path: root/MIBS/junos/JNX-OPT-IF-EXT-MIB

JNX-OPT-IF-EXT-MIB DEFINITIONS ::= BEGIN

   IMPORTS
           MODULE-IDENTITY,
           OBJECT-TYPE,
           Gauge32,
           Integer32,
           Unsigned32,
           Counter64,
           transmission,
           NOTIFICATION-TYPE
                   FROM SNMPv2-SMI
           TEXTUAL-CONVENTION,
           RowPointer,
           RowStatus,
           TruthValue,
           DisplayString,
           DateAndTime
                   FROM SNMPv2-TC
           SnmpAdminString
                   FROM SNMP-FRAMEWORK-MIB
           MODULE-COMPLIANCE, OBJECT-GROUP
                   FROM SNMPv2-CONF
           ifIndex
                   FROM IF-MIB
           JnxoptIfDirectionality,
           jnxoptIfOChConfigEntry,
           jnxoptIfOChSinkCurrentEntry,
           jnxoptIfMibModule
                  FROM JNX-OPT-IF-MIB;



--  This is the MIB module for the optical parameters associated with the
--    black link end points.

jnxoptIfExtMibModule MODULE-IDENTITY
    LAST-UPDATED "201204250000Z"
    ORGANIZATION "IETF Ops/Camp MIB Working Group"
    CONTACT-INFO
       " Email:      Juniper Technical Assistance Center
                     Juniper Networks, Inc.
                     1133 Innovation Way
                     Sunnyvale, CA 94089
                     E-mail: support@juniper.net"
    DESCRIPTION
       "The MIB module to describe Black Link extension to rfc3591.
        It is the enterprise version of the draft
        draft-galikunze-ccamp-g-698-2-snmp-mib-02 "
    REVISION  "201204250000Z"
    DESCRIPTION
       "Draft version 1.0"
    REVISION  "201301250000Z"
    DESCRIPTION
       "Draft version 2.0"
    REVISION  "201302270000Z"
    DESCRIPTION
       "Update FEC error count to Counter64"
    REVISION  "201311010000Z"
    DESCRIPTION
       "Enhancement for OTN PM 24 hour TCA thresholds"
    ::={ jnxoptIfMibModule 3 }


JnxoptIfChannelSpacing ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Channel spacing
           1 - 100  GHz
           2 - 50   GHz
           3 - 25   GHz
           4 - 12.5 GHz
           5 - 6.25 GHz 
           6 - 37.5 GHz "
    SYNTAX  INTEGER {
        spacing100Ghz(1),
        spacing50Ghz(2),
        spacing25Ghz(3),
        spacing12point5Ghz(4),
        spacing6point5Ghz(5),
        spacing37point5Ghz(6)
        }


JnxoptIfBitRateLineCoding ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Optical tributary signal class
           1 - NRZ 2.5G (from nominally 622 Mbit/s to nominally 2.67 Gbit/s)
           2 - NRZ 10G nominally 2.4 Gbit/s to nominally 10.71 Gbit/s.
           3 - 40  Gbits/s
           4 - 100 Gbits/s
           5 - 400 Gbits/s
           6 - 150 Gbits/s
           7 - 200 Gbits/s
        40 Gbits/s and above are under study."
    SYNTAX  INTEGER {
        rate2point5G(1),
        rate10G(2),
        rate40G(3),
        rate100G(4),
        rate400G(5),
        rate150G(6),
        rate200G(7)
        }

JnxoptIfFiberTypeRecommendation ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Fiber Types - ITU-T Recs G.652, G.653, G.654 and G.655
            One for recommendation and one for category.
            G.652 A, B, C, D
            G.653 A, B
            G.654 A, B, C
            G.655 C, D, E
            G.656
            G.657 A, B "
    SYNTAX  INTEGER {
        g652(1),
        g653(2),
        g654(3),
        g655(4),
        g656(5),
        g657(6)
    }

JnxoptIfFiberTypeCategory  ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Fiber Types - ITU-T Recs G.652, G.653, G.654 and G.655
            G.652 A, B, C, D
            G.653 A, B
            G.654 A, B, C
            G.655 C, D, E
            G.656
            G.657 A, B
            Categories - A, B, C, D and E "
    SYNTAX  INTEGER {
        categoryA(1),
        categoryB(2),
        categoryC(3),
        categoryD(4),
        categoryE(5)
        }

JnxoptIfOTNType     ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for
          the Near End or Far End performance data.
            1 - Near End
            2 - Far End "
    SYNTAX INTEGER {
        nearEnd(1),
        farEnd(2)
    }

JnxoptIfOTNDirection  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  " Indicates the direction as Rx/Tx or bi-directional."
    SYNTAX       INTEGER {
                    jnxTxDir(1),
                    jnxRxDir(2),
                    jnxBiDir(3)
                 }

JnxoptIfOTNLayer   ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for OTUk,
          ODUk, TCM performance data.
            1 - OTUk
            2 - ODUk
            3 - TCM
         The ODUk layer and TCM sublayer PM is not related to the black link PM
         management, but since this could be a common PM model for the ODUk
         layer and TCM layers, we include it here so it may be used for simple
         scenarios where only lower order ODUk or higher order ODUk is present.
         For scenarios where both lower order ODUk and higher order ODUk are
         present, further extension to the MIB model is required, in particular
         for the indexing for these layers."
    SYNTAX INTEGER {
        jnxoptIfOTUkLayer(1),
        jnxoptIfODUkLayer(2),
        jnxoptIfTCMSubLayer(3)
    }

--
-- Alarm for the OCh and OTUk sublayer
--
JnxoptIfOTNOChAlarms  ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "This is the possible alarms from the OCh and OTUk layer."
    SYNTAX INTEGER {
        -- No alarm
        jnxoptIfOtnNoAlarm(0),
        -- OTN Loss of signal alarm
        jnxoptIfOtnLosAlarm(1),
        -- OTN Loss of frame alarm
        jnxoptIfOtnLofAlarm(2),
        -- OTN Loss of multi framealarm
        jnxoptIfOtnLomAlarm(3),
        -- OTN SSF alarm
        jnxoptIfOtuSsfAlarm(4),
        -- OTN OTU BDI alarm
        jnxoptIfOtuBdiAlarm(5),
        -- OTN OTU Trail Trace mismatch alarm
        jnxoptIfOtuTimAlarm(6),
        -- OTN OTU IAE alarm
        jnxoptIfOtuIaeAlarm(7),
        -- OTN OTU BIAE alarm,
        jnxoptIfOtuBiaeAlarm(8),
        -- OTN TSF alarm
        jnxoptIfOtuTsfAlarm(9),
        -- OTN OTU Degraded alarm,
        jnxoptIfOtuDegAlarm(10),
        -- OTN OTU Fec ExcessiveErrors alarm
        jnxoptIfOtuFecExcessiveErrsAlarm(11),
        -- OTN OTU BBE Thresholdalarm
        jnxoptIf15MinThreshBBETCA(12),
        -- OTN OTU ES Thresholdalarm
        jnxoptIf15MinThreshESTCA(13),
        -- OTN OTU SES Threshold alarm
        jnxoptIf15MinThreshSESTCA(14),
        -- OTN OTU UAS Threshold alarm
        jnxoptIf15MinThreshUASTCA(15),
        -- OTN OTU Bip8 Thresholdalarm alarm
        jnxoptIf15MinThreshBip8TCA(16),
        -- OTN  FEC uncorrectedwords TCA
        jnxoptIf15MinThUnCorrectedWordsTCA(17),
        -- OTN  Pre FEC BER TCA
        jnxoptIf15MinThreshPreFECBERTCA(18),
        -- OTN OTU 24 hour BBE Thresholdalarm
        jnxoptIf24HourThreshBBETCA(19),
        -- OTN OTU 24 hour  ES Thresholdalarm
        jnxoptIf24HourThreshESTCA(20),
        -- OTN OTU 24 hour SES Threshold alarm
        jnxoptIf24HourThreshSESTCA(21),
        -- OTN OTU 24 hour UAS Threshold alarm
        jnxoptIf24HourThreshUASTCA(22),
        -- OTN OTU 24 hour Bip8 Thresholdalarm alarm
        jnxoptIf24HourThreshBip8TCA(23),
        -- OTN  Pre FEC BER 24 hour TCA
        jnxoptIf24HourThreshPreFECBERTCA(24),
        -- OTN OTU AIS alarm
        jnxoptIfOtuAisAlarm(25),
        -- OTN OTU Far end Fec Degraded/Excessive alarm,
        jnxoptIfOtuFEFecErrAlarm(26)
    }

JnxoptIfOTNODUkTcmAlarms  ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "This is the alarms from the ODUk and TCM layer."
    SYNTAX INTEGER {
        -- No alarm
        jnxoptIfOtnOdukTcmNoAlarm(0),
        -- OTN ODU/TCM OCI alarm
        jnxoptIfOdukTcmOciAlarm(1),
        -- OTN ODU/TCM LCK alarm
        jnxoptIfOdukTcmLckAlarm(2),
        -- OTN ODU/TCM BDI alarm
        jnxoptIfOdukTcmBdiAlarm(3),
        -- OTN ODU/TCM Trail Trace mismatch alarm
        jnxoptIfOdukTcmTimAlarm(4),
        -- OTN ODU/TCM Degraded alarm,
        jnxoptIfOdukTcmDegAlarm(5),
        -- OTN ODU IAE alarm
        jnxoptIfOdukTcmIaeAlarm(6),
        -- OTN ODU/TCM Loss of Tandem Connection
        jnxoptIfOdukTcmLTCAlarm(7),
        -- OTN ODU/TCM CSF alarm,
        jnxoptIfOdukTcmCSfAlarm(8),
        -- OTN ODU/TCM SSF alarm,
        jnxoptIfOdukTcmSSfAlarm(9),
        -- OTN ODU/TCM TSF alarm,
        jnxoptIfOdukTcmTSfAlarm(10),
        -- OTN ODU BBE Threshold alarm
        jnxoptIfOdukTcm15MinThreshBBETCA(11),
        -- OTN ODU ES Threshold alarm
        jnxoptIfOdukTcm15MinThreshESTCA(12),
        -- OTN ODU SES Threshold alarm
        jnxoptIfOdukTcm15MinThreshSESTCA(13),
        -- OTN ODU UAS Threshold alarm
        jnxoptIfOdukTcm15MinThreshUASTCA(14),
        -- OTN ODU Bip8 Threshold alarm
        jnxoptIfOdukTcm15MinThreshBip8TCA(15),
        -- OTN ODU Ais 
        jnxoptIfOdukTcmAisAlarm(16), 
        -- OTN ODU PTM - payload type mismatch 
        jnxoptIfOdukPtmAlarm(17),
        -- OTN ODU 24 hour BBE Threshold alarm
        jnxoptIfOdukTcm24HourThreshBBETCA(18),
        -- OTN ODU 24 hour ES Threshold alarm
        jnxoptIfOdukTcm24HourThreshESTCA(19),
        -- OTN ODU SES Threshold alarm
        jnxoptIfOdukTcm24HourThreshSESTCA(20),
        -- OTN ODU 24 hour UAS Threshold alarm
        jnxoptIfOdukTcm24HourThreshUASTCA(21),
        -- OTN ODU 24 hour bip8 Threshold alarm
        jnxoptIfOdukTcm24HourThreshBip8TCA(22) 
     }

JnxoptIfOTNAlarmSeverity  ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION  "Severity of the Notification"
    SYNTAX       INTEGER {
        jnxCritical(1),
        jnxMajor(2),
        jnxMinor(3),
        jnxInfo(4)
    }

-- Addition to the RFC 3591 objects
jnxoptIfOTNNotifications    OBJECT IDENTIFIER   ::= { jnxoptIfExtMibModule 0 }
jnxoptIfOPSmEntry           OBJECT IDENTIFIER   ::= { jnxoptIfExtMibModule 1 }
jnxoptIfOChSrcSinkGroup     OBJECT IDENTIFIER   ::= { jnxoptIfExtMibModule 2 }
jnxoptIfOTNPMGroup          OBJECT IDENTIFIER   ::= { jnxoptIfExtMibModule 3 }
jnxoptIfOTNAlarm            OBJECT IDENTIFIER   ::= { jnxoptIfExtMibModule 4 }

-- OPS - Optical Phyical Section
jnxoptIfOPSmConfigTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOPSmConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of OPS General config  parameters."
    ::= { jnxoptIfOPSmEntry 1 }

jnxoptIfOPSmConfigEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOPSmConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An conceptual row of OPS General config parameters."
    INDEX  { ifIndex  }
    ::= { jnxoptIfOPSmConfigTable 1 }

    JnxoptIfOPSmConfigEntry  ::=
        SEQUENCE {
            jnxoptIfOPSmDirectionality        
                                      JnxoptIfDirectionality,
            jnxoptIfOPSmFiberTypeRecommendation
                                      JnxoptIfFiberTypeRecommendation,
            jnxoptIfOPSmFiberTypeCategory  
                                      JnxoptIfFiberTypeCategory
        }

jnxoptIfOPSmDirectionality  OBJECT-TYPE
    SYNTAX    JnxoptIfDirectionality
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Indicates the directionality of the entity."
    ::= { jnxoptIfOPSmConfigEntry  1 }

jnxoptIfOPSmFiberTypeRecommendation  OBJECT-TYPE
    SYNTAX    JnxoptIfFiberTypeRecommendation
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Fiber type as per fibre types are chosen from those defined in
         ITU-T Recs G.652, G.653, G.654, G.655, G.656 and G.657."
    ::= { jnxoptIfOPSmConfigEntry  2 }

jnxoptIfOPSmFiberTypeCategory  OBJECT-TYPE
    SYNTAX    JnxoptIfFiberTypeCategory
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Fiber type as per fibre types are chosen from those defined in
         ITU-T Recs G.652, G.653, and G.655.
         The categories are A, B, C, D and E."
    ::= { jnxoptIfOPSmConfigEntry  3 }


-- OCh config table
-- modified the OCh Table group
-- General parameters for the Black Link Ss-Rs will be added to
-- the OchConfigTable

jnxoptIfOChConfigExtTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOChConfigExtEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of Och General config extension parameters"
    ::= {  jnxoptIfOChSrcSinkGroup 1 }

jnxoptIfOChConfigExtEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOChConfigExtEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual row that contains OCh configuration extension
         information of an interface."
    AUGMENTS { jnxoptIfOChConfigEntry }
    ::= { jnxoptIfOChConfigExtTable 1 }


JnxoptIfOChConfigExtEntry ::=
    SEQUENCE {
        jnxoptIfOChMiminumChannelSpacing                JnxoptIfChannelSpacing,
        jnxoptIfOChBitRateLineCoding                    JnxoptIfBitRateLineCoding,
        jnxoptIfOChFEC                                  Unsigned32,
        jnxoptIfOChSinkMaximumBERMantissa               Unsigned32,
        jnxoptIfOChSinkMaximumBERExponent               Unsigned32,
        jnxoptIfOChMinWavelength                        Unsigned32,
        jnxoptIfOChMaxWavelength                        Unsigned32,
        jnxoptIfOChWavelength                           Unsigned32,
        jnxoptIfOChVendorTransceiverClass               DisplayString,
        jnxoptIfOChOpticalInterfaceApplicationCode      DisplayString,
        jnxoptIfOChLaserAdminState                      INTEGER,
        jnxoptIfOChLaserOperationalState                INTEGER,
        jnxoptIfOChAdminState                           INTEGER,
        jnxoptIfOChOperationalState                     INTEGER
     }

jnxoptIfOChMiminumChannelSpacing  OBJECT-TYPE
    SYNTAX      JnxoptIfChannelSpacing
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A minimum nominal difference in frequency (GHz) between two adjacent
         channels."
    ::= { jnxoptIfOChConfigExtEntry 1 }

jnxoptIfOChBitRateLineCoding  OBJECT-TYPE
    SYNTAX  JnxoptIfBitRateLineCoding
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Optical tributary signal class
          NRZ 2.5G (from nominally 622 Mbit/s  to nominally  2.67 Gbit/s)
          NRZ 10G  (nominally 2.4 Gbit/s to nominally 10.71 Gbit/s) "
    ::= { jnxoptIfOChConfigExtEntry 2 }

jnxoptIfOChFEC  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This parameter indicates what Forward Error Correction (FEC) code
         is used at Source and Sink.
         GFEC (from G709) and the I.x EFEC's
         (G.975 - Table I.1 super FEC).
           1 - No FEC
           2 - GFEC
           3 - I.2 EFEC
           4 - I.3 EFEC
           5 - I.4 EFEC
           6 - I.5 EFEC
           7 - I.6 EFEC
           8 - I.7 EFEC
           9 - I.8 EFEC
          10 - I.9 EFEC
          11 - 100G FEC (for new applications)
          12 - 100G EFEC (for new applications)
          99 - Vendor Specific "
    ::= { jnxoptIfOChConfigExtEntry 3 }

jnxoptIfOChSinkMaximumBERMantissa  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This parameter indicate the maximum Bit(mantissa) error rate can be
         supported by the application at the Receiver.  In case of FEC
         applications it is intended after the FEC correction."
    ::= { jnxoptIfOChConfigExtEntry  4 }

jnxoptIfOChSinkMaximumBERExponent  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This parameter indicate the maximum Bit(exponent) error rate can be
         supported by the application at the Receiver.  In case of FEC
         applications it is intended after the FEC correction."
    ::= { jnxoptIfOChConfigExtEntry  5 }

jnxoptIfOChMinWavelength  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS "0.01 nm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "This parameter indicate minimum wavelength spectrum in a
        definite wavelength Band (L, C and S) "
    ::= { jnxoptIfOChConfigExtEntry  6 }

jnxoptIfOChMaxWavelength  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS "0.01 nm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "This parameter indicate maximum wavelength spectrum in a
        definite wavelength Band (L, C and S) "
    ::= { jnxoptIfOChConfigExtEntry  7 }

jnxoptIfOChWavelength  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS "0.01 nm"
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This parameter indicates the wavelength value."
    ::= { jnxoptIfOChConfigExtEntry  8 }

jnxoptIfOChVendorTransceiverClass  OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..64))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "As defined in G.698
        Vendors can summarize a set of parameters in a
        single proprietary parameter: the Class of transceiver.  The
        Transceiver classification will be based on the Vendor Name and
        the main TX and RX parameters (i.e.  Trunk Mode, Framing, Bit
        rate, Trunk Type etc).
        If this parameter is used, the MIB parameters
        specifying the Transceiver characteristics may not be significant
        and the vendor will be responsible to specify the Class contents
        and values.  The Vendor can publish the parameters of its Classes
        or declare to be compatible with published Classes.(G) Optional
        for compliance. (not mentioned in G.698) "
    ::= { jnxoptIfOChConfigExtEntry  9 }

jnxoptIfOChOpticalInterfaceApplicationCode  OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..64))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This parameter indicates the transceiver application code at Ss
         and Rs as defined in [ITU.G698.2] Chapter 5.3 "
    ::= { jnxoptIfOChConfigExtEntry  10 }

jnxoptIfOChLaserAdminState  OBJECT-TYPE
    SYNTAX  INTEGER {
                disabled(0),
                enabled(1)
            }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The configured State of the laser:
            0 - disabled
            1 - enabled "
    ::= { jnxoptIfOChConfigExtEntry  11 }

jnxoptIfOChLaserOperationalState  OBJECT-TYPE
    SYNTAX  INTEGER {
                disabled(0),
                enabled(1),
                fault(2),
                degraded(3)
            }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Operational Status of Laser:
            0 - disabled
            1 - Enabled 
            2 - fault
            3 - degraded"
    ::= {  jnxoptIfOChConfigExtEntry  12 }

jnxoptIfOChAdminState  OBJECT-TYPE
    SYNTAX  INTEGER {
                disable(0),
                enable(1)
            }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Administrative Status of an Interface:
            0 - Out of Service
            1 - In Service
        "
    ::= {  jnxoptIfOChConfigExtEntry  13 }

jnxoptIfOChOperationalState  OBJECT-TYPE
    SYNTAX   INTEGER {
                 disabled(0),
                 enabled(1),
                 fault(2),
                 degraded(3)
             }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Operational Status of an Interface:
            0 - disabled
            1 - enabled
            2 - Fault 
            3 - Degraded"
    ::= {  jnxoptIfOChConfigExtEntry  14 }



-- Parameters at OCh Src (Ss)
--  OptIfOChSrcConfigEntry

jnxoptIfOChSrcConfigTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOChSrcConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A configuration table of OCh Src (Ss) parameters."
    ::= { jnxoptIfOChSrcSinkGroup 2 }

jnxoptIfOChSrcConfigEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOChSrcConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual row that contains the Src (Ss) configuration
         parameters for a given interface."
    INDEX  { ifIndex  }
    ::= { jnxoptIfOChSrcConfigTable 1 }

JnxoptIfOChSrcConfigEntry ::=
    SEQUENCE {
        jnxoptIfOChMinimumMeanChannelOutputPower               Integer32,
        jnxoptIfOChMaximumMeanChannelOutputPower               Integer32,
        jnxoptIfOChMinimumCentralFrequency                     Unsigned32,
        jnxoptIfOChMaximumCentralFrequency                     Unsigned32,
        jnxoptIfOChMaximumSpectralExcursion                    Unsigned32,
        jnxoptIfOChMaximumTxDispersionOSNRPenalty              Integer32
     }

jnxoptIfOChMinimumMeanChannelOutputPower  OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.01 dbm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimum mean launched power at Ss is the average power (in dbm)
         of a pseudo-random data sequence coupled into the DWDM link."
    ::= { jnxoptIfOChSrcConfigEntry  1}

jnxoptIfOChMaximumMeanChannelOutputPower  OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.01 dbm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum mean launched power at Ss is the average power (in dbm)
         of a pseudo-random data sequence coupled into the DWDM link."
    ::= { jnxoptIfOChSrcConfigEntry  2}

jnxoptIfOChMinimumCentralFrequency  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS      "0.01 THz"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimum central frequency is the nominal single-channel frequency
         (in THz) on which the digital coded information of the particular
         optical channel is modulated by use of the NRZ line code.
         Eg 191.5THz will be represented as 19150 "
    ::= { jnxoptIfOChSrcConfigEntry  3}

jnxoptIfOChMaximumCentralFrequency  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS      "0.01 THz"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum central frequency is the nominal single-channel frequency
         (in THz) on which the digital coded information of the particular
         optical channel is modulated by use of the NRZ line code.
         Eg 191.5THz will be represented as 19150 "
    ::= { jnxoptIfOChSrcConfigEntry  4}

jnxoptIfOChMaximumSpectralExcursion  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS      "0.1 GHz"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the maximum acceptable difference between the nominal
         central frequency (in GHz) of the channel and the minus 15 dB
         points of the transmitter spectrum furthest from the nominal
         central frequency measured at point Ss."
    ::= { jnxoptIfOChSrcConfigEntry  5}


jnxoptIfOChMaximumTxDispersionOSNRPenalty OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Defines a reference receiver that this penalty is measured with.
         Lowest OSNR at Ss with worst case (residual) dispersion minus the
         Lowest OSNR at Ss with no dispersion. Lowest OSNR at Ss with no
         dispersion "
    ::= { jnxoptIfOChSrcConfigEntry  6}

--  Optical Path from Point Src (Ss) to Sink (Rs)
--  Alternatively this can be jnxoptIfOChSsRsTable

jnxoptIfOChSrcSinkConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOChSrcSinkConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of paramters for the optical path from Src to Sink
        (Ss to Rs)."
    ::= { jnxoptIfOChSrcSinkGroup 3 }

jnxoptIfOChSrcSinkConfigEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOChSrcSinkConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual row that contains the optical path Src-Sink (Ss-Rs)
         configuration parameters for a given interface."
    INDEX  { ifIndex  }
    ::= { jnxoptIfOChSrcSinkConfigTable 1 }

JnxoptIfOChSrcSinkConfigEntry ::=
     SEQUENCE {
         jnxoptIfOChSrcSinkMinimumChromaticDispersion              Integer32,
         jnxoptIfOChSrcSinkMaximumChromaticDispersion              Integer32,
         jnxoptIfOChSrcSinkMinimumSrcOpticalReturnLoss             Integer32,
         jnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSink     Integer32,
         jnxoptIfOChSrcSinkMaximumDifferentialGroupDelay           Integer32,
         jnxoptIfOChSrcSinkMaximumPolarisationDependentLoss        Integer32,
         jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk            Integer32,
         jnxoptIfOChSrcSinkInterFerometricCrosstalk                Integer32,
         jnxoptIfOChSrcSinkOpticalPathOSNRPenalty                  Integer32
     }

jnxoptIfOChSrcSinkMinimumChromaticDispersion OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "ps/nm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "These parameters define the minimum value of the
         optical path 'end to end chromatic dispersion' (in ps/nm) that the
         system shall be able to tolerate."
    ::= { jnxoptIfOChSrcSinkConfigEntry  1}

jnxoptIfOChSrcSinkMaximumChromaticDispersion OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "ps/nm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "These parameters define the maximum value of the
         optical path 'end to end chromatic dispersion' (in ps/nm) that the
         system shall be able to tolerate."
    ::= { jnxoptIfOChSrcSinkConfigEntry  2 }

jnxoptIfOChSrcSinkMinimumSrcOpticalReturnLoss    OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "These parameter defines minimum optical return loss (in dB) of the
         cable plant at the source reference point (Src/Ss), including any
         connectors."
    ::= { jnxoptIfOChSrcSinkConfigEntry  3 }


jnxoptIfOChSrcSinkMaximumDiscreteReflectanceSrcToSink   OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Optical reflectance is defined to be the ratio of the reflected
         optical power pre.sent at a point, to the optical power incident to
         that point.  Control of reflections is discussed extensively in
         ITU-T Rec. G.957."
    ::= { jnxoptIfOChSrcSinkConfigEntry  4}

jnxoptIfOChSrcSinkMaximumDifferentialGroupDelay   OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "ps"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Differential group delay (DGD) is the time difference between the
         fractions of a pulse that are transmitted in the two principal
         states of polarization of an optical signal.  For distances
         greater than several kilometres, and assuming random (strong)
         polarization mode coupling, DGD in a fibre can be statistically
         modelled as having a Maxwellian distribution."
    ::= { jnxoptIfOChSrcSinkConfigEntry  5}


jnxoptIfOChSrcSinkMaximumPolarisationDependentLoss   OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The polarisation dependent loss (PDL) is the difference (in dB)
         between the maximum and minimum values of the channel insertion
         loss (or gain) of the black-link from point SS to RS due to a
         variation of the state of polarization (SOP) over all SOPs."
    ::= { jnxoptIfOChSrcSinkConfigEntry  6}

jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk   OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Inter-channel crosstalk is defined as the ratio of total power in
         all of the disturbing channels to that in the wanted channel,
         where the wanted and disturbing channels are at different
         wavelengths.  The parameter specify the isolation of a link
         conforming to the 'black-link' approach such that under the worst-
         case operating conditions the inter-channel crosstalk at any
         reference point RS is less than the maximum inter-channel
         crosstalk value."
    ::= { jnxoptIfOChSrcSinkConfigEntry  7}


jnxoptIfOChSrcSinkInterFerometricCrosstalk   OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This parameter places a requirement on the isolation of a link
         conforming to the 'black-link' approach such that under the worst
         case operating conditions the interferometric crosstalk at any
         reference point RS is less than the maximum interferometric
         crosstalk value.."
    ::= { jnxoptIfOChSrcSinkConfigEntry  8}

jnxoptIfOChSrcSinkOpticalPathOSNRPenalty  OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The optical path OSNR penalty is defined as the difference between
         the Lowest OSNR at Rs and Lowest OSNR at Ss that meets the BER
         requirement."
    ::= { jnxoptIfOChSrcSinkConfigEntry  9}

-- Parameters at Sink (Rs)
-- jnxoptIfOChSinkConfigTable
jnxoptIfOChSinkConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOChSinkConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of OCh Sink (Rs) configuration parameters."
    ::= { jnxoptIfOChSrcSinkGroup  4 }

jnxoptIfOChSinkConfigEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOChSinkConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual row that contains the Sink (Rs) configuration
         parameters for a given interface."
    INDEX  { ifIndex  }
    ::= { jnxoptIfOChSinkConfigTable 1 }

JnxoptIfOChSinkConfigEntry ::=
    SEQUENCE {
        jnxoptIfOChSinkMinimumMeanIntputPower            Integer32,
        jnxoptIfOChSinkMaximumMeanIntputPower            Integer32,
        jnxoptIfOChSinkMinimumOSNR                       Integer32,
        jnxoptIfOChSinkOSNRTolerance                     Integer32
    }

jnxoptIfOChSinkMinimumMeanIntputPower OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.01 dbm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        " The minimum values of the average received power (in dbm
          at point the Sink (Rs)."
    ::= { jnxoptIfOChSinkConfigEntry  1}

jnxoptIfOChSinkMaximumMeanIntputPower OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.01 dbm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum values of the average received power (in dbm)
         at point the Sink (Rs)."
    ::= { jnxoptIfOChSinkConfigEntry  2}

jnxoptIfOChSinkMinimumOSNR OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimum optical signal-to-noise ratio (OSNR) is the minimum
         value of the ratio of the signal power in the wanted channel to
         the highest noise power density in the range of the central
         frequency plus and minus the maximum spectral excursion."
    ::= { jnxoptIfOChSinkConfigEntry  3}

jnxoptIfOChSinkOSNRTolerance OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The receiver OSNR tolerance is defined as the minimum value of
         OSNR at point Sink (Rs) that can be tolerated while maintaining the
         maximum BER of the application. Sink (Rs)."
    ::= { jnxoptIfOChSinkConfigEntry  4}





-- Performance Monitoring

-- The OptIfOChSinkCurrentExtEntry table is an extension to the
-- jnxoptIfOChSinkCurrentExtEntry
-- following optional parameters for current status
-- OptIfOChSinkCurrentExtEntry

jnxoptIfOChSinkCurrentExtTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOChSinkCurrentExtEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of OCh sink etxension to the performance monitoring
         information for the current 15-minute interval."
    ::= { jnxoptIfOTNPMGroup 1 }


jnxoptIfOChSinkCurrentExtEntry OBJECT-TYPE
    SYNTAX  JnxoptIfOChSinkCurrentExtEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual row that contains OCh sink performance
         monitoring information for an interface for the current
         15-minute interval."
    AUGMENTS { jnxoptIfOChSinkCurrentEntry }
    ::= { jnxoptIfOChSinkCurrentExtTable 1 }



JnxoptIfOChSinkCurrentExtEntry ::=
    SEQUENCE {
        jnxoptIfOChSinkCurrentChromaticDispersion        Integer32,
        jnxoptIfOChSinkCurrentOSNR                       Integer32,
        jnxoptIfOChSinkCurrentQ                          Integer32
    }

jnxoptIfOChSinkCurrentChromaticDispersion OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "ps/nm"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Residual Chromatic Dispersion measured at Rx Transceiver port."
    ::= { jnxoptIfOChSinkCurrentExtEntry  1}

jnxoptIfOChSinkCurrentOSNR OBJECT-TYPE
    SYNTAX  Integer32
    UNITS      "0.1 dB"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current Optical Signal to Noise Ratio (OSNR) estimated at Rx
            Transceiver port ."
    ::= { jnxoptIfOChSinkCurrentExtEntry  2}

jnxoptIfOChSinkCurrentQ  OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "'Q' factor estimated at Rx Transceiver port."
    ::= { jnxoptIfOChSinkCurrentExtEntry  3}

-- Performance Monitoring
-- OTN  PM Config Table
--

--

jnxoptIfOTNPMConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of performance monitoring configuration for the type
         'jnxoptIfOTNPMConfigLayer' layer."
    ::= { jnxoptIfOTNPMGroup 2 }

jnxoptIfOTNPMConfigEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the performance monitoring configuration
         for the type 'jnxoptIfOTNPMConfigLayer' layer."
    INDEX  { ifIndex, jnxoptIfOTNPMConfigType, jnxoptIfOTNPMConfigLayer,
             jnxoptIfOTNPMConfigTCMLevel  }
    ::= { jnxoptIfOTNPMConfigTable 1 }

JnxoptIfOTNPMConfigEntry ::=
    SEQUENCE {
        jnxoptIfOTNPMConfigType                   JnxoptIfOTNType,
        jnxoptIfOTNPMConfigLayer                  JnxoptIfOTNLayer,
        jnxoptIfOTNPMConfigTCMLevel               Unsigned32,
        jnxoptIfOTNPMESRInterval                  Unsigned32,
        jnxoptIfOTNPMSESRInterval                 Unsigned32,
        jnxoptIfOTNPMValidIntervals               Unsigned32,
        jnxoptIfOTNPM15MinBip8Threshold           Unsigned32,
        jnxoptIfOTNPM15MinESsThreshold            Unsigned32,
        jnxoptIfOTNPM15MinSESsThreshold           Unsigned32,
        jnxoptIfOTNPM15MinUASsThreshold           Unsigned32,
        jnxoptIfOTNPM15MinBBEsThreshold           Unsigned32,
        jnxoptIfOTNPM24HourBip8Threshold          Unsigned32,
        jnxoptIfOTNPM24HourESsThreshold           Unsigned32,
        jnxoptIfOTNPM24HourSESsThreshold          Unsigned32,
        jnxoptIfOTNPM24HourUASsThreshold          Unsigned32,
        jnxoptIfOTNPM24HourBBEsThreshold          Unsigned32,
        jnxoptIfOTNPMBip8EnableTCA                TruthValue,
        jnxoptIfOTNPMESsEnableTCA                 TruthValue,
        jnxoptIfOTNPMSESsEnableTCA                TruthValue,
        jnxoptIfOTNPMUASsEnableTCA                TruthValue,
        jnxoptIfOTNPMBBEsEnableTCA                TruthValue
    }

jnxoptIfOTNPMConfigType       OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS not-accessible 
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMConfigEntry  1}

jnxoptIfOTNPMConfigLayer   OBJECT-TYPE
    SYNTAX  JnxoptIfOTNLayer
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for OTUk,
         ODUk, TCMn performance data.
         1 - OTUk
         2 - ODUk
         3 - TCM
         The ODUk/TCM sublayer PM is not related to the black link PM
         management, but since this is a common PM model for the ODU/TCM layer,
         we may include it here."
    ::= { jnxoptIfOTNPMConfigEntry  2}

jnxoptIfOTNPMConfigTCMLevel   OBJECT-TYPE
    SYNTAX  Unsigned32 (0..6)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the TCM level (1-6)
         if the PM is of the type TCM. This will be 0 for OTUK/ODUK."
    ::= { jnxoptIfOTNPMConfigEntry  3}

jnxoptIfOTNPMESRInterval  OBJECT-TYPE
    SYNTAX  Unsigned32 (1..96)
    UNITS "seconds"
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This parameter indicates the measurement interval
         for error seconds ratio."
    ::= {jnxoptIfOTNPMConfigEntry  4}

jnxoptIfOTNPMSESRInterval  OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS "seconds"
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This parameter indicates the measurement interval
         for severely error seconds ratio."
    ::= {jnxoptIfOTNPMConfigEntry  5}

jnxoptIfOTNPMValidIntervals OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of contiguous 15 minute intervals for which valid
         PM data is available for the particular interface."
    ::= { jnxoptIfOTNPMConfigEntry 6 }

jnxoptIfOTNPM15MinBip8Threshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of Bip8 encountered by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be
         sent per interval per interface. A value of `0' will disable the
         notification."
    ::= { jnxoptIfOTNPMConfigEntry  7 }

jnxoptIfOTNPM15MinESsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of ES encountered by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshEsTCA. One notification will be
         sent per interval per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry 8 }

jnxoptIfOTNPM15MinSESsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of SES encountered by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshSESTCA. One notification will be
         sent per interval per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry 9 }


jnxoptIfOTNPM15MinUASsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of UAS encountered by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshUASTCA. One notification will be
         sent per interval per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry  10 }

jnxoptIfOTNPM15MinBBEsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of UAS encountered by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshBBETCA. One notification will be
         sent per interval per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry  11 }

jnxoptIfOTNPM24HourBip8Threshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of Bip8 encountered by the interface within any
         given 24 Hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshBip8TCA. One notification will be
         sent per interval per interface. A value of `0' will disable the
         notification."
    ::= { jnxoptIfOTNPMConfigEntry  12 }

jnxoptIfOTNPM24HourESsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of ES encountered by the interface within any
         given 24 hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf24HourThreshEsTCA. One notification will be
         sent per 24 hour per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry 13 }

jnxoptIfOTNPM24HourSESsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of SES encountered by the interface within any
         given 24 hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf24HourThreshSESsTCA. One notification will be
         sent per 24 hour per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry 14 }

jnxoptIfOTNPM24HourUASsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of SES encountered by the interface within any
         given 24 hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf24HourThreshUASsTCA. One notification will be
         sent per 24 hour per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry 15 }

jnxoptIfOTNPM24HourBBEsThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The number of BBE encountered by the interface within any
         given 24 hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf24HourThreshBBEsTCA. One notification will be
         sent per 24 hour per interface. A value of `0' will disable the
         notification."
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry 16 }

jnxoptIfOTNPMBip8EnableTCA  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable TCA's - 15minute and 24hr for Bip8 "
    ::= { jnxoptIfOTNPMConfigEntry  17 }

jnxoptIfOTNPMESsEnableTCA  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable TCA's - 15minute and 24hr for ESs "
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry  18 }

jnxoptIfOTNPMSESsEnableTCA  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable TCA's - 15minute and 24hr for SESs "
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry  19 }

jnxoptIfOTNPMUASsEnableTCA  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable TCA's - 15minute and 24hr for UASs "
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry  20 }

jnxoptIfOTNPMBBEsEnableTCA  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable TCA's - 15minute and 24hr for BBEs "
    --
    --
    --
    ::= { jnxoptIfOTNPMConfigEntry  21 }


--
-- PM Current Entry  at either the OTU/ODUk/TCM
--
jnxoptIfOTNPMCurrentTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table for the Performance monitoring Current Table."
    ::= {jnxoptIfOTNPMGroup 3}

jnxoptIfOTNPMCurrentEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
       "A conceptual entry in the Near end or Far End performance monitoring
        Current table for the type 'jnxoptIfOTNPMCurrentLayer' layer."
    INDEX  { ifIndex, jnxoptIfOTNPMCurrentType ,
             jnxoptIfOTNPMCurrentLayer, jnxoptIfOTNPMCurrentTCMLevel  }
    ::= { jnxoptIfOTNPMCurrentTable 1 }

JnxoptIfOTNPMCurrentEntry ::=
    SEQUENCE {
        jnxoptIfOTNPMCurrentType                        JnxoptIfOTNType,
        jnxoptIfOTNPMCurrentLayer                       JnxoptIfOTNLayer,
        jnxoptIfOTNPMCurrentTCMLevel                    Unsigned32,
        jnxoptIfOTNPMCurrentSuspectedFlag               TruthValue,
        jnxoptIfOTNPMCurrentBip8                        Unsigned32,
        jnxoptIfOTNPMCurrentESs                         Unsigned32,
        jnxoptIfOTNPMCurrentSESs                        Unsigned32,
        jnxoptIfOTNPMCurrentUASs                        Unsigned32,
        jnxoptIfOTNPMCurrentBBEs                        Unsigned32,
        jnxoptIfOTNPMCurrentESR                         Unsigned32,
        jnxoptIfOTNPMCurrentSESR                        Unsigned32,
        jnxoptIfOTNPMCurrentBBER                        Unsigned32,
        jnxoptIfOTNPMCurrentElapsedTime                 Unsigned32,
        jnxoptIfOTNPMCurSuspectReason                   Integer32
    }

jnxoptIfOTNPMCurrentType           OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the Near
         End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMCurrentEntry  1}

jnxoptIfOTNPMCurrentLayer   OBJECT-TYPE
    SYNTAX  JnxoptIfOTNLayer
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for OTUk,
         ODUk, TCMn performance data.
         1 - OTUk (OCh which is used for the black link)
         2 - ODUk
         3 - TCM
         The ODUk/TCM sublayer PM is not related to the black link PM
         management, but since this is a common PM model for the ODU/TCM layer,
         we may include it here."
    ::= { jnxoptIfOTNPMCurrentEntry  2}

jnxoptIfOTNPMCurrentTCMLevel   OBJECT-TYPE
    SYNTAX  Unsigned32 (0..6)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the TCM level (1-6)
         if the PM is of the type TCM. This will be 0 for OTUK/ODUK."
    ::= { jnxoptIfOTNPMCurrentEntry  3}


jnxoptIfOTNPMCurrentSuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
    ::= { jnxoptIfOTNPMCurrentEntry  4}

jnxoptIfOTNPMCurrentBip8   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of Failures occurred in an observation period."
    ::= { jnxoptIfOTNPMCurrentEntry  5}

jnxoptIfOTNPMCurrentESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the number of seconds in which one or more bits are in
         error or during which Loss of Signal (LOS) or Alarm Indication
         Signal (AIS) is detected."
    ::= { jnxoptIfOTNPMCurrentEntry  6}

jnxoptIfOTNPMCurrentSESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of seconds which have a severe error.
         This is the number of seconds in which the bit-error ratio =
         1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
         Indication Signal (AIS) is detected."
    ::= { jnxoptIfOTNPMCurrentEntry  7}

jnxoptIfOTNPMCurrentUASs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "It is the number of unavailable seconds.
         A period of unavailable time begins at the onset of ten
         consecutive SES events.  These ten seconds are considered to be
         part of unavailable time.  A new period of available time begins
         at the onset of ten consecutive non-SES events.  These ten seconds
         are considered to be part of available time."
    ::= { jnxoptIfOTNPMCurrentEntry  8}

jnxoptIfOTNPMCurrentBBEs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "An errored block not occurring as part of an SES."
    ::= { jnxoptIfOTNPMCurrentEntry  9}
 
jnxoptIfOTNPMCurrentESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of ES in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMCurrentEntry  10}


jnxoptIfOTNPMCurrentSESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of SES in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMCurrentEntry  11}

jnxoptIfOTNPMCurrentBBER OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of BER in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMCurrentEntry 12 }

jnxoptIfOTNPMCurrentElapsedTime OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  "seconds"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Time elapsed for this 15 minute interval"
    ::= { jnxoptIfOTNPMCurrentEntry 13 }

jnxoptIfOTNPMCurSuspectReason OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - interface disabled
          4 - clock shift detected
          5 - cleared by user
          6 - interval too short secs < 890
          7 - interval too long secs > 910
          8 - near end unavailable
          9 - far end unavailable
         10 - partial data
         11 - missing intervals due to restarts
        "
    ::= { jnxoptIfOTNPMCurrentEntry 14 }

--
-- OTN PM Interval Table
-- Upto 96 15-minute intervals
--
jnxoptIfOTNPMIntervalTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring Interval Table."
    ::= { jnxoptIfOTNPMGroup 4 }

jnxoptIfOTNPMIntervalEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance monitoring
         Interval table for the type 'jnxoptIfOTNPMIntervalLayer' layer."
    INDEX  { ifIndex, jnxoptIfOTNPMIntervalType, jnxoptIfOTNPMIntervalLayer,
             jnxoptIfOTNPMIntervalTCMLevel, jnxoptIfOTNPMIntervalNumber  }
    ::= { jnxoptIfOTNPMIntervalTable 1 }

JnxoptIfOTNPMIntervalEntry  ::=
    SEQUENCE {
        jnxoptIfOTNPMIntervalType                      JnxoptIfOTNType,
        jnxoptIfOTNPMIntervalLayer                     JnxoptIfOTNLayer,
        jnxoptIfOTNPMIntervalTCMLevel                  Unsigned32,
        jnxoptIfOTNPMIntervalNumber                    Unsigned32,
        jnxoptIfOTNPMIntervalSuspectedFlag             TruthValue,
        jnxoptIfOTNPMIntervalBip8                      Unsigned32,
        jnxoptIfOTNPMIntervalESs                       Unsigned32,
        jnxoptIfOTNPMIntervalSESs                      Unsigned32,
        jnxoptIfOTNPMIntervalUASs                      Unsigned32,
        jnxoptIfOTNPMIntervalBBEs                      Unsigned32,
        jnxoptIfOTNPMIntervalESR                       Unsigned32,
        jnxoptIfOTNPMIntervalSESR                      Unsigned32,
        jnxoptIfOTNPMIntervalBBER                      Unsigned32,
        jnxoptIfOTNPMIntervalTimeStamp                 DateAndTime,
        jnxoptIfOTNPMIntSuspectReason                  Integer32
    }

jnxoptIfOTNPMIntervalType         OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMIntervalEntry  1}

jnxoptIfOTNPMIntervalLayer   OBJECT-TYPE
    SYNTAX  JnxoptIfOTNLayer
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for OTUk,
         ODUk, TCMn performance data.
         1 - OTUk
         2  - ODUk
         3 - TCM
         The ODUk/TCM sublayer PM is not related to the black link PM
         management, but since this is a common  PM model for the ODU/TCM
         layer, we may include it here."
    ::= { jnxoptIfOTNPMIntervalEntry  2}

jnxoptIfOTNPMIntervalTCMLevel   OBJECT-TYPE
    SYNTAX  Unsigned32 (0..6)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the TCM level (1-6)
         if the PM is of the type TCM. This will be 0 for OTUK/ODUK."
    ::= { jnxoptIfOTNPMIntervalEntry  3}

jnxoptIfOTNPMIntervalNumber   OBJECT-TYPE
    SYNTAX  Unsigned32 (1..96)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A number between 1 and 96, where 1 is the most
         recently completed 15 minute interval and 96 is
         the 15 minutes interval completed 23 hours and 45
         minutes prior to interval 1."
    ::= { jnxoptIfOTNPMIntervalEntry  4}

jnxoptIfOTNPMIntervalSuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
    ::= { jnxoptIfOTNPMIntervalEntry  5}
 
jnxoptIfOTNPMIntervalBip8   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of Failures occurred in an observation period."
    ::= { jnxoptIfOTNPMIntervalEntry  6}

jnxoptIfOTNPMIntervalESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "It is a one-second period in which one or more bits are in error
         or during which Loss of Signal (LOS) or Alarm Indication Signal
         (AIS) is detected."
    ::= { jnxoptIfOTNPMIntervalEntry  7}


jnxoptIfOTNPMIntervalSESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of seconds which have a severe error.
         It is a one-second period which has a bit-error ratio =
         1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
         Indication Signal (AIS) is detected."
    ::= { jnxoptIfOTNPMIntervalEntry  8}

jnxoptIfOTNPMIntervalUASs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "It is the number of unavailable seconds in this 15 minute interval.
         A period of unavailable time begins at the onset of ten
         consecutive SES events.  These ten seconds are considered to be
         part of unavailable time.  A new period of available time begins
         at the onset of ten consecutive non-SES events.  These ten seconds
         are considered to be part of available time."
    ::= { jnxoptIfOTNPMIntervalEntry  9}

jnxoptIfOTNPMIntervalBBEs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "An errored block not occurring as part of an SES."
    ::= { jnxoptIfOTNPMIntervalEntry  10}

jnxoptIfOTNPMIntervalESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of ES in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMIntervalEntry  11}
 
jnxoptIfOTNPMIntervalSESR   OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of SES in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMIntervalEntry  12}

jnxoptIfOTNPMIntervalBBER   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of BBE in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMIntervalEntry  13}

jnxoptIfOTNPMIntervalTimeStamp  OBJECT-TYPE
    SYNTAX  DateAndTime
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Time stamp of this interval."
    ::= { jnxoptIfOTNPMIntervalEntry  14}
  
jnxoptIfOTNPMIntSuspectReason  OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - interface disabled
          4 - clock shift detected
          5 - cleared by user
          6 - interval too short secs < 890
          7 - interval too long secs > 910
          8 - near end unavailable
          9 - far end unavailable
         10 - partial data
         11 - missing intervals due to restarts

        "
    ::= { jnxoptIfOTNPMIntervalEntry  15}
--
-- PM Current Day Entry
--
jnxoptIfOTNPMCurrentDayTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMCurrentDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring Current Day Table."
    ::= { jnxoptIfOTNPMGroup  5 }
 

jnxoptIfOTNPMCurrentDayEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMCurrentDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance
         monitoring Current day table for the type
         'jnxoptIfOTNPMCurrentDayLayer'  layer."
    INDEX { ifIndex, jnxoptIfOTNPMCurrentDayType, jnxoptIfOTNPMCurrentDayLayer,
            jnxoptIfOTNPMCurrentDayTCMLevel  }
    ::= { jnxoptIfOTNPMCurrentDayTable 1 }

JnxoptIfOTNPMCurrentDayEntry  ::=
    SEQUENCE {
        jnxoptIfOTNPMCurrentDayType                   JnxoptIfOTNType,
        jnxoptIfOTNPMCurrentDayLayer                  JnxoptIfOTNLayer,
        jnxoptIfOTNPMCurrentDayTCMLevel               Unsigned32,
        jnxoptIfOTNPMCurrentDaySuspectedFlag          TruthValue,
        jnxoptIfOTNPMCurrentDayBip8                   Unsigned32,
        jnxoptIfOTNPMCurrentDayESs                    Unsigned32,
        jnxoptIfOTNPMCurrentDaySESs                   Unsigned32,
        jnxoptIfOTNPMCurrentDayUASs                   Unsigned32,
        jnxoptIfOTNPMCurrentDayBBEs                   Unsigned32,
        jnxoptIfOTNPMCurrentDayESR                    Unsigned32,
        jnxoptIfOTNPMCurrentDaySESR                   Unsigned32,
        jnxoptIfOTNPMCurrentDayBBER                   Unsigned32,
        jnxoptIfOTNPMCurrentDayElapsedTime            Unsigned32,
        jnxoptIfOTNPMCurDaySuspectReason              Integer32
    }

jnxoptIfOTNPMCurrentDayType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for
         the Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMCurrentDayEntry  1}

jnxoptIfOTNPMCurrentDayLayer   OBJECT-TYPE
    SYNTAX  JnxoptIfOTNLayer
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for OTUk,
         ODUk, TCMn performance data.
         1 - OTUk
         2 - ODUk
         3 - TCM
         The ODUk/TCM sublayer PM is not related to the black link PM
         management, but since this is a common PM model for the ODU/TCM layer,
         we may include it here."
    ::= { jnxoptIfOTNPMCurrentDayEntry  2}

jnxoptIfOTNPMCurrentDayTCMLevel   OBJECT-TYPE
    SYNTAX  Unsigned32 (0..6)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the TCM level (1-6)
         if the PM is of the type TCM. This will be 0 for OTUK/ODUK."
    ::= { jnxoptIfOTNPMCurrentDayEntry  3}


jnxoptIfOTNPMCurrentDaySuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
  ::= { jnxoptIfOTNPMCurrentDayEntry  4}

jnxoptIfOTNPMCurrentDayBip8   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of Failures occurred in an observation period."
    ::= { jnxoptIfOTNPMCurrentDayEntry  5}



jnxoptIfOTNPMCurrentDayESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of seconds which have an error.
         It is a one-second period in which one or more bits are in error
         or during which Loss of Signal (LOS) or Alarm Indication Signal
         (AIS) is detected."
    ::= { jnxoptIfOTNPMCurrentDayEntry  6}

jnxoptIfOTNPMCurrentDaySESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of seconds which have a severe error.
         It is a one-second period which has a bit-error ratio =
         1x10Eminus3 or during which Loss of Signal (LOS) or Alarm
         Indication Signal (AIS) is detected."
    ::= { jnxoptIfOTNPMCurrentDayEntry  7}

jnxoptIfOTNPMCurrentDayUASs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "It is the number of unavailable seconds in the cunrrent day.
         A period of unavailable time begins at the onset of ten
         consecutive SES events.  These ten seconds are considered to be
         part of unavailable time.  A new period of available time begins
         at the onset of ten consecutive non-SES events. These ten seconds
         are considered to be part of available time."
    ::= { jnxoptIfOTNPMCurrentDayEntry  8}

jnxoptIfOTNPMCurrentDayBBEs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "An errored block not occurring as part of an SES."
    ::= { jnxoptIfOTNPMCurrentDayEntry  9}

jnxoptIfOTNPMCurrentDayESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of ES in available time to total seconds in available
        time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMCurrentDayEntry  10}

jnxoptIfOTNPMCurrentDaySESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of SES in available time to total seconds in available
        time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMCurrentDayEntry  11}
 
jnxoptIfOTNPMCurrentDayBBER   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of BBE in available time to total seconds in available
        time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMCurrentDayEntry  12}

jnxoptIfOTNPMCurrentDayElapsedTime  OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Time elapsed for current day"
    ::= { jnxoptIfOTNPMCurrentDayEntry  13 }

jnxoptIfOTNPMCurDaySuspectReason  OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - interface disabled
          4 - clock shift detected
          5 - cleared by user
          6 - partial data
          7 - one or more intervals are invaild
        "
    ::= { jnxoptIfOTNPMCurrentDayEntry  14 }

--
-- PM Prev Day Entry
--
jnxoptIfOTNPMPrevDayTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMPrevDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring Previous Day Table."
    ::= { jnxoptIfOTNPMGroup 6 }

jnxoptIfOTNPMPrevDayEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMPrevDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance
         monitoring previous day table for the type
         'jnxoptIfOTNPMPrevDayLayer' layer."
    INDEX  { ifIndex, jnxoptIfOTNPMPrevDayType     ,
             jnxoptIfOTNPMPrevDayLayer, jnxoptIfOTNPMPrevDayTCMLevel  }
    ::= { jnxoptIfOTNPMPrevDayTable 1 }

JnxoptIfOTNPMPrevDayEntry  ::=
    SEQUENCE {
        jnxoptIfOTNPMPrevDayType                      JnxoptIfOTNType,
        jnxoptIfOTNPMPrevDayLayer                     JnxoptIfOTNLayer,
        jnxoptIfOTNPMPrevDayTCMLevel                  Unsigned32,
        jnxoptIfOTNPMPrevDaySuspectedFlag             TruthValue,
        jnxoptIfOTNPMPrevDayBip8                      Unsigned32,
        jnxoptIfOTNPMPrevDayESs                       Unsigned32,
        jnxoptIfOTNPMPrevDaySESs                      Unsigned32,
        jnxoptIfOTNPMPrevDayUASs                      Unsigned32,
        jnxoptIfOTNPMPrevDayBBEs                      Unsigned32,
        jnxoptIfOTNPMPrevDayESR                       Unsigned32,
        jnxoptIfOTNPMPrevDaySESR                      Unsigned32,
        jnxoptIfOTNPMPrevDayBBER                      Unsigned32,
        jnxoptIfOTNPMPrevDayTimeStamp                 DateAndTime,
        jnxoptIfOTNPMPrevDaySuspectReason             Integer32

    }

jnxoptIfOTNPMPrevDayType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMPrevDayEntry  1}

jnxoptIfOTNPMPrevDayLayer   OBJECT-TYPE
    SYNTAX  JnxoptIfOTNLayer
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for OTUk,
         ODUk, TCMn performance data.
         1 - OTUk
         2 - ODUk
         3 - TCM
         The ODUk/TCM sublayer PM is not related to the black link PM
         management, but since this is a common PM model for the ODU/TCM
         layer, we may include it here."
    ::= { jnxoptIfOTNPMPrevDayEntry  2}

jnxoptIfOTNPMPrevDayTCMLevel   OBJECT-TYPE
    SYNTAX  Unsigned32 (0..6)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the TCM level (1-6)
         if the PM is of the type TCM."
    ::= { jnxoptIfOTNPMPrevDayEntry  3}


jnxoptIfOTNPMPrevDaySuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
  ::= { jnxoptIfOTNPMPrevDayEntry  4}

jnxoptIfOTNPMPrevDayBip8   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of pre FEC failures occurred in an observation period."
    ::= { jnxoptIfOTNPMPrevDayEntry  5}

jnxoptIfOTNPMPrevDayESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of seconds which have an error.
         It is a one-second period in which one or more bits are in error
         or during which Loss of Signal (LOS) or Alarm Indication Signal
         (AIS) is detected."
    ::= { jnxoptIfOTNPMPrevDayEntry  6}

jnxoptIfOTNPMPrevDaySESs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of seconds which have a severe error.
         A severely errored second, is a one-second period which has
         a bit-error ratio = 1x10Eminus3 or during which Loss of Signal (LOS)
         or Alarm Indication Signal (AIS) is detected."
    ::= { jnxoptIfOTNPMPrevDayEntry  7}

jnxoptIfOTNPMPrevDayUASs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "It is the number of unavailable seconds in the previous day.
         A period of unavailable time begins at the onset of ten
         consecutive SES events.  These ten seconds are considered to be
         part of unavailable time.  A new period of available time begins
         at the onset of ten consecutive non-SES events.  These ten seconds
         are considered to be part of available time."
    ::= { jnxoptIfOTNPMPrevDayEntry  8}

jnxoptIfOTNPMPrevDayBBEs   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "An errored block not occurring as part of an SES."
    ::= { jnxoptIfOTNPMPrevDayEntry  9}

jnxoptIfOTNPMPrevDayESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of ES in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMPrevDayEntry  10}

jnxoptIfOTNPMPrevDaySESR   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of SES in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMPrevDayEntry  11}

jnxoptIfOTNPMPrevDayBBER   OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  ".001"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ratio of BBE in available time to total seconds in available
         time during a fixed measurement interval."
    ::= { jnxoptIfOTNPMPrevDayEntry  12}

jnxoptIfOTNPMPrevDayTimeStamp  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Time stamp of this interval."
    ::= { jnxoptIfOTNPMPrevDayEntry  13}

jnxoptIfOTNPMPrevDaySuspectReason  OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - clock shift detected
          4 - cleared by user
          5 - partial data
          6 - missing intervals due to restarts
          7 - one or more intervals are invaild
        "
    ::= { jnxoptIfOTNPMPrevDayEntry  14 }

--
-- OTN FEC PM Config Table
--
jnxoptIfOTNPMFECConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMFECConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table of performance monitoring  FEC configuration."
    ::= { jnxoptIfOTNPMGroup 7 }

jnxoptIfOTNPMFECConfigEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMFECConfigEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the performance monitoring FEC configuration
         layer."
    INDEX  { ifIndex, jnxoptIfOTNPMFECConfigType }
    ::= { jnxoptIfOTNPMFECConfigTable 1 }

JnxoptIfOTNPMFECConfigEntry  ::=
    SEQUENCE {
        jnxoptIfOTNPMFECConfigType                      JnxoptIfOTNType,
        jnxoptIfOTNPMFECValidIntervals                  Unsigned32,
        jnxoptIfOTNPM15MinPreFECBERMantissaThreshold    Unsigned32,
        jnxoptIfOTNPM15MinPreFECBERExponentThreshold    Unsigned32,
        jnxoptIfOTNPM24HourPreFECBERMantissaThreshold   Unsigned32,
        jnxoptIfOTNPM24HourPreFECBERExponentThreshold   Unsigned32,
        jnxoptIfOTNPMFECBEREnableTCA                    TruthValue
    }

jnxoptIfOTNPMFECConfigType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMFECConfigEntry  1}

jnxoptIfOTNPMFECValidIntervals  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of contiguous 15 minute intervals for which valid FEC
         PM data is available for the particular interface."
    ::= {jnxoptIfOTNPMFECConfigEntry  2}

jnxoptIfOTNPM15MinPreFECBERMantissaThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "BER (mantissa) by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification
         will be sent per interval per interface. A value of `0' will disable
         the notification."
    ::= {jnxoptIfOTNPMFECConfigEntry  3}

jnxoptIfOTNPM15MinPreFECBERExponentThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Pre FEC BER (exponent) by the interface within any
         given 15 minutes performance data collection period, which causes the
         SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification
         will be sent per interval per interface. A value of `0' will disable
         the notification."
    ::= {jnxoptIfOTNPMFECConfigEntry  4}

jnxoptIfOTNPM24HourPreFECBERMantissaThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "BER (mantissa) by the interface within any
         given 24 Hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. 
         One notification will be sent per 24 hour period per interface. 
         A value of `0' will disable the notification."
    ::= {jnxoptIfOTNPMFECConfigEntry  5}

jnxoptIfOTNPM24HourPreFECBERExponentThreshold  OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Pre FEC BER (exponent) by the interface within any
         given 24 Hour performance data collection period, which causes the
         SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
         One notification will be sent per 24 hour period per interface.
         A value of `0' will disable the notification."
    ::= {jnxoptIfOTNPMFECConfigEntry  6}

jnxoptIfOTNPMFECBEREnableTCA  OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable TCA's - 15minute and 24hr for FEC BER "
    ::= { jnxoptIfOTNPMFECConfigEntry 7 }

--
-- FEC PM Table
--
jnxoptIfOTNPMFECCurrentTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMFECCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring FEC Current Table."
    ::= { jnxoptIfOTNPMGroup 8 }

jnxoptIfOTNPMFECCurrentEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMFECCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance
         monitoring FEC current table."
    INDEX  { ifIndex, jnxoptIfOTNPMFECCurrentType}
    ::= { jnxoptIfOTNPMFECCurrentTable  1 }

JnxoptIfOTNPMFECCurrentEntry  ::=
    SEQUENCE {
        jnxoptIfOTNPMFECCurrentType                     JnxoptIfOTNType,
        jnxoptIfOTNPMFECCurrentSuspectedFlag            TruthValue,
        jnxoptIfOTNPMCurrentFECCorrectedErr             Counter64,
        jnxoptIfOTNPMCurrentFECUncorrectedWords         Counter64,
        jnxoptIfOTNPMCurrentFECBERMantissa              Unsigned32,
        jnxoptIfOTNPMCurrentFECBERExponent              Unsigned32,
        jnxoptIfOTNPMCurrentFECMinBERMantissa           Unsigned32,
        jnxoptIfOTNPMCurrentFECMinBERExponent           Unsigned32,
        jnxoptIfOTNPMCurrentFECMaxBERMantissa           Unsigned32,
        jnxoptIfOTNPMCurrentFECMaxBERExponent           Unsigned32,
        jnxoptIfOTNPMCurrentFECAvgBERMantissa           Unsigned32,
        jnxoptIfOTNPMCurrentFECAvgBERExponent           Unsigned32,
        jnxoptIfOTNPMCurrentFECElapsedTime              Unsigned32,
        jnxoptIfOTNPMFECCurSuspectReason                Integer32
    }

jnxoptIfOTNPMFECCurrentType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMFECCurrentEntry  1}


jnxoptIfOTNPMFECCurrentSuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
    ::= { jnxoptIfOTNPMFECCurrentEntry  2}

jnxoptIfOTNPMCurrentFECCorrectedErr   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bits corrected by the FEC are counted in the
         interval."
    ::= { jnxoptIfOTNPMFECCurrentEntry  3}

jnxoptIfOTNPMCurrentFECUncorrectedWords   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of un-corrected words by the FEC are counted over the
         interval."
    ::= { jnxoptIfOTNPMFECCurrentEntry  4}

jnxoptIfOTNPMCurrentFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of Errored bits at receiving side before the FEC
         function counted over one second .. mantissa."
    ::= { jnxoptIfOTNPMFECCurrentEntry  5}

jnxoptIfOTNPMCurrentFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of Errored bits at receiving side before the FEC
         function counted over one second .. exponent (eg -1)."
    ::= { jnxoptIfOTNPMFECCurrentEntry  6}

jnxoptIfOTNPMCurrentFECMinBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimum number of Errored bits at receiving side before the FEC
         function counted over one second .. mantissa."
    ::= { jnxoptIfOTNPMFECCurrentEntry  7}

jnxoptIfOTNPMCurrentFECMinBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimum number of Errored bits at receiving side before the FEC
         function counted over one second .. exponent (eg -1)."
    ::= { jnxoptIfOTNPMFECCurrentEntry  8}

jnxoptIfOTNPMCurrentFECMaxBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of Errored bits at receiving side before the FEC
         function counted over one second .. mantissa."
    ::= { jnxoptIfOTNPMFECCurrentEntry  9}

jnxoptIfOTNPMCurrentFECMaxBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of Errored bits at receiving side before the FEC
         function counted over one second .. exponent (eg -1)."
    ::= { jnxoptIfOTNPMFECCurrentEntry  10}

jnxoptIfOTNPMCurrentFECAvgBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average number of Errored bits at receiving side before the FEC
         function counted over one second .. mantissa."
    ::= { jnxoptIfOTNPMFECCurrentEntry  11}

jnxoptIfOTNPMCurrentFECAvgBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average number of Errored bits at receiving side before the FEC
         function counted over one second .. exponent (eg -1)."
    ::= { jnxoptIfOTNPMFECCurrentEntry  12}

jnxoptIfOTNPMCurrentFECElapsedTime    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Time elapsed for this 15 minute interval."
    ::= { jnxoptIfOTNPMFECCurrentEntry 13 }

jnxoptIfOTNPMFECCurSuspectReason OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - interface disabled
          4 - clock shift detected
          5 - cleared by user
          6 - interval too short secs < 890
          7 - interval too long secs > 910
          8 - near end unavailable
          9 - far end unavailable
         10 - partial data
         11 - missing intervals due to restarts
        "
    ::= { jnxoptIfOTNPMFECCurrentEntry 14 }
--
-- FEC PM  Interval Table
--
jnxoptIfOTNPMFECIntervalTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMFECIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring FEC Interval Table."
    ::= { jnxoptIfOTNPMGroup 9 }
 
jnxoptIfOTNPMFECIntervalEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMFECIntervalEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance
         monitoring FEC interval table."
    INDEX  { ifIndex, jnxoptIfOTNPMFECIntervalType,
             jnxoptIfOTNPMFECIntervalNumber }
    ::= { jnxoptIfOTNPMFECIntervalTable 1 }

JnxoptIfOTNPMFECIntervalEntry ::=
    SEQUENCE {
        jnxoptIfOTNPMFECIntervalType                   JnxoptIfOTNType,
        jnxoptIfOTNPMFECIntervalNumber                 Unsigned32,
        jnxoptIfOTNPMFECIntervalSuspectedFlag          TruthValue,
        jnxoptIfOTNPMIntervalFECCorrectedErr           Counter64,
        jnxoptIfOTNPMIntervalFECUncorrectedWords       Counter64,
        jnxoptIfOTNPMIntervalMinFECBERMantissa         Unsigned32,
        jnxoptIfOTNPMIntervalMinFECBERExponent         Unsigned32,
        jnxoptIfOTNPMIntervalMaxFECBERMantissa         Unsigned32,
        jnxoptIfOTNPMIntervalMaxFECBERExponent         Unsigned32,
        jnxoptIfOTNPMIntervalAvgFECBERMantissa         Unsigned32,
        jnxoptIfOTNPMIntervalAvgFECBERExponent         Unsigned32,
        jnxoptIfOTNPMFECIntervalTimeStamp              DateAndTime,
        jnxoptIfOTNPMFECIntSuspectReason               Integer32
    }

jnxoptIfOTNPMFECIntervalType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMFECIntervalEntry  1}

jnxoptIfOTNPMFECIntervalNumber   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS not-accessible 
    STATUS  current
    DESCRIPTION
        "A number between 1 and 96, where 1 is the most
         recently completed 15 minute interval and 96 is
         the 15 minutes interval completed 23 hours and 45
         minutes prior to interval 1."
    ::= { jnxoptIfOTNPMFECIntervalEntry  2}

jnxoptIfOTNPMFECIntervalSuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
    ::= { jnxoptIfOTNPMFECIntervalEntry  3}

jnxoptIfOTNPMIntervalFECCorrectedErr   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bits corrected by the FEC are counted in the
         interval."
    ::= { jnxoptIfOTNPMFECIntervalEntry  4}

jnxoptIfOTNPMIntervalFECUncorrectedWords   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of words un-corrected words by the FEC are counted over
         the interval."
    ::= { jnxoptIfOTNPMFECIntervalEntry  5}

jnxoptIfOTNPMIntervalMinFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimun bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the minimum Pre
         FEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECIntervalEntry  6}

jnxoptIfOTNPMIntervalMinFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimun bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the minimum Pre
         FEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECIntervalEntry  7}

jnxoptIfOTNPMIntervalMaxFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the maximum Pre
         FEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECIntervalEntry  8}

jnxoptIfOTNPMIntervalMaxFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the maximum Pre
         FEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECIntervalEntry  9}

jnxoptIfOTNPMIntervalAvgFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the average Pre
         FEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECIntervalEntry  10}

jnxoptIfOTNPMIntervalAvgFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the average Pre
         FEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECIntervalEntry  11}

jnxoptIfOTNPMFECIntervalTimeStamp  OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Time stamp of this interval."
    ::= { jnxoptIfOTNPMFECIntervalEntry 12 }

jnxoptIfOTNPMFECIntSuspectReason  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - interface disabled
          4 - clock shift detected
          5 - cleared by user
          6 - interval too short secs < 890
          7 - interval too long secs > 910
          8 - near end unavailable
          9 - far end unavailable
         10 - partial data
         11 - missing intervals due to restarts
        "
    ::= { jnxoptIfOTNPMFECIntervalEntry 13 }

--
-- FEC PM  Current Day day Table
--
jnxoptIfOTNPMFECCurrentDayTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMFECCurrentDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring FEC current day table."
    ::= { jnxoptIfOTNPMGroup 10 }

jnxoptIfOTNPMFECCurrentDayEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMFECCurrentDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance
         monitoring FEC current day table."
    INDEX  { ifIndex, jnxoptIfOTNPMFECCurrentDayType }
    ::= { jnxoptIfOTNPMFECCurrentDayTable 1 }

JnxoptIfOTNPMFECCurrentDayEntry ::=
    SEQUENCE {
        jnxoptIfOTNPMFECCurrentDayType                     JnxoptIfOTNType,
        jnxoptIfOTNPMFECCurrentDaySuspectedFlag            TruthValue,
        jnxoptIfOTNPMCurrentDayFECCorrectedErr             Counter64,
        jnxoptIfOTNPMCurrentDayFECUncorrectedWords         Counter64,
        jnxoptIfOTNPMCurrentDayMinFECBERMantissa           Unsigned32,
        jnxoptIfOTNPMCurrentDayMinFECBERExponent           Unsigned32,
        jnxoptIfOTNPMCurrentDayMaxFECBERMantissa           Unsigned32,
        jnxoptIfOTNPMCurrentDayMaxFECBERExponent           Unsigned32,
        jnxoptIfOTNPMCurrentDayAvgFECBERMantissa           Unsigned32,
        jnxoptIfOTNPMCurrentDayAvgFECBERExponent           Unsigned32,
        jnxoptIfOTNPMFECCurrentDayElapsedTime              Unsigned32,
        jnxoptIfOTNPMFECCurDaySuspectReason                Integer32
    }

jnxoptIfOTNPMFECCurrentDayType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  1}


jnxoptIfOTNPMFECCurrentDaySuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  2}

jnxoptIfOTNPMCurrentDayFECCorrectedErr   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bits corrected by the FEC are counted in the
         interval."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  3}

jnxoptIfOTNPMCurrentDayFECUncorrectedWords   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of words un-corrected by the FEC are counted over the
         Day."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  4}

jnxoptIfOTNPMCurrentDayMinFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimun bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the minimum
         PreFEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  5}

jnxoptIfOTNPMCurrentDayMinFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimun bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the minimum
         PreFEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  6}

jnxoptIfOTNPMCurrentDayMaxFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the maximum
         PreFEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  7}

jnxoptIfOTNPMCurrentDayMaxFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the maximum
         PreFEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  8}

jnxoptIfOTNPMCurrentDayAvgFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the average
         PreFEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  9}

jnxoptIfOTNPMCurrentDayAvgFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the average
         PreFEC BER in the current 24hour period."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  10}

jnxoptIfOTNPMFECCurrentDayElapsedTime    OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Time elapsed for current day."
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  11}

jnxoptIfOTNPMFECCurDaySuspectReason  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - clock shift detected
          4 - cleared by user
          5 - partial data
          6 - missing intervals due to restarts
          7 - one or more intervals are invaild
        "
    ::= { jnxoptIfOTNPMFECCurrentDayEntry  12}

--
-- FEC PM  Prev day Table
--
jnxoptIfOTNPMFECPrevDayTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF JnxoptIfOTNPMFECPrevDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A Performance monitoring FEC previous day table."
    ::= { jnxoptIfOTNPMGroup 11 }

jnxoptIfOTNPMFECPrevDayEntry OBJECT-TYPE
    SYNTAX      JnxoptIfOTNPMFECPrevDayEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A conceptual entry in the Near end or Far End performance
         monitoring FEC previous day table."
    INDEX  { ifIndex, jnxoptIfOTNPMFECPrevDayType }
    ::= { jnxoptIfOTNPMFECPrevDayTable 1 }

JnxoptIfOTNPMFECPrevDayEntry ::=
    SEQUENCE {
        jnxoptIfOTNPMFECPrevDayType                     JnxoptIfOTNType,
        jnxoptIfOTNPMFECPrevDaySuspectedFlag            TruthValue,
        jnxoptIfOTNPMPrevDayFECCorrectedErr             Counter64,
        jnxoptIfOTNPMPrevDayFECUncorrectedWords         Counter64,
        jnxoptIfOTNPMPrevDayMinFECBERMantissa           Unsigned32,
        jnxoptIfOTNPMPrevDayMinFECBERExponent           Unsigned32,
        jnxoptIfOTNPMPrevDayMaxFECBERMantissa           Unsigned32,
        jnxoptIfOTNPMPrevDayMaxFECBERExponent           Unsigned32,
        jnxoptIfOTNPMPrevDayAvgFECBERMantissa           Unsigned32,
        jnxoptIfOTNPMPrevDayAvgFECBERExponent           Unsigned32,
        jnxoptIfOTNPMFECPrevDayTimeStamp                DateAndTime,
        jnxoptIfOTNPMFECPrevDaySuspectReason            Integer32
    }

jnxoptIfOTNPMFECPrevDayType        OBJECT-TYPE
    SYNTAX  JnxoptIfOTNType
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This parameter indicates the parameters for the table are for the
         Near End or Far End performance data.
         1 - Near End
         2 - Far End "
    ::= { jnxoptIfOTNPMFECPrevDayEntry  1}


jnxoptIfOTNPMFECPrevDaySuspectedFlag   OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If true, the data in this entry may be unreliable."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  2}

jnxoptIfOTNPMPrevDayFECCorrectedErr   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bits corrected by the FEC are counted in the
         previous day."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  3}

jnxoptIfOTNPMPrevDayFECUncorrectedWords   OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of un-corrected words by the FEC are counted over the
         previous Day."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  4}

jnxoptIfOTNPMPrevDayMinFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the maximum Pre
         FEC BER in the previous 24hour period."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  5}

jnxoptIfOTNPMPrevDayMinFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The minimun bit error rate at receiving side before the FEC
         function counted over one second .. exponent. This is the maximum Pre
         FEC BER in the previous 24hour period."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  6}

jnxoptIfOTNPMPrevDayMaxFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the maximum Pre
         FEC BER in the previous 24hour period (mantissa)."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  7}

jnxoptIfOTNPMPrevDayMaxFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximun bit error rate at receiving side before the FEC
         function counted over one second .. exponent (eg -3).
         This is the maximum Pre FEC BER in the previous 24hour period."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  8}

jnxoptIfOTNPMPrevDayAvgFECBERMantissa   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average bit error rate at receiving side before the FEC
         function counted over one second .. mantissa. This is the average Pre
         FEC BER during the previous 24hour period (mantissa)."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  9}

jnxoptIfOTNPMPrevDayAvgFECBERExponent   OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The average bit error rate at receiving side before the FEC
         function counted over one second .. exponent (eg -3).
         This is the average Pre FEC BER during the previous 24hour period."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  10}

jnxoptIfOTNPMFECPrevDayTimeStamp OBJECT-TYPE
    SYNTAX  DateAndTime
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Time stamp for the Prev day."
    ::= { jnxoptIfOTNPMFECPrevDayEntry  11}

jnxoptIfOTNPMFECPrevDaySuspectReason  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If SuspectedFlag is true, the reson for the PM data being suspect.
          0 - not applicable
          1 - unknown
          2 - new object
          3 - clock shift detected
          4 - cleared by user
          5 - partial data
          6 - missing intervals due to restarts
          7 - one or more intervals are invaild
        "
    ::= { jnxoptIfOTNPMFECPrevDayEntry  12}

--
-- OTN Alarm Table
--
jnxoptIfOTNAlarmTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF JnxoptIfOTNAlarmEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of alarm entries."

    ::= { jnxoptIfOTNAlarm 1 }

jnxoptIfOTNAlarmEntry OBJECT-TYPE
    SYNTAX     JnxoptIfOTNAlarmEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A conceptual entry in the alarm table."
    INDEX { ifIndex }
    ::= { jnxoptIfOTNAlarmTable 1 }

JnxoptIfOTNAlarmEntry ::= SEQUENCE {
    jnxoptIfOTNAlarmLocation                 JnxoptIfOTNType,
    jnxoptIfOTNAlarmDirection                JnxoptIfOTNDirection,
    jnxoptIfOTNAlarmLayer                    JnxoptIfOTNLayer,
    jnxoptIfOTNAlarmTCMLevel                 Unsigned32,
    jnxoptIfOTNOChOTUkAlarmType              JnxoptIfOTNOChAlarms,
    jnxoptIfOTNAlarmSeverity                 JnxoptIfOTNAlarmSeverity,
    jnxoptIfOTNAlarmDate                     DateAndTime,
    jnxoptIfOTNODUkTcmAlarmType              JnxoptIfOTNODUkTcmAlarms
}

jnxoptIfOTNAlarmLocation OBJECT-TYPE
    SYNTAX      JnxoptIfOTNType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object identifies indicates if this entry was for
         Near end/Far end."
    ::= { jnxoptIfOTNAlarmEntry 1 }

jnxoptIfOTNAlarmDirection OBJECT-TYPE
    SYNTAX      JnxoptIfOTNDirection
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object identifies indicates if this entry was for
         for the Tx/Rx or both."
    ::= { jnxoptIfOTNAlarmEntry 2 }

jnxoptIfOTNAlarmLayer OBJECT-TYPE
    SYNTAX      JnxoptIfOTNLayer
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This specifies which sublayer this alarm is for."
    ::= { jnxoptIfOTNAlarmEntry 3 }

jnxoptIfOTNAlarmTCMLevel   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "TCM level 1-6 of the alarm. It will be 0 if alarm sublayer is
         OCh, OTUk or ODUk."
    ::= { jnxoptIfOTNAlarmEntry 4 }

jnxoptIfOTNOChOTUkAlarmType OBJECT-TYPE
    SYNTAX      JnxoptIfOTNOChAlarms
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This specifies the type of alarm of the sublayer
         'jnxoptIfOTNAlarmLayer' for OCh/OTUk ."
    ::= { jnxoptIfOTNAlarmEntry 5 }

jnxoptIfOTNAlarmSeverity  OBJECT-TYPE
    SYNTAX      JnxoptIfOTNAlarmSeverity
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object identifies the severity of the last alarm/alert
         that most recently was set or cleared."
    ::= { jnxoptIfOTNAlarmEntry 6 }

jnxoptIfOTNAlarmDate OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This specifies the date and time when this alarm occurred."
    ::= { jnxoptIfOTNAlarmEntry 7 }

jnxoptIfOTNODUkTcmAlarmType OBJECT-TYPE
    SYNTAX      JnxoptIfOTNODUkTcmAlarms
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This specifies the type of alarm of the sublayer
         'jnxoptIfOTNAlarmLayer' for ODUk/TCM ."
    ::= { jnxoptIfOTNAlarmEntry 8 }


 --
 -- OTN Notifications
 --

jnxoptIfOTNOChOTUkAlarmSet NOTIFICATION-TYPE
    OBJECTS { jnxoptIfOTNAlarmLocation,
              jnxoptIfOTNAlarmDirection,
              jnxoptIfOTNAlarmLayer,
              jnxoptIfOTNAlarmTCMLevel,
              jnxoptIfOTNOChOTUkAlarmType,
              jnxoptIfOTNAlarmSeverity,
              jnxoptIfOTNAlarmDate }
    STATUS  current
    DESCRIPTION
        "Notification of a recently set OTN alarm of Layer
         and Type."
    ::= { jnxoptIfOTNNotifications 1 }

jnxoptIfOTNOChOTUkAlarmClear NOTIFICATION-TYPE
    OBJECTS { jnxoptIfOTNAlarmLocation,
              jnxoptIfOTNAlarmDirection,
              jnxoptIfOTNAlarmLayer,
              jnxoptIfOTNAlarmTCMLevel,
              jnxoptIfOTNOChOTUkAlarmType,
              jnxoptIfOTNAlarmSeverity,
              jnxoptIfOTNAlarmDate }
    STATUS  current
    DESCRIPTION
        "Notification of a recently clear OTN alarm of Layer
         and Type."
    ::= { jnxoptIfOTNNotifications 2 }

jnxoptIfOTNODUkTcmAlarmSet NOTIFICATION-TYPE
    OBJECTS { jnxoptIfOTNAlarmLocation,
              jnxoptIfOTNAlarmDirection,
              jnxoptIfOTNAlarmLayer,
              jnxoptIfOTNAlarmTCMLevel,
              jnxoptIfOTNODUkTcmAlarmType,
              jnxoptIfOTNAlarmSeverity,
              jnxoptIfOTNAlarmDate }
    STATUS  current
    DESCRIPTION
        "Notification of a recently set OTN alarm of Layer
         and Type."
    ::= { jnxoptIfOTNNotifications 3 }

jnxoptIfOTNODUkTcmAlarmClear NOTIFICATION-TYPE
    OBJECTS { jnxoptIfOTNAlarmLocation,
              jnxoptIfOTNAlarmDirection,
              jnxoptIfOTNAlarmLayer,
              jnxoptIfOTNAlarmTCMLevel,
              jnxoptIfOTNODUkTcmAlarmType,
              jnxoptIfOTNAlarmSeverity,
              jnxoptIfOTNAlarmDate }
    STATUS  current
    DESCRIPTION
        "Notification of a recently clear OTN alarm of Layer
         and Type."
    ::= { jnxoptIfOTNNotifications 4 }


END