path: root/MIBS/huawei/HUAWEI-PWE3-MIB

-- ==================================================================
-- Copyright (C) 2017 by  HUAWEI TECHNOLOGIES. All rights reserved.
-- 
-- Description: HUAWEI PWE3 Management MIB
-- Reference:
-- Version: V2.13
-- History:
--              V1.0 PanJun, 2006-05-10, publish
-- ==================================================================

    HUAWEI-PWE3-MIB DEFINITIONS ::= BEGIN
 
        IMPORTS
            hwDatacomm            
                FROM HUAWEI-MIB            
            HWL2VpnVcEncapsType, HWEnableValue, HWL2VpnStateChangeReason, hwL2vpnTnlType, hwL2vpnTunnelIndex
                FROM HUAWEI-VPLS-EXT-MIB            
            InterfaceIndexOrZero, ifName            
                FROM IF-MIB            
            InetAddressType            
                FROM INET-ADDRESS-MIB            
            OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP            
                FROM SNMPv2-CONF            
            sysUpTime            
                FROM SNMPv2-MIB            
            IpAddress, Integer32, Unsigned32, Counter64, BITS, 
            OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE            
                FROM SNMPv2-SMI            
            DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION            
                FROM SNMPv2-TC
            EnabledStatus
                FROM P-BRIDGE-MIB
            hwL2vpnAcIfIndex,hwL2vpnAcIfPhyType,hwL2vpnAcIfLinkType,hwL2vpnAcIfEncap,hwL2vpnAcIfMinEncapNum,hwL2vpnAcIfMaxEncapNum,hwL2vpnAcIfEncapStep,hwL2vpnAcIfMinJitterBuffer,
           hwL2vpnAcIfMaxJitterBuffer,hwL2vpnAcIfJitterBufferStep,hwL2vpnAcIfCfgTtpHeader,hwL2vpnAcIfMinIdleCode,hwL2vpnAcIfMaxIdleCode
               FROM HUAWEI-L2VPN-MIB;
    
    
        hwL2VpnPwe3 MODULE-IDENTITY 
            LAST-UPDATED  "201708171724Z"           --Aug 17, 2017 at 17:24 GMT 
            ORGANIZATION 
                "Huawei Technologies Co.,Ltd."
            CONTACT-INFO 
                "Huawei Industrial Base
                  Bantian, Longgang
                   Shenzhen 518129
                   People's Republic of China
                   Website: http://www.huawei.com
                   Email: support@huawei.com
                 "
            DESCRIPTION 
                "The HUAWEI-PWE3-MIB contains objects to
                manage PWE3."

           REVISION "201708171724Z"           --Aug 17, 2017 at 17:24 GMT 
             DESCRIPTION               
             "Modify the description of hwSvcExtPWType" 


           REVISION "201601121800Z"           --Jan 12, 2016 at 18:00 GMT 
             DESCRIPTION               
             "Modify the description of hwSvcExtPWType" 

           REVISION "201512281700Z"           --Dec 28, 2015 at 17:00 GMT 
             DESCRIPTION               
             "Add OBJECT(hwSvcExtCir, hwSvcExtPir,hwSvcExtQosProfile) to SVC MIB Extend Table(hwSvcExtTable)" 

           REVISION "201511281600Z"           --Nov 28, 2015 at 10:55 GMT 
             DESCRIPTION               
             "Support query the secondary static VCs" 
         
           REVISION "201507181600Z"           --July 18, 2015 at 13:58 GMT 
             DESCRIPTION               
             "Add ifName to hwRemoteApPwParaMisMatch "

             REVISION "201507141600Z"           --July 07, 2015 at 16:00 GMT 
             DESCRIPTION               
             "Add PWE3 MIB Trap(hwVpwsPwRedundancyDegraded)." 

             REVISION "201504071600Z"           --Apr 07, 2015 at 16:00 GMT 
             DESCRIPTION               
             "Modify the description of hwSvcActive." 

             REVISION "201410271600Z"           --Oct 27, 2014 at 16:00 GMT 
             DESCRIPTION               
             "Add PWE3 MIB Trap(hwVpwsPwRedundancyDegraded)." 
			  
             REVISION "201410271600Z"           --Oct 27, 2014 at 16:00 GMT 
             DESCRIPTION               
             "Add PWE3 MIB Trap(hwVpwsPwRedundancyDegradedClear)." 

             REVISION "201410081600Z"           --Oct 08, 2014 at 16:00 GMT 
             DESCRIPTION               
             "Modify the description of hwSvcForBfdIndex,hwSvcDelayTime, hwSvcReroutePolicy,
              hwSvcRerouteReason, hwSvcLastRerouteTime." 

             REVISION "201402111600Z"           -- Feb 11, 2014 at 16:00 GMT 
             DESCRIPTION               
             "The max length of hwPWVcQosProfile,hwPWVcSwitchQosProfile, hwPwVcSwitchBackupVcQosProfile,
              hwSvcQosProfile, hwPWTemplateQosProfile changed from 31 to 63." 

             REVISION "201308291100Z"           -- Aug 29, 2013 at 11:00 GMT 
             DESCRIPTION               
             " Add PWE3 MIB Trap(hwPWVcStatusChange)." 

             REVISION "201307131100Z"           -- July 13, 2013 at 11:00 GMT 
             DESCRIPTION  
             "Add OBJECT(hwL2vpnTnlType, hwL2vpnTunnelIndex) to SVC MIB Trap(hwSvcDown);  
             Add OBJECT(hwL2vpnTnlType, hwL2vpnTunnelIndex) to PWE3 MIB Trap(hwPWVcDown)." 

            REVISION "201306181100Z"           -- June 18, 2013 at 11:00 GMT
            DESCRIPTION 
                "Add OBJECT(hwSvcActive) to SVC MIB Trap(hwSvcDown,hwSvcUp); 
                 Add OBJECT(hwPWVcActive) to PWE3 MIB Trap(hwPWVcDown,hwPWVcUp,hwPWVcBackup)."

            ::= { hwL2Vpn 4 }
            
--
-- Textual conventions
--

        HWLdpPwStateChangeReason ::= TEXTUAL-CONVENTION
            STATUS current
            DESCRIPTION 
                "The type indicates the reason of LDP PW VC's status change:
                LDP session down (1) 
                AC interface down (2) 
                PSN tunnel state down (3) 
                Mapping message not received (4)
                PW interface parameter not match (5)
                Notification not forwarding (6)                
                "
            SYNTAX INTEGER
                {
                ldpSessionDown(1),
                interfaceDown(2),
                tunnelDown(3),
                receivedNoMapping(4),
                paraUnMatched(5),
                notifiNotForward(6)
                }    

       HWL2VpnVcType ::= TEXTUAL-CONVENTION
            STATUS current
            DESCRIPTION 
               "The type indicates the type of the LDP PW VC."
            SYNTAX INTEGER
                {
                main(1),
                secondary(2),
                bypass(3)
                }
    
--
-- Node definitions
--
        hwL2Vpn OBJECT IDENTIFIER ::= { hwDatacomm 119 }

        
--          
-- The PWE3 Attribute Group
-- 
        hwPwe3MIBObjects OBJECT IDENTIFIER ::= { hwL2VpnPwe3 1 }

        
--          
        hwPwe3Objects OBJECT IDENTIFIER ::= { hwPwe3MIBObjects 1 }

        
--          
-- The PWE3's VC Table
-- 
        hwPWVcTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWVcEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table is the VC configuration table. Users
                can create or delete a VC by it."
            ::= { hwPwe3Objects 1 }

        
        hwPWVcEntry OBJECT-TYPE
            SYNTAX HWPWVcEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of a VC entry."
            INDEX { hwPWVcID, hwPWVcType }
            ::= { hwPWVcTable 1 }

        
        HWPWVcEntry ::=
            SEQUENCE { 
                hwPWVcID
                    Unsigned32,
                hwPWVcType
                    HWL2VpnVcEncapsType,
                hwPWVcPeerAddrType
                    InetAddressType,
                hwPWVcPeerAddr
                    IpAddress,
                hwPWVcStatus
                    INTEGER,
                hwPWVcInboundLabel
                    Unsigned32,
                hwPWVcOutboundLabel
                    Unsigned32,
                hwPWVcSwitchSign
                    INTEGER,
                hwPWVcSwitchID
                    Unsigned32,
                hwPWVcSwitchPeerAddrType
                    InetAddressType,
                hwPWVcSwitchPeerAddr
                    IpAddress,
                hwPWVcSwitchInboundLabel
                    Unsigned32,
                hwPWVcSwitchOutboundLabel
                    Unsigned32,
                hwPWVcGroupID
                    Unsigned32,
                hwPWVcIfIndex
                    InterfaceIndexOrZero,
                hwPWVcAcStatus
                    INTEGER,
                hwPWVcACOAMStatus
                    INTEGER,
                hwPWVcMtu
                    Integer32,
                hwPWVcCtrlWord
                    HWEnableValue,
                hwPWVcVCCV
                    BITS,
                hwPWVcBandWidth
                    Unsigned32,
                hwPWVcMaxAtmCells
                    Unsigned32,
                hwPWVcTnlPolicyName
                    OCTET STRING,
                hwPWVcQoSBehaviorIndex
                    Unsigned32,
                hwPWVcExplicitPathName
                    DisplayString,
                hwPWVcTemplateName
                    OCTET STRING,
                hwPWVcSecondary
                    TruthValue,
                hwPWVcUpTime
                    Unsigned32,
                hwPWOAMSync
                    TruthValue,
                hwPWVCForBfdIndex
                    Unsigned32,
                hwPWVcDelayTime
                    Unsigned32,
                hwPWVcReroutePolicy
                    INTEGER,
                hwPWVcResumeTime
                    Unsigned32,
                hwPWVcRerouteReason
                    HWL2VpnStateChangeReason,
                hwPWVcLastRerouteTime
                    Unsigned32,
                hwPWVcManualSetFault
                    TruthValue,
                hwPWVcActive
                    TruthValue,
                hwPWVcVrIfIndex
                    InterfaceIndexOrZero,
                hwPWVcVrID
                    Unsigned32,
                hwPWBFDDetectMultiplier
                    Unsigned32,
                hwPWBFDMinReceiveInterval
                    Unsigned32,
                hwPWBFDMinTransmitInterval
                    Unsigned32,
                hwPWDynamicBFDDetect
                    TruthValue,
                hwPWBFDRemoteVcID
                    Unsigned32,
                hwPWEthOamType
                    INTEGER,
                hwPWCfmMaIndex
                    Unsigned32,
                hwPWVcUpStartTime
                    DisplayString,
                hwPWVcUpSumTime
                    Unsigned32,
                hwPWVcIfName
                    DisplayString,
                hwPWVcRowStatus
                    RowStatus,
                hwPWVcAtmPackOvertime
                    Unsigned32,
                hwPWVcPwJitterBufferDepth
                    Unsigned32,
                hwPWVcPwTdmEncapsulationNum
                    Unsigned32,
                hwPWVcPwIdleCode
                    Unsigned32,
                hwPWVcPwRtpHeader
                    Unsigned32, 
                hwPWVcSwitchTnlPolicyName
                    OCTET STRING,
                hwPWVcCfmMdIndex
                    Unsigned32,
                hwPWVcCfmMaName
                    OCTET STRING,
                hwPWVcCfmMdName
                    OCTET STRING,
                hwPWVcRawOrTagged
                    INTEGER,
                hwPWVcInterworkingType
                    INTEGER,
                hwPWVcCir
                    Unsigned32,
                hwPWVcPir
                    Unsigned32,
                hwPWVcQosProfile
                    DisplayString,
                hwPWVcSwitchCir
                    Unsigned32,
                hwPWVcSwitchPir
                    Unsigned32,
                hwPWVcSwitchQosProfile
                    DisplayString,
                hwPWVcTrigger
                    TruthValue,
                hwPWVcEnableACOAM
                    EnabledStatus,
                hwPWVcSwitchVrIfIndex
                    InterfaceIndexOrZero,
                hwPWVcSwitchVrID
                    Unsigned32,
                hwPWVcQosParaFromPWT
                    INTEGER,
                hwPWVcBfdParaFromPWT
                    INTEGER,
                hwPwVcNegotiateMode
                    INTEGER,
                hwPwVcIsBypass
                    TruthValue,
                hwPwVcIsAdmin
                    TruthValue,
                hwPwVcAdminPwIfIndex
                    InterfaceIndexOrZero,
                hwPwVcAdminPwLinkStatus
                    INTEGER,
                hwPwVcSwitchAdminPwIfIndex
                    InterfaceIndexOrZero,
                hwPwVcSwitchAdminPwLinkStatus
                    INTEGER,
                hwPwVcSwitchBackupAdminPwIfIndex
                    InterfaceIndexOrZero,
                hwPwVcSwitchBackupAdminPwLinkStatus
                    INTEGER,
                hwPwVcSwitchBackupVcId
                    Unsigned32,
                hwPwVcSwitchBackupVcPeerAddrType
                    InetAddressType,
                hwPwVcSwitchBackupVcPeerAddr
                    IpAddress,
                hwPwVcSwitchBackupVcReceiveLabel
                    Unsigned32,
                hwPwVcSwitchBackupVcSendLabel
                    Unsigned32,
                hwPwVcSwitchBackupVcTnlPolicyName
                    OCTET STRING,
                hwPwVcSwitchBackupVcCir
                    Unsigned32,
                hwPwVcSwitchBackupVcPir
                    Unsigned32,
                hwPwVcSwitchBackupVcQosProfile
                    DisplayString,
                hwPwVcSlaveMasterMode
                    INTEGER,
                hwPwVcSwitchVcSlaveMasterMode
                    INTEGER,
                hwPwVcSwitchBackupVcSlaveMasterMode
                    INTEGER,
                hwPwVcSwitchVcActive
                    TruthValue,
                hwPwVcSwitchBackupVcActive
                    TruthValue,
                hwPwVcSwitchCwTrans
                    TruthValue,
                hwPwVcSwitchVcServiceName
                    OCTET STRING,
                hwPwVcSwitchBackupVcServiceName
                    OCTET STRING  
             }
             
        hwPWVcID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual 
                Circuit FEC Element'."
            ::= { hwPWVcEntry 1 }
        
        
        hwPWVcType OBJECT-TYPE
            SYNTAX HWL2VpnVcEncapsType
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "The type of the Virtual Circuit.This value indicate the service to be carried over 
                this PW."
            ::= { hwPWVcEntry 2 }
        
        
        hwPWVcPeerAddrType OBJECT-TYPE
            SYNTAX InetAddressType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Denotes the address type of the peer node. It should be  
                set to 'unknown' if PE/PW maintenance protocol is not used 
                and the address is unknown.
                Currently, support 'ipv4' only."
            DEFVAL { ipv4 }
            ::= { hwPWVcEntry 3 }
        
        
        hwPWVcPeerAddr OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object contain the value of the peer node address 
                of the PW/PE maintenance protocol entity. This object  
                SHOULD contain a value of all zeroes if not applicable  
                (hwPWVcPeerAddrType is 'unknown')."
            ::= { hwPWVcEntry 4 }
        
        
        hwPWVcStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3),
                backup(4)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the status of the PW in the local node.
                Currently, can't support 'plugout'."
            ::= { hwPWVcEntry 5 }
        
        
        hwPWVcInboundLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the incoming label value of a PW."
            ::= { hwPWVcEntry 6 }
        
        
        hwPWVcOutboundLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the outgoing label value of a PW."
            ::= { hwPWVcEntry 7 }
        
        
        hwPWVcSwitchSign OBJECT-TYPE
            SYNTAX INTEGER
                {
                staticTostatic(1),
                ldpTostatic(2),
                ldpToldp(3),
                upe(4)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the type of a switch PW."
            ::= { hwPWVcEntry 8 }
        
        
        hwPWVcSwitchID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Used in the outgoing PW ID field within the 'Virtual 
                Circuit FEC Element' of the switch PW."
            ::= { hwPWVcEntry 9 }
        
        
        hwPWVcSwitchPeerAddrType OBJECT-TYPE
            SYNTAX InetAddressType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Denotes the address type of the peer node of the switch PW.
                It should be set to 'unknown' if PE/PW maintenance protocol
                is not used and the address is unknown.
                Currently, support 'ipv4' only."
            DEFVAL { ipv4 }
            ::= { hwPWVcEntry 10 }
        
        
        hwPWVcSwitchPeerAddr OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object contain the value of the peer node address of the
                switch PW of the PW/PE maintenance protocol entity. This object  
                SHOULD contain a value of all zeroes if not applicable  
                (hwPWVcSwitchPeerAddrType is 'unknown')."
            ::= { hwPWVcEntry 11 }
        
        
        hwPWVcSwitchInboundLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the incoming label value of a switch PW."
            ::= { hwPWVcEntry 12 }
        
        
        hwPWVcSwitchOutboundLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the outgoing label value of a switch PW."
            ::= { hwPWVcEntry 13 }
        
        
        hwPWVcGroupID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Used in the Group ID field sent to the peer PWES  
                within the maintenance protocol used for PW setup. 
                Applicable if pwVcOwner equal 'pwIdFecSignaling' or  
                'l2tpControlProtocol', should be set to zero otherwise.
                Currently, this value always be zero."
            ::= { hwPWVcEntry 14 }

        
        hwPWVcIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Index of the interface (or the virtual interface) 
                associated with the PW."
            ::= { hwPWVcEntry 15 }

        
        hwPWVcAcStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3),
                notify(4),
                notifyDown(5),
                downNotify(6)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Local AC status.
                Currently, can't support 'plugout'."
            ::= { hwPWVcEntry 16 }

        
        hwPWVcACOAMStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the AC's protocol is operational or not."
            ::= { hwPWVcEntry 17 }

        
        hwPWVcMtu OBJECT-TYPE
            SYNTAX Integer32 (0 | 46..9600)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "If not equal zero, the optional Mtu object in the  
                signaling protocol will be sent with this value,  
                representing the locally supported MTU size over the  
                interface (or the virtual interface) associated with the  
                PW."
            ::= { hwPWVcEntry 18 }

        
        hwPWVcCtrlWord OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "If signaling is used for PW establishment, this object  
                indicates the status of the control word negotiation,  
                and in both signaling or manual configuration indicates  
                if CW is to be present or not for this PW."
            ::= { hwPWVcEntry 19 }

        
        hwPWVcVCCV OBJECT-TYPE
            SYNTAX BITS
                {
                ccCw(0),
                ccAlert(1),
                ccLabel(2),
                cvIcmpping(3),
                cvLspping(4),
                cvBfd(5),
                ccTtl(6)
                }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the VCCV value of a PW."
            ::= { hwPWVcEntry 20 }

        
        hwPWVcBandWidth OBJECT-TYPE
            SYNTAX Unsigned32 (0..32000000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the bandwidth. '0' is the default value."
            ::= { hwPWVcEntry 21 }

        
        hwPWVcMaxAtmCells OBJECT-TYPE
            SYNTAX Unsigned32 (0..28)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the max cell supported when vc type is atm."
            ::= { hwPWVcEntry 22 }

        
        hwPWVcTnlPolicyName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..39))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the tunnel policy name used."
            ::= { hwPWVcEntry 23 }

        
        hwPWVcQoSBehaviorIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the traffic behavior Index when QOS is implemented.
                Currently,can't support.Return the default value is '0'."
            ::= { hwPWVcEntry 24 }

        
        hwPWVcExplicitPathName OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..31))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the explicit path name set by the operator.Currently, can't support."
            ::= { hwPWVcEntry 25 }

        
        hwPWVcTemplateName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..19))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the PW template index referenced."
            ::= { hwPWVcEntry 26 }

        
        hwPWVcSecondary OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates whether or not the secondary PW is used."
            ::= { hwPWVcEntry 27 }

        
        hwPWVcUpTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the duration when the PW keeps Up for 
                the last time, in seconds."
            ::= { hwPWVcEntry 28 }

        
        hwPWOAMSync OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates whether OAM mapping is enabled."
            ::= { hwPWVcEntry 29 }

        
        hwPWVCForBfdIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The index of PW for BFD."
            ::= { hwPWVcEntry 30 }

        
        hwPWVcDelayTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The reroute delay time."
            ::= { hwPWVcEntry 31 }

        
        hwPWVcReroutePolicy OBJECT-TYPE
            SYNTAX INTEGER
                {
                delay(1),
                immediately(2),
                never(3),
                none(4),
                err(5),
                invalid(6),                
                immediatelySwitch(7)
                }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Reroute policy."
            ::= { hwPWVcEntry 32 }

        
        hwPWVcResumeTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The reroute resume time."
            ::= { hwPWVcEntry 33 }

        
        hwPWVcRerouteReason OBJECT-TYPE
            SYNTAX HWL2VpnStateChangeReason
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Last reroute reason."
            ::= { hwPWVcEntry 34 }

        
        hwPWVcLastRerouteTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Last reroute time."
            ::= { hwPWVcEntry 35 }

        
        hwPWVcManualSetFault OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates that faults on the primary or secondary PW are manually simulated."
            ::= { hwPWVcEntry 36 }

        
        hwPWVcActive OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the current vc is active or not."
            ::= { hwPWVcEntry 37 }

        
        hwPWVcVrIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the index of the AC interface bound to a management VRRP backup group."
            ::= { hwPWVcEntry 38 }

        
        hwPWVcVrID OBJECT-TYPE
            SYNTAX Unsigned32 (0..255)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the ID of a management VRRP backup group."
            ::= { hwPWVcEntry 39 }

        
        hwPWBFDDetectMultiplier OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 3..50)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The multiple of detection time."
            ::= { hwPWVcEntry 40 }

        
        hwPWBFDMinReceiveInterval OBJECT-TYPE
        SYNTAX Unsigned32 (0 | 3..1000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the minimum interval at which dynamic BFD packets are received."
            ::= { hwPWVcEntry 41 }

        
        hwPWBFDMinTransmitInterval OBJECT-TYPE
        SYNTAX Unsigned32 (0 | 3..1000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the minimum interval at which dynamic BFD packets are sent."
            ::= { hwPWVcEntry 42 }

        
        hwPWDynamicBFDDetect OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This value indicates the capacitability to support dynamic BFD detect."
            ::= { hwPWVcEntry 43 }

        
        hwPWBFDRemoteVcID OBJECT-TYPE
            SYNTAX Unsigned32 (0..4294967295)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the VC ID of the peer PW."
            ::= { hwPWVcEntry 44 }      
            
        hwPWEthOamType  OBJECT-TYPE
            SYNTAX INTEGER 
                {
                ethOam1ag(1),
                ethOam3ah(2),
                noEthOamCfg(3)
                }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This value indicates the type of ETH OAM."
            ::= { hwPWVcEntry 45 }   
            
        hwPWCfmMaIndex  OBJECT-TYPE
            SYNTAX Unsigned32 (0..4095 | 4294967295)
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This value indicates the current CFM MA index."
            ::= { hwPWVcEntry 46 }
            
        hwPWVcUpStartTime  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Specifies the time this PW status was Up(1)."
            ::= { hwPWVcEntry 47 }
            
        hwPWVcUpSumTime  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the accumulated time when the VC is Up, 
                in seconds."
            ::= { hwPWVcEntry 48 }
            
        hwPWVcIfName  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Name of the interface (or the virtual interface) 
                associated with the PW."
            ::= { hwPWVcEntry 49 }
            
        hwPWVcRowStatus OBJECT-TYPE
            SYNTAX RowStatus
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "RowStatus for this Table.
                Restriction:
                  The row must be created by 'createAndGo' handle only.
                  Handle 'createAndWait' is forbidden.
                  Not support modifying configuration."
            ::= { hwPWVcEntry 51 }
                        
        hwPWVcAtmPackOvertime OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 100..50000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the ATM cell encapsulation period."
            ::= { hwPWVcEntry 52 }
              
        hwPWVcPwJitterBufferDepth OBJECT-TYPE
            SYNTAX Unsigned32 (0..64)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the jitter buffer depth for TDMoPSN."
            ::= { hwPWVcEntry 53 }   
                    
        hwPWVcPwTdmEncapsulationNum OBJECT-TYPE
            SYNTAX Unsigned32 (0..40)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet."
            ::= { hwPWVcEntry 54 }
            
        hwPWVcPwIdleCode OBJECT-TYPE
            SYNTAX Unsigned32 (0..255 | 65535)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The value of this object identifies the filling idle code used when a jitter buffer underflow occurs."
            ::= { hwPWVcEntry 55 }
              
        hwPWVcPwRtpHeader OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the RTP header carried in a transparently transmitted TDM frame."
            ::= { hwPWVcEntry 56 }
            
        hwPWVcSwitchTnlPolicyName  OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..39))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated."
            ::= { hwPWVcEntry 57 }
        
        hwPWVcCfmMdIndex  OBJECT-TYPE
            SYNTAX Unsigned32 (0..4095 | 4294967295)
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This value indicates the current CFM MD index."
            ::= { hwPWVcEntry 58 }
            
        hwPWVcCfmMaName  OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..43))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This value indicates the current CFM MA name used."
            ::= { hwPWVcEntry 59 }
            
        hwPWVcCfmMdName  OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..43))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This value indicates the current CFM MD name used."
            ::= { hwPWVcEntry 60 }
            
        hwPWVcRawOrTagged OBJECT-TYPE
            SYNTAX INTEGER
            {
            raw(1),
            tagged(2),
            rawTagNotConfiged(3)
            }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Specifies whether the raw or tagged is configured."
            ::= { hwPWVcEntry 61 }
            
        hwPWVcInterworkingType OBJECT-TYPE
            SYNTAX INTEGER
            {
            ipInterWorking(1),
            ipLayer2(2),
            ipUnknown(3)
            }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Specifies the interworking type of the VC entry."
            ::= { hwPWVcEntry 62 }
        
        hwPWVcCir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the committed information rate, based on the VC entry."
            ::= { hwPWVcEntry 63 }
                        
        hwPWVcPir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the peak information rate, based on the VC entry."
            ::= { hwPWVcEntry 64 }
                        
        hwPWVcQosProfile  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies the QoS profile's name, based on the VC entry."
            ::= { hwPWVcEntry 65 } 
            
        hwPWVcSwitchCir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the committed information rate, based on the switch VC entry."
            ::= { hwPWVcEntry 66 }
            
        hwPWVcSwitchPir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the peak information rate, based on the switch VC entry."
            ::= { hwPWVcEntry 67 }
             
        hwPWVcSwitchQosProfile  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies the QoS profile's name, based on the switch VC entry."
            ::= { hwPWVcEntry 68 }
            
        hwPWVcTrigger  OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies whether the PW remote interface shutdown or not."
            ::= { hwPWVcEntry 69 }
            
        hwPWVcEnableACOAM  OBJECT-TYPE
            SYNTAX EnabledStatus
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies whether ACOAM detection and notification are all enabled or not."
            ::= { hwPWVcEntry 70 }
            
        hwPWVcSwitchVrIfIndex  OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Denotes the VRRP interface the switch PW binding to."
            ::= { hwPWVcEntry 71 }
            
        hwPWVcSwitchVrID  OBJECT-TYPE
            SYNTAX Unsigned32 (0..255)
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Denotes the VrID the switch PW binding to."
            ::= { hwPWVcEntry 72 } 
            
        hwPWVcQosParaFromPWT  OBJECT-TYPE
            SYNTAX INTEGER
            {
            cliOrMib(1),
            pwTemplate(2),
            unknown(3)
            }
            MAX-ACCESS read-only
            STATUS current
                DESCRIPTION
                    "This object indicates the configuration of the Qos parameters managed through command line or PW template."
            ::= { hwPWVcEntry 73 }
            
         hwPWVcBfdParaFromPWT  OBJECT-TYPE
            SYNTAX INTEGER
            {
            cliOrMib(1),
            pwTemplate(2),
            unknown(3)
            }
            MAX-ACCESS read-only
            STATUS current
                DESCRIPTION
                    "This object indicates the configuration of the Bfd parameters managed through command line or PW template."
            ::= { hwPWVcEntry 74 }
            
         hwPwVcNegotiateMode  OBJECT-TYPE
            SYNTAX INTEGER
            {
            slaveOrMaster(1),
            independent(2),
            unknown(3),
            frr(4)
            }
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "This object indicates the negotiation mode of the PW on the local node."
            ::= { hwPWVcEntry 75 }
            
         hwPwVcIsBypass  OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "This object indicates whether the PW is the bypass PW."
            ::= { hwPWVcEntry 76 }
            
         hwPwVcIsAdmin  OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "This object indicates whether the PW is the administrator PW."
            ::= { hwPWVcEntry 77 }
            
        hwPwVcAdminPwIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
            "This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW."
            ::= { hwPWVcEntry 78 }
            
        hwPwVcAdminPwLinkStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                unknown(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the status of the administrator PW after it is being tracked by the service PW."
            ::= { hwPWVcEntry 79 }
            
        hwPwVcSwitchAdminPwIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW."
            ::= { hwPWVcEntry 80 }
            
        hwPwVcSwitchAdminPwLinkStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                unknown(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the status of the administrator PW after it is being tracked by the switch PW."
            ::= { hwPWVcEntry 81 }
            
        hwPwVcSwitchBackupAdminPwIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW."
            ::= { hwPWVcEntry 82 }
            
        hwPwVcSwitchBackupAdminPwLinkStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                unknown(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the status of the administrator PW after it is being tracked by the switch backup PW."
            ::= { hwPWVcEntry 83 }
            
        hwPwVcSwitchBackupVcId OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the VC ID of the switch backup PW."
            ::= { hwPWVcEntry 84 }
        
        
        hwPwVcSwitchBackupVcPeerAddrType OBJECT-TYPE
            SYNTAX InetAddressType
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates type of the IP address of the peer on the switch backup PW.
                 Currently, only IPv4 addresss are supported."
            ::= { hwPWVcEntry 85 }
        
        
        hwPwVcSwitchBackupVcPeerAddr OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the IP address of the peer on the switch backup PW."
            ::= { hwPWVcEntry 86 }
        
        
        hwPwVcSwitchBackupVcReceiveLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the inbound label of the switch backup VC.
                 For a static VC, the value of the inbound label ranges from 16 to 1023.
                 For a dynamic VC, the inbound label is automatically generated by the system."
            ::= { hwPWVcEntry 87 }
        
        
        hwPwVcSwitchBackupVcSendLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the outbound label of the switch backup VC. 
                 For a static VC, the value of the outbound label ranges from 0 to 1048575.
                 For a dynamic VC, the outbound label is automatically generated by the system."
            ::= { hwPWVcEntry 88 }
            
        hwPwVcSwitchBackupVcTnlPolicyName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..19))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the name of the tunnel policy of the switch backup VC."
            ::= { hwPWVcEntry 89 }
            
        hwPwVcSwitchBackupVcCir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the CIR of the switch backup VC."
            ::= { hwPWVcEntry 90 }
            
        hwPwVcSwitchBackupVcPir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the PIR of the switch backup VC."
            ::= { hwPWVcEntry 91 }
             
        hwPwVcSwitchBackupVcQosProfile  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "This object indicates the name of the QoS profile of the switch backup VC."
            ::= { hwPWVcEntry 92 }
            
         hwPwVcSlaveMasterMode  OBJECT-TYPE
            SYNTAX INTEGER
            {
            slave(1),
            master(2),
            unknown(3),
            bypass(4)
            }
            MAX-ACCESS read-only
            STATUS current
                DESCRIPTION
                    "This object indicates whether the status of the VC is master or slave."
            ::= { hwPWVcEntry 93 }
            
         hwPwVcSwitchVcSlaveMasterMode  OBJECT-TYPE
            SYNTAX INTEGER
            {
            slave(1),
            master(2),
            unknown(3)
            }
            MAX-ACCESS read-only
            STATUS current
                DESCRIPTION
                    "This object indicates whether the status of the switch VC is master or slave."
            ::= { hwPWVcEntry 94 }
            
         hwPwVcSwitchBackupVcSlaveMasterMode  OBJECT-TYPE
            SYNTAX INTEGER
            {
            slave(1),
            master(2),
            unknown(3)
            }
            MAX-ACCESS read-only
            STATUS current
                DESCRIPTION
                    "This object indicates whether the status of the switch backup VC is master or slave."
            ::= { hwPWVcEntry 95 }
            
          hwPwVcSwitchVcActive OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates whether the status of the switch VC is active or not."
            ::= { hwPWVcEntry 96 }
            
          hwPwVcSwitchBackupVcActive OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates whether the status of the switch backup VC is active or not."
            ::= { hwPWVcEntry 97 }
            
            hwPwVcSwitchCwTrans OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "This object indicates whether the SPE support Control Word Transparent or not,default is false."
            ::= { hwPWVcEntry 98 }
                                
            hwPwVcSwitchVcServiceName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..100))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the service name of the switch VC."
            ::= { hwPWVcEntry 99 }
                                    
            hwPwVcSwitchBackupVcServiceName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..100))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the service name of the switch backup VC."
            ::= { hwPWVcEntry 100 }
                                    
                                    
--          
-- The PWE3's VC Tunnel Table
-- 
        hwPWVcTnlTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWVcTnlEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table is used to search the tunnel index of a VC."
            ::= { hwPwe3Objects 2 }

        
        hwPWVcTnlEntry OBJECT-TYPE
            SYNTAX HWPWVcTnlEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of a VC tunnel entry."
            INDEX { hwPWVcID, hwPWVcType, hwPWVcTnlIndex }
            ::= { hwPWVcTnlTable 1 }

        
        HWPWVcTnlEntry ::=
            SEQUENCE { 
                hwPWVcTnlIndex
                    Unsigned32,
                hwPWVcTnlType
                    INTEGER,
                hwPWTnlForBfdIndex
                    Unsigned32
             }

        hwPWVcTnlIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This object indicates the tunnel index of the VC."
            ::= { hwPWVcTnlEntry 1 }

        
        hwPWVcTnlType OBJECT-TYPE
            SYNTAX INTEGER
                {
                lsp(1),
                gre(2),
                ipsec(3),
                crLsp(4)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the tunnel type."
            ::= { hwPWVcTnlEntry 2 }

        
        hwPWTnlForBfdIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the index of LSP for BFD."
            ::= { hwPWVcTnlEntry 3 }

        
--          
-- The PWE3's VC Statistics Table
-- 
        hwPWVcStatisticsTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWVcStatisticsEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table contains the Pwe3's VC packets statistics."
            ::= { hwPwe3Objects 3 }

        
        hwPWVcStatisticsEntry OBJECT-TYPE
            SYNTAX HWPWVcStatisticsEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of the Pwe3's VC packets
                statistics."
            INDEX { hwPWVcID, hwPWVcType }
            ::= { hwPWVcStatisticsTable 1 }

        
        HWPWVcStatisticsEntry ::=
            SEQUENCE { 
                hwPWVcStatisticsRcvPkts
                    Counter64,
                hwPWVcStatisticsRcvBytes
                    Counter64,
                hwPWVcStatisticsSndPkts
                    Counter64,
                hwPWVcStatisticsSndBytes
                    Counter64
             }

        hwPWVcStatisticsRcvPkts OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of packets received on this VC."
            ::= { hwPWVcStatisticsEntry 1 }

        
        hwPWVcStatisticsRcvBytes OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of bytes received on this VC."
            ::= { hwPWVcStatisticsEntry 2 }

        
        hwPWVcStatisticsSndPkts OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of packets sent on this VC."
            ::= { hwPWVcStatisticsEntry 3 }

        
        hwPWVcStatisticsSndBytes OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of bytes sent on the VC."
            ::= { hwPWVcStatisticsEntry 4 }

        
--          
-- The PWE3's Remote VC Table
-- 
        hwPWRemoteVcTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWRemoteVcEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table provides remote PW information for  
                each local PW."
            ::= { hwPwe3Objects 4 }

        
        hwPWRemoteVcEntry OBJECT-TYPE
            SYNTAX HWPWRemoteVcEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "An entry in this table is created by the agent for 
                every PW."
            INDEX { hwPWVcID, hwPWVcType }
            ::= { hwPWRemoteVcTable 1 }

        
        HWPWRemoteVcEntry ::=
            SEQUENCE { 
                hwPWRemoteVcID
                    Unsigned32,
                hwPWRemoteVcType
                    HWL2VpnVcEncapsType,
                hwPWRemoteVcStatus
                    INTEGER,
                hwPWRemoteVcGroupID
                    Unsigned32,
                hwPWRemoteVcMtu
                    Unsigned32,
                hwPWRemoteVcCtrlword
                    HWEnableValue,
                hwPWRemoteVcMaxAtmCells
                    Unsigned32,
                hwPWRemoteVcNotif
                    TruthValue
             }

        hwPWRemoteVcID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Used in the outgoing PW ID field within the 'Virtual 
                Circuit FEC Element' of the remote PW."
            ::= { hwPWRemoteVcEntry 1 }

        
        hwPWRemoteVcType OBJECT-TYPE
            SYNTAX HWL2VpnVcEncapsType
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This value indicate the service to be carried over 
                the remote PW."
            ::= { hwPWRemoteVcEntry 2 }

        
        hwPWRemoteVcStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the forwarding status of the remote VC."
            ::= { hwPWRemoteVcEntry 3 }

        
        hwPWRemoteVcGroupID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the Group ID field of the remote PW.
                Currently, this value always be zero."
            ::= { hwPWRemoteVcEntry 4 }

        
        hwPWRemoteVcMtu OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 46..9600)
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the supported MTU size of the remote PW."
            ::= { hwPWRemoteVcEntry 5 }

        
        hwPWRemoteVcCtrlword OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the control word capability of the remote PW."
            ::= { hwPWRemoteVcEntry 6 }

        
        hwPWRemoteVcMaxAtmCells OBJECT-TYPE
            SYNTAX Unsigned32 (0..65535)
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the max cell supported of the remote PW 
                when vctype is atm."
            ::= { hwPWRemoteVcEntry 7 }

        
        hwPWRemoteVcNotif OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates notification is supported by the remote PW."
            ::= { hwPWRemoteVcEntry 8 }

        
--          
-- The Leaf Nodes of hwPwe3MIBObjects
-- 
        hwPWVcSwitchNotifEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "If this object is set to enable(1), then it enables 
                the emission of hwPWVcSwitchWtoP and hwPWVcSwitchPtoW 
                notifications; otherwise these notifications are not 
                emitted.
                The default value is disable (2)."                
            ::= { hwPwe3Objects 5 }

        
        hwPWVcUpDownNotifEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "This object indicates the enable sign of PW VC state
                change notification.
                The default value is disable (2)."
            ::= { hwPwe3Objects 6 }

        
        hwPWVcDeletedNotifEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "This object indicates the enable sign of PW VC deletion
                notification.
                The default value is disable (2)."
            ::= { hwPwe3Objects 7 }

        
        hwPWVcStateChangeReason OBJECT-TYPE
            SYNTAX HWL2VpnStateChangeReason
            MAX-ACCESS accessible-for-notify
            STATUS current
            DESCRIPTION
                "This object indicates the cause of the VC status change."
            ::= { hwPwe3Objects 8 }

        
        hwPWVcSwitchRmtID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS accessible-for-notify
            STATUS current
            DESCRIPTION
                "This object indicates the VC ID of PW
                switch between working PW and protect PW ."
            ::= { hwPwe3Objects 9 }
        
        hwLdpPWStateChangeReason OBJECT-TYPE
            SYNTAX HWLdpPwStateChangeReason
            MAX-ACCESS accessible-for-notify
            STATUS current
            DESCRIPTION
                "This object indicates the reason of LDP PW VC's
                state change."
            ::= { hwPwe3Objects 10 }

--          
-- The PWE3's VC TDM Performance Information Table
-- 
        hwPWVcTDMPerfCurrentTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWVcTDMPerfCurrentEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table provides per TDM PW performance information. The contents of this
          table entry are reset to zero and gotten new information every 15 minutes."
            ::= { hwPwe3Objects 11 }
        
        hwPWVcTDMPerfCurrentEntry OBJECT-TYPE
            SYNTAX HWPWVcTDMPerfCurrentEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "An entry in this table is created by the agent for every TDM PW entry."
            INDEX { hwPWVcID, hwPWVcType }
            ::= { hwPWVcTDMPerfCurrentTable 1 }
        
        HWPWVcTDMPerfCurrentEntry ::=
            SEQUENCE { 
            hwPWVcTDMPerfCurrentMissingPkts 
                    Unsigned32,
            hwPWVcTDMPerfCurrentJtrBfrOverruns
                    Unsigned32,
            hwPWVcTDMPerfCurrentJtrBfrUnderruns
                    Unsigned32,
            hwPWVcTDMPerfCurrentMisOrderDropped
                    Unsigned32,
            hwPWVcTDMPerfCurrentMalformedPkt
                    Unsigned32,
            hwPWVcTDMPerfCurrentESs
                    Unsigned32,
            hwPWVcTDMPerfCurrentSESs
                    Unsigned32,
            hwPWVcTDMPerfCurrentUASs
                    Unsigned32
          }

        hwPWVcTDMPerfCurrentMissingPkts OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Number of missing packets (as detected via control word
                sequence number gaps)."
            ::= { hwPWVcTDMPerfCurrentEntry 1 }

        
        hwPWVcTDMPerfCurrentJtrBfrOverruns OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Number of times the jitter buffer was overrun."
            ::= { hwPWVcTDMPerfCurrentEntry 2 }

        
        hwPWVcTDMPerfCurrentJtrBfrUnderruns OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Number of times a packet needed to be played
               out and the jitter buffer was empty."
            ::= { hwPWVcTDMPerfCurrentEntry 3 }

        
        hwPWVcTDMPerfCurrentMisOrderDropped OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Number of packets detected out of order (via control word
                sequence numbers) that could not be re-ordered or could
                not fit in the jitter buffer."
            ::= { hwPWVcTDMPerfCurrentEntry 4 }

        hwPWVcTDMPerfCurrentMalformedPkt OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Number of packets detected with unexpected size or
                bad headers' stack."
            ::= { hwPWVcTDMPerfCurrentEntry 5 }

        hwPWVcTDMPerfCurrentESs OBJECT-TYPE
            SYNTAX       Unsigned32
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION
                "The counter associated with the number of Error
                 Seconds encountered.  Any malformed packet, sequence error,
                 LOPS, and the like are considered as Error Seconds." 
            ::= { hwPWVcTDMPerfCurrentEntry 6 }

        hwPWVcTDMPerfCurrentSESs OBJECT-TYPE
            SYNTAX        Unsigned32
            MAX-ACCESS    read-only
            STATUS        current
            DESCRIPTION
                "The counter associated with the number of
                 Severely Error Seconds encountered."
            ::= { hwPWVcTDMPerfCurrentEntry 7 }

        hwPWVcTDMPerfCurrentUASs OBJECT-TYPE
            SYNTAX        Unsigned32
            MAX-ACCESS    read-only
            STATUS        current
            DESCRIPTION
                "The counter associated with the number of
                 Unavailable Seconds encountered.  Any consecutive
                 ten seconds of SES are counted as one Unavailable
                 Seconds (UAS)."
            ::= { hwPWVcTDMPerfCurrentEntry 8 }
			
--          
-- PWE3 MIB Trap Definitions
-- 
        hwPwe3MIBTraps OBJECT IDENTIFIER ::= { hwPwe3MIBObjects 2 }

        
--   index of working PW
-- index of protect PW
        hwPWVcSwitchWtoP NOTIFICATION-TYPE
            OBJECTS { hwPWVcCtrlWord, hwPWVcSwitchRmtID, hwPWVcStateChangeReason, hwPWVcIfName }
            STATUS current
            DESCRIPTION 
                "This notification is generated when switch from working
                PW to protect PW happens."
            ::= { hwPwe3MIBTraps 1 }

        
--   index of protect PW
-- index of working PW
        hwPWVcSwitchPtoW NOTIFICATION-TYPE
            OBJECTS { hwPWVcCtrlWord, hwPWVcSwitchRmtID, hwPWVcStateChangeReason, hwPWVcIfName }
            STATUS current
            DESCRIPTION 
                "This notification is generated when switch from protect
                PW to working PW happens."
            ::= { hwPwe3MIBTraps 2 }

        
        hwPWVcDown NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwPWVcIfIndex, hwPWVcInboundLabel, hwPWVcOutboundLabel, hwPWVcSecondary, 
                hwPWVcStateChangeReason, sysUpTime, hwPWVcIfName, hwPWVcSwitchID, hwPWVcTnlPolicyName,hwPWVcActive, hwL2vpnTnlType, hwL2vpnTunnelIndex }
            STATUS current
            DESCRIPTION 
                "This notification indicates the VC's state changes to down."
            ::= { hwPwe3MIBTraps 3 }

        
        hwPWVcUp NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwPWVcIfIndex, hwPWVcInboundLabel, hwPWVcOutboundLabel, hwPWVcSecondary, 
                hwPWVcStateChangeReason, sysUpTime, hwPWVcIfName, hwPWVcSwitchID, hwPWVcTnlPolicyName,hwPWVcActive }
            STATUS current
            DESCRIPTION 
                "This notification indicates the VC's state changes to up."
            ::= { hwPwe3MIBTraps 4 }

        
        hwPWVcDeleted NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwPWVcIfIndex, hwPWVcInboundLabel, hwPWVcOutboundLabel, hwPWVcSecondary, hwPWVcIfName, hwPWVcSwitchID
                 }
            STATUS current
            DESCRIPTION 
                "This notification indicates the VC is deleted."
            ::= { hwPwe3MIBTraps 5 }

        
        hwPWVcBackup NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwPWVcIfIndex, hwPWVcInboundLabel, hwPWVcOutboundLabel, hwPWVcSecondary, 
                hwPWVcStateChangeReason, sysUpTime ,hwPWVcIfName, hwPWVcSwitchID,hwPWVcActive }
            STATUS current
            DESCRIPTION 
                "This notification indicates the VC's state changes to backup."
            ::= { hwPwe3MIBTraps 6 }

        hwLdpPWVcDown NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwLdpPWStateChangeReason }
            STATUS current
            DESCRIPTION 
                "This notification indicates the LDP PW VC's state changes to down."
            ::= { hwPwe3MIBTraps 7 }

        hwLdpPWVcUp NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwLdpPWStateChangeReason }
            STATUS current
            DESCRIPTION 
                "This notification indicates the Ldp PW VC's state changes to up."
            ::= { hwPwe3MIBTraps 8 }
        
        hwPWVcStatusChange NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwPWVcStatus, hwPWVcActive }
            STATUS current
            DESCRIPTION 
                "This notification indicates the VC's Active state changed."
            ::= { hwPwe3MIBTraps 9 }

        hwVpwsPwRedundancyDegraded NOTIFICATION-TYPE
            OBJECTS { hwPWVcIfIndex, hwPWVcIfName }
            STATUS current
            DESCRIPTION 
                "VPWS PW redundancy reported a protect degraded alarm."
            ::= { hwPwe3MIBTraps 10 }
			
        hwVpwsPwRedundancyDegradedClear NOTIFICATION-TYPE
            OBJECTS { hwPWVcIfIndex, hwPWVcIfName }
            STATUS current
            DESCRIPTION 
                "VPWS PW redundancy reported the clearing of the protect degraded alarm."
            ::= { hwPwe3MIBTraps 11 }

        
		
       hwRemoteApPwParaMisMatch NOTIFICATION-TYPE
            OBJECTS {  hwPWVcPeerAddr, hwPWVcPwTdmEncapsulationNum, hwPWVcPwJitterBufferDepth, hwPWVcPwRtpHeader,
			          hwPWVcPwIdleCode,hwPWVcIfName ,hwL2vpnAcIfPhyType,hwL2vpnAcIfLinkType,hwL2vpnAcIfEncap,hwL2vpnAcIfMinEncapNum,hwL2vpnAcIfMaxEncapNum,hwL2vpnAcIfEncapStep,hwL2vpnAcIfMinJitterBuffer,
					  hwL2vpnAcIfMaxJitterBuffer,hwL2vpnAcIfJitterBufferStep,hwL2vpnAcIfCfgTtpHeader,hwL2vpnAcIfMinIdleCode,hwL2vpnAcIfMaxIdleCode}
            STATUS current
            DESCRIPTION 
            "This notification indicates the low-speed interface parameter settings reported by the remoter AP mismatch those of the PW."
            ::= { hwPwe3MIBTraps 12 }
			
      hwRemoteApPwParaMisMatchResume NOTIFICATION-TYPE
            OBJECTS { hwPWVcPeerAddr, hwPWVcPwTdmEncapsulationNum, hwPWVcPwJitterBufferDepth, hwPWVcPwRtpHeader,
			          hwPWVcPwIdleCode,hwPWVcIfName ,hwL2vpnAcIfPhyType,hwL2vpnAcIfLinkType,hwL2vpnAcIfEncap,hwL2vpnAcIfMinEncapNum,hwL2vpnAcIfMaxEncapNum,hwL2vpnAcIfEncapStep,hwL2vpnAcIfMinJitterBuffer,
					  hwL2vpnAcIfMaxJitterBuffer,hwL2vpnAcIfJitterBufferStep,hwL2vpnAcIfCfgTtpHeader,hwL2vpnAcIfMinIdleCode,hwL2vpnAcIfMaxIdleCode}
            STATUS current
            DESCRIPTION        
            "This notification indicates the low-speed interface parameter settings reported by the remoter AP match those of the PW."
            ::= { hwPwe3MIBTraps 13 }
			
        hwSvcObjects OBJECT IDENTIFIER ::= { hwPwe3MIBObjects 3 }

        
--          
-- The L2VPN's SVC Table
-- 
        hwSvcTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWSvcEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table is the SVC configuration table. Users
                can create or delete a SVC by it."
            ::= { hwSvcObjects 1 }

        
        hwSvcEntry OBJECT-TYPE
            SYNTAX HWSvcEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of a SVC entry."
            INDEX { hwSvcIfIndex }
            ::= { hwSvcTable 1 }

        
        HWSvcEntry ::=
            SEQUENCE { 
                hwSvcIfIndex
                    InterfaceIndexOrZero,
                hwSvcID
                    Unsigned32,
                hwSvcType
                    HWL2VpnVcEncapsType,
                hwSvcPeerAddrType
                    InetAddressType,
                hwSvcPeerAddr
                    IpAddress,
                hwSvcStatus
                    INTEGER,
                hwSvcInboundLabel
                    Unsigned32,
                hwSvcOutboundLabel
                    Unsigned32,
                hwSvcGroupID
                    Unsigned32,
                hwSvcAcStatus
                    INTEGER,
                hwSvcACOAMStatus
                    INTEGER,
                hwSvcMtu
                    Integer32,
                hwSvcCtrlWord
                    HWEnableValue,
                hwSvcVCCV
                    BITS,
                hwSvcBandWidth
                    Unsigned32,
                hwSvcMaxAtmCells
                    Unsigned32,
                hwSvcTnlPolicyName
                    OCTET STRING,
                hwSvcQoSBehaviorIndex
                    Unsigned32,
                hwSvcPWTemplateName
                    OCTET STRING,
                hwSvcUpTime
                    Unsigned32,
                hwSvcOAMSync
                    TruthValue,
                hwSvcForBfdIndex
                    Unsigned32,
                hwSvcSecondary
                    TruthValue,
                hwSvcDelayTime
                    Unsigned32,
                hwSvcReroutePolicy
                    INTEGER,
                hwSvcResumeTime
                    Unsigned32,
                hwSvcRerouteReason
                    HWL2VpnStateChangeReason,
                hwSvcLastRerouteTime
                    Unsigned32,
                hwSvcManualSetFault
                    TruthValue,
                hwSvcActive
                    TruthValue,
                hwSvcUpStartTime
                    DisplayString,
                hwSvcUpSumTime
                    Unsigned32,                
                hwSvcAtmPackOvertime
                    Unsigned32,
                hwSvcPwJitterBufferDepth
                    Unsigned32,    
                hwSvcPwTdmEncapsulationNum
                    Unsigned32,      
                hwSvcPwIdleCode
                    Unsigned32,    
                hwSvcPwRtpHeader
                    Unsigned32,
                hwSvcRawOrTagged
                    INTEGER,
                hwSvcInterworkingType
                    INTEGER,
                hwSvcCir
                    Unsigned32, 
                hwSvcPir
                    Unsigned32, 
                hwSvcQosProfile
                    DisplayString, 
                hwSvcRowStatus
                    RowStatus
             }

        hwSvcIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Index of the interface (or the virtual interface) 
                associated with the PW."
            ::= { hwSvcEntry 1 }

        
        hwSvcID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual 
                Circuit FEC Element'."
            ::= { hwSvcEntry 2 }

        
        hwSvcType OBJECT-TYPE
            SYNTAX HWL2VpnVcEncapsType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.This value indicate the service to be carried over 
                this PW."
            ::= { hwSvcEntry 3 }

        
        hwSvcPeerAddrType OBJECT-TYPE
            SYNTAX InetAddressType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Denotes the address type of the peer node. It should be  
                set to 'unknown' if PE/PW maintenance protocol is not used 
                and the address is unknown.
                Currently, support 'ipv4' only."
            DEFVAL { ipv4 }
            ::= { hwSvcEntry 4 }

        
        hwSvcPeerAddr OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object contain the value of the peer node address 
                of the PW/PE maintenance protocol entity. This object  
                SHOULD contain a value of all zeroes if not applicable  
                (hwSvcPeerAddrType is 'unknown')."
            ::= { hwSvcEntry 5 }

        
        hwSvcStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the status of the PW in the local node.
                Currently, can't support 'plugout'."
            ::= { hwSvcEntry 6 }

        
        hwSvcInboundLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the inbound label."
            ::= { hwSvcEntry 7 }

        
        hwSvcOutboundLabel OBJECT-TYPE
            SYNTAX Unsigned32 
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the outbound label."
            ::= { hwSvcEntry 8 }

        
        hwSvcGroupID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Used in the Group ID field sent to the peer PWES  
                within the maintenance protocol used for PW setup. 
                Applicable if SvcOwner equal 'pwIdFecSignaling' or  
                'l2tpControlProtocol', should be set to zero otherwise.
                Currently, this value always be zero."
            ::= { hwSvcEntry 9 }

        
        hwSvcAcStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Local AC status.
                Currently, can't support 'plugout'."
            ::= { hwSvcEntry 10 }

        
        hwSvcACOAMStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the AC's protocol is operational or not."
            ::= { hwSvcEntry 11 }

        
        hwSvcMtu OBJECT-TYPE
            SYNTAX Integer32 (0 | 46..9600)
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "If not equal zero, the optional Mtu object in the  
                signaling protocol will be sent with this value,  
                representing the locally supported MTU size over the  
                interface (or the virtual interface) associated with the  
                PW.Currently, can't support.'0' is the default value."
            ::= { hwSvcEntry 12 }

        
        hwSvcCtrlWord OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "If signaling is used for PW establishment, this object  
                indicates the status of the control word negotiation,  
                and in both signaling or manual configuration indicates  
                if CW is to be present or not for this PW."
            ::= { hwSvcEntry 13 }

        
        hwSvcVCCV OBJECT-TYPE
            SYNTAX BITS
                {
                ccCw(0),
                ccAlert(1),
                ccLabel(2),
                cvIcmpping(3),
                cvLspping(4),
                cvBfd(5)
                }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the optional VCCV capabilities of the SVC.
                According to whether the control word is enabled, 
                the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) 
                or ccAlert(1)|cvLspping(4)|cvBfd(5). The default 
                value is ccAlert(1)|cvLspping(4)|cvBfd(5)."
            ::= { hwSvcEntry 14 }

        
        hwSvcBandWidth OBJECT-TYPE
            SYNTAX Unsigned32 (0..32000000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the bandwidth.Currently, can't support.'0' is the default value."
            ::= { hwSvcEntry 15 }

        
        hwSvcMaxAtmCells OBJECT-TYPE
            SYNTAX Unsigned32 (0..28)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the max cell supported when vc type is atm."
            ::= { hwSvcEntry 16 }

        
        hwSvcTnlPolicyName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..39))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the tunnel policy name used."
            ::= { hwSvcEntry 17 }

        
        hwSvcQoSBehaviorIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the traffic behavior Index when QOS is implemented.
                Currently, can't support.'0' is the default value."
            ::= { hwSvcEntry 18 }

        
        hwSvcPWTemplateName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..19))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the PW template index referenced."
            ::= { hwSvcEntry 19 }

        
        hwSvcUpTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the duration when the SVC keeps Up 
                for the last time, in seconds."
            ::= { hwSvcEntry 20 }

        
        hwSvcOAMSync OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the AC and PSN are enable or not."
            ::= { hwSvcEntry 21 }

        
        hwSvcForBfdIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The index of PW for BFD."
            ::= { hwSvcEntry 22 }

        
        hwSvcSecondary OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'."
            ::= { hwSvcEntry 23 }

        
        hwSvcDelayTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The reroute delay time."
            ::= { hwSvcEntry 24 }

        
        hwSvcReroutePolicy OBJECT-TYPE
            SYNTAX INTEGER
                {
                delay(1),
                immediately(2),
                never(3),
                none(4),
                err(5),
                invalid(6)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Reroute policy."
            ::= { hwSvcEntry 25 }

        
        hwSvcResumeTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The reroute resume time.Currently, can't support.Return the default value is '0'."
            ::= { hwSvcEntry 26 }

        
        hwSvcRerouteReason OBJECT-TYPE
            SYNTAX HWL2VpnStateChangeReason
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Last reroute reason."
            ::= { hwSvcEntry 27 }

        
        hwSvcLastRerouteTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Last  reroute time."
            ::= { hwSvcEntry 28 }

        
        hwSvcManualSetFault OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'."
            ::= { hwSvcEntry 29 }

        
        hwSvcActive OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the current vc is active or not."
            ::= { hwSvcEntry 30 }

        hwSvcUpStartTime OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Specifies the time this PW status was Up(1)."
            ::= { hwSvcEntry 31 }
            
        hwSvcUpSumTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the accumulated time when the SVC is Up, 
                in seconds."
            ::= { hwSvcEntry 32 }   
         
            
        hwSvcAtmPackOvertime OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 100..50000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the AtmPackOvertime."
            ::= { hwSvcEntry 33 }
              
        hwSvcPwJitterBufferDepth OBJECT-TYPE
            SYNTAX Unsigned32 (0..64)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwJitterBufferDepth."
            ::= { hwSvcEntry 34 }   
                    
        hwSvcPwTdmEncapsulationNum OBJECT-TYPE
            SYNTAX Unsigned32 (0..40)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwTdmEncapsulationNum."
            ::= { hwSvcEntry 35 }
            
        hwSvcPwIdleCode OBJECT-TYPE
            SYNTAX Unsigned32 (0..255 | 65535)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwIdleCode."
            ::= { hwSvcEntry 36 }
              
        hwSvcPwRtpHeader OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwRtpHeader."
            ::= { hwSvcEntry 37 } 
            
        hwSvcRawOrTagged OBJECT-TYPE
            SYNTAX INTEGER
            {
            raw(1),
            tagged(2),
            rawTagNotConfiged(3)
            }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies whether the VLAN tag of the SVC entry is attached or stripped."
            ::= { hwSvcEntry 38 }
            
        hwSvcInterworkingType OBJECT-TYPE
            SYNTAX INTEGER
            {
            ipInterWorking(1),
            ipLayer2(2),
            ipUnknown(3)
            }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the interworking type of the SVC entry."
            ::= { hwSvcEntry 39 }
            
        hwSvcCir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the committed information rate, based on the SVC entry."
            ::= { hwSvcEntry 40 }
                        
        hwSvcPir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the peak information rate, based on the SVC entry."
            ::= { hwSvcEntry 41 }
                        
        hwSvcQosProfile  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies the QoS profile's name, based on the SVC entry."
            ::= { hwSvcEntry 42 } 
            
        hwSvcRowStatus OBJECT-TYPE
            SYNTAX RowStatus
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "RowStatus for this Table.
                Restriction:
                  The row must be created by 'createAndGo' handle only.
                  Handle 'createAndWait' is forbidden.
                  Not support modifying configuration."
            ::= { hwSvcEntry 51 }

        
--          
-- The L2VPN's SVC Tunnel Table
-- 
        hwSvcTnlTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWSvcTnlEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table is used to search the tunnel index of a SVC."
            ::= { hwSvcObjects 2 }

        
        hwSvcTnlEntry OBJECT-TYPE
            SYNTAX HWSvcTnlEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of a SVC tunnel entry."
            INDEX { hwSvcIfIndex, hwSvcTnlIndex }
            ::= { hwSvcTnlTable 1 }

        
        HWSvcTnlEntry ::=
            SEQUENCE { 
                hwSvcTnlIndex
                    Unsigned32,
                hwSvcTnlType
                    INTEGER,
                hwSvcTnlForBfdIndex
                    Unsigned32
             }

        hwSvcTnlIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This object indicates the tunnel index of the SVC."
            ::= { hwSvcTnlEntry 1 }

        
        hwSvcTnlType OBJECT-TYPE
            SYNTAX INTEGER
                {
                lsp(1),
                gre(2),
                ipsec(3),
                crLsp(4)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the tunnel type."
            ::= { hwSvcTnlEntry 2 }

        
        hwSvcTnlForBfdIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This object indicates the index of LSP for BFD.
                Currently, can't support.Return the default value is '0'."
            ::= { hwSvcTnlEntry 3 }

        
--          
-- The L2VPN's SVC Statistics Table
-- 
        hwSvcStatisticsTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWSvcStatisticsEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table contains the L2vpn's SVC packets statistics."
            ::= { hwSvcObjects 3 }

        
        hwSvcStatisticsEntry OBJECT-TYPE
            SYNTAX HWSvcStatisticsEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of the L2VPN's SVC packets
                Statistics."
            INDEX { hwSvcIfIndex }
            ::= { hwSvcStatisticsTable 1 }

        
        HWSvcStatisticsEntry ::=
            SEQUENCE { 
                hwSvcStatisticsRcvPkts
                    Counter64,
                hwSvcStatisticsRcvBytes
                    Counter64,
                hwSvcStatisticsSndPkts
                    Counter64,
                hwSvcStatisticsSndBytes
                    Counter64
             }

        hwSvcStatisticsRcvPkts OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of packets received on this SVC."
            ::= { hwSvcStatisticsEntry 1 }

        
        hwSvcStatisticsRcvBytes OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of bytes received on this SVC."
            ::= { hwSvcStatisticsEntry 2 }

        
        hwSvcStatisticsSndPkts OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of packets sent on this SVC."
            ::= { hwSvcStatisticsEntry 3 }

        
        hwSvcStatisticsSndBytes OBJECT-TYPE
            SYNTAX Counter64
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The total number of bytes sent on the SVC."
            ::= { hwSvcStatisticsEntry 4 }

--          
-- The L2VPN's SVC Extend Table
-- 
        hwSvcExtTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWSvcExtEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table is the SVC configuration extend table. Users
                can query a SVC by it."
            ::= { hwSvcObjects 8 }

        
        hwSvcExtEntry OBJECT-TYPE
            SYNTAX HWSvcExtEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of a SVC entry."
            INDEX { hwSvcExtIfIndex, hwSvcExtPWType }
            ::= { hwSvcExtTable 1 }

             HWSvcExtEntry ::=
            SEQUENCE { 
                hwSvcExtIfIndex
                    InterfaceIndexOrZero,
                hwSvcExtPWType
                    HWL2VpnVcType,
                hwSvcExtID
                    Unsigned32,
                hwSvcExtType
                    HWL2VpnVcEncapsType,
                hwSvcExtPeerAddrType
                    InetAddressType,
                hwSvcExtPeerAddr
                    IpAddress,
                hwSvcExtStatus
                    INTEGER,
                hwSvcExtInboundLabel
                    Unsigned32,
                hwSvcExtOutboundLabel
                    Unsigned32,
                hwSvcExtAcStatus
                    INTEGER,
                hwSvcExtACOAMStatus
                    INTEGER,
                 hwSvcExtCtrlWord
                    HWEnableValue,
                hwSvcExtVCCV
                    BITS,
                hwSvcExtMaxAtmCells
                    Unsigned32,
                hwSvcExtTnlPolicyName
                    OCTET STRING,
                hwSvcExtPWTemplateName
                    OCTET STRING,
                hwSvcExtUpTime
                    Unsigned32,
                hwSvcExtOAMSync
                    TruthValue,
                hwSvcExtForBfdIndex
                    Unsigned32,
                hwSvcExtSecondary
                    TruthValue,
                hwSvcExtDelayTime
                    Unsigned32,
                hwSvcExtReroutePolicy
                    INTEGER,
                hwSvcExtRerouteReason
                    HWL2VpnStateChangeReason,
                hwSvcExtLastRerouteTime
                    Unsigned32,
                hwSvcExtManualSetFault
                    TruthValue,
                hwSvcExtActive
                    TruthValue,
                hwSvcExtUpStartTime
                    DisplayString,
                hwSvcExtUpSumTime
                    Unsigned32,                
                hwSvcExtAtmPackOvertime
                    Unsigned32,
                hwSvcExtPwJitterBufferDepth
                    Unsigned32,    
                hwSvcExtPwTdmEncapsulationNum
                    Unsigned32,      
                hwSvcExtPwIdleCode
                    Unsigned32,    
                hwSvcExtPwRtpHeader
                    Unsigned32,
                hwSvcExtRawOrTagged
                    INTEGER,
                hwSvcExtInterworkingType
                    INTEGER, 
                hwSvcExtRowStatus
                    RowStatus,
                hwSvcExtCir
                    Unsigned32, 
                hwSvcExtPir
                    Unsigned32, 
                hwSvcExtQosProfile
                    DisplayString
             }

        hwSvcExtIfIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Index of the interface (or the virtual interface) 
                associated with the PW."
            ::= { hwSvcExtEntry 1 }
        
        hwSvcExtPWType OBJECT-TYPE
            SYNTAX HWL2VpnVcType
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.This value indicate the type of the LDP PW VC."
            ::= { hwSvcExtEntry 2 }
            
		hwSvcExtID OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual 
                Circuit FEC Element'."
            ::= { hwSvcExtEntry 3 }
        
        hwSvcExtType OBJECT-TYPE
            SYNTAX HWL2VpnVcEncapsType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.This value indicate the service to be carried over 
                this PW."
            ::= { hwSvcExtEntry 4 }
            
        hwSvcExtPeerAddrType OBJECT-TYPE
            SYNTAX InetAddressType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Denotes the address type of the peer node. It should be  
                set to 'unknown' if PE/PW maintenance protocol is not used 
                and the address is unknown.
                Currently, support 'ipv4' only."
            DEFVAL { ipv4 }
           ::= { hwSvcExtEntry 5 }

        
        hwSvcExtPeerAddr OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object contain the value of the peer node address 
                of the PW/PE maintenance protocol entity. This object  
                SHOULD contain a value of all zeroes if not applicable  
                (hwSvcExtPeerAddrType is 'unknown')."
            ::= { hwSvcExtEntry 6 }
        
        			hwSvcExtStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the status of the PW in the local node.
                Currently, can't support 'plugout'."
            ::= { hwSvcExtEntry 7 }

        
        hwSvcExtInboundLabel OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the inbound label."
            ::= { hwSvcExtEntry 8 }

        
        hwSvcExtOutboundLabel OBJECT-TYPE
            SYNTAX Unsigned32 
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the outbound label."
            ::= { hwSvcExtEntry 9 }
        
        hwSvcExtAcStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2),
                plugout(3)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Local AC status.
                Currently, can't support 'plugout'."
            ::= { hwSvcExtEntry 10 }

        
        hwSvcExtACOAMStatus OBJECT-TYPE
            SYNTAX INTEGER
                {
                up(1),
                down(2)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the AC's protocol is operational or not."
            ::= { hwSvcExtEntry 11 }
        
        hwSvcExtCtrlWord OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "If signaling is used for PW establishment, this object  
                indicates the status of the control word negotiation,  
                and in both signaling or manual configuration indicates  
                if CW is to be present or not for this PW."
            ::= { hwSvcExtEntry 12 }

        
        hwSvcExtVCCV OBJECT-TYPE
            SYNTAX BITS
                {
                ccCw(0),
                ccAlert(1),
                ccLabel(2),
                cvIcmpping(3),
                cvLspping(4),
                cvBfd(5)
                }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the optional VCCV capabilities of the SVC.
                According to whether the control word is enabled, 
                the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) 
                or ccAlert(1)|cvLspping(4)|cvBfd(5). The default 
                value is ccAlert(1)|cvLspping(4)|cvBfd(5)."
            ::= { hwSvcExtEntry 13 }

        hwSvcExtMaxAtmCells OBJECT-TYPE
            SYNTAX Unsigned32 (0..28)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the max cell supported when vc type is atm."
            ::= { hwSvcExtEntry 14 }

        
        hwSvcExtTnlPolicyName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..39))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the tunnel policy name used."
            ::= { hwSvcExtEntry 15 }
        
        hwSvcExtPWTemplateName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..19))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the PW template index referenced."
            ::= { hwSvcExtEntry 16 }

        
        hwSvcExtUpTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the duration when the SVC keeps Up 
                for the last time, in seconds."
            ::= { hwSvcExtEntry 17 }

        
        hwSvcExtOAMSync OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the AC and PSN are enable or not."
            ::= { hwSvcExtEntry 18 }

        
        hwSvcExtForBfdIndex OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The index of PW for BFD.Currently, can't support.Return the default value is '0'."
            ::= { hwSvcExtEntry 19 }

        
        hwSvcExtSecondary OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'."
            ::= { hwSvcExtEntry 20 }

        
        hwSvcExtDelayTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The reroute delay time.Currently, can't support.Return the default value is '0'."
            ::= { hwSvcExtEntry 21 }

        
        hwSvcExtReroutePolicy OBJECT-TYPE
            SYNTAX INTEGER
                {
                delay(1),
                immediately(2),
                never(3),
                none(4),
                err(5),
                invalid(6)
                }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Reroute policy.Currently, can't support.Return the default value is 'invalid(6)'."
            ::= { hwSvcExtEntry 22 }

        hwSvcExtRerouteReason OBJECT-TYPE
            SYNTAX HWL2VpnStateChangeReason
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Last reroute reason.Currently, can't support.Return the default value is 'invalidReason(1)'."
            ::= { hwSvcExtEntry 23 }

        
        hwSvcExtLastRerouteTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Last  reroute time.Currently, can't support.Return the default value is '0'."
            ::= { hwSvcExtEntry 24 }

        
        hwSvcExtManualSetFault OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'."
            ::= { hwSvcExtEntry 25 }

        
        hwSvcExtActive OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Denotes the current vc is active or not.Currently, can't support.Return the default value is 'false'."
            ::= { hwSvcExtEntry 26 }

        hwSvcExtUpStartTime OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Specifies the time this PW status was Up(1)."
            ::= { hwSvcExtEntry 27 }
            
        hwSvcExtUpSumTime OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the accumulated time when the SVC is Up, 
                in seconds."
            ::= { hwSvcExtEntry 28 }          
            
        hwSvcExtAtmPackOvertime OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 100..50000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the AtmPackOvertime."
            ::= { hwSvcExtEntry 29 }
              
        hwSvcExtPwJitterBufferDepth OBJECT-TYPE
            SYNTAX Unsigned32 (0..64)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwJitterBufferDepth."
            ::= { hwSvcExtEntry 30 }   
                    
        hwSvcExtPwTdmEncapsulationNum OBJECT-TYPE
            SYNTAX Unsigned32 (0..40)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwTdmEncapsulationNum."
            ::= { hwSvcExtEntry 31 }
            
        hwSvcExtPwIdleCode OBJECT-TYPE
            SYNTAX Unsigned32 (0..255 | 65535)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwIdleCode."
            ::= { hwSvcExtEntry 32 }
              
        hwSvcExtPwRtpHeader OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwRtpHeader."
            ::= { hwSvcExtEntry 33 } 
            
        hwSvcExtRawOrTagged OBJECT-TYPE
            SYNTAX INTEGER
            {
            raw(1),
            tagged(2),
            rawTagNotConfiged(3)
            }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies whether the VLAN tag of the SVC entry is attached or stripped."
            ::= { hwSvcExtEntry 34 }
            
        hwSvcExtInterworkingType OBJECT-TYPE
            SYNTAX INTEGER
            {
            ipInterWorking(1),
            ipLayer2(2),
            ipUnknown(3)
            }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the interworking type of the SVC entry."
            ::= { hwSvcExtEntry 35 }
            
        hwSvcExtRowStatus OBJECT-TYPE
            SYNTAX RowStatus
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "RowStatus for this Table.
                Restriction:
                  The row must be created by 'createAndGo' handle only.
                  Handle 'createAndWait' is forbidden.
                  Not support modifying configuration."
            ::= { hwSvcExtEntry 36 }
            
        hwSvcExtCir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the committed information rate, based on the SVC entry."
            ::= { hwSvcExtEntry 37 }
                        
        hwSvcExtPir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the peak information rate, based on the SVC entry."
            ::= { hwSvcExtEntry 38 }
                        
        hwSvcExtQosProfile  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies the QoS profile's name, based on the SVC entry."
            ::= { hwSvcExtEntry 39 } 
        
--          
-- The Leaf Nodes of hwSvcMIBObjects
-- 
        hwSvcSwitchNotifEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "If this object is set to enable(1), then it enables 
                the emission of hwSvcSwitchWtoP and hwSvcSwitchPtoW 
                notifications; otherwise these notifications are not 
                emitted.Currently, can't support.
                The default value is disable (2)."
            ::= { hwSvcObjects 4 }

        
        hwSvcUpDownNotifEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "This object indicates the enable sign of PW VC state
                change notification.
                The default value is disable (2)."
            ::= { hwSvcObjects 5 }

        
        hwSvcDeletedNotifEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "This object indicates the enable sign of PW VC deletion
                notification.
                The default value is disable (2)."
            ::= { hwSvcObjects 6 }
        
        hwSvcStateChangeReason OBJECT-TYPE
            SYNTAX HWL2VpnStateChangeReason
            MAX-ACCESS accessible-for-notify
            STATUS current
            DESCRIPTION
                "This object indicates the reason of PE VC
                state change."
            ::= { hwSvcObjects 7 }

        
--          
-- L2VPN SVC MIB Trap Definitions
-- 
        hwL2vpnSvcMIBTraps OBJECT IDENTIFIER ::= { hwPwe3MIBObjects 4 }

        
        hwSvcSwitchWtoP NOTIFICATION-TYPE
            OBJECTS { hwSvcID, hwSvcType, hwSvcCtrlWord, hwSvcStateChangeReason, ifName }
            STATUS current
            DESCRIPTION 
                "This notification is generated when switch from working
                PW to protect PW happens.Currently, can't support."
            ::= { hwL2vpnSvcMIBTraps 1 }

        
        hwSvcSwitchPtoW NOTIFICATION-TYPE
            OBJECTS { hwSvcID, hwSvcType, hwSvcCtrlWord, hwSvcStateChangeReason, ifName }
            STATUS current
            DESCRIPTION 
                "This notification is generated when switch from protect
                PW to working PW happens.Currently, can't support."
            ::= { hwL2vpnSvcMIBTraps 2 }

        
        hwSvcDown NOTIFICATION-TYPE
            OBJECTS { hwSvcID, hwSvcType, hwSvcPeerAddr, hwSvcInboundLabel, hwSvcOutboundLabel, 
                hwSvcStateChangeReason, ifName, hwSvcTnlPolicyName,hwSvcActive, hwL2vpnTnlType, hwL2vpnTunnelIndex }
            STATUS current
            DESCRIPTION 
                "This notification indicates the SVC's state changes to down."
            ::= { hwL2vpnSvcMIBTraps 3 }

        
        hwSvcUp NOTIFICATION-TYPE
            OBJECTS { hwSvcID, hwSvcType, hwSvcPeerAddr, hwSvcInboundLabel, hwSvcOutboundLabel, 
                hwSvcStateChangeReason, ifName, hwSvcTnlPolicyName,hwSvcActive }
            STATUS current
            DESCRIPTION 
                "This notification indicates the SVC's state changes to up."
            ::= { hwL2vpnSvcMIBTraps 4 }

        
        hwSvcDeleted NOTIFICATION-TYPE
            OBJECTS { hwSvcID, hwSvcType, hwSvcPeerAddr, hwSvcInboundLabel, 
                hwSvcOutboundLabel, ifName }
            STATUS current
            DESCRIPTION 
                "This notification indicates the SVC is deleted."
            ::= { hwL2vpnSvcMIBTraps 5 }

        
--          
-- The PWE3's Template Table
-- 
        hwPWTemplateTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWTemplateEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table specifies information for configuring and 
                status monitoring to PW tempalte."
            ::= { hwPwe3MIBObjects 5 }

        
        hwPWTemplateEntry OBJECT-TYPE
            SYNTAX HWPWTemplateEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "A row in this table represents a pseudo wire (PW) template. 
                It is indexed by hwPWCmdTemplateIndex, which uniquely 
                identifying a singular tempalte."
            INDEX { hwPWTemplateName }
            ::= { hwPWTemplateTable 1 }

        
        HWPWTemplateEntry ::=
            SEQUENCE { 
                hwPWTemplateName
                    OCTET STRING,
                hwPWTemplatePeerAddrType
                    InetAddressType,
                hwPWTemplatePeerAddr
                    IpAddress,
                hwPWTemplateCtrlword
                    HWEnableValue,
                hwPWTemplateVCCV
                    BITS,
                hwPWTemplateFrag
                    TruthValue,
                hwPWTemplateBandwidth
                    Integer32,
                hwPWTemplateTnlPolicyName
                    OCTET STRING,
                hwPWTemplateQoSBehaviorIndex
                    Integer32,
                hwPWTemplateExplicitPathName
                    OCTET STRING,
                hwPWTemplateBFDDetectMultiplier
                    Unsigned32,
                hwPWTemplateBFDMinReceiveInterval
                    Unsigned32,
                hwPWTemplateBFDMinTransmitInterval
                    Unsigned32,
                hwPWTemplateDynamicBFDDetect
                    TruthValue,
                hwPWTemplateMaxAtmCells
                    Unsigned32,    
                hwPWTemplateAtmPackOvertime
                    Unsigned32,
                hwPWTemplatePwJitterBufferDepth
                    Unsigned32,    
                hwPWTemplatePwTdmEncapsulationNum
                    Unsigned32,      
                hwPWTemplatePwIdleCode
                    Unsigned32,    
                hwPWTemplatePwRtpHeader
                    Unsigned32,
                hwPWTemplatePwCCSeqEnable
                    HWEnableValue,            
                hwPWTemplateCir
                    Unsigned32,
                hwPWTemplatePir
                    Unsigned32,
                hwPWTemplateQosProfile
                    DisplayString,  
                hwPWTemplateFlowLabel
                    EnabledStatus,              
                hwPWTemplateRowStatus
                    RowStatus
             }

        hwPWTemplateName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..19))
            MAX-ACCESS accessible-for-notify
            STATUS current
            DESCRIPTION
                "The name of the PW template.
                Set by the operator to indicate the protocol responsible  
                for establishing this PW. The value 'static' is used in all 
                cases where no maintenance protocol (PW signaling) is used  
                to set-up the PW, i.e. require configuration of entries in 
                the PW tables including PW labels, etc. The value 'ldp' is 
                used in case of signaling with the PWid FEC element with LDP 
                signaling. The value 'rsvp' indicate the use of rsvp  
                control protocol."
            ::= { hwPWTemplateEntry 1 }

        
        hwPWTemplatePeerAddrType OBJECT-TYPE
            SYNTAX InetAddressType
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Denotes the address type of the peer node. It should be  
                set to 'unknown' if PE/PW maintenance protocol is not used 
                and the address is unknown.
                Currently, support 'ipv4' only."
            DEFVAL { ipv4 }
            ::= { hwPWTemplateEntry 2 }

        
        hwPWTemplatePeerAddr OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object contain the value of the peer node address 
                of the PW/PE maintenance protocol entity. "
            ::= { hwPWTemplateEntry 3 }

        
        hwPWTemplateCtrlword OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the control word capability of the switch PW."
            ::= { hwPWTemplateEntry 4 }

        
        hwPWTemplateVCCV OBJECT-TYPE
            SYNTAX BITS
                {
                ccCw(0),
                ccAlert(1),
                ccLabel(2),
                cvIcmpping(3),
                cvLspping(4),
                cvBfd(5),
                ccTtl(6)
                }
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the optional VCCV capabilities of the PW template.
                According to whether the control word is enabled, 
                the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) 
                or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default 
                value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5)."
            ::= { hwPWTemplateEntry 5 }

        
        hwPWTemplateFrag OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates whether or not fragmentaion is supported."
            ::= { hwPWTemplateEntry 6 }

        
        hwPWTemplateBandwidth OBJECT-TYPE
            SYNTAX Integer32 (0..32000000)
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Indicates the bandwitdh when signaling protocol is rsvp. 
                Currently, can't support.'0' is the default value."
            ::= { hwPWTemplateEntry 7 }

        
        hwPWTemplateTnlPolicyName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..39))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the tunnel policy name used."
            ::= { hwPWTemplateEntry 8 }

        
        hwPWTemplateQoSBehaviorIndex OBJECT-TYPE
            SYNTAX Integer32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the traffic behavior Index when QOS is
                implemented.Currently, can't support.'0' is the default value."
            ::= { hwPWTemplateEntry 9 }

        
        hwPWTemplateExplicitPathName OBJECT-TYPE
            SYNTAX OCTET STRING (SIZE (0..31))
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Indicates the explicit path name set by the operator.Currently, can't support."
            ::= { hwPWTemplateEntry 10 }

        
        hwPWTemplateBFDDetectMultiplier OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 3..50)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The multiple of detection time."
            ::= { hwPWTemplateEntry 11 }

        
        hwPWTemplateBFDMinReceiveInterval OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 3..1000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The interval of bfd messages to be received."
            ::= { hwPWTemplateEntry 12 }

        
        hwPWTemplateBFDMinTransmitInterval OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 3..1000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "The interval of bfd messages to be sent."
            ::= { hwPWTemplateEntry 13 }

        
        hwPWTemplateDynamicBFDDetect OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This value indicates the capacitability to support dynamic BFD detect."
            ::= { hwPWTemplateEntry 14 }
                
        hwPWTemplateMaxAtmCells OBJECT-TYPE
            SYNTAX Unsigned32 (0..28)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the MaxAtmCells."
            ::= { hwPWTemplateEntry 15 }
            
        hwPWTemplateAtmPackOvertime OBJECT-TYPE
            SYNTAX Unsigned32 (0 | 100..50000)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the AtmPackOvertime."
            ::= { hwPWTemplateEntry 16 }
              
        hwPWTemplatePwJitterBufferDepth OBJECT-TYPE
            SYNTAX Unsigned32 (0..64)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwJitterBufferDepth."
            ::= { hwPWTemplateEntry 17 }   
                    
        hwPWTemplatePwTdmEncapsulationNum OBJECT-TYPE
            SYNTAX Unsigned32 (0..40)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwTdmEncapsulationNum."
            ::= { hwPWTemplateEntry 18 }
            
        hwPWTemplatePwIdleCode OBJECT-TYPE
            SYNTAX Unsigned32 (0..255 | 65535)
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwIdleCode."
            ::= { hwPWTemplateEntry 19 }
              
        hwPWTemplatePwRtpHeader OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the PwRtpHeader."
            ::= { hwPWTemplateEntry 20 }
        
        hwPWTemplatePwCCSeqEnable OBJECT-TYPE
            SYNTAX HWEnableValue
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the CC Sequence is enable or not."
            ::= { hwPWTemplateEntry 21 }
            
        hwPWTemplateCir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the committed information rate, based on the PW template entry."
            ::= { hwPWTemplateEntry 22 }
            
            
        hwPWTemplatePir  OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Specifies the peak information rate, based on the PW template entry."
            ::= { hwPWTemplateEntry 23 }
            
        
        hwPWTemplateQosProfile  OBJECT-TYPE
            SYNTAX DisplayString (SIZE (0..63))
            MAX-ACCESS read-create
            STATUS current
                DESCRIPTION
                    "Specifies the QoS profile's name, based on the PW template entry."
            ::= { hwPWTemplateEntry 24 }
            
        hwPWTemplateFlowLabel OBJECT-TYPE
            SYNTAX EnabledStatus
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                   "The value of this object identifies whether the PW FlowLabel is enabled."
            ::= { hwPWTemplateEntry 25 }
      
        hwPWTemplateRowStatus OBJECT-TYPE
            SYNTAX RowStatus
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "RowStatus for this Table.
                Restriction:
                  The row must be created by 'createAndGo' handle only.
                  Handle 'createAndWait' is forbidden."
            ::= { hwPWTemplateEntry 51 }

-- PW Template MIB Trap Definitions
--         
        hwPWTemplateMIBTraps OBJECT IDENTIFIER ::= { hwPwe3MIBObjects 6 }
    
    hwPWTemplateCannotDeleted NOTIFICATION-TYPE
        OBJECTS { hwPWTemplateName }
        STATUS current
        DESCRIPTION 
        "This notification indicates the PWTemplate cannot be deleted."
        ::= { hwPWTemplateMIBTraps 1 }
       
-- The L2VPN's PW Table
-- 
        --1.3.6.1.4.1.2011.5.25.119.4.1.7
        hwPWTableObjects OBJECT IDENTIFIER ::= { hwPwe3MIBObjects 7 }

        --1.3.6.1.4.1.2011.5.25.119.4.1.7.1
        hwPWTable OBJECT-TYPE
            SYNTAX SEQUENCE OF HWPWEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This table indicates a PW, that is Static PW or LDP PW"
            ::= { hwPWTableObjects 1 }

        --1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1
        hwPWEntry OBJECT-TYPE
            SYNTAX HWPWEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Provides the information of a VC key entry."
            INDEX { hwPWId, hwPWType, hwPWPeerIp }
            ::= { hwPWTable 1 }

        HWPWEntry ::=
            SEQUENCE { 
                hwPWId
                    Unsigned32,
                hwPWType
                    HWL2VpnVcEncapsType,
                hwPWPeerIp
                    IpAddress,
                hwPWInterfaceIndex
                    InterfaceIndexOrZero
             }

        --1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.1
        hwPWId OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual 
                Circuit FEC Element'."
            ::= { hwPWEntry 1 }

        --1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.2
        hwPWType OBJECT-TYPE
            SYNTAX HWL2VpnVcEncapsType
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "Index for the conceptual row identifying a PW within  
                this PW Emulation table.This value indicate the service to be carried over 
                this PW."
            ::= { hwPWEntry 2 }

        --1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.3
        hwPWPeerIp OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "This object contain the value of the peer node address 
                of the PW/PE maintenance protocol entity. This object  
                SHOULD contain a value of all zeroes if not applicable."
            ::= { hwPWEntry 3 }

        --1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4
        hwPWInterfaceIndex OBJECT-TYPE
            SYNTAX InterfaceIndexOrZero
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "Index of the interface (or the virtual interface) 
                associated with the PW."
            ::= { hwPWEntry 4 }

--   Conformance information
-- 
        hwPwe3MIBConformance OBJECT IDENTIFIER ::= { hwL2VpnPwe3 3 }


        hwPwe3MIBCompliances OBJECT IDENTIFIER ::= { hwPwe3MIBConformance 1 }


-- this module
        hwPwe3MIBCompliance MODULE-COMPLIANCE
            STATUS current
            DESCRIPTION 
                "The compliance statement for systems supporting 
                the HUAWEI-PWE3-MIB."
            MODULE -- this module
                MANDATORY-GROUPS { hwPWVcGroup, hwPWVcTnlGroup, hwPWVcStatisticsGroup, hwPWRemoteVcGroup, hwPWTemplateGroup, 
                    hwPWNotificationControlGroup, hwPWVcStateChangeReasonGroup, hwPWVcNotificationGroup, hwPWTableGroup }
            ::= { hwPwe3MIBCompliances 1 }


        hwPwe3MIBGroups OBJECT IDENTIFIER ::= { hwPwe3MIBConformance 2 }


        hwPWVcGroup OBJECT-GROUP
            OBJECTS { hwPWVcPeerAddrType, hwPWVcPeerAddr, hwPWVcStatus, hwPWVcInboundLabel, hwPWVcOutboundLabel, 
                hwPWVcSwitchSign, hwPWVcSwitchID, hwPWVcSwitchPeerAddrType, hwPWVcSwitchPeerAddr, hwPWVcSwitchInboundLabel, 
                hwPWVcSwitchOutboundLabel, hwPWVcGroupID, hwPWVcIfIndex, hwPWVcAcStatus, hwPWVcACOAMStatus, 
                hwPWVcMtu, hwPWVcCtrlWord, hwPWVcVCCV, hwPWVcBandWidth, hwPWVcMaxAtmCells, 
                hwPWVcTnlPolicyName, hwPWVcQoSBehaviorIndex, hwPWVcExplicitPathName, hwPWVcTemplateName, hwPWVcSecondary, hwPWVcUpTime, 
                hwPWOAMSync, hwPWVCForBfdIndex, hwPWVcDelayTime, hwPWVcReroutePolicy, hwPWVcResumeTime, hwPWVcRerouteReason, hwPWVcLastRerouteTime, 
                hwPWVcManualSetFault, hwPWVcActive, hwPWVcVrIfIndex, hwPWVcVrID, hwPWBFDDetectMultiplier, hwPWBFDMinReceiveInterval, 
                hwPWBFDMinTransmitInterval, hwPWDynamicBFDDetect, hwPWBFDRemoteVcID, hwPWEthOamType, hwPWCfmMaIndex, 
                hwPWVcUpStartTime, hwPWVcUpSumTime, hwPWVcIfName, hwPWVcRowStatus, hwPWVcAtmPackOvertime, hwPWVcPwJitterBufferDepth, 
                hwPWVcPwTdmEncapsulationNum, hwPWVcPwIdleCode, hwPWVcPwRtpHeader, hwPWVcSwitchTnlPolicyName, hwPWVcCfmMdIndex,
                hwPWVcCfmMaName, hwPWVcCfmMdName, hwPWVcRawOrTagged, hwPWVcInterworkingType, hwPWVcCir, hwPWVcPir, hwPWVcQosProfile, 
                hwPWVcSwitchCir, hwPWVcSwitchPir, hwPWVcSwitchQosProfile, hwPWVcTrigger, hwPWVcEnableACOAM,
                hwPWVcSwitchVrIfIndex, hwPWVcSwitchVrID, hwPWVcQosParaFromPWT, hwPWVcBfdParaFromPWT, hwPwVcNegotiateMode, hwPwVcIsBypass, hwPwVcIsAdmin,
                hwPwVcAdminPwIfIndex, hwPwVcAdminPwLinkStatus, hwPwVcSwitchAdminPwIfIndex, hwPwVcSwitchAdminPwLinkStatus, hwPwVcSwitchBackupAdminPwIfIndex,
                hwPwVcSwitchBackupAdminPwLinkStatus, hwPwVcSwitchBackupVcId, hwPwVcSwitchBackupVcPeerAddrType, hwPwVcSwitchBackupVcPeerAddr,
                hwPwVcSwitchBackupVcReceiveLabel, hwPwVcSwitchBackupVcSendLabel, hwPwVcSwitchBackupVcTnlPolicyName, hwPwVcSwitchBackupVcCir, 
                hwPwVcSwitchBackupVcPir, hwPwVcSwitchBackupVcQosProfile, hwPwVcSlaveMasterMode, hwPwVcSwitchVcSlaveMasterMode,
                hwPwVcSwitchBackupVcSlaveMasterMode, hwPwVcSwitchVcActive, hwPwVcSwitchBackupVcActive, hwPwVcSwitchCwTrans, hwPwVcSwitchVcServiceName, hwPwVcSwitchBackupVcServiceName }
            STATUS current
            DESCRIPTION 
                "The Pwe3's VC group."
            ::= { hwPwe3MIBGroups 1 }


        hwPWVcTnlGroup OBJECT-GROUP
            OBJECTS { hwPWVcTnlType, hwPWTnlForBfdIndex }
            STATUS current
            DESCRIPTION 
                "The PWE3's VC Tunnel group."
            ::= { hwPwe3MIBGroups 2 }


        hwPWVcStatisticsGroup OBJECT-GROUP
            OBJECTS { hwPWVcStatisticsRcvPkts, hwPWVcStatisticsRcvBytes, hwPWVcStatisticsSndPkts, hwPWVcStatisticsSndBytes }
            STATUS current
            DESCRIPTION 
                "The PWE3's VC Statistics group."
            ::= { hwPwe3MIBGroups 3 }


        hwPWRemoteVcGroup OBJECT-GROUP
            OBJECTS { hwPWRemoteVcID, hwPWRemoteVcType, hwPWRemoteVcStatus, hwPWRemoteVcGroupID, hwPWRemoteVcMtu, 
                hwPWRemoteVcCtrlword, hwPWRemoteVcMaxAtmCells, hwPWRemoteVcNotif }
            STATUS current
            DESCRIPTION 
                "The PWE3's Remote VC group."
            ::= { hwPwe3MIBGroups 4 }


        hwPWTemplateGroup OBJECT-GROUP
            OBJECTS { hwPWTemplatePeerAddrType, hwPWTemplatePeerAddr, hwPWTemplateCtrlword, hwPWTemplateVCCV, hwPWTemplateFrag, 
                hwPWTemplateBandwidth, hwPWTemplateTnlPolicyName, hwPWTemplateQoSBehaviorIndex, hwPWTemplateExplicitPathName, 
                hwPWTemplateBFDDetectMultiplier, hwPWTemplateBFDMinReceiveInterval, hwPWTemplateBFDMinTransmitInterval, 
                hwPWTemplateDynamicBFDDetect, hwPWTemplateMaxAtmCells, hwPWTemplateAtmPackOvertime, hwPWTemplatePwJitterBufferDepth, 
                hwPWTemplatePwTdmEncapsulationNum, hwPWTemplatePwIdleCode, hwPWTemplatePwRtpHeader, hwPWTemplatePwCCSeqEnable, 
                hwPWTemplateCir, hwPWTemplatePir, hwPWTemplateQosProfile, hwPWTemplateFlowLabel, hwPWTemplateRowStatus }
            STATUS current
            DESCRIPTION 
                "The PWE3's Template group."
            ::= { hwPwe3MIBGroups 5 }


        hwPWNotificationControlGroup OBJECT-GROUP
            OBJECTS { hwPWVcSwitchNotifEnable, hwPWVcUpDownNotifEnable, hwPWVcDeletedNotifEnable }
            STATUS current
            DESCRIPTION 
                "The PWE3's Notification Control group."
            ::= { hwPwe3MIBGroups 6 }


        hwPWVcStateChangeReasonGroup OBJECT-GROUP
            OBJECTS { hwPWVcStateChangeReason, hwPWVcSwitchRmtID }
            STATUS current
            DESCRIPTION 
                "The PWE3's Vc State Reason group."
            ::= { hwPwe3MIBGroups 7 }


        hwPWVcNotificationGroup NOTIFICATION-GROUP
            NOTIFICATIONS { hwPWVcSwitchWtoP, hwPWVcSwitchPtoW, hwPWVcDown, hwPWVcUp, hwPWVcDeleted, 
                hwPWVcBackup, hwLdpPWVcDown, hwLdpPWVcUp,hwPWVcStatusChange,hwVpwsPwRedundancyDegraded,hwVpwsPwRedundancyDegradedClear,hwRemoteApPwParaMisMatch,hwRemoteApPwParaMisMatchResume}
            STATUS current
            DESCRIPTION 
                "The PWE3's VC Notification group."
            ::= { hwPwe3MIBGroups 8 }


        hwLdpPWStateChangeReasonGroup OBJECT-GROUP
            OBJECTS { hwLdpPWStateChangeReason }
            STATUS current
            DESCRIPTION 
                "The LDP PW VC State Reason group."
            ::= { hwPwe3MIBGroups 9 }

        hwPWVcTDMPerfCurrentGroup OBJECT-GROUP
            OBJECTS { hwPWVcTDMPerfCurrentMissingPkts, hwPWVcTDMPerfCurrentJtrBfrOverruns, hwPWVcTDMPerfCurrentJtrBfrUnderruns, 
                hwPWVcTDMPerfCurrentMisOrderDropped, hwPWVcTDMPerfCurrentMalformedPkt, hwPWVcTDMPerfCurrentESs, hwPWVcTDMPerfCurrentSESs,
                hwPWVcTDMPerfCurrentUASs }
            STATUS current
            DESCRIPTION 
                "The PWE3's VC TDM performance information group."
            ::= { hwPwe3MIBGroups 10 }
         
        hwL2vpnSvcMIBGroups OBJECT IDENTIFIER ::= { hwPwe3MIBConformance 3 }

        hwSvcGroup OBJECT-GROUP
            OBJECTS { hwSvcID, hwSvcType, hwSvcPeerAddrType, hwSvcPeerAddr, hwSvcStatus, 
                hwSvcInboundLabel, hwSvcOutboundLabel, hwSvcGroupID, hwSvcAcStatus, hwSvcACOAMStatus, 
                hwSvcMtu, hwSvcCtrlWord, hwSvcVCCV, hwSvcBandWidth, hwSvcMaxAtmCells, 
                hwSvcTnlPolicyName, hwSvcQoSBehaviorIndex, hwSvcPWTemplateName, hwSvcUpTime, hwSvcOAMSync, 
                hwSvcForBfdIndex, hwSvcSecondary, hwSvcDelayTime, hwSvcReroutePolicy, hwSvcResumeTime, 
                hwSvcRerouteReason, hwSvcLastRerouteTime, hwSvcManualSetFault, hwSvcActive, hwSvcUpStartTime, 
                hwSvcUpSumTime, hwSvcAtmPackOvertime, hwSvcPwJitterBufferDepth, hwSvcPwTdmEncapsulationNum, 
                hwSvcPwIdleCode, hwSvcPwRtpHeader, hwSvcRawOrTagged, hwSvcInterworkingType, hwSvcCir, hwSvcPir, 
                hwSvcQosProfile, hwSvcRowStatus
                 }
            STATUS current
            DESCRIPTION 
                "The L2vpn's SVC group."
            ::= { hwL2vpnSvcMIBGroups 1 }


        hwSvcTnlGroup OBJECT-GROUP
            OBJECTS { hwSvcTnlType, hwSvcTnlForBfdIndex }
            STATUS current
            DESCRIPTION 
                "The L2vpn's SVC Tunnel group."
            ::= { hwL2vpnSvcMIBGroups 2 }

        
        hwSvcStatisticsGroup OBJECT-GROUP
            OBJECTS { hwSvcStatisticsRcvPkts, hwSvcStatisticsRcvBytes, hwSvcStatisticsSndPkts, hwSvcStatisticsSndBytes }
            STATUS current
            DESCRIPTION 
                "The L2vpn's SVC Statistics group."
            ::= { hwL2vpnSvcMIBGroups 3 }


        hwSvcNotificationControlGroup OBJECT-GROUP
            OBJECTS { hwSvcSwitchNotifEnable, hwSvcUpDownNotifEnable, hwSvcDeletedNotifEnable }
            STATUS current
            DESCRIPTION 
                "The L2vpn SVC's Notification Control group."
            ::= { hwL2vpnSvcMIBGroups 4 }


        hwSvcStateChangeReasonGroup OBJECT-GROUP
            OBJECTS { hwSvcStateChangeReason }
            STATUS current
            DESCRIPTION 
                "The L2vpn's SVc State Reason group."
            ::= { hwL2vpnSvcMIBGroups 5 }


        hwSvcNotificationGroup NOTIFICATION-GROUP
            NOTIFICATIONS { hwSvcSwitchWtoP, hwSvcSwitchPtoW, hwSvcDown, hwSvcUp, hwSvcDeleted
                 }
            STATUS current
            DESCRIPTION 
                "The L2vpn's SVC Notification group."
            ::= { hwL2vpnSvcMIBGroups 6 }

        hwL2vpnPWTableMIBGroups OBJECT IDENTIFIER ::= { hwPwe3MIBConformance 4 }
       
        hwPWTableGroup OBJECT-GROUP
            OBJECTS { hwPWInterfaceIndex }
            STATUS current
            DESCRIPTION 
                "The PW Table Group."
            ::= { hwL2vpnPWTableMIBGroups 1 } 
            
        hwPWTemplateMIBGroups OBJECT IDENTIFIER ::= { hwPwe3MIBConformance 5 }
        
        hwPWTemplateNotificationGroup NOTIFICATION-GROUP
            NOTIFICATIONS { hwPWTemplateCannotDeleted }
            STATUS current
            DESCRIPTION 
                "The L2vpn's PW Template Notification group."
            ::= { hwPWTemplateMIBGroups 1 }
            
    END

--
-- HUAWEI-PWE3-MIB.mib
--