path: root/MIBS/hp/HP-SN-SWITCH-GROUP-MIB

HP-SN-SWITCH-GROUP-MIB DEFINITIONS ::= BEGIN


-- Foundry SnSwitch Group MIB Release 2.0.0
-- Revision 0 08/18/96

-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- SECTION 1: Top Level Definitions


-- Imports

IMPORTS
	Counter, TimeTicks, IpAddress, Gauge
		FROM RFC1155-SMI
	Unsigned32
		FROM SNMPv2-SMI
	OBJECT-TYPE
		FROM RFC-1212
	snSwitch
		FROM HP-SN-ROOT-MIB;

		-- textual conventions

	  DisplayString ::=
	      OCTET STRING
	  -- This data type is used to model textual information taken
	  -- from the NVT ASCII character set.  By convention, objects
	  -- with this syntax are declared as having
	  --
	  --      SIZE (0..255)

	  PhysAddress ::=
	      OCTET STRING
	  -- This data type is used to model media addresses.  For many
	  -- types of media, this will be in a binary representation.
	  -- For example, an ethernet address would be represented as
	  -- a string of 6 octets.

	  MacAddress ::=
	      OCTET STRING (SIZE(6))
	  -- This data type is used to model media addresses.  For many
	  -- types of media, this will be in a binary representation.
	  -- For example, an ethernet address would be represented as
	  -- a string of 6 octets.

      BridgeId ::= OCTET STRING (SIZE(8))  
      -- the Bridge-Identifier as used in the Spanning Tree

      Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds

	  PortMask ::=
		  INTEGER
	  -- This data type is used to model port bitmask.  The 
	  -- maximum of ports are 32.  

      InterfaceId ::= OBJECT IDENTIFIER
	  -- This data type is used to specify an interface ID.
	  -- The first object identifier is port type, and the
	  -- format of the rest of the object identifiers depend
	  -- on the port type.
	  --
	  -- ethernet(1), format: type.slot.port
	  --   e.g. 1.3.6 is port ethernet 3/6
	  --
	  -- pos(2), format: type.slot.port
	  --   e.g. 2.10.1 is port pos 10/1
	  --
	  -- atm(3), format: type.slot.port
	  --   e.g. 3.8.2 is port atm 8/2
	  --
	  -- virtual router interface(4), format: type.ve
	  --   e.g. 4.9 is port ve 9
	  --
	  -- loopback(5), format: type.lb
	  --   e.g. 5.7 is port loopback 7
	  --
	  -- gre tunnel(6), format: type.tn, not supported
	  --
	  -- subinterface(7), format: type.slot.port.subInterface
	  --   e.g. 7.3.2.4 is port atm 3/2.4
	  --
	  -- mpls tunnel(8), format: type.tn
	  --   e.g. 8.3 is port tunnel 3
	  --
	  -- pvc(9), format: type.slot.port.subInterface.vpi.vci
	  --   e.g. 9.3.1.2.1.2 is port atm 3/1.2.1.2

-- Groups

snSwInfo 	            OBJECT IDENTIFIER ::= { snSwitch 1 }
snVLanInfo				OBJECT IDENTIFIER ::= { snSwitch 2 }
snSwPortInfo 	  		OBJECT IDENTIFIER ::= { snSwitch 3 }
snFdbInfo				OBJECT IDENTIFIER ::= { snSwitch 4 }
snPortStpInfo			OBJECT IDENTIFIER ::= { snSwitch 5 }
snTrunkInfo				OBJECT IDENTIFIER ::= { snSwitch 6 }
snSwSummary				OBJECT IDENTIFIER ::= { snSwitch 7 }
snDhcpGatewayListInfo	OBJECT IDENTIFIER ::= { snSwitch 8 }
snDnsInfo				OBJECT IDENTIFIER ::= { snSwitch 9 }
snMacFilter				OBJECT IDENTIFIER ::= { snSwitch 10 }
snNTP					OBJECT IDENTIFIER ::= { snSwitch 11 }
snRadius				OBJECT IDENTIFIER ::= { snSwitch 12 }
snTacacs				OBJECT IDENTIFIER ::= { snSwitch 13 }
snQos					OBJECT IDENTIFIER ::= { snSwitch 14 }
snAAA					OBJECT IDENTIFIER ::= { snSwitch 15 }
snCAR 					OBJECT IDENTIFIER ::= { snSwitch 16 }
snVLanCAR 				OBJECT IDENTIFIER ::= { snSwitch 17 }
snNetFlow 				OBJECT IDENTIFIER ::= { snSwitch 18 }
snSFlow 				OBJECT IDENTIFIER ::= { snSwitch 19 }
snFDP 				    OBJECT IDENTIFIER ::= { snSwitch 20 }
snVsrp   				OBJECT IDENTIFIER ::= { snSwitch 21 }

-- SECTION 2: Switch Group Configuration MIBs


snSwGroupOperMode OBJECT-TYPE
	SYNTAX  INTEGER {
		noVLan(1),
	    vlanByPort(2)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"noVLan(1) represents all switch ports with no virtual 
		 LAN by port (no Port VLAN), and with no tag assigned.
		 vlanByPort(2) represents all switch ports with Basic 
		 VLAN (layer2 Switch). "
	::= { snSwInfo 1 }

snSwGroupIpL3SwMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),             
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Group is configured with the Layer3
		 IP Switch mode either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate Layer3 IP Switch
		 disabled(0)..........disable Layer3 IP Switch"  
	::= { snSwInfo 2 }


snSwGroupIpMcastMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Group is configured with the IP Multicast
		 pruning mode either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate IP Multicast pruning
		 disabled(0)..........no IP Multicast pruning"
	::= { snSwInfo 3 }


snSwGroupDefaultCfgMode OBJECT-TYPE
	SYNTAX  INTEGER {
		default(1),
		nonDefault(2)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Group is configured with the Default
		 configuration. If the default configuration gets
		 overwritten, the state will change to non-default.
		 default(1)...........default configuration
		 nonDefault(2)..........non default configuration"
	::= { snSwInfo 4 }


snSwGroupSwitchAgeTime OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Age time is 180sec by default.
		 The configured range is 10 to 10,000sec.  The time
		 represents the time span to age out an MAC Address
		 entry."
	::= { snSwInfo 5 }



snVLanGroupVlanCurEntry OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The current total entry number of VLANs are configured." 
	::= { snSwInfo 6 }


snVLanGroupSetAllVLan OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The value of this object is the VLanIndex of a particalur
		 entry in snVLanByPortTable (snVLanByPortVLanIndex).  
		 All the attributes of that row of table except PortMask
		 will be used to set the same attributes for the 
		 entire VLan group. VLanId and PortMask must be set for 
                 that particular entry prior to setting this object.
		 Switch software will base on that VLAN information
		 to set the entire VLAN.   
		 Note: All the intended attributes of the given 
		 row of the table (given VLAN) must be set prior
		 setting this object.  When this object is set,
		 Set-All-VLAN action will take place simultaneously.
		 The previous setting will be overwritten by the 
		 new one."
	::= { snSwInfo 7 }


snSwPortSetAll OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The value of this object is the index number of the
		 snSwPortInfoTable (snSwPortInfoPortIndex).  
		 snSwPortInfoMonitorMode, snSwPortInfoTagMode, 
		 snSwPortInfoChnMode, snSwPortInfoSpeed,
		 snSwPortInfoAdminStatus are all the
		 read-write attributes of that row of table.
		 They will be used to set the same attributes for
		 all the ports in the system.
		 Note: prior setting this object, all the intended 
		 attributes of the given row of the table must be set.  
		 Otherwise, the current data of the row will be used to 
		 set the entire port-table. The previous setting will
		 be overwritten by the new one." 
	::= { snSwInfo 8 }



snFdbTableCurEntry OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The current total entry number of FDB are configured." 
	::= { snSwInfo 9 }


snFdbTableStationFlush OBJECT-TYPE
	SYNTAX  INTEGER {
	    normal(1),
        error(2),
        flush(3),
        flushing(4)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The following values of the flush state
		 can only be read:
		  normal(1)... normal state
		  error(2)... operation failed
		  flushing(4)... in process

		The following value can be written:
		  flush(3).....do flush 

		The agent will return a response even before the flush is done.
		And the read value will be flushing until flush is done.
		And the flush request will be rejected until error or normal."
	::= { snSwInfo 10 }


snPortStpSetAll OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The value of this object is 1 which means invoking
                 Port STP Set-all command.  The snPortStpPriority, 
                 snPortStpPathCost, the read-write STP related 
                 attributes of the first row of table will be used 
                 to set the same attributes for all the ports in the 
                 system. 
		 Note: prior setting this object, all the intended 
		 attributes of the given row of the table must be set.  
		 Otherwise, the current data of the row will be used to 
		 set the entire port-table. The previous setting will
		 be overwritten by the new one." 
	::= { snSwInfo 11 }


snSwProbePortNum OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A chassis switch probe port is operated as a traffic analyzer
		 port and only one port can be assigned in the chassis.
		 The bit 0 to bit 7: port number. 
		 The bit 8 to bit 11: slot number.
		 A stackable switch is only assigned with one probe port as a 
		 traffic analyzer."
	::= { snSwInfo 12 }


snSw8021qTagMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Group is configured with the IEEE802.1q
		 Tagging mode either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate IEEE802.1q Tagging mode.
		 disabled(0)..........no IEEE802.1q Tagging."
	::= { snSwInfo 13 }


snSwGlobalStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)       
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Spanning Tree System Global Mode in the Switch Group 
		 can be set either enabled or disabled and the default is 
		 enabled mode.
		 enabled(1)...........activate Spanning Tree
		 disabled(0)..........no Spanning Tree"
	::= { snSwInfo 14 }


snSwIpMcastQuerierMode OBJECT-TYPE
	SYNTAX  INTEGER {
		querier(1),
		nonQuerier(2)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The IP Multicast pruning mode is configured either 
		 Non-Querier or Querier mode and the default is 
		 querier mode.
		 querier(1)...........when prunning traffic locally 
		                      within the VLAN.
		 nonQuerier(2)........when running with a multicast 
		                      capable router in the network."
	::= { snSwInfo 15 }

snSwViolatorPortNumber OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS  read-only
	STATUS	mandatory
	DESCRIPTION
		"The port number of the switch or router that received
		 a violator packet. It is included in the locked
		 address violation trap.
		 The bit 0 to bit 7: port number. 
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snSwInfo 17 }

snSwViolatorMacAddress OBJECT-TYPE
    SYNTAX  MacAddress
	ACCESS  read-only
	STATUS	mandatory
	DESCRIPTION
		"The source address of the violator packet received
		 by the switch or router. It is included in the locked
		 address violation trap."
	::= { snSwInfo 18 }

snVLanGroupVlanMaxEntry OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of VLAN entries are allowed to configure."
	::= { snSwInfo 19 }

snSwEosBufferSize OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"A specific buffer size for all the different EOS buffers."
	::= { snSwInfo 20 }

snVLanByPortEntrySize OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		 "The size of each VLAN table entry."
	::= { snSwInfo 21 }

snSwPortEntrySize OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		 "The size of each port table entry."
	::= { snSwInfo 22 }

snFdbStationEntrySize OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		 "The size of each Fdb station table entry."
	::= { snSwInfo 23 }

snPortStpEntrySize OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		 "The size of each port stp table entry."
	::= { snSwInfo 24 }

snSwEnableBridgeNewRootTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate bridge new root traps."
    DEFVAL { enabled }
	::= { snSwInfo 25 }

snSwEnableBridgeTopoChangeTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate bridge topology change
		traps."
    DEFVAL { enabled }
	::= { snSwInfo 26 }

snSwEnableLockedAddrViolationTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate locked address violation
		traps."
    DEFVAL { enabled }
	::= { snSwInfo 27 }

snSwIpxL3SwMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),             
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Group is configured with the Layer3
		 IPX Switch mode either enabled or disabled and 
		 the default is disabled mode.
		 enabled(1)...........activate Layer3 Switch
		 disabled(0)..........disable Layer3 Switch"  
	::= { snSwInfo 28 }

snVLanByIpSubnetMaxSubnets OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of subnets for each IP VLAN."
	::= { snSwInfo 29 }

snVLanByIpxNetMaxNetworks OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of networks for each IPX VLAN."
	::= { snSwInfo 30 }

snSwProtocolVLanMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
	    enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"disabled(0) - represents system with Protocol VLAN disabled. 
		 enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN)."
	::= { snSwInfo 31 }

snMacStationVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table.
		 (dot1dTpFdbTable).  Since the dot1dTpFdbTable index is the MAC Address assigned to one of 
		 the ports in the bridge(VLAN) and each MAC address can be re-assigned to a different
		 ports belonging to different bridges(VLANs), the snMacStationVLanId can be used by
		 users to specify which bridge(VLAN) MAC Station information of the dot1dTpFdbTable 
		 users want to retrieve.  If users do not specify the VLan ID in this MIB, the default
		 VLAN (bridge) ID will be used when dot1dTpFdbTable is retrieved."
	::= { snSwInfo 32 }

snSwClearCounters OBJECT-TYPE
	SYNTAX  INTEGER {
		valid(0),
	    clear(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"valid(0) - a SNMP-GET of this mib shows that it is valid command to use. 
		 clear(1) - represents clear counter command of the following counters:
		 			Dot3, MIB2, IP and IPX counters for all ports."
	::= { snSwInfo 33 }

snSw8021qTagType OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The IEEE802.1q tag type embedded in the length/type field of
		an Ethernet packet. It specifies that the 2 octets after the
		length/type field in an Ethernet packet is the tag value."
    DEFVAL { 33024 }
	::= { snSwInfo 34 }

snSwBroadcastLimit OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Limit the number of broadcast packets to forward out of the
		switch ports. This object specifies the number of broadcast
		packets per second. Setting a value of 0 to this object
		disables the limitation check."
    DEFVAL { 0 }
	::= { snSwInfo 35 }

snSwMaxMacFilterPerSystem  OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of MAC Filters per system in the MAC Filter table."
	::= { snSwInfo 36 }

snSwMaxMacFilterPerPort  OBJECT-TYPE
	SYNTAX  INTEGER 
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The maximum number of MAC Filters per port in the Port MAC Access Filter table."
	::= { snSwInfo 37 }

snSwDefaultVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID of the DEFAULT PORT-VLAN."
	::= { snSwInfo 38 }

snSwGlobalAutoNegotiate OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1),
		negFullAuto(2),
		other(3)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This feature only applies to Gigabit Ethernet ports. If set
		to disable(0), all Gigabit Ethernet ports will be put to non-
		negotiation mode. If set to enable(1), all Gigabit Ethernet
		ports will start auto-negotiation indefinitely until succeed.
		If set to negFullAuto(2), all Gigabit Ethernet ports will start
		with auto-negotiation, if the negotiation failed, then they
		will automatically switch to non-negotiation mode. Stackable
		products (except TurboIron 8) Gigabit Ethernet ports do not
		support negFullAuto(2). If the snSwPortInfoAutoNegotiate value
		of a port was not set to global, this global value does not
		apply to the negotiation mode of that port."
    DEFVAL { negFullAuto }
	::= { snSwInfo 39 }

snSwQosMechanism OBJECT-TYPE
	SYNTAX	INTEGER { strict(0), weighted(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Indicates whether the qos mechanism is
		 strict or weighted."
    DEFVAL { weighted }
	::= { snSwInfo 40 }

snSwSingleStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)       
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Single Spanning Tree System Mode in the Switch Group 
		 can be set either enabled or disabled and the default is 
		 disabled mode.
		 enabled(1)...........activate Single Spanning Tree
		 disabled(0)..........no Single Spanning Tree"
	::= { snSwInfo 41 }

snSwFastStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)       
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Fast Spanning Tree System Mode in the Switch Group 
		 can be set either enabled or disabled and the default is 
		 enabled mode.
		 enabled(1)...........activate Fast Spanning Tree
		 disabled(0)..........no Fast Spanning Tree"
	::= { snSwInfo 42 }


-- VLAN Layer 2 Switch VLAN By Port Information Table


snVLanByPortTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByPortEntry
	ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"If snSwGroupOperMode is configured as basic mode
		 which is VLAN by Port, Layer2 switching,
		 then this table is valid.  Each VLAN switch port
		 could have a number of VLAN IDs."
	::= { snVLanInfo 1 }


snVLanByPortEntry OBJECT-TYPE
	SYNTAX  SnVLanByPortEntry
	ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"An entry in the VLAN By Port Information table.
		 snVLanByPortVLanIndex = 1 and with 
		 snVLanByPortVLanId = 1 together implies all attributes
		 applying to the Global switch group i.e. noVLan.
		 A SNMP SET PDU for a row of the snVLanByPortTable 
		 requires the entired sequence of the MIB Objects in each 
		 snVLanByPortEntry stored in one PDU.  Otherwise, 
	 GENERR return-value will be returned."
	INDEX   { 
		snVLanByPortVLanIndex
	}
	::= { snVLanByPortTable 1 }


SnVLanByPortEntry ::= SEQUENCE {
	snVLanByPortVLanIndex
		INTEGER,
	snVLanByPortVLanId
		INTEGER,
	snVLanByPortPortMask
		PortMask,
	snVLanByPortQos
		INTEGER,
	snVLanByPortStpMode
		INTEGER,
	snVLanByPortStpPriority 
     	INTEGER,
	snVLanByPortStpGroupMaxAge 
		INTEGER,
	snVLanByPortStpGroupHelloTime 
		INTEGER,
	snVLanByPortStpGroupForwardDelay 
		INTEGER,
	snVLanByPortRowStatus 
		INTEGER,
	snVLanByPortOperState
		INTEGER,
	snVLanByPortBaseNumPorts
    	INTEGER,
	snVLanByPortBaseType
    	INTEGER, 
	snVLanByPortStpProtocolSpecification 
     	INTEGER,
	snVLanByPortStpMaxAge
     	Timeout,
	snVLanByPortStpHelloTime 
     	Timeout,
	snVLanByPortStpHoldTime 
     	INTEGER,
 	snVLanByPortStpForwardDelay 
       	Timeout,
	snVLanByPortStpTimeSinceTopologyChange 
     	TimeTicks,
	snVLanByPortStpTopChanges
      	Counter,
	snVLanByPortStpRootCost
    	INTEGER,
	snVLanByPortStpRootPort
    	INTEGER,
	snVLanByPortStpDesignatedRoot
     	BridgeId,
    snVLanByPortBaseBridgeAddress 
        MacAddress,
	snVLanByPortVLanName
		DisplayString,
    snVLanByPortRouterIntf
	    INTEGER,
	snVLanByPortChassisPortMask
		OCTET STRING,
	snVLanByPortPortList
		OCTET STRING
	}

snVLanByPortVLanIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The VLAN ID index must not be greater than the 
		 snVLanGroupVlanMaxEntry. Each VLAN Identifier can 
		 have a membership of multiple ports."
	::= { snVLanByPortEntry 1 }


snVLanByPortVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The VLAN ID index to the VLAN By Port Info Table.
		 Each VLAN Identifier can have a membership of multiple 
		 ports."
	::= { snVLanByPortEntry 2 }


snVLanByPortPortMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)"
	::= { snVLanByPortEntry 3 }


snVLanByPortQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Stand alone stackable switch VLAN Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron switch VLAN Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snVLanByPortEntry 4 }

snVLanByPortStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)       
		}
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Spanning Tree Mode in the Switch Group can be set
		 either enabled or disabled and the default is 
		 enabled mode.
		 enabled(1)...........activate Spanning Tree
		 disabled(0)..........no Spanning Tree"
	::= { snVLanByPortEntry 5 }

snVLanByPortStpPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-write
    STATUS  deprecated
    DESCRIPTION
	"dot1dStpPriority : The value of the write-able 
	 portion of the Stp ID, i.e., the first two octets 
	 of the (8 octet long) Bridge ID.  The other (last) 6 
	 octets of the Bridge ID are given by the value of the 
	 base bridge address - dot1dBaseBridgeAddress."
	::= { snVLanByPortEntry 6 }

snVLanByPortStpGroupMaxAge OBJECT-TYPE
	SYNTAX  INTEGER (6..40)
    ACCESS  read-write
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
     The value that all bridges use for MaxAge when 
     this bridge is acting as the root. 
     Note that 802.1D-1990 specifies that the 
     range for this parameter is related to the value of
     dot1dStpBridgeHelloTime. The granularity of this
     timer is specified by 802.1D-1990 to be 1 second.
     An agent may return a badValue error if a set is
     attempted to a value which is not a whole number
     of seconds."
	::= { snVLanByPortEntry 7 }

snVLanByPortStpGroupHelloTime OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    ACCESS  read-write
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
     The value that all bridges use for HelloTime when
     this bridge is acting as the root.  The
     granularity of this timer is specified by 802.1D-
     1990 to be 1 second.  An agent may return a
     badValue error if a set is attempted to a value
     which is not a whole number of seconds."
	::= { snVLanByPortEntry 8 }

snVLanByPortStpGroupForwardDelay OBJECT-TYPE
	SYNTAX  INTEGER (2..30)
    ACCESS  read-write
    STATUS  deprecated
    DESCRIPTION
	"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
     The value that all bridges use for ForwardDelay
     when this bridge is acting as the root.  Note that
     802.1D-1990 specifies that the range for this
     parameter is related to the value of
     dot1dStpBridgeMaxAge.  The granularity of this
     timer is specified by 802.1D-1990 to be 1 second.
     An agent may return a badValue error if a set is
     attempted to a value which is not a whole number
     of seconds."
	::= { snVLanByPortEntry 9 }

snVLanByPortRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByPortEntry 10 }

snVLanByPortOperState OBJECT-TYPE
	SYNTAX  INTEGER {
		notActivated(0),             
		activated(1)
		}
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"By default, this mode is set to notActivated(0).
		 notActivated(0)...the VLAN entry is not activated and not in running mode.
		 activated(1)......the VLAN entry is activated and in running mode"  
	::= { snVLanByPortEntry 11 }

snVLanByPortBaseNumPorts OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "The number of ports controlled by this bridging
     entity."
	::= { snVLanByPortEntry 12 }

snVLanByPortBaseType OBJECT-TYPE
    SYNTAX  INTEGER {
              unknown(1),
              transparent-only(2),
              sourceroute-only(3),
              srt(4)
            }
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "Indicates what type of bridging this bridge can
     perform.  If a bridge is actually performing a
     certain type of bridging this will be indicated by
     entries in the port table for the given type."
	::= { snVLanByPortEntry 13 }

snVLanByPortStpProtocolSpecification OBJECT-TYPE
    SYNTAX  INTEGER {
        unknown(1),
        decLb100(2),
        ieee8021d(3)
        }
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "An indication of what version of the Spanning
     Tree Protocol is being run.  The value
     'decLb100(2)' indicates the DEC LANbridge 100
     Spanning Tree protocol.  IEEE 802.1d
     implementations will return 'ieee8021d(3)'.  If
     future versions of the IEEE Spanning Tree Protocol
     are released that are incompatible with the
     current version a new value will be defined."
	::= { snVLanByPortEntry 14 }


snVLanByPortStpMaxAge OBJECT-TYPE
    SYNTAX  Timeout
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpMaxAge: From RFC1493(Bridge MIB).
     The maximum age of Spanning Tree Protocol
     information learned from the network on any port
     before it is discarded, in units of hundredths of
     a second.  This is the actual value that this
     bridge is currently using."
	::= { snVLanByPortEntry 15 }

snVLanByPortStpHelloTime OBJECT-TYPE
    SYNTAX  Timeout
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpHelloTime: From RFC1493(Bridge MIB).
     The amount of time between the transmission of
     Configuration bridge PDUs by this node on any port
     when it is the root of the spanning tree or trying
     to become so, in units of hundredths of a second.
     This is the actual value that this bridge is
     currently using."
	::= { snVLanByPortEntry 16 }

snVLanByPortStpHoldTime OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpHoldTime: From RFC1493(Bridge MIB).
     This time value determines the interval length
     during which no more than two Configuration bridge
     PDUs shall be transmitted by this node, in units
     of hundredths of a second."
	::= { snVLanByPortEntry 17 }

 snVLanByPortStpForwardDelay OBJECT-TYPE
     SYNTAX  Timeout
     ACCESS  read-only
     STATUS  deprecated
     DESCRIPTION
     "dot1dStpForwardDelay: From RFC1493(Bridge MIB).
      This time value, measured in units of hundredths
      of a second, controls how fast a port changes its
      spanning state when moving towards the Forwarding
      state.  The value determines how long the port
      stays in each of the Listening and Learning
      states, which precede the Forwarding state.  This
      value is also used, when a topology change has
      been detected and is underway, to age all dynamic
      entries in the Forwarding Database.  [Note that
      this value is the one that this bridge is
      currently using, in contrast to
      dot1dStpBridgeForwardDelay which is the value that
      this bridge and all others would start using
      if/when this bridge were to become the root.]"
	::= { snVLanByPortEntry 18 }


snVLanByPortStpTimeSinceTopologyChange OBJECT-TYPE
    SYNTAX  TimeTicks
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "The time (in hundredths of a second) since the
     last time a topology change was detected by the
     bridge entity."
	::= { snVLanByPortEntry 19 }

snVLanByPortStpTopChanges OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "The total number of topology changes detected by
     this bridge since the management entity was last
     reset or initialized."
	::= { snVLanByPortEntry 20 }

snVLanByPortStpRootCost OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpRootCost: From RFC1493(Bridge MIB).     
     The cost of the path to the root as seen from
     this bridge."
	::= { snVLanByPortEntry 21 }

snVLanByPortStpRootPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpRootPort: From RFC1493(Bridge MIB).
     The port number of the port which offers the
     lowest cost path from this bridge to the root
     bridge."
	::= { snVLanByPortEntry 22 }

snVLanByPortStpDesignatedRoot OBJECT-TYPE
    SYNTAX  BridgeId
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
     The bridge identifier of the root of the spanning
     tree as determined by the Spanning Tree Protocol
     as executed by this node.  This value is used as
     the Root Identifier parameter in all Configuration
     Bridge PDUs originated by this node."
	::= { snVLanByPortEntry 23 }

snVLanByPortBaseBridgeAddress OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  deprecated
    DESCRIPTION
    "The MAC address used by this bridge when it must
     be referred to in a unique fashion.   It is
     recommended that this be the numerically smallest
     MAC address of all ports that belong to this
     bridge.  However it is only required to be unique.
     When concatenated with dot1dStpPriority a unique
     BridgeIdentifier is formed which is used in the
     Spanning Tree Protocol."
	::= { snVLanByPortEntry 24 }

snVLanByPortVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	deprecated
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByPortEntry 25 }


snVLanByPortRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByPortEntry 26 }


snVLanByPortChassisPortMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN switch port membership.
		(It was obsoleted after release 07100, replaced by snVLanByPortPortList)"
	::= { snVLanByPortEntry 27 }

snVLanByPortPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"A list of port indices which are the port
		membership of a VLAN By Port. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByPortEntry 28 }


-- Port VLAN (Layer 2 VLAN) Port Membership Table
-- Use this table to create or delete a VLAN entry


snVLanByPortMemberTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByPortMemberEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"Port VLAN (Layer 2 VLAN) port membership table."
	::= { snVLanInfo 6 }


snVLanByPortMemberEntry OBJECT-TYPE
	SYNTAX  SnVLanByPortMemberEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the port VLAN membership table."
	INDEX   { snVLanByPortMemberVLanId, snVLanByPortMemberPortId }
	::= { snVLanByPortMemberTable 1 }

SnVLanByPortMemberEntry ::= SEQUENCE {
	snVLanByPortMemberVLanId
		INTEGER,
	snVLanByPortMemberPortId
		INTEGER,
	snVLanByPortMemberRowStatus
		INTEGER
	}

snVLanByPortMemberVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN identifier (VLAN ID)."
	::= { snVLanByPortMemberEntry 1 }

snVLanByPortMemberPortId OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The ifIndex which is a member of the port VLAN."
	::= { snVLanByPortMemberEntry 2 }

snVLanByPortMemberRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByPortMemberEntry 3 }


-- Port VLAN (Layer 2 VLAN) Configuration Table
-- Use this table to configure a VLAN entry


snVLanByPortCfgTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByPortCfgEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"Port VLAN (Layer 2 VLAN) configuration table."
	::= { snVLanInfo 7 }


snVLanByPortCfgEntry OBJECT-TYPE
	SYNTAX  SnVLanByPortCfgEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the port VLAN configuration table."
	INDEX   { snVLanByPortCfgVLanId }
	::= { snVLanByPortCfgTable 1 }


SnVLanByPortCfgEntry ::= SEQUENCE {
	snVLanByPortCfgVLanId
		INTEGER,
	snVLanByPortCfgQos
		INTEGER,
	snVLanByPortCfgStpMode
		INTEGER,
	snVLanByPortCfgStpPriority 
     	INTEGER,
	snVLanByPortCfgStpGroupMaxAge 
		INTEGER,
	snVLanByPortCfgStpGroupHelloTime 
		INTEGER,
	snVLanByPortCfgStpGroupForwardDelay 
		INTEGER,
	snVLanByPortCfgBaseNumPorts
    	INTEGER,
	snVLanByPortCfgBaseType
    	INTEGER, 
	snVLanByPortCfgStpProtocolSpecification 
     	INTEGER,
	snVLanByPortCfgStpMaxAge
     	Timeout,
	snVLanByPortCfgStpHelloTime 
     	Timeout,
	snVLanByPortCfgStpHoldTime 
     	INTEGER,
 	snVLanByPortCfgStpForwardDelay 
       	Timeout,
	snVLanByPortCfgStpTimeSinceTopologyChange 
     	TimeTicks,
	snVLanByPortCfgStpTopChanges
      	Counter,
	snVLanByPortCfgStpRootCost
    	INTEGER,
	snVLanByPortCfgStpRootPort
    	INTEGER,
	snVLanByPortCfgStpDesignatedRoot
     	BridgeId,
    snVLanByPortCfgBaseBridgeAddress 
        MacAddress,
	snVLanByPortCfgVLanName
		DisplayString,
    snVLanByPortCfgRouterIntf
	    INTEGER,
	snVLanByPortCfgRowStatus
		INTEGER
	}

snVLanByPortCfgVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN identifier (VLAN ID)."
	::= { snVLanByPortCfgEntry 1 }

snVLanByPortCfgQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Stand alone stackable switch VLAN Priority values are:
		 level0(0)   -- low prority
		 level1(1) -- high prority.
		 The BigIron switch VLAN Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snVLanByPortCfgEntry 2 }

snVLanByPortCfgStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)       
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Spanning Tree Mode in the Switch Group can be set
		 either enabled or disabled and the default is 
		 enabled mode.
		 enabled(1)...........activate Spanning Tree
		 disabled(0)..........no Spanning Tree"
	::= { snVLanByPortCfgEntry 3 }

snVLanByPortCfgStpPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
	"dot1dStpPriority : The value of the write-able 
	 portion of the Stp ID, i.e., the first two octets 
	 of the (8 octet long) Bridge ID.  The other (last) 6 
	 octets of the Bridge ID are given by the value of the 
	 base bridge address - dot1dBaseBridgeAddress."
	::= { snVLanByPortCfgEntry 4 }

snVLanByPortCfgStpGroupMaxAge OBJECT-TYPE
	SYNTAX  INTEGER (6..40)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
     The value that all bridges use for MaxAge when 
     this bridge is acting as the root. 
     Note that 802.1D-1990 specifies that the 
     range for this parameter is related to the value of
     dot1dStpBridgeHelloTime. The granularity of this
     timer is specified by 802.1D-1990 to be 1 second.
     An agent may return a badValue error if a set is
     attempted to a value which is not a whole number
     of seconds."
	::= { snVLanByPortCfgEntry 5 }

snVLanByPortCfgStpGroupHelloTime OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
     The value that all bridges use for HelloTime when
     this bridge is acting as the root.  The
     granularity of this timer is specified by 802.1D-
     1990 to be 1 second.  An agent may return a
     badValue error if a set is attempted to a value
     which is not a whole number of seconds."
	::= { snVLanByPortCfgEntry 6 }

snVLanByPortCfgStpGroupForwardDelay OBJECT-TYPE
	SYNTAX  INTEGER (2..30)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
	"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
     The value that all bridges use for ForwardDelay
     when this bridge is acting as the root.  Note that
     802.1D-1990 specifies that the range for this
     parameter is related to the value of
     dot1dStpBridgeMaxAge.  The granularity of this
     timer is specified by 802.1D-1990 to be 1 second.
     An agent may return a badValue error if a set is
     attempted to a value which is not a whole number
     of seconds."
	::= { snVLanByPortCfgEntry 7 }

snVLanByPortCfgBaseNumPorts OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The number of ports controlled by this bridging
     entity."
	::= { snVLanByPortCfgEntry 8 }

snVLanByPortCfgBaseType OBJECT-TYPE
    SYNTAX  INTEGER {
              unknown(1),
              transparent-only(2),
              sourceroute-only(3),
              srt(4)
            }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "Indicates what type of bridging this bridge can
     perform.  If a bridge is actually performing a
     certain type of bridging this will be indicated by
     entries in the port table for the given type."
	::= { snVLanByPortCfgEntry 9 }

snVLanByPortCfgStpProtocolSpecification OBJECT-TYPE
    SYNTAX  INTEGER {
        unknown(1),
        decLb100(2),
        ieee8021d(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "An indication of what version of the Spanning
     Tree Protocol is being run.  The value
     'decLb100(2)' indicates the DEC LANbridge 100
     Spanning Tree protocol.  IEEE 802.1d
     implementations will return 'ieee8021d(3)'.  If
     future versions of the IEEE Spanning Tree Protocol
     are released that are incompatible with the
     current version a new value will be defined."
	::= { snVLanByPortCfgEntry 10 }


snVLanByPortCfgStpMaxAge OBJECT-TYPE
    SYNTAX  Timeout
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpMaxAge: From RFC1493(Bridge MIB).
     The maximum age of Spanning Tree Protocol
     information learned from the network on any port
     before it is discarded, in units of hundredths of
     a second.  This is the actual value that this
     bridge is currently using."
	::= { snVLanByPortCfgEntry 11 }

snVLanByPortCfgStpHelloTime OBJECT-TYPE
    SYNTAX  Timeout
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpHelloTime: From RFC1493(Bridge MIB).
     The amount of time between the transmission of
     Configuration bridge PDUs by this node on any port
     when it is the root of the spanning tree or trying
     to become so, in units of hundredths of a second.
     This is the actual value that this bridge is
     currently using."
	::= { snVLanByPortCfgEntry 12 }

snVLanByPortCfgStpHoldTime OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpHoldTime: From RFC1493(Bridge MIB).
     This time value determines the interval length
     during which no more than two Configuration bridge
     PDUs shall be transmitted by this node, in units
     of hundredths of a second."
	::= { snVLanByPortCfgEntry 13 }

 snVLanByPortCfgStpForwardDelay OBJECT-TYPE
     SYNTAX  Timeout
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
     "dot1dStpForwardDelay: From RFC1493(Bridge MIB).
      This time value, measured in units of hundredths
      of a second, controls how fast a port changes its
      spanning state when moving towards the Forwarding
      state.  The value determines how long the port
      stays in each of the Listening and Learning
      states, which precede the Forwarding state.  This
      value is also used, when a topology change has
      been detected and is underway, to age all dynamic
      entries in the Forwarding Database.  [Note that
      this value is the one that this bridge is
      currently using, in contrast to
      dot1dStpBridgeForwardDelay which is the value that
      this bridge and all others would start using
      if/when this bridge were to become the root.]"
	::= { snVLanByPortCfgEntry 14 }


snVLanByPortCfgStpTimeSinceTopologyChange OBJECT-TYPE
    SYNTAX  TimeTicks
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The time (in hundredths of a second) since the
     last time a topology change was detected by the
     bridge entity."
	::= { snVLanByPortCfgEntry 15 }

snVLanByPortCfgStpTopChanges OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The total number of topology changes detected by
     this bridge since the management entity was last
     reset or initialized."
	::= { snVLanByPortCfgEntry 16 }

snVLanByPortCfgStpRootCost OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpRootCost: From RFC1493(Bridge MIB).     
     The cost of the path to the root as seen from
     this bridge."
	::= { snVLanByPortCfgEntry 17 }

snVLanByPortCfgStpRootPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpRootPort: From RFC1493(Bridge MIB).
     The port number of the port which offers the
     lowest cost path from this bridge to the root
     bridge."
	::= { snVLanByPortCfgEntry 18 }

snVLanByPortCfgStpDesignatedRoot OBJECT-TYPE
    SYNTAX  BridgeId
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
     The bridge identifier of the root of the spanning
     tree as determined by the Spanning Tree Protocol
     as executed by this node.  This value is used as
     the Root Identifier parameter in all Configuration
     Bridge PDUs originated by this node."
	::= { snVLanByPortCfgEntry 19 }

snVLanByPortCfgBaseBridgeAddress OBJECT-TYPE
    SYNTAX  MacAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The MAC address used by this bridge when it must
     be referred to in a unique fashion.   It is
     recommended that this be the numerically smallest
     MAC address of all ports that belong to this
     bridge.  However it is only required to be unique.
     When concatenated with dot1dStpPriority a unique
     BridgeIdentifier is formed which is used in the
     Spanning Tree Protocol."
	::= { snVLanByPortCfgEntry 20 }

snVLanByPortCfgVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByPortCfgEntry 21 }


snVLanByPortCfgRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByPortCfgEntry 22 }

snVLanByPortCfgRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Use object to delete a vlan entry."
	::= { snVLanByPortCfgEntry 23 }


-- VLAN by Protocol Configuration Table 


snVLanByProtocolTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByProtocolEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"."
	::= { snVLanInfo 2 }


snVLanByProtocolEntry OBJECT-TYPE
	SYNTAX  SnVLanByProtocolEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the VLAN By Protocol Configuration table. "
	INDEX   { 
		snVLanByProtocolVLanId,
	 	snVLanByProtocolIndex
	}
	::= { snVLanByProtocolTable 1 }


SnVLanByProtocolEntry ::= SEQUENCE {
    snVLanByProtocolVLanId
		INTEGER,
	snVLanByProtocolIndex
		INTEGER,
	snVLanByProtocolDynamic
  		INTEGER,
	snVLanByProtocolStaticMask
		PortMask,
	snVLanByProtocolExcludeMask
		PortMask,
	snVLanByProtocolRouterIntf
		INTEGER,	
	snVLanByProtocolRowStatus
		INTEGER,	
	snVLanByProtocolDynamicMask
		PortMask,
	snVLanByProtocolChassisStaticMask
		OCTET STRING,
	snVLanByProtocolChassisExcludeMask
		OCTET STRING,
	snVLanByProtocolChassisDynamicMask
		OCTET STRING,
	snVLanByProtocolVLanName
		DisplayString,
	snVLanByProtocolStaticPortList
		OCTET STRING,
	snVLanByProtocolExcludePortList
		OCTET STRING,
	snVLanByProtocolDynamicPortList
		OCTET STRING
	}

snVLanByProtocolVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID index to both of the VLAN By Port Info Table
		 and this table."
	::= { snVLanByProtocolEntry 1 }


snVLanByProtocolIndex OBJECT-TYPE
	SYNTAX  INTEGER {
		ip(1),
	    ipx(2),
	    appleTalk(3),
	    decNet(4),
	    netBios(5),
		others(6),
		ipv6(7)
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		" The following IP/IPX protocol VLAN types are operated 
		in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7)
		The following are operated in Layer2 bridging such as:
	    appleTalk(3), decNet(4), netBios(5),
	    others(6) -- other protocols which are defined here. "
	::= { snVLanByProtocolEntry 2 }

snVLanByProtocolDynamic OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
	    enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		" disabled(0) : disabled dynamic port inclusion - applied to switch only.
		  enabled(1) : enabled dynamic port inclusion - applied to switch only. "
	::= { snVLanByProtocolEntry 3 }

snVLanByProtocolStaticMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch Protocol VLAN port membership applied in static mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByProtocolEntry 4 }

snVLanByProtocolExcludeMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByProtocolEntry 5 }

snVLanByProtocolRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByProtocolEntry 6 }

snVLanByProtocolRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByProtocolEntry 7 }

snVLanByProtocolDynamicMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch Protocol VLAN active port membership.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByProtocolEntry 8 }

snVLanByProtocolChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis Protocol VLAN port membership applied in static mode.
		(It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)"
	::= { snVLanByProtocolEntry 9 }

snVLanByProtocolChassisExcludeMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis Protocol VLAN port membership applied in exclusive mode.
		(It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)"
	::= { snVLanByProtocolEntry 10 }

snVLanByProtocolChassisDynamicMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Chassis Protocol VLAN active port membership.
		(It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)"
	::= { snVLanByProtocolEntry 11 }

snVLanByProtocolVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByProtocolEntry 12 }

snVLanByProtocolStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the Protocol VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByProtocolEntry 13 }

snVLanByProtocolExcludePortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the excluded from port
		membership of the Protocol VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByProtocolEntry 14 }

snVLanByProtocolDynamicPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are dynamically joining the port
		membership of the Protocol VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByProtocolEntry 15 }


-- VLAN By IP Subnet Configuration Table


snVLanByIpSubnetTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByIpSubnetEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the VLAN By IPX Network Number Table."
	::= { snVLanInfo 3 }


snVLanByIpSubnetEntry OBJECT-TYPE
	SYNTAX  SnVLanByIpSubnetEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the VLAN By IP Subnet Configuration table. "
	INDEX   { 
		snVLanByIpSubnetVLanId,
		snVLanByIpSubnetIpAddress,
		snVLanByIpSubnetSubnetMask
	}
	::= { snVLanByIpSubnetTable 1 }


SnVLanByIpSubnetEntry ::= SEQUENCE {
	snVLanByIpSubnetVLanId
		INTEGER,
	snVLanByIpSubnetIpAddress
		IpAddress,
	snVLanByIpSubnetSubnetMask
		IpAddress,
	snVLanByIpSubnetDynamic
  		INTEGER,
	snVLanByIpSubnetStaticMask
		PortMask,
	snVLanByIpSubnetExcludeMask
		PortMask,
	snVLanByIpSubnetRouterIntf
		INTEGER,
	snVLanByIpSubnetRowStatus
		INTEGER,
	snVLanByIpSubnetDynamicMask
		PortMask,
	snVLanByIpSubnetChassisStaticMask
		OCTET STRING,
	snVLanByIpSubnetChassisExcludeMask
		OCTET STRING,
	snVLanByIpSubnetChassisDynamicMask
		OCTET STRING,
	snVLanByIpSubnetVLanName
		DisplayString,
	snVLanByIpSubnetStaticPortList
		OCTET STRING,
	snVLanByIpSubnetExcludePortList
		OCTET STRING,
	snVLanByIpSubnetDynamicPortList
		OCTET STRING
	}

snVLanByIpSubnetVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID index to both of the VLAN By Port Info Table
		 and this table."
	::= { snVLanByIpSubnetEntry 1 }


snVLanByIpSubnetIpAddress OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Subnet IP address."
	::= { snVLanByIpSubnetEntry 2 }

snVLanByIpSubnetSubnetMask OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Subnet mask associated with the Subnet IP address."
	::= { snVLanByIpSubnetEntry 3 }

snVLanByIpSubnetDynamic OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
	    enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		" disabled(0) : disabled dynamic port inclusion - applied to switch only.
		  enabled(1) : enabled dynamic port inclusion - applied to switch only. "
	::= { snVLanByIpSubnetEntry 4 }

snVLanByIpSubnetStaticMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN By Subnet port membership applied in static mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpSubnetEntry 5 }

snVLanByIpSubnetExcludeMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpSubnetEntry 6 }

snVLanByIpSubnetRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByIpSubnetEntry 7 }


snVLanByIpSubnetRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByIpSubnetEntry 8 }

snVLanByIpSubnetDynamicMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN By Subnet active port membership.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpSubnetEntry 9 }

snVLanByIpSubnetChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By Subnet port membership applied in static mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)"
	::= { snVLanByIpSubnetEntry 10 }

snVLanByIpSubnetChassisExcludeMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By Subnet port membership applied in exclusive mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)"
	::= { snVLanByIpSubnetEntry 11 }

snVLanByIpSubnetChassisDynamicMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By Subnet active port membership.
		(It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)"
	::= { snVLanByIpSubnetEntry 12 }

snVLanByIpSubnetVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByIpSubnetEntry 13 }

snVLanByIpSubnetStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the VLAN By IP Subnet. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpSubnetEntry 14 }

snVLanByIpSubnetExcludePortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the excluded from port
		membership of the VLAN By IP Subnet. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpSubnetEntry 15 }

snVLanByIpSubnetDynamicPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are dynamically joining the port
		membership of the VLAN By IP Subnet. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpSubnetEntry 16 }


-- VLAN By IPX Net Configuration Table


snVLanByIpxNetTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByIpxNetEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the VLAN By IPX Network Number Table."
	::= { snVLanInfo 4 }


snVLanByIpxNetEntry OBJECT-TYPE
	SYNTAX  SnVLanByIpxNetEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the VLAN By Ipx Network Number Configuration table. "
	INDEX   { 
		snVLanByIpxNetVLanId,
		snVLanByIpxNetNetworkNum,
		snVLanByIpxNetFrameType
	}
	::= { snVLanByIpxNetTable 1 }


SnVLanByIpxNetEntry ::= SEQUENCE {
	snVLanByIpxNetVLanId
		INTEGER,
	snVLanByIpxNetNetworkNum
		OCTET STRING,
	snVLanByIpxNetFrameType
  		INTEGER,
	snVLanByIpxNetDynamic
  		INTEGER,
	snVLanByIpxNetStaticMask
		PortMask,
	snVLanByIpxNetExcludeMask
		PortMask,
	snVLanByIpxNetRouterIntf
		INTEGER,
	snVLanByIpxNetRowStatus
		INTEGER,
	snVLanByIpxNetDynamicMask
		PortMask,
	snVLanByIpxNetChassisStaticMask
		OCTET STRING,
	snVLanByIpxNetChassisExcludeMask
		OCTET STRING,
	snVLanByIpxNetChassisDynamicMask
		OCTET STRING,
	snVLanByIpxNetVLanName
		DisplayString,
	snVLanByIpxNetStaticPortList
		OCTET STRING,
	snVLanByIpxNetExcludePortList
		OCTET STRING,
	snVLanByIpxNetDynamicPortList
		OCTET STRING
	}

snVLanByIpxNetVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID index to both of the VLAN By Port Info Table
		 and this table."
	::= { snVLanByIpxNetEntry 1 }


snVLanByIpxNetNetworkNum OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(4))
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"IPX Network Number."
	::= { snVLanByIpxNetEntry 2 }

snVLanByIpxNetFrameType OBJECT-TYPE
	SYNTAX  INTEGER {
	    notApplicable(0),
		ipxEthernet8022(1),
	    ipxEthernet8023(2),
	    ipxEthernetII(3),
	    ipxEthernetSnap(4)
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		" The following IPX Frame types are operated 
		in Layer3 VLAN such as :  
		ipxEthernet8022(1), ipxEthernet8023(2),
	    ipxEthernetII(3), ipxEthernetSnap(4).
	    choose notApplicable(0) for other protocols.
	    Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
	    a SNMP-SET error will be returned."
	::= { snVLanByIpxNetEntry 3 }

snVLanByIpxNetDynamic OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
	    enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		" disabled(0) : disabled dynamic port inclusion - applied to switch only.
		  enabled(1) : enabled dynamic port inclusion - applied to switch only. "
	::= { snVLanByIpxNetEntry 4 }

snVLanByIpxNetStaticMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The VLAN By IPX network port membership applied in static mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpxNetEntry 5 }

snVLanByIpxNetExcludeMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The VLAN By IPX network port membership applied in exclusive mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpxNetEntry 6 }


snVLanByIpxNetRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByIpxNetEntry 7 }


snVLanByIpxNetRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByIpxNetEntry 8 }

snVLanByIpxNetDynamicMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The VLAN By IPX network active port membership.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpxNetEntry 9 }

snVLanByIpxNetChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By IPX network port membership applied in static mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)"
	::= { snVLanByIpxNetEntry 10 }

snVLanByIpxNetChassisExcludeMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By IPX network port membership applied in exclusive mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)"
	::= { snVLanByIpxNetEntry 11 }

snVLanByIpxNetChassisDynamicMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By IPX network active port membership.
		(It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)"
	::= { snVLanByIpxNetEntry 12 }

snVLanByIpxNetVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByIpxNetEntry 13 }

snVLanByIpxNetStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the VLAN By IPX network. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpxNetEntry 14 }

snVLanByIpxNetExcludePortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the excluded from port
		membership of the VLAN By IPX network. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpxNetEntry 15 }

snVLanByIpxNetDynamicPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are dynamically joining the port
		membership of the VLAN By IPX network. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpxNetEntry 16 }


-- VLAN By AppleTalk Cable Configuration Table


snVLanByATCableTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByATCableEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A Table Of VLAN By AppleTalk Network Number."
	::= { snVLanInfo 5 }

snVLanByATCableEntry OBJECT-TYPE
	SYNTAX  SnVLanByATCableEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the AppleTalk Cable VLAN table."
	INDEX   {snVLanByATCableVLanId, snVLanByATCableIndex}
	::= { snVLanByATCableTable 1 }

SnVLanByATCableEntry ::= SEQUENCE {
	snVLanByATCableVLanId
		INTEGER,
	snVLanByATCableIndex
		INTEGER,
	snVLanByATCableRouterIntf
		INTEGER,
	snVLanByATCableRowStatus
		INTEGER,
	snVLanByATCableChassisStaticMask
		OCTET STRING,
	snVLanByATCableVLanName
		DisplayString,
	snVLanByATCableStaticPortList
		OCTET STRING
	}

snVLanByATCableVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID of a PORT VLAN of which the AppleTalk Cable
		VLAN was attaching to."
	::= { snVLanByATCableEntry 1 }

snVLanByATCableIndex OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk Cable VLAN index number."
	::= { snVLanByATCableEntry 2 }

snVLanByATCableRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (0..60)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A virtual router interface to the AppleTalk Cable VLAN,
		only router products accept the SNMP-SET operation. The
		value zero indicates that virtual router interface was
		not configured."
	::= { snVLanByATCableEntry 3 }

snVLanByATCableRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByATCableEntry 4 }

snVLanByATCableChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"A list of ports which are statically configured to
		become port members of a VLAN.
		(It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)"
	::= { snVLanByATCableEntry 5 }

snVLanByATCableVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"VLAN Name string."
	::= { snVLanByATCableEntry 6 }

snVLanByATCableStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the AppleTalk Cable VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByATCableEntry 7 }




-- Switch Port Information Group



snSwPortInfoTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnSwPortInfoEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A specific snSwPortInfo group consists of a number of 
		 switch ports.  "
	::= { snSwPortInfo 1 }

snSwPortInfoEntry OBJECT-TYPE
	SYNTAX  SnSwPortInfoEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the snSwPortInfo table indicates the 
		 configuration on a specified port. A SNMP SET PDU 
		 for a row of the snSwPortInfoTable requires the entired 
		 sequence of the MIB Objects in each 
		 snSwPortInfoEntry stored in one PDU.  Otherwise, 
	 	 GENERR return-value will be returned."
	INDEX   { 
		snSwPortInfoPortNum
	}
	::= { snSwPortInfoTable 1 }

SnSwPortInfoEntry ::= SEQUENCE {
	snSwPortInfoPortNum
		INTEGER,
	snSwPortInfoMonitorMode
	    INTEGER,
	snSwPortInfoTagMode
		INTEGER,
	snSwPortInfoChnMode
	    INTEGER,
	snSwPortInfoSpeed
	    INTEGER,
    snSwPortInfoMediaType
	    INTEGER,
	snSwPortInfoConnectorType
	    INTEGER,
	snSwPortInfoAdminStatus
		INTEGER,
	snSwPortInfoLinkStatus
		INTEGER,
	snSwPortInfoPortQos
	    INTEGER,
	snSwPortInfoPhysAddress
	    PhysAddress,
    snSwPortStatsInFrames 
    	Counter,
	snSwPortStatsOutFrames 
    	Counter,
	snSwPortStatsAlignErrors            
		Counter,
    snSwPortStatsFCSErrors                  
		Counter,
    snSwPortStatsMultiColliFrames    
		Counter,
    snSwPortStatsFrameTooLongs              
		Counter,
	snSwPortStatsTxColliFrames
	    Counter,
	snSwPortStatsRxColliFrames
	    Counter,
	snSwPortStatsFrameTooShorts
	    Counter,
	snSwPortLockAddressCount
	    INTEGER,
	snSwPortStpPortEnable
	    INTEGER,
    snSwPortDhcpGateListId
	    INTEGER,
	snSwPortName
		DisplayString,
	snSwPortStatsInBcastFrames
	    Counter,
	snSwPortStatsOutBcastFrames
	    Counter,
	snSwPortStatsInMcastFrames
	    Counter,
	snSwPortStatsOutMcastFrames
	    Counter,
	snSwPortStatsInDiscard
	    Counter,
	snSwPortStatsOutDiscard
	    Counter,
	snSwPortStatsMacStations
	    INTEGER,
	snSwPortCacheGroupId
	    INTEGER,
	snSwPortTransGroupId
	    INTEGER,
	snSwPortInfoAutoNegotiate
	    INTEGER,
	snSwPortInfoFlowControl
	    INTEGER,
	snSwPortInfoGigType
	    INTEGER,
	snSwPortStatsLinkChange
	    Counter,
	snSwPortIfIndex
	    INTEGER,
	snSwPortDescr
	    DisplayString,
	snSwPortInOctets
	    OCTET STRING,
	snSwPortOutOctets
	    OCTET STRING,
	snSwPortStatsInBitsPerSec
	    Gauge,
	snSwPortStatsOutBitsPerSec
	    Gauge,
	snSwPortStatsInPktsPerSec
	    Gauge,
	snSwPortStatsOutPktsPerSec
	    Gauge,
	snSwPortStatsInUtilization
	    INTEGER (0..10000),
	snSwPortStatsOutUtilization
	    INTEGER (0..10000),
	snSwPortFastSpanPortEnable
	    INTEGER,
	snSwPortFastSpanUplinkEnable
	    INTEGER,
	snSwPortVlanId
	    INTEGER,
	snSwPortRouteOnly
	    INTEGER,
	snSwPortPresent
	    INTEGER,
	snSwPortGBICStatus
	    INTEGER,
	snSwPortStatsInKiloBitsPerSec
		Unsigned32,
	snSwPortStatsOutKiloBitsPerSec    
		Unsigned32,
	snSwPortLoadInterval
	    INTEGER (30..300),
	snSwPortTagType
	    INTEGER
	}

snSwPortInfoPortNum OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index.
		 The bit 0 to bit 7: port number. 
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snSwPortInfoEntry 1 }


snSwPortInfoMonitorMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		input(1),
		output(2),
		both(3)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A monitoring port is selected and its traffic will be
		 analyzed if the mode is not disabled(0), which is
		 the default mode.
		 The values are:

		 disabled(0) -- No traffic monitoring
		 input(1)  -- traffic monitoring is activated on packets received
		 output(2)  -- traffic monitoring is activated on packets transmitted
		 both(3)  -- traffic monitoring is activated on packets
		             received and transmitted."
	::= { snSwPortInfoEntry 2 }


snSwPortInfoTagMode OBJECT-TYPE
	SYNTAX  INTEGER {
		tagged(1),      
		untagged(2),    
		auto(3),
		disabled(4)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"For tagged port, we could have multiple VLANs 
		 per port. For untagged port or auto port, there 
		 is only one VLAN ID per port."  
	::= { snSwPortInfoEntry 3 }


snSwPortInfoChnMode OBJECT-TYPE
	SYNTAX  INTEGER {
        none(0),
		halfDuplex(1),  
		fullDuplex(2)   
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The port can be configured to operate in either
		half or full duplex mode. The values are:
			halfDuplex(1)...half duplex mode
			fullDuplex(2)...full duplex mode
		The read-back channel status from hardware are:
            none(0).........link down or port disabled.
			halfDuplex(1)...half duplex mode
			fullDuplex(2)...full duplex mode
		
		The port media type (expansion or regular)
		and port link type (trunk or feeder) determine
		value of this object.
		The port can not set to half duplex mode
		if the port connect mode is m200e(4).
		However, the value of this parameter may be
		automatically set whenever the expansion port
		is connected (e.g. cascade connecting device)."
	::= { snSwPortInfoEntry 4 }


snSwPortInfoSpeed OBJECT-TYPE
	SYNTAX  INTEGER {
        none(0),
	    sAutoSense(1),
		s10M(2),
		s100M(3),
		s1G(4),
		s45M(5),
		s155M(6),
		s10G(7)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION     
		"The speed configuration for a port. The values are:
          none(0)..........link down or no traffic.
		  sAutoSense(1)....Auto-sensing 10 or 100Mbits.
		  s10M(2)..........10Mbits per second.
		  s100M(3).........100Mbits per second.
		  s1G(4)...........1Gbits per second.
		  s45M(5)..........45Mbits per second (T3) (for expansion board only).
		  s155M(6).........155Mbits per second (ATM) (for expansion board only).
		  s10G(7)..........10Gbits per second.

         The read-back hardware status are the following:
          none(0)..........link down or no traffic.
		  s10M(2)..........10Mbits per second.
		  s100M(3).........100Mbits per second.
		  s1G(4)...........1Gbits per second.
		  s45M(5)..........45Mbits per second (T3) (for expansion board only).
		  s155M(6).........155Mbits per second (ATM) (for expansion board only).
		  s10G(7)..........10Gbits per second.

		The port media type (expansion or regular)
		and port link type (trunk or feeder) determine
		whether this object can be written and the valid
		values.
		It is not allowed to change speed for trunks ports.
		For expansion ports, all of the above speed 
		can be set.
		However, the value of this parameter may be
		automatically set whenever the expansion port
		is connected (e.g. cascade connecting device)."
	::= { snSwPortInfoEntry 5 }



snSwPortInfoMediaType OBJECT-TYPE
	SYNTAX  INTEGER {
	        other(1),
		m100BaseTX(2),
		m100BaseFX(3),
		m1000BaseFX(4),
		mT3(5),
		m155ATM(6),
		m1000BaseTX(7),
		m622ATM(8),
		m155POS(9),
		m622POS(10),
		m2488POS(11),
		m10000BaseFX(12)
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION 
		"The media type for the port. The
		values are:
		  other(1).........other or unknown media.
		  m100BaseTX(2)....100Mbits per second copper.
		  m100BaseFX(3)....100Mbits per second fiber.
		  m1000BaseFX(4)...1Gbits per second fiber.
		  mT3(5)...........45Mbits per second (T3).
		  m155ATM(6).......155Mbits per second (ATM).
		  m1000BaseTX(7)...1Gbits per second copper.
		  m622ATM(8).......622Mbits per second (ATM).
		  m155POS(9).......155Mbits per second (POS).
		  m622POS(10)......622Mbits per second (POS).
		  m2488POS(11).....2488Mbits per second (POS).
		  m10000BaseFX(12).10Gbits per second fiber."
	::= { snSwPortInfoEntry 6 }



snSwPortInfoConnectorType OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		copper(2),
		fiber(3)
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION 
		"The type of connector that the port offers.
		 The values are:
		  other(1)...........other or unknown connector
		  copper(2)..........Copper connector
		  fiber(3)...........Fiber connector
		 This describes the physical connector type"
	::= { snSwPortInfoEntry 7 }


snSwPortInfoAdminStatus OBJECT-TYPE
    SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
		}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
		"The desired state of all ports.  The
	 	testing(3) state indicates that no operational
	 	packets can be passed. 
	 	(same as ifAdminStatus in MIB-II)"
    ::= { snSwPortInfoEntry 8 }


snSwPortInfoLinkStatus OBJECT-TYPE
    SYNTAX  INTEGER {
    	up(1),       -- ready to pass packets
    	down(2),
    	testing(3)   -- in some test mode
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational state of the interface.
         The testing(3) state indicates that no operational
         packets can be passed. 
         (same as ifOperStatus in MIB-II)"
    ::= { snSwPortInfoEntry 9 }


snSwPortInfoPortQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Stand alone stackable switch Port Qos Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron Port Qos Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snSwPortInfoEntry 10 }


snSwPortInfoPhysAddress OBJECT-TYPE
	SYNTAX  PhysAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port physical address. The physical address 
		represents the switch port."
	::= { snSwPortInfoEntry 11 }



snSwPortStatsInFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of packets received on the interface."
    ::= { snSwPortInfoEntry 12 }


snSwPortStatsOutFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of packets transmitted out of the interface."
    ::= { snSwPortInfoEntry 13 }


snSwPortStatsAlignErrors   OBJECT-TYPE
     SYNTAX     Counter
     ACCESS     read-only
     STATUS     mandatory
     DESCRIPTION
	 	"dot3StatsAlignmentErrors : A count of frames 
	  	received on a particular interface that are 
	  	not an integral number of octets in length 
	  	and do not pass the FCS check.

	  	The count represented by an instance of this
	  	object is incremented when the alignmentError
	  	status is returned by the MAC service to the
	  	LLC (or other MAC user). Received frames for
	  	which multiple error conditions obtain are,
	  	according to the conventions of IEEE 802.3
	  	Layer Management, counted exclusively according
	  	to the error status presented to the LLC."
    ::= { snSwPortInfoEntry 14 }

snSwPortStatsFCSErrors   OBJECT-TYPE
     SYNTAX      Counter
     ACCESS      read-only
     STATUS      mandatory
     DESCRIPTION
	 	"dot3StatsFCSErrors : A count of frames received 
	  	on a particular interface that are an integral 
	  	number of octets in length but do not pass the 
	  	FCS check.

	  	The count represented by an instance of this
	  	object is incremented when the frameCheckError
	  	status is returned by the MAC service to the
	  	LLC (or other MAC user). Received frames for
	  	which multiple error conditions obtain are,
	  	according to the conventions of IEEE 802.3
	  	Layer Management, counted exclusively according
	  	to the error status presented to the LLC."
    ::= { snSwPortInfoEntry 15 }


snSwPortStatsMultiColliFrames   OBJECT-TYPE
     SYNTAX      Counter
     ACCESS      read-only
     STATUS      mandatory
     DESCRIPTION
	 	"dot3StatsMultipleCollisionFrames : 
	  	A count of successfully transmitted frames on
	  	a particular interface for which transmission
	  	is inhibited by more than one collision.

	  	A frame that is counted by an instance of this
	  	object is also counted by the corresponding
	  	instance of either the ifOutUcastPkts,
	  	ifOutMulticastPkts, or ifOutBroadcastPkts,
	  	and is not counted by the corresponding
	  	instance of the dot3StatsSingleCollisionFrames
	  	object."
    ::= { snSwPortInfoEntry 16 }


snSwPortStatsFrameTooLongs   OBJECT-TYPE
     SYNTAX    Counter
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
	 	"dot3StatsFrameTooLongs : A count of frames 
	  	received on a particular interface that 
	  	exceed the maximum permitted frame size.

	  	The count represented by an instance of this
	  	object is incremented when the frameTooLong
	  	status is returned by the MAC service to the
	  	LLC (or other MAC user). Received frames for
	  	which multiple error conditions obtain are,
	  	according to the conventions of IEEE 802.3
	  	Layer Management, counted exclusively according
	  	to the error status presented to the LLC."
    ::= { snSwPortInfoEntry 17 }


snSwPortStatsTxColliFrames   OBJECT-TYPE
     SYNTAX      Counter
     ACCESS      read-only
     STATUS      mandatory
     DESCRIPTION
	 	"A count of successfully transmitted frames on
	  	a particular interface for which transmission
	  	is inhibited by more than one collision.

	  	A frame that is counted by a combination of
		both dot3StatsSingleCollisionFrames and
		dot3StatsMultipleCollisionFrames objects."
    ::= { snSwPortInfoEntry 18 }

snSwPortStatsRxColliFrames   OBJECT-TYPE
     SYNTAX      Counter
     ACCESS      read-only
     STATUS      mandatory
     DESCRIPTION
	 	"A count of successfully received frames on
	  	a particular interface for which transmission
	  	is inhibited by more than one collision.  This
	  	object is not specified in dot3 but it has the
	  	same functionarity as snSwPortStatsTxColliFrames."
    ::= { snSwPortInfoEntry 19 }

snSwPortStatsFrameTooShorts   OBJECT-TYPE
     SYNTAX    Counter
     ACCESS    read-only
     STATUS    mandatory
     DESCRIPTION
	 	" A count of frames received on a particular 
	 	interface that below the minimum permitted 
	 	frame size."
    ::= { snSwPortInfoEntry 20 }

snSwPortLockAddressCount OBJECT-TYPE
     SYNTAX  INTEGER (0..2048)
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
	 	"The number of source MAC addresses are allowed
	 	for a port. Writing 0 to this object will allow
	 	any number of addresses."
    DEFVAL { 8 }
    ::= { snSwPortInfoEntry 21 }

snSwPortStpPortEnable OBJECT-TYPE
     SYNTAX  INTEGER {
               disabled(0),
               enabled(1)
             }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
        "The enabled/disabled status of the port."
     REFERENCE
     	"IEEE 802.1D-1990: Section 4.5.5.2, dot1dStpPortEnable"
     ::= { snSwPortInfoEntry 22 }

snSwPortDhcpGateListId OBJECT-TYPE
	SYNTAX  INTEGER (0..32)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The ID for a DHCP gateway list entry relative 
		 to this switch port. 0 = unset or no assigned ID"
	::= { snSwPortInfoEntry 23 }

snSwPortName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..255))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Port Name string."
	::= { snSwPortInfoEntry 24 }

snSwPortStatsInBcastFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of broadcast packets received on the interface."
    ::= { snSwPortInfoEntry 25 }


snSwPortStatsOutBcastFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of broadcast packets transmitted out of the interface."
    ::= { snSwPortInfoEntry 26 }

snSwPortStatsInMcastFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of multicast packets received on the interface."
    ::= { snSwPortInfoEntry 27 }


snSwPortStatsOutMcastFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of multicast packets transmitted out of the interface."
    ::= { snSwPortInfoEntry 28 }


snSwPortStatsInDiscard OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of inbound packets which were chosen
         to be discarded even though no errors had been
         detected to prevent their being deliverable to a
         higher-layer protocol.  One possible reason for
         discarding such a packet could be to free up
         buffer space."
    ::= { snSwPortInfoEntry 29 }


snSwPortStatsOutDiscard OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of outbound packets which were chosen
         to be discarded even though no errors had been
         detected to prevent their being transmitted.  One
         possible reason for discarding such a packet could
         be to free up buffer space."
    ::= { snSwPortInfoEntry 30 }

snSwPortStatsMacStations OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of MAC Stations connected to the interface."
    ::= { snSwPortInfoEntry 31 }


snSwPortCacheGroupId OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
    	"Cache Group ID for the interface."
    ::= { snSwPortInfoEntry 32 }

snSwPortTransGroupId OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
    	"Transparent Group ID for the interface."
    ::= { snSwPortInfoEntry 33 }

snSwPortInfoAutoNegotiate OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1),
		negFullAuto(2),
		global(3),
		other(4)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This feature only applies to Gigabit Ethernet ports. If set to
		disable(0), port will be put to non-negotiation mode. If set to
		enable(1), port will start auto-negotiation indefinitely until
		succeed. If set to negFullAuto(2), the port will start with auto-
		negotiation, if the negotiation failed, then it will automatically
		switch to non-negotiation mode. Stackable products (except TurboIron
		8) Gigabit Ethernet ports do not support negFullAuto(2). If set
		to global(3), port negotiation mode follows the value of
		snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns
		the value other(4)."
    DEFVAL { global }
	::= { snSwPortInfoEntry 34 }


snSwPortInfoFlowControl OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/Disbale port flow control."
    DEFVAL { enabled }
	::= { snSwPortInfoEntry 35 }

snSwPortInfoGigType OBJECT-TYPE
	SYNTAX  INTEGER {
		m1000BaseSX(0),
		m1000BaseLX(1),
		m1000BaseLH(2),
		m1000BaseLHA(3),
		m1000BaseLHB(4),
		m1000BaseTX(5),
		m10000BaseSR(6),
		m10000BaseLR(7),
		m10000BaseER(8),
		notApplicable(255)
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION 
		"The media type for the port. The
		values are:
		  m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
		  m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
		  m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
		  m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
		  m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
		  m1000BaseTX(5)....1Gbits per second copper (100meter).
		  m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
		  m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
		  m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
		  notApplicable(255)....a non-gigabit port."
	::= { snSwPortInfoEntry 36 }


snSwPortStatsLinkChange OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of link state change of the interface."
    ::= { snSwPortInfoEntry 37 }


snSwPortIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"In order to identify a particular interface, this
		object shall identify the instance of the ifIndex
		object, defined in RFC 1213 and RFC 1573."
    ::= { snSwPortInfoEntry 38 }


snSwPortDescr OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"A textual string containing the slot/port information
    	about the interface."
    ::= { snSwPortInfoEntry 39 }


snSwPortInOctets OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(8))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of octets received on the interface,
    	including framing characters. This object is a 64-bit
		counter of the ifInOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
    ::= { snSwPortInfoEntry 40 }


snSwPortOutOctets OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(8))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The total number of octets transmitted out of the interface,
    	including framing characters. This object is a 64-bit
		counter of the ifOutOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
    ::= { snSwPortInfoEntry 41 }


snSwPortStatsInBitsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of bits per second received on the interface
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 42 }


snSwPortStatsOutBitsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of bits per second transmitted out of the interface
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 43 }


snSwPortStatsInPktsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of packets per second received on the interface
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 44 }


snSwPortStatsOutPktsPerSec OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The number of packets per second transmitted out of the interface
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 45 }


snSwPortStatsInUtilization OBJECT-TYPE
    SYNTAX  INTEGER (0..10000)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The input network utilization in hundredths of a percent
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 46 }


snSwPortStatsOutUtilization OBJECT-TYPE
    SYNTAX  INTEGER (0..10000)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"The output network utilization in hundredths of a percent
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 47 }

snSwPortFastSpanPortEnable OBJECT-TYPE
     SYNTAX  INTEGER {
               disabled(0),
               enabled(1)
             }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
        "The enabled/disabled fast span port status of the port."
     ::= { snSwPortInfoEntry 48 }

snSwPortFastSpanUplinkEnable OBJECT-TYPE
     SYNTAX  INTEGER {
               disabled(0),
               enabled(1)
             }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
        "The enabled/disabled fast span uplink status of the port."
     ::= { snSwPortInfoEntry 49 }

snSwPortVlanId OBJECT-TYPE
     SYNTAX  INTEGER (0..4095)
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
        "The ID of a VLAN of which this port is a member. Port must
        be untagged. For tagged port which belongs to multiple
        VLANs, this object return 0 which is an invalid VLAN ID
        value."
     ::= { snSwPortInfoEntry 50 }

snSwPortRouteOnly OBJECT-TYPE
     SYNTAX  INTEGER { disabled(0), enabled(1) }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
        "Enable/Disable L2 switching of a routing switch port.
		By default, the routing switch performs routing first.
		If routing failed, it performs switching. Enable route
		only instrcuts the routing switch to perform routing
		only. For a L2 switching only product, reading this
		object always return 'disabled', writing 'enabled' to
		this object takes no effect."
     DEFVAL { disabled }
     ::= { snSwPortInfoEntry 51 }

snSwPortPresent OBJECT-TYPE
     SYNTAX  INTEGER {
               false(0),
               true(1)
             }
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        "Indicate if the port is absent or present.
		 This object only valid for M4 module
		 "
     ::= { snSwPortInfoEntry 52 }

snSwPortGBICStatus OBJECT-TYPE
     SYNTAX  INTEGER {
               gbic(1),
               miniGBIC(2),
               empty(3),
               other(4)
             }
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        "Indicate if the gig port has GBICs on them.
		 If set to  GBIC(1), it means that the port is GBIC.
		 If set to  miniGBIC(2), it means that the port miniGBIC.
		 If set to empty(3), it means that the GBIC is missing.
		 Value other(4) means that the port not a removable gig port.
		 "
     ::= { snSwPortInfoEntry 53 }

snSwPortStatsInKiloBitsPerSec OBJECT-TYPE
    SYNTAX  Unsigned32
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"Bit rate in kilobits per second received on the 10G and faster interface
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 54 }


snSwPortStatsOutKiloBitsPerSec OBJECT-TYPE
    SYNTAX  Unsigned32
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    	"Bit rate in kilobits per second transmitted out of the 10G and faster interface
    	over a 5 minutes interval."
    ::= { snSwPortInfoEntry 55 }

snSwPortLoadInterval OBJECT-TYPE
     SYNTAX  INTEGER (30..300)
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
        "The time in seconds for which average port utilization should be carried out.
        The value should be incremental of 30 seconds, between the ranges specified."
     DEFVAL { 300 }
     ::= { snSwPortInfoEntry 56 }

snSwPortTagType OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
		"The IEEE802.1q tag type embedded in the length/type field of
		an Ethernet packet. It specifies that the 2 octets after the
		length/type field in an Ethernet packet is the tag value."
     DEFVAL { 33024 }
     ::= { snSwPortInfoEntry 57 }


-- Interface ID Registration Group

snInterfaceId      OBJECT IDENTIFIER ::= { snSwPortInfo 2 }

-- Interface ID to ifIndex Lookup Table
-- Given an interface ID, this table returns the ifIndex value.
-- 
-- Note: This table does not behave like most SNMP tables.  It does not
-- support GetNext.  If you try to walk the table using GetNext, no rows
-- will be returned.  The contents of the table can only be accessed
-- using Get operations.  The table is useful for mapping a known
-- interface to the corresponding ifIndex value.

snInterfaceLookupTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnInterfaceLookupEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		""
	::= { snSwPortInfo 3 }

snInterfaceLookupEntry OBJECT-TYPE
	SYNTAX  SnInterfaceLookupEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		""
	INDEX { snInterfaceLookupInterfaceId }
	::= { snInterfaceLookupTable 1 }

SnInterfaceLookupEntry ::= SEQUENCE {
	snInterfaceLookupInterfaceId
		InterfaceId,
	snInterfaceLookupIfIndex
	    INTEGER
	}

snInterfaceLookupInterfaceId OBJECT-TYPE
     SYNTAX  InterfaceId
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        ""
     ::= { snInterfaceLookupEntry 1 }

snInterfaceLookupIfIndex OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        ""
     ::= { snInterfaceLookupEntry 2 }


-- ifIndex to Interface ID Lookup Table
-- Given an ifIndex, this table returns the interface ID value.

snIfIndexLookupTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnIfIndexLookupEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		""
	::= { snSwPortInfo 4 }

snIfIndexLookupEntry OBJECT-TYPE
	SYNTAX  SnIfIndexLookupEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		""
	INDEX { snIfIndexLookupIfIndex }
	::= { snIfIndexLookupTable 1 }

SnIfIndexLookupEntry ::= SEQUENCE {
	snIfIndexLookupIfIndex
	    INTEGER,
	snIfIndexLookupInterfaceId
		InterfaceId
	}

snIfIndexLookupIfIndex OBJECT-TYPE
     SYNTAX  INTEGER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        ""
     ::= { snIfIndexLookupEntry 1 }

snIfIndexLookupInterfaceId OBJECT-TYPE
     SYNTAX  InterfaceId
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
        ""
     ::= { snIfIndexLookupEntry 2 }


--      Forwarding Database Group
--
-- This group contains information relevant to 
-- the forwarding database in the system.



-- The Forward Database Static Table Information
--
-- This table contains all MAC addresses in the system. Static 
-- stations may be configured.


snFdbTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnFdbEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"This table contains snFdb information for each station
		known to the system, one entry per station." 
	::= { snFdbInfo 1 }

snFdbEntry OBJECT-TYPE
	SYNTAX  SnFdbEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"Each entry represents the information of a static MAC station." 
	INDEX   { 
		snFdbStationIndex
	}
	::= { snFdbTable 1 }


SnFdbEntry ::= SEQUENCE {
    snFdbStationIndex
		INTEGER,
    snFdbStationAddr
	    PhysAddress,
	snFdbStationPort
		INTEGER,
	snFdbVLanId
		INTEGER,
	snFdbStationQos
		INTEGER,
	snFdbStationType
		INTEGER,
	snFdbRowStatus
		INTEGER
	}

snFdbStationIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..256)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The FDB Station index to the Fdb Station Table."
	::= { snFdbEntry 1 }

snFdbStationAddr OBJECT-TYPE
	SYNTAX  PhysAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The snFdbs physical address. The physical address 
		represents a MAC Station."
	::= { snFdbEntry 2 }


snFdbStationPort OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Station slot/port number. 
		 The bit 0 to bit 7: port number. 
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snFdbEntry 3 }


snFdbVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Station VLan ID."
	::= { snFdbEntry 4 }

snFdbStationQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Stand alone stackable station Qos Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron switch station Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snFdbEntry 5 }

snFdbStationType OBJECT-TYPE
	SYNTAX  INTEGER {
		notSupported(0),
		host(1),
		router(2)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The station type values are:
		 notSupported    -- a read value only : this product does not 
		                    support MultiLayer Switching.
		 host    -- any MAC station.
		 router  -- a router-typed station."
	::= { snFdbEntry 6 }

snFdbRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snFdbEntry 7 }


-- Port STP Configuration Group


snPortStpTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnPortStpEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A specific snPortStpTable consists of a number of 
		 switch ports. This table only exists if only if
		 snVLanByPortTable exists and snVLanByPortStpMode is
		 enabled for each VLAN."
	::= { snPortStpInfo 1 }

snPortStpEntry OBJECT-TYPE
	SYNTAX  SnPortStpEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the snPortStpTable indicates the 
		 configuration on a specified port. A SNMP SET PDU 
		 for a row of the snPortStpTable requires the entired 
		 sequence of the MIB Objects in each 
		 snPortStpEntry stored in one PDU.  Otherwise, 
	 	 GENERR return-value will be returned."
	INDEX   { 
			snPortStpVLanId,	
			snPortStpPortNum
	}
	::= { snPortStpTable 1 }

SnPortStpEntry ::= SEQUENCE {
	snPortStpVLanId
		INTEGER,
	snPortStpPortNum
		INTEGER,
	snPortStpPortPriority
		INTEGER,
	snPortStpPathCost 
		INTEGER,
    snPortStpOperState
		INTEGER,
    snPortStpPortEnable
        INTEGER,
    snPortStpPortForwardTransitions
        Counter,
    snPortStpPortState
        INTEGER,
    snPortStpPortDesignatedCost
        INTEGER,
    snPortStpPortDesignatedRoot
        BridgeId,
    snPortStpPortDesignatedBridge
        BridgeId,
    snPortStpPortDesignatedPort
        OCTET STRING
	}

snPortStpVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID of the VLAN switch community." 
	::= { snPortStpEntry 1 }

snPortStpPortNum OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port number of the Switch. 
		 The bit 0 to bit 7: port number. 
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snPortStpEntry 2 }

snPortStpPortPriority OBJECT-TYPE
	SYNTAX  INTEGER (8..255)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
    "The value of the priority field which is
     contained in the first (in network byte order)
     octet of the (2 octet long) Port ID.  The other
     octet of the Port ID is given by the value of
     dot1dStpPort."
	::= { snPortStpEntry 3 }

snPortStpPathCost OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
	"dot1dStpPortPathCost : The contribution of this 
	 port to the path cost of paths towards the spanning 
	 tree root which include this port.  802.1D-1990 
	 recommends that the default value of this parameter 
	 be in inverse proportion to the speed of the 
	 attached LAN. Writing value zero to this object
	 sets path cost to a default value which automatically
	 changes according to port speed. Reading value zero
	 indicates an unknown path cost value because port
	 speed cannot be determined due to speed auto sense
	 in progress."
	::= { snPortStpEntry 4 }


snPortStpOperState OBJECT-TYPE
	SYNTAX  INTEGER {
		notActivated(0),             
		activated(1)
		}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"By default, this mode is set to notActivated(0).
		 notActivated(0)...the Port STP entry is not activated and not in running mode.
		 activated(1)......the Port STP entry is activated and in running mode"  
	::= { snPortStpEntry 5 }

snPortStpPortEnable OBJECT-TYPE
    SYNTAX  INTEGER {
              enabled(1),
              disabled(2)
            }
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
    "The enabled/disabled status of the port."
	::= { snPortStpEntry 6 }

snPortStpPortForwardTransitions OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
    "The number of times this port has transitioned
     from the Learning state to the Forwarding state."
	::= { snPortStpEntry 7 }

snPortStpPortState OBJECT-TYPE
    SYNTAX  INTEGER {
              disabled(1),
              blocking(2),
              listening(3),
              learning(4),
              forwarding(5),
              broken(6)
            }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The port's current state as defined by
     application of the Spanning Tree Protocol.  This
     state controls what action a port takes on
     reception of a frame.  If the bridge has detected
     a port that is malfunctioning it will place that
     port into the broken(6) state.  For ports which
     are disabled (see dot1dStpPortEnable), this object
     will have a value of disabled(1)."
	::= { snPortStpEntry 8 }

snPortStpPortDesignatedCost OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The path cost of the Designated Port of the
     segment connected to this port.  This value is
     compared to the Root Path Cost field in received
     bridge PDUs."
	::= { snPortStpEntry 9 }


snPortStpPortDesignatedRoot OBJECT-TYPE
    SYNTAX  BridgeId
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The unique Bridge Identifier of the Bridge
     recorded as the Root in the Configuration BPDUs
     transmitted by the Designated Bridge for the
     segment to which the port is attached."
	::= { snPortStpEntry 10 }

snPortStpPortDesignatedBridge OBJECT-TYPE
    SYNTAX  BridgeId
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The Bridge Identifier of the bridge which this
     port considers to be the Designated Bridge for
     this port's segment."
	::= { snPortStpEntry 11 }

snPortStpPortDesignatedPort OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (2))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
    "The Port Identifier of the port on the Designated
     Bridge for this port's segment."
	::= { snPortStpEntry 12 }



-- Trunk Port Configuration Group


snTrunkTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnTrunkEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A specific snTrunkTable consists of a number of 
		 Trunk port-mask." 
	::= { snTrunkInfo 1 }

snTrunkEntry OBJECT-TYPE
	SYNTAX  SnTrunkEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the snTrunkTable indicates the 
		 configuration on a specified Trunk port membership." 
	INDEX   { 
		snTrunkIndex
	}
	::= { snTrunkTable 1 }

SnTrunkEntry ::= SEQUENCE {
	snTrunkIndex
		INTEGER,
	snTrunkPortMask
		PortMask,
	snTrunkType
		INTEGER
	}

snTrunkIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..64)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The number of the trunk entries can be configured."
	::= { snTrunkEntry 1 }


snTrunkPortMask OBJECT-TYPE
	SYNTAX  PortMask
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Trunk membership of the Switch." 
	::= { snTrunkEntry 2 }


snTrunkType OBJECT-TYPE
	SYNTAX  INTEGER {
		switch(1),
	    server(2)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The trunk connection type which specifies what
		device the trunk ports are connected to."
	::= { snTrunkEntry 3 }


-- Multi-slot Trunk Port Configuration Group


snMSTrunkTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMSTrunkEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A table contains the configuration of port members of
		multi-slot trunk groups."
	::= { snTrunkInfo 2 }

snMSTrunkEntry OBJECT-TYPE
	SYNTAX  SnMSTrunkEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the snMSTrunkTable."
	INDEX {snMSTrunkPortIndex}
	::= { snMSTrunkTable 1 }

SnMSTrunkEntry ::= SEQUENCE {
	snMSTrunkPortIndex
		INTEGER,
	snMSTrunkPortList
		OCTET STRING,
	snMSTrunkType
		INTEGER,
	snMSTrunkRowStatus
		INTEGER
	}

snMSTrunkPortIndex OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The primary port of a trunk group. For module with Gig ports,
		primary port is port 1, 3, 5, 7. For module with 10/100 ports,
		primary port is port 1, 5, 9, 13, 17, 21."
	::= { snMSTrunkEntry 1 }


snMSTrunkPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A list of port indices which are the port membership
		of a trunk group. Each port index is a 16-bit integer
		in big endian order. The first port index must be the
		primary port index."
	::= { snMSTrunkEntry 2 }


snMSTrunkType OBJECT-TYPE
	SYNTAX  INTEGER {
		switch(1),
	    server(2)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The trunk connection type which specifies what
		device the trunk ports are connected to."
	::= { snMSTrunkEntry 3 }


snMSTrunkRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To create or delete a table entry."
	::= { snMSTrunkEntry 4 }


-- Switch Configuration Summary Group


snSwSummaryMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Switch Group Configuration Summary is configured 
		 either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate Switch Configuration Summary.
		 disabled(0)..........no Switch Configuration Summary."
	::= { snSwSummary 1 }


--- DHCP Gateway List Table


snDhcpGatewayListTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnDhcpGatewayListEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A table of DHCP gateway list of addresses."
	::= { snDhcpGatewayListInfo 1 }

snDhcpGatewayListEntry             OBJECT-TYPE
	SYNTAX  SnDhcpGatewayListEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the IP Port Address table."
	INDEX   { snDhcpGatewayListId }
	::= { snDhcpGatewayListTable 1 }

SnDhcpGatewayListEntry ::= SEQUENCE {
	snDhcpGatewayListId
		INTEGER,
	snDhcpGatewayListAddrList
		OCTET STRING,
	snDhcpGatewayListRowStatus
		INTEGER
	}


snDhcpGatewayListId                 OBJECT-TYPE
	SYNTAX  INTEGER (1..32)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The ID for a DHCP gateway list entry."
	::= { snDhcpGatewayListEntry 1 }

snDhcpGatewayListAddrList          OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(4..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The DHCP gateway address list for each DHCP gateway list ID.
		This list contains 1 to 8 IP addresses represented by octet string."
	::= { snDhcpGatewayListEntry 2 }

snDhcpGatewayListRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row or modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snDhcpGatewayListEntry 3 }


-- DNS MIB Group 

snDnsDomainName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..80))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"DNS Domain Name string."
	::= { snDnsInfo 1 }

snDnsGatewayIpAddrList OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(16))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The DNS Gateway IP address list. This list contains 4 
		IP addresses represented by octet string."
	::= { snDnsInfo 2 }

-- MAC filter table

snMacFilterTable       OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMacFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"MAC filter table."
	::= { snMacFilter 1 }

snMacFilterEntry       OBJECT-TYPE
	SYNTAX  SnMacFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the MAC filter table."
	INDEX   { snMacFilterIndex }
	::= { snMacFilterTable 1 }

SnMacFilterEntry ::= SEQUENCE {
	snMacFilterIndex
		INTEGER,
	snMacFilterAction              
		INTEGER,
	snMacFilterSourceMac
		MacAddress,
	snMacFilterSourceMask
		MacAddress,
	snMacFilterDestMac
		MacAddress,
	snMacFilterDestMask
		MacAddress,
	snMacFilterOperator
		INTEGER,
	snMacFilterFrameType
		INTEGER,
	snMacFilterFrameTypeNum
		INTEGER,
	snMacFilterRowStatus
		INTEGER
	}

snMacFilterIndex       OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index for a filter entry."
	::= { snMacFilterEntry 1 }

snMacFilterAction      OBJECT-TYPE
	SYNTAX  INTEGER { deny(0), permit(1) } 
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Action to take if the Mac packet match
		with this filter."
	::= { snMacFilterEntry 2 }

snMacFilterSourceMac    OBJECT-TYPE
	SYNTAX  MacAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Source MAC address."
	::= { snMacFilterEntry 3 }

snMacFilterSourceMask  OBJECT-TYPE
	SYNTAX  MacAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Source MAC subnet mask."
	::= { snMacFilterEntry 4 }

snMacFilterDestMac      OBJECT-TYPE
	SYNTAX  MacAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Destination MAC address."
	::= { snMacFilterEntry 5 }

snMacFilterDestMask    OBJECT-TYPE
	SYNTAX  MacAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Destination MAC subnet mask."
	::= { snMacFilterEntry 6 }

snMacFilterOperator    OBJECT-TYPE
	SYNTAX  INTEGER { equal(0), notEqual(1), less(2), greater(3) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Type of comparison to perform."
	::= { snMacFilterEntry 7 }

snMacFilterFrameType     OBJECT-TYPE
	SYNTAX  INTEGER{ notUsed(0), ethernet(1), llc(2), snap(3) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Frame Type: ethernet-type, LLC and SNAP types"
	::= { snMacFilterEntry 8 }

snMacFilterFrameTypeNum     OBJECT-TYPE
	SYNTAX  INTEGER(0..65535)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Frame Type Number. 0 means NA"
	::= { snMacFilterEntry 9 }

snMacFilterRowStatus   OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4),
	    modify(5)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snMacFilterEntry 10 }

-- MAC Filter Port access table

snMacFilterPortAccessTable           OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMacFilterPortAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"MAC Filter port access table."
	::= { snMacFilter 2 }

snMacFilterPortAccessEntry           OBJECT-TYPE
	SYNTAX  SnMacFilterPortAccessEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the MAC Filter Port access table."
	INDEX   { snMacFilterPortAccessPortIndex }
	::= { snMacFilterPortAccessTable 1 }

SnMacFilterPortAccessEntry ::= SEQUENCE {
	snMacFilterPortAccessPortIndex
		INTEGER,
	snMacFilterPortAccessFilters
		OCTET STRING,
	snMacFilterPortAccessRowStatus
		INTEGER
	}

snMacFilterPortAccessPortIndex               OBJECT-TYPE
	SYNTAX  INTEGER (1..3900)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index.
		For FastIron/NetIron products, port index value is from 1 to 42
		For BigIron products, port index is an encoded number:
		The bit 0 to bit 7: port number.
		The bit 8 to bit 11: slot number.
		For virtual router interface, slot number is 15,
		port number is the virtual router port from 1 to 60.
		Therefore, port index value for BigIron is from 257 to 3900."
	::= { snMacFilterPortAccessEntry 1 }

snMacFilterPortAccessFilters                 OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"1st octet correspond to 1st filter 
		number and so on."
	::= { snMacFilterPortAccessEntry 2 }

snMacFilterPortAccessRowStatus       OBJECT-TYPE
	SYNTAX	 INTEGER {
	    invalid(1),
	    valid(2),
	    delete(3),
	    create(4)
	}
	ACCESS	 read-write
	STATUS	 mandatory
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
		      rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snMacFilterPortAccessEntry 3 }

-- NTP general group

snNTPGeneral               OBJECT IDENTIFIER ::= { snNTP 1 }

snNTPPollInterval          OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Interval specifies how often to poll the NTP server.
		Each unit is one second."
    DEFVAL  { 1800 }
	::= { snNTPGeneral 1 }

snNTPTimeZone              OBJECT-TYPE
	SYNTAX  INTEGER {
		alaska(0),
		aleutian(1),
		arizona(2),
		central(3),
		eastIndiana(4),
		eastern(5),
		hawaii(6),
		michigan(7),
		mountain(8),
		pacific(9),
		samoa(10),
		gmtPlus12(11),
		gmtPlus11(12),
		gmtPlus10(13),
		gmtPlus9(14),
		gmtPlus8(15),
		gmtPlus7(16),
		gmtPlus6(17),
		gmtPlus5(18),
		gmtPlus4(19),
		gmtPlus3(20),
		gmtPlus2(21),
		gmtPlus1(22),
		gmt(23),
		gmtMinus1(24),
		gmtMinus2(25),
		gmtMinus3(26),
		gmtMinus4(27),
		gmtMinus5(28),
		gmtMinus6(29),
		gmtMinus7(30),
		gmtMinus8(31),
		gmtMinus9(32),
		gmtMinus10(33),
		gmtMinus11(34),
		gmtMinus12(35) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Time zone."
    DEFVAL  { gmt }
	::= { snNTPGeneral 2 }

snNTPSummerTimeEnable      OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled (1) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/Disable daylight saving time. This enables daylight
		saving time for time/date starting 02:00:00 of first Sunday
		in April and ending 02:00:00 of last Sunday in October every
		year."
    DEFVAL  { disabled }
	::= { snNTPGeneral 3 }

snNTPSystemClock           OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (7))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"System clock, in the following format:
		octet   0: seconds after the minute [0-60]
		octet   1: minutes after the hour [0-59]
		octet   2: hours since midnight [0-23]
		octet   3: day of the month [1-31]
		octet   4: months since January [0-11]
		octet   5: years since 1900
		octet   6: days since Sunday [0-6]
		Setting this object requires valid value in octets 0 to 5,
		and zero in octet 6. System clock can be disabled by setting
		zero to all octets."
	::= { snNTPGeneral 4 }

snNTPSync                  OBJECT-TYPE
	SYNTAX  INTEGER { other(1), synchronize(2) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Initiate time synchronization to the NTP servers.
		For set operation, only 'synchronize(2)' is accepted.
		For get operation, always return 'other(1)'."
	::= { snNTPGeneral 5 }

-- NTP server table

snNTPServerTable           OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnNTPServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"NTP (Network Time Protocol) server table."
	::= { snNTP 2 }

snNTPServerEntry           OBJECT-TYPE
	SYNTAX  SnNTPServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the NTP server table."
	INDEX   { snNTPServerIp }
	::= { snNTPServerTable 1 }

SnNTPServerEntry ::= SEQUENCE {
	snNTPServerIp
		IpAddress,
	snNTPServerVersion
		INTEGER,
	snNTPServerRowStatus
		INTEGER
	}

snNTPServerIp              OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"NTP server IP address."
	::= { snNTPServerEntry 1 }

snNTPServerVersion         OBJECT-TYPE
	SYNTAX  INTEGER (1..4)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"NTP server version."
    DEFVAL  { 1 }
	::= { snNTPServerEntry 2 }

snNTPServerRowStatus       OBJECT-TYPE
	SYNTAX	INTEGER {
	    other(1),
	    valid(2),
	    delete(3),
	    create(4) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To create or delete a NTP server table entry."
	::= { snNTPServerEntry 3 }

-- Radius general group

snRadiusGeneral            OBJECT IDENTIFIER ::= { snRadius 1 }

snRadiusSNMPAccess         OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled(1) }
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Indicate whether Radius group MIB obejcts can be
		accessed by SNMP manager. If value is disabled,
		all Radius group MIB objects return 'general error'."
    DEFVAL  { disabled }
	::= { snRadiusGeneral 1 }

snRadiusEnableTelnetAuth   OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled(1) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/Disable telnet authentication specified
		by 'snRadiusLoginMethod'."
    DEFVAL  { disabled }
	::= { snRadiusGeneral 2 }

snRadiusRetransmit         OBJECT-TYPE
	SYNTAX  INTEGER (0..5)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The number of authentication query retransmissions
		to the Radius server."
    DEFVAL  { 3 }
	::= { snRadiusGeneral 3 }

snRadiusTimeOut            OBJECT-TYPE
	SYNTAX  INTEGER (1..15)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Interval specifies how long to wait for authentication
		reply from the Radius server, each unit is one second."
    DEFVAL  { 3 }
	::= { snRadiusGeneral 4 }

snRadiusDeadTime           OBJECT-TYPE
	SYNTAX  INTEGER (1..5)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Interval specifies Radius server dead time,
		each unit is one minute."
    DEFVAL  { 3 }
	::= { snRadiusGeneral 5 }

snRadiusKey                OBJECT-TYPE
	SYNTAX  DisplayString (SIZE(0..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Authentication key displayed as encrypted text."
	::= { snRadiusGeneral 6 }

snRadiusLoginMethod        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user login process. Each octet
		has the following enumeration value:
		  enable(1) - authenticate by command line interface
		              enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 7 }

snRadiusEnableMethod       OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user entering priviledge mode
		of the command line interface. Each octet has the following
		enumeration value:
		  enable(1) - authenticate by command line interface
		              enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 8 }

snRadiusWebServerMethod    OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user accessing the web-server.
		Each octet has the following enumeration value:
		  enable(1) - authenticate by command line interface
		              enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 9 }

snRadiusSNMPServerMethod   OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user accessing the snmp-server.
		Each octet has the following enumeration value:
		  enable(1) - authenticate by command line interface
		              enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 10 }

-- Radius server table

snRadiusServerTable        OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRadiusServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"Radius server table."
	::= { snRadius 2 }

snRadiusServerEntry        OBJECT-TYPE
	SYNTAX  SnRadiusServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the Radius server table."
	INDEX   { snRadiusServerIp }
	::= { snRadiusServerTable 1 }

SnRadiusServerEntry ::= SEQUENCE {
	snRadiusServerIp
		IpAddress,
	snRadiusServerAuthPort
		INTEGER,
	snRadiusServerAcctPort
		INTEGER,
	snRadiusServerRowStatus
		INTEGER,
	snRadiusServerRowKey
		DisplayString,
	snRadiusServerUsage
		INTEGER
	}

snRadiusServerIp           OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Radius server IP address."
	::= { snRadiusServerEntry 1 }

snRadiusServerAuthPort     OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Authentication UDP port number."
    DEFVAL  { 1645 }
	::= { snRadiusServerEntry 2 }

snRadiusServerAcctPort     OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Account UDP port number."
    DEFVAL  { 1646 }
	::= { snRadiusServerEntry 3 }

snRadiusServerRowStatus    OBJECT-TYPE
	SYNTAX	INTEGER {
	    other(1),
	    valid(2),
	    delete(3),
	    create(4) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To create or delete a Radius server table entry."
	::= { snRadiusServerEntry 4 }

snRadiusServerRowKey       OBJECT-TYPE
	SYNTAX  DisplayString (SIZE(0..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Authentication key displayed as encrypted text."
	::= { snRadiusServerEntry 5 }

snRadiusServerUsage    OBJECT-TYPE
	SYNTAX	INTEGER {
	    default(1),
	    authentication-only(2),
	    authorization-only(3),
	    accounting-only(4) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To allow this server to be dedicated for a particular AAA activity."
	::= { snRadiusServerEntry 6 }

--- Tacacs General MIBs

snTacacsGeneral            OBJECT IDENTIFIER ::= { snTacacs 1 }

snTacacsRetransmit         OBJECT-TYPE
	SYNTAX  INTEGER (0..5)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The number of authentication query retransmissions
		to the Tacacs server."
    DEFVAL  { 3 }
	::= { snTacacsGeneral 1 }

snTacacsTimeOut            OBJECT-TYPE
	SYNTAX  INTEGER (1..15)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Interval specifies how long to wait for authentication
		reply from the Tacacs server, each unit is one second."
    DEFVAL  { 3 }
	::= { snTacacsGeneral 2 }

snTacacsDeadTime           OBJECT-TYPE
	SYNTAX  INTEGER (1..5)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Interval specifies Tacacs server dead time,
		each unit is one minute."
    DEFVAL  { 3 }
	::= { snTacacsGeneral 3 }

snTacacsKey                OBJECT-TYPE
	SYNTAX  DisplayString (SIZE(0..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Authentication key displayed as encrypted text."
	::= { snTacacsGeneral 4 }

snTacacsSNMPAccess         OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled(1) }
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Indicate whether Tacacs group MIB obejcts can be
		accessed by SNMP manager. If value is disabled,
		all Tacacs group MIB objects return 'general error'."
    DEFVAL  { disabled }
	::= { snTacacsGeneral 5 }

-- Tacacs server table

snTacacsServerTable        OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnTacacsServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
 		"Tacacs server table."
	::= { snTacacs 2 }

snTacacsServerEntry        OBJECT-TYPE
	SYNTAX  SnTacacsServerEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the Tacacs server table."
	INDEX   { snTacacsServerIp }
	::= { snTacacsServerTable 1 }

SnTacacsServerEntry ::= SEQUENCE {
	snTacacsServerIp
		IpAddress,
	snTacacsServerAuthPort
		INTEGER,
	snTacacsServerRowStatus
		INTEGER,
	snTacacsServerRowKey
		DisplayString,
	snTacacsServerUsage
		INTEGER
	}

snTacacsServerIp           OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Tacacs server IP address."
	::= { snTacacsServerEntry 1 }

snTacacsServerAuthPort     OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Authentication UDP port number."
    DEFVAL  { 49 }
	::= { snTacacsServerEntry 2 }

snTacacsServerRowStatus    OBJECT-TYPE
	SYNTAX	INTEGER {
	    other(1),
	    valid(2),
	    delete(3),
	    create(4) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To create or delete a Tacacs server table entry."
	::= { snTacacsServerEntry 3 }

snTacacsServerRowKey       OBJECT-TYPE
	SYNTAX  DisplayString (SIZE(0..32))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Authentication key displayed as encrypted text."
	::= { snTacacsServerEntry 4 }

snTacacsServerUsage    OBJECT-TYPE
	SYNTAX	INTEGER {
	    default(1),
	    authentication-only(2),
	    authorization-only(3),
	    accounting-only(4) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To allow this server to be dedicated for a particular AAA activity."
	::= { snTacacsServerEntry 5 }

-- QOS Profile Group

snQosProfileTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnQosProfileEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A table contains the configuration of qos profile 
		 groups."
	::= { snQos 1 }

snQosProfileEntry OBJECT-TYPE
	SYNTAX  SnQosProfileEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the snQosProfileTable."
	INDEX {snQosProfileIndex}
	::= { snQosProfileTable 1 }

SnQosProfileEntry ::= SEQUENCE {
	snQosProfileIndex
		INTEGER,
	snQosProfileName
		DisplayString,
	snQosProfileRequestedBandwidth
		INTEGER,
	snQosProfileCalculatedBandwidth
		INTEGER
	}

snQosProfileIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..4)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index of QOS Profile." 
	::= { snQosProfileEntry 1 }

snQosProfileName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Qos Profile Name string."
	::= { snQosProfileEntry 2 }

snQosProfileRequestedBandwidth OBJECT-TYPE
	SYNTAX  INTEGER (0..100)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Qos Profile Requested Bandwidth."
	::= { snQosProfileEntry 3 }

snQosProfileCalculatedBandwidth OBJECT-TYPE
	SYNTAX  INTEGER (0..100)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Qos Profile Calculated Bandwidth."
	::= { snQosProfileEntry 4 }

-- QOS Bind Group

snQosBindTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnQosBindEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"A table contains the configuration of 802.1p to qos profile 
		 binding groups."
	::= { snQos 2 }

snQosBindEntry OBJECT-TYPE
	SYNTAX  SnQosBindEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry of the snQosBindTable."
	INDEX {snQosBindIndex}
	::= { snQosBindTable 1 }

SnQosBindEntry ::= SEQUENCE {
	snQosBindIndex
		INTEGER,
	snQosBindPriority
		INTEGER,
	snQosBindProfileIndex
		INTEGER
	}

snQosBindIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..8)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index of QOS Bind."
	::= { snQosBindEntry 1 }

snQosBindPriority OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		 "QOS bind priority."
	::= { snQosBindEntry 2 }

snQosBindProfileIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..4)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"QOS Bind Profile Index. This is pointer to the
		index of snQosProfile Table." 
	::= { snQosBindEntry 3 }

-- AAA Mib

snAuthentication			OBJECT IDENTIFIER ::= { snAAA 1 }
snAuthorization				OBJECT IDENTIFIER ::= { snAAA 2 }
snAccounting				OBJECT IDENTIFIER ::= { snAAA 3 }

snAuthorizationCommandMethods        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of authorization methods. Each octet represents
		a method to authorize the user command. Each octet
		has the following value:
		  radius(2) - authorize by requesting radius server
		  tacplus(5) - authorize by requesting tacplus server
		  none(6) - skip authorization
		Setting a zero length octet string invalidates all
		previous authorization methods."
	::= { snAuthorization 1 }

snAuthorizationCommandLevel OBJECT-TYPE
	SYNTAX  INTEGER {
                 level0(0),
                 level4(4),
				 level5(5)
                    }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Commands, which are equal to and less than the specified
		command level here needs to be authorized. Possible enumeration
		values:
		0 - Privilege level 0
		4 - Privilege level 4
		5 - Privilege level 5." 
	::= { snAuthorization 2 }

snAuthorizationExec        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of exec authorization methods. Each octet represents
		a method for telnet or SSH login authorization. Each octet
		has the following enumeration value:
		  radius(2) - send exec authorization request to radius server
		  tacplus(5) - send exec authorization request to tacplus server
		  none(6) - no exec authorization
		Setting a zero length octet string invalidates all
		authorization methods."
	::= { snAuthorization 3 }


snAccountingCommandMethods        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of accounting methods. Each octet represents
		a method to account for the user command. Each octet
		has the following enumeration value:
		  radius(2) - send accounting info to radius server
		  tacplus(5) - send accounting info to tacplus server
		  none(6) - skip accounting
		Setting a zero length octet string invalidates all
		previous accounting methods."
	::= { snAccounting 1 }

snAccountingCommandLevel OBJECT-TYPE
	SYNTAX  INTEGER {
                 level0(0),
                 level4(4),
				 level5(5)
                    }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Commands, which are equal to and less than the specified
		command level here will be accounted. Possible enumeration
		values:
		level0 - Privilege level 0
		level4 - Privilege level 4
		level5 - Privilege level 5." 
	::= { snAccounting 2 }

snAccountingExec        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of accounting methods. Each octet represents
		a method for telnet or SSH login accounting. Each octet
		has the following enumeration value:
		  radius(2) - send accounting info to radius server
		  tacplus(5) - send accounting info to tacplus server
		  none(6) - skip accounting
		Setting a zero length octet string invalidates all
		previous accounting methods."
	::= { snAccounting 3 }

snAccountingSystem        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"A sequence of accounting methods. Each octet represents
		a method to account for the system related events. Each octet
		has the following enumeration value:
		  radius(2) - send accounting info to radius server
		  tacplus(5) - send accounting info to tacplus server
		  none(6) - skip accounting
		Setting a zero length octet string invalidates all
		previous accounting methods."
	::= { snAccounting 4 }

-- NetFlow Mib

snNetFlowGlb	OBJECT IDENTIFIER ::= { snNetFlow 1 }

snNetFlowGblEnable OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Enable/disable NetFlow export operation."
    DEFVAL { disabled }
	::= { snNetFlowGlb 1 }

snNetFlowGblVersion OBJECT-TYPE
	SYNTAX	INTEGER { version1 (1), version5 (5) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"NetFlow export version."
    DEFVAL { version5 }
	::= { snNetFlowGlb 2 }

snNetFlowGblProtocolDisable OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"bit 0 - other, disable all protocols export except UDP and TCP
		 bit 1 - tcp, disable TCP protocol export
		 bit 2 - udp, disable UDP protocol export"
    DEFVAL { 0 }
	::= { snNetFlowGlb 3 }

snNetFlowGblActiveTimeout OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Maximum time an active flow can be in the NetFlow cache (minutes: 1..60)"
    DEFVAL { 60 }
	::= { snNetFlowGlb 4 }

snNetFlowGblInactiveTimeout OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600)"
    DEFVAL { 60 }
	::= { snNetFlowGlb 5 }


-- NetFlow Collector Table


snNetFlowCollectorTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnNetFlowCollectorEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of each NetFlow collector information."
	::= { snNetFlow 2 }

snNetFlowCollectorEntry OBJECT-TYPE
	SYNTAX	SnNetFlowCollectorEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the NetFlow collector table."
	INDEX	{ snNetFlowCollectorIndex }
	::= { snNetFlowCollectorTable 1 }

SnNetFlowCollectorEntry ::= SEQUENCE {
	snNetFlowCollectorIndex
		INTEGER,
	snNetFlowCollectorIp
		IpAddress,
	snNetFlowCollectorUdpPort
		INTEGER,
	snNetFlowCollectorSourceInterface
		INTEGER,
	snNetFlowCollectorRowStatus
		INTEGER
	}

snNetFlowCollectorIndex OBJECT-TYPE
	SYNTAX	INTEGER (1..10)
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index to the NetFlow collector table."
	::= { snNetFlowCollectorEntry 1 }

snNetFlowCollectorIp OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The NetFlow collector ip address."
	::= { snNetFlowCollectorEntry 2 }

snNetFlowCollectorUdpPort OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The NetFlow collector UDP port number."
	::= { snNetFlowCollectorEntry 3 }

snNetFlowCollectorSourceInterface OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The ifIndex value to specify source port to
		 export NetFlow packet. Value 0 to indicate
		 default outgoing port."
	::= { snNetFlowCollectorEntry 4 }


snNetFlowCollectorRowStatus OBJECT-TYPE
	SYNTAX	INTEGER	{
		other(1),
		valid(2),
		delete(3),
		create(4) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"To create or delete a NetFlow collector table entry."
	::= { snNetFlowCollectorEntry 5 }



-- NetFlow Aggregation Table


snNetFlowAggregationTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnNetFlowAggregationEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A table of each NetFlow aggregation scheme information."
	::= { snNetFlow 3 }

snNetFlowAggregationEntry OBJECT-TYPE
	SYNTAX	SnNetFlowAggregationEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the NetFlow Aggregation table."
	INDEX	{ snNetFlowAggregationIndex }
	::= { snNetFlowAggregationTable 1 }

SnNetFlowAggregationEntry ::= SEQUENCE {
	snNetFlowAggregationIndex
		INTEGER,
	snNetFlowAggregationIp
		IpAddress,
	snNetFlowAggregationUdpPort
		INTEGER,
	snNetFlowAggregationSourceInterface
		INTEGER,
	snNetFlowAggregationNumberOfCacheEntries
		INTEGER,
	snNetFlowAggregationActiveTimeout
		INTEGER,
	snNetFlowAggregationInactiveTimeout
		INTEGER,
    snNetFlowAggregationEnable
		INTEGER,
    snNetFlowAggregationRowStatus
		INTEGER
	}

snNetFlowAggregationIndex OBJECT-TYPE
	SYNTAX	INTEGER { as (1), protocolPort (2), destPrefix (3),
	                 sourcePrefix (4), prefix (5) }
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The Aggregation scheme ID"      
	::= { snNetFlowAggregationEntry 1 }

snNetFlowAggregationIp OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The NetFlow aggregation collector ip address."
	::= { snNetFlowAggregationEntry 2 }

snNetFlowAggregationUdpPort OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The NetFlow aggregation collector UDP port number."
	::= { snNetFlowAggregationEntry 3 }

snNetFlowAggregationSourceInterface OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The ifIndex value to specify source port to
		 export NetFlow aggregation packet.
		 Value 0 to indicate default outgoing port."
	::= { snNetFlowAggregationEntry 4 }

snNetFlowAggregationNumberOfCacheEntries OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Number of cache entries for aggregation scheme"
	::= { snNetFlowAggregationEntry 5 }

snNetFlowAggregationActiveTimeout OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Maximum time an active flow can be in
		 the aggregation cache"
	::= { snNetFlowAggregationEntry 6 }

snNetFlowAggregationInactiveTimeout OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Maximum time an inactive flow can be in
		 the aggregation cache"
	::= { snNetFlowAggregationEntry 7 }

snNetFlowAggregationEnable OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"Enable/disable NetFlow aggregation
		 for this aggregation scheme."
    DEFVAL { disabled }
	::= {  snNetFlowAggregationEntry 8 }

snNetFlowAggregationRowStatus OBJECT-TYPE
	SYNTAX	INTEGER	{
		other(1),
		valid(2),
		delete(3),
		create(4) }
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"To create or delete a NetFlow collector table entry."
	::= { snNetFlowAggregationEntry 9 }


-- NetFlow Interface Table

-- Table containing information about the switching
-- type in every interface.

snNetFlowIfTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnNetFlowIfEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A list of interface entries.  The number of entries
         is given by the value of ifNumber."
	::= { snNetFlow 4 }

snNetFlowIfEntry OBJECT-TYPE
	SYNTAX	SnNetFlowIfEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"Entry containing the type of switching performed
		 on that interface."
	INDEX	{ snNetFlowIfIndex }
	::= { snNetFlowIfTable 1 }

SnNetFlowIfEntry ::= SEQUENCE {
	snNetFlowIfIndex
		INTEGER,
	snNetFlowIfFlowSwitching
		INTEGER
	}

 snNetFlowIfIndex OBJECT-TYPE
       SYNTAX      INTEGER (1..65536)
       ACCESS      read-only
       STATUS      mandatory
       DESCRIPTION
           "A unique value, greater than zero, for each
            interface.  It is recommended that values are assigned
            contiguously starting from 1.  The value for each
            interface sub-layer must remain constant at least from
            one re-initialization of the entity's network
            management system to the next re-initialization."
       ::= { snNetFlowIfEntry 1 }

snNetFlowIfFlowSwitching OBJECT-TYPE
       SYNTAX      INTEGER { disabled (0), enabled (1) }
       ACCESS      read-write
       STATUS      mandatory
       DESCRIPTION
           "To enable/disable flow switching in a particular
		    interface:
			disable (0) - no flow switching
			enable  (1) - flow switching"
       ::= { snNetFlowIfEntry 2 }

-- sFlow Collector Table.

snSFlowGlb	OBJECT IDENTIFIER ::= { snSFlow 1 }

snSflowCollectorTable     OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnSflowCollectorEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"Table of all but first sFlow collectors. The first collector can be configured
		using sFlowTable in RFC 3176. The RFC cannot be used to configure more
		than one sFlow collectors. This table has been created to fill this gap."
	::= { snSFlow 2 }

snSflowCollectorEntry	OBJECT-TYPE
	SYNTAX	SnSflowCollectorEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A row in the sFlow collector table."
	INDEX	{ snSflowCollectorIndex }
	::= { snSflowCollectorTable 1 }

SnSflowCollectorEntry ::= SEQUENCE {
	snSflowCollectorIndex
		INTEGER,
	snSflowCollectorIP
		IpAddress,
	snSflowCollectorUDPPort
		INTEGER,
	snSflowCollectorRowStatus
		INTEGER
	}

snSflowCollectorIndex  OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The index to the sFlow collector table."
	::= { snSflowCollectorEntry 1 }

snSflowCollectorIP OBJECT-TYPE
	SYNTAX	IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The sFlow collector ip address."
	::= { snSflowCollectorEntry 2 }

snSflowCollectorUDPPort OBJECT-TYPE
	SYNTAX	INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The sFlow collector UDP port number."
	::= { snSflowCollectorEntry 3 }

snSflowCollectorRowStatus OBJECT-TYPE
	SYNTAX	INTEGER	{
		noSuch(0),
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"To create, update or delete a SFlow collector table entry.
		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snSflowCollectorEntry 4 }


snFdpMIBObjects OBJECT IDENTIFIER ::= { snFDP 1 }

snFdpInterface   OBJECT IDENTIFIER ::= { snFdpMIBObjects 1 }
snFdpCache       OBJECT IDENTIFIER ::= { snFdpMIBObjects 2 }
snFdpGlobal      OBJECT IDENTIFIER ::= { snFdpMIBObjects 3 }
snFdpCachedAddr  OBJECT IDENTIFIER ::= { snFdpMIBObjects 4 }

--
-- FDP Interface Group
--
snFdpInterfaceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF FdpInterfaceEntry
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "Status of FDP on the device's interfaces."
    ::= { snFdpInterface 1 }

snFdpInterfaceEntry OBJECT-TYPE
    SYNTAX     FdpInterfaceEntry
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "An entry in the snFdpInterfaceTable,
            having the status of FDP on an interface."
    INDEX      { snFdpInterfaceIfIndex }
    ::= { snFdpInterfaceTable 1 }

FdpInterfaceEntry ::= SEQUENCE {
    snFdpInterfaceIfIndex           INTEGER,
    snFdpInterfaceFdpEnable            INTEGER,
    snFdpInterfaceCdpEnable            INTEGER
}

snFdpInterfaceIfIndex OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "ifIndex value of the local interface."
    ::= { snFdpInterfaceEntry 1 }

snFdpInterfaceFdpEnable OBJECT-TYPE
    SYNTAX     INTEGER { false(0), true(1) }
    ACCESS     read-write
    STATUS     mandatory
    DESCRIPTION
            "The flag, whether the Foundry Discovery Protocol
            is currently running on this interface.  It has no
            effect when FDP is disabled (snFdpGlobalRun = FALSE)."
	DEFVAL { true }
    ::= { snFdpInterfaceEntry 2 }

snFdpInterfaceCdpEnable OBJECT-TYPE
    SYNTAX     INTEGER { false(0), true(1) }
    ACCESS     read-write
    STATUS     mandatory
    DESCRIPTION
            "The flag, whether the Cisco Discovery Protocol
            is currently running on this interface.  It has no
            effect when CDP is disabled (snCdpGlobalRun = FALSE)."
	DEFVAL { true }
    ::= { snFdpInterfaceEntry 3 }

--
-- FDP Cache Table
--

snFdpCacheTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF FdpCacheEntry
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "The table for the cached information obtained
             via receiving FDP/CDP messages."
    ::= { snFdpCache 1 }

snFdpCacheEntry OBJECT-TYPE
    SYNTAX     FdpCacheEntry
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "An entry in the snFdpCacheTable, having the information 
            received via FDP/CDP on one interface from one device.  
            Entries appear when a FDP/CDP advertisement is received
            from a neighbor device.
            Entries disappear when FDP/CDP is disabled on the interface, or globally."
    INDEX      { snFdpCacheIfIndex, snFdpCacheDeviceIndex }
    ::= { snFdpCacheTable 1 }

FdpCacheEntry ::= SEQUENCE {
    snFdpCacheIfIndex					INTEGER,
    snFdpCacheDeviceIndex				INTEGER,
    snFdpCacheDeviceId					DisplayString,
    snFdpCacheAddressType				INTEGER,
    snFdpCacheAddress					OCTET STRING,
    snFdpCacheVersion					DisplayString,
    snFdpCacheDevicePort				DisplayString,
    snFdpCachePlatform					DisplayString,
    snFdpCacheCapabilities				DisplayString, 
    snFdpCacheVendorId					INTEGER, 
	snFdpCacheIsAggregateVlan		INTEGER,
	snFdpCacheTagType				INTEGER,
	snFdpCachePortVlanMask		OCTET STRING,
	snFdpCachePortTagMode         INTEGER,
	snFdpCacheDefaultTrafficeVlanIdForDualMode  INTEGER
}

snFdpCacheIfIndex OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "ifIndex value of the local interface."
    ::= { snFdpCacheEntry 1 }

snFdpCacheDeviceIndex OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "Identification of a device, which sent FDP/CDP messages"
    ::= { snFdpCacheEntry 2 }

snFdpCacheDeviceId OBJECT-TYPE
    SYNTAX     DisplayString
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "The Device-ID string as reported in the most recent FDP/CDP
            message.  The zero-length string indicates no Device-ID
            field (TLV) was reported in the most recent FDP/CDP
            message."
    ::= { snFdpCacheEntry 3 }

snFdpCacheAddressType OBJECT-TYPE
    SYNTAX     INTEGER { ip(1), ipx(2), appletalk(3) }
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "An indication of the type of address contained in the
            corresponding instance of snFdpCacheAddress."
    ::= { snFdpCacheEntry 4 }

snFdpCacheAddress OBJECT-TYPE
    SYNTAX     OCTET STRING
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "The (first) network-layer address of the device
            as reported in the most recent FDP/CDP message
			in the following format:
              IP address:  4 octets, ip(1)
              IPX address: 10 octets, ipx(2)
                     First 4-octet as the network number
                     Second 6-octet as the host number
              Appletalk address: 3 octets, appletalk(3)
                     First 2-octet as the network number
                     Second 1-octet as the host number"
    ::= { snFdpCacheEntry 5 }

snFdpCacheVersion OBJECT-TYPE
    SYNTAX     DisplayString
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Version string as reported in the most recent FDP/CDP message. "
    ::= { snFdpCacheEntry 6 }


snFdpCacheDevicePort OBJECT-TYPE
    SYNTAX     DisplayString
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "The Port-ID string as reported in the most recent FDP/CDP
            message.  This will typically be the value of the ifName
            object (e.g., Ethernet0).  The zero-length string
            indicates no Port-ID field (TLV) was reported in the
            most recent FDP/CDP message."
    ::= { snFdpCacheEntry 7 }

snFdpCachePlatform OBJECT-TYPE
    SYNTAX     DisplayString
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "The Device's Hardware Platform as reported in the most
            recent FDP/CDP message.  The zero-length string indicates
            that no Platform field (TLV) was reported in the most
            recent FDP/CDP message."
    ::= { snFdpCacheEntry 8 }

snFdpCacheCapabilities OBJECT-TYPE
    SYNTAX     DisplayString
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "The Device's Functional Capabilities as reported in the
            most recent FDP/CDP message. "
    ::= { snFdpCacheEntry 9 }

snFdpCacheVendorId OBJECT-TYPE
    SYNTAX     INTEGER { fdp(1), cdp(2) }
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Indicates the entry received by either FDP or CDP."
    ::= { snFdpCacheEntry 10 }

snFdpCacheIsAggregateVlan OBJECT-TYPE
    SYNTAX     INTEGER { false(0), true(1) }
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Neighbor device is in aggregated-vlan."
    ::= { snFdpCacheEntry 11 }

snFdpCacheTagType OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Neighbor device tag-type."
    ::= { snFdpCacheEntry 12 }

snFdpCachePortVlanMask OBJECT-TYPE
    SYNTAX     OCTET STRING
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Neighbor device port VLAN masks in 512-byte octet string."
    ::= { snFdpCacheEntry 13 }

snFdpCachePortTagMode OBJECT-TYPE
    SYNTAX     INTEGER { untagged(1), tagged(2), dual(3) }
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Neighbor device port tag mode"
    ::= { snFdpCacheEntry 14 }

snFdpCacheDefaultTrafficeVlanIdForDualMode OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "Default traffic vlan id for neighbor device dual-mode port"
    ::= { snFdpCacheEntry 15 }

--
-- FDP Global Group
--   

snFdpGlobalRun OBJECT-TYPE
    SYNTAX     INTEGER { false(0), true(1) }
    ACCESS     read-write
    STATUS     mandatory
    DESCRIPTION
            "The flag, whether the Foundry Discovery Protocol
            is currently running.  FDP entries in snFdpCacheTable are
            deleted when FDP is disabled."
    DEFVAL     { false }
    ::= { snFdpGlobal 1 }

snFdpGlobalMessageInterval OBJECT-TYPE
    SYNTAX     INTEGER (5..900)
    ACCESS     read-write
    STATUS     mandatory
    DESCRIPTION
            "The interval at which FDP messages are to be generated.
            The default value is 60 seconds."
    DEFVAL     { 60 }
    ::= { snFdpGlobal 2 }

snFdpGlobalHoldTime OBJECT-TYPE
    SYNTAX     INTEGER (10..255)
    ACCESS     read-write
    STATUS     mandatory
    DESCRIPTION
            "The time for the receiving device holds FDP message.
            The default value is 180 seconds."
    DEFVAL     { 180 }
    ::= { snFdpGlobal 3 }

snFdpGlobalCdpRun OBJECT-TYPE
    SYNTAX     INTEGER { false(0), true(1) }
    ACCESS     read-write
    STATUS     mandatory
    DESCRIPTION
            "An indication of whether the Cisco Discovery Protocol
            is currently running.  CDP entries in snFdpCacheTable are
            deleted when CDP is disabled."
    DEFVAL     { false }
    ::= { snFdpGlobal 4 }

--
-- FDP Cached Address Entry Table
--
snFdpCachedAddressTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF FdpCachedAddressEntry
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "Cached address table from receiving FDP/CDP messages."
    ::= { snFdpCachedAddr 1 }

snFdpCachedAddressEntry OBJECT-TYPE
    SYNTAX     FdpCachedAddressEntry
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "An entry (conceptual row) in the snFdpCacheAddressTable,
            containing one cached address from FDP/CDP messages."
    INDEX      { snFdpCachedAddrIfIndex, snFdpCachedAddrDeviceIndex, snFdpCachedAddrDeviceAddrEntryIndex }
    ::= { snFdpCachedAddressTable 1 }

FdpCachedAddressEntry ::= SEQUENCE {
    snFdpCachedAddrIfIndex               INTEGER,
    snFdpCachedAddrDeviceIndex           INTEGER,
    snFdpCachedAddrDeviceAddrEntryIndex  INTEGER,
    snFdpCachedAddrType				     INTEGER,
    snFdpCachedAddrValue				 OCTET STRING
}

snFdpCachedAddrIfIndex OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "The ifIndex value of the local interface."
    ::= { snFdpCachedAddressEntry 1 }

snFdpCachedAddrDeviceIndex OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "A unique vlaue for each device from which FDP/CDP messages
			are being received."
    ::= { snFdpCachedAddressEntry 2 }

snFdpCachedAddrDeviceAddrEntryIndex OBJECT-TYPE
    SYNTAX     INTEGER
    ACCESS     not-accessible
    STATUS     mandatory
    DESCRIPTION
            "A unique vlaue for address entry in device from which FDP/CDP messages
			are being received."
    ::= { snFdpCachedAddressEntry 3 }

snFdpCachedAddrType OBJECT-TYPE
    SYNTAX     INTEGER { ip(1), ipx(2), appletalk(3) }
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
			"An indication of the type of address contained in the
            corresponding instance of snFdpCacheAddrValue."
	::= { snFdpCachedAddressEntry 4 }

snFdpCachedAddrValue OBJECT-TYPE
    SYNTAX     OCTET STRING
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
            "The network-layer address of the device
            SNMP-agent as reported in the most recent FDP/CDP message
			in the following format:
              IP address:  4 octets, ip(1)
              IPX address: 10 octets, ipx(2)
                     First 4-octet as the network number
                     Second 6-octet as the host number
              Appletalk address: 3 octets, appletalk(3)
                     First 2-octet as the network number
                     Second 1-octet as the host number"
    ::= { snFdpCachedAddressEntry 5 }

END