path: root/MIBS/nokia/ALCATEL-IND1-MVRP-MIB

ALCATEL-IND1-MVRP-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		Counter32, MODULE-IDENTITY, 
		OBJECT-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32 
							FROM SNMPv2-SMI
                VlanId                  FROM Q-BRIDGE-MIB
		InterfaceIndex		FROM IF-MIB
		MODULE-COMPLIANCE, OBJECT-GROUP
							FROM SNMPv2-CONF
		softentIND1Mvrp		FROM ALCATEL-IND1-BASE
                MacAddress		FROM SNMPv2-TC
		EnabledStatus		FROM P-BRIDGE-MIB
		TEXTUAL-CONVENTION 	FROM SNMPv2-TC;


	alcatelIND1MVRPMIB MODULE-IDENTITY
		LAST-UPDATED "200908070000Z"
		ORGANIZATION "Alcatel-Lucent"
		CONTACT-INFO
			"Please consult with Customer Service to insure the most appropriate
			version of this document is used with the products in question:

			Alcatel-Lucent, Enterprise Solutions Division
			(Formerly Alcatel Internetworking, Incorporated)
			26801 West Agoura Road
			Agoura Hills, CA  91301-5122
			United States Of America

			Telephone:				North America  +1 800 995 2696
								Latin America  +1 877 919 9526
								Europe         +31 23 556 0100
								Asia           +65 394 7933
								All Other      +1 818 878 4507

			Electronic Mail:		support@ind.alcatel.com
			World Wide Web:			http://alcatel-lucent.com/wps/portal/enterprise
			File Transfer Protocol:	ftp://ftp.ind.alcatel.com/pub/products/mibs"

		DESCRIPTION
			"This module describes an authoritative enterprise-specific Simple
			Network Management Protocol (SNMP) Management Information Base (MIB):

			For the Birds Of Prey Product Line
			MVRP for the distribution of VLAN configuration information.

			The right to make changes in specification and other information
			contained in this document without prior notice is reserved.

			No liability shall be assumed for any incidental, indirect, special, or
			consequential damages whatsoever arising from or related to this
			document or the information contained herein.

			Vendors, end-users, and other interested parties are granted
			non-exclusive license to use this specification in connection with
			management of the products for which it is intended to be used.

			Copyright (C) 1995-2009 Alcatel-Lucent, Incorporated
			ALL RIGHTS RESERVED WORLDWIDE"

		REVISION	"200908070000Z"

		DESCRIPTION
			"The MVRP MIB defines a set of MVRP related management objects for VLANs 
			and ports that support Multiple VLAN Registration Protocol (MVRP). MVRP as a 
			protocol provides mechanisms to dynamically learn and further propagate VLAN 
			membership information across a bridged network, as recommended in standards 
			IEEE Std. 802.1ak-2007, which is an amendment to IEEE Std 802.1Q-2005 Edition. 
	
			This MVRP MIB extends already existing IETF_Q_BRIDGE MIB which is based on 
			RFC 2674 (Bridges with Traffic Classes, Multicast Filtering and Virtual LAN 
			Extensions), to accomodate the proprietary behavior of the device and for 
			defining objects as recommended by standards. 

			This MIB comprises proprietary managed objects as well the objects required 
			for conforming to the standards. However, the set of objects defined in this MIB, 
			do not duplicate, nor conflict with any MIB object definitions defined in the 
			IETF_Q_BRIDGE_MIB."
		::= { softentIND1Mvrp 1}

----------------------------------------------------------------
	alaMvrpEvents OBJECT IDENTIFIER ::= { alcatelIND1MVRPMIB 0 }
 
	alcatelIND1MVRPMIBObjects OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION
			"Branch For MVRP Subsystem Managed Objects."
		::= { alcatelIND1MVRPMIB 1 }

	alcatelIND1MVRPMIBConformance OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION
			"Branch for MVRP Module MIB Subsystem Conformance Information."
		::= { alcatelIND1MVRPMIB 2 }

	alcatelIND1MVRPMIBGroups OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION
			"Branch for MVRP Module MIB Subsystem Units of Conformance."
		::= { alcatelIND1MVRPMIBConformance 1 }

	alcatelIND1MVRPMIBCompliances OBJECT-IDENTITY
		STATUS	current
		DESCRIPTION
			"Branch for MVRP Module MIB Subsystem Compliance Statements."
		::= { alcatelIND1MVRPMIBConformance 2 }

-- textual conventions
MvrpPortVlanRestrictBitmap  ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
            "The bitmap that includes the status value for different type of restrictions that could be 
            applied for a port VLAN combination.
            Each bit in the bitmap corresponds to the status of the restriction applied for a VLAN on a port.

            Having the bit 'noRestriction(0)' set indicates that the no restriction is applied for the VLAN 
            on the port. No other option can be applied along with this option.

            Having the bit 'restrictRegistration(1)' set indicates that the VLAN is restricted from 
            getting registered on the port.

            Having the bit 'restrictAdvertisement(2)' set indicates that the advertisement for the 
            VLAN is restricted on the port.

            Having the bit 'restrictStaticVlanRegistration(3)' set indicates that the registration 
            on a port for a static VLAN is restricted."

    SYNTAX  BITS {
            	noRestriction(0),
            	restrictRegistration(1),
            	restrictAdvertisement(2),
            	restrictStaticVlanRegistration(3)
            }

----------------------------------------------------------------
       
----------------------------------------------------------------
--MVRP MIB
----------------------------------------------------------------

	alaMvrpGlobalStatus OBJECT-TYPE
	SYNTAX      EnabledStatus
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"The administrative global status requested by management for
		MVRP.  The value enabled(1) indicates that MVRP should
		be enabled on this device.  When disabled(2), MVRP
		is disabled in the system and all MVRP packets will be
		forwarded transparently if transparent switching status is 
		also enabled.  This object affects all MVRP Applicant and Registrar 
		state machines.  A transition from disabled(2) to enabled(1) will cause a reset of all
		MVRP state machines on all ports."
	DEFVAL      { disabled }
	::= { alcatelIND1MVRPMIBObjects 1 }
		
	alaMvrpGlobalClearStats OBJECT-TYPE
		SYNTAX	INTEGER 
				{
					default(0),
					reset(1)
				}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Defines the global clear statistics control for MVRP.  
			The value reset (1) indicates that MVRP should clear all statistic 
			counters related to all ports in the system. By default, this object
			contains a zero value."
		DEFVAL	{ default }
	::= { alcatelIND1MVRPMIBObjects 2 }

	alaMvrpTransparentSwitching OBJECT-TYPE
		SYNTAX      EnabledStatus
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Defines the behavior when MVRP is globally disabled on a device.			
			The value enabled (1) indicates that device behaves like a MVRP 
			transparent device and the MVRP frames will be flooded transparently.
			Value disabled (2) disabled indicates that the device will not flood 
			MVRP frames and will simply discard the received MVRP frames."
		DEFVAL	{ disabled }
	::= { alcatelIND1MVRPMIBObjects 3 }
		
	alaMvrpMaxVlanLimit OBJECT-TYPE
		SYNTAX	Integer32 (32 .. 4094)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Defines the maximum number of dynamic VLANs that can be created on the system by MVRP. 
			If the number of VLANs created by MVRP reaches this limit, the system will prevent 
			MVRP from creating additional VLANs."
		DEFVAL	{ 256 }
	::= { alcatelIND1MVRPMIBObjects 4 }

	alaMvrpVlanConflictInfo OBJECT-TYPE
		SYNTAX	OCTET STRING (SIZE(0 .. 100))
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"MVRP has received registration for Vlan which is configured for End To End Flow Control.
			Notify the Management with the Port in which the MVRP PDU was recieved and the Vlan."
	::= { alcatelIND1MVRPMIBObjects 5 }

	alaVlanRegistrationProtocolType OBJECT-TYPE
		SYNTAX	INTEGER
				{
					gvrp(0),
					mvrp(1)
				}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Defines which VLAN registration mode is running in the system."
		DEFVAL	{ mvrp }
	::= { alcatelIND1MVRPMIBObjects 6 }
	                                                             
----------------------------------------------------------------
--	NOTIFICATIONS (TRAPS)
--	These notifications will be sent to the management entity
--	whenever dynamically learnt vlans by mvrp across system reaches the defined limit
--	and when dynamically learnt vlans by mvrp at each NI reaches a defined limit.
----------------------------------------------------------------
 
	alaMvrpVlanLimitReachedEvent NOTIFICATION-TYPE
		OBJECTS	
			{
				alaMvrpMaxVlanLimit
			}
		STATUS	current
		DESCRIPTION
			"The number of vlans learnt dynamically by MVRP has
			reached a configured limit. Notify the management
			entity with number of vlans learnt dynamically by
			MVRP and the configured MVRP vlan limit."
	::= { alaMvrpEvents 1 }

	alaMvrpE2eVlanConflict NOTIFICATION-TYPE
		OBJECTS	
			{
				alaMvrpVlanConflictInfo
			}
		STATUS	current
		DESCRIPTION
			"MVRP has recieved a registration for Vlan which is configured for End To End Flow Control.
			Notify the Management with the Port in which the MVRP PDU was recieved and the Vlan."
	::= { alaMvrpEvents 2 }
	 
---------------------------------------------------------------
--MVRP Port Config Table
---------------------------------------------------------------
        
--	DESCRIPTION:
--	"Port configuration information
--	data for the MVRP Module.
--	Implementation of this group is mandantory"


	alaMvrpPortConfig OBJECT IDENTIFIER ::= { alcatelIND1MVRPMIBObjects 7 }
       
	
	alaMvrpPortConfigTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF AlaMvrpPortConfigEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A table containing MVRP port configuration information."
	::= { alaMvrpPortConfig 1 }
            
	alaMvrpPortConfigEntry OBJECT-TYPE
		SYNTAX	AlaMvrpPortConfigEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A MVRP port configuration entry."
		INDEX { alaMvrpPortConfigIfIndex }
	::= { alaMvrpPortConfigTable 1 }

	AlaMvrpPortConfigEntry ::= SEQUENCE {
		alaMvrpPortConfigIfIndex				InterfaceIndex,
		alaMvrpPortStatus					EnabledStatus,
		alaMvrpPortConfigRegistrarMode				INTEGER,
		alaMvrpPortConfigApplicantMode				INTEGER,
		alaMvrpPortConfigJoinTimer				Integer32,
		alaMvrpPortConfigLeaveTimer				Integer32,
		alaMvrpPortConfigLeaveAllTimer				Integer32,
		alaMvrpPortConfigPeriodicTimer				Integer32,
		alaMvrpPortConfigPeriodicTransmissionStatus		EnabledStatus
	}	    

	alaMvrpPortConfigIfIndex OBJECT-TYPE
		SYNTAX	InterfaceIndex
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The ifindex of the port on which MVRP is running"
	::= { alaMvrpPortConfigEntry 1 }
	    
	alaMvrpPortStatus OBJECT-TYPE
		SYNTAX		EnabledStatus
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"The state of MVRP operation on this port.  The value
			enabled(1) indicates that MVRP is enabled on this port.
			When disabled(2), MVRP is disabled on this port.
			Any MVRP packets received will be silently discarded on 
			this port and no MVRP registrations will be propagated from 
			this port. This object affects all MVRP Applicant and
			Registrar state machines on this port.  A transition
			from disabled(2) to enabled(1) will cause a reset of all
			MVRP state machines on this port."
		DEFVAL	{ disabled }
	::= { alaMvrpPortConfigEntry 2 }

	alaMvrpPortConfigRegistrarMode OBJECT-TYPE
		SYNTAX	INTEGER
				{
					normal(1),
					fixed(2),
					forbidden(3)                             
				}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Defines the mode of operation of all the registrar state machines associated to the port.
			normal - registration as well as de-registration of VLANs are allowed. 
			fixed  - A VLAN that was previously mapped onto such a port either dynamically or statically 
			cannot be de-registered through MVRP. When the port registration mode is set to fixed, 
			VLAN(s) can only be mapped onto such port statically.
			forbidden - dynamic VLAN registration or de-registration are not allowed on the port. 
		
			NOTE: The registrar state machines for the default VLAN will operate in Fixed Registration Mode 
			for all the ports on the switch."
		DEFVAL	{ normal }
	::= { alaMvrpPortConfigEntry 3 }
	    
	    
	alaMvrpPortConfigApplicantMode OBJECT-TYPE
		SYNTAX	INTEGER
				{
					participant (1),
					nonparticipant (2),
					active (3)
				}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Defines the mode of operation of all the applicant state machines associated to the port.
			participant - The state machines participates normally  in MVRP protocol exchanges.
			nonparticipant - The state machines does not send any MVRP PDU(s).
			active - The state machines send MVRP frames even on ports that are in blocking state on 
			the active spanning tree instance."
		DEFVAL	{ active }
	::= { alaMvrpPortConfigEntry 4 }
	    
	    
	alaMvrpPortConfigJoinTimer OBJECT-TYPE
		SYNTAX	Integer32 (250 .. 2147483647) 
		UNITS	"milliseconds"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Maximum period of time that a MVRP instance waits before making declarations for VLANs."
		DEFVAL  { 600 }
	::= { alaMvrpPortConfigEntry 5 }
  
	alaMvrpPortConfigLeaveTimer OBJECT-TYPE
		SYNTAX	Integer32 (750 .. 2147483647) 
		UNITS	"milliseconds"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Period of time that a registrar state machine of a MVRP instance waits, after receiving 
			a leave message on a port for a particular VLAN, to remove the registration of that VLAN 
			on the port.
			The value for the Leave Timer must be greater than twice the value for the Join timer, 
			plus six times the timer resolution."
		DEFVAL  { 1800 }
	::= { alaMvrpPortConfigEntry 6 }
		
	alaMvrpPortConfigLeaveAllTimer OBJECT-TYPE
		SYNTAX	Integer32 (750 .. 2147483647) 
		UNITS	"milliseconds"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Interval at which the Leave All state machine of a MVRP instance generates Leave All 
			messages. A Leave All message instructs MVRP to modify the state of all VLANs registered 
			on a port to Leaving.
			The value for the LeaveAll Timer must be greater than the value for the Leave
			timer."		
		DEFVAL	{ 30000  }
	::= { alaMvrpPortConfigEntry 7 }

	alaMvrpPortConfigPeriodicTimer OBJECT-TYPE
		SYNTAX	Integer32 (1 .. 2147483647) 
		UNITS	"seconds"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Interval at which the Periodic transmission state machine of a MVRP instance generates 
			transmission opportunities for the MVRP instance."		
		DEFVAL	{ 1 }
	::= { alaMvrpPortConfigEntry 8 }
	   
	alaMvrpPortConfigPeriodicTransmissionStatus OBJECT-TYPE
		SYNTAX      EnabledStatus
		MAX-ACCESS	read-write
		STATUS		current	
		DESCRIPTION
			"Used to enable or disable the Periodic transmission state machine of a MVRP instance."
		DEFVAL	{ enabled }
	::= { alaMvrpPortConfigEntry 9 }

---------------------------------------------------------------

---------------------------------------------------------------
--MVRP Port Statistics Table
---------------------------------------------------------------
        
--	DESCRIPTION:
--	"Port statistics information
--	for the MVRP Module.
--	Implementation of this group is mandantory"

	alaMvrpPortStats OBJECT IDENTIFIER ::= { alcatelIND1MVRPMIBObjects 8 }


	alaMvrpPortStatsTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF AlaMvrpPortStatsEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A table containing MVRP port statistics information."
	::= { alaMvrpPortStats 1 }

	alaMvrpPortStatsEntry OBJECT-TYPE
		SYNTAX  AlaMvrpPortStatsEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A MVRP port statistics entry."
		INDEX { alaMvrpPortStatsIfIndex }
	::= { alaMvrpPortStatsTable 1 }

	AlaMvrpPortStatsEntry ::= SEQUENCE {    
		alaMvrpPortStatsIfIndex			InterfaceIndex,
		alaMvrpPortStatsNewReceived		Counter32,
		alaMvrpPortStatsJoinInReceived		Counter32,
		alaMvrpPortStatsJoinEmptyReceived	Counter32,
		alaMvrpPortStatsLeaveReceived		Counter32,
		alaMvrpPortStatsInReceived		Counter32,
		alaMvrpPortStatsEmptyReceived		Counter32,
		alaMvrpPortStatsLeaveAllReceived	Counter32,
		alaMvrpPortStatsNewTransmitted		Counter32,
		alaMvrpPortStatsJoinInTransmitted	Counter32,
		alaMvrpPortStatsJoinEmptyTransmitted	Counter32,
		alaMvrpPortStatsLeaveTransmitted	Counter32,
		alaMvrpPortStatsInTransmitted		Counter32,
		alaMvrpPortStatsEmptyTransmitted	Counter32,
		alaMvrpPortStatsLeaveAllTransmitted	Counter32,
		alaMvrpPortStatsTotalPDUReceived	Counter32,
		alaMvrpPortStatsTotalPDUTransmitted	Counter32,
		alaMvrpPortStatsTotalMsgsReceived	Counter32,
		alaMvrpPortStatsTotalMsgsTransmitted	Counter32,		
		alaMvrpPortStatsInvalidMsgsReceived	Counter32,
		alaMvrpPortFailedRegistrations		Counter32,
		alaMvrpPortLastPduOrigin		MacAddress,
		alaMvrpPortStatsClearStats		INTEGER
	}                                      
	    
	alaMvrpPortStatsIfIndex OBJECT-TYPE
		SYNTAX	InterfaceIndex
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The ifindex of the port on which MVRP is running"
	::= { alaMvrpPortStatsEntry 1 } 
	    
	alaMvrpPortStatsNewReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of New messages received."
	::= { alaMvrpPortStatsEntry 2}

	alaMvrpPortStatsJoinInReceived OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS		current
		DESCRIPTION
			"The number of Join In messages received."
	::= { alaMvrpPortStatsEntry 3}
	
	alaMvrpPortStatsJoinEmptyReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Join Empty messages received."
	::= { alaMvrpPortStatsEntry 4}

	alaMvrpPortStatsLeaveReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Leave messages received."
	::= { alaMvrpPortStatsEntry 5}
	
	alaMvrpPortStatsInReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of In messages received."
	::= { alaMvrpPortStatsEntry 6}
	
	alaMvrpPortStatsEmptyReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Empty messages received."
	::= { alaMvrpPortStatsEntry 7}

	alaMvrpPortStatsLeaveAllReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Leave all messages received."
	::= { alaMvrpPortStatsEntry 8}
            
	alaMvrpPortStatsNewTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of New messages transmitted."
	::= { alaMvrpPortStatsEntry 9}

	alaMvrpPortStatsJoinInTransmitted OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS		current
		DESCRIPTION
			"The number of Join In messages transmitted."
	::= { alaMvrpPortStatsEntry 10}
	
	alaMvrpPortStatsJoinEmptyTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Join Empty messages transmitted."
	::= { alaMvrpPortStatsEntry 11}

	alaMvrpPortStatsLeaveTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Leave messages transmitted."
	::= { alaMvrpPortStatsEntry 12}
	
	alaMvrpPortStatsInTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of In messages transmitted."
	::= { alaMvrpPortStatsEntry 13}
	
	alaMvrpPortStatsEmptyTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Empty messages transmitted."
	::= { alaMvrpPortStatsEntry 14}

	alaMvrpPortStatsLeaveAllTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Leave all messages transmitted."
	::= { alaMvrpPortStatsEntry 15}
  
	alaMvrpPortStatsTotalPDUReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The total number of MVRP PDUs received."
	::= { alaMvrpPortStatsEntry 16}
            
	alaMvrpPortStatsTotalPDUTransmitted	OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The total number of MVRP PDUs transmitted."
	::= { alaMvrpPortStatsEntry 17}
            	                                      
	alaMvrpPortStatsTotalMsgsReceived OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The total number of MVRP messages received."
	::= { alaMvrpPortStatsEntry 18}
            
	alaMvrpPortStatsTotalMsgsTransmitted OBJECT-TYPE
		SYNTAX	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The total number of MVRP messages transmitted."
	::= { alaMvrpPortStatsEntry 19}

	alaMvrpPortStatsInvalidMsgsReceived OBJECT-TYPE
		SYNTAX  	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The number of Invalid messages received."
	::= { alaMvrpPortStatsEntry 20}

	alaMvrpPortFailedRegistrations OBJECT-TYPE
		SYNTAX  	Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The total number of failed GVRP registrations, 
			for any reason, on this port."
	::= { alaMvrpPortStatsEntry 21}
            	     	  
	alaMvrpPortLastPduOrigin OBJECT-TYPE
		SYNTAX  	MacAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION
			"The Source MAC Address of the last GVRP message
			received on this port."
	::= { alaMvrpPortStatsEntry 22}

	alaMvrpPortStatsClearStats OBJECT-TYPE
		SYNTAX	INTEGER
				{
					default(0),
					reset(1)
				}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"Reset all statistics parameters corresponding to this port.
			By default, this objects contains a zero value."
		DEFVAL  { default }
	::= { alaMvrpPortStatsEntry 23}   

---------------------------------------------------------------
--MVRP Port Restrict VLAN Config Table
---------------------------------------------------------------
        
--	DESCRIPTION:
--	"Port Restrict VLAN configuration information
--	data for the MVRP Module.
--	Implementation of this group is mandantory"


	alaMvrpPortRestrictVlanConfig OBJECT IDENTIFIER ::= { alcatelIND1MVRPMIBObjects 9 }

	alaMvrpPortRestrictVlanConfigTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF AlaMvrpPortRestrictVlanConfigEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A table containing MVRP port restrict VLAN configuration information."
	::= { alaMvrpPortRestrictVlanConfig 1 }
            
	alaMvrpPortRestrictVlanConfigEntry OBJECT-TYPE
		SYNTAX	AlaMvrpPortRestrictVlanConfigEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"A MVRP port restrict VLAN configuration entry."
		INDEX { alaMvrpPortRestrictVlanIfIndex, alaMvrpPortRestrictVlanID}
	::= { alaMvrpPortRestrictVlanConfigTable 1 }

	AlaMvrpPortRestrictVlanConfigEntry ::= SEQUENCE {
		alaMvrpPortRestrictVlanIfIndex		InterfaceIndex,
		alaMvrpPortRestrictVlanID		VlanId,
		alaMvrpPortVlanRestrictions		MvrpPortVlanRestrictBitmap
	}

	alaMvrpPortRestrictVlanIfIndex OBJECT-TYPE
		SYNTAX		InterfaceIndex
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"The ifindex of the port on which MVRP is running"
	::= { alaMvrpPortRestrictVlanConfigEntry 1 }
	    
	alaMvrpPortRestrictVlanID OBJECT-TYPE
		SYNTAX		VlanId
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"An integer indicating VLAN-ID."
	::= { alaMvrpPortRestrictVlanConfigEntry 2 }
	    
	 alaMvrpPortVlanRestrictions OBJECT-TYPE
		SYNTAX		MvrpPortVlanRestrictBitmap
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
                       "The bitmap includes the status value for different type of restrictions that could be 
                        applied for a port VLAN combination. Each bit in the bitmap corresponds to the status 
                        of a particular restriction applied for a VLAN on the port. 
                        If the bit is set, the particular restriction is enabled for the VLAN port combination.

                        Having the bit 'noRestriction(0)' set indicates that the no restriction is applied for 
                        the VLAN on the port. No other option can be applied along with this option.

                        Having the bit 'restrictRegistration(1)' set indicates that the VLAN is restricted from 
                        getting registered on the port.

                        Having the bit 'restrictAdvertisement(2)' set indicates that the advertisement for the 
                        VLAN is restricted on the port.

                        Having the bit 'restrictStaticVlanRegistration(3)' set indicates that the registration 
                        on a port for a static VLAN is restricted."
		DEFVAL  { {noRestriction} }
	::= { alaMvrpPortRestrictVlanConfigEntry 3 }

----------------------------------------------------------------
 
---------------------------------------------------------------
--COMPLIANCE
---------------------------------------------------------------

	alcatelIND1MVRPMIBCompliance MODULE-COMPLIANCE
		STATUS	current
		DESCRIPTION
			"Compliance statement for MVRP."
		MODULE
		MANDATORY-GROUPS
			{
				alaMvrpBaseGroup,
				alaMvrpPortConfigGroup,
				alaMvrpPortStatsGroup,
				alaMvrpPortRestrictVlanConfigGroup
			}
	::= { alcatelIND1MVRPMIBCompliances 1 }

---------------------------------------------------------------
--UNITS OF CONFORMANCE
---------------------------------------------------------------

	alaMvrpBaseGroup OBJECT-GROUP
		OBJECTS
			{
				alaMvrpGlobalStatus,
				alaMvrpGlobalClearStats,
				alaMvrpTransparentSwitching,
				alaMvrpMaxVlanLimit,
				alaMvrpVlanConflictInfo,
				alaVlanRegistrationProtocolType
			}   
		STATUS	current
		DESCRIPTION
			"Collection of objects for management of MVRP Base Group."
	::= { alcatelIND1MVRPMIBGroups 1 }

	alaMvrpPortConfigGroup OBJECT-GROUP
		OBJECTS
			{
				alaMvrpPortStatus,
				alaMvrpPortConfigRegistrarMode,
				alaMvrpPortConfigApplicantMode,
				alaMvrpPortConfigJoinTimer,
				alaMvrpPortConfigLeaveTimer,
				alaMvrpPortConfigLeaveAllTimer,
				alaMvrpPortConfigPeriodicTimer,
				alaMvrpPortConfigPeriodicTransmissionStatus
			}
		STATUS	current
		DESCRIPTION
			"Collection of objects for management of MVRP Port Configuration Table."
	::= { alcatelIND1MVRPMIBGroups 2 }

	alaMvrpPortStatsGroup OBJECT-GROUP
		OBJECTS
			{
				alaMvrpPortStatsNewReceived,
				alaMvrpPortStatsJoinInReceived,
				alaMvrpPortStatsJoinEmptyReceived,
				alaMvrpPortStatsLeaveReceived,
				alaMvrpPortStatsInReceived,
				alaMvrpPortStatsEmptyReceived,
				alaMvrpPortStatsLeaveAllReceived,
				alaMvrpPortStatsNewTransmitted,
				alaMvrpPortStatsJoinInTransmitted,
				alaMvrpPortStatsJoinEmptyTransmitted,
				alaMvrpPortStatsLeaveTransmitted,
				alaMvrpPortStatsInTransmitted,
				alaMvrpPortStatsEmptyTransmitted,
				alaMvrpPortStatsLeaveAllTransmitted,
				alaMvrpPortStatsTotalPDUReceived,
				alaMvrpPortStatsTotalPDUTransmitted,
				alaMvrpPortStatsTotalMsgsReceived,
				alaMvrpPortStatsTotalMsgsTransmitted,		
				alaMvrpPortStatsInvalidMsgsReceived,
				alaMvrpPortFailedRegistrations,
				alaMvrpPortLastPduOrigin,
				alaMvrpPortStatsClearStats
			}			
		STATUS	current
		DESCRIPTION
			"Collection of objects for management of MVRP Statistics Table."
	::= { alcatelIND1MVRPMIBGroups 3 }

	alaMvrpPortRestrictVlanConfigGroup OBJECT-GROUP
		OBJECTS
			{
				alaMvrpPortVlanRestrictions
			}
		STATUS	current
		DESCRIPTION
			"Collection of objects for management of MVRP Port Restrict VLAN Configuration Table."
	::= { alcatelIND1MVRPMIBGroups 4 }

--------------------------------------------------------------- 

END