path: root/MIBS/fs/GBNPlatformGNLink-MIB

------------------------------------------------------------------------------
------------------------------------------------------------------------------
--
--  File              : gbnPlatformGNLink-MIB.mi2
--  Description   : Sample gbn GGMP configuration MIB
--  Version        : 1.0
--  Date            : Dec 12, 2002
--  Author         : ouyangchunbo
--  Copyright (C) New admin Co., Ltd. All Rights Reserved.
--
------------------------------------------------------------------------------

    GBNPlatformGNLink-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDEntry, OBJECT-TYPE,
        Integer32, IpAddress,
        Counter32, Counter64,
        Unsigned32,
        NOTIFICATION-TYPE                       FROM SNMPv2-SMI

        DisplayString                           FROM RFC1213-MIB
        PortList                                FROM Q-BRIDGE-MIB
        MacAddress,
        RowStatus, TruthValue                   FROM SNMPv2-TC

        MODULE-COMPLIANCE, OBJECT-GROUP         FROM SNMPv2-CONF

        gbnPlatform                             FROM ADMIN-MASTER-MIB
        ;


        gnlinkMib MODULE-IDENTITY
        LAST-UPDATED    "0406030000Z"  -- June 3, 2004
        ORGANIZATION    "New admin Co., Ltd."
        CONTACT-INFO    "New admin Co., Ltd.
                         E-mail: support@admin.com"

        DESCRIPTION     "ADMIN ZY.Link Enterprise MIB definition."

        REVISION        "0406030000Z"  -- June 3, 2004
        DESCRIPTION     "Initial MIB creation."

        ::= { gbnPlatform 2 }


------------------------------------------------------------------------------
--  Textual Conventions (i.e., these do not affect object encoding):
------------------------------------------------------------------------------
    --
    --  "DURABLE":
    --    Objects that are saved across a system reset and/or power cycle
    --    are noted as "DURABLE" for convenience in the DESCRIPTION
    --    section of the object definition.  Code must be explicitly
    --    written to implement these DURABLE objects.
    --

------------------------------------------------------------------------------
--  define groups in GBN-GGMP-MIB
------------------------------------------------------------------------------
gbnGgmpSvrProperty            OBJECT IDENTIFIER ::= { gnlinkMib 7 }

gbnGgmpClientProperty         OBJECT IDENTIFIER ::= { gnlinkMib 14 }

gbnGgmpTrap                   OBJECT IDENTIFIER ::= { gnlinkMib 9 }
-------------------------------------------------------------------
--Add GGMPMIB      2002/12/12     ouyangchunbo
-------------------------------------------------------------------

        ggmpStatus OBJECT-TYPE
        SYNTAX INTEGER {
             enable(1),
             disablepacketdiscard(2),
             disablepacketforwardnolocation(4)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "ggmp status"
        ::= { gnlinkMib 1 }

        ggmpRole OBJECT-TYPE
        SYNTAX INTEGER {
             client(1),
             server(2),
             null(255)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "ggmp lanswitch role"
        ::= { gnlinkMib 2 }

        ----------------------------------------------------------------------------------
        --LANSWITCH属性数据MIB表--
        ----------------------------------------------------------------------------------
        gbnGgmpLsProTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GbnGgmpLsProEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table of Lanswitch property table"
        ::= { gnlinkMib 3 }

        gbnGgmpLsProEntry OBJECT-TYPE
        SYNTAX GbnGgmpLsProEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of Lanswitch property parameters."
        INDEX { ggmplanMAC }
        ::= { gbnGgmpLsProTable 1 }

        GbnGgmpLsProEntry ::= SEQUENCE {
            ggmplanMAC             MacAddress,
            ggmplanswitchName      DisplayString (SIZE(1..255)),
            ggmplanDeviceId        Integer32,
            ggmplanInServerPort    Integer32,
            ggmplanPortNumber      Integer32,
            ggmplanStatus          Integer32,
            ggmplanupportsep       Integer32,
            ggmppvidrangestart     Integer32,
            ggmplanlocation        Integer32,
            ggmplanBSF             Integer32,
            ggmpclientver          Integer32,
            ggmplanManageVlanId    Integer32,
            ggmplanGrnStp          Integer32,
            ggmplanHostVer         DisplayString (SIZE(1..25)),
            ggmplanOnlineTime      Integer32,
            ggmplanVlanMode        Integer32,
            ggmplanMacLearningMode Integer32,
            ggmplanHardwareVersion Integer32,
            ggmplanBootVer         DisplayString (SIZE(1..25)),
            ggmplanDeviceName      DisplayString (SIZE(1..32))

        }

        ggmplanMAC OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " MAC address of the regist lanswtich"
        ::= { gbnGgmpLsProEntry 1 }

        ggmplanswitchName OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..255))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " name of the registered lanswtich ."
        ::= { gbnGgmpLsProEntry 2 }


        ggmplanDeviceId OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Device ID of the regist lanswtich , the highest byte of device id means device type , 2 means TiNet s2008,
             3 means TiNet s2016, 4 means TiNet s3024."
        ::= { gbnGgmpLsProEntry 3 }

        ggmplanInServerPort OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "The port which the lanswith regist in server "
        ::= { gbnGgmpLsProEntry 4 }

        ggmplanPortNumber OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "The ports number of regist lanswitch "
        ::= { gbnGgmpLsProEntry 5 }

        ggmplanStatus OBJECT-TYPE
        SYNTAX Integer32
        {
            lsError(0),
            lsNormal(1),
            lsRegister(2),
            lsNull(255)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "The status of regist lanswitch "
        ::= { gbnGgmpLsProEntry 6 }

        ggmplanupportsep OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "The status of regist lanswitch.
             If lanswitch is in error status, the return value will be -1."
        ::= { gbnGgmpLsProEntry 7 }

        ggmppvidrangestart OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " The start of pvid range of TiNet S2016E/S2024E.
             If lanswitch is in error status, the return value will be -1. "
        ::= { gbnGgmpLsProEntry 8 }

        ggmplanlocation OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " The location of the lanswitch "
        ::= { gbnGgmpLsProEntry 9 }

        ggmplanBSF OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " Broadcast storm filter value of the lanswitch.
             If lanswitch is in error status, the return value will be -1. "
        ::= { gbnGgmpLsProEntry 10 }

        ggmpclientver OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " ggmp client software version "
        ::= { gbnGgmpLsProEntry 11 }

        ggmplanManageVlanId OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " ggmp client Manage Vlan "
        ::= { gbnGgmpLsProEntry 12 }

        ggmplanGrnStp OBJECT-TYPE
        SYNTAX Integer32
        {
            grnStpEnable(1),
            grnStpDisable(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " ggmp client STP switch.
             If lanswitch is in error status, the return value will be -1. "
        ::= { gbnGgmpLsProEntry 13 }

        ggmplanHostVer OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..25))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " Host Software Version of the Lanswitch"
        ::= { gbnGgmpLsProEntry 14 }

        ggmplanOnlineTime OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " Client Lanswitch Online Time. Unit is second. "
        ::= { gbnGgmpLsProEntry 15 }

        ggmplanVlanMode OBJECT-TYPE
        SYNTAX Integer32
        {
            vlanModePortBased(1),
            vlanMode802dot1q(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " ggmp client vlan mode.
             port-based vlan means ingress does not check packets' vlan header,
             802.1q means ingress checks packets' vlan header. "
             --vlan模式分为基于端口的vlan和802.1qvlan，基于端口的vlan表示入端口不检查报文
             --的vlan首部，802.1qvlan表示入端口检查报文的vlan首部
        ::= { gbnGgmpLsProEntry 16 }

        ggmplanMacLearningMode OBJECT-TYPE
        SYNTAX Integer32
        {
            macLearningModeIvl(0),
            macLearningModeSvl(1)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " ggmp client mac-learning mode.
             ivl means independent vlan learning,svl means share vlan learning."
             --ivl代表独立vlan学习，svl代表共享vlan学习
        ::= { gbnGgmpLsProEntry 17 }

        ggmplanHardwareVersion OBJECT-TYPE
        SYNTAX Integer32
        {
            CDVersion(0),
            CGVersion(1)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " client's hardware version,0 means CD version and 1 means CG version."
             --客户端的硬件版本，0代表CD版本，1代表CG坂本
        ::= { gbnGgmpLsProEntry 18 }

        ggmplanBootVer OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..25))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " BootRom Version of the Lanswitch"
        ::= { gbnGgmpLsProEntry 19 }

        ggmplanDeviceName OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..32)) 
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Device name of the registered lanswtich ."
        ::= { gbnGgmpLsProEntry 20 }

        ----------------------------------------------------------------------------------
        --LANSWITCH端口属性数据MIB表--
        ----------------------------------------------------------------------------------
        gbnGgmpPortPropertyTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GbnGgmpPortPropertyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table of Lanswitch port property table"
        ::= { gnlinkMib 4 }

        gbnGgmpPortPropertyEntry OBJECT-TYPE
        SYNTAX GbnGgmpPortPropertyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of Lanswitch port property parameters."
        INDEX { ggmpportmac, ggmpportportnumber }
        ::= { gbnGgmpPortPropertyTable 1 }

        GbnGgmpPortPropertyEntry ::= SEQUENCE {
            ggmpportmac              MacAddress,
            ggmpportportnumber       Integer32,
            ggmpportportclosed       Integer32,
            ggmpportportlink         Integer32,
            ggmpportportvlanid       Integer32,
            ggmpportporttagged       Integer32,
            ggmpportportduplex       Integer32,
            ggmpportportactualduplex Integer32,
            ggmpportportlockmac      Integer32,
            ggmpportportgrnstp       Integer32
        }

        ggmpportmac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " mac address of the regist lanswtich ."
        ::= { gbnGgmpPortPropertyEntry 1 }

        ggmpportportnumber OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " port number of lanswitch "
        ::= { gbnGgmpPortPropertyEntry 2 }

        ggmpportportclosed OBJECT-TYPE
        SYNTAX Integer32
        {
            interfaceEnable(1),
            interfaceDisable(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " port state of closed or open ."
        ::= { gbnGgmpPortPropertyEntry 3 }

        ggmpportportlink OBJECT-TYPE
        SYNTAX Integer32
        {
            portlinkup(1),
            portlinkdown(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " the port link status  "
        ::= { gbnGgmpPortPropertyEntry 4 }

        ggmpportportvlanid OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " The ports default vlan id "
        ::= { gbnGgmpPortPropertyEntry 5 }

        ggmpportporttagged OBJECT-TYPE
        SYNTAX Integer32
        {
            porttrunk(1),
            portaccess(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " The ports tagged or untagged status "
        ::= { gbnGgmpPortPropertyEntry 6 }

        ggmpportportduplex OBJECT-TYPE
        SYNTAX Integer32
        {
            auto(1),
            half10(2),
            full10(3),
            half100(4),
            full100(5),
            half1000(6),
            full1000(7)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " The ports duplex "
        ::= { gbnGgmpPortPropertyEntry 7 }

        ggmpportportactualduplex OBJECT-TYPE
        SYNTAX Integer32
        {
            unknown(1),
            half10(2),
            full10(3),
            half100(4),
            full100(5),
            half1000(6),
            full1000(7)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " The ports actual duplex "
        ::= { gbnGgmpPortPropertyEntry 8 }

        ggmpportportlockmac OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " The ports locked mac-address number "
        ::= { gbnGgmpPortPropertyEntry 9 }

        ggmpportportgrnstp OBJECT-TYPE
        SYNTAX Integer32
        {
            stpdisable(0),
            stpblocking(1),
            stplearning(2),
            stpforwarding(3),
            stpunknown(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " The ports grn stp status "
        ::= { gbnGgmpPortPropertyEntry 10 }

        gbnGgmpVlanPropertyTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GbnGgmpVlanPropertyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table of Lanswitch vlan property table"
        ::= { gnlinkMib 5 }

        gbnGgmpVlanPropertyEntry OBJECT-TYPE
        SYNTAX GbnGgmpVlanPropertyEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of Lanswitch Vlan property parameters."
        INDEX { ggmpvlanmac, ggmpvlanvlanid }
        ::= { gbnGgmpVlanPropertyTable 1 }

        GbnGgmpVlanPropertyEntry ::= SEQUENCE {
            ggmpvlanmac                MacAddress,
            ggmpvlanvlanid             Integer32,
            ggmpvlanname               DisplayString (SIZE(1..32)),
            ggmpvlanstatic             Integer32,
            ggmpvlanmembermap          PortList,
            ggmpvlanuntaggedmap        PortList,
            ggmpvlanaddportmap         PortList,
            ggmpvlandelportmap         PortList,
            ggmpvlanrowstatus          RowStatus,
            ggmpvlanaddtagportmap     PortList,
            ggmpvlanadduntagportmap   PortList
        }

        ggmpvlanmac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " mac address of the regist lanswtich ."
        ::= { gbnGgmpVlanPropertyEntry 1 }

        ggmpvlanvlanid OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " the id of vlan "
        ::= { gbnGgmpVlanPropertyEntry 2 }

        ggmpvlanname OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..32))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " An administratively assigned string, which may be used
              to identify the VLAN., but TiNet s2008 should not config vlan name"
        ::= { gbnGgmpVlanPropertyEntry 3 }

        ggmpvlanstatic OBJECT-TYPE
        SYNTAX Integer32
        {
           other(1),
           permanent(2),
           dynamicgvrp(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " This object indicates the status of this entry.
              other(1) - this entry is currently in use but the
                conditions under which it will remain so differ
                from the following values.
              permanent(2) - this entry, corresponding to an entry
                in dot1qVlanStaticTable, is currently in use and
                will remain so after the next reset of the
                device.  The port lists for this entry include
                ports from the equivalent dot1qVlanStaticTable
                entry and ports learnt dynamically.
              dynamicGvrp(3) - this entry is currently in use
                and will remain so until removed by GVRP.  There
                is no static entry for this VLAN and it will be
                removed when the last port leaves the VLAN. "
        ::= { gbnGgmpVlanPropertyEntry 4 }

        ggmpvlanmembermap OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        " The set of ports which are transmitting traffic for
          this VLAN as either tagged or untagged frames. "
        ::= { gbnGgmpVlanPropertyEntry 5 }

        ggmpvlanuntaggedmap OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " The set of ports which are transmitting traffic for
               this VLAN as untagged frames."
        ::= { gbnGgmpVlanPropertyEntry 6 }

        ggmpvlanaddportmap OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " The set of ports which are transmitting traffic for
               this VLAN as adding ports."
        ::= { gbnGgmpVlanPropertyEntry 7 }

        ggmpvlandelportmap OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " The set of ports which are transmitting traffic for
               this VLAN as adding ports."
        ::= { gbnGgmpVlanPropertyEntry 8 }

        ggmpvlanrowstatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " This object indicates the status of this entry."
        ::= { gbnGgmpVlanPropertyEntry 9 }

        ggmpvlanaddtagportmap OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " Modify member port of this vlan type to tagged. "
        ::= { gbnGgmpVlanPropertyEntry 10 }

        ggmpvlanadduntagportmap OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " Modify member port of this vlan type to untagged. "
        ::= { gbnGgmpVlanPropertyEntry 11 }

        gbnGgmpLsSaveTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GbnGgmpLsSaveEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table that save lanswitch"
        ::= { gnlinkMib 6 }

        gbnGgmpLsSaveEntry OBJECT-TYPE
        SYNTAX GbnGgmpLsSaveEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table that save lanswitch"
        INDEX { ggmpsaveMAC }
        ::= { gbnGgmpLsSaveTable 1 }

        GbnGgmpLsSaveEntry ::= SEQUENCE {
            ggmpsaveMAC             MacAddress,
            ggmpsaveStatus          Integer32,
            ggmprebootStatus        Integer32,
            ggmpresetStatus         Integer32,
            ggmpSyncLswProperty     Integer32,
            ggmpSyncPortTable       Integer32,
            ggmpSyncVlanTable       Integer32,
            ggmpAllPortTag          PortList,
            ggmpAllPortUntag        PortList
        }

        ggmpsaveMAC OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " MAC address of the regist lanswtich"
        ::= { gbnGgmpLsSaveEntry 1 }

        ggmpsaveStatus OBJECT-TYPE
        SYNTAX Integer32
        {
            noop(1),
            savelanswitch(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " if ggmpsaveStatus is 2, then save the lanswitch whose macaddress is MacAddress."
        ::= { gbnGgmpLsSaveEntry 2 }

        ggmprebootStatus OBJECT-TYPE
        SYNTAX Integer32
        {
            noop(1),
            rebootlanswitch(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " if ggmprebootStatus is 2, then reboot the lanswitch whose macaddress is MacAddress."
        ::= { gbnGgmpLsSaveEntry 3 }

        ggmpresetStatus OBJECT-TYPE
        SYNTAX Integer32
        {
            noop(1),
            resetlanswitch(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " if ggmpresetStatus is 2, then reset the lanswitch whose macaddress is MacAddress to default setting."
        ::= { gbnGgmpLsSaveEntry 4 }

        ggmpSyncLswProperty OBJECT-TYPE
        SYNTAX Integer32
        {
            noop(1),
            synchronizelswproperty(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Synchronize Lanswitch Property "
        ::= { gbnGgmpLsSaveEntry 5 }

        ggmpSyncPortTable OBJECT-TYPE
        SYNTAX Integer32
        {
            noop(1),
            synchronizeporttable(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Synchronize Lanswitch Port Table "
        ::= { gbnGgmpLsSaveEntry 6 }

        ggmpSyncVlanTable OBJECT-TYPE
        SYNTAX Integer32
        {
            noop(1),
            synchronizevlantable(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Synchronize Lanswitch Vlan Table "
        ::= { gbnGgmpLsSaveEntry 7 }

        ggmpAllPortTag OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " Set all port tag property. tagged[bit=1],do not change[bit=0]"
        ::= { gbnGgmpLsSaveEntry 8 }

        ggmpAllPortUntag OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " Set all port untag property. untagged[bit=1],do not change[bit=0]"
        ::= { gbnGgmpLsSaveEntry 9 }


        ggmpRefusedPort OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Refused PortList of Server .enable[bit=1],disable[bit=0]."
        ::= { gbnGgmpSvrProperty 1 }

        ggmpServerMngVlan OBJECT-TYPE
        SYNTAX Integer32 (2..4094)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Gnlink vlan in server."
        ::= { gbnGgmpSvrProperty 2 }

        ggmpSvrLanMngVlan OBJECT-TYPE
        SYNTAX Integer32 (2..4094)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Gnlink vlan in server for all clients. Command node."
        ::= { gbnGgmpSvrProperty 3 }

        ggmpTrapSwitch OBJECT-TYPE
        SYNTAX Integer32
        {
            ggmpTrapEnable(1),
            ggmpTrapDisable(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " ggmp trap sending switch "
        ::= { gbnGgmpSvrProperty 4 }

        ggmpSvrRequestTimeout OBJECT-TYPE
        SYNTAX Integer32 (1..10)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Maximum time that command waiting for its reply "
            --命令的超时时间
        ::= { gbnGgmpSvrProperty 5 }

        ggmpSvrClientErrTimeout OBJECT-TYPE
        SYNTAX Integer32 (90..255)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " Time that server must wait to delete a lanswith in error state "
            --server删除处于错误状态的client前需要等待的时间
        ::= { gbnGgmpSvrProperty 6 }

        ggmpSvrClientErrMaxHellos OBJECT-TYPE
        SYNTAX Integer32 (3..10)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " Times which lanswitch hasn't shankhands with server before being setted to error "
            --设置server在握手超时多少次后将client置为error
        ::= { gbnGgmpSvrProperty 7 }

        ggmpSvrRequestMaxRetries OBJECT-TYPE
        SYNTAX Integer32 (3..10)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " Retransmit times for server before sending a command successfully "
            --命令发送失败允许的重试次数
        ::= { gbnGgmpSvrProperty 8 }

        ggmpserverMacAddr OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " ZY.Link protocol packets' destination MAC address"
            --ZY.Link协议报文的目的MAC地址
        ::= { gbnGgmpSvrProperty 9 }

        ggmpClientAppGetMode OBJECT-TYPE
        SYNTAX INTEGER {
               ftp(1),
               tftp(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " config mode by which to get application from server,ftp or tftp"
            --选择通过哪种方式由服务器下载客户端应用程序,分为ftp模式和tftp模式
        ::= { gbnGgmpSvrProperty 10 }

        ggmpClientAppSvrIpAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " ggmp client application ftp server ipaddress"
            --集群管理客户端应用程序ftp服务器的ip地址
        ::= { gbnGgmpSvrProperty 11 }

        ggmpClientAppFtpSvrUserName OBJECT-TYPE
        SYNTAX DisplayString(SIZE(1..32))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "ggmp client application ftp server userName"
            --集群管理客户端ftp服务器用户名
        ::= { gbnGgmpSvrProperty 12 }

        ggmpClientAppFtpSvrPassword OBJECT-TYPE
        SYNTAX DisplayString(SIZE(1..32))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "ggmp client application ftp server password"
            --集群管理客户端ftp服务器密码
        ::= { gbnGgmpSvrProperty 13 }

        ggmpClientRemoteReboot OBJECT-TYPE
        SYNTAX INTEGER {
               permit(1),
               deny(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " config ZY.Link server allow client remote reboot"
            --配置ZY.Link服务器端是否允许支持触发重启的客户端设备在远程升级完毕后触发重启
        ::= { gbnGgmpSvrProperty 14 }

        ----------------------------------------------------------------------------------
        --LANSWITCH ARL表查询MIB表--
        ----------------------------------------------------------------------------------
        gbnGgmpLsARLTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GbnGgmpLsARLEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table that is used to search lanswitch ARL table"
        ::= { gnlinkMib 8 }

        gbnGgmpLsARLEntry OBJECT-TYPE
        SYNTAX GbnGgmpLsARLEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table that is used to search lanswitch ARL table"
        INDEX { ggmparllanMAC, ggmparllanarlMAC }
        ::= { gbnGgmpLsARLTable 1 }


        GbnGgmpLsARLEntry ::= SEQUENCE {
            ggmparllanMAC          MacAddress,
            ggmparllanarlMAC       MacAddress,
            ggmpmac2port            Integer32
        }

        ggmparllanMAC OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            " MAC address of the registered lanswtich"
        ::= { gbnGgmpLsARLEntry 1 }

        ggmparllanarlMAC OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            " MAC address of the registered lanswtich"
        ::= { gbnGgmpLsARLEntry 2 }

        ggmpmac2port OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            " Port id corresponding to the mac address in the last 6 bytes of the index."
        ::= { gbnGgmpLsARLEntry 3 }

        ----------------------------------------------------------------------------------
        --GGMP TRAP MIB--
        ----------------------------------------------------------------------------------

        ggmpClientPortLoop NOTIFICATION-TYPE
        OBJECTS { ggmpportportgrnstp }
        STATUS  current
        DESCRIPTION
               "Client port loop"
        ::= { gbnGgmpTrap 1 }

        ggmpClientPortLoopFree NOTIFICATION-TYPE
        OBJECTS { ggmpportportgrnstp }
        STATUS  current
        DESCRIPTION
               "Client port loop free"
        ::= { gbnGgmpTrap 2 }

        ggmpClientPortLinkUp NOTIFICATION-TYPE
        OBJECTS { ggmpportportlink }
        STATUS  current
        DESCRIPTION
               "Client port link up"
        ::= { gbnGgmpTrap 3 }

        ggmpClientPortLinkDown NOTIFICATION-TYPE
        OBJECTS { ggmpportportlink }
        STATUS  current
        DESCRIPTION
               "Client port link down"
        ::= { gbnGgmpTrap 4 }

        ggmpClientTurnErr NOTIFICATION-TYPE
        OBJECTS { ggmplanMAC }
        STATUS  current
        DESCRIPTION
               "Client turn to error status"
        ::= { gbnGgmpTrap 5 }

        ggmpClientTurnNormal NOTIFICATION-TYPE
        OBJECTS { ggmplanMAC }
        STATUS  current
        DESCRIPTION
               "Client turn to normal status from error status"
        ::= { gbnGgmpTrap 6 }

        ggmpClientDeleteErr NOTIFICATION-TYPE
        OBJECTS { ggmplanMAC }
        STATUS  current
        DESCRIPTION
               "Delete error status lanswitch information"
        ::= { gbnGgmpTrap 7 }

        ggmpClientNewReg NOTIFICATION-TYPE
        OBJECTS { ggmplanMAC }
        STATUS  current
        DESCRIPTION
               "New register lanswitch"
        ::= { gbnGgmpTrap 8 }
        
        -----------------------------------------------------------------------
        --GGMP 远程升级客户端应用程序名的配置 MIB--
        -----------------------------------------------------------------------
        ggmpDevClientAppTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GgmpDevClientAppEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table used to config Lanswitch application table"
            --该表用来配置下挂交换机的应用程序
        ::= { gnlinkMib 10 }

        ggmpDevClientAppEntry OBJECT-TYPE
        SYNTAX GgmpDevClientAppEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "Table entry for configging clients' application list."
               --用于配置客户端的应用程序列表
        INDEX {
           ggmpDevTypeNum ,
           ggmpRmtLoadAppType
        }
        ::= { ggmpDevClientAppTable 1 }

        GgmpDevClientAppEntry ::= SEQUENCE {
            ggmpDevTypeNum         INTEGER,
            ggmpRmtLoadAppType      INTEGER,
            ggmpDevAppName             DisplayString(SIZE(1..64))
        }

        ggmpDevTypeNum OBJECT-TYPE
        SYNTAX INTEGER (1..24)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "This value actually is the same as the index of device id table,
                please refer to device id table for more details about which
                value each device corresponds to"
               --此节点的值和device id表的索引值相同,可以参考device id表来查看每种
               --设备对应的索引值
        ::= { ggmpDevClientAppEntry 1 }

        ggmpRmtLoadAppType OBJECT-TYPE
        SYNTAX INTEGER {
               bootrom(1),
               host(2)
        }
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
             "config file type to be loaded :bootrom or host"
             --配置待加载的文件类型，bootrom文件或主机文件
        ::= { ggmpDevClientAppEntry 2 }

        ggmpDevAppName OBJECT-TYPE
        SYNTAX DisplayString(SIZE(1..64))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
               "ggmp client application filename"
               --集群管理客户端应用程序名
        ::= { ggmpDevClientAppEntry 3 }

        ----------------------------------------------------------------------
        --GGMP 远程升级客户端以及加载时间的配置mib--
        ----------------------------------------------------------------------
        ggmpDevRmtLoadTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GgmpDevRmtLoadEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table of Lanswitch application table"
        ::= { gnlinkMib 11 }

        ggmpDevRmtLoadEntry OBJECT-TYPE
        SYNTAX GgmpDevRmtLoadEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "Table entry for configging/showing clients remote load information."
               --用于配置显示客户端的加载信息
        INDEX { ggmpRmtLoadDevMac }
        ::= { ggmpDevRmtLoadTable 1 }

        GgmpDevRmtLoadEntry ::= SEQUENCE {
            ggmpRmtLoadDevMac          MacAddress,
            ggmpRmtLoadQueIn           INTEGER,
            ggmplanRmtLoadPercent      INTEGER,
            ggmplanRmtLoadTime         INTEGER,
            ggmplanRmtLoadAppType      INTEGER,
            ggmplanRmtLoadRowStatus    RowStatus
        }

        ggmpRmtLoadDevMac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            " MAC address of the regist lanswtich"
            --集群管理客户端的设备MAC地址
        ::= { ggmpDevRmtLoadEntry 1 }

        ggmpRmtLoadQueIn OBJECT-TYPE
        SYNTAX INTEGER {
              WaitingList(1),
              ReadyList(2),
              CmpltList(3),
              FailedList(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " current queue in which lanswitch resides"
             --指示设备处于哪个队列
        ::= { ggmpDevRmtLoadEntry 2 }

        ggmplanRmtLoadPercent OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             " Show the process of loading"
             --显示加载的进度
        ::= { ggmpDevRmtLoadEntry 3 }

        ggmplanRmtLoadAppType OBJECT-TYPE
        SYNTAX INTEGER{
               bootrom(1),
               host(2),
               bootromAndHost(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "config file type to be loaded :bootrom or host or both"
             --配置待加载的文件类型，bootrom文件或主机文件或者全部文件
        ::= { ggmpDevRmtLoadEntry 4 }

        ggmplanRmtLoadTime OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " Time at which lanswitch to be loaded"
             --下挂交换机的加载时间
        ::= { ggmpDevRmtLoadEntry 5 }

        ggmplanRmtLoadRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
             "Status of this entry."
            --表项的状态
        ::= { ggmpDevRmtLoadEntry 6 }

        -----------------------------------------------------------------------
        --GGMP 远程升级模式的配置 MIB--
        -----------------------------------------------------------------------
        ggmpRmtLoadModeTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GgmpRmtLoadModeEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table of Lanswitch application table"
        ::= { gnlinkMib 12 }

        ggmpRmtLoadModeEntry OBJECT-TYPE
        SYNTAX GgmpRmtLoadModeEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "Table entry for configging/showing remote load mode."
               --用于配置显示客户端的加载模式
        INDEX { ggmpRmtLoadDevType }
        ::= { ggmpRmtLoadModeTable 1 }

        GgmpRmtLoadModeEntry ::= SEQUENCE {
            ggmpRmtLoadDevType      INTEGER,
            ggmpRmtLoadmode         INTEGER,
            ggmpRmtLoadModeTime     INTEGER,
            ggmpRmtLoadNewRegAuto   INTEGER,
            ggmpRmtLoadModeRowStatus   RowStatus
        }

        ggmpRmtLoadDevType OBJECT-TYPE
        SYNTAX INTEGER (0..24)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
             "value '0'means all device,the others actually are the same as the
              index of device id table,please refer to device id table for more
              details about which value each device corresponds to"
             --此节点值为'0'代表配置所有设备,其他值的意义和device id表的索引值相同,
             --可以参考device id表来查看每种设备对应的索引值
        ::= { ggmpRmtLoadModeEntry 1 }

        ggmpRmtLoadmode OBJECT-TYPE
        SYNTAX INTEGER {
            hostOnce(1),
            bootromOnce(2),
            hostAndBootromOnce(3),
            hostPeriodic(4),
            bootromPeriodic(5),
            hostAndBootromPeriodic(6),
            loadNone(7)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " Config loading mode:1.load all lanswitchs'host file ,or bootrom
               file, or both ,at specified time; 2.load all lanswitchs'host file,
               or bootrom file ,or both, periodically at specified time"
             --配置加载的模式,分为：
             --1.在给定时间一次性升级所有设备的主机文件或bootrom文件或所有文件;
             --2.在给定时间周期性加载所有设备的主机文件或bootrom文件或所有文件。
        ::= { ggmpRmtLoadModeEntry 2 }

        ggmpRmtLoadModeTime OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " Config when to load lanswitch.loading time is total number
               of seconds relative to start point which is '1970/01/01 00:00:00'
               if remote-load-mode is 'loadAllOnce',or 'sunday 00:00:00'if
               remote-load-time is 'loadAllPeriodic' "
             --配置加载的时间,当加载模式为"loadAllOnce"时，加载时间为相对于
             --1970/01/01 00:00:00的总秒数，当加载模式为'loadAllPeriodic'时，
             --加载时间为相对于星期天00:00:00的总秒数
        ::= { ggmpRmtLoadModeEntry 3 }

        ggmpRmtLoadNewRegAuto OBJECT-TYPE
        SYNTAX   INTEGER {
                 hostFile(1),
                 bootromFile(2),
                 hostAndBootrom(3),
                 none(4)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Config if all lanswitchs newly registered are loaded automatically.
             File to be loaded :host file, bootrom file, or both"
            --配置是否自动加载所有新注册设备,待升级的文件分为主机文件，bootrom文件
            --或者是两种文件都升级
        ::= { ggmpRmtLoadModeEntry 4 }

        ggmpRmtLoadModeRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "Status of this entry."
            --表项的状态
        ::= { ggmpRmtLoadModeEntry 5 }
        ----------------------------------------------------------------------
        --此表用来配置客户端的设备id列表--
        ----------------------------------------------------------------------
        ggmpGbnDeviceIdTable OBJECT-TYPE
        SYNTAX SEQUENCE OF GgmpGbnDeviceIdEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A Table of Lanswitch id Entry"
        ::= { gnlinkMib 13 }

        ggmpGbnDeviceIdEntry  OBJECT-TYPE
        SYNTAX GgmpGbnDeviceIdEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
               "Table entry for configging lanswitch deviceId information."
               --用于配置客户端的设备id信息
        INDEX { ggmpGbnDevIdIndex }
        ::= { ggmpGbnDeviceIdTable 1 }

        GgmpGbnDeviceIdEntry ::= SEQUENCE {
            ggmpGbnDevIdIndex INTEGER,
            ggmpGbnDeviceId   INTEGER,
            ggmpGbnDeviceDesc DisplayString(SIZE(1..32)),
            ggmpGbnDeviceIDRowStatus   RowStatus,
           ggmpGbnDevLowMidHighType INTEGER
        }

        ggmpGbnDevIdIndex OBJECT-TYPE
        SYNTAX INTEGER(1..48)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
             " index of deviceId table,the first 20 entries of id table
               have been occupied,so index should not less than 21"
             --设备id表的索引,由于前20条表项已经被占用，所以用户配置
             --输入的索引不应小于21
        ::= { ggmpGbnDeviceIdEntry 1 }

        ggmpGbnDeviceId  OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " lanswitch's device-id which is the identifier of device-type,
               first 20 entries of device-id table have been occupied by
               existing device-types,following details ：
               S3042V->0x01000000,S2008E->0x02000000,S2016E->0x03000000,
               S2016EF->0x03010000,S2024E->0x04000000,S2024EF->0x04010000,
               S2208->0x05000000,S2024M->0x06010000,S2024M->0x06010000,
               S2024M->0x06010000,S2024M->0x06010000,S2016M->0x07010000,
               S2008M->0x08010000,S2024EI->0x09010000,S2016EI->0x0a010000,
               S2008EI->0x0b010000,S2008EI-S->0x13010000,S2008EI-SF->0x14010000,
               S2024C->0x0c010000,S2016C->0x0d010000,S2008C->0x0e010000,
               S2008C-F->0x0f010000,S2008B->0x11010000,these entries are protected
               by software.unknown device-type-number needs configging manually"
        ::= { ggmpGbnDeviceIdEntry 2 }

        ggmpGbnDeviceDesc OBJECT-TYPE
        SYNTAX DisplayString(SIZE(1..32))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " lanswitch's device-type name，such as ‘TiNet S2008E’"
        ::= { ggmpGbnDeviceIdEntry 3 }

        ggmpGbnDeviceIDRowStatus   OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "Status of this entry."
        ::= { ggmpGbnDeviceIdEntry 4 }

        ggmpGbnDevLowMidHighType  OBJECT-TYPE
        SYNTAX INTEGER {
             lowswitch(1),
             mid-highswitch(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             " define whether device is low switch or mid-high switch"
        ::= { ggmpGbnDeviceIdEntry 5 }


        ggmpClientmac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            " ZY.Link protocol packets' destination MAC address"
        ::= { gbnGgmpClientProperty 1 }

        ggmpClientManageVlan OBJECT-TYPE
        SYNTAX Integer32 (2..4094)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Gnlink vlan for client."
        ::= { gbnGgmpClientProperty 2 }
--
-- END of GBN-GGMP-MIB
--

END