path: root/MIBS/nokia/ALCATEL-IND1-DRCTM-MIB

ALCATEL-IND1-DRCTM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    IpAddress, Integer32
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    routingIND1Tm
        FROM ALCATEL-IND1-BASE;

alcatelIND1DrcTmMIB MODULE-IDENTITY

    LAST-UPDATED  "200705241500Z"
    ORGANIZATION  "Alcatel-Lucent"
    CONTACT-INFO
        "Please consult with Customer Service to ensure the most appropriate
         version of this document is used with the products in question:

                    Alcatel-Lucent, Enterprise Solutions Division
                   (Formerly Alcatel Internetworking, Incorporated)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America

        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507

        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):

             This proprietary MIB contains management information for
             the configuration of the Task Manager's global configuration 
             parameters.

         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.

         No liability shall be assumed for any incidental, indirect, special, or
         consequential damages whatsoever arising from or related to this
         document or the information contained herein.

         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.

                     Copyright (C) 1995-2007 Alcatel-Lucent
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200704030000Z"
    DESCRIPTION
        "The latest version of this MIB Module."

    ::= { routingIND1Tm 1 }

alcatelIND1DrcTmMIBObjects    OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIB 1 }
alaDrcTmConfig    OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 1 }
alaDrcTmDebug     OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 2 }
alaDrcTmRipDebug    OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 3 }
alaDrcTmOspfDebug   OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 4 }
alaDrcTmBgpDebug    OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 5 }
alaDrcTmDvmrpDebug  OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 6 }
alaDrcTmPimDebug    OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 7 }
alaDrcTmRipngDebug  OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 8 }
alaDrcTmIprmDebug   OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 9 }
alaDrcTmIpmrmDebug  OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 10 }
alaDrcTmOspf3Debug  OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 11 }
alaDrcTmLogDestination  OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 12 }
alaDrcTmIsisDebug   OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIBObjects 13 }


alaDrcTmIPRouterPrimaryAddress    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Defines the Primary IP Address of this Router."
    ::= {alaDrcTmConfig 1 }

alaDrcTmIPRouterId    OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Defines the Router-id for this Router."
    ::= {alaDrcTmConfig 2 }

alaDrcTmIPRipStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of RIP on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 3 }

alaDrcTmIPOspfStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of OSPF on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 4 }

alaDrcTmIPBgpStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of BGP on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 5 }

alaDrcTmIPDvmrpStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of DVMRP on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 6 }

alaDrcTmIPPimStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of PIM on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 7 }

alaDrcTmIPMsdpStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of MSDP on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 8 }

alaDrcTmIPRipngStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of Ripng on this router.
		 Loaded(1) is the only valid Set value."

    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 9 }

alaDrcTmIPOspf3Status     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of OSPFv3 on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 10 }

alaDrcTmIPIsisStatus     OBJECT-TYPE
    SYNTAX     INTEGER {
                   loaded(1),
                   notloaded(2),
                   loading(3)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
		"Controls the load status of ISIS on this router.
		 Loaded(1) is the only valid Set value."
    DEFVAL     { notloaded }
    ::= {alaDrcTmConfig 11 }


-- ************************************************************************
--  DRC log Configuration
-- ************************************************************************

alaDrcTmLogToSysFacility    OBJECT-TYPE
    SYNTAX     INTEGER {
                   printf(1),
                   session(2),
                   swLog(3),
                   sysTrace(4),
                   sysLog(5),
                   truncBuffer(6),
                   ringBuffer(7)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
                "Logs the DRC log messages to one of the System's Facility"
    DEFVAL     { printf }
    ::= {alaDrcTmLogDestination 1}

alaDrcTmLogToSessionId   OBJECT-TYPE
    SYNTAX     Integer32 (0..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
                "Session Id of Switch's telnet/ssh session where DRC log messages
                shall be logged.
                Default is console."
    DEFVAL     { 0 }
    ::= {alaDrcTmLogDestination 2 }

alaDrcTmLogBufferSize   OBJECT-TYPE
    SYNTAX     Integer32 (0..10000)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
                "Size of the Buffer in Kbytes where DRC log messages shall be logged."
    DEFVAL     { 100 }
    ::= {alaDrcTmLogDestination 3 }

alaDrcTmLogBufferDumpfile   OBJECT-TYPE
    SYNTAX     DisplayString ( SIZE( 0..32 ) )
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Redirect/Dump Log Buffer to the specified File.
                If filename is left null, Buffer is dumped to Console." 
    ::= {alaDrcTmLogDestination 4 }

alaDrcTmLogCriticalBufferDumpfile   OBJECT-TYPE
    SYNTAX     DisplayString ( SIZE( 0..32 ) )
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Redirect/Dump Critical Ring Buffer to the specified File.
                If filename is left null, Buffer is dumped to Console." 
    ::= {alaDrcTmLogDestination 5 }


alaDrcTmLogShowTask     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "enables/disables showing of Task Names in DRC log
                messages." 
    DEFVAL     { enable }
    ::= {alaDrcTmLogDestination 6 }

alaDrcTmLogShowFunction OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "enables/disables showing of Function Names in DRC log
                messages." 
    DEFVAL     { enable }
    ::= {alaDrcTmLogDestination 7 }

alaDrcTmLogShowLine   OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "enables/disables showing of Line Numbers in DRC log
                messages." 
    DEFVAL     { disable }
    ::= {alaDrcTmLogDestination 8 }

alaDrcTmLogShowDate    OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "enables/disables showing of Date in TimeStamp of DRC log
                messages." 
    DEFVAL     { disable }
    ::= {alaDrcTmLogDestination 9 }

alaDrcTmLogShowTime    OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "enables/disables showing of Seconds in TimeStamp of DRC log
                messages." 
    DEFVAL     { disable }
    ::= {alaDrcTmLogDestination 10 }

alaDrcTmLogClearBuffer   OBJECT-TYPE
    SYNTAX     INTEGER {
		   			buffer (1),
					criticalbuffer(2)
			   }	
    MAX-ACCESS read-write 
    STATUS     current
    DESCRIPTION
               "clears the buffer/critical buffer contents"
    DEFVAL     { buffer }
    ::= {alaDrcTmLogDestination 11 }


-- ************************************************************************
--  DRC TM Debug Configuration
-- ************************************************************************

alaDrcTmDebugLevel     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     obsolete
    DESCRIPTION
               "Sets the level of Debugging for the DRC TM on
                this router.  A level of 0 indicates no debugging.
                This object is currently not used"
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 1}


alaDrcTmDebugError     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for DRC TM Error messages"
    DEFVAL     { 1 }
    ::= {alaDrcTmDebug 2}


alaDrcTmDebugUnusedA     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for UnusedA messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 3}

alaDrcTmDebugTaskInfo     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for DRC TM Task Info messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 4}

alaDrcTmDebugEvents     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for DRC TM Event messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 5}

alaDrcTmDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for DRC TM MIP processing (including CLI/SNMP)"
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 6}

alaDrcTmDebugUnusedB     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for UnusedB messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 7}

alaDrcTmDebugMisc     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for Misc DRC TM messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 8}

alaDrcTmDebugUnused1     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for Unused1 messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 9}

alaDrcTmDebugUnused2     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for Unused2 messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 10}

alaDrcTmDebugUnused3     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for Unused3 messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 11}

alaDrcTmDebugUnused4     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for Unused4 messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 12}

alaDrcTmDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255) 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the debug level for debugging of all DRC TM messages" 
    DEFVAL     { 0 }
    ::= {alaDrcTmDebug 13}

-- ************************************************************************
--  DRC TM OSPF Debug Configuration
-- ************************************************************************

alaDrcTmOspfDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 1}

alaDrcTmOspfDebugWarning OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF Warning Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 2}

alaDrcTmOspfDebugState     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF-State Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 3}

alaDrcTmOspfDebugRecv     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the Packets received by OSPF
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 4}


alaDrcTmOspfDebugSend     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the Packets sent by OSPF from
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 5}


alaDrcTmOspfDebugFlood     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the flooding of LSAs in OSPF
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 6}

alaDrcTmOspfDebugSPF     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's SPF calculations on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 7}

alaDrcTmOspfDebugLsdb     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's LSDB-related operations
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 8}

alaDrcTmOspfDebugRdb     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's RDB-relate operation on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 9}

alaDrcTmOspfDebugAge     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's Aging process of LSA's on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 10}

alaDrcTmOspfDebugVlink     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's virtual linkoperations on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 11}

alaDrcTmOspfDebugRedist     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's route redistribution process
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 12}

alaDrcTmOspfDebugSummary     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's all summarizations on this
                router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 13}

alaDrcTmOspfDebugDbexch     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's Neighbors' database exchange
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 14}

alaDrcTmOspfDebugHello     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's hello handshaking process on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 15}

alaDrcTmOspfDebugAuth     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's authentication process on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 16}

alaDrcTmOspfDebugArea     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's area events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 17}

alaDrcTmOspfDebugIntf     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's interface operations on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 18}

alaDrcTmOspfDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the MIP processing of OSPF's specific commands
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 19}

alaDrcTmOspfDebugInfo     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's Information on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 20}

alaDrcTmOspfDebugSetup     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's Initialization setup on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 21}

alaDrcTmOspfDebugTime     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's Time related events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 22}

alaDrcTmOspfDebugTm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the OSPF's Task Manager communication events
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 23}
	
alaDrcTmOspfDebugRestart OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for debugging of
	        	OSPF Graceful Restart events and information."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 24}

alaDrcTmOspfDebugHelper OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for debugging of
	        	OSPF Graceful Restart Helper mode events and information."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 25}


alaDrcTmOspfDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of OSPF debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspfDebug 26}


-- ************************************************************************
--  DRC TM BGP Debug Configuration
-- ************************************************************************

alaDrcTmBgpDebugDamp OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Damp Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 1}

alaDrcTmBgpDebugFsm OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP FSM Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 2}

alaDrcTmBgpDebugRecvUpd OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP route update messages
               received from the neighbor. A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 3}

alaDrcTmBgpDebugSendUpd OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP route update messages
                sent to the neighbor.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 4}

alaDrcTmBgpDebugOpen OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Open messages exchanged with
               the neighbor.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 5}

alaDrcTmBgpDebugKeepAlive OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP KeepAlive messages exchanged 
                with the neighbor.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 6}

alaDrcTmBgpDebugNotify OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Notify Messages exchanged with
                the neighbor.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 7}

alaDrcTmBgpDebugPolicy OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP policy Messages exchanged with
                the neighbor.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 8}

alaDrcTmBgpDebugRoute OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Route messages on this router.
               A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 9}

alaDrcTmBgpDebugSync OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Synchronization messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 10}

alaDrcTmBgpDebugAggr OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Aggregation related messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 11}

alaDrcTmBgpDebugTcp OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP tcp connection messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 12}

alaDrcTmBgpDebugWarnings OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Warning messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 13}

alaDrcTmBgpDebugErrors OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Error messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 14}

alaDrcTmBgpDebugRedist OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Redistribute messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 15}

alaDrcTmBgpDebugPeer OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP peer messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 16}

alaDrcTmBgpDebugLocal OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP local messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 17}

alaDrcTmBgpDebugMip OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP MIP messages (including
                CLI/SNMP) on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 18}

alaDrcTmBgpDebugTm OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP and Task Manager Interaction
                messages on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 19}

alaDrcTmBgpDebugInfo OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Information messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 20}

alaDrcTmBgpDebugRestart OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP Graceful Restart messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 21}

alaDrcTmBgpDebugAll OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of BGP debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 22}

alaDrcTmBgpDebugPeer6 OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the BGP IPv6 Peer messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 23}

alaDrcTmBgpDebugRoute6 OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for BGP IPv6 route messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmBgpDebug 24}


-- ************************************************************************
--  DRC TM RIP Debug Configuration
-- ************************************************************************

alaDrcTmRipDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the RIP Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 1}

alaDrcTmRipDebugWarning OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the RIP Warning Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 2}

alaDrcTmRipDebugRecv     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the Packets received by RIP
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 3}


alaDrcTmRipDebugSend     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the Packets sent by RIP from
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 4}

alaDrcTmRipDebugRdb     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's Routing Database on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 5}

alaDrcTmRipDebugAge     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's Aging messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 6}


alaDrcTmRipDebugConfig  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's Configuration messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 7}

alaDrcTmRipDebugRedist     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's route redistribution messages
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 8}

alaDrcTmRipDebugInfo     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's Information on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 9}

alaDrcTmRipDebugSetup     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's Initialization setup on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 10}

alaDrcTmRipDebugTime     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIP's Time related events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 11}

alaDrcTmRipDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of RIP debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipDebug 12}

-- ************************************************************************
--  DRC TM IPMRM Debug Configuration
-- ************************************************************************

alaDrcTmIpmrmDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the IPMRM Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 1 }
    ::= {alaDrcTmIpmrmDebug 1}

alaDrcTmIpmrmDebugFib OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM FIB processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 2}

alaDrcTmIpmrmDebugAging   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM's Aging messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 3}


alaDrcTmIpmrmDebugProtos  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM's protos processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 4}

alaDrcTmIpmrmDebugIpms     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM/IPMS processing
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 5}

alaDrcTmIpmrmDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM's MIP processing (including CLI/SNMP)
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 6}

alaDrcTmIpmrmDebugInit     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM's Initialization setup on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 7}

alaDrcTmIpmrmDebugTm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM and Task managerinteraction on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 8}

alaDrcTmIpmrmDebugMisc     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPMRM's Miscellaneous messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 9}

alaDrcTmIpmrmDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of IPMRM debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIpmrmDebug 10}

-- ************************************************************************
--  DRC TM IPRM Debug Configuration
-- ************************************************************************

alaDrcTmIprmDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the IPRM Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 1 }
    ::= {alaDrcTmIprmDebug 1}

alaDrcTmIprmDebugAccesslist OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM AccessList handling on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 2}

alaDrcTmIprmDebugIntf     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM Interface handling
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 3}

alaDrcTmIprmDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the IPRM's MIP processing (including CLI/SNMP)
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 4}

alaDrcTmIprmDebugMisc     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for Miscellaneous IPRM issues.
                A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 5}

alaDrcTmIprmDebugNhs     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's NextHopSync handling
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 6}

alaDrcTmIprmDebugPrefix   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's Prefix registration code 
               on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 7}

alaDrcTmIprmDebugRedist     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's Redistribution code
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 8}

alaDrcTmIprmDebugRoute4   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's handling of IPv4 routes
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 9}

alaDrcTmIprmDebugRoute6     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's handling of IPv6 routes
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 10}

alaDrcTmIprmDebugRoutemap     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's RouteMap handling
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 11}

alaDrcTmIprmDebugRoutepref     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's RoutePreference code
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 12}

alaDrcTmIprmDebugStatic     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's Static route handling
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 13}

alaDrcTmIprmDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of IPRM debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 14}

alaDrcTmIprmDebugBfd     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for IPRM's BFD support on this
                router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIprmDebug 15}


-- ************************************************************************
--  DRC TM RIPNG Debug Configuration
-- ************************************************************************

alaDrcTmRipngDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the RIPng Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 1 }
    ::= {alaDrcTmRipngDebug 1}

alaDrcTmRipngDebugWarning OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the RIPng Warning Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 2}

alaDrcTmRipngDebugRecv     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the Packets received by RIPng
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 3}


alaDrcTmRipngDebugSend     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the Packets sent by RIPng from
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 4}

alaDrcTmRipngDebugRdb     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Routing Database on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 5}

alaDrcTmRipngDebugAge     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Aging messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 6}

alaDrcTmRipngDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's MIP messages
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 7}

alaDrcTmRipngDebugInfo     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Information on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 8}

alaDrcTmRipngDebugSetup     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Initialization setup on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 9}

alaDrcTmRipngDebugTime     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Timer related events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 10}

alaDrcTmRipngDebugTm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng/Task Manager Interaction 
                messages on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 11}

alaDrcTmRipngDebugRouteFilter     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Route Filter messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 12}

alaDrcTmRipngDebugNexthopFilter     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Nexthop Filter messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 13}

alaDrcTmRipngDebugSummary     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the RIPng's Summarization messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 14}

alaDrcTmRipngDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of RIPng debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 15}

alaDrcTmRipngDebugRedist     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for RIPng redistribution messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmRipngDebug 16}


-- ************************************************************************
--  DRC TM PIM Debug Configuration
-- ************************************************************************

-- ************************************************************************
--  DRC TM PIMSM & PIMDM Debug Configuration
-- ************************************************************************

alaDrcTmPimDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the PIM Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 1 }
    ::= {alaDrcTmPimDebug 1}

alaDrcTmPimDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIM's MIP processing 
                 (including CLI/SNMP) on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 2}

alaDrcTmPimDebugInit     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIM's Initialization setup on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 3}

alaDrcTmPimDebugBootstrap  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for PIMSM bootstrap messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 4}

alaDrcTmPimDebugCRP     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for PIMSM CRP processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 5}

alaDrcTmPimDebugTime     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM's Timer related events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 6}

alaDrcTmPimDebugSpt     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM's SPT related events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 7}
	
alaDrcTmPimDebugSmNbr OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the PIMSM Neighbor processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 8}


alaDrcTmPimDebugSmHello OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the PIMSM Hello Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 9}


alaDrcTmPimDebugSmRoute   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM's Route Processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 10}

alaDrcTmPimDebugSmJoinPrune     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM Join/Prune processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 11}


alaDrcTmPimDebugSmAssert  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM's Assert processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 12}


alaDrcTmPimDebugSmIgmp     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM Igmp processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 13}

alaDrcTmPimDebugSmIpmrm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM IPMRM Interaction on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 14}

alaDrcTmPimDebugSmMisc     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMSM's Miscellaneous 
			    processing on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 15}

alaDrcTmPimDebugDmNbr OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the PIMDM Neighbor processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 16}


alaDrcTmPimDebugDmHello OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the PIMDM Hello Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 17}


alaDrcTmPimDebugDmRoute   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM's Route Processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 18}

alaDrcTmPimDebugDmJoinPrune     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM Join/Prune processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 19}


alaDrcTmPimDebugDmAssert  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM's Assert processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 20}


alaDrcTmPimDebugDmIgmp     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM Igmp processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 21}

alaDrcTmPimDebugDmIpmrm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM IPMRM Interaction on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 22}

alaDrcTmPimDebugDmMisc     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM's Miscellaneous 
			    processing on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 23}

alaDrcTmPimDebugGraft     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM's Graft processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 24}

alaDrcTmPimDebugStateRefresh     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the PIMDM's State Refresh Processing 
			    on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 25}

alaDrcTmPimDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of PIM debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmPimDebug 26}

-- ************************************************************************
--  DRC TM DVMRP Debug Configuration
-- ************************************************************************

alaDrcTmDvmrpDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the DVMRP Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 1 }
    ::= {alaDrcTmDvmrpDebug 1}

alaDrcTmDvmrpDebugNbr OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the DVMRP Neighbor processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 2}

alaDrcTmDvmrpDebugRoutes  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for DVMRP Route messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 3}

alaDrcTmDvmrpDebugProbes     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for DVMRP Probes processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 4}

alaDrcTmDvmrpDebugPrunes   OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP Prunes Processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 5}

alaDrcTmDvmrpDebugGrafts     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP Grafts processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 6}

alaDrcTmDvmrpDebugTime     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP's Timer related events on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 7}

alaDrcTmDvmrpDebugIgmp     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP Igmp processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 8}

alaDrcTmDvmrpDebugFlash     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP's flash processing on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 9}

alaDrcTmDvmrpDebugMip     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP's MIP processing 
                 (including CLI/SNMP) on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 10}

alaDrcTmDvmrpDebugInit     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP's Initialization setup on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 11}

alaDrcTmDvmrpDebugTm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP Task Manager Interaction on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 12}

alaDrcTmDvmrpDebugIpmrm     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP IPMRM Interaction on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 13}

alaDrcTmDvmrpDebugMisc     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debug messages for the DVMRP's Miscellaneous on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 14}

alaDrcTmDvmrpDebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of DVMRP debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmDvmrpDebug 15}

-- ************************************************************************
--  DRC TM OSPF3 Debug Configuration
-- ************************************************************************

alaDrcTmOspf3DebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 1 }
    ::= {alaDrcTmOspf3Debug 1}

alaDrcTmOspf3DebugInfo OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Info Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 2}

alaDrcTmOspf3DebugIntf OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Interface Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 3}

alaDrcTmOspf3DebugRecv OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Recv Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 4}

alaDrcTmOspf3DebugSend OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Send Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 5}

alaDrcTmOspf3DebugNbr OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Nbr Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 6}

alaDrcTmOspf3DebugState OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 State Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 7}

alaDrcTmOspf3DebugArea OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Area Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 8}

alaDrcTmOspf3DebugLsa OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Lsa Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 9}

alaDrcTmOspf3DebugFlood OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Flood Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 10}

alaDrcTmOspf3DebugSpf OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Spf Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 11}

alaDrcTmOspf3DebugRdb OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Rdb Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 12}

alaDrcTmOspf3DebugVlink OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Vlink Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 13}

alaDrcTmOspf3DebugMip OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the OSPF3 Mip Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 14}

alaDrcTmOspf3DebugAll     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for all types of OSPF3 debug messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmOspf3Debug 15}

-- ************************************************************************
--  DRC TM ISIS Debug Configuration
-- ************************************************************************

alaDrcTmIsisDebugError OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Error Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 1}

alaDrcTmIsisDebugWarn OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Warning Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 2}

alaDrcTmIsisDebugPkt OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Packet Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 3}

alaDrcTmIsisDebugAdj OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Adjacency Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 4}

alaDrcTmIsisDebugCkt OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Circuit Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 5}

alaDrcTmIsisDebugSpf OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Spf Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 6}

alaDrcTmIsisDebugLsp OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Lsp Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 7}

alaDrcTmIsisDebugFlood OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Flood Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 8}

alaDrcTmIsisDebugIntf OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Interface Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 9}

alaDrcTmIsisDebugIprm  OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Iprm Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 10}

alaDrcTmIsisDebugMip OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Mip Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 11}

alaDrcTmIsisDebugMsg OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 12}

alaDrcTmIsisDebugLeak OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Leak Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 13}

alaDrcTmIsisDebugSummary OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Summary Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 14}

alaDrcTmIsisDebugRestart OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the ISIS Restart Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 15}

alaDrcTmIsisDebugAll OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the All ISIS Messages on
                this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDrcTmIsisDebug 16}

-- conformance information

alcatelIND1DrcTmMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1DrcTmMIB 2 }
alcatelIND1DrcTmMIBCompliances OBJECT IDENTIFIER ::=
                                          { alcatelIND1DrcTmMIBConformance 1 }
alcatelIND1DrcTmMIBGroups      OBJECT IDENTIFIER ::=
                                          { alcatelIND1DrcTmMIBConformance 2 }

-- compliance statements

alaDrcTmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running DRC Task
            Manager (TM) and implementing the ALCATEL-IND1-DRCTM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { alaDrcTmConfigMIBGroup, alaDrcTmDebugMIBGroup,
                           alaDrcTmRipDebugMIBGroup, alaDrcTmOspfDebugMIBGroup,
                           alaDrcTmBgpDebugMIBGroup, alaDrcTmDvmrpDebugMIBGroup,
                           alaDrcTmPimDebugMIBGroup, alaDrcTmRipngDebugMIBGroup,
                           alaDrcTmIprmDebugMIBGroup, alaDrcTmIpmrmDebugMIBGroup,
                           alaDrcTmOspf3DebugMIBGroup, alaDrcTmLogDestination,
				   alaDrcTmIsisDebugMIBGroup
                         } 

    ::= { alcatelIND1DrcTmMIBCompliances 1 }

-- units of conformance

alaDrcTmConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmIPRouterPrimaryAddress,
              alaDrcTmIPRouterId, alaDrcTmIPRipStatus, 
              alaDrcTmIPOspfStatus, alaDrcTmIPBgpStatus, 
              alaDrcTmIPDvmrpStatus, alaDrcTmIPPimStatus, 
              alaDrcTmIPMsdpStatus, alaDrcTmIPRipngStatus,
              alaDrcTmIPOspf3Status, alaDrcTmIPIsisStatus
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support management of DRC
            Task Manager."
    ::= { alcatelIND1DrcTmMIBGroups 1 }

alaDrcTmDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmDebugError, alaDrcTmDebugTaskInfo, alaDrcTmDebugEvents,
              alaDrcTmDebugMip, alaDrcTmDebugMisc, alaDrcTmDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 2 }


alaDrcTmRipDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmRipDebugError, alaDrcTmRipDebugWarning,
              alaDrcTmRipDebugRecv, alaDrcTmRipDebugSend,
              alaDrcTmRipDebugRdb, alaDrcTmRipDebugAge,
              alaDrcTmRipDebugConfig, alaDrcTmRipDebugRedist,
              alaDrcTmRipDebugInfo, alaDrcTmRipDebugSetup,
              alaDrcTmRipDebugTime, alaDrcTmRipDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of RIP DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 3 }

alaDrcTmOspfDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmOspfDebugError, alaDrcTmOspfDebugWarning,
              alaDrcTmOspfDebugState, alaDrcTmOspfDebugRecv,
              alaDrcTmOspfDebugSend, alaDrcTmOspfDebugFlood,
              alaDrcTmOspfDebugSPF, alaDrcTmOspfDebugLsdb,
              alaDrcTmOspfDebugRdb, alaDrcTmOspfDebugAge,
              alaDrcTmOspfDebugVlink, alaDrcTmOspfDebugRedist,
              alaDrcTmOspfDebugSummary, alaDrcTmOspfDebugDbexch,
              alaDrcTmOspfDebugHello, alaDrcTmOspfDebugAuth,
              alaDrcTmOspfDebugArea, alaDrcTmOspfDebugIntf,
              alaDrcTmOspfDebugMip, alaDrcTmOspfDebugInfo,
              alaDrcTmOspfDebugSetup, alaDrcTmOspfDebugTime,
              alaDrcTmOspfDebugTm, alaDrcTmOspfDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of OSPF DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 4 }

alaDrcTmBgpDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmBgpDebugDamp, alaDrcTmBgpDebugFsm,
              alaDrcTmBgpDebugRecvUpd, alaDrcTmBgpDebugSendUpd,
              alaDrcTmBgpDebugOpen, alaDrcTmBgpDebugKeepAlive,
              alaDrcTmBgpDebugNotify, alaDrcTmBgpDebugPolicy,
              alaDrcTmBgpDebugRoute, alaDrcTmBgpDebugSync,
              alaDrcTmBgpDebugAggr, alaDrcTmBgpDebugTcp,
              alaDrcTmBgpDebugWarnings, alaDrcTmBgpDebugErrors,
              alaDrcTmBgpDebugRedist, alaDrcTmBgpDebugPeer,
              alaDrcTmBgpDebugLocal, alaDrcTmBgpDebugMip,
              alaDrcTmBgpDebugTm, alaDrcTmBgpDebugInfo,
              alaDrcTmBgpDebugRestart, alaDrcTmBgpDebugAll,
              alaDrcTmBgpDebugPeer6, alaDrcTmBgpDebugRoute6
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of BGP DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 5 }

alaDrcTmDvmrpDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmDvmrpDebugError, alaDrcTmDvmrpDebugNbr,
              alaDrcTmDvmrpDebugRoutes, alaDrcTmDvmrpDebugProbes,
              alaDrcTmDvmrpDebugPrunes, alaDrcTmDvmrpDebugGrafts,
              alaDrcTmDvmrpDebugTime, alaDrcTmDvmrpDebugIgmp,
              alaDrcTmDvmrpDebugFlash, alaDrcTmDvmrpDebugMip,
              alaDrcTmDvmrpDebugInit, alaDrcTmDvmrpDebugTm,
              alaDrcTmDvmrpDebugIpmrm, alaDrcTmDvmrpDebugMisc,
              alaDrcTmDvmrpDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of DVMRP DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 6 }

alaDrcTmPimDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmPimDebugError, 		alaDrcTmPimDebugMip, 
			  alaDrcTmPimDebugInit,  		alaDrcTmPimDebugBootstrap, 
			  alaDrcTmPimDebugCRP, 			alaDrcTmPimDebugTime, 
			  alaDrcTmPimDebugSpt, 			alaDrcTmPimDebugSmNbr, 
			  alaDrcTmPimDebugSmHello, 		alaDrcTmPimDebugSmRoute, 
			  alaDrcTmPimDebugSmJoinPrune, 	alaDrcTmPimDebugSmAssert, 
			  alaDrcTmPimDebugSmIgmp, 		alaDrcTmPimDebugSmIpmrm, 
			  alaDrcTmPimDebugSmMisc, 		alaDrcTmPimDebugDmNbr,
			  alaDrcTmPimDebugDmHello, 		alaDrcTmPimDebugDmRoute, 
			  alaDrcTmPimDebugDmJoinPrune, 	alaDrcTmPimDebugDmAssert,
			  alaDrcTmPimDebugDmIgmp, 		alaDrcTmPimDebugDmIpmrm,
			  alaDrcTmPimDebugDmMisc,		alaDrcTmPimDebugGraft,
			  alaDrcTmPimDebugStateRefresh, alaDrcTmPimDebugAll     
			}
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of PIM DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 7 }

alaDrcTmRipngDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmRipngDebugError, alaDrcTmRipngDebugWarning,
              alaDrcTmRipngDebugRecv, alaDrcTmRipngDebugSend,
              alaDrcTmRipngDebugRdb, alaDrcTmRipngDebugAge,
              alaDrcTmRipngDebugMip, alaDrcTmRipngDebugInfo,
              alaDrcTmRipngDebugSetup, alaDrcTmRipngDebugTime,
              alaDrcTmRipngDebugTm, alaDrcTmRipngDebugRouteFilter,
              alaDrcTmRipngDebugNexthopFilter, alaDrcTmRipngDebugSummary,
              alaDrcTmRipngDebugAll, alaDrcTmRipngDebugRedist
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of RIPNG DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 8 }

alaDrcTmIprmDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmIprmDebugError, alaDrcTmIprmDebugAccesslist,
              alaDrcTmIprmDebugIntf, alaDrcTmIprmDebugMip,
              alaDrcTmIprmDebugMisc, alaDrcTmIprmDebugNhs,
              alaDrcTmIprmDebugPrefix, alaDrcTmIprmDebugRedist,
              alaDrcTmIprmDebugRoute4, alaDrcTmIprmDebugRoute6,
              alaDrcTmIprmDebugRoutemap, alaDrcTmIprmDebugRoutepref,
              alaDrcTmIprmDebugStatic, alaDrcTmIprmDebugBfd,
              alaDrcTmIprmDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of IPRM DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 9 }

alaDrcTmIpmrmDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmIpmrmDebugError, alaDrcTmIpmrmDebugFib,
              alaDrcTmIpmrmDebugAging, alaDrcTmIpmrmDebugProtos, 
			  alaDrcTmIpmrmDebugIpms, alaDrcTmIpmrmDebugMip, 
			  alaDrcTmIpmrmDebugInit, alaDrcTmIpmrmDebugTm, 
			  alaDrcTmIpmrmDebugMisc, alaDrcTmIpmrmDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of IPMRM DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 10 }


alaDrcTmOspf3DebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmOspf3DebugError, alaDrcTmOspf3DebugInfo ,
			alaDrcTmOspf3DebugIntf, alaDrcTmOspf3DebugRecv ,
			alaDrcTmOspf3DebugSend, alaDrcTmOspf3DebugNbr ,
			alaDrcTmOspf3DebugState , alaDrcTmOspf3DebugArea ,
			alaDrcTmOspf3DebugLsa , alaDrcTmOspf3DebugFlood ,
			alaDrcTmOspf3DebugSpf, alaDrcTmOspf3DebugRdb,
			alaDrcTmOspf3DebugVlink,  alaDrcTmOspf3DebugMip ,
			alaDrcTmOspf3DebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of OSPF3 DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 11 }

alaDrcTmLogDestinationMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmLogToSysFacility, alaDrcTmLogToSessionId,
              alaDrcTmLogBufferSize
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of DRC TM LOG DESTINATION."
    ::= { alcatelIND1DrcTmMIBGroups 12 }

alaDrcTmIsisDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDrcTmIsisDebugError,alaDrcTmIsisDebugWarn,
              alaDrcTmIsisDebugPkt,alaDrcTmIsisDebugAdj,
              alaDrcTmIsisDebugCkt,alaDrcTmIsisDebugSpf,
              alaDrcTmIsisDebugLsp,alaDrcTmIsisDebugFlood,
              alaDrcTmIsisDebugIntf,alaDrcTmIsisDebugIprm,
              alaDrcTmIsisDebugMip,alaDrcTmIsisDebugMsg,
              alaDrcTmIsisDebugLeak,alaDrcTmIsisDebugSummary,
              alaDrcTmIsisDebugRestart,alaDrcTmIsisDebugAll   
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support of ISIS DRC TM."
    ::= { alcatelIND1DrcTmMIBGroups 13 }
END