path: root/MIBS/nokia/ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB

ALCATEL-IND1-PORT-MIRRORING-MONITORING-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-TYPE,
	MODULE-IDENTITY,
	OBJECT-IDENTITY,
	NOTIFICATION-TYPE              FROM SNMPv2-SMI
	MODULE-COMPLIANCE,
	OBJECT-GROUP,
	NOTIFICATION-GROUP             FROM SNMPv2-CONF
        DisplayString,
	TEXTUAL-CONVENTION,
        RowStatus		       FROM SNMPv2-TC
	InterfaceIndex			FROM IF-MIB
	portMirroringMonitoringTraps,
        softentIND1PortMirroringMonitoring              FROM ALCATEL-IND1-BASE
        sFlowFsEntry,
        sFlowCpEntry 			FROM SFLOW-MIB
	InetAddress,   
        InetAddressType           FROM INET-ADDRESS-MIB; 
		
 
	alcatelIND1PortMirrorMonitoringMIB MODULE-IDENTITY
		LAST-UPDATED "200704030000Z"
		ORGANIZATION "Alcatel-Lucent"
		CONTACT-INFO
            "Please consult with Customer Service to ensure the most appropriate
             version of this document is used with the products in question:
         
                        Alcatel-Lucent, Enterprise Solutions Division
                       (Formerly Alcatel Internetworking, Incorporated)
                               26801 West Agoura Road
                            Agoura Hills, CA  91301-5122
                              United States Of America
        
            Telephone:               North America  +1 800 995 2696
                                     Latin America  +1 877 919 9526
                                     Europe         +31 23 556 0100
                                     Asia           +65 394 7933
                                     All Other      +1 818 878 4507
        
            Electronic Mail:         support@ind.alcatel.com
            World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
            File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

		DESCRIPTION
			"This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):
         
                 For the Birds Of Prey Product Line
		 Port Mirroring and Monitoring for mirroring/monitoring session control
         
             The right to make changes in specification and other information
             contained in this document without prior notice is reserved.
         
             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.
         
             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.
         
                         Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"

		REVISION      "200704030000Z"
        DESCRIPTION
            "Addressing discrepancies with Alcatel Standard."
     	        ::= { softentIND1PortMirroringMonitoring 1}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

	alcatelIND1PortMirMonMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Port Mirroring and Monitoring
            Subsystem Managed Objects."
            ::= { alcatelIND1PortMirrorMonitoringMIB 1 }


    alcatelIND1PortMirMonMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Port Mirroring and Monitoring
            Subsystem Conformance Information."
            ::= { alcatelIND1PortMirrorMonitoringMIB 2 }


    alcatelIND1PortMirMonMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Port Mirroring and Monitoring
            Subsystem Units Of Conformance."
            ::= { alcatelIND1PortMirMonMIBConformance 1}


    alcatelIND1PortMirMonMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For Port Mirroring and Monitoring
            Subsystem Compliance Statements."
            ::= { alcatelIND1PortMirMonMIBConformance 2}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

	mirmonMirroring  OBJECT IDENTIFIER ::= { alcatelIND1PortMirMonMIBObjects 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

mirrorTable  OBJECT-TYPE
	    SYNTAX  SEQUENCE OF MirrorEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
		"A list of port mirroring instances."
            ::= { mirmonMirroring 1 }


mirrorEntry  OBJECT-TYPE
	SYNTAX  MirrorEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A port  mirroring entry."
	INDEX { mirrorSessionNumber }
	    ::= { mirrorTable 1 }


MirrorEntry ::= SEQUENCE {
	mirrorSessionNumber
		INTEGER,
	mirrorMirroredIfindex
		InterfaceIndex,
	mirrorMirroringIfindex
		InterfaceIndex,
	mirrorStatus
		INTEGER,
	mirrorUnblockedVLAN
		INTEGER,
        mirrorRowStatus
		RowStatus,
	mirrorDirection
		INTEGER,
	mirrorSessOperStatus
		INTEGER,
        mirrorTaggedVLAN
                INTEGER
	}

mirrorSessionNumber OBJECT-TYPE
	SYNTAX  INTEGER  (1..2147483647)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"Identifies a specific port mirroring instance."
           DEFVAL  { 1 }
           ::= { mirrorEntry 1 }	

mirrorMirroredIfindex  OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-write
	STATUS deprecated 
	DESCRIPTION
		" This variable is deprecated and value will be ignored. Please use mirrorSrcTable
		 to configure mirrored ports.
		The physical identification number for this mirroring port instance (mirrorred port)."
	::= { mirrorEntry 2 }

mirrorMirroringIfindex  OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		" The physical identification number for this mirroring port instance (mirroring port)."
	    ::= { mirrorEntry 3 }
 
mirrorStatus  OBJECT-TYPE
	SYNTAX  INTEGER {
		off (1),
		on (2)
	}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Whether mirroring is enabled or disabled for this port.
		 Prior to enabling mirroring, or at the same time all other
		 read write values in this table for the same row must
		 be set to appropriate values, or defaults will be assumed."
            DEFVAL  { on }
	    ::= { mirrorEntry 4 }



mirrorUnblockedVLAN OBJECT-TYPE
	SYNTAX  INTEGER  (0..2147483647)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"A VLAN identifier which specifies the VLAN identifier that must remain unblocked no matter what is the output of the spanning tree algorithm.Value 0 indicates this parameter is not set"
           ::= { mirrorEntry 5 }	



mirrorRowStatus OBJECT-TYPE
	 	SYNTAX  RowStatus
		MAX-ACCESS  read-write
		STATUS  current
		DESCRIPTION
		        "The status of this table entry.  
		         "
           ::= { mirrorEntry 6 }	

mirrorDirection  OBJECT-TYPE
	SYNTAX  INTEGER {
		inport (1),
		outport (2),
		bidirectional (3)
	}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		 " This variable is deprecated and the value will be ignored.
		 Please use mirrorSrcTable to set the direction of mirroring.
			Direction of mirroring."
            DEFVAL  { bidirectional }
	    ::= { mirrorEntry 7 }

mirrorSessOperStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		off (1),
		on (2)
	}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Whether mirroring session is active. "
	DEFVAL  { on }
	    ::= { mirrorEntry 8 }

mirrorTaggedVLAN OBJECT-TYPE
        SYNTAX  INTEGER  (0..2147483647)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "A VLAN identifier which specifies the VLAN identifier that must used to tag the mirrored packets going
out of the MTP for remote port mirroring .Value 0 indicates this parameter is not set"
           ::= { mirrorEntry 9 }

-- xxxxxxxxxxxxxxxxxxx
-- Mirror Source Table 
-- xxxxxxxxxxxxxxxxxxx


mirrorSrcTable  OBJECT-TYPE
	    SYNTAX  SEQUENCE OF MirrorSrcEntry
	    MAX-ACCESS  not-accessible
	    STATUS  current
	    DESCRIPTION
		"A list of port mirroring instances."
            ::= { mirmonMirroring 2 }


mirrorSrcEntry  OBJECT-TYPE
	SYNTAX  MirrorSrcEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A port  mirroring entry."
	INDEX { mirrorSessionNumber, mirrorSrcMirroredIf }
	    ::= { mirrorSrcTable 1 }


MirrorSrcEntry ::= SEQUENCE {
	mirrorSrcMirroredIf
		InterfaceIndex,
	mirrorSrcStatus
		INTEGER,
	mirrorSrcDirection
		INTEGER,
        mirrorSrcRowStatus
		RowStatus,
	mirrorSrcOperStatus
		INTEGER
	}

mirrorSrcMirroredIf  OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The physical identification number for this mirroring port instance (mirrorred port)."
	::= { mirrorSrcEntry 1 }

mirrorSrcStatus  OBJECT-TYPE
	SYNTAX  INTEGER {
		disable (1),
		enable (2)
	}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Whether mirroring is enabled or disabled for this port.
		 Prior to enabling mirroring, or at the same time all other
		 read write values in this table for the same row must
		 be set to appropriate values, or defaults will be assumed."
            DEFVAL  { enable }
	    ::= { mirrorSrcEntry 2 }

mirrorSrcDirection  OBJECT-TYPE
	SYNTAX  INTEGER {
		inport (1),
		outport (2),
		bidirectional (3)
	}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		 "Direction of mirroring on the source port of this entry."
            DEFVAL  { bidirectional }
	    ::= { mirrorSrcEntry 3 }

mirrorSrcRowStatus OBJECT-TYPE
	 	SYNTAX  RowStatus
		MAX-ACCESS  read-write
		STATUS  current
		DESCRIPTION
		        "The status of this table entry.Row Status to control creation,
			modification and deletion of this entry. "
           ::= { mirrorSrcEntry 4 }

mirrorSrcOperStatus  OBJECT-TYPE
	SYNTAX  INTEGER {
		off (1),
		on (2)
	}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		 "The mirroring operational status of this mirrored source. "
            DEFVAL  { on }
	    ::= { mirrorSrcEntry 5 }



-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

        mirmonMonitoring  OBJECT IDENTIFIER ::= { alcatelIND1PortMirMonMIBObjects 2 }

	    
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


monitorTable OBJECT-TYPE
               SYNTAX  SEQUENCE OF MonitorEntry
               MAX-ACCESS  not-accessible
               STATUS  current
           DESCRIPTION
                       "A list of port monitoring instances."
                   ::= { mirmonMonitoring 1 }
       
       monitorEntry  OBJECT-TYPE
               SYNTAX  MonitorEntry
               MAX-ACCESS  not-accessible
               STATUS  current
               DESCRIPTION
                       "A port  monitoring entry."
                   INDEX { monitorSessionNumber }
                   ::= { monitorTable 1 }
       
       MonitorEntry ::= SEQUENCE {
               monitorSessionNumber
                       INTEGER,
               monitorIfindex
                       InterfaceIndex,
               monitorFileStatus
                       INTEGER,
               monitorFileName
                       DisplayString ,
               monitorFileSize
                       INTEGER,        
               monitorScreenStatus
                       INTEGER,
               monitorScreenLine
                       INTEGER,
               monitorTrafficType
                       INTEGER,
               monitorStatus
                       INTEGER,
               monitorFileOverWrite
                         INTEGER,
               monitorDirection
                         INTEGER,
               monitorTimeout
                         INTEGER,
               monitorRowStatus
                       RowStatus

               }
       
       
       monitorSessionNumber OBJECT-TYPE
               SYNTAX  INTEGER  (1..2147483647)
	       MAX-ACCESS read-only
               STATUS current
               DESCRIPTION
                       "Identifies a specific port monitoring instance."
                  DEFVAL  { 1 }
                  ::= { monitorEntry 1 }       
       
       monitorIfindex  OBJECT-TYPE
               SYNTAX  InterfaceIndex
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
                       "The physical identification number for this monitoring port instance."
                   DEFVAL  { 1 }
                   ::= { monitorEntry 2 }
       
       monitorFileStatus OBJECT-TYPE
               SYNTAX  INTEGER {
                       off (1),
                       on (2)
               }
               MAX-ACCESS read-write
               STATUS current
               DESCRIPTION
                       "The status of the file option of a monitoring port instance (default off)"
                   DEFVAL  { off }
                   ::= { monitorEntry 3 } 
       
       monitorFileName  OBJECT-TYPE
               SYNTAX  DisplayString(SIZE(0..255))
               MAX-ACCESS  read-write
               STATUS  current 
               DESCRIPTION
                       "The name of the file in which the traffic will be stored (default PMONITOR.ENC)."
                   ::= { monitorEntry 4 }
       
       monitorFileSize OBJECT-TYPE     
               SYNTAX  INTEGER  (1..2147483647)
               MAX-ACCESS read-write
               STATUS current
               DESCRIPTION
       "The number of  16384 ( 16K ) bytes allowed for the file. The file contains only the last monitorFileSize bytes of the current port monitoring instance (default 16384 bytes)." 
                   DEFVAL  { 1}
                   ::= {  monitorEntry 5 }
       
       monitorScreenStatus  OBJECT-TYPE
               SYNTAX  INTEGER {
                       off (1),
                       on (2)
               }
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
                       "The status of the screen option of a monitoring port instance (default off)"
                   DEFVAL  { off }
                   ::= { monitorEntry 6 }
       
       monitorScreenLine  OBJECT-TYPE
               SYNTAX  INTEGER  (1..2147483647)
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
                       "The number of lines used when the screen option is activated (default 24)"
                   DEFVAL  { 24 }
                   ::= { monitorEntry 7 }
       
       
       monitorTrafficType OBJECT-TYPE
               SYNTAX  INTEGER {
                       all         (1),
                       unicast     (2),
                       multicast   (3),
                       broadcast   (4),
                       unimulti    (5),
                       unibroad    (6),
                       multibroad  (7)
               }
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
                       "The type of traffic being monitored (default all)"
               DEFVAL  { all }
               ::= { monitorEntry 8 } 
       
       monitorStatus OBJECT-TYPE
               SYNTAX  INTEGER {
                       off (1),
                       on  (2),
                       suspended (3)
               }
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
                       "The status of the port monitoring instance"
                   DEFVAL  { off }
                   ::= { monitorEntry 9 }
       

-- anand
       monitorFileOverWrite  OBJECT-TYPE
               SYNTAX  INTEGER {
                       off (1),
                       on (2)
               }
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
                       "The status of the File Over Write option of a monitoring port instance (default on)"
                   DEFVAL  { on }
                   ::= { monitorEntry 10 }
       monitorDirection  OBJECT-TYPE
                        SYNTAX  INTEGER {
                                inport (1),
                                outport (2),
                                bidirectional (3)
                       }
                       MAX-ACCESS  read-write
                       STATUS  current
                       DESCRIPTION
                                "Direction of monitoring."
                           DEFVAL  { bidirectional }

                           ::= { monitorEntry 11 }


       monitorTimeout OBJECT-TYPE     
               SYNTAX  INTEGER  (0..2147483647)
               MAX-ACCESS read-write
               STATUS current
               DESCRIPTION
                       "The number of seconds allowed for this session before the session gets deleted.
                        (default:forever 0 second)." 
               DEFVAL  { 0 }
               ::= { monitorEntry 12 }


       monitorRowStatus OBJECT-TYPE
                       SYNTAX  RowStatus
                       MAX-ACCESS  read-write
                       STATUS  current
                       DESCRIPTION
                               "The status of this table entry.  
                                Create,Delete and Modify."
                  ::= { monitorEntry 13 }      


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

	mirmonNotificationVars  OBJECT IDENTIFIER ::= { alcatelIND1PortMirMonMIBObjects 3 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

MirMonErrorIds ::= TEXTUAL-CONVENTION
	STATUS 	current
	DESCRIPTION
		"This data type is used to define the different type of error
		occured while configuring Mirroring/Monitoring."
	SYNTAX INTEGER {
		other (1), 
		wrongSession (2), -- Wrong session given to NI.
		hwQError (3),     -- HW queue error on NI 
		swQError (4) 	  -- SW queue error on NI
		}

mirmonPrimarySlot OBJECT-TYPE
	        SYNTAX  INTEGER  (1..2147483647)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		        "Slot of mirrored or monitored interface."
           ::= { mirmonNotificationVars 1 }	

mirmonPrimaryPort OBJECT-TYPE
	        SYNTAX  INTEGER  (1..2147483647)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		        "Port of mirrored or monitored interface."
           ::= { mirmonNotificationVars 2 }	

mirroringSlot OBJECT-TYPE
	        SYNTAX  INTEGER  (1..2147483647)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		        "Slot of mirroring interface."
           ::= { mirmonNotificationVars 3 }	

mirroringPort OBJECT-TYPE
	        SYNTAX  INTEGER  (1..2147483647)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		        "Port of mirroring interface."
           ::= { mirmonNotificationVars 4 }	

mirMonSession	OBJECT-TYPE
	 SYNTAX  INTEGER  (1..2147483647)
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
	 	"The Mirroring session number."
	 ::= {mirmonNotificationVars 5 }

mirMonError OBJECT-TYPE
	SYNTAX	MirMonErrorIds
	MAX-ACCESS read-only
	STATUS	   current
	DESCRIPTION
		"The Error returned by the NI which failed to configure Mirroring/Monitoring"
	::= {mirmonNotificationVars  6 }

mirMonErrorNi OBJECT-TYPE
           SYNTAX  INTEGER  (1..2147483647)
           MAX-ACCESS  read-only
           STATUS  current
           DESCRIPTION
                 "The NI slot number. "
           ::= { mirmonNotificationVars 7 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
--  NOTIFICATIONS
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
mirrorConfigError NOTIFICATION-TYPE
	OBJECTS {
		mirmonPrimarySlot,
		mirmonPrimaryPort,
		mirroringSlot,
		mirroringPort,
		mirMonErrorNi, -- NI which reported the error.
		mirMonError    -- Error
		}
	STATUS current
	DESCRIPTION
		"The Mirroring Configuration failed on NI.
		This trap is sent when any NI fails to configure mirroring.			
		Due to this error, port mirroring session will be terminated."
	::= { portMirroringMonitoringTraps 0 1 }

monitorFileWritten NOTIFICATION-TYPE
       OBJECTS {
                       mirmonPrimarySlot,
                       mirmonPrimaryPort,
                       monitorFileName,
                       monitorFileSize
                       }
  STATUS current
               DESCRIPTION
                       "A File Written Trap is sent when the amount of data requested
                       by the user has been written by the port monitoring instance."
               ::= { portMirroringMonitoringTraps 0 2 }


mirrorUnlikeNi	NOTIFICATION-TYPE
	OBJECTS {
		mirmonPrimarySlot,
		mirmonPrimaryPort,
		mirroringSlot,
		mirroringPort,
		mirMonErrorNi  -- NI slot number where the Unlike NI is inserted.
		}
	STATUS current
	DESCRIPTION
		" The Mirroring Configuration is deleted due to the swapping of different 
		  NI board type. Port Mirroring session which was active on a slot,cannot 
		  continue with the insertion of different NI type in the same slot. "
	::= { portMirroringMonitoringTraps 0 3 }
	

	


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

	mirmonSFlowObjects  OBJECT IDENTIFIER ::= { alcatelIND1PortMirMonMIBObjects 4}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Flow Sampling Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      alasFlowFsTable OBJECT-TYPE
              SYNTAX      SEQUENCE OF AlaSFlowFsEntry
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                "A table of the flow samplers within a device."
              ::= { mirmonSFlowObjects 1 }

      alasFlowFsEntry OBJECT-TYPE
              SYNTAX      AlaSFlowFsEntry
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                "Attributes of a flow sampler."
    	      AUGMENTS  { sFlowFsEntry }
              ::= { alasFlowFsTable 1 }

      AlaSFlowFsEntry ::= SEQUENCE {
              alasFlowFsDeleteEntry      INTEGER
              }

      alasFlowFsDeleteEntry OBJECT-TYPE
          SYNTAX INTEGER   {
		  active(1),
		  notInService(2),
                  delete(6)
             }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
                  "The object is used to delete entries in the sFlowFsTable.
                  Only value 6 is supported."
          ::= { alasFlowFsEntry 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Counter Polling Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      alasFlowCpTable OBJECT-TYPE
              SYNTAX      SEQUENCE OF AlaSFlowCpEntry
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                "A table of the flow samplers within a device."
              ::= { mirmonSFlowObjects 2 }

      alasFlowCpEntry OBJECT-TYPE
              SYNTAX      AlaSFlowCpEntry
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                "Attributes of a flow sampler."
    	      AUGMENTS  { sFlowCpEntry }
              ::= { alasFlowCpTable 1 }

      AlaSFlowCpEntry ::= SEQUENCE {
              alasFlowCpDeleteEntry      INTEGER
              }

      alasFlowCpDeleteEntry OBJECT-TYPE
      	  SYNTAX INTEGER   {
		active(1),
		notInService(2),
                  delete(6)
             }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
                  "The object is used to delete entries in the sFlowCpTable.
                   Only value 6 is supported."
          ::= { alasFlowCpEntry 1 } 
  
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
--  Agent IP Information
--  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 
       alasFlowAgentConfigType OBJECT-TYPE    
           SYNTAX      INTEGER {
                      default(1),
                      user(2)
                 }   
           MAX-ACCESS read-write    
           STATUS       obsolete 
           DESCRIPTION    
                  "The Agent Config Information    
                   1 -- Default    
                   2 -- sFlow Interface IP Specified by User
		   This object has been obsoleted. Use the alaIpManagedIntfEntry objects
		   in AlcatelIND1Ip.mib"
           DEFVAL        { default }    
          ::= {  mirmonSFlowObjects 3}  
 
       alasFlowAgentAddressType OBJECT-TYPE
               SYNTAX      InetAddressType
               MAX-ACCESS  read-write
               STATUS      obsolete 
               DESCRIPTION
                 "The address type of the address associated with this agent.
                  Only ipv4 and ipv6 types are supported.
		  This object has been obsoleted. Use the alaIpManagedIntfEntry objects
		  in AlcatelIND1Ip.mib"
               ::= { mirmonSFlowObjects 4}
 
       alasFlowAgentAddress OBJECT-TYPE   
           SYNTAX InetAddress   
           MAX-ACCESS  read-write   
           STATUS      obsolete 
           DESCRIPTION   
                 "The IP address associated with this agent. In the case of a   
                  multi-homed agent, this should be the loopback address of the   
                  agent. The sFlowAgent address must provide SNMP connectivity   
                  to the agent. The address should be an invariant that does not   
                  change as interfaces are reconfigured, enabled, disabled,   
                  added or removed. A manager should be able to use the   
                  sFlowAgentAddress as a unique key that will identify this   
                  agent over extended periods of time so that a history can   
                  be maintained.
		  This object has been obsoleted. Use the alaIpManagedIntfEntry objects
		  in AlcatelIND1Ip.mib"   
           ::= { mirmonSFlowObjects 5 }   
          

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    alcatelIND1PortMirMonMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for
             Port Mirroring and Monitoring."
        MODULE
            MANDATORY-GROUPS
            {
                portMirroringGroup,
                portMonitoringGroup,
                portNotificationVarsGroup 
            }

        ::= { alcatelIND1PortMirMonMIBCompliances 1 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    portMirroringGroup OBJECT-GROUP
        OBJECTS
        {
	                mirrorSessionNumber,     -- port mirroring table
	                mirrorMirroredIfindex,
	                mirrorMirroringIfindex,
	                mirrorStatus,
	                mirrorUnblockedVLAN,
	                mirrorRowStatus,
	                mirrorDirection,
			mirrorSessOperStatus,
			mirrorSrcMirroredIf, -- port mirroring source interfaces table
			mirrorSrcStatus,
			mirrorSrcDirection,
			mirrorSrcRowStatus,
			mirrorSrcOperStatus
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for management of Port Mirroring."
        ::= { alcatelIND1PortMirMonMIBGroups 1 }

   portMonitoringGroup OBJECT-GROUP
        OBJECTS
        {
                        monitorSessionNumber,     -- port monitoring table
                        monitorIfindex,
                        monitorFileStatus,
                        monitorFileName,
                        monitorFileSize,
                        monitorScreenStatus,
                        monitorScreenLine,
                        monitorTrafficType,
                        monitorStatus,
                        monitorFileOverWrite,
                        monitorDirection ,
                        monitorTimeout ,
                        monitorRowStatus
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for management of Port Monitoring."
        ::= { alcatelIND1PortMirMonMIBGroups 2 }
                        

    portNotificationVarsGroup OBJECT-GROUP
        OBJECTS
        {
                       mirmonPrimarySlot,
                       mirmonPrimaryPort,
                       mirroringSlot,
                       mirroringPort,
		       mirMonSession,
		       mirMonError,
		       mirMonErrorNi
	}
        STATUS  current
        DESCRIPTION
            "Collection of objects which appear only in notifications."
        ::= { alcatelIND1PortMirMonMIBGroups 3 }
		 

    mirmonTrapsGroup NOTIFICATION-GROUP
	NOTIFICATIONS {
  	    mirrorConfigError,
	    mirrorUnlikeNi
	}
        STATUS  current
        DESCRIPTION
            "Collection of Traps for port mirroring and monitoring."
        ::= { alcatelIND1PortMirMonMIBGroups 4 }


	END