path: root/MIBS/huawei/HUAWEI-MULTICAST-MIB

-- ============================================================================
-- Copyright (C) by  HUAWEI TECHNOLOGIES. All rights reserved.
-- 
-- Description:  
-- Reference:  
-- Version: V1.0
-- History:
--    Modified by yuzhenjiang 60008725 2006-11-12
-- 
-- ============================================================================

HUAWEI-MULTICAST-MIB DEFINITIONS ::= BEGIN

IMPORTS 
    MODULE-IDENTITY,OBJECT-TYPE, 
    Counter32,Integer32,Unsigned32,IpAddress
        FROM SNMPv2-SMI

    TruthValue,TEXTUAL-CONVENTION,
    RowStatus,MacAddress,DisplayString
        FROM SNMPv2-TC

    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    
    InterfaceIndex,InterfaceIndexOrZero
        FROM IF-MIB
    
    hwL2VlanIndex,hwL2VlanDescr
        FROM HUAWEI-L2VLAN-MIB

    hwDatacomm
            FROM HUAWEI-MIB

    Ipv6Address, Ipv6IfIndexOrZero    
            FROM IPV6-TC;
    
hwMultiCastMIB MODULE-IDENTITY
    LAST-UPDATED "200508220000Z" 
    ORGANIZATION "Huawei Technologies co.,Ltd."
    CONTACT-INFO 
            " R&D BeiJing, Huawei Technologies co.,Ltd.
            Huawei Bld.,NO.3 Xinxi Rd., 
            Shang-Di Information Industry Base,
            Hai-Dian District Beijing P.R. China
            Zip:100085 
            Http://www.huawei.com                                       
            E-mail:support@huawei.com "
    DESCRIPTION 
        "The MIB module for IGMP Snooping feature. 

         Internet Group Management Protocol (IGMP) is the protocol used 
         by IPv4 end hosts to indicate their interest in receiving 
         multicast traffic for certain multicast groups to neighboring 
         multicast routers. 
         IGMP Snooping is a switch protocol. A switch that implements 
         IGMP Snooping listens to the IGMP messages exchanged between 
         the hosts and router, then provides selective transmission of 
         multicast traffic based on multicast mac destination address
         or multicast group address."      
    ::= { hwDatacomm 44 }

-- Textual Convention

EnabledStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A simple status value for the object."
    SYNTAX      INTEGER 
    { 
      enabled(1),
      disabled(2)
    }
 
VlanIndex ::= TEXTUAL-CONVENTION
   		STATUS current
		DESCRIPTION
			"A 12-bit VLAN ID used in the VLAN Tag header."
		SYNTAX INTEGER (1..4094)  

VlanIndexOrZero ::= TEXTUAL-CONVENTION
   		STATUS current
		DESCRIPTION
			"A 12-bit VLAN ID used in the VLAN Tag header.
			 0:all vlans"
		SYNTAX INTEGER (0|1..4094) 
		
PortFlag ::= TEXTUAL-CONVENTION
     STATUS  current
     DESCRIPTION 
        "type that port created:
	         none(0):not host port or not router port,       
	         dynamic(1) :  dynamic learn,
	         static(2) :  static config,
	         staticANDdynamic(3): dynamic and static"
     SYNTAX   INTEGER
     {   
         none(0),     
         dynamic(1),
         static(2),
         staticANDdynamic(3)
     }
            

 
hwIGSPMibObject   OBJECT IDENTIFIER ::= { hwMultiCastMIB 1 } 
                    


hwIGSPSystemInfo     
        OBJECT IDENTIFIER ::= { hwIGSPMibObject 1 }
hwVlanCfgInfo  
        OBJECT IDENTIFIER ::= { hwIGSPMibObject 2 } 
hwStatisticsInfo 
        OBJECT IDENTIFIER ::= { hwIGSPMibObject 3 }
hwMCGrpInfo
        OBJECT IDENTIFIER ::= { hwIGSPMibObject 4 }
hwPortInfo
        OBJECT IDENTIFIER ::= { hwIGSPMibObject 5 }



--
--  The hwSystemInfo group.
--


hwIgmpSnoopingEnabled OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether IGMP Snooping has been 
         enabled for the system."
    ::= { hwIGSPSystemInfo 1 }     

hwSsmPolicyAclNum OBJECT-TYPE
    SYNTAX       Integer32(-1|2000..2999)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  
        "The ACL Number which is used to limit the 
         ssm(specific source multicast) ip address scale
         2000: the minimum acl number
         2999: the maximum acl number
         -1: unvalid value "
    ::= { hwIGSPSystemInfo 2 }

hwSendQueryEnabled 		OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether send query function has been 
         enabled for the system."
    ::= { hwIGSPSystemInfo 3 } 

hwSendQuerySourceIpAddr OBJECT-TYPE
    SYNTAX       IpAddress  
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  
        "This object indicates sended IGMP query packet's source ip address.
		223.255.255.255: the maximum ip"
    ::= { hwIGSPSystemInfo  4}
    
hwSnmpTrapEnable    OBJECT-TYPE
    SYNTAX       EnabledStatus  
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  
        "This object indicates the SNMP trap switch is whether open or not."
    ::= { hwIGSPSystemInfo  5}

hwIgmpSnoopingSuppressionTime OBJECT-TYPE
    SYNTAX       Integer32(0..300)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  
        "This object indicates IGMP snooping suppression time, 
         range from integer 0 to 300, the default value is 10, 
         0 means not suppress IGMP packets. "
    ::= { hwIGSPSystemInfo  6}
    
hwIgmpProxyEnabled OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates whether IGMP Proxy has been enabled for system."
	::= { hwIGSPSystemInfo 7 }
	
hwIgmpSnoopingProxyEnabled OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates whether IGMP snooping proxy has been enabled for system."
	::= { hwIGSPSystemInfo 8 }
--
--  The hwVlanCfgInfo group.
--

hwVlanCfgTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWVlanCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains VLAN based configuration information
         for IGMP Snooping."
    ::= { hwVlanCfgInfo 1 }

hwVlanCfgEntry OBJECT-TYPE
    SYNTAX       HWVlanCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry is created for each active VLAN in the device 
         and deleted when the VLAN becomes inactive."
    INDEX { hwVlanIndex }
    ::= { hwVlanCfgTable 1 } 
     
HWVlanCfgEntry ::= SEQUENCE { 
    hwVlanIndex                VlanIndex,
    hwVlanIgmpSnoopingEnabled  EnabledStatus,
    hwVlanRouterAgingTime      Integer32,
    hwVlanMaxQueryRespTime     Integer32,
    hwVlanLastMemQueryInt      Integer32,
    hwVlanQueryInt             Integer32,
    hwVlanRobustCount          Integer32,
    hwVlanCheckRouterAlert     TruthValue,
    hwVlanSendRouterAlert      TruthValue,
    hwVlanIgmpVersion          INTEGER,  
    hwVlanPromptLeaveEnable    EnabledStatus,
    hwVlanPromptLeaveAclNum    Integer32, 
    hwVlanDropUnknown	       EnabledStatus,
    hwVlanLimitAction          EnabledStatus
    }
   
hwVlanIndex  OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the VLAN in which IGMP Snooping
         is configured."
        ::= { hwVlanCfgEntry 1 }

hwVlanIgmpSnoopingEnabled  OBJECT-TYPE
    SYNTAX          EnabledStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "When this object is set to 'enabled(1)' IGMP Snooping
        is enabled on this VLAN else disabled."
    ::= { hwVlanCfgEntry 2 } 
    
hwVlanRouterAgingTime  OBJECT-TYPE
   SYNTAX Integer32 (0..1000)
   MAX-ACCESS    read-write
   STATUS      current
   DESCRIPTION
              "Unit:second.
              Configure the aging time of the router port.
              0:180s or holdtime in hello"
    ::= {hwVlanCfgEntry 3}
   
hwVlanMaxQueryRespTime   OBJECT-TYPE
        SYNTAX  Integer32(1..25)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Unit:second.Configure the maximum query response time."
        ::= { hwVlanCfgEntry  4} 
        
hwVlanLastMemQueryInt   OBJECT-TYPE
        SYNTAX  Integer32(1..5)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Unit:second.Configure the last member query interval."
        ::= { hwVlanCfgEntry  5}
         
hwVlanQueryInt   OBJECT-TYPE
        SYNTAX  Integer32(1..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Unit:second.Configure the  query interval."
        ::= { hwVlanCfgEntry  6}       

hwVlanRobustCount OBJECT-TYPE
        SYNTAX  Integer32(2..5)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Configure the IGMP robust count."
        ::= { hwVlanCfgEntry  7} 
              
hwVlanCheckRouterAlert OBJECT-TYPE
        SYNTAX  TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        " When this object is set to 'true' ,Received IGMP messages
         must contain the IP Router Alert option in their IPheader.
         Ignore IGMP messages without Router Alert options ,and require 
         that routers not forward these messages."
        DEFVAL  {false}
        ::= { hwVlanCfgEntry  8} 
        
hwVlanSendRouterAlert OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS  current
        DESCRIPTION
        "When this object is set to 'true' ,Sended IGMP messages
         must contain the IP Router Alert option in their IPheader."
        DEFVAL {true} 
        ::= {hwVlanCfgEntry  9} 
 
hwVlanIgmpVersion OBJECT-TYPE
    SYNTAX          INTEGER {igmpV1(1), igmpV2(2), igmpV3(3)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The object indicates that igmp snooping 
        can handle the hightest IGMP version "
    ::= { hwVlanCfgEntry 10}

hwVlanPromptLeaveEnable OBJECT-TYPE
    SYNTAX          EnabledStatus     
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        " Prompt Leave Enable or disable"
    ::= { hwVlanCfgEntry 11}     
    
hwVlanPromptLeaveAclNum OBJECT-TYPE
    SYNTAX          Integer32 (-1|2000..3999)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The ACL Number which is used to limit the scope
         of prompt leave group 
         2000: the minimum acl number
         3999: the maximum acl number
         -1: unvalid value"                 
    ::= { hwVlanCfgEntry 12}       

hwVlanDropUnknown OBJECT-TYPE
    SYNTAX          EnabledStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "When this object is set to 'enabled(1)' Unknown stream 
        is droped on this VLAN else disabled."
    ::= { hwVlanCfgEntry 13}                           
    
    hwVlanLimitAction OBJECT-TYPE
    SYNTAX          EnabledStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "When this object is set to 'enabled(1)' table limit action on port."
    ::= { hwVlanCfgEntry 14}                           
 
 		hwVlanIgmpProxyTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwVlanIgmpProxyEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table contains VLAN based configuration information for IGMP Proxy."
			::= { hwVlanCfgInfo 2 }

		

		hwVlanIgmpProxyEntry OBJECT-TYPE
			SYNTAX HwVlanIgmpProxyEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"IGMP Proxy table entry."
			INDEX { hwVlanIgmpProxyIndex }
			::= { hwVlanIgmpProxyTable 1 }

		
		HwVlanIgmpProxyEntry ::=
			SEQUENCE { 
				hwVlanIgmpProxyIndex
					VlanIndex,
				hwVlanIgmpProxyEnabled
					EnabledStatus,
				hwVlanQueryInterval
					Integer32,
				hwVlanMaxResponseTime
					Integer32,
				hwVlanLastMemQueryInterval
					Integer32,
				hwVlanIgmpRouterAgingTime
					Integer32,
				hwVlanMaxIgmpVersion
					Integer32,
				hwVlanIgmpRobustCount
					Integer32,
				hwVlanRequireRouterAlert
					TruthValue,
				hwVlanIgmpSendRouterAlert
					TruthValue,
				hwVlanIgmpPromptLeaveEnable
					EnabledStatus
			 }

		hwVlanIgmpProxyIndex OBJECT-TYPE
			SYNTAX VlanIndex 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This object indicates the VLAN in which IGMP Proxy is configured."
			::= { hwVlanIgmpProxyEntry 1 }

		
		hwVlanIgmpProxyEnabled OBJECT-TYPE
			SYNTAX EnabledStatus
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"This object indicates enable or disable IGMP Proxy."
			DEFVAL { 2 }
			::= { hwVlanIgmpProxyEntry 2 }

		
		hwVlanQueryInterval OBJECT-TYPE
			SYNTAX Integer32 (0..1000)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"IGMP query interval."
			DEFVAL { 60 }
			::= { hwVlanIgmpProxyEntry 3 }

		
		hwVlanMaxResponseTime OBJECT-TYPE
			SYNTAX Integer32 (1..25)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Maximum query response time."
			DEFVAL { 10 }
			::= { hwVlanIgmpProxyEntry 4 }

		
		hwVlanLastMemQueryInterval OBJECT-TYPE
			SYNTAX Integer32 (1..5)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Last member query interval."
			DEFVAL { 1 }
			::= { hwVlanIgmpProxyEntry 5 }

		
		hwVlanIgmpRouterAgingTime OBJECT-TYPE
			SYNTAX Integer32 (1..1000)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Specify router port aging time."
			DEFVAL { 0 }
			::= { hwVlanIgmpProxyEntry 6 }

		
		hwVlanMaxIgmpVersion OBJECT-TYPE
			SYNTAX Integer32 (1..2)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Specify the highest IGMP version to deal, 1:IGMP V1, 2:IGMP v1 and IGMP v2."
			DEFVAL { 2 }
			::= { hwVlanIgmpProxyEntry 7 }

		
		hwVlanIgmpRobustCount OBJECT-TYPE
			SYNTAX Integer32 (2..5)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Robust coefficient."
			DEFVAL { 2 }
			::= { hwVlanIgmpProxyEntry 8 }

		
		hwVlanRequireRouterAlert OBJECT-TYPE
			SYNTAX TruthValue
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"When this object is set to 'true' ,Received IGMP messages
                 must contain the IP Router Alert option in their IPheader.
                 Ignore IGMP messages without Router Alert options ,and require 
                 that routers not forward these messages."
			DEFVAL { 1 }
			::= { hwVlanIgmpProxyEntry 9 }

		
		hwVlanIgmpSendRouterAlert OBJECT-TYPE
			SYNTAX TruthValue
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"When this object is set to 'true' ,Sended IGMP messages
                 must contain the IP Router Alert option in their Ipheader."
			DEFVAL { 1 }
			::= { hwVlanIgmpProxyEntry 10 }
		
		hwVlanIgmpPromptLeaveEnable OBJECT-TYPE
			SYNTAX EnabledStatus
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Indicates whether enable 'Quick leave'."
			DEFVAL { 2 }
			::= { hwVlanIgmpProxyEntry 11 }



		hwL2McastVlanCfgTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwL2McastVlanCfgEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table to config L2 multicast." 
			::= { hwVlanCfgInfo 3 }

		
		hwL2McastVlanCfgEntry OBJECT-TYPE
			SYNTAX HwL2McastVlanCfgEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This object indicates the VLAN in which Multicast is configured."
			INDEX { hwL2McastVlanIndex }
			::= { hwL2McastVlanCfgTable 1 }

		
		HwL2McastVlanCfgEntry ::=
			SEQUENCE { 
				hwL2McastVlanIndex
					VlanIndex,
				hwVlanL2FlowTriggerEnabled
					EnabledStatus,
				hwVlanL2StaticFlow
					IpAddress
			 }

		hwL2McastVlanIndex OBJECT-TYPE
			SYNTAX VlanIndex 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This object indicates the VLAN in which Multicast is configured."
			::= { hwL2McastVlanCfgEntry 1 }

		
		hwVlanL2FlowTriggerEnabled OBJECT-TYPE
			SYNTAX EnabledStatus
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"This object indicates whether flow trigger was enabled."
			DEFVAL { 2 }
			::= { hwL2McastVlanCfgEntry 2 }

		
		hwVlanL2StaticFlow OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"configure static flow."
			::= { hwL2McastVlanCfgEntry 3 }



                    
-- 
-- The hwStatisticsInfo group.
--          

-- hwStatisticsInfo
-- hwSystemStatisticsInfo
hwSystemStatisticsInfo OBJECT IDENTIFIER ::= { hwStatisticsInfo 1 }

hwSystemRecvVlanUpEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of vlan up event."
    ::= { hwSystemStatisticsInfo 1} 

hwSystemRecvVlanDownEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of vlan down event."
    ::= { hwSystemStatisticsInfo 2}   
 
hwSystemRecvVlanDelEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of vlan del event."
    ::= { hwSystemStatisticsInfo 3} 
  
hwSystemRecvPortUpEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port up event."
    ::= { hwSystemStatisticsInfo 4}
    
hwSystemRecvPortDownEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port down event."
    ::= { hwSystemStatisticsInfo 5}
    
hwSystemRecvPortDelEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port del event."
    ::= { hwSystemStatisticsInfo 6}    

hwSystemRecvPortIncEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port joined in vlan event."
    ::= { hwSystemStatisticsInfo 7}
         
hwSystemRecvPortExcEventTimes   OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port deleted from vlan event."
    ::= { hwSystemStatisticsInfo 8}

hwSystemRecvMSTPBlockEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of mstp port  from forwarding to 
        blocked event."
    ::= { hwSystemStatisticsInfo 9}

hwSystemRecvMSTPForwardEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of mstp port  from blocked to 
        forwarding event."
    ::= { hwSystemStatisticsInfo 10}
         
hwSystemIGMPSysClearStats        OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The configuration to clear the statistics of system statics"
    ::= { hwSystemStatisticsInfo 11}   
    
hwSystemIGMPPacketClearStats        OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The configuration to clear the statistics of all vlan IGMP packets"
    ::= { hwSystemStatisticsInfo 12}        

hwSystemRecvLinkChangeEventTimes        OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of link change event."
    ::= { hwSystemStatisticsInfo 13}

-- hwVlanStatisticsTable

hwVlanStatisticsTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwVlanStatisticsEntry 
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "."
    ::= { hwStatisticsInfo 2 }

hwVlanStatisticsEntry OBJECT-TYPE
    SYNTAX       HwVlanStatisticsEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "." 
    INDEX { hwVlanStatsVlanIndex } 
    ::= { hwVlanStatisticsTable 1 }
 
HwVlanStatisticsEntry::= SEQUENCE { 
    hwVlanStatsVlanIndex            VlanIndex,
    hwVlanRecvIGMPV1ReportNum       Counter32,
    hwVlanRecvIGMPV2ReportNum       Counter32,
    hwVlanRecvIGMPV3ReportNum       Counter32,
    hwVlanRecvIGMPLeaveNum          Counter32,
    hwVlanRecvIGMPV1QueryNum        Counter32,
    hwVlanRecvIGMPV2QueryNum        Counter32,
    hwVlanRecvIGMPV3QueryNum        Counter32,
    hwVlanRecvPimHelloNum           Counter32,
    hwVlanSendQueryNum              Counter32,
    hwVlanIGMPPacketClearStats      TruthValue,
    hwVlanSendSourceIPSpecQueryNum  Counter32
    }

hwVlanStatsVlanIndex         OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which IGMP Snooping
         counts packet.when clear statistics information,0 is 
         all Vlans."
    ::= { hwVlanStatisticsEntry 1 }

hwVlanRecvIGMPV1ReportNum   OBJECT-TYPE 
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of IGMP V1 report packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 2 }

hwVlanRecvIGMPV2ReportNum   OBJECT-TYPE 
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of IGMP V2 report packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 3 }

hwVlanRecvIGMPV3ReportNum   OBJECT-TYPE 
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of IGMP V3 report packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 4 }

hwVlanRecvIGMPLeaveNum      OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION 
        "The statistics of IGMP leave packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 5 }

hwVlanRecvIGMPV1QueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of IGMP V1 query packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 6 }

hwVlanRecvIGMPV2QueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of IGMP V2 query packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 7 }


hwVlanRecvIGMPV3QueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of IGMP V3 query packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 8 }
 
hwVlanRecvPimHelloNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of pim hello packets received on
 	the device."
    ::= { hwVlanStatisticsEntry 9}
    
hwVlanSendQueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of query packets sended on
 	the device."
    ::= { hwVlanStatisticsEntry 10}    
    
hwVlanIGMPPacketClearStats     OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Clear statistics information."
    ::= { hwVlanStatisticsEntry 11}
    
hwVlanSendSourceIPSpecQueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of source-ip-specific query packets sent from
 	the device."
    ::= { hwVlanStatisticsEntry 12} 
                                                      
                                                                                                                                      
-- 
--  The hwMCGrpInfo  group
-- 
 
hwIPGrpInfoTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWIPGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains multicast group exit port information through 
        multicast group address."
    ::= { hwMCGrpInfo 1 }

hwIPGrpInfoEntry OBJECT-TYPE
    SYNTAX       HWIPGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains exit port information for a specific Vlan
        or all Vlans." 
    INDEX { hwIPGrpVlanIndex,hwIPGrpPortIfIndex,hwIPGrpAddress} 
    ::= { hwIPGrpInfoTable 1 } 
    
HWIPGrpInfoEntry ::= SEQUENCE { 
    hwIPGrpVlanIndex           VlanIndex,    
    hwIPGrpPortIfIndex         InterfaceIndex, 
    hwIPGrpAddress             IpAddress,    
    hwIPGrpUpTime              Unsigned32,
    hwIPHostUpTime             Unsigned32,
    hwIPHostExpires            Unsigned32,
    hwIPHostFlags              PortFlag,
    hwIPRtUPTime               Unsigned32,
    hwIPRtExpires              Unsigned32,
    hwIPRtFlags                PortFlag
    }
   
hwIPGrpVlanIndex         OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which in which the group 
        is learned."
    ::= { hwIPGrpInfoEntry 1 } 
    
hwIPGrpPortIfIndex      OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates port name."
    ::= { hwIPGrpInfoEntry 2}  
    
hwIPGrpAddress          OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates IP multicast address learned by 
 	IGMP Snooping."
    ::= { hwIPGrpInfoEntry 3 }     
  
hwIPGrpUpTime         OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "This object indicates time that multicast group information created."
    ::= { hwIPGrpInfoEntry 4}
      
hwIPHostUpTime      OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "host port up time"
    ::= { hwIPGrpInfoEntry 5}
    
hwIPHostExpires     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "host port expire time"
    ::= { hwIPGrpInfoEntry 6} 
    
hwIPHostFlags      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "host port flag"
    ::= { hwIPGrpInfoEntry 7}
    
hwIPRtUPTime     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "router port up time"
    ::= { hwIPGrpInfoEntry 8}
    
hwIPRtExpires     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "router port expire time"
    ::= { hwIPGrpInfoEntry 9}
    
hwIPRtFlags      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "router port flag"
    ::= { hwIPGrpInfoEntry 10}
             
    
hwMACGrpInfoTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWMACGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains mac-group information."
    ::= { hwMCGrpInfo 2 }

hwMACGrpInfoEntry     OBJECT-TYPE
    SYNTAX       HWMACGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains mac-group information for a specific Vlan." 
    INDEX { hwMACGrpVlanIndex,hwMACGrpPortIfIndex,hwMACGrpAddress} 
    ::= { hwMACGrpInfoTable 1 }
    
HWMACGrpInfoEntry ::= SEQUENCE { 
    hwMACGrpVlanIndex    VlanIndex,
    hwMACGrpPortIfIndex  InterfaceIndex,
    hwMACGrpAddress      MacAddress
    }
 
hwMACGrpVlanIndex  OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which the group 
        is learned."
    ::= { hwMACGrpInfoEntry 1 }
hwMACGrpPortIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates port name ."
    ::= { hwMACGrpInfoEntry 2} 
 
hwMACGrpAddress   OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "This object indicates mac group address."
    ::= { hwMACGrpInfoEntry 3}  
    
		
		hwMcastGrpCfgTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwMcastGrpCfgEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table used to config multicast group."
			::= { hwMCGrpInfo 3 }

		
		hwMcastGrpCfgEntry OBJECT-TYPE
			SYNTAX HwMcastGrpCfgEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table entry."
			INDEX { hwGrpProfileNameIndex, hwGrpListNameIndex, hwGrpNameIndex  }
			::= { hwMcastGrpCfgTable 1 }

		
		HwMcastGrpCfgEntry ::=
			SEQUENCE { 
				hwGrpProfileNameIndex
					DisplayString,
				hwGrpListNameIndex
					DisplayString,
				hwGrpNameIndex 
					DisplayString,
				hwGrpIpAddress
					IpAddress, 
				hwGrpRowStatus
				    RowStatus
			 }

		hwGrpProfileNameIndex OBJECT-TYPE
			SYNTAX DisplayString 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Multicast profile name."
			::= { hwMcastGrpCfgEntry 1 }

		
		hwGrpListNameIndex OBJECT-TYPE
			SYNTAX DisplayString 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Multicast list name."
			::= { hwMcastGrpCfgEntry 2 }

		
		hwGrpNameIndex  OBJECT-TYPE
			SYNTAX DisplayString 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Multicast group name."
			::= { hwMcastGrpCfgEntry 3 }

		
		hwGrpIpAddress OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"Multicast group address."
			::= { hwMcastGrpCfgEntry 4 }  
			
		hwGrpRowStatus  OBJECT-TYPE
			SYNTAX RowStatus
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"This object is used to create or delete a row
                 and represent the current status of this row."
			::= { hwMcastGrpCfgEntry 100 }
					
		hwVlanMcastGrpTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwVlanMcastGrpEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table to apply a multicast profile on vlan."
			::= { hwMCGrpInfo 4 }

		
		hwVlanMcastGrpEntry OBJECT-TYPE
			SYNTAX HwVlanMcastGrpEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table entry."
			INDEX { hwVlanMcastIndex }
			::= { hwVlanMcastGrpTable 1 }

		
		HwVlanMcastGrpEntry ::=
			SEQUENCE { 
				hwVlanMcastIndex
					VlanIndex,
				hwVlanMcastProfileName
					DisplayString
			 }

		hwVlanMcastIndex OBJECT-TYPE
			SYNTAX VlanIndex 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This object indicates the VLAN in which 
				Multicast is configured."
			::= { hwVlanMcastGrpEntry 1 }

		
		hwVlanMcastProfileName OBJECT-TYPE
			SYNTAX DisplayString 
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Multicast profile name."
			::= { hwVlanMcastGrpEntry 2 }

		
		hwMcastGrpProfileTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwMcastGrpProfileEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table to config multicast profile."
			::= { hwMCGrpInfo 5 }

		
		hwMcastGrpProfileEntry OBJECT-TYPE
			SYNTAX HwMcastGrpProfileEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Table entry."
			INDEX { hwVlanMulticastProfileName }
			::= { hwMcastGrpProfileTable 1 }

		
		HwMcastGrpProfileEntry ::=
			SEQUENCE { 
				hwVlanMulticastProfileName
					DisplayString,
				hwMulticastProfilePreviewTimes
					Integer32,
				hwMulticastProfilePreviewMinutes
					Integer32,
				hwMulticastProfilePreviewInterval
					Integer32
			 }

		hwVlanMulticastProfileName OBJECT-TYPE
			SYNTAX DisplayString 
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Multicast profile name."
			::= { hwMcastGrpProfileEntry 1 }

		
		hwMulticastProfilePreviewTimes OBJECT-TYPE
			SYNTAX Integer32 (1..100)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Multicast profile preview times."
			DEFVAL { 10 }
			::= { hwMcastGrpProfileEntry 2 }

		
		hwMulticastProfilePreviewMinutes OBJECT-TYPE
			SYNTAX Integer32 (1..30)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Multicast profile preview minutes."
			DEFVAL { 10 }
			::= { hwMcastGrpProfileEntry 3 }

		
		hwMulticastProfilePreviewInterval OBJECT-TYPE
			SYNTAX Integer32 (1..30)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Multicast profile preview interval."
			DEFVAL { 10 }
			::= { hwMcastGrpProfileEntry 4 }

--
--  hwExternIpGrpInfoTable
--

hwExternIpGrpInfoTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwExternIpGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains multicast group exit port information through 
        multicast group address."
    ::= { hwMCGrpInfo 6 }

hwExternIpGrpInfoEntry OBJECT-TYPE
    SYNTAX       HwExternIpGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains exit port information for a specific VLAN 
        or all VLANs." 
    INDEX { hwExternIpGrpVlanIndex,hwExternIpGrpPortIfIndex,hwExternIpGrpAddress,hwExternIpSourceAddress} 
    ::= { hwExternIpGrpInfoTable 1 } 
    
HwExternIpGrpInfoEntry ::= SEQUENCE { 
    hwExternIpGrpVlanIndex           VlanIndex,    
    hwExternIpGrpPortIfIndex         InterfaceIndex, 
    hwExternIpGrpAddress             IpAddress,    
    hwExternIpGrpUpTime              Unsigned32,
    hwExternIpHostUpTime             Unsigned32,
    hwExternIpHostExpires            Unsigned32,
    hwExternIpHostFlag               PortFlag,
    hwExternIpRtUpTime               Unsigned32,
    hwExternIpRtExpires              Unsigned32,
    hwExternIpRtFlag                 PortFlag,
    hwExternIpSourceAddress          IpAddress
    }
   
hwExternIpGrpVlanIndex         OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which in which the group 
        is learned."
    ::= { hwExternIpGrpInfoEntry 1 } 
    
hwExternIpGrpPortIfIndex      OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates port name."
    ::= { hwExternIpGrpInfoEntry 2}  
    
hwExternIpGrpAddress          OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates IP multicast address learned by 
 	IGMP snooping."
    ::= { hwExternIpGrpInfoEntry 3 }     
  
hwExternIpGrpUpTime         OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "This object indicates time that multicast group information created."
    ::= { hwExternIpGrpInfoEntry 4}
      
hwExternIpHostUpTime      OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Host port up time."
    ::= { hwExternIpGrpInfoEntry 5}
    
hwExternIpHostExpires     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Host port expire time."
    ::= { hwExternIpGrpInfoEntry 6} 
    
hwExternIpHostFlag      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Host port flag."
    ::= { hwExternIpGrpInfoEntry 7}
    
hwExternIpRtUpTime     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Router port up time."
    ::= { hwExternIpGrpInfoEntry 8}
    
hwExternIpRtExpires     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Router port expire time."
    ::= { hwExternIpGrpInfoEntry 9}
    
hwExternIpRtFlag      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Router port flag."
    ::= { hwExternIpGrpInfoEntry 10}		     

hwExternIpSourceAddress          OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates IP source address learned by 
  IGMP snooping."
    ::= { hwExternIpGrpInfoEntry 11 } 
       
-- 
-- The hwPortInfo group.
-- 

hwPortStaticGrpTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWPortStaticGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains port config information."
    ::= { hwPortInfo 1}

hwPortStaticGrpEntry     OBJECT-TYPE
    SYNTAX       HWPortStaticGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains port config information." 
    INDEX { hwPortStaticGrpVlanIndex,hwPortStaticGrpIfIndex,hwPortStaticGrpAddr} 
    ::= { hwPortStaticGrpTable 1 }
    
HWPortStaticGrpEntry ::= SEQUENCE { 
    hwPortStaticGrpVlanIndex          VlanIndex,
    hwPortStaticGrpIfIndex            InterfaceIndex, 
    hwPortStaticGrpAddr               IpAddress,
    hwPortStaticGrpRowStatus          RowStatus   
    }
 
hwPortStaticGrpVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which VLAN is configed."
    ::= { hwPortStaticGrpEntry 1 }
  
hwPortStaticGrpIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the interface in which port is configed."
    ::= { hwPortStaticGrpEntry 2 }
      
hwPortStaticGrpAddr   OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates static join multicast group address."
    ::= { hwPortStaticGrpEntry  3}
 
hwPortStaticGrpRowStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is used to create or delete a row
 	and represent the current status of this row.
 	Now support state:CreateAndGo,Destroy."
    ::= { hwPortStaticGrpEntry 100}      

 
hwGrpPolicyCfgTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWGrpPolicyCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains group policy config information."
    ::= { hwPortInfo 2}

  hwGrpPolicyCfgEntry     OBJECT-TYPE
    SYNTAX       HWGrpPolicyCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains group policy config information." 
    INDEX {hwGrpPolicyVlanIndex}  
    ::= { hwGrpPolicyCfgTable 1 }
    
 HWGrpPolicyCfgEntry ::= SEQUENCE { 
    hwGrpPolicyVlanIndex          VlanIndex, 
    hwGrpPolicyAclNum             Integer32,
    hwGrpPolicyIgmpVersion        INTEGER,
    hwGrpPolicyRowStatus          RowStatus
    }
    
 hwGrpPolicyVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "The Vlan ID which group policy config."
    ::= { hwGrpPolicyCfgEntry 1 }
     
 hwGrpPolicyAclNum    OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The ACL Number which is used as the group policy parameter."
    ::= { hwGrpPolicyCfgEntry 2 }
 
 hwGrpPolicyIgmpVersion    OBJECT-TYPE
    SYNTAX       INTEGER {igmpV1(1), igmpV2(2), igmpV1V2(3), igmpV3(4), igmpV1V2V3(5)}
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object indicates the IGMP version for the group policy."
    ::= { hwGrpPolicyCfgEntry 3 }
      
hwGrpPolicyRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
 	and represent the current status of this row.
 	Now support three state:CreateAndGo,Active,Destroy."
    ::= { hwGrpPolicyCfgEntry 100}
      

hwRouterPortInfoTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWRouterPortInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        " Table containsrouter port infromation in specify vlan"
    ::= { hwPortInfo 3}

  hwRouterPortInfoEntry     OBJECT-TYPE
    SYNTAX       HWRouterPortInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "a entry contains port infromation in specify vlan" 
    INDEX {hwRouterPortVlanIndex,hwRouterPortIfIndex} 
    ::= { hwRouterPortInfoTable 1 }
    
 HWRouterPortInfoEntry ::= SEQUENCE { 
    hwRouterPortVlanIndex       VlanIndex,
    hwRouterPortIfIndex         InterfaceIndex,
    hwRouterPortUpTime          Unsigned32,
    hwRouterPortExpires         Unsigned32, 
    hwRouterPortFlags           PortFlag
    }
    
 hwRouterPortVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "vlan id"
    ::= { hwRouterPortInfoEntry 1 }
  
 hwRouterPortIfIndex    OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "router port name in specify vlan"
    ::= { hwRouterPortInfoEntry 2 } 
 
 hwRouterPortUpTime    OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "router port up time"
    ::= { hwRouterPortInfoEntry 3 }
      
hwRouterPortExpires    OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "router port expire time"
    ::= { hwRouterPortInfoEntry 4}

hwRouterPortFlags      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "router port flag"
    ::= { hwRouterPortInfoEntry 5}
 
hwRouterPortCfgTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWRouterPortCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains router port config information."
    ::= { hwPortInfo 4}

 hwRouterPortCfgEntry     OBJECT-TYPE
    SYNTAX       HWRouterPortCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains router port config information." 
    INDEX { hwRouterPortCfgVlanIndex,hwRouterPortCfgIfIndex} 
    ::= { hwRouterPortCfgTable 1 }
    
 HWRouterPortCfgEntry ::= SEQUENCE { 
    hwRouterPortCfgVlanIndex          VlanIndex,
    hwRouterPortCfgIfIndex            InterfaceIndex, 
    hwRouterPortCfgRowStatus       RowStatus
    }
 
 hwRouterPortCfgVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which VLAN is configed."
    ::= { hwRouterPortCfgEntry 1 }
  
 hwRouterPortCfgIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the interface which port is configed."
    ::= { hwRouterPortCfgEntry 2 }
          
hwRouterPortCfgRowStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is used to create or delete a row
 	and represent the current status of this row."
    ::= { hwRouterPortCfgEntry 100}
    
hwPortLimitTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWPortLimitEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table contains IGMP Snooping entry count limit 
    information on a port."
    ::= { hwPortInfo 5}

  hwPortLimitEntry     OBJECT-TYPE
    SYNTAX       HWPortLimitEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains IGMP Snooping entry count limit 
    information on a port." 
    INDEX {hwPortLimitIfIndex} 
    ::= { hwPortLimitTable 1 }
    
 HWPortLimitEntry ::= SEQUENCE {
    hwPortLimitIfIndex               InterfaceIndex,
    hwPortLimitNumber                 Integer32,
    hwPortLimitRowStatus        RowStatus
    }
    
 hwPortLimitIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "Index of the interface."
    ::= { hwPortLimitEntry 1 }
  
 hwPortLimitNumber    OBJECT-TYPE
    SYNTAX       Integer32 
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The maximum number of IGMP-Snooping entries
    can be configured or learned."
    ::= { hwPortLimitEntry 2 } 
 
 hwPortLimitRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
 	and represent the current status of this row."
    ::= { hwPortLimitEntry 100 }

hwPortGroupPolicyTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwPortGroupPolicyEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table contains group policy config information in port."
    ::= { hwPortInfo 6}

  hwPortGroupPolicyEntry     OBJECT-TYPE
    SYNTAX       HwPortGroupPolicyEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains group policy config information in port." 
    INDEX {hwPortGroupPolicyIfIndex, hwPortGroupPolicyVlanIndex} 
    ::= { hwPortGroupPolicyTable 1 }
    
 HwPortGroupPolicyEntry ::= SEQUENCE {
    hwPortGroupPolicyIfIndex               InterfaceIndex,
    hwPortGroupPolicyAclNumber                 Integer32,
    hwPortGroupPolicyVlanIndex              VlanIndex,
    hwPortGroupPolicyVersion                  INTEGER,
    hwPortGroupPolicyRowStatus        RowStatus
    }
    
 hwPortGroupPolicyIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "Index of the interface."
    ::= { hwPortGroupPolicyEntry 1 }
  
 hwPortGroupPolicyAclNumber    OBJECT-TYPE
    SYNTAX       Integer32 (-1|2000..3999)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The ACL number which is used as the group policy parameter."
    ::= { hwPortGroupPolicyEntry 2 } 

 hwPortGroupPolicyVlanIndex    OBJECT-TYPE
    SYNTAX       VlanIndex 
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "The vlan ID which group policy config."
    ::= { hwPortGroupPolicyEntry 3 }

 hwPortGroupPolicyVersion    OBJECT-TYPE
    SYNTAX       INTEGER  {igmpV1(1), igmpV2(2), igmpV1V2(3), igmpV3(4), igmpV1V2V3(5)}
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object indicates the IGMP version for the group policy."
    ::= { hwPortGroupPolicyEntry 4 }
    
 hwPortGroupPolicyRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
  and represent the current status of this row.
  Now support three state:CreateAndGo,Active,Destroy."
    ::= { hwPortGroupPolicyEntry 51 }

--
--   hwExternPortStaticGrpTable
--

hwExternPortStaticGrpTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwExternPortStaticGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains port config information."
    ::= { hwPortInfo 7}

hwExternPortStaticGrpEntry     OBJECT-TYPE
    SYNTAX       HwExternPortStaticGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains port config information." 
    INDEX { hwExternPortStaticGrpVlanIndex,hwExternPortStaticGrpIfIndex,hwExternPortStaticGroupAddr,hwExternPortStaticSourceAddr} 
    ::= { hwExternPortStaticGrpTable 1 }
    
HwExternPortStaticGrpEntry ::= SEQUENCE { 
    hwExternPortStaticGrpVlanIndex          VlanIndex,
    hwExternPortStaticGrpIfIndex            InterfaceIndex, 
    hwExternPortStaticGroupAddr             IpAddress,
    hwExternPortStaticSourceAddr            IpAddress,
    hwExternPortStaticGrpRowStatus          RowStatus   
    }
 
hwExternPortStaticGrpVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which VLAN is configed."
    ::= { hwExternPortStaticGrpEntry 1 }
  
hwExternPortStaticGrpIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the interface in which port is configed."
    ::= { hwExternPortStaticGrpEntry 2 }
      
hwExternPortStaticGroupAddr   OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates static join multicast group address."
    ::= { hwExternPortStaticGrpEntry 3 }

hwExternPortStaticSourceAddr   OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates static join multicast source address."
    ::= { hwExternPortStaticGrpEntry 4 }
 
hwExternPortStaticGrpRowStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is used to create or delete a row
 	and represent the current status of this row.
 	Now support state:CreateAndGo,Destroy."
    ::= { hwExternPortStaticGrpEntry 51 } 

--
--  hwPortVlanLimitTable
--                      

hwPortVlanLimitTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwPortVlanLimitEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table contains IGMP snooping entry count limit 
    information on a port."
    ::= { hwPortInfo 8}

  hwPortVlanLimitEntry     OBJECT-TYPE
    SYNTAX       HwPortVlanLimitEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains IGMP snooping entry count limit 
    information on a port." 
    INDEX {hwPortVlanLimitIfIndex,hwPortVlanLimitVlanIndex} 
    ::= { hwPortVlanLimitTable 1 }
    
 HwPortVlanLimitEntry ::= SEQUENCE {
    hwPortVlanLimitIfIndex               InterfaceIndex,
    hwPortVlanLimitNumber                 Integer32,
    hwPortVlanLimitVlanIndex              VlanIndex,
    hwPortVlanLimitRowStatus              RowStatus
    }
    
 hwPortVlanLimitIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "Index of the interface."
    ::= { hwPortVlanLimitEntry 1 }
  
 hwPortVlanLimitNumber    OBJECT-TYPE
    SYNTAX       Integer32 
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The maximum number of IGMP snooping entries
    can be configured or learned."
    ::= { hwPortVlanLimitEntry 2 } 

 hwPortVlanLimitVlanIndex    OBJECT-TYPE
    SYNTAX       VlanIndex 
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "The maximum number of IGMP snooping entries
    can be configured or learned."
    ::= { hwPortVlanLimitEntry 3 }
 
 hwPortVlanLimitRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
 	and represent the current status of this row."
    ::= { hwPortVlanLimitEntry 51 }
    
-- 
--             MLD SNOOPING    
-- 

hwMldSnpgMibObject   OBJECT IDENTIFIER ::= { hwMultiCastMIB 2 } 
                    


hwMldSnpgSystemInfo     
        OBJECT IDENTIFIER ::= { hwMldSnpgMibObject 1 }
hwMldVlanCfgInfo  
        OBJECT IDENTIFIER ::= { hwMldSnpgMibObject 2 } 
hwMldStatisticsInfo 
        OBJECT IDENTIFIER ::= { hwMldSnpgMibObject 3 }
hwMldMCGrpInfo
        OBJECT IDENTIFIER ::= { hwMldSnpgMibObject 4 }
hwMldPortInfo
        OBJECT IDENTIFIER ::= { hwMldSnpgMibObject 5 }



--
--  The hwMldSnpgSystemInfo group.
--


hwMldSnoopingEnabled OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether MLD snooping has been 
         enabled for the system."
    ::= { hwMldSnpgSystemInfo 1 }     

hwMldSendQueryEnabled 		OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether send query function has been enabled for the system."
    ::= { hwMldSnpgSystemInfo 2 } 

hwMldSendQuerySourceIpAddr OBJECT-TYPE
    SYNTAX       Ipv6Address  
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  
        "This object indicates sended MLD query packet's source IP address."
    ::= { hwMldSnpgSystemInfo  3}
    
hwMldSnoopingSuppressionTime OBJECT-TYPE
    SYNTAX       Integer32(0..300)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION  
        "This object indicates MLD snooping suppression time, 
         range from integer 0 to 300, the default value is 10, 
         0 means not suppress MLD packets. "
    ::= { hwMldSnpgSystemInfo  4}
    
--
--  The hwMldVlanCfgInfo group.
--

hwMldVlanCfgTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldVlanCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains VLAN based configuration information 
        for MLD snooping."
    ::= { hwMldVlanCfgInfo 1 }

hwMldVlanCfgEntry OBJECT-TYPE
    SYNTAX       HwMldVlanCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry is created for each active VLAN in the device 
         and deleted when the VLAN becomes inactive."
    INDEX { hwMldVlanIndex }
    ::= { hwMldVlanCfgTable 1 } 
     
HwMldVlanCfgEntry ::= SEQUENCE { 
    hwMldVlanIndex                VlanIndex,
    hwVlanMldSnoopingEnabled  EnabledStatus,
    hwMldVlanRouterAgingTime      Integer32,
    hwMldVlanMaxQueryRespTime     Integer32,
    hwMldVlanLastListenerQueryInt      Integer32,
    hwMldVlanQueryInt             Integer32,
    hwMldVlanRobustCount          Integer32,
    hwMldVlanCheckRouterAlert     TruthValue,
    hwMldVlanSendRouterAlert      TruthValue,
    hwVlanMldVersion          INTEGER,  
    hwMldVlanPromptLeaveEnable    EnabledStatus,
    hwMldVlanPromptLeaveAclNum    Integer32, 
    hwMldVlanDropUnknown	       EnabledStatus
    }
   
hwMldVlanIndex  OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the VLAN in which MLD snooping
         is configured."
        ::= { hwMldVlanCfgEntry 1 }

hwVlanMldSnoopingEnabled  OBJECT-TYPE
    SYNTAX          EnabledStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "When this object is set to 'enabled(1)' MLD snooping
        is enabled on this VLAN else disabled."
    ::= { hwMldVlanCfgEntry 2 } 
    
hwMldVlanRouterAgingTime  OBJECT-TYPE
   SYNTAX Integer32 (0..1000)
   MAX-ACCESS    read-write
   STATUS      current
   DESCRIPTION
              "Unit:second.
              Configure the aging time of the router port.
              0:180s or holdtime in hello."
    ::= {hwMldVlanCfgEntry 3}
   
hwMldVlanMaxQueryRespTime   OBJECT-TYPE
        SYNTAX  Integer32(1..25)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Unit:second. Configure the maximum query response time."
        ::= { hwMldVlanCfgEntry  4} 
        
hwMldVlanLastListenerQueryInt   OBJECT-TYPE
        SYNTAX  Integer32(1..5)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Unit:second. Configure the last listener query interval."
        ::= { hwMldVlanCfgEntry  5}
         
hwMldVlanQueryInt   OBJECT-TYPE
        SYNTAX  Integer32(1..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Unit:second. Configure the  query interval."
        ::= { hwMldVlanCfgEntry  6}       

hwMldVlanRobustCount OBJECT-TYPE
        SYNTAX  Integer32(2..5)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        "Configure the MLD robust count."
        ::= { hwMldVlanCfgEntry  7} 
              
hwMldVlanCheckRouterAlert OBJECT-TYPE
        SYNTAX  TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION 
        " When this object is set to 'true', received MLD messages
         must contain the IP router alert option in their IP header.
         Ignore MLD messages without router alert options ,and require 
         that routers not forward these messages."
        DEFVAL  {false}
        ::= { hwMldVlanCfgEntry  8} 
        
hwMldVlanSendRouterAlert OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS  current
        DESCRIPTION
        "When this object is set to 'true', sended MLD messages
         must contain the IP router alert option in their IP header."
        DEFVAL {true} 
        ::= {hwMldVlanCfgEntry  9} 
 
hwVlanMldVersion OBJECT-TYPE
    SYNTAX          INTEGER {mldV1(1), mldV2(2)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The object indicates that MLD snooping 
        can handle the hightest MLD version. "
    ::= { hwMldVlanCfgEntry 10}

hwMldVlanPromptLeaveEnable OBJECT-TYPE
    SYNTAX          EnabledStatus     
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        " Prompt leave enable(1) or disable(2)."
    ::= { hwMldVlanCfgEntry 11}     
    
hwMldVlanPromptLeaveAclNum OBJECT-TYPE
    SYNTAX          Integer32 (-1|2000..3999)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The ACL number which is used to limit the scope
         of prompt leave group.
         2000: the minimum ACL number
         3999: the maximum ACL number
         -1: unvalid value"                 
    ::= { hwMldVlanCfgEntry 12}       

hwMldVlanDropUnknown OBJECT-TYPE
    SYNTAX          EnabledStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "When this object is set to 'enabled(1)' unknown stream 
        is droped on this VLAN else disabled."
    ::= { hwMldVlanCfgEntry 13}                           
 
                   
-- 
-- The hwMldStatisticsInfo group.
--          

-- hwMldStatisticsInfo
-- hwMldSystemStatisticsInfo
hwMldSystemStatisticsInfo OBJECT IDENTIFIER ::= { hwMldStatisticsInfo 1 }

hwMldSystemRecvVlanUpEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of vlan up event."
    ::= { hwMldSystemStatisticsInfo 1} 

hwMldSystemRecvVlanDownEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of vlan down event."
    ::= { hwMldSystemStatisticsInfo 2}   
 
hwMldSystemRecvVlanDelEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of vlan delete event."
    ::= { hwMldSystemStatisticsInfo 3} 
  
hwMldSystemRecvPortUpEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port up event."
    ::= { hwMldSystemStatisticsInfo 4}
    
hwMldSystemRecvPortDownEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port down event."
    ::= { hwMldSystemStatisticsInfo 5}
    
hwMldSystemRecvPortDelEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port delete event."
    ::= { hwMldSystemStatisticsInfo 6}    

hwMldSystemRecvPortIncEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port joined in vlan event."
    ::= { hwMldSystemStatisticsInfo 7}
         
hwMldSystemRecvPortExcEventTimes   OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of port deleted from vlan event."
    ::= { hwMldSystemStatisticsInfo 8}

hwMldSystemRecvMstpBlockEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of MSTP port  from forwarding to 
        blocked event."
    ::= { hwMldSystemStatisticsInfo 9}

hwMldSystemRecvMstpForwardEventTimes OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of MSTP port  from blocked to 
        forwarding event."
    ::= { hwMldSystemStatisticsInfo 10}
         
hwMldSystemSysClearStats        OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The configuration to clear the statistics of system statics."
    ::= { hwMldSystemStatisticsInfo 11}   
    
hwMldSystemPacketClearStats        OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The configuration to clear the statistics of all vlan MLD packets."
    ::= { hwMldSystemStatisticsInfo 12}        

hwMldSystemRecvLinkChangeEventTimes        OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of link change event."
    ::= { hwMldSystemStatisticsInfo 13}

-- hwMldVlanStatisticsTable

hwMldVlanStatisticsTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldVlanStatisticsEntry 
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains MLD VLAN statistics."
    ::= { hwMldStatisticsInfo 2 }

hwMldVlanStatisticsEntry OBJECT-TYPE
    SYNTAX       HwMldVlanStatisticsEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains MLD VLAN statistics." 
    INDEX { hwMldVlanStatsVlanIndex } 
    ::= { hwMldVlanStatisticsTable 1 }
 
HwMldVlanStatisticsEntry::= SEQUENCE { 
    hwMldVlanStatsVlanIndex            VlanIndex,
    hwVlanRecvMldV1ReportNum       Counter32,
    hwVlanRecvMldV2ReportNum       Counter32,
    hwVlanRecvMldDoneNum          Counter32,
    hwVlanRecvMldV1QueryNum        Counter32,
    hwVlanRecvMldV2QueryNum        Counter32,
    hwVlanRecvIpv6PimHelloNum           Counter32,
    hwVlanSendMldQueryNum              Counter32,
    hwVlanMldPacketClearStats      TruthValue,
    hwVlanSendSourceIpSpecMldQueryNum  Counter32
    }

hwMldVlanStatsVlanIndex         OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which MLD snooping
         counts packet.When clear statistics information,0 is 
         all vlans."
    ::= { hwMldVlanStatisticsEntry 1 }

hwVlanRecvMldV1ReportNum   OBJECT-TYPE 
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of MLD V1 report packets received on
 	the device."
    ::= { hwMldVlanStatisticsEntry 2 }

hwVlanRecvMldV2ReportNum   OBJECT-TYPE 
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of MLD V2 report packets received on
 	the device."
    ::= { hwMldVlanStatisticsEntry 3 }

hwVlanRecvMldDoneNum      OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION 
        "The statistics of MLD leave packets received on
 	the device."
    ::= { hwMldVlanStatisticsEntry 4 }

hwVlanRecvMldV1QueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of MLD V1 query packets received on
 	the device."
    ::= { hwMldVlanStatisticsEntry 5 }

hwVlanRecvMldV2QueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of MLD V2 query packets received on
 	the device."
    ::= { hwMldVlanStatisticsEntry 6 }

 
hwVlanRecvIpv6PimHelloNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of PIM hello packets received on
 	the device."
    ::= { hwMldVlanStatisticsEntry 7}
    
hwVlanSendMldQueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The statistics of query packets sended on
 	the device."
    ::= { hwMldVlanStatisticsEntry 8}    
    
hwVlanMldPacketClearStats     OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Clear statistics information."
    ::= { hwMldVlanStatisticsEntry 9}
    
hwVlanSendSourceIpSpecMldQueryNum     OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Count of query packets with the specified source IPv6 address."
    ::= { hwMldVlanStatisticsEntry 10} 
                                                      
                                                                                                                                      
-- 
--  The hwMldMCGrpInfo   group
-- 
 
hwMldIpGrpInfoTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldIpGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains multicast group exit port information through 
        multicast group address."
    ::= { hwMldMCGrpInfo  1 }

hwMldIpGrpInfoEntry OBJECT-TYPE
    SYNTAX       HwMldIpGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains exit port information for a specific vlan
        or all vlans." 
    INDEX { hwMldIpGrpVlanIndex,hwMldIpGrpPortIfIndex,hwMldIpGrpAddress,hwMldIpSourceAddress} 
    ::= { hwMldIpGrpInfoTable 1 } 
    
HwMldIpGrpInfoEntry ::= SEQUENCE { 
    hwMldIpGrpVlanIndex           VlanIndex,    
    hwMldIpGrpPortIfIndex         InterfaceIndex, 
    hwMldIpGrpAddress             Ipv6Address,    
    hwMldIpGrpUpTime              Unsigned32,
    hwMldIpHostUpTime             Unsigned32,
    hwMldIpHostExpires            Unsigned32,
    hwMldIpHostFlag              PortFlag,
    hwMldIpRtUpTime               Unsigned32,
    hwMldIpRtExpires              Unsigned32,
    hwMldIpRtFlag                PortFlag,
    hwMldIpSourceAddress          Ipv6Address
    }
   
hwMldIpGrpVlanIndex         OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which in which the group 
        is learned."
    ::= { hwMldIpGrpInfoEntry 1 } 
    
hwMldIpGrpPortIfIndex      OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates port name."
    ::= { hwMldIpGrpInfoEntry 2}  
    
hwMldIpGrpAddress          OBJECT-TYPE
    SYNTAX       Ipv6Address
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates IP multicast address learned by 
 	MLD snooping."
    ::= { hwMldIpGrpInfoEntry 3 }     
  
hwMldIpGrpUpTime         OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "This object indicates time that multicast group information created."
    ::= { hwMldIpGrpInfoEntry 4}
      
hwMldIpHostUpTime      OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Time for the host port remaining in the up state."
    ::= { hwMldIpGrpInfoEntry 5}
    
hwMldIpHostExpires     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Time for the host port expires."
    ::= { hwMldIpGrpInfoEntry 6} 
    
hwMldIpHostFlag      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Host port flag."
    ::= { hwMldIpGrpInfoEntry 7}
    
hwMldIpRtUpTime     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Time for the router port remaining in the up state."
    ::= { hwMldIpGrpInfoEntry 8}
    
hwMldIpRtExpires     OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Time for the router port expires."
    ::= { hwMldIpGrpInfoEntry 9}
    
hwMldIpRtFlag      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Router port flag."
    ::= { hwMldIpGrpInfoEntry 10}

hwMldIpSourceAddress          OBJECT-TYPE
    SYNTAX       Ipv6Address
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates IP source address learned by 
 	MLD snooping."
    ::= { hwMldIpGrpInfoEntry 11 }                    
-- 
-- The hwMldPortInfo group.
-- 

hwMldPortStaticGrpTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldPortStaticGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains port config information."
    ::= { hwMldPortInfo 1}

hwMldPortStaticGrpEntry     OBJECT-TYPE
    SYNTAX       HwMldPortStaticGrpEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains port config information." 
    INDEX { hwMldPortStaticGrpVlanIndex,hwMldPortStaticGrpIfIndex,hwMldPortStaticGrpAddr,hwMldPortStaticSourceAddr} 
    ::= { hwMldPortStaticGrpTable 1 }
    
HwMldPortStaticGrpEntry ::= SEQUENCE { 
    hwMldPortStaticGrpVlanIndex          VlanIndex,
    hwMldPortStaticGrpIfIndex            InterfaceIndex, 
    hwMldPortStaticGrpAddr               Ipv6Address,
    hwMldPortStaticSourceAddr            Ipv6Address,
    hwMldPortStaticGrpRowStatus          RowStatus   
    }
 
hwMldPortStaticGrpVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which VLAN is configed."
    ::= { hwMldPortStaticGrpEntry 1 }
  
hwMldPortStaticGrpIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the interface in which port is configed."
    ::= { hwMldPortStaticGrpEntry 2 }
      
hwMldPortStaticGrpAddr   OBJECT-TYPE
    SYNTAX       Ipv6Address
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates static join multicast group address."
    ::= { hwMldPortStaticGrpEntry  3}

hwMldPortStaticSourceAddr   OBJECT-TYPE
    SYNTAX       Ipv6Address
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates static join multicast source address."
    ::= { hwMldPortStaticGrpEntry  4}
 
hwMldPortStaticGrpRowStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is used to create or delete a row
 	and represent the current status of this row.
 	Now support state:CreateAndGo,Destroy."
    ::= { hwMldPortStaticGrpEntry 51}      

 
hwMldGrpPolicyCfgTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldGrpPolicyCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains group policy config information."
    ::= { hwMldPortInfo 2}

  hwMldGrpPolicyCfgEntry     OBJECT-TYPE
    SYNTAX       HwMldGrpPolicyCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains group policy config information." 
    INDEX {hwMldGrpPolicyVlanIndex}  
    ::= { hwMldGrpPolicyCfgTable 1 }
    
 HwMldGrpPolicyCfgEntry ::= SEQUENCE { 
    hwMldGrpPolicyVlanIndex          VlanIndex, 
    hwMldGrpPolicyAclNum             Integer32,
    hwGrpPolicyMldVersion            INTEGER,
    hwMldGrpPolicyRowStatus          RowStatus
    }
    
 hwMldGrpPolicyVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "The vlan ID which group policy config."
    ::= { hwMldGrpPolicyCfgEntry 1 }
     
 hwMldGrpPolicyAclNum    OBJECT-TYPE
    SYNTAX       Integer32 (-1|2000..3999)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The ACL number which is used as the group policy parameter."
    ::= { hwMldGrpPolicyCfgEntry 2 }
 
 hwGrpPolicyMldVersion    OBJECT-TYPE
    SYNTAX       INTEGER {mldV1(1), mldV2(2), mldV1V2(3)}
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object indicates the MLD version for the group policy."
    ::= { hwMldGrpPolicyCfgEntry 3 }
      
hwMldGrpPolicyRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
 	and represent the current status of this row.
 	Now support three state:CreateAndGo,Active,Destroy."
    ::= { hwMldGrpPolicyCfgEntry 51}
      

hwMldRouterPortInfoTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldRouterPortInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        " Table containsrouter port infromation in specify vlan."
    ::= { hwMldPortInfo 3}

  hwMldRouterPortInfoEntry     OBJECT-TYPE
    SYNTAX       HwMldRouterPortInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains port infromation in specify vlan." 
    INDEX {hwMldRouterPortVlanIndex,hwMldRouterPortIfIndex} 
    ::= { hwMldRouterPortInfoTable 1 }
    
 HwMldRouterPortInfoEntry ::= SEQUENCE { 
    hwMldRouterPortVlanIndex       VlanIndex,
    hwMldRouterPortIfIndex         InterfaceIndex,
    hwMldRouterPortUpTime          Unsigned32,
    hwMldRouterPortExpires         Unsigned32, 
    hwMldRouterPortFlag           PortFlag
    }
    
 hwMldRouterPortVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "VLAN ID."
    ::= { hwMldRouterPortInfoEntry 1 }
  
 hwMldRouterPortIfIndex    OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "Router port name in specify vlan."
    ::= { hwMldRouterPortInfoEntry 2 } 
 
 hwMldRouterPortUpTime    OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Time for router port remains up state."
    ::= { hwMldRouterPortInfoEntry 3 }
      
hwMldRouterPortExpires    OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Time for router port expires."
    ::= { hwMldRouterPortInfoEntry 4}

hwMldRouterPortFlag      OBJECT-TYPE
    SYNTAX       PortFlag
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  
        "Router port flag."
    ::= { hwMldRouterPortInfoEntry 5}
 
hwMldRouterPortCfgTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldRouterPortCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table contains router port config information."
    ::= { hwMldPortInfo 4}

 hwMldRouterPortCfgEntry     OBJECT-TYPE
    SYNTAX       HwMldRouterPortCfgEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains router port config information." 
    INDEX { hwMldRouterPortCfgVlanIndex,hwMldRouterPortCfgIfIndex} 
    ::= { hwMldRouterPortCfgTable 1 }
    
 HwMldRouterPortCfgEntry ::= SEQUENCE { 
    hwMldRouterPortCfgVlanIndex          VlanIndex,
    hwMldRouterPortCfgIfIndex            InterfaceIndex, 
    hwMldRouterPortCfgRowStatus       RowStatus
    }
 
 hwMldRouterPortCfgVlanIndex   OBJECT-TYPE
    SYNTAX       VlanIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the VLAN in which VLAN is configed."
    ::= { hwMldRouterPortCfgEntry 1 }
  
 hwMldRouterPortCfgIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "This object indicates the interface which port is configed."
    ::= { hwMldRouterPortCfgEntry 2 }
          
hwMldRouterPortCfgRowStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object is used to create or delete a row
 	and represent the current status of this row."
    ::= { hwMldRouterPortCfgEntry 51}
    
hwMldPortLimitTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldPortLimitEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table contains MLD snooping entry count limit 
    information on a port."
    ::= { hwMldPortInfo 5}

  hwMldPortLimitEntry     OBJECT-TYPE
    SYNTAX       HwMldPortLimitEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains MLD snooping entry count limit 
    information on a port." 
    INDEX {hwMldPortLimitIfIndex, hwMldPortLimitVlanIndex} 
    ::= { hwMldPortLimitTable 1 }
    
 HwMldPortLimitEntry ::= SEQUENCE {
    hwMldPortLimitIfIndex               InterfaceIndex,
    hwMldPortLimitNumber                 Integer32,
    hwMldPortLimitVlanIndex              VlanIndex,
    hwMldPortLimitRowStatus        RowStatus
    }
    
 hwMldPortLimitIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "Index of the interface."
    ::= { hwMldPortLimitEntry 1 }
  
 hwMldPortLimitNumber    OBJECT-TYPE
    SYNTAX       Integer32 (1..1024)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The maximum number of MLD snooping entries
    can be configured or learned."
    ::= { hwMldPortLimitEntry 2 } 

 hwMldPortLimitVlanIndex    OBJECT-TYPE
    SYNTAX       VlanIndex 
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "The maximum number of MLD snooping entries
    can be configured or learned."
    ::= { hwMldPortLimitEntry 3 }
 
 hwMldPortLimitRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
 	and represent the current status of this row."
    ::= { hwMldPortLimitEntry 51 }

hwMldPortGroupPolicyTable     OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMldPortGroupPolicyEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table contains group policy config information in port."
    ::= { hwMldPortInfo 6}

  hwMldPortGroupPolicyEntry     OBJECT-TYPE
    SYNTAX       HwMldPortGroupPolicyEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "An entry contains group policy config information in port." 
    INDEX {hwMldPortGroupPolicyIfIndex, hwMldPortGroupPolicyVlanIndex} 
    ::= { hwMldPortGroupPolicyTable 1 }
    
 HwMldPortGroupPolicyEntry ::= SEQUENCE {
    hwMldPortGroupPolicyIfIndex               InterfaceIndex,
    hwMldPortGroupPolicyAclNumber                 Integer32,
    hwMldPortGroupPolicyVlanIndex              VlanIndex,
    hwMldPortGroupPolicyVersion                  INTEGER,
    hwMldPortGroupPolicyRowStatus        RowStatus
    }
    
 hwMldPortGroupPolicyIfIndex   OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "Index of the interface."
    ::= { hwMldPortGroupPolicyEntry 1 }
  
 hwMldPortGroupPolicyAclNumber    OBJECT-TYPE
    SYNTAX       Integer32 (-1|2000..3999)
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "The ACL number which is used as the group policy parameter."
    ::= { hwMldPortGroupPolicyEntry 2 } 

 hwMldPortGroupPolicyVlanIndex    OBJECT-TYPE
    SYNTAX       VlanIndex 
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "The vlan ID which group policy config."
    ::= { hwMldPortGroupPolicyEntry 3 }

 hwMldPortGroupPolicyVersion    OBJECT-TYPE
    SYNTAX       INTEGER {mldV1(1), mldV2(2)}
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object indicates the MLD version for the group policy."
    ::= { hwMldPortGroupPolicyEntry 4 }
    
 hwMldPortGroupPolicyRowStatus    OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION  
        "This object is used to create or delete a row
  and represent the current status of this row.
  Now support three state:CreateAndGo,Active,Destroy."
    ::= { hwMldPortGroupPolicyEntry 51 }    

-- 
--             Multicast vlan               
-- 
     
hwMVlanMibObject   
               OBJECT IDENTIFIER ::= { hwMultiCastMIB 3 }
         
hwMVlanSystemInfo  
              OBJECT IDENTIFIER ::= { hwMVlanMibObject 1 }
              
hwMVlanVlanCfgInfo 
              OBJECT IDENTIFIER ::= { hwMVlanMibObject 2 } 
hwMVlanGrpInfo                                             
			  OBJECT IDENTIFIER ::= { hwMVlanMibObject 3 } 
--
--1 hwMVlanSystemInfo
--
hwMVlanEnabled 		OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether MVlan function has been 
         enabled for the system."
    ::= { hwMVlanSystemInfo 1 } 
--
--2 hwMVlanVlanCfgInfo
--
--
--   hwMVlanEnableTable
--
    
hwMVlanEnableTable 	OBJECT-TYPE
    SYNTAX       SEQUENCE OF HwMVlanEnableEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table which indicates which vlan had been configured as Multicast-Vlan."
    ::= { hwMVlanVlanCfgInfo 1 }  
    
hwMVlanEnableEntry OBJECT-TYPE
    SYNTAX       HwMVlanEnableEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Entry for vlan which had been configured as Multicast-Vlan."
    INDEX { hwMVlanIndex }
    ::= { hwMVlanEnableTable 1 } 
     
HwMVlanEnableEntry ::= SEQUENCE { 
    hwMVlanIndex                VlanIndex,
    hwMVlanStatus               RowStatus
    }     
        
hwMVlanIndex  OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Vlan index which had been configured as Multicast-Vlan."
        ::= { hwMVlanEnableEntry 1 }

hwMVlanStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The activation of a row enables MVlan in the interface.  The
            destruction of a row disables MVlan in the interface."
    ::= { hwMVlanEnableEntry 100 } 

--
--   hwMVlanUserVlanTable
--
    
hwMVlanUserVlanTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWMVlanUserVlanEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table which indicates the user vlans in a MVlan."
    ::= { hwMVlanVlanCfgInfo 2 }

hwMVlanUserVlanEntry OBJECT-TYPE
    SYNTAX       HWMVlanUserVlanEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Entry for User vlan in a Mvlan."
    INDEX { hwMVlanIndex,hwUserVlanIndex }
    ::= { hwMVlanUserVlanTable 1 } 
     
HWMVlanUserVlanEntry ::= SEQUENCE { 
    hwUserVlanIndex                  VlanIndex,
    hwUserVlanCfgRowStatus           RowStatus
    }

hwUserVlanIndex  OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Vlan index which in the given MVlan."
     ::= { hwMVlanUserVlanEntry 1 } 

hwUserVlanCfgRowStatus  OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current

    DESCRIPTION
        "This object is used to create or delete a row
  and represent the current status of this row."
     ::= { hwMVlanUserVlanEntry 100 }   
     
--
--   hwUserVlanTable
--
hwUserVlanTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwUserVlanEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates which vlan had been
		 configured as flow trigger."
	::= { hwMVlanVlanCfgInfo 3 }
	
hwUserVlanEntry OBJECT-TYPE
	SYNTAX HwUserVlanEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Entry for vlan which had been configured
		 as flow trigger."
	INDEX { hwUserVlanIndex }
	::= { hwUserVlanTable 1 }

HwUserVlanEntry ::= SEQUENCE { 
    hwUserVlanFlowTriggerEnable           EnabledStatus
    }

hwUserVlanFlowTriggerEnable OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates user vlan's flow trigger status."
	::= { hwUserVlanEntry 1 }

--
--   hwMcSourceDenyTable
--
hwMcSourceDenyTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcSourceDenyEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates which vlan and which port had been 
		configured as source deny."
	::= { hwMVlanVlanCfgInfo 4 }
	
hwMcSourceDenyEntry OBJECT-TYPE
	SYNTAX HwMcSourceDenyEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Entry for vlan and port which had been configured 
		source deny."
	INDEX { hwMcSourceDenyVlanIndex, hwMcSourceDenyIfIndex }
	::= { hwMcSourceDenyTable 1 }

HwMcSourceDenyEntry ::= SEQUENCE { 
    hwMcSourceDenyVlanIndex           VlanIndex,
    hwMcSourceDenyIfIndex             InterfaceIndex,
    hwMcSourceDenyRowStatus           RowStatus
    }

hwMcSourceDenyVlanIndex OBJECT-TYPE
	SYNTAX VlanIndex
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"VLAN index."
	::= { hwMcSourceDenyEntry 1 }

hwMcSourceDenyIfIndex  OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Interface index."
     ::= { hwMcSourceDenyEntry 2 }
    
hwMcSourceDenyRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent
		 the current status of this row."
	::= { hwMcSourceDenyEntry 51 }
    

--
--3 hwMVlanGrpInfo
--
     
--
--   hwMVlanGrpInfoTable
--
         
hwMVlanGrpInfoTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF HWMVlanGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Table which indicates Mvlan group information."
    ::= { hwMVlanGrpInfo 1 }

hwMVlanGrpInfoEntry OBJECT-TYPE
    SYNTAX       HWMVlanGrpInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Entry for Mvlan group information."
    INDEX { hwMVlanIndex ,hwMVlanGrpAddress, hwMVlanGrpPortIfIndex, hwMVlanGrpUserVlanIndex}
    ::= { hwMVlanGrpInfoTable 1 } 
     
HWMVlanGrpInfoEntry ::= SEQUENCE { 
    hwMVlanGrpAddress                  IpAddress,
    hwMVlanGrpPortIfIndex              InterfaceIndex,
    hwMVlanGrpUserVlanIndex            VlanIndex 
    }

hwMVlanGrpAddress  OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Multicast group address."
     ::= { hwMVlanGrpInfoEntry 1 } 

hwMVlanGrpPortIfIndex  OBJECT-TYPE
    SYNTAX          InterfaceIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Interface index."
     ::= { hwMVlanGrpInfoEntry 2 }     
hwMVlanGrpUserVlanIndex  OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "User vlan index."
     ::= { hwMVlanGrpInfoEntry 3 } 

--
--    hwMVlanStaticFlowTable
--

hwMVlanStaticFlowTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMVlanStaticFlowEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates Mvlan static flow group information."
	::= { hwMVlanGrpInfo 2 }

hwMVlanStaticFlowEntry OBJECT-TYPE
	SYNTAX HwMVlanStaticFlowEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Entry for Mvlan static flow group information."
	INDEX { hwMVlanIndex, hwMVlanStaticFlowGrpAddress }
	::= { hwMVlanStaticFlowTable 1 }
	
HwMVlanStaticFlowEntry ::= SEQUENCE { 
    hwMVlanStaticFlowGrpAddress         IpAddress,
    hwMVlanStaticFlowRowStatus          RowStatus
    }
hwMVlanStaticFlowGrpAddress OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Static flow address."
	::= { hwMVlanStaticFlowEntry 1 }

hwMVlanStaticFlowRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and
		 represent the current status of this row."
	::= { hwMVlanStaticFlowEntry 2 }
--
--    hwMVlanIpv6StaticFlowTable
--

hwMVlanIpv6StaticFlowTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMVlanIpv6StaticFlowEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates Mvlan static flow group information."
	::= { hwMVlanGrpInfo 3 }

hwMVlanIpv6StaticFlowEntry OBJECT-TYPE
	SYNTAX HwMVlanIpv6StaticFlowEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Entry for Mvlan static flow group information."
	INDEX { hwMVlanIndex, hwMVlanStaticFlowIpv6GrpAddress, hwMVlanStaticFlowIpv6SourceAddress }
	::= { hwMVlanIpv6StaticFlowTable 1 }
	
HwMVlanIpv6StaticFlowEntry ::= SEQUENCE { 
    hwMVlanStaticFlowIpv6GrpAddress         Ipv6Address,
    hwMVlanStaticFlowIpv6SourceAddress      Ipv6Address,
    hwMVlanIpv6StaticFlowRowStatus          RowStatus
    }
    
hwMVlanStaticFlowIpv6GrpAddress OBJECT-TYPE
	SYNTAX Ipv6Address
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Static flow address."
	::= { hwMVlanIpv6StaticFlowEntry 1 }

hwMVlanStaticFlowIpv6SourceAddress OBJECT-TYPE
	SYNTAX Ipv6Address
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Static flow source IP address."
	::= { hwMVlanIpv6StaticFlowEntry 2 }

hwMVlanIpv6StaticFlowRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row."
	::= { hwMVlanIpv6StaticFlowEntry 51 }

--
--    hwExternMVlanStaticFlowTable
--        

hwExternMVlanStaticFlowTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwExternMVlanStaticFlowEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates MVLAN static flow group information."
	::= { hwMVlanGrpInfo 4 }

hwExternMVlanStaticFlowEntry OBJECT-TYPE
	SYNTAX HwExternMVlanStaticFlowEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Entry for MVLAN static flow group information."
	INDEX { hwMVlanIndex, hwExternMVlanStaticFlowGrpAddress,hwExternMVlanStaticFlowSourceAddress }
	::= { hwExternMVlanStaticFlowTable 1 }
	
HwExternMVlanStaticFlowEntry ::= SEQUENCE { 
    hwExternMVlanStaticFlowGrpAddress         IpAddress,
    hwExternMVlanStaticFlowSourceAddress      IpAddress,
    hwExternMVlanStaticFlowRowStatus          RowStatus
    }
    
hwExternMVlanStaticFlowGrpAddress OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Static flow address."
	::= { hwExternMVlanStaticFlowEntry 1 }

hwExternMVlanStaticFlowSourceAddress OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Static flow source IP address."
	::= { hwExternMVlanStaticFlowEntry 2 }

hwExternMVlanStaticFlowRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and
		 represent the current status of this row."
	::= { hwExternMVlanStaticFlowEntry 51 }
	 
--
--             hwMultiCastCommonObject  
--
     
hwMultiCastCommonObject   
    OBJECT IDENTIFIER ::= { hwMultiCastMIB 4 }
      
hwMCSystemInfo  
    OBJECT IDENTIFIER ::= { hwMultiCastCommonObject 1 }
--
--  hwEthTrunkLoadBalancingInfo
--
hwEthTrunkLoadBalancingEnabled OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether Eth-Trunk Load 
         Balancing function has been 
         enabled for the system."
    ::= { hwMCSystemInfo 1 }   

--
--hwL2CacTrapObject  
--

hwL2CacTrapObject   
               OBJECT IDENTIFIER ::= { hwMultiCastMIB 5 }
hwL2mcCacCount OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the upper limit of the number of l2-multicast groups."
    ::= { hwL2CacTrapObject 1 }    
     
hwL2mcCacBandwidth OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the upper limit of the bandwidth of l2-multicast groups,in Mbits/sec."
    ::= { hwL2CacTrapObject 2 } 
 
hwL2mcCacGroupAddress OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the group IP address denied by CAC."
    ::= { hwL2CacTrapObject 3 }

hwL2mcCacChannelName OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the name of channel."
    ::= { hwL2CacTrapObject 4 }

hwL2mcCacVlanIndex OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the VLAN ID."
    ::= { hwL2CacTrapObject 5 } 

hwL2mcCacVsiName OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the name of VSI."
    ::= { hwL2CacTrapObject 6 } 

hwL2mcCacIfIndex OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the interface index."
    ::= { hwL2CacTrapObject 7 } 

hwL2mcCacPwId OBJECT-TYPE   
    SYNTAX       Unsigned32
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the PW ID."
    ::= { hwL2CacTrapObject 8 }
    
hwL2mcCacRemoteIpAddress OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the remote peer IP address."
    ::= { hwL2CacTrapObject 9 }    
    
hwL2mcCacRemoteSiteId OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   accessible-for-notify
    STATUS       current
    DESCRIPTION
        "This object indicates the remote site ID."
    ::= { hwL2CacTrapObject 10 }

--
--             hwBtvMibObject  
--
     
hwBtvMibObject OBJECT IDENTIFIER    ::= { hwMultiCastMIB 6 }

hwBtvSystemInfo OBJECT IDENTIFIER   ::= { hwBtvMibObject 1 }
hwBtvCfgInfo OBJECT IDENTIFIER      ::= { hwBtvMibObject 2 }

hwBtvEnabled OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Object which indicates whether BTV Function has been enabled for the system."
	::= { hwBtvSystemInfo 1 }


hwMcastGroupTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastGroupEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table contains multicast group config information."
	::= { hwBtvCfgInfo 1 }
	
hwMcastGroupEntry OBJECT-TYPE
	SYNTAX HwMcastGroupEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains multicast group config information."
	INDEX { hwMcastGroupIndex }
	::= { hwMcastGroupTable 1 }
	
HwMcastGroupEntry ::= SEQUENCE { 
    hwMcastGroupIndex           Integer32,
    hwMcastGroupName            DisplayString,
    hwMcastGroupAddress         IpAddress,
    hwMcastGroupRowStatus       RowStatus,
    hwMcastSourceAddress        IpAddress
    }
    
hwMcastGroupIndex OBJECT-TYPE
	SYNTAX Integer32 (1..1024)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Multicast group index."
	::= { hwMcastGroupEntry 1 }
	
hwMcastGroupName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Multicast group name."
	::= { hwMcastGroupEntry 2 }

hwMcastGroupAddress OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Multicast group address."
	::= { hwMcastGroupEntry 3 }
	
hwMcastGroupRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row
		 and represent the current status of this row."
	::= { hwMcastGroupEntry 4 }

hwMcastSourceAddress OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Source IP address."
	::= { hwMcastGroupEntry 5 }

hwMcastListTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastListEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates multicast list information."
	::= { hwBtvCfgInfo 2 }

hwMcastListEntry OBJECT-TYPE
	SYNTAX HwMcastListEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains multicast list config information."
	INDEX { hwMcastListIndex }
	::= { hwMcastListTable 1 }

HwMcastListEntry ::= SEQUENCE { 
    hwMcastListIndex            Integer32,
    hwMcastListName             DisplayString,
    hwMcastListRowStatus        RowStatus
    }   
    	
hwMcastListIndex OBJECT-TYPE
	SYNTAX Integer32 (1..128)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Multicast list index."
	::= { hwMcastListEntry 1 }

hwMcastListName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Multicast list name."
	::= { hwMcastListEntry 2 }

hwMcastListRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row."
	::= { hwMcastListEntry 3 }


hwMcastProfileTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table which indicates multicast profile information."
	::= { hwBtvCfgInfo 3 }

hwMcastProfileEntry OBJECT-TYPE
	SYNTAX HwMcastProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains multicast profile config information."
	INDEX { hwMcastProfileIndex }
	::= { hwMcastProfileTable 1 }
	
HwMcastProfileEntry ::= SEQUENCE { 
    hwMcastProfileIndex            Integer32,
    hwMcastProfileName             DisplayString,
    hwMcastProfileRowStatus        RowStatus
    } 

hwMcastProfileIndex OBJECT-TYPE
	SYNTAX Integer32 (1..64)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Multicast profile index."
	::= { hwMcastProfileEntry 1 }

hwMcastProfileName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Multicast profile name."
	::= { hwMcastProfileEntry 2 }

hwMcastProfileRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row.."
	::= { hwMcastProfileEntry 3 }

hwMcastProfileCfgTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastProfileCfgEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table contains multicast profile based configuration information for IPTV."
	::= { hwBtvCfgInfo 4 }

hwMcastProfileCfgEntry OBJECT-TYPE
	SYNTAX HwMcastProfileCfgEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains configuration for multicast profile."
	INDEX { hwMcastProfileIndex }
	::= { hwMcastProfileCfgTable 1 }
	
HwMcastProfileCfgEntry ::= SEQUENCE { 
    hwMcastProfileCfgPreviewTimes           Integer32,
    hwMcastProfileCfgPreviewMinute          Integer32,
    hwMcastProfileCfgPreviewInterval        Integer32,
    hwMcastProfileCfgMaxNumProgram          Integer32
    }

hwMcastProfileCfgPreviewTimes OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Times of preview a multicast group one day."
	::= { hwMcastProfileCfgEntry 1 }

hwMcastProfileCfgPreviewMinute OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Preview time(in minutes)."
	::= { hwMcastProfileCfgEntry 2 }

hwMcastProfileCfgPreviewInterval OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Preview interval(in minutes)."
	::= { hwMcastProfileCfgEntry 3 }

hwMcastProfileCfgMaxNumProgram OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Max number of the multicast program watching and previewing."
	::= { hwMcastProfileCfgEntry 4 }

hwMcastListReferTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastListReferEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table contains multicast list refers to multicast group."
	::= { hwBtvCfgInfo 5 }

hwMcastListReferEntry OBJECT-TYPE
	SYNTAX HwMcastListReferEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains multicast list refers to multicast group."
	INDEX { hwMcastListIndex, hwMcastGroupIndex }
	::= { hwMcastListReferTable 1 }
	
HwMcastListReferEntry ::= SEQUENCE { 
    hwMcastListReferRowStatus              RowStatus
    }

hwMcastListReferRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row."
	::= { hwMcastListReferEntry 5 }

hwMcastProfileReferTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastProfileReferEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table contains multicast profile refers to multicast list."
	::= { hwBtvCfgInfo 6 }

hwMcastProfileReferEntry OBJECT-TYPE
	SYNTAX HwMcastProfileReferEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains multicast profile refers to multicast list."
	INDEX { hwMcastProfileIndex, hwMcastListIndex }
	::= { hwMcastProfileReferTable 1 }

HwMcastProfileReferEntry ::= SEQUENCE { 
    hwMcastPreviewStatus                      EnabledStatus,
    hwMcastProfileReferRowStatus              RowStatus
    }

hwMcastPreviewStatus OBJECT-TYPE
	SYNTAX EnabledStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row."
	::= { hwMcastProfileReferEntry 1 }

hwMcastProfileReferRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Table contains vlan apply multicast profile."
	::= { hwMcastProfileReferEntry 5 }

hwVlanApplyProfileTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwVlanApplyProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains attach a vlan to a multicast profile."
	::= { hwBtvCfgInfo 7 }

hwVlanApplyProfileEntry OBJECT-TYPE
	SYNTAX HwVlanApplyProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Description."
	INDEX { hwUserVlanIndex, hwMcastProfileIndex }
	::= { hwVlanApplyProfileTable 1 }

HwVlanApplyProfileEntry ::= SEQUENCE { 
    hwVlanApplyProfileRowStatus              RowStatus
    }
    
hwVlanApplyProfileRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row."
	::= { hwVlanApplyProfileEntry 5 }
    
hwMcastIpv6GroupTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwMcastIpv6GroupEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table contains multicast group config information."
	::= { hwBtvCfgInfo 8 }
	
hwMcastIpv6GroupEntry OBJECT-TYPE
	SYNTAX HwMcastIpv6GroupEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains multicast group config information."
	INDEX { hwMcastIpv6GroupIndex }
	::= { hwMcastIpv6GroupTable 1 }
	
HwMcastIpv6GroupEntry ::= SEQUENCE { 
    hwMcastIpv6GroupIndex           Integer32,
    hwMcastIpv6GroupName            DisplayString,
    hwMcastIpv6GroupAddress         Ipv6Address,
    hwMcastIpv6SourceAddress        Ipv6Address,
    hwMcastIpv6GroupRowStatus       RowStatus
    }
    
hwMcastIpv6GroupIndex OBJECT-TYPE
	SYNTAX Integer32 (1..1024)
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Multicast group index."
	::= { hwMcastIpv6GroupEntry 1 }
	
hwMcastIpv6GroupName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Multicast group name."
	::= { hwMcastIpv6GroupEntry 2 }

hwMcastIpv6GroupAddress OBJECT-TYPE
	SYNTAX Ipv6Address
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Multicast group address."
	::= { hwMcastIpv6GroupEntry 3 }

hwMcastIpv6SourceAddress OBJECT-TYPE
	SYNTAX Ipv6Address
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"Source IP address."
	::= { hwMcastIpv6GroupEntry 4 }
	
hwMcastIpv6GroupRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row
		 and represent the current status of this row."
	::= { hwMcastIpv6GroupEntry 51}   
	
--
--  hwExternVlanApplyProfileTable
--

hwExternVlanApplyProfileTable OBJECT-TYPE
	SYNTAX SEQUENCE OF HwExternVlanApplyProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Table contains attach a vlan to a multicast profile."
	::= { hwBtvCfgInfo 9 }

hwExternVlanApplyProfileEntry OBJECT-TYPE
	SYNTAX HwExternVlanApplyProfileEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"An entry contains attach a vlan to a multicast profile.."
	INDEX { hwUserVlanIndex, hwMcastProfileIndex, hwExternPortIfIndex, hwExternSourceMacAddress }
	::= { hwExternVlanApplyProfileTable 1 }

HwExternVlanApplyProfileEntry ::= SEQUENCE { 
	hwExternPortIfIndex                            InterfaceIndex,
	hwExternSourceMacAddress                       MacAddress,
        hwExternVlanApplyProfileRowStatus              RowStatus
    }

hwExternPortIfIndex OBJECT-TYPE
	SYNTAX InterfaceIndex
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"This object indicates port index."
	::= { hwExternVlanApplyProfileEntry 1 }

hwExternSourceMacAddress OBJECT-TYPE
	SYNTAX MacAddress
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
		"Source MAC address."
	::= { hwExternVlanApplyProfileEntry 2 }

hwExternVlanApplyProfileRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This object is used to create or delete a row and represent the current status of this row."
	::= { hwExternVlanApplyProfileEntry 51 }	
	
--
--hwMcastAlarmObject
--
hwMcastAlarmObject   
               OBJECT IDENTIFIER ::= { hwMultiCastMIB 99 }


    hwCfgRefreshFailAlarm NOTIFICATION-TYPE
        OBJECTS {
            hwL2VlanDescr
            }  
        STATUS             current
        DESCRIPTION
            "Failed to refresh multicast table! "
        ::= { hwMcastAlarmObject 1 }
        
    hwMCastTableLoadAbnormalNotify NOTIFICATION-TYPE
        STATUS             current
        DESCRIPTION
            "Multicast table of router was full!"
        ::= { hwMcastAlarmObject 2 }  
          
    hwMCastTableLoadAbnormalResume NOTIFICATION-TYPE
        STATUS             current
        DESCRIPTION
            "Multicast table of router was normal!"
        ::= { hwMcastAlarmObject 3 }  
        
    hwMCastVlanFailAlarm NOTIFICATION-TYPE
        OBJECTS {
            hwL2VlanDescr
            }
        STATUS             current
        DESCRIPTION
            "VLAN which  has been configed with protect-vlan failed! "
        ::= { hwMcastAlarmObject 4 }  
        
    hwMCastVlanOkNotify NOTIFICATION-TYPE
        OBJECTS {
            hwL2VlanDescr
            }
        STATUS             current
        DESCRIPTION
            "VLAN which  has been configed with protect-vlan has been OK! "
        ::= { hwMcastAlarmObject 5 }  
        
    hwMCastApsSwitchAlarm NOTIFICATION-TYPE
        OBJECTS {
            hwL2VlanDescr
            }
        STATUS             current
        DESCRIPTION
            "APS is switching!"
        ::= { hwMcastAlarmObject 6 }  
        
    hwMCastApsIdleNotify NOTIFICATION-TYPE
        OBJECTS {
            hwL2VlanDescr
            }
        STATUS             current
        DESCRIPTION
            "APS has finished switching and been idle!"
        ::= { hwMcastAlarmObject 7 }  
  ---
  ---Trap for l2-multicast CAC
  --- 
    hwL2mcCacGlobalCountExceed NOTIFICATION-TYPE
        OBJECTS {
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 8 }    
        
    hwL2mcCacGlobalBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 9 } 
        
         hwL2mcCacGlobalChannelCountExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacChannelName,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 10 }    
        
        hwL2mcCacGlobalChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacChannelName,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 11 }  
        
        hwL2mcCacVlanCountExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacVlanIndex,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VLAN ID,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 12 }  
        
        hwL2mcCacVlanBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacVlanIndex,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VLAN ID,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 13 }  
        
        hwL2mcCacVlanChannelCountExceed NOTIFICATION-TYPE
        OBJECTS {    
            hwL2mcCacChannelName,
            hwL2mcCacVlanIndex,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,VLAN ID,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 14 }
        
        hwL2mcCacVlanChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {    
            hwL2mcCacChannelName,
            hwL2mcCacVlanIndex,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,VLAN ID,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 15 }                           
        
        hwL2mcCacVsiCountExceed NOTIFICATION-TYPE
        OBJECTS {    
            hwL2mcCacVsiName,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VSI name,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 16 }           

        hwL2mcCacVsiBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {    
            hwL2mcCacVsiName,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VSI name,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 17 }   
        
        hwL2mcCacVsiChannelCountExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacChannelName,   
            hwL2mcCacVsiName,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,VSI name,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 18 } 
        
        hwL2mcCacVsiChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacChannelName,   
            hwL2mcCacVsiName,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,VSI name,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 19 }  
        
        hwL2mcCacPortCountExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacIfIndex,   
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:interface index,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 20 }    
        
        hwL2mcCacPortBandwidthExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacIfIndex,   
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:interface index,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 21 }  
        
        hwL2mcCacPortChannelCountExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacChannelName,
            hwL2mcCacIfIndex,   
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,interface index,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 22 } 
        
        hwL2mcCacPortChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacChannelName,
            hwL2mcCacIfIndex,   
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,interface index,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 23 }        

        hwL2mcCacPortVlanCountExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacVlanIndex,
            hwL2mcCacIfIndex,   
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VLAN ID,interface index,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 24 }                                           

        hwL2mcCacPortVlanBandwidthExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacVlanIndex,
            hwL2mcCacIfIndex,   
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VLAN ID,interface index,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 25 }     

        hwL2mcCacPortVlanChannelCountExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacChannelName,
            hwL2mcCacVlanIndex,
            hwL2mcCacIfIndex,   
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,VLAN ID,interface index,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 26 }   

        hwL2mcCacPortVlanChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacChannelName,
            hwL2mcCacVlanIndex,
            hwL2mcCacIfIndex,   
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,VLAN ID,interface index,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 27 }   
        
        hwL2mcCacSubIfCountExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacIfIndex,   
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:interface index,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 28 }        
        
        hwL2mcCacSubIfBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {  
            hwL2mcCacIfIndex,   
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:interface index,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 29 }      
        
        hwL2mcCacSubIfChannelCountExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacChannelName, 
            hwL2mcCacIfIndex,   
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,interface index,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 30 } 
        
        hwL2mcCacSubIfChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacChannelName, 
            hwL2mcCacIfIndex,   
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,interface index,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 31 }         

        hwL2mcCacLdpPwCountExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacPwId,
            hwL2mcCacRemoteIpAddress,  
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:PW ID,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 32 }   
        
        hwL2mcCacLdpPwBandwidthExceed NOTIFICATION-TYPE
        OBJECTS { 
            hwL2mcCacPwId,   
            hwL2mcCacRemoteIpAddress,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:PW ID,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 33 }  
        
        hwL2mcCacLdpPwChannelCountExceed NOTIFICATION-TYPE
        OBJECTS {
            hwL2mcCacChannelName, 
            hwL2mcCacPwId, 
            hwL2mcCacRemoteIpAddress, 
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,PW ID,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 34 }   
         
        hwL2mcCacLdpPwChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {
            hwL2mcCacChannelName, 
            hwL2mcCacPwId,  
            hwL2mcCacRemoteIpAddress,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,PW ID,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 35 }     
        
        hwL2mcCacBgpPwCountExceed NOTIFICATION-TYPE
        OBJECTS {
            hwL2mcCacRemoteSiteId,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:remote site ID,PW ID,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 36 } 
        
        hwL2mcCacBgpPwBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {
            hwL2mcCacRemoteSiteId,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:remote site ID,PW ID,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 37 }  
        
        hwL2mcCacBgpPwChannelCountExceed NOTIFICATION-TYPE
        OBJECTS {     
            hwL2mcCacChannelName,
            hwL2mcCacRemoteSiteId,
            hwL2mcCacCount,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,remote site ID,PW ID,currently configured limit count,group IP address."
        ::= { hwMcastAlarmObject 38 }  
        
        hwL2mcCacBgpPwChannelBandwidthExceed NOTIFICATION-TYPE
        OBJECTS {     
            hwL2mcCacChannelName,
            hwL2mcCacRemoteSiteId,
            hwL2mcCacBandwidth,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:channel name,remote site ID,PW ID,currently configured limit bandwidth,group IP address."
        ::= { hwMcastAlarmObject 39 }
        
        hwL2mcCacVlanUnspecifiedChannelDeny NOTIFICATION-TYPE
        OBJECTS {     
            hwL2mcCacVlanIndex,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VLAN ID."
        ::= { hwMcastAlarmObject 40 }             
        
        hwL2mcCacVsiUnspecifiedChannelDeny NOTIFICATION-TYPE
        OBJECTS {     
            hwL2mcCacVsiName,
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC:VSI name."
        ::= { hwMcastAlarmObject 41 }         
        
        hwL2mcCacGlobalUnspecifiedChannelDeny NOTIFICATION-TYPE
        OBJECTS {     
            hwL2mcCacGroupAddress
            }
        STATUS             current
        DESCRIPTION
            "Trap information about l2-multicast CAC."
        ::= { hwMcastAlarmObject 42 }
                 
     
--
-- Conformance Information
--
hwMCMibConformance OBJECT IDENTIFIER ::= { hwMultiCastMIB 100 }
hwMCMibCompliances OBJECT IDENTIFIER ::= { hwMCMibConformance 1 }
hwMCMibGroups OBJECT IDENTIFIER ::= { hwMCMibConformance 2 }

hwIGSPMibCompliance       MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            "The compliance statement for device supporting
             IGMP Snooping."
        MODULE 
        MANDATORY-GROUPS{   
                hwIGSPSystemInfoGroup,
                hwVlanCfgGroup,
                hwSystemStatisticsGroup,
                hwVlanStatisticsGroup,
                hwIPGrpInfoGroup,
                hwMACGrpInfoGroup,
                hwPortStaticGrpGroup,
                hwGrpPolicyCfgGroup,
                hwRouterPortInfoGroup,
                hwRouterPortCfgGroup,
                hwPortLimitGroup,
                hwMVlanSystemGroup,
                hwMVlanEnableGroup,
                hwMVlanUserVlanGroup,
                hwMVlanGrpInfoGroup,
                hwMCastSystemGroup,
                hwMcastAlarmGroup,
                hwL2CacTrapGroup,
                hwUserVlanGroup,
                hwMVlanStaticFlowGroup,  
                hwBtvSystemGroup,
                hwMcastGroupGroup,
                hwMcastListGroup,
                hwMcastProfileGroup,
                hwMcastProfileCfgGroup,
                hwMcastListReferGroup,
                hwMcastProfileReferGroup,
                hwVlanApplyProfileGroup,
                hwPortGroupPolicyGroup,
                hwMldSnpgSystemInfoGroup,
                hwMldVlanCfgGroup,
                hwMldSystemStatisticsGroup,
                hwMldVlanStatisticsGroup,
                hwMldIpGrpInfoGroup,
                hwMldPortStaticGrpGroup,
                hwMldGrpPolicyCfgGroup,
                hwMldRouterPortInfoGroup,
                hwMldRouterPortCfgGroup,
                hwMldPortLimitGroup,
                hwMldPortGroupPolicyGroup,
                hwMcSourceDenyGroup,
                hwMVlanIpv6StaticFlowGroup,
                hwMcastIpv6GroupGroup,
                hwExternIpGrpInfoGroup,
                hwExternPortStaticGrpGroup,
                hwPortVlanLimitGroup,
                hwExternMVlanStaticFlowGroup,
                hwExternVlanApplyProfileGroup
                }          
        ::= { hwMCMibCompliances 1 }
        
hwIGSPSystemInfoGroup OBJECT-GROUP
       OBJECTS {
                hwIgmpSnoopingEnabled,
                hwSsmPolicyAclNum,
                hwSendQueryEnabled,
                hwSendQuerySourceIpAddr,
                hwSnmpTrapEnable,
                hwIgmpSnoopingSuppressionTime,    
                hwIgmpProxyEnabled,
                hwIgmpSnoopingProxyEnabled
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 1 }
        
hwVlanCfgGroup OBJECT-GROUP
       OBJECTS {
                hwVlanIgmpSnoopingEnabled,
                hwVlanRouterAgingTime,
                hwVlanMaxQueryRespTime,
                hwVlanLastMemQueryInt,
                hwVlanQueryInt,
                hwVlanRobustCount,
                hwVlanCheckRouterAlert,
                hwVlanSendRouterAlert,
                hwVlanIgmpVersion,
                hwVlanPromptLeaveEnable,
                hwVlanPromptLeaveAclNum,
                hwVlanDropUnknown,
                hwVlanLimitAction
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 2 }

hwSystemStatisticsGroup OBJECT-GROUP
       OBJECTS {                                  
                hwSystemRecvVlanUpEventTimes,
                hwSystemRecvVlanDownEventTimes,
                hwSystemRecvVlanDelEventTimes,
                hwSystemRecvPortUpEventTimes,
                hwSystemRecvPortDownEventTimes,
                hwSystemRecvPortDelEventTimes,
                hwSystemRecvPortIncEventTimes,
                hwSystemRecvPortExcEventTimes,
                hwSystemRecvMSTPBlockEventTimes,
                hwSystemRecvMSTPForwardEventTimes,
                hwSystemIGMPSysClearStats,
                hwSystemIGMPPacketClearStats,
                hwSystemRecvLinkChangeEventTimes
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 3 } 
        
hwVlanStatisticsGroup OBJECT-GROUP
       OBJECTS {                                  
                hwVlanRecvIGMPV1ReportNum,        
                hwVlanRecvIGMPV2ReportNum,        
                hwVlanRecvIGMPV3ReportNum,        
                hwVlanRecvIGMPLeaveNum,           
                hwVlanRecvIGMPV1QueryNum,         
                hwVlanRecvIGMPV2QueryNum,         
                hwVlanRecvIGMPV3QueryNum,         
                hwVlanRecvPimHelloNum,            
                hwVlanSendQueryNum,               
                hwVlanIGMPPacketClearStats,
                hwVlanSendSourceIPSpecQueryNum       
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 4 }                   

hwIPGrpInfoGroup OBJECT-GROUP
       OBJECTS {                                  
                hwIPGrpUpTime,
                hwIPHostUpTime,
                hwIPHostExpires,
                hwIPHostFlags,
                hwIPRtUPTime,
                hwIPRtExpires,
                hwIPRtFlags   
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 5 } 


hwMACGrpInfoGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMACGrpAddress
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 6 } 

hwPortStaticGrpGroup OBJECT-GROUP
       OBJECTS {                                  
                hwPortStaticGrpRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 7 } 
        
hwGrpPolicyCfgGroup OBJECT-GROUP
       OBJECTS {                                  
                hwGrpPolicyAclNum,
                hwGrpPolicyIgmpVersion,
                hwGrpPolicyRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 8 }

hwRouterPortInfoGroup OBJECT-GROUP
       OBJECTS {                                  
                hwRouterPortUpTime,
                hwRouterPortExpires,
                hwRouterPortFlags
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 9 }
        
hwRouterPortCfgGroup OBJECT-GROUP
       OBJECTS {                                  
                hwRouterPortCfgRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 10 }   

hwPortLimitGroup OBJECT-GROUP
       OBJECTS {
                hwPortLimitNumber,                                  
                hwPortLimitRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 11 } 
             
hwMVlanSystemGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMVlanEnabled
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 13 }        

hwMVlanEnableGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMVlanStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "."                                   
        ::= { hwMCMibGroups 14 }  


hwMVlanUserVlanGroup OBJECT-GROUP   
       OBJECTS {                  
                hwUserVlanCfgRowStatus
               }                  
        STATUS current            
        DESCRIPTION               
            "."                   
        ::= { hwMCMibGroups 15 }  

hwMVlanGrpInfoGroup OBJECT-GROUP   
       OBJECTS {                  
                hwMVlanGrpAddress
               }                  
        STATUS current            
        DESCRIPTION               
            "."                   
        ::= { hwMCMibGroups 16 }

hwMCastSystemGroup OBJECT-GROUP   
       OBJECTS {                  
                hwEthTrunkLoadBalancingEnabled
               }                  
        STATUS current            
        DESCRIPTION               
            "."                   
        ::= { hwMCMibGroups 18 }


hwL2CacTrapGroup OBJECT-GROUP   
       OBJECTS {                  
                hwL2mcCacCount,
                hwL2mcCacBandwidth,
                hwL2mcCacGroupAddress,
                hwL2mcCacChannelName,
                hwL2mcCacVlanIndex,
                hwL2mcCacVsiName,
                hwL2mcCacIfIndex,
                hwL2mcCacPwId,
                hwL2mcCacRemoteIpAddress, 
                hwL2mcCacRemoteSiteId          
               }                  
        STATUS current            
        DESCRIPTION               
            "The group of l2-multicast CAC."                   
        ::= { hwMCMibGroups 19 }       
        
          
hwVlanIgmpProxyGroup OBJECT-GROUP
       OBJECTS {
                hwVlanIgmpProxyEnabled,
                hwVlanQueryInterval,
                hwVlanMaxResponseTime,
                hwVlanLastMemQueryInterval,
                hwVlanIgmpRouterAgingTime,
                hwVlanMaxIgmpVersion,
                hwVlanIgmpRobustCount,
                hwVlanRequireRouterAlert,
                hwVlanIgmpSendRouterAlert,
                hwVlanIgmpPromptLeaveEnable
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 20 } 


hwL2McastVlanCfgGroup OBJECT-GROUP
       OBJECTS {
                hwVlanL2FlowTriggerEnabled,
                hwVlanL2StaticFlow
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 21 }

hwGrpMcastCfgGroup OBJECT-GROUP
       OBJECTS {
                hwGrpIpAddress,
                hwGrpRowStatus
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 22 }    
        
hwVlanMcastGrpGroup OBJECT-GROUP
       OBJECTS {
                hwVlanMcastProfileName
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 23 }

hwGrpMcastProfileGroup OBJECT-GROUP
       OBJECTS {
                hwMulticastProfilePreviewTimes,
                hwMulticastProfilePreviewMinutes,
                hwMulticastProfilePreviewInterval
               }
        STATUS current
        DESCRIPTION
            "."
        ::= { hwMCMibGroups 24 }
hwUserVlanGroup OBJECT-GROUP
	OBJECTS { hwUserVlanFlowTriggerEnable }
	STATUS current
	DESCRIPTION 
		"The group of user vlan config flow-trigger."
	::= { hwMCMibGroups 25 } 
	
hwMVlanStaticFlowGroup OBJECT-GROUP
	OBJECTS { hwMVlanStaticFlowRowStatus }
	STATUS current
	DESCRIPTION 
		"The group of multicast vlan config static-flow."
	::= { hwMCMibGroups 26 }


hwBtvSystemGroup OBJECT-GROUP
       OBJECTS {                                  
                hwBtvEnabled
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of enable Btv function."                                   
        ::= { hwMCMibGroups 27 }	

hwMcastGroupGroup OBJECT-GROUP
       OBJECTS {               
                hwMcastGroupName,
                hwMcastGroupAddress,                   
                hwMcastGroupRowStatus,
                hwMcastSourceAddress
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of multicast-group."                                   
        ::= { hwMCMibGroups 28 }
        
hwMcastListGroup OBJECT-GROUP
       OBJECTS {
                hwMcastListName,                                  
                hwMcastListRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of multicast-list."                                   
        ::= { hwMCMibGroups 29 }       
        
hwMcastProfileGroup OBJECT-GROUP
       OBJECTS {
                hwMcastProfileName,                                  
                hwMcastProfileRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of multicast-profile."                                   
        ::= { hwMCMibGroups 30 }          
        
hwMcastProfileCfgGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMcastProfileCfgPreviewTimes,
                hwMcastProfileCfgPreviewMinute,
                hwMcastProfileCfgPreviewInterval,
                hwMcastProfileCfgMaxNumProgram
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of config multicast-profile."                                   
        ::= { hwMCMibGroups 31 }        
        
hwMcastListReferGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMcastListReferRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of multicast-list refers to multicast-group."                                   
        ::= { hwMCMibGroups 32 }        
        
hwMcastProfileReferGroup OBJECT-GROUP
       OBJECTS {
                hwMcastPreviewStatus,                                  
                hwMcastProfileReferRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of multicast-profile refers to multicast-list."                                   
        ::= { hwMCMibGroups 33 }        
        
hwVlanApplyProfileGroup OBJECT-GROUP
       OBJECTS {
                hwVlanApplyProfileRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of vlan attach multicast-profile."                                   
        ::= { hwMCMibGroups 34 }
        
hwPortGroupPolicyGroup OBJECT-GROUP
       OBJECTS {                                  
                hwPortGroupPolicyAclNumber,
                hwPortGroupPolicyVersion,
                hwPortGroupPolicyRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of port group policy."                                   
        ::= { hwMCMibGroups 35 }   
        
hwMldSnpgSystemInfoGroup OBJECT-GROUP
       OBJECTS {
                hwMldSnoopingEnabled,
                hwMldSendQueryEnabled,
                hwMldSendQuerySourceIpAddr,
                hwMldSnoopingSuppressionTime
               }
        STATUS current
        DESCRIPTION
            "The group of MLD snooping system information."
        ::= { hwMCMibGroups 36 }   
        
hwMldVlanCfgGroup OBJECT-GROUP
       OBJECTS {
                hwVlanMldSnoopingEnabled,
                hwMldVlanRouterAgingTime,
                hwMldVlanMaxQueryRespTime,
                hwMldVlanLastListenerQueryInt,
                hwMldVlanQueryInt,
                hwMldVlanRobustCount,
                hwMldVlanCheckRouterAlert,
                hwMldVlanSendRouterAlert,
                hwVlanMldVersion,
                hwMldVlanPromptLeaveEnable,
                hwMldVlanPromptLeaveAclNum,
                hwMldVlanDropUnknown
               }
        STATUS current
        DESCRIPTION
            "The group of MLD vlan configuration."
        ::= { hwMCMibGroups 37 }  
        
hwMldSystemStatisticsGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldSystemRecvVlanUpEventTimes,
                hwMldSystemRecvVlanDownEventTimes,
                hwMldSystemRecvVlanDelEventTimes,
                hwMldSystemRecvPortUpEventTimes,
                hwMldSystemRecvPortDownEventTimes,
                hwMldSystemRecvPortDelEventTimes,
                hwMldSystemRecvPortIncEventTimes,
                hwMldSystemRecvPortExcEventTimes,
                hwMldSystemRecvMstpBlockEventTimes,
                hwMldSystemRecvMstpForwardEventTimes,
                hwMldSystemSysClearStats,
                hwMldSystemPacketClearStats,
                hwMldSystemRecvLinkChangeEventTimes
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD system statistics."                                   
        ::= { hwMCMibGroups 38 }
        
hwMldVlanStatisticsGroup OBJECT-GROUP
       OBJECTS {                                  
                hwVlanRecvMldV1ReportNum,        
                hwVlanRecvMldV2ReportNum,       
                hwVlanRecvMldDoneNum,           
                hwVlanRecvMldV1QueryNum,         
                hwVlanRecvMldV2QueryNum,
                hwVlanRecvIpv6PimHelloNum,            
                hwVlanSendMldQueryNum,               
                hwVlanMldPacketClearStats,
                hwVlanSendSourceIpSpecMldQueryNum       
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD vlan statistics."                                   
        ::= { hwMCMibGroups 39 }  
        
hwMldIpGrpInfoGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldIpGrpUpTime,
                hwMldIpHostUpTime,
                hwMldIpHostExpires,
                hwMldIpHostFlag,
                hwMldIpRtUpTime,
                hwMldIpRtExpires,
                hwMldIpRtFlag   
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD IP group information."                                   
        ::= { hwMCMibGroups 40 } 
        
hwMldPortStaticGrpGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldPortStaticGrpRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD port static group."                                   
        ::= { hwMCMibGroups 41 } 
        
hwMldGrpPolicyCfgGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldGrpPolicyAclNum,
                hwGrpPolicyMldVersion,
                hwMldGrpPolicyRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD group policy configuration."                                   
        ::= { hwMCMibGroups 42 }
        
hwMldRouterPortInfoGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldRouterPortUpTime,
                hwMldRouterPortExpires,
                hwMldRouterPortFlag
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of router port information."                                   
        ::= { hwMCMibGroups 43 }
        
hwMldRouterPortCfgGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldRouterPortCfgRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of router port configuration."                                   
        ::= { hwMCMibGroups 44 }
        
hwMldPortLimitGroup OBJECT-GROUP
       OBJECTS {
                hwMldPortLimitNumber,                                  
                hwMldPortLimitRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD port limit."                                   
        ::= { hwMCMibGroups 45 } 
        
hwMldPortGroupPolicyGroup OBJECT-GROUP
       OBJECTS {                                  
                hwMldPortGroupPolicyAclNumber,
                hwMldPortGroupPolicyVersion,
                hwMldPortGroupPolicyRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of MLD port group policy."                                   
        ::= { hwMCMibGroups 46 } 
        
hwMcSourceDenyGroup OBJECT-GROUP
       OBJECTS {
                hwMcSourceDenyRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of multicast source deny."                                   
        ::= { hwMCMibGroups 47 } 
        
hwMVlanIpv6StaticFlowGroup OBJECT-GROUP
	OBJECTS { 
		hwMVlanIpv6StaticFlowRowStatus
		}
	STATUS current
	DESCRIPTION 
		"The group of multicast vlan config IPv6 static-flow."
	::= { hwMCMibGroups 48 }
	
hwMcastIpv6GroupGroup OBJECT-GROUP
       OBJECTS {               
                hwMcastIpv6GroupName,
                hwMcastIpv6GroupAddress,                   
                hwMcastIpv6GroupRowStatus,
                hwMcastIpv6SourceAddress
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of IPv6 multicast-group."                                   
        ::= { hwMCMibGroups 49 }
        
hwExternIpGrpInfoGroup OBJECT-GROUP
       OBJECTS {               
                hwExternIpGrpUpTime,
                hwExternIpHostUpTime,
                hwExternIpHostExpires,
                hwExternIpHostFlag,
                hwExternIpRtUpTime,
                hwExternIpRtExpires,
                hwExternIpRtFlag
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of externed IP group information."                                   
        ::= { hwMCMibGroups 50 }
        
hwExternPortStaticGrpGroup OBJECT-GROUP
       OBJECTS {                                  
                hwExternPortStaticGrpRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of externed port static group."                                   
        ::= { hwMCMibGroups 51 } 
        
hwPortVlanLimitGroup OBJECT-GROUP
       OBJECTS {                                  
                hwPortVlanLimitNumber,
                hwPortVlanLimitRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of port vlan limit."                                   
        ::= { hwMCMibGroups 52 } 
        
hwExternMVlanStaticFlowGroup OBJECT-GROUP
       OBJECTS {                                  
                hwExternMVlanStaticFlowRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of extern multicast vlan config static-flow."                                   
        ::= { hwMCMibGroups 53 }
        
hwExternVlanApplyProfileGroup OBJECT-GROUP
       OBJECTS {
                hwExternVlanApplyProfileRowStatus
               }                                  
        STATUS current                            
        DESCRIPTION                               
            "The group of extern vlan attach multicast-profile."                                   
        ::= { hwMCMibGroups 54 }

hwMcastAlarmGroup NOTIFICATION-GROUP   
       NOTIFICATIONS {                  
                hwCfgRefreshFailAlarm,
                hwMCastTableLoadAbnormalNotify,
                hwMCastTableLoadAbnormalResume,
                hwMCastVlanFailAlarm,
                hwMCastVlanOkNotify,
                hwMCastApsSwitchAlarm,
                hwMCastApsIdleNotify,
                hwL2mcCacGlobalCountExceed,
                hwL2mcCacGlobalBandwidthExceed,
                hwL2mcCacGlobalChannelCountExceed,
                hwL2mcCacGlobalChannelBandwidthExceed,
                hwL2mcCacVlanCountExceed,
                hwL2mcCacVlanBandwidthExceed,
                hwL2mcCacVlanChannelCountExceed,
                hwL2mcCacVlanChannelBandwidthExceed,
                hwL2mcCacVsiCountExceed,
                hwL2mcCacVsiBandwidthExceed,
                hwL2mcCacVsiChannelCountExceed,
                hwL2mcCacVsiChannelBandwidthExceed,
                hwL2mcCacPortCountExceed,
                hwL2mcCacPortBandwidthExceed,
                hwL2mcCacPortChannelCountExceed,
                hwL2mcCacPortChannelBandwidthExceed,
                hwL2mcCacPortVlanCountExceed,
                hwL2mcCacPortVlanBandwidthExceed,
                hwL2mcCacPortVlanChannelCountExceed,
                hwL2mcCacPortVlanChannelBandwidthExceed,
                hwL2mcCacSubIfCountExceed,
                hwL2mcCacSubIfBandwidthExceed,
                hwL2mcCacSubIfChannelCountExceed,
                hwL2mcCacSubIfChannelBandwidthExceed,
                hwL2mcCacLdpPwCountExceed,
                hwL2mcCacLdpPwBandwidthExceed,
                hwL2mcCacLdpPwChannelCountExceed,
                hwL2mcCacLdpPwChannelBandwidthExceed,
                hwL2mcCacBgpPwCountExceed,
                hwL2mcCacBgpPwBandwidthExceed,
                hwL2mcCacBgpPwChannelCountExceed,
                hwL2mcCacBgpPwChannelBandwidthExceed,             
                hwL2mcCacVlanUnspecifiedChannelDeny,
                hwL2mcCacVsiUnspecifiedChannelDeny,
                hwL2mcCacGlobalUnspecifiedChannelDeny         
               }                  
        STATUS current            
        DESCRIPTION               
            "."                   
        ::= { hwMCMibGroups 99 }       
END