path: root/MIBS/fs/GARP-MIB

GARP-MIB DEFINITIONS ::= BEGIN

-- -------------------------------------------------------------
-- Internal GARP MIB
-- -------------------------------------------------------------

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Counter32, Unsigned32, TimeTicks
        FROM SNMPv2-SMI
    TimeInterval, RowStatus, TruthValue, DisplayString, 
	TEXTUAL-CONVENTION, MacAddress
        FROM SNMPv2-TC
    gbnL2
        FROM ADMIN-MASTER-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF;

garpMib MODULE-IDENTITY
    LAST-UPDATED "9907060000Z"
    ORGANIZATION "admin Systems, Inc."
    CONTACT-INFO
        "admin Systems"
    DESCRIPTION
        "GARP Module Management"

-- revision history

    REVISION     "9907060000Z"
    DESCRIPTION
         "Initial version"

    ::= { gbnL2 2 }

garpMIBObjects OBJECT IDENTIFIER ::= { garpMib 1 }

-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

EnabledStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A simple status value for the object."
    SYNTAX      INTEGER {
	enabled(1), disabled(2) }

TimeFilter ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
        "To be used for the index to a table.  Allows an application
        to download only those rows changed since a particular time.
        A row is considered changed if the value of any object in the
        row changes or if the row is created or deleted.

        When sysUpTime is equal to zero, this table shall be empty.

        One entry exists for each past value of sysUpTime, except that
        the whole table is purged should sysUpTime wrap.

        As this basic row is updated new conceptual rows are created
        (which still share the now updated object values with all
        other instances).  The number of instances which are created
        is determined by the value of sysUpTime at which the basic row
        was last updated.  One instance will exist for each value of
        sysUpTime at the last update time for the row.  A new
        timeMark instance is created for each new sysUpTime value.
        Each new conceptual row will be associated with the timeMark
        instance which was created at the value of sysUpTime with
        which the conceptual row is to be associated.

        By definition all conceptual rows were updated at or after
        time zero and so at least one conceptual row (associated with
        timeMark.0) must exist for each underlying (basic) row.

        See the appendix for further discussion of this variable.

        Consider the following fooTable:

        fooTable ...
        INDEX { fooTimeMark, fooIndex }

        FooEntry {
           fooTimeMark  TimeFilter
           fooIndex     INTEGER,
           fooCounts    Counter
        }

        Should there be two basic rows in this table (fooIndex == 1,
        fooIndex == 2) and row 1 was updated most recently at time 6,
        while row 2 was updated most recently at time 8, and both rows
        had been updated on several earlier occasions such that the
        current values were 5 and 9 respectively then the following
        fooCounts instances would exist.

        fooCounts.0.1  5
        fooCounts.0.2  9
        fooCounts.1.1  5
        fooCounts.1.2  9
        fooCounts.2.1  5
        fooCounts.2.2  9
        fooCounts.3.1  5
        fooCounts.3.2  9
        fooCounts.4.1  5
        fooCounts.4.2  9
        fooCounts.5.1  5
        fooCounts.5.2  9
        fooCounts.6.1  5
        fooCounts.6.2  9
        fooCounts.7.2  9    -- note that row 1 doesn't exist for
        fooCounts.8.2  9    -- times 7 and 8"
    SYNTAX    TimeTicks

PortList ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Each octet within this value specifies a set of eight
        ports, with the first octet specifying ports 1 through
        8, the second octet specifying ports 9 through 16, etc.
        Within each octet, the most significant bit represents
        the lowest numbered port, and the least significant bit
        represents the highest numbered port.  Thus, each port
        of the bridge is represented by a single bit within the
        value of this object.  If that bit has a value of '1'
        then that port is included in the set of ports; the port
        is not included if its bit has a value of '0'."
    SYNTAX      OCTET STRING

VlanIndex ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value used to index per-VLAN tables: values of 0 and
        4095 are not permitted; if the value is between 1 and
        4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
        global scope within a given bridged domain (see VlanId
        textual convention).  If the value is greater than 4095
        then it represents a VLAN with scope local to the
        particular agent, i.e. one without a global VLAN-ID
        assigned to it. Such VLANs are outside the scope of
        IEEE 802.1Q but it is convenient to be able to manage them
        in the same way using this MIB."
    SYNTAX      Unsigned32

VlanId ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A 12-bit VLAN ID used in the VLAN Tag header."
    SYNTAX      INTEGER (1..4094)

-- -------------------------------------------------------------
-- groups in the GARP MIB
-- -------------------------------------------------------------

gDot1qBase       OBJECT IDENTIFIER ::= { garpMIBObjects 1 }
gDot1qTp         OBJECT IDENTIFIER ::= { garpMIBObjects 2 }
gDot1qStatic     OBJECT IDENTIFIER ::= { garpMIBObjects 3 }
gDot1qVlan       OBJECT IDENTIFIER ::= { garpMIBObjects 4 }
gDot1dGarp		 OBJECT IDENTIFIER ::= { garpMIBObjects 5 }
gDot1dGmrp		 OBJECT IDENTIFIER ::= { garpMIBObjects 6 }
gDot1dExtBase    OBJECT IDENTIFIER ::= { garpMIBObjects 7 }
gDot1qExtend     OBJECT IDENTIFIER ::= { garpMIBObjects 8 }

-- -------------------------------------------------------------

-- -------------------------------------------------------------
-- gDot1qBase group
-- -------------------------------------------------------------

gDot1qVlanVersionNumber OBJECT-TYPE
    SYNTAX      INTEGER {
                    version1(1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The version number of IEEE 802.1Q that this device
        supports."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.1.1"
    DEFVAL      { 1 }
    ::= { gDot1qBase 1 }

gDot1qMaxVlanId OBJECT-TYPE
    SYNTAX      VlanId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum IEEE 802.1Q VLAN ID that this device
        supports."
    REFERENCE
        "IEEE 802.1Q/D11 Section 9.3.2.3"
    ::= { gDot1qBase 2 }

gDot1qMaxSupportedVlans OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of IEEE 802.1Q VLANs that this
        device supports."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.1.1"
    ::= { gDot1qBase 3 }

gDot1qNumVlans OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current number of IEEE 802.1Q VLANs that are
        configured in this device."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.1.1"
    ::= { gDot1qBase 4 }

gDot1qGvrpStatus OBJECT-TYPE
    SYNTAX      EnabledStatus{ enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { enabled }
		The administrative status requested by management for
        GVRP.  The value enabled(1) indicates that GVRP should
        be enabled on this device, on all ports for which it has
        not been specifically disabled.  When disabled(2), GVRP
        is disabled on all ports and all GVRP packets will be
        forwarded transparently.  This object affects all GVRP
        Applicant and Registrar state machines.  A transition
        from disabled(2) to enabled(1) will cause a reset of all
        GVRP state machines on all ports."
    DEFVAL      { disabled }
    ::= { gDot1qBase 5 }

gDot1qVlanIndexMappingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanIndexMappingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table gives the mapping of linear indices to 
         VLAN Indices.  It is necessary because CCDGEN doesn't
         support nonlinear indices."
    REFERENCE
        "No reference"
    ::= { gDot1qBase 6 }

gDot1qVlanIndexMappingEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanIndexMappingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry maps a linear index to a VLAN index."
    INDEX   { gDot1qVlanSlotIndex }
    ::= { gDot1qVlanIndexMappingTable 1 }

GarpDot1qVlanIndexMappingEntry ::=
    SEQUENCE {
        gDot1qVlanSlotIndex
            INTEGER,
        gDot1qVlanSlotActualIndex
            VlanIndex
    }

gDot1qVlanSlotIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..64)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The durable slot index for this VLAN"
    ::= { gDot1qVlanIndexMappingEntry 1 }

gDot1qVlanSlotActualIndex OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
         The actual VLAN index for this durable VLAN slot"
    ::= { gDot1qVlanIndexMappingEntry 2 }

-- -------------------------------------------------------------
-- the gDot1qTp group
-- -------------------------------------------------------------

-- -------------------------------------------------------------
-- the current Filtering Database Table
-- -------------------------------------------------------------

gDot1qFdbTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qFdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains configuration and control
        information for each Filtering Database currently
        operating on this device.  Entries in this table appear
        automatically when VLANs are assigned FDB IDs in the
        gDot1qVlanCurrentTable."
    ::= { gDot1qTp 1 }

gDot1qFdbEntry OBJECT-TYPE
    SYNTAX      GarpDot1qFdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific Filtering Database."
    INDEX   { gDot1qFdbId }
    ::= { gDot1qFdbTable 1 }

GarpDot1qFdbEntry ::=
    SEQUENCE {
        gDot1qFdbId
            Unsigned32,
        gDot1qFdbDynamicCount
            Counter32
    }

gDot1qFdbId OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The identity of this Filtering Database."
    ::= { gDot1qFdbEntry 1 }

gDot1qFdbDynamicCount OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The current number of dynamic entries in this
        Filtering Database."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.1.1.3"
    ::= { gDot1qFdbEntry 2 }

-- -------------------------------------------------------------
-- Multiple Forwarding Databases for 802.1Q Transparent devices
-- This table is an alternative to the dot1dTpFdbTable,
-- previously defined for 802.1D devices which only support a
-- single Forwarding Database.
-- -------------------------------------------------------------

gDot1qTpFdbTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qTpFdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains information about unicast entries
        for which the device has forwarding and/or filtering
        information.  This information is used by the
        transparent bridging function in determining how to
        propagate a received frame."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.7"
    ::= { gDot1qTp 2 }

gDot1qTpFdbEntry OBJECT-TYPE
    SYNTAX      GarpDot1qTpFdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a specific unicast MAC address for
        which the device has some forwarding and/or filtering
        information."
    INDEX   { gDot1qFdbId, gDot1qTpFdbAddress }
    ::= { gDot1qTpFdbTable 1 }

GarpDot1qTpFdbEntry ::=
    SEQUENCE {
        gDot1qTpFdbAddress
            MacAddress,
        gDot1qTpFdbPort
            INTEGER,
        gDot1qTpFdbStatus
            INTEGER
    }

gDot1qTpFdbAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A unicast MAC address for which the device has
        forwarding and/or filtering information."
    ::= { gDot1qTpFdbEntry 1 }

gDot1qTpFdbPort OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Either the value '0', or the port number of the port on
        which a frame having a source address equal to the value
        of the corresponding instance of gDot1qTpFdbAddress has
        been seen.  A value of '0' indicates that the port
        number has not been learned but that the device does
        have some forwarding/filtering information about this
        address (e.g. in the gDot1qStaticUnicastTable).
        Implementors are encouraged to assign the port value to
        this object whenever it is learned even for addresses
        for which the corresponding value of gDot1qTpFdbStatus is
        not learned(3)."
    ::= { gDot1qTpFdbEntry 2 }

gDot1qTpFdbStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    invalid(2),
                    learned(3),
                    self(4),
                    mgmt(5)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of this entry.  The meanings of the values
        are:
            other(1) - none of the following.  This may include
                the case where some other MIB object (not the
                corresponding instance of gDot1qTpFdbPort, nor an
                entry in the gDot1qStaticUnicastTable) is being
                used to determine if and how frames addressed to
                the value of the corresponding instance of
                gDot1qTpFdbAddress are being forwarded.
            invalid(2) - this entry is no longer valid (e.g., it
                was learned but has since aged out), but has not
                yet been flushed from the table.
            learned(3) - the value of the corresponding instance
                of gDot1qTpFdbPort was learned and is being used.
            self(4) - the value of the corresponding instance of
                gDot1qTpFdbAddress represents one of the device's
                addresses.  The corresponding instance of
                gDot1qTpFdbPort indicates which of the device's
                ports has this address.
            mgmt(5) - the value of the corresponding instance of
                gDot1qTpFdbAddress is also the value of an
                existing instance of gDot1qStaticAddress."
    ::= { gDot1qTpFdbEntry 3 }
-- -------------------------------------------------------------
-- Dynamic Group Registration Table
-- -------------------------------------------------------------

gDot1qTpGroupTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qTpGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing filtering information for VLANs
        configured into the bridge by (local or network)
        management, or learnt dynamically, specifying the set of
        ports to which frames received on a VLAN for this FDB
        and containing a specific Group destination address are
        allowed to be forwarded."
    ::= { gDot1qTp 3 }

gDot1qTpGroupEntry OBJECT-TYPE
    SYNTAX      GarpDot1qTpGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Filtering information configured into the bridge by
        management, or learnt dynamically, specifying the set of
        ports to which frames received on a VLAN and containing
        a specific Group destination address, are allowed to be
        forwarded.  The subset of these ports learnt dynamically
        is also provided."
    INDEX   { gDot1qVlanIndex, gDot1qTpGroupAddress }
    ::= { gDot1qTpGroupTable 1 }

GarpDot1qTpGroupEntry ::=
    SEQUENCE {
        gDot1qTpGroupAddress
            MacAddress,
        gDot1qTpGroupEgressPorts
            PortList,
        gDot1qTpGroupLearnt
            PortList
    }

gDot1qTpGroupAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The destination Group MAC address in a frame to which
        this entry's filtering information applies."
    ::= { gDot1qTpGroupEntry 1 }

gDot1qTpGroupEgressPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The complete set of ports, in this VLAN, to which
        frames destined for this Group MAC address are currently
        being explicitly forwarded.  This does not include ports
        for which this address is only implicitly forwarded, in
        the gDot1qForwardAllPorts list."
    ::= { gDot1qTpGroupEntry 2 }

gDot1qTpGroupLearnt OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The subset of ports in gDot1qTpGroupEgressPorts which
        were learnt by GMRP or some other dynamic mechanism, in
        this Filtering database."
    ::= { gDot1qTpGroupEntry 3 }

-- -------------------------------------------------------------
-- Service Requirements Group
-- -------------------------------------------------------------

gDot1qForwardAllTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qForwardAllEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing forwarding information for each
        VLAN, specifying the set of ports to which forwarding of
        all multicasts applies, configured statically by
        management or dynamically by GMRP.  An entry appears in
        this table for all VLANs that are currently
        instantiated."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
    ::= { gDot1qTp 4 }
gDot1qForwardAllEntry OBJECT-TYPE
    SYNTAX      GarpDot1qForwardAllEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Forwarding information for a VLAN, specifying the set
        of ports to which all multicasts should be forwarded,
        configured statically by management or dynamically by
        GMRP."
--
-- This table is actually indexed by VLAN ID, however for the purposes
-- of default value table generation, we introduce a phony index of 
-- the dimension of the VLAN slot table.
--
--    INDEX   { gDot1qVlanIndex }
--
    INDEX   { gDot1qVlanSlotIndex }	-- Don't use this index at runtime
    ::= { gDot1qForwardAllTable 1 }

GarpDot1qForwardAllEntry ::=
    SEQUENCE {
        gDot1qForwardAllPorts
            PortList,
		gDot1qForwardAllVlanIndex
			VlanIndex,
        gDot1qForwardAllStaticPorts
            PortList,
        gDot1qForwardAllForbiddenPorts
            PortList
    }

gDot1qForwardAllPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The complete set of ports in this VLAN to which all
        multicast group-addressed frames are to be forwarded.
        This includes ports for which this need has been
        determined dynamically by GMRP, or configured statically
        by management."
    ::= { gDot1qForwardAllEntry 1 }

gDot1qForwardAllVlanIndex OBJECT-TYPE
	SYNTAX		VlanIndex
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	
		"DURABLE: { 0:all }
		This is here only to allow the VLAN index to be saved along
		with the corresponding forward all table entry."
	::= { gDot1qForwardAllEntry 2 }

gDot1qForwardAllStaticPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports configured by management in this VLAN
        to which all multicast group-addressed frames are to be
        forwarded.  Ports entered in this list will also appear
        in the complete set shown by gDot1qForwardAllPorts.  This
        value will be restored after the device is reset.  This
        only applies to ports that are members of the VLAN,
        defined by gDot1qVlanCurrentEgressPorts.  A port may not
        be added in this set if it is already a member of the
        set of ports in gDot1qForwardAllForbiddenPorts.  The
        default value is a string of ones of appropriate length,
        to indicate standard non-EFS behaviour, i.e.  forward
        all multicasts to all ports."
    ::= { gDot1qForwardAllEntry 3 }

gDot1qForwardAllForbiddenPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports configured by management in this VLAN
        for which the Service Requirement attribute Forward All
        Multicast Groups may not be dynamically registered by
        GMRP.  This value will be restored after the device is
        reset.  A port may not be added in this set if it is
        already a member of the set of ports in
        gDot1qForwardAllStaticPorts.  The default value is a
        string of zeros of appropriate length."
    ::= { gDot1qForwardAllEntry 4 }

gDot1qForwardUnregisteredTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qForwardUnregisteredEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing forwarding information for each
        VLAN, specifying the set of ports to which forwarding of
        multicast group-addressed frames for which there is no
        more specific forwarding information applies.  This is
        configured statically by management and determined
        dynamically by GMRP.  An entry appears in this table for
        all VLANs that are currently instantiated."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
    ::= { gDot1qTp 5 }

gDot1qForwardUnregisteredEntry OBJECT-TYPE
    SYNTAX      GarpDot1qForwardUnregisteredEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Forwarding information for a VLAN, specifying the set
        of ports to which all multicasts for which there is no
        more specific forwarding information shall be forwarded.
        This is configured statically by management or
        dynamically by GMRP."
--
-- This table is actually indexed by VLAN ID, however for the purposes
-- of default value table generation, we introduce a phony index of 
-- the dimension of the VLAN slot table.
--
--    INDEX   { gDot1qVlanIndex }
--
    INDEX   { gDot1qVlanSlotIndex }	-- Don't use this index at runtime
    ::= { gDot1qForwardUnregisteredTable 1 }

GarpDot1qForwardUnregisteredEntry ::=
    SEQUENCE {
        gDot1qForwardUnregisteredPorts
            PortList,
		gDot1qForwardUnregisteredVlanIndex
			VlanIndex,
        gDot1qForwardUnregisteredStaticPorts
            PortList,
        gDot1qForwardUnregisteredForbiddenPorts
            PortList
    }

gDot1qForwardUnregisteredPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The complete set of ports in this VLAN to which
        multicast group-addressed frames for which there is no
        more specific forwarding information will be forwarded.
        This includes ports for which this need has been
        determined dynamically by GMRP, or configured statically
        by management."
    ::= { gDot1qForwardUnregisteredEntry 1 }

gDot1qForwardUnregisteredVlanIndex OBJECT-TYPE
	SYNTAX		VlanIndex
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	
		"DURABLE: { 0:all }
		This is here only to allow the VLAN index to be saved along
		with the corresponding forward unregistered table entry."
	::= { gDot1qForwardUnregisteredEntry 2 }

gDot1qForwardUnregisteredStaticPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all } 
		The set of ports configured by management, in this
        VLAN, to which multicast group-addressed frames for
        which there is no more specific forwarding information
        are to be forwarded.  Ports entered in this list will
        also appear in the complete set shown by
        gDot1qForwardUnregisteredPorts.  This value will be
        restored after the device is reset.  A port may not be
        added in this set if it is already a member of the set
        of ports in gDot1qForwardUnregisteredForbiddenPorts.  The
        default value is a string of zeros of appropriate
        length, although this has no effect with the default
        value of gDot1qForwardAllStaticPorts."
    ::= { gDot1qForwardUnregisteredEntry 3 }

gDot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all } 
		The set of ports configured by management in this VLAN
        for which the Service Requirement attribute Forward
        Unregistered Multicast Groups may not be dynamically
        registered by GMRP.  This value will be restored after
        the device is reset.  A port may not be added in this
        set if it is already a member of the set of ports in
        gDot1qForwardUnregisteredStaticPorts.  The default value
        is a string of zeros of appropriate length."
    ::= { gDot1qForwardUnregisteredEntry 4 }

-- -------------------------------------------------------------
-- The Static (Destination-Address Filtering) Database
-- -------------------------------------------------------------

gDot1qStaticUnicastTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qStaticUnicastEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing filtering information for Unicast
        MAC addresses for each Filtering Database, configured
        into the device by (local or network) management
        specifying the set of ports to which frames received
        from specific ports and containing specific unicast
        destination addresses are allowed to be forwarded.  A
        value of zero in this table as the port number from
        which frames with a specific destination address are
        received, is used to specify all ports for which there
        is no specific entry in this table for that particular
        destination address.  Entries are valid for unicast
        addresses only."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.7,
        ISO/IEC 15802-3 Section 7.9.1"
    ::= { gDot1qStatic 1 }

gDot1qStaticUnicastEntry OBJECT-TYPE
    SYNTAX      GarpDot1qStaticUnicastEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Filtering information configured into the device by
        (local or network) management specifying the set of
        ports to which frames received from a specific port and
        containing a specific unicast destination address are
        allowed to be forwarded."
    INDEX   {
        gDot1qFdbId,
        gDot1qStaticUnicastAddress,
        gDot1qStaticUnicastReceivePort
    }
    ::= { gDot1qStaticUnicastTable 1 }

GarpDot1qStaticUnicastEntry ::=
    SEQUENCE {
        gDot1qStaticUnicastAddress
            MacAddress,
        gDot1qStaticUnicastReceivePort
            INTEGER,
        gDot1qStaticUnicastAllowedToGoTo
            PortList,
        gDot1qStaticUnicastStatus
            INTEGER
    }

gDot1qStaticUnicastAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The destination MAC address in a frame to which this
        entry's filtering information applies.  This object must
        take the value of a unicast address."
    ::= { gDot1qStaticUnicastEntry 1 }

gDot1qStaticUnicastReceivePort OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Either the value '0', or the port number of the port
        from which a frame must be received in order for this
        entry's filtering information to apply.  A value of zero
        indicates that this entry applies on all ports of the
        device for which there is no other applicable entry."
    ::= { gDot1qStaticUnicastEntry 2 }

gDot1qStaticUnicastAllowedToGoTo OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The set of ports for which a frame with a specific
        unicast address will be flooded in the event that it
        has not been learned.  It also specifies the set of
        ports a specific unicast address may be dynamically
        learnt on.  The gDot1qTpFdbTable will have an equivalent
        entry with a gDot1qTpFdbPort value of '0' until this
        address has been learnt, when it will be updated with
        the port the address has been seen on.  This only
        applies to ports that are members of the VLAN, defined
        by gDot1qVlanCurrentEgressPorts.  The default value of
        this object is a string of ones of appropriate length."
    REFERENCE
        "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
    ::= { gDot1qStaticUnicastEntry 3 }

gDot1qStaticUnicastStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    invalid(2),
                    permanent(3),
                    deleteOnReset(4),
                    deleteOnTimeout(5)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry.
            other(1) - this entry is currently in use but
                the conditions under which it will remain
                so differ from the following values.
            invalid(2) - writing this value to the object
                removes the corresponding entry.
            permanent(3) - this entry is currently in use
                and will remain so after the next reset of
                the bridge.
            deleteOnReset(4) - this entry is currently in
                use and will remain so until the next
                reset of the bridge.
            deleteOnTimeout(5) - this entry is currently in
                use and will remain so until it is aged out."
    DEFVAL      { permanent }
    ::= { gDot1qStaticUnicastEntry 4 }

gDot1qStaticMulticastTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qStaticMulticastEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing filtering information for Multicast
        and Broadcast MAC addresses for each VLAN, configured
        into the device by (local or network) management
        specifying the set of ports to which frames received
        from specific ports and containing specific Multicast
        and Broadcast destination addresses are allowed to be
        forwarded.  A value of zero in this table as the port
        number from which frames with a specific destination
        address are received, is used to specify all ports for
        which there is no specific entry in this table for that
        particular destination address.  Entries are valid for
        Multicast and Broadcast addresses only."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.7,
        ISO/IEC 15802-3 Section 7.9.1"
    ::= { gDot1qStatic 2 }

gDot1qStaticMulticastEntry OBJECT-TYPE
    SYNTAX      GarpDot1qStaticMulticastEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Filtering information configured into the device by
        (local or network) management specifying the set of
        ports to which frames received from this specific port
        for this VLAN and containing this Multicast or Broadcast
        destination address are allowed to be forwarded."
    INDEX   {
        gDot1qVlanIndex,
        gDot1qStaticMulticastAddress,
        gDot1qStaticMulticastReceivePort
    }
    ::= { gDot1qStaticMulticastTable 1 }

GarpDot1qStaticMulticastEntry ::=
    SEQUENCE {
		gDot1qStaticMulticastVlanIndex
			VlanIndex,
        gDot1qStaticMulticastAddress
            MacAddress,
        gDot1qStaticMulticastReceivePort
            INTEGER,
        gDot1qStaticMulticastStaticEgressPorts
            PortList,
        gDot1qStaticMulticastForbiddenEgressPorts
            PortList,
        gDot1qStaticMulticastStatus
            INTEGER,
        gDot1qGmrpLearningPermit
            INTEGER
    }

gDot1qStaticMulticastVlanIndex OBJECT-TYPE
	SYNTAX		VlanIndex
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"DURABLE: { 0:all }
		This is here to allow the VLAN Index to be saved along with
		the corresponding multicast table entry."
	::= { gDot1qStaticMulticastEntry 1 }
	
gDot1qStaticMulticastAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all}
		The destination MAC address in a frame to which this
        entry's filtering information applies.  This object must
        take the value of a Multicast or Broadcast address."
    ::= { gDot1qStaticMulticastEntry 2 }

gDot1qStaticMulticastReceivePort OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		Either the value '0', or the port number of the port
        from which a frame must be received in order for this
        entry's filtering information to apply.  A value of zero
        indicates that this entry applies on all ports of the
        device for which there is no other applicable entry."
    ::= { gDot1qStaticMulticastEntry 3 }

gDot1qStaticMulticastStaticEgressPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports to which frames received from a
        specific port and destined for a specific Multicast or
        Broadcast MAC address must be forwarded, regardless of
        any dynamic information e.g. from GMRP.  A port may not
        be added in this set if it is already a member of the
        set of ports in gDot1qStaticMulticastForbiddenEgressPorts.
        The default value of this object is a string of ones of
        appropriate length."
    ::= { gDot1qStaticMulticastEntry 4 }

gDot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports to which frames received from a
        specific port and destined for a specific Multicast or
        Broadcast MAC address must not be forwarded, regardless
        of any dynamic information e.g. from GMRP.  A port may
        not be added in this set if it is already a member of the
        set of ports in gDot1qStaticMulticastStaticEgressPorts.
        The default value of this object is a string of zeros of
        appropriate length."
    ::= { gDot1qStaticMulticastEntry 5 }

gDot1qStaticMulticastStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    invalid(2),
                    permanent(3),
                    deleteOnReset(4),
                    deleteOnTimeout(5)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		This object indicates the status of this entry.
            other(1) - this entry is currently in use but
                the conditions under which it will remain
                so differ from the following values.
            invalid(2) - writing this value to the object
                removes the corresponding entry.
            permanent(3) - this entry is currently in use
                and will remain so after the next reset of
                the bridge.
            deleteOnReset(4) - this entry is currently in
                use and will remain so until the next
                reset of the bridge.
            deleteOnTimeout(5) - this entry is currently in
                use and will remain so until it is aged out."
    DEFVAL      { permanent }
    ::= { gDot1qStaticMulticastEntry 6 }

gDot1qGmrpLearningPermit OBJECT-TYPE
    SYNTAX      INTEGER {
            gmrpLearningEnable(1),
            gmrpLearningDisable(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is used to add a mcast to garp so that other devices can learn it."
    ::= { gDot1qStaticMulticastEntry 7 }

-- -------------------------------------------------------------
-- The Current VLAN Database
-- -------------------------------------------------------------

gDot1qVlanNumDeletes OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of times a VLAN entry has been deleted from
        the gDot1qVlanCurrentTable (for any reason).  If an entry
        is deleted, then inserted, and then deleted, this
        counter will be incremented by 2."
    ::= { gDot1qVlan 1 }

gDot1qVlanCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing current configuration information
        for each VLAN currently configured into the device by
        (local or network) management, or dynamically created
        as a result of GVRP requests received."
    ::= { gDot1qVlan 2 }

gDot1qVlanCurrentEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information for a VLAN configured into the device by
        (local or network) management, or dynamically created
        as a result of GVRP requests received."
    INDEX   { gDot1qVlanTimeMark, gDot1qVlanIndex }
    ::= { gDot1qVlanCurrentTable 1 }

GarpDot1qVlanCurrentEntry ::=
    SEQUENCE {
        gDot1qVlanTimeMark
            TimeFilter,
        gDot1qVlanIndex
            VlanIndex,
        gDot1qVlanFdbId
            Unsigned32,
        gDot1qVlanCurrentEgressPorts
            PortList,
        gDot1qVlanCurrentUntaggedPorts
            PortList,
        gDot1qVlanStatus
            INTEGER,
        gDot1qVlanCreationTime
            TimeTicks
    }

gDot1qVlanTimeMark OBJECT-TYPE
    SYNTAX      TimeFilter
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A TimeFilter for this entry.  See the TimeFilter
        textual convention to see how this works."
    ::= { gDot1qVlanCurrentEntry 1 }

gDot1qVlanIndex OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VLAN-ID or other identifier refering to this VLAN."
    ::= { gDot1qVlanCurrentEntry 2 }

gDot1qVlanFdbId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Filtering Database used by this VLAN.  This is one
        of the gDot1qFdbId values in the gDot1qFdbTable.  This
        value is allocated automatically by the device whenever
        the VLAN is created: either dynamically by GVRP, or by
        management, in gDot1qVlanStaticTable.  Allocation of this
        value follows the learning constraints defined for this
        VLAN in gDot1qLearningConstraintsTable."
    ::= { gDot1qVlanCurrentEntry 3 }

gDot1qVlanCurrentEgressPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The set of ports which are transmitting traffic for
        this VLAN as either tagged or untagged frames."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.2.1"
    ::= { gDot1qVlanCurrentEntry 4 }

gDot1qVlanCurrentUntaggedPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The set of ports which are transmitting traffic for
        this VLAN as untagged frames."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.2.1"
    ::= { gDot1qVlanCurrentEntry 5 }

gDot1qVlanStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    permanent(2),
                    dynamicGvrp(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry.
            other(1) - this entry is currently in use but the
                conditions under which it will remain so differ
                from the following values.
            permanent(2) - this entry, corresponding to an entry
                in gDot1qVlanStaticTable, is currently in use and
                will remain so after the next reset of the
                device.  The port lists for this entry include
                ports from the equivalent gDot1qVlanStaticTable
                entry and ports learnt dynamically.
            dynamicGvrp(3) - this entry is currently in use
                and will remain so until removed by GVRP.  There
                is no static entry for this VLAN and it will be
                removed when the last port leaves the VLAN."
    ::= { gDot1qVlanCurrentEntry 6 }

gDot1qVlanCreationTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime when this VLAN was created."
    ::= { gDot1qVlanCurrentEntry 7 }

-- -------------------------------------------------------------
-- The Static VLAN Database
-- -------------------------------------------------------------

gDot1qVlanStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing static configuration information for
        each VLAN configured into the device by (local or
        network) management.  All entries are permanent and will
        be restored after the device is reset."
    ::= { gDot1qVlan 3 }

gDot1qVlanStaticEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Static information for a VLAN configured into the
        device by (local or network) management."
--
-- This table is actually indexed by VLAN ID, however for the purposes
-- of default value table generation, we introduce a phony index of 
-- the dimension of the VLAN slot table.
--
--    INDEX   { gDot1qVlanIndex }
--
    INDEX   { gDot1qVlanSlotIndex }	-- Don't use this index at runtime
    ::= { gDot1qVlanStaticTable 1 }

GarpDot1qVlanStaticEntry ::=
    SEQUENCE {
        gDot1qVlanStaticName
			DisplayString,
--            SnmpAdminString,
        gDot1qVlanStaticEgressPorts
            PortList,
        gDot1qVlanForbiddenEgressPorts
            PortList,
        gDot1qVlanStaticUntaggedPorts
            PortList,
        gDot1qVlanStaticRowStatus
            RowStatus,
        gDot1qGvrpLearningPermit
                INTEGER,  
        gDot1qVlanSpanningTreeGroup
                INTEGER
                
    }

gDot1qVlanStaticName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
--    SYNTAX      SnmpAdminString (SIZE (0..32))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "DURABLE: { 'Default' }
		An administratively assigned string, which may be used
        to identify the VLAN."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.2.1"
    ::= { gDot1qVlanStaticEntry 1 }

gDot1qVlanStaticEgressPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports which are permanently assigned to the
        egress list for this VLAN by management.  Changes to a
        bit in this object affect the per-port per-VLAN
        Registrar control for Registration Fixed for the
        relevant GVRP state machine on each port.  A port may
        not be added in this set if it is already a member of
        the set of ports in gDot1qVlanForbiddenEgressPorts.  The
        default value of this object is a string of zeros of
        appropriate length, indicating not fixed."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
    ::= { gDot1qVlanStaticEntry 2 }

gDot1qVlanForbiddenEgressPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports which are prohibited by management
        from being included in the egress list for this VLAN.
        Changes to this object that cause a port to be included
        or excluded affect the per-port per-VLAN Registrar
        control for Registration Forbidden for the relevant GVRP
        state machine on each port.  A port may not be added in
        this set if it is already a member of the set of ports
        in gDot1qVlanStaticEgressPorts.  The default value of
        this object is a string of zeros of appropriate length,
        excluding all ports from the forbidden set."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
    ::= { gDot1qVlanStaticEntry 3 }

gDot1qVlanStaticUntaggedPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "DURABLE: { 0:all }
		The set of ports which should transmit egress packets
        for this VLAN as untagged.  The default value of this
        object for the default VLAN (gDot1qVlanIndex = 1) is a string
        of appropriate length including all ports.  There is no
        specified default for other VLANs.  If a device agent cannot
        support the set of ports being set then it will reject the
        set operation with an error. An example might be if a
        manager attempts to set more than one VLAN to be untagged
        on egress where the device does not support this IEEE 802.1Q
        option."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.2.1"
    ::= { gDot1qVlanStaticEntry 4 }

gDot1qVlanStaticRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry."
    ::= { gDot1qVlanStaticEntry 5 }

gDot1qGvrpLearningPermit OBJECT-TYPE
    SYNTAX      INTEGER {
    	gvrpLearningEnable(1),
    	gvrpLearningDisable(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is used to add a vlan to garp so that other devices can learn it."
        --将一个vlan加入到garp中以允许其他交换机学习该vlan
    ::= { gDot1qVlanStaticEntry 6 }
    
gDot1qVlanSpanningTreeGroup OBJECT-TYPE
    	SYNTAX      INTEGER (0..15)
    	MAX-ACCESS  read-write
    	STATUS      current
    	DESCRIPTION
    	    "This object is used to Get/Set current vlan's spanning-tree group num"
    	    --用于获取/设置vlan的生成树组
    ::= { gDot1qVlanStaticEntry 7 }
    	
gDot1qNextFreeLocalVlanIndex OBJECT-TYPE
    SYNTAX      INTEGER (0|4096..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The next available value for gDot1qVlanIndex of a local
        VLAN entry in gDot1qVlanStaticTable.  This will report
        values >=4096 if a new Local VLAN may be created or else
        the value 0 if this is not possible.

        A row creation operation in this table for an entry with a local
        VlanIndex value may fail if the current value of this object
        is not used as the index. Even if the value read is used,
        there is no guarantee that it will still be the valid index
        when the create operation is attempted - another manager may
        have already got in during the intervening time interval.
        In this case, gDot1qNextFreeLocalVlanIndex should be re-read
        and the creation re-tried with the new value.

        This value will automatically change when the current value is
        used to create a new row."
    ::= { gDot1qVlan 4 }

-- -------------------------------------------------------------
-- The VLAN Port Configuration Table
-- -------------------------------------------------------------

gDot1qPortVlanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qPortVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing per port control and status
        information for VLAN configuration in the device."
    ::= { gDot1qVlan 5 }

gDot1qPortVlanEntry OBJECT-TYPE
    SYNTAX      GarpDot1qPortVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information controlling VLAN configuration for a port
        on the device.  This is indexed by dot1dBasePort."
	INDEX   { gDot1dPortGmrp }
    ::= { gDot1qPortVlanTable 1 }

GarpDot1qPortVlanEntry ::=
    SEQUENCE {
        gDot1qPvid
            VlanIndex,
        gDot1qPortAcceptableFrameTypes
            INTEGER,
        gDot1qPortIngressFiltering
            TruthValue,
        gDot1qPortGvrpStatus
            EnabledStatus,
        gDot1qPortGvrpFailedRegistrations
            Counter32,
        gDot1qPortGvrpLastPduOrigin
            MacAddress
    }

gDot1qPvid OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 1:all }
		The PVID, the VLAN ID assigned to untagged frames or
        Prority-Tagged frames received on this port."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.1.1"
    DEFVAL      { 1 }
    ::= { gDot1qPortVlanEntry 1 }

gDot1qPortAcceptableFrameTypes OBJECT-TYPE
    SYNTAX      INTEGER {
                    admitAll(1),
                    admitOnlyVlanTagged(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 1:all }
		When this is admitOnlyVlanTagged(2) the device will
        discard untagged frames or Prority-Tagged frames
        received on this port.  When admitAll(1), untagged
        frames or Prority-Tagged frames received on this port
        will be accepted and assigned to the PVID for this port.

        This control does not affect VLAN independent BPDU
        frames, such as GVRP and STP.  It does affect VLAN
        dependent BPDU frames, such as GMRP."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.1.3"
    DEFVAL      { admitAll }
    ::= { gDot1qPortVlanEntry 2 }

gDot1qPortIngressFiltering OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: {1:all}
		When this is true(1) the device will discard incoming
        frames for VLANs which do not include this Port in its
        Member set.  When false(2), the port will accept all
        incoming frames.

        This control does not affect VLAN independent BPDU
        frames, such as GVRP and STP.  It does affect VLAN
        dependent BPDU frames, such as GMRP."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.1.4"
    DEFVAL      { false }
    ::= { gDot1qPortVlanEntry 3 }

gDot1qPortGvrpStatus OBJECT-TYPE
    SYNTAX      EnabledStatus { enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: {enabled:all}
		The state of GVRP operation on this port.  The value
        enabled(1) indicates that GVRP is enabled on this port,
        as long as gDot1qGvrpStatus is also enabled for this
        device.  When disabled(2) but gDot1qGvrpStatus is still
        enabled for the device, GVRP is disabled on this port:
        any GVRP packets received will be silently discarded and
        no GVRP registrations will be propagated from other
        ports.  This object affects all GVRP Applicant and
        Registrar state machines on this port.  A transition
        from disabled(2) to enabled(1) will cause a reset of all
        GVRP state machines on this port."
    DEFVAL      { disabled }
    ::= { gDot1qPortVlanEntry 4 }

gDot1qPortGvrpFailedRegistrations OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of failed GVRP registrations, for any
        reason, on this port."
    ::= { gDot1qPortVlanEntry 5 }

gDot1qPortGvrpLastPduOrigin OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Source MAC Address of the last GVRP message
        received on this port."
    ::= { gDot1qPortVlanEntry 6 }

-- -------------------------------------------------------------
-- The GARP Port Table
-- -------------------------------------------------------------

gDot1dPortGarpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1dPortGarpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of GARP control information about every bridge
        port.  This is indexed by gDot1qBasePort."
    ::= { gDot1dGarp 1 }

gDot1dPortGarpEntry OBJECT-TYPE
    SYNTAX      GarpDot1dPortGarpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "GARP control information for a bridge port."
	INDEX   { gDot1dPortGmrp }
    ::= { gDot1dPortGarpTable 1 }

GarpDot1dPortGarpEntry ::=
    SEQUENCE {
		gDot1dPortEnable
			INTEGER,
        gDot1dPortGarpJoinTime
            TimeInterval,
        gDot1dPortGarpLeaveTime
            TimeInterval,
        gDot1dPortGarpLeaveAllTime
            TimeInterval
    }

gDot1dPortEnable OBJECT-TYPE
    SYNTAX  INTEGER {
              enabled(1),
              disabled(2)
            }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
          "The enabled/disabled status of the port for all
			GARP protocol instances.  This should be set
			according to the current link state of the port"
    REFERENCE
           "IEEE 802.1D-1990: Section 4.5.5.2"
    ::= { gDot1dPortGarpEntry 1 }

gDot1dPortGarpJoinTime OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 20:all }
		The GARP Join time, in centiseconds."
    DEFVAL      { 20 }
    ::= { gDot1dPortGarpEntry 2 }

gDot1dPortGarpLeaveTime OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 60:all }
		The GARP Leave time, in centiseconds."
    DEFVAL      { 60 }
    ::= { gDot1dPortGarpEntry 3 }

gDot1dPortGarpLeaveAllTime OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { 1000:all }
		The GARP LeaveAll time, in centiseconds."
    DEFVAL      { 1000 }
    ::= { gDot1dPortGarpEntry 4 }

gDot1dGmrpStatus OBJECT-TYPE
    SYNTAX      EnabledStatus { enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { enabled }
		 The administrative status requested by management for
        GMRP.  The value enabled(1) indicates that GMRP should
        be enabled on this device, in all VLANs, on all ports
        for which it has not been specifically disabled.  When
        disabled(2), GMRP is disabled, in all VLANs, on all
        ports and all GMRP packets will be forwarded
        transparently.  This object affects both Applicant and
        Registrar state machines.  A transition from disabled(2)
        to enabled(1) will cause a reset of all GMRP state
        machines on all ports."
    DEFVAL      { disabled }
    ::= { gDot1dExtBase 1 }

-- -------------------------------------------------------------
-- The GMRP Port Configuration and Status Table
-- -------------------------------------------------------------

gDot1dPortGmrpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1dPortGmrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of GMRP control and status information about
        every bridge port.  Augments the gDot1qBasePortTable."
    ::= { gDot1dGmrp 1 }

gDot1dPortGmrpEntry OBJECT-TYPE
    SYNTAX      GarpDot1dPortGmrpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "GMRP control and status information for a bridge port."
	INDEX   { gDot1dPortGmrp }
    ::= { gDot1dPortGmrpTable 1 }

GarpDot1dPortGmrpEntry ::=
    SEQUENCE {
		gDot1dPortGmrp
			INTEGER,
        gDot1dPortGmrpStatus
            EnabledStatus,
        gDot1dPortGmrpFailedRegistrations
            Counter32,
        gDot1dPortGmrpLastPduOrigin
            MacAddress
    }

gDot1dPortGmrp OBJECT-TYPE
	SYNTAX		INTEGER (1..128)
	MAX-ACCESS	read-only
	STATUS		current
    DESCRIPTION
        "The port number of the port for which this entry
         contains GMRP management information."
    REFERENCE
        "IEEE 802.1D-1990: Section 6.8.2.1.2"
    ::= { gDot1dPortGmrpEntry 1 }

gDot1dPortGmrpStatus OBJECT-TYPE
    SYNTAX      EnabledStatus { enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DURABLE: { enabled:all }
		The administrative state of GMRP operation on this port. The
        value enabled(1) indicates that GMRP is enabled on this port
        in all VLANs as long as garpGmrpStatus is also enabled(1).
        A value of disabled(2) indicates that GMRP is disabled on this
        port in all VLANs: any GMRP packets received will
        be silently discarded and no GMRP registrations will be
        propagated from other ports. Setting this to a value of
        enabled(1) will be stored by the agent but will only take effect
        on the GMRP protocol operation if garpGmrpStatus also
        indicates the value enabled(1).  This object affects all
        GMRP Applicant and Registrar state machines on this
        port.  A transition from disabled(2) to enabled(1) will
        cause a reset of all GMRP state machines on this port."
    DEFVAL      { disabled }
    ::= { gDot1dPortGmrpEntry 2 }

gDot1dPortGmrpFailedRegistrations OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of failed GMRP registrations, for any
        reason, in all VLANs, on this port."
    ::= { gDot1dPortGmrpEntry 3 }

gDot1dPortGmrpLastPduOrigin OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Source MAC Address of the last GMRP message
        received on this port."
    ::= { gDot1dPortGmrpEntry 4 }


-- -------------------------------------------------------------
-- The VLAN Learning Constraints Table
-- -------------------------------------------------------------

gDot1qLearningConstraintsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qLearningConstraintsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table containing learning constraints for sets of
        Shared and Independendent VLANs."
    REFERENCE
        "IEEE 802.1Q/D11 Section 12.10.3.1"
    ::= { gDot1qVlan 6 }

gDot1qLearningConstraintsEntry OBJECT-TYPE
    SYNTAX      GarpDot1qLearningConstraintsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A learning constraint defined for a VLAN."
    INDEX   { gDot1qConstraintVlan, gDot1qConstraintSet }
    ::= { gDot1qLearningConstraintsTable 1 }

GarpDot1qLearningConstraintsEntry ::=
    SEQUENCE {
        gDot1qConstraintVlan
            VlanIndex,
        gDot1qConstraintSet
            INTEGER,
        gDot1qConstraintType
            INTEGER,
        gDot1qConstraintStatus
            RowStatus
    }

gDot1qConstraintVlan OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of the row in gDot1qVlanCurrentTable for the
        VLAN constrained by this entry."
    ::= { gDot1qLearningConstraintsEntry 1 }

gDot1qConstraintSet OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The identity of the constraint set to which
        gDot1qConstraintVlan belongs.  These values may be chosen
        by the management station."
    ::= { gDot1qLearningConstraintsEntry 2 }

gDot1qConstraintType OBJECT-TYPE
    SYNTAX      INTEGER {
                    independent(1),
                    shared(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The type of constraint this entry defines.
            independent(1) - the VLAN, gDot1qConstraintVlan,
                uses an independent filtering database from all
                other VLANs in the same set, defined by
                gDot1qConstraintSet.
            shared(2) - the VLAN, gDot1qConstraintVlan, shares
                the same filtering database as all other VLANs
                in the same set, defined by gDot1qConstraintSet."
    ::= { gDot1qLearningConstraintsEntry 3 }

gDot1qConstraintStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this entry."
    ::= { gDot1qLearningConstraintsEntry 4 }

gDot1qConstraintSetDefault OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The identity of the constraint set to which a VLAN
        belongs, if there is not an explicit entry for that VLAN
        in gDot1qLearningConstraintsTable."
    ::= { gDot1qVlan 7 }

gDot1qConstraintTypeDefault OBJECT-TYPE
    SYNTAX      INTEGER {
                    independent(1),
                    shared(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The type of constraint set to which a VLAN belongs, if
        there is not an explicit entry for that VLAN in
        gDot1qLearningConstraintsTable.  The types are as defined
        for gDot1qConstraintType."
    ::= { gDot1qVlan 8 }
	       
-- -------------------------------------------------------------
-- GARP MIB - Conformance Information
-- -------------------------------------------------------------

garpMIBConformance OBJECT IDENTIFIER ::= { garpMib 2 }
garpMIBGroups OBJECT IDENTIFIER ::= { garpMIBConformance 1 }
garpMIBCompliances OBJECT IDENTIFIER
    ::= { garpMIBConformance 2 }

-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------

garpMIBBaseGroup OBJECT-GROUP
    OBJECTS {
        gDot1qVlanVersionNumber,
        gDot1qMaxVlanId,
        gDot1qMaxSupportedVlans,
        gDot1qNumVlans,
        gDot1qGvrpStatus,
        gDot1qFdbDynamicCount,
        gDot1qTpFdbPort,
        gDot1qTpFdbStatus,
        gDot1qTpGroupEgressPorts,
        gDot1qTpGroupLearnt,
        gDot1qForwardAllPorts,
        gDot1qForwardAllStaticPorts,
        gDot1qForwardAllForbiddenPorts,
        gDot1qForwardUnregisteredPorts,
        gDot1qForwardUnregisteredStaticPorts,
        gDot1qForwardUnregisteredForbiddenPorts,
        gDot1qStaticUnicastAllowedToGoTo,
        gDot1qStaticUnicastStatus,
        gDot1qStaticMulticastStaticEgressPorts,
        gDot1qStaticMulticastForbiddenEgressPorts,
        gDot1qStaticMulticastStatus,
        gDot1qVlanNumDeletes,
        gDot1qVlanFdbId,
        gDot1qVlanCurrentEgressPorts,
        gDot1qVlanCurrentUntaggedPorts,
        gDot1qVlanStatus,
        gDot1qVlanCreationTime,
        gDot1qVlanStaticName,
        gDot1qVlanStaticEgressPorts,
        gDot1qVlanForbiddenEgressPorts,
        gDot1qVlanStaticUntaggedPorts,
        gDot1qVlanStaticRowStatus,
        gDot1qNextFreeLocalVlanIndex,
        gDot1qPvid,
        gDot1qPortAcceptableFrameTypes,
        gDot1qPortIngressFiltering,
        gDot1qPortGvrpStatus,
        gDot1qPortGvrpFailedRegistrations,
        gDot1qPortGvrpLastPduOrigin,
		gDot1dPortGarpJoinTime,
		gDot1dPortGarpLeaveTime,
		gDot1dPortGarpLeaveAllTime,
		gDot1dPortGmrpStatus,
		gDot1dPortGmrpFailedRegistrations,
		gDot1dPortGmrpLastPduOrigin,
		gDot1dGmrpStatus, 
        gDot1qConstraintType,
        gDot1qConstraintStatus,
        gDot1qConstraintSetDefault,
        gDot1qConstraintTypeDefault
    }
    STATUS      current
    DESCRIPTION
        "GARP module groups."
    ::= { garpMIBGroups 1 }
    
-- -------------------------------------------------------------
-- the gDot1qExtend group
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- the double tagging table
-- -------------------------------------------------------------
gDot1qDoubleTagging OBJECT-TYPE
    SYNTAX      INTEGER{
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The global QinQ status"
        --全局QinQ的状态
    ::= { gDot1qExtend 1 }
        
gDot1qTpid OBJECT-TYPE
    SYNTAX      INTEGER(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The tag protocol id of service provider, this value is used to
         determine if a incoming packets is tagged and used when insert a
         new tag"
       --用于配置服务提供者的vlan协议号,用于判断端口是否为tagged或者是
       --为报文插入一个新的tag头时使用
    ::= { gDot1qExtend 2 }
    
gDot1qDoubleTaggingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qDoubleTaggingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to config the double tagging function."
        --该表用于配置双tag头相关的功能.
    ::= { gDot1qExtend 3 }

gDot1qDoubleTaggingEntry OBJECT-TYPE
    SYNTAX      GarpDot1qDoubleTaggingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about double tagging table entry."
        --双tag表项
    INDEX   { gDot1qDoubleTaggingPort }
    ::= { gDot1qDoubleTaggingTable 1 }

GarpDot1qDoubleTaggingEntry ::=
    SEQUENCE {
        gDot1qDoubleTaggingPort
            INTEGER,
        gDot1qDoubleTaggingMode
            INTEGER,
        gDot1qPortInnerTpid
            INTEGER,
        gDot1qPortOuterTpid
            INTEGER
    }

gDot1qDoubleTaggingPort OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The index of double tagging entry."
        --双tag表的索引
    ::= { gDot1qDoubleTaggingEntry 1 }

gDot1qDoubleTaggingMode OBJECT-TYPE
    SYNTAX       INTEGER{
        dtagModeNone(0),
        dtagModeInternal(1),
        dtagModeExternal(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Port's 8021q-in-8021q mode:
        dtagModeNone means QinQ is disabled;
        dtagModeInternal means incoming pkt's will be inserted a tag
        if it has no tag or its' tag-id doesn't match that of the port.
        dtagModeExternal means incoming pkt's tag is always be ignored
        and a new tag is inserted."
       --配置端口的QinQ模式，dtagModeNone为关闭端口的QinQ，dtagModeInternal只有
       --vlan协议号与端口的配置不同时才在报文中插入新的tag头，dtagModeExternal意
       --味着端口总是忽略报文的tag属性而为报文新添一个tag头
    ::= { gDot1qDoubleTaggingEntry 2 }
    
gDot1qPortInnerTpid OBJECT-TYPE
    SYNTAX      INTEGER(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled."
       --双tag使能时,用于配置报文原始tag头的tpid
    ::= { gDot1qDoubleTaggingEntry 3 }

gDot1qPortOuterTpid OBJECT-TYPE
    SYNTAX      INTEGER(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Used to change the new tag's(i.e.service-provider tag) tpid of packet when dtag enabled."
       --双tag使能时,用于配置报文新tag头的tpid
    ::= { gDot1qDoubleTaggingEntry 4 }

gDot1qInnerTpid OBJECT-TYPE
    SYNTAX      INTEGER(1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled."
       --双tag使能时,用于配置报文原始tag头的tpid
    ::= { gDot1qExtend 4 }
-- -------------------------------------------------------------
-- the current VLAN MAC Table
-- -------------------------------------------------------------
gDot1qVlanMacTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanMacEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to assign a VLAN ID for a packet based on
         the source MAC Address. If an entry is found, then the VLAN 
         ID, PRIORITY of vlan mac table will be used for the packet."
        --该表用于基于报文的源MAC地址为报文添加一个tag头，如果找到匹配的表
        --项，那么VLAN MAC表的vlan id以及优先级就会被添加到报文上.
    ::= { gDot1qExtend 5 }

gDot1qVlanMacEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanMacEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan mac table entry."
        --vlan mac表项的信息
    INDEX   { gDot1qVlanMacAddress }
    ::= { gDot1qVlanMacTable 1 }

GarpDot1qVlanMacEntry ::=
    SEQUENCE {
        gDot1qVlanMacAddress
            MacAddress,
        gDot1qVlanMacNewVlanId
            INTEGER,
        gDot1qVlanMacNewPriority
            INTEGER,
        gDot1qVlanMacStatus
            INTEGER
    }

gDot1qVlanMacAddress OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The index of vlan mac table entry."
        --vlan mac表的索引
    ::= { gDot1qVlanMacEntry 1 }

gDot1qVlanMacNewVlanId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Vlan id to be assigned to the packet."
	--将要为报文添加的vlan id
    ::= { gDot1qVlanMacEntry 2 }
    
gDot1qVlanMacNewPriority OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Priority to be assigned to the packet."
        --将要为报文添加的优先级
    ::= { gDot1qVlanMacEntry 3 }
    
gDot1qVlanMacStatus OBJECT-TYPE
    SYNTAX       INTEGER {
        active(1),
    	createAndGo(2),
    	destroy(3)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "table entry status."
        --表项的状态
    ::= { gDot1qVlanMacEntry 4 }
-- -------------------------------------------------------------
-- the current VLAN SUBNET Table
-- -------------------------------------------------------------
gDot1qVlanSubnetTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanSubnetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to assign a VLAN ID for a packet based on
         the source IP Address."
        --该表用于基于报文的源ip为报文添加tag头
    ::= { gDot1qExtend 6 }

gDot1qVlanSubnetEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanSubnetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan subnet table entry."
        --vlan subnet表的表项信息
    INDEX   { gDot1qVlanSubnetIpAddress, gDot1qVlanSubnetIpMask }
    ::= { gDot1qVlanSubnetTable 1 }

GarpDot1qVlanSubnetEntry ::=
    SEQUENCE {
        gDot1qVlanSubnetIpAddress
            IpAddress,
        gDot1qVlanSubnetIpMask
            IpAddress,
        gDot1qVlanSubnetNewVlanId
            INTEGER,
        gDot1qVlanSubnetNewPriority
            INTEGER,
        gDot1qVlanSubnetStatus
            INTEGER
    }

gDot1qVlanSubnetIpAddress OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The first index of vlan subnet table entry."
        --vlan subnet 表的第一个索引
    ::= { gDot1qVlanSubnetEntry 1 }

gDot1qVlanSubnetIpMask OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The second index of vlan subnet table entry."
        --vlan subnet 表的第二个索引
    ::= { gDot1qVlanSubnetEntry 2 }
    
gDot1qVlanSubnetNewVlanId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Vlan id to be assigned to the packet."
        --将要为报文添加的vlan id
    ::= { gDot1qVlanSubnetEntry 3 }
    
gDot1qVlanSubnetNewPriority OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Priority to be assigned to the packet."
	--将要添加给报文的优先级值
    ::= { gDot1qVlanSubnetEntry 4 }

gDot1qVlanSubnetStatus OBJECT-TYPE
    SYNTAX       INTEGER {
        active(1),
    	createAndGo(2),
    	destroy(3)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "table entry status."
        --表项的状态
    ::= { gDot1qVlanSubnetEntry 5 }
-- -------------------------------------------------------------
-- the current VLAN PROTOCOL Table
-- -------------------------------------------------------------
gDot1qVlanProtoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanProtoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to assign a VLAN for a packet based 
         on the protocol(FrameType,EtherType)and the ingress port."
        --该表用于基于报文的协议字段为报文添加新的tag头
    ::= { gDot1qExtend 7 }

gDot1qVlanProtoEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanProtoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan protocol table entry."
        --基于协议的vlan表的表项
    INDEX   { gDot1qVlanProtoFrameType, gDot1qVlanProtoEthertype, gDot1qVlanProtoPortId }
    ::= { gDot1qVlanProtoTable 1 }

GarpDot1qVlanProtoEntry ::=
    SEQUENCE {
        gDot1qVlanProtoFrameType
            INTEGER,
        gDot1qVlanProtoEthertype
            INTEGER,
        gDot1qVlanProtoPortId
            INTEGER,
        gDot1qVlanProtoNewVlanId
            INTEGER,
        gDot1qVlanProtoStatus
            INTEGER
    }

gDot1qVlanProtoFrameType OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Frame type：the first index of vlan protocol entry."
        --Frame type：基于协议的vlan表的第一个索引.
    ::= { gDot1qVlanProtoEntry 1 }

gDot1qVlanProtoEthertype OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Ether type：the second index of vlan protocol entry."
        --Ether type：基于协议的vlan表的第二个索引.
    ::= { gDot1qVlanProtoEntry 2 }
    
gDot1qVlanProtoPortId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Ingress, wthe third index of vlan protocol entry."
        --报文的入端口,基于协议的vlan表的第三个索引
    ::= { gDot1qVlanProtoEntry 3 }
    
gDot1qVlanProtoNewVlanId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Vlan id to be assigned to packet."
        --将要赋予报文的vlan id
    ::= { gDot1qVlanProtoEntry 4 }

gDot1qVlanProtoStatus OBJECT-TYPE
    SYNTAX       INTEGER {
        active(1),
    	createAndGo(2),
    	destroy(3)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "table entry status."
        --表项的状态
    ::= { gDot1qVlanProtoEntry 5 }  
-- -------------------------------------------------------------
-- the current VLAN TRANSLATION Table
-- -------------------------------------------------------------
gDot1qVlanTranslationTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanTransEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to to translate the VLAN ID of an incoming
         tagged packet to another VLAN ID based on the ingress port and
         incoming packet VLAN ID."
        --该表用于基于报文的vlan号和入端口转换报文的vlan id
    ::= { gDot1qExtend 8 }

gDot1qVlanTransEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanTransEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan translation table entry."
        --vlan转换表的表项信息
    INDEX   { gDot1qVlanTransVlanId, gDot1qVlanTransPortId }
    ::= { gDot1qVlanTranslationTable 1 }

GarpDot1qVlanTransEntry ::=
    SEQUENCE {
        gDot1qVlanTransVlanId
            INTEGER,
        gDot1qVlanTransPortId
            INTEGER,
        gDot1qVlanTransNewVlanId
            INTEGER,
        gDot1qVlanTransNewPriority
            INTEGER,
        gDot1qVlanTransStatus
            INTEGER
    }

gDot1qVlanTransVlanId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The first index of vlan translation table entry."
        --vlan转换表项的第一个索引
    ::= { gDot1qVlanTransEntry 1 }

gDot1qVlanTransPortId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The second index of vlan translation table entry."
        --vlan转换表项的第二个索引
    ::= { gDot1qVlanTransEntry 2 }
    
gDot1qVlanTransNewVlanId OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The new vlan id to be assigned to the packet who match
        a vlan translation table entry."
        --转换后的报文的新的vlan id值
    ::= { gDot1qVlanTransEntry 3 }
    
gDot1qVlanTransNewPriority OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The priority field of vlan translation table."
        --VLAN转换表中的报文优先级字段
    ::= { gDot1qVlanTransEntry 4 }
   
gDot1qVlanTransStatus OBJECT-TYPE
    SYNTAX       INTEGER {
        active(1),
    	createAndGo(2),
    	destroy(3)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "table entry status."
        --表项的状态
    ::= { gDot1qVlanTransEntry 5 } 
-- -------------------------------------------------------------
-- gDot1qExtend other
-- -------------------------------------------------------------
gDot1qVlanSubnetPrecede OBJECT-TYPE
    SYNTAX       INTEGER{
         true(1),
         false(2)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to config whether the IP-Subnet Based VLAN has a higher
         precedence than the MAC Based VLAN."
        --用于配置是否基于ip的vlan比基于MAC的vlan具有更高的优先级
    ::= { gDot1qExtend 9 }
    
gDot1qVlanTransEnable OBJECT-TYPE
    SYNTAX       INTEGER{
        true(1),
        false(2)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Used to config current vlan-translation's status."
        --vlan转换的使能开关
    ::= { gDot1qExtend 10 }

-- -------------------------------------------------------------
-- The Stack VLAN Database
-- -------------------------------------------------------------
gDot1qStackVlanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qStackVlanEntry
    MAX-ACCESS  not-accessible  
    STATUS      current 
    DESCRIPTION
         "A table containing stack vlan configuration information for 
         each stack vlan configured into the device by management."
         --该表用于显示和配置Stack VLAN相关的信息.
    ::={ gDot1qExtend 11 }

 gDot1qStackVlanEntry OBJECT-TYPE
    SYNTAX      GarpDot1qStackVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information controlling stack VLAN configuration for a port
        on the device.  This is indexed by port and end vlan id."
        --Stack VLAN表项,以端口号和结束VLAN ID为索引.
	INDEX   { gDot1qStackVlanPort, gDot1qEndStackVlan }
    ::= { gDot1qStackVlanTable 1 }

 GarpDot1qStackVlanEntry ::=
    SEQUENCE {
        gDot1qStackVlanPort
	      INTEGER,
        gDot1qStartStackVlan
	      INTEGER,
        gDot1qEndStackVlan
              INTEGER,
        gDot1qTargetStackVlan
              INTEGER,
        gDot1qStackVlanRowStatus 
              RowStatus
        }

 gDot1qStackVlanPort OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The index of stack vlan."
          --Stack VLAN的索引.
    ::={ gDot1qStackVlanEntry 1 }
    
 gDot1qStartStackVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The start vlan of the serial vlans we want to insert a new vlan tag."
          --Stack VLAN范围的起始VLAN ID.
    ::={ gDot1qStackVlanEntry 2 }
    
 gDot1qEndStackVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The end vlan of the serial vlans we want to insert a new vlan tag."
          --Stack VLAN范围的结束VLAN ID.
    ::={ gDot1qStackVlanEntry 3 } 

 gDot1qTargetStackVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The target vlan of the serial vlans we want to insert."
          --要插入的目标VLAN ID.
    ::={ gDot1qStackVlanEntry 4 } 

 gDot1qStackVlanRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "Describe the oprations for the entry:4-create 6-delete"
           --设置Stack VLAN:4-添加 6-删除.
    ::= { gDot1qStackVlanEntry 5 }

-- -------------------------------------------------------------
-- The  VLAN Passthrough Database
-- -------------------------------------------------------------
gDot1qVlanPassthroughTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanPassthroughEntry
    MAX-ACCESS  not-accessible  
    STATUS      current 
    DESCRIPTION
         "A table containing  vlan passthrough configuration information for 
         each  vlan passthrough configured into the device by management."
         --该表用于显示和配置VLAN透传相关的信息.
    ::={ gDot1qExtend 12 }

 gDot1qVlanPassthroughEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanPassthroughEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information controlling VLAN passthrough configuration for a port
        on the device.  This is indexed by port and end vlan id."
        --VLAN透传表项,以端口号和结束VLAN ID为索引.
	INDEX   { gDot1qPassthroughPort, gDot1qEndPassthroughVlan }
    ::= { gDot1qVlanPassthroughTable 1 }
 
GarpDot1qVlanPassthroughEntry ::=
    SEQUENCE {
        gDot1qPassthroughPort
	      INTEGER,
        gDot1qStartPassthroughVlan
	      INTEGER,
        gDot1qEndPassthroughVlan
              INTEGER,
        gDot1qPassthroughRowStatus 
              RowStatus
        }

 gDot1qPassthroughPort OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The index of passthrough entry."
          --VLAN透传的索引
    ::={ gDot1qVlanPassthroughEntry 1 }
    
 gDot1qStartPassthroughVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The start vlan of the serial vlans we want to passthrough."
          --配置VLAN透传范围的起始VLAN
    ::={ gDot1qVlanPassthroughEntry 2 }
    
 gDot1qEndPassthroughVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4095)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The end vlan of the serial vlans we want to passthrough. "
          --配置VLAN透传范围的结束VLAN
    ::={ gDot1qVlanPassthroughEntry 3 } 

 gDot1qPassthroughRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "Describe the oprations for the entry:4-create 6-delete."
           --设置VLAN透传:4-添加 6-删除.
    ::= { gDot1qVlanPassthroughEntry 4 }
    
-- -------------------------------------------------------------
-- The  VLAN SWAP Database
-- -------------------------------------------------------------
 gDot1qVlanSwapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GarpDot1qVlanSwapEntry
    MAX-ACCESS  not-accessible  
    STATUS      current 
    DESCRIPTION
         "A table containing  vlan swap configuration information for 
         each  vlan swap configured into the device by management."
         --该表用于显示和配置VLAN交换相关的信息.
    ::={ gDot1qExtend 13 }

 gDot1qVlanSwapEntry OBJECT-TYPE
    SYNTAX      GarpDot1qVlanSwapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information controlling VLAN swap configuration for a port
        on the device.  This is indexed by port and end vlan id."
        --VLAN交换表项,以端口号和结束VLAN ID为索引.
	INDEX   { gDot1qVlanSwapPort, gDot1qEndSwapVlan }
    ::= { gDot1qVlanSwapTable 1 }
 
 GarpDot1qVlanSwapEntry ::=
    SEQUENCE {
        gDot1qVlanSwapPort
            INTEGER,
        gDot1qStartSwapVlan
            INTEGER,
        gDot1qEndSwapVlan
            INTEGER,
        gDot1qTargetSwapVlan
            INTEGER,
        gDot1qVlanSwapRowStatus 
            RowStatus
        }

 gDot1qVlanSwapPort OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The index of vlan swap entry."
          --VLAN交换的索引
    ::={ gDot1qVlanSwapEntry 1 }
    
 gDot1qStartSwapVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The start vlan of the serial vlans we want to swap."
          --配置VLAN交换范围的起始VLAN
    ::={ gDot1qVlanSwapEntry 2 }
    
 gDot1qEndSwapVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The end vlan of the serial vlans we want to swap. "
          --配置VLAN交换范围的结束VLAN
    ::={ gDot1qVlanSwapEntry 3 }

 gDot1qTargetSwapVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The target vlan of the serial vlans we want to swap."
          --要交换的目标VLAN ID.
    ::={ gDot1qVlanSwapEntry 4 }
    
 gDot1qVlanSwapRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "Describe the oprations for the entry:4-create 6-delete."
           --设置VLAN交换:4-添加 6-删除.
    ::= { gDot1qVlanSwapEntry 5 }

---在marvell芯片中使用
gDot1qProtocolVlan     OBJECT IDENTIFIER ::= { gDot1qExtend 14 }

gDot1qProtocolVlanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GDot1qProtocolVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip"
        --该表用于基于报文的协议字段为报文进行分类，在marvell芯片中使用
    ::= { gDot1qProtocolVlan 1 }

gDot1qProtocolVlanEntry OBJECT-TYPE
    SYNTAX      GDot1qProtocolVlanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan protocol table entry."
        --基于协议的vlan表的表项
    INDEX   { protocolVlanTableIndex }
    ::= { gDot1qProtocolVlanTable 1 }

GDot1qProtocolVlanEntry ::=
    SEQUENCE {
        protocolVlanTableIndex
            INTEGER,
        protocolVlanTableEthertype
            INTEGER,
        protocolVlanTableProtocol
            INTEGER,
        protocolVlanTableStatus
            RowStatus
    }

protocolVlanTableIndex OBJECT-TYPE
    SYNTAX       INTEGER(0..11)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "index of vlan protocol entry."
        --基于协议的vlan表的索引.
    ::= { gDot1qProtocolVlanEntry 1 }

protocolVlanTableEthertype OBJECT-TYPE
    SYNTAX       INTEGER(0..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "ether type of packet."
        --报文的以太网类型.
    ::= { gDot1qProtocolVlanEntry 2 }
    
protocolVlanTableProtocol OBJECT-TYPE
    SYNTAX       INTEGER{
       ethernetv2(1),
    	non-snap-llc(2),
    	ethernetv2-non-snap-llc(3),
    	snap-llc(4),
    	ethernetv2-snap-llc(5),
    	non-snap-llc-snap-llc(6),
    	ethernetv2-non-snap-llc-snap-llc(7)
    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "protocol of packet.bit 0 is ethernetv2, bit 1 is non-snap-llc, bit 2 is snap-llc."
        --报文的协议类型，位0表示ethernetv2，位1表示non-snap-llc，位2表示snap-llc
    ::= { gDot1qProtocolVlanEntry 3 }
    
protocolVlanTableStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "table entry status."
        --表项的状态
    ::= { gDot1qProtocolVlanEntry 4 }  

gDot1qProtocolVlanActionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GDot1qProtocolVlanActionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to assign a VLAN for a packet based 
         on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip"
        --该表用于基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用
    ::= { gDot1qProtocolVlan 2 }

gDot1qProtocolVlanActionEntry OBJECT-TYPE
    SYNTAX      GDot1qProtocolVlanActionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan protocol aciton table entry."
        --基于协议的vlan动作表的表项
    INDEX   { protocolVlanAcitonTablePort,  protocolVlanTableIndex}
    ::= { gDot1qProtocolVlanActionTable 1 }

GDot1qProtocolVlanActionEntry ::=
    SEQUENCE {
        protocolVlanAcitonTablePort
            INTEGER,
        protocolVlanActionTableNewVlan
            VlanId,
        protocolVlanActionTableStatus
            RowStatus
    }

protocolVlanAcitonTablePort OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "port index."
        --端口索引
    ::= { gDot1qProtocolVlanActionEntry 1 }

protocolVlanActionTableNewVlan OBJECT-TYPE
    SYNTAX       VlanId
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "new vlan id of packet."
        --报文新的VLAN号.
    ::= { gDot1qProtocolVlanActionEntry 2 }
        
protocolVlanActionTableStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "table entry status."
        --表项的状态
    ::= { gDot1qProtocolVlanActionEntry 3 }  

gDot1qProtocolVlanAdminTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GDot1qProtocolVlanAdminEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to enable assign a VLAN for a packet based 
         on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip"
        --该表用于使能基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用
    ::= { gDot1qProtocolVlan 3 }

gDot1qProtocolVlanAdminEntry OBJECT-TYPE
    SYNTAX      GDot1qProtocolVlanAdminEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a vlan protocol admin table entry."
        --使能基于协议的vlan表的表项
    INDEX   { protocolVlanAdminTablePort }
    ::= { gDot1qProtocolVlanAdminTable 1 }

GDot1qProtocolVlanAdminEntry ::=
    SEQUENCE {
        protocolVlanAdminTablePort
            INTEGER,
        protocolVlanAdminTableEnable
            TruthValue,
    }

protocolVlanAdminTablePort OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "port index."
        --端口索引
    ::= { gDot1qProtocolVlanAdminEntry 1 }

protocolVlanAdminTableEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "enable protocol-based vlan function of a port."
        --使能端口的基于协议的VLAN功能.
    ::= { gDot1qProtocolVlanAdminEntry 2 }


gDot1qTranslateVlan     OBJECT IDENTIFIER ::= { gDot1qExtend 15 }

gDot1qTranslateVlanIngressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GDot1qTranslateVlanIngressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip"
        --替换vlan全局表项
    ::= { gDot1qTranslateVlan 1 }   
    
    
gDot1qTranslateVlanIngressEntry OBJECT-TYPE
    SYNTAX      GDot1qTranslateVlanIngressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "entry of ingress vlan translate."
        --入口vlan替换表项
    INDEX   { translateVlanIngressTableIndex }
    ::= { gDot1qTranslateVlanIngressTable 1 }  
    
GDot1qTranslateVlanIngressEntry ::=
    SEQUENCE {
        translateVlanIngressTableIndex
            INTEGER,
	translateIngressTargetVlanID
            INTEGER,
    }
    
translateVlanIngressTableIndex OBJECT-TYPE
    SYNTAX       INTEGER(1..4094)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "index of ingress vlan."
        --入口VLAN 索引.
    ::= { gDot1qTranslateVlanIngressEntry 1 }
    
translateIngressTargetVlanID OBJECT-TYPE
    SYNTAX       INTEGER(0..4094)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Target vlan ID.        
        0 means not set"
        --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同
    ::= { gDot1qTranslateVlanIngressEntry 2 }

gDot1qTranslateVlanEgressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GDot1qTranslateVlanEgressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip"
        --替换vlan全局表项
    ::= { gDot1qTranslateVlan 2 } 
    
gDot1qTranslateVlanEgressEntry OBJECT-TYPE
    SYNTAX      GDot1qTranslateVlanEgressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "entry of Egress vlan translate."
        --出口vlan替换表项
    INDEX   { translateVlanEgressTableIndex }
    ::= { gDot1qTranslateVlanEgressTable 1 }
    
GDot1qTranslateVlanEgressEntry ::=
    SEQUENCE {
        translateVlanEgressTableIndex
            INTEGER,
		translateEgressTargetVlanID
            INTEGER,
    }
translateVlanEgressTableIndex OBJECT-TYPE
    SYNTAX       INTEGER(1..4094)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "index of Egress vlan."
        --出口VLAN 索引.
    ::= { gDot1qTranslateVlanEgressEntry 1 }
    
translateEgressTargetVlanID OBJECT-TYPE
    SYNTAX       INTEGER(0..4094)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Target vlan ID.
        0 means not set"
        --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同
    ::= { gDot1qTranslateVlanEgressEntry 2 }
         
         
         
gDot1qTranslateVlanPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF GDot1qTranslateVlanPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "translate vlan port list"
        --替换vlan端口开启列表
    ::= { gDot1qTranslateVlan 3 }
    
gDot1qTranslateVlanPortEntry OBJECT-TYPE
    SYNTAX      GDot1qTranslateVlanPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "port entry of  vlan translate."
        --vlan替换端口使能表项
    INDEX   { translateVlanTablePort }
    ::= { gDot1qTranslateVlanPortTable 1 }
    
GDot1qTranslateVlanPortEntry ::=
    SEQUENCE {
        translateVlanTablePort
            INTEGER,
		translateTargetVlanIngressTableEnable
            TruthValue,
		translateTargetVlanEgressTableEnable
            TruthValue            
    }    
translateVlanTablePort OBJECT-TYPE
    SYNTAX       INTEGER
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "port index."
        --端口索引
    ::= { gDot1qTranslateVlanPortEntry 1 }
    
translateTargetVlanIngressTableEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "enable ingress Translate vlan function of a port.1:enable;2:disable"
        --使能入端口的VLAN替换功能 1表示使能，2表示禁止.
    ::= { gDot1qTranslateVlanPortEntry 2 }   
    
 translateTargetVlanEgressTableEnable OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "enable Egress Translate vlan function of a port.1:enable;2:disable"
        --使能出端口的VLAN替换功能 1表示使能，2表示禁止.
    ::= { gDot1qTranslateVlanPortEntry 3 }           

            
-- -------------------------------------------------------------
-- GARP MIB - compliance statements
-- -------------------------------------------------------------

garpMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for the GARP module."

    MODULE
        MANDATORY-GROUPS {
            garpMIBBaseGroup
        }
       ::= { garpMIBCompliances 1 }

END