1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
NBS-TUNABLE-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, OBJECT-TYPE,
MODULE-IDENTITY, OBJECT-IDENTITY
FROM SNMPv2-SMI
InterfaceIndex
FROM IF-MIB
nbs
FROM NBS-MIB;
nbsTunableMib MODULE-IDENTITY
LAST-UPDATED "201706280000Z" -- June 28, 2017
ORGANIZATION "NBS"
CONTACT-INFO
"For technical support, please contact your service channel"
DESCRIPTION
"MIB for representing Tunable Optics parameters"
::= { nbs 203 }
nbsTunableGrp OBJECT-IDENTITY
STATUS current
DESCRIPTION
"MIB for representing Tunable Optics parameters"
::= { nbsTunableMib 1 }
-- *******************************************************************
--
-- the nbsTunableChannelTable
--
nbsTunableChannelTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in nbsTunableChannelTable."
::= { nbsTunableGrp 1 }
nbsTunableChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbsTunableChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to report and configure tunable optics settings."
::= { nbsTunableGrp 2 }
NbsTunableChannelEntry ::= SEQUENCE {
nbsTunableChannelIfIndex InterfaceIndex,
nbsTunableChannelFreqStart INTEGER,
nbsTunableChannelFreqEnd INTEGER,
nbsTunableChannelFreqStep INTEGER,
nbsTunableChannelFreqExponent INTEGER,
nbsTunableChannelFreqAdmin INTEGER,
nbsTunableChannelFreqOper INTEGER,
nbsTunableChannelFreqDefault INTEGER
}
nbsTunableChannelEntry OBJECT-TYPE
SYNTAX NbsTunableChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes a setting for an interface's tunable optics."
INDEX { nbsTunableChannelIfIndex }
::= { nbsTunableChannelTable 1 }
nbsTunableChannelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mib2 ifIndex of this optic's port"
::= { nbsTunableChannelEntry 1 }
nbsTunableChannelFreqStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first allowable frequency for this tunable optic, in
GigaHertz (GHz), unless FreqExponent != 9.
For L-Band, ITU Grid 48 is '184800'
For Q-Band, ITU Grid 48 is '184850'
For C-Band, ITU Grid 1 is '190100'
For H-Band, ITU Grid 1 is '190150'
If GHz does not provide the appropriate resolution, the
tunable optic may report a FreqExponent less than 9.
If 32 bits is insufficient to cover the range in GHz, the
tunable optic may report a FreqExponent greater than 9.
Not supported value: 0"
DEFVAL { 190100 }
::= { nbsTunableChannelEntry 2 }
nbsTunableChannelFreqEnd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last allowable frequency (inclusive) for this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.
For L-Band, ITU Grid 99 is '189900'
For Q-Band, ITU Grid 99 is '189950'
For C-Band, ITU Grid 72 is '197200'
For H-Band, ITU Grid 72 is '197250'
If GHz does not provide the appropriate resolution, the
tunable optic may report a FreqExponent less than 9.
If 32 bits is insufficient to cover the range in GHz, the
tunable optic may report a FreqExponent greater than 9.
Not supported value: 0"
DEFVAL { 197200 }
::= { nbsTunableChannelEntry 3 }
nbsTunableChannelFreqStep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The spacing of the allowable frequencies that this tunable
optic supports, in GigaHertz (GHz), unless FreqExponent != 9.
100 indicates the standard ITU grid spacing of 100GHz.
For example, if this tunable optic supports both C and H
band, or both Q and L band, FreqStep should report 50.
If this tunable optic supports steps finer than 1GHz,
the tunable optic may report a FreqExponent less than 9.
Not supported value: 0"
DEFVAL { 100 }
::= { nbsTunableChannelEntry 4 }
nbsTunableChannelFreqExponent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The exponent of all the Freq values (including FreqStep). 9
(the default) indicates all units are in GigaHertz (GHz)."
DEFVAL { 9 }
::= { nbsTunableChannelEntry 5 }
nbsTunableChannelFreqAdmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired frequency of this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.
Not supported value: 0"
::= { nbsTunableChannelEntry 6 }
nbsTunableChannelFreqOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational frequency of this tunable
optic, in GigaHertz (GHz), unless FreqExponent != 9.
Not supported value: 0"
::= { nbsTunableChannelEntry 7 }
nbsTunableChannelFreqDefault OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default frequency of this tunable optic, in GigaHertz
(GHz), unless FreqExponent != 9.
Not supported value: 0"
::= { nbsTunableChannelEntry 8 }
END
|
