path: root/MIBS/nokia/ALCATEL-IND1-SYSTEM-MIB

ALCATEL-IND1-SYSTEM-MIB DEFINITIONS ::= BEGIN

		IMPORTS
		MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress,
		Unsigned32
			FROM SNMPv2-SMI
		MODULE-COMPLIANCE, OBJECT-GROUP
			FROM SNMPv2-CONF
		DisplayString, TEXTUAL-CONVENTION, TruthValue, RowStatus
			FROM SNMPv2-TC
		Ipv6Address
			FROM IPV6-TC
		hardentIND1System
			FROM ALCATEL-IND1-BASE;

	alcatelIND1SystemMIB MODULE-IDENTITY
		LAST-UPDATED "200709040000Z"
		ORGANIZATION "Alcatel-Lucent"
		CONTACT-INFO
		     "Please consult with Customer Service to ensure the most appropriate
             version of this document is used with the products in question:

                        Alcatel-Lucent, Enterprise Solutions Division
                       (Formerly Alcatel Internetworking, Incorporated)
                               26801 West Agoura Road

            Telephone:               North America  +1 800 995 2696
                                     Latin America  +1 877 919 9526
                                     Europe         +31 23 556 0100
                                     Asia           +65 394 7933
                                     All Other      +1 818 878 4507

            Electronic Mail:         support@ind.alcatel.com
            World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
            File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"


		DESCRIPTION
            "This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):

                 For the Birds Of Prey Product Line
                 Proprietary System Subsystem.


             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.

                         Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"

        REVISION      "200706180000Z"
        DESCRIPTION
            "The latest version of this MIB Module."

            ::= {hardentIND1System 1 }

    alcatelIND1SystemMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For BOP Proprietary System
            Subsystem Managed Objects."
        ::= { alcatelIND1SystemMIB 1 }

    alcatelIND1SystemMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Alcatel IND BOP Proprietary System
            Subsystem Conformance Information."
        ::= { alcatelIND1SystemMIB 2 }


    alcatelIND1SystemMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Alcatel IND BOP Proprietary System
            Subsystem Units Of Conformance."
        ::= { alcatelIND1SystemMIBConformance 1 }

    alcatelIND1SystemMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Alcatel IND BOP Proprietary System
            Subsystem Compliance Statements."
        ::= { alcatelIND1SystemMIBConformance 2 }

	-- textual conventions

	SystemFileType ::= TEXTUAL-CONVENTION
		STATUS		current
		DESCRIPTION
			"a small positive integer used to identify file types"
		SYNTAX	INTEGER	{
							file(1),
							directory(2),
							undefined(3),
							tarArchive(4)
						}

	SwitchLoggingIndex ::= TEXTUAL-CONVENTION
		STATUS		current
		DESCRIPTION
		"a small positive integer used to identify switch logging outputs"
		SYNTAX INTEGER	{	console(1),
							flash(2),
							socket(3),
							ipaddr(4)
						}

	MicrocodeDirectoryIndex ::= TEXTUAL-CONVENTION
		STATUS		current
		DESCRIPTION
			"a small positive integer used to index into the Microcode table"
		SYNTAX	INTEGER	{
							loaded(1),		-- the loaded directory
							certified(2),	-- the certified directory
							working(3),		-- the working directory
							issu(4)		    -- the in-service software update directory
						}

	AppIdIndex ::= TEXTUAL-CONVENTION
		STATUS		current
		DESCRIPTION
			"a small positive integer used to index into tables arranged
			by Application ID's."
		SYNTAX	INTEGER (0..254)	-- 255 possible application id's


	Enable ::= TEXTUAL-CONVENTION
		STATUS		current
		DESCRIPTION
			"an enumerated value used to indicate whether an entity is
			enabled(1), or disabled(2)"
		SYNTAX	INTEGER	{
							enabled(1),
							disabled(2)
						}


	FileSystemIndex ::= TEXTUAL-CONVENTION
   		STATUS       current
		DESCRIPTION
			"an enumerated value which provides an indication of the
			file system.  The value is a small positive integer indicating
			the type of the file system"
		SYNTAX	INTEGER {
					flash(1),	-- /flash
					uflash(2)	-- /uflash (USB Flash drive)
						}

	SeverityLevel ::= TEXTUAL-CONVENTION
   		STATUS       current
		DESCRIPTION
			"an enumerated value which provides an indication of the
			severity level used for logging and debug purposes.  The value is
			a small integer."
		SYNTAX	INTEGER
				{
					severityLevelOff (1), -- logging turned off
					severityLevelAlarm(2), -- about to crash and reboot
					severityLevelError(3), -- functionality is reduced
					severityLevelAlert(4), -- a violation has occurred
					severityLevelWarn (5), -- unexpected, non critical event
					severityLevelInfo (6), -- any other msg that is not a dbg msg
					severityLevelDbg1 (7), -- normal event debug message
					severityLevelDbg2 (8), -- debug specific message
					severityLevelDbg3 (9)  -- maximum verbosity dbg specific msg
				}

	SysLogFacilityId ::= TEXTUAL-CONVENTION
   		STATUS       current
		DESCRIPTION
	           ""

		SYNTAX		INTEGER
				{ 
					uucp(0),
					user(1),
					system(2),
					syslog(3),
					secAuth2(4),
					secAuth1(5),
					ntp(6),
					netNews(7),
					mail(8),
					lptr(9),
					logAudit(10),
					logAlert(11),
					local7(12),
					local6(13),
					local5(14),
					local4(15),
					local3(16),
					local2(17),
					local1(18),
					local0(19),
					kernel(20),
					ftp(21),
					clock2(22),
					clock1(23)
				} 

	CommandPercentComplete ::= TEXTUAL-CONVENTION
		STATUS	current
		DESCRIPTION 
			"An indication of percent complete for a command."
		SYNTAX	INTEGER (0..100)


    --  groups within the system mib
	systemMicrocode		OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 1 }
	systemBootParams	OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 2 }
	systemHardware		OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 3 }
	systemFileSystem	OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 4 }
	systemServices		OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 5 }
	systemSwitchLogging	OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 6 }
	systemDNS		OBJECT IDENTIFIER	::= {alcatelIND1SystemMIBObjects 7 }

	-- systemMicrocode group.  This group contains the CMM specific
	-- microcode information.

	systemMicrocodeTable	OBJECT-TYPE
		SYNTAX		SEQUENCE OF SystemMicrocodeEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
			"This table contains one row per set of microcode objects.
			There is always at least one set of microcode objects for each
			CMM System Module"
		::= {systemMicrocode 1}

    systemMicrocodeEntry	OBJECT-TYPE
        SYNTAX		SystemMicrocodeEntry
        MAX-ACCESS	not-accessible
        STATUS	    current
        DESCRIPTION
        	"The Microcode information for this CMM"
        INDEX	{systemMicrocodeIndex}
        ::= {systemMicrocodeTable 1}

	SystemMicrocodeEntry ::= SEQUENCE 	{
			systemMicrocodeIndex	MicrocodeDirectoryIndex -- top level
		}


    systemMicrocodeIndex	OBJECT-TYPE
        SYNTAX		MicrocodeDirectoryIndex
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
		"The index to the highest level of the microcode table.  This
		level is organized by the directory being referenced."
		::={ systemMicrocodeEntry 1 }

	systemMicrocodePackageTable	OBJECT-TYPE
		SYNTAX	SEQUENCE OF	SystemMicrocodePackageEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"the microcode package table"
		::= {systemMicrocode 2}

	systemMicrocodePackageEntry	OBJECT-TYPE
		SYNTAX	SystemMicrocodePackageEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"a row in the microcode package table"
		INDEX	{systemMicrocodeIndex, systemMicrocodePackageIndex}
		::= {systemMicrocodePackageTable 1}

	SystemMicrocodePackageEntry	::= SEQUENCE {
			systemMicrocodePackageIndex			Unsigned32,
			systemMicrocodePackageVersion		DisplayString,
			systemMicrocodePackageName			DisplayString,
			systemMicrocodePackageDescription	DisplayString,
			systemMicrocodePackageStatus		INTEGER,
			systemMicrocodePackageSize			Unsigned32
		}

	systemMicrocodePackageIndex	OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The index to the package sub table in the microcode table"
		::= {systemMicrocodePackageEntry 1}

	systemMicrocodePackageVersion OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The version of the microcode package (Fos.img, Fbase.img, etc.)"
		::=	{systemMicrocodePackageEntry 2}

	systemMicrocodePackageName OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The name of the microcode package"
		DEFVAL	{ "" }
		::=	{systemMicrocodePackageEntry 3}

	systemMicrocodePackageDescription OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The description of the microcode package"
		DEFVAL	{ "" }
		::=	{systemMicrocodePackageEntry 4}

	systemMicrocodePackageStatus OBJECT-TYPE
		SYNTAX	INTEGER {
							undefined(1),
							ok(2),
							inuse(3)
						}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The status of the microcode package"
		DEFVAL	{ undefined }
		::=	{systemMicrocodePackageEntry 5}

	systemMicrocodePackageSize OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The size of the microcode package"
		DEFVAL	{ 0 }
		::=	{systemMicrocodePackageEntry 6}

	systemMicrocodeComponentTable	OBJECT-TYPE
		SYNTAX	SEQUENCE OF	SystemMicrocodeComponentEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"the microcode Component table"
		::= {systemMicrocode 3}

	systemMicrocodeComponentEntry	OBJECT-TYPE
		SYNTAX	SystemMicrocodeComponentEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"a row in the microcode Component table"
		INDEX {	systemMicrocodeIndex,
				systemMicrocodePackageIndex,
				systemMicrocodeComponentIndex}
		::= {systemMicrocodeComponentTable 1}

	SystemMicrocodeComponentEntry	::= SEQUENCE {
			systemMicrocodeComponentIndex		Unsigned32,
			systemMicrocodeComponentVersion		DisplayString,
			systemMicrocodeComponentName		DisplayString,
			systemMicrocodeComponentDescription	DisplayString,
			systemMicrocodeComponentStatus		INTEGER,
			systemMicrocodeComponentSize		Unsigned32
		}

	systemMicrocodeComponentIndex	OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The index to the Component sub table in the microcode table"
		::= {systemMicrocodeComponentEntry 1}

	systemMicrocodeComponentVersion OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The version of the microcode Component"
		::=	{systemMicrocodeComponentEntry 2}

	systemMicrocodeComponentName OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The name of the microcode Component"
		DEFVAL	{ "" }
		::=	{systemMicrocodeComponentEntry 3}

	systemMicrocodeComponentDescription OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The description of the microcode Component"
		DEFVAL	{ "" }
		::=	{systemMicrocodeComponentEntry 4}

	systemMicrocodeComponentStatus OBJECT-TYPE
		SYNTAX	INTEGER {
							undefined(1),
							ok(2),
							inuse(3)
						}
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The status of the microcode Component"
		DEFVAL	{ undefined }
		::=	{systemMicrocodeComponentEntry 5}

	systemMicrocodeComponentSize OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The size of the microcode Component"
		DEFVAL	{ 0 }
		::=	{systemMicrocodeComponentEntry 6}

	systemMicrocodeDependencyTable	OBJECT-TYPE
		SYNTAX	SEQUENCE OF	SystemMicrocodeDependencyEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"the microcode Dependency table"
		::= {systemMicrocode 4}


	systemMicrocodeDependencyEntry	OBJECT-TYPE
		SYNTAX	SystemMicrocodeDependencyEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"a row in the microcode Dependency table"
		INDEX {	systemMicrocodeIndex,
				systemMicrocodePackageIndex,
				systemMicrocodeComponentIndex,
				systemMicrocodeDependencyIndex}
		::= {systemMicrocodeDependencyTable 1}

	SystemMicrocodeDependencyEntry	::= SEQUENCE {
			systemMicrocodeDependencyIndex			Unsigned32,
			systemMicrocodeDependencyPackageName	DisplayString,
			systemMicrocodeDependencyVersion		DisplayString
		}

	systemMicrocodeDependencyIndex	OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The index to the Dependency sub table in the microcode table"
		::= {systemMicrocodeDependencyEntry 1}

	systemMicrocodeDependencyPackageName OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The name of the microcode Package Dependency"
		DEFVAL	{ "" }
		::=	{systemMicrocodeDependencyEntry 2}

	systemMicrocodeDependencyVersion OBJECT-TYPE
		SYNTAX	DisplayString	(SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"The version of the microcode Dependency"
		::=	{systemMicrocodeDependencyEntry 3}


	-- systemBootParams group.  This group contains the CMM specific
	-- boot parameter information.

	systemBootNetwork	OBJECT-TYPE
		SYNTAX		IpAddress
	    MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"this object is the base IP address of the EMP for this CMM"
		::= { systemBootParams 1 }

	systemBootNetworkGateway	OBJECT-TYPE
		SYNTAX		IpAddress
	    MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"this object is the gateway of the EMP for this CMM"
		::= { systemBootParams 2 }

    systemBootNetworkNetmask	OBJECT-TYPE
        SYNTAX		IpAddress
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
            "This is the Netmask of the EMP that is used when this
			CMM boots."
        ::={ systemBootParams 3 }


	-- systemHardware group.  This group contains hardware information
	-- regarding this CMM.

    systemHardwareFlashMfg	OBJECT-TYPE
		SYNTAX		INTEGER {other(1), amd(2), intel(3), atmel(4), toshiba(7), sandisk(8), sst(9), spansion(10) }
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This object identifies the manufacturer of the Flash memory
			used on this product.  toshiba(7) is for hawk only. The reason 7 is used
			is because 5 is already used for micron and 6 is for kingston.
			toshiba, sandisk, and sst are compact flashes for the hawk only."
		::= { systemHardware 1}

	systemHardwareFlashSize	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This object identifies the size of the flash memory available
			on this CMM.  It is the total flash hardware memory and does
			not indicate how much of the memory is free, used, etc."
		::= { systemHardware 2}

   systemHardwareMemoryMfg	OBJECT-TYPE
		SYNTAX		INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), dataram(10), interward(11), notreadable(12)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This object identifies the manufacturer of the RAM memory
			used on this CMM."
		::= { systemHardware 3}

	systemHardwareMemorySize	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This object identifies the size of the RAM memory available on
			this CMM.  It is the total RAM hardware memory and does not
			indicate how much of the memory is free, used, etc."
		::= { systemHardware 4}

	systemHardwareNVRAMBatteryLow	OBJECT-TYPE
		SYNTAX		TruthValue
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This object identifies the whether the NVRAM battery is low.
			 true(1), false(2)"
		::= { systemHardware 5}

	systemHardwareBootCpuType	OBJECT-TYPE
		SYNTAX		INTEGER	{other(1), sparc380(2), sparcV9(3), ppc(4), ppc8540(5)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"Indicates the manufacturer and model number of the CPU.  Currently,
		only two types of processors are enumerated."
		::={ systemHardware 6 }

	systemHardwareJumperInterruptBoot	OBJECT-TYPE
		SYNTAX	TruthValue
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object identifies whether the Interrupt Boot Jumper on this
			CMM is set: True(1), False(2)"
		DEFVAL {false}
		::= {systemHardware 7}

	systemHardwareJumperForceUartDefaults	OBJECT-TYPE
		SYNTAX	TruthValue
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object identifies whether the Force Uart Defaults Jumper on this
			CMM is set: True(1), False(2)"
		DEFVAL {false}
		::= {systemHardware 8}

	systemHardwareJumperRunExtendedMemoryDiagnostics	OBJECT-TYPE
		SYNTAX	TruthValue
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object identifies whether the Run Extended Memory
			Diagnostics Jumper on this CMM is set: True(1), False(2)"
		DEFVAL {false}
		::= {systemHardware 9}

	systemHardwareJumperSpare	OBJECT-TYPE
		SYNTAX	TruthValue
		MAX-ACCESS	read-only
		STATUS	current
		DESCRIPTION
			"This object identifies whether the Spare Jumper on this
			CMM is set: True(1), False(2)"
		DEFVAL {false}
		::= {systemHardware 10}

	systemHardwareFpgaVersionTable	OBJECT-TYPE
		SYNTAX	SEQUENCE OF	SystemHardwareFpgaVersionEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"This table contains the FPGA version for each FPGA on this CMM"
		::= {systemHardware 11}

	systemHardwareFpgaVersionEntry	OBJECT-TYPE
		SYNTAX	SystemHardwareFpgaVersionEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"a row in the systemHardwareFpgaVersionTable"
		INDEX	{systemHardwareFpgaVersionIndex}
		::= {systemHardwareFpgaVersionTable 1}

	SystemHardwareFpgaVersionEntry ::= SEQUENCE	{
			systemHardwareFpgaVersionIndex	INTEGER,
			systemHardwareFpgaVersion		Unsigned32
		}

	systemHardwareFpgaVersionIndex	OBJECT-TYPE
		SYNTAX INTEGER (1..3)	
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This is the index to one of the FPGA versions on this CMM"
		::={systemHardwareFpgaVersionEntry 1}

	systemHardwareFpgaVersion		OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"This is the major version of one of the FPGA devices on this CMM. 
		 	 refer to the systemHardwareMinorFpgaVersion for the minor number."
		::={systemHardwareFpgaVersionEntry 2}

	systemHardwareBootRomVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the boot rom version"
		DEFVAL		{ "" }
		::={ systemHardware 12 }

	systemHardwareBackupMiniBootVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the backup miniboot version."
		DEFVAL		{ "" }
		::={ systemHardware 13 }

	systemHardwareDefaultMiniBootVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the default miniboot version."
		DEFVAL		{ "" }
		::={ systemHardware 14 }



	systemHardwareMinorFpgaVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the minor FPGA version. Refer to the 
		 systemHardwareFpgaVersion for the major FPGA version number."
		DEFVAL		{ "" }
		::={ systemHardware 15 }

	systemHardwareCpldVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the CPLD version."
		DEFVAL		{ "" }
		::={ systemHardware 16 }

	systemHardwareUbootVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the Uboot version."
		DEFVAL		{ "" }
		::={ systemHardware 17 }

	systemHardwareProdRegId	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the product ID register"
		DEFVAL		{ "" }
		::={ systemHardware 18 }

	systemHardwareRevisionRegister	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the hardware revision register"
		DEFVAL		{ "" }
		::={ systemHardware 19 }

	systemHardwareXfpId	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the XFP ID"
		DEFVAL		{ "" }
		::={ systemHardware 20 }

	systemHardwareUbootMinibootVersion	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A string that identifies the Uboot-miniboot version."
		DEFVAL		{ "" }
		::={ systemHardware 21 }

	-- systemServices group.  This group contains the objects used by the
	-- System Services applications.

	systemServicesDate OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"This object contains the current System Date in the
			following format: MM/DD/YYYY"
		::= { systemServices 1 }

	systemServicesTime OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"This object contains the current System Time in the
			following format: HH:MM:SS"
		::= { systemServices 2 }

	systemServicesTimezone OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"This object contains the current Hour Offset from UTC
			in the following format:  -13:00 to +12:00
				OR
			a well known timezone (PST,CST,etc.)"
		::= { systemServices 3 }

	systemServicesTimezoneStartWeek OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"first, second, third, fourth, fifth, last = 1,2,3,4,5,6"
		DEFVAL		{ 0 }
		::= { systemServices 4 }

	systemServicesTimezoneStartDay OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Sunday, Monday, Tues... = 1,2,3,4,5,6,7"
		DEFVAL		{ 0 }
		::= { systemServices 5 }

	systemServicesTimezoneStartMonth OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"January, February, march... = 1,2,3,4,5,67,8,9,10,11,12"
		DEFVAL		{ 0 }
		::= { systemServices 6 }

	systemServicesTimezoneStartTime OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"2:00, 3:00, 4:00... = 200, 300, 400, etc."
		DEFVAL		{ 0 }
		::= { systemServices 7 }

	systemServicesTimezoneOffset OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"60 minutes = 60"
		DEFVAL		{ 0 }
		::= { systemServices 8 }

	systemServicesTimezoneEndWeek OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"first, second, third, fourth, fifth, last = 1,2,3,4,5,6"
		DEFVAL		{ 0 }
		::= { systemServices 9 }

	systemServicesTimezoneEndDay OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Sunday, Monday, Tues... = 1,2,3,4,5,6,7"
		DEFVAL		{ 0 }
		::= { systemServices 10 }

	systemServicesTimezoneEndMonth OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12"
		DEFVAL		{ 0 }
		::= { systemServices 11 }

	systemServicesTimezoneEndTime OBJECT-TYPE
		SYNTAX		Unsigned32
	    	MAX-ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"2:00, 3:00, 4:00... = 200, 300, 400, etc."
		DEFVAL		{ 0 }
		::= { systemServices 12 }

	systemServicesEnableDST OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enables and disables the DST."
		DEFVAL		{ disabled }
		::= { systemServices 13 }

	systemServicesWorkingDirectory OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object contains the current file system working directory
			for this CMM.  For example, /flash/certified"
		DEFVAL	{"/flash"}
		::= { systemServices 14 }

	systemServicesArg1 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 1st argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 15 }

	systemServicesArg2 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 2nd argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 16 }

	systemServicesArg3 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 3rd argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 17 }

	systemServicesArg4 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 4th argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 18 }

	systemServicesArg5 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 5th argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 19 }

	systemServicesArg6 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 6th argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 20 }

	systemServicesArg7 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 7th argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 21 }

	systemServicesArg8 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 8th argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 22 }

	systemServicesArg9 OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"the 9th argument for system services action routines"
		DEFVAL	{""}
		::= { systemServices 23 }
	systemServicesAction OBJECT-TYPE
		SYNTAX	INTEGER{
					noaction(0),
					mkdir(1),
					rmdir(2),
					mv(3),
					rm(4),
					rmr(5),
					cp(6),
					cpr(7),
					chmodpw(8),
					chmodmw(9),
					fsck(10),
					ftp(11),
					rz(12),
					vi(13),
					telnet(14),
					install(15),
					ed(16),
					more(17),
					newfs(18),
					dshell(19),
					view(20),
					modbootparams(21),
					filedir(22),
					ssh(23),
					sftp(24),
					debugPmdNi(25),
					bootrom(26),
					defaultminiboot(27),
					backupminiboot(28),
					fpgacmm(29),
					ubootcmm(30),
					ubootni(31),
					scp(32),
                    aclman(33),
					ubootMinibootAllSlots(34),
					miniboot(35),
					upgradeLicence(36),
					restoreLicence(37),
	                updateDSineXtroller(38),
					ftp6(39),
					telnet6(40),
					ssh6(41),
					sftp6(42),
					mount(43),
					umount(44),
					backup(45),
					restore(46),
					tftp(47),
					fscollect(48),
					fpgani(49),
					fscollectForce(50)

				}
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object identifies which of the above Actions is to be
			performed by the System Services Application.  Most Actions
			require one or more parameters be set before the Action is
			executed. systemServicesAction - 26 for bootrom, 27 for default miniboot,
			and 28 for backup miniboot use systemServicesArg1 for name of the file

			scp- the first 2 arguments are going to be used. Set arg 1 with the source
			and the arg 2 with the destination file(s).
			E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt
                        For mount and umount, systemServicesArg1 specifies the
                        mount point (such as /uflash).
                        For newfs, systemServicesArg1 contains the name of the
                        file-system (/uflash or /flash) which will be created. On
                        /uflash, a FAT16 file system is created with long name naming conventions.
                        For fsck, systemServicesArg1 contains the name of the
                        file-system (/uflash or /flash) which will be checked and
                        systemServicesArg2 will contain the string repair or
                        no-repair depending on if autocorrection is requested.
                        To see all file systems currently mounted, refer to the
                        systemFileSystemTable.

                        For backup and restore, systemServicesArg1 contains the
                        archive name and systemServicesArg2 through Arg9 contains the 
                        directories and/or files to be archived/extracted.

                        For newfs, fsck, backup and restore, the
                        systemServicesActionPercentComplete variable can be
                        inspected to see a progress indication."

		::= { systemServices 24 }

	systemServicesResultCode OBJECT-TYPE
		SYNTAX		Unsigned32
	    MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"the result of a system services application"
		::= { systemServices 25 }

	systemServicesResultString OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
	    MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"the string result of a system services application"
		::= { systemServices 26 }

	systemServicesKtraceEnable OBJECT-TYPE
		SYNTAX		Enable
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"enables/disables the Ktrace facility"
		DEFVAL { enabled }
		::= { systemServices 27 }

	systemServicesSystraceEnable OBJECT-TYPE
		SYNTAX		Enable
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"enables/disables the Systrace facility"
		DEFVAL { enabled }
		::= { systemServices 28 }

 	systemServicesTtyLines OBJECT-TYPE
		SYNTAX		Unsigned32 (0..255)
	    MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"the number of tty lines for a console screen"
		DEFVAL { 24 }
		::= { systemServices 29 }

	systemServicesTtyColumns OBJECT-TYPE
		SYNTAX		Unsigned32 (0..255)
	    MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"the number of tty columns for a console screen"
		DEFVAL { 80 }
		::= { systemServices 30 }

	systemServicesMemMonitorEnable OBJECT-TYPE
		SYNTAX		Enable
	    MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"disables/enables the kernel Memory Monitor feature"
		DEFVAL { enabled }
		::= { systemServices 31 }

	systemServicesKtraceLevelTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF SystemServicesKtraceLevelEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"the table of Ktrace severity level settings"
		::= { systemServices 32}

    systemServicesKtraceLevelEntry	OBJECT-TYPE
        SYNTAX		SystemServicesKtraceLevelEntry
        MAX-ACCESS	not-accessible
        STATUS	    current
        DESCRIPTION
        	"A row in the system services ktrace level table.  There
			is one entry for each possible Application ID"
        INDEX	{systemServicesKtraceLevelAppId}
        ::= {systemServicesKtraceLevelTable 1}

    SystemServicesKtraceLevelEntry ::= SEQUENCE	{
        	systemServicesKtraceLevelAppId	AppIdIndex,
        	systemServicesKtraceLevel		SeverityLevel
        }

    systemServicesKtraceLevelAppId OBJECT-TYPE
        SYNTAX		AppIdIndex
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
            "the index into the ktrace level table"
        ::= {systemServicesKtraceLevelEntry  1 }

    systemServicesKtraceLevel OBJECT-TYPE
        SYNTAX		SeverityLevel
        MAX-ACCESS	read-write
        STATUS		current
        DESCRIPTION
            "the ktrace level for a specific Application ID"
		DEFVAL { severityLevelDbg3 }
        ::= {systemServicesKtraceLevelEntry  2 }

	systemServicesSystraceLevelTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF SystemServicesSystraceLevelEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"the table of Systrace severity level settings"
		::= { systemServices 33}

    systemServicesSystraceLevelEntry	OBJECT-TYPE
        SYNTAX		SystemServicesSystraceLevelEntry
        MAX-ACCESS	not-accessible
        STATUS		current
        DESCRIPTION
        	"A row in the system services systrace level table.  There
			is one entry for each possible Application ID"
        INDEX	{systemServicesSystraceLevelAppId}
       ::= {systemServicesSystraceLevelTable 1}

    SystemServicesSystraceLevelEntry ::= SEQUENCE 	{
        	systemServicesSystraceLevelAppId	AppIdIndex,
        	systemServicesSystraceLevel	   		SeverityLevel
        }

    systemServicesSystraceLevelAppId OBJECT-TYPE
        SYNTAX		AppIdIndex
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
        "the Systrace level for a specific Application ID."
        ::= {systemServicesSystraceLevelEntry  1 }

    systemServicesSystraceLevel OBJECT-TYPE
        SYNTAX		SeverityLevel
        MAX-ACCESS	read-write
        STATUS		current
        DESCRIPTION
        "the Systrace level for a specific Application ID."
		DEFVAL { severityLevelDbg3 }
        ::= {systemServicesSystraceLevelEntry  2 }


	systemUpdateStatusTable OBJECT-TYPE
                SYNTAX  SEQUENCE OF     SystemUpdateStatusEntry
                MAX-ACCESS      not-accessible
                STATUS  current
                DESCRIPTION
                        "Provides update status for firmware updates"
                ::= {systemServices 34}

        systemUpdateStatusEntry OBJECT-TYPE
                SYNTAX  SystemUpdateStatusEntry
                MAX-ACCESS      not-accessible
                STATUS  current
                DESCRIPTION
                        "A row in the update status table."
                INDEX { systemUpdateIndex}
                ::= {systemUpdateStatusTable 1}

        SystemUpdateStatusEntry ::= SEQUENCE {
                        systemUpdateIndex               INTEGER,
                        systemUpdateStatus              INTEGER,
                        systemUpdateErrorCode           INTEGER
                }

        systemUpdateIndex       OBJECT-TYPE
                SYNTAX  INTEGER(1..72)
		MAX-ACCESS      not-accessible
                STATUS          current
                DESCRIPTION
                        "The index to the CMM for which status is required."
                ::= {systemUpdateStatusEntry 1}

        systemUpdateStatus OBJECT-TYPE
                SYNTAX  INTEGER {
                        inProgress(1),
                        doneOk(2),
                        doneNok(3),
                        noOp(4)
                }
                MAX-ACCESS      read-only
                STATUS  current
                DESCRIPTION
                        "Status of a firmware update.  In the case of doneNok,
                        further information can be obtained from    systemUpdateErrorCode."
                ::=     {systemUpdateStatusEntry 2}

        systemUpdateErrorCode OBJECT-TYPE
                SYNTAX  INTEGER {
                        msgSendIpcErr(1),
                        fXferOPenErr(2),
                        fXferFtpErr(3),
                        fXferReadErr(4),
                        fXferWriteErr(5),
                        fXferReplyErr(6),
                        fXferQuitErr(7),
                        fXferFcloseErr(8),
			fileNameErr(9),
			rmFileErr(10),
                        noInstallComp(11),
                        notSysResource(12),
                        notSupported(13),
                        invalidValue(14),
			waitMsgMaxTry(15),
			installDrvErr(16),
			fileNotFound(17),
			notPrimary(18),
			commandBlocked(19),
			noError(20),
                        invalidNi(21),
                        niNotPresent(22),
                        dupSerialNum(23),
                        upToDate(24),
                        invalidModType(25),
                        maxFaiCount(26),
                        invalidKey(27),
			niLocked(28)
                }
                MAX-ACCESS      read-only
                STATUS  current
                DESCRIPTION
                        "Error codes for done_nok."
                ::=     {systemUpdateStatusEntry 3}

	systemServicesActionPercentComplete OBJECT-TYPE
		SYNTAX      CommandPercentComplete
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
		"This object identifies the percent completion of the currently 
                 executing systemServicesAction."
		::= { systemServices 35 }

	
	systemServicesCurrentArchivePathName OBJECT-TYPE
		SYNTAX      DisplayString (SIZE (0..255))
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
		"This object identifies the archive currently being read
                 via the systemServicesArchiveTable. This object is the complete
                 pathname to the archive and must be set prior to reading the
                 systemServicesArchiveTable."
		::= { systemServices 36 }

	
	systemServicesArchiveTable  OBJECT-TYPE
		SYNTAX  SEQUENCE OF SystemServicesArchiveEntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"This table contains the contents of a backup archive.
			This table is used by the restore action command to
			display (rather than backup) an archive. The restore
			command will populate this table with archive 
			information read from the archive specified by the 
			systemServicesAction restore command. This is done as
			follows. Set the systemServicesArg1 object to the 
			archive name to be read. Set the systemServicesArg2 
			object to the string: display-only. Set the
			systemServicesAction object to restore. Then 
			read this table."
		::= { systemServices 37}
	
	systemServicesArchiveEntry  OBJECT-TYPE
		SYNTAX  SystemServicesArchiveEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
			"A row in the system services archive table."
		INDEX { systemServicesArchiveIndex }
		::= { systemServicesArchiveTable    1 }
	
	SystemServicesArchiveEntry ::= SEQUENCE     {
		systemServicesArchiveIndex  Unsigned32,
		systemServicesArchiveName   DisplayString (SIZE (0..255)),
		systemServicesArchiveType   SystemFileType,
		systemServicesArchiveSize   Unsigned32,
		systemServicesArchiveAttr   INTEGER
		}
	
	
	
	systemServicesArchiveIndex OBJECT-TYPE
		SYNTAX  Unsigned32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
			"Index to a specific entry in the backup archive file."
		::= {systemServicesArchiveEntry 1}
	
	systemServicesArchiveName OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
			"The name of a file in the backup archive file."
		DEFVAL { "" }
		::= { systemServicesArchiveEntry 2 }
	
	systemServicesArchiveType OBJECT-TYPE
		SYNTAX  SystemFileType
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION
			"The type of a file in the backup archive file."
		DEFVAL { undefined }
		::= { systemServicesArchiveEntry 3 }
	
	systemServicesArchiveSize OBJECT-TYPE
		SYNTAX          Unsigned32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION
			"The size of a file in the backup archive file."
		DEFVAL { 0 }
		::= { systemServicesArchiveEntry 4 }
	
	systemServicesArchiveAttr OBJECT-TYPE
		SYNTAX          INTEGER {
			undefined(1),
			readOnly(2),
			readWrite(3),
			writeOnly(4)
		}
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION
			"The attributes of a file in the backup archive file."
		DEFVAL { undefined }
		::= { systemServicesArchiveEntry 5 }
	
	systemServicesUsbEnable  OBJECT-TYPE
		SYNTAX      Enable
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
			"disable/enable the USB interface"
		::= { systemServices 38}
	
	systemServicesUsbAutoCopyEnable  OBJECT-TYPE
		SYNTAX      Enable
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
			"disable/enable the USB auto-copy facility"
		::= { systemServices 39}
	
	systemServicesUsbDisasterRecoveryEnable  OBJECT-TYPE
		SYNTAX      Enable
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
			"disable/enable the USB disaster-recovery factility"
		::= { systemServices 40}
	

--systemFileSystem group.  This group contains the parameters for
--the multiple File Systems on the platform. 

    systemFileSystemTable	OBJECT-TYPE
		SYNTAX	SEQUENCE OF SystemFileSystemEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"system file system table for this CMM."
		::= { systemFileSystem 1}

	systemFileSystemEntry	OBJECT-TYPE
		SYNTAX	SystemFileSystemEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A row in the system file system table"
		INDEX	{systemFileSystemIndex}
		::= {systemFileSystemTable 1}

	SystemFileSystemEntry ::= SEQUENCE 	{
			systemFileSystemIndex		FileSystemIndex,
			systemFileSystemName		DisplayString (SIZE (0..255)),
			systemFileSystemFreeSpace	Unsigned32
		}

	systemFileSystemIndex OBJECT-TYPE
		SYNTAX	FileSystemIndex
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Index to a specific file system."
		::= {systemFileSystemEntry 1}

	systemFileSystemName OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The name of the file system."
		DEFVAL { "" }
		::= { systemFileSystemEntry 2 }

	systemFileSystemFreeSpace	OBJECT-TYPE
		SYNTAX			Unsigned32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION
			"the free space in octets of this file system"
		DEFVAL { 0 }
		::= { systemFileSystemEntry 3 }

	systemFileSystemDirectoryName OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"The name of a file system directory.  This object is used in conjunction
			with an Action command.  The Action command will set this directory
			name to the name of a specific directory.  Information for all of the
			files in that directory will then be read from the file system and
			the appropriate values written in the entries in the systemFileSystemFile
			table.  All this is being done to give snmp access to the file system
			files."
		DEFVAL { "" }
		::= { systemFileSystem 2 }

	systemFileSystemDirectoryDateTime OBJECT-TYPE
		SYNTAX			DisplayString (SIZE (0..255))
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION
			"the date and time (in system format) of the last access to this directory"
		DEFVAL { "" }
		::= { systemFileSystem 3 }

    systemFileSystemFileTable	OBJECT-TYPE
		SYNTAX	SEQUENCE OF SystemFileSystemFileEntry
		MAX-ACCESS	not-accessible
		STATUS	current
		DESCRIPTION
			"system file system File table for this CMM.  This table is used by
			an Action command which will populate it with file information read
			from the files in the specified directory."
		::= { systemFileSystem 4}

	systemFileSystemFileEntry	OBJECT-TYPE
		SYNTAX	SystemFileSystemFileEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A row in the system file system File table"
		INDEX {	systemFileSystemFileIndex}		-- base table index
		::= {systemFileSystemFileTable 1}

	SystemFileSystemFileEntry ::= SEQUENCE 	{
			systemFileSystemFileIndex		Unsigned32,
			systemFileSystemFileName		DisplayString (SIZE (0..255)),
			systemFileSystemFileType		SystemFileType,
			systemFileSystemFileSize		Unsigned32,
			systemFileSystemFileAttr		INTEGER,
			systemFileSystemFileDateTime	DisplayString (SIZE (0..255))
		}

	systemFileSystemFileIndex OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"Index to a specific file system File."
		::= {systemFileSystemFileEntry 1}

	systemFileSystemFileName OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The name of a file system File"
		DEFVAL { "" }
		::= { systemFileSystemFileEntry 2 }

	systemFileSystemFileType OBJECT-TYPE
		SYNTAX	SystemFileType
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The Type of a file system File"
		DEFVAL { undefined }
		::= { systemFileSystemFileEntry 3 }

	systemFileSystemFileSize OBJECT-TYPE
		SYNTAX			Unsigned32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION
			"size of this file"
		DEFVAL { 0 }
		::= { systemFileSystemFileEntry 4 }

	systemFileSystemFileAttr OBJECT-TYPE
		SYNTAX			INTEGER {
									undefined(1),
									readOnly(2),
									readWrite(3),
									writeOnly(4)
						}
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION
			"attributes of this file"
		DEFVAL { undefined }
		::= { systemFileSystemFileEntry 5 }

	systemFileSystemFileDateTime OBJECT-TYPE
		SYNTAX			DisplayString (SIZE (0..255))
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION
			"the modification date and time of a file"
		DEFVAL { "" }
		::= { systemFileSystemFileEntry 6 }

	--systemSwitchLogging group.  This group contains the Switch Logging
	--configuration data.

	systemSwitchLoggingIndex	OBJECT-TYPE
		SYNTAX		SwitchLoggingIndex
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"A small positive integer used to identify a switch logging
			output"
		DEFVAL { flash }
		::={ systemSwitchLogging 1 }

	systemSwitchLoggingEnable	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Global switch logging enable/disable"
		DEFVAL { enabled }
		::={ systemSwitchLogging 2 }

	systemSwitchLoggingFlash	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Enable/disable switch logging to flash"
		DEFVAL { enabled }
		::={ systemSwitchLogging 3 }

	systemSwitchLoggingSocket	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Enable/disable switch logging to a socket"
		DEFVAL { disabled }
		::={ systemSwitchLogging 4 }

	systemSwitchLoggingSocketIpAddr	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION
			"The IP Address of a remote host that can
			be used to send switch logging records to as an option"
		::={ systemSwitchLogging 5 }

	systemSwitchLoggingConsole	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Enable/disable switch logging to the console"
		DEFVAL { disabled }
		::={ systemSwitchLogging 6 }

	systemSwitchLoggingLevelTable	OBJECT-TYPE
		SYNTAX		SEQUENCE OF SystemSwitchLoggingLevelEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
		"The table of switch logging level settings, one for each
		Application ID"
		::={ systemSwitchLogging 7}

	systemSwitchLoggingClear	OBJECT-TYPE
		SYNTAX	Unsigned32
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Enable clearing of switch logging entries"
		::={ systemSwitchLogging 8 }

	systemSwitchLoggingFileSize	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Set size of swlog logging file"
		::={ systemSwitchLogging 9 }

	systemSwitchLoggingLevelEntry	OBJECT-TYPE
		SYNTAX		SystemSwitchLoggingLevelEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
		"A row in the system switch logging level table"
		INDEX {systemSwitchLoggingLevelAppId}
		::={ systemSwitchLoggingLevelTable 1 }

	SystemSwitchLoggingLevelEntry  ::= SEQUENCE {
			systemSwitchLoggingLevelAppId	AppIdIndex,
			systemSwitchLoggingLevel		SeverityLevel
		}

	systemSwitchLoggingLevelAppId	OBJECT-TYPE
		SYNTAX		AppIdIndex
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
		"A specific application ID which has a severity level associated
		with it.  This application ID is used as an index into the level
		table."
		::={ systemSwitchLoggingLevelEntry 1 }

	systemSwitchLoggingLevel	OBJECT-TYPE
		SYNTAX		SeverityLevel
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
		"The logging level for a specific application id."
		::={ systemSwitchLoggingLevelEntry 2 }


	systemSwitchLoggingHostTable	OBJECT-TYPE
		SYNTAX		SEQUENCE OF SystemSwitchLoggingHostEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
		"The table of switch logging remote hosts."
		::={ systemSwitchLogging 10}

	systemSwitchLoggingHostEntry  OBJECT-TYPE
	    SYNTAX  SystemSwitchLoggingHostEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
            DESCRIPTION
		 "A remote switch logging server entry."
            INDEX { systemSwitchLoggingHostIpAddr }
		::={ systemSwitchLoggingHostTable 1 }

	SystemSwitchLoggingHostEntry  ::= SEQUENCE {
            systemSwitchLoggingHostIpAddr     IpAddress,
            systemSwitchLoggingHostPort       INTEGER,
	    systemSwitchLoggingHostUserCommandHost	Enable,
            systemSwitchLoggingHostStatus     RowStatus
	    }

	systemSwitchLoggingHostIpAddr	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The IP Address of a remote host that can
			be used to send switch logging records to."
		::={ systemSwitchLoggingHostEntry 1 }

	systemSwitchLoggingHostPort	OBJECT-TYPE
		SYNTAX		INTEGER (1..65535)
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"The port number of a remote host that can
			be used to send switch logging records to."
		DEFVAL	{ 514 }
		::={ systemSwitchLoggingHostEntry 2 }

	systemSwitchLoggingHostUserCommandHost	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Indicates whether this host may receive user
			  command data."
		DEFVAL	{ disabled }
		::={ systemSwitchLoggingHostEntry 4 }

	systemSwitchLoggingHostStatus	OBJECT-TYPE
		SYNTAX		RowStatus
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Provides the ability to add or remove a remote host entry."
		::={ systemSwitchLoggingHostEntry 3 }

	systemSwitchLoggingHostv6Table	OBJECT-TYPE
		SYNTAX		SEQUENCE OF SystemSwitchLoggingHostv6Entry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
		"The table of switch logging remote hosts."
		::={ systemSwitchLogging 11 }

	systemSwitchLoggingHostv6Entry  OBJECT-TYPE
	    SYNTAX  SystemSwitchLoggingHostv6Entry
	    MAX-ACCESS  not-accessible
	    STATUS  current
            DESCRIPTION
		 "A remote switch logging server entry."
            INDEX { systemSwitchLoggingHostv6IpAddr }
		::={ systemSwitchLoggingHostv6Table 1 }

	SystemSwitchLoggingHostv6Entry  ::= SEQUENCE {
            systemSwitchLoggingHostv6IpAddr    Ipv6Address,
            systemSwitchLoggingHostv6Port      INTEGER,
	    systemSwitchLoggingHostv6UserCommandHost	Enable,
            systemSwitchLoggingHostv6Status    RowStatus
	    }

	systemSwitchLoggingHostv6IpAddr	OBJECT-TYPE
		SYNTAX		Ipv6Address
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The IP Address of a remote host that can
			be used to send switch logging records to."
		::={ systemSwitchLoggingHostv6Entry 1 }

	systemSwitchLoggingHostv6Port	OBJECT-TYPE
		SYNTAX		INTEGER (1..65535)
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"The port number of a remote host that can
			be used to send switch logging records to."
		DEFVAL	{ 514 }
		::={ systemSwitchLoggingHostv6Entry 2 }

	systemSwitchLoggingHostv6UserCommandHost	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Indicates whether this host may receive user
			  command data."
		DEFVAL	{ disabled }
		::={ systemSwitchLoggingHostv6Entry 4 }

	systemSwitchLoggingHostv6Status	OBJECT-TYPE
		SYNTAX		RowStatus
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Provides the ability to add or remove a remote host entry."
		::={ systemSwitchLoggingHostv6Entry 3 }



	systemSwitchLoggingHostCount	OBJECT-TYPE
		SYNTAX		INTEGER (0..4)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of remote hosts currently defined."
		::={ systemSwitchLogging 12}


	systemSwitchLoggingConsoleLevel	OBJECT-TYPE
		SYNTAX		SeverityLevel
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Messages whose severity level is equal to or more
			 severe than this value will be displayed to the console."
		DEFVAL	{ severityLevelWarn }
		::={ systemSwitchLogging 13}

	systemSwitchLoggingUserCommandStatus	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"User commands will be logged to remote hosts when enabled."
		DEFVAL	{ disabled }
		::={ systemSwitchLogging 14}

	systemSwitchLoggingSysLogFacilityId  OBJECT-TYPE
		SYNTAX	      SysLogFacilityId
		MAX-ACCESS    read-write
		STATUS        current
		DESCRIPTION   "This textual convention enumerates the facilities
        	    that originate syslog messages.
	
        	    The Facilities of syslog messages are numerically
	            coded with decimal values.
	            Some of the operating system daemons and processes
	            are traditionally designated by the Facility values
	            given below. Daemons and processes that do not have
	            an explicitly assigned Facility may use any of the
	            'local use' Facilities or they may use the 'user-level'
	            Facility.

	            For interoperability and backwards compatibility
	            reasons, mapping specified in this document between
	            a label which represents a Facility and
	            the value which represents the corresponding code, is
	            normative. So the mapping from a label configured by
	            operators in syslog.conf or equivalent will consistently
	            map to the same Facility code regardless of
	            implementation, but the label itself is often
	            semantically meaningless, because it is impractical to
	            attempt to enumerate all possible facilities, and the
	            enumeration (label and corresponding value) that is used
	            by an actual Facility is, and has historically been,
	            implementation-dependent.

	            For example, the foobar application might log messages
	            as having come from local7, even though there is no
	            'local' process on the device, and the operator can
	            configure syslog.conf to have local7.critical messages
	            be relayed, even though there might be multiple facilities
	            using Facility local7. This is typical current practice,
	            and originators, relays and collectors know how to handle
	            this situation. For improved accuracy, the foobar
	            application can also include an APPNAME Structured Data
	            Element."
		DEFVAL  { uucp }
		::={ systemSwitchLogging 15}

	--systemDNS group.  This group contains the Domain Name Service
	--configuration information.

	systemDNSEnableDnsResolver	OBJECT-TYPE
		SYNTAX		Enable
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"Global Domain Name Service enable/disable"
		DEFVAL { disabled }
		::={ systemDNS 1 }

	systemDNSDomainName	OBJECT-TYPE
		SYNTAX		DisplayString (SIZE (0..255))
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"current domain name used by the Domain Name Service"
		DEFVAL { "" }
		::={ systemDNS 2 }

	systemDNSNsAddr1	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"1st part of address used by the Domain Name Service"
		DEFVAL { 0 }
		::={ systemDNS 3 }

	systemDNSNsAddr2	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"2nd part of address used by the Domain Name Service"
		DEFVAL { 0 }
		::={ systemDNS 4 }

	systemDNSNsAddr3	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"3rd part of address used by the Domain Name Service"
		DEFVAL { 0 }
		::={ systemDNS 5 }

	systemDNSNsIPv6Addr1	OBJECT-TYPE
		SYNTAX		Ipv6Address
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"IPv6 address of the Primary DNS server"
		DEFVAL { "" }
		::={ systemDNS 6 }

	systemDNSNsIPv6Addr2	OBJECT-TYPE
		SYNTAX		Ipv6Address
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"IPv6 address of the Secondary DNS server"
		DEFVAL { "" }
		::={ systemDNS 7 }

	systemDNSNsIPv6Addr3	OBJECT-TYPE
		SYNTAX		Ipv6Address
		MAX-ACCESS	read-create
		STATUS		current
		DESCRIPTION
			"IPv6 address of the third DNS server"
		DEFVAL { "" }
		::={ systemDNS 8 }
--
-- Compliance Statements
--

    alcatelIND1SystemMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for
             Alcatel BOP Proprietary System Subsystem."
        MODULE  -- this module

            MANDATORY-GROUPS
            {
                systemMicrocodeGroup,
				systemBootParamsGroup,
				systemHardwareGroup,
				systemServicesGroup,
				systemFileSystemGroup,
				systemSwitchLoggingGroup,
				systemDNSGroup
            }

        ::= { alcatelIND1SystemMIBCompliances 1 }

--
-- Units Of Conformance
--
    systemMicrocodeGroup OBJECT-GROUP
        OBJECTS     {
				systemMicrocodeIndex,
				systemMicrocodePackageIndex,
				systemMicrocodePackageVersion,
				systemMicrocodePackageName,
				systemMicrocodePackageDescription,
				systemMicrocodePackageStatus,
				systemMicrocodePackageSize,
				systemMicrocodeComponentIndex,
				systemMicrocodeComponentVersion,
				systemMicrocodeComponentName,
				systemMicrocodeComponentDescription,
				systemMicrocodeComponentStatus,
				systemMicrocodeComponentSize,
				systemMicrocodeDependencyIndex,
				systemMicrocodeDependencyPackageName,
				systemMicrocodeDependencyVersion
			}
        STATUS      current
        DESCRIPTION
            "Group all the system microcode objects together"
        ::= { alcatelIND1SystemMIBGroups 1 }

    systemBootParamsGroup OBJECT-GROUP
        OBJECTS	{
			systemBootNetwork,
			systemBootNetworkGateway,
			systemBootNetworkNetmask
		}
        STATUS      current
        DESCRIPTION
            "Group all the system boot parameters together"
        ::= { alcatelIND1SystemMIBGroups 2 }

    systemHardwareGroup OBJECT-GROUP
        OBJECTS     {
			systemHardwareFlashMfg,
			systemHardwareFlashSize,
			systemHardwareMemoryMfg,
	      	systemHardwareMemorySize,
			systemHardwareNVRAMBatteryLow,
			systemHardwareBootCpuType,
			systemHardwareJumperInterruptBoot,
			systemHardwareJumperForceUartDefaults,
			systemHardwareJumperRunExtendedMemoryDiagnostics,
			systemHardwareJumperSpare,
			systemHardwareFpgaVersionIndex,
			systemHardwareFpgaVersion,
			systemHardwareBootRomVersion,
			systemHardwareDefaultMiniBootVersion,
			systemHardwareBackupMiniBootVersion
        }
        STATUS      current
        DESCRIPTION
            "Group all the system Hardware Data together"
        ::= { alcatelIND1SystemMIBGroups 3 }

	systemServicesGroup OBJECT-GROUP
        OBJECTS {
				systemServicesDate,
				systemServicesTime,
				systemServicesTimezone,
				systemServicesTimezoneStartWeek,
				systemServicesTimezoneStartDay,
				systemServicesTimezoneStartMonth,
				systemServicesTimezoneStartTime,
				systemServicesTimezoneOffset,
				systemServicesTimezoneEndWeek,
				systemServicesTimezoneEndDay,
				systemServicesTimezoneEndMonth,
				systemServicesTimezoneEndTime,
				systemServicesEnableDST,
				systemServicesWorkingDirectory,
				systemServicesArg1,
				systemServicesArg2,
				systemServicesArg3,
				systemServicesArg4,
				systemServicesArg5,
				systemServicesArg6,
				systemServicesArg7,
				systemServicesArg8,
				systemServicesArg9,
				systemServicesAction,
				systemServicesResultCode,
				systemServicesResultString,
				systemServicesKtraceEnable,
				systemServicesSystraceEnable,
				systemServicesTtyLines,
				systemServicesTtyColumns,
				systemServicesMemMonitorEnable,
				systemServicesKtraceLevelAppId,
				systemServicesKtraceLevel,
				systemServicesSystraceLevelAppId,
                                systemServicesSystraceLevel,
                                systemUpdateStatus,
                                systemUpdateErrorCode,
                                systemServicesActionPercentComplete,
                                systemServicesArchiveName,
                                systemServicesArchiveType,
                                systemServicesArchiveSize,
                                systemServicesArchiveAttr,
				systemServicesUsbEnable,
				systemServicesUsbAutoCopyEnable,
				systemServicesUsbDisasterRecoveryEnable
			}
        STATUS  current
        DESCRIPTION
            "Group all the system services parameters together"
        ::= { alcatelIND1SystemMIBGroups 4 }

	systemFileSystemGroup OBJECT-GROUP
		OBJECTS	{
			systemFileSystemIndex,
			systemFileSystemFreeSpace,
			systemFileSystemName,
			systemFileSystemDirectoryName,
			systemFileSystemDirectoryDateTime,
			systemFileSystemFileIndex,
			systemFileSystemFileName,
			systemFileSystemFileType,
			systemFileSystemFileSize,
			systemFileSystemFileAttr,
			systemFileSystemFileDateTime
		}
        STATUS      current
        DESCRIPTION
         "Group all the system flash file parameters together"
        ::= { alcatelIND1SystemMIBGroups 5 }

	systemSwitchLoggingGroup OBJECT-GROUP
		OBJECTS{
				systemSwitchLoggingIndex,
				systemSwitchLoggingEnable,
				systemSwitchLoggingFlash,
				systemSwitchLoggingSocket,
				systemSwitchLoggingSocketIpAddr,
				systemSwitchLoggingConsole,
				systemSwitchLoggingClear,
				systemSwitchLoggingFileSize,
				systemSwitchLoggingLevel,
				systemSwitchLoggingLevelAppId
			}
        	STATUS      current
        	DESCRIPTION
         	"Group all the switch logging parameters together"
        	::= { alcatelIND1SystemMIBGroups 6 }

	systemDNSGroup OBJECT-GROUP
		OBJECTS{
				systemDNSEnableDnsResolver,
				systemDNSDomainName,
				systemDNSNsAddr1,
				systemDNSNsAddr2,
				systemDNSNsAddr3,
				systemDNSNsIPv6Addr1,
				systemDNSNsIPv6Addr2,
				systemDNSNsIPv6Addr3
			}
        	STATUS      current
        	DESCRIPTION
         	"Group all the systemDNS parameters together"
        	::= { alcatelIND1SystemMIBGroups 7 }

END