path: root/MIBS/meinberg/MBG-SNMP-LTNG-MIB

MBG-SNMP-LTNG-MIB DEFINITIONS ::= BEGIN


IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE , Integer32, Unsigned32, Counter64, NOTIFICATION-TYPE
                                                                FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                                                                FROM SNMPv2-CONF
    DisplayString
								FROM SNMPv2-TC

   mbgSnmpRoot, MeinbergSwitch
                FROM MBG-SNMP-ROOT-MIB;

mbgLantimeNG MODULE-IDENTITY
    LAST-UPDATED "201605180517Z"
    ORGANIZATION "Meinberg Radio Clocks GmbH & Co. KG"
    CONTACT-INFO
         "postal:   Meinberg Funkuhren
                    Lange Wand 9
                    31812 Bad Pyrmont
                    Germany

          email:    info@meinberg.de
            web:    http://www.meinberg.de
            tel:    +49 (0) 52 81 / 93 09 - 0
            fax:    +49 (0) 52 81 / 93 09 - 30"
    DESCRIPTION
        " Meinberg LANTIME SNMP Management Information Base "

    REVISION	"201605180517Z"
    DESCRIPTION
        " Rev 6.20.001  18 Mai 2015 05:17 UTC Philipp Rahns
          Added traps mbgLtNgTrapFDMOk, mbgLtNgTrapNTPOffsetLimitExceeded and
          mbgLtNgTrapNTPOffsetLimitOk"

    REVISION	"201508270844Z"
    DESCRIPTION
        " Rev 6.18.005  27 August 2015 08:44 UTC Philipp Rahns
          Added mbgLtNgCpuSerialNumber object."

    REVISION	"201504170632Z"
    DESCRIPTION
        " Rev 6.17.xxx  17 April 2015 06:32 UTC Philipp Rahns
          Added / updated new PTP configuration objects.
          Added trap mbgLtNgTrapSHSTimeLimitOk.
          Added object mbgLtNgCmdSetTime.
          Added trap mbgLtNgTrapIMSError.
          Added trap mbgLtNgTrapIMSOk.
          Added sendTestNotification command."

    REVISION	"201411250724Z"
    DESCRIPTION
        " Rev 6.16.006  25 November 2014 07:24 UTC Philipp Rahns
          Added mbgLtNgTrapSufficientSystemResources trap."

    REVISION	"201408290810Z"
    DESCRIPTION
        " Rev 6.16.001  29 August 2014 08:10 UTC Philipp Rahns
          Added support for MRS input references.
          Fixed power supply detection and state."

    REVISION	"201401300919Z"
    DESCRIPTION
        " Rev 6.15.016  30 January 2014 09:19 UTC Philipp Rahns
          Fixed datatypes in MbgLtNgCfgPtpTableEntry."

    REVISION	"201311010939Z"
    DESCRIPTION
        " Rev 6.15.011  01 November 2013 09:39 UTC Philipp Rahns
          Added cluster traps."

    REVISION	"201310091150Z"
    DESCRIPTION
        " Rev 6.15.010  09 October 2013 11:50 UTC Philipp Rahns
          Added NTP client counter objects concerning statistics.
          Added external NTP server and its offset when MRS.
          Additional GPS related information.
          Added traps.
          Redesigned PTP port state table."

    REVISION    "201310010810Z"
    DESCRIPTION
        " Rev 6.14.020  07 October 2013 08:10 UTC Philipp Rahns
          Added GRC180 refclock support.
          Added object mbgLtNgRefclockTimeDiff.
          Added object mbgLtNgRefclockGpsPos."

    REVISION    "201309181216Z"
    DESCRIPTION
        " Rev 6.14.019  18 September 2013 12:16 UTC Philipp Rahns
          Fixed PTP port states"

    REVISION    "201302200700Z"
    DESCRIPTION
        " Rev 6.14.012  20 February 2013 07:00 UTC Philipp Rahns
          Added objects for physical ethernet port link state"

    REVISION	"201211071420Z"
    DESCRIPTION
        " Rev 6.14.009  07 November 2012 14:20 UTC Philipp Rahns
          Changed FDM frequency units"

    REVISION	"201203300713Z"
    DESCRIPTION
        " Rev 6.14.001  30 March 2012 07:13 UTC Philipp Rahns
		  Added object mbgLtNgRefclockLeapSecondDate"

    REVISION	"201201250745Z"
    DESCRIPTION
        " Rev 6.14.001  25 January 2012 07:45 UTC Philipp Rahns
          Added trap object mbgLtNgTrapCertificateExpired.
          Split MIB in root-mib-header and sub-mibs. Changed MIB module name."

    REVISION	"201109120818Z"
    DESCRIPTION
        " Rev 6.12.002  12 September 2011 08:18 UTC Philipp Rahns
          Added object mbgLtNgSubagentTimeticks"

    REVISION	"201109021110Z"
    DESCRIPTION
        " Rev 6.10.012  01 September 2011 11:10 UTC Philipp Rahns
          Changed mbgLtNgNtp objects"

    REVISION	"201106210930Z"
    DESCRIPTION
        " Rev 6.10.009  21 June 2011 09:30 UTC Philipp Rahns
          Added cluster support."

    REVISION	"201105201000Z"
    DESCRIPTION
        " Rev 6.10.006  20 May 2011 10:00 UTC Philipp Rahns
          Changed default value of 'mbgLtNgSysNumberOfPowerSupplies'
          from '0' to '1'."

    REVISION	"201105161330Z"
    DESCRIPTION
        " Rev 6.10.005  16 May 2011 13:30 UTC Philipp Rahns
          Initial MIB version for LANTIME V6."

    ::= { mbgSnmpRoot 30 }

mbgLantimeNGStatus              OBJECT IDENTIFIER    ::= { mbgLantimeNG 0 }
--- General LANTIME information objects

mbgLtNgInfo               OBJECT IDENTIFIER ::= { mbgLantimeNGStatus 0 }

mbgLtNgSnmpSubagentVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "version of this SNMP subagent"
    DEFVAL { "n/a" }
    ::= { mbgLtNgInfo  1 }

mbgLtNgFirmwareVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "installed LANTIME firmware version"
    DEFVAL { "n/a" }
    ::= { mbgLtNgInfo  2 }

mbgLtNgSerialNumber OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "LANTIME serial number"
    DEFVAL { "n/a" }
    ::= { mbgLtNgInfo  3 }

mbgLtNgSubagentTimeticks OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "sec"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Subdaemons' time alive in seconds"
    DEFVAL { 0 }
    ::= { mbgLtNgInfo  4 }

mbgLtNgCpuSerialNumber OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "CPU's serial number"
    DEFVAL { "n/a" }
    ::= { mbgLtNgInfo  5 }

--
-- Lantime Refclock information
--

mbgLtNgRefclock   OBJECT IDENTIFIER  ::= { mbgLantimeNGStatus 1 }

--- Refclock information table start

mbgLtNgNumberOfRefclocks OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "currently installed number of refclocks"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclock 1 }


mbgLtNgRefclockTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgRefclockTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of refclock related variables"
    ::= { mbgLtNgRefclock 2 }


mbgLtNgRefclockTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgRefclockTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to a refclock"
    INDEX { mbgLtNgRefclockIndex }
    ::= { mbgLtNgRefclockTable 1 }


MbgLtNgRefclockTableEntry ::=
    SEQUENCE {
	      mbgLtNgRefclockIndex            Unsigned32,
        mbgLtNgRefclockType             INTEGER,
        mbgLtNgRefclockUsage            INTEGER,
        mbgLtNgRefclockState            INTEGER,
        mbgLtNgRefclockSubstate         INTEGER,
        mbgLtNgRefclockStatusA          Unsigned32,
        mbgLtNgRefclockMaxStatusA       Unsigned32,
        mbgLtNgRefclockStatusB          Unsigned32,
        mbgLtNgRefclockMaxStatusB       Unsigned32,
        mbgLtNgRefclockAdditionalInfo   INTEGER,
        mbgLtNgRefclockLeapSecondDate   DisplayString
      }


mbgLtNgRefclockIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..2)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index for refclock"
    ::= { mbgLtNgRefclockTableEntry 1 }


mbgLtNgRefclockType OBJECT-TYPE
    SYNTAX INTEGER {
      unknown(0),
      gps166(1),
      gps167(2),
      gps167SV(3),
      gps167PC(4),
      gps167PCI(5),
      gps163(6),
      gps168PCI(7),
      gps161(8),
      gps169PCI(9),
      tcr167PCI(10),
      gps164(11),
      gps170PCI(12),
      pzf511(13),
      gps170(14),
      tcr511(15),
      am511(16),
      msf511(17),
      grc170(18),
      gps170PEX(19),
      gps162(20),
      ptp270PEX(21),
      frc511PEX(22),
      gen170(23),
      tcr170PEX(24),
      wwvb511(25),
      mgr170(26),
      jjy511(27),
      pzf600(28),
      tcr600(29),
      gps180(30),
      gln170(31),
      gps180PEX(32),
      tcr180PEX(33),
      pzf180PEX(34),
      mgr180(35),
      msf600(36),
      wwvb600(37),
      jjy600(38),
      gps180HS(39),
      gps180AMC(40),
      esi180(41),
      cpe180(42),
      lno180(43),
      grc180(44),
      liu(45),
      dcf600HS(46),
      dcf600RS(47),
      mri(48),
      bpe(49),
      gln180Pex(50),
      n2x(51),
      rsc180(52),
      lneGb(53),
      lnePpg180(54),
      scg(55),
      mdu300(56),
      sdi(57),
      fdm180(58),
      spt(59),
      pzf180(60),
      rel1000(61)
    }                
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "type of refclock"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 2 }


mbgLtNgRefclockUsage OBJECT-TYPE
    SYNTAX INTEGER {
      notAvailable(0),
      secondary(1),
      compare(2),
      primary(3)
    }                
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "what this refclock is used for"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 3 }


mbgLtNgRefclockState OBJECT-TYPE
    SYNTAX      INTEGER {
                notAvailable(0),
                synchronized(1),
                notSynchronized(2)
                }
                
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "state of GPS refclock conneted to NTP time server as value
          0: not available
          1: synchronized
          2: not synchronized"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 4 }


mbgLtNgRefclockSubstate OBJECT-TYPE
    SYNTAX INTEGER{
      mrsRefNone(-1),
      notAvailable(0),
      gpsSync(1),
      gpsTracking(2),
      gpsAntennaDisconnected(3),
      gpsWarmBoot(4),
      gpsColdBoot(5),
      gpsAntennaShortCircuit(6),
      lwNeverSync(50),
      lwNotSync(51),
      lwSync(52),
      tcrNotSync(100),
      tcrSync(101),
      mrsGpsSync(150),
      mrs10MhzSync(151),
      mrsPpsInSync(152),
      mrs10MhzPpsInSync(153),
      mrsIrigSync(154),
      mrsNtpSync(155),
      mrsPtpIeee1588Sync(156),
      mrsPtpOverE1Sync(157),
      mrsFixedFreqInSync(158),
      mrsPpsStringSync(159),
      mrsVarFreqGpioSync(160),
      mrsReserved(161),
      mrsDcf77PzfSync(162),
      mrsLongwaveSync(163),
      mrsGlonassGpsSync(164),
      mrsHavequickSync(165),
      mrsExtOscSync(166),
      mrsIntOscSync(167)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "more detailed state depending on refclock type
          0: no substate available
          gps: 1-4
          long waves (PZF,WWVB,MSF,...): 50-52 (not supported by all types)
          irig: 100-101"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 5 }


mbgLtNgRefclockStatusA OBJECT-TYPE
    SYNTAX Unsigned32 (0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "status A depending on reflcock
          gps         : indicates number of good satellites in view
          long wave
            - pzf     : correlation
            - other   : not supported
          irig        : not supported"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 6 }


mbgLtNgRefclockMaxStatusA OBJECT-TYPE
    SYNTAX Unsigned32 (0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "maximum status A depending on reflcock
          gps         : indicates number of satellites in view
          long wave
            - pzf     : 100
            - other   : not supported
          irig        : not supported"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 7 }


mbgLtNgRefclockStatusB OBJECT-TYPE
    SYNTAX Unsigned32 (0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "maximum status B depending on reflcock
          gps         : not supported
          long wave
            - all     : field strength
          irig        : not supported"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 8 }


mbgLtNgRefclockMaxStatusB OBJECT-TYPE
    SYNTAX Unsigned32 (0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "maximum status B depending on reflcock
          gps         : not supported
          long wave
            - all     : 100
          irig        : not supported"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 9 }


mbgLtNgRefclockAdditionalInfo OBJECT-TYPE
    SYNTAX INTEGER{
      notAvailable(0),
      leapSecondAnnounced(1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "any kind of additional information concerning a refclock"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclockTableEntry 10 }


mbgLtNgRefclockLeapSecondDate OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Date for next leap second"
  DEFVAL { "n/a" }
    ::= { mbgLtNgRefclockTableEntry 11 }


--- GPS refclock only information start

mbgLtNgRefclockGpsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgRefclockGpsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of gps only related variables"
    ::= { mbgLtNgRefclock 3 }


mbgLtNgRefclockGpsTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgRefclockGpsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to a GPS refclock"
    INDEX { mbgLtNgRefclockGpsIndex }
    ::= { mbgLtNgRefclockGpsTable 1 }


MbgLtNgRefclockGpsTableEntry ::=
    SEQUENCE {
        mbgLtNgRefclockGpsIndex                 Unsigned32,
        mbgLtNgRefclockGpsLatitude              DisplayString,
        mbgLtNgRefclockGpsLongitude             DisplayString,
        mbgLtNgRefclockGpsAltitude              Integer32,
        mbgLtNgRefclockGpsTdop                  DisplayString,
        mbgLtNgRefclockGpsPdop                  DisplayString,
        mbgLtNgRefclockGpsUtcOffset             Integer32
      }

mbgLtNgRefclockGpsIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index for GPS"
    ::= { mbgLtNgRefclockGpsTableEntry 1 }

mbgLtNgRefclockGpsLatitude OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "GPS' latitude"
    DEFVAL { "n/a" }
    ::= { mbgLtNgRefclockGpsTableEntry 2 }

mbgLtNgRefclockGpsLongitude OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "GPS' longitude"
    DEFVAL { "n/a" }
    ::= { mbgLtNgRefclockGpsTableEntry 3 }

mbgLtNgRefclockGpsAltitude OBJECT-TYPE
    SYNTAX Integer32
    UNITS "m"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "GPS' altitude"
    DEFVAL { -1 }
    ::= { mbgLtNgRefclockGpsTableEntry 4 }

mbgLtNgRefclockGpsTdop OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "GPS' timing dillution of precision"
    DEFVAL { "n/a" }
    ::= { mbgLtNgRefclockGpsTableEntry 5 }

mbgLtNgRefclockGpsPdop OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "GPS' positional dillution of precision"
    DEFVAL { "n/a" }
    ::= { mbgLtNgRefclockGpsTableEntry 6 }

mbgLtNgRefclockGpsUtcOffset OBJECT-TYPE
    SYNTAX Integer32
    UNITS "sec"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "GPS' offset to UTC in seconds"
    DEFVAL { -1 }
    ::= { mbgLtNgRefclockGpsTableEntry 7 }

mbgLtNgRefclockTimeDiff OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "when there is more than one refclock
         this object shows the internal time
         difference in milliseconds"
    DEFVAL { 0 }
    ::= { mbgLtNgRefclock 4 }

mbgLtNgRefclockGpsPos OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "shows current GPS receiver position"
    DEFVAL { "n/a" }
    ::= { mbgLtNgRefclock 5 }

--- GPS end

--- Refclock information table end


--
-- Lantime NTP states
--
mbgLtNgNtp        OBJECT IDENTIFIER  ::= { mbgLantimeNGStatus 2 }

mbgLtNgNtpCurrentState OBJECT-TYPE
    SYNTAX INTEGER {
      notAvailable(0),
      notSynchronized(1),
      synchronized(2)
   }    
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Current NTP's synchronization status"
    DEFVAL { 0 }
    ::= { mbgLtNgNtp 1 }

mbgLtNgNtpStratum OBJECT-TYPE
    SYNTAX      Integer32 (0..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Stratum value of the NTP"
    DEFVAL { 0 }
    ::= { mbgLtNgNtp 2 }

mbgLtNgNtpRefclockName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Name of the current refclock selected by the NTP"
    DEFVAL { "n/a" }
    ::= { mbgLtNgNtp 3 }

mbgLtNgNtpRefclockOffset OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS "ms"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Time offset between the current selected refclock and time of NTP as string in milliseconds"
  DEFVAL { "n/a" }
    ::= { mbgLtNgNtp 4 }

mbgLtNgNtpVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "integrated NTP version"
    DEFVAL { "n/a" }
    ::= { mbgLtNgNtp 5 }

--- ntp client counter

mbgLtNgNtpClientCounter        OBJECT IDENTIFIER  ::= { mbgLtNgNtp 8 }

mbgLtNgNtpCCStartedAt OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "start time of current NTP client counter session as timestamp"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 1 }

mbgLtNgNtpCCDuration OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS "sec"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "total duration of NTP client counter in seconds"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 2 }

mbgLtNgNtpCCNumberOfClients OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "total number of different clients requesting time"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 3 }

mbgLtNgNtpCCTotalRequests OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "total requests since starting the daemon"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 4 }

mbgLtNgNtpCCTotalRequestsCurrentDay OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "today's total requests"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 5 }

mbgLtNgNtpCCTotalRequestsLastHour OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "today's requests within the last completed hour"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 6 }

mbgLtNgNtpCCTotalRequestsLastMinute OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "today's requests within the last completed minute"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 7 }

mbgLtNgNtpCCTodaysClients OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "today's number of different clients requesting time"
    DEFVAL { 0 }
    ::= { mbgLtNgNtpClientCounter 8 }


mbgLtNgNtpMrs        OBJECT IDENTIFIER  ::= { mbgLtNgNtp 9 }

mbgLtNgNtpMrsServer OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "external NTP server being used for synchronization"
    DEFVAL { "n/a" }
    ::= { mbgLtNgNtpMrs 1 }

mbgLtNgNtpMrsOffset OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS "sec"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "external NTP server's offset"
    DEFVAL { "n/a" }
    ::= { mbgLtNgNtpMrs 2 }

--
-- Lantime PTP status
--

mbgLtNgPtp			OBJECT IDENTIFIER    ::= { mbgLantimeNGStatus 3 }

mbgLtNgPtpNumberOfModules	OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "number of available PTPv2 modules"
    DEFVAL { 0 }
    ::= { mbgLtNgPtp 1 }

mbgLtNgPtpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgPtpTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of PTPv2 related variables"
    ::= { mbgLtNgPtp 2 }

mbgLtNgPtpTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgPtpTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to a PTPv2 module"
    INDEX { mbgLtNgPtpIndex }
    ::= { mbgLtNgPtpTable 1 }

MbgLtNgPtpTableEntry ::=
    SEQUENCE {
	mbgLtNgPtpIndex               Unsigned32,
        mbgLtNgPtpMode            INTEGER,
        mbgLtNgPtpPortState       INTEGER,
        mbgLtNgPtpGrandmasterMac  DisplayString,
        mbgLtNgPtpClockAccuracy   INTEGER,
        mbgLtNgPtpClockClass      Unsigned32,
        mbgLtNgPtpTimeSource      INTEGER,
        mbgLtNgPtpUtcOffset       Unsigned32,
        mbgLtNgPtpTimeSeconds     Counter64,
        mbgLtNgPtpTsuTime         DisplayString,
        mbgLtNgPtpSysTime         DisplayString,
        mbgLtNgPtpPortLinkup      MeinbergSwitch,
        mbgLtNgPtpOffsetFromGM    DisplayString,
        mbgLtNgPtpPathDelay       DisplayString,
        mbgLtNgPtpDelayMec        INTEGER,
	    mbgLtNgPtpDomain          Unsigned32,
        mbgLtNgPtpGrandmasterUuid DisplayString,
        mbgLtNgPtpLocalMac        DisplayString,
        mbgLtNgPtpDelayAsymmetry  DisplayString,
        mbgLtNgPtpAvail           INTEGER
      }

mbgLtNgPtpIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index for PTPv2 module"
    ::= { mbgLtNgPtpTableEntry 1 }

mbgLtNgPtpMode	OBJECT-TYPE
    SYNTAX INTEGER {
        notAvailable(0),  
        stopped		(1),
        master		(2),
        slave		(3),
	    ordinary	(4)
      }
    MAX-ACCESS read-only
    STATUS     obsolete
    DESCRIPTION
        "PTPv2 modus as integer. This object is obsolete and
         always returns '0'. Please see alternates
         mbgLtNgPtpPortState and mbgLtNgPtpRole."
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 2 }

mbgLtNgPtpPortState OBJECT-TYPE
    SYNTAX INTEGER {
        uninitialized   (0),
        initializing    (1),
      	faulty          (2), 
        disabled   	    (3),
        listening	    (4),
        preMaster       (5),
        master          (6),
      	passive	        (7),
	    uncalibrated    (8),
	    slave           (9)
      }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "port state as integer"
    DEFVAL { 3 }
    ::= { mbgLtNgPtpTableEntry 3 }

mbgLtNgPtpGrandmasterMac OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "MAC address of current grandmaster"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 4 }

mbgLtNgPtpClockAccuracy OBJECT-TYPE
    SYNTAX  INTEGER {
      notAvailable(0),
      timeAccurateTo25ns(32),
      timeAccurateTo100ns(33),
      timeAccurateTo250ns(34),
      timeAccurateTo1us(35),
      timeAccurateTo2Point5us(36),
      timeAccurateTo10us(37),
      timeAccurateTo25us(38),
      timeAccurateTo100us(39),
      timeAccurateTo250us(40),
      timeAccurateTo1ms(41),
      timeAccurateTo2to5ms(42),
      timeAccurateTo10ms(43),
      timeAccurateTo25ms(44),
      timeAccurateTo100ms(45),
      timeAccurateTo250ms(46),
      timeAccurateTo1s(47),
      timeAccurateTo10s(48),
      timeAccurateToGT10s(49),
      timeAccurateToUnknown(254)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "indicates the source of time"
    REFERENCE    "IEEE Std. 1588-2008"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 5 }

mbgLtNgPtpClockClass  OBJECT-TYPE	
    SYNTAX Unsigned32 (0..255)
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "denotes the traceability of the time or frequency"
    REFERENCE    "IEEE Std. 1588-2008"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 6 }

mbgLtNgPtpTimeSource  OBJECT-TYPE	
    SYNTAX INTEGER {
        notAvailable(0),
        atomicClock(16),
        gps(32),
        terrestrialRadio(48),
        ptp(64),
        ntp(80),
        handSet(96),
        other(144),
        internalOscillator(160)
        }
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "source of time being used"
    REFERENCE    "IEEE Std. 1588-2008"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 7 }

mbgLtNgPtpUtcOffset  OBJECT-TYPE	
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "offset from PTP's TAI time to UTC time"
    REFERENCE    "IEEE Std. 1588-2008"
    DEFVAL { 35 }
    ::= { mbgLtNgPtpTableEntry 8 }

mbgLtNgPtpTimeSeconds  OBJECT-TYPE	
    SYNTAX Counter64
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "PTP seconds"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 9 }

mbgLtNgPtpTsuTime OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "current time on PTP TSU"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 10 }

mbgLtNgPtpSysTime OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "current system time"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 11 }

mbgLtNgPtpPortLinkup  OBJECT-TYPE	
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "PTP port's physical link-up"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 12 }

mbgLtNgPtpOffsetFromGM OBJECT-TYPE
    SYNTAX DisplayString
    UNITS "ns"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
         "offset from grandmaster in nanoseconds"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 13 }

mbgLtNgPtpPathDelay OBJECT-TYPE
    SYNTAX DisplayString
    UNITS "ns"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "network delay in nanoseconds"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 14 }

mbgLtNgPtpDelayMec  OBJECT-TYPE	
    SYNTAX INTEGER {
        end2End(0),
        peer2Peer(1)
    }
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "delay mechanism"
    REFERENCE    "IEEE Std. 1588-2008"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 15 }

mbgLtNgPtpDomain  OBJECT-TYPE	
    SYNTAX Unsigned32 (0..255)
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "domain number"
    REFERENCE    "IEEE Std. 1588-2008"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 16 }

mbgLtNgPtpGrandmasterUuid OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "grandmaster uuid"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 17 }

mbgLtNgPtpLocalMac OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "local MAC address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 18 }

mbgLtNgPtpDelayAsymmetry OBJECT-TYPE
    SYNTAX DisplayString
    UNITS "ns"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "asymmetric network delay in nanoseconds"
    DEFVAL { "n/a" }
    ::= { mbgLtNgPtpTableEntry 19 }

mbgLtNgPtpAvail  OBJECT-TYPE	
    SYNTAX INTEGER {
        no(0),
        yes(1)
    }
    MAX-ACCESS read-only
    STATUS       current
    DESCRIPTION
        "Signals whether PTP instance is avail or not"
    DEFVAL { 0 }
    ::= { mbgLtNgPtpTableEntry 20 }

-- 
-- FDM Powerline Frequency Deviation Monitor Module
-- 

mbgLtNgFdm			OBJECT IDENTIFIER    ::= { mbgLantimeNGStatus 4 }

mbgLtNgFdmFreq OBJECT-TYPE
    SYNTAX      Unsigned32 (0|45000..65000)
    UNITS "mHz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "powerline frequency in mHz; 0 indicates that no data is available"
    DEFVAL { 0 }
    ::= { mbgLtNgFdm 1 }

mbgLtNgFdmFreqDev OBJECT-TYPE
    SYNTAX      Integer32 (-15000..15000)
    UNITS "mHz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "frequency deviation in mHz depending on the configured nominal frequency; check 'mbgLtNgFdmFreq' for error"
    DEFVAL { 0 }
    ::= { mbgLtNgFdm 2 }

mbgLtNgFdmNomFreq OBJECT-TYPE
    SYNTAX      Unsigned32 (0|50000|60000)
    UNITS "mHz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "nominal frequency in mHz; can be 50000 (50Hz) or 60000 (60Hz); 0 indicates that no value is configured"
    DEFVAL { 0 }
    ::= { mbgLtNgFdm 3 }


--
-- System hardware ( fan, power supply, ... )
--

mbgLtNgSystemHardware			OBJECT IDENTIFIER    ::= { mbgLantimeNGStatus 5 }

-- power supplies

mbgLtNgSysPowerSupply 		OBJECT IDENTIFIER    ::= { mbgLtNgSystemHardware 0 }

mbgLtNgSysNumberOfPowerSupplies	OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "number of available power supplies"
    DEFVAL { 1 }
    ::= { mbgLtNgSysPowerSupply 1 }

mbgLtNgSysPsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgSysPsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of power supply stati"
    ::= { mbgLtNgSysPowerSupply 2 }

mbgLtNgSysPsTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgSysPsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to power supplies"
    INDEX { mbgLtNgSysPsIndex }
    ::= { mbgLtNgSysPsTable 1 }

MbgLtNgSysPsTableEntry ::=
    SEQUENCE {
	    mbgLtNgSysPsIndex          Unsigned32,
        mbgLtNgSysPsStatus         INTEGER
      }

mbgLtNgSysPsIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index of power supply"
    ::= { mbgLtNgSysPsTableEntry 1 }

mbgLtNgSysPsStatus	OBJECT-TYPE
    SYNTAX INTEGER {
        notAvailable(0),  
        down(1),
        up(2)
      }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Status of power supply"
    DEFVAL { 0 }
    ::= { mbgLtNgSysPsTableEntry 2 }

-- fans

mbgLtNgSysFan 		OBJECT IDENTIFIER    ::= { mbgLtNgSystemHardware 1 }

mbgLtNgSysNumberOfFans	OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "number of available fans"
    DEFVAL { 0 }
    ::= { mbgLtNgSysFan 1 }

mbgLtNgSysFanTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgSysFanTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of power supply stati"
    ::= { mbgLtNgSysFan 2 }

mbgLtNgSysFanTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgSysFanTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to fans"
    INDEX { mbgLtNgSysFanIndex }
    ::= { mbgLtNgSysFanTable 1 }

MbgLtNgSysFanTableEntry ::=
    SEQUENCE {
	    mbgLtNgSysFanIndex          Unsigned32,
        mbgLtNgSysFanStatus         INTEGER,
        mbgLtNgSysFanError          INTEGER
      }

mbgLtNgSysFanIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index of fan"
    ::= { mbgLtNgSysFanTableEntry 1 }

mbgLtNgSysFanStatus	OBJECT-TYPE
    SYNTAX INTEGER {
        notAvailable(0),  
        off(1),
        on(2)
      }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Status of fan"
    DEFVAL { 0 }
    ::= { mbgLtNgSysFanTableEntry 2 }

mbgLtNgSysFanError	OBJECT-TYPE
    SYNTAX INTEGER {
        notAvailable(0),
        no(1),
        yes(2)
      }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "fan's error field"
    DEFVAL { 0 }
    ::= { mbgLtNgSysFanTableEntry 3 }


-- temperature

mbgLtNgSysTemperature 		OBJECT IDENTIFIER    ::= { mbgLtNgSystemHardware 2 }

mbgLtNgSysTempCelsius	OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "C"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "temperature in degree Celsius"
    DEFVAL { 0 }
    ::= { mbgLtNgSysTemperature 1 }


--
-- Cluster status information
--

mbgLtNgCluster			OBJECT IDENTIFIER    ::= { mbgLantimeNGStatus 6 }

mbgLtNgNumberOfClusters OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "number of active running clusters"
    DEFVAL { 0 }
    ::= { mbgLtNgCluster 1 }

mbgLtNgClusterTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgClusterTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of cluster status information"
    ::= { mbgLtNgCluster 2 }

mbgLtNgClusterTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgClusterTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to running and active clusters"
    INDEX { mbgLtNgClusterIndex }
    ::= { mbgLtNgClusterTable 1 }

MbgLtNgClusterTableEntry ::=
    SEQUENCE {
	    mbgLtNgClusterIndex                 Unsigned32,
        mbgLtNgClusterCommunicationIp       DisplayString,
        mbgLtNgClusterPortState             INTEGER,
        mbgLtNgClusterMasterSerial          DisplayString,
        mbgLtNgClusterMasterIp              DisplayString,
        mbgLtNgClusterMasterPriority        Unsigned32,
        mbgLtNgClusterClockClass            INTEGER,
        mbgLtNgClusterClockStatus           INTEGER,
        mbgLtNgClusterReconfigurationState  INTEGER,
        mbgLtNgClusterIsFalseticker         INTEGER
      }

mbgLtNgClusterIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index of power supply"
    ::= { mbgLtNgClusterTableEntry 1 }

mbgLtNgClusterCommunicationIp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "ip of cluster interface"
    DEFVAL { "n/a" }
    ::= { mbgLtNgClusterTableEntry 2 }

mbgLtNgClusterPortState OBJECT-TYPE
    SYNTAX INTEGER{
      notAvailable(0),
      master(1),
      slave(2),
      listening(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "state of cluster"
    DEFVAL { 0 }
    ::= { mbgLtNgClusterTableEntry 3 }

mbgLtNgClusterMasterSerial OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "serial number of cluster's master"
    DEFVAL { "n/a" }
    ::= { mbgLtNgClusterTableEntry 4 }

mbgLtNgClusterMasterIp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "ip address of cluster's master"
    DEFVAL { "n/a" }
    ::= { mbgLtNgClusterTableEntry 5 }

mbgLtNgClusterMasterPriority OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "priority of cluster master"
    DEFVAL { 0 }
    ::= { mbgLtNgClusterTableEntry 6 }

mbgLtNgClusterClockClass OBJECT-TYPE
    SYNTAX INTEGER{
      notAvailable(0),
      gps(3),
      pzf(4),
      am(5),
      irig(6),
      pps(7),
      ptp(8),
      ntp(9),
      e1(10),
      rdt(11)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "reference's clock class"
    DEFVAL { 0 }
    ::= { mbgLtNgClusterTableEntry 7 }

mbgLtNgClusterClockStatus OBJECT-TYPE
    SYNTAX INTEGER{
      notAvailable(0),
      normalOperation(1),
      freeRunningOrTracking(2),
      antennaFailure(3),
      invalid(4)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "reference's clock status"
    DEFVAL { 0 }
    ::= { mbgLtNgClusterTableEntry 8 }

mbgLtNgClusterReconfigurationState OBJECT-TYPE
    SYNTAX INTEGER{
      notAvailable(0),
      normal(1),
      masterToSlave(2),
      slaveToMaster(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "current reconfiguration state"
    DEFVAL { 0 }
    ::= { mbgLtNgClusterTableEntry 9 }

mbgLtNgClusterIsFalseticker OBJECT-TYPE
    SYNTAX INTEGER{
      notAvailable(0),
      no(1),
      yes(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "am I a falseticker?"
    DEFVAL { 0 }
    ::= { mbgLtNgClusterTableEntry 10 }

--
-- Misc objects
--

mbgLtNgMisc                  OBJECT IDENTIFIER    ::= { mbgLantimeNGStatus 7 }

mbgLtNgEthPortLinkTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgEthPortLinkTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of physical ethernet interface port link states"
    ::= { mbgLtNgMisc 1 }

mbgLtNgEthPortLinkTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgEthPortLinkTableEntry
    MAX-ACCESS not-accessible
      STATUS current
    DESCRIPTION
         "port link states for each physical ethernet interface"
    INDEX { mbgLtNgEthPortLinkIndex }
    ::= { mbgLtNgEthPortLinkTable 1 }

MbgLtNgEthPortLinkTableEntry ::=
    SEQUENCE {
        mbgLtNgEthPortLinkIndex  Unsigned32,
        mbgLtNgEthPortLinkState  INTEGER
      }

mbgLtNgEthPortLinkIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "interface index"
    ::= { mbgLtNgEthPortLinkTableEntry 1 }

mbgLtNgEthPortLinkState OBJECT-TYPE
    SYNTAX INTEGER
    {
        down(0),
        up(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "link state"
    DEFVAL { 0 }
    ::= { mbgLtNgEthPortLinkTableEntry 2 }


--
-- Meinberg Lantime CFG MIB objects for agent module--
--

mbgLtNgConfig        OBJECT IDENTIFIER  ::= { mbgLantimeNG 1 }

--
-- Ethernet page
--
mbgLtNgCfgEthernet        OBJECT IDENTIFIER ::= { mbgLtNgConfig 0 }

mbgLtNgCfgEthernetHostname OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "devices' hostname"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEthernet 1 }

mbgLtNgCfgEthernetDomain OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "devices' domain membership"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEthernet 2 }

mbgLtNgCfgEthernetNameserver1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "first nameserver's ip address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEthernet 3 }

mbgLtNgCfgEthernetNameserver2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "second nameserver's ip address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEthernet 4 }

mbgLtNgCfgEthernetIpv4Gateway OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "device's ethernet ipv4 gateway"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEthernet 5 }

mbgLtNgCfgEthernetIpv6Gateway OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "device's ethernet ipv6 gateway"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEthernet 6 }


--- start interface specific table oids


mbgLtNgCfgNumberOfPhysicalIf OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "number of virtual interfaces interfaces"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgEthernet 7 }

mbgLtNgCfgNumberOfVirtualIf OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
         "number of virtual interfaces interfaces"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgEthernet 8 }


-- physical interface table/configuration


mbgLtNgCfgPhysicalIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgCfgPhysicalIfTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of service stati for the ethernet interfaces"
    ::= { mbgLtNgCfgEthernet 9 }

mbgLtNgCfgPhysicalIfTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgCfgPhysicalIfTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to a mrs input reference"
    INDEX { mbgLtNgCfgPhysicalIfIndex }
    ::= { mbgLtNgCfgPhysicalIfTable 1 }

MbgLtNgCfgPhysicalIfTableEntry ::=
    SEQUENCE {
	    mbgLtNgCfgPhysicalIfIndex Unsigned32,
	    mbgLtNgCfgPhysicalIfMac DisplayString,
	    mbgLtNgCfgPhysicalIfNetLinkMode INTEGER,
	    mbgLtNgCfgPhysicalIfIndicateLink MeinbergSwitch,
	    mbgLtNgCfgPhysicalIfBondingGroup Unsigned32,
	    mbgLtNgCfgPhysicalIfIpv6Mode INTEGER
    }

mbgLtNgCfgPhysicalIfIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "specifies the physical interface index"
    ::= { mbgLtNgCfgPhysicalIfTableEntry 1 }

mbgLtNgCfgPhysicalIfMac OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interface's physical MAC address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPhysicalIfTableEntry 2 }

mbgLtNgCfgPhysicalIfNetLinkMode OBJECT-TYPE
    SYNTAX INTEGER{
      auto(0),
      hd10Mbit(1),
      fd10Mbit(2),
      hd100Mbit(3),
      fd100Mbit(4),
      hd1000Mbit(5),
      fd1000Mbit(6)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "interface's net link mode; hd = half-duplex; fd = full-duplex"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPhysicalIfTableEntry 3 }

mbgLtNgCfgPhysicalIfIndicateLink OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "indicate link via front panel LED"
    DEFVAL { 1 }
    ::= { mbgLtNgCfgPhysicalIfTableEntry 4 }

mbgLtNgCfgPhysicalIfBondingGroup OBJECT-TYPE
    SYNTAX Unsigned32(0..5)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "assign interface to bonding group; '0' means not assigned"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPhysicalIfTableEntry 5 }

mbgLtNgCfgPhysicalIfIpv6Mode OBJECT-TYPE
    SYNTAX INTEGER{
      deactivated(0),
      activated(1),
      activatedWithAutoconf(2)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "enable IPv6 mode"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPhysicalIfTableEntry 6 }

-- virtual interface table/configuration


mbgLtNgCfgVirtualIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgCfgVirtualIfTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of service stati for the ethernet interfaces"
    ::= { mbgLtNgCfgEthernet 10 }

mbgLtNgCfgVirtualIfTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgCfgVirtualIfTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to a mrs input reference"
    INDEX { mbgLtNgCfgVirtualIfIndex }
    ::= { mbgLtNgCfgVirtualIfTable 1 }

MbgLtNgCfgVirtualIfTableEntry ::=
    SEQUENCE {
	    mbgLtNgCfgVirtualIfIndex Unsigned32,
	    mbgLtNgCfgVirtualIfIpv4Addr DisplayString,
	    mbgLtNgCfgVirtualIfIpv4Netmask DisplayString,
	    mbgLtNgCfgVirtualIfIpv4Dhcp MeinbergSwitch,
      mbgLtNgCfgVirtualIfIpv4AddrFromDhcp DisplayString,
      mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp DisplayString,
      mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp DisplayString,
      mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp DisplayString,
      mbgLtNgCfgVirtualIfIpv4DnsFromDhcp DisplayString,
      mbgLtNgCfgVirtualIfIpv4DomainFromDhcp DisplayString,
	    mbgLtNgCfgVirtualIfIpv6Addr DisplayString,
	    mbgLtNgCfgVirtualIfIpv6Dhcp MeinbergSwitch,
	    mbgLtNgCfgVirtualIfIpv6RoutAdd DisplayString,
	    mbgLtNgCfgVirtualIfIpv6LinkLocal DisplayString,
      mbgLtNgCfgVirtualIfAssigned Unsigned32,
      mbgLtNgCfgVirtualIfMac DisplayString,
      mbgLtNgCfgVirtualIfLabel DisplayString,
	    mbgLtNgCfgVirtualIfVlan MeinbergSwitch,
	    mbgLtNgCfgVirtualIfVlanTag Unsigned32,
	    mbgLtNgCfgVirtualIfVlanPrio Unsigned32,
	    mbgLtNgCfgVirtualIfCluster MeinbergSwitch,
	    mbgLtNgCfgVirtualIfClusterIpv4Addr DisplayString,
	    mbgLtNgCfgVirtualIfClusterIpv4Netmask DisplayString,
	    mbgLtNgCfgVirtualIfClusterPrio Unsigned32,
	    mbgLtNgCfgVirtualIfServiceNtp MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceHttp MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceHttps MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceTelnet MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceSsh MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceSnmp MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceFtp MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceTime MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceDaytime MeinbergSwitch,
	    mbgLtNgCfgVirtualIfServiceFpc MeinbergSwitch
      }

mbgLtNgCfgVirtualIfIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "specifies the virtual interface index"
    ::= { mbgLtNgCfgVirtualIfTableEntry 1 }

mbgLtNgCfgVirtualIfIpv4Addr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 2 }

mbgLtNgCfgVirtualIfIpv4Netmask OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 netmask"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 3 }

mbgLtNgCfgVirtualIfIpv4Dhcp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "interface uses ipv4 dhcp?"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 4 }

-- ipv4 dhcp related stuff

mbgLtNgCfgVirtualIfIpv4AddrFromDhcp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 address received from dhcp"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 5 }

mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 netmask received from dhcp"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 6 }

mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 broadcast received from dhcp"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 7 }

mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 gateway received from dhcp"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 8 }

mbgLtNgCfgVirtualIfIpv4DnsFromDhcp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 dns server received from dhcp"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 9 }

mbgLtNgCfgVirtualIfIpv4DomainFromDhcp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv4 dns server received from dhcp"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 10 }

--- ipv6

mbgLtNgCfgVirtualIfIpv6Addr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "interfaces' ipv6 address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 11 }

mbgLtNgCfgVirtualIfIpv6Dhcp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "interfaces uses ipv6 dhcp"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 12 }

mbgLtNgCfgVirtualIfIpv6RoutAdd OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' router advertisement ipv6 address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 13 }

mbgLtNgCfgVirtualIfIpv6LinkLocal OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "interfaces' ipv6 link local address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 14 }

--- misc stuff

mbgLtNgCfgVirtualIfAssigned OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "mapping to the physical interface this virtual one is assigned to"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 15 }

mbgLtNgCfgVirtualIfMac OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "MAC-address of this virtual interface"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 16 }

mbgLtNgCfgVirtualIfLabel OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "user description for this label (like an alias)"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 17 }

--- vlan

mbgLtNgCfgVirtualIfVlan OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is vlan enabled"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 18 }

mbgLtNgCfgVirtualIfVlanTag OBJECT-TYPE
    SYNTAX Unsigned32(0..4094)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "vlan tag"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 19 }

mbgLtNgCfgVirtualIfVlanPrio OBJECT-TYPE
    SYNTAX Unsigned32(0..7)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "vlan priority"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 20 }

--- cluster

mbgLtNgCfgVirtualIfCluster OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is cluster mode enabled"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 21 }

mbgLtNgCfgVirtualIfClusterIpv4Addr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "ipv4 cluster address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 22 }

mbgLtNgCfgVirtualIfClusterIpv4Netmask OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "cluster ipv4 netmask"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgVirtualIfTableEntry 23 }

mbgLtNgCfgVirtualIfClusterPrio OBJECT-TYPE
    SYNTAX Unsigned32(0..10)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "cluster priority"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 24 }

--- service

mbgLtNgCfgVirtualIfServiceNtp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is ntp active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 25 }

mbgLtNgCfgVirtualIfServiceHttp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is http active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 26 }

mbgLtNgCfgVirtualIfServiceHttps OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is https active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 27 }

mbgLtNgCfgVirtualIfServiceTelnet OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is telnet active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 28 }

mbgLtNgCfgVirtualIfServiceSsh OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is ssh active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 29 }

mbgLtNgCfgVirtualIfServiceSnmp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is snmp active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 30 }

mbgLtNgCfgVirtualIfServiceFtp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is ftp active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 31 }

mbgLtNgCfgVirtualIfServiceTime OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is time active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 32 }

mbgLtNgCfgVirtualIfServiceDaytime OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is daytime active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 33 }

mbgLtNgCfgVirtualIfServiceFpc OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "is fpc active on this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgVirtualIfTableEntry 34 }

--- table interfaces end


mbgLtNgCfgEthernetGenClusterPort OBJECT-TYPE
    SYNTAX Unsigned32(0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "general cluster port"
    ::= { mbgLtNgCfgEthernet 11 }

mbgLtNgCfgEthernetGenClusterIp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "general multicast cluster address"
    ::= { mbgLtNgCfgEthernet 12 }


--
-- Notification page
--

mbgLtNgCfgNotifications   OBJECT IDENTIFIER ::= { mbgLtNgConfig 1 }

--- syslog

mbgLtNgCfgSyslog   OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 0 }

mbgLtNgCfgSyslogServerAddr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "comma separated string of all configured syslog servers;
         use such a list to set syslog servers"
    DEFVAL{ "n/a" }
    ::= { mbgLtNgCfgSyslog 1 }

mbgLtNgCfgSyslogLoglevel OBJECT-TYPE
    SYNTAX INTEGER{
      emergency(0),
      alert(1),
      critical(2),
      error(3),
      warning(4),
      notice(5),
      info(6)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "loglevel for syslog server"
    DEFVAL{ 0 }
    ::= { mbgLtNgCfgSyslog 2 }

--- email

mbgLtNgCfgEmail   OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 1 }

mbgLtNgCfgEmailTo OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "email address to send alerts etc. to (receiving address)"
    DEFVAL{ "n/a" }
    ::= { mbgLtNgCfgEmail 1 }

mbgLtNgCfgEmailFrom OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "email address to send alerts etc. from (sending address)"
    DEFVAL{ "n/a" }
    ::= { mbgLtNgCfgEmail 2 }

mbgLtNgCfgEmailSmarthostAddr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SMTP smarthost used to send mail (ip or hostname)"
    DEFVAL{ "n/a" }
    ::= { mbgLtNgCfgEmail 3 }

mbgLtNgCfgEmailSmarthostPort OBJECT-TYPE
    SYNTAX      Unsigned32(0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SMTP smarthost listenning port"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgEmail 4 }

mbgLtNgCfgEmailSmarthostAuth OBJECT-TYPE
    SYNTAX      MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "use authentication for smarthost"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgEmail 5 }

mbgLtNgCfgEmailSmarthostAuthUser OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "user to authenticate at smarthost"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEmail 6 }
  
mbgLtNgCfgEmailSmarthostAuthPw OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "password to authenticate user at smarthost"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgEmail 7 }

-- winpopup

mbgLtNgCfgWinpopup        OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 2 }

mbgLtNgCfgWmailAddress1 OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "first windows popup alert receiver (ip or hostname)"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgWinpopup 1 }

mbgLtNgCfgWmailAddress2 OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "second windows popup alert receiver (ip or hostname)"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgWinpopup 2 }

-- snmp

mbgLtNgCfgSNMP    OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 3 }

mbgLtNgCfgSnmpTrapRecTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgCfgSnmpTrapRecTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of SNMP trap receiver information"
    ::= { mbgLtNgCfgSNMP 1 }

mbgLtNgCfgSnmpTrapRecTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgCfgSnmpTrapRecTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to an interface and concerning broad-, multi- and manycast"
    INDEX { mbgLtNgCfgSnmpTrapRecIndex }
    ::= { mbgLtNgCfgSnmpTrapRecTable 1 }


MbgLtNgCfgSnmpTrapRecTableEntry ::=
    SEQUENCE {
        mbgLtNgCfgSnmpTrapRecIndex     	Unsigned32,
	      mbgLtNgCfgSnmpTrapRecAddr	      DisplayString,
	      mbgLtNgCfgSnmpTrapRecCommunity 	DisplayString,
	      mbgLtNgCfgSnmpTrapRecVersion	  INTEGER
      }

mbgLtNgCfgSnmpTrapRecIndex OBJECT-TYPE
    SYNTAX Unsigned32(0..4)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index of different SNMP trap receivers"
    ::= { mbgLtNgCfgSnmpTrapRecTableEntry 1 }

mbgLtNgCfgSnmpTrapRecAddr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SNMP trap receiver address (ip or hostname)"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgSnmpTrapRecTableEntry 2 }

mbgLtNgCfgSnmpTrapRecCommunity OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SNMP trap receiver community"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgSnmpTrapRecTableEntry 3 }

mbgLtNgCfgSnmpTrapRecVersion OBJECT-TYPE
    SYNTAX      INTEGER{ v1(1), v2c(2), v3(3) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SNMP trap receiver version"
    DEFVAL { 1 }
    ::= { mbgLtNgCfgSnmpTrapRecTableEntry 4 }

mbgLtNgCfgSnmpReadCommunity OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "read community for SNMPv1 and SNMPv2c"
    DEFVAL { "****" }
    ::= { mbgLtNgCfgSNMP 2 }

mbgLtNgCfgSnmpWriteCommunity OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "read community for SNMPv1 and SNMPv2c"
    DEFVAL { "****" }
    ::= { mbgLtNgCfgSNMP 3 }

mbgLtNgCfgSnmpContact OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SNMP contact string for Lantime"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgSNMP 4 }

mbgLtNgCfgSnmpLocation OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "SNMP location string for Lantime"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgSNMP 5 }

mbgLtNgCfgSnmpV3UserName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "username for SNMPv3"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgSNMP 6 }

mbgLtNgCfgSnmpV3UserRights OBJECT-TYPE
    SYNTAX      INTEGER{
      readonly(0),
      readwrite(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "privacy protocol for SNMPv3"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgSNMP 7 }

mbgLtNgCfgSnmpV3Context OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "context string for SNMPv3"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgSNMP 8 }

mbgLtNgCfgSnmpV3SecurityLevel OBJECT-TYPE
    SYNTAX      INTEGER{
      noAuthNoPriv(0),
      authNoPriv(1),
      authPriv(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "authentication level for SNMPv3"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgSNMP 9 }

mbgLtNgCfgSnmpV3AuthProtocol OBJECT-TYPE
    SYNTAX      INTEGER{
      md5(0),
      sha(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "authentication protocol for SNMPv3"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgSNMP 10 }

mbgLtNgCfgSnmpV3AuthPassphrase OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "authentication passphrase for SNMPv3"
    DEFVAL { "****" }
    ::= { mbgLtNgCfgSNMP 11 }

mbgLtNgCfgSnmpV3PrivProtocol OBJECT-TYPE
    SYNTAX      INTEGER{
      des(0),
      aes(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "privacy protocol for SNMPv3"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgSNMP 12 }

mbgLtNgCfgSnmpV3PrivPassphrase OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "privacy passphrase for SNMPv3"
    DEFVAL { "****" }
    ::= { mbgLtNgCfgSNMP 13 }

mbgLtNgCfgSnmpRetries OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "number of retries for sending traps"
    DEFVAL { 3 }
    ::= { mbgLtNgCfgSNMP 14 }

mbgLtNgCfgSnmpTimeout OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "sec"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "timeout for sending traps (in seconds)"
    DEFVAL { 3 }
    ::= { mbgLtNgCfgSNMP 15 }

mbgLtNgCfgSnmpEnabledVersion OBJECT-TYPE
    SYNTAX INTEGER{
      v1ANDv2c(0),
      v3only(1),
      v1ANDv2cANDv3(2)
    }  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "currently enabled SNMP version"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgSNMP 16 }


-- Wallmount display


mbgLtNgCfgWalldisplay     OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 4 }

mbgLtNgCfgVP100Display1Addr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "address of wall display (ip or hostname)"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgWalldisplay 1 }

mbgLtNgCfgVP100Display1SN OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "serial number of first VP100 wall display"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgWalldisplay 2 }

mbgLtNgCfgVP100Display2Addr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "address of wall display (ip or hostname)"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgWalldisplay 3 }

mbgLtNgCfgVP100Display2SN OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "serial number of second VP100 wall display"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgWalldisplay 4 }


-- ntp client monitoring 


mbgLtNgCfgNtpClientMonitoring     OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 5 }

mbgLtNgCfgNtpMaxClientOffset OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "ms"
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "max NTP client offset limit in milliseconds"
    DEFVAL { 10 }
    ::= { mbgLtNgCfgNtpClientMonitoring 1 }

mbgLtNgCfgNtpMaxClientStratum OBJECT-TYPE
    SYNTAX Unsigned32(1..16)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "max NTP client stratum level"
    DEFVAL { 10 }
    ::= { mbgLtNgCfgNtpClientMonitoring 2 }

-- trap trigger

mbgLtNgCfgTrapTrigger     OBJECT IDENTIFIER ::= { mbgLtNgCfgNotifications 6 }

mbgLtNgCfgTrapNormalOperation OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "string containing signaling information ( comma-separated ); use the following aliases to set params:
        Email	-> email
        Wmail	-> wmail
        Snmp	-> snmp
        VP100	-> disp
        User	-> own
        Alarm	-> led
        Relay	-> relais
        Following string is perfectly valid to enable signaling for SNMP and Email: 'snmp,email'.
        Please note that some objects do not suppurt relay and led but this is announced at each MIB object itself.
        This object, for example, does not support them."
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 1 }

mbgLtNgCfgTrapNtpNotSync OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 2 }

mbgLtNgCfgTrapNtpSync OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 3 }

mbgLtNgCfgTrapNtpStopped OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 4 }

mbgLtNgCfgTrapServerBoot OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 5 }

mbgLtNgCfgTrapRefclockNotResponding OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 6 }

mbgLtNgCfgTrapRefclockSynchronized OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 7 }

mbgLtNgCfgTrapRefclockNotSynchronized OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 8 }

mbgLtNgCfgTrapSecRefclockNotResponding OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 9 }

mbgLtNgCfgTrapSecRefclockSynchronized OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 10 }

mbgLtNgCfgTrapSecRefclockNotSynchronized OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 11 }

mbgLtNgCfgTrapAntennaFaulty OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 12 }

mbgLtNgCfgTrapAntennaReconnect OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 13 }

mbgLtNgCfgTrapAntennaShortCircuit OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 14 }

mbgLtNgCfgTrapConfigChanged OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 15 }

mbgLtNgCfgTrapLeapSecAnnounced OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 16 }

mbgLtNgCfgTrapNtpClientLimitExceeded OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 17 }

mbgLtNgCfgTrapRefSrcLimitExceeded OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 18 }

mbgLtNgCfgTrapRefSrcDisconnected OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 19 }

mbgLtNgCfgTrapRefSrcReconnected OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 20 }

mbgLtNgCfgTrapShsTimeLimitError OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 21 }

mbgLtNgCfgTrapShsTimeLimitWarning OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 22 }

mbgLtNgCfgTrapNetworkDown OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 23 }

mbgLtNgCfgTrapNetworkUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 24 }

mbgLtNgCfgTrapPowerSupplyUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 25 }

mbgLtNgCfgTrapPowerSupplyDown OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 26 }

mbgLtNgCfgTrapFdmError OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 27 }

mbgLtNgCfgTrapLowSystemResources OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 28 }

mbgLtNgCfgTrapPtpNetworkDown OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 29 }

mbgLtNgCfgTrapPtpNetworkUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 30 }

mbgLtNgCfgTrapPtpStateChanged OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 31 }

mbgLtNgCfgTrapPtpError OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 32 }

mbgLtNgCfgTrapFanDown OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 33 }

mbgLtNgCfgTrapFanUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 34 }

mbgLtNgCfgRepeatEvent OBJECT-TYPE
    SYNTAX INTEGER{ never(0), everyMinute(1), everyHour(2), everyDay(3) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "when to send last error trap message again"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgTrapTrigger 35 }

mbgLtNgCfgRepetitions OBJECT-TYPE
    SYNTAX Unsigned32(0..50)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "how often do you want to resend an error trap"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgTrapTrigger 36 }

mbgLtNgCfgTrapWarmedUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 37 }

mbgLtNgCfgTrapNotWarmedUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgTrapTrigger 38 }

--
-- security
--

mbgLtNgCfgSecurity        OBJECT IDENTIFIER ::= { mbgLtNgConfig 2 }

-- login and access

mbgLtNgCfgLoginAccess        OBJECT IDENTIFIER ::= { mbgLtNgCfgSecurity 0 }

mbgLtNgCfgDisableRootLogin OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "do not allow user 'root' to login"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgLoginAccess 1 }

mbgLtNgCfgAllowNetworkDiscovery OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "allow LANTIME to be discovered via network mdns"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgLoginAccess 2 }

-- front panel

mbgLtNgCfgFrontPanel        OBJECT IDENTIFIER ::= { mbgLtNgCfgSecurity 1 }

mbgLtNgCfgLockFrontPanel OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "do not allow usage of the front panel"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgFrontPanel 1 }

mbgLtNgCfgDisableUsbPort OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "do not allow usage of front USB port"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgFrontPanel 2 }

-- ssh

mbgLtNgCfgSsh        OBJECT IDENTIFIER ::= { mbgLtNgCfgSecurity 2 }

mbgLtNgCfgSshKeyLength OBJECT-TYPE
    SYNTAX Unsigned32(768|1024|2048|4096|8192|16384|32768)
    UNITS "bits"
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "ssh key length in bits"
    DEFVAL { 1024 }
    ::= { mbgLtNgCfgSsh 1 }

mbgLtNgCfgSshShellTimeout OBJECT-TYPE
    SYNTAX Unsigned32(0|60|120|300|600|3600|10800|18000|86400)
    UNITS "seconds"
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "ssh shell timeout in seconds"
    DEFVAL { 300 }
    ::= { mbgLtNgCfgSsh 2 }


--
-- NTP page
--
mbgLtNgCfgNtp        OBJECT IDENTIFIER  ::= { mbgLtNgConfig 3 }

-- Phil start
mbgLtNgCfgNtpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgCfgNtpTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of configured, external NTP servers"
    ::= { mbgLtNgCfgNtp 1 }


mbgLtNgCfgNtpTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgCfgNtpTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to a configured,external NTP server"
    INDEX { mbgLtNgCfgNtpIndex }
    ::= { mbgLtNgCfgNtpTable 1 }


MbgLtNgCfgNtpTableEntry ::=
    SEQUENCE {
        mbgLtNgCfgNtpIndex     Unsigned32,
        mbgLtNgCfgNtpServerIP DisplayString,
        mbgLtNgCfgNtpServerKey Unsigned32,
        mbgLtNgCfgNtpServerAutokey MeinbergSwitch,
        mbgLtNgCfgNtpServerMinpoll Unsigned32,
        mbgLtNgCfgNtpServerMaxpoll Unsigned32,
        mbgLtNgCfgNtpServerIburst MeinbergSwitch
      }

mbgLtNgCfgNtpIndex OBJECT-TYPE
    SYNTAX Unsigned32(1..7)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index (and no.) of external NTP server"
    ::= { mbgLtNgCfgNtpTableEntry 1 }

mbgLtNgCfgNtpServerIP OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "ip address for external NTP server"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgNtpTableEntry 2 }

mbgLtNgCfgNtpServerKey OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "key for external NTP server"
    ::= { mbgLtNgCfgNtpTableEntry 3 }

mbgLtNgCfgNtpServerAutokey OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "is autokey enabled for the external NTP server"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtpTableEntry 4 }

mbgLtNgCfgNtpServerMinpoll OBJECT-TYPE
    SYNTAX Unsigned32(4..10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "is autokey enabled for the external NTP server"  
    DEFVAL { 6 }
    ::= { mbgLtNgCfgNtpTableEntry 5 }

mbgLtNgCfgNtpServerMaxpoll OBJECT-TYPE
    SYNTAX Unsigned32(4..10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "is autokey enabled for the external NTP server"
    DEFVAL { 6 }
    ::= { mbgLtNgCfgNtpTableEntry 6 }

mbgLtNgCfgNtpServerIburst OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "is autokey enabled for the external NTP server"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtpTableEntry 7 }

--- broad- and manycast mode
mbgLtNgCfgNtpBMTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgCfgNtpBMTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of configured, external NTP servers"
    ::= { mbgLtNgCfgNtp 2 }

mbgLtNgCfgNtpBMTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgCfgNtpBMTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of objects pertaining to an interface and concerning broad-, multi- and manycast"
    INDEX { mbgLtNgCfgNtpBMIndex }
    ::= { mbgLtNgCfgNtpBMTable 1 }


MbgLtNgCfgNtpBMTableEntry ::=
    SEQUENCE {
        mbgLtNgCfgNtpBMIndex     Unsigned32,
        mbgLtNgCfgNtpBroadAddr  DisplayString,
        mbgLtNgCfgNtpBroadSymKey Unsigned32,
        mbgLtNgCfgNtpBroadInterval Unsigned32,
        mbgLtNgCfgNtpBroadUseAutokey MeinbergSwitch
      }

mbgLtNgCfgNtpBMIndex OBJECT-TYPE
    SYNTAX Unsigned32(0..16)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index of interface concerning different NTP modes"
    ::= { mbgLtNgCfgNtpBMTableEntry 1 }

--- broadcast

mbgLtNgCfgNtpBroadAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "address for NTP broadcast mode"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgNtpBMTableEntry 2 }

mbgLtNgCfgNtpBroadSymKey OBJECT-TYPE
    SYNTAX Unsigned32(0..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "symmetric key number for broadcast"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtpBMTableEntry 3 }

mbgLtNgCfgNtpBroadInterval OBJECT-TYPE
    SYNTAX Unsigned32(0..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "NTP broadcast interval on specific interval"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtpBMTableEntry 4 }

mbgLtNgCfgNtpBroadUseAutokey OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "use autokey for broadcast"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtpBMTableEntry 5 }

---multicast

mbgLtNgCfgNtpEnableMulticast OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "enable or disable multicast mode"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 3 }

mbgLtNgCfgNtpMultiAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "address for NTP multicast mode"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgNtp 4 }

mbgLtNgCfgNtpMultiInterval OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "NTP multicast interval on specific interval"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 5 }

mbgLtNgCfgNtpMultiSymKey OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "symmetric key number for multicast"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 6 }

mbgLtNgCfgNtpMultiUseAutokey OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "use autokey for multicast"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 7 }

-- manycast

mbgLtNgCfgNtpEnableManycast OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "enable or disable manycast mode for this interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 8 }

mbgLtNgCfgNtpManyAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "address for NTP manycast mode"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgNtp 9 }

mbgLtNgCfgNtpManySymKey OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "symmetric key number for manycast"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 11 }

mbgLtNgCfgNtpManyUseAutokey OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "use autokey for manycast"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 12 }

-- general

mbgLtNgCfgNtpLocalClkStratum OBJECT-TYPE
    SYNTAX Unsigned32(1..16)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "stratum of local clock"
    DEFVAL { 12 }
    ::= { mbgLtNgCfgNtp 13 }

mbgLtNgCfgNtpDisableLocalClk OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "disable local clock"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 14 }

mbgLtNgCfgNtpSpoofLocalTime OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
         "NTP outputs local time instead of UTC; see mbgLtNgCfgNtpTimeScale"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 15 }

mbgLtNgCfgNtpLocalTrustedKeys OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "local trusted key"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgNtp 16 }

mbgLtNgCfgNtpTrusttime OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "accept async reference clock for this amount of time in seconds"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 17 }

mbgLtNgCfgNtpTimeScale OBJECT-TYPE
    SYNTAX INTEGER
            {
              utc(0),
              local(1)
            }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "timescale"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 18 }

mbgLtNgCfgNtpEnableClientCounter OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "enable NTP request client counting"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 19 }

mbgLtNgCfgNtpEnableClientCounterDuration OBJECT-TYPE
    SYNTAX Integer32(0..2147483647)
    UNITS "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "NTP client counter duration in seconds; 0 means continuously"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgNtp 20 }

--
-- PTP page
--
mbgLtNgCfgPtp        OBJECT IDENTIFIER ::= { mbgLtNgConfig 4 }

mbgLtNgCfgPtpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MbgLtNgCfgPtpTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a table of PTPv2 related configurtion variables"
    ::= { mbgLtNgCfgPtp 1 }

mbgLtNgCfgPtpTableEntry OBJECT-TYPE
    SYNTAX MbgLtNgCfgPtpTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
         "a list of configuration objects pertaining to a PTPv2 module"
    INDEX { mbgLtNgCfgPtpIndex }
    ::= { mbgLtNgCfgPtpTable 1 }

MbgLtNgCfgPtpTableEntry ::=
    SEQUENCE {
	      mbgLtNgCfgPtpIndex            Unsigned32,
	      mbgLtNgCfgPtpHostname         DisplayString,
	      mbgLtNgCfgPtpDomainname       DisplayString,
	      mbgLtNgCfgPtpNameserver1      DisplayString,
	      mbgLtNgCfgPtpNameserver2      DisplayString,
	      mbgLtNgCfgPtpIpv4             DisplayString,
	      mbgLtNgCfgPtpNetmask          DisplayString,
	      mbgLtNgCfgPtpGateway          DisplayString,
	      mbgLtNgCfgPtpEnableVlan       MeinbergSwitch,
	      mbgLtNgCfgPtpVlanId           Unsigned32,
	      mbgLtNgCfgPtpVlanPriority     Unsigned32,
	      mbgLtNgCfgPtpEnableDhcp       MeinbergSwitch,
	      mbgLtNgCfgPtpMode             INTEGER,
	      mbgLtNgCfgPtpDelayMechanism   INTEGER,
	      mbgLtNgCfgPtpNetworkProtocol  INTEGER,
	      mbgLtNgCfgPtpDomainNumber     Unsigned32,
	      mbgLtNgCfgPtpPriority1        Unsigned32,
	      mbgLtNgCfgPtpPriority2        Unsigned32,
	      mbgLtNgCfgPtpSyncInterval     Integer32,
	      mbgLtNgCfgPtpAnnounceInterval Integer32,
	      mbgLtNgCfgPtpDelayReqInterval Integer32,
	      mbgLtNgCfgPtpTimescale        INTEGER,
          mbgLtNgCfgPtpIpv6Avail        INTEGER,
          mbgLtNgCfgPtpIpv6Mode         INTEGER,
          mbgLtNgCfgPtpIpv6Address      DisplayString,
          mbgLtNgCfgPtpIpv6McastScope   INTEGER,
          mbgLtNgCfgPtpDisableSsh       INTEGER,
          mbgLtNgCfgPtpDscpClass        Unsigned32,
          mbgLtNgCfgPtpMcastTtl         Unsigned32,
          mbgLtNgCfgPtpOpMode           INTEGER,
          mbgLtNgCfgPtpProfile          INTEGER,
          mbgLtNgCfgPtpHybridMode       MeinbergSwitch,
          mbgLtNgCfgPtpUcastMstAddr     DisplayString,
          mbgLtNgCfgPtpAnnRcptTmout     Unsigned32,
          mbgLtNgCfgPtpMessageDuration  Unsigned32,
          mbgLtNgCfgPtpSyncEAvail       INTEGER,
          mbgLtNgCfgPtpSyncEEnabled     INTEGER,
          mbgLtNgCfgPtpSyncEQltLvlSelEnable INTEGER,
          mbgLtNgCfgPtpSyncESdhNwOption INTEGER,
          mbgLtNgCfgPtpSyncEInputSsm    INTEGER,
          mbgLtNgCfgPtpSyncEOutputSsm   INTEGER,
          mbgLtNgCfgPtpSyncEGbitCopperMode INTEGER,
          mbgLtNgCfgPtpMiscEnable1Step  INTEGER,
          mbgLtNgCfgPtpDisableMgmtMsgs  INTEGER,
          mbgLtNgCfgPtpOutput1          INTEGER,
          mbgLtNgCfgPtpOutput2          INTEGER
      }

mbgLtNgCfgPtpIndex OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
       "index for PTPv2 module"
    ::= { mbgLtNgCfgPtpTableEntry 1 }


-- network section


mbgLtNgCfgPtpHostname OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "network hostname"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 2 }

mbgLtNgCfgPtpDomainname OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "network domain"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 3 }

mbgLtNgCfgPtpNameserver1 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "ethernet nameserver for hostname resolving"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 4 }

mbgLtNgCfgPtpNameserver2 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "ethernet nameserver for hostname resolving"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 5 }

mbgLtNgCfgPtpIpv4 OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "ip address"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 6 }

mbgLtNgCfgPtpNetmask OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "netmask"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 7 }

mbgLtNgCfgPtpGateway OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "default gateway"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 8 }

mbgLtNgCfgPtpEnableVlan OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Enable VLAN if it is supported"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 9 }

mbgLtNgCfgPtpVlanId OBJECT-TYPE
    SYNTAX Unsigned32(0..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "VLAN id ranges from 0-4096"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 10 }

mbgLtNgCfgPtpVlanPriority OBJECT-TYPE
    SYNTAX Unsigned32(0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "VLAN priority ranges from 0-7"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 11 }

mbgLtNgCfgPtpEnableDhcp OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Enable DCHP for PTPv2 module"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 12 }

mbgLtNgCfgPtpIpv6Avail OBJECT-TYPE
    SYNTAX INTEGER{
        no(0),
        yes(1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "Is IPv6 supported?"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 23 }

mbgLtNgCfgPtpIpv6Mode OBJECT-TYPE
    SYNTAX INTEGER{
        static(0),
        ra(1),
        dhcp(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "IPv6 addressing mode"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 24 }

mbgLtNgCfgPtpIpv6Address OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "IPv6 address if supported, else n/a"
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 25 }

mbgLtNgCfgPtpIpv6McastScope OBJECT-TYPE
    SYNTAX INTEGER{
        intfLocal(1),
        linkLocal(2),
        realmLocal(3),
        adminLocal(4),
        siteLocal(5),
        orgaLocal(8),
        globalScope(14)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Multicast scope. See RFC 7346 and RFC 4291"
    DEFVAL { 1 }
    ::= { mbgLtNgCfgPtpTableEntry 26 }

mbgLtNgCfgPtpDisableSsh OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Disable SSH for PTP port"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 27 }

mbgLtNgCfgPtpDscpClass OBJECT-TYPE
    SYNTAX Unsigned32(0..64)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "DSCP classification value ranges from 0-64"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 28 }

mbgLtNgCfgPtpMcastTtl OBJECT-TYPE
    SYNTAX Unsigned32(0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Multicast TTL value ranges from 0-255"
    DEFVAL { 5 }
    ::= { mbgLtNgCfgPtpTableEntry 29 }


-- global section


mbgLtNgCfgPtpMode OBJECT-TYPE
    SYNTAX INTEGER {
      multicastSlave(0),
      unicastSlave(1),
      multicastMaster(2),
      unicastMaster(3),
      multicastAuto(4),
      bothMaster(5),
      ntpServer(6),
      ntpClient(7)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "PTP mode"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 13 }

mbgLtNgCfgPtpDelayMechanism OBJECT-TYPE
    SYNTAX INTEGER{
      e2e(0),
      p2p(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "how to calculate delay mechanism"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 14 }

mbgLtNgCfgPtpNetworkProtocol OBJECT-TYPE
    SYNTAX INTEGER{
      reserved(0),
      udpIpv4(1),
      udpIpv6(2),
      ieee8023(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "how to calculate delay mechanism"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 15 }

mbgLtNgCfgPtpDomainNumber OBJECT-TYPE
    SYNTAX Unsigned32(0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "ptp domain membership"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 16 }

mbgLtNgCfgPtpPriority1 OBJECT-TYPE
    SYNTAX Unsigned32(0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "ptp user defined major priority"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 17 }

mbgLtNgCfgPtpPriority2 OBJECT-TYPE
    SYNTAX Unsigned32(0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "ptp user defined minor priority"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 18 }

mbgLtNgCfgPtpSyncInterval OBJECT-TYPE
    SYNTAX Integer32(-7..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "value is defined as power of 2;
          for example:
             2 = one message every 4 seconds,
            -2 = 4 messages every second"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 19 }

mbgLtNgCfgPtpAnnounceInterval OBJECT-TYPE
    SYNTAX Integer32(-7..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "see 'mbgLtNgCfPtpSyncInterval' for explanation"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 20 }

mbgLtNgCfgPtpDelayReqInterval OBJECT-TYPE
    SYNTAX Integer32(-7..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "see 'mbgLtNgCfPtpSyncInterval' for explanation"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 21 }

mbgLtNgCfgPtpTimescale OBJECT-TYPE
    SYNTAX INTEGER{
      arbitrary(0),
      ptp(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "see 'mbgLtNgCfPtpSyncInterval' for explanation"
    DEFVAL { 1 }
    ::= { mbgLtNgCfgPtpTableEntry 22 }

mbgLtNgCfgPtpOpMode OBJECT-TYPE
    SYNTAX INTEGER {
        ptp(0),
        ntp(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "General PTP operation mode"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 30 }

mbgLtNgCfgPtpProfile OBJECT-TYPE
    SYNTAX INTEGER {
        custom(0),
        defE2eIeee15882008(1),
        defP2pIeee15882008(2),
        powIeeeC37238(3),
        telItuTG82651(4),
        telItuTG82751(5),
        smpteSt20592(6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "PTP profile"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 31 }

mbgLtNgCfgPtpHybridMode OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Run card in hybrid mode"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 32 }

mbgLtNgCfgPtpUcastMstAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "IP address of unicast master
         when in slave mode. Only 1!!!
         is shown and can be set."
    DEFVAL { "n/a" }
    ::= { mbgLtNgCfgPtpTableEntry 33 }

mbgLtNgCfgPtpAnnRcptTmout OBJECT-TYPE
    SYNTAX Unsigned32(2..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Timeout for announce messages"
    DEFVAL { 3 }
    ::= { mbgLtNgCfgPtpTableEntry 34 }

mbgLtNgCfgPtpMessageDuration OBJECT-TYPE
    SYNTAX Unsigned32(10..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Time period until master stops
          sending messages [s]"
    DEFVAL { 60 }
    ::= { mbgLtNgCfgPtpTableEntry 35 }


--- Sync E section


mbgLtNgCfgPtpSyncEAvail OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "Is SyncE supported?"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 36 }

mbgLtNgCfgPtpSyncEEnabled OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Is Sync-E enabled if supported?"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 37 }

mbgLtNgCfgPtpSyncEQltLvlSelEnable OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Enable quality selection?"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 38 }

mbgLtNgCfgPtpSyncESdhNwOption OBJECT-TYPE
    SYNTAX INTEGER {
        opt1(0),
        opt2(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Sdh network option"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 39 }

mbgLtNgCfgPtpSyncEInputSsm OBJECT-TYPE
    SYNTAX INTEGER {
        stuUkn(0),
        prs(1),
        prc(2),
        inv3(3),
        ssuATnc(4),
        inv5(5),
        inv6(6),
        st2(7),
        ssuB(8),
        inv9(9),
        eec2St3(10),
        eec1Sec(11),
        smc(12),
        st3e(13),
        prov(14),
        dnuDus(15)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Input SSMs combied for both options.
          You should be aware of using which code when."
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 40 }

mbgLtNgCfgPtpSyncEOutputSsm OBJECT-TYPE
    SYNTAX INTEGER {
        stuUkn(0),
        prs(1),
        prc(2),
        inv3(3),
        ssuATnc(4),
        inv5(5),
        inv6(6),
        st2(7),
        ssuB(8),
        inv9(9),
        eec2St3(10),
        eec1Sec(11),
        smc(12),
        st3e(13),
        prov(14),
        dnuDus(15)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Input SSMs combined for both options.
          You should be aware of using which code when."
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 41 }


mbgLtNgCfgPtpSyncEGbitCopperMode OBJECT-TYPE
    SYNTAX INTEGER {
        auto(0),
        forceSyncEAuto(1),
        forceOrIsMaster(2),
        forceOrIsSlave(3),
        preferMaster(4),
        preferSlave(5)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Gigabit copper modes"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 42 }


--- Misc


mbgLtNgCfgPtpMiscEnable1Step OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Enable PTP 1 step if supported"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 43 }

mbgLtNgCfgPtpDisableMgmtMsgs OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Disable management messages if suppported"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 44 }


--- Outputs


mbgLtNgCfgPtpOutput1 OBJECT-TYPE
    SYNTAX INTEGER {
        off(0),
        pps(1),
        mhz10(2),
        khzGPS2048(3),
        mhzGPS10(4),
        ppsGPS(5)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Additional I/O output if suppported"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 45 }

mbgLtNgCfgPtpOutput2 OBJECT-TYPE
    SYNTAX INTEGER {
        off(0),
        pps(1),
        mhz10(2),
        khzGPS2048(3),
        mhzGPS10(4),
        ppsGPS(5)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Additional I/O output if suppported"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtpTableEntry 46 }

mbgLtNgCfgPtpCmd OBJECT-TYPE
    SYNTAX INTEGER{
        none(0),
        configure(1),
        reset(2),
        apply(3)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
         "Configuration commands"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgPtp 2 }

--
-- System page
--
mbgLtNgCfgSystem        OBJECT IDENTIFIER ::= { mbgLtNgConfig 5 }

-- general
mbgLtNgCfgGeneral        OBJECT IDENTIFIER ::= { mbgLtNgCfgSystem 0 }

mbgLtNgCfgWebLanguage OBJECT-TYPE
    SYNTAX INTEGER{ notAvailable(0), englisch(1), german(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "set language for web interface"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgGeneral 1 }

mbgLtNgCfgActivateChangesAsStartup OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "activate changes automatically as startup configuration"
    DEFVAL { 1 }
    ::= { mbgLtNgCfgGeneral 2 }

-- front display

mbgLtNgCfgDisplay        OBJECT IDENTIFIER ::= { mbgLtNgCfgSystem 1 }

mbgLtNgCfgEnableFrontPanelLight OBJECT-TYPE
    SYNTAX MeinbergSwitch
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "active light at front panel"
    DEFVAL { 0 }
    ::= { mbgLtNgCfgDisplay 1 }


--
-- Lantime system modus 
--
-- mbgLtNgCfgReceiver        OBJECT IDENTIFIER ::= { mbgLtNgConfig 8 }
-- MRS settings etc....



--
-- Lantime SNMP commands
--

mbgLtNgCommands        OBJECT IDENTIFIER  ::= { mbgLantimeNG 2 }

mbgLtNgCmdExecute OBJECT-TYPE
    SYNTAX  INTEGER {
      none(0),
      applyChanges(1),
      saveChanges(2),
      saveAndApplyChanges(3),
      startFirmwareUpdate(4),
      reboot(5),
      resendErrorConditions(6),
      sendTestNotifications(7)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Send a command to the timeserver to be executed;
         Attention: Command should be executed with a timeout of 120 seconds and 0 retries"
    DEFVAL { 0 }
    ::={ mbgLtNgCommands 1 }

mbgLtNgCmdSetTime OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
            "Reference time can be set via a date-time string in format:
             yyyy-mm-dd hh:mm:ss
             Time is interpreted as configured via web interface at menu:
             'Receiver'->'Time Zone'
             It is mandatory to unplug the receiver's antenna to make this work.
             and strongly advised to execute a SNMPSET WITHOUT retries
             and a timeout value greater than 60 seconds. Otherwise
             there might come up unforeseen issues.
             SNMPGET always returns default value."
    DEFVAL { "n/a" }
    ::={ mbgLtNgCommands 2 }


--
-- Lantime SNMP trap definitions
--
mbgLtNgTrapNotifications      OBJECT IDENTIFIER  ::= { mbgLantimeNG 3 }

mbgLtNgTraps      OBJECT IDENTIFIER  ::= { mbgLtNgTrapNotifications 0 }

mbgLtNgTrapNTPNotSync NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when NTP is not synchronised "
    ::= { mbgLtNgTraps 1 }

mbgLtNgTrapNTPStopped NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when NTP is stopped "
    ::= { mbgLtNgTraps 2 }

mbgLtNgTrapServerBoot NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when time server has finished boot sequence "
    ::= { mbgLtNgTraps 3 }

mbgLtNgTrapReceiverNotResponding NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when receiver is not responding "
    ::= { mbgLtNgTraps 4 }

mbgLtNgTrapReceiverNotSync NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when receiver is not synchronised "
    ::= { mbgLtNgTraps 5 }

mbgLtNgTrapAntennaFaulty NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when connection to antenna is broken "
    ::= { mbgLtNgTraps 6 }

mbgLtNgTrapAntennaReconnect NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when antenna has been reconnected "
    ::= { mbgLtNgTraps 7 }

mbgLtNgTrapConfigChanged NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when timeserver reloaded its configuration "
    ::= { mbgLtNgTraps 8 }

mbgLtNgTrapLeapSecondAnnounced NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a leap second has been announced "
    ::= { mbgLtNgTraps 9 }

mbgLtNgTrapSHSTimeLimitError NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when SHS timelimit exceeded "
    ::= { mbgLtNgTraps 10 }

mbgLtNgTrapSecondaryRecNotSync NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when secondary receiver in SHS system is not synchronised "
    ::= { mbgLtNgTraps 11 }

mbgLtNgTrapPowerSupplyFailure NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when one of the redundant power supplies fails"
    ::= { mbgLtNgTraps 12 }

mbgLtNgTrapAntennaShortCircuit NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a connected antenna fails due to a short circuit"
    ::= { mbgLtNgTraps 13 }

mbgLtNgTrapReceiverSync NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when receiver is synchronised "
    ::= { mbgLtNgTraps 14 }

mbgLtNgTrapNTPClientAlarm NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable. "
    ::= { mbgLtNgTraps 15 }

mbgLtNgTrapPowerSupplyUp NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a power supply returned to a healthy state. "
    ::= { mbgLtNgTraps 16 }

mbgLtNgTrapNetworkDown NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a monitored network port is down. "
    ::= { mbgLtNgTraps 17 }

mbgLtNgTrapNetworkUp NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a monitored network port is up. "
    ::= { mbgLtNgTraps 18 }

mbgLtNgTrapSecondaryRecNotResp NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when secondary receiver is not responding "
    ::= { mbgLtNgTraps 19 }


mbgLtNgTrapXmrLimitExceeded NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a reference offset exceeds the configured limit"
    ::= { mbgLtNgTraps 30 }

mbgLtNgTrapXmrRefDisconnect NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a reference signal has been lost"
    ::= { mbgLtNgTraps 31 }


mbgLtNgTrapXmrRefReconnect NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a reference signal recovered"
    ::= { mbgLtNgTraps 32 }

mbgLtNgTrapFdmError NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when the Fdm module generates an alarm "
    ::= { mbgLtNgTraps 33 }

mbgLtNgTrapSHSTimeLimitWarning NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when SHS warning limit exceeded "
    ::= { mbgLtNgTraps 34 }

mbgLtNgTrapSecondaryRecSync NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when secondary receiver is synchronised "
    ::= { mbgLtNgTraps 35 }

mbgLtNgTrapNTPSync NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when NTP is synchronised "
    ::= { mbgLtNgTraps 36 }

mbgLtNgTrapPtpPortDisconnected NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when PTP network port got disconnected"
    ::= { mbgLtNgTraps 37 }

mbgLtNgTrapPtpPortConnected NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when PTP network port got connected"
    ::= { mbgLtNgTraps 38 }

mbgLtNgTrapPtpStateChanged NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when PTP state changed (e.g. from 'passive' to 'master')"
    ::= { mbgLtNgTraps 39 }

mbgLtNgTrapPtpError NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when PTP raised an error"
    ::= { mbgLtNgTraps 40 }

mbgLtNgTrapLowSystemResources NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when system is running on low resources"
    ::= { mbgLtNgTraps 41 }

mbgLtNgTrapFanDown NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when fan goes down"
    ::= { mbgLtNgTraps 45 }

mbgLtNgTrapFanUp NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when fan comes up"
    ::= { mbgLtNgTraps 46 }

mbgLtNgTrapCertificateExpired NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when certificate expired or will expire"
    ::= { mbgLtNgTraps 47 }

mbgLtNgTrapSufficientSystemResources NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when system has regained sufficient resources"
    ::= { mbgLtNgTraps 48 }

mbgLtNgTrapOscillatorWarmedUp NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when oscillator is not warmed up"
    ::= { mbgLtNgTraps 49 }

mbgLtNgTrapOscillatorNotWarmedUp NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when oscillator is warmed up"
    ::= { mbgLtNgTraps 50 }

mbgLtNgTrapXmrRefChanged NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when XMR reference source changed"
    ::= { mbgLtNgTraps 51 }

mbgLtNgTrapClusterMasterChanged NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when cluster mode is active and cluster changed"
    ::= { mbgLtNgTraps 52 }

mbgLtNgTrapClusterFalsetickerDetected NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when cluster mode is active and
         a cluster member is dectected as falseticker"
    ::= { mbgLtNgTraps 53 }

mbgLtNgTrapClusterFalsetickerCleared NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when cluster mode is active and
         a cluster member is no longer a falseticker"
    ::= { mbgLtNgTraps 54 }

mbgLtNgTrapSHSTimeLimitOk NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when SHS timelimit error has
         been acknowledged or time difference drops
         below warning limit."
    ::= { mbgLtNgTraps 55 }

mbgLtNgTrapIMSError NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when an IMS module is not
         responsive anymore, has got temperature issues,
         etc. ..."
    ::= { mbgLtNgTraps 56 }

mbgLtNgTrapIMSOk NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when an IMS module returns
         to healthy state."
    ::= { mbgLtNgTraps 57 }

mbgLtNgTrapFDMOk NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when an FDM module returns
         to healthy state."
    ::= { mbgLtNgTraps 58 }

mbgLtNgTrapNTPOffsetLimitExceeded NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when monitoring an NTP client and its
         offset limit is exceeded"
    ::= { mbgLtNgTraps 59 }

mbgLtNgTrapNTPOffsetLimitOk NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when monitoring an NTP client and its
         offset limit is back again in a valid range"
    ::= { mbgLtNgTraps 60 }

mbgLtNgTrapNormalOperation NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when the system returned to a healthy state "
    ::= { mbgLtNgTraps 77 }

mbgLtNgTrapHeartbeat NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent periodically to indicate that time server is still alive "
    ::= { mbgLtNgTraps 88 }

mbgLtNgTrapTestNotification NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION
        "trap to be sent when a test notification has been requested "
    ::= { mbgLtNgTraps 99 }

mbgLtNgTrapMessage  OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "used as a payload object for all traps, holds a clear text event message"
        DEFVAL { "no event" }
        ::= { mbgLtNgTraps 100 }

-- conformance and other stuff

mbgLtNgConformance        OBJECT IDENTIFIER ::= { mbgLantimeNG 90 }
mbgLtNgCompliances                OBJECT IDENTIFIER ::= { mbgLtNgConformance 1 }
mbgLtNgGroups                     OBJECT IDENTIFIER ::= { mbgLtNgConformance 2 }

mbgLtNgCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION 
                        "The compliance statement for SNMP entities which implement version 2
                        of the LANTIME MIB"
        MODULE  -- this module
                MANDATORY-GROUPS {
                        mbgLtNgObjectsGroup,
                        mbgLtNgTrapsGroup
                }
        ::= { mbgLtNgCompliances 1 }
                

mbgLtNgObjectsGroup       OBJECT-GROUP 
        OBJECTS {
    mbgLtNgSnmpSubagentVersion,
    mbgLtNgFirmwareVersion,
    mbgLtNgSerialNumber,
    mbgLtNgSubagentTimeticks,
    mbgLtNgCpuSerialNumber,
    mbgLtNgNtpCurrentState,
    mbgLtNgNtpStratum,
    mbgLtNgNtpRefclockName,
    mbgLtNgNtpRefclockOffset,
    mbgLtNgNtpVersion,
    mbgLtNgNtpCCStartedAt,
    mbgLtNgNtpCCDuration,
    mbgLtNgNtpCCNumberOfClients,
    mbgLtNgNtpCCTotalRequests,
    mbgLtNgNtpCCTotalRequestsLastHour,
    mbgLtNgNtpCCTotalRequestsLastMinute,
    mbgLtNgNtpCCTotalRequestsCurrentDay,
    mbgLtNgNtpCCTodaysClients,
    mbgLtNgNtpMrsServer,
    mbgLtNgNtpMrsOffset,
    mbgLtNgNumberOfRefclocks,
    mbgLtNgRefclockType,
    mbgLtNgRefclockUsage,
    mbgLtNgRefclockState,
    mbgLtNgRefclockSubstate,
    mbgLtNgRefclockStatusA,
    mbgLtNgRefclockMaxStatusA,
    mbgLtNgRefclockStatusB,
    mbgLtNgRefclockMaxStatusB,
    mbgLtNgRefclockAdditionalInfo,
    mbgLtNgRefclockLeapSecondDate,
    mbgLtNgRefclockGpsLatitude,
    mbgLtNgRefclockGpsLongitude,
    mbgLtNgRefclockGpsTdop,
    mbgLtNgRefclockGpsPdop,
    mbgLtNgRefclockGpsUtcOffset,
    mbgLtNgRefclockGpsAltitude,
    mbgLtNgRefclockTimeDiff,
    mbgLtNgRefclockGpsPos,
	mbgLtNgTrapMessage,
    mbgLtNgNumberOfClusters,
    mbgLtNgClusterCommunicationIp,
    mbgLtNgClusterPortState,
    mbgLtNgClusterMasterSerial,
    mbgLtNgClusterMasterIp,
    mbgLtNgClusterMasterPriority,
    mbgLtNgClusterClockStatus,
    mbgLtNgClusterClockClass,
    mbgLtNgClusterReconfigurationState,
    mbgLtNgClusterIsFalseticker,
    mbgLtNgCfgNtpServerIP,
    mbgLtNgCfgNtpServerKey,
    mbgLtNgCfgNtpServerAutokey,
    mbgLtNgCfgNtpServerMinpoll,
    mbgLtNgCfgNtpServerMaxpoll,
    mbgLtNgCfgNtpServerIburst,
    mbgLtNgCfgNtpBroadAddr,
    mbgLtNgCfgNtpBroadInterval,
    mbgLtNgCfgNtpBroadSymKey,
    mbgLtNgCfgNtpBroadUseAutokey,
    mbgLtNgCfgNtpEnableMulticast,
    mbgLtNgCfgNtpMultiAddr,
    mbgLtNgCfgNtpMultiInterval,
    mbgLtNgCfgNtpMultiSymKey,
    mbgLtNgCfgNtpMultiUseAutokey,
    mbgLtNgCfgNtpEnableManycast,
    mbgLtNgCfgNtpManyAddr,
    mbgLtNgCfgNtpManySymKey,
    mbgLtNgCfgNtpManyUseAutokey,
    mbgLtNgCfgNtpLocalTrustedKeys,
    mbgLtNgCfgNtpTrusttime,
    mbgLtNgCfgNtpTimeScale,
    mbgLtNgCfgNtpLocalClkStratum,
    mbgLtNgCfgNtpDisableLocalClk,
    mbgLtNgCfgNtpSpoofLocalTime,
    mbgLtNgCfgNtpEnableClientCounter,
    mbgLtNgCfgNtpEnableClientCounterDuration,
    mbgLtNgCfgPtpHostname,
    mbgLtNgCfgPtpDomainname,
    mbgLtNgCfgPtpNameserver1,
    mbgLtNgCfgPtpNameserver2,
    mbgLtNgCfgPtpIpv4,
    mbgLtNgCfgPtpNetmask,
    mbgLtNgCfgPtpGateway,
    mbgLtNgCfgPtpEnableVlan,
    mbgLtNgCfgPtpVlanId,
    mbgLtNgCfgPtpVlanPriority,
    mbgLtNgCfgPtpEnableDhcp,
    mbgLtNgCfgPtpIpv6Avail,
    mbgLtNgCfgPtpIpv6Mode,
    mbgLtNgCfgPtpIpv6Address,
    mbgLtNgCfgPtpIpv6McastScope,
    mbgLtNgCfgPtpDisableSsh,
    mbgLtNgCfgPtpDscpClass,
    mbgLtNgCfgPtpMcastTtl,
    mbgLtNgCfgPtpOpMode,
    mbgLtNgCfgPtpMode,
    mbgLtNgCfgPtpHybridMode,
    mbgLtNgCfgPtpUcastMstAddr,
    mbgLtNgCfgPtpProfile,
    mbgLtNgCfgPtpDelayMechanism,
    mbgLtNgCfgPtpNetworkProtocol,
    mbgLtNgCfgPtpDomainNumber,
    mbgLtNgCfgPtpPriority1,
    mbgLtNgCfgPtpPriority2,
    mbgLtNgCfgPtpSyncInterval,
    mbgLtNgCfgPtpAnnounceInterval,
    mbgLtNgCfgPtpDelayReqInterval,
    mbgLtNgCfgPtpTimescale,
    mbgLtNgCfgPtpAnnRcptTmout,
    mbgLtNgCfgPtpMessageDuration,
    mbgLtNgCfgPtpCmd,
    mbgLtNgCfgPtpSyncEAvail,
    mbgLtNgCfgPtpSyncEEnabled,
    mbgLtNgCfgPtpSyncEQltLvlSelEnable,
    mbgLtNgCfgPtpSyncESdhNwOption,
    mbgLtNgCfgPtpSyncEInputSsm,
    mbgLtNgCfgPtpSyncEOutputSsm,
    mbgLtNgCfgPtpSyncEGbitCopperMode,
    mbgLtNgCfgPtpMiscEnable1Step,
    mbgLtNgCfgPtpDisableMgmtMsgs,
    mbgLtNgCfgPtpOutput1,
    mbgLtNgCfgPtpOutput2,
    mbgLtNgCfgEmailTo,
    mbgLtNgEthPortLinkState,
    mbgLtNgCfgEmailFrom,
    mbgLtNgCfgEmailSmarthostAddr,
    mbgLtNgCfgEmailSmarthostPort,
    mbgLtNgCfgEmailSmarthostAuth,
    mbgLtNgCfgEmailSmarthostAuthUser,
    mbgLtNgCfgEmailSmarthostAuthPw,
    mbgLtNgCfgSnmpContact,
    mbgLtNgCfgSnmpLocation,
    mbgLtNgCfgVP100Display1Addr,
    mbgLtNgCfgVP100Display1SN,
    mbgLtNgCfgVP100Display2Addr,
    mbgLtNgCfgVP100Display2SN,
    mbgLtNgCfgEthernetHostname,
    mbgLtNgCfgEthernetDomain,
    mbgLtNgCfgEthernetNameserver1,
    mbgLtNgCfgEthernetNameserver2,
    mbgLtNgCfgEthernetIpv4Gateway,
    mbgLtNgCfgEthernetIpv6Gateway,
    mbgLtNgCfgNumberOfPhysicalIf,
    mbgLtNgCfgNumberOfVirtualIf,
    mbgLtNgCfgPhysicalIfMac,
    mbgLtNgCfgPhysicalIfNetLinkMode,
    mbgLtNgCfgPhysicalIfIndicateLink,
    mbgLtNgCfgPhysicalIfBondingGroup,
    mbgLtNgCfgPhysicalIfIpv6Mode,
    mbgLtNgCfgVirtualIfIpv4AddrFromDhcp,
    mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp,
    mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp,
    mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp,
    mbgLtNgCfgVirtualIfIpv4DnsFromDhcp,
    mbgLtNgCfgVirtualIfIpv4DomainFromDhcp,
    mbgLtNgCfgVirtualIfAssigned,
    mbgLtNgCfgVirtualIfMac,
    mbgLtNgCfgVirtualIfLabel,
    mbgLtNgCfgVirtualIfServiceNtp,
    mbgLtNgCfgVirtualIfServiceHttp,
    mbgLtNgCfgVirtualIfServiceHttps,
    mbgLtNgCfgVirtualIfServiceTelnet,
    mbgLtNgCfgVirtualIfServiceSsh,
    mbgLtNgCfgVirtualIfServiceSnmp,
    mbgLtNgCfgVirtualIfServiceFtp,
    mbgLtNgCfgVirtualIfServiceTime,
    mbgLtNgCfgVirtualIfServiceDaytime,
    mbgLtNgCfgVirtualIfServiceFpc,
    mbgLtNgCfgVirtualIfIpv4Addr,
    mbgLtNgCfgVirtualIfIpv4Netmask,
    mbgLtNgCfgVirtualIfIpv4Dhcp,
    mbgLtNgCfgVirtualIfIpv6Addr,
    mbgLtNgCfgVirtualIfIpv6Dhcp,
    mbgLtNgCfgVirtualIfIpv6RoutAdd,
    mbgLtNgCfgVirtualIfIpv6LinkLocal,
    mbgLtNgCfgVirtualIfVlan,
    mbgLtNgCfgVirtualIfVlanTag,
    mbgLtNgCfgVirtualIfVlanPrio,
    mbgLtNgCfgVirtualIfCluster,
    mbgLtNgCfgVirtualIfClusterIpv4Addr,
    mbgLtNgCfgVirtualIfClusterIpv4Netmask,
    mbgLtNgCfgVirtualIfClusterPrio,
    mbgLtNgCfgEthernetGenClusterIp,
    mbgLtNgCfgEthernetGenClusterPort,
    mbgLtNgCfgSyslogServerAddr,
    mbgLtNgCfgSyslogLoglevel,
    mbgLtNgCfgWmailAddress1,
    mbgLtNgCfgWmailAddress2,
    mbgLtNgCfgSnmpTrapRecAddr,
    mbgLtNgCfgSnmpTrapRecCommunity,
    mbgLtNgCfgSnmpTrapRecVersion,
    mbgLtNgCfgSnmpReadCommunity,
    mbgLtNgCfgSnmpWriteCommunity,
    mbgLtNgCfgSnmpV3UserName,
    mbgLtNgCfgSnmpV3UserRights,
    mbgLtNgCfgSnmpV3Context,
    mbgLtNgCfgSnmpV3SecurityLevel,
    mbgLtNgCfgSnmpV3AuthProtocol,
    mbgLtNgCfgSnmpV3AuthPassphrase,
    mbgLtNgCfgSnmpV3PrivProtocol,
    mbgLtNgCfgSnmpV3PrivPassphrase,
    mbgLtNgCfgSnmpRetries,
    mbgLtNgCfgSnmpTimeout,
    mbgLtNgCfgSnmpEnabledVersion,
    mbgLtNgCfgNtpMaxClientOffset,
    mbgLtNgCfgNtpMaxClientStratum,
    mbgLtNgCfgTrapNormalOperation,
    mbgLtNgCfgTrapNtpNotSync,
    mbgLtNgCfgTrapNtpSync,
    mbgLtNgCfgTrapNtpStopped,
    mbgLtNgCfgTrapServerBoot,
    mbgLtNgCfgTrapRefclockNotResponding,
    mbgLtNgCfgTrapRefclockSynchronized,
    mbgLtNgCfgTrapRefclockNotSynchronized,
    mbgLtNgCfgTrapSecRefclockNotResponding,
    mbgLtNgCfgTrapSecRefclockSynchronized,
    mbgLtNgCfgTrapSecRefclockNotSynchronized,
    mbgLtNgCfgTrapAntennaFaulty,
    mbgLtNgCfgTrapAntennaReconnect,
    mbgLtNgCfgTrapAntennaShortCircuit,
    mbgLtNgCfgTrapConfigChanged,
    mbgLtNgCfgTrapLeapSecAnnounced,
    mbgLtNgCfgTrapNtpClientLimitExceeded,
    mbgLtNgCfgTrapRefSrcDisconnected,
    mbgLtNgCfgTrapRefSrcReconnected,
    mbgLtNgCfgTrapShsTimeLimitError,
    mbgLtNgCfgTrapShsTimeLimitWarning,
    mbgLtNgCfgTrapNetworkDown,
    mbgLtNgCfgTrapNetworkUp,
    mbgLtNgCfgTrapPowerSupplyUp,
    mbgLtNgCfgTrapPowerSupplyDown,
    mbgLtNgCfgTrapFdmError,
    mbgLtNgCfgTrapLowSystemResources,
    mbgLtNgCfgTrapPtpNetworkDown,
    mbgLtNgCfgTrapPtpNetworkUp,
    mbgLtNgCfgTrapPtpStateChanged,
    mbgLtNgCfgTrapPtpError,
    mbgLtNgCfgTrapRefSrcLimitExceeded,
    mbgLtNgCfgTrapFanDown,
    mbgLtNgCfgTrapFanUp,
    mbgLtNgCfgRepeatEvent,
    mbgLtNgCfgRepetitions,
    mbgLtNgCfgTrapWarmedUp,
    mbgLtNgCfgTrapNotWarmedUp,
    mbgLtNgCfgDisableRootLogin,
    mbgLtNgCfgDisableUsbPort,
    mbgLtNgCfgAllowNetworkDiscovery,
    mbgLtNgCfgLockFrontPanel,
    mbgLtNgCfgSshKeyLength,
    mbgLtNgCfgSshShellTimeout,
    mbgLtNgCfgWebLanguage,
    mbgLtNgCfgActivateChangesAsStartup,
    mbgLtNgCfgEnableFrontPanelLight,
    mbgLtNgCmdExecute,
    mbgLtNgCmdSetTime,
    mbgLtNgFdmFreq,
    mbgLtNgFdmFreqDev,
    mbgLtNgFdmNomFreq,
    mbgLtNgPtpNumberOfModules,
    mbgLtNgPtpMode,
    mbgLtNgPtpPortState,
    mbgLtNgPtpLocalMac,
    mbgLtNgPtpGrandmasterMac,
    mbgLtNgPtpGrandmasterUuid,
    mbgLtNgPtpClockAccuracy,
    mbgLtNgPtpClockClass,
    mbgLtNgPtpTimeSource,
    mbgLtNgPtpUtcOffset,
    mbgLtNgPtpTimeSeconds,
    mbgLtNgPtpTsuTime,
    mbgLtNgPtpSysTime,
    mbgLtNgPtpPortLinkup,
    mbgLtNgPtpOffsetFromGM,
    mbgLtNgPtpPathDelay,
    mbgLtNgPtpDelayMec,
    mbgLtNgPtpDomain,
    mbgLtNgPtpDelayAsymmetry,
    mbgLtNgPtpAvail,
    mbgLtNgSysNumberOfPowerSupplies,
    mbgLtNgSysPsStatus,
    mbgLtNgSysNumberOfFans,
    mbgLtNgSysFanStatus,
    mbgLtNgSysFanError,
    mbgLtNgSysTempCelsius
	}
        STATUS  current
        DESCRIPTION
                        "The collection of objects for the LANTIME MIB"
        ::= { mbgLtNgGroups 1 }
        
mbgLtNgTrapsGroup NOTIFICATION-GROUP 
        NOTIFICATIONS {
            mbgLtNgTrapNTPNotSync,
            mbgLtNgTrapNTPStopped,
            mbgLtNgTrapServerBoot,
            mbgLtNgTrapReceiverNotResponding,
            mbgLtNgTrapReceiverNotSync,
            mbgLtNgTrapAntennaFaulty,
            mbgLtNgTrapAntennaReconnect,
            mbgLtNgTrapConfigChanged,
            mbgLtNgTrapLeapSecondAnnounced,
            mbgLtNgTrapSHSTimeLimitError,
            mbgLtNgTrapSecondaryRecNotSync,
            mbgLtNgTrapPowerSupplyFailure,
            mbgLtNgTrapAntennaShortCircuit,
            mbgLtNgTrapReceiverSync,
            mbgLtNgTrapNTPClientAlarm,
            mbgLtNgTrapPowerSupplyUp,
            mbgLtNgTrapNetworkDown,
            mbgLtNgTrapNetworkUp,
            mbgLtNgTrapSecondaryRecNotResp,
            mbgLtNgTrapXmrLimitExceeded,
            mbgLtNgTrapXmrRefDisconnect,
            mbgLtNgTrapXmrRefReconnect,
            mbgLtNgTrapFdmError,
            mbgLtNgTrapSHSTimeLimitWarning,
            mbgLtNgTrapSecondaryRecSync,
            mbgLtNgTrapNTPSync,
            mbgLtNgTrapNormalOperation,
            mbgLtNgTrapHeartbeat,
            mbgLtNgTrapTestNotification,
            mbgLtNgTrapPtpPortDisconnected,
            mbgLtNgTrapPtpPortConnected,
            mbgLtNgTrapPtpStateChanged,
            mbgLtNgTrapPtpError,
            mbgLtNgTrapLowSystemResources,
            mbgLtNgTrapSufficientSystemResources,
            mbgLtNgTrapFanDown,
            mbgLtNgTrapFanUp,
            mbgLtNgTrapCertificateExpired,
            mbgLtNgTrapOscillatorWarmedUp,
            mbgLtNgTrapOscillatorNotWarmedUp,
            mbgLtNgTrapXmrRefChanged,
            mbgLtNgTrapClusterMasterChanged,
            mbgLtNgTrapClusterFalsetickerDetected,
            mbgLtNgTrapClusterFalsetickerCleared,
            mbgLtNgTrapSHSTimeLimitOk,
            mbgLtNgTrapIMSError,
            mbgLtNgTrapIMSOk,
            mbgLtNgTrapFDMOk,
            mbgLtNgTrapNTPOffsetLimitExceeded,
            mbgLtNgTrapNTPOffsetLimitOk
        }
        STATUS  current
        DESCRIPTION
                        "The collection of traps for the LANTIME MIB"
        ::= { mbgLtNgGroups 2 }
        
END