path: root/MIBS/hp/HP-ICF-SNMP-MIB

HP-ICF-SNMP-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        hpSwitch            
            FROM HP-ICF-OID            
        ifIndex, InterfaceIndexOrZero            
            FROM IF-MIB            
        InetAddressType, InetAddress            
            FROM INET-ADDRESS-MIB            
        OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP            
            FROM SNMPv2-CONF            
        Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE            
            FROM SNMPv2-SMI;


    -- 1.3.6.1.4.1.11.2.14.11.5.1.38
    hpicfSnmpMIB MODULE-IDENTITY 
        LAST-UPDATED "200708240000Z"      -- August 24, 2007 at 00:00 GMT
        ORGANIZATION 
            "Hewlett-Packard Company
            Procurve Networking Business"
        CONTACT-INFO 
            "Hewlett-Packard Company
            8000 Foothills Blvd.
            Roseville, CA 95747"
        DESCRIPTION 
            "This MIB module contains HP proprietary
            objects for managing SNMP entity."
        REVISION "200611110000Z"      -- November 11, 2006 at 00:00 GMT
        DESCRIPTION 
            "Updated description and changed InterfaceIndex                      
                    to InterfaceIndexOrZero for                       
                    hpicfSnmpResponseSourceAddrIfIndex and                       
                    hpicfSnmpTrapSourceAddrIfIndex objects."
        REVISION "200609010000Z"      -- September 01, 2006 at 00:00 GMT
        DESCRIPTION 
            "Initial revision"
        REVISION "200708240000Z"      -- August 24, 2007 at 00:00 GMT
        DESCRIPTION 
            "Added hpicfSnmpNotification information."
        ::= { hpSwitch 38 }

    


--
-- Node definitions
--

    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.0
    hpicfSnmpNotification OBJECT IDENTIFIER ::= { hpicfSnmpMIB 0 }

    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.0.1
    hpicfSnmpAuthFail NOTIFICATION-TYPE
        OBJECTS { hpicfSnmpAuthFailCount, hpicfSnmpAuthFailIPType, hpicfSnmpAuthFailIP }
             
        STATUS current
        DESCRIPTION 
            "The switch sends this notification when an SNMP 
            SET command fails at the authorization check stage.
            This notification applies to SETs within the hpicf tree that 
            are network security related.  This object is controlled
            by hpicfSnmpAuthNotifyEnable"

        ::= { hpicfSnmpNotification 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1
    hpicfSnmpObjects OBJECT IDENTIFIER ::= { hpicfSnmpMIB 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1
    hpicfSnmpConfig OBJECT IDENTIFIER ::= { hpicfSnmpObjects 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1
    hpicfSnmpGlobalCfg OBJECT IDENTIFIER ::= { hpicfSnmpConfig 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1
    hpicfSnmpResponseSourceAddrPolicyTable OBJECT-TYPE
        SYNTAX SEQUENCE OF HpicfSnmpResponseSourceAddrPolicyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table of entries used to configure the policy for
            selecting source address while sending SNMP response. 
            When this entry is configured, the source address field 
            in the IP PKT header get modified based on the configured
            option. There are 4 valid options that can be configured 
            for ipv4 and ipv6 networks
            a) rfc1517 
               This is the default behavior if no other policy is
               configured. In this case the source address will be 
               the address of the interface from which packet goes 
               out of the box. 
            b) user configured ip address
               In this case the configured address will be used as 
               source address in the SNMP response.
            c) user configured interface
               In this case the IP address configured on the specified
               interface will be used as source address in the SNMP 
               response. In case of multinet interface then smallest
               IP address present on the interface in lexicographical 
               order will be used as source address while sending
               SNMP responses for requests.
            d) dst_ip_of_request
               In this case, the destination ip address present in 
               the IP header of received SNMP request will be used 
               as source address in the SNMP response."
        ::= { hpicfSnmpGlobalCfg 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1
    hpicfSnmpResponseSourceAddrPolicyEntry OBJECT-TYPE
        SYNTAX HpicfSnmpResponseSourceAddrPolicyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the table, containing information about
            a single source address. This table alows only 2 values 
            that can be used as index to this table. These are:
            1) hpicfSnmpResponseSourceAddressType = ipv4
              Where user wants to configure the source address type 
              used while sending the SNMP response on IPV4 network.
            2) hpicfSnmpResponseSourceAddressType = ipv6
             Where user wants to configure the source address type 
             used while sending the SNMP response on IPV6 network."
        INDEX { hpicfSnmpResponseSourceAddressType }
        ::= { hpicfSnmpResponseSourceAddrPolicyTable 1 }

    
    HpicfSnmpResponseSourceAddrPolicyEntry ::=
        SEQUENCE { 
            hpicfSnmpResponseSourceAddressType
                InetAddressType,
            hpicfSnmpResponseSourceAddrPolicy
                INTEGER,
            hpicfSnmpResponseSourceAddress
                InetAddress,
            hpicfSnmpResponseSourceAddrIfIndex
                InterfaceIndexOrZero
         }

    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.1
    hpicfSnmpResponseSourceAddressType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "We allow only 2 values for this object as an index for 
            hpicfSnmpResponseSourceAddrPolicyEntry -
            1) hpicfSnmpResponseSourceAddressType = ipv4
              Where user wants to configure the source address type 
              used while sending the SNMP response on IPV4 network
            2) hpicfSnmpResponseSourceAddressType = ipv6
              Where user wants to configure the source address type 
              used while sending the SNMP response on IPV6 network."
        ::= { hpicfSnmpResponseSourceAddrPolicyEntry 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.2
    hpicfSnmpResponseSourceAddrPolicy OBJECT-TYPE
        SYNTAX INTEGER
            {
            rfc1517(1),
            configuredIP(2),
            configuredInterface(3),
            dstIpOfRequest(4)
            }
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            " This specifies the policy for selecting the source 
            address for outgoing SNMP responses.
            a) rfc1517 
             This is the default behavior if no other policy is
             configured. In this case the source address will be 
             the address of the interface from which packet goes 
             out of the box. 
            b) configuredIP
             By setting this value will enable the SNMP agent to use
             IP addresses specified in hpicfSnmpResponseSourceAddress
             object as source address while sending the response.
             hpicfSnmpResponseSourceAddress must be set to a valid
             and active ip address before setting policy to
             configuredIP.
            c) configuredInterface
             By setting this value will enable the SNMP agent to use
             IP addresses configured on the interface specified by 
             hpicfSnmpResponseSourceAddrIfIndex object as source
             address while sending the response.
             In case of multinet interface then smallest IP 
             address present on the interface in lexicographical 
             order will be used as source address while sending
             SNMP responses for requests.
             hpicfSnmpResponseSourceAddrIfIndex object must be set
             to a valid loopback interface number before setting
             policy to configuredInterface.
            d) dst_ip_of_request
             In this case, the destination ip address present in 
             the IP header of received SNMP request will be used as 
             source address in the SNMP response."
        DEFVAL { 1 }
        ::= { hpicfSnmpResponseSourceAddrPolicyEntry 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.3
    hpicfSnmpResponseSourceAddress OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object is used to set the IP address which will be 
            used as source ip while sending the SNMP response.
            This object should be used in conjunction with the 
            hpicfSnmpResponseSourceAddressType and 
            hpicfSnmpResponseSourceAddrPolicy."
        ::= { hpicfSnmpResponseSourceAddrPolicyEntry 3 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.4
    hpicfSnmpResponseSourceAddrIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndexOrZero
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object is used to set the interface whose IP address
            will be used as source IP while sending the SNMP response.
            This object should be used in conjunction with the 
            hpicfSnmpResponseSourceAddressType and 
            hpicfSnmpResponseSourceAddrPolicy."
        ::= { hpicfSnmpResponseSourceAddrPolicyEntry 4 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2
    hpicfSnmpTrapSourceAddrTable OBJECT-TYPE
        SYNTAX SEQUENCE OF HpicfSnmpTrapSourceAddrEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table of entries used to configure the source address 
            used while generating SNMP Traps. When this entry is 
            configured, the source address field in the IP PKT header 
            get modified based on the configured option."
        ::= { hpicfSnmpGlobalCfg 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1
    hpicfSnmpTrapSourceAddrEntry OBJECT-TYPE
        SYNTAX HpicfSnmpTrapSourceAddrEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry in the table, containing information about
            a single source address. This table alows only 2 values 
            that can be used as index to this table. These are:
            1) hpicfSnmpResponseSourceAddressType = ipv4
              Where user wants to configure the source address 
              used while sending the SNMP TRAPs on IPV4 network.
            2) hpicfSnmpResponseSourceAddressType = ipv6
              Where user wants to configure the source address 
              used while sending the SNMP TRAPs on IPV6 network."
        INDEX { hpicfSnmpTrapSourceAddressType }
        ::= { hpicfSnmpTrapSourceAddrTable 1 }

    
    HpicfSnmpTrapSourceAddrEntry ::=
        SEQUENCE { 
            hpicfSnmpTrapSourceAddressType
                InetAddressType,
            hpicfSnmpTrapSourceAddrPolicy
                INTEGER,
            hpicfSnmpTrapSourceAddress
                InetAddress,
            hpicfSnmpTrapSourceAddrIfIndex
                InterfaceIndexOrZero
         }

    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.1
    hpicfSnmpTrapSourceAddressType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            " This table alows only 2 values 
            that can be used as index to this table. These are:
            1) hpicfSnmpResponseSourceAddressType = ipv4
             Where user wants to configure the source address 
             used while sending the SNMP TRAPs on IPV4 network.
            2) hpicfSnmpResponseSourceAddressType = ipv6
             Where user wants to configure the source address 
             used while sending the SNMP TRAPs on IPV6 network."
        ::= { hpicfSnmpTrapSourceAddrEntry 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.2
    hpicfSnmpTrapSourceAddrPolicy OBJECT-TYPE
        SYNTAX INTEGER
            {
            rfc1517(1),
            configuredIP(2),
            configuredInterface(3),
            dstIpOfRequest(4)
            }
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            " This specifies the policy for selecting the source 
            address for outgoing SNMP responses.
            a) rfc1517 
             This is the default behavior if no other policy is
             configured. In this case the source address will be 
             the address of the interface from which packet goes 
             out of the box. 
            b) configuredIP
             By setting this value will enable the SNMP agent to use
             IP addresses specified in hpicfSnmpResponseSourceAddress
             object as source address while sending the response.
             hpicfSnmpTrapSourceAddress must be set to a valid
             and active ip address before setting policy to
             configuredIP.
            c) configuredInterface
             By setting this value will enable the SNMP agent to use
             IP addresses configured on the interface specified by 
             hpicfSnmpResponseSourceAddrIfIndex object as source
             address while sending the response.
             In case of multinet interface then smallest IP 
             address present on the interface in lexicographical 
             order will be used as source address while sending
             SNMP responses for requests.
             hpicfSnmpTrapSourceAddrIfIndex object must be set
             to a valid loopback interface number before setting
             policy to configuredInterface."
        ::= { hpicfSnmpTrapSourceAddrEntry 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.3
    hpicfSnmpTrapSourceAddress OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object is used to set the IP address which will be 
            used as source ip while sending the SNMP TRAPs.
            This object should be used in conjunction with the 
            hpicfSnmpResponseSourceAddressType and 
            hpicfSnmpTrapSourceAddrPolicy."
        ::= { hpicfSnmpTrapSourceAddrEntry 3 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.4
    hpicfSnmpTrapSourceAddrIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndexOrZero
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object is used to set the interface whose IP address
            will be used as source ip while sending the SNMP TRAPs.
            This object should be used in conjunction with the 
            hpicfSnmpResponseSourceAddressType and
            hpicfSnmpTrapSourceAddrPolicy."
        ::= { hpicfSnmpTrapSourceAddrEntry 4 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3
    hpicfSnmpAuthNotifyEnable OBJECT-TYPE
        SYNTAX INTEGER
            {
            enabled(1),
            disabled(2)
            }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Controls whether hpicfSnmpAuthFail notifications will be generated.
            The default value is ‘1’ (Enabled).  A value of ‘2’ represents 
            Disabled.  Writing this object requires authentication, such 
            as provided by SNMPv3.
            
            NOTE that hpicfSnmpAuthFail and snmpEnableAuthenTraps (RFC-1157)
            are mutually exclusive.  While they may both be disabled, only
            one may be enabled at any given time.  Notifications enabled by
            hpicfSnmpAuthFail are more comprehensive and are therefore
            recommended."
        ::= { hpicfSnmpGlobalCfg 3 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2
    hpicfSnmpNotificationObjects OBJECT IDENTIFIER ::= { hpicfSnmpObjects 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.1
    hpicfSnmpAuthFailCount OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "A count of SNMP authorization failures detected by the SNMP entity."
        ::= { hpicfSnmpNotificationObjects 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.2
    hpicfSnmpAuthFailIPType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "Type of IP address contained in hpicfSnmpAuthFailIP."
        ::= { hpicfSnmpNotificationObjects 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.3
    hpicfSnmpAuthFailIP OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "IP address of sender of message that failed authentication."
        ::= { hpicfSnmpNotificationObjects 3 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2
    hpicfSnmpConformance OBJECT IDENTIFIER ::= { hpicfSnmpMIB 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1
    hpicfSnmpCompliances OBJECT IDENTIFIER ::= { hpicfSnmpConformance 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1.1
    hpicfSnmpCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION 
            "A compliance statement for HP Routing switches with SNMP"
        MODULE -- this module
            MANDATORY-GROUPS { hpicfSnmpResponseSourceAddrTableCompliancesGroup, 
                hpicfSnmpTrapSourceAddrTableCompliancesGroup }
            GROUP hpicfSnmpResponseSourceAddrTableGroup
                DESCRIPTION 
                    "A Collection of Object(s) that allow  
                    configuration of policies for selecting source address for 
                    SNMP response."
            GROUP hpicfSnmpTrapSourceAddrTableGroup
                DESCRIPTION 
                    "A Collection of Object(s) that allow  
                    configuration of Trap source Addresses"
        ::= { hpicfSnmpCompliances 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2
    hpicfSnmpCompliancesGroups OBJECT IDENTIFIER ::= { hpicfSnmpConformance 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.1
    hpicfSnmpResponseSourceAddrTableCompliancesGroup OBJECT-GROUP
        OBJECTS { hpicfSnmpResponseSourceAddressType, 
            hpicfSnmpResponseSourceAddrPolicy, 
            hpicfSnmpResponseSourceAddress, 
            hpicfSnmpResponseSourceAddrIfIndex }
        STATUS current
        DESCRIPTION 
            "A collection of objects allowing configuration of policies
            in the switch for selecting the source address used while 
            generating SNMP response"
        ::= { hpicfSnmpCompliancesGroups 1 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.2
    hpicfSnmpTrapSourceAddrTableCompliancesGroup OBJECT-GROUP
        OBJECTS { hpicfSnmpTrapSourceAddressType, 
            hpicfSnmpTrapSourceAddrPolicy, 
            hpicfSnmpTrapSourceAddress, 
            hpicfSnmpTrapSourceAddrIfIndex }
        STATUS current
        DESCRIPTION 
            "A collection of objects allowing configuration of source
            addresses for SNMP traps geneated by the switch."
        ::= { hpicfSnmpCompliancesGroups 2 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.3
    hpicfSnmpResponseSourceAddrTableGroup OBJECT-GROUP
        OBJECTS { hpicfSnmpResponseSourceAddressType, 
            hpicfSnmpResponseSourceAddrPolicy, 
            hpicfSnmpResponseSourceAddress, 
            hpicfSnmpResponseSourceAddrIfIndex }
        STATUS current
        DESCRIPTION 
            "Description."
        ::= { hpicfSnmpCompliancesGroups 3 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.4
    hpicfSnmpTrapSourceAddrTableGroup OBJECT-GROUP
        OBJECTS { hpicfSnmpResponseSourceAddressType, 
            hpicfSnmpResponseSourceAddrPolicy, 
            hpicfSnmpResponseSourceAddress, 
            hpicfSnmpResponseSourceAddrIfIndex }
        STATUS current
        DESCRIPTION 
            "Description."
        ::= { hpicfSnmpCompliancesGroups 4 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.5
    hpicfSnmpNotifyObjectGroup OBJECT-GROUP
        OBJECTS { hpicfSnmpAuthFailCount, 
        hpicfSnmpAuthFailIPType, hpicfSnmpAuthFailIP, 
            hpicfSnmpAuthNotifyEnable }
        STATUS current
        DESCRIPTION 
            "The operational status of hpicfSwitchAuthServerFail notifications.
            The default value is ‘1’ (Enabled).  A value of ‘2’ represents 
            Disabled.  Writing this object requires authentication, such 
            as provided by SNMPv3."
        ::= { hpicfSnmpCompliancesGroups 5 }

    
    -- 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.6
    hpicfSnmpNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS { hpicfSnmpAuthFail }
        STATUS current
        DESCRIPTION 
            "Description."
        ::= { hpicfSnmpCompliancesGroups 6 }


END