path: root/MIBS/nokia/ALCATEL-IND1-IPM-VLAN-MIB

ALCATEL-IND1-IPM-VLAN-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                MODULE-IDENTITY, 
                OBJECT-IDENTITY,
		OBJECT-TYPE  			FROM SNMPv2-SMI
		OBJECT-GROUP,
                MODULE-COMPLIANCE	        FROM SNMPv2-CONF
		softentIND1IPMVlanMgt 		FROM ALCATEL-IND1-BASE
                RowStatus 			FROM SNMPv2-TC
		InterfaceIndex 			FROM IF-MIB
		InetAddressType,
		InetAddress,	
                InetAddressPrefixLength		FROM INET-ADDRESS-MIB
		;

        alcatelIND1IPMVlanMIB MODULE-IDENTITY
		LAST-UPDATED "200707020000Z"
		ORGANIZATION "ALCATEL - Architects Of An Internet World"
		CONTACT-INFO
                "Please consult with Customer Service to insure the most appropriate
                version of this document is used with the products in question:

                  Alcatel-Lucent, Enterprise Solutions Division
                 (Formerly Alcatel Internetworking, Incorporated)
                26801 West Agoura Road Agoura Hills, CA  91301-5122
			      		           United States Of America
	
                Telephone:	North America	+1 800 995 2696
				                    Latin America 	+1 877 919 9526
                                Europe		+31 23 556 0100
                                Asia		+65 394 7933
                                All Other	+1 818 878 4507
	
                Electronic Mail:	support@ind.alcatel.com
                World Wide Web:		http://alcatel-lucent.com/wps/portal/enterprise
                File Transfer Protocol:	ftp://ftp.ind.alcatel.com/pub/products/mibs"
                DESCRIPTION
                "The parameters for configuration of the IPM Vlan feature, 
                including the association between ports and ipaddresses with vlans.

                The right to make changes in specification and other information
                contained in this document without prior notice is reserved.

                No liability shall be assumed for any incidental, indirect, special, or
                consequential damages whatsoever arising from or related to this 
                document or the information contained herein.

                Vendors, end-users, and other interested parties are granted
                non-exclusive license to use this specification in connection with 
                management of the products for which it is intended to be used.

                Copyright ¨ 1995-2007 Alcatel-Lucent
	        ALL RIGHTS RESERVED WORLDWIDE"
			::= { softentIND1IPMVlanMgt 1}

alcatelIND1IPMVlanMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For IPM Vlan Managed Objects."
     	::= { alcatelIND1IPMVlanMIB 1 }

alcatelIND1IPMVlanMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For IPM Vlan Conformance Information."
    	::= { alcatelIND1IPMVlanMIB 2 }

alcatelIND1IPMVlanMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For IPM Vlan Units Of Conformance."
     	::= { alcatelIND1IPMVlanMIBConformance 1 }

alcatelIND1IPMVlanMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For IPM Vlan Compliance Statements."
    	 ::= { alcatelIND1IPMVlanMIBConformance 2 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The IPM Vlan Port Table 

     alaipmvVlanPort OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


alaipmvVlanPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF AlaIpmvVlanPortEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"A table that contains port specific information for the IP 
	Multicast VLAN. An entry is this table is created when a port 
	is configured as a receiver / sender port for a IPMVLAN."
	::= { alaipmvVlanPort 1 }
	
alaipmvVlanPortEntry OBJECT-TYPE
	SYNTAX AlaIpmvVlanPortEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"A IPMV Port entry."
	INDEX { alaipmvVlanPortIPMVlanNumber, alaipmvVlanPortNumber, alaipmvVlanPortType}
	::= { alaipmvVlanPortTable 1 }
	
AlaIpmvVlanPortEntry ::= SEQUENCE 
	{
		alaipmvVlanPortIPMVlanNumber INTEGER,
		alaipmvVlanPortNumber InterfaceIndex,
		alaipmvVlanPortType INTEGER,
		alaipmvVlanPortRowStatus RowStatus
	}

alaipmvVlanPortIPMVlanNumber OBJECT-TYPE
	SYNTAX INTEGER (2..4094)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The VLAN number component of this IPMVLAN instance. Valid range
	 from 2 to 4094."
	::= { alaipmvVlanPortEntry 1 }
	
	alaipmvVlanPortNumber OBJECT-TYPE
	SYNTAX InterfaceIndex 
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The port ifindex of the port which is associated to the IPMVLAN."
	::= { alaipmvVlanPortEntry 2 }

	alaipmvVlanPortType OBJECT-TYPE
	SYNTAX INTEGER
	{
		receiverPort(1),
		senderPort(2)
	}
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The type of this port associated to the IPMVLAN. receiverPort(1)
	 is the receiver port associated to the IPMVLAN, senderPort(2) is
	 the sender port associated to the IPMVLAN. In the VLAN Stacking
	 environment, these ports are the VLAN Stacking ports.
         Configuration of IPMVLAN logical/physical receiver port on 
         multiple IPMVlans, that are associated with same IPv4/IPv6 
         multicast group addresses are not allowed."
	::= { alaipmvVlanPortEntry 3 }
	
	alaipmvVlanPortRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"The status of this table entry. The values supported are CreateAndGo(4)
	 and destroy(6), to create or delete the port as a receiver / sender port
	 in an IPMVLAN. Of course the corresponding vlan and port must exist."
	::= { alaipmvVlanPortEntry 4 }
		

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The IPM Vlan ipmvlan/ipaddress association Table 

    alaipmvVlanIpAddr OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 2 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


alaipmvVlanIpAddrTable OBJECT-TYPE
	SYNTAX SEQUENCE OF AlaIpmvVlanIpAddrEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"A list of IP addresses assigned to an IPMVLAN."
	::= { alaipmvVlanIpAddr 1 }

alaipmvVlanIpAddrEntry OBJECT-TYPE
	SYNTAX AlaIpmvVlanIpAddrEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
	"A IPMVLAN IP address entry."
	INDEX { alaipmvVlanIpAddrVlanNumber, alaipmvVlanIpAddrType ,alaipmvVlanIpAddress}
	::= { alaipmvVlanIpAddrTable 1 }

AlaIpmvVlanIpAddrEntry ::= SEQUENCE 
	{
		alaipmvVlanIpAddrVlanNumber INTEGER,
		alaipmvVlanIpAddrType InetAddressType,
		alaipmvVlanIpAddress InetAddress,
		alaipmvVlanIpAddrRowStatus RowStatus
	}

alaipmvVlanIpAddrVlanNumber OBJECT-TYPE
	SYNTAX INTEGER (2..4094)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094."
	::= { alaipmvVlanIpAddrEntry 1 }

alaipmvVlanIpAddrType OBJECT-TYPE
	SYNTAX InetAddressType (1..2)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The IP address type."
	::= { alaipmvVlanIpAddrEntry 2 }

alaipmvVlanIpAddress OBJECT-TYPE
	SYNTAX InetAddress
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
	"The Multicast IP address based on the address type. 
	 This IP multicast group address can be associated to multiple IPMVLANs.
         Configuration of IPv4/IPv6 Multicast Group address on multiple IPMVlans,
         that are associated with same physical/logical receiver ports are not allowed."
	::= { alaipmvVlanIpAddrEntry 3 }
	
alaipmvVlanIpAddrRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
	"This is used to create or delete the Multicast IP address in an IPMVLAN. 
	Of course the corresponding vlan must exist."
	::= { alaipmvVlanIpAddrEntry 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The IPM Vlan ipmvlan/ctag association Table 

    alaipmvVlanCtagT OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 3 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaipmvVlanCtagTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AlaIpmvVlanCtagEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    " A table that contains ipmvlan-ctag association for the IPMV feature."
    ::= { alaipmvVlanCtagT 1 }

alaipmvVlanCtagEntry OBJECT-TYPE
    SYNTAX AlaIpmvVlanCtagEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
    "A IPMVLAN-Ctag entry."
    INDEX { alaipmvVlanNumber, alaipmvVlanCtag}
    ::= { alaipmvVlanCtagTable 1 }

AlaIpmvVlanCtagEntry ::= SEQUENCE {
    alaipmvVlanNumber INTEGER,
    alaipmvVlanCtag INTEGER,
    alaipmvVlanCtagRowStatus RowStatus
    }

alaipmvVlanNumber OBJECT-TYPE
    SYNTAX INTEGER (2..4094)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094."
    ::= { alaipmvVlanCtagEntry 1 }

alaipmvVlanCtag OBJECT-TYPE
    SYNTAX INTEGER (1..4094)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    " The customer vlan id associated to the IPMVLAN.
      This customer vlan id is unique and can't be associated 
      to more than one IPM Vlan"
    ::= { alaipmvVlanCtagEntry 2 }

alaipmvVlanCtagRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
    "The status of this table entry.  The supported value for set are 
    createAndGo (4) and destroy(6), to add or remove an IPMVLAN-ctag association."
    ::= { alaipmvVlanCtagEntry 3 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The IPM Vlan ipaddress/prefixlen association Table 

    alaipmvVlanIpAddrMask OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


alaipmvVlanIpAddrMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIpmvVlanIpAddrMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP addresses assigned to an IPMVLAN."
::= { alaipmvVlanIpAddr 2 }

alaipmvVlanIpAddrMaskEntry OBJECT-TYPE
SYNTAX AlaIpmvVlanIpAddrMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A IPMVLAN IP address entry."
INDEX { alaipmvVlanIpAddrMaskVlanNumber, alaipmvVlanIpAddrMaskType ,alaipmvVlanIpAddrMaskAddress, alaipmvVlanIpAddrMaskPrefixLen}
::= { alaipmvVlanIpAddrMaskTable 1 }

AlaIpmvVlanIpAddrMaskEntry ::= SEQUENCE {
alaipmvVlanIpAddrMaskVlanNumber INTEGER,
alaipmvVlanIpAddrMaskType InetAddressType,
alaipmvVlanIpAddrMaskAddress InetAddress,
alaipmvVlanIpAddrMaskPrefixLen InetAddressPrefixLength,
alaipmvVlanIpAddrMaskRowStatus RowStatus
}

alaipmvVlanIpAddrMaskVlanNumber OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094."
::= { alaipmvVlanIpAddrMaskEntry 1 }

alaipmvVlanIpAddrMaskType OBJECT-TYPE
SYNTAX InetAddressType (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type.The allowed values are ipv4(1) and ipv6(2)."
::= { alaipmvVlanIpAddrMaskEntry 2 }

alaipmvVlanIpAddrMaskAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Multicast IP address based on the address type indicated by alaipmvVlanIpAddrMaskType. This IP multicast group address can be associated to multiple IPMVLANs. alaipmvVlanIpAddrMaskPrefixLen is used to specify a mask. The host bits of the address should be zero."
::= { alaipmvVlanIpAddrMaskEntry 3 }

alaipmvVlanIpAddrMaskPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Multicast IP address-mask length based on the address type. It must be 0-32 for alaipmvVlanIpAddrMaskType ipv4 and 128 for alaipmvVlanIpAddrMaskType ipv6. The host bits of the address alaipmvVlanIpAddrMaskAddress should be zero."
::= { alaipmvVlanIpAddrMaskEntry 4 }

alaipmvVlanIpAddrMaskRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is used to create or delete the Multicast IP address in an IPMVLAN. Of course the corresponding vlan must exist."
::= { alaipmvVlanIpAddrMaskEntry 5 }



-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alcatelIND1IPMVlanMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
        "Compliance statement for IPM Vlan."
        MODULE  MANDATORY-GROUPS
                {
                        alaipmvlanPortGroup,
        		alaipmvlanIPAddressGroup,
                        alaipmvlanIPAddrMaskGroup,
                        alaipmvlanCtagGroup
                }
        ::= { alcatelIND1IPMVlanMIBCompliances 1 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaipmvlanPortGroup OBJECT-GROUP
        OBJECTS
        {
		    alaipmvVlanPortIPMVlanNumber, --  The IPMVLAN Port Table
		    alaipmvVlanPortNumber,
		    alaipmvVlanPortType,
		    alaipmvVlanPortRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of IPM Vlan Ports."
        ::= { alcatelIND1IPMVlanMIBGroups 1 }

alaipmvlanIPAddressGroup OBJECT-GROUP
        OBJECTS
        {
		    alaipmvVlanIpAddrVlanNumber, --  The IPM Vlan IP Address Table
		    alaipmvVlanIpAddrType,
		    alaipmvVlanIpAddress,
		    alaipmvVlanIpAddrRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of IPM Vlan Address."
        ::= { alcatelIND1IPMVlanMIBGroups 2 }
       
alaipmvlanCtagGroup OBJECT-GROUP
        OBJECTS
        {
	    alaipmvVlanNumber, --  The IPM Vlan Ctag Table
            alaipmvVlanCtag,
            alaipmvVlanCtagRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of IPM Vlan Address."
        ::= { alcatelIND1IPMVlanMIBGroups 3 }

alaipmvlanIPAddrMaskGroup OBJECT-GROUP
        OBJECTS
        {
		    alaipmvVlanIpAddrMaskRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of IPM Vlan Address."
        ::= { alcatelIND1IPMVlanMIBGroups 4 }

END