path: root/MIBS/mrv/NBS-ROADM-MIB

NBS-ROADM-MIB DEFINITIONS ::= BEGIN

IMPORTS

    Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE,
    MODULE-IDENTITY, OBJECT-IDENTITY
        FROM SNMPv2-SMI

    InterfaceIndex, ifAlias
        FROM IF-MIB

    nbs, NbsTcMilliDb, NbsTcMHz, NbsTcStagingCommit
        FROM NBS-MIB

    DisplayString, RowStatus
        FROM SNMPv2-TC;

nbsRoadmMib  MODULE-IDENTITY
    LAST-UPDATED "201504300000Z"  -- April 30, 2015
    ORGANIZATION "NBS"
    CONTACT-INFO
      "For technical support, please contact your service channel"

    DESCRIPTION
      "Reconfigurable Optical Add/Drop Multiplexing"
    ::= { nbs 235 }

-- *******************************************************************
-- NBS-ROADM-MIB local defines
-- *******************************************************************

nbsRoadmCommonGrp  OBJECT-IDENTITY
    STATUS    current
    DESCRIPTION
       "Channels per Common port"
    ::= { nbsRoadmMib 10 }

nbsRoadmFlexgridGrp  OBJECT-IDENTITY
    STATUS    current
    DESCRIPTION
       "Describes Flexgrid centerline and bandwidth capabilities "
    ::= { nbsRoadmMib 20 }

nbsRoadmStagingGrp  OBJECT-IDENTITY
    STATUS    current
    DESCRIPTION
       "Scratchpad for users to configure channels and WSS setup"
    ::= { nbsRoadmMib 30 }

nbsRoadmCommittedGrp  OBJECT-IDENTITY
    STATUS    current
    DESCRIPTION
       "Administratively active channel and WSS setup."
    ::= { nbsRoadmMib 31 }

nbsRoadmRedundantGrp  OBJECT-IDENTITY
    STATUS    current
    DESCRIPTION
       "Current active port."
    ::= { nbsRoadmMib 32 }

nbsRoadmTraps  OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
       "SNMP Traps or Notifications"
    ::= { nbsRoadmMib 100 }

nbsRoadmEvent  OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
       "Event Notification Definitions"
    ::= { nbsRoadmTraps 0 }


-- *******************************************************************
--
-- the nbsRoadmCommonGrp
--
-- *******************************************************************

nbsRoadmCommonTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of entries in nbsRoadmCommonTable"
    ::= { nbsRoadmCommonGrp 1 }

nbsRoadmCommonTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF NbsRoadmCommonEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "WSS Switch Configuration"
    ::= { nbsRoadmCommonGrp 2 }

NbsRoadmCommonEntry ::= SEQUENCE {
    nbsRoadmCommonIfIndex            InterfaceIndex,
    nbsRoadmCommonStagingQuickCfg    INTEGER,
    nbsRoadmCommonStagingCommit      NbsTcStagingCommit,
    nbsRoadmCommonStagingAddCaps     INTEGER,
    nbsRoadmCommonStagingDropCaps    INTEGER,
    nbsRoadmCommonCommittedGridType  INTEGER,
    nbsRoadmCommonCommittedChannels  INTEGER
}

nbsRoadmCommonEntry      OBJECT-TYPE
    SYNTAX      NbsRoadmCommonEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       ""
    INDEX { nbsRoadmCommonIfIndex }
    ::= { nbsRoadmCommonTable 1 }

nbsRoadmCommonIfIndex   OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's trunk port."
    ::= { nbsRoadmCommonEntry 1 }

nbsRoadmCommonStagingQuickCfg   OBJECT-TYPE
    SYNTAX      INTEGER {
        notSupported      (1),
        supported         (2),
        std100Ghz         (3),
        std50Ghz          (4)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Impulse object used to replace this port's current
        nbsRoadmStagingTable entries with a known configuration.

        Users may create the nbsRoadmStagingTable manually, a row at a
        time.  Often it would save the users much work if they could
        initially populate this table with a standard or known
        configuration and then customize it to their own requirements.

        When read, this object will indicate whether this feature is
        available by reporting either notSupported(1) or supported(2).

        The value std100Ghz(3) overwrites this port's
        nbsRoadmStagingTable with all the standard 100 GHz ITU grid
        channels which are supported by this port.

        The value std50Ghz(4) overwrites this port's
        nbsRoadmStagingTable with all the standard 50 GHz ITU grid
        channels which are supported by this port.

        Overwriting the nbsRoadmStagingTable entries has no effect
        on the live configuration until committed using
        nbsRoadmCommonStagingCommit"
    ::= { nbsRoadmCommonEntry 10 }

nbsRoadmCommonStagingAddCaps  OBJECT-TYPE
    SYNTAX      INTEGER {
        notSupported     (1),
        capable          (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "This object indicates if this port is capable of Add"
   ::= { nbsRoadmCommonEntry 13 }

nbsRoadmCommonStagingDropCaps  OBJECT-TYPE
    SYNTAX      INTEGER {
        notSupported     (1),
        capable          (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "This object indicates if this port is capable of Drop"
   ::= { nbsRoadmCommonEntry 14 }

nbsRoadmCommonStagingCommit  OBJECT-TYPE
    SYNTAX      NbsTcStagingCommit
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Impulse object used to rewrite the entire WSS configuration.

        In order to protect users against accidentally dropping traffic
        streams, a two-step process is used.

        In the first step, users 'stage' a WSS configuration.  The
        nbsRoadmStagingTable is like a scratchpad where users can
        build and modify the entire WSS configuration without affecting
        the live network.  Here users assign channels to WSS ports, and
        for flex-grids, define the channels.

        The second step is to replace the existing WSS configuration
        (which can be read from the nbsRoadmCommittedTable). To replace
        the existing setup with the configuration specified in the
        nbsRoadmStagingTable, users set this object to apply(4).

        To discard all changes done to nbsRoadmStagingTable, users
        set this object to revertToCommitted(3), which will synchronize
        the Staging table to the Staged configuation.

        When read, this object will report the action last requested
        until that action is completed, after which it will report
        supported(2)."
    ::= { nbsRoadmCommonEntry 20 }

nbsRoadmCommonCommittedGridType  OBJECT-TYPE
    SYNTAX      INTEGER {
        notSupported     (1),
        reserved         (2),
        customized       (3),
        std100Ghz        (4),
        std50Ghz         (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "This object is automatically updated in association with writes
       to nbsRoadmCommonStagingApply.  It indicates whether or not this
       port's updated nbsRoadmCommittedTable is equivalent to a
       standard ITU grid such as would come from
       nbsRoadmCommonStagingQuickCfg.

       If the nbsRoadmCommittedTable matches the results from a
       nbsRoadmCommonStagingQuickCfg of std100Ghz(4), then this object
       will report std100Ghz(4).

       If the nbsRoadmCommittedTable matches the results from a
       nbsRoadmCommonStagingQuickCfg of std50Ghz(5), then this object
       will report std50Ghz(5).

       If the nbsRoadmCommittedTable matches neither the results from a
       nbsRoadmCommonStagingQuickCfg of std100Ghz(4) or std50Ghz(5),
       then this object will report customized(3)."
   ::= { nbsRoadmCommonEntry 30 }

nbsRoadmCommonCommittedChannels OBJECT-TYPE
   SYNTAX      INTEGER (0..100000)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The number of channels for this wdm port in the
       nbsRoadmCommittedTable."
   ::= { nbsRoadmCommonEntry 40 }


-- *******************************************************************
--
-- the nbsRoadmFlexgridGrp
--
-- *******************************************************************

nbsRoadmFlexgridTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of entries in nbsRoadmFlexgridTable."
    ::= { nbsRoadmFlexgridGrp 1 }

nbsRoadmFlexgridTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF NbsRoadmFlexgridEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Flexgrid channel creation parameters"
    ::= { nbsRoadmFlexgridGrp 2 }

NbsRoadmFlexgridEntry ::= SEQUENCE {
    nbsRoadmFlexgridIfIndex             InterfaceIndex,
    nbsRoadmFlexgridCenterlineMin       NbsTcMHz,
    nbsRoadmFlexgridCenterlineMax       NbsTcMHz,
    nbsRoadmFlexgridCenterlineIncr      NbsTcMHz,
    nbsRoadmFlexgridBandwidthMin        NbsTcMHz,
    nbsRoadmFlexgridBandwidthMax        NbsTcMHz,
    nbsRoadmFlexgridBandwidthIncr       NbsTcMHz
}

nbsRoadmFlexgridEntry      OBJECT-TYPE
   SYNTAX      NbsRoadmFlexgridEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
      ""
   INDEX { nbsRoadmFlexgridIfIndex }
   ::= { nbsRoadmFlexgridTable 1 }

nbsRoadmFlexgridIfIndex   OBJECT-TYPE
   SYNTAX      InterfaceIndex
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The Mib2 ifIndex of the Common port."
   ::= { nbsRoadmFlexgridEntry 1 }

nbsRoadmFlexgridCenterlineMin OBJECT-TYPE
   SYNTAX      NbsTcMHz
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The frequency of the lowest centerline possible."
   DEFVAL { 190100000 }
   ::= { nbsRoadmFlexgridEntry 21 }

nbsRoadmFlexgridCenterlineMax OBJECT-TYPE
   SYNTAX      NbsTcMHz
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The frequency of the highest centerline possible."
   DEFVAL { 197250000 }
   ::= { nbsRoadmFlexgridEntry 22 }

nbsRoadmFlexgridCenterlineIncr OBJECT-TYPE
   SYNTAX      NbsTcMHz
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "Centerline increment - the minimum possible difference, in MHz,
       between adjacent channels' centerlines."
   DEFVAL { 12500 }
   ::= { nbsRoadmFlexgridEntry 23 }

nbsRoadmFlexgridBandwidthMin OBJECT-TYPE
   SYNTAX      NbsTcMHz
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The minimum bandwidth possible.  Each channel must be at least
       this wide."
   DEFVAL { 25000 }
   ::= { nbsRoadmFlexgridEntry 31 }

nbsRoadmFlexgridBandwidthMax OBJECT-TYPE
   SYNTAX      NbsTcMHz
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The maximum bandwidth possible.  Each channel must be at most
       this wide."
   DEFVAL { 25000 }
   ::= { nbsRoadmFlexgridEntry 32 }

nbsRoadmFlexgridBandwidthIncr OBJECT-TYPE
   SYNTAX      NbsTcMHz
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
      "The granularity of bandwidths possible.  Each channel's
       bandwidth must be a multiple of this number."
   DEFVAL { 25000 }
   ::= { nbsRoadmFlexgridEntry 33 }



-- *******************************************************************
--
-- the nbsRoadmStagingGrp
--
-- *******************************************************************


nbsRoadmStagingTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of entries in nbsRoadmStagingTable"
    ::= { nbsRoadmStagingGrp 1 }

nbsRoadmStagingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF NbsRoadmStagingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Scratchpad where users can specify a new WSS configuration.
        Changes to this table have no effect on the system until they
        are committed using nbsRoadmCommonStagingApply."
    ::= { nbsRoadmStagingGrp 2 }

nbsRoadmStagingEntry      OBJECT-TYPE
    SYNTAX      NbsRoadmStagingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       ""
    INDEX { nbsRoadmStagingIfIndex, nbsRoadmStagingCenterline }
    ::= { nbsRoadmStagingTable 1 }

NbsRoadmStagingEntry ::= SEQUENCE {
    nbsRoadmStagingIfIndex        InterfaceIndex,
    nbsRoadmStagingCenterline     NbsTcMHz,
    nbsRoadmStagingBandwidth      NbsTcMHz,
    nbsRoadmStagingChannelName    DisplayString,
    nbsRoadmStagingAddPort        InterfaceIndex,
    nbsRoadmStagingDropPort       InterfaceIndex,
    nbsRoadmStagingSecondaryPort  InterfaceIndex,
    nbsRoadmStagingSecondAttenu   NbsTcMilliDb,
    nbsRoadmStagingAddAttenu      NbsTcMilliDb,
    nbsRoadmStagingDropAttenu     NbsTcMilliDb,
    nbsRoadmStagingItuName        DisplayString,
    nbsRoadmStagingRowStatus      RowStatus
}

nbsRoadmStagingIfIndex   OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Common port."
    ::= { nbsRoadmStagingEntry 1 }

nbsRoadmStagingCenterline   OBJECT-TYPE
    SYNTAX      NbsTcMHz
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The center frequency of this channel, in MHz"
    ::= { nbsRoadmStagingEntry 2 }

nbsRoadmStagingBandwidth  OBJECT-TYPE
    SYNTAX      NbsTcMHz
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The amount of spectrum allocated for this channel, in MHz"
    DEFVAL { 100000 }
    ::= { nbsRoadmStagingEntry 10 }

nbsRoadmStagingChannelName  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "User-assigned name for this channel.  The assigned name must be
        unique within this agent system."
    ::= { nbsRoadmStagingEntry 30 }

nbsRoadmStagingAddPort    OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Add port.

        This channel will be blocked from all Add ports except the port
        specified here.  Setting this object to 0 blocks the channel on
        all Add ports.

        Not supported value : -1"
    ::= { nbsRoadmStagingEntry 41 }

nbsRoadmStagingDropPort    OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Drop port.

        This channel will be blocked on all Drop ports except the port
        specified here.  Setting this object to 0 blocks the channel on
        all Drop ports.

        Not supported value : -1"

    ::= { nbsRoadmStagingEntry 42 }

nbsRoadmStagingSecondaryPort    OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Secondary port.

        This channel will be blocked from all Add ports except the port
        specified here.  Setting this object to 0 removes the secondary."
    ::= { nbsRoadmStagingEntry 43 }

nbsRoadmStagingSecondAttenu OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Attenuation actually being applied to the secondary port, in
        millidecibels (mdB)."
    DEFVAL { -1000000 }
    ::= { nbsRoadmStagingEntry 44 }

nbsRoadmStagingAddAttenu OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Attenuation to be applied to Add channel, expressed in
        millidecibels (mdB). Default is the blocked value as defined
        in NbsTcMilliDb"
    DEFVAL { -1000000 }
    ::= { nbsRoadmStagingEntry 51 }

nbsRoadmStagingDropAttenu OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Attenuation to be applied to Drop channel, expressed in
        millidecibels (mdB). Default is the blocked value as defined
        in NbsTcMilliDb"
    DEFVAL { -1000000 }
    ::= { nbsRoadmStagingEntry 52 }

nbsRoadmStagingItuName  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "If this channel's centerline and bandwidth match a channel
        specified in the ITU grid DWDM standard, the name of that ITU
        channel will be shown here.  The naming convention for 100GHz
        channels will be the two digit ITU channel number.  For 50GHz
        channels, the convention will be to specify either the C or H
        band, followed by the two digit ITU channel number.

        For user-defined channels that don't match an ITU channel, this
        object will report 'N/A'."
    ::= { nbsRoadmStagingEntry 53 }

nbsRoadmStagingRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Used to create and delete channels in staging area"
    DEFVAL { active }
    ::= { nbsRoadmStagingEntry 99 }



-- *******************************************************************
--
-- the nbsRoadmCommittedGrp
--
-- *******************************************************************

nbsRoadmCommittedTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of entries in nbsRoadmCommittedTable"
    ::= { nbsRoadmCommittedGrp 1 }

nbsRoadmCommittedTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF NbsRoadmCommittedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Current wss configuration"
    ::= { nbsRoadmCommittedGrp 2 }

nbsRoadmCommittedEntry      OBJECT-TYPE
    SYNTAX      NbsRoadmCommittedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       ""
    INDEX { nbsRoadmCommittedIfIndex, nbsRoadmCommittedCenterline }
    ::= { nbsRoadmCommittedTable 1 }

NbsRoadmCommittedEntry ::= SEQUENCE {
    nbsRoadmCommittedIfIndex          InterfaceIndex,
    nbsRoadmCommittedCenterline       NbsTcMHz,
    nbsRoadmCommittedBandwidth        NbsTcMHz,
    nbsRoadmCommittedChannelName      DisplayString,
    nbsRoadmCommittedAddPort          InterfaceIndex,
    nbsRoadmCommittedDropPort         InterfaceIndex,
    nbsRoadmCommittedSecondaryPort    InterfaceIndex,
    nbsRoadmCommittedSecondAttenu     NbsTcMilliDb,
    nbsRoadmCommittedAddAttenu        NbsTcMilliDb,
    nbsRoadmCommittedDropAttenu       NbsTcMilliDb,
    nbsRoadmCommittedItuName          DisplayString
}

nbsRoadmCommittedIfIndex   OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of the channel's Common port."
    ::= { nbsRoadmCommittedEntry 1 }

nbsRoadmCommittedCenterline   OBJECT-TYPE
    SYNTAX      NbsTcMHz
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The center frequency of this channel, in MHz"
    ::= { nbsRoadmCommittedEntry 2 }

nbsRoadmCommittedBandwidth  OBJECT-TYPE
    SYNTAX      NbsTcMHz
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The amount of spectrum allocated for this channel, in MHz"
    DEFVAL { 100000 }
    ::= { nbsRoadmCommittedEntry 10 }

nbsRoadmCommittedChannelName  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "User-assigned name for this channel.  The assigned name must be
        unique within this agent system.

        This object is equivalent to nbsWdmChannelCustomName."
    ::= { nbsRoadmCommittedEntry 30 }

nbsRoadmCommittedAddPort    OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Add port.

        This channel will be blocked from all Add ports except the port
        specified here.  Setting this object to 0 blocks the channel on
        all ports.

        Not supported value : -1"
    ::= { nbsRoadmCommittedEntry 41 }

nbsRoadmCommittedDropPort    OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Drop port.

        This channel will be blocked on all Drop ports except the port
        specified here.  Setting this object to 0 blocks the channel on
        all ports.

        Not supported value : -1"
    ::= { nbsRoadmCommittedEntry 42 }

nbsRoadmCommittedSecondaryPort    OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of this channel's Secondary Add port.

        This channel will be blocked from all Add ports except the port
        specified here.  Setting this object to 0 removes the secondary."
    ::= { nbsRoadmCommittedEntry 43 }

nbsRoadmCommittedSecondAttenu OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Attenuation actually being applied to the secondary port, in
        millidecibels (mdB)."
    ::= { nbsRoadmCommittedEntry 44 }

nbsRoadmCommittedAddAttenu OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Attenuation actually being applied to Add channel, in
        millidecibels (mdB)."
    ::= { nbsRoadmCommittedEntry 51 }

nbsRoadmCommittedDropAttenu OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Attenuation actually being applied to Drop channel, in
        millidecibels (mdB)."
    ::= { nbsRoadmCommittedEntry 52 }

nbsRoadmCommittedItuName  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "If this channel's centerline and bandwidth match a channel
        specified in the ITU grid DWDM standard, the name of that ITU
        channel will be shown here.  The naming convention for 100GHz
        channels will be the two digit ITU channel number.  For 50GHz
        channels, the convention will be to specify either the C or H
        band, followed by the two digit ITU channel number.

        For user-defined channels that don't match an ITU channel, this
        object will report 'N/A'."
    ::= { nbsRoadmCommittedEntry 60 }




-- *******************************************************************
--
-- the nbsRoadmRedundantGrp
--
-- *******************************************************************

nbsRoadmRedundantTableSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of entries in nbsRoadmRedundantTable"
    ::= { nbsRoadmRedundantGrp 1 }

nbsRoadmRedundantTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF NbsRoadmRedundantEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Current wss redundancy configuration"
    ::= { nbsRoadmRedundantGrp 2 }

nbsRoadmRedundantEntry      OBJECT-TYPE
    SYNTAX      NbsRoadmRedundantEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       ""
    INDEX { nbsRoadmRedundantIfIndex, nbsRoadmRedundantCenterline }
    ::= { nbsRoadmRedundantTable 1 }

NbsRoadmRedundantEntry ::= SEQUENCE {
    nbsRoadmRedundantIfIndex      InterfaceIndex,
    nbsRoadmRedundantCenterline   NbsTcMHz,
    nbsRoadmRedundantItuName      DisplayString,
    nbsRoadmRedundantChannelName  DisplayString,
    nbsRoadmRedundantMapPort      InterfaceIndex,
    nbsRoadmRedundantSecondaryPort InterfaceIndex,
    nbsRoadmRedundantCurPort      InterfaceIndex,
    nbsRoadmRedundantCurAttenu    NbsTcMilliDb,
    nbsRoadmRedundantCurState     INTEGER
}

nbsRoadmRedundantIfIndex   OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of the channel's Common port."
    ::= { nbsRoadmRedundantEntry 1 }

nbsRoadmRedundantCenterline   OBJECT-TYPE
    SYNTAX      NbsTcMHz
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The center frequency of this channel, in MHz"
    ::= { nbsRoadmRedundantEntry 2 }

nbsRoadmRedundantItuName  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "If this channel's centerline and bandwidth match a channel
        specified in the ITU grid DWDM standard, the name of that ITU
        channel will be shown here.  The naming convention for 100GHz
        channels will be the two digit ITU channel number.  For 50GHz
        channels, the convention will be to specify either the C or H
        band, followed by the two digit ITU channel number.

        For user-defined channels that don't match an ITU channel, this
        object will report 'N/A'."
    ::= { nbsRoadmRedundantEntry 10 }

nbsRoadmRedundantChannelName  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "User-assigned name for this channel.  The assigned name must be
        unique within this agent system.

        This object is equivalent to nbsWdmChannelCustomName."
    ::= { nbsRoadmRedundantEntry 20 }

nbsRoadmRedundantMapPort  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of the current channel's map port."
    ::= { nbsRoadmRedundantEntry 29 }

nbsRoadmRedundantSecondaryPort  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of the current channel's Secondary port."
    ::= { nbsRoadmRedundantEntry 30 }

nbsRoadmRedundantCurPort  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The Mib2 ifIndex of the current channel's Secondary port."
    ::= { nbsRoadmRedundantEntry 40 }

nbsRoadmRedundantCurAttenu  OBJECT-TYPE
    SYNTAX      NbsTcMilliDb
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Attenuation actually being applied to the redundant channel, in
        millidecibels (mdB)."
    ::= { nbsRoadmRedundantEntry 41 }

nbsRoadmRedundantCurState  OBJECT-TYPE
    SYNTAX      INTEGER {
        switching (1),
        active    (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The state of the current redundant port."
    ::= { nbsRoadmRedundantEntry 50 }


-- *******************************************************************
--
-- the nbsRoadmEvent group
--
-- *******************************************************************

nbsRoadmEventStageAreaCommitted  NOTIFICATION-TYPE
    OBJECTS  { nbsRoadmCommonIfIndex, ifAlias, nbsRoadmCommonCommittedGridType,
        nbsRoadmCommonCommittedChannels  }
    STATUS      current
    DESCRIPTION
       "Sent after an nbsRoadmCommonStagingCommit request is fulfilled.

        This Notification is of severity ERROR, which means it should
        be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set
        to a severity worse than error(3)."
    ::= { nbsRoadmEvent 10 }

nbsRoadmEventRedundancyTriggered  NOTIFICATION-TYPE
    OBJECTS  { nbsRoadmRedundantIfIndex, nbsRoadmRedundantCenterline  }
    STATUS      current
    DESCRIPTION
       "Sent after an channel redundancy takes effect.

        This Notification is of severity ERROR, which means it should
        be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set
        to a severity worse than error(3)."
    ::= { nbsRoadmEvent 20 }

END