path: root/MIBS/fs/NSCRTV-EPON-SYSTEM-MIB

NSCRTV-EPON-SYSTEM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, TimeTicks
        FROM SNMPv2-SMI
    DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    EponDeviceIndex, EponCardIndex, EponPortIndex, EponAlarmCode, EponAlarmInstance, EponSeverityType,
    AutoNegotiationTechAbility, TAddress, EponStats15MinRecordType, EponStats24HourRecordType, EponStatsThresholdType
		FROM NSCRTV-EPONEOC-EPON-MIB
    systemObjects
        FROM NSCRTV-EPONEOC-EPON-MIB;

--------------------------------------------------------------------------------
--  systemObjects [系统属性参数管理项](1.3.6.1.4.1.17409.2.3.1)
--------------------------------------------------------------------------------       
    systemGlobalObjects OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        "全局参数表"
      ::= { systemObjects 1 }
                            
    systemTime OBJECT-TYPE
      SYNTAX DateAndTime
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        节点系统时间        
        建议采用8字节定义，不包括时区"
      ::= { systemGlobalObjects 1 }
    
    inbandIpAddress OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带内管理接口IP地址"
      ::= { systemGlobalObjects 2 }
    
    inbandIpSubnetMask OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带内管理接口IP掩码"
      ::= { systemGlobalObjects 3 }
    
    inbandIpGateway OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带内管理接口网关IP地址"
      ::= { systemGlobalObjects 4 }
    
    inbandVlanId OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带内管理接口VLAN ID.
        
        带内管理VLAN的成员关系由VLAN表定义"
      ::= { systemGlobalObjects 5 }
    
    inbandMacAddress OBJECT-TYPE
      SYNTAX MacAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        带内管理接口MAC地址."
      ::= { systemGlobalObjects 6 }
    
    outbandIpAddress OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带外管理接口IP地址"
      ::= { systemGlobalObjects 7 }
    
    outbandIpSubnetMask OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带外管理接口IP掩码"
      ::= { systemGlobalObjects 8 }
    
    outbandIpGateway OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        带外管理接口网关IP地址"
      ::= { systemGlobalObjects 9 }
    
    outbandMacAddress OBJECT-TYPE
      SYNTAX MacAddress
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        带外管理接口MAC地址"
      ::= { systemGlobalObjects 10 }
    
    systemOUI OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (3))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        系统OUI"
      ::= { systemGlobalObjects 11 }

    vendorName OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        Vender name of the OLT equipment"
      ::= { systemGlobalObjects 12 }   
      
    Save OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        save olt running-config"
      ::= { systemGlobalObjects 13 } 
      
    Clear OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        clear olt running-config"
      ::= { systemGlobalObjects 14 }
    
    oltObjects OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        "
        OLT管理项节点"
      ::= { systemObjects 2 }
    
    oltPropertyTable OBJECT-TYPE
      SYNTAX SEQUENCE OF OltPropertyEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        OLT属性表"
      ::= { oltObjects 1 }
    
    oltPropertyEntry OBJECT-TYPE
      SYNTAX OltPropertyEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        " "
      INDEX { oltDeviceIndex }
      ::= { oltPropertyTable 1 }
    
    OltPropertyEntry ::=
      SEQUENCE { 
        oltDeviceIndex
          INTEGER,
        oltName
          DisplayString,
        oltType
          DisplayString,
        oltAdminStatus
          INTEGER,
        oltDeviceUpTime
          TimeStamp,
        oltDeviceNumOfTotalServiceSlot
          INTEGER,
        oltDeviceNumOfTotalPowerSlot
          INTEGER,
        oltDeviceNumOfTotalFanSlot
          INTEGER,
        oltDeviceStyle
          INTEGER
                    
       }

    oltDeviceIndex  OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        OLT设备索引号。
        
        一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识"
      ::= { oltPropertyEntry 1 }
    
    oltName OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该OLT设备的名称"
      ::= { oltPropertyEntry 2 }
    
    oltType OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        OLT设备类型"
      ::= { oltPropertyEntry 3 }
    
    oltAdminStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        up(1),
        down(2),
        testing(3)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        OLT设备管理状态        
        up(1)      - 设备允许提供业务
        down(2)    - 设备禁止提供业务
        testing(3) - 设备处于测试状态，该状态下可能无法正常提供业务"
      ::= { oltPropertyEntry 4 }
    
    oltDeviceUpTime OBJECT-TYPE
      SYNTAX TimeStamp
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        该OLT设备启动时长"
      ::= { oltPropertyEntry 5 }

    oltDeviceNumOfTotalServiceSlot OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        Total number of service slots in the OLT device, including
        service card, switch card, control card, uplink card, etc. 
        but except power, FAN, regardless whether the slot is installed
        module"
      ::= { oltPropertyEntry 6 }

    oltDeviceNumOfTotalPowerSlot OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        Total number of power slots in the OLT device, regardless whether 
        the slot is installed module"
      ::= { oltPropertyEntry 7 }
       
    oltDeviceNumOfTotalFanSlot OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        Total number of FAN slots in the OLT device, regardless whether 
        the slot is installed module"
      ::= { oltPropertyEntry 8 }

    oltDeviceStyle OBJECT-TYPE
      SYNTAX INTEGER
        {
          fixed(1),
          chassisBased(2),
          other(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        The device stype of either fixed or chassis based：        
        fixed(1) - such as pizza box
        chassisBased(2) - Have number of slots for installing service card, power card, etc.        
        "
      ::= { oltPropertyEntry 9 }
    
    boardObjects OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        "
        板卡管理项"
      ::= { systemObjects 3 }
    
    boardTable OBJECT-TYPE
      SYNTAX SEQUENCE OF BoardEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        This table shall include rows for all slots, including the slots has
        a presence state of 'NotInstalled'.
        "
      ::= { boardObjects 1 }
    
    boardEntry OBJECT-TYPE
      SYNTAX BoardEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        " "
      INDEX { bDeviceIndex, bCardIndex}
      ::= { boardTable 1 }
    
    BoardEntry ::=
      SEQUENCE { 
        bDeviceIndex
          INTEGER,
        bCardIndex
          EponCardIndex,
        bType
          INTEGER,
        bAttribute
          INTEGER,
        bOperationStatus
          INTEGER,
        bAdminStatus
          INTEGER,
        bHardwareVersion
          DisplayString,
        bFirmwareVersion
          DisplayString,
        bSoftwareVersion
          DisplayString,
        bUpTime
          TimeStamp,
        bAlarmStatus
          BITS,
        bSerialNumber
          DisplayString,
        bAction
          INTEGER,
        bName
          OCTET STRING,
        bPresenceStatus 
          INTEGER
       }

    bDeviceIndex  OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        ""
      ::= { boardEntry 1 }

    bCardIndex  OBJECT-TYPE
      SYNTAX EponCardIndex
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        板卡索引号"
      ::= { boardEntry 2 }
    
    bType OBJECT-TYPE
      SYNTAX INTEGER
        {
        controlBoard(1),
        geponBoard(2),
        uplinkBoard(3),
        switchBoard(4),
        other(5),
        vacant(6),
        controlUplinkBoard(7),
        ponUplinkBoard(8)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        "
      ::= { boardEntry 3 }
    
    bAttribute OBJECT-TYPE
      SYNTAX INTEGER
        {
        active(1),
        standby(2),
        standalone(3),
        notApplicable(4)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        ""
      ::= { boardEntry 4 }
    
    bOperationStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        up(1),
        down(2),
        testing(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡操作状态
        
        up(1)      - 该板卡可以提供业务
        down(2)    - 该板卡无法提供业务
        testing(3) - 该板卡处于测试状态，该状态下可能无法正常提供业务"
      ::= { boardEntry 5 }
    
    bAdminStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        up(1),
        down(2),
        testing(3)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        板卡管理状态        
        up(1)      - 该板卡允许提供业务
        down(2)    - 该板卡禁止提供业务
        testing(3) - 该板卡处于测试状态，该状态下可能无法正常提供业务"
      ::= { boardEntry 6 }
    
    bHardwareVersion OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡硬件版本"
      ::= { boardEntry 7 }
    
    bFirmwareVersion OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡固件版本"
      ::= { boardEntry 8 }
    
    bSoftwareVersion OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡软件版本"
      ::= { boardEntry 9 }
    
    bUpTime OBJECT-TYPE
      SYNTAX TimeStamp
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡在线时间"
      ::= { boardEntry 10 }
    
    bAlarmStatus OBJECT-TYPE
      SYNTAX BITS
        {
        critical(0),
        major(1),
        minor(2),
        warning(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡告警状态"
      ::= { boardEntry 11 }
    
    bSerialNumber OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        板卡SN"
      ::= { boardEntry 12 }
    
    bAction OBJECT-TYPE
      SYNTAX INTEGER
        {
        noAction(1),
        switchover(2),
        upgrade(3)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        对板卡施加的操作        
        noAction(1)    - 表示没有任何操作，用于默认设置和其他操作完成后恢复值
        switchover(2)  - 主备切换，只针对主控卡和交换卡
        upgrade(3)     - 板卡软件升级"
      ::= { boardEntry 13 }
    bName OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (1..32))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        The board name defined by vendor individual"
      ::= { boardEntry 14 }
    
    bPresenceStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        installed(1),
        notInstalled(2),
        others(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The physical presence status of the slot"
      ::= { boardEntry 15 }
    
    powerObjects OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        "
        电源表模块列表"
      ::= { systemObjects 4 }
    
    powerPropertyTable OBJECT-TYPE
      SYNTAX SEQUENCE OF PowerPropertyEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        电源板属性表"
      ::= { powerObjects 1 }
    
    powerPropertyEntry OBJECT-TYPE
      SYNTAX PowerPropertyEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        " "
      INDEX { powerDeviceIndex, powerCardIndex}
      ::= { powerPropertyTable 1 }
    
    PowerPropertyEntry ::=
      SEQUENCE { 
        powerDeviceIndex
          INTEGER,
        powerCardIndex
          EponCardIndex,
        powerCardOperationStatus
          INTEGER,
        powerCardAlarmStatus
          BITS,
        powerCardAction
          INTEGER,
        powerCardName
          OCTET STRING,
        powerCardPresenceStatus
          INTEGER,
        powerCardRedundancyStatus
          INTEGER
       }

    powerDeviceIndex  OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        OLT设备索引号。        
        一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识"
      ::= { powerPropertyEntry 1 }

    powerCardIndex  OBJECT-TYPE
      SYNTAX EponCardIndex
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        板卡索引号"
      ::= { powerPropertyEntry 2 }

    powerCardOperationStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        up(1),
        down(2),
        testing(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        电源板操作状态        
        up(1)      - 该板卡可以提供业务
        down(2)    - 该板卡无法提供业务
        testing(3) - 该板卡处于测试状态，该状态下可能无法正常提供业务"
      ::= { powerPropertyEntry 3 }
    
    powerCardAlarmStatus OBJECT-TYPE
      SYNTAX BITS
        {
        critical(0),
        major(1),
        minor(2),
        warning(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        电源板告警状态"
      ::= { powerPropertyEntry 4 }
    
    powerCardAction OBJECT-TYPE
      SYNTAX INTEGER
        {
        noAction(1),
        switchover(2)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        对电源板施加的操作        
        noAction(1)    - 表示没有任何操作，用于默认设置和其他操作完成后恢复值
        switchover(2)  - 主备切换，如果电源工作在主备模式
        
        Note:
        
        Switchover(2) shall be only set to the power board with powerCardRedundancyStatus
        of active(1)"
      ::= { powerPropertyEntry 5 }

    powerCardName OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (1..32))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        The power card name defined by vendor individual"
      ::= { powerPropertyEntry 6 }
   
    powerCardPresenceStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        installed(1),
        notInstalled(2),
        others(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The physical presence status of the power slot"
      ::= { powerPropertyEntry 7 }

    powerCardRedundancyStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        active(1),
        stanby(2),
        standalone(3),
        loadShareing(4)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The redundancy status of the power card：        
        active(1)   -   The power card is working on redundanct active/
                    Standby mode and the current role is active.
        stanby(2)   - The power card is working on redundanct active/
                    Standby mode and the current role is standby.
        standalone(3) -   The power card is not working on redundanct mode 
                  and the current role is standalone.
        loadShareing(4) -   The power card is working on redundanct loadsharing
                  mode.
        "
      ::= { powerPropertyEntry 8 }
    
    fanObjects OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        "
        风扇表"
      ::= { systemObjects 5 }
    
    fanPropertyTable OBJECT-TYPE
      SYNTAX SEQUENCE OF FanPropertyEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        风扇属性表"
      ::= { fanObjects 1 }
    
    fanPropertyEntry OBJECT-TYPE
      SYNTAX FanPropertyEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        " "
      INDEX { fanDeviceIndex, fanCardIndex}
      ::= { fanPropertyTable 1 }
    
    FanPropertyEntry ::=
      SEQUENCE { 
        fanDeviceIndex
          INTEGER,
        fanCardIndex
          EponCardIndex,
        fanCardOperationStatus
          INTEGER,
        fanCardAlarmStatus
          BITS,
        fanCardName
          OCTET STRING,
        fanCardPresenceStatus
          INTEGER
       }

    fanDeviceIndex  OBJECT-TYPE
      SYNTAX INTEGER
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        OLT设备索引号。        
        一个OLT节点可以由多台OLT设备组成。节点内的每台OLT设备由OLT设备索引号唯一标识"
      ::= { fanPropertyEntry 1 }

    fanCardIndex  OBJECT-TYPE
      SYNTAX EponCardIndex
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        板卡索引号"
      ::= { fanPropertyEntry 2 }

    fanCardOperationStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        up(1),
        down(2),
        testing(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        风扇板操作状态        
        up(1)      - 该板卡可以提供业务
        down(2)    - 该板卡无法提供业务
        testing(3) - 该板卡处于测试状态，该状态下可能无法正常提供业务"
      ::= { fanPropertyEntry 3 }
    
    fanCardAlarmStatus OBJECT-TYPE
      SYNTAX BITS
        {
        critical(0),
        major(1),
        minor(2),
        warning(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        风扇板告警状态"
      ::= { fanPropertyEntry 4 }

    fanCardName OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (1..32))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        The FAN card name defined by vendor individual"
      ::= { fanPropertyEntry 5 }
    
    fanCardPresenceStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        installed(1),
        notInstalled(2),
        others(3)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The physical presence status of the FAN card slot"
      ::= { fanPropertyEntry 6 }
  
    fileTransferManagement OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        "
        文件传输节点"
      ::= { systemObjects 6 }
    
    fileTransferTable OBJECT-TYPE
      SYNTAX SEQUENCE OF FileTransferEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        文件传输进程表"
      ::= { fileTransferManagement 1 }
    
    fileTransferEntry OBJECT-TYPE
      SYNTAX FileTransferEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        " "
      INDEX { fileTransferIndex }
      ::= { fileTransferTable 1 }
    
    FileTransferEntry ::=
      SEQUENCE { 
        fileTransferIndex
          INTEGER,
        fileTransferProtocolType
          INTEGER,
        serverIpAddress
          IpAddress,
        ftpUserName
          DisplayString,
        ftpUserPassword
          DisplayString,
        transferFileSrcNamePath
          DisplayString,
        transferFileDstNamePath
          DisplayString,
        transferAction
          INTEGER,
        transferStatus
          INTEGER
       }

    fileTransferIndex OBJECT-TYPE
      SYNTAX INTEGER (1..10)
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        文件传送进程流水号"
      ::= { fileTransferEntry 1 }
    
    fileTransferProtocolType OBJECT-TYPE
      SYNTAX INTEGER
        {
        ftp(1),
        tftp(2)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程使用的文件传输协议类型"
      ::= { fileTransferEntry 2 }
    
    serverIpAddress OBJECT-TYPE
      SYNTAX IpAddress
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程使用的服务器IP地址"
      ::= { fileTransferEntry 3 }
    
    ftpUserName OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程使用的用户名，仅适用于FTP协议"
      ::= { fileTransferEntry 4 }
    
    ftpUserPassword OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程使用的密码，仅适用于FTP协议"
      ::= { fileTransferEntry 5 }
    
    transferFileSrcNamePath OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程对应的文件源名称路径，比如‘/tftproot/file/image.bin"
      ::= { fileTransferEntry 6 }
    
    transferFileDstNamePath OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程对应的文件目的名称路径，比如‘/tftproot/file/image.bin"
      ::= { fileTransferEntry 7 }
    
    transferAction OBJECT-TYPE
      SYNTAX INTEGER
        {
        noOperation(1),
        put(2), 
        get(3),
        halt(4)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        该进程对应的文件传输动作        
        noOperation(1) - 表示没有任何传输操作，用于默认设置和其他操作完成后恢复值
        put(2)       - 上传文件
        get(3)         - 下载文件
        halt(4)        - 停止文件传送"
      ::= { fileTransferEntry 8 }
    
    transferStatus OBJECT-TYPE
      SYNTAX INTEGER
        {
        idle(1),
        inProgress(2),
        success(3),
        failure(4)
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        该进程对应的文件传输状态        
        idle(1)       - 空闲
        inProgress(2) - 正在传送中
        success(3)    - 传送成功
        failure(4)    - 传送失败"
      ::= { fileTransferEntry 9 }

    
    fileInfoManagementTable OBJECT-TYPE
      SYNTAX SEQUENCE OF FileInfoManagementEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        OLT文件信息管理表        
        It is done by file list per directionary.        
        Please walk filePath for the file lists in the specified
        path. If leave it NULL or walk fileInfoManagementEntry,
        the file list of the root directionary shall be returned        
        "
      ::= { fileTransferManagement 2 }
    
    fileInfoManagementEntry OBJECT-TYPE
      SYNTAX FileInfoManagementEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        " "
      INDEX { filePath, fileName }
      ::= { fileInfoManagementTable 1 }
    
    FileInfoManagementEntry ::=
      SEQUENCE { 
        filePath
          DisplayString,
        fileName
          DisplayString,
        fileSize
          Counter32,
        fileModifyTime
          DateAndTime,
        fileManagementAction
          INTEGER,
        fileAttribute
          INTEGER
       }
              
    filePath OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        File path        
        It shall be started with a length octet, followed with path string. The length octet
        shall indicate the number of character octets, excluding length itself.        
        For example, 0x05 41 42 43 44 45, respresents ABCDE        
        It shall be ended with '/', which is used to distinguish the two DisplayString
        indexes. For example, if the path is flash/root, filePath shall be set to flash/root/. 
        "
      ::= { fileInfoManagementEntry 1 }
    fileName OBJECT-TYPE
      SYNTAX DisplayString
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "
        File name. MUST not include '/' character and MUST not be NULL.        
        It shall be started with a length octet, followed with name string. The length octet
        shall indicate the number of character octets, excluding length itself.        
        For example, 0x05 41 42 43 44 45, respresents ABCDE
        "
      ::= { fileInfoManagementEntry 2 }
         
    fileSize OBJECT-TYPE
      SYNTAX Counter32
      UNITS "bytes"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        文件大小，以字节为单位"
      ::= { fileInfoManagementEntry 3 }
    
    fileModifyTime OBJECT-TYPE
      SYNTAX DateAndTime
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        文件修改时间"
      ::= { fileInfoManagementEntry 4 }
    
    fileManagementAction OBJECT-TYPE
      SYNTAX INTEGER
        {
        noOperation(1),
        erase(2)
        }
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "
        对文件施加的动作        
        noOperation(1) - 表示没有任何传输操作，用于默认设置和其他操作完成后恢复值
        erase(2)       - 文件删除"
      ::= { fileInfoManagementEntry 5 }

    fileAttribute OBJECT-TYPE
      SYNTAX INTEGER
        {
        file(1),        -- It is a file
        dir(2)          -- It is a directionary
        }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "
        The attribute of the file"
      ::= { fileInfoManagementEntry 6 }    
      
    onuUpgradeManagement OBJECT-IDENTITY
      STATUS current
      DESCRIPTION 
        ""
      ::= { systemObjects 7 }     
      
    onuBatchUpgradeObjects OBJECT IDENTIFIER ::= { onuUpgradeManagement 1 }   
    
    onuBatchUpgradeOnuList  OBJECT-TYPE
      SYNTAX    OCTET STRING (SIZE(0..1024))
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "Onu列表，每4byte表示一个onu（参照EponDeviceIndex），长度为4 * （onu个数），最大长度是4*256"
      ::= { onuBatchUpgradeObjects 1 }

    onuBatchUpgradeAction  OBJECT-TYPE
      SYNTAX   INTEGER
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "写入任意值触发升级"
      ::= { onuBatchUpgradeObjects 2 }   

    onuBatchUpgradeStatus  OBJECT-TYPE
      SYNTAX   OCTET STRING (SIZE(0..512))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Onu列表，每2byte表示一个onu的升级状态，长度为2 * （onu个数），同当前升级任务的onulist一一对应
		状态码说明：
			1：Idle
			2：Waiting
			3：InProgress
			4：Success
			5：Failure（不确定原因的错误）
			6：OnuTypeNotConsistent（Onu类型不一致）
			7：FileDownloadFail（下载镜像失败，包括OLT内部板卡间传输失败或者文件前置校验失败）
			8：OnuNotExist（Onu掉线或者别的导致Onuid失效的情况）
			9：NotConsistent（Onu同升级文件不匹配）
			10：OnuCommunicationFail（Onu通信失败）
		"
      ::= { onuBatchUpgradeObjects 3 } 
          
--
-- END of NSCRTV-EPON-SYSTEM-MIB
--

END