path: root/MIBS/junose/Juniper-UNI-IF-MIB

-- *****************************************************************************
-- Juniper-UNI-IF-MIB
--
-- Juniper Networks Enterprise MIB
--   Interfaces MIB
--
-- Copyright (c) 1998 Redstone Communications, Inc.
-- Copyright (c) 1999, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2003 Juniper Networks, Inc.
-- Copyright (c) 2004 Juniper Networks, Inc.
--   All Rights Reserved.
-- *****************************************************************************

Juniper-UNI-IF-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    ifEntry, ifStackHigherLayer, ifStackLowerLayer
        FROM IF-MIB
    juniMibs
        FROM Juniper-MIBs;

juniIfMIB  MODULE-IDENTITY
    LAST-UPDATED "200510112040Z"  -- 11-Oct-05 04:40 PM EDT
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
        "       Juniper Networks, Inc.
        Postal: 10 Technology Park Drive
                Westford, MA  01886-3146
                USA
        Tel:    +1 978 589 5800
        E-mail: mib@Juniper.net"
    DESCRIPTION
        "The Generic Interfaces MIB for the Juniper Networks
        enterprise."
    -- Revision History
    REVISION    "200510112040Z"  -- 11-Oct-05 04:40 PM EDT  - JUNOSe 7.1
    DESCRIPTION
        "Added interface type:
            plsL2ShimInterface(45) "
    REVISION    "200307162140Z"  -- 16-Jul-03 05:40 PM EDT  - JUNOSe 5.1
    DESCRIPTION
        "Added interface type:
            atmActiveSubInterface(257) "
    REVISION    "200302061557Z"  -- 06-Feb-03 10:57 AM EST  - JUNOSe 5.0
    DESCRIPTION
        "Replaced Unisphere names with Juniper names.
         Added interface types:
            bridgeInterface(48),
            ipsecTransportInterface(49),
            ipv6Interface(50),
            ipv6TunnelInterface(51),
            ipv6Loopback(52),
            osi(53),
            atmVirtualCircuit(145),
            pppLink(256) "
    REVISION    "200201221652Z"  -- 22-Jan-02 11:52 AM EST  - JUNOSe 4.0
    DESCRIPTION
        "Added interface types:
            gtpInterface(37),
            smdsMajorInterface(38),
            smdsSubInterface(39),
            ipsecInterface(43),
            sgInterface(44),
            lacGenInterface(47) "
    REVISION    "200103281512Z"  -- 28-Mar-01 10:12 AM EST  - JUNOSe 3.2
    DESCRIPTION
        "Added interface types:
            l2fTunnelInterface(40),
            l2fSessionInterface(41),
            l2fDestinationInterface(42) "
    REVISION    "200011222341Z"  -- 22-Nov-00 06:41 PM EST  - JUNOSe 3.1
    DESCRIPTION
        "Added interface types:
            vlanMajorInterface(34),
            vlanSubInterface(35),
            cbfInterface(36) "
    REVISION    "200009291835Z"  -- 29-Sep-00 02:35 PM EDT  - JUNOSe 3.0
    DESCRIPTION
        "Added interface types:
            multilinkFrameRelayInterface(29),
            ipTunnelInterface(30),
            serverPortInterface(31),
            smdsInterface(32) "
    REVISION    "200007271545Z"  -- 27-Jul-00 11:45 AM EDT  - JUNOSe 2.2
    DESCRIPTION
        "Added interface type:
            sonetVTInterface(33) "
    REVISION    "200005051508Z"  -- 05-May-00 11:08 AM EDT  - JUNOSe 2.0
    DESCRIPTION
        "Added interface types:
            l2tpSessionInterface(21),
            mlPppLinkInterface(22),
            l2tpDestinationInterface(24),
            mplsMajorInterface(25),
            mplsMinorInterface(26),
            mlPppNetworkInterface(27),
            ethernetSubInterface(28) "
    REVISION    "199912211518Z"  -- 21-Dec-99 10:18 AM EST  - JUNOSe 1.3
    DESCRIPTION
        "Added interface types:
            bridgedEthernet(19),
            l2TpTunnelInterface(20),
            slepInterface(23) "
    REVISION    "199909031416Z"  -- 03-Sep-99 10:16 AM EDT  - JUNOSe 1.1
    DESCRIPTION
        "Added interface types:
            pppoe(17),
            pppoeSubInterface(18) "
    REVISION      "9811132019Z"  -- 13-Nov-98 03:19 PM EST  - JUNOSe 1.0
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { juniMibs 3 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- Interface types.
--
JuniIfType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Interface type identification for physical-, link-, and
        network-layer interfaces."
    SYNTAX      INTEGER {
                    ip(0),
                    ppp(1),
                    ds0(2),
                    ds1(3),
                    ds3(4),
                    frameRelay(5),
                    ethernet(6),
                    sonet(7),
                    sonetPath(8),
                    atm(9),
                    aal5(10),
                    atmSubInterface(11),
                    ft1(12),
                    hdlc(13),
                    ipLoopback(14),
                    ipVirtual(15),
                    frSubInterface(16),
                    pppoe(17),
                    pppoeSubInterface(18),
                    bridgedEthernet(19),
                    l2tpTunnelInterface(20),
                    l2tpSessionInterface(21),
                    mlPppLinkInterface(22),
                    slepInterface(23),
                    l2tpDestinationInterface(24),
                    mplsMajorInterface(25),
                    mplsMinorInterface(26),
                    mlPppNetworkInterface(27),
                    ethernetSubInterface(28),
                    multilinkFrameRelayInterface(29),
                    ipTunnelInterface(30),
                    serverPortInterface(31),
                    smdsInterface(32),
                    sonetVTInterface(33),
                    vlanMajorInterface(34),
                    vlanSubInterface(35),
                    cbfInterface(36),
                    gtpInterface(37),
                    smdsMajorInterface(38),
                    smdsSubInterface(39),
                    l2fTunnelInterface(40),
                    l2fSessionInterface(41),
                    l2fDestinationInterface(42),
                    ipsecInterface(43),
                    sgInterface(44),
		    mplsL2ShimInterface(45),
                    lacGenInterface(47),
                    bridgeInterface(48),
                    ipsecTransportInterface(49),
                    ipv6Interface(50),
                    ipv6TunnelInterface(51),
                    ipv6Loopback(52),
                    osi(53),
                    lag(54),
                    ipTunnelMdt(55),
                    -- multi-personality and pseudo interfaces
                    atmVirtualCircuit(145),
                    pppLink(256),
                    atmActiveSubInterface(257) }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniInterfaces    OBJECT IDENTIFIER ::= { juniIfMIB 1 }
juniIf            OBJECT IDENTIFIER ::= { juniInterfaces 1 }
juniIfObjects     OBJECT IDENTIFIER ::= { juniIf 1 }

--
-- Generic Interfaces Table
--
juniIfTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains a corresponding entry for each entry found in the
        standard Generic Interfaces MIB ifTable/ifXTable.  The entries in this
        table contain supplementary generic interface characteristics.

        Entries in ifTable/ifXTable and in this table are created/deleted as a
        consequence of hardware detection, or of management configuration via
        standard or enterprise type-specific interface MIBs."
    ::= { juniIfObjects 1 }

juniIfEntry  OBJECT-TYPE
    SYNTAX      JuniIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry representing an interface's enterprise-defined generic
        interface characteristics."
    AUGMENTS  { ifEntry }
    ::= { juniIfTable 1 }

JuniIfEntry ::= SEQUENCE {
    juniIfType  JuniIfType }

juniIfType  OBJECT-TYPE
    SYNTAX      JuniIfType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Identifies the type of this interface."
    ::= { juniIfEntry 1 }

--
-- Inverse Stack Table
--
-- Similar to IF-MIB ifStackTable, but with inverted indexing
-- order of upper/lower layer interfaces: ifStackTable provides
-- <upper, lower> index ordering, this table provides <lower, upper>
-- index ordering.
--
-- This table facilitates efficient bottom-up GetNext traversal of interface
-- layers, in contrast to the efficient top-down GetNext traversal afforded
-- by IF-MIB ifStackTable.
--
-- This MIB table design is derived from the IETF Internet Draft
-- draft-ietf-ifmib-invstackmib-00.txt, "The Inverted Stack Table Extension
-- to the Interfaces Group MIB", McCloghrie & Hanson, July 16 1998.
-- The table definition below is an interim solution, subject to
-- deprecation in favor of a standard solution should the Internet Draft
-- advance to Proposed Standard status.
--
juniIfInvStackTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniIfInvStackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing information on the relationships between the
        multiple sub-layers of network interfaces.  In particular, it contains
        information on which sub-layers run 'underneath' which other sub-layers,
        where each sub-layer corresponds to a conceptual row in the ifTable.
        For example, when the sub-layer with ifIndex value x runs underneath the
        sub-layer with ifIndex value y, then this table contains:

              juniIfInvStackStatus.x.y = active

        For each ifIndex value, I, which identifies an active interface, there
        are always at least two instantiated rows in this table associated with
        I.  For one of these rows, I is the value of ifStackHigherLayer; for the
        other, I is the value of ifStackLowerLayer.  (If I is not involved in
        multiplexing, then these are the only two rows associated with I.)

        For example, two rows exist even for an interface which has no others
        stacked on top or below it:

              ifStackStatus.x.0 = active
              ifStackStatus.0.x = active

        This table contains exactly the same number of rows as the ifStackTable,
        but the rows appear in a different order."
    ::= { juniIfObjects 2 }

juniIfInvStackEntry  OBJECT-TYPE
    SYNTAX      JuniIfInvStackEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information on a particular relationship between two sub-layers,
        specifying that one sub-layer runs underneath the other sub-layer.  Each
        sub-layer corresponds to a conceptual row in the ifTable."
    INDEX     { ifStackLowerLayer,
                ifStackHigherLayer }
    ::= { juniIfInvStackTable 1 }

JuniIfInvStackEntry ::= SEQUENCE {
    juniIfInvStackStatus    RowStatus }

juniIfInvStackStatus  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of the relationship between two sub-layers.

        An instance of this object exists for each instance of the ifStackStatus
        object, and vice versa.  For example, if the variable ifStackStatus.H.L
        exists, then the variable juniIfInvStackStatus.L.H must also exist, and
        vice versa.  In addition, the two variables always have the same value.

        However, unlike ifStackStatus, the juniIfInvStackStatus object is NOT
        write-able.  A network management application wishing to change a
        relationship between sub-layers H and L cannot do so by modifying the
        value of juniIfInvStackStatus.L.H, but must instead modify the value of
        ifStackStatus.H.L.  After the ifStackTable is modified, the change will
        be reflected in this table."
    ::= { juniIfInvStackEntry 1 }

--
-- Interfaces Count Table
--
juniIfCountTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniIfCountEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for each interface type's system wide
        interfaces counts."
    ::= { juniIfObjects 3 }

juniIfCountEntry  OBJECT-TYPE
    SYNTAX      JuniIfCountEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry represents system wide total number of interfaces configured 
        for the particular interface type."
    INDEX  { juniIfCountIfType }
    ::= { juniIfCountTable 1 }

JuniIfCountEntry ::= SEQUENCE {
    juniIfCountIfType JuniIfType,
    juniIfCountNumberOfInterfaces  Unsigned32 }

juniIfCountIfType  OBJECT-TYPE
    SYNTAX      JuniIfType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Identifies the type of this interface."
    ::= { juniIfCountEntry 1 }

juniIfCountNumberOfInterfaces  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents system wide total number of interfaces configured for the 
        particular interface type." 
    ::= { juniIfCountEntry 2 }



-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB.  Placeholders follow.
-- juniIfTraps       OBJECT IDENTIFIER ::= { juniIf 3 }
-- juniIfTrapPrefix  OBJECT IDENTIFIER ::= { juniIfTraps 0 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniIfConformance OBJECT IDENTIFIER ::= { juniIf 4 }
juniIfCompliances OBJECT IDENTIFIER ::= { juniIfConformance 1 }
juniIfGroups      OBJECT IDENTIFIER ::= { juniIfConformance 2 }

--
-- compliance statements
--
juniIfCompliance  MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "Obsolete compliance statement for entities which implement the Juniper
        Generic Interfaces MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
            juniIfGroup,
            juniIfInvStackGroup }
    ::= { juniIfCompliances 1 }                                    -- JUNOSe 1.0

juniIfCompliance1  MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for entities which implement the Juniper
        Generic Interfaces MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
            juniIfGroup,
            juniIfInvStackGroup,
            juniIfCountGroup }
    ::= { juniIfCompliances 2 }                                    -- JUNOSe 6.0

--
-- units of conformance
--
juniIfGroup  OBJECT-GROUP
    OBJECTS {
        juniIfType }
    STATUS      current
    DESCRIPTION
        "A collection of objects for managing generic interfaces in a Juniper
        product."
    ::= { juniIfGroups 1 }                                         -- JUNOSe 1.0

juniIfInvStackGroup  OBJECT-GROUP
    OBJECTS {
        juniIfInvStackStatus }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing inverted information on the layering
        of MIB-II interfaces."
    ::= { juniIfGroups 2 }                                         -- JUNOSe 1.0

juniIfCountGroup  OBJECT-GROUP
    OBJECTS {
        juniIfCountNumberOfInterfaces }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing interface information on the system
        wide count of number of interfaces per interface type."
    ::= { juniIfGroups 3 }                                         -- JUNOSe 6.0

END