path: root/MIBS/nokia/ALCATEL-IND1-VRRP-MIB

ALCATEL-IND1-VRRP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32
		FROM SNMPv2-SMI
	RowStatus, TruthValue, TEXTUAL-CONVENTION
		FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF
	softentIND1Vrrp
		FROM ALCATEL-IND1-BASE
	ifIndex, InterfaceIndexOrZero
		FROM IF-MIB
        InetAddressType, InetAddress
                FROM INET-ADDRESS-MIB
	vrrpOperVrId, vrrpOperEntry
		FROM VRRP-MIB
	alaVrrp3OperVrId, alaVrrp3OperIpVersion, alaVrrp3OperEntry
		FROM ALCATEL-IND1-VRRP3-MIB;


alcatelIND1VRRPMIB MODULE-IDENTITY
    LAST-UPDATED "200704030000Z"
    ORGANIZATION "Alcatel-Lucent"
    CONTACT-INFO
        "Please consult with Customer Service to ensure the most appropriate
         version of this document is used with the products in question:

                    Alcatel-Lucent, Enterprise Solutions Division
                   (Formerly Alcatel Internetworking, Incorporated)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America

        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507

        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):

             Propietary VRRP MIB definitions

         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.

         No liability shall be assumed for any incidental, indirect, special,
	 or consequential damages whatsoever arising from or related to this
         document or the information contained herein.

         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.

                     Copyright (C) 1995-2007 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200704030000Z"
    DESCRIPTION
        "The latest version of this MIB Module."

    ::= { softentIND1Vrrp 1 }


alcatelIND1VRRPMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIB 1 }

-- *******************************************************************
--  Textual Conventions
-- *******************************************************************

 AlaVrTrackId ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION
	"A number that serves to uniquely identify a tracking policy."
     SYNTAX      Integer32 (1..255)

AlaVrGroupId ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION
	"A number that serves to uniquely identify a virtual router group."
     SYNTAX      Integer32 (1..255)

--
-- Alcatel VRRP Configuration
--

alaVRRPConfig OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 1 }
alaVrrpTracking OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 2 }
alaVrrpOperations OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 3 }
alaVRRPv2Config OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 4 }
alaVrrpGroup OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBObjects 5 }

alaVRRPStartDelay OBJECT-TYPE
    SYNTAX	Integer32 (0..180)
    UNITS       "seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Once VRRP's initial configuration is complete at startup, this
	object specifies the number of seconds VRRP will delay before
	leaving the initialize state.  This delay is to allow external
	protocols (spanning tree, OSPF, etc.) time to converge so that
	when a VRRP virtual router becomes master it will be able to
	forward traffic."
    DEFVAL	{ 30 }
    ::= { alaVRRPConfig 1 }

 alaVrrpBfdStatus  OBJECT-TYPE
	SYNTAX		INTEGER
				{
				enable(1),
				disable(2)
				}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"Enable or disable the BFD for VRRP."
	::= { alaVRRPConfig 2}


alaVRRPDefaultInterval OBJECT-TYPE
     SYNTAX       Integer32 (1..255)
     UNITS        "seconds"
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "The VRRP Router default time interval, in seconds, between 
         sending advertisement messages."
     DEFVAL       { 1 }
     ::= { alaVRRPv2Config 1 }

alaVRRPDefaultPriority OBJECT-TYPE
     SYNTAX       Integer32 (1..254)
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object specifies the VRRP Router default priority to be used for the
         virtual router master election process. Higher values imply
         higher priority."
     DEFVAL       { 100 }
     ::= { alaVRRPv2Config 2 }

alaVRRPDefaultPreemptMode OBJECT-TYPE
     SYNTAX       TruthValue
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "The VRRP Router default preempt mode. Controls whether a higher 
          priority virtual router will preempt a lower priority master."
     DEFVAL       { true }
     ::= { alaVRRPv2Config 3 }

alaVRRPAdminState OBJECT-TYPE
     SYNTAX       INTEGER {
         allEnable(1),
         enable(2),
         disable(3)
     }
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object is used to force a change in to the vrrpOperAdminState
         of virtual routers in the vrrpOperTable.  Setting a value of allEnable will
         cause the vrrpOperAdminState of each entry in the table to be set to up.
         Setting a value of enable will set the vrrpOperAdminState to up but
         only for the set of virtual routers whose vrrpOperAdminState was down 
         by default (as occurs when the virtual router instance is created) or due 
         to a previous set command of the alaVRRPAdminState to disable.
         Setting a value of disable will cause the vrrpOperAdminState of each 
         entry in the table to be set to down.

         This object is of little value when read but will return the last value
         to which it was set."
     ::= { alaVRRPv2Config 4 }

alaVRRPSetParam OBJECT-TYPE
     SYNTAX       INTEGER {
         none(1),
         all(2),
         interval(3),
         priority(4),
         preempt(5)
     }
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object is used to force the virtual routers in the vrrpOperTable
         to revert to the default parameter values specified in 
         alaVRRPDefaultInterval,  alaVRRPDefaultPriority, and 
         alaVRRPDefaultPreemptMode.  Unless alaVRRPOverride is set to true only
         virtual routers previously configured with default parameter values 
         are modified.  Parameters can be modified individually with the 
         interval, priority, and preempt values, or collectively with the all 
         value.  

         This object is of little value when read but will return the last value
         to which it was set."
     ::= { alaVRRPv2Config 5 }

alaVRRPOverride OBJECT-TYPE
     SYNTAX       TruthValue
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object is used in combination with the alaVRRPSetParam object 
         to force all virtual routers in the vrrpOperTable to revert to the default 
         values specified in alaVRRPDefaultInterval,  alaVRRPDefaultPriority,
         and alaVRRPDefaultPreemptMode.

         This object is of little value when read but will return the last value
         to which it was set."
     ::= { alaVRRPv2Config 6 }

-- *******************************************************************
--  Start of  VRRP Tracking MIB objects
-- *******************************************************************

-- *******************************************************************
--  VRRP Tracking Policy Table
-- *******************************************************************

 alaVrrpTrackTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrpTrackEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"VRRP Tracking Policy table, which consists of a sequence
	(i.e., one or more conceptual rows) of 'vrrpTrackEntry' items."
     ::= { alaVrrpTracking 1 }

 alaVrrpTrackEntry OBJECT-TYPE
     SYNTAX       AlaVrrpTrackEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "An entry in the vrrpTrackTable containing the operational
          characteristics of a VRRP tracking policy.

          Rows in the table cannot be modified unless the value
          of `vrrpTrackAdminState' is `disabled'."

     INDEX    { alaVrrpTrackId }
     ::= { alaVrrpTrackTable 1 }

 AlaVrrpTrackEntry ::=
     SEQUENCE {
         alaVrrpTrackId
             AlaVrTrackId,
         alaVrrpTrackState
             INTEGER,
         alaVrrpTrackAdminState
             INTEGER,
         alaVrrpTrackEntityType
             INTEGER,
         alaVrrpTrackEntityVlan
             INTEGER,
         alaVrrpTrackEntityPort
             InterfaceIndexOrZero,
         alaVrrpTrackEntityIpAddress
             IpAddress,
         alaVrrpTrackPriority
             Integer32,
         alaVrrpTrackRowStatus
             RowStatus,
         alaVrrpTrackEntityInterface
             InterfaceIndexOrZero,
         alaVrrpTrackEntityIpv6Interface
             InterfaceIndexOrZero,
         alaVrrpTrackEntityIpAddrType
             InetAddressType,
         alaVrrpTrackEntityIpAddr
             InetAddress,
		 alaVrrpTrackBfdStatus
			 INTEGER			 
 }

 alaVrrpTrackId OBJECT-TYPE
     SYNTAX       AlaVrTrackId
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Identifier (TRACKID)."
     ::= { alaVrrpTrackEntry 1 }

alaVrrpTrackState OBJECT-TYPE
     SYNTAX       INTEGER {
         up(1),
         down(2)
     }
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "The conditional state of the tracking policy entity."
     ::= { alaVrrpTrackEntry 2 }

 alaVrrpTrackAdminState OBJECT-TYPE
     SYNTAX       INTEGER {
         enable(1),
         disable(2)
     }
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object will enable/disable the tracking policy function."
     DEFVAL    { enable }
     ::= { alaVrrpTrackEntry 3 }

alaVrrpTrackEntityType OBJECT-TYPE
     SYNTAX       INTEGER {
         vlan(1),
         port(2),
         ipaddress(3),
         interface(4),
         ipv6Interface(5)
     }
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "This object specifies the tracking policy entity type 
          currently in use."
     ::= { alaVrrpTrackEntry 4 }

alaVrrpTrackEntityVlan OBJECT-TYPE
     SYNTAX       INTEGER (0..4094)
     MAX-ACCESS   read-write
     STATUS       deprecated
     DESCRIPTION
         "This object contains the Tracking Policy Entity. A vlan id. 

         The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort,
         alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, 
         alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
         are mutually exclusive of one another. The last one set is the 
         valid one and identifies the entity type."
     ::= { alaVrrpTrackEntry 5 }

alaVrrpTrackEntityPort OBJECT-TYPE
     SYNTAX       InterfaceIndexOrZero
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Entity. A port 
         ifIndex or 0 if not significant.  

         The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort,
         alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, 
         alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
         are mutually exclusive of one another. The last one set is the 
         valid one and identifies the entity type."
     ::= { alaVrrpTrackEntry 6 }

alaVrrpTrackEntityIpAddress OBJECT-TYPE
     SYNTAX       IpAddress
     MAX-ACCESS   read-write
     STATUS       deprecated
     DESCRIPTION
         "This object contains the Tracking Policy Entity. IP Address.

         The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort,
         alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, 
         alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
         are mutually exclusive of one another. The last one set is the 
         valid one and identifies the entity type."
     ::= { alaVrrpTrackEntry 7 }

alaVrrpTrackPriority OBJECT-TYPE
     SYNTAX       Integer32 (1..255)
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
	"This object specifies the value by which the priority of virtual
	routers associated with the tracking policy will be decremented
	when the tracked entity's operational state transitions from up to
	down, or will be incremented when the tracked entity's operational
	state transitions from down to up."
     DEFVAL       { 25 }
     ::= { alaVrrpTrackEntry 8 }

alaVrrpTrackRowStatus OBJECT-TYPE
     SYNTAX       RowStatus
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
	 "The row status variable, used in accordance to installation
         and removal conventions for conceptual rows.

         To create a row in this table, a manager sets this object
         to either createAndGo(4) or createAndWait(5). Until instances
         of all corresponding columns are appropriately configured,
         the value of the corresponding instance of the
         `vrrpTrackRowStatus' column will be read as notReady(3).

         In particular, a newly created row cannot be made active(1)
         until (minimally) the corresponding instances of `vrrpTrackId',
         and either one of : alaVrrpTrackEntityVlan, 
         alaVrrpTrackEntityPort, alaVrrpTrackEntityIpAddress, or 
         alaVrrpTrackEntityInterface have been set."
     ::= { alaVrrpTrackEntry 9 }

alaVrrpTrackEntityInterface OBJECT-TYPE
     SYNTAX       InterfaceIndexOrZero
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Entity. An interface. 

         The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort,
         alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, 
         alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
         are mutually exclusive of one another. The last one set is the 
         valid one and identifies the entity type."
     ::= { alaVrrpTrackEntry 10 }


alaVrrpTrackEntityIpv6Interface OBJECT-TYPE
     SYNTAX       InterfaceIndexOrZero
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Entity. An Ipv6 
         interface. 

         The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort,
         alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, 
         alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
         are mutually exclusive of one another. The last one set is the 
         valid one and identifies the entity type."
     ::= { alaVrrpTrackEntry 11 }


alaVrrpTrackEntityIpAddrType OBJECT-TYPE
     SYNTAX       InetAddressType
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Entity IP Address
         type."
     ::= { alaVrrpTrackEntry 12 }

alaVrrpTrackEntityIpAddr OBJECT-TYPE
     SYNTAX       InetAddress
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Entity. An 
         IPv4 for or IPv6 Address based on alaVrrpTrackEntityIpAddrType.

         The alaVrrpTrackEntityVlan, alaVrrpTrackEntityPort,
         alaVrrpTrackEntityIpAddress, alaVrrpTrackEntityInterface, 
         alaVrrpTrackEntityIpv6Interface, and alaVrrpTrackEntityIpAddr
         are mutually exclusive of one another. The last one set is the 
         valid one and identifies the entity type."
     ::= { alaVrrpTrackEntry 13 }

 alaVrrpTrackBfdStatus 	OBJECT-TYPE	
	SYNTAX		INTEGER
	MAX-ACCESS   read-write
	STATUS       current
	DESCRIPTION
		"Enables BFD for a VRRP track."
	::= { alaVrrpTrackEntry 14}

-- *******************************************************************
--  VRRP Associated Tracking Policy Table
-- *******************************************************************

 alaVrrpAssoTrackTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrpAssoTrackEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"The table of tracking policies associated with this virtual router."
     ::= { alaVrrpTracking 2 }

 alaVrrpAssoTrackEntry OBJECT-TYPE
     SYNTAX       AlaVrrpAssoTrackEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"An entry in the table contains a tracking policy id that is
	associated with a virtual router. The number of rows for
	a given ifIndex and VrId will equal the number of tracking
	policies associated with the virtual router (equivalent to alaVrrpTrackCount').
	Rows in the table cannot be modified unless the value of
	`vrrpOperAdminState' is `disabled' and the 'vrrpOperState' has transitioned to `initialize'."
     INDEX    { ifIndex, vrrpOperVrId, alaVrrpAssoTrackId }
     ::= { alaVrrpAssoTrackTable 1 }

 AlaVrrpAssoTrackEntry ::=
     SEQUENCE {
         alaVrrpAssoTrackId
             AlaVrTrackId,
         alaVrrpAssoTrackRowStatus
             RowStatus
 }

 alaVrrpAssoTrackId OBJECT-TYPE
     SYNTAX       AlaVrTrackId
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "The identifier of the tracking policy the virtual router is
         responsible for monitoring."
     ::= { alaVrrpAssoTrackEntry 1 }

 alaVrrpAssoTrackRowStatus OBJECT-TYPE
     SYNTAX       RowStatus
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "The row status variable, used according to installation
         and removal conventions for conceptual rows. Setting this
         object to active(1) or createAndGo(4) results in the
         addition of an associated tracking policy for a virtual router.
         Destroying the entry or setting it to notInService(2)
         removes the associated tracking policy from the virtual router.
         The use of other values is implementation-dependent."
     ::= { alaVrrpAssoTrackEntry 2 }

-- *******************************************************************
--  VRRP Group Table
-- *******************************************************************

 alaVrrpGroupTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrpGroupEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"VRRP Group table, which consists of a sequence (i.e., one 
            or more conceptual rows) of 'vrrpGroupEntry' items."
     ::= { alaVrrpGroup 1 }

 alaVrrpGroupEntry OBJECT-TYPE
     SYNTAX       AlaVrrpGroupEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "An entry in the vrrpGroupTable containing the 
          characteristics of a VRRP group."
     INDEX    { alaVrrpGroupId }
     ::= { alaVrrpGroupTable 1 }

 AlaVrrpGroupEntry ::=
     SEQUENCE {
         alaVrrpGroupId
             AlaVrGroupId,
         alaVrrpGroupInterval
             Integer32,
         alaVrrpGroupPriority
             Integer32,
         alaVrrpGroupPreemptMode
             TruthValue,
         alaVrrpGroupAdminState
             INTEGER,
         alaVrrpGroupSetParam
             INTEGER,
         alaVrrpGroupOverride
             TruthValue,
         alaVrrpGroupRowStatus
             RowStatus
}

 alaVrrpGroupId OBJECT-TYPE
     SYNTAX       AlaVrGroupId
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "This object contains the Tracking Policy Identifier (GROUPID)."
     ::= { alaVrrpGroupEntry 1 }

alaVrrpGroupInterval OBJECT-TYPE
     SYNTAX       Integer32 (1..255)
     UNITS        "seconds"
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "The VRRP Group time interval, in seconds, between 
         sending advertisement messages."
     DEFVAL       { 1 }
     ::= { alaVrrpGroupEntry 2 }

alaVrrpGroupPriority OBJECT-TYPE
     SYNTAX       Integer32 (1..254)
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "This object specifies the VRRP Group priority to be used for the
         virtual router master election process. Higher values imply
         higher priority."
     DEFVAL       { 100 }
     ::= { alaVrrpGroupEntry 3 }

alaVrrpGroupPreemptMode OBJECT-TYPE
     SYNTAX       TruthValue
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "The VRRP Group preempt mode. Controls whether a higher 
          priority virtual router will preempt a lower priority master."
     DEFVAL       { true }
     ::= { alaVrrpGroupEntry 4 }

alaVrrpGroupAdminState OBJECT-TYPE
     SYNTAX       INTEGER {
         allEnable(1),
         enable(2),
         disable(3)
     }
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "This object is used to force a change in to the vrrpOperAdminState
         of virtual routers in the corresponding alaVRRPAssoGroupTable
         entry.  Setting a value of allEnable will cause the vrrpOperAdminState
         of each vrrpOperEntry to be set to up.  Setting a value of enable will
         set the vrrpOperAdminState to up but only for the set of virtual routers
         in the group whose vrrpOperAdminState was down by default (as 
         occurs when the virtual router instance is created) or due to a previous
         set command of the alaVrrpGroupAdminState or alaVRRPAdminState
         to disable.  Setting a value of disable will cause the vrrpOperAdminState
        of each entry in the table to be set to down.

         This object is of little value when read but will return the last value
         to which it was set."
     ::= { alaVrrpGroupEntry 5 }

alaVrrpGroupSetParam OBJECT-TYPE
     SYNTAX       INTEGER {
         none(1),
         all(2),
         interval(3),
         priority(4),
         preempt(5)
     }
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "This object is used to force the virtual routers in the corresponding
         alaVRRPAssoGroupTable to revert to the group parameter values 
         specified in alaVrrpGroupInterval,  alaVrrpGroupPriority,
         and alaVrrpGroupPreemptMode.  Unless alaVrrpGroupOverride is set to
         true only virtual routers previously configured with default 
         or group parameter values are modified.  Parameters can be modified 
         individually with the interval, priority, and preempt values, or 
         collectively with the all value.  

         This object is of little value when read but will return the last value
         to which it was set."
     ::= { alaVrrpGroupEntry 6 }

alaVrrpGroupOverride OBJECT-TYPE
     SYNTAX       TruthValue
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "This object is used in combination with the alaVrrpGroupSetParam object 
         to force all virtual routers in the corresponding alaVrrpAssoGroupTable
         to revert to the group parameter values specified in alaVrrpGroupInterval,
         alaVrrpGroupPriority, and alaVrrpGroupPreemptMode.

         This object is of little value when read but will return the last value
         to which it was set."
     ::= { alaVrrpGroupEntry 7 }

alaVrrpGroupRowStatus OBJECT-TYPE
     SYNTAX       RowStatus
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
        "The row status variable, used in accordance to installation
         and removal conventions for conceptual rows.

         To create a row in this table, a manager sets this object
         to either createAndGo(4) or createAndWait(5). Until instances
         of all corresponding columns are appropriately configured,
         the value of the corresponding instance of the
         `alaVrrpGroupRowStatus' column will be read as notReady(3).

         In particular, a newly created row cannot be made active(1)
         until (minimally) the corresponding instance of `alaVrrpGroupId'
         has been set."
     ::= { alaVrrpGroupEntry 8 }

-- *******************************************************************
--  VRRP Associated Group Table
-- *******************************************************************

 alaVrrpAssoGroupTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrpAssoGroupEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"The table of virtual routers associated with this group."
     ::= { alaVrrpGroup 2 }

 alaVrrpAssoGroupEntry OBJECT-TYPE
     SYNTAX       AlaVrrpAssoGroupEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"An entry in the table contains a virtual router id that is
	associated with a virtual router group."
     INDEX    { alaVrrpGroupId, ifIndex, vrrpOperVrId }
     ::= { alaVrrpAssoGroupTable 1 }

 AlaVrrpAssoGroupEntry ::=
     SEQUENCE {
         alaVrrpAssoGroupRowStatus
             RowStatus
 }

 alaVrrpAssoGroupRowStatus OBJECT-TYPE
     SYNTAX       RowStatus
     MAX-ACCESS   read-create
     STATUS       current
     DESCRIPTION
         "The row status variable, used according to installation
         and removal conventions for conceptual rows. Setting this
         object to active(1) or createAndGo(4) results in the
         addition of an associated virtual router for a group.
         Destroying the entry or setting it to notInService(2)
         removes the associated virtual router from the group.
         The use of other values is implementation-dependent."
     ::= { alaVrrpAssoGroupEntry 1 }

-- ****************************************************************
-- Extention of the Vrrp Oper Table from the standard mib
-- ****************************************************************
 alaVrrpOperTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrpOperEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "Table of virtual router configuration info."
     ::= { alaVrrpOperations 1 }

 alaVrrpOperEntry OBJECT-TYPE
     SYNTAX       AlaVrrpOperEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "An entry in the table, config information
         about a given virtual router."
     AUGMENTS    { vrrpOperEntry }
     ::= { alaVrrpOperTable 1 }

 AlaVrrpOperEntry ::=
     SEQUENCE {
         alaVrrpCurrentPriority
             Integer32,
         alaVrrpTrackCount
             Integer32,
         alaVrrpGroupIdent
             Integer32
         }

 alaVrrpCurrentPriority OBJECT-TYPE
     SYNTAX       Integer32 (0..255)
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "This object specifies the priority currently used for the
         virtual router master election process. Higher values imply
         higher priority.

         A priority of '0', although not settable, is sent by
         the master router to indicate that this router has ceased
         to participate in VRRP and a backup virtual router should
         transition  to become a new master.

         A priority of 255 is used for the router that owns the
         associated IP address(es)."
     ::= { alaVrrpOperEntry 1 }

 alaVrrpTrackCount OBJECT-TYPE
     SYNTAX       Integer32
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "The number of tracking policies associated with a virtual router."
     ::= { alaVrrpOperEntry 2 }

 alaVrrpGroupIdent OBJECT-TYPE
     SYNTAX       Integer32 (0..255)
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "The VRRP group to which this virtual router belongs.  A value of
          zero indicates that the virtual router is not affiliated with any group."
     ::= { alaVrrpOperEntry 3 }

-- *******************************************************************
--  VRRP3 Associated Tracking Policy Table
-- *******************************************************************

 alaVrrp3AssoTrackTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrp3AssoTrackEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"The table of tracking policies associated with this virtual router."
     ::= { alaVrrpTracking 3 }

 alaVrrp3AssoTrackEntry OBJECT-TYPE
     SYNTAX       AlaVrrp3AssoTrackEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
	"An entry in the table contains a tracking policy id that is
	associated with a virtual router. The number of rows for
	a given IP Version, VrId, and ifIndex will equal the number of tracking
	policies associated with the virtual router (equivalent to alaVrrp3TrackCount').
	Rows in the table cannot be modified unless the value of
	`alaVrrp3OperAdminState' is `disabled' and the 'alaVrrp3OperState' has transitioned to `initialize'."
     INDEX    { alaVrrp3OperIpVersion, alaVrrp3OperVrId, ifIndex, alaVrrp3AssoTrackId }
     ::= { alaVrrp3AssoTrackTable 1 }

 AlaVrrp3AssoTrackEntry ::=
     SEQUENCE {
         alaVrrp3AssoTrackId
             AlaVrTrackId,
         alaVrrp3AssoTrackRowStatus
             RowStatus
 }

 alaVrrp3AssoTrackId OBJECT-TYPE
     SYNTAX       AlaVrTrackId
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "The identifier of the tracking policy the virtual router is
         responsible for monitoring."
     ::= { alaVrrp3AssoTrackEntry 1 }

 alaVrrp3AssoTrackRowStatus OBJECT-TYPE
     SYNTAX       RowStatus
     MAX-ACCESS   read-write
     STATUS       current
     DESCRIPTION
         "The row status variable, used according to installation
         and removal conventions for conceptual rows. Setting this
         object to active(1) or createAndGo(4) results in the
         addition of an associated tracking policy for a virtual router.
         Destroying the entry or setting it to notInService(2)
         removes the associated tracking policy from the virtual router.
         The use of other values is implementation-dependent."
     ::= { alaVrrp3AssoTrackEntry 2 }

-- ****************************************************************
-- Extention of the alaVrrp3OperTable from the Alcatel VRRP3 mib
-- ****************************************************************
 alaVrrp3OperExTable OBJECT-TYPE
     SYNTAX       SEQUENCE OF AlaVrrp3OperExEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "Table of virtual router configuration info."
     ::= { alaVrrpOperations 2 }

 alaVrrp3OperExEntry OBJECT-TYPE
     SYNTAX       AlaVrrp3OperExEntry
     MAX-ACCESS   not-accessible
     STATUS       current
     DESCRIPTION
         "An entry in the table, config information
         about a given virtual router."
     AUGMENTS    { alaVrrp3OperEntry }
     ::= { alaVrrp3OperExTable 1 }

 AlaVrrp3OperExEntry ::=
     SEQUENCE {
         alaVrrp3CurrentPriority
             Integer32,
         alaVrrp3TrackCount
             Integer32,
         alaVrrp3GroupIdent
             Integer32
         }

 alaVrrp3CurrentPriority OBJECT-TYPE
     SYNTAX       Integer32 (0..255)
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "This object specifies the priority currently used for the
         virtual router master election process. Higher values imply
         higher priority.

         A priority of '0', although not settable, is sent by
         the master router to indicate that this router has ceased
         to participate in VRRP and a backup virtual router should
         transition  to become a new master.

         A priority of 255 is used for the router that owns the
         associated IP address(es)."
     ::= { alaVrrp3OperExEntry 1 }

 alaVrrp3TrackCount OBJECT-TYPE
     SYNTAX       Integer32
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "The number of tracking policies associated with a virtual router."
     ::= { alaVrrp3OperExEntry 2 }

 alaVrrp3GroupIdent OBJECT-TYPE
     SYNTAX       Integer32 (0..255)
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "The VRRP group to which this virtual router belongs.  A value of
          zero indicates that the virtual router is not affiliated with any group."
     ::= { alaVrrp3OperExEntry 3 }

--
-- conformance information
--

alcatelIND1VRRPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIB 2 }
alcatelIND1VRRPMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBConformance 1 }
alcatelIND1VRRPMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1VRRPMIBConformance 2 }

alaVRRPCompliance MODULE-COMPLIANCE
    STATUS     current
    DESCRIPTION
	"The compliance statement for switches with Alcatel VRRP and
	implementing ALCATEL-IND1-VRRP-MIB."
    MODULE
    MANDATORY-GROUPS { alaVRRPConfigGroup }
    ::= { alcatelIND1VRRPMIBCompliances 1 }


--
-- units of conformance
--

alaVRRPConfigGroup OBJECT-GROUP
    OBJECTS  	{
                  alaVRRPStartDelay,
 		  alaVrrpBfdStatus 
		}
    STATUS     current
    DESCRIPTION
	"A collection of objects to support management of Alcatel VRRP."
    ::= { alcatelIND1VRRPMIBGroups 1 }

END