path: root/MIBS/hp/HP-SYSTEM-MIB

HP-SYSTEM-MIB DEFINITIONS ::= BEGIN

    IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Gauge32, IpAddress,
	NOTIFICATION-TYPE, Unsigned32, 
	Integer32					FROM SNMPv2-SMI
	TEXTUAL-CONVENTION, TruthValue, 
	DisplayString				FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP,
	NOTIFICATION-GROUP                  	FROM SNMPv2-CONF
	hpProcurveCommon                  	    FROM HP-BASE-MIB;

    hpProcurveSystem MODULE-IDENTITY
	LAST-UPDATED 	"200502011455Z"
	ORGANIZATION "Hewlett Packard Company,
                     ProCurve Networking Business"
	CONTACT-INFO "Hewlett Packard Company
                     8000 Foothills Blvd.
                     Roseville, CA 95747"
        DESCRIPTION  "This MIB module describes objects for basic
		     management of  devices in the HP Procurve
                     product line."
    REVISION     "200502011455Z"  -- February 1, 2005
    DESCRIPTION  "Modified to reflect new OID hierarchy for 
                  HP J8162A XL Access Controller Module." 		
                    
	::= { hpProcurveCommon 1 }

hpProcurveSysMib OBJECT IDENTIFIER ::= { hpProcurveSystem 1 }
hpSystemMIBObjects OBJECT IDENTIFIER ::= { hpProcurveSystem 2 }
    
hpConfig OBJECT IDENTIFIER                ::= {  hpSystemMIBObjects 1 }
hpStatus  OBJECT IDENTIFIER                ::= {  hpSystemMIBObjects 2 }
hpNotificationsConfig  OBJECT IDENTIFIER  ::= {  hpSystemMIBObjects 3 }

    
-- System objects
    hpProductDescription OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Textual Description of the HW product"
	::= { hpProcurveSysMib 1 }

    hpProductHWVersion OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"HW version of the product"
	::= { hpProcurveSysMib 2 }
      
    hpProductSWVersion OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"SW version of the product"
	::= { hpProcurveSysMib 3 }   

    hpProductSerialNumber OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Serial Number of the product"
	::= { hpProcurveSysMib 4 }


    hpProductLastChange OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Date and time of last configuration change"
	::= { hpProcurveSysMib 5 }

-- Environmental 
    hpCpuTemperature OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION 	"Current temperature in degrees centigrade 
			of the CPU."
	::= { hpProcurveSysMib 6 }

    hpPowerSupplyTemperature OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		deprecated
	DESCRIPTION 	"Current temperature in degrees centigrade 
			of the power supply."
	::= { hpProcurveSysMib 7 }

    hpChassisTemperature OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION 	"Current temperature in degrees centigrade 
                        of the mother board. Note: this is not the
                        ambient temperature of the box."
	::= { hpProcurveSysMib 8 }

    hpFanStatusTable OBJECT-TYPE
	SYNTAX 		SEQUENCE OF HpFanStatusEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION 	"Table of operational status of all internal 
			cooling fans."
	::= { hpProcurveSysMib 9 }

    hpFanStatusEntry OBJECT-TYPE
	SYNTAX		HpFanStatusEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Entry in table of all internal cooling fans."
	INDEX		{ hpFanNumber }
	::= { hpFanStatusTable 1 }

    HpFanStatusEntry ::=
        SEQUENCE { 
	    hpFanNumber 	INTEGER,
	    hpFanOperational 	INTEGER,
	    hpFanSpeed	 	Integer32
	}

    hpFanNumber OBJECT-TYPE
	SYNTAX		INTEGER { cpu(1),power(2) }
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Identifier of cooling fan, numbered to represent what 
			hardware the fan is supposed to be cooling."
	::= { hpFanStatusEntry 1 }

    hpFanOperational OBJECT-TYPE
	SYNTAX		INTEGER { true(1),false(2) }
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Operational status of a cooling fan."
	::= { hpFanStatusEntry 2 }

    hpFanSpeed OBJECT-TYPE
	SYNTAX		Integer32 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Speed of the fan in RPM."
	::= { hpFanStatusEntry 3 }

	-- hpConfig group
-- Additional information relating to the configuration of the HP ProCurve Networking 
-- Business Device


hpName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "A textual string containing information about the
            device.  For instance, this string reflects the setting of
            the HP J8162A XL Access Controller Module Name available on the Administrative 
            Web based User Interface.  If no HP J8162A XL Access Controller Module name
            is entered, this object contains a zero-length string."
    ::= { hpConfig 2 }

hpSystemID OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The unique identifier for this device, as used by
            this system, or a master controlling system.  For instance, an
            HP J8162A XL Access Controller Module would report the systemID used by the
	        Access Control Server 740wl to uniquely identify this device."
    ::= { hpConfig 3 }


hpState OBJECT-TYPE
    SYNTAX  INTEGER {
                unknown(1),
                up(2),       -- ready to pass packets
                down(3),
                primary(4),  -- for Failover operation    
                secondary(5) -- for Failover operation 
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The current state of the device. A HP ProCurve Networking Business 
	    device can be configured for standalone operation, 
	    Failover (ie with a redundant peer), or for Distribution 
	    of configuration from a controlling central system to 
	    remote entities. 
                 unknown(1)    - system Configuration status unknown
                 up(2)         - a standalone system is operational.
                 down(3)       - a system is not operational.
                 primary(4)    - system is running as the primary in
                                 a Failover peer configuration.
                 secondary(5)  - system is running as the backup in
                                 a Failover peer configuration."
    ::= { hpConfig 4 }

hpDistributionType OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
    SYNTAX  INTEGER {
                unknown(1),
                rightsPush(2)   -- push central rights to remote systems.
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The most recent distribution event type on a device.  
             This object will change dynamically based on
             the most recently triggered distribution event.
                 unknown(1)    - the distribution event type
                 none(2)       - no distribution event has occurred
                 rightsPush(3) - the central Access Control Server 740wl 
		 has triggered a rights push event to remote Access Control Server
		 740wls."
    ::= { hpConfig 5 }

hpDistributionStatus OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
    SYNTAX  INTEGER {
                unknown(1),
                succeeded(2),   
                failed(3)   
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The most recent distribution event on a device.  
             This object will change dynamically based on
             the most recently triggered distribution event.
                 unknown(1)    - the distribution event status unknown
                 succeeded(2)  - no distribution event has succeeded
                 failed(3) - the distribution event failed for some reason."
    ::= { hpConfig 6 }

hpIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The administratively assigned IP address associated with the 
             device.  This can be assigned statically on the
             device Console port, or configured via DHCP."
    ::= { hpConfig 7 }

hpPeerIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The administratively assigned IP address associated with a 
            redundant peer device, configured to work with this device 
            for failover purposes.  This can be assigned statically on the
            device Console port, or configured via DHCP.  If the device 
            does not support Failover configuration, or none has been 
            configured, this object will report 0.0.0.0"
    ::= { hpConfig 8 }

hpTechSupportEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object contains the current setting for the technical
             support access to the device.  A value of true(1) 
             indicates the Technical Support Access has been enabled. A value
             of false(2) indicates this access has been disabled.  Note 
             this object should only report true(2) if HP ProCurve Networking 
	     Business Technical Support staff have requested this access 
	     to the HP J8162A XL Access Controller Module for troubleshooting purposes."
    DEFVAL      { false }

    ::= { hpConfig 9 }

hpFailedAdminIpAddress OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The IP address associated with the last failed
	    authentication to the Administrative UI. If no Administrator
             had failed authentication, this object will report 0.0.0.0"
    ::= { hpConfig 10 }

-- hpStatus

hpNumAccessControllers  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of HP J8162A XL Access Controller Modules known to this system.  
	    If this system is an HP J8162A XL Access Controller Module, this value will be 1.
	    Otherwise, this value will be the number of HP J8162A XL Access Controller Modules
	    this system is connected to (i.e. An Access Control Server 740wl
	    connects to multiple HP J8162A XL Access Controller Module's)."
    ::= { hpStatus 1 }

hpNumClients  OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The total number of active authenticated or unauthenticated 
            clients known to this system. If this device is an 
            HP J8162A XL Access Controller Module, then this object reports 
            the aggregated number of clients across all ports. If this device
            is a Access Control Server 740wl, it reports all Clients aggregated
            across all HP J8162A XL Access Controller Modules known to this system."
    ::= { hpStatus 2 }


-- hpNotificationsConfig group
--  Configure system level notifications

hpFailoverNotificationEnabled OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
    SYNTAX 	TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object controls whether a hpFailover notification will 
            be sent in the event of a failover occurrence between a primary
	    and standby system. By default this object is set to false(2) 
            for all systems."
    ::= { hpNotificationsConfig 1 }

hpDistributionNotificationEnabled OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
    SYNTAX 	TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object controls whether a hpDistribution notification will 
            be sent in the event of a distribution event between a central
	    and remote systems. By default this object is set to false(2) 
            for all systems."
   DEFVAL      { false }
    ::= { hpNotificationsConfig 2 }


hpAdminAuthFailureNotificationEnabled OBJECT-TYPE
-- NOT CURRENTLY SUPPORTED - will report dummy values
   SYNTAX 	TruthValue
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
            "This object controls whether a hpAdminAuthFailure 
	    notification will be sent in the event of a failed 
	    authentication attempt at the administrator login."
   DEFVAL      { false }
    ::= { hpNotificationsConfig 3 }


-- Traps
    hpSystemTraps OBJECT IDENTIFIER ::= { hpProcurveSystem 0 }

    fanDown	NOTIFICATION-TYPE
	OBJECTS		{ hpFanNumber }
	STATUS		current
	DESCRIPTION	"A fanDown trap signifies that hpFanOperational has
			detected an event where the fan is not operating."
	::= { hpSystemTraps 1 }

    fanUp NOTIFICATION-TYPE
	OBJECTS		{ hpFanNumber }
	STATUS		current
	DESCRIPTION 	"A fanUp trap signifies that hpFanOperational has
			detected an event where the fan is now operating."
	::= { hpSystemTraps 2 }

    temperatureAlarm NOTIFICATION-TYPE
	OBJECTS		{ hpCpuTemperature }
	STATUS		current
	DESCRIPTION 	"A temperatureAlarm signifies that the SNMP 
			entity, acting in an agent role, has detected that the 
			hpCpuTemperature has a value that exceeds acceptable
			tolerances (i.e. it is too hot or too cold)."
	::= { hpSystemTraps 3 }
	
hpFailover NOTIFICATION-TYPE
	OBJECTS		{ hpIpAddress}
	STATUS		current
	DESCRIPTION 
		"A hpFailover signifies that the SNMP 
		entity, acting in an agent role, has detected that the 
		standby system in a primary, redundant operation has
                become the primary system. This notification will only
                be sent by what was formerly the standby system."  
       ::= { hpSystemTraps 4 }

hpDistributionEvent NOTIFICATION-TYPE
-- NOT CURRENTLY SUPPORTED 
	OBJECTS		{ hpDistributionType, hpDistributionStatus}
	STATUS		current
	DESCRIPTION 
		"A hpDistributionEvent signifies that the SNMP 
		entity, acting in an agent role, has detected that the 
		central entity in a distributed system has triggered a
                distribution event of hpDistributionType."
       ::= { hpSystemTraps 5 }


hpAdminAuthFailure NOTIFICATION-TYPE
-- NOT CURRENTLY SUPPORTED 
	OBJECTS		{ hpFailedAdminIpAddress}
	STATUS		current
	DESCRIPTION 
		"A hpAdminAuthFailure signifies that the SNMP 
		entity, acting in an agent role, has detected that 
		someone at the address reported by hpAdminIpAddress
                has failed to authenticate to the device via
                the administrative interface."
   
	::= { hpSystemTraps 6 }


-- conformance information

hpSystemMIBConformance OBJECT IDENTIFIER ::= {  hpProcurveSystem 3 }
hpCompliances OBJECT IDENTIFIER ::= { hpSystemMIBConformance 1 }
hpGroups OBJECT IDENTIFIER ::=      { hpSystemMIBConformance 2 }


hpSystemMIBCompliance1  MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for entities which implement
                the HP-SYSTEM-MIB."
        MODULE  -- this module
                MANDATORY-GROUPS { hpSystemGroup, hpConfigGroup }

        GROUP hpEnvGroup
        DESCRIPTION
                "The hpEnvGroup is optional for all entities."

        GROUP hpStatusGroup
        DESCRIPTION
                "The hpStatusGroup is optional for all entities."


        GROUP hpNotificationsConfigGroup
        DESCRIPTION
                "The hpNotificationsConfigGroup is optional for all entities."

        GROUP hpNotificationsGroup
        DESCRIPTION
                "The hpNotificationsGroup is optional for all entities."

        OBJECT          hpName
        MIN-ACCESS      read-only
        DESCRIPTION     "Write access is not required."

        OBJECT          hpIpAddress
        MIN-ACCESS      read-only
        DESCRIPTION     "Write access is not required."

        OBJECT          hpTechSupportEnabled
        MIN-ACCESS      read-only
        DESCRIPTION     "Write access is not required."

        OBJECT          hpFailoverNotificationEnabled
        MIN-ACCESS      read-only
        DESCRIPTION     "Write access is not required."

        OBJECT          hpDistributionNotificationEnabled
        MIN-ACCESS      read-only
        DESCRIPTION     "Write access is not required."

        OBJECT          hpAdminAuthFailureNotificationEnabled
        MIN-ACCESS      read-only
        DESCRIPTION     "Write access is not required."

        ::= { hpCompliances 1 }

-- units of conformance

hpSystemGroup    OBJECT-GROUP
    OBJECTS { hpProductDescription, hpProductHWVersion, hpProductSWVersion,
              hpProductSerialNumber, hpProductLastChange }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing system information 
            applicable to all devices."
    ::= { hpGroups 1 }

hpEnvGroup    OBJECT-GROUP
    OBJECTS { hpCpuTemperature, hpPowerSupplyTemperature, hpChassisTemperature,
              hpFanNumber, hpFanOperational, hpFanSpeed } 
    STATUS  current
    DESCRIPTION
            "A collection of objects providing environmental information 
            applicable to all devices."
    ::= { hpGroups 2 }

hpConfigGroup    OBJECT-GROUP
    OBJECTS { hpName, hpSystemID, hpState, hpIpAddress, hpPeerIpAddress,
              hpTechSupportEnabled, hpDistributionType, hpDistributionStatus,
              hpFailedAdminIpAddress } 
    STATUS  current
    DESCRIPTION
            "A collection of objects providing configuration information 
            applicable to all devices."
    ::= { hpGroups 3 }


hpStatusGroup    OBJECT-GROUP
    OBJECTS { hpNumAccessControllers, hpNumClients }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing statistics
            applicable to all HP J8162A XL Access Controller Module like devices."
    ::= { hpGroups 4 }

hpNotificationsConfigGroup    OBJECT-GROUP
    OBJECTS { hpFailoverNotificationEnabled, 
              hpDistributionNotificationEnabled,
              hpAdminAuthFailureNotificationEnabled }
    STATUS  current
    DESCRIPTION
            "A collection of objects providing notification configuration 
            information applicable to all devices."
    ::= { hpGroups 5 }

hpNotificationsGroup    NOTIFICATION-GROUP
    NOTIFICATIONS { fanDown, fanUp, temperatureAlarm,
                    hpFailover, hpDistributionEvent, hpAdminAuthFailure }
    STATUS  current
    DESCRIPTION
            "notifications for primary failover, and authorization failures,
            applicable to all devices."
    ::= { hpGroups 6 }


		
END