEntry             ::= SEQUENCE
{
    sapEvpnMHEthSegName              TNamedItemOrEmpty,
    sapEvpnMHEthSegStatus            TmnxEvpnMHEthSegStatus
}

sapEvpnMHEthSegName              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEvpnMHEthSegName indicates the ethernet segment name
         associated with the given SAP."
    ::= { sapEvpnMHEthSegEntry 1 }

sapEvpnMHEthSegStatus            OBJECT-TYPE
    SYNTAX      TmnxEvpnMHEthSegStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEvpnMHEthSegStatus indicates the status of the
         ethernet segment associated with the given SAP."
    ::= { sapEvpnMHEthSegEntry 2 }

sapDefHostExTableLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapDefHostExTableLastChanged indicates the
         value of sysUpTime at the time of the last modification of an
         conceptual row in the sapDefHostExTable."
    ::= { tmnxSapObjs 169 }

sapDefHostExTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapDefHostExEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP default host information.

         Entries in this table can be created or deleted via SNMP operations.

         A row in this table can only be created for a SAP in a group
         interface, that is each row in the sapBaseInfoTable where the value of
         sapIesIfIndex corresponds to a row in the vRtrIfTable where the value
         of vRtrIfType is equal to 'serviceIesGroup' or 'serviceVprnGroup'."
    ::= { tmnxSapObjs 170 }

sapDefHostExEntry                OBJECT-TYPE
    SYNTAX      SapDefHostExEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "SAP default host specific information."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapDefHostExSubnetAddrType,
        sapDefHostExSubnetAddr,
        sapDefHostExSubnetAddrPfxLen
    }
    ::= { sapDefHostExTable 1 }

SapDefHostExEntry                ::= SEQUENCE
{
    sapDefHostExSubnetAddrType       InetAddressType,
    sapDefHostExSubnetAddr           InetAddress,
    sapDefHostExSubnetAddrPfxLen     InetAddressPrefixLength,
    sapDefHostExRowStatus            RowStatus,
    sapDefHostExLastChanged          TimeStamp,
    sapDefHostExNextHopAddrType      InetAddressType,
    sapDefHostExNextHopAddr          InetAddress
}

sapDefHostExSubnetAddrType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostExSubnetAddrType indicates the address type of
         sapDefHostExSubnetAddr."
    ::= { sapDefHostExEntry 1 }

sapDefHostExSubnetAddr           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object sapDefHostExSubnetAddr specifies the IPv4
         Subnet or IPv6 Prefix address for this SAP default host.

         It must be equal to one of the addresses of the subscriber interface
         this SAP belongs to, that is one of its vRiaIpAddress values."
    ::= { sapDefHostExEntry 2 }

sapDefHostExSubnetAddrPfxLen     OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostExSubnetAddrPfxLen indicates the IPv4 Subnet or
         IPv6 Prefix length of sapDefHostExSubnetAddr."
    ::= { sapDefHostExEntry 3 }

sapDefHostExRowStatus            OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostExRowStatus specifies the row status of this
         row."
    ::= { sapDefHostExEntry 4 }

sapDefHostExLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostExLastChanged indicates the sysUpTime at the
         time of the most recent management-initiated change to this conceptual
         row."
    ::= { sapDefHostExEntry 5 }

sapDefHostExNextHopAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostExNextHopAddrType specifies the address type of
         sapDefHostExNextHopAddr."
    ::= { sapDefHostExEntry 6 }

sapDefHostExNextHopAddr          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapDefHostExNextHopAddr specifies the next-hop IP address
         for this SAP default host.

         The value all zeroes is not allowed.

         A value for sapDefHostExNextHopAddr must be specified when a row is
         created and this value cannot be changed afterwards."
    ::= { sapDefHostExEntry 7 }

tmnxSapDataTrigStatsTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxSapDataTrigStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxSapDataTrigStatsTable contains detailed statistics information
         about the data triggers involved in creating data-triggered subscriber
         hosts.

         The typical usage of this table is to fill in the part of the index
         that identifies a SAP, and perform a partial walk to get all the
         statistics applicable to that SAP."
    ::= { tmnxSapObjs 171 }

tmnxSapDataTrigStatsEntry        OBJECT-TYPE
    SYNTAX      TmnxSapDataTrigStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row contains detailed data trigger statistics
         information about a SAP.

         Entries in this table are created and removed automatically by the
         system

         The system creates conceptual rows in this table only for SAPs where
         the value of sapStatHostMacLearnOptions is equal to 'dataTriggered'.

         The system does not create rows unless there is at least one non-zero
         counter."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxSapDataTrigStatsId
    }
    ::= { tmnxSapDataTrigStatsTable 1 }

TmnxSapDataTrigStatsEntry        ::= SEQUENCE
{
    tmnxSapDataTrigStatsId           Unsigned32,
    tmnxSapDataTrigStatsName         DisplayString,
    tmnxSapDataTrigStatsVal          Counter64
}

tmnxSapDataTrigStatsId           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..20)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapDataTrigStatsId indicates the identifier of the
         SAP data trigger statistics contained in this conceptual row.

         It is a meaningless number generated by this system."
    ::= { tmnxSapDataTrigStatsEntry 1 }

tmnxSapDataTrigStatsName         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxSapDataTrigStatsName indicates the
         human-readable identifier of the statistics contained in this
         conceptual row."
    ::= { tmnxSapDataTrigStatsEntry 2 }

tmnxSapDataTrigStatsVal          OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxSapDataTrigStatsVal indicates the value of
         the statistics contained in this conceptual row."
    ::= { tmnxSapDataTrigStatsEntry 3 }

sapL3LoopbackTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapL3LoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table sapL3LoopbackTable provides operators with the ability to
         provide loopback functions on a specific interface."
    ::= { tmnxSapObjs 172 }

sapL3LoopbackEntry               OBJECT-TYPE
    SYNTAX      SapL3LoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents an active interface loopback. The interface is
         placed in loopback by row creation and is removed by row destruction.

         Rows in table sapL3LoopbackTable are created and destroyed by SNMP set
         operations on the object sapL3LoopbackRowStatus. Rows in table
         sapL3LoopbackTable may be destroyed by the system when the associated
         SAP has been deleted. A maximum of 64 rows may be created. Rows are
         kept in volatile storage and lost upon a system reboot."
    INDEX       {
        svcId,
        sapIesIfIndex
    }
    ::= { sapL3LoopbackTable 1 }

SapL3LoopbackEntry               ::= SEQUENCE
{
    sapL3LoopbackRowStatus           RowStatus,
    sapL3LoopbackIgnrPortOpState     ServiceOperStatus
}

sapL3LoopbackRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object sapL3LoopbackRowStatus specifies the row
         status. It allows entries to be created and deleted in
         sapL3LoopbackTable.

         Creation of an entry with VPRN or IES IP interface configured
         over an Ethernet SAP to  mask a non-operational port state for
         the interface. When this entry is created with an interface,
         it will mask the ports non-operational state but continue to
         execute all other functions to determine if the IP interface
         should be considered operationally up for reachability testing.

         This is applicable to IP interfaces within a VPRN and IES service
         configured on an Ethernet SAP."
    ::= { sapL3LoopbackEntry 1 }

sapL3LoopbackIgnrPortOpState     OBJECT-TYPE
    SYNTAX      ServiceOperStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object specifies the operational state of the ignore
         sap port state operation."
    ::= { sapL3LoopbackEntry 2 }

sapL2tpv3TableLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object sapL2tpv3TableLastChanged indicates the value
         of sysUpTime at the time of the last modification of an conceptual row
         in the sapL2tpv3Table."
    ::= { tmnxSapObjs 173 }

sapL2tpv3Table                   OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapL2tpv3Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains SAP L2TPV3 information.

         Entries in this table can be created or deleted via SNMP operations."
    ::= { tmnxSapObjs 174 }

sapL2tpv3Entry                   OBJECT-TYPE
    SYNTAX      SapL2tpv3Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "SAP L2TPV3 specific information."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { sapL2tpv3Table 1 }

SapL2tpv3Entry                   ::= SEQUENCE
{
    sapL2tpv3RowStatus               RowStatus,
    sapL2tpv3LastChanged             TimeStamp,
    sapL2tpv3ServiceId               TmnxServId,
    sapL2tpv3RouterId                TmnxVRtrIDOrZero,
    sapL2tpv3TunnelGroupName         TmnxL2tpTunnelGroupNameOrEmpty,
    sapL2tpv3VcId                    TmnxVcIdOrNone,
    sapL2tpv3PwType                  INTEGER,
    sapL2tpv3AdminState              TmnxAdminState,
    sapL2tpv3OperState               ServiceOperStatus,
    sapL2tpv3TunnelStatus            INTEGER,
    sapL2tpv3OperFlags               BITS,
    sapL2tpv3LastOperChgd            TimeStamp,
    sapL2tpv3HostISA                 TmnxHwIndexOrZero,
    sapL2tpv3EthVlanQtag             QTagFullRangeOrNone,
    sapL2tpv3ServiceName             TLNamedItemOrEmpty
}

sapL2tpv3RowStatus               OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapL2tpv3RowStatus specifies the row status of this row."
    ::= { sapL2tpv3Entry 1 }

sapL2tpv3LastChanged             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapL2tpv3LastChanged indicates the sysUpTime at the time
         of the most recent management-initiated change to this conceptual row."
    ::= { sapL2tpv3Entry 2 }

sapL2tpv3ServiceId               OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3ServiceId specifies the routing context which provides
         reachability to the L2TPV3 tunnel group configured in the
         sapL2tpv3TunnelGroupName objects.

         While sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId are
         set to default, L2TPV3 tunnels will fail to come up.

         Only one of sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId
         may be set to non-default."
    DEFVAL      { 0 }
    ::= { sapL2tpv3Entry 3 }

sapL2tpv3RouterId                OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3RouterId specifies the routing context that provides
         reachability to the L2TPV3 tunnel group configured in the
         sapL2tpv3TunnelGroupName object.


         While sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId are
         set to default, L2TPV3 tunnels will fail to come up.

         Only one of sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId
         may be set to non-default."
    DEFVAL      { 0 }
    ::= { sapL2tpv3Entry 4 }

sapL2tpv3TunnelGroupName         OBJECT-TYPE
    SYNTAX      TmnxL2tpTunnelGroupNameOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapL2tpv3TunnelGroupName specifies the L2TP tunnel-group
         name associated with this L2TPV3 entry."
    DEFVAL      { ''H }
    ::= { sapL2tpv3Entry 5 }

sapL2tpv3VcId                    OBJECT-TYPE
    SYNTAX      TmnxVcIdOrNone
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapL2tpv3VcId specifies the virtual circuit identifier
         associated with this L2TPV3 entry."
    DEFVAL      { 0 }
    ::= { sapL2tpv3Entry 6 }

sapL2tpv3PwType                  OBJECT-TYPE
    SYNTAX      INTEGER {
        none     (0),
        ethernet (1),
        ethVlan  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3PwType specifies the pseudo-wire type associated with
         this L2TPV3 entry."
    DEFVAL      { none }
    ::= { sapL2tpv3Entry 7 }

sapL2tpv3AdminState              OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3AdminState specifies the adminstrative state of this
         entry."
    DEFVAL      { outOfService }
    ::= { sapL2tpv3Entry 8 }

sapL2tpv3OperState               OBJECT-TYPE
    SYNTAX      ServiceOperStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3OperState indicates the operational status of this entry."
    ::= { sapL2tpv3Entry 9 }

sapL2tpv3TunnelStatus            OBJECT-TYPE
    SYNTAX      INTEGER {
        down       (1),
        inprogress (2),
        connected  (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3TunnelStatus indicates the state of the L2tpv3 tunnel."
    ::= { sapL2tpv3Entry 10 }

sapL2tpv3OperFlags               OBJECT-TYPE
    SYNTAX      BITS {
        sapDown           (0),
        routerUnreachable (1),
        adminDown         (2),
        tunnelNotUnique   (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3OperFlags indicates the reason why the L2tpv3 tunnel is
         operationally down."
    ::= { sapL2tpv3Entry 11 }

sapL2tpv3LastOperChgd            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3LastOperChgd indicates the sysUpTime at the time of the
         last operational status change of this entry."
    ::= { sapL2tpv3Entry 12 }

sapL2tpv3HostISA                 OBJECT-TYPE
    SYNTAX      TmnxHwIndexOrZero
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The sapL2tpv3HostISA indicates the active ISA that is being used to
         host this L2tpv3 tunnel.

         This object will have a value of zero when this tunnel is
         operationally down."
    ::= { sapL2tpv3Entry 13 }

sapL2tpv3EthVlanQtag             OBJECT-TYPE
    SYNTAX      QTagFullRangeOrNone
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3EthVlanQtag specifies the qtag id associated to the
         ethernet vlan pseudo-wire type."
    DEFVAL      { -1 }
    ::= { sapL2tpv3Entry 14 }

sapL2tpv3ServiceName             OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sapL2tpv3ServiceName specifies the routing context which provides
         reachability to the L2TPV3 tunnel group configured in the
         sapL2tpv3TunnelGroupName objects.


         While sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId are
         set to default, L2TPV3 tunnels will fail to come up.

         Only one of sapL2tpv3ServiceId/sapL2tpv3ServiceName/sapL2tpv3RouterId
         may be set to non-default."
    DEFVAL      { ''H }
    ::= { sapL2tpv3Entry 15 }

sapEgrQosHsWrrGrpTblLastChanged  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpTblLastChanged indicates the sysUpTime
         at the time of the last modification of a row in
         sapEgrQosHsWrrGrpTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tmnxSapObjs 175 }

sapEgrQosHsWrrGrpTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF SapEgrQosHsWrrGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The sapEgrQosHsWrrGrpTable is used to override the HS WRR (Weighted
         Round Robin) group information, as defined in the associated HS WRR
         Group on sap-egress policies."
    ::= { tmnxSapObjs 176 }

sapEgrQosHsWrrGrpEntry           OBJECT-TYPE
    SYNTAX      SapEgrQosHsWrrGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entries of this table override the corresponding values defined for
         the specifies SAP of a particular HS WRR Group specified by
         sapEgrQosHsWrrGrpId."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        sapEgrQosHsWrrGrpId
    }
    ::= { sapEgrQosHsWrrGrpTable 1 }

SapEgrQosHsWrrGrpEntry           ::= SEQUENCE
{
    sapEgrQosHsWrrGrpId              Unsigned32,
    sapEgrQosHsWrrGrpRowStatus       RowStatus,
    sapEgrQosHsWrrGrpLastChanged     TimeStamp,
    sapEgrQosHsWrrGrpRate            THPolPIRRateOverride,
    sapEgrQosHsWrrGrpRatePercent     TPIRPercentOverride,
    sapEgrQosHsWrrGrpClassWeight     Integer32
}

sapEgrQosHsWrrGrpId              OBJECT-TYPE
    SYNTAX      Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpId specifies the identifier of the HS
         WRR Group whose objects are to be overridden."
    ::= { sapEgrQosHsWrrGrpEntry 1 }

sapEgrQosHsWrrGrpRowStatus       OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpRowStatus controls the creation and
         deletion of rows in this table."
    ::= { sapEgrQosHsWrrGrpEntry 2 }

sapEgrQosHsWrrGrpLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpLastChanged indicates the value of
         sysUpTime at the time of the last management change of any writable
         object of this row."
    ::= { sapEgrQosHsWrrGrpEntry 3 }

sapEgrQosHsWrrGrpRate            OBJECT-TYPE
    SYNTAX      THPolPIRRateOverride
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpRate specifies the group rate.

         This object overrides TIMETRA-QOS-MIB::tSapEgressHsWrrGrpRate."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsWrrGrpEntry 4 }

sapEgrQosHsWrrGrpRatePercent     OBJECT-TYPE
    SYNTAX      TPIRPercentOverride
    UNITS       "centipercent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpRatePercent specifies the group rate
         percent.

         This object overrides TIMETRA-QOS-MIB::tSapEgressHsWrrGrpRatePercent."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsWrrGrpEntry 5 }

sapEgrQosHsWrrGrpClassWeight     OBJECT-TYPE
    SYNTAX      Integer32 (-2 | 1 | 2 | 4 | 8)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sapEgrQosHsWrrGrpClassWeight specifies the weight of
         scheduling class.

         This object overrides TIMETRA-QOS-MIB::tSapEgressHsWrrGrpClassWeight."
    DEFVAL      { -2 }
    ::= { sapEgrQosHsWrrGrpEntry 6 }

tmnxSapPfcpTableLastChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapPfcpTableLastChanged indicates the sysUpTime at
         the time of the most recent change to the tmnxSapPfcpTable."
    ::= { tmnxSapObjs 177 }

tmnxSapPfcpTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxSapPfcpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table tmnxSapPfcpTable  contains Packet Forwarding Control Plane information related
         to a SAP with a sapSubType value of 'capture'."
    ::= { tmnxSapObjs 178 }

tmnxSapPfcpEntry                 OBJECT-TYPE
    SYNTAX      TmnxSapPfcpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information related to PFCP for a SAP with a
         sapSubType value of 'capture'."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { tmnxSapPfcpTable 1 }

TmnxSapPfcpEntry                 ::= SEQUENCE
{
    tmnxSapPfcpLastChanged           TimeStamp,
    tmnxSapPfcpAssociation           TNamedItemOrEmpty,
    tmnxSapPfcpL2AccessIdAlias       DisplayString
}

tmnxSapPfcpLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapPfcpLastChanged indicates the sysUpTime at the
         time of the most recent change to this table row."
    ::= { tmnxSapPfcpEntry 1 }

tmnxSapPfcpAssociation           OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapPfcpAssociation specifies the PFCP association for
         this SAP.

         A non-empty value must correspond to a conceptual row in the
         TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxPfcpAssocTable."
    DEFVAL      { "" }
    ::= { tmnxSapPfcpEntry 3 }

tmnxSapPfcpL2AccessIdAlias       OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapPfcpL2AccessIdAlias specifies the string to use as
         Layer-2-Access-Id for this SAP."
    DEFVAL      { "" }
    ::= { tmnxSapPfcpEntry 4 }

tmnxSapOperStatusTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxSapOperStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table tmnxSapOperStatusTable  contains operational state information of a SAP."
    ::= { tmnxSapObjs 179 }

tmnxSapOperStatusEntry           OBJECT-TYPE
    SYNTAX      TmnxSapOperStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents information related to operational state a
         SAP."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue
    }
    ::= { tmnxSapOperStatusTable 1 }

TmnxSapOperStatusEntry           ::= SEQUENCE
{
    tmnxSapOperStatus                INTEGER,
    tmnxSapOperFlags                 BITS
}

tmnxSapOperStatus                OBJECT-TYPE
    SYNTAX      INTEGER {
        up                 (1),
        down               (2),
        ingressQosMismatch (3),
        egressQosMismatch  (4),
        portMtuTooSmall    (5),
        svcAdminDown       (6),
        iesIfAdminDown     (7)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxSapOperStatus indicates the operating
         state of this SAP."
    ::= { tmnxSapOperStatusEntry 1 }

tmnxSapOperFlags                 OBJECT-TYPE
    SYNTAX      BITS {
        sapAdminDown              (0),
        svcAdminDown              (1),
        iesIfAdminDown            (2),
        portOperDown              (3),
        portMtuTooSmall           (4),
        l2OperDown                (5),
        ingressQosMismatch        (6),
        egressQosMismatch         (7),
        relearnLimitExceeded      (8),
        recProtSrcMac             (9),
        subIfAdminDown            (10),
        sapIpipeNoCeIpAddr        (11),
        reserved12                (12),
        reserved13                (13),
        sapParamMismatch          (14),
        sapCemNoEcidOrMacAddr     (15),
        sapStandbyForMcRing       (16),
        sapSvcMtuTooSmall         (17),
        ingressNamedPoolMismatch  (18),
        egressNamedPoolMismatch   (19),
        ipMirrorNoMacAddr         (20),
        sapEpipeNoRingNode        (21),
        mcStandby                 (22),
        mhStandby                 (23),
        oamDownMepFault           (24),
        oamUpMepFault             (25),
        ethTunTagMisconfig        (26),
        ingressPolicerMismatch    (27),
        egressPolicerMismatch     (28),
        sapTlsNoRingNode          (29),
        ethRingPathBlocked        (30),
        oamTunnelMepFault         (31),
        operGrpDown               (32),
        portBouncing              (33),
        sapEgressHQosMgmtMismatch (34),
        evpnP2mpConflict          (35),
        l2tpv3TunnelDown          (36),
        labelStackLimitExceeded   (37),
        sapIngQGrpRedirMismatch   (38),
        sapEgrQGrpRedirMismatch   (39)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates all the conditions that affect the operating
         status of this SAP.

         The bit values are:

         sapAdminDown                 (0)  - SAP is admin down.
         svcAdminDown                 (1)  - Service is admin down.
         iesIfAdminDown               (2)  - IP interface is admin down (IES and
                                             VPRN only).
         portOperDown                 (3)  - Access port is oper down.
         portMtuTooSmall              (4)  - Access port's MTU is < Service MTU
         l2OperDown                   (5)  - L2 PVC/PVP is oper down (FR and ATM
                                             only).
         ingressQosMismatch           (6)  - Mismatch between ingress QoS and
                                             Scheduler policies.
         egressQosMismatch            (7)  - Mismatch between egress QoS and
                                             Scheduler policies.
         relearnLimitExceeded         (8)  - MAC relearn limit was exceeded (TLS
                                             only).
         recProtSrcMac                (9)  - Received a packet with a protected
                                             source MAC (TLS only).
         subIfAdminDown               (10) - Subscriber interface is admin down
                                             (group-interface SAP only).
         sapIpipeNoCeIpAddr           (11) - CE IP Address not configured for Ipipe
                                             SAP (IPIPE SAP only).
         reserved12                   (12)
         reserved13                   (13)
         sapParamMismatch             (14) - Service specific local parameter
                                             mismatch.
         sapCemNoEcidOrMacAddr        (15) - ECID or MAC address not configured
                                             (CEM SAP only).
         sapStandbyForMcRing          (16) - mc-ring keeps this SAP standby for the
                                             corresponding SAP on peer.
         sapSvcMtuTooSmall            (17) - Service MTU is < SAP payload.
         ingressNamedPoolMismatch     (18)
                                           - Invalid named pool on the ingress
                                             side.
         egressNamedPoolMismatch      (19)
                                           - Invalid named pool on the egress side.
         ipMirrorNoMacAddr            (20) - No MAC Address configured for the
                                             IP mirror.
         sapEpipeNoRingNode           (21) - No TIMETRA-MC-REDUNDANCY-MIB
                                             ::tmnxMcEpipeSapEntry object
                                             configured for Epipe SAP (EPIPE SAP
                                             only).
         mcStandby                    (22) - indicates the SAP is standby because
                                             of a multi-chassis protocol.
         mhStandby                    (23) - indicates the SAP is standby because
                                             of a BGP multi-home protocol.
         oamDownMepFault              (24) - ETH-CFM down MEP fault detected.
         oamUpMepFault                (25) - ETH-CFM up MEP fault detected.
         ethTunTagMisconfig           (26) - Missing Eth-tunnel SAP tag(s).
         ingressPolicerMismatch       (27) - indicate ingress policer
                                             is parented to non-existent arbiter
         egressPolicerMismatch        (28) - indicate egress policer
                                             is parented to non-existent arbiter.
         sapTlsNoRingNode             (29) - No TIMETRA-MC-REDUNDANCY-MIB
                                             ::tmnxMcTlsSapEntry object
                                             configured for TLS SAP (VPLS SAP
                                             only).
         ethRingPathBlocked           (30) - indicates eth-ring path is
                                             blocked.
         oamTunnelMepFault            (31) - ETH-CFM Tunnel MEP fault detected.
         operGrpDown                  (32) - indicates operational-group is down.
         portBouncing                 (33) - indicates port is oper down and
                                             bouncing.
         sapEgressHQosMgmtMismatch    (34)
                                           - indicates the policer is in orphaned
                                             operational state as scheduler policy
                                             does not exist.
         evpnP2mpConflict             (35) - Conflict with evpn p2mp.
         l2tpv3TunnelDown             (36) - indicates l2tpv3 tunnel status.
         labelStackLimitExceeded      (37) - label stack overhead exceeding the
                                             egress IOM limitation.
         sapIngQGrpRedirMismatch      (38) - indicates an instance in the SAP's ingress
                                             QGrp redirect list is not present on the FP.
         sapEgrQGrpRedirMismatch      (39) - indicates an instance in the SAP's egress
                                             QGrp redirect list is not present on the port."
    ::= { tmnxSapOperStatusEntry 2 }

tmnxMgSapNotifyObjs              OBJECT IDENTIFIER ::= { tmnxSapObjs 181 }

tmnxIpTnlIPsecStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxIpTnlIPsecStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table to store IPsec statistics for Ip Tunnel"
    ::= { tmnxSapObjs 182 }

tmnxIpTnlIPsecStatsEntry         OBJECT-TYPE
    SYNTAX      TmnxIpTnlIPsecStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "IPsec Statistics for a single Ip Tunnel."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxIpTunnelName
    }
    ::= { tmnxIpTnlIPsecStatsTable 1 }

TmnxIpTnlIPsecStatsEntry         ::= SEQUENCE
{
    tmnxIpTnlIPsecIsakmpState        INTEGER,
    tmnxIpTnlIPsecIsakmpEstabTime    TimeStamp,
    tmnxIpTnlIPsecIsakmpNegLifeTime  Unsigned32,
    tmnxIpTnlIPsecNumDpdTx           Counter32,
    tmnxIpTnlIPsecNumDpdRx           Counter32,
    tmnxIpTnlIPsecNumDpdAckTx        Counter32,
    tmnxIpTnlIPsecNumDpdAckRx        Counter32,
    tmnxIpTnlIPsecNumExpRx           Counter32,
    tmnxIpTnlIPsecNumInvalidDpdRx    Counter32,
    tmnxIpTnlIPsecNumCtrlPktsTx      Counter32,
    tmnxIpTnlIPsecNumCtrlPktsRx      Counter32,
    tmnxIpTnlIPsecNumCtrlTxErrors    Counter32,
    tmnxIpTnlIPsecNumCtrlRxErrors    Counter32,
    tmnxIpTnlIPsecMatCertEntryId     Integer32,
    tmnxIpTnlIPsecCertProfName       TNamedItemOrEmpty,
    tmnxIpTnlIPsecIsakmpPathMtu      Unsigned32,
    tmnxIpTnlIPsecStatIsakmpAuthAlg  TmnxAuthAlgorithm,
    tmnxIpTnlIPsecStatIsakmpEncrAlg  TmnxEncrAlgorithm,
    tmnxIpTnlIPsecStatIsakmpPfsDhGp  TmnxIkePolicyDHGroupOrZero,
    tmnxIpTnlIPsecStatIkeTranPrfAlg  INTEGER,
    tmnxIpTnlIPsecMatchTrustAnchor   TNamedItemOrEmpty
}

tmnxIpTnlIPsecIsakmpState        OBJECT-TYPE
    SYNTAX      INTEGER {
        up   (1),
        down (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecIsakmpState indicates the state of phase 1
         IPsec negotiation."
    ::= { tmnxIpTnlIPsecStatsEntry 1 }

tmnxIpTnlIPsecIsakmpEstabTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecIsakmpEstabTime indicates the sysUpTime at
         the time the IPsec phase 1 negotiation completed."
    ::= { tmnxIpTnlIPsecStatsEntry 2 }

tmnxIpTnlIPsecIsakmpNegLifeTime  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecIsakmpNegLifeTime indicates the lifetime
         negotiated for phase1 IKE key."
    ::= { tmnxIpTnlIPsecStatsEntry 3 }

tmnxIpTnlIPsecNumDpdTx           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumDpdTx indicates the number of
         Dead-Peer-Detection packets transmitted."
    ::= { tmnxIpTnlIPsecStatsEntry 4 }

tmnxIpTnlIPsecNumDpdRx           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumDpdRx indicates the number of
         Dead-Peer-Detection packets received."
    ::= { tmnxIpTnlIPsecStatsEntry 5 }

tmnxIpTnlIPsecNumDpdAckTx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumDpdAckTx indicates the number of
         Dead-Peer-Detection acknowledgement packets transmitted."
    ::= { tmnxIpTnlIPsecStatsEntry 6 }

tmnxIpTnlIPsecNumDpdAckRx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumDpdAckRx indicates the number of
         Dead-Peer-Detection acknowledgement packets received."
    ::= { tmnxIpTnlIPsecStatsEntry 7 }

tmnxIpTnlIPsecNumExpRx           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumExpRx indicates the number of DPD
         R-U-THERE packets that have not been acknowledged."
    ::= { tmnxIpTnlIPsecStatsEntry 8 }

tmnxIpTnlIPsecNumInvalidDpdRx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumInvalidDpdRx indicates the number of
         malformed DPD R-U-THERE acknowledgement packets received."
    ::= { tmnxIpTnlIPsecStatsEntry 9 }

tmnxIpTnlIPsecNumCtrlPktsTx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumCtrlPktsTx indicates the number of
         control packets this IPsec Tunnel has sent."
    ::= { tmnxIpTnlIPsecStatsEntry 10 }

tmnxIpTnlIPsecNumCtrlPktsRx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumCtrlPktsRx indicates the number of
         control packets this IPsec Tunnel has received."
    ::= { tmnxIpTnlIPsecStatsEntry 11 }

tmnxIpTnlIPsecNumCtrlTxErrors    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumCtrlTxErrors indicates the number of
         control packet transmit errors."
    ::= { tmnxIpTnlIPsecStatsEntry 12 }

tmnxIpTnlIPsecNumCtrlRxErrors    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecNumCtrlRxErrors indicates the number of
         control packet receive errors."
    ::= { tmnxIpTnlIPsecStatsEntry 13 }

tmnxIpTnlIPsecMatCertEntryId     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecMatCertEntryId indicates the matching
         certificate profile entry id used for this tunnel."
    ::= { tmnxIpTnlIPsecStatsEntry 14 }

tmnxIpTnlIPsecCertProfName       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecCertProfName indicates a specific
         certificate profile name used for this tunnel."
    ::= { tmnxIpTnlIPsecStatsEntry 15 }

tmnxIpTnlIPsecIsakmpPathMtu      OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecIsakmpPathMtu indicates the path MTU used
         between the local and remote endpoints for this IPsec SA."
    ::= { tmnxIpTnlIPsecStatsEntry 16 }

tmnxIpTnlIPsecStatIsakmpAuthAlg  OBJECT-TYPE
    SYNTAX      TmnxAuthAlgorithm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecStatIsakmpAuthAlg indicates the
         authentication algorithm of the IPsec phase 1 negotiation for this
         IPsec tunnel."
    ::= { tmnxIpTnlIPsecStatsEntry 17 }

tmnxIpTnlIPsecStatIsakmpEncrAlg  OBJECT-TYPE
    SYNTAX      TmnxEncrAlgorithm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecStatIsakmpEncrAlg indicates the encryption
         algorithm of the IPsec phase 1 negotiation for this IPsec tunnel."
    ::= { tmnxIpTnlIPsecStatsEntry 18 }

tmnxIpTnlIPsecStatIsakmpPfsDhGp  OBJECT-TYPE
    SYNTAX      TmnxIkePolicyDHGroupOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecStatIsakmpPfsDhGp indicates the
         Diffie-Hellman (DH) group of the IPsec phase 1 negotiation for this
         IPsec tunnel.

         The Diffie-Hellman (DH) group is used by the IPsec tunnel to achieve
         Perfect Forward Secrecy (PFS)."
    ::= { tmnxIpTnlIPsecStatsEntry 19 }

tmnxIpTnlIPsecStatIkeTranPrfAlg  OBJECT-TYPE
    SYNTAX      INTEGER {
        md5        (2),
        sha1       (3),
        sha256     (4),
        sha384     (5),
        sha512     (6),
        aesXcbc    (7),
        sameAsAuth (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecStatIkeTranPrfAlg specifies the
         pseudo-random function (PRF)."
    ::= { tmnxIpTnlIPsecStatsEntry 20 }

tmnxIpTnlIPsecMatchTrustAnchor   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecMatchTrustAnchor indicates the name for
         matched Certificate-Authority Profile name associated with this SAP Ip
         tunnel certificate."
    ::= { tmnxIpTnlIPsecStatsEntry 21 }

tmnxIpTnlIPsecSATable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxIpTnlIPsecSAEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table to store the IPsec SA entries for Ip Tunnel."
    ::= { tmnxSapObjs 183 }

tmnxIpTnlIPsecSAEntry            OBJECT-TYPE
    SYNTAX      TmnxIpTnlIPsecSAEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a single IPsec SA entry."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxIpTunnelName,
        tmnxIpTnlIPsecSAId,
        tmnxIpTnlIPsecSADirection,
        tmnxIpTnlIPsecSAIndex
    }
    ::= { tmnxIpTnlIPsecSATable 1 }

TmnxIpTnlIPsecSAEntry            ::= SEQUENCE
{
    tmnxIpTnlIPsecSAId               Unsigned32,
    tmnxIpTnlIPsecSAIndex            Unsigned32,
    tmnxIpTnlIPsecSADirection        TmnxIPsecDirection,
    tmnxIpTnlIPsecSAType             TmnxIPsecKeyingType,
    tmnxIpTnlIPsecSASpi              Unsigned32,
    tmnxIpTnlIPsecSAAuthAlgorithm    TmnxAuthAlgorithm,
    tmnxIpTnlIPsecSAEncrAlgorithm    TmnxEncrAlgorithm,
    tmnxIpTnlIPsecSAEstablishedTime  TimeStamp,
    tmnxIpTnlIPsecSANegLifeTime      Unsigned32
}

tmnxIpTnlIPsecSAId               OBJECT-TYPE
    SYNTAX      Unsigned32 (1..16)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAId specifies the id of an SA entry and is
         part of the index for the tmnxIpTnlIPsecSATable."
    ::= { tmnxIpTnlIPsecSAEntry 1 }

tmnxIpTnlIPsecSAIndex            OBJECT-TYPE
    SYNTAX      Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAIndex specifies an additional index to
         uniquely identify the SA entry in the tmnxIpTnlIPsecSATable."
    ::= { tmnxIpTnlIPsecSAEntry 2 }

tmnxIpTnlIPsecSADirection        OBJECT-TYPE
    SYNTAX      TmnxIPsecDirection
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSADirection specifies the direction on the
         Ip tunnel to which this SA entry can be applied.  The value
         of tmnxIpTnlIPsecSADirection is also part of the index for the table
         tmnxIpTnlIPsecSATable"
    ::= { tmnxIpTnlIPsecSAEntry 3 }

tmnxIpTnlIPsecSAType             OBJECT-TYPE
    SYNTAX      TmnxIPsecKeyingType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAType indicates whether this SA entry is
         created manually by the user or dynamically by the IPsec subsystem."
    ::= { tmnxIpTnlIPsecSAEntry 4 }

tmnxIpTnlIPsecSASpi              OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSASpi specifies the SPI (Security Parameter
         Index) used to lookup the instruction to verify and decrypt the
         incoming IPsec packets when the value of tmnxIpTnlIPsecSADirection is
         'inbound'.

         The value of tmnxIpTnlIPsecSASpi specifies the SPI that will be used
         in the encoding of the outgoing packets when the value of
         tmnxIpTnlIPsecSADirection is 'outbound'.  The remote node can use this
         SPI to lookup the instruction to verify and decrypt the packet."
    ::= { tmnxIpTnlIPsecSAEntry 5 }

tmnxIpTnlIPsecSAAuthAlgorithm    OBJECT-TYPE
    SYNTAX      TmnxAuthAlgorithm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAAuthAlgorithm indicates the
         authentication algorithm used with this SA."
    ::= { tmnxIpTnlIPsecSAEntry 6 }

tmnxIpTnlIPsecSAEncrAlgorithm    OBJECT-TYPE
    SYNTAX      TmnxEncrAlgorithm
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAEncrAlgorithm indicates the encryption
         algorithm used with this SA."
    ::= { tmnxIpTnlIPsecSAEntry 7 }

tmnxIpTnlIPsecSAEstablishedTime  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAEstablishedTime indicates the sysUpTime
         at the time the IPsec phase 2 negotiation completed."
    ::= { tmnxIpTnlIPsecSAEntry 8 }

tmnxIpTnlIPsecSANegLifeTime      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSANegLifeTime indicates the lifetime
         negotiated for phase2 IKE key."
    ::= { tmnxIpTnlIPsecSAEntry 9 }

tmnxIpTnlIPsecSAStatsTable       OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxIpTnlIPsecSAStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table to retrieve the IPsec SA Statistics entries."
    ::= { tmnxSapObjs 184 }

tmnxIpTnlIPsecSAStatsEntry       OBJECT-TYPE
    SYNTAX      TmnxIpTnlIPsecSAStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a single IPsec SA Statistics entry."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxIpTunnelName,
        tmnxIpTnlIPsecSAId,
        tmnxIpTnlIPsecSADirection,
        tmnxIpTnlIPsecSAIndex
    }
    ::= { tmnxIpTnlIPsecSAStatsTable 1 }

TmnxIpTnlIPsecSAStatsEntry       ::= SEQUENCE
{
    tmnxIpTnlIPsecSAStBytesProcessed Counter64,
    tmnxIpTnlIPsecSAStBytesProcLow32 Counter32,
    tmnxIpTnlIPsecSAStBytesProcHgh32 Counter32,
    tmnxIpTnlIPsecSAStPktsProcessed  Counter64,
    tmnxIpTnlIPsecSAStPktsProcLow32  Counter32,
    tmnxIpTnlIPsecSAStPktsProcHigh32 Counter32,
    tmnxIpTnlIPsecSAStCryptoErrors   Counter32,
    tmnxIpTnlIPsecSAStReplayErrors   Counter32,
    tmnxIpTnlIPsecSAStSAErrors       Counter32,
    tmnxIpTnlIPsecSAStPolicyErrors   Counter32,
    tmnxIpTnlIPsecSAStEncapOverhead  Counter32,
    tmnxIpTnlIPsecSAStPfsDhGroup     TmnxIkePolicyDHGroupOrZero,
    tmnxIpTnlIPsecSAStESN            TruthValue
}

tmnxIpTnlIPsecSAStBytesProcessed OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStBytesProcessed indicates the number of
         bytes successfully processed for this SA."
    ::= { tmnxIpTnlIPsecSAStatsEntry 1 }

tmnxIpTnlIPsecSAStBytesProcLow32 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStBytesProcLow32 indicates the lower 32
         bits of the value of tmnxIpTnlIPsecSAStBytesProcessed."
    ::= { tmnxIpTnlIPsecSAStatsEntry 2 }

tmnxIpTnlIPsecSAStBytesProcHgh32 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStBytesProcHgh32 indicates the higher 32
         bits of the value of tmnxIpTnlIPsecSAStBytesProcessed."
    ::= { tmnxIpTnlIPsecSAStatsEntry 3 }

tmnxIpTnlIPsecSAStPktsProcessed  OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStPktsProcessed indicates the number of
         packets successfully processed for this SA."
    ::= { tmnxIpTnlIPsecSAStatsEntry 4 }

tmnxIpTnlIPsecSAStPktsProcLow32  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStPktsProcLow32 indicates the lower 32
         bits of the value of tmnxIpTnlIPsecSAStPktsProcessed."
    ::= { tmnxIpTnlIPsecSAStatsEntry 5 }

tmnxIpTnlIPsecSAStPktsProcHigh32 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStPktsProcHigh32 indicates the higher 32
         bits of the value of tmnxIpTnlIPsecSAStPktsProcessed."
    ::= { tmnxIpTnlIPsecSAStatsEntry 6 }

tmnxIpTnlIPsecSAStCryptoErrors   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStCryptoErrors indicates the number of
         crypto errors encountered on this SA.

         When the value of tmnxIpTnlIPsecSADirection is 'inbound (1)', the
         tmnxIpTnlIPsecSAStCryptoErrors will be set for the following errors:
             MAC miscompare
             Pad errors
             Illegal configure algorithm
             Illegal authentication algorithm
             Inner IP checksum errors
             Payload alignment errors
             Sequence number errors
             Protocol errors

         When the value of tmnxIpTnlIPsecSADirection is 'outbound (2)', the
         tmnxIpTnlIPsecSAStCryptoErrors will be set for the following errors:
             Sequence wrap errors
             Illegal configure algorithm
             Illegal authentication algorithm
             Expanded packet too big
             TTL decrement errors"
    ::= { tmnxIpTnlIPsecSAStatsEntry 7 }

tmnxIpTnlIPsecSAStReplayErrors   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStReplayErrors indicates the number of
         replay errors encountered on this SA."
    ::= { tmnxIpTnlIPsecSAStatsEntry 8 }

tmnxIpTnlIPsecSAStSAErrors       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStSAErrors indicates the number of SA
         errors encountered on this SA. The SA errors means ISA tried to use a
         CHILD SA that is marked for deletion."
    ::= { tmnxIpTnlIPsecSAStatsEntry 9 }

tmnxIpTnlIPsecSAStPolicyErrors   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStPolicyErrors indicates the number
         of policy errors encountered on this SA.  The policy errors include
         bundled SA, selector check and policy direction error."
    ::= { tmnxIpTnlIPsecSAStatsEntry 10 }

tmnxIpTnlIPsecSAStEncapOverhead  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStEncapOverhead indicates the
         encapsulation overhead for this outbound SA. This value is only
         significant when the value of tmnxIpTnlIPsecSADirection is 'outbound'."
    ::= { tmnxIpTnlIPsecSAStatsEntry 11 }

tmnxIpTnlIPsecSAStPfsDhGroup     OBJECT-TYPE
    SYNTAX      TmnxIkePolicyDHGroupOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxIpTnlIPsecSAStPfsDhGroup indicates the Diffie-Hellman
         (DH) group used with this SA.

         The Diffie-Hellman (DH) group is used by the SA to achieve Perfect
         Forward Secrecy (PFS)."
    ::= { tmnxIpTnlIPsecSAStatsEntry 12 }

tmnxIpTnlIPsecSAStESN            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The 'true' value of tmnxIpTnlIPsecSAStESN indicates Extended Sequence
         Number is enabled for the associated SA."
    ::= { tmnxIpTnlIPsecSAStatsEntry 13 }

sapBaseTableLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapBaseTableLastChanged indicates the sysUpTime at the
         time of the most recent change to the sapBaseInfoTable."
    ::= { tmnxSapObjs 185 }

sapTlsTableLastChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sapTlsTableLastChanged indicates the sysUpTime at the
         time of the most recent change to the sapTlsInfoTable."
    ::= { tmnxSapObjs 186 }

tmnxSapSubMonOperGrpTableLastCh  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapSubMonOperGrpTableLastCh indicates the sysUpTime
         at the time of the most recent change to the
         tmnxSapSubMonOperGrpTable."
    ::= { tmnxSapObjs 187 }

tmnxSapSubMonOperGrpTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxSapSubMonOperGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxSapSubMonOperGrpTable contains objects to configure SAP
         multi-chassis redundancy monitor Operational-Groups."
    ::= { tmnxSapObjs 188 }

tmnxSapSubMonOperGrpEntry        OBJECT-TYPE
    SYNTAX      TmnxSapSubMonOperGrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents an Operational-Group associated with a
         capture SAP.

         Entries in this table can be created or deleted via SNMP operations in
         SAPs with a sapSubType value of 'capture'."
    INDEX       {
        svcId,
        sapPortId,
        sapEncapValue,
        IMPLIED svcOperGrpName
    }
    ::= { tmnxSapSubMonOperGrpTable 1 }

TmnxSapSubMonOperGrpEntry        ::= SEQUENCE
{
    tmnxSapSubMonOperGrpRowStatus    RowStatus,
    tmnxSapSubMonOperGrpLastCh       TimeStamp,
    tmnxSapSubMonOperGrpHlthDrop     Unsigned32,
    tmnxSapSubMonOperGrpActHlthDrop  Unsigned32
}

tmnxSapSubMonOperGrpRowStatus    OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapSubMonOperGrpRowStatus specifies the row status of
         this row."
    ::= { tmnxSapSubMonOperGrpEntry 1 }

tmnxSapSubMonOperGrpLastCh       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapSubMonOperGrpLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to this table row."
    ::= { tmnxSapSubMonOperGrpEntry 2 }

tmnxSapSubMonOperGrpHlthDrop     OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapSubMonOperGrpHlthDrop specifies the value by which
         the health is decremented whenever a member of the monitoring
         operational-group goes down."
    DEFVAL      { 1 }
    ::= { tmnxSapSubMonOperGrpEntry 3 }

tmnxSapSubMonOperGrpActHlthDrop  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxSapSubMonOperGrpActHlthDrop indicates the actual
         health drop."
    ::= { tmnxSapSubMonOperGrpEntry 4 }

tmnxSapConformance               OBJECT IDENTIFIER ::= { tmnxServConformance 3 }

tmnxSapCompliances               OBJECT IDENTIFIER ::= { tmnxSapConformance 1 }

tmnxSap7450V6v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV6v0Group,
            tmnxSapTlsV6v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapIppipeV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapNotificationObjV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapBsxV6v0Group
        }
    ::= { tmnxSapCompliances 100 }

tmnxSap7750V6v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV6v0Group,
            tmnxSapTlsV6v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapIppipeV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapNotificationObjV6v0Group,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapBsxV6v0Group
        }
    ::= { tmnxSapCompliances 101 }

tmnxSap7710V6v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV6v0Group,
            tmnxSapTlsV6v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapIppipeV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapNotificationObjV6v0Group,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group
        }
    ::= { tmnxSapCompliances 102 }

tmnxSap7450V6v1Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV6v0Group,
            tmnxSapTlsV6v1Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapIppipeV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapNotificationObjV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapBsxV6v0Group
        }
    ::= { tmnxSapCompliances 103 }

tmnxSap7750V6v1Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV6v0Group,
            tmnxSapTlsV6v1Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapIppipeV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapNotificationObjV6v0Group,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapBsxV6v0Group
        }
    ::= { tmnxSapCompliances 104 }

tmnxSap7710V6v1Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV6v0Group,
            tmnxSapTlsV6v1Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapIppipeV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapNotifyGroup,
            tmnxSapNotificationObjV6v0Group,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group
        }
    ::= { tmnxSapCompliances 105 }

tmnxSap7450V7v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV7v0Group,
            tmnxSapTlsV6v1Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIpipeV7v0Group,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group
        }
    ::= { tmnxSapCompliances 106 }

tmnxSap7750V7v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV7v0Group,
            tmnxSapTlsV6v1Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapFrGroup,
            tmnxSapIpipeV7v0Group,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group
        }
    ::= { tmnxSapCompliances 107 }

tmnxSap7710V7v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV7v0Group,
            tmnxSapTlsV6v1Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV6v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV6v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV6v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV6v0Group,
            tmnxSapMrpV6v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapFrGroup,
            tmnxSapIpipeV7v0Group,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group
        }
    ::= { tmnxSapCompliances 108 }

tmnxSap7450V8v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems release 8.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV8v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup
        }
    ::= { tmnxSapCompliances 109 }

tmnxSap7750V8v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 8.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV8v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup
        }
    ::= { tmnxSapCompliances 110 }

tmnxSap7710V8v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems release 8.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapStaticHostV6v1Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV8v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group
        }
    ::= { tmnxSapCompliances 111 }

tmnxSap7450V9v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems release 9.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup
        }
    ::= { tmnxSapCompliances 112 }

tmnxSap7750V9v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 9.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapEgrEncapGrpV9v0Group,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup
        }
    ::= { tmnxSapCompliances 113 }

tmnxSap7710V9v0Compliance        MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems release 9.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmGroup,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup
        }
    ::= { tmnxSapCompliances 114 }

tmnxSap7450V10v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems release 10.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapV10v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapGreV10v0Group,
            tmnxSapSpbGroup,
            tmnxSapIpTnlGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapStatsV10v0Group,
            tmnxSapMonitorIPGroup,
            tmnxIpTnlOperChgGroup
        }
    ::= { tmnxSapCompliances 115 }

tmnxSap7750V10v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 10.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapV10v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV6v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapEgrEncapGrpV9v0Group,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapGreV10v0Group,
            tmnxSapSpbGroup,
            tmnxSapIpTnlGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapStatsV10v0Group,
            tmnxSapMonitorIPGroup,
            tmnxIpTnlOperChgGroup
        }
    ::= { tmnxSapCompliances 116 }

tmnxSap7710V10v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems release 10.0 ."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapV10v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapQosV8v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreGroup,
            tmnxSapMvrpV8v0Group,
            tmnxSapNotificationV8v0Group,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmGroup,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapGreV10v0Group,
            tmnxSapNotificationV10v0Group,
            tmnxSapStatsV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxIpTnlOperChgGroup
        }
    ::= { tmnxSapCompliances 117 }

tmnxSap7450V11v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems release 11.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapMvrpV10v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            tmnxSapQosV11v0Group,
            tmnxIpTnlOperChgGroup
        }
    ::= { tmnxSapCompliances 118 }

tmnxSap7750V11v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 11.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapMvrpV10v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapEgrEncapGrpV9v0Group,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            tmnxSapQosV11v0Group,
            tmnxIpTnlOperChgGroup
        }
    ::= { tmnxSapCompliances 119 }

tmnxSap7710V11v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems release 11.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapMvrpV10v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapLagV11v0Group,
            tmnxSapV11v0Group,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            tmnxSapQosV11v0Group,
            tmnxIpTnlOperChgGroup
        }
    ::= { tmnxSapCompliances 120 }

tmnxSap7450V12v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems release 12.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapMvrpV10v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapQosV11v0Group,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group
        }
    ::= { tmnxSapCompliances 121 }

tmnxSap7750V12v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 12.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapMvrpV10v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapEgrEncapGrpV9v0Group,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapQosV11v0Group,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group
        }
    ::= { tmnxSapCompliances 122 }

tmnxSap7710V12v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems release 12.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV8v0Group,
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapMvrpV10v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapLagV11v0Group,
            tmnxSapV11v0Group,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxSapQosV11v0Group,
            tmnxSapQosV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group
        }
    ::= { tmnxSapCompliances 123 }

tmnxSap7450V13v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7450
         ESS series systems release 13.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapQosV11v0Group,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapQosSchedV13v0Group,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapV13v0Group,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxEvpnMplsMacMovNotifGroup
        }
    ::= { tmnxSapCompliances 124 }

tmnxSap7750V13v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 13.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapQosV11v0Group,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapQosSchedV13v0Group,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapV13v0Group,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxEvpnMplsMacMovNotifGroup
        }
    ::= { tmnxSapCompliances 125 }

tmnxSap7710V13v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia 7710
         SR series systems release 13.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapPolicyV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapIpV6FilterV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapOverrideV8v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapLagV11v0Group,
            tmnxSapV11v0Group,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxSapQosV11v0Group,
            tmnxSapQosV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapV13v0Group,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxEvpnMplsMacMovNotifGroup
        }
    ::= { tmnxSapCompliances 126 }

tmnxSap7xxxV14v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 14.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapTlsV8v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV8v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV14v0Group,
            tmnxSapQosV14v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V14v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup
        }
    ::= { tmnxSapCompliances 128 }

tmnxSap7xxxV15v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 15.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV14v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V14v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup,
            tmnxSapCfmLmmPerQosV15v0Group,
            tmnxSapQosQDropTailGroup,
            tmnxSapQosV15v0Group,
            tmnxSapEsmMacV15v0Group,
            tmnxSapQosRateGroup,
            tmnxSapQosHsQOvrGroup,
            tSapQosQGrpIngRedirectListGroup,
            tSapQosQGrpEgrRedirectListGroup,
            tmnxDDosDCpuProtPolicyGrp,
            tSapIpTnlTcpMssAdjustV15v0Grp,
            tmnxSapTlsV15v0Group,
            tmnxSapMsapV15v0Group,
            tmnxSapPlcrV15v0Group,
            tmnxSapQosHsWrrGrpOvrGroup,
            sapEvpnMhEthSegV15v0Group,
            tmnxSapQosQBurstLimitOvrGrp
        }
    ::= { tmnxSapCompliances 129 }

tmnxSap7xxxV16v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 16.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV14v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V16v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup,
            tmnxSapCfmLmmPerQosV15v0Group,
            tmnxSapQosQDropTailGroup,
            tmnxSapQosV15v0Group,
            tmnxSapEsmMacV15v0Group,
            tmnxSapQosRateGroup,
            tmnxSapQosHsQOvrGroup,
            tSapQosQGrpIngRedirectListGroup,
            tSapQosQGrpEgrRedirectListGroup,
            tmnxDDosDCpuProtPolicyGrp,
            tSapIpTnlTcpMssAdjustV15v0Grp,
            tmnxSapTlsV15v0Group,
            tmnxSapMsapV15v0Group,
            tmnxSapQosHsWrrGrpOvrGroup,
            sapEvpnMhEthSegV15v0Group,
            tmnxSapQosQBurstLimitOvrGrp,
            tmnxSapQosPlcrOvrV15v1Group,
            sapPppoeRedirectGroup,
            tmnxSapTemplateQosV16v0Group,
            tmnxIpTunnelV16v0Group,
            tmnxSapTmplFilterNameV16v0Group,
            tmnxSapL2tpv3ExtGroup,
            tmnxSapIngressQinqV16v0Group,
            tmnxSapBaseStatsAggregateGroup,
            sapNotifyObjsPortStateGroup
        }
    ::= { tmnxSapCompliances 130 }

tmnxSap7xxxV15v1Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 15.1."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV14v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V14v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup,
            tmnxSapCfmLmmPerQosV15v0Group,
            tmnxSapQosQDropTailGroup,
            tmnxSapQosV15v0Group,
            tmnxSapEsmMacV15v0Group,
            tmnxSapQosRateGroup,
            tmnxSapQosHsQOvrGroup,
            tSapQosQGrpIngRedirectListGroup,
            tSapQosQGrpEgrRedirectListGroup,
            tmnxDDosDCpuProtPolicyGrp,
            tSapIpTnlTcpMssAdjustV15v0Grp,
            tmnxSapTlsV15v0Group,
            tmnxSapMsapV15v0Group,
            tmnxSapQosHsWrrGrpOvrGroup,
            sapEvpnMhEthSegV15v0Group,
            tmnxSapQosQBurstLimitOvrGrp,
            tmnxSapQosPlcrOvrV15v1Group
        }
    ::= { tmnxSapCompliances 131 }

tmnxSap7xxxV19v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 19.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapHsmdaV9v0Group,
            tmnxSapHsmdaV10v0Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapQueueOvrV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV19v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V16v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup,
            tmnxSapCfmLmmPerQosV15v0Group,
            tmnxSapQosQDropTailGroup,
            tmnxSapQosV15v0Group,
            tmnxSapEsmMacV15v0Group,
            tmnxSapQosRateGroup,
            tmnxSapQosHsQOvrGroup,
            tSapQosQGrpIngRedirectListGroup,
            tSapQosQGrpEgrRedirectListGroup,
            tmnxDDosDCpuProtPolicyGrp,
            tSapIpTnlTcpMssAdjustV15v0Grp,
            tmnxSapTlsV15v0Group,
            tmnxSapMsapV15v0Group,
            tmnxSapQosHsWrrGrpOvrGroup,
            sapEvpnMhEthSegV15v0Group,
            tmnxSapQosQBurstLimitOvrGrp,
            tmnxSapQosPlcrOvrV15v1Group,
            sapPppoeRedirectGroup,
            tmnxSapTemplateQosV16v0Group,
            tmnxIpTunnelV16v0Group,
            tmnxSapTmplFilterNameV16v0Group,
            tmnxSapL2tpv3ExtGroup,
            tmnxSapIngressQinqV16v0Group,
            tmnxSapPfcpV19v0Group,
            tmnxSapBaseStatsAggregateGroup,
            tmnxSapOperStatusGroup,
            tmnxSapBWGroup,
            tmnxSapQtagV19v0Group,
            tmnxSapVlanQosPlcyV19v0Group,
            tmnxSapEgrAggRateCIRV19v0Group,
            tmnxSapIgPlcyPlcerStatV19v0Group,
            tmnxSapIngressAggRateV19v0Group,
            tmnxIpTunnelEsaVmV19v0Group,
            sapNotifyObjsPortStateGroup,
            tmnxSapQosStatsV19v0Group
        }
    ::= { tmnxSapCompliances 132 }

tmnxSap7xxxV20v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 20.0."
    MODULE
        MANDATORY-GROUPS {
            sapNotifyV20v0Group,
            sapTlsMacListV20v0Group,
            sapTlsBgpVplsEvpnV20v0Group,
            tmnxSapStickyMsapV20v0Group,
            tmnxSapEgrQMonQDepthV20v0Group,
            sapIngTrtcm2AggRateV20v10Group,
            sapIngressIPCritOvrV20v10Group
        }
    ::= { tmnxSapCompliances 133 }

tmnxSap7xxxV21v0Compliance       MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 21.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV19v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V16v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup,
            tmnxSapCfmLmmPerQosV15v0Group,
            tmnxSapQosQDropTailGroup,
            tmnxSapQosV15v0Group,
            tmnxSapEsmMacV15v0Group,
            tmnxSapQosRateGroup,
            tmnxSapQosHsQOvrGroup,
            tSapQosQGrpIngRedirectListGroup,
            tSapQosQGrpEgrRedirectListGroup,
            tmnxDDosDCpuProtPolicyGrp,
            tSapIpTnlTcpMssAdjustV15v0Grp,
            tmnxSapTlsV15v0Group,
            tmnxSapMsapV15v0Group,
            tmnxSapQosHsWrrGrpOvrGroup,
            sapEvpnMhEthSegV15v0Group,
            tmnxSapQosQBurstLimitOvrGrp,
            tmnxSapQosPlcrOvrV15v1Group,
            sapPppoeRedirectGroup,
            tmnxSapTemplateQosV16v0Group,
            tmnxIpTunnelV16v0Group,
            tmnxSapTmplFilterNameV16v0Group,
            tmnxSapL2tpv3ExtGroup,
            tmnxSapIngressQinqV16v0Group,
            tmnxSapPfcpV19v0Group,
            tmnxSapBaseStatsAggregateGroup,
            tmnxSapOperStatusGroup,
            tmnxSapBWGroup,
            tmnxSapQtagV19v0Group,
            tmnxSapVlanQosPlcyV19v0Group,
            tmnxSapEgrAggRateCIRV19v0Group,
            tmnxSapIgPlcyPlcerStatV19v0Group,
            tmnxSapIngressAggRateV19v0Group,
            tmnxIpTunnelEsaVmV19v0Group,
            sapNotifyObjsPortStateGroup,
            tmnxSapQosStatsV19v0Group,
            sapNotifyV20v0Group,
            sapTlsMacListV20v0Group,
            sapTlsBgpVplsEvpnV20v0Group,
            tmnxSapStickyMsapV20v0Group,
            tmnxSapEgrQMonQDepthV20v0Group,
            sapIngTrtcm2AggRateV20v10Group,
            sapIngressIPCritOvrV20v10Group,
            tmnxIpTnlTransProfV21v0Group,
            sapCfmSquelchInCtagGroup,
            tmnxIPTunnelPMTUV21v0Group,
            tmnxSapIngQMonQDepthV21v0Group,
            sapLastChangeV21v0Group,
            tmnxSapEgressHQosV21v0Group,
            tmnxSapSubV21v0Group,
            sapIPFilterPairV22v0Group,
            tmnxSapQueueOvrV22v0Group
        }
    ::= { tmnxSapCompliances 134 }

tmnxSapV22v0Compliance           MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of services SAPs on Nokia SROS
         series systems release 22."
    MODULE
        MANDATORY-GROUPS {
            tmnxSapV9v0Group,
            tmnxSapBaseV6v0Group,
            tmnxSapAtmV6v0Group,
            tmnxSapAtmV9v0Group,
            tmnxSapStaticHostV9v0Group,
            tmnxSapStaticHostV11v0Group,
            tmnxSapPortIdV6v0Group,
            tmnxSapSubMgmtV9v0Group,
            tmnxSapMstiV6v0Group,
            tmnxSapL2ptV6v0Group,
            tmnxSapMsapV11v0Group,
            tmnxSapMsapV9v0Group,
            tmnxSapMsapV6v1Group,
            tmnxSapNotifyGroup,
            tmnxSapCemNotificationV6v0Group,
            tmnxTlsMsapPppoeV6v0Group,
            tmnxSapCemV6v0Group,
            tmnxSapDhcpV8v0Group,
            tmnxSapDhcpV11v0Group,
            tmnxSapMrpV8v0Group,
            tmnxSapBsxV7v0Group,
            tmnxSapBsxV9v0Group,
            tmnxSapBsxV10v0Group,
            tmnxSapArpHostGroup,
            tmnxSapIgmpTrkGroup,
            tmnxSapIgmpTrkV8v0Group,
            tmnxSapIgmpTrkV11v0Group,
            tmnxSapFrGroupV8v0,
            tmnxSapIpipeV8v0Group,
            tmnxSapRadiusFallbackGroup,
            tmnxSapPbbGroup,
            tmnxSapPbbV12v0Group,
            tmnxSapTlsV7v0Group,
            tmnxSapFPropBMacV8v0Group,
            tmnxSapPlcrV9v0Group,
            tmnxSapEthRingGroup,
            tmnxSapOverrideV8v0Group,
            tmnxSapOverrideV9v0Group,
            tmnxSapGreObsoletedGroup,
            tmnxSapGreV11v0Group,
            tmnxSapNotificationV11v0Group,
            tmnxSapNotifObsoletedGroup,
            tmnxSapMvrpNotificationV8v0Group,
            tmnxSapEthCfmMonitorGroup,
            tmnxSapEthCfmGroup,
            tmnxSapCflowdGroupV11v0,
            tmnxSapNotificationV9v0Group,
            tmnxSapDefHostV9v0Group,
            tmnxSapDefHostV14v0Group,
            tmnxSapFilterProfileV9v0Group,
            tmnxSapIpipeNotificationGroup,
            tmnxSapSpbGroup,
            tmnxSapNotificationV10v0Group,
            tmnxSapIpTnlGroup,
            tmnxSapV11v0Group,
            tmnxSapLagV11v0Group,
            tmnxSapMonitorIPGroup,
            tmnxSapStatsV10v0Group,
            tmnxSapFlowSPecV11v0Group,
            tmnxSapDCpuProtV11v0Group,
            tmnxSapDcpNotifyObjsV11v0Group,
            tmnxSapDcpNotifyV11v0Group,
            tmnxSapEgrPortQGrpV11v0Group,
            tmnxSapSpbV11v0Group,
            tmnxSapSchedulerRateV11v0Group,
            tmnxSapEthLoopbackV11v0Group,
            tmnxSapEthLpbkNotifyV11v0Group,
            sapTlsFdbMacStatsGroup,
            sapTlsEtreeGroup,
            tmnxSapTlsV12v0Group,
            tmnxMsapPlcyCpmProtV12v0Group,
            tmnxSapQosV12v0Group,
            tmnxSapEthCfmV12v0Group,
            tmnxIpTunnelV12v0Group,
            sapLagV12v0Group,
            tmnxIPTunnelGreKeyV12v0Group,
            tmnxIpTunnelFragStatV12v0Group,
            tmnxIpTunnelEncapNotifyGroup,
            tmnxIpTunnelEncaNotifyObjsGroup,
            tmnxIpTnlOperChgGroup,
            tmnxMsapQosV12v0Group,
            tmnxSapMsapV12v0Group,
            tmnxSapMsapV14v0Group,
            tmnxSapStatHost6Group,
            tmnxSapStatHost6V13v0Group,
            tmnxSapIpoeV13v0Group,
            tmnxSapDnGroup,
            tmnxSapQosSchedV13v0Group,
            tmnxSapIpipeFaultPropGroup,
            tmnxSapStaticHostRipV13v0Group,
            tmnxSapBaseStatsV13v0Group,
            tmnxSapDiamNasreqGroup,
            tmnxSapRipNotifyGroup,
            tmnxSapQosRateV13v0Group,
            tmnxSapNotificationV13v0Group,
            tmnxSapDhcpV13v0Group,
            tmnxSapShcvPolicyGroup,
            tmnxSapMvrpV13v0Group,
            tmnxSapEgrEncapGrpV13v0Group,
            sapBgpEvpnMplsMhGroup,
            tmnxSapV14v0Group,
            tmnxSapVplsV14v0Group,
            tmnxSapQosStatsGroup,
            tmnxSapStickyMsapGroup,
            tmnxSapInfoV19v0Group,
            tmnxSapIpV6FilterV14v0Group,
            tmnxEvpnMplsMacMovNotifGroup,
            sapEthLoopbackV14v0Group,
            tmnxSapTlsPbbV14v0Group,
            tmnxSapVprnLoopbackV14v0Group,
            tmnxSapL2tpv3V16v0Group,
            tmnxSapBgpEvpnAlmpGroup,
            sapL3LoopbackNotifGroup,
            sapV14v0NotifyObjsGroup,
            tmnxSapEgrQosStatsGroup,
            tmnxSapCfmLmmPerQosV15v0Group,
            tmnxSapQosQDropTailGroup,
            tmnxSapQosV15v0Group,
            tmnxSapEsmMacV15v0Group,
            tmnxSapQosRateGroup,
            tmnxSapQosHsQOvrGroup,
            tSapQosQGrpIngRedirectListGroup,
            tSapQosQGrpEgrRedirectListGroup,
            tmnxDDosDCpuProtPolicyGrp,
            tSapIpTnlTcpMssAdjustV15v0Grp,
            tmnxSapTlsV15v0Group,
            tmnxSapMsapV15v0Group,
            tmnxSapQosHsWrrGrpOvrGroup,
            sapEvpnMhEthSegV15v0Group,
            tmnxSapQosQBurstLimitOvrGrp,
            tmnxSapQosPlcrOvrV15v1Group,
            sapPppoeRedirectGroup,
            tmnxSapTemplateQosV16v0Group,
            tmnxIpTunnelV16v0Group,
            tmnxSapTmplFilterNameV16v0Group,
            tmnxSapL2tpv3ExtGroup,
            tmnxSapIngressQinqV16v0Group,
            tmnxSapPfcpV19v0Group,
            tmnxSapBaseStatsAggregateGroup,
            tmnxSapOperStatusGroup,
            tmnxSapBWGroup,
            tmnxSapQtagV19v0Group,
            tmnxSapVlanQosPlcyV19v0Group,
            tmnxSapEgrAggRateCIRV19v0Group,
            tmnxSapIgPlcyPlcerStatV19v0Group,
            tmnxSapIngressAggRateV19v0Group,
            tmnxIpTunnelEsaVmV19v0Group,
            sapNotifyObjsPortStateGroup,
            tmnxSapQosStatsV19v0Group,
            sapNotifyV20v0Group,
            sapTlsMacListV20v0Group,
            sapTlsBgpVplsEvpnV20v0Group,
            tmnxSapStickyMsapV20v0Group,
            tmnxSapEgrQMonQDepthV20v0Group,
            sapIngTrtcm2AggRateV20v10Group,
            sapIngressIPCritOvrV20v10Group,
            tmnxIpTnlTransProfV21v0Group,
            sapCfmSquelchInCtagGroup,
            tmnxIPTunnelPMTUV21v0Group,
            tmnxSapIngQMonQDepthV21v0Group,
            sapLastChangeV21v0Group,
            tmnxSapEgressHQosV21v0Group,
            tmnxSapSubV21v0Group,
            sapIPFilterPairV22v0Group,
            tmnxSapQueueOvrV22v0Group,
            tmnxSapStaticHostV22v0Group
        }
    ::= { tmnxSapCompliances 135 }

tmnxSapGroups                    OBJECT IDENTIFIER ::= { tmnxSapConformance 2 }

tmnxSapV6v0Group                 OBJECT-GROUP
    OBJECTS     {
        sapNumEntries,
        sapPortId,
        sapEncapValue,
        sapRowStatus,
        sapType,
        sapDescription,
        sapAdminStatus,
        sapOperStatus,
        sapIngressQosPolicyId,
        sapIngressMacFilterId,
        sapIngressIpFilterId,
        sapIngressVlanTranslationId,
        sapEgressQosPolicyId,
        sapEgressMacFilterId,
        sapEgressIpFilterId,
        sapMirrorStatus,
        sapIesIfIndex,
        sapLastMgmtChange,
        sapCollectAcctStats,
        sapAccountingPolicyId,
        sapVpnId,
        sapCustId,
        sapCustMultSvcSite,
        sapIngressQosSchedulerPolicy,
        sapEgressQosSchedulerPolicy,
        sapSplitHorizonGrp,
        sapIngressSharedQueuePolicy,
        sapIngressMatchQinQDot1PBits,
        sapOperFlags,
        sapLastStatusChange,
        sapAntiSpoofing,
        sapTodSuite,
        sapIngUseMultipointShared,
        sapEgressQinQMarkTopOnly,
        sapEgressAggRateLimit,
        sapEndPoint,
        sapIngressVlanTranslation,
        sapSubType,
        sapCpmProtPolicyId,
        sapCpmProtMonitorMac,
        sapEgressFrameBasedAccounting,
        sapEthernetLLFAdminStatus,
        sapEthernetLLFOperStatus,
        sapTlsMvplsRowStatus,
        sapAntiSpoofIpAddress,
        sapAntiSpoofMacAddress,
        sapEgressFrameBasedAccounting
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP general capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 100 }

tmnxSapTlsV6v0Group              OBJECT-GROUP
    OBJECTS     {
        sapTlsStpAdminStatus,
        sapTlsStpPriority,
        sapTlsStpPortNum,
        sapTlsStpPathCost,
        sapTlsStpRapidStart,
        sapTlsStpBpduEncap,
        sapTlsStpPortState,
        sapTlsStpDesignatedBridge,
        sapTlsStpDesignatedPort,
        sapTlsStpForwardTransitions,
        sapTlsStpInConfigBpdus,
        sapTlsStpInTcnBpdus,
        sapTlsStpInBadBpdus,
        sapTlsStpOutConfigBpdus,
        sapTlsStpOutTcnBpdus,
        sapTlsStpOperBpduEncap,
        sapTlsVpnId,
        sapTlsCustId,
        sapTlsMacAddressLimit,
        sapTlsNumMacAddresses,
        sapTlsNumStaticMacAddresses,
        sapTlsMacLearning,
        sapTlsMacAgeing,
        sapTlsStpOperEdge,
        sapTlsStpAdminPointToPoint,
        sapTlsStpPortRole,
        sapTlsStpAutoEdge,
        sapTlsStpOperProtocol,
        sapTlsStpInRstBpdus,
        sapTlsStpOutRstBpdus,
        sapTlsLimitMacMove,
        sapTlsMacPinning,
        sapTlsDiscardUnknownSource,
        sapTlsMvplsPruneState,
        sapTlsMvplsMgmtService,
        sapTlsMvplsMgmtPortId,
        sapTlsMvplsMgmtEncapValue,
        sapTlsArpReplyAgent,
        sapTlsStpException,
        sapTlsAuthenticationPolicy,
        sapTlsL2ptTermination,
        sapTlsBpduTranslation,
        sapTlsStpRootGuard,
        sapTlsStpInsideRegion,
        sapTlsEgressMcastGroup,
        sapTlsStpInMstBpdus,
        sapTlsStpOutMstBpdus,
        sapTlsRestProtSrcMac,
        sapTlsRestProtSrcMacAction,
        sapTlsRestUnprotDstMac,
        sapTlsStpRxdDesigBridge,
        sapTlsStpRootGuardViolation,
        sapTlsShcvAction,
        sapTlsShcvSrcIp,
        sapTlsShcvSrcMac,
        sapTlsShcvInterval,
        sapTlsMvplsMgmtMsti,
        sapTlsMacMoveNextUpTime,
        sapTlsMacMoveRateExcdLeft,
        sapTlsL2ptForceBoundary,
        sapTlsLimitMacMoveLevel,
        sapTlsBpduTransOper,
        sapTlsDefMsapPolicy,
        sapTlsL2ptProtocols,
        sapTlsL2ptForceProtocols,
        sapTlsDhcpMsapTrigger,
        sapTlsDhcpProxyLeaseTime,
        sapTlsDhcpRemoteId,
        sapTlsMrpJoinTime,
        sapTlsMrpLeaveTime,
        sapTlsMrpLeaveAllTime,
        sapTlsMrpPeriodicTime,
        sapTlsMrpPeriodicEnabled
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP TLS capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 101 }

tmnxSapAtmV6v0Group              OBJECT-GROUP
    OBJECTS     {
        sapAtmEncapsulation,
        sapAtmIngressTrafficDescIndex,
        sapAtmEgressTrafficDescIndex,
        sapAtmOamAlarmCellHandling,
        sapAtmOamTerminate,
        sapAtmOamPeriodicLoopback,
        sapAtmLLFAdminStatus,
        sapAtmLLFOperStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP ATM capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 102 }

tmnxSapBaseV6v0Group             OBJECT-GROUP
    OBJECTS     {
        sapBaseStatsIngressPchipDroppedPackets,
        sapBaseStatsIngressPchipDroppedOctets,
        sapBaseStatsIngressPchipOfferedHiPrioPackets,
        sapBaseStatsIngressPchipOfferedHiPrioOctets,
        sapBaseStatsIngressPchipOfferedLoPrioPackets,
        sapBaseStatsIngressPchipOfferedLoPrioOctets,
        sapBaseStatsIngressQchipDroppedHiPrioPackets,
        sapBaseStatsIngressQchipDroppedHiPrioOctets,
        sapBaseStatsIngressQchipDroppedLoPrioPackets,
        sapBaseStatsIngressQchipDroppedLoPrioOctets,
        sapBaseStatsIngressQchipForwardedInProfPackets,
        sapBaseStatsIngressQchipForwardedInProfOctets,
        sapBaseStatsIngressQchipForwardedOutProfPackets,
        sapBaseStatsIngressQchipForwardedOutProfOctets,
        sapBaseStatsEgressQchipDroppedInProfPackets,
        sapBaseStatsEgressQchipDroppedInProfOctets,
        sapBaseStatsEgressQchipDroppedOutProfPackets,
        sapBaseStatsEgressQchipDroppedOutProfOctets,
        sapBaseStatsEgressQchipForwardedInProfPackets,
        sapBaseStatsEgressQchipForwardedInProfOctets,
        sapBaseStatsEgressQchipForwardedOutProfPackets,
        sapBaseStatsEgressQchipForwardedOutProfOctets,
        sapBaseStatsCustId,
        sapBaseStatsIngressPchipOfferedUncoloredPackets,
        sapBaseStatsIngressPchipOfferedUncoloredOctets,
        sapBaseStatsAuthenticationPktsDiscarded,
        sapBaseStatsAuthenticationPktsSuccess,
        sapBaseStatsLastClearedTime
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Base capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 103 }

tmnxSapQosV6v0Group              OBJECT-GROUP
    OBJECTS     {
        sapIngQosQueueId,
        sapIngQosQueueStatsOfferedHiPrioPackets,
        sapIngQosQueueStatsDroppedHiPrioPackets,
        sapIngQosQueueStatsOfferedLoPrioPackets,
        sapIngQosQueueStatsDroppedLoPrioPackets,
        sapIngQosQueueStatsOfferedHiPrioOctets,
        sapIngQosQueueStatsDroppedHiPrioOctets,
        sapIngQosQueueStatsOfferedLoPrioOctets,
        sapIngQosQueueStatsDroppedLoPrioOctets,
        sapIngQosQueueStatsForwardedInProfPackets,
        sapIngQosQueueStatsForwardedOutProfPackets,
        sapIngQosQueueStatsForwardedInProfOctets,
        sapIngQosQueueStatsForwardedOutProfOctets,
        sapIngQosCustId,
        sapIngQosQueueStatsUncoloredPacketsOffered,
        sapIngQosQueueStatsUncoloredOctetsOffered,
        sapEgrQosQueueId,
        sapEgrQosQueueStatsForwardedInProfPackets,
        sapEgrQosQueueStatsDroppedInProfPackets,
        sapEgrQosQueueStatsForwardedOutProfPackets,
        sapEgrQosQueueStatsDroppedOutProfPackets,
        sapEgrQosQueueStatsForwardedInProfOctets,
        sapEgrQosQueueStatsDroppedInProfOctets,
        sapEgrQosQueueStatsForwardedOutProfOctets,
        sapEgrQosQueueStatsDroppedOutProfOctets,
        sapEgrQosCustId,
        sapIngQosSchedStatsForwardedPackets,
        sapIngQosSchedStatsForwardedOctets,
        sapIngQosSchedCustId,
        sapEgrQosSchedStatsForwardedPackets,
        sapEgrQosSchedStatsForwardedOctets,
        sapEgrQosSchedCustId,
        sapIngQosQRowStatus,
        sapIngQosQLastMgmtChange,
        sapIngQosQOverrideFlags,
        sapIngQosQCBS,
        sapIngQosQMBS,
        sapIngQosQHiPrioOnly,
        sapIngQosQCIRAdaptation,
        sapIngQosQPIRAdaptation,
        sapIngQosQAdminPIR,
        sapIngQosQAdminCIR,
        sapEgrQosQRowStatus,
        sapEgrQosQLastMgmtChange,
        sapEgrQosQOverrideFlags,
        sapEgrQosQCBS,
        sapEgrQosQMBS,
        sapEgrQosQHiPrioOnly,
        sapEgrQosQCIRAdaptation,
        sapEgrQosQPIRAdaptation,
        sapEgrQosQAdminPIR,
        sapEgrQosQAdminCIR,
        sapEgrQosQAvgOverhead,
        sapIngQosSRowStatus,
        sapIngQosSLastMgmtChange,
        sapIngQosSOverrideFlags,
        sapIngQosSPIR,
        sapIngQosSCIR,
        sapIngQosSSummedCIR,
        sapEgrQosSRowStatus,
        sapEgrQosSLastMgmtChange,
        sapEgrQosSOverrideFlags,
        sapEgrQosSPIR,
        sapEgrQosSCIR,
        sapEgrQosSSummedCIR
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 104 }

tmnxSapStaticHostV6v0Group       OBJECT-GROUP
    OBJECTS     {
        sapStaticHostRowStatus,
        sapStaticHostSubscrIdent,
        sapStaticHostSubProfile,
        sapStaticHostSlaProfile,
        sapStaticHostShcvOperState,
        sapStaticHostShcvChecks,
        sapStaticHostShcvReplies,
        sapStaticHostShcvReplyTime,
        sapStaticHostDynMacAddress,
        sapStaticHostRetailerSvcId,
        sapStaticHostRetailerIf,
        sapStaticHostFwdingState,
        sapStaticHostAncpString,
        sapStaticHostSubIdIsSapId,
        sapStaticHostIntermediateDestId
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP static host
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 105 }

tmnxSapDhcpV6v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcpAdminState,
        sapTlsDhcpDescription,
        sapTlsDhcpSnoop,
        sapTlsDhcpLeasePopulate,
        sapTlsDhcpOperLeasePopulate,
        sapTlsDhcpInfoAction,
        sapTlsDhcpCircuitId,
        sapTlsDhcpRemoteIdString,
        sapTlsDhcpProxyAdminState,
        sapTlsDhcpProxyServerAddr,
        sapTlsDhcpProxyLTRadiusOverride,
        sapTlsDhcpVendorIncludeOptions,
        sapTlsDhcpVendorOptionString,
        sapTlsDhcpStatsClntSnoopdPckts,
        sapTlsDhcpStatsSrvrSnoopdPckts,
        sapTlsDhcpStatsClntForwdPckts,
        sapTlsDhcpStatsSrvrForwdPckts,
        sapTlsDhcpStatsClntDropdPckts,
        sapTlsDhcpStatsSrvrDropdPckts,
        sapTlsDhcpStatsClntProxRadPckts,
        sapTlsDhcpStatsClntProxLSPckts,
        sapTlsDhcpStatsGenReleasePckts,
        sapTlsDhcpStatsGenForceRenPckts,
        sapDhcpOperLeasePopulate
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP TLS DHCP
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 106 }

tmnxSapPortIdV6v0Group           OBJECT-GROUP
    OBJECTS     {
        sapPortIdIngQosSchedFwdPkts,
        sapPortIdIngQosSchedFwdOctets,
        sapPortIdIngQosSchedCustId,
        sapPortIdEgrQosSchedFwdPkts,
        sapPortIdEgrQosSchedFwdOctets,
        sapPortIdEgrQosSchedCustId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Port ID capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 107 }

tmnxSapSubMgmtV6v0Group          OBJECT-GROUP
    OBJECTS     {
        sapSubMgmtAdminStatus,
        sapSubMgmtDefSubProfile,
        sapSubMgmtDefSlaProfile,
        sapSubMgmtSubIdentPolicy,
        sapSubMgmtSubscriberLimit,
        sapSubMgmtProfiledTrafficOnly,
        sapSubMgmtNonSubTrafficSubIdent,
        sapSubMgmtNonSubTrafficSubProf,
        sapSubMgmtNonSubTrafficSlaProf,
        sapSubMgmtMacDaHashing,
        sapSubMgmtDefSubIdent,
        sapSubMgmtDefSubIdentString
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Sub-management
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 108 }

tmnxSapMstiV6v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTlsMstiPriority,
        sapTlsMstiPathCost,
        sapTlsMstiLastMgmtChange,
        sapTlsMstiPortRole,
        sapTlsMstiPortState,
        sapTlsMstiDesignatedBridge,
        sapTlsMstiDesignatedPort
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS MSTI
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 109 }

tmnxSapIppipeV6v0Group           OBJECT-GROUP
    OBJECTS     {
        sapIpipeCeInetAddress,
        sapIpipeCeInetAddressType,
        sapIpipeMacRefreshInterval,
        sapIpipeMacAddress,
        sapIpipeArpedMacAddress,
        sapIpipeArpedMacAddressTimeout
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ipipe capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 110 }

tmnxSapPolicyV6v0Group           OBJECT-GROUP
    OBJECTS     {
        sapCurrentIngressIpFilterId,
        sapCurrentIngressMacFilterId,
        sapCurrentIngressQosPolicyId,
        sapCurrentIngressQosSchedPlcy,
        sapCurrentEgressIpFilterId,
        sapCurrentEgressMacFilterId,
        sapCurrentEgressQosPolicyId,
        sapCurrentEgressQosSchedPlcy,
        sapIntendedIngressIpFilterId,
        sapIntendedIngressMacFilterId,
        sapIntendedIngressQosPolicyId,
        sapIntendedIngressQosSchedPlcy,
        sapIntendedEgressIpFilterId,
        sapIntendedEgressMacFilterId,
        sapIntendedEgressQosPolicyId,
        sapIntendedEgressQosSchedPlcy,
        sapIgQosPlcyDroppedHiPrioPackets,
        sapIgQosPlcyDroppedHiPrioOctets,
        sapIgQosPlcyDroppedLoPrioPackets,
        sapIgQosPlcyDroppedLoPrioOctets,
        sapIgQosPlcyForwardedInProfPackets,
        sapIgQosPlcyForwardedInProfOctets,
        sapIgQosPlcyForwardedOutProfPackets,
        sapIgQosPlcyForwardedOutProfOctets,
        sapEgQosPlcyDroppedInProfPackets,
        sapEgQosPlcyDroppedInProfOctets,
        sapEgQosPlcyDroppedOutProfPackets,
        sapEgQosPlcyDroppedOutProfOctets,
        sapEgQosPlcyForwardedInProfPackets,
        sapEgQosPlcyForwardedInProfOctets,
        sapEgQosPlcyForwardedOutProfPackets,
        sapEgQosPlcyForwardedOutProfOctets,
        sapIgQosPlcyQueueStatsOfferedHiPrioPackets,
        sapIgQosPlcyQueueStatsDroppedHiPrioPackets,
        sapIgQosPlcyQueueStatsOfferedLoPrioPackets,
        sapIgQosPlcyQueueStatsDroppedLoPrioPackets,
        sapIgQosPlcyQueueStatsOfferedHiPrioOctets,
        sapIgQosPlcyQueueStatsDroppedHiPrioOctets,
        sapIgQosPlcyQueueStatsOfferedLoPrioOctets,
        sapIgQosPlcyQueueStatsDroppedLoPrioOctets,
        sapIgQosPlcyQueueStatsForwardedInProfPackets,
        sapIgQosPlcyQueueStatsForwardedOutProfPackets,
        sapIgQosPlcyQueueStatsForwardedInProfOctets,
        sapIgQosPlcyQueueStatsForwardedOutProfOctets,
        sapIgQosPlcyQueueCustId,
        sapIgQosPlcyQueueStatsUncoloredPacketsOffered,
        sapIgQosPlcyQueueStatsUncoloredOctetsOffered,
        sapEgQosPlcyQueueStatsForwardedInProfPackets,
        sapEgQosPlcyQueueStatsDroppedInProfPackets,
        sapEgQosPlcyQueueStatsForwardedOutProfPackets,
        sapEgQosPlcyQueueStatsDroppedOutProfPackets,
        sapEgQosPlcyQueueStatsForwardedInProfOctets,
        sapEgQosPlcyQueueStatsDroppedInProfOctets,
        sapEgQosPlcyQueueStatsForwardedOutProfOctets,
        sapEgQosPlcyQueueStatsDroppedOutProfOctets,
        sapEgQosPlcyQueueCustId,
        sapIngSchedPlcyStatsFwdPkt,
        sapIngSchedPlcyStatsFwdOct,
        sapEgrSchedPlcyStatsFwdPkt,
        sapEgrSchedPlcyStatsFwdOct,
        sapIngSchedPlcyPortStatsFwdPkt,
        sapIngSchedPlcyPortStatsFwdOct,
        sapEgrSchedPlcyPortStatsFwdPkt,
        sapEgrSchedPlcyPortStatsFwdOct
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP ingress/egress
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 111 }

tmnxSapCemV6v0Group              OBJECT-GROUP
    OBJECTS     {
        sapCemLastMgmtChange,
        sapCemEndpointType,
        sapCemBitrate,
        sapCemCasTrunkFraming,
        sapCemPayloadSize,
        sapCemJitterBuffer,
        sapCemUseRtpHeader,
        sapCemDifferential,
        sapCemTimestampFreq,
        sapCemReportAlarm,
        sapCemReportAlarmStatus,
        sapCemLocalEcid,
        sapCemRemoteMacAddr,
        sapCemRemoteEcid,
        sapCemJitterBufPackets,
        sapCemPlayoutBufPacketsThreshold,
        sapCemStatsIngressForwardedPkts,
        sapCemStatsIngressDroppedPkts,
        sapCemStatsEgressForwardedPkts,
        sapCemStatsEgressDroppedPkts,
        sapCemStatsEgressMissingPkts,
        sapCemStatsEgressPktsReOrder,
        sapCemStatsEgressJtrBfrUnderruns,
        sapCemStatsEgressJtrBfrOverruns,
        sapCemStatsEgressMisOrderDropped,
        sapCemStatsEgressMalformedPkts,
        sapCemStatsEgressLBitDropped,
        sapCemStatsEgressMultipleDropped,
        sapCemStatsEgressESs,
        sapCemStatsEgressSESs,
        sapCemStatsEgressUASs,
        sapCemStatsEgressFailureCounts,
        sapCemStatsEgressUnderrunCounts,
        sapCemStatsEgressOverrunCounts,
        sapCemStatsEgressJtrBfrDepth
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Cem capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 112 }

tmnxSapL2ptV6v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTlsL2ptStatsLastClearedTime,
        sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx,
        sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx,
        sapTlsL2ptStatsL2ptEncapStpRstBpdusRx,
        sapTlsL2ptStatsL2ptEncapStpRstBpdusTx,
        sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx,
        sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx,
        sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx,
        sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx,
        sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx,
        sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx,
        sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx,
        sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx,
        sapTlsL2ptStatsStpConfigBpdusRx,
        sapTlsL2ptStatsStpConfigBpdusTx,
        sapTlsL2ptStatsStpRstBpdusRx,
        sapTlsL2ptStatsStpRstBpdusTx,
        sapTlsL2ptStatsStpTcnBpdusRx,
        sapTlsL2ptStatsStpTcnBpdusTx,
        sapTlsL2ptStatsPvstConfigBpdusRx,
        sapTlsL2ptStatsPvstConfigBpdusTx,
        sapTlsL2ptStatsPvstRstBpdusRx,
        sapTlsL2ptStatsPvstRstBpdusTx,
        sapTlsL2ptStatsPvstTcnBpdusRx,
        sapTlsL2ptStatsPvstTcnBpdusTx,
        sapTlsL2ptStatsOtherBpdusRx,
        sapTlsL2ptStatsOtherBpdusTx,
        sapTlsL2ptStatsOtherL2ptBpdusRx,
        sapTlsL2ptStatsOtherL2ptBpdusTx,
        sapTlsL2ptStatsOtherInvalidBpdusRx,
        sapTlsL2ptStatsOtherInvalidBpdusTx,
        sapTlsL2ptStatsL2ptEncapCdpBpdusRx,
        sapTlsL2ptStatsL2ptEncapCdpBpdusTx,
        sapTlsL2ptStatsL2ptEncapVtpBpdusRx,
        sapTlsL2ptStatsL2ptEncapVtpBpdusTx,
        sapTlsL2ptStatsL2ptEncapDtpBpdusRx,
        sapTlsL2ptStatsL2ptEncapDtpBpdusTx,
        sapTlsL2ptStatsL2ptEncapPagpBpdusRx,
        sapTlsL2ptStatsL2ptEncapPagpBpdusTx,
        sapTlsL2ptStatsL2ptEncapUdldBpdusRx,
        sapTlsL2ptStatsL2ptEncapUdldBpdusTx,
        sapTlsL2ptStatsCdpBpdusRx,
        sapTlsL2ptStatsCdpBpdusTx,
        sapTlsL2ptStatsVtpBpdusRx,
        sapTlsL2ptStatsVtpBpdusTx,
        sapTlsL2ptStatsDtpBpdusRx,
        sapTlsL2ptStatsDtpBpdusTx,
        sapTlsL2ptStatsPagpBpdusRx,
        sapTlsL2ptStatsPagpBpdusTx,
        sapTlsL2ptStatsUdldBpdusRx,
        sapTlsL2ptStatsUdldBpdusTx
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS L2pt
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 113 }

tmnxSapMsapV6v0Group             OBJECT-GROUP
    OBJECTS     {
        msapPlcyRowStatus,
        msapPlcyLastChanged,
        msapPlcyDescription,
        msapPlcyCpmProtPolicyId,
        msapPlcyCpmProtMonitorMac,
        msapPlcySubMgmtDefSubId,
        msapPlcySubMgmtDefSubIdStr,
        msapPlcySubMgmtDefSubProfile,
        msapPlcySubMgmtDefSlaProfile,
        msapPlcySubMgmtSubIdPlcy,
        msapPlcySubMgmtSubscriberLimit,
        msapPlcySubMgmtProfiledTrafOnly,
        msapPlcySubMgmtNonSubTrafSubId,
        msapPlcySubMgmtNonSubTrafSubProf,
        msapPlcySubMgmtNonSubTrafSlaProf,
        msapPlcyAssociatedMsaps,
        msapTlsPlcyLastChanged,
        msapTlsPlcySplitHorizonGrp,
        msapTlsPlcyArpReplyAgent,
        msapTlsPlcySubMgmtMacDaHashing,
        msapTlsPlcyDhcpLeasePopulate,
        msapTlsPlcyDhcpPrxyAdminState,
        msapTlsPlcyDhcpPrxyServAddr,
        msapTlsPlcyDhcpPrxyServAddrType,
        msapTlsPlcyDhcpPrxyLTRadOverride,
        msapTlsPlcyDhcpInfoAction,
        msapTlsPlcyDhcpCircuitId,
        msapTlsPlcyDhcpRemoteId,
        msapTlsPlcyDhcpRemoteIdString,
        msapTlsPlcyDhcpVendorInclOpts,
        msapTlsPlcyDhcpVendorOptStr,
        msapTlsPlcyDhcpPrxyLeaseTime,
        msapTlsPlcyEgressMcastGroup,
        msapTlsPlcyIgmpSnpgImportPlcy,
        msapTlsPlcyIgmpSnpgFastLeave,
        msapTlsPlcyIgmpSnpgSendQueries,
        msapTlsPlcyIgmpSnpgGenQueryIntv,
        msapTlsPlcyIgmpSnpgQueryRespIntv,
        msapTlsPlcyIgmpSnpgRobustCount,
        msapTlsPlcyIgmpSnpgLastMembIntvl,
        msapTlsPlcyIgmpSnpgMaxNbrGrps,
        msapTlsPlcyIgmpSnpgMvrFromVplsId,
        msapTlsPlcyIgmpSnpgVersion,
        msapTlsPlcyIgmpSnpgMcacPlcyName,
        msapTlsPlcyIgmpSnpgMcacPrRsvMnBW,
        msapTlsPlcyIgmpSnpgMcacUncnstBW,
        msapIgmpSnpgMcacLevelRowStatus,
        msapIgmpSnpgMcacLevelLastChanged,
        msapIgmpSnpgMcacLevelBW,
        msapIgmpSnpgMcacLagRowStatus,
        msapIgmpSnpgMcacLagLastChanged,
        msapIgmpSnpgMcacLagLevel,
        msapInfoCreationSapPortEncapVal,
        msapInfoCreationPlcyName,
        msapInfoReEvalPolicy,
        msapInfoLastChanged,
        msapCaptureSapStatsPktsRecvd,
        msapCaptureSapStatsPktsRedirect,
        msapCaptureSapStatsPktsDropped,
        msapPlcyTblLastChgd,
        msapTlsPlcyTblLastChgd,
        msapIgmpSnpgMcacLvlTblLastChgd,
        msapIgmpSnpgMcacLagTblLastChgd,
        msapInfoTblLastChgd
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of managed SAP capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 114 }

tmnxSapMrpV6v0Group              OBJECT-GROUP
    OBJECTS     {
        sapTlsMrpRxPdus,
        sapTlsMrpDroppedPdus,
        sapTlsMrpTxPdus,
        sapTlsMrpRxNewEvent,
        sapTlsMrpRxJoinInEvent,
        sapTlsMrpRxInEvent,
        sapTlsMrpRxJoinEmptyEvent,
        sapTlsMrpRxEmptyEvent,
        sapTlsMrpRxLeaveEvent,
        sapTlsMrpTxNewEvent,
        sapTlsMrpTxJoinInEvent,
        sapTlsMrpTxInEvent,
        sapTlsMrpTxJoinEmptyEvent,
        sapTlsMrpTxEmptyEvent,
        sapTlsMrpTxLeaveEvent,
        sapTlsMmrpDeclared,
        sapTlsMmrpRegistered
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP MRP capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 115 }

tmnxSapHsmdaV6v0Group            OBJECT-GROUP
    OBJECTS     {
        sapIngressAggRateLimit,
        sapEgressHsmdaShaperOverride,
        sapIngressHsmdaPacketOffOvr,
        sapEgressHsmdaPacketOffOverride,
        sapIngQosHsmdaQueueRowStatus,
        sapIngQosHsmdaQueueLastChanged,
        sapIngQosHsmdaQueueAdminPIR,
        sapIngQosHsmdaQueueAdminCIR,
        sapIngQosHsmdaQueueSlopePolicy,
        sapEgrQosHsmdaQueueRowStatus,
        sapEgrQosHsmdaQueueLastChanged,
        sapEgrQosHsmdaQueueAdminPIR,
        sapEgrQosHsmdaQueueAdminCIR,
        sapEgrQosHsmdaQueueSlopePolicy,
        sapIngHsmdaQStatCustId,
        sapIngHsmdaQStatHiPktsDropped,
        sapIngHsmdaQStatLoPktsDropped,
        sapIngHsmdaQStatHiOctsDropped,
        sapIngHsmdaQStatLoOctsDropped,
        sapIngHsmdaQStatInProfPktsFwd,
        sapIngHsmdaQStatOutProfPktsFwd,
        sapIngHsmdaQStatInProfOctsFwd,
        sapIngHsmdaQStatOutProfOctsFwd,
        sapIngHsmdaQStatAllPktsOffered,
        sapIngHsmdaQStatAllOctsOffered,
        sapIngHsmdaCntrStCustId,
        sapIngHsmdaCntrStHiPktDrop,
        sapIngHsmdaCntrStLoPktDrop,
        sapIngHsmdaCntrStHiOctDrop,
        sapIngHsmdaCntrStLoOctDrop,
        sapIngHsmdaCntrStInProfPktFwd,
        sapIngHsmdaCntrStOutProfPktFwd,
        sapIngHsmdaCntrStInProfOctFwd,
        sapIngHsmdaCntrStOutProfOctFwd,
        sapIngHsmdaCntrStAllPktOffered,
        sapIngHsmdaCntrStAllOctOffered,
        sapEgrHsmdaQStatCustId,
        sapEgrHsmdaQStatInProfPktFwd,
        sapEgrHsmdaQStatInProfPktDropd,
        sapEgrHsmdaQStatOutProfPktFwd,
        sapEgrHsmdaQStatOutProfPktDropd,
        sapEgrHsmdaQStatInProfOctFwd,
        sapEgrHsmdaQStatInProfOctDropd,
        sapEgrHsmdaQStatOutProfOctFwd,
        sapEgrHsmdaQStatOutProfOctDropd,
        sapEgrHsmdaCntrStCustId,
        sapEgrHsmdaCntrStInProfPktFwd,
        sapEgrHsmdaCntrStInProfPktDrop,
        sapEgrHsmdaCntrStOutProfPktFwd,
        sapEgrHsmdaCntrStOutProfPktDrop,
        sapEgrHsmdaCntrStInProfOctFwd,
        sapEgrHsmdaCntrStInProfOctDrop,
        sapEgrHsmdaCntrStOutProfOctFwd,
        sapEgrHsmdaCntrStOutProfOctDrop
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         Hsmda capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 116 }

tmnxTlsMsapPppoeV6v0Group        OBJECT-GROUP
    OBJECTS     {
        sapTlsPppoeMsapTrigger
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting PPPOE on Managed SAPs feature on the
         Nokia SROS series systems."
    ::= { tmnxSapGroups 117 }

tmnxSapIpV6FilterV6v0Group       OBJECT-GROUP
    OBJECTS     {
        sapIngressIpv6FilterId,
        sapEgressIpv6FilterId,
        sapCurrentIngressIpv6FilterId,
        sapCurrentEgressIpv6FilterId,
        sapIntendedIngressIpv6FilterId,
        sapIntendedEgressIpv6FilterId
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress Policy
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 118 }

tmnxSapBsxV6v0Group              OBJECT-GROUP
    OBJECTS     {
        sapStaticHostAppProfile,
        sapSubMgmtDefAppProfile,
        sapSubMgmtNonSubTrafficAppProf,
        msapPlcySubMgmtDefAppProfile,
        msapPlcySubMgmtNonSubTrafAppProf
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of BSX (Application
         Assurance) capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 119 }

tmnxSapMsapV6v1Group             OBJECT-GROUP
    OBJECTS     {
        msapL3PlcyTblLastChgd,
        msapL3PlcyLastChanged,
        msapL3PlcyAntiSpoof
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of managed SAP L3
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 120 }

tmnxSapStaticHostV6v1Group       OBJECT-GROUP
    OBJECTS     {
        sapStaticHostRowStatus,
        sapStaticHostSubscrIdent,
        sapStaticHostSubProfile,
        sapStaticHostSlaProfile,
        sapStaticHostShcvOperState,
        sapStaticHostShcvChecks,
        sapStaticHostShcvReplies,
        sapStaticHostShcvReplyTime,
        sapStaticHostDynMacAddress,
        sapStaticHostRetailerSvcId,
        sapStaticHostRetailerIf,
        sapStaticHostFwdingState,
        sapStaticHostAncpString,
        sapStaticHostSubIdIsSapId,
        sapStaticHostIntermediateDestId,
        sapStaticHostAdminStatus,
        sapStaticHostMRtTblLastChgd,
        sapStaticHostMRtRowStatus,
        sapStaticHostMRtLastMgmtChange,
        sapStaticHostMRtStatus
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP static host
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 121 }

tmnxSapTlsV6v1Group              OBJECT-GROUP
    OBJECTS     {
        sapTlsStpAdminStatus,
        sapTlsStpPriority,
        sapTlsStpPortNum,
        sapTlsStpPathCost,
        sapTlsStpRapidStart,
        sapTlsStpBpduEncap,
        sapTlsStpPortState,
        sapTlsStpDesignatedBridge,
        sapTlsStpDesignatedPort,
        sapTlsStpForwardTransitions,
        sapTlsStpInConfigBpdus,
        sapTlsStpInTcnBpdus,
        sapTlsStpInBadBpdus,
        sapTlsStpOutConfigBpdus,
        sapTlsStpOutTcnBpdus,
        sapTlsStpOperBpduEncap,
        sapTlsVpnId,
        sapTlsCustId,
        sapTlsMacAddressLimit,
        sapTlsNumMacAddresses,
        sapTlsNumStaticMacAddresses,
        sapTlsMacLearning,
        sapTlsMacAgeing,
        sapTlsStpOperEdge,
        sapTlsStpAdminPointToPoint,
        sapTlsStpPortRole,
        sapTlsStpAutoEdge,
        sapTlsStpOperProtocol,
        sapTlsStpInRstBpdus,
        sapTlsStpOutRstBpdus,
        sapTlsLimitMacMove,
        sapTlsMacPinning,
        sapTlsDiscardUnknownSource,
        sapTlsMvplsPruneState,
        sapTlsMvplsMgmtService,
        sapTlsMvplsMgmtPortId,
        sapTlsMvplsMgmtEncapValue,
        sapTlsArpReplyAgent,
        sapTlsStpException,
        sapTlsAuthenticationPolicy,
        sapTlsL2ptTermination,
        sapTlsBpduTranslation,
        sapTlsStpRootGuard,
        sapTlsStpInsideRegion,
        sapTlsEgressMcastGroup,
        sapTlsStpInMstBpdus,
        sapTlsStpOutMstBpdus,
        sapTlsRestProtSrcMac,
        sapTlsRestProtSrcMacAction,
        sapTlsRestUnprotDstMac,
        sapTlsStpRxdDesigBridge,
        sapTlsStpRootGuardViolation,
        sapTlsShcvAction,
        sapTlsShcvSrcIp,
        sapTlsShcvSrcMac,
        sapTlsShcvInterval,
        sapTlsMvplsMgmtMsti,
        sapTlsMacMoveNextUpTime,
        sapTlsMacMoveRateExcdLeft,
        sapTlsL2ptForceBoundary,
        sapTlsLimitMacMoveLevel,
        sapTlsBpduTransOper,
        sapTlsDefMsapPolicy,
        sapTlsL2ptProtocols,
        sapTlsL2ptForceProtocols,
        sapTlsDhcpMsapTrigger,
        sapTlsDhcpProxyLeaseTime,
        sapTlsDhcpRemoteId,
        sapTlsMrpJoinTime,
        sapTlsMrpLeaveTime,
        sapTlsMrpLeaveAllTime,
        sapTlsMrpPeriodicTime,
        sapTlsMrpPeriodicEnabled,
        sapTlsPppoePolicy
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP TLS capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 122 }

tmnxSapArpHostGroup              OBJECT-GROUP
    OBJECTS     {
        sapTlsArpHostTableLastMgmtChange,
        sapTlsArpHostLastMgmtChange,
        sapTlsArpHostAdminState,
        sapTlsArpHostMaxNumHosts,
        sapTlsArpHostMinAuthIntvl,
        sapTlsArpMsapTrigger,
        msapTlsPlcyArpHostMaxNumHosts,
        msapTlsPlcyArpHostMinAuthIntvl,
        sapArpHostStatLastClearedTime,
        sapArpHostStatNumHosts,
        sapArpHostStatTriggersRx,
        sapArpHostStatTriggersIgnored,
        sapArpHostStatTrigIgnQFull,
        sapArpHostStatNumForcedVerif,
        sapArpHostStatNumCreated,
        sapArpHostStatNumDeleted,
        sapArpHostStatNumUpdated,
        sapArpHostStatNumAuthReq
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of ARP hosts' capabilities
         for SAPs on Nokia SROS series systems."
    ::= { tmnxSapGroups 123 }

tmnxSapV7v0Group                 OBJECT-GROUP
    OBJECTS     {
        sapNumEntries,
        sapPortId,
        sapEncapValue,
        sapRowStatus,
        sapType,
        sapDescription,
        sapAdminStatus,
        sapOperStatus,
        sapIngressQosPolicyId,
        sapIngressMacFilterId,
        sapIngressIpFilterId,
        sapIngressVlanTranslationId,
        sapEgressQosPolicyId,
        sapEgressMacFilterId,
        sapEgressIpFilterId,
        sapMirrorStatus,
        sapIesIfIndex,
        sapLastMgmtChange,
        sapCollectAcctStats,
        sapAccountingPolicyId,
        sapVpnId,
        sapCustId,
        sapCustMultSvcSite,
        sapIngressQosSchedulerPolicy,
        sapEgressQosSchedulerPolicy,
        sapSplitHorizonGrp,
        sapIngressSharedQueuePolicy,
        sapIngressMatchQinQDot1PBits,
        sapOperFlags,
        sapLastStatusChange,
        sapAntiSpoofing,
        sapTodSuite,
        sapIngUseMultipointShared,
        sapEgressQinQMarkTopOnly,
        sapEgressAggRateLimit,
        sapEndPoint,
        sapIngressVlanTranslation,
        sapSubType,
        sapCpmProtPolicyId,
        sapCpmProtMonitorMac,
        sapEgressFrameBasedAccounting,
        sapEthernetLLFAdminStatus,
        sapEthernetLLFOperStatus,
        sapTlsMvplsRowStatus,
        sapEgressFrameBasedAccounting,
        sapCallingStationId
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP general capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 124 }

tmnxSapIgmpTrkGroup              OBJECT-GROUP
    OBJECTS     {
        sapIgmpTrkTableLastMgmtChange,
        sapIgmpTrkLastMgmtChange,
        sapIgmpTrkExpiryTime,
        sapIgmpTrkImportPlcy,
        sapIgmpTrkMaxNbrGrps,
        sapIgmpTrkNbrGrps,
        sapIgmpTrkMaxNbrSrcs
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of IGMP host tracking
         capabilities for SAPs on Nokia SROS series systems."
    ::= { tmnxSapGroups 125 }

tmnxSapFrGroup                   OBJECT-GROUP
    OBJECTS     {
        sapFrInfoFrf12Mode,
        sapFrInfoSchedulingClass,
        sapFrInfoLastChanged,
        sapFrf12InfoFragmentThreshold,
        sapFrf12InfoLastChanged
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP FR capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 126 }

tmnxSapIpipeV7v0Group            OBJECT-GROUP
    OBJECTS     {
        sapIpipeCeInetAddress,
        sapIpipeCeInetAddressType,
        sapIpipeMacRefreshInterval,
        sapIpipeMacAddress,
        sapIpipeArpedMacAddress,
        sapIpipeArpedMacAddressTimeout,
        sapIpipeDiscoveredCeInetAddrType,
        sapIpipeDiscoveredCeInetAddr,
        sapIpipeUseBroadcastMac,
        sapIpipeUsingBroadcastMac
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP IPIPE capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 127 }

tmnxSapBsxV7v0Group              OBJECT-GROUP
    OBJECTS     {
        sapStaticHostAppProfile,
        sapSubMgmtDefAppProfile,
        sapSubMgmtNonSubTrafficAppProf,
        msapPlcySubMgmtDefAppProfile,
        msapPlcySubMgmtNonSubTrafAppProf,
        sapIsaAaApplicationProfile
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of BSX (Application
         Assurance) capabilities on Nokia SROS series systems in release R7.0"
    ::= { tmnxSapGroups 128 }

tmnxSapRadiusFallbackGroup       OBJECT-GROUP
    OBJECTS     {
        sapTlsDefMsapService,
        sapTlsDefMsapGroupIf
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of RADIUS fallback
         capabilities for SAPs on Nokia SROS series systems."
    ::= { tmnxSapGroups 129 }

tmnxSapPbbGroup                  OBJECT-GROUP
    OBJECTS     {
        sapPbbRowStatus,
        sapPbbLastMgmtChange,
        sapPbbIgmpSnpgMRouter
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Provider Backbone
         Bridging (PBB/IEEE 802.1ah) capabilities for SAPs on Nokia SROS series
         systems."
    ::= { tmnxSapGroups 130 }

tmnxSapFrGroupV8v0               OBJECT-GROUP
    OBJECTS     {
        sapFrInfoFrf12Mode,
        sapFrInfoSchedulingClass,
        sapFrInfoLastChanged,
        sapFrf12InfoFragmentThreshold,
        sapFrf12InfoLastChanged,
        sapFrf12InfoInterleave
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP FR capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 131 }

tmnxSapTlsV8v0Group              OBJECT-GROUP
    OBJECTS     {
        sapTlsStpAdminStatus,
        sapTlsStpPriority,
        sapTlsStpPortNum,
        sapTlsStpPathCost,
        sapTlsStpRapidStart,
        sapTlsStpBpduEncap,
        sapTlsStpPortState,
        sapTlsStpDesignatedBridge,
        sapTlsStpDesignatedPort,
        sapTlsStpForwardTransitions,
        sapTlsStpInConfigBpdus,
        sapTlsStpInTcnBpdus,
        sapTlsStpInBadBpdus,
        sapTlsStpOutConfigBpdus,
        sapTlsStpOutTcnBpdus,
        sapTlsStpOperBpduEncap,
        sapTlsVpnId,
        sapTlsCustId,
        sapTlsMacAddressLimit,
        sapTlsNumMacAddresses,
        sapTlsNumStaticMacAddresses,
        sapTlsMacLearning,
        sapTlsMacAgeing,
        sapTlsStpOperEdge,
        sapTlsStpAdminPointToPoint,
        sapTlsStpPortRole,
        sapTlsStpAutoEdge,
        sapTlsStpOperProtocol,
        sapTlsStpInRstBpdus,
        sapTlsStpOutRstBpdus,
        sapTlsLimitMacMove,
        sapTlsMacPinning,
        sapTlsDiscardUnknownSource,
        sapTlsMvplsPruneState,
        sapTlsMvplsMgmtService,
        sapTlsMvplsMgmtPortId,
        sapTlsMvplsMgmtEncapValue,
        sapTlsArpReplyAgent,
        sapTlsStpException,
        sapTlsAuthenticationPolicy,
        sapTlsL2ptTermination,
        sapTlsBpduTranslation,
        sapTlsStpRootGuard,
        sapTlsStpInsideRegion,
        sapTlsEgressMcastGroup,
        sapTlsStpInMstBpdus,
        sapTlsStpOutMstBpdus,
        sapTlsRestProtSrcMac,
        sapTlsRestProtSrcMacAction,
        sapTlsRestUnprotDstMac,
        sapTlsStpRxdDesigBridge,
        sapTlsStpRootGuardViolation,
        sapTlsShcvAction,
        sapTlsShcvSrcIp,
        sapTlsShcvSrcMac,
        sapTlsShcvInterval,
        sapTlsMvplsMgmtMsti,
        sapTlsMacMoveNextUpTime,
        sapTlsMacMoveRateExcdLeft,
        sapTlsL2ptForceBoundary,
        sapTlsLimitMacMoveLevel,
        sapTlsBpduTransOper,
        sapTlsDefMsapPolicy,
        sapTlsL2ptProtocols,
        sapTlsL2ptForceProtocols,
        sapTlsDhcpMsapTrigger,
        sapTlsDhcpProxyLeaseTime,
        sapTlsDhcpRemoteId,
        sapTlsMrpJoinTime,
        sapTlsMrpLeaveTime,
        sapTlsMrpLeaveAllTime,
        sapTlsMrpPeriodicTime,
        sapTlsMrpPeriodicEnabled,
        sapTlsPppoePolicy,
        sapTlsMrpPolicy,
        sapTlsSiteName,
        sapTlsDhcp6MsapTrigger,
        sapTlsInTcBitBpdus,
        sapTlsOutTcBitBpdus
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP TLS capabilities on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 132 }

tmnxSapDhcpV8v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcpAdminState,
        sapTlsDhcpDescription,
        sapTlsDhcpSnoop,
        sapTlsDhcpLeasePopulate,
        sapTlsDhcpOperLeasePopulate,
        sapTlsDhcpInfoAction,
        sapTlsDhcpCircuitId,
        sapTlsDhcpRemoteIdString,
        sapTlsDhcpProxyAdminState,
        sapTlsDhcpProxyServerAddr,
        sapTlsDhcpProxyLTRadiusOverride,
        sapTlsDhcpVendorIncludeOptions,
        sapTlsDhcpVendorOptionString,
        sapTlsDhcpStatsClntSnoopdPckts,
        sapTlsDhcpStatsSrvrSnoopdPckts,
        sapTlsDhcpStatsClntForwdPckts,
        sapTlsDhcpStatsSrvrForwdPckts,
        sapTlsDhcpStatsClntDropdPckts,
        sapTlsDhcpStatsSrvrDropdPckts,
        sapTlsDhcpStatsClntProxRadPckts,
        sapTlsDhcpStatsClntProxLSPckts,
        sapTlsDhcpStatsGenReleasePckts,
        sapTlsDhcpStatsGenForceRenPckts,
        sapDhcpOperLeasePopulate
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS DHCP
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 133 }

tmnxSapV8v0Group                 OBJECT-GROUP
    OBJECTS     {
        sapNumEntries,
        sapPortId,
        sapEncapValue,
        sapRowStatus,
        sapType,
        sapDescription,
        sapAdminStatus,
        sapOperStatus,
        sapIngressQosPolicyId,
        sapIngressMacFilterId,
        sapIngressIpFilterId,
        sapIngressVlanTranslationId,
        sapEgressQosPolicyId,
        sapEgressMacFilterId,
        sapEgressIpFilterId,
        sapMirrorStatus,
        sapIesIfIndex,
        sapLastMgmtChange,
        sapCollectAcctStats,
        sapAccountingPolicyId,
        sapVpnId,
        sapCustId,
        sapCustMultSvcSite,
        sapIngressQosSchedulerPolicy,
        sapEgressQosSchedulerPolicy,
        sapSplitHorizonGrp,
        sapIngressSharedQueuePolicy,
        sapIngressMatchQinQDot1PBits,
        sapOperFlags,
        sapLastStatusChange,
        sapAntiSpoofing,
        sapTodSuite,
        sapIngUseMultipointShared,
        sapEgressQinQMarkTopOnly,
        sapEgressAggRateLimit,
        sapEndPoint,
        sapIngressVlanTranslation,
        sapSubType,
        sapCpmProtPolicyId,
        sapCpmProtMonitorMac,
        sapEgressFrameBasedAccounting,
        sapEthernetLLFAdminStatus,
        sapEthernetLLFOperStatus,
        sapTlsMvplsRowStatus,
        sapEgressFrameBasedAccounting,
        sapCallingStationId,
        sapIngPolicerPolicy,
        sapEgrPolicerPolicy,
        sapIpv6HostInfoIpoeDhcp6Hosts,
        sapIpv6HostInfoPppDhcp6Hosts,
        sapIpv6HostInfoPppSLAACHosts,
        sapIngQosQMBSBytes,
        sapEgrQosQMBSBytes
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP general capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 134 }

tmnxSapFPropBMacV8v0Group        OBJECT-GROUP
    OBJECTS     {
        sapFPropBMacAddrTblLastChgd,
        sapFPropBMacAddrRowStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP fault propagation
         BMac addresses on Nokia SROS series systems."
    ::= { tmnxSapGroups 135 }

tmnxSapPlcrV8v0Group             OBJECT-GROUP
    OBJECTS     {
        sapIngPlcrCtrlOvrLastChgd,
        sapIngPlcrCtrlOvrLvlLastChgd,
        sapIngPlcrCtrlOvrLvlMBS,
        sapIngPlcrCtrlOvrLvlTblLastChgd,
        sapIngPlcrCtrlOvrMaxRate,
        sapIngPlcrCtrlOvrMinMBSSep,
        sapIngPlcrCtrlOvrRowStatus,
        sapIngPlcrCtrlOvrTblLastChgd,
        sapIngPlcrOvrAdminCIR,
        sapIngPlcrOvrAdminPIR,
        sapIngPlcrOvrCBS,
        sapIngPlcrOvrPktOffset,
        sapIngPlcrOvrLastChgd,
        sapIngPlcrOvrMBS,
        sapIngPlcrOvrRowStatus,
        sapIngPlcrOvrStatMode,
        sapIngPlcrOvrTblLastChgd,
        sapEgrPlcrCtrlOvrLastChgd,
        sapEgrPlcrCtrlOvrLvlLastChgd,
        sapEgrPlcrCtrlOvrLvlMBS,
        sapEgrPlcrCtrlOvrLvlTblLastChgd,
        sapEgrPlcrCtrlOvrMaxRate,
        sapEgrPlcrCtrlOvrMinMBSSep,
        sapEgrPlcrCtrlOvrRowStatus,
        sapEgrPlcrCtrlOvrTblLastChgd,
        sapEgrPlcrOvrAdminCIR,
        sapEgrPlcrOvrAdminPIR,
        sapEgrPlcrOvrCBS,
        sapEgrPlcrOvrPktOffset,
        sapEgrPlcrOvrLastChgd,
        sapEgrPlcrOvrMBS,
        sapEgrPlcrOvrRowStatus,
        sapEgrPlcrOvrStatMode,
        sapEgrPlcrOvrTblLastChgd
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Policer on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 136 }

tmnxSapTlsV7v0Group              OBJECT-GROUP
    OBJECTS     {
        sapTlsShcvRetryTimeout,
        sapTlsShcvRetryCount
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS capabilities on
         Nokia SROS series systems added in release 7.0."
    ::= { tmnxSapGroups 137 }

tmnxSapSubMgmtV8v0Group          OBJECT-GROUP
    OBJECTS     {
        sapSubMgmtAdminStatus,
        sapSubMgmtDefSubProfile,
        sapSubMgmtDefSlaProfile,
        sapSubMgmtSubIdentPolicy,
        sapSubMgmtSubscriberLimit,
        sapSubMgmtProfiledTrafficOnly,
        sapSubMgmtNonSubTrafficSubIdent,
        sapSubMgmtNonSubTrafficSubProf,
        sapSubMgmtNonSubTrafficSlaProf,
        sapSubMgmtMacDaHashing,
        sapSubMgmtDefSubIdent,
        sapSubMgmtDefSubIdentString,
        sapSubMgmtDefInterDestId,
        sapSubMgmtDefInterDestIdString
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Sub-management
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 138 }

tmnxSapMsapV8v0Group             OBJECT-GROUP
    OBJECTS     {
        msapPlcyRowStatus,
        msapPlcyLastChanged,
        msapPlcyDescription,
        msapPlcyCpmProtPolicyId,
        msapPlcyCpmProtMonitorMac,
        msapPlcySubMgmtDefSubId,
        msapPlcySubMgmtDefSubIdStr,
        msapPlcySubMgmtDefSubProfile,
        msapPlcySubMgmtDefSlaProfile,
        msapPlcySubMgmtSubIdPlcy,
        msapPlcySubMgmtSubscriberLimit,
        msapPlcySubMgmtProfiledTrafOnly,
        msapPlcySubMgmtNonSubTrafSubId,
        msapPlcySubMgmtNonSubTrafSubProf,
        msapPlcySubMgmtNonSubTrafSlaProf,
        msapPlcySubMgmtDefInterDestId,
        msapPlcySubMgmtDefInterDestIdStr,
        msapPlcyAssociatedMsaps,
        msapPlcyIgmpTrkExpiryTime,
        msapPlcyIgmpTrkImportPlcy,
        msapPlcyIgmpTrkMaxNbrGrps,
        msapPlcyIgmpTrkMaxNbrSrcs,
        msapTlsPlcyLastChanged,
        msapTlsPlcySplitHorizonGrp,
        msapTlsPlcyArpReplyAgent,
        msapTlsPlcySubMgmtMacDaHashing,
        msapTlsPlcyDhcpLeasePopulate,
        msapTlsPlcyDhcpPrxyAdminState,
        msapTlsPlcyDhcpPrxyServAddr,
        msapTlsPlcyDhcpPrxyServAddrType,
        msapTlsPlcyDhcpPrxyLTRadOverride,
        msapTlsPlcyDhcpInfoAction,
        msapTlsPlcyDhcpCircuitId,
        msapTlsPlcyDhcpRemoteId,
        msapTlsPlcyDhcpRemoteIdString,
        msapTlsPlcyDhcpVendorInclOpts,
        msapTlsPlcyDhcpVendorOptStr,
        msapTlsPlcyDhcpPrxyLeaseTime,
        msapTlsPlcyEgressMcastGroup,
        msapTlsPlcyIgmpSnpgImportPlcy,
        msapTlsPlcyIgmpSnpgFastLeave,
        msapTlsPlcyIgmpSnpgSendQueries,
        msapTlsPlcyIgmpSnpgGenQueryIntv,
        msapTlsPlcyIgmpSnpgQueryRespIntv,
        msapTlsPlcyIgmpSnpgRobustCount,
        msapTlsPlcyIgmpSnpgLastMembIntvl,
        msapTlsPlcyIgmpSnpgMaxNbrGrps,
        msapTlsPlcyIgmpSnpgMvrFromVplsId,
        msapTlsPlcyIgmpSnpgVersion,
        msapTlsPlcyIgmpSnpgMcacPlcyName,
        msapTlsPlcyIgmpSnpgMcacPrRsvMnBW,
        msapTlsPlcyIgmpSnpgMcacUncnstBW,
        msapIgmpSnpgMcacLevelRowStatus,
        msapIgmpSnpgMcacLevelLastChanged,
        msapIgmpSnpgMcacLevelBW,
        msapIgmpSnpgMcacLagRowStatus,
        msapIgmpSnpgMcacLagLastChanged,
        msapIgmpSnpgMcacLagLevel,
        msapInfoCreationSapPortEncapVal,
        msapInfoCreationPlcyName,
        msapInfoReEvalPolicy,
        msapInfoLastChanged,
        msapCaptureSapStatsPktsRecvd,
        msapCaptureSapStatsPktsRedirect,
        msapCaptureSapStatsPktsDropped,
        msapPlcyTblLastChgd,
        msapTlsPlcyTblLastChgd,
        msapIgmpSnpgMcacLvlTblLastChgd,
        msapIgmpSnpgMcacLagTblLastChgd,
        msapInfoTblLastChgd
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of managed SAP capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 139 }

tmnxSapQosV8v0Group              OBJECT-GROUP
    OBJECTS     {
        sapIngQosQueueId,
        sapIngQosQueueStatsOfferedHiPrioPackets,
        sapIngQosQueueStatsDroppedHiPrioPackets,
        sapIngQosQueueStatsOfferedLoPrioPackets,
        sapIngQosQueueStatsDroppedLoPrioPackets,
        sapIngQosQueueStatsOfferedHiPrioOctets,
        sapIngQosQueueStatsDroppedHiPrioOctets,
        sapIngQosQueueStatsOfferedLoPrioOctets,
        sapIngQosQueueStatsDroppedLoPrioOctets,
        sapIngQosQueueStatsForwardedInProfPackets,
        sapIngQosQueueStatsForwardedOutProfPackets,
        sapIngQosQueueStatsForwardedInProfOctets,
        sapIngQosQueueStatsForwardedOutProfOctets,
        sapIngQosCustId,
        sapIngQosQueueStatsUncoloredPacketsOffered,
        sapIngQosQueueStatsUncoloredOctetsOffered,
        sapEgrQosQueueId,
        sapEgrQosQueueStatsForwardedInProfPackets,
        sapEgrQosQueueStatsDroppedInProfPackets,
        sapEgrQosQueueStatsForwardedOutProfPackets,
        sapEgrQosQueueStatsDroppedOutProfPackets,
        sapEgrQosQueueStatsForwardedInProfOctets,
        sapEgrQosQueueStatsDroppedInProfOctets,
        sapEgrQosQueueStatsForwardedOutProfOctets,
        sapEgrQosQueueStatsDroppedOutProfOctets,
        sapEgrQosCustId,
        sapIngQosSchedStatsForwardedPackets,
        sapIngQosSchedStatsForwardedOctets,
        sapIngQosSchedCustId,
        sapEgrQosSchedStatsForwardedPackets,
        sapEgrQosSchedStatsForwardedOctets,
        sapEgrQosSchedCustId,
        sapIngQosQRowStatus,
        sapIngQosQLastMgmtChange,
        sapIngQosQOverrideFlags,
        sapIngQosQCBS,
        sapIngQosQHiPrioOnly,
        sapIngQosQCIRAdaptation,
        sapIngQosQPIRAdaptation,
        sapIngQosQAdminPIR,
        sapIngQosQAdminCIR,
        sapEgrQosQRowStatus,
        sapEgrQosQLastMgmtChange,
        sapEgrQosQOverrideFlags,
        sapEgrQosQCBS,
        sapEgrQosQHiPrioOnly,
        sapEgrQosQCIRAdaptation,
        sapEgrQosQPIRAdaptation,
        sapEgrQosQAdminPIR,
        sapEgrQosQAdminCIR,
        sapEgrQosQAvgOverhead,
        sapIngQosSRowStatus,
        sapIngQosSLastMgmtChange,
        sapIngQosSOverrideFlags,
        sapIngQosSPIR,
        sapIngQosSCIR,
        sapIngQosSSummedCIR,
        sapEgrQosSRowStatus,
        sapEgrQosSLastMgmtChange,
        sapEgrQosSOverrideFlags,
        sapEgrQosSPIR,
        sapEgrQosSCIR,
        sapEgrQosSSummedCIR,
        sapIngQosPStatsCustId,
        sapIngQosPStatsMode,
        sapIngQosPStatsOffHiPrioPkts,
        sapIngQosPStatsOffHiPrioPktsLo,
        sapIngQosPStatsOffHiPrioPktsHi,
        sapIngQosPStatsDrpHiPrioPkts,
        sapIngQosPStatsDrpHiPrioPktsLo,
        sapIngQosPStatsDrpHiPrioPktsHi,
        sapIngQosPStatsOffLoPrioPkts,
        sapIngQosPStatsOffLoPrioPktsLo,
        sapIngQosPStatsOffLoPrioPktsHi,
        sapIngQosPStatsDrpLoPrioPkts,
        sapIngQosPStatsDrpLoPrioPktsLo,
        sapIngQosPStatsDrpLoPrioPktsHi,
        sapIngQosPStatsOffHiPrioOcts,
        sapIngQosPStatsOffHiPrioOctsLo,
        sapIngQosPStatsOffHiPrioOctsHi,
        sapIngQosPStatsDrpHiPrioOcts,
        sapIngQosPStatsDrpHiPrioOctsLo,
        sapIngQosPStatsDrpHiPrioOctsHi,
        sapIngQosPStatsOffLoPrioOcts,
        sapIngQosPStatsOffLoPrioOctsLo,
        sapIngQosPStatsOffLoPrioOctsHi,
        sapIngQosPStatsDrpLoPrioOcts,
        sapIngQosPStatsDrpLoPrioOctsLo,
        sapIngQosPStatsDrpLoPrioOctsHi,
        sapIngQosPStatsFwdInProfPkts,
        sapIngQosPStatsFwdInProfPktsLo,
        sapIngQosPStatsFwdInProfPktsHi,
        sapIngQosPStatsFwdOutProfPkts,
        sapIngQosPStatsFwdOutProfPktsLo,
        sapIngQosPStatsFwdOutProfPktsHi,
        sapIngQosPStatsFwdInProfOcts,
        sapIngQosPStatsFwdInProfOctsLo,
        sapIngQosPStatsFwdInProfOctsHi,
        sapIngQosPStatsFwdOutProfOcts,
        sapIngQosPStatsFwdOutProfOctsLo,
        sapIngQosPStatsFwdOutProfOctsHi,
        sapIngQosPStatsUncolPktsOff,
        sapIngQosPStatsUncolPktsOffLo,
        sapIngQosPStatsUncolPktsOffHi,
        sapIngQosPStatsUncolOctsOff,
        sapIngQosPStatsUncolOctsOffLo,
        sapIngQosPStatsUncolOctsOffHi,
        sapEgrQosPStatsCustId,
        sapEgrQosPStatsMode,
        sapEgrQosPStatsOffInProfPkts,
        sapEgrQosPStatsOffInProfPktsLo,
        sapEgrQosPStatsOffInProfPktsHi,
        sapEgrQosPStatsFwdInProfPkts,
        sapEgrQosPStatsFwdInProfPktsLo,
        sapEgrQosPStatsFwdInProfPktsHi,
        sapEgrQosPStatsDrpInProfPkts,
        sapEgrQosPStatsDrpInProfPktsLo,
        sapEgrQosPStatsDrpInProfPktsHi,
        sapEgrQosPStatsOffOutProfPkts,
        sapEgrQosPStatsOffOutProfPktsLo,
        sapEgrQosPStatsOffOutProfPktsHi,
        sapEgrQosPStatsFwdOutProfPkts,
        sapEgrQosPStatsFwdOutProfPktsLo,
        sapEgrQosPStatsFwdOutProfPktsHi,
        sapEgrQosPStatsDrpOutProfPkts,
        sapEgrQosPStatsDrpOutProfPktsLo,
        sapEgrQosPStatsDrpOutProfPktsHi,
        sapEgrQosPStatsOffInProfOcts,
        sapEgrQosPStatsOffInProfOctsLo,
        sapEgrQosPStatsOffInProfOctsHi,
        sapEgrQosPStatsFwdInProfOcts,
        sapEgrQosPStatsFwdInProfOctsLo,
        sapEgrQosPStatsFwdInProfOctsHi,
        sapEgrQosPStatsDrpInProfOcts,
        sapEgrQosPStatsDrpInProfOctsLo,
        sapEgrQosPStatsDrpInProfOctsHi,
        sapEgrQosPStatsOffOutProfOcts,
        sapEgrQosPStatsOffOutProfOctsLo,
        sapEgrQosPStatsOffOutProfOctsHi,
        sapEgrQosPStatsFwdOutProfOcts,
        sapEgrQosPStatsFwdOutProfOctsLo,
        sapEgrQosPStatsFwdOutProfOctsHi,
        sapEgrQosPStatsDrpOutProfOcts,
        sapEgrQosPStatsDrpOutProfOctsLo,
        sapEgrQosPStatsDrpOutProfOctsHi,
        sapEgrQosPStatsUncolPktsOff,
        sapEgrQosPStatsUncolPktsOffLo,
        sapEgrQosPStatsUncolPktsOffHi,
        sapEgrQosPStatsUncolOctsOff,
        sapEgrQosPStatsUncolOctsOffLo,
        sapEgrQosPStatsUncolOctsOffHi,
        sapIgQosPlcyPStatCustId,
        sapIgQosPlcyPStatMode,
        sapIgQosPlcyPStatOffHiPrioPkts,
        sapIgQosPlcyPStatDrpHiPrioPkts,
        sapIgQosPlcyPStatOffLoPrioPkts,
        sapIgQosPlcyPStatDrpLoPrioPkts,
        sapIgQosPlcyPStatOffHiPrioOcts,
        sapIgQosPlcyPStatDrpHiPrioOcts,
        sapIgQosPlcyPStatOffLoPrioOcts,
        sapIgQosPlcyPStatDrpLoPrioOcts,
        sapIgQosPlcyPStatFwdInProfPkts,
        sapIgQosPlcyPStatFwdOutProfPkts,
        sapIgQosPlcyPStatFwdInProfOcts,
        sapIgQosPlcyPStatFwdOutProfOcts,
        sapIgQosPlcyPStatUncolPktsOff,
        sapIgQosPlcyPStatUncolOctsOff,
        sapIgQosPlcyPStatOffHiPrioPkts,
        sapIgQosPlcyPStatOffHiPrioPktsL,
        sapIgQosPlcyPStatOffHiPrioPktsH,
        sapIgQosPlcyPStatDrpHiPrioPkts,
        sapIgQosPlcyPStatDrpHiPrioPktsL,
        sapIgQosPlcyPStatDrpHiPrioPktsH,
        sapIgQosPlcyPStatOffLoPrioPkts,
        sapIgQosPlcyPStatOffLoPrioPktsL,
        sapIgQosPlcyPStatOffLoPrioPktsH,
        sapIgQosPlcyPStatDrpLoPrioPkts,
        sapIgQosPlcyPStatDrpLoPrioPktsL,
        sapIgQosPlcyPStatDrpLoPrioPktsH,
        sapIgQosPlcyPStatOffHiPrioOcts,
        sapIgQosPlcyPStatOffHiPrioOctsL,
        sapIgQosPlcyPStatOffHiPrioOctsH,
        sapIgQosPlcyPStatDrpHiPrioOcts,
        sapIgQosPlcyPStatDrpHiPrioOctsL,
        sapIgQosPlcyPStatDrpHiPrioOctsH,
        sapIgQosPlcyPStatOffLoPrioOcts,
        sapIgQosPlcyPStatOffLoPrioOctsL,
        sapIgQosPlcyPStatOffLoPrioOctsH,
        sapIgQosPlcyPStatDrpLoPrioOcts,
        sapIgQosPlcyPStatDrpLoPrioOctsL,
        sapIgQosPlcyPStatDrpLoPrioOctsH,
        sapIgQosPlcyPStatFwdInProfPkts,
        sapIgQosPlcyPStatFwdInProfPktsL,
        sapIgQosPlcyPStatFwdInProfPktsH,
        sapIgQosPlcyPStatFwdOutProfPkts,
        sapIgQosPlcyPStatFwdOutProfPktsL,
        sapIgQosPlcyPStatFwdOutProfPktsH,
        sapIgQosPlcyPStatFwdInProfOcts,
        sapIgQosPlcyPStatFwdInProfOctsL,
        sapIgQosPlcyPStatFwdInProfOctsH,
        sapIgQosPlcyPStatFwdOutProfOcts,
        sapIgQosPlcyPStatFwdOutProfOctsL,
        sapIgQosPlcyPStatFwdOutProfOctsH,
        sapIgQosPlcyPStatUncolPktsOff,
        sapIgQosPlcyPStatUncolPktsOffL,
        sapIgQosPlcyPStatUncolPktsOffH,
        sapIgQosPlcyPStatUncolOctsOff,
        sapIgQosPlcyPStatUncolOctsOffL,
        sapIgQosPlcyPStatUncolOctsOffH,
        sapEgQosPlcyPStatCustId,
        sapEgQosPlcyPStatMode,
        sapEgQosPlcyPStatOffInProfPkts,
        sapEgQosPlcyPStatOffInProfPktsL,
        sapEgQosPlcyPStatOffInProfPktsH,
        sapEgQosPlcyPStatFwdInProfPkts,
        sapEgQosPlcyPStatFwdInProfPktsL,
        sapEgQosPlcyPStatFwdInProfPktsH,
        sapEgQosPlcyPStatDrpInProfPkts,
        sapEgQosPlcyPStatDrpInProfPktsL,
        sapEgQosPlcyPStatDrpInProfPktsH,
        sapEgQosPlcyPStatOffOutProfPkts,
        sapEgQosPlcyPStatOffOutProfPktsL,
        sapEgQosPlcyPStatOffOutProfPktsH,
        sapEgQosPlcyPStatFwdOutProfPkts,
        sapEgQosPlcyPStatFwdOutProfPktsL,
        sapEgQosPlcyPStatFwdOutProfPktsH,
        sapEgQosPlcyPStatDrpOutProfPkts,
        sapEgQosPlcyPStatDrpOutProfPktsL,
        sapEgQosPlcyPStatDrpOutProfPktsH,
        sapEgQosPlcyPStatOffInProfOcts,
        sapEgQosPlcyPStatOffInProfOctsL,
        sapEgQosPlcyPStatOffInProfOctsH,
        sapEgQosPlcyPStatFwdInProfOcts,
        sapEgQosPlcyPStatFwdInProfOctsL,
        sapEgQosPlcyPStatFwdInProfOctsH,
        sapEgQosPlcyPStatDrpInProfOcts,
        sapEgQosPlcyPStatDrpInProfOctsL,
        sapEgQosPlcyPStatDrpInProfOctsH,
        sapEgQosPlcyPStatOffOutProfOcts,
        sapEgQosPlcyPStatOffOutProfOctsL,
        sapEgQosPlcyPStatOffOutProfOctsH,
        sapEgQosPlcyPStatFwdOutProfOcts,
        sapEgQosPlcyPStatFwdOutProfOctsL,
        sapEgQosPlcyPStatFwdOutProfOctsH,
        sapEgQosPlcyPStatDrpOutProfOcts,
        sapEgQosPlcyPStatDrpOutProfOctsL,
        sapEgQosPlcyPStatDrpOutProfOctsH,
        sapEgrQosArbitStatsFwdOcts,
        sapEgrQosArbitStatsFwdOctsHi,
        sapEgrQosArbitStatsFwdOctsLo,
        sapEgrQosArbitStatsFwdPkts,
        sapEgrQosArbitStatsFwdPktsHi,
        sapEgrQosArbitStatsFwdPktsLo,
        sapIngQosArbitStatsFwdOcts,
        sapIngQosArbitStatsFwdOctsHi,
        sapIngQosArbitStatsFwdOctsLo,
        sapIngQosArbitStatsFwdPkts,
        sapIngQosArbitStatsFwdPktsHi,
        sapIngQosArbitStatsFwdPktsLo,
        sapPortIdEgrQosArbitFwdOcts,
        sapPortIdEgrQosArbitFwdOctsHi,
        sapPortIdEgrQosArbitFwdOctsLo,
        sapPortIdEgrQosArbitFwdPkts,
        sapPortIdEgrQosArbitFwdPktsHi,
        sapPortIdEgrQosArbitFwdPktsLo,
        sapPortIdIngQosArbitFwdOcts,
        sapPortIdIngQosArbitFwdOctsHi,
        sapPortIdIngQosArbitFwdOctsLo,
        sapPortIdIngQosArbitFwdPkts,
        sapPortIdIngQosArbitFwdPktsHi,
        sapPortIdIngQosArbitFwdPktsLo
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 140 }

tmnxSapMrpV8v0Group              OBJECT-GROUP
    OBJECTS     {
        sapTlsMrpRxPdus,
        sapTlsMrpDroppedPdus,
        sapTlsMrpTxPdus,
        sapTlsMrpRxNewEvent,
        sapTlsMrpRxJoinInEvent,
        sapTlsMrpRxInEvent,
        sapTlsMrpRxJoinEmptyEvent,
        sapTlsMrpRxEmptyEvent,
        sapTlsMrpRxLeaveEvent,
        sapTlsMrpTxNewEvent,
        sapTlsMrpTxJoinInEvent,
        sapTlsMrpTxInEvent,
        sapTlsMrpTxJoinEmptyEvent,
        sapTlsMrpTxEmptyEvent,
        sapTlsMrpTxLeaveEvent,
        sapTlsMmrpDeclared,
        sapTlsMmrpRegistered,
        sapTlsMmrpEndStation
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP MRP capabilities on
         release 8.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 141 }

tmnxSapMvrpV8v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTmplLastChanged,
        sapTmplRowStatus,
        sapTmplSapCount,
        sapTmplType,
        sapTmplTblLastChanged,
        sapTmplTlsLastChanged,
        sapTmplTlsMacAgeing,
        sapTmplTlsTblLastChanged,
        sapTlsEsVidGrpEndVlanTag,
        sapTlsEsVidGrpLastChgd,
        sapTlsEsVidGrpRowStatus,
        sapTlsEsVidGrpStartVlanTag,
        sapTlsEsVidGrpTblLastChanged,
        sapTmplUsed,
        sapTmplUserCreationOrigin,
        sapTmplUserCreatorSvcId,
        sapTmplCollectAcctStats,
        sapTmplEgrPolicerPolicy,
        sapTmplEgressAggRateLimit,
        sapTmplEgressFrameBasedAcctg,
        sapTmplEgressIpFilterId,
        sapTmplEgressIpv6FilterId,
        sapTmplEgressMacFilterId,
        sapTmplEgressQinQMarkTopOnly,
        sapTmplEgressQosPolicyId,
        sapTmplEgressQosSchedulerPolicy,
        sapTmplIngPolicerPolicy,
        sapTmplIngUseMultipointShared,
        sapTmplIngressAggRateLimit,
        sapTmplIngressIpFilterId,
        sapTmplIngressIpv6FilterId,
        sapTmplIngressMacFilterId,
        sapTmplIngressMatchQinQDot1PBits,
        sapTmplIngressQosPolicyId,
        sapTmplIngressQosSchedulerPolicy,
        sapTmplIngressSharedQueuePolicy,
        sapTmplTlsBpduTranslation,
        sapTmplTlsDiscardUnknownSource,
        sapTmplTlsL2ptProtocols,
        sapTmplTlsL2ptTermination,
        sapTmplTlsLimitMacMove,
        sapTmplTlsLimitMacMoveLevel,
        sapTmplTlsMacAddressLimit,
        sapTmplTlsMacLearning,
        sapTmplTlsStpAdminPointToPoint,
        sapTmplTlsStpAdminStatus,
        sapTmplTlsStpAutoEdge,
        sapTmplTlsStpBpduEncap,
        sapTmplTlsStpPathCost,
        sapTmplTlsStpPriority,
        sapTmplTlsStpRapidStart,
        sapTmplTlsStpRootGuard,
        sapTmplDot1agCfmMip,
        sapTmplCpmProtPolicyId,
        sapTmplCpmProtMonitorMac,
        sapTlsDataSapInstStatus,
        sapTlsDataSapInstLastErr,
        sapTlsMvrpDeclared,
        sapTlsMvrpEndStation,
        sapTlsMvrpRegistered,
        sapTlsMvrpAdminStatus,
        sapTlsMvrpOperStatus,
        sapTlsInTcBitBpdus,
        sapTlsOutTcBitBpdus
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP MVRP capabilities on
         release 8.0R4 of Nokia SROS series systems."
    ::= { tmnxSapGroups 142 }

tmnxSapIpipeV8v0Group            OBJECT-GROUP
    OBJECTS     {
        sapIpipeCeInetAddress,
        sapIpipeCeInetAddressType,
        sapIpipeMacRefreshInterval,
        sapIpipeMacAddress,
        sapIpipeArpedMacAddress,
        sapIpipeArpedMacAddressTimeout,
        sapIpipeDiscoveredCeInetAddrType,
        sapIpipeDiscoveredCeInetAddr,
        sapIpipeUseBroadcastMac,
        sapIpipeUsingBroadcastMac,
        sapIpipeIpv6LinkLocalCeInetAddr,
        sapIpipeIpv6GlobalCeInetAddr,
        sapIpipeIpv6DiscoveredMacAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP IPIPE capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 143 }

tmnxSapEthRingGroup              OBJECT-GROUP
    OBJECTS     {
        sapEthRingIndex
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP ETH-RING
         capabilities on Nokia SROS systems."
    ::= { tmnxSapGroups 144 }

tmnxSapOverrideV8v0Group         OBJECT-GROUP
    OBJECTS     {
        sapIngQosQWeight,
        sapIngQosQCIRWeight,
        sapEgrQosQWeight,
        sapEgrQosQCIRWeight
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP override
         capabilities on release 8.0R4 of Nokia SROS series systems."
    ::= { tmnxSapGroups 145 }

tmnxSapV9v0Group                 OBJECT-GROUP
    OBJECTS     {
        sapOperGrp,
        sapMonitorOperGrp,
        sapIngressFlowspec,
        sapTlsPppMsapTrigger,
        sapTlsPppPolicy,
        sapTlsTrackSrrpInst,
        sapTlsPppUserDb,
        sapTlsPppoeUserDb,
        sapHostsAdminState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP general capabilities
         on release 9.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 146 }

tmnxSapAtmV9v0Group              OBJECT-GROUP
    OBJECTS     {
        sapAtmSubPppIndex,
        sapAtmDetectedEncapsulation,
        sapAtmIngressTrafficDescIndexOvr,
        sapAtmEgressTrafficDescIndexOvr,
        sapAtmVcRangeRowStatus,
        sapAtmVcRangeLastMgmtChange,
        sapAtmVcRangeVpiStart,
        sapAtmVcRangeVpiEnd,
        sapAtmVcRangeVciStart,
        sapAtmVcRangeVciEnd,
        sapAtmPppStatsRxPackets,
        sapAtmPppStatsRxDropped,
        sapAtmPppStatsTxPackets
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP ATM capabilities
         that were added in release 9.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 147 }

tmnxSapEthCfmMonitorGroup        OBJECT-GROUP
    OBJECTS     {
        sapCpmProtEthCfmMonitorFlags,
        sapTmplCpmProtEthCfmMonitorFlags
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Ethernet
         Connectivity Fault Management Monitoring capabilities on release 8.0
         R4 of Nokia SROS series systems."
    ::= { tmnxSapGroups 148 }

tmnxSapGreGroup                  OBJECT-GROUP
    OBJECTS     {
        tmnxGreTunnelAdminState,
        tmnxGreTunnelBackupRemIpAddr,
        tmnxGreTunnelBackupRemIpAddrType,
        tmnxGreTunnelOperRemIpAddr,
        tmnxGreTunnelOperRemIpAddrType,
        tmnxGreTunnelBytesRx,
        tmnxGreTunnelBytesRxHi,
        tmnxGreTunnelBytesRxLo,
        tmnxGreTunnelBytesTx,
        tmnxGreTunnelBytesTxHi,
        tmnxGreTunnelBytesTxLo,
        tmnxGreTunnelDeliverySvcId,
        tmnxGreTunnelDescription,
        tmnxGreTunnelDscp,
        tmnxGreTunnelLastChanged,
        tmnxGreTunnelDstIpAddr,
        tmnxGreTunnelDstIpAddrType,
        tmnxGreTunnelLclIpAddr,
        tmnxGreTunnelLclIpAddrType,
        tmnxGreTunnelOperFlags,
        tmnxGreTunnelOperState,
        tmnxGreTunnelPktsRx,
        tmnxGreTunnelPktsRxHi,
        tmnxGreTunnelPktsRxLo,
        tmnxGreTunnelPktsTx,
        tmnxGreTunnelPktsTxHi,
        tmnxGreTunnelPktsTxLo,
        tmnxGreTunnelRemIpAddr,
        tmnxGreTunnelRemIpAddrType,
        tmnxGreTunnelRowStatus,
        tmnxGreTunnelRxErrors,
        tmnxGreTunnelTableLastChanged,
        tmnxGreTunnelTxErrors,
        tmnxGreTunnelInvalidChksumRx,
        tmnxGreTunnelInvalidChksumRxHi,
        tmnxGreTunnelInvalidChksumRxLo,
        tmnxGreTunnelKeyIgnoredRx,
        tmnxGreTunnelKeyIgnoredRxHi,
        tmnxGreTunnelKeyIgnoredRxLo,
        tmnxGreTunnelLoopsRx,
        tmnxGreTunnelLoopsRxHi,
        tmnxGreTunnelLoopsRxLo,
        tmnxGreTunnelSeqIgnoredRx,
        tmnxGreTunnelSeqIgnoredRxHi,
        tmnxGreTunnelSeqIgnoredRxLo,
        tmnxGreTunnelTooBigTx,
        tmnxGreTunnelTooBigTxHi,
        tmnxGreTunnelTooBigTxLo,
        tmnxGreTunnelVersUnsupRx,
        tmnxGreTunnelVersUnsupRxHi,
        tmnxGreTunnelVersUnsupRxLo,
        tmnxSapGreTunnelCount
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP GRE specific
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 149 }

tmnxSapIgmpTrkV8v0Group          OBJECT-GROUP
    OBJECTS     {
        sapIgmpTrkDisRtrAlertChk
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of IGMP host tracking
         capabilities for SAPs on release 8.0 Nokia SROS series systems."
    ::= { tmnxSapGroups 150 }

tmnxSapBsxV9v0Group              OBJECT-GROUP
    OBJECTS     {
        sapTransitIpPolicyId,
        sapTransitPrefixPolicyId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of BSX (Application
         Assurance) SAP capabilities on Nokia SROS series systems in release
         9.0"
    ::= { tmnxSapGroups 151 }

tmnxSapMsapV9v0Group             OBJECT-GROUP
    OBJECTS     {
        msapAtmPlcyLastChanged,
        msapAtmPlcyIngTrafficDescIndex,
        msapAtmPlcyEgrTrafficDescIndex,
        msapAtmPlcyOamAlarmCellHandling,
        msapAtmPlcyOamPeriodicLoopback,
        msapAtmPlcyTblLastChgd
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of managed SAP capabilities
         on Nokia SROS series systems added in release 9.0."
    ::= { tmnxSapGroups 152 }

tmnxSapOverrideV9v0Group         OBJECT-GROUP
    OBJECTS     {
        sapIngQosQAdminPIRPercent,
        sapIngQosQAdminCIRPercent,
        sapEgrQosQAdminPIRPercent,
        sapEgrQosQAdminCIRPercent
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP override
         capabilities on Nokia SROS series systems added in release 9.0."
    ::= { tmnxSapGroups 153 }

tmnxSapPlcrV9v0Group             OBJECT-GROUP
    OBJECTS     {
        sapEgrPlcrOvrAdminPIRPercent,
        sapEgrPlcrOvrAdminCIRPercent,
        sapIngPlcrOvrAdminPIRPercent,
        sapIngPlcrOvrAdminCIRPercent
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Policer on Nokia
         SROS series systems in release 9.0."
    ::= { tmnxSapGroups 154 }

tmnxSapEgrEncapGrpV9v0Group      OBJECT-GROUP
    OBJECTS     {
        sapEgrEncapGroupTblLastChgd,
        sapEgrEncapGroupRowStatus,
        sapEgrEncapGroupLastChanged,
        sapEgrEncapGroupType,
        sapEgrEncapGroupQosPerMember,
        sapEgrEncapGroupQosPolicyId,
        sapEgrEncapGroupSchedulerPolicy,
        sapEgrEncapGroupAggRateLimit,
        sapEgrEncapGrpFrameBasedAccnt,
        sapEgrEncapGrpMemActTblLastChgd,
        sapEgrEncapGroupBeginMember,
        sapEgrEncapGroupEndMember,
        sapEgrEncapGroupMemberAction,
        sapEgrEncapGrpRangeEndId,
        sapEgrEncapGrpMemberLastChanged,
        sapEgrEGBaseStLastClearedTime,
        sapEgrEGBaseStCustId,
        sapEgrEGBaseStQcDpdInPfPkts,
        sapEgrEGBaseStQcDpdInPfPkts,
        sapEgrEGBaseStQcDpdInPfPktsL,
        sapEgrEGBaseStQcDpdInPfPktsH,
        sapEgrEGBaseStQcDpdInPfOcts,
        sapEgrEGBaseStQcDpdInPfOctsL,
        sapEgrEGBaseStQcDpdInPfOctsH,
        sapEgrEGBaseStQcDpdOutPfPkts,
        sapEgrEGBaseStQcDpdOutPfPktsL,
        sapEgrEGBaseStQcDpdOutPfPktsH,
        sapEgrEGBaseStQcDpdOutPfOcts,
        sapEgrEGBaseStQcDpdOutPfOctsL,
        sapEgrEGBaseStQcDpdOutPfOctsH,
        sapEgrEGBaseStQcFwdInPfPkts,
        sapEgrEGBaseStQcFwdInPfPktsL,
        sapEgrEGBaseStQcFwdInPfPktsH,
        sapEgrEGBaseStQcFwdInPfOcts,
        sapEgrEGBaseStQcFwdInPfOctsL,
        sapEgrEGBaseStQcFwdInPfOctsH,
        sapEgrEGBaseStQcFwdOutPfPkts,
        sapEgrEGBaseStQcFwdOutPfPktsL,
        sapEgrEGBaseStQcFwdOutPfPktsH,
        sapEgrEGBaseStQcFwdOutPfOcts,
        sapEgrEGBaseStQcFwdOutPfOctsL,
        sapEgrEGBaseStQcFwdOutPfOctsH,
        sapEgrEGMbrBaseStQcDpdInPfPkts,
        sapEgrEGMbrBaseStQcDpdInPfPktsL,
        sapEgrEGMbrBaseStQcDpdInPfPktsH,
        sapEgrEGMbrBaseStQcDpdInPfOcts,
        sapEgrEGMbrBaseStQcDpdInPfOctsL,
        sapEgrEGMbrBaseStQcDpdInPfOctsH,
        sapEgrEGMbrBaseStQcDpdOutPfPkts,
        sapEgrEGMbrBaseStQcDpdOutPfPktsL,
        sapEgrEGMbrBaseStQcDpdOutPfPktsH,
        sapEgrEGMbrBaseStQcDpdOutPfOcts,
        sapEgrEGMbrBaseStQcDpdOutPfOctsL,
        sapEgrEGMbrBaseStQcDpdOutPfOctsH,
        sapEgrEGMbrBaseStQcFwdInPfPkts,
        sapEgrEGMbrBaseStQcFwdInPfPktsL,
        sapEgrEGMbrBaseStQcFwdInPfPktsH,
        sapEgrEGMbrBaseStQcFwdInPfOcts,
        sapEgrEGMbrBaseStQcFwdInPfOctsL,
        sapEgrEGMbrBaseStQcFwdInPfOctsH,
        sapEgrEGMbrBaseStQcFwdOutPfPkts,
        sapEgrEGMbrBaseStQcFwdOutPfPktsL,
        sapEgrEGMbrBaseStQcFwdOutPfPktsH,
        sapEgrEGMbrBaseStQcFwdOutPfOcts,
        sapEgrEGMbrBaseStQcFwdOutPfOctsL,
        sapEgrEGMbrBaseStQcFwdOutPfOctsH,
        sapEgrEGMbrBaseStLstClearedTime,
        sapEgrEGMbrBaseStCustId,
        sapEgrEGQueueStFwdInPfPkts,
        sapEgrEGQueueStFwdInPfPktsL,
        sapEgrEGQueueStFwdInPfPktsH,
        sapEgrEGQueueStDpdInPfPkts,
        sapEgrEGQueueStDpdInPfPktsL,
        sapEgrEGQueueStDpdInPfPktsH,
        sapEgrEGQueueStFwdOutPfPkts,
        sapEgrEGQueueStFwdOutPfPktsL,
        sapEgrEGQueueStFwdOutPfPktsH,
        sapEgrEGQueueStDpdOutPfPkts,
        sapEgrEGQueueStDpdOutPfPktsL,
        sapEgrEGQueueStDpdOutPfPktsH,
        sapEgrEGQueueStFwdInPfOcts,
        sapEgrEGQueueStFwdInPfOctsL,
        sapEgrEGQueueStFwdInPfOctsH,
        sapEgrEGQueueStDpdInPfOcts,
        sapEgrEGQueueStDpdInPfOctsL,
        sapEgrEGQueueStDpdInPfOctsH,
        sapEgrEGQueueStFwdOutPfOcts,
        sapEgrEGQueueStFwdOutPfOctsL,
        sapEgrEGQueueStFwdOutPfOctsH,
        sapEgrEGQueueStDpdOutPfOcts,
        sapEgrEGQueueStDpdOutPfOctsL,
        sapEgrEGQueueStDpdOutPfOctsH,
        sapEgrEGCustId,
        sapEgrEGMbrQueueStFwdInPfPkts,
        sapEgrEGMbrQueueStFwdInPfPktsL,
        sapEgrEGMbrQueueStFwdInPfPktsH,
        sapEgrEGMbrQueueStDpdInPfPkts,
        sapEgrEGMbrQueueStDpdInPfPktsL,
        sapEgrEGMbrQueueStDpdInPfPktsH,
        sapEgrEGMbrQueueStFwdOutPfPkts,
        sapEgrEGMbrQueueStFwdOutPfPktsL,
        sapEgrEGMbrQueueStFwdOutPfPktsH,
        sapEgrEGMbrQueueStDpdOutPfPkts,
        sapEgrEGMbrQueueStDpdOutPfPktsL,
        sapEgrEGMbrQueueStDpdOutPfPktsH,
        sapEgrEGMbrQueueStFwdInPfOcts,
        sapEgrEGMbrQueueStFwdInPfOctsL,
        sapEgrEGMbrQueueStFwdInPfOctsH,
        sapEgrEGMbrQueueStDpdInPfOcts,
        sapEgrEGMbrQueueStDpdInPfOctsL,
        sapEgrEGMbrQueueStDpdInPfOctsH,
        sapEgrEGMbrQueueStFwdOutPfOcts,
        sapEgrEGMbrQueueStFwdOutPfOctsL,
        sapEgrEGMbrQueueStFwdOutPfOctsH,
        sapEgrEGMbrQueueStDpdOutPfOcts,
        sapEgrEGMbrQueueStDpdOutPfOctsL,
        sapEgrEGMbrQueueStDpdOutPfOctsH,
        sapEgrEGMbrQueueCustId,
        sapEgrEGSchedStFwdPkts,
        sapEgrEGSchedStFwdPktsL,
        sapEgrEGSchedStFwdPktsH,
        sapEgrEGSchedStFwdOcts,
        sapEgrEGSchedStFwdOctsL,
        sapEgrEGSchedStFwdOctsH,
        sapEgrEGSchedCustId,
        sapEgrEGMbrSchedStFwdPkts,
        sapEgrEGMbrSchedStFwdPktsL,
        sapEgrEGMbrSchedStFwdPktsH,
        sapEgrEGMbrSchedStFwdOcts,
        sapEgrEGMbrSchedStFwdOctsL,
        sapEgrEGMbrSchedStFwdOctsH,
        sapEgrEGMbrSchedCustId,
        sapPortIdEgrEGSchedFwdPkts,
        sapPortIdEgrEGSchedFwdPktsL,
        sapPortIdEgrEGSchedFwdPktsH,
        sapPortIdEgrEGSchedFwdOcts,
        sapPortIdEgrEGSchedFwdOctsL,
        sapPortIdEgrEGSchedFwdOctsH,
        sapPortIdEgrEGSchedCustId,
        sapPortIdEgrEGMbrSchedFwdPkts,
        sapPortIdEgrEGMbrSchedFwdPktsL,
        sapPortIdEgrEGMbrSchedFwdPktsH,
        sapPortIdEgrEGMbrSchedFwdOcts,
        sapPortIdEgrEGMbrSchedFwdOctsL,
        sapPortIdEgrEGMbrSchedFwdOctsH,
        sapPortIdEgrEGMbrSchedCustId
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP encapsulation group
         on Nokia SROS series systems in release 9.0."
    ::= { tmnxSapGroups 155 }

tmnxSapStaticHostV9v0Group       OBJECT-GROUP
    OBJECTS     {
        sapStaticHostRowStatus,
        sapStaticHostSubscrIdent,
        sapStaticHostSubProfile,
        sapStaticHostSlaProfile,
        sapStaticHostShcvOperState,
        sapStaticHostShcvChecks,
        sapStaticHostShcvReplies,
        sapStaticHostShcvReplyTime,
        sapStaticHostDynMacAddress,
        sapStaticHostRetailerSvcId,
        sapStaticHostRetailerIf,
        sapStaticHostFwdingState,
        sapStaticHostAncpString,
        sapStaticHostSubIdIsSapId,
        sapStaticHostIntermediateDestId,
        sapStaticHostAdminStatus,
        sapStaticHostMRtTblLastChgd,
        sapStaticHostMRtRowStatus,
        sapStaticHostMRtLastMgmtChange,
        sapStaticHostMRtStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP static host
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 156 }

tmnxSapSubMgmtV9v0Group          OBJECT-GROUP
    OBJECTS     {
        sapSubMgmtAdminStatus,
        sapSubMgmtDefSubProfile,
        sapSubMgmtDefSlaProfile,
        sapSubMgmtSubIdentPolicy,
        sapSubMgmtSubscriberLimit,
        sapSubMgmtProfiledTrafficOnly,
        sapSubMgmtNonSubTrafficSubIdent,
        sapSubMgmtNonSubTrafficSubProf,
        sapSubMgmtNonSubTrafficSlaProf,
        sapSubMgmtMacDaHashing,
        sapSubMgmtDefSubIdent,
        sapSubMgmtDefSubIdentString,
        sapSubMgmtDefInterDestId,
        sapSubMgmtDefInterDestIdString
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Sub-management
         capabilities on Nokia SROS series 9.x systems."
    ::= { tmnxSapGroups 157 }

tmnxSapHsmdaV9v0Group            OBJECT-GROUP
    OBJECTS     {
        sapEgrQosHsmdaQueueMBS,
        sapEgrQosHsmdaQueueWrrWeight,
        sapEgressHsmdaWrrPolicyOvr
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Egress QOS Hsmda
         capabilities on Nokia SROS series systems release 9.0."
    ::= { tmnxSapGroups 158 }

tmnxSapDefHostV9v0Group          OBJECT-GROUP
    OBJECTS     {
        sapDefHostTableLastChanged,
        sapDefHostLastChanged,
        sapDefHostRowStatus,
        sapDefHostNextHopIpv4Addr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Default Host SAP
         capabilities on Nokia SROS series 9.x systems."
    ::= { tmnxSapGroups 159 }

tmnxSapFilterProfileV9v0Group    OBJECT-GROUP
    OBJECTS     {
        sapStaticHostFilterProfile,
        sapSubMgmtDefFilterProfile,
        msapPlcySubMgmtDefFilterProfile
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Filter Profiles on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 160 }

tmnxSapV10v0Group                OBJECT-GROUP
    OBJECTS     {
        sapSiteName,
        sapTlsDhcpUserDb,
        sapHostLockoutPolicy,
        sapTlsAutoLearnMacProtect,
        tmnxGreTunnelReassembly,
        tmnxGreTunnelClearDfBit,
        tmnxGreTunnelIpMtu,
        sapIngressFPQGrp,
        sapIngressFPQGrpInstanceId,
        sapIpv6HostInfoIpoeSLAACHosts
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP general capabilities
         on release 10.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 161 }

tmnxSapBsxV10v0Group             OBJECT-GROUP
    OBJECTS     {
        sapAarpId,
        sapAarpServRefType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of BSX (Application
         Assurance) SAP capabilities on Nokia SROS series systems in release
         10.0"
    ::= { tmnxSapGroups 162 }

tmnxSapIgmpTrkV11v0Group         OBJECT-GROUP
    OBJECTS     {
        sapIgmpTrkMaxNbrGrpSrcs
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of IGMP host tracking
         capabilities for SAPs on release 11.0 Nokia SROS series systems."
    ::= { tmnxSapGroups 163 }

tmnxSapMsapV11v0Group            OBJECT-GROUP
    OBJECTS     {
        msapPlcyIgmpTrkMaxNbrGrpSrcs
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of managed SAP capabilities
         on Nokia SROS series systems added in release 11.0."
    ::= { tmnxSapGroups 164 }

tmnxSapDhcpV11v0Group            OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcpStatsClntProxUDBPckts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS DHCP
         capabilities on Nokia SROS series systems added in release 11.0."
    ::= { tmnxSapGroups 165 }

tmnxSapStaticHostV11v0Group      OBJECT-GROUP
    OBJECTS     {
        sapStaticHostAdminRetailSvcId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP static host
         capabilities on Nokia SROS series systems added in release 11.0."
    ::= { tmnxSapGroups 166 }

tmnxSapNotificationObjV6v0Group  OBJECT-GROUP
    OBJECTS     {
        sapNotifyPortId,
        svcManagedSapCreationError,
        msapStatus
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of notifications on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 200 }

tmnxSapNotificationObjV7v0Group  OBJECT-GROUP
    OBJECTS     {
        sapNotifyPortId,
        svcManagedSapCreationError,
        msapStatus,
        sapTlsNotifyMacAddr,
        sapBGPPeeringHostIpAddr,
        sapBGPPeeringHostIpAddrType,
        sapBGPPeeringAttrDiscarded,
        sapBGPPeeringNotifDescription,
        sapBGPPeeringVRtrID,
        sapNotifyEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of notifications on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 201 }

tmnxSapNotifyObjsV8v0R5Group     OBJECT-GROUP
    OBJECTS     {
        sapTunnelNotifyName,
        sapTunnelNotifyReason,
        sapTunnelNotifyState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of notifications on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 202 }

tmnxSapNotificationObjV9v0Group  OBJECT-GROUP
    OBJECTS     {
        sapNotifyReason,
        sapNotifyName,
        sapPppNcpFailureProtocol
    }
    STATUS      current
    DESCRIPTION
        "The group of notification objects added in release 9.0 of Nokia SROS."
    ::= { tmnxSapGroups 203 }

tmnxSapIpipeNotifyObjsGroup      OBJECT-GROUP
    OBJECTS     {
        sapIpipeCeIpAddrType,
        sapIpipeCeIpAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of notifications for Ipipes
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 204 }

tmnxSapRipNotifyObjsGroup        OBJECT-GROUP
    OBJECTS     {
        sapRipListenerHostIpAddr,
        sapRipListenerHostIpAddrType,
        sapRipListenerVRtrID,
        sapRipListenerNotifDescription
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of notifications for RIP
         listener on Nokia SROS series systems."
    ::= { tmnxSapGroups 205 }

tmnxSapDefHostV14v0Group         OBJECT-GROUP
    OBJECTS     {
        sapDefHostExTableLastChanged,
        sapDefHostExRowStatus,
        sapDefHostExLastChanged,
        sapDefHostExNextHopAddrType,
        sapDefHostExNextHopAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Default Host SAP
         capabilities on Nokia SROS series 14.x systems."
    ::= { tmnxSapGroups 206 }

tmnxSapNotificationObjV13v0Group OBJECT-GROUP
    OBJECTS     {
        sapNotifyIpAddrType,
        sapNotifyIpAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of notification objects added in release 13.0 of Nokia SROS."
    ::= { tmnxSapGroups 207 }

tmnxSapObsoletedV6v0Group        OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcpSnooping,
        sapTlsDhcpLseStateRemainLseTime,
        sapTlsDhcpLseStateOption82,
        sapTlsDhcpLseStatePersistKey
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of obsolete objects for the services feature on Nokia SROS
         series systems."
    ::= { tmnxSapGroups 300 }

tmnxSapObsoletedV7v0Group        OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcpSnooping,
        sapTlsDhcpLseStateRemainLseTime,
        sapTlsDhcpLseStateOption82,
        sapTlsDhcpLseStatePersistKey,
        sapAntiSpoofIpAddress,
        sapAntiSpoofMacAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of obsolete objects on Nokia SROS series systems."
    ::= { tmnxSapGroups 301 }

tmnxSapObsoletedV8v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngQosQMBS,
        sapEgrQosQMBS
    }
    STATUS      current
    DESCRIPTION
        "The group of obsolete objects on Nokia SROS series systems."
    ::= { tmnxSapGroups 302 }

tmnxSapNotifyGroup               NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapStatusChanged,
        sapTlsMacAddrLimitAlarmRaised,
        sapTlsMacAddrLimitAlarmCleared,
        sapDHCPLeaseEntriesExceeded,
        sapDHCPLseStateOverride,
        sapDHCPSuspiciousPcktRcvd,
        sapDHCPLseStatePopulateErr,
        hostConnectivityLost,
        hostConnectivityRestored,
        sapReceivedProtSrcMac,
        sapStaticHostDynMacConflict,
        sapTlsMacMoveExceeded,
        sapDHCPProxyServerError,
        sapPortStateChangeProcessed,
        sapDHCPLseStateMobilityError,
        msapStateChanged,
        msapCreationFailure,
        topologyChangeSapMajorState,
        newRootSap,
        topologyChangeSapState,
        receivedTCN,
        higherPriorityBridge,
        sapEncapPVST,
        sapEncapDot1d,
        sapActiveProtocolChange,
        tmnxStpRootGuardViolation,
        tmnxSapStpExcepCondStateChng,
        sapHostBGPPeeringSetupFailed
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications for the Sap feature on Nokia SROS series
         systems."
    ::= { tmnxSapGroups 400 }

tmnxSapCemNotificationV6v0Group  NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapCemPacketDefectAlarm,
        sapCemPacketDefectAlarmClear
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the CEM Sap feature on Nokia
         7710 SR series systems."
    ::= { tmnxSapGroups 401 }

tmnxSapObsoletedNotifyGroup      NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapCreated,
        sapDeleted,
        sapTlsDHCPLseStEntriesExceeded,
        sapTlsDHCPLeaseStateOverride,
        sapTlsDHCPSuspiciousPcktRcvd,
        sapDHCPCoAError,
        sapDHCPSubAuthError,
        bridgedTLS,
        sapReceiveOwnBpdu
    }
    STATUS      current
    DESCRIPTION
        "The group of obsolete notifications for the Sap feature on Nokia SROS
         series systems."
    ::= { tmnxSapGroups 402 }

tmnxSapMvrpNotificationV8v0Group NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapTlsDataSapInstStatusChgd
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the MVRP Sap feature on Nokia
         7710 SR series systems."
    ::= { tmnxSapGroups 403 }

tmnxSapNotificationV8v0Group     NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxGreTunnelOperRemIpChg,
        sapTunnelStateChange
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting the additional SAP feature on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 404 }

tmnxSapEthCfmGroup               OBJECT-GROUP
    OBJECTS     {
        sapEthCfmTblLastChanged,
        sapEthCfmRowLastChanged,
        sapEthCfmTunnelFaultNotification,
        sapEthCfmMcLagPropHoldTimeRemain,
        sapEthCfmAisEnable,
        sapEthCfmVMepFilter
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting Ethernet Connectivity Fault Management
         (CFM) for the SAP feature on Nokia SROS series systems for release
         9.0."
    ::= { tmnxSapGroups 405 }

tmnxSapNotificationV9v0Group     NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapAtmPppSessionFailure,
        sapAtmPppNcpFailure
    }
    STATUS      current
    DESCRIPTION
        "The group of SAP notifications added in release 9.0 of Nokia SROS
         series system."
    ::= { tmnxSapGroups 406 }

tmnxSapIpipeNotificationGroup    NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapIpipeCeIpAddrChange
    }
    STATUS      current
    DESCRIPTION
        "The group of Ipipe SAP notifications for added in the Nokia SROS
         series system."
    ::= { tmnxSapGroups 407 }

tmnxSapSpbGroup                  OBJECT-GROUP
    OBJECTS     {
        sapTlsSpbAdminState,
        sapTlsSpbIfIndex,
        sapTlsSpbLastChgd,
        sapTlsSpbRowStatus,
        sapTlsSpbTblLastChanged
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting Shortest Path Bridging (SPB) for the
         SAP feature on Nokia SROS series systems."
    ::= { tmnxSapGroups 408 }

tmnxSapMonitorIPGroup            OBJECT-GROUP
    OBJECTS     {
        sapCpmProtMonitorIP
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting per-source, per-SAP IP monitoring on
         Nokia SROS series release 9.0 systems."
    ::= { tmnxSapGroups 409 }

tmnxSapV11v0Group                OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcp6AdminState,
        sapTlsDhcp6Description,
        sapTlsDhcp6Snoop,
        sapTlsDhcp6InterfaceId,
        sapTlsDhcp6RemoteId,
        sapTlsDhcp6RemoteIdString,
        sapSiteName,
        sapTlsDhcpUserDb,
        sapHostLockoutPolicy,
        sapTlsAutoLearnMacProtect,
        sapIngressFPQGrp,
        sapIngressFPQGrpInstanceId,
        sapIpv6HostInfoIpoeSLAACHosts,
        sapIgnoreOperDown,
        sapTlsDhcp6UserDb
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting SAP feature on Nokia SROS series
         release 11.0 systems."
    ::= { tmnxSapGroups 410 }

tmnxSapIpTnlGroup                OBJECT-GROUP
    OBJECTS     {
        tmnxIpTnlDstAddrLastChanged,
        tmnxIpTnlDstAddrRowStatus,
        tmnxIpTnlDstAddrTableLastChanged,
        tmnxIpTunnelAdminState,
        tmnxIpTunnelBackupRemIpAddr,
        tmnxIpTunnelBackupRemIpAddrType,
        tmnxIpTunnelBytesRx,
        tmnxIpTunnelBytesRxHi,
        tmnxIpTunnelBytesRxLo,
        tmnxIpTunnelBytesTx,
        tmnxIpTunnelBytesTxHi,
        tmnxIpTunnelBytesTxLo,
        tmnxIpTunnelClearDfBit,
        tmnxIpTunnelDeliverySvcId,
        tmnxIpTunnelDescription,
        tmnxIpTunnelDscp,
        tmnxIpTunnelGreHeader,
        tmnxIpTunnelInvalidChksumRx,
        tmnxIpTunnelInvalidChksumRxHi,
        tmnxIpTunnelInvalidChksumRxLo,
        tmnxIpTunnelIpMtu,
        tmnxIpTunnelKeyIgnoredRx,
        tmnxIpTunnelKeyIgnoredRxHi,
        tmnxIpTunnelKeyIgnoredRxLo,
        tmnxIpTunnelLastChanged,
        tmnxIpTunnelLclIpAddr,
        tmnxIpTunnelLclIpAddrType,
        tmnxIpTunnelLoopsRx,
        tmnxIpTunnelLoopsRxHi,
        tmnxIpTunnelLoopsRxLo,
        tmnxIpTunnelOperFlags,
        tmnxIpTunnelOperRemIpAddr,
        tmnxIpTunnelOperRemIpAddrType,
        tmnxIpTunnelOperState,
        tmnxIpTunnelPktsRx,
        tmnxIpTunnelPktsRxHi,
        tmnxIpTunnelPktsRxLo,
        tmnxIpTunnelPktsTx,
        tmnxIpTunnelPktsTxHi,
        tmnxIpTunnelPktsTxLo,
        tmnxIpTunnelReassembly,
        tmnxIpTunnelRemIpAddr,
        tmnxIpTunnelRemIpAddrType,
        tmnxIpTunnelRowStatus,
        tmnxIpTunnelRxErrors,
        tmnxIpTunnelSeqIgnoredRx,
        tmnxIpTunnelSeqIgnoredRxHi,
        tmnxIpTunnelSeqIgnoredRxLo,
        tmnxIpTunnelTableLastChanged,
        tmnxIpTunnelTooBigTx,
        tmnxIpTunnelTooBigTxHi,
        tmnxIpTunnelTooBigTxLo,
        tmnxIpTunnelTxErrors,
        tmnxIpTunnelVersUnsupRx,
        tmnxIpTunnelVersUnsupRxHi,
        tmnxIpTunnelVersUnsupRxLo,
        tmnxIpTunnelHostISA
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting SAP IP Tunnel feature on Nokia SROS
         series release 10.0 systems."
    ::= { tmnxSapGroups 411 }

tmnxSapGreV10v0Group             OBJECT-GROUP
    OBJECTS     {
        tmnxGreTunnelHostISA
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of additional objects supporting SAP feature on Nokia SROS
         series release 10.0 systems."
    ::= { tmnxSapGroups 412 }

tmnxSapNotificationV10v0Group    NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxIpTunnelOperRemIpChg
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting the additional SAP feature on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 413 }

tmnxSapHsmdaV10v0Group           OBJECT-GROUP
    OBJECTS     {
        sapEgressHsmdaShaperOverride,
        sapIngressHsmdaPacketOffOvr,
        sapEgressHsmdaPacketOffOverride,
        sapEgrQosHsmdaQueueRowStatus,
        sapEgrQosHsmdaQueueLastChanged,
        sapEgrQosHsmdaQueueAdminPIR,
        sapEgrQosHsmdaQueueAdminCIR,
        sapEgrQosHsmdaQueueSlopePolicy,
        sapEgrHsmdaQStatCustId,
        sapEgrHsmdaQStatInProfPktFwd,
        sapEgrHsmdaQStatInProfPktDropd,
        sapEgrHsmdaQStatOutProfPktFwd,
        sapEgrHsmdaQStatOutProfPktDropd,
        sapEgrHsmdaQStatInProfOctFwd,
        sapEgrHsmdaQStatInProfOctDropd,
        sapEgrHsmdaQStatOutProfOctFwd,
        sapEgrHsmdaQStatOutProfOctDropd,
        sapEgrHsmdaCntrStCustId,
        sapEgrHsmdaCntrStInProfPktFwd,
        sapEgrHsmdaCntrStInProfPktDrop,
        sapEgrHsmdaCntrStOutProfPktFwd,
        sapEgrHsmdaCntrStOutProfPktDrop,
        sapEgrHsmdaCntrStInProfOctFwd,
        sapEgrHsmdaCntrStInProfOctDrop,
        sapEgrHsmdaCntrStOutProfOctFwd,
        sapEgrHsmdaCntrStOutProfOctDrop
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         Hsmda capabilities on Nokia SROS series systems in 10.0 release."
    ::= { tmnxSapGroups 414 }

tmnxSapObsoletedV10v0Group       OBJECT-GROUP
    OBJECTS     {
        sapIngressAggRateLimit,
        sapIngressHsmdaPacketOffOvr,
        sapEgrQosHsmdaQueueAdminCIR,
        sapIngHsmdaQStatCustId,
        sapIngHsmdaQStatHiPktsDropped,
        sapIngHsmdaQStatLoPktsDropped,
        sapIngHsmdaQStatHiOctsDropped,
        sapIngHsmdaQStatLoOctsDropped,
        sapIngHsmdaQStatInProfPktsFwd,
        sapIngHsmdaQStatOutProfPktsFwd,
        sapIngHsmdaQStatInProfOctsFwd,
        sapIngHsmdaQStatOutProfOctsFwd,
        sapIngHsmdaQStatAllPktsOffered,
        sapIngHsmdaQStatAllOctsOffered,
        sapIngHsmdaCntrStCustId,
        sapIngHsmdaCntrStHiPktDrop,
        sapIngHsmdaCntrStLoPktDrop,
        sapIngHsmdaCntrStHiOctDrop,
        sapIngHsmdaCntrStLoOctDrop,
        sapIngHsmdaCntrStInProfPktFwd,
        sapIngHsmdaCntrStOutProfPktFwd,
        sapIngHsmdaCntrStInProfOctFwd,
        sapIngHsmdaCntrStOutProfOctFwd,
        sapIngHsmdaCntrStAllPktOffered,
        sapIngHsmdaCntrStAllOctOffered,
        sapIngQosHsmdaQueueRowStatus,
        sapIngQosHsmdaQueueLastChanged,
        sapIngQosHsmdaQueueAdminPIR,
        sapIngQosHsmdaQueueAdminCIR,
        sapIngQosHsmdaQueueSlopePolicy,
        sapTmplIngressAggRateLimit
    }
    STATUS      current
    DESCRIPTION
        "The group of obsolete objects on Nokia SROS series systems in 10.0
         release."
    ::= { tmnxSapGroups 415 }

tmnxSapLagV11v0Group             OBJECT-GROUP
    OBJECTS     {
        sapLagLinkMapProfile,
        sapExtLastChanged,
        sapExtLagActivePort,
        sapExtTableLastChanged,
        msapPlcyLagLinkMapProfile
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting SAP LAG feature on Nokia
         SROS series release 11.0 systems."
    ::= { tmnxSapGroups 416 }

tmnxSapMvrpV10v0Group            OBJECT-GROUP
    OBJECTS     {
        sapTmplLastChanged,
        sapTmplRowStatus,
        sapTmplSapCount,
        sapTmplType,
        sapTmplTblLastChanged,
        sapTmplTlsLastChanged,
        sapTmplTlsMacAgeing,
        sapTmplTlsTblLastChanged,
        sapTlsEsVidGrpEndVlanTag,
        sapTlsEsVidGrpLastChgd,
        sapTlsEsVidGrpRowStatus,
        sapTlsEsVidGrpStartVlanTag,
        sapTlsEsVidGrpTblLastChanged,
        sapTmplUsed,
        sapTmplUserCreationOrigin,
        sapTmplUserCreatorSvcId,
        sapTmplCollectAcctStats,
        sapTmplEgrPolicerPolicy,
        sapTmplEgressAggRateLimit,
        sapTmplEgressFrameBasedAcctg,
        sapTmplEgressIpFilterId,
        sapTmplEgressIpv6FilterId,
        sapTmplEgressMacFilterId,
        sapTmplEgressQinQMarkTopOnly,
        sapTmplEgressQosPolicyId,
        sapTmplEgressQosSchedulerPolicy,
        sapTmplIngPolicerPolicy,
        sapTmplIngUseMultipointShared,
        sapTmplIngressIpFilterId,
        sapTmplIngressIpv6FilterId,
        sapTmplIngressMacFilterId,
        sapTmplIngressMatchQinQDot1PBits,
        sapTmplIngressQosPolicyId,
        sapTmplIngressQosSchedulerPolicy,
        sapTmplIngressSharedQueuePolicy,
        sapTmplTlsBpduTranslation,
        sapTmplTlsDiscardUnknownSource,
        sapTmplTlsL2ptProtocols,
        sapTmplTlsL2ptTermination,
        sapTmplTlsLimitMacMove,
        sapTmplTlsLimitMacMoveLevel,
        sapTmplTlsMacAddressLimit,
        sapTmplTlsMacLearning,
        sapTmplTlsStpAdminPointToPoint,
        sapTmplTlsStpAdminStatus,
        sapTmplTlsStpAutoEdge,
        sapTmplTlsStpBpduEncap,
        sapTmplTlsStpPathCost,
        sapTmplTlsStpPriority,
        sapTmplTlsStpRapidStart,
        sapTmplTlsStpRootGuard,
        sapTmplDot1agCfmMip,
        sapTmplCpmProtPolicyId,
        sapTmplCpmProtMonitorMac,
        sapTlsDataSapInstStatus,
        sapTlsDataSapInstLastErr,
        sapTlsMvrpDeclared,
        sapTlsMvrpEndStation,
        sapTlsMvrpRegistered,
        sapTlsMvrpAdminStatus,
        sapTlsMvrpOperStatus,
        sapTlsInTcBitBpdus,
        sapTlsOutTcBitBpdus
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP MVRP capabilities on
         release 10.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 417 }

tmnxSapFlowSPecV11v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngressFlowspec,
        sapIngressIPv6Flowspec
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting SAP BGP Flow-Spec feature
         on Nokia SROS series release 11.0 systems."
    ::= { tmnxSapGroups 418 }

tmnxSapGreObsoletedGroup         OBJECT-GROUP
    OBJECTS     {
        tmnxGreTunnelAdminState,
        tmnxGreTunnelBackupRemIpAddr,
        tmnxGreTunnelBackupRemIpAddrType,
        tmnxGreTunnelOperRemIpAddr,
        tmnxGreTunnelOperRemIpAddrType,
        tmnxGreTunnelBytesRx,
        tmnxGreTunnelBytesRxHi,
        tmnxGreTunnelBytesRxLo,
        tmnxGreTunnelBytesTx,
        tmnxGreTunnelBytesTxHi,
        tmnxGreTunnelBytesTxLo,
        tmnxGreTunnelDeliverySvcId,
        tmnxGreTunnelDescription,
        tmnxGreTunnelDscp,
        tmnxGreTunnelLastChanged,
        tmnxGreTunnelDstIpAddr,
        tmnxGreTunnelDstIpAddrType,
        tmnxGreTunnelLclIpAddr,
        tmnxGreTunnelLclIpAddrType,
        tmnxGreTunnelOperFlags,
        tmnxGreTunnelOperState,
        tmnxGreTunnelPktsRx,
        tmnxGreTunnelPktsRxHi,
        tmnxGreTunnelPktsRxLo,
        tmnxGreTunnelPktsTx,
        tmnxGreTunnelPktsTxHi,
        tmnxGreTunnelPktsTxLo,
        tmnxGreTunnelRemIpAddr,
        tmnxGreTunnelRemIpAddrType,
        tmnxGreTunnelRowStatus,
        tmnxGreTunnelRxErrors,
        tmnxGreTunnelTableLastChanged,
        tmnxGreTunnelTxErrors,
        tmnxGreTunnelInvalidChksumRx,
        tmnxGreTunnelInvalidChksumRxHi,
        tmnxGreTunnelInvalidChksumRxLo,
        tmnxGreTunnelKeyIgnoredRx,
        tmnxGreTunnelKeyIgnoredRxHi,
        tmnxGreTunnelKeyIgnoredRxLo,
        tmnxGreTunnelLoopsRx,
        tmnxGreTunnelLoopsRxHi,
        tmnxGreTunnelLoopsRxLo,
        tmnxGreTunnelSeqIgnoredRx,
        tmnxGreTunnelSeqIgnoredRxHi,
        tmnxGreTunnelSeqIgnoredRxLo,
        tmnxGreTunnelTooBigTx,
        tmnxGreTunnelTooBigTxHi,
        tmnxGreTunnelTooBigTxLo,
        tmnxGreTunnelVersUnsupRx,
        tmnxGreTunnelVersUnsupRxHi,
        tmnxGreTunnelVersUnsupRxLo,
        tmnxGreTunnelClearDfBit,
        tmnxGreTunnelHostISA,
        tmnxGreTunnelIpMtu,
        tmnxGreTunnelReassembly
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of SAP GRE
         specific capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 419 }

tmnxSapGreV11v0Group             OBJECT-GROUP
    OBJECTS     {
        tmnxSapGreTunnelCount
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP GRE specific
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 420 }

tmnxSapNotifObsoletedGroup       NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxGreTunnelOperRemIpChg
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted notifications supporting the additional SAP
         feature on Nokia SROS series systems."
    ::= { tmnxSapGroups 421 }

tmnxSapNotificationV11v0Group    NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapTunnelStateChange,
        tmnxIpTunnelOperStateChange
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting additional SAP features on Nokia
         SROS series systems release 11.0."
    ::= { tmnxSapGroups 422 }

tmnxSapStatsV10v0Group           OBJECT-GROUP
    OBJECTS     {
        sapBaseStatsIngressCPMPackets,
        sapBaseStatsIngressCPMPacketsHi,
        sapBaseStatsIngressCPMPacketsLo,
        sapBaseStatsIngressCPMOctets,
        sapBaseStatsIngressCPMOctetsHi,
        sapBaseStatsIngressCPMOctetsLo
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting SAP stats feature on Nokia
         SROS series release 10.0 systems."
    ::= { tmnxSapGroups 423 }

tmnxSapDCpuProtV11v0Group        OBJECT-GROUP
    OBJECTS     {
        sapDCpuProtPolicy,
        msapPlcyDCpuProtPolicy,
        sapDcpFpStaticState,
        sapDcpFpStaticExcdCount,
        sapDcpFpStaticExcdCountHi,
        sapDcpFpStaticExcdCountLo,
        sapDcpFpStaticHoldDown,
        sapDcpFpStaticDetectionTime,
        sapDcpFpDynState,
        sapDcpFpDynExcdCount,
        sapDcpFpDynExcdCountHi,
        sapDcpFpDynExcdCountLo,
        sapDcpFpDynHoldDown,
        sapDcpFpDynDetectionTime,
        sapDcpFpDynAllocated,
        sapDcpFpLocMonState,
        sapDcpFpLocMonExcdCount,
        sapDcpFpLocMonExcdCountHi,
        sapDcpFpLocMonExcdCountLo,
        sapDcpFpLocMonAllDynAlloc
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting Distributed Cpu Protection
         feature for SAP on Nokia SROS series release 11.0 systems."
    ::= { tmnxSapGroups 424 }

tmnxSapEgrPortQGrpV11v0Group     OBJECT-GROUP
    OBJECTS     {
        sapEgressPortQGrp,
        sapEgressPortQGrpInstanceId
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting egress port queue-group
         feature for SAP on Nokia SROS series release 11.0 systems."
    ::= { tmnxSapGroups 425 }

tmnxSapDcpNotifyObjsV11v0Group   OBJECT-GROUP
    OBJECTS     {
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Distributed CPU
         Protection feature for SAP on Nokia SROS series release 11.0 systems."
    ::= { tmnxSapGroups 426 }

tmnxSapDcpNotifyV11v0Group       NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapTlsMacMoveExceedNonBlock,
        sapDcpStaticExcd,
        sapDcpDynamicExcd,
        sapDcpStaticHoldDownStart,
        sapDcpDynamicHoldDownStart,
        sapDcpStaticHoldDownEnd,
        sapDcpDynamicHoldDownEnd,
        sapDcpStaticConform,
        sapDcpDynamicConform,
        sapDcpLocMonExcd,
        sapDcpLocMonExcdDynResource,
        sapDcpLocMonExcdAllDynAlloc,
        sapDcpLocMonExcdAllDynFreed,
        sapDcpDynamicEnforceAlloc,
        sapDcpDynamicEnforceFreed
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of Distributed CPU
         Protection feature for SAP on Nokia SROS series release 11.0 systems."
    ::= { tmnxSapGroups 427 }

tmnxSapSchedulerRateV11v0Group   OBJECT-GROUP
    OBJECTS     {
        sapIngQosSPIRHi,
        sapIngQosSPIRLo,
        sapIngQosSCIRHi,
        sapIngQosSCIRLo,
        sapEgrQosSPIRHi,
        sapEgrQosSPIRLo,
        sapEgrQosSCIRHi,
        sapEgrQosSCIRLo
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Scheduler policies on
         Nokia SROS series systems release 11.0."
    ::= { tmnxSapGroups 428 }

tmnxSapSpbV11v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTlsStaticIsidStatus,
        sapTlsStaticIsidRngRowStatus,
        sapTlsStaticIsidRngLastChanged,
        sapTlsStaticIsidRngLow,
        sapTlsStaticIsidRngHigh
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SPB feature on Nokia
         SROS series systems release 11.0."
    ::= { tmnxSapGroups 429 }

tmnxSapEthLoopbackV11v0Group     OBJECT-GROUP
    OBJECTS     {
        sapEthLoopbackRowStatus,
        sapEthLoopbackMode,
        sapEthLoopbackMacSwap,
        sapEthLoopbackMacSwapAddr,
        sapEthLoopbackMacSwapAddrAll
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP Ethernet
         Loopback feature on Nokia SROS series systems in release 11.0."
    ::= { tmnxSapGroups 430 }

tmnxSapEthLpbkNotifyV11v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapEthLoopbackStarted,
        sapEthLoopbackStopped
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of the SAP Ethernet
         Loopback feature on Nokia SROS series systems in release 11.0."
    ::= { tmnxSapGroups 431 }

tmnxSapQosV11v0Group             OBJECT-GROUP
    OBJECTS     {
        sapIngQosQueueId,
        sapIngQosQueueStatsOfferedHiPrioPackets,
        sapIngQosQueueStatsDroppedHiPrioPackets,
        sapIngQosQueueStatsOfferedLoPrioPackets,
        sapIngQosQueueStatsDroppedLoPrioPackets,
        sapIngQosQueueStatsOfferedHiPrioOctets,
        sapIngQosQueueStatsDroppedHiPrioOctets,
        sapIngQosQueueStatsOfferedLoPrioOctets,
        sapIngQosQueueStatsDroppedLoPrioOctets,
        sapIngQosQueueStatsForwardedInProfPackets,
        sapIngQosQueueStatsForwardedOutProfPackets,
        sapIngQosQueueStatsForwardedInProfOctets,
        sapIngQosQueueStatsForwardedOutProfOctets,
        sapIngQosCustId,
        sapIngQosQueueStatsUncoloredPacketsOffered,
        sapIngQosQueueStatsUncoloredOctetsOffered,
        sapEgrQosQueueId,
        sapEgrQosQueueStatsForwardedInProfPackets,
        sapEgrQosQueueStatsDroppedInProfPackets,
        sapEgrQosQueueStatsForwardedOutProfPackets,
        sapEgrQosQueueStatsDroppedOutProfPackets,
        sapEgrQosQueueStatsForwardedInProfOctets,
        sapEgrQosQueueStatsDroppedInProfOctets,
        sapEgrQosQueueStatsForwardedOutProfOctets,
        sapEgrQosQueueStatsDroppedOutProfOctets,
        sapEgrQosCustId,
        sapIngQosSchedStatsForwardedPackets,
        sapIngQosSchedStatsForwardedOctets,
        sapIngQosSchedCustId,
        sapEgrQosSchedStatsForwardedPackets,
        sapEgrQosSchedStatsForwardedOctets,
        sapEgrQosSchedCustId,
        sapIngQosQRowStatus,
        sapIngQosQLastMgmtChange,
        sapIngQosQOverrideFlags,
        sapIngQosQCBS,
        sapIngQosQHiPrioOnly,
        sapIngQosQCIRAdaptation,
        sapIngQosQPIRAdaptation,
        sapIngQosQAdminPIR,
        sapIngQosQAdminCIR,
        sapEgrQosQRowStatus,
        sapEgrQosQLastMgmtChange,
        sapEgrQosQOverrideFlags,
        sapEgrQosQCBS,
        sapEgrQosQHiPrioOnly,
        sapEgrQosQCIRAdaptation,
        sapEgrQosQPIRAdaptation,
        sapEgrQosQAdminPIR,
        sapEgrQosQAdminCIR,
        sapEgrQosQAvgOverhead,
        sapIngQosSRowStatus,
        sapIngQosSLastMgmtChange,
        sapIngQosSOverrideFlags,
        sapIngQosSSummedCIR,
        sapEgrQosSRowStatus,
        sapEgrQosSLastMgmtChange,
        sapEgrQosSOverrideFlags,
        sapEgrQosSSummedCIR,
        sapIngQosPStatsCustId,
        sapIngQosPStatsMode,
        sapIngQosPStatsOffHiPrioPkts,
        sapIngQosPStatsOffHiPrioPktsLo,
        sapIngQosPStatsOffHiPrioPktsHi,
        sapIngQosPStatsDrpHiPrioPkts,
        sapIngQosPStatsDrpHiPrioPktsLo,
        sapIngQosPStatsDrpHiPrioPktsHi,
        sapIngQosPStatsOffLoPrioPkts,
        sapIngQosPStatsOffLoPrioPktsLo,
        sapIngQosPStatsOffLoPrioPktsHi,
        sapIngQosPStatsDrpLoPrioPkts,
        sapIngQosPStatsDrpLoPrioPktsLo,
        sapIngQosPStatsDrpLoPrioPktsHi,
        sapIngQosPStatsOffHiPrioOcts,
        sapIngQosPStatsOffHiPrioOctsLo,
        sapIngQosPStatsOffHiPrioOctsHi,
        sapIngQosPStatsDrpHiPrioOcts,
        sapIngQosPStatsDrpHiPrioOctsLo,
        sapIngQosPStatsDrpHiPrioOctsHi,
        sapIngQosPStatsOffLoPrioOcts,
        sapIngQosPStatsOffLoPrioOctsLo,
        sapIngQosPStatsOffLoPrioOctsHi,
        sapIngQosPStatsDrpLoPrioOcts,
        sapIngQosPStatsDrpLoPrioOctsLo,
        sapIngQosPStatsDrpLoPrioOctsHi,
        sapIngQosPStatsFwdInProfPkts,
        sapIngQosPStatsFwdInProfPktsLo,
        sapIngQosPStatsFwdInProfPktsHi,
        sapIngQosPStatsFwdOutProfPkts,
        sapIngQosPStatsFwdOutProfPktsLo,
        sapIngQosPStatsFwdOutProfPktsHi,
        sapIngQosPStatsFwdInProfOcts,
        sapIngQosPStatsFwdInProfOctsLo,
        sapIngQosPStatsFwdInProfOctsHi,
        sapIngQosPStatsFwdOutProfOcts,
        sapIngQosPStatsFwdOutProfOctsLo,
        sapIngQosPStatsFwdOutProfOctsHi,
        sapIngQosPStatsUncolPktsOff,
        sapIngQosPStatsUncolPktsOffLo,
        sapIngQosPStatsUncolPktsOffHi,
        sapIngQosPStatsUncolOctsOff,
        sapIngQosPStatsUncolOctsOffLo,
        sapIngQosPStatsUncolOctsOffHi,
        sapEgrQosPStatsCustId,
        sapEgrQosPStatsMode,
        sapEgrQosPStatsOffInProfPkts,
        sapEgrQosPStatsOffInProfPktsLo,
        sapEgrQosPStatsOffInProfPktsHi,
        sapEgrQosPStatsFwdInProfPkts,
        sapEgrQosPStatsFwdInProfPktsLo,
        sapEgrQosPStatsFwdInProfPktsHi,
        sapEgrQosPStatsDrpInProfPkts,
        sapEgrQosPStatsDrpInProfPktsLo,
        sapEgrQosPStatsDrpInProfPktsHi,
        sapEgrQosPStatsOffOutProfPkts,
        sapEgrQosPStatsOffOutProfPktsLo,
        sapEgrQosPStatsOffOutProfPktsHi,
        sapEgrQosPStatsFwdOutProfPkts,
        sapEgrQosPStatsFwdOutProfPktsLo,
        sapEgrQosPStatsFwdOutProfPktsHi,
        sapEgrQosPStatsDrpOutProfPkts,
        sapEgrQosPStatsDrpOutProfPktsLo,
        sapEgrQosPStatsDrpOutProfPktsHi,
        sapEgrQosPStatsOffInProfOcts,
        sapEgrQosPStatsOffInProfOctsLo,
        sapEgrQosPStatsOffInProfOctsHi,
        sapEgrQosPStatsFwdInProfOcts,
        sapEgrQosPStatsFwdInProfOctsLo,
        sapEgrQosPStatsFwdInProfOctsHi,
        sapEgrQosPStatsDrpInProfOcts,
        sapEgrQosPStatsDrpInProfOctsLo,
        sapEgrQosPStatsDrpInProfOctsHi,
        sapEgrQosPStatsOffOutProfOcts,
        sapEgrQosPStatsOffOutProfOctsLo,
        sapEgrQosPStatsOffOutProfOctsHi,
        sapEgrQosPStatsFwdOutProfOcts,
        sapEgrQosPStatsFwdOutProfOctsLo,
        sapEgrQosPStatsFwdOutProfOctsHi,
        sapEgrQosPStatsDrpOutProfOcts,
        sapEgrQosPStatsDrpOutProfOctsLo,
        sapEgrQosPStatsDrpOutProfOctsHi,
        sapEgrQosPStatsUncolPktsOff,
        sapEgrQosPStatsUncolPktsOffLo,
        sapEgrQosPStatsUncolPktsOffHi,
        sapEgrQosPStatsUncolOctsOff,
        sapEgrQosPStatsUncolOctsOffLo,
        sapEgrQosPStatsUncolOctsOffHi,
        sapIgQosPlcyPStatCustId,
        sapIgQosPlcyPStatMode,
        sapIgQosPlcyPStatOffHiPrioPkts,
        sapIgQosPlcyPStatDrpHiPrioPkts,
        sapIgQosPlcyPStatOffLoPrioPkts,
        sapIgQosPlcyPStatDrpLoPrioPkts,
        sapIgQosPlcyPStatOffHiPrioOcts,
        sapIgQosPlcyPStatDrpHiPrioOcts,
        sapIgQosPlcyPStatOffLoPrioOcts,
        sapIgQosPlcyPStatDrpLoPrioOcts,
        sapIgQosPlcyPStatFwdInProfPkts,
        sapIgQosPlcyPStatFwdOutProfPkts,
        sapIgQosPlcyPStatFwdInProfOcts,
        sapIgQosPlcyPStatFwdOutProfOcts,
        sapIgQosPlcyPStatUncolPktsOff,
        sapIgQosPlcyPStatUncolOctsOff,
        sapIgQosPlcyPStatOffHiPrioPkts,
        sapIgQosPlcyPStatOffHiPrioPktsL,
        sapIgQosPlcyPStatOffHiPrioPktsH,
        sapIgQosPlcyPStatDrpHiPrioPkts,
        sapIgQosPlcyPStatDrpHiPrioPktsL,
        sapIgQosPlcyPStatDrpHiPrioPktsH,
        sapIgQosPlcyPStatOffLoPrioPkts,
        sapIgQosPlcyPStatOffLoPrioPktsL,
        sapIgQosPlcyPStatOffLoPrioPktsH,
        sapIgQosPlcyPStatDrpLoPrioPkts,
        sapIgQosPlcyPStatDrpLoPrioPktsL,
        sapIgQosPlcyPStatDrpLoPrioPktsH,
        sapIgQosPlcyPStatOffHiPrioOcts,
        sapIgQosPlcyPStatOffHiPrioOctsL,
        sapIgQosPlcyPStatOffHiPrioOctsH,
        sapIgQosPlcyPStatDrpHiPrioOcts,
        sapIgQosPlcyPStatDrpHiPrioOctsL,
        sapIgQosPlcyPStatDrpHiPrioOctsH,
        sapIgQosPlcyPStatOffLoPrioOcts,
        sapIgQosPlcyPStatOffLoPrioOctsL,
        sapIgQosPlcyPStatOffLoPrioOctsH,
        sapIgQosPlcyPStatDrpLoPrioOcts,
        sapIgQosPlcyPStatDrpLoPrioOctsL,
        sapIgQosPlcyPStatDrpLoPrioOctsH,
        sapIgQosPlcyPStatFwdInProfPkts,
        sapIgQosPlcyPStatFwdInProfPktsL,
        sapIgQosPlcyPStatFwdInProfPktsH,
        sapIgQosPlcyPStatFwdOutProfPkts,
        sapIgQosPlcyPStatFwdOutProfPktsL,
        sapIgQosPlcyPStatFwdOutProfPktsH,
        sapIgQosPlcyPStatFwdInProfOcts,
        sapIgQosPlcyPStatFwdInProfOctsL,
        sapIgQosPlcyPStatFwdInProfOctsH,
        sapIgQosPlcyPStatFwdOutProfOcts,
        sapIgQosPlcyPStatFwdOutProfOctsL,
        sapIgQosPlcyPStatFwdOutProfOctsH,
        sapIgQosPlcyPStatUncolPktsOff,
        sapIgQosPlcyPStatUncolPktsOffL,
        sapIgQosPlcyPStatUncolPktsOffH,
        sapIgQosPlcyPStatUncolOctsOff,
        sapIgQosPlcyPStatUncolOctsOffL,
        sapIgQosPlcyPStatUncolOctsOffH,
        sapEgQosPlcyPStatCustId,
        sapEgQosPlcyPStatMode,
        sapEgQosPlcyPStatOffInProfPkts,
        sapEgQosPlcyPStatOffInProfPktsL,
        sapEgQosPlcyPStatOffInProfPktsH,
        sapEgQosPlcyPStatFwdInProfPkts,
        sapEgQosPlcyPStatFwdInProfPktsL,
        sapEgQosPlcyPStatFwdInProfPktsH,
        sapEgQosPlcyPStatDrpInProfPkts,
        sapEgQosPlcyPStatDrpInProfPktsL,
        sapEgQosPlcyPStatDrpInProfPktsH,
        sapEgQosPlcyPStatOffOutProfPkts,
        sapEgQosPlcyPStatOffOutProfPktsL,
        sapEgQosPlcyPStatOffOutProfPktsH,
        sapEgQosPlcyPStatFwdOutProfPkts,
        sapEgQosPlcyPStatFwdOutProfPktsL,
        sapEgQosPlcyPStatFwdOutProfPktsH,
        sapEgQosPlcyPStatDrpOutProfPkts,
        sapEgQosPlcyPStatDrpOutProfPktsL,
        sapEgQosPlcyPStatDrpOutProfPktsH,
        sapEgQosPlcyPStatOffInProfOcts,
        sapEgQosPlcyPStatOffInProfOctsL,
        sapEgQosPlcyPStatOffInProfOctsH,
        sapEgQosPlcyPStatFwdInProfOcts,
        sapEgQosPlcyPStatFwdInProfOctsL,
        sapEgQosPlcyPStatFwdInProfOctsH,
        sapEgQosPlcyPStatDrpInProfOcts,
        sapEgQosPlcyPStatDrpInProfOctsL,
        sapEgQosPlcyPStatDrpInProfOctsH,
        sapEgQosPlcyPStatOffOutProfOcts,
        sapEgQosPlcyPStatOffOutProfOctsL,
        sapEgQosPlcyPStatOffOutProfOctsH,
        sapEgQosPlcyPStatFwdOutProfOcts,
        sapEgQosPlcyPStatFwdOutProfOctsL,
        sapEgQosPlcyPStatFwdOutProfOctsH,
        sapEgQosPlcyPStatDrpOutProfOcts,
        sapEgQosPlcyPStatDrpOutProfOctsL,
        sapEgQosPlcyPStatDrpOutProfOctsH,
        sapEgrQosArbitStatsFwdOcts,
        sapEgrQosArbitStatsFwdOctsHi,
        sapEgrQosArbitStatsFwdOctsLo,
        sapEgrQosArbitStatsFwdPkts,
        sapEgrQosArbitStatsFwdPktsHi,
        sapEgrQosArbitStatsFwdPktsLo,
        sapIngQosArbitStatsFwdOcts,
        sapIngQosArbitStatsFwdOctsHi,
        sapIngQosArbitStatsFwdOctsLo,
        sapIngQosArbitStatsFwdPkts,
        sapIngQosArbitStatsFwdPktsHi,
        sapIngQosArbitStatsFwdPktsLo,
        sapPortIdEgrQosArbitFwdOcts,
        sapPortIdEgrQosArbitFwdOctsHi,
        sapPortIdEgrQosArbitFwdOctsLo,
        sapPortIdEgrQosArbitFwdPkts,
        sapPortIdEgrQosArbitFwdPktsHi,
        sapPortIdEgrQosArbitFwdPktsLo,
        sapPortIdIngQosArbitFwdOcts,
        sapPortIdIngQosArbitFwdOctsHi,
        sapPortIdIngQosArbitFwdOctsLo,
        sapPortIdIngQosArbitFwdPkts,
        sapPortIdIngQosArbitFwdPktsHi,
        sapPortIdIngQosArbitFwdPktsLo
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 432 }

tmnxSapQosObsoletedV11v0Group    OBJECT-GROUP
    OBJECTS     {
        sapIngQosSPIR,
        sapIngQosSCIR,
        sapEgrQosSPIR,
        sapEgrQosSCIR
    }
    STATUS      current
    DESCRIPTION
        "The group of objects obsoleted supporting management of SAP
         Ingress/Egress QoS capabilities on Nokia SROS series systems release
         11.0."
    ::= { tmnxSapGroups 433 }

tmnxSapCflowdGroupV11v0          OBJECT-GROUP
    OBJECTS     {
        sapCflowd
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects for the management of Cflowd sampling
         on SAPs for release 11.0 of the SROS series systems."
    ::= { tmnxSapGroups 435 }

sapTlsFdbMacStatsGroup           OBJECT-GROUP
    OBJECTS     {
        sapTlsFdbMacStatsNumEntries
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects for the management of Cflowd sampling
         on SAPs for release 11.0 of the SROS series systems."
    ::= { tmnxSapGroups 436 }

sapTlsEtreeGroup                 OBJECT-GROUP
    OBJECTS     {
        sapEtreeRootLeafTag,
        sapEtreeLeafTag,
        sapEtreeLeafAc
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting ETree feature for SAPs on Nokia SROS
         series systems."
    ::= { tmnxSapGroups 437 }

tmnxMsapPlcyCpmProtV12v0Group    OBJECT-GROUP
    OBJECTS     {
        msapPlcyCpmProtMonitorIP
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of CPM Protection on MSAP
         Policy for release 12.0 of the SROS series systems."
    ::= { tmnxSapGroups 438 }

tmnxSapTlsV12v0Group             OBJECT-GROUP
    OBJECTS     {
        tmnxSapTlsExLastChanged,
        tmnxSapTlsExDhcpPythonPolicy,
        tmnxSapTlsExDhcp6PythonPolicy,
        tmnxSapTlsExRtrSolMsapTrigger,
        tmnxSapTlsExRtrSolUserDb
    }
    STATUS      current
    DESCRIPTION
        "The group of new objects supporting management of SAPS for release
         12.0 of the SROS series systems."
    ::= { tmnxSapGroups 439 }

tmnxSapQosV12v0Group             OBJECT-GROUP
    OBJECTS     {
        sapEgressAggRateLUB,
        sapEgrEncapGroupAggRateLUB,
        sapTmplEgrAggRateLUB
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP QoS capabilities for
         release 12.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 440 }

tmnxSapEthCfmV12v0Group          OBJECT-GROUP
    OBJECTS     {
        sapEthCfmSquelchIngress,
        sapTmplEthCfmSquelchIngress,
        sapEthCfmCollectLmmStats
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting Ethernet Connectivity Fault
         Management (ETH-CFM) for the SAP feature on Nokia SROS series systems
         for release 12.0."
    ::= { tmnxSapGroups 441 }

tmnxIpTunnelV12v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelEncapIpMtu,
        tmnxIpTunnelIcmp6Pkt2Big,
        tmnxIpTunnelIcmp6NumPkt2Big,
        tmnxIpTunnelIcmp6Pkt2BigTime,
        tmnxIpTnlDstAddrResolved
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for IP Tunnel feature on Nokia SROS series
         systems in 12.0 release."
    ::= { tmnxSapGroups 442 }

tmnxIPTunnelPMTUV21v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelPropagateIpv6PMTU,
        tmnxIpTunnelPropagateIpv4PMTU,
        tmnxIpTunnelIcmpFragReq,
        tmnxIpTunnelIcmpFragReqNum,
        tmnxIpTunnelIcmpFragReqTime,
        tmnxIpTunnelPMTUDiscoverAging,
        tmnxIpTunnelTempPrivMtu
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for IP Tunnel PMTU feature on Nokia SROS series
         systems in 21.0 release."
    ::= { tmnxSapGroups 443 }

sapLagV12v0Group                 OBJECT-GROUP
    OBJECTS     {
        sapLagPerLinkHashClass,
        sapLagPerLinkHashWeight,
        sapLagPerLinkHashOperClass,
        sapLagPerLinkHashOperWeight,
        sapLagPerLinkHashIsOverriden,
        sapLagPerLinkHashLastChanged,
        sapLagPerLinkHashTableLastChgd
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for SAP per-link-hash feature on Nokia SROS
         series systems in 12.0 release."
    ::= { tmnxSapGroups 444 }

tmnxIPTunnelGreKeyV12v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelGreHeaderSendKey,
        tmnxIpTunnelGreHeaderRcvKey,
        tmnxIpTunnelGreHeaderKeysSet,
        tmnxIpTunnelKeyMismatchRx
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for SAP gre key feature on Nokia SROS series
         systems in 12.0 release."
    ::= { tmnxSapGroups 445 }

tmnxIpTunnelFragStatV12v0Group   OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelEncapOverhead,
        tmnxIpTunnelPreEncapFragCount,
        tmnxIpTunnelPreEncapFragLastSize,
        tmnxIpTunnelPostEncapFragCount,
        tmnxIpTunnelPostEncapFragLstSize
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for fragmentation statistics for Gre IP-in-IP
         tunnel feature on Nokia SROS series systems in 12.0 release."
    ::= { tmnxSapGroups 446 }

tmnxIpTunnelEncapNotifyGroup     NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapTunnelEncapIpMtuTooSmall
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting Gre/IP-in-IP Tunnels
         encapsulation feature on Nokia SROS series systems in release 12.0."
    ::= { tmnxSapGroups 447 }

tmnxIpTunnelEncaNotifyObjsGroup  OBJECT-GROUP
    OBJECTS     {
        sapTunnelNotifyConfigIpMtu,
        sapTunnelNotifyEncapOverhead,
        sapTunnelNotifyConfigEncapIpMtu
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for Gre IP-in-IP tunnel encapsulation trap on
         Nokia SROS series systems in 12.0 release."
    ::= { tmnxSapGroups 448 }

tmnxSapPbbV12v0Group             OBJECT-GROUP
    OBJECTS     {
        sapPbbMldSnpgMRouter
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Provider Backbone
         Bridging (PBB/IEEE 802.1ah) capabilities for SAPs on Nokia SROS series
         systems in 12.0 release."
    ::= { tmnxSapGroups 449 }

tmnxMsapQosV12v0Group            OBJECT-GROUP
    OBJECTS     {
        msapTlsPlcyIngQosPolicyId,
        msapTlsPlcyIngQosQueueingType,
        msapL3PlcyIngQosPolicyId,
        msapL3PlcyIngQosQueueingType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of MSAP QoS capabilities
         for release 12.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 450 }

tmnxIpTnlOperChgGroup            OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelOperChanged
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for new statistics of outbound SA feature on
         Nokia SROS series systems in 10.0 release."
    ::= { tmnxSapGroups 451 }

tmnxSapMsapV12v0Group            OBJECT-GROUP
    OBJECTS     {
        msapTlsPlcyIgmpSnpgMcacUsePortWt
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of MSAP added in release
         12.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 452 }

tmnxSapIpoeV13v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxSapIpoeTableLastChanged,
        tmnxSapIpoeLastChanged,
        tmnxSapIpoeAdminState,
        tmnxSapIpoeDescription,
        tmnxSapIpoePolicy,
        tmnxSapIpoeUserDb
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of IPoE session on SAP
         added in release 13.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 453 }

tmnxSapStatHost6Group            OBJECT-GROUP
    OBJECTS     {
        sapStatHostMacLearnOptions,
        sapStatHost6TableLastChanged,
        sapStatHost6LastChanged,
        sapStatHost6RowStatus,
        sapStatHost6AdminStatus,
        sapStatHost6PrefixLen,
        sapStatHost6NextHopAddrType,
        sapStatHost6NextHopAddr,
        sapStatHost6SubscrIdent,
        sapStatHost6SubProfile,
        sapStatHost6SlaProfile,
        sapStatHost6ShcvOperState,
        sapStatHost6ShcvChecks,
        sapStatHost6ShcvReplies,
        sapStatHost6ShcvReplyTime,
        sapStatHost6DynMacAddress,
        sapStatHost6RetailerSvcId,
        sapStatHost6RetailerIf,
        sapStatHost6FwdingState,
        sapStatHost6AncpString,
        sapStatHost6SubIdIsSapId,
        sapStatHost6AppProfile,
        sapStatHost6IntermediateDestId,
        sapStatHost6MRtTblLastChgd,
        sapStatHost6MRtRowStatus,
        sapStatHost6MRtLastMgmtChange,
        sapStatHost6MRtStatus,
        sapStatHost6MRtMetric,
        sapIpv6HostInfoStaticHostsUp,
        tmnxSapDataTrigStatsName,
        tmnxSapDataTrigStatsVal
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of static IPv6 hosts on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 454 }

tmnxSapDnGroup                   OBJECT-GROUP
    OBJECTS     {
        tmnxSapTlsExProcCpmTrfcSapDn
    }
    STATUS      current
    DESCRIPTION
        "The tmnxSapDnGroup maintains additional vpls sap information on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 455 }

tmnxSapQosSchedV13v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngQosSParentWeight,
        sapIngQosSParentCIRWeight,
        sapEgrQosSParentWeight,
        sapEgrQosSParentCIRWeight
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Qos scheduler overrides
         on SAP for release 13.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 456 }

tmnxSapIpipeFaultPropGroup       OBJECT-GROUP
    OBJECTS     {
        sapIpipeLegacyFaultNotification,
        sapIpipeRemainRecoveryTimer
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of IPIPE fault propagation
         on SAP for release 13.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 457 }

tmnxSapStaticHostRipV13v0Group   OBJECT-GROUP
    OBJECTS     {
        sapStaticHostRipPolicy,
        sapStaticHostRipPlcyName,
        sapStaticHostRipListenerStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP static host
         RIP/RIP-NG policies on Nokia SROS series systems added in release
         13.0."
    ::= { tmnxSapGroups 458 }

tmnxSapBaseStatsV13v0Group       OBJECT-GROUP
    OBJECTS     {
        sapBaseStatsIngPchipRcvdValidPkt,
        sapBaseStatsIngPchipRcvdValidOct
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP base statistics on
         Nokia SROS series systems release 13.0."
    ::= { tmnxSapGroups 459 }

tmnxSapQueueOvrV13v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngQosQMonitorDepth,
        sapEgrQosQMonitorDepth,
        sapIngQosQueueDepthPollPrcnt1,
        sapIngQosQueueDepthPollPrcnt2,
        sapIngQosQueueDepthPollPrcnt3,
        sapIngQosQueueDepthPollPrcnt4,
        sapIngQosQueueDepthPollPrcnt5,
        sapIngQosQueueDepthPollPrcnt6,
        sapIngQosQueueDepthPollPrcnt7,
        sapIngQosQueueDepthPollPrcnt8,
        sapIngQosQueueDepthPollPrcnt9,
        sapIngQosQueueDepthPollPrcnt10,
        sapIngQosQueueDepthAvgPollInt,
        sapIngQosQueueDepthAvgElpsdTme,
        sapEgrQosQueueDepthPollPrcnt1,
        sapEgrQosQueueDepthPollPrcnt2,
        sapEgrQosQueueDepthPollPrcnt3,
        sapEgrQosQueueDepthPollPrcnt4,
        sapEgrQosQueueDepthPollPrcnt5,
        sapEgrQosQueueDepthPollPrcnt6,
        sapEgrQosQueueDepthPollPrcnt7,
        sapEgrQosQueueDepthPollPrcnt8,
        sapEgrQosQueueDepthPollPrcnt9,
        sapEgrQosQueueDepthPollPrcnt10,
        sapEgrQosQueueDepthAvgPollInt,
        sapEgrQosQueueDepthAvgElpsdTme
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting QoS queue-overrides on SAP in release
         13.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 460 }

tmnxSapStatHost6V13v0Group       OBJECT-GROUP
    OBJECTS     {
        sapStatHost6AdminRetailSvcId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of static IPv6 hosts on
         release 13.0 Nokia SROS series systems."
    ::= { tmnxSapGroups 462 }

tmnxSapDiamNasreqGroup           OBJECT-GROUP
    OBJECTS     {
        tmnxSapTlsExDiameterAuthPolicy
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of static IPv6 hosts on
         release 13.0 Nokia SROS series systems."
    ::= { tmnxSapGroups 463 }

tmnxSapRipNotifyGroup            NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapHostRipListenerSetupFailed
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications for the Rip Listener feature on Nokia SROS
         series systems."
    ::= { tmnxSapGroups 464 }

tmnxSapQosRateV13v0Group         OBJECT-GROUP
    OBJECTS     {
        sapEgressAggRateLmt,
        sapTmplEgrAggRateLimit,
        sapEgrEncapGrpAggRateLimit
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP QoS capabilities for
         release 13.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 465 }

tmnxSapDhcpV13v0Group            OBJECT-GROUP
    OBJECTS     {
        sapTlsDhcpStatsClntProxNqPckts,
        sapTlsDhcpRemoteIdHex,
        sapTlsDhcpCircuitIdHex
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS DHCP
         capabilities on Nokia SROS series systems added in release 13.0."
    ::= { tmnxSapGroups 466 }

tmnxSapShcvPolicyGroup           OBJECT-GROUP
    OBJECTS     {
        sapTlsShcvPolicyIpv4
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Subscriber Host
         Connectivity Verification (SHCV) policies on Nokia SROS series
         systems."
    ::= { tmnxSapGroups 467 }

tmnxSapNotificationV13v0Group    NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapStatHost6DynMacConflict
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications about SAPs added in release 13.0 of the
         Nokia SROS series systems."
    ::= { tmnxSapGroups 476 }

tmnxSapV13v0Group                OBJECT-GROUP
    OBJECTS     {
        sapNumEntries,
        sapPortId,
        sapEncapValue,
        sapRowStatus,
        sapType,
        sapDescription,
        sapAdminStatus,
        sapOperStatus,
        sapIngressQosPolicyId,
        sapIngressMacFilterId,
        sapIngressIpFilterId,
        sapIngressVlanTranslationId,
        sapEgressQosPolicyId,
        sapEgressMacFilterId,
        sapEgressIpFilterId,
        sapMirrorStatus,
        sapIesIfIndex,
        sapLastMgmtChange,
        sapCollectAcctStats,
        sapAccountingPolicyId,
        sapVpnId,
        sapCustId,
        sapCustMultSvcSite,
        sapIngressQosSchedulerPolicy,
        sapEgressQosSchedulerPolicy,
        sapSplitHorizonGrp,
        sapIngressSharedQueuePolicy,
        sapIngressMatchQinQDot1PBits,
        sapOperFlags,
        sapLastStatusChange,
        sapAntiSpoofing,
        sapTodSuite,
        sapIngUseMultipointShared,
        sapEgressQinQMarkTopOnly,
        sapEndPoint,
        sapIngressVlanTranslation,
        sapSubType,
        sapCpmProtPolicyId,
        sapCpmProtMonitorMac,
        sapEgressFrameBasedAccounting,
        sapEthernetLLFAdminStatus,
        sapEthernetLLFOperStatus,
        sapTlsMvplsRowStatus,
        sapEgressFrameBasedAccounting,
        sapCallingStationId,
        sapIngPolicerPolicy,
        sapEgrPolicerPolicy,
        sapIpv6HostInfoIpoeDhcp6Hosts,
        sapIpv6HostInfoPppDhcp6Hosts,
        sapIpv6HostInfoPppSLAACHosts,
        sapIngQosQMBSBytes,
        sapEgrQosQMBSBytes
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP capabilities for
         13.0 release on Nokia SROS series systems."
    ::= { tmnxSapGroups 477 }

tmnxSapMvrpV13v0Group            OBJECT-GROUP
    OBJECTS     {
        sapTmplLastChanged,
        sapTmplRowStatus,
        sapTmplSapCount,
        sapTmplType,
        sapTmplTblLastChanged,
        sapTmplTlsLastChanged,
        sapTmplTlsMacAgeing,
        sapTmplTlsTblLastChanged,
        sapTlsEsVidGrpEndVlanTag,
        sapTlsEsVidGrpLastChgd,
        sapTlsEsVidGrpRowStatus,
        sapTlsEsVidGrpStartVlanTag,
        sapTlsEsVidGrpTblLastChanged,
        sapTmplUsed,
        sapTmplUserCreationOrigin,
        sapTmplUserCreatorSvcId,
        sapTmplCollectAcctStats,
        sapTmplEgrPolicerPolicy,
        sapTmplEgressFrameBasedAcctg,
        sapTmplEgressIpFilterId,
        sapTmplEgressIpv6FilterId,
        sapTmplEgressMacFilterId,
        sapTmplEgressQinQMarkTopOnly,
        sapTmplEgressQosPolicyId,
        sapTmplEgressQosSchedulerPolicy,
        sapTmplIngPolicerPolicy,
        sapTmplIngUseMultipointShared,
        sapTmplIngressIpFilterId,
        sapTmplIngressIpv6FilterId,
        sapTmplIngressMacFilterId,
        sapTmplIngressMatchQinQDot1PBits,
        sapTmplIngressQosPolicyId,
        sapTmplIngressQosSchedulerPolicy,
        sapTmplIngressSharedQueuePolicy,
        sapTmplTlsBpduTranslation,
        sapTmplTlsDiscardUnknownSource,
        sapTmplTlsL2ptProtocols,
        sapTmplTlsL2ptTermination,
        sapTmplTlsLimitMacMove,
        sapTmplTlsLimitMacMoveLevel,
        sapTmplTlsMacAddressLimit,
        sapTmplTlsMacLearning,
        sapTmplTlsStpAdminPointToPoint,
        sapTmplTlsStpAdminStatus,
        sapTmplTlsStpAutoEdge,
        sapTmplTlsStpBpduEncap,
        sapTmplTlsStpPathCost,
        sapTmplTlsStpPriority,
        sapTmplTlsStpRapidStart,
        sapTmplTlsStpRootGuard,
        sapTmplDot1agCfmMip,
        sapTmplCpmProtPolicyId,
        sapTmplCpmProtMonitorMac,
        sapTlsDataSapInstStatus,
        sapTlsDataSapInstLastErr,
        sapTlsMvrpDeclared,
        sapTlsMvrpEndStation,
        sapTlsMvrpRegistered,
        sapTlsMvrpAdminStatus,
        sapTlsMvrpOperStatus,
        sapTlsInTcBitBpdus,
        sapTlsOutTcBitBpdus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP MVRP capabilities on
         release 13.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 478 }

tmnxSapEgrEncapGrpV13v0Group     OBJECT-GROUP
    OBJECTS     {
        sapEgrEncapGroupTblLastChgd,
        sapEgrEncapGroupRowStatus,
        sapEgrEncapGroupLastChanged,
        sapEgrEncapGroupType,
        sapEgrEncapGroupQosPerMember,
        sapEgrEncapGroupQosPolicyId,
        sapEgrEncapGroupSchedulerPolicy,
        sapEgrEncapGrpFrameBasedAccnt,
        sapEgrEncapGrpMemActTblLastChgd,
        sapEgrEncapGroupBeginMember,
        sapEgrEncapGroupEndMember,
        sapEgrEncapGroupMemberAction,
        sapEgrEncapGrpRangeEndId,
        sapEgrEncapGrpMemberLastChanged,
        sapEgrEGBaseStLastClearedTime,
        sapEgrEGBaseStCustId,
        sapEgrEGBaseStQcDpdInPfPkts,
        sapEgrEGBaseStQcDpdInPfPkts,
        sapEgrEGBaseStQcDpdInPfPktsL,
        sapEgrEGBaseStQcDpdInPfPktsH,
        sapEgrEGBaseStQcDpdInPfOcts,
        sapEgrEGBaseStQcDpdInPfOctsL,
        sapEgrEGBaseStQcDpdInPfOctsH,
        sapEgrEGBaseStQcDpdOutPfPkts,
        sapEgrEGBaseStQcDpdOutPfPktsL,
        sapEgrEGBaseStQcDpdOutPfPktsH,
        sapEgrEGBaseStQcDpdOutPfOcts,
        sapEgrEGBaseStQcDpdOutPfOctsL,
        sapEgrEGBaseStQcDpdOutPfOctsH,
        sapEgrEGBaseStQcFwdInPfPkts,
        sapEgrEGBaseStQcFwdInPfPktsL,
        sapEgrEGBaseStQcFwdInPfPktsH,
        sapEgrEGBaseStQcFwdInPfOcts,
        sapEgrEGBaseStQcFwdInPfOctsL,
        sapEgrEGBaseStQcFwdInPfOctsH,
        sapEgrEGBaseStQcFwdOutPfPkts,
        sapEgrEGBaseStQcFwdOutPfPktsL,
        sapEgrEGBaseStQcFwdOutPfPktsH,
        sapEgrEGBaseStQcFwdOutPfOcts,
        sapEgrEGBaseStQcFwdOutPfOctsL,
        sapEgrEGBaseStQcFwdOutPfOctsH,
        sapEgrEGMbrBaseStQcDpdInPfPkts,
        sapEgrEGMbrBaseStQcDpdInPfPktsL,
        sapEgrEGMbrBaseStQcDpdInPfPktsH,
        sapEgrEGMbrBaseStQcDpdInPfOcts,
        sapEgrEGMbrBaseStQcDpdInPfOctsL,
        sapEgrEGMbrBaseStQcDpdInPfOctsH,
        sapEgrEGMbrBaseStQcDpdOutPfPkts,
        sapEgrEGMbrBaseStQcDpdOutPfPktsL,
        sapEgrEGMbrBaseStQcDpdOutPfPktsH,
        sapEgrEGMbrBaseStQcDpdOutPfOcts,
        sapEgrEGMbrBaseStQcDpdOutPfOctsL,
        sapEgrEGMbrBaseStQcDpdOutPfOctsH,
        sapEgrEGMbrBaseStQcFwdInPfPkts,
        sapEgrEGMbrBaseStQcFwdInPfPktsL,
        sapEgrEGMbrBaseStQcFwdInPfPktsH,
        sapEgrEGMbrBaseStQcFwdInPfOcts,
        sapEgrEGMbrBaseStQcFwdInPfOctsL,
        sapEgrEGMbrBaseStQcFwdInPfOctsH,
        sapEgrEGMbrBaseStQcFwdOutPfPkts,
        sapEgrEGMbrBaseStQcFwdOutPfPktsL,
        sapEgrEGMbrBaseStQcFwdOutPfPktsH,
        sapEgrEGMbrBaseStQcFwdOutPfOcts,
        sapEgrEGMbrBaseStQcFwdOutPfOctsL,
        sapEgrEGMbrBaseStQcFwdOutPfOctsH,
        sapEgrEGMbrBaseStLstClearedTime,
        sapEgrEGMbrBaseStCustId,
        sapEgrEGQueueStFwdInPfPkts,
        sapEgrEGQueueStFwdInPfPktsL,
        sapEgrEGQueueStFwdInPfPktsH,
        sapEgrEGQueueStDpdInPfPkts,
        sapEgrEGQueueStDpdInPfPktsL,
        sapEgrEGQueueStDpdInPfPktsH,
        sapEgrEGQueueStFwdOutPfPkts,
        sapEgrEGQueueStFwdOutPfPktsL,
        sapEgrEGQueueStFwdOutPfPktsH,
        sapEgrEGQueueStDpdOutPfPkts,
        sapEgrEGQueueStDpdOutPfPktsL,
        sapEgrEGQueueStDpdOutPfPktsH,
        sapEgrEGQueueStFwdInPfOcts,
        sapEgrEGQueueStFwdInPfOctsL,
        sapEgrEGQueueStFwdInPfOctsH,
        sapEgrEGQueueStDpdInPfOcts,
        sapEgrEGQueueStDpdInPfOctsL,
        sapEgrEGQueueStDpdInPfOctsH,
        sapEgrEGQueueStFwdOutPfOcts,
        sapEgrEGQueueStFwdOutPfOctsL,
        sapEgrEGQueueStFwdOutPfOctsH,
        sapEgrEGQueueStDpdOutPfOcts,
        sapEgrEGQueueStDpdOutPfOctsL,
        sapEgrEGQueueStDpdOutPfOctsH,
        sapEgrEGCustId,
        sapEgrEGMbrQueueStFwdInPfPkts,
        sapEgrEGMbrQueueStFwdInPfPktsL,
        sapEgrEGMbrQueueStFwdInPfPktsH,
        sapEgrEGMbrQueueStDpdInPfPkts,
        sapEgrEGMbrQueueStDpdInPfPktsL,
        sapEgrEGMbrQueueStDpdInPfPktsH,
        sapEgrEGMbrQueueStFwdOutPfPkts,
        sapEgrEGMbrQueueStFwdOutPfPktsL,
        sapEgrEGMbrQueueStFwdOutPfPktsH,
        sapEgrEGMbrQueueStDpdOutPfPkts,
        sapEgrEGMbrQueueStDpdOutPfPktsL,
        sapEgrEGMbrQueueStDpdOutPfPktsH,
        sapEgrEGMbrQueueStFwdInPfOcts,
        sapEgrEGMbrQueueStFwdInPfOctsL,
        sapEgrEGMbrQueueStFwdInPfOctsH,
        sapEgrEGMbrQueueStDpdInPfOcts,
        sapEgrEGMbrQueueStDpdInPfOctsL,
        sapEgrEGMbrQueueStDpdInPfOctsH,
        sapEgrEGMbrQueueStFwdOutPfOcts,
        sapEgrEGMbrQueueStFwdOutPfOctsL,
        sapEgrEGMbrQueueStFwdOutPfOctsH,
        sapEgrEGMbrQueueStDpdOutPfOcts,
        sapEgrEGMbrQueueStDpdOutPfOctsL,
        sapEgrEGMbrQueueStDpdOutPfOctsH,
        sapEgrEGMbrQueueCustId,
        sapEgrEGSchedStFwdPkts,
        sapEgrEGSchedStFwdPktsL,
        sapEgrEGSchedStFwdPktsH,
        sapEgrEGSchedStFwdOcts,
        sapEgrEGSchedStFwdOctsL,
        sapEgrEGSchedStFwdOctsH,
        sapEgrEGSchedCustId,
        sapEgrEGMbrSchedStFwdPkts,
        sapEgrEGMbrSchedStFwdPktsL,
        sapEgrEGMbrSchedStFwdPktsH,
        sapEgrEGMbrSchedStFwdOcts,
        sapEgrEGMbrSchedStFwdOctsL,
        sapEgrEGMbrSchedStFwdOctsH,
        sapEgrEGMbrSchedCustId,
        sapPortIdEgrEGSchedFwdPkts,
        sapPortIdEgrEGSchedFwdPktsL,
        sapPortIdEgrEGSchedFwdPktsH,
        sapPortIdEgrEGSchedFwdOcts,
        sapPortIdEgrEGSchedFwdOctsL,
        sapPortIdEgrEGSchedFwdOctsH,
        sapPortIdEgrEGSchedCustId,
        sapPortIdEgrEGMbrSchedFwdPkts,
        sapPortIdEgrEGMbrSchedFwdPktsL,
        sapPortIdEgrEGMbrSchedFwdPktsH,
        sapPortIdEgrEGMbrSchedFwdOcts,
        sapPortIdEgrEGMbrSchedFwdOctsL,
        sapPortIdEgrEGMbrSchedFwdOctsH,
        sapPortIdEgrEGMbrSchedCustId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP encapsulation group
         on Nokia SROS series systems in release 13.0."
    ::= { tmnxSapGroups 479 }

tmnxSapObsoletedV13v0Group       OBJECT-GROUP
    OBJECTS     {
        sapEgressAggRateLimit,
        sapTmplEgressAggRateLimit,
        sapEgrEncapGroupAggRateLimit
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of SAP
         capabilities for 13.0 release on Nokia SROS series systems."
    ::= { tmnxSapGroups 480 }

sapBgpEvpnMplsMhGroup            OBJECT-GROUP
    OBJECTS     {
        sapEvpnMHEthSegName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting SAP BGP EVPN (Ethernet - VPN) MPLS
         Multi Home feature on Nokia SROS series systems release 13.0."
    ::= { tmnxSapGroups 481 }

tmnxSapV14v0Group                OBJECT-GROUP
    OBJECTS     {
        sapTlsDataMsapTrigger,
        tmnxSapTlsExPppoePythonPolicy,
        tmnxSapTlsExAllowDot1qMsap,
        sapBandwidth
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP general capabilities
         added in release 14.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 482 }

tmnxSapMsapV14v0Group            OBJECT-GROUP
    OBJECTS     {
        msapTlsPlcyIgmpSnpgMcIfPlcyName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of MSAP added in release
         14.0 on Nokia SROS series systems."
    ::= { tmnxSapGroups 483 }

tmnxSapVplsV14v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxSapTlsExEgressDestMac
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of VPLS SAP capabilities
         added in release 14.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 484 }

tmnxSapQosStatsGroup             OBJECT-GROUP
    OBJECTS     {
        sapEgrQosPStatsFwdExdProfPkts,
        sapEgrQosPStatsDrpExdProfPkts,
        sapEgrQosPStatsFwdExdProfOcts,
        sapEgrQosPStatsDrpExdProfOcts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Egress QoS
         statistics capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 485 }

tmnxSapStickyMsapGroup           OBJECT-GROUP
    OBJECTS     {
        msapPlcySticky,
        msapInfoIsIdle,
        msapInfoIsSticky
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of sticky managed SAPs on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 486 }

tmnxEvpnMplsMacMovNotifGroup     NOTIFICATION-GROUP
    NOTIFICATIONS {
        svcEvpnMplsMacMoveExceedNonBlock
    }
    STATUS      current
    DESCRIPTION
        "The group notifications supporting BGP EVPN MPLS feature on Nokia SROS
         series systems release 13.0."
    ::= { tmnxSapGroups 487 }

tmnxSapInfoV14v0Group            OBJECT-GROUP
    OBJECTS     {
        sapNumEntries,
        sapPortId,
        sapEncapValue,
        sapRowStatus,
        sapType,
        sapDescription,
        sapAdminStatus,
        sapOperStatus,
        sapIngressQosPolicyId,
        sapIngressMacFilterId,
        sapIngressIpFilterId,
        sapIngressVlanTranslationId,
        sapEgressQosPolicyId,
        sapEgressMacFilterId,
        sapEgressIpFilterId,
        sapMirrorStatus,
        sapIesIfIndex,
        sapLastMgmtChange,
        sapCollectAcctStats,
        sapAccountingPolicyId,
        sapVpnId,
        sapCustId,
        sapCustMultSvcSite,
        sapIngressQosSchedulerPolicy,
        sapEgressQosSchedulerPolicy,
        sapSplitHorizonGrp,
        sapIngressSharedQueuePolicy,
        sapIngressMatchQinQDot1PBits,
        sapOperFlags,
        sapLastStatusChange,
        sapAntiSpoofing,
        sapIngUseMultipointShared,
        sapEgressQinQMarkTopOnly,
        sapEndPoint,
        sapIngressVlanTranslation,
        sapSubType,
        sapCpmProtPolicyId,
        sapCpmProtMonitorMac,
        sapEgressFrameBasedAccounting,
        sapEthernetLLFAdminStatus,
        sapEthernetLLFOperStatus,
        sapTlsMvplsRowStatus,
        sapEgressFrameBasedAccounting,
        sapCallingStationId,
        sapIngPolicerPolicy,
        sapEgrPolicerPolicy,
        sapIpv6HostInfoIpoeDhcp6Hosts,
        sapIpv6HostInfoPppDhcp6Hosts,
        sapIpv6HostInfoPppSLAACHosts,
        sapIngQosQMBSBytes,
        sapEgrQosQMBSBytes
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP capabilities for
         14.0 release on Nokia SROS series systems."
    ::= { tmnxSapGroups 488 }

tmnxSapObsoletedV14v0Group       OBJECT-GROUP
    OBJECTS     {
        sapTodSuite,
        sapCurrentIngressIpFilterId,
        sapCurrentIngressMacFilterId,
        sapCurrentIngressQosPolicyId,
        sapCurrentIngressQosSchedPlcy,
        sapCurrentEgressIpFilterId,
        sapCurrentEgressMacFilterId,
        sapCurrentEgressQosPolicyId,
        sapCurrentEgressQosSchedPlcy,
        sapIntendedIngressIpFilterId,
        sapIntendedIngressMacFilterId,
        sapIntendedIngressQosPolicyId,
        sapIntendedIngressQosSchedPlcy,
        sapIntendedEgressIpFilterId,
        sapIntendedEgressMacFilterId,
        sapIntendedEgressQosPolicyId,
        sapIntendedEgressQosSchedPlcy,
        sapIgQosPlcyDroppedHiPrioPackets,
        sapIgQosPlcyDroppedHiPrioOctets,
        sapIgQosPlcyDroppedLoPrioPackets,
        sapIgQosPlcyDroppedLoPrioOctets,
        sapIgQosPlcyForwardedInProfPackets,
        sapIgQosPlcyForwardedInProfOctets,
        sapIgQosPlcyForwardedOutProfPackets,
        sapIgQosPlcyForwardedOutProfOctets,
        sapEgQosPlcyDroppedInProfPackets,
        sapEgQosPlcyDroppedInProfOctets,
        sapEgQosPlcyDroppedOutProfPackets,
        sapEgQosPlcyDroppedOutProfOctets,
        sapEgQosPlcyForwardedInProfPackets,
        sapEgQosPlcyForwardedInProfOctets,
        sapEgQosPlcyForwardedOutProfPackets,
        sapEgQosPlcyForwardedOutProfOctets,
        sapIgQosPlcyQueueStatsOfferedHiPrioPackets,
        sapIgQosPlcyQueueStatsDroppedHiPrioPackets,
        sapIgQosPlcyQueueStatsOfferedLoPrioPackets,
        sapIgQosPlcyQueueStatsDroppedLoPrioPackets,
        sapIgQosPlcyQueueStatsOfferedHiPrioOctets,
        sapIgQosPlcyQueueStatsDroppedHiPrioOctets,
        sapIgQosPlcyQueueStatsOfferedLoPrioOctets,
        sapIgQosPlcyQueueStatsDroppedLoPrioOctets,
        sapIgQosPlcyQueueStatsForwardedInProfPackets,
        sapIgQosPlcyQueueStatsForwardedOutProfPackets,
        sapIgQosPlcyQueueStatsForwardedInProfOctets,
        sapIgQosPlcyQueueStatsForwardedOutProfOctets,
        sapIgQosPlcyQueueCustId,
        sapIgQosPlcyQueueStatsUncoloredPacketsOffered,
        sapIgQosPlcyQueueStatsUncoloredOctetsOffered,
        sapEgQosPlcyQueueStatsForwardedInProfPackets,
        sapEgQosPlcyQueueStatsDroppedInProfPackets,
        sapEgQosPlcyQueueStatsForwardedOutProfPackets,
        sapEgQosPlcyQueueStatsDroppedOutProfPackets,
        sapEgQosPlcyQueueStatsForwardedInProfOctets,
        sapEgQosPlcyQueueStatsDroppedInProfOctets,
        sapEgQosPlcyQueueStatsForwardedOutProfOctets,
        sapEgQosPlcyQueueStatsDroppedOutProfOctets,
        sapEgQosPlcyQueueCustId,
        sapIngSchedPlcyStatsFwdPkt,
        sapIngSchedPlcyStatsFwdOct,
        sapEgrSchedPlcyStatsFwdPkt,
        sapEgrSchedPlcyStatsFwdOct,
        sapIngSchedPlcyPortStatsFwdPkt,
        sapIngSchedPlcyPortStatsFwdOct,
        sapEgrSchedPlcyPortStatsFwdPkt,
        sapEgrSchedPlcyPortStatsFwdOct,
        sapIgQosPlcyPStatCustId,
        sapIgQosPlcyPStatMode,
        sapIgQosPlcyPStatOffHiPrioPkts,
        sapIgQosPlcyPStatDrpHiPrioPkts,
        sapIgQosPlcyPStatOffLoPrioPkts,
        sapIgQosPlcyPStatDrpLoPrioPkts,
        sapIgQosPlcyPStatOffHiPrioOcts,
        sapIgQosPlcyPStatDrpHiPrioOcts,
        sapIgQosPlcyPStatOffLoPrioOcts,
        sapIgQosPlcyPStatDrpLoPrioOcts,
        sapIgQosPlcyPStatFwdInProfPkts,
        sapIgQosPlcyPStatFwdOutProfPkts,
        sapIgQosPlcyPStatFwdInProfOcts,
        sapIgQosPlcyPStatFwdOutProfOcts,
        sapIgQosPlcyPStatUncolPktsOff,
        sapIgQosPlcyPStatUncolOctsOff,
        sapIgQosPlcyPStatOffHiPrioPkts,
        sapIgQosPlcyPStatOffHiPrioPktsL,
        sapIgQosPlcyPStatOffHiPrioPktsH,
        sapIgQosPlcyPStatDrpHiPrioPkts,
        sapIgQosPlcyPStatDrpHiPrioPktsL,
        sapIgQosPlcyPStatDrpHiPrioPktsH,
        sapIgQosPlcyPStatOffLoPrioPkts,
        sapIgQosPlcyPStatOffLoPrioPktsL,
        sapIgQosPlcyPStatOffLoPrioPktsH,
        sapIgQosPlcyPStatDrpLoPrioPkts,
        sapIgQosPlcyPStatDrpLoPrioPktsL,
        sapIgQosPlcyPStatDrpLoPrioPktsH,
        sapIgQosPlcyPStatOffHiPrioOcts,
        sapIgQosPlcyPStatOffHiPrioOctsL,
        sapIgQosPlcyPStatOffHiPrioOctsH,
        sapIgQosPlcyPStatDrpHiPrioOcts,
        sapIgQosPlcyPStatDrpHiPrioOctsL,
        sapIgQosPlcyPStatDrpHiPrioOctsH,
        sapIgQosPlcyPStatOffLoPrioOcts,
        sapIgQosPlcyPStatOffLoPrioOctsL,
        sapIgQosPlcyPStatOffLoPrioOctsH,
        sapIgQosPlcyPStatDrpLoPrioOcts,
        sapIgQosPlcyPStatDrpLoPrioOctsL,
        sapIgQosPlcyPStatDrpLoPrioOctsH,
        sapIgQosPlcyPStatFwdInProfPkts,
        sapIgQosPlcyPStatFwdInProfPktsL,
        sapIgQosPlcyPStatFwdInProfPktsH,
        sapIgQosPlcyPStatFwdOutProfPkts,
        sapIgQosPlcyPStatFwdOutProfPktsL,
        sapIgQosPlcyPStatFwdOutProfPktsH,
        sapIgQosPlcyPStatFwdInProfOcts,
        sapIgQosPlcyPStatFwdInProfOctsL,
        sapIgQosPlcyPStatFwdInProfOctsH,
        sapIgQosPlcyPStatFwdOutProfOcts,
        sapIgQosPlcyPStatFwdOutProfOctsL,
        sapIgQosPlcyPStatFwdOutProfOctsH,
        sapIgQosPlcyPStatUncolPktsOff,
        sapIgQosPlcyPStatUncolPktsOffL,
        sapIgQosPlcyPStatUncolPktsOffH,
        sapIgQosPlcyPStatUncolOctsOff,
        sapIgQosPlcyPStatUncolOctsOffL,
        sapIgQosPlcyPStatUncolOctsOffH,
        sapEgQosPlcyPStatCustId,
        sapEgQosPlcyPStatMode,
        sapEgQosPlcyPStatOffInProfPkts,
        sapEgQosPlcyPStatOffInProfPktsL,
        sapEgQosPlcyPStatOffInProfPktsH,
        sapEgQosPlcyPStatFwdInProfPkts,
        sapEgQosPlcyPStatFwdInProfPktsL,
        sapEgQosPlcyPStatFwdInProfPktsH,
        sapEgQosPlcyPStatDrpInProfPkts,
        sapEgQosPlcyPStatDrpInProfPktsL,
        sapEgQosPlcyPStatDrpInProfPktsH,
        sapEgQosPlcyPStatOffOutProfPkts,
        sapEgQosPlcyPStatOffOutProfPktsL,
        sapEgQosPlcyPStatOffOutProfPktsH,
        sapEgQosPlcyPStatFwdOutProfPkts,
        sapEgQosPlcyPStatFwdOutProfPktsL,
        sapEgQosPlcyPStatFwdOutProfPktsH,
        sapEgQosPlcyPStatDrpOutProfPkts,
        sapEgQosPlcyPStatDrpOutProfPktsL,
        sapEgQosPlcyPStatDrpOutProfPktsH,
        sapEgQosPlcyPStatOffInProfOcts,
        sapEgQosPlcyPStatOffInProfOctsL,
        sapEgQosPlcyPStatOffInProfOctsH,
        sapEgQosPlcyPStatFwdInProfOcts,
        sapEgQosPlcyPStatFwdInProfOctsL,
        sapEgQosPlcyPStatFwdInProfOctsH,
        sapEgQosPlcyPStatDrpInProfOcts,
        sapEgQosPlcyPStatDrpInProfOctsL,
        sapEgQosPlcyPStatDrpInProfOctsH,
        sapEgQosPlcyPStatOffOutProfOcts,
        sapEgQosPlcyPStatOffOutProfOctsL,
        sapEgQosPlcyPStatOffOutProfOctsH,
        sapEgQosPlcyPStatFwdOutProfOcts,
        sapEgQosPlcyPStatFwdOutProfOctsL,
        sapEgQosPlcyPStatFwdOutProfOctsH,
        sapEgQosPlcyPStatDrpOutProfOcts,
        sapEgQosPlcyPStatDrpOutProfOctsL,
        sapEgQosPlcyPStatDrpOutProfOctsH,
        sapCurrentIngressIpv6FilterId,
        sapCurrentEgressIpv6FilterId,
        sapIntendedIngressIpv6FilterId,
        sapIntendedEgressIpv6FilterId
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of SAP
         capabilities for 14.0 release on Nokia SROS series systems."
    ::= { tmnxSapGroups 489 }

tmnxSapQosV14v0Group             OBJECT-GROUP
    OBJECTS     {
        sapIngQosQueueId,
        sapIngQosQueueStatsOfferedHiPrioPackets,
        sapIngQosQueueStatsDroppedHiPrioPackets,
        sapIngQosQueueStatsOfferedLoPrioPackets,
        sapIngQosQueueStatsDroppedLoPrioPackets,
        sapIngQosQueueStatsOfferedHiPrioOctets,
        sapIngQosQueueStatsDroppedHiPrioOctets,
        sapIngQosQueueStatsOfferedLoPrioOctets,
        sapIngQosQueueStatsDroppedLoPrioOctets,
        sapIngQosQueueStatsForwardedInProfPackets,
        sapIngQosQueueStatsForwardedOutProfPackets,
        sapIngQosQueueStatsForwardedInProfOctets,
        sapIngQosQueueStatsForwardedOutProfOctets,
        sapIngQosCustId,
        sapIngQosQueueStatsUncoloredPacketsOffered,
        sapIngQosQueueStatsUncoloredOctetsOffered,
        sapEgrQosQueueId,
        sapEgrQosQueueStatsForwardedInProfPackets,
        sapEgrQosQueueStatsDroppedInProfPackets,
        sapEgrQosQueueStatsForwardedOutProfPackets,
        sapEgrQosQueueStatsDroppedOutProfPackets,
        sapEgrQosQueueStatsForwardedInProfOctets,
        sapEgrQosQueueStatsDroppedInProfOctets,
        sapEgrQosQueueStatsForwardedOutProfOctets,
        sapEgrQosQueueStatsDroppedOutProfOctets,
        sapEgrQosCustId,
        sapIngQosSchedStatsForwardedPackets,
        sapIngQosSchedStatsForwardedOctets,
        sapIngQosSchedCustId,
        sapEgrQosSchedStatsForwardedPackets,
        sapEgrQosSchedStatsForwardedOctets,
        sapEgrQosSchedCustId,
        sapIngQosQRowStatus,
        sapIngQosQLastMgmtChange,
        sapIngQosQOverrideFlags,
        sapIngQosQCBS,
        sapIngQosQHiPrioOnly,
        sapIngQosQCIRAdaptation,
        sapIngQosQPIRAdaptation,
        sapIngQosQAdminPIR,
        sapIngQosQAdminCIR,
        sapEgrQosQRowStatus,
        sapEgrQosQLastMgmtChange,
        sapEgrQosQOverrideFlags,
        sapEgrQosQCBS,
        sapEgrQosQHiPrioOnly,
        sapEgrQosQCIRAdaptation,
        sapEgrQosQPIRAdaptation,
        sapEgrQosQAdminPIR,
        sapEgrQosQAdminCIR,
        sapEgrQosQAvgOverhead,
        sapIngQosSRowStatus,
        sapIngQosSLastMgmtChange,
        sapIngQosSOverrideFlags,
        sapIngQosSSummedCIR,
        sapEgrQosSRowStatus,
        sapEgrQosSLastMgmtChange,
        sapEgrQosSOverrideFlags,
        sapEgrQosSSummedCIR,
        sapIngQosPStatsCustId,
        sapIngQosPStatsMode,
        sapIngQosPStatsOffHiPrioPkts,
        sapIngQosPStatsOffHiPrioPktsLo,
        sapIngQosPStatsOffHiPrioPktsHi,
        sapIngQosPStatsDrpHiPrioPkts,
        sapIngQosPStatsDrpHiPrioPktsLo,
        sapIngQosPStatsDrpHiPrioPktsHi,
        sapIngQosPStatsOffLoPrioPkts,
        sapIngQosPStatsOffLoPrioPktsLo,
        sapIngQosPStatsOffLoPrioPktsHi,
        sapIngQosPStatsDrpLoPrioPkts,
        sapIngQosPStatsDrpLoPrioPktsLo,
        sapIngQosPStatsDrpLoPrioPktsHi,
        sapIngQosPStatsOffHiPrioOcts,
        sapIngQosPStatsOffHiPrioOctsLo,
        sapIngQosPStatsOffHiPrioOctsHi,
        sapIngQosPStatsDrpHiPrioOcts,
        sapIngQosPStatsDrpHiPrioOctsLo,
        sapIngQosPStatsDrpHiPrioOctsHi,
        sapIngQosPStatsOffLoPrioOcts,
        sapIngQosPStatsOffLoPrioOctsLo,
        sapIngQosPStatsOffLoPrioOctsHi,
        sapIngQosPStatsDrpLoPrioOcts,
        sapIngQosPStatsDrpLoPrioOctsLo,
        sapIngQosPStatsDrpLoPrioOctsHi,
        sapIngQosPStatsFwdInProfPkts,
        sapIngQosPStatsFwdInProfPktsLo,
        sapIngQosPStatsFwdInProfPktsHi,
        sapIngQosPStatsFwdOutProfPkts,
        sapIngQosPStatsFwdOutProfPktsLo,
        sapIngQosPStatsFwdOutProfPktsHi,
        sapIngQosPStatsFwdInProfOcts,
        sapIngQosPStatsFwdInProfOctsLo,
        sapIngQosPStatsFwdInProfOctsHi,
        sapIngQosPStatsFwdOutProfOcts,
        sapIngQosPStatsFwdOutProfOctsLo,
        sapIngQosPStatsFwdOutProfOctsHi,
        sapIngQosPStatsUncolPktsOff,
        sapIngQosPStatsUncolPktsOffLo,
        sapIngQosPStatsUncolPktsOffHi,
        sapIngQosPStatsUncolOctsOff,
        sapIngQosPStatsUncolOctsOffLo,
        sapIngQosPStatsUncolOctsOffHi,
        sapEgrQosPStatsCustId,
        sapEgrQosPStatsMode,
        sapEgrQosPStatsOffInProfPkts,
        sapEgrQosPStatsOffInProfPktsLo,
        sapEgrQosPStatsOffInProfPktsHi,
        sapEgrQosPStatsFwdInProfPkts,
        sapEgrQosPStatsFwdInProfPktsLo,
        sapEgrQosPStatsFwdInProfPktsHi,
        sapEgrQosPStatsDrpInProfPkts,
        sapEgrQosPStatsDrpInProfPktsLo,
        sapEgrQosPStatsDrpInProfPktsHi,
        sapEgrQosPStatsOffOutProfPkts,
        sapEgrQosPStatsOffOutProfPktsLo,
        sapEgrQosPStatsOffOutProfPktsHi,
        sapEgrQosPStatsFwdOutProfPkts,
        sapEgrQosPStatsFwdOutProfPktsLo,
        sapEgrQosPStatsFwdOutProfPktsHi,
        sapEgrQosPStatsDrpOutProfPkts,
        sapEgrQosPStatsDrpOutProfPktsLo,
        sapEgrQosPStatsDrpOutProfPktsHi,
        sapEgrQosPStatsOffInProfOcts,
        sapEgrQosPStatsOffInProfOctsLo,
        sapEgrQosPStatsOffInProfOctsHi,
        sapEgrQosPStatsFwdInProfOcts,
        sapEgrQosPStatsFwdInProfOctsLo,
        sapEgrQosPStatsFwdInProfOctsHi,
        sapEgrQosPStatsDrpInProfOcts,
        sapEgrQosPStatsDrpInProfOctsLo,
        sapEgrQosPStatsDrpInProfOctsHi,
        sapEgrQosPStatsOffOutProfOcts,
        sapEgrQosPStatsOffOutProfOctsLo,
        sapEgrQosPStatsOffOutProfOctsHi,
        sapEgrQosPStatsFwdOutProfOcts,
        sapEgrQosPStatsFwdOutProfOctsLo,
        sapEgrQosPStatsFwdOutProfOctsHi,
        sapEgrQosPStatsDrpOutProfOcts,
        sapEgrQosPStatsDrpOutProfOctsLo,
        sapEgrQosPStatsDrpOutProfOctsHi,
        sapEgrQosPStatsUncolPktsOff,
        sapEgrQosPStatsUncolPktsOffLo,
        sapEgrQosPStatsUncolPktsOffHi,
        sapEgrQosPStatsUncolOctsOff,
        sapEgrQosPStatsUncolOctsOffLo,
        sapEgrQosPStatsUncolOctsOffHi,
        sapEgrQosArbitStatsFwdOcts,
        sapEgrQosArbitStatsFwdOctsHi,
        sapEgrQosArbitStatsFwdOctsLo,
        sapEgrQosArbitStatsFwdPkts,
        sapEgrQosArbitStatsFwdPktsHi,
        sapEgrQosArbitStatsFwdPktsLo,
        sapIngQosArbitStatsFwdOcts,
        sapIngQosArbitStatsFwdOctsHi,
        sapIngQosArbitStatsFwdOctsLo,
        sapIngQosArbitStatsFwdPkts,
        sapIngQosArbitStatsFwdPktsHi,
        sapIngQosArbitStatsFwdPktsLo,
        sapPortIdEgrQosArbitFwdOcts,
        sapPortIdEgrQosArbitFwdOctsHi,
        sapPortIdEgrQosArbitFwdOctsLo,
        sapPortIdEgrQosArbitFwdPkts,
        sapPortIdEgrQosArbitFwdPktsHi,
        sapPortIdEgrQosArbitFwdPktsLo,
        sapPortIdIngQosArbitFwdOcts,
        sapPortIdIngQosArbitFwdOctsHi,
        sapPortIdIngQosArbitFwdOctsLo,
        sapPortIdIngQosArbitFwdPkts,
        sapPortIdIngQosArbitFwdPktsHi,
        sapPortIdIngQosArbitFwdPktsLo
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 490 }

tmnxSapIpV6FilterV14v0Group      OBJECT-GROUP
    OBJECTS     {
        sapIngressIpv6FilterId,
        sapEgressIpv6FilterId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Policy capabilities
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 491 }

tmnxSapFlowSPecObsoletedV14v0Grp OBJECT-GROUP
    OBJECTS     {
        sapIngressFlowspec,
        sapIngressIPv6Flowspec
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting SAP BGP Flow-Spec feature on
         Nokia SROS series systems release 14.0."
    ::= { tmnxSapGroups 492 }

sapEthLoopbackV14v0Group         OBJECT-GROUP
    OBJECTS     {
        sapEthLoopbackOperState
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting SAP Ethernet Loopback
         feature on Nokia SROS series systems release 14.0."
    ::= { tmnxSapGroups 493 }

tmnxSapTlsPbbV14v0Group          OBJECT-GROUP
    OBJECTS     {
        sapTlsDisableSendBvplsEvpnFlush
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting SAP PBB feature on Nokia
         SROS series systems release 14.0."
    ::= { tmnxSapGroups 494 }

tmnxSapVprnLoopbackV14v0Group    OBJECT-GROUP
    OBJECTS     {
        sapL3LoopbackRowStatus,
        sapL3LoopbackIgnrPortOpState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP VPRN Loopback
         feature on Nokia SROS series systems in release 14.0."
    ::= { tmnxSapGroups 495 }

tmnxSapL2tpv3V14v0Group          OBJECT-GROUP
    OBJECTS     {
        sapL2tpv3TableLastChanged,
        sapL2tpv3RowStatus,
        sapL2tpv3LastChanged,
        sapL2tpv3ServiceId,
        sapL2tpv3RouterId,
        sapL2tpv3TunnelGroupName,
        sapL2tpv3VcId,
        sapL2tpv3PwType,
        sapL2tpv3AdminState,
        sapL2tpv3OperState,
        sapL2tpv3TunnelStatus,
        sapL2tpv3OperFlags,
        sapL2tpv3LastOperChgd,
        sapL2tpv3HostISA,
        sapL2tpv3EthVlanQtag
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the SAP L2TPV3 feature
         on Nokia SROS series systems in release 14.0."
    ::= { tmnxSapGroups 496 }

tmnxSapBgpEvpnAlmpGroup          OBJECT-GROUP
    OBJECTS     {
        sapTlsRestProtSrcMacOper,
        sapTlsRestProtSrcMacOperAct
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP BGP EVPN feature
         on Nokia SROS series systems in release 14.0."
    ::= { tmnxSapGroups 497 }

sapL3LoopbackNotifGroup          NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapIfIgnorePortStateStart,
        sapIfIgnorePortStateStop
    }
    STATUS      current
    DESCRIPTION
        "The group notifications supporting SAP L3 Loopback feature on Nokia
         SROS series systems release 14.0."
    ::= { tmnxSapGroups 498 }

sapV14v0NotifyObjsGroup          OBJECT-GROUP
    OBJECTS     {
        sapNotifyIfName
    }
    STATUS      current
    DESCRIPTION
        "A group of notification objects added in release 14.0 of Nokia SROS
         series systems."
    ::= { tmnxSapGroups 499 }

tmnxSapEgrQosStatsGroup          OBJECT-GROUP
    OBJECTS     {
        sapEgrQosPStatsOffExdProfPkts,
        sapEgrQosPStatsOffExdProfOcts,
        sapEgrQosPStatsOffInPlusProfPkts,
        sapEgrQosPStatsFwdInPlusProfPkts,
        sapEgrQosPStatsDrpInPlusProfPkts,
        sapEgrQosPStatsOffInPlusProfOcts,
        sapEgrQosPStatsFwdInPlusProfOcts,
        sapEgrQosPStatsDrpInPlusProfOcts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Egress QoS
         statistics capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 500 }

tmnxDDosDCpuProtPolicyGrp        OBJECT-GROUP
    OBJECTS     {
        sapOperDCpuProtPolicy,
        sapTmplDCpuProtPolicy
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of DDos Protection
         Enhancement feature on Nokia SROS series systems."
    ::= { tmnxSapGroups 501 }

tmnxSapCfmLmmPerQosV15v0Group    OBJECT-GROUP
    OBJECTS     {
        sapEthCfmCollLmmFcSts,
        sapEthCfmCollLmmFcStsInP
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting the ETH-LMM per QoS Class feature on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 502 }

tmnxSapQosQDropTailGroup         OBJECT-GROUP
    OBJECTS     {
        sapIngQosQDrpTailLowReductnMbs,
        sapEgrQosQDrpTailLowReductnMbs
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP QoS drop tail
         configuration on Nokia SROS series systems."
    ::= { tmnxSapGroups 503 }

tmnxSapQosV15v0Group             OBJECT-GROUP
    OBJECTS     {
        sapIngQosQueueId,
        sapIngQosQueueStatsOfferedHiPrioPackets,
        sapIngQosQueueStatsDroppedHiPrioPackets,
        sapIngQosQueueStatsOfferedLoPrioPackets,
        sapIngQosQueueStatsDroppedLoPrioPackets,
        sapIngQosQueueStatsOfferedHiPrioOctets,
        sapIngQosQueueStatsDroppedHiPrioOctets,
        sapIngQosQueueStatsOfferedLoPrioOctets,
        sapIngQosQueueStatsDroppedLoPrioOctets,
        sapIngQosQueueStatsForwardedInProfPackets,
        sapIngQosQueueStatsForwardedOutProfPackets,
        sapIngQosQueueStatsForwardedInProfOctets,
        sapIngQosQueueStatsForwardedOutProfOctets,
        sapIngQosCustId,
        sapIngQosQueueStatsUncoloredPacketsOffered,
        sapIngQosQueueStatsUncoloredOctetsOffered,
        sapEgrQosQueueId,
        sapEgrQosQueueStatsForwardedInProfPackets,
        sapEgrQosQueueStatsDroppedInProfPackets,
        sapEgrQosQueueStatsForwardedOutProfPackets,
        sapEgrQosQueueStatsDroppedOutProfPackets,
        sapEgrQosQueueStatsForwardedInProfOctets,
        sapEgrQosQueueStatsDroppedInProfOctets,
        sapEgrQosQueueStatsForwardedOutProfOctets,
        sapEgrQosQueueStatsDroppedOutProfOctets,
        sapEgrQosCustId,
        sapIngQosSchedStatsForwardedPackets,
        sapIngQosSchedStatsForwardedOctets,
        sapIngQosSchedCustId,
        sapEgrQosSchedStatsForwardedPackets,
        sapEgrQosSchedStatsForwardedOctets,
        sapEgrQosSchedCustId,
        sapIngQosQRowStatus,
        sapIngQosQLastMgmtChange,
        sapIngQosQOverrideFlags,
        sapIngQosQCBS,
        sapIngQosQCIRAdaptation,
        sapIngQosQPIRAdaptation,
        sapIngQosQAdminPIR,
        sapIngQosQAdminCIR,
        sapEgrQosQRowStatus,
        sapEgrQosQLastMgmtChange,
        sapEgrQosQOverrideFlags,
        sapEgrQosQCBS,
        sapEgrQosQCIRAdaptation,
        sapEgrQosQPIRAdaptation,
        sapEgrQosQAdminPIR,
        sapEgrQosQAdminCIR,
        sapEgrQosQAvgOverhead,
        sapIngQosSRowStatus,
        sapIngQosSLastMgmtChange,
        sapIngQosSOverrideFlags,
        sapIngQosSSummedCIR,
        sapEgrQosSRowStatus,
        sapEgrQosSLastMgmtChange,
        sapEgrQosSOverrideFlags,
        sapEgrQosSSummedCIR,
        sapIngQosPStatsCustId,
        sapIngQosPStatsMode,
        sapIngQosPStatsOffHiPrioPkts,
        sapIngQosPStatsOffHiPrioPktsLo,
        sapIngQosPStatsOffHiPrioPktsHi,
        sapIngQosPStatsDrpHiPrioPkts,
        sapIngQosPStatsDrpHiPrioPktsLo,
        sapIngQosPStatsDrpHiPrioPktsHi,
        sapIngQosPStatsOffLoPrioPkts,
        sapIngQosPStatsOffLoPrioPktsLo,
        sapIngQosPStatsOffLoPrioPktsHi,
        sapIngQosPStatsDrpLoPrioPkts,
        sapIngQosPStatsDrpLoPrioPktsLo,
        sapIngQosPStatsDrpLoPrioPktsHi,
        sapIngQosPStatsOffHiPrioOcts,
        sapIngQosPStatsOffHiPrioOctsLo,
        sapIngQosPStatsOffHiPrioOctsHi,
        sapIngQosPStatsDrpHiPrioOcts,
        sapIngQosPStatsDrpHiPrioOctsLo,
        sapIngQosPStatsDrpHiPrioOctsHi,
        sapIngQosPStatsOffLoPrioOcts,
        sapIngQosPStatsOffLoPrioOctsLo,
        sapIngQosPStatsOffLoPrioOctsHi,
        sapIngQosPStatsDrpLoPrioOcts,
        sapIngQosPStatsDrpLoPrioOctsLo,
        sapIngQosPStatsDrpLoPrioOctsHi,
        sapIngQosPStatsFwdInProfPkts,
        sapIngQosPStatsFwdInProfPktsLo,
        sapIngQosPStatsFwdInProfPktsHi,
        sapIngQosPStatsFwdOutProfPkts,
        sapIngQosPStatsFwdOutProfPktsLo,
        sapIngQosPStatsFwdOutProfPktsHi,
        sapIngQosPStatsFwdInProfOcts,
        sapIngQosPStatsFwdInProfOctsLo,
        sapIngQosPStatsFwdInProfOctsHi,
        sapIngQosPStatsFwdOutProfOcts,
        sapIngQosPStatsFwdOutProfOctsLo,
        sapIngQosPStatsFwdOutProfOctsHi,
        sapIngQosPStatsUncolPktsOff,
        sapIngQosPStatsUncolPktsOffLo,
        sapIngQosPStatsUncolPktsOffHi,
        sapIngQosPStatsUncolOctsOff,
        sapIngQosPStatsUncolOctsOffLo,
        sapIngQosPStatsUncolOctsOffHi,
        sapEgrQosPStatsCustId,
        sapEgrQosPStatsMode,
        sapEgrQosPStatsOffInProfPkts,
        sapEgrQosPStatsOffInProfPktsLo,
        sapEgrQosPStatsOffInProfPktsHi,
        sapEgrQosPStatsFwdInProfPkts,
        sapEgrQosPStatsFwdInProfPktsLo,
        sapEgrQosPStatsFwdInProfPktsHi,
        sapEgrQosPStatsDrpInProfPkts,
        sapEgrQosPStatsDrpInProfPktsLo,
        sapEgrQosPStatsDrpInProfPktsHi,
        sapEgrQosPStatsOffOutProfPkts,
        sapEgrQosPStatsOffOutProfPktsLo,
        sapEgrQosPStatsOffOutProfPktsHi,
        sapEgrQosPStatsFwdOutProfPkts,
        sapEgrQosPStatsFwdOutProfPktsLo,
        sapEgrQosPStatsFwdOutProfPktsHi,
        sapEgrQosPStatsDrpOutProfPkts,
        sapEgrQosPStatsDrpOutProfPktsLo,
        sapEgrQosPStatsDrpOutProfPktsHi,
        sapEgrQosPStatsOffInProfOcts,
        sapEgrQosPStatsOffInProfOctsLo,
        sapEgrQosPStatsOffInProfOctsHi,
        sapEgrQosPStatsFwdInProfOcts,
        sapEgrQosPStatsFwdInProfOctsLo,
        sapEgrQosPStatsFwdInProfOctsHi,
        sapEgrQosPStatsDrpInProfOcts,
        sapEgrQosPStatsDrpInProfOctsLo,
        sapEgrQosPStatsDrpInProfOctsHi,
        sapEgrQosPStatsOffOutProfOcts,
        sapEgrQosPStatsOffOutProfOctsLo,
        sapEgrQosPStatsOffOutProfOctsHi,
        sapEgrQosPStatsFwdOutProfOcts,
        sapEgrQosPStatsFwdOutProfOctsLo,
        sapEgrQosPStatsFwdOutProfOctsHi,
        sapEgrQosPStatsDrpOutProfOcts,
        sapEgrQosPStatsDrpOutProfOctsLo,
        sapEgrQosPStatsDrpOutProfOctsHi,
        sapEgrQosPStatsUncolPktsOff,
        sapEgrQosPStatsUncolPktsOffLo,
        sapEgrQosPStatsUncolPktsOffHi,
        sapEgrQosPStatsUncolOctsOff,
        sapEgrQosPStatsUncolOctsOffLo,
        sapEgrQosPStatsUncolOctsOffHi,
        sapEgrQosArbitStatsFwdOcts,
        sapEgrQosArbitStatsFwdOctsHi,
        sapEgrQosArbitStatsFwdOctsLo,
        sapEgrQosArbitStatsFwdPkts,
        sapEgrQosArbitStatsFwdPktsHi,
        sapEgrQosArbitStatsFwdPktsLo,
        sapIngQosArbitStatsFwdOcts,
        sapIngQosArbitStatsFwdOctsHi,
        sapIngQosArbitStatsFwdOctsLo,
        sapIngQosArbitStatsFwdPkts,
        sapIngQosArbitStatsFwdPktsHi,
        sapIngQosArbitStatsFwdPktsLo,
        sapPortIdEgrQosArbitFwdOcts,
        sapPortIdEgrQosArbitFwdOctsHi,
        sapPortIdEgrQosArbitFwdOctsLo,
        sapPortIdEgrQosArbitFwdPkts,
        sapPortIdEgrQosArbitFwdPktsHi,
        sapPortIdEgrQosArbitFwdPktsLo,
        sapPortIdIngQosArbitFwdOcts,
        sapPortIdIngQosArbitFwdOctsHi,
        sapPortIdIngQosArbitFwdOctsLo,
        sapPortIdIngQosArbitFwdPkts,
        sapPortIdIngQosArbitFwdPktsHi,
        sapPortIdIngQosArbitFwdPktsLo
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         capabilities on Nokia SROS series systems."
    ::= { tmnxSapGroups 505 }

tmnxSapObsoletedV15v0Group       OBJECT-GROUP
    OBJECTS     {
        sapIngQosQHiPrioOnly,
        sapEgrQosQHiPrioOnly,
        sapIngQosQAdminPIR,
        sapIngQosQAdminCIR,
        sapIngPlcrCtrlOvrMaxRate,
        sapEgrQosQAdminPIR,
        sapEgrQosQAdminCIR,
        sapEgrPlcrCtrlOvrMaxRate
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of SAP
         capabilities for 15.0 release on Nokia SROS series systems."
    ::= { tmnxSapGroups 506 }

tmnxSapEsmMacV15v0Group          OBJECT-GROUP
    OBJECTS     {
        sapStatHostAppProfileScope,
        sapStatHost6AppProfileScope
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP AA sub per-mac host
         divert feature on Nokia SROS series systems added in release 15.0."
    ::= { tmnxSapGroups 507 }

tmnxSapQosRateGroup              OBJECT-GROUP
    OBJECTS     {
        sapIngQosQAdminPIRHi,
        sapIngQosQAdminPIRLo,
        sapIngQosQAdminCIRHi,
        sapIngQosQAdminCIRLo,
        sapEgrQosQAdminPIRHi,
        sapEgrQosQAdminPIRLo,
        sapEgrQosQAdminCIRHi,
        sapEgrQosQAdminCIRLo,
        sapIngPlcrCtrlOvrMaxRateHi,
        sapIngPlcrCtrlOvrMaxRateLo,
        sapEgrPlcrCtrlOvrMaxRateHi,
        sapEgrPlcrCtrlOvrMaxRateLo,
        sapEgrEncapGrpAggRateLimitHi,
        sapTmplEgrAggRateLimitHi,
        sapEgressAggRateLmtHi
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects enhancing the management of SAP QOS
         rates configuration on Nokia SROS series systems in Release 15.0."
    ::= { tmnxSapGroups 508 }

tmnxSapQosHsQOvrGroup            OBJECT-GROUP
    OBJECTS     {
        sapEgrQosQueueOvrHsSecShaper,
        sapEgrQosQHsWrrWeight,
        sapEgrQosQHsClassWeight,
        sapEgrQosQHsWredQSlopePlcy
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP egress QoS queue
         override feature on Nokia SROS series systems added in release 15.0."
    ::= { tmnxSapGroups 509 }

tmnxSapTlsV15v0Group             OBJECT-GROUP
    OBJECTS     {
        sapTlsStpAdminStatus,
        sapTlsStpPriority,
        sapTlsStpPortNum,
        sapTlsStpPathCost,
        sapTlsStpRapidStart,
        sapTlsStpBpduEncap,
        sapTlsStpPortState,
        sapTlsStpDesignatedBridge,
        sapTlsStpDesignatedPort,
        sapTlsStpForwardTransitions,
        sapTlsStpInConfigBpdus,
        sapTlsStpInTcnBpdus,
        sapTlsStpInBadBpdus,
        sapTlsStpOutConfigBpdus,
        sapTlsStpOutTcnBpdus,
        sapTlsStpOperBpduEncap,
        sapTlsVpnId,
        sapTlsCustId,
        sapTlsMacAddressLimit,
        sapTlsNumMacAddresses,
        sapTlsNumStaticMacAddresses,
        sapTlsMacLearning,
        sapTlsMacAgeing,
        sapTlsStpOperEdge,
        sapTlsStpAdminPointToPoint,
        sapTlsStpPortRole,
        sapTlsStpAutoEdge,
        sapTlsStpOperProtocol,
        sapTlsStpInRstBpdus,
        sapTlsStpOutRstBpdus,
        sapTlsLimitMacMove,
        sapTlsMacPinning,
        sapTlsDiscardUnknownSource,
        sapTlsMvplsPruneState,
        sapTlsMvplsMgmtService,
        sapTlsMvplsMgmtPortId,
        sapTlsMvplsMgmtEncapValue,
        sapTlsArpReplyAgent,
        sapTlsStpException,
        sapTlsAuthenticationPolicy,
        sapTlsL2ptTermination,
        sapTlsBpduTranslation,
        sapTlsStpRootGuard,
        sapTlsStpInsideRegion,
        sapTlsStpInMstBpdus,
        sapTlsStpOutMstBpdus,
        sapTlsRestProtSrcMac,
        sapTlsRestProtSrcMacAction,
        sapTlsRestUnprotDstMac,
        sapTlsStpRxdDesigBridge,
        sapTlsStpRootGuardViolation,
        sapTlsShcvAction,
        sapTlsShcvSrcIp,
        sapTlsShcvSrcMac,
        sapTlsShcvInterval,
        sapTlsMvplsMgmtMsti,
        sapTlsMacMoveNextUpTime,
        sapTlsMacMoveRateExcdLeft,
        sapTlsL2ptForceBoundary,
        sapTlsLimitMacMoveLevel,
        sapTlsBpduTransOper,
        sapTlsDefMsapPolicy,
        sapTlsL2ptProtocols,
        sapTlsL2ptForceProtocols,
        sapTlsDhcpMsapTrigger,
        sapTlsDhcpProxyLeaseTime,
        sapTlsDhcpRemoteId,
        sapTlsMrpJoinTime,
        sapTlsMrpLeaveTime,
        sapTlsMrpLeaveAllTime,
        sapTlsMrpPeriodicTime,
        sapTlsMrpPeriodicEnabled,
        sapTlsPppoePolicy,
        sapTlsMrpPolicy,
        sapTlsSiteName,
        sapTlsDhcp6MsapTrigger
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP TLS capabilities on
         Nokia SROS series systems release 15.0."
    ::= { tmnxSapGroups 510 }

tmnxSapTlsEgrMcastObsoletedGroup OBJECT-GROUP
    OBJECTS     {
        sapTlsEgressMcastGroup
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted sap egress multicast group objects on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 511 }

tmnxSapMsapV15v0Group            OBJECT-GROUP
    OBJECTS     {
        msapPlcyRowStatus,
        msapPlcyLastChanged,
        msapPlcyDescription,
        msapPlcyCpmProtPolicyId,
        msapPlcyCpmProtMonitorMac,
        msapPlcySubMgmtDefSubId,
        msapPlcySubMgmtDefSubIdStr,
        msapPlcySubMgmtDefSubProfile,
        msapPlcySubMgmtDefSlaProfile,
        msapPlcySubMgmtSubIdPlcy,
        msapPlcySubMgmtSubscriberLimit,
        msapPlcySubMgmtProfiledTrafOnly,
        msapPlcySubMgmtNonSubTrafSubId,
        msapPlcySubMgmtNonSubTrafSubProf,
        msapPlcySubMgmtNonSubTrafSlaProf,
        msapPlcySubMgmtDefInterDestId,
        msapPlcySubMgmtDefInterDestIdStr,
        msapPlcyAssociatedMsaps,
        msapPlcyIgmpTrkExpiryTime,
        msapPlcyIgmpTrkImportPlcy,
        msapPlcyIgmpTrkMaxNbrGrps,
        msapPlcyIgmpTrkMaxNbrSrcs,
        msapTlsPlcyLastChanged,
        msapTlsPlcySplitHorizonGrp,
        msapTlsPlcyArpReplyAgent,
        msapTlsPlcySubMgmtMacDaHashing,
        msapTlsPlcyDhcpLeasePopulate,
        msapTlsPlcyDhcpPrxyAdminState,
        msapTlsPlcyDhcpPrxyServAddr,
        msapTlsPlcyDhcpPrxyServAddrType,
        msapTlsPlcyDhcpPrxyLTRadOverride,
        msapTlsPlcyDhcpInfoAction,
        msapTlsPlcyDhcpCircuitId,
        msapTlsPlcyDhcpRemoteId,
        msapTlsPlcyDhcpRemoteIdString,
        msapTlsPlcyDhcpVendorInclOpts,
        msapTlsPlcyDhcpVendorOptStr,
        msapTlsPlcyDhcpPrxyLeaseTime,
        msapTlsPlcyIgmpSnpgImportPlcy,
        msapTlsPlcyIgmpSnpgFastLeave,
        msapTlsPlcyIgmpSnpgSendQueries,
        msapTlsPlcyIgmpSnpgGenQueryIntv,
        msapTlsPlcyIgmpSnpgQueryRespIntv,
        msapTlsPlcyIgmpSnpgRobustCount,
        msapTlsPlcyIgmpSnpgLastMembIntvl,
        msapTlsPlcyIgmpSnpgMaxNbrGrps,
        msapTlsPlcyIgmpSnpgMvrFromVplsId,
        msapTlsPlcyIgmpSnpgVersion,
        msapTlsPlcyIgmpSnpgMcacPlcyName,
        msapTlsPlcyIgmpSnpgMcacPrRsvMnBW,
        msapTlsPlcyIgmpSnpgMcacUncnstBW,
        msapTlsPlcyEgrQosPolicyId,
        msapL3PlcyEgrQosPolicyId,
        msapIgmpSnpgMcacLevelRowStatus,
        msapIgmpSnpgMcacLevelLastChanged,
        msapIgmpSnpgMcacLevelBW,
        msapIgmpSnpgMcacLagRowStatus,
        msapIgmpSnpgMcacLagLastChanged,
        msapIgmpSnpgMcacLagLevel,
        msapInfoCreationSapPortEncapVal,
        msapInfoCreationPlcyName,
        msapInfoReEvalPolicy,
        msapInfoLastChanged,
        msapCaptureSapStatsPktsRecvd,
        msapCaptureSapStatsPktsRedirect,
        msapCaptureSapStatsPktsDropped,
        msapPlcyTblLastChgd,
        msapTlsPlcyTblLastChgd,
        msapIgmpSnpgMcacLvlTblLastChgd,
        msapIgmpSnpgMcacLagTblLastChgd,
        msapInfoTblLastChgd
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of managed SAP capabilities
         on Nokia SROS series systems release 15.0."
    ::= { tmnxSapGroups 512 }

tmnxMsapTlsEgrObsoletedGroup     OBJECT-GROUP
    OBJECTS     {
        msapTlsPlcyEgressMcastGroup
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted managed sap egress multicast group objects on
         Nokia SROS series systems."
    ::= { tmnxSapGroups 513 }

tSapQosQGrpIngRedirectListGroup  OBJECT-GROUP
    OBJECTS     {
        sapIngQGrpRedirectList
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP QoS ingress
         queue-group redirect list configuration on Nokia SROS series systems
         15.0."
    ::= { tmnxSapGroups 514 }

tSapQosQGrpEgrRedirectListGroup  OBJECT-GROUP
    OBJECTS     {
        sapEgrQGrpRedirectList
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP QoS egress
         queue-group redirect list configuration on Nokia SROS series systems
         15.0."
    ::= { tmnxSapGroups 515 }

tSapIpTnlTcpMssAdjustV15v0Grp    OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelPubTcpMssAdjust,
        tmnxIpTunnelPrivTcpMssAdjust
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the IP tunnel TCP MSS
         adjustment capability on Nokia SROS series systems for release 15.0."
    ::= { tmnxSapGroups 516 }

tmnxSapPlcrV15v0Group            OBJECT-GROUP
    OBJECTS     {
        sapIngPlcrCtrlOvrLastChgd,
        sapIngPlcrCtrlOvrLvlLastChgd,
        sapIngPlcrCtrlOvrLvlMBS,
        sapIngPlcrCtrlOvrLvlTblLastChgd,
        sapIngPlcrCtrlOvrMinMBSSep,
        sapIngPlcrCtrlOvrRowStatus,
        sapIngPlcrCtrlOvrTblLastChgd,
        sapIngPlcrOvrAdminCIR,
        sapIngPlcrOvrAdminPIR,
        sapIngPlcrOvrCBS,
        sapIngPlcrOvrPktOffset,
        sapIngPlcrOvrLastChgd,
        sapIngPlcrOvrMBS,
        sapIngPlcrOvrRowStatus,
        sapIngPlcrOvrStatMode,
        sapIngPlcrOvrTblLastChgd,
        sapEgrPlcrCtrlOvrLastChgd,
        sapEgrPlcrCtrlOvrLvlLastChgd,
        sapEgrPlcrCtrlOvrLvlMBS,
        sapEgrPlcrCtrlOvrLvlTblLastChgd,
        sapEgrPlcrCtrlOvrMinMBSSep,
        sapEgrPlcrCtrlOvrRowStatus,
        sapEgrPlcrCtrlOvrTblLastChgd,
        sapEgrPlcrOvrAdminCIR,
        sapEgrPlcrOvrAdminPIR,
        sapEgrPlcrOvrCBS,
        sapEgrPlcrOvrPktOffset,
        sapEgrPlcrOvrLastChgd,
        sapEgrPlcrOvrMBS,
        sapEgrPlcrOvrRowStatus,
        sapEgrPlcrOvrStatMode,
        sapEgrPlcrOvrTblLastChgd
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of SAP Policer on Nokia
         SROS series systems."
    ::= { tmnxSapGroups 517 }

tmnxSapQosHsWrrGrpOvrGroup       OBJECT-GROUP
    OBJECTS     {
        sapEgrQosHsWrrGrpTblLastChanged,
        sapEgrQosHsWrrGrpRowStatus,
        sapEgrQosHsWrrGrpLastChanged,
        sapEgrQosHsWrrGrpRate,
        sapEgrQosHsWrrGrpRatePercent,
        sapEgrQosHsWrrGrpClassWeight
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP egress Hs Wrr
         Group override feature on Nokia SROS series systems added in release
         15.0."
    ::= { tmnxSapGroups 518 }

sapEvpnMhEthSegV15v0Group        OBJECT-GROUP
    OBJECTS     {
        sapEvpnMHEthSegStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting VXLAN MH feature on Nokia SROS series
         systems release 15.0."
    ::= { tmnxSapGroups 520 }

tmnxSapQosQBurstLimitOvrGrp      OBJECT-GROUP
    OBJECTS     {
        sapEgrQosQBurstLimit
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP egress QoS queue
         override feature on Nokia SROS series systems added in release 15.4."
    ::= { tmnxSapGroups 521 }

sapPppoeRedirectGroup            OBJECT-GROUP
    OBJECTS     {
        sapFwdWhlSaleEpipeSvcId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting PPPoE redirect on subscriber SAP
         feature on Nokia SROS series systems release 16.0."
    ::= { tmnxSapGroups 522 }

tmnxIpTunnelV16v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelDeliverySvcName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting IP tunnel feature on Nokia SROS series
         systems release 16.0."
    ::= { tmnxSapGroups 523 }

tmnxSapQosPlcrOvrV15v1Group      OBJECT-GROUP
    OBJECTS     {
        sapIngPlcrCtrlOvrLastChgd,
        sapIngPlcrCtrlOvrLvlLastChgd,
        sapIngPlcrCtrlOvrLvlMBS,
        sapIngPlcrCtrlOvrLvlTblLastChgd,
        sapIngPlcrCtrlOvrMinMBSSep,
        sapIngPlcrCtrlOvrRowStatus,
        sapIngPlcrCtrlOvrTblLastChgd,
        sapIngPlcrOvrCBS,
        sapIngPlcrOvrPktOffset,
        sapIngPlcrOvrLastChgd,
        sapIngPlcrOvrMBS,
        sapIngPlcrOvrRowStatus,
        sapIngPlcrOvrStatMode,
        sapIngPlcrOvrTblLastChgd,
        sapEgrPlcrCtrlOvrLastChgd,
        sapEgrPlcrCtrlOvrLvlLastChgd,
        sapEgrPlcrCtrlOvrLvlMBS,
        sapEgrPlcrCtrlOvrLvlTblLastChgd,
        sapEgrPlcrCtrlOvrMinMBSSep,
        sapEgrPlcrCtrlOvrRowStatus,
        sapEgrPlcrCtrlOvrTblLastChgd,
        sapEgrPlcrOvrCBS,
        sapEgrPlcrOvrPktOffset,
        sapEgrPlcrOvrLastChgd,
        sapEgrPlcrOvrMBS,
        sapEgrPlcrOvrRowStatus,
        sapEgrPlcrOvrStatMode,
        sapEgrPlcrOvrTblLastChgd,
        sapIngPlcrOvrAdminPIRHi,
        sapIngPlcrOvrAdminPIRLo,
        sapIngPlcrOvrAdminCIRHi,
        sapIngPlcrOvrAdminCIRLo,
        sapEgrPlcrOvrAdminPIRHi,
        sapEgrPlcrOvrAdminPIRLo,
        sapEgrPlcrOvrAdminCIRHi,
        sapEgrPlcrOvrAdminCIRLo
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP QoS policer override
         feature on Nokia SROS series systems release 15.1."
    ::= { tmnxSapGroups 524 }

tmnxSapQosPlcrOvrObsoletedGroup  OBJECT-GROUP
    OBJECTS     {
        sapIngPlcrOvrAdminPIR,
        sapIngPlcrOvrAdminCIR,
        sapEgrPlcrOvrAdminPIR,
        sapEgrPlcrOvrAdminCIR
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of SAP QoS
         policer override feature on Nokia SROS series systems release 15.1."
    ::= { tmnxSapGroups 525 }

tmnxSapTemplateQosV16v0Group     OBJECT-GROUP
    OBJECTS     {
        sapTmplIngressQosPolicyName,
        sapTmplEgressQosPolicyName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP templates QoS
         feature on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 526 }

tmnxSapTmplFilterNameV16v0Group  OBJECT-GROUP
    OBJECTS     {
        sapTmplIngressIpFilterName,
        sapTmplEgressIpFilterName,
        sapTmplIngressIpv6FilterName,
        sapTmplEgressIpv6FilterName,
        sapTmplIngressMacFilterName,
        sapTmplEgressMacFilterName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP templates Filter
         feature on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 527 }

tmnxSapL2tpv3ExtGroup            OBJECT-GROUP
    OBJECTS     {
        sapL2tpv3ServiceName
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects supporting management of the SAP
         L2TPV3 feature on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 528 }

tmnxSapIngressQinqV16v0Group     OBJECT-GROUP
    OBJECTS     {
        sapIngressQinqTranslation,
        sapIngressQinqInnerTranslationId,
        sapIngressQinqOuterTranslationId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Qinq preserve and
         translation feature on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 529 }

tmnxSapL2tpv3V16v0Group          OBJECT-GROUP
    OBJECTS     {
        sapL2tpv3TableLastChanged,
        sapL2tpv3RowStatus,
        sapL2tpv3LastChanged,
        sapL2tpv3ServiceId,
        sapL2tpv3RouterId,
        sapL2tpv3TunnelGroupName,
        sapL2tpv3VcId,
        sapL2tpv3PwType,
        sapL2tpv3AdminState,
        sapL2tpv3OperState,
        sapL2tpv3TunnelStatus,
        sapL2tpv3OperFlags,
        sapL2tpv3LastOperChgd,
        sapL2tpv3EthVlanQtag
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP L2TPV3 feature
         on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 530 }

tmnxSapL2tpv3ObsoletedGroup      OBJECT-GROUP
    OBJECTS     {
        sapL2tpv3HostISA
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of the SAP L2TPV3
         feature on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 531 }

tmnxSapPfcpV19v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxSapPfcpTableLastChanged,
        tmnxSapPfcpLastChanged,
        tmnxSapPfcpAssociation
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of Qinq preserve and
         translation feature on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 532 }

tmnxSapBaseStatsAggregateGroup   OBJECT-GROUP
    OBJECTS     {
        sapBaseStatsIngAggregateOffPkts,
        sapBaseStatsIngAggregateOffOcts,
        sapBaseStatsIngAggregateFwdPkts,
        sapBaseStatsIngAggregateFwdOcts,
        sapBaseStatsEgrAggregateFwdPkts,
        sapBaseStatsEgrAggregateFwdOcts,
        sapBaseStatsIngAggregateDropPkts,
        sapBaseStatsIngAggregateDropOcts,
        sapBaseStatsEgrAggregateDropPkts,
        sapBaseStatsEgrAggregateDropOcts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of aggregate SAP statistics
         on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 533 }

tmnxSapOperStatusGroup           OBJECT-GROUP
    OBJECTS     {
        tmnxSapOperStatus,
        tmnxSapOperFlags
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP operational
         information on Nokia SROS series systems in release 16.0."
    ::= { tmnxSapGroups 534 }

tmnxSapInfoV19v0Group            OBJECT-GROUP
    OBJECTS     {
        sapNumEntries,
        sapPortId,
        sapEncapValue,
        sapRowStatus,
        sapType,
        sapDescription,
        sapAdminStatus,
        sapOperStatus,
        sapIngressQosPolicyId,
        sapIngressMacFilterId,
        sapIngressIpFilterId,
        sapIngressVlanTranslationId,
        sapEgressQosPolicyId,
        sapEgressMacFilterId,
        sapEgressIpFilterId,
        sapMirrorStatus,
        sapIesIfIndex,
        sapLastMgmtChange,
        sapCollectAcctStats,
        sapAccountingPolicyId,
        sapVpnId,
        sapCustId,
        sapCustMultSvcSite,
        sapIngressQosSchedulerPolicy,
        sapEgressQosSchedulerPolicy,
        sapSplitHorizonGrp,
        sapIngressSharedQueuePolicy,
        sapIngressMatchQinQDot1PBits,
        sapLastStatusChange,
        sapAntiSpoofing,
        sapIngUseMultipointShared,
        sapEgressQinQMarkTopOnly,
        sapEndPoint,
        sapIngressVlanTranslation,
        sapSubType,
        sapCpmProtPolicyId,
        sapCpmProtMonitorMac,
        sapEgressFrameBasedAccounting,
        sapEthernetLLFAdminStatus,
        sapEthernetLLFOperStatus,
        sapTlsMvplsRowStatus,
        sapEgressFrameBasedAccounting,
        sapCallingStationId,
        sapIngPolicerPolicy,
        sapEgrPolicerPolicy,
        sapIpv6HostInfoIpoeDhcp6Hosts,
        sapIpv6HostInfoPppDhcp6Hosts,
        sapIpv6HostInfoPppSLAACHosts,
        sapIngQosQMBSBytes,
        sapEgrQosQMBSBytes,
        sapEgressQosEgrRemarkPlcy,
        sapMulticastSource
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP capabilities for
         19.0 release on Nokia SROS series systems."
    ::= { tmnxSapGroups 535 }

tmnxSapOperObsoletedGroup        OBJECT-GROUP
    OBJECTS     {
        sapOperFlags
    }
    STATUS      current
    DESCRIPTION
        "The group of obsoleted objects supporting management of the SAP
         operational status feature on Nokia SROS series systems in release
         16.0."
    ::= { tmnxSapGroups 536 }

tmnxSapBWGroup                   OBJECT-GROUP
    OBJECTS     {
        sapBandwidthHi
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP operational
         status feature on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 537 }

tmnxSapQtagV19v0Group            OBJECT-GROUP
    OBJECTS     {
        sapIngQtagManipulationOuterTag,
        sapIngQtagManipulationInnerTag,
        sapIngQtagManipulationAction,
        sapEgrQtagManipulationAction
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP q-tag
         manipulation on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 538 }

tmnxSapVlanQosPlcyV19v0Group     OBJECT-GROUP
    OBJECTS     {
        sapEgressQosVlanQosPlcy
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP Vlan QoS Policy
         on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 539 }

tmnxSapEgrAggRateCIRV19v0Group   OBJECT-GROUP
    OBJECTS     {
        sapEgressAggRateCIRLmt
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP Egress Aggregate
         Rate CIR on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 540 }

tmnxSapIgPlcyPlcerStatV19v0Group OBJECT-GROUP
    OBJECTS     {
        sapIngQosPStatsDrpExdProfPkts,
        sapIngQosPStatsDrpExdProfOcts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP Ingress Policy
         policer stats for drop counters on Nokia SROS series systems in
         release 19.0."
    ::= { tmnxSapGroups 541 }

tmnxSapIngressAggRateV19v0Group  OBJECT-GROUP
    OBJECTS     {
        sapIngressAggregatePolicerRateLo,
        sapIngressAggregatePolicerRateHi,
        sapIngressAggregatePolicerBurst
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP Ingress
         Aggregate Rate on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 542 }

tmnxIpTunnelEsaVmV19v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelHostEsa,
        tmnxIpTunnelHostEsaVm
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of IP tunnel functions on
         ESA virtual machines in release 19.0"
    ::= { tmnxSapGroups 543 }

sapNotifyObjsPortStateGroup      OBJECT-GROUP
    OBJECTS     {
        sapNotifyPortState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting notifications of the state of the port
         on Nokia SROS systems."
    ::= { tmnxSapGroups 544 }

tmnxSapQosStatsV19v0Group        OBJECT-GROUP
    OBJECTS     {
        sapEgrQosQStatsFwdExdProfPkts,
        sapEgrQosQStatsDrpExdProfPkts,
        sapEgrQosQStatsFwdExdProfOcts,
        sapEgrQosQStatsDrpExdProfOcts,
        sapEgrQosQStatsFwdInPlusProfPkts,
        sapEgrQosQStatsDrpInPlusProfPkts,
        sapEgrQosQStatsFwdInPlusProfOcts,
        sapEgrQosQStatsDrpInPlusProfOcts,
        sapEgrQosQStatsFwdPkts,
        sapEgrQosQStatsDrpPkts,
        sapEgrQosQStatsFwdOcts,
        sapEgrQosQStatsDrpOcts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Ingress/Egress QoS
         capabilities on Nokia SROS series systems in release 19.0."
    ::= { tmnxSapGroups 545 }

sapNotifyV20v0Group              NOTIFICATION-GROUP
    NOTIFICATIONS {
        sapReceivedPbbProtSrcMac
    }
    STATUS      current
    DESCRIPTION
        "The group notification supporting Auto learn mac protect
         feature for EVPN  feature on Nokia SROS series systems release 20.0."
    ::= { tmnxSapGroups 546 }

sapTlsMacListV20v0Group          OBJECT-GROUP
    OBJECTS     {
        sapTlsAutoLrnMacProtectExcList
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the auto learn Mac list
         exclusion feature on Nokia SROS series systems in release 20.0."
    ::= { tmnxSapGroups 547 }

sapTlsBgpVplsEvpnV20v0Group      OBJECT-GROUP
    OBJECTS     {
        sapTlsExBgpVplsMhVeId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the BGP-VPLS EVPN
         interworking feature on Nokia SROS series systems in release 20.0."
    ::= { tmnxSapGroups 548 }

tmnxSapStickyMsapV20v0Group      OBJECT-GROUP
    OBJECTS     {
        msapPlcyStickyTimeout,
        msapInfoStickyExpiryTime
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of sticky managed SAPs on
         Nokia SROS release 20 series systems."
    ::= { tmnxSapGroups 549 }

tmnxSapEgrQMonQDepthV20v0Group   OBJECT-GROUP
    OBJECTS     {
        sapEgrQosQMonitorQueueDepth,
        sapEgrQosQFastPolling,
        sapEgrQosQViolationThreshold,
        sapEgrQosQueueDepthViolTotCnt,
        sapEgrQosQueueDepthViolLast,
        sapEgrQosQueueDepthHWMPollInt
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting Faster Polling Queue Depth Monitoring
         with Telemetry on Nokia SROS release 20 series systems."
    ::= { tmnxSapGroups 550 }

sapIngTrtcm2AggRateV20v10Group   OBJECT-GROUP
    OBJECTS     {
        sapIngressAggregatePolicerCIRHi,
        sapIngressAggregatePolicerCIRLo,
        sapIngressAggregatePolicerCBS
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the SAP Ingress trtcm2
         aggregate policers on Nokia SROS series systems in release 20.10."
    ::= { tmnxSapGroups 551 }

tmnxIpTnlTransProfV21v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxIpTunnelIPsecTransportMdProf,
        tmnxIpTnlIPsecIsakmpState,
        tmnxIpTnlIPsecIsakmpEstabTime,
        tmnxIpTnlIPsecIsakmpNegLifeTime,
        tmnxIpTnlIPsecNumDpdTx,
        tmnxIpTnlIPsecNumDpdRx,
        tmnxIpTnlIPsecNumDpdAckTx,
        tmnxIpTnlIPsecNumDpdAckRx,
        tmnxIpTnlIPsecNumExpRx,
        tmnxIpTnlIPsecNumInvalidDpdRx,
        tmnxIpTnlIPsecNumCtrlPktsTx,
        tmnxIpTnlIPsecNumCtrlPktsRx,
        tmnxIpTnlIPsecNumCtrlTxErrors,
        tmnxIpTnlIPsecNumCtrlRxErrors,
        tmnxIpTnlIPsecMatCertEntryId,
        tmnxIpTnlIPsecCertProfName,
        tmnxIpTnlIPsecIsakmpPathMtu,
        tmnxIpTnlIPsecStatIsakmpAuthAlg,
        tmnxIpTnlIPsecStatIsakmpEncrAlg,
        tmnxIpTnlIPsecStatIsakmpPfsDhGp,
        tmnxIpTnlIPsecStatIkeTranPrfAlg,
        tmnxIpTnlIPsecMatchTrustAnchor,
        tmnxIpTnlIPsecSAType,
        tmnxIpTnlIPsecSASpi,
        tmnxIpTnlIPsecSAAuthAlgorithm,
        tmnxIpTnlIPsecSAEncrAlgorithm,
        tmnxIpTnlIPsecSAEstablishedTime,
        tmnxIpTnlIPsecSANegLifeTime,
        tmnxIpTnlIPsecSAStBytesProcessed,
        tmnxIpTnlIPsecSAStBytesProcLow32,
        tmnxIpTnlIPsecSAStBytesProcHgh32,
        tmnxIpTnlIPsecSAStPktsProcessed,
        tmnxIpTnlIPsecSAStPktsProcLow32,
        tmnxIpTnlIPsecSAStPktsProcHigh32,
        tmnxIpTnlIPsecSAStCryptoErrors,
        tmnxIpTnlIPsecSAStReplayErrors,
        tmnxIpTnlIPsecSAStSAErrors,
        tmnxIpTnlIPsecSAStPolicyErrors,
        tmnxIpTnlIPsecSAStEncapOverhead,
        tmnxIpTnlIPsecSAStPfsDhGroup,
        tmnxIpTnlIPsecSAStESN
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the IPsec transport mode
         on Nokia SROS series systems in release 21.0."
    ::= { tmnxSapGroups 552 }

sapCfmSquelchInCtagGroup         OBJECT-GROUP
    OBJECTS     {
        sapEthCfmSquelchIngressCtag,
        sapTmplEthCfmSquelchIngressCtag
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting Ethernet Connectivity Fault Management
         (ETH-CFM) SAP squelching for the PVLAN space on Nokia SROS series
         systems."
    ::= { tmnxSapGroups 553 }

sapIngressIPCritOvrV20v10Group   OBJECT-GROUP
    OBJECTS     {
        sapIngressIPCriteriaOvrTag,
        sapIngressIPv6CriteriaOvrTag
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting IP Criteria overrides for SAP ingress
         on Nokia SROS series systems."
    ::= { tmnxSapGroups 554 }

sapHsmdaObsoleteV21v0Group       OBJECT-GROUP
    OBJECTS     {
        sapEgressHsmdaShaperOverride,
        sapEgressHsmdaPacketOffOverride,
        sapEgrQosHsmdaQueueRowStatus,
        sapEgrQosHsmdaQueueLastChanged,
        sapEgrQosHsmdaQueueAdminPIR,
        sapEgrQosHsmdaQueueAdminCIR,
        sapEgrQosHsmdaQueueSlopePolicy,
        sapEgrHsmdaQStatCustId,
        sapEgrHsmdaQStatInProfPktFwd,
        sapEgrHsmdaQStatInProfPktDropd,
        sapEgrHsmdaQStatOutProfPktFwd,
        sapEgrHsmdaQStatOutProfPktDropd,
        sapEgrHsmdaQStatInProfOctFwd,
        sapEgrHsmdaQStatInProfOctDropd,
        sapEgrHsmdaQStatOutProfOctFwd,
        sapEgrHsmdaQStatOutProfOctDropd,
        sapEgrHsmdaCntrStCustId,
        sapEgrHsmdaCntrStInProfPktFwd,
        sapEgrHsmdaCntrStInProfPktDrop,
        sapEgrHsmdaCntrStOutProfPktFwd,
        sapEgrHsmdaCntrStOutProfPktDrop,
        sapEgrHsmdaCntrStInProfOctFwd,
        sapEgrHsmdaCntrStInProfOctDrop,
        sapEgrHsmdaCntrStOutProfOctFwd,
        sapEgrHsmdaCntrStOutProfOctDrop,
        sapEgrQosHsmdaQueueMBS,
        sapEgrQosHsmdaQueueWrrWeight,
        sapEgressHsmdaWrrPolicyOvr
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP Egress QOS Hsmda
         capabilities on Nokia SROS series systems release 9.0."
    ::= { tmnxSapGroups 556 }

sapQueueOvrObsoleteV21v0Group    OBJECT-GROUP
    OBJECTS     {
        sapEgrQosQMonitorDepth
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of QOS queue-overrides
         capabilities on Nokia SROS series systems release 13.0."
    ::= { tmnxSapGroups 557 }

tmnxSapQueueOvrV21v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngQosQMonitorDepth,
        sapIngQosQueueDepthPollPrcnt1,
        sapIngQosQueueDepthPollPrcnt2,
        sapIngQosQueueDepthPollPrcnt3,
        sapIngQosQueueDepthPollPrcnt4,
        sapIngQosQueueDepthPollPrcnt5,
        sapIngQosQueueDepthPollPrcnt6,
        sapIngQosQueueDepthPollPrcnt7,
        sapIngQosQueueDepthPollPrcnt8,
        sapIngQosQueueDepthPollPrcnt9,
        sapIngQosQueueDepthPollPrcnt10,
        sapIngQosQueueDepthAvgPollInt,
        sapIngQosQueueDepthAvgElpsdTme,
        sapEgrQosQueueDepthPollPrcnt1,
        sapEgrQosQueueDepthPollPrcnt2,
        sapEgrQosQueueDepthPollPrcnt3,
        sapEgrQosQueueDepthPollPrcnt4,
        sapEgrQosQueueDepthPollPrcnt5,
        sapEgrQosQueueDepthPollPrcnt6,
        sapEgrQosQueueDepthPollPrcnt7,
        sapEgrQosQueueDepthPollPrcnt8,
        sapEgrQosQueueDepthPollPrcnt9,
        sapEgrQosQueueDepthPollPrcnt10,
        sapEgrQosQueueDepthAvgPollInt,
        sapEgrQosQueueDepthAvgElpsdTme
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting QoS queue-overrides on SAP in release
         21.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 558 }

tmnxSapIngQMonQDepthV21v0Group   OBJECT-GROUP
    OBJECTS     {
        sapIngQosQMonitorQueueDepth,
        sapIngQosQFastPolling
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting Faster Polling Queue Depth Monitoring
         with Telemetry on Nokia SROS release 21 series systems."
    ::= { tmnxSapGroups 559 }

sapLastChangeV21v0Group          OBJECT-GROUP
    OBJECTS     {
        sapBaseTableLastChanged,
        sapTlsTableLastChanged,
        sapTlsLastMgmtChange
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting last-change objs on Nokia SROS release
         21 series systems."
    ::= { tmnxSapGroups 560 }

tmnxSapEgressHQosV21v0Group      OBJECT-GROUP
    OBJECTS     {
        sapEgrVlanQosPlcyPortRedirect
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting HQos on Nokia SROS release 21 series
         systems."
    ::= { tmnxSapGroups 561 }

tmnxSapSubV21v0Group             OBJECT-GROUP
    OBJECTS     {
        tmnxSapSubMonOperGrpTableLastCh,
        tmnxSapSubMonOperGrpRowStatus,
        tmnxSapSubMonOperGrpLastCh,
        tmnxSapSubMonOperGrpHlthDrop,
        tmnxSapSubMonOperGrpActHlthDrop,
        tmnxSapPfcpL2AccessIdAlias
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting subscriber management added on Nokia
         SROS release 21 series systems."
    ::= { tmnxSapGroups 562 }

sapIPFilterPairV22v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngressIpFilterPair
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of hardware aggregate
         shaping for SAP egress on Nokia SROS series systems."
    ::= { tmnxSapGroups 563 }

sapQueueOvrObsoleteV22v0Group    OBJECT-GROUP
    OBJECTS     {
        sapIngQosQMonitorDepth
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of QOS queue-overrides
         capabilities on Nokia SROS series systems release 13.0."
    ::= { tmnxSapGroups 564 }

tmnxSapQueueOvrV22v0Group        OBJECT-GROUP
    OBJECTS     {
        sapIngQosQueueDepthPollPrcnt1,
        sapIngQosQueueDepthPollPrcnt2,
        sapIngQosQueueDepthPollPrcnt3,
        sapIngQosQueueDepthPollPrcnt4,
        sapIngQosQueueDepthPollPrcnt5,
        sapIngQosQueueDepthPollPrcnt6,
        sapIngQosQueueDepthPollPrcnt7,
        sapIngQosQueueDepthPollPrcnt8,
        sapIngQosQueueDepthPollPrcnt9,
        sapIngQosQueueDepthPollPrcnt10,
        sapIngQosQueueDepthAvgPollInt,
        sapIngQosQueueDepthAvgElpsdTme,
        sapEgrQosQueueDepthPollPrcnt1,
        sapEgrQosQueueDepthPollPrcnt2,
        sapEgrQosQueueDepthPollPrcnt3,
        sapEgrQosQueueDepthPollPrcnt4,
        sapEgrQosQueueDepthPollPrcnt5,
        sapEgrQosQueueDepthPollPrcnt6,
        sapEgrQosQueueDepthPollPrcnt7,
        sapEgrQosQueueDepthPollPrcnt8,
        sapEgrQosQueueDepthPollPrcnt9,
        sapEgrQosQueueDepthPollPrcnt10,
        sapEgrQosQueueDepthAvgPollInt,
        sapEgrQosQueueDepthAvgElpsdTme
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting QoS queue-overrides on SAP in release
         22.0 of Nokia SROS series systems."
    ::= { tmnxSapGroups 565 }

tmnxSapStaticHostV22v0Group      OBJECT-GROUP
    OBJECTS     {
        sapStaticHostMRtMetric,
        sapStaticHostMRtPreference,
        sapStaticHostMRtTag,
        sapStatHost6MRtPreference,
        sapStatHost6MRtTag
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of SAP static hosts added
         in release 22 of the Nokia SROS series systems."
    ::= { tmnxSapGroups 566 }

tmnxDCSapCompliances             OBJECT IDENTIFIER ::= { tmnxSapConformance 3 }

tmnxDCSapGroups                  OBJECT IDENTIFIER ::= { tmnxSapConformance 4 }

tmnxMgSapCompliances             OBJECT IDENTIFIER ::= { tmnxSapConformance 5 }

tmnxMgSapGroups                  OBJECT IDENTIFIER ::= { tmnxSapConformance 6 }

sapTrapsPrefix                   OBJECT IDENTIFIER ::= { tmnxServNotifications 3 }

sapTraps                         OBJECT IDENTIFIER ::= { sapTrapsPrefix 0 }

sapCreated                       NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue
    }
    STATUS      obsolete
    DESCRIPTION
        "This trap is sent when a new row is created in the sapBaseInfoTable."
    ::= { sapTraps 1 }

sapDeleted                       NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue
    }
    STATUS      obsolete
    DESCRIPTION
        "This trap is sent when an existing row is deleted from the
         sapBaseInfoTable."
    ::= { sapTraps 2 }

sapStatusChanged                 NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        sapAdminStatus,
        tmnxSapOperStatus,
        tmnxSapOperFlags
    }
    STATUS      current
    DESCRIPTION
        "The sapStatusChanged notification is generated when there is a change
         in the administrative or operating status of an SAP.

         Notice that this trap is not generated whenever the SAP operating
         status change is caused by an operating status change on the
         associated access port."
    ::= { sapTraps 3 }

sapTlsMacAddrLimitAlarmRaised    NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The trap sapTlsMacAddrLimitAlarmRaised is sent whenever the number of
         MAC addresses stored in the FDB for this SAP increases to reach the
         watermark specified by the object svcTlsFdbTableFullHighWatermark."
    ::= { sapTraps 4 }

sapTlsMacAddrLimitAlarmCleared   NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The trap sapTlsMacAddrLimitAlarmCleared is sent whenever the number of
         MAC addresses stored in the FDB for this SAP drops to the watermark
         specified by the object svcTlsFdbTableFullLowWatermark."
    ::= { sapTraps 5 }

sapTlsDHCPLseStEntriesExceeded   NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        tlsDhcpLseStateNewCiAddr,
        tlsDhcpLseStateNewChAddr,
        tlsDHCPClientLease
    }
    STATUS      obsolete
    DESCRIPTION
        "The sapTlsDHCPLseStEntriesExceeded notification is
         generated when the number  of  DHCP  lease states
         entries on a given SAP reaches a user configurable
         upper limit given by sapTlsDhcpLeasePopulate."
    ::= { sapTraps 6 }

sapTlsDHCPLeaseStateOverride     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        tlsDhcpLseStateNewCiAddr,
        tlsDhcpLseStateNewChAddr,
        tlsDhcpLseStateOldCiAddr,
        tlsDhcpLseStateOldChAddr
    }
    STATUS      obsolete
    DESCRIPTION
        "The sapTlsDHCPLeaseStateOverride notification is generated when an
         existing DHCP lease state is overridden by a new lease state which has
         the same IP address but a different MAC address."
    ::= { sapTraps 7 }

sapTlsDHCPSuspiciousPcktRcvd     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        tlsDhcpPacketProblem
    }
    STATUS      obsolete
    DESCRIPTION
        "The sapTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP
         packet is received with suspicious content."
    ::= { sapTraps 8 }

sapDHCPLeaseEntriesExceeded      NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpLseStateNewCiAddr,
        svcDhcpLseStateNewChAddr,
        svcDhcpClientLease
    }
    STATUS      current
    DESCRIPTION
        "The sapDHCPLeaseEntriesExceeded notification is generated when the
         number of DHCP lease state entries on a given SAP reaches a user
         configurable upper limit. This limit is given by
         sapTlsDhcpLeasePopulate for a TLS service and by
         TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or VPRN service."
    ::= { sapTraps 9 }

sapDHCPLseStateOverride          NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpLseStateNewCiAddr,
        svcDhcpLseStateNewChAddr,
        svcDhcpLseStateOldCiAddr,
        svcDhcpLseStateOldChAddr
    }
    STATUS      current
    DESCRIPTION
        "The sapDHCPLseStateOverride notification is generated when an existing
         DHCP lease state is overridden by a new lease state which has the same
         IP address but a different MAC address."
    ::= { sapTraps 10 }

sapDHCPSuspiciousPcktRcvd        NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpPacketProblem
    }
    STATUS      current
    DESCRIPTION
        "The sapDHCPSuspiciousPcktRcvd notification is generated when a DHCP
         packet is received with suspicious content."
    ::= { sapTraps 11 }

sapDHCPLseStatePopulateErr       NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpLseStatePopulateError
    }
    STATUS      current
    DESCRIPTION
        "The sapDHCPLseStatePopulateErr notification indicates that the system
         was unable to update the DHCP Lease State table with the information
         contained in the DHCP ACK message. The DHCP ACK message has been
         discarded."
    ::= { sapTraps 12 }

hostConnectivityLost             NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        hostConnectivityCiAddrType,
        hostConnectivityCiAddr,
        hostConnectivityChAddr,
        sapNotifyIpAddrType,
        sapNotifyIpAddr
    }
    STATUS      current
    DESCRIPTION
        "The hostConnectivityLost notification indicates that the system lost
         the connectivity with the indicated host.

         The value of hostConnectivityCiAddr is the nominal IP address that
         identifies the host.

         The value of sapNotifyIpAddr is the IP address that was actually used
         for the host connectivity verification; the two may be different for a
         host with multiple IP addresses."
    ::= { sapTraps 13 }

hostConnectivityRestored         NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        hostConnectivityCiAddrType,
        hostConnectivityCiAddr,
        hostConnectivityChAddr,
        sapNotifyIpAddrType,
        sapNotifyIpAddr
    }
    STATUS      current
    DESCRIPTION
        "The hostConnectivityRestored notification indicates that the system
         has restored the connectivity with the indicated host.

         The value of hostConnectivityCiAddr is the nominal IP address that
         identifies the host.

         The value of sapNotifyIpAddr is the IP address that was actually used
         for the host connectivity verification; the two may be different for a
         host with multiple IP addresses."
    ::= { sapTraps 14 }

sapReceivedProtSrcMac            NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        protectedMacForNotify,
        sapTlsRestProtSrcMacAction
    }
    STATUS      current
    DESCRIPTION
        "The sapReceivedProtSrcMac notification is generated when a protected
         source MAC is received on a TLS SAP with sapTlsRestProtSrcMac 'true',
         or if the TLS SAP belongs to an SHG with tlsShgRestProtSrcMac 'true'."
    ::= { sapTraps 15 }

sapStaticHostDynMacConflict      NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        staticHostDynamicMacIpAddress,
        staticHostDynamicMacConflict
    }
    STATUS      current
    DESCRIPTION
        "The sapStaticHostDynMacConflict notification indicates that the system
         is trying to learn a conflicting IP-only static host dynamic MAC
         address (sapStaticHostDynMacAddress)."
    ::= { sapTraps 16 }

sapTlsMacMoveExceeded            NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        sapAdminStatus,
        sapOperStatus,
        sapTlsMacMoveRateExcdLeft,
        sapTlsMacMoveNextUpTime,
        svcTlsMacMoveMaxRate,
        sapTlsNotifyMacAddr
    }
    STATUS      current
    DESCRIPTION
        "The sapTlsMacMoveExceeded notification is generated when the SAP
         exceeds the TLS svcTlsMacMoveMaxRate."
    ::= { sapTraps 17 }

sapDHCPProxyServerError          NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpProxyError
    }
    STATUS      current
    DESCRIPTION
        "The sapDHCPProxyServerError notification indicates that the system was
         unable to proxy DHCP requests."
    ::= { sapTraps 18 }

sapDHCPCoAError                  NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpCoAError
    }
    STATUS      obsolete
    DESCRIPTION
        "The sapDHCPCoAError notification indicates that the system was unable
         to process a Change of Authorization (CoA) request from a Radius
         server."
    ::= { sapTraps 19 }

sapDHCPSubAuthError              NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcDhcpSubAuthError
    }
    STATUS      obsolete
    DESCRIPTION
        "The sapDHCPSubAuthError notification indicates that the system
         encountered a problem while trying to authenticate a subscriber."
    ::= { sapTraps 20 }

sapPortStateChangeProcessed      NOTIFICATION-TYPE
    OBJECTS     {
        sapNotifyPortId,
        sapNotifyPortState
    }
    STATUS      current
    DESCRIPTION
        "The sapPortStateChangeProcessed notification indicates that the agent
         has finished processing an access port state change event, and that
         the operating status of all the affected SAPs has been updated
         accordingly. The value of the sapNotifyPortId object indicates the ID
         of the port that experienced the state change. The value of the
         sapNotifyPortState object indicates the current state of the port."
    ::= { sapTraps 21 }

sapDHCPLseStateMobilityError     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The sapDHCPLseStateMobilityError notification indicates that the
         system was unable to perform a mobility check for this lease state."
    ::= { sapTraps 22 }

sapCemPacketDefectAlarm          NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcVpnId,
        sapCemReportAlarmStatus,
        tmnxPortCemStatsReportAlarm
    }
    STATUS      current
    DESCRIPTION
        "Generated when a CEM SAP alarm condition is detected. It is generated
         only when the packet error indicated by 'sapCemReportAlarmStatus'
         persists over a 3 second window. tmnxPortCemStatsReportAlarm
         specifies, in the case of APS Ports, the physical port raising the
         trap, otherwise it is the SAP's port."
    ::= { sapTraps 23 }

sapCemPacketDefectAlarmClear     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcVpnId,
        sapCemReportAlarmStatus,
        tmnxPortCemStatsReportAlarm
    }
    STATUS      current
    DESCRIPTION
        "Generated when a CEM SAP alarm condition is cleared. It is generated
         only when the packet error indicated by 'sapCemReportAlarmStatus' no
         longer persists over a 10 second window. tmnxPortCemStatsReportAlarm
         specifies, in the case of APS Ports, the physical port raising the
         trap, otherwise it is the SAP's port."
    ::= { sapTraps 24 }

msapStateChanged                 NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        msapStatus
    }
    STATUS      current
    DESCRIPTION
        "The msapStateChanged notification is generated when a Managed SAP is
         'created', 'modified', or 'deleted', with the value of msapStatus
         indicated which state it has entered."
    ::= { sapTraps 25 }

msapCreationFailure              NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcManagedSapCreationError,
        sapNotifyPortId,
        sapNotifyEncapValue,
        sapTlsNotifyMacAddr
    }
    STATUS      current
    DESCRIPTION
        "The trap msapCreationFailure is sent whenever the system fails to
         create a managed SAP. The svcId, svcVpnId, sapPortId and sapEncapValue
         are those of the capturing SAP.

         The values of sapNotifyPortId and sapNotifyEncapValue correspond to
         the managed SAP, and the value of sapTlsNotifyMacAddr is the MAC
         address that would have been associated with the managed SAP, if the
         creation would have succeeded."
    ::= { sapTraps 26 }

sapHostBGPPeeringSetupFailed     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        sapBGPPeeringHostIpAddr,
        sapBGPPeeringHostIpAddrType,
        sapBGPPeeringVRtrID,
        sapBGPPeeringAttrDiscarded,
        sapBGPPeeringNotifDescription
    }
    STATUS      current
    DESCRIPTION
        "The sapHostBGPPeeringSetupFailed notification indicates that the
         system was unable to create a BGP neighbor and set up BGP peering for
         the given host."
    ::= { sapTraps 27 }

sapTlsDataSapInstStatusChgd      NOTIFICATION-TYPE
    OBJECTS     {
        sapTlsDataSapInstStatus,
        sapTlsDataSapInstLastErr
    }
    STATUS      current
    DESCRIPTION
        "The sapTlsDataSapInstStatusChgd notification is generated when there
         is a change in the value of sapTlsDataSapInstStatus object.

         sapTlsDataSapInstLastErr provides information related to
         sapTlsDataSapInstStatus object."
    ::= { sapTraps 28 }

tmnxGreTunnelOperRemIpChg        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxGreTunnelOperRemIpAddrType,
        tmnxGreTunnelOperRemIpAddr
    }
    STATUS      obsolete
    DESCRIPTION
        "[CAUSE] The tmnxGreTunnelOperRemIpChg notification is generated when
         there is a change in operational remote address
         'tmnxGreTunnelOperRemIpAddr' of the tunnel.

         [EFFECT] Operational state of the tunnel is not affected.

         [RECOVERY] Operator needs to look at the configuration of
         tmnxGreTunnelRemIpAddr and tmnxGreTunnelBackupRemIpAddr."
    ::= { sapTraps 29 }

sapTunnelStateChange             NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTunnelNotifyName,
        sapTunnelNotifyState,
        sapTunnelNotifyReason
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapTunnelStateChange notification is generated when
         IPsec/GRE tunnel indicated by sapTunnelNotifyName changes state to
         'down' due to sapTunnelNotifyReason.

         [EFFECT] IPsec/GRE tunnel associated with the SAP will remain in this
         state until a corrective action is taken.

         [RECOVERY] Depending on the reason indicated by sapTunnelNotifyReason,
         corrective action should be taken."
    ::= { sapTraps 30 }

sapAtmPppSessionFailure          NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        sapNotifyName,
        sapNotifyReason
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapAtmPppSessionFailure notification indicates that the
         system could not create a new PPPoA session.

         The problem is described in the object sapNotifyReason.

         The PPP user name is specified in the sapNotifyName.

         [EFFECT] The user that attempted to set up the PPP session cannot
         establish the desired connection.

         [RECOVERY] Depending on the reason indicated by sapNotifyReason,
         corrective action may be necessary. However, it is possible that the
         failure is caused by the user's equipment configuration or by
         erroneous input by the user."
    ::= { sapTraps 31 }

sapAtmPppNcpFailure              NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        sapNotifyName,
        sapPppNcpFailureProtocol,
        sapNotifyReason
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapAtmPppNcpFailure notification indicates that there is a
         NCP phase setup problem.

         The problem is described in the object sapNotifyReason.

         The PPP user name is specified in the sapNotifyName.

         [EFFECT] The IP protocol cannot be configured for the user that
         attempted to set up the PPP session.

         [RECOVERY] Depending on the reason indicated by sapNotifyReason,
         corrective action may be necessary. However, it is possible that the
         failure is caused by the user's equipment configuration or by
         erroneous input by the user."
    ::= { sapTraps 32 }

sapIpipeCeIpAddrChange           NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        sapIpipeCeIpAddrType,
        sapIpipeCeIpAddress
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapIpipeCeIpAddrChange notification indicates that an IP
         address has been discovered for the local end host of a specified
         IPIPE SAP. The IP address type is specified by sapIpipeCeIpAddrType.
         The IP address is specified by sapIpipeCeIpAddress.

         [EFFECT] The IP address specified by sapIpipeCeIpAddress and of type
         sapIpipeCeIpAddrType has been discovered for the local end host.

         [RECOVERY]  No action is required"
    ::= { sapTraps 33 }

tmnxIpTunnelOperRemIpChg         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxIpTunnelOperRemIpAddrType,
        tmnxIpTunnelOperRemIpAddr
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxIpTunnelOperRemIpChg notification is generated when
         there is a change in operational remote address
         'tmnxIpTunnelOperRemIpAddr' of the tunnel.

         [EFFECT] Operational state of the tunnel is not affected.

         [RECOVERY] Operator needs to look at the configuration of
         tmnxIpTunnelRemIpAddr and tmnxIpTunnelBackupRemIpAddr."
    ::= { sapTraps 38 }

sapDcpStaticExcd                 NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpStaticExcdCountHi,
        sapDcpFpStaticExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpStaticExcd notification is generated when the
         static-policer on a particular SAP has been detected as non-conformant
         to the associated distributed CPU protection policy parameters. This
         notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured
         to 'enable' or 'verbose'.

         [EFFECT] The affected SAP may be using more resources than expected
         and cause the system to underperform. This notification may indicate a
         Denial of Service attack or a misconfiguration in the network.

         [RECOVERY] Appropriate configuration changes to the distributed CPU
         protection policy or to the affected SAP may be required."
    ::= { sapTraps 39 }

sapDcpDynamicExcd                NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpDynExcdCountHi,
        sapDcpFpDynExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpDynamicExcd notification is generated when the
         protocol on a particular SAP has been detected as non-conformant to
         the associated distributed CPU protection policy parameters. This
         notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is
         configured to 'enable' or 'verbose'.

         [EFFECT] The affected SAP may be using more resources than expected
         and cause the system to underperform. This notification may indicate a
         Denial of Service attack or a misconfiguration in the network.

         [RECOVERY] Appropriate configuration changes to the distributed CPU
         protection policy or to the affected SAP may be required."
    ::= { sapTraps 40 }

sapDcpStaticHoldDownStart        NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpStaticExcdCountHi,
        sapDcpFpStaticExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpStaticHoldDownStart notification is generated when a
         particular SAP starts hold-down period for an exceeding
         static-policer. This notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured
         to 'verbose'.

         [EFFECT] The static-policer will treat all packets as non-conformant
         during the hold-down period.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 41 }

sapDcpDynamicHoldDownStart       NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpDynExcdCountHi,
        sapDcpFpDynExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpDynamicHoldDownStart notification is generated when
         a particular SAP starts hold-down period for an exceeding protocol.
         This notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is
         configured to 'verbose'.

         [EFFECT] The protocol will treat all packets as non-conformant during
         the hold-down period.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 42 }

sapDcpStaticHoldDownEnd          NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpStaticExcdCountHi,
        sapDcpFpStaticExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpStaticHoldDownEnd notification is generated when a
         particular SAP completes hold-down period for an exceeding
         static-policer. This notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured
         to 'verbose'.

         [EFFECT] The static-policer for an affected SAP will transition to a
         detection-time countdown after the hold-down period is complete.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 43 }

sapDcpDynamicHoldDownEnd         NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpDynExcdCountHi,
        sapDcpFpDynExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE]  The sapDcpDynamicHoldDownEnd notification is generated
         when a particular SAP completes hold-down period for an exceeding
         protocol. This notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is configured
         to 'verbose'.

         [EFFECT] The protocol for an affected SAP will transition to a
         detection-time countdown after the hold-down period is complete.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 44 }

sapDcpStaticConform              NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpStaticExcdCountHi,
        sapDcpFpStaticExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpStaticConform notification is generated when the
         static-policer for a particular SAP has been detected as conformant
         for a period of the configured detection-time after having been
         previously detected as exceeding and completed any hold-down period.
         This notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured
         to 'enable' or 'verbose'.

         [EFFECT] The affected SAP is now in conformance with the parameters
         configured for the associated distributed CPU protection policy.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 45 }

sapDcpDynamicConform             NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpDynExcdCountHi,
        sapDcpFpDynExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpDynamicConform notification is generated when the
         protocol for a particular SAP has been detected as conformant for a
         period of the configured detection-time after having been previously
         detected as exceeding and completed any hold-down period. This
         notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtStaticPlcrLogEvent is configured
         to 'enable' or 'verbose'.

         [EFFECT] The affected SAP is now in conformance with the parameters
         configured for the associated distributed CPU protection policy.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 46 }

sapDcpLocMonExcd                 NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpLocMonExcdCountHi,
        sapDcpFpLocMonExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpLocMonExcd notification is generated when the
         local-monitoring-policer for a particular SAP has transitioned from a
         conformant state to a non-conformant state and the system will attempt
         to allocate dynamic enforcement policers. This notification is
         generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configured
         to 'verbose'.

         [EFFECT] The affected SAP may be using more resources than expected
         and cause the system to underperform. This notification may indicate a
         Denial of Service attack or a misconfiguration in the network.

         [RECOVERY] Appropriate configuration changes to the distributed CPU
         protection policy or to the affected SAP may be required."
    ::= { sapTraps 47 }

sapDcpLocMonExcdDynResource      NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpLocMonExcdCountHi,
        sapDcpFpLocMonExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpLocMonExcdDynResource notification is generated when
         the local-monitoring-policer for a particular SAP has transitioned
         from a conformant state to a non-conformant state and the system
         cannot allocate all the dynamic enforcements policers associated with
         the distributed CPU protection policy . This notification is generated
         when TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is
         configured to 'enable' or 'verbose'.

         [EFFECT] The affected SAP may be using more resources than expected
         and cause the system to underperform. This notification may indicate a
         Denial of Service attack or a misconfiguration in the network.

         [RECOVERY] Appropriate configuration changes to the distributed CPU
         protection policy or to the affected SAP or to the dynamic enforcement
         policer pool(TIMETRA-CHASSIS-MIB.mib::tmnxFPDCpuProtDynEnfrcPlcrPool)."
    ::= { sapTraps 48 }

sapDcpLocMonExcdAllDynAlloc      NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpLocMonExcdCountHi,
        sapDcpFpLocMonExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpLocMonExcdAllDynAlloc notification is generated when
         all dynamic enforcement policers associated with a non-conformant
         local-monitoring-policer have been successfully allocated for a
         particular SAP. This notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configure
         to 'verbose'.

         [EFFECT] The affected SAP may be using more resources than expected
         and cause the system to underperform.

         [RECOVERY] Appropriate configuration changes to the distributed CPU
         protection policy or to the affected SAP may be required."
    ::= { sapTraps 49 }

sapDcpLocMonExcdAllDynFreed      NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpLocMonState,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpLocMonExcdAllDynFreed notification is generated for
         a particular SAP when all the previously allocated dynamic enforcement
         policers for a particular local-monitoring-policer on the associated
         distributed CPU protection policy have been freed up and all the
         protocols are once again being monitored by local-monitor. This
         notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtLocMonPlcrLogEvent is configured
         to 'verbose'.

         [EFFECT] The affected SAP may be using more resources than expected
         and cause the system to underperform.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 50 }

sapDcpDynamicEnforceAlloc        NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpDynAllocated,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpDynamicEnforceAlloc notification is generated when a
         dynamic enforcement policer is allocated on a particular SAP. This
         notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is
         configured to 'verbose'.

         [EFFECT] The affected SAP is not in conformance with the configured
         parameters of the associated distributed CPU protection policy and may
         be using more resources than expected and cause the system to
         underperform.

         [RECOVERY] Appropriate configuration changes to the distributed CPU
         protection policy or to the affected SAP may be required."
    ::= { sapTraps 51 }

sapDcpDynamicEnforceFreed        NOTIFICATION-TYPE
    OBJECTS     {
        sapDcpFpDynExcdCountHi,
        sapDcpFpDynExcdCountLo,
        sapDCpuProtPolicy,
        sapDcpTimeEventOccured
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapDcpDynamicEnforceFreed notification is generated when a
         dynamic enforcement policer is freed on a particular SAP. This
         notification is generated when
         TIMETRA-SECURITY-MIB.mib::tmnxDCpuProtProtocolDynLogEvent is
         configured to 'verbose'.

         [EFFECT] The affected SAP is now in conformance with the configured
         parameters of the associated distributed CPU protection policy.

         [RECOVERY] There is no recovery required for this notification."
    ::= { sapTraps 52 }

sapTlsMacMoveExceedNonBlock      NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        svcTlsMacMoveMaxRate,
        sapTlsNotifyMacAddr
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapTlsMacMoveExceedNonBlock notification is generated when
         the SAP exceeds the TLS svcTlsMacMoveMaxRate when sapTlsLimitMacMove
         is set to 'nonBlocking'. In case of Provider Backbone Bridging (PBB),
         if the MAC address that exceeds the rate is ISID-VPLS(iVpls) FDB and
         sap binding that detects the move is in Backbone-VPLS(bVpls), the
         notification will be generated with svcId, custId of I-VPLS and B-VPLS
         sapId.

         [EFFECT] This notification is informational only.

         [RECOVERY] User can adjust the value of svcTlsMacMoveMaxRate to reduce
         the frequency of this notification."
    ::= { sapTraps 53 }

sapEthLoopbackStarted            NOTIFICATION-TYPE
    OBJECTS     {
        sapEthLoopbackMode,
        sapEthLoopbackMacSwap,
        sapEthLoopbackMacSwapAddr,
        sapEthLoopbackMacSwapAddrAll
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapEthLoopbackStarted notification is generated when the
         SAP is placed into loopback.

         [EFFECT] This notification is informational only."
    ::= { sapTraps 54 }

sapEthLoopbackStopped            NOTIFICATION-TYPE
    OBJECTS     {
        sapEthLoopbackMode
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapEthLoopbackStopped notification is generated when the
         SAP is removed from loopback.

         [EFFECT] This notification is informational only."
    ::= { sapTraps 55 }

sapTunnelEncapIpMtuTooSmall      NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTunnelNotifyName,
        sapTunnelNotifyConfigIpMtu,
        sapTunnelNotifyEncapOverhead,
        sapTunnelNotifyConfigEncapIpMtu
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapTunnelEncapIpMtuTooSmall notification is generated when
         the addition of tunnel encapsulation to a packet at or near the IP
         Tunnel's configured IP MTU may cause it to exceed the tunnel's
         configured encapsulated IP MTU.

         [EFFECT] The pre-encapsulated packet may be fragmented, and will
         require reassembly by the tunnel remote endpoint, causing a
         performance impact.

         [RECOVERY] Configured IP MTU and/or encapsulated IP MTU may need to be
         changed depending on the size of the encapsulation overhead as
         indicated in 'sapTunnelNotifyEncapOverhead', and the transmission
         capabilities of the tunnel's transport network."
    ::= { sapTraps 56 }

sapHostRipListenerSetupFailed    NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        svcVpnId,
        sapPortId,
        sapEncapValue,
        sapRipListenerHostIpAddr,
        sapRipListenerHostIpAddrType,
        sapRipListenerVRtrID,
        sapRipListenerNotifDescription
    }
    STATUS      current
    DESCRIPTION
        "The sapHostRipListenerSetupFailed notification is generated when the
         system was unable to set up a RIP listener for the given host.

         [CAUSE] <To be documented>

         [EFFECT] <To be documented>

         [RECOVERY] No recovery is required on this system."
    ::= { sapTraps 57 }

sapStatHost6DynMacConflict       NOTIFICATION-TYPE
    OBJECTS     {
        sapStatHost6DynMacAddress,
        sapNotifyReason
    }
    STATUS      current
    DESCRIPTION
        "The sapStatHost6DynMacConflict notification is generated when the
         system was unable to update the MAC address of a static IPv6 host.

         [CAUSE] The system failed to update the MAC address of a static IPv6
         host.

         [EFFECT] The static IPv6 host has a MAC address that is not up to
         date.

         [RECOVERY] The recovery action depends on the exact reason why the
          MAC update failed. This is clarified in the sapNotifyReason object."
    ::= { sapTraps 58 }

tmnxIpTunnelOperStateChange      NOTIFICATION-TYPE
    OBJECTS     {
        tmnxIpTunnelAdminState,
        tmnxIpTunnelOperState,
        tmnxIpTunnelOperFlags
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxIpTunnelOperStateChange notification is generated when
         there is a change in tmnxIpTunnelOperState for an IP tunnel.

         [EFFECT] When the tunnel is operationally down, traffic arriving at
         the tunnel endpoints will not be encapsulated and transported."
    ::= { sapTraps 59 }

svcEvpnMplsMacMoveExceedNonBlock NOTIFICATION-TYPE
    OBJECTS     {
        tlsFdbEvpnMplsTEPAddrType,
        tlsFdbEvpnMplsTEPAddr,
        tlsFdbEvpnMplsLabel,
        tlsFdbEvpnMplsEthSegId,
        tlsFdbBackboneDstMac,
        svcId,
        custId,
        svcTlsMacMoveMaxRate,
        sapTlsNotifyMacAddr
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The svcEvpnMplsMacMoveExceedNonBlock notification is generated
         when the EVPN MPLS destination exceeds the TLS svcTlsMacMoveMaxRate
         when sapTlsLimitMacMove is set to 'nonBlocking'.

         [EFFECT] This notification is informational only.

         [RECOVERY] User can adjust the value of svcTlsMacMoveMaxRate to reduce
         the frequency of this notification."
    ::= { sapTraps 60 }

sapIfIgnorePortStateStart        NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapNotifyIfName
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapIfIgnorePortStateStart notification is generated when
         system starts to ignore non-operational state of the port associated
         with the IP interface.

         [EFFECT] This notification is informational only.

         [RECOVERY] Set sapL3LoopbackRowStatus to 'destroy' to stop this."
    ::= { sapTraps 61 }

sapIfIgnorePortStateStop         NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapNotifyIfName
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapIfIgnorePortStateStop notification is generated when
         system stops to ignore non-operational state of the port associated
         with the IP interface.

         [EFFECT] This notification is informational only.

         [RECOVERY] None required."
    ::= { sapTraps 62 }

sapReceivedPbbProtSrcMac         NOTIFICATION-TYPE
    OBJECTS     {
        svcTlsBackboneVplsSvcId,
        sapPortId,
        sapEncapValue,
        protectedMacForNotify
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The sapReceivedPbbProtSrcMac notification is generated when a
         protected source MAC protected in i-vpls is received on SAP in b-vpls
         (svcTlsBackboneVplsSvcId) service.

         [EFFECT] The frame is discarded.

         [RECOVERY] None needed."
    ::= { sapTraps 63 }

sapMgNotification                OBJECT IDENTIFIER ::= { sapTrapsPrefix 1 }

topologyChangeSapState           NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The topologyChangeSapState notification is   generated
         when  a  SAP  has  transitioned  state  to blocking or
         broken  from a state other than forwarding. This event
         complements     what     is     not     covered     by
         topologyChangeSapMajorState.    The    spanning   tree
         topology  has  been modified and it may denote loss of
         customer  access or redundancy. Check the new topology
         against the provisioned topology to determine severity
         of connectivity loss."
    ::= { tstpTraps 5 }

receivedTCN                      NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue
    }
    STATUS      current
    DESCRIPTION
        "The receivedTCN notification is generated  when  a SAP
         has received TCN from another bridge. This bridge will
         either  have  its  configured  BPDU  with the topology
         change  flag  set  if  it is a root bridge, or it will
         pass  TCN  to  its root bridge. Eventually the address
         aging  timer  for the forwarding database will be made
         shorter  for  a  short  period of time. No recovery is
         needed."
    ::= { tstpTraps 6 }

higherPriorityBridge             NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxCustomerBridgeId,
        tmnxCustomerRootBridgeId
    }
    STATUS      current
    DESCRIPTION
        "The higherPriorityBridge notification is generated when
         a  customer's device has been configured with a bridge
         priority  equal  to  zero. The SAP that the customer's
         device  is  connected  through will be blocked. Remove
         the  customer's  device  or reconfigure the customer's
         bridge priority with a value greater than zero."
    ::= { tstpTraps 9 }

bridgedTLS                       NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue
    }
    STATUS      obsolete
    DESCRIPTION
        "The  bridgedTLS  notification  is  generated  when   a
         configuration  BPDU  has been received that identifies
         that  another TLS with a different VPNID is attempting
         to   bridge   with   this   TLS.   At  least  one  ESR
         participating  within  one  of the TLS that is locally
         connected must have an active VCP for this to be seen.
         The  SAP  that  the  configuration BPDU is received on
         will  be  blocked  to prevent the TLS to TLS bridging.
         Reconfigure  the  bridged  TLS  into  a  single TLS or
         remove the connectivity."
    ::= { tstpTraps 10 }

sapEncapPVST                     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxOtherBridgeId
    }
    STATUS      current
    DESCRIPTION
        "The sapEncapPVST  notification  is  generated when the
         SAP  receives  a BPDU that is PVST encapsulated, after
         having  received  BPDUs  that were 802.d encapsulated.
         The  SAP  BPDUs  will  also  be  PVST encapsulated. No
         recovery is needed."
    ::= { tstpTraps 11 }

sapEncapDot1d                    NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxOtherBridgeId
    }
    STATUS      current
    DESCRIPTION
        "The  sapEncapDot1d  notification is generated when the
         SAP  receives a BPDU that is 802.1d encapsulated after
         having received BPDUs that were PVST encapsulated. The
         SAP   BPDUs  will  also  be  802.1d  encapsulated.  No
         recovery is needed."
    ::= { tstpTraps 12 }

sapReceiveOwnBpdu                NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        tmnxOtherBridgeId
    }
    STATUS      obsolete
    DESCRIPTION
        "The sapReceiveOwnBpdu notification is generated when the SAP STP
         received it's own BPDU."
    ::= { tstpTraps 13 }

sapActiveProtocolChange          NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsStpOperProtocol
    }
    STATUS      current
    DESCRIPTION
        "The sapActiveProtocolChange notification is generated
         when  the  spanning  tree protocol on this SAP changes
         from  rstp  to  stp  or  vice  versa.  No  recovery is
         needed."
    ::= { tstpTraps 30 }

tmnxStpRootGuardViolation        NOTIFICATION-TYPE
    OBJECTS     {
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsStpRootGuardViolation
    }
    STATUS      current
    DESCRIPTION
        "The tmnxStpRootGuardViolation notification is generated when a SAP
         which has root-guard configured is trying to become root (has a better
         STP priority vector). The SAP will become alternate and traffic will
         be blocked."
    ::= { tstpTraps 35 }

tmnxSapStpExcepCondStateChng     NOTIFICATION-TYPE
    OBJECTS     {
        custId,
        svcId,
        sapPortId,
        sapEncapValue,
        sapTlsStpException
    }
    STATUS      current
    DESCRIPTION
        "The tmnxSapStpExcepCondStateChng notification is generated when the
         value of the object sapTlsStpException has changed, i.e. when the
         exception condition changes on the indicated SAP."
    ::= { tstpTraps 37 }

END