path: root/MIBS/extreme/EXTREME-EAPS-MIB

-- ################################################################################

EXTREME-EAPS-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                MODULE-IDENTITY         FROM SNMPv2-SMI
		OBJECT-TYPE             FROM SNMPv2-SMI
                Unsigned32              FROM SNMPv2-SMI
                TEXTUAL-CONVENTION      FROM SNMPv2-TC
                TruthValue              FROM SNMPv2-TC
                RowStatus               FROM SNMPv2-TC
                DisplayString           FROM RFC1213-MIB
                extremeAgent            FROM EXTREME-BASE-MIB;

    extremeEaps MODULE-IDENTITY
        LAST-UPDATED "0502151530Z"
        ORGANIZATION "Extreme Networks, Inc."
        CONTACT-INFO "www.extremenetworks.com"
        DESCRIPTION "Ethernet Automatic Protection Switching information."  
        ::= { extremeAgent 18 }


    EapsDomainMode
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "Indicates the configured mode of an EAPS domain."
        SYNTAX      INTEGER { invalid (0),
                              master  (1),
                              transit (2)
                            }

    EapsMbrVlanType
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "Indicates the type of vlan, whether it is control or
                     protected vlan, that is being added to the
                     EAPS domain."
        SYNTAX      INTEGER { unassigned (0),
                              control    (1),
                              protected  (2)
                            }

    EapsRingPort
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "This represents an EAPS ring-port."
        SYNTAX      INTEGER (0..2147483647)

    EapsPortType
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "Indicates the ring port of the EAPS domains. The ring port
                     can be primary or secondary. This is used to specify which
                     port is being unconfigured."
        SYNTAX      INTEGER {
                              primary    (1),
                              secondary  (2)
                            }

    EapsDomainState
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational state of an EAPS domain.  
                    The states complete(1), failed(2), init(6), precomplete(7),
                    and preinit(8) apply only to domains configured as master.
                    The states linksup(3), linkdown(4) and preforwarding(5) 
                    apply only to domains configured as transit.  
                    The state init(0) applys to domains configured as either 
                    master or transit."
        SYNTAX      INTEGER { idle          (0),
                              complete      (1),
                              failed        (2),
                              linksup       (3),
                              linkdown      (4),
                              preforwarding (5),
                              init          (6),
                              precomplete   (7),
                              preinit       (8)
                            }

    EapsDomainPortStatus
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational state of an EAPS domain's ring-ports.
                    If the state is unknown (0), it indicates the domain is
                    still not up yet.
                    The valid states are up(1), down(2), blocked(3)."
        SYNTAX      INTEGER { 
                              unknown     (0),
                              up          (1),
                              down        (2),
                              blocked     (3)
                            }

    EapsFailTimerExpiryAction
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The action to take when the failed timer expires.

                     If action is configured to sendAlert(0), and the 
                     fail expires, the Master will remain in Complete or Init
                     state, and a trap - extremeEapsFailTimerExpFlagSet - will 
                     be sent. 
                     When this fail timer stops expiring another trap -
                     extremeEapsFailTimerExpFlagClear - will be sent.

                     If the action is configured to openSecondaryPort(1), and 
                     the fail timer expires, the Master's state will be set to
                     Failed, and it will open the secondary port."
        SYNTAX      INTEGER { sendAlert         (0),
                              openSecondaryPort (1)
                            }

    EapsSharedPortState
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational state of an EAPS Shared-Port instance.  
                    The states are idle(0), ready(1), blocking(2), and
                    preforwarding(3)."
        SYNTAX      INTEGER { idle          (0),
                              ready         (1),
                              blocking      (2),
                              preforwarding (3)
                            }


    EapsSharedPortMode
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "If the mode is unconfigured(0), it indicates the EAPS 
                     shared port's mode has yet to be configured.
                     The valid configured modes of an EAPS Shared-port are
                     controller(1) and partner(2)"
        SYNTAX      INTEGER { 
                              unconfigured  (0),
                              controller    (1),
                              partner       (2)
                            }

    EapsSharedPortSegmentTimerExpiryAction
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The action to take when the EAPS Shared-port's segment 
                     timer expires.

                     If action is configured to sendAlert(0), and the 
                     segment timer expires, the segment's status will remain
                     in Up state, and  a trap -
                     extremeEapsSegmentTimerExpFlagSet - will be sent. 
                     When this segment timer stops expiring another trap -
                     extremeEapsSegmentTimerExpFlagClear - will be sent.

                     If the action is configured to segmentDown(1), and the
                     segment timer expires, the segment's status will be set to
                     Down."
        SYNTAX      INTEGER { sendAlert   (0),
                              segmentDown (1)
                            }

    EapsSharedPortNeighborStatus
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational status of an EAPS Shared-port's neighbor
                    reachabilty.
                    The states are neighborDown(0), neighborUp(1), and
                    neighborError(2)."
        SYNTAX      INTEGER { neighborDown         (0),
                              neighborUp           (1),
                              neighborError        (2)
                            }

    EapsSharedPortRootBlockerStatus
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational status of an EAPS Shared-port's Root- 
                    Blocker.
                    The states are false(0), active(1), and inactive(2)."
        SYNTAX      INTEGER { false         (0),
                              active        (1),
                              inactive      (2)
                            }

    EapsSharedPortSegmentStatus
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational status of an EAPS Shared-port's segments.
                    The states are unknown(0), segUp(1), segDown(2), 
                    segBlockingUp(3) and segBlockingDown(4)."
        SYNTAX      INTEGER { unknown          (0),
                              segUp            (1),
                              segDown          (2),
                              segBlockingUp    (3),
                              segBlockingDown  (4)
                            }

    EapsSharedPortVlanPortStatus
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "The operational status of an EAPS Shared-port's vlan-port.
                    The states are unknown(0), activeOpen(1), blocked(2), 
                    open(3) and down(4)."
        SYNTAX      INTEGER { unknown          (0),
                              activeOpen       (1),
                              blocked          (2),
                              open             (3),
                              down             (4)
                            }

    EapsDomainPriority
    ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "Indicates the configured priority of an EAPS domain."
        SYNTAX      INTEGER { normal (0),
                              high   (1)
                            }

    extremeEapsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF ExtremeEapsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
	        "This table contains EAPS information about all EAPS
                 domains on this device."
        ::= { extremeEaps 1 }


    extremeEapsEntry OBJECT-TYPE
        SYNTAX ExtremeEapsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
                "An individual entry of this table contains EAPS 
                 information related to that EAPS domain."
        INDEX { extremeEapsName }
        ::= { extremeEapsTable 1 }

    ExtremeEapsEntry ::= SEQUENCE {
        extremeEapsName                     DisplayString,
        extremeEapsMode                     EapsDomainMode,
        extremeEapsState                    EapsDomainState,
        extremeEapsFailedFlag               TruthValue,
        extremeEapsEnabled                  TruthValue,
        extremeEapsPrimaryPort              EapsRingPort,
        extremeEapsSecondaryPort            EapsRingPort,
        extremeEapsHelloTimer               INTEGER,
        extremeEapsHelloTimerMs             INTEGER,
        extremeEapsFailedTimer              INTEGER,
        extremeEapsFailedTimerExpiryAction  EapsFailTimerExpiryAction,
        extremeEapsUnconfigRingPort         EapsPortType,
        extremeEapsPrimaryStatus            EapsDomainPortStatus,
        extremeEapsSecondaryStatus          EapsDomainPortStatus,
        extremeEapsProtectedVlansCount      INTEGER,
        extremeEapsPriority                 EapsDomainPriority,
        extremeEapsRowStatus                RowStatus
    }

    extremeEapsName  OBJECT-TYPE
        SYNTAX DisplayString (SIZE(1..32))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
               "The EAPS domain name."
        ::= { extremeEapsEntry 1 }

    extremeEapsMode OBJECT-TYPE
        SYNTAX      EapsDomainMode
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the mode of the EAPS domain."
        ::= { extremeEapsEntry 2 }

    extremeEapsState OBJECT-TYPE
        SYNTAX      EapsDomainState
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the current EAPS state of this EAPS 
                    domain."
        ::= { extremeEapsEntry 3 }

    extremeEapsFailedFlag OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the status of the failed flag.
                    If the failed timer expires while its expiry action is 
                    configured to sendAlert, this failed flag is set.
                    It is then cleared when the failed timer stops expiring, or
                    the expiry action is configured to openSecondaryPort."
        ::= { extremeEapsEntry 4 }

    extremeEapsEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicated if this domain has been enabled or not."
        ::= { extremeEapsEntry 5 }

    extremeEapsPrimaryPort OBJECT-TYPE
        SYNTAX      EapsRingPort
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the EAPS domain's primary ring-port.
                     Value of 0 indicates the primary port is still not 
                     configured"
        ::= { extremeEapsEntry 6 }

    extremeEapsSecondaryPort OBJECT-TYPE
        SYNTAX      EapsRingPort
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the EAPS domain's secondary ring-port.
                     Value of 0 indicates the secondary port is still not
                     configured"
        ::= { extremeEapsEntry 7 }

    extremeEapsHelloTimer OBJECT-TYPE
        SYNTAX      INTEGER (0..15)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the EAPS domain's hello timer's value
                     in seconds."
        ::= { extremeEapsEntry 8 }

    extremeEapsFailedTimer OBJECT-TYPE
        SYNTAX      INTEGER (2..300)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the EAPS domain's failed timer's value
                     in seconds."
        ::= { extremeEapsEntry 9 }

    extremeEapsFailedTimerExpiryAction OBJECT-TYPE
        SYNTAX      EapsFailTimerExpiryAction
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the action taken by the domain when the
                     fail timer expires. 
                     If the action is to sendAlert, then a SNMP trap -
                     extremeEapsFailTimerExpFlagSet - will be sent, and the
                     secondary port will continue to remain in blocking state.
                     If the action is to openSecondaryPort, then the secondary
                     port will open and be set to forwarding state."
        ::= { extremeEapsEntry 10 }

    extremeEapsUnconfigRingPort OBJECT-TYPE
        SYNTAX      EapsPortType
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This specifies which EAPS domain port is being
                     unconfigured.
                     Value of 1, indicates unconfigure the primary port.
                     Value of 2, indicates unconfigure secondary port."
        ::= { extremeEapsEntry 11 }

    extremeEapsPrimaryStatus OBJECT-TYPE
        SYNTAX      EapsDomainPortStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the status of the EAPS domain's primary
                     ring-port."
        ::= { extremeEapsEntry 12 }

    extremeEapsSecondaryStatus OBJECT-TYPE
        SYNTAX      EapsDomainPortStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the status of the EAPS domain's secondary
                     ring-port."
        ::= { extremeEapsEntry 13 }

    extremeEapsProtectedVlansCount OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This gives the count of the number of vlans that are 
                     being protected by this EAPS domain."
        ::= { extremeEapsEntry 14 }

    extremeEapsRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The status of this entry as per standard RowStatus 
                     conventions."
        ::= { extremeEapsEntry 15 }

    extremeEapsHelloTimerMs OBJECT-TYPE
        SYNTAX      INTEGER (100..900)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the milliseconds portion of the EAPS domain's hello timer value
                     in milliseconds."
        ::= { extremeEapsEntry 16 }


    extremeEapsPriority OBJECT-TYPE
        SYNTAX      EapsDomainPriority
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This gives the priority of the domain. Used along with spatial re-use to prioritize
                     handling of domains during a topology change."
        ::= { extremeEapsEntry 17 }

    extremeEapsPrevState OBJECT-TYPE
        SYNTAX      EapsDomainState
        MAX-ACCESS  accessible-for-notify
        STATUS      current
        DESCRIPTION "This indicates the previous EAPS state of this EAPS 
                     domain. Used in state change traps information."
       ::= { extremeEaps 2 }


    extremeEapsGlobalInfo OBJECT IDENTIFIER
        ::= { extremeEaps 3 }
        
    extremeEapsGlobalEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Indicates if EAPS is enabled globally on the switch."
        ::= { extremeEapsGlobalInfo 1 }

    extremeEapsGlobalFastConvergence OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Indicates if Fast Convergence is enabled globally on the 
                     switch."
        ::= { extremeEapsGlobalInfo 2 }

    extremeEapsLastConfigurationChange OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the last time there was any change in 
                     EAPS configuration on the switch."
        ::= { extremeEapsGlobalInfo 3 }


    extremeEapsLastStatusChange OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the last time there was any change in 
                     EAPS domain, EAPS port, shared port, or segment status on
                     the switch.  Time changes for extremeEapsState, 
                     extremeEapsSharedPortState, extremeEapsSharedPortSegmentStatus,
                     extremeEapsFailedFlag, extremeEapsPrimaryStatus, 
                     extremeEapsSecondaryStatus, extremeEapsSharedPortNbrStatus,
	             extremeEapsSharedPortRootBlockerStatus, 
                     extremeEapsSharedPortSegmentFlagFailed."
        ::= { extremeEapsGlobalInfo 4 }

    extremeEapsStatusTrapCount OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the number of status traps sent out since the switch
                     booted.  Status traps counted include
		     extremeEapsSharedPortStateChange
		     extremeEapsRootBlockerStatusChange
		     extremeEapsPortStatusChange
		     extremeEapsStateChange
		     extremeEapsFailTimerExpFlagSet
		     extremeEapsFailTimerExpFlagClear."
        ::= { extremeEapsGlobalInfo 5 }
	
    extremeEapsGlobalMulticastAddRingPorts OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Ring ports are added to existing multicast groups for protected
                     vlans on a topology change event."
      
        ::= { extremeEapsGlobalInfo 6 }

    extremeEapsGlobalMulticastSendIGMPQuery OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "IGMP Query is sent out on all protected vlans on a topology change 
                     event."
        ::= { extremeEapsGlobalInfo 7 }

    extremeEapsGlobalMulticastTempFlooding OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Temporary Multicast flooding occurs on all protected vlans on a 
                     topology change event."
        ::= { extremeEapsGlobalInfo 8 }

    extremeEapsGlobalMulticastTempFloodingDuration OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The duration at which temporary Multicast flooding will occur."
        ::= { extremeEapsGlobalInfo 9 }

    extremeEapsMbrVlanTable OBJECT-TYPE    
        SYNTAX      SEQUENCE OF ExtremeEapsMbrVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains the control and all protected vlans 
                     added to each EAPS domain on this device.
                     There can be only 1 control vlan, while many
                     protected vlans added to a EAPS domain."
        ::= { extremeEaps 4 }

    extremeEapsMbrVlanEntry OBJECT-TYPE
        SYNTAX      ExtremeEapsMbrVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An individual entry of this table correlates a EAPS
                    domain with a VLAN added to it and its type whether it is
                    control or protected."
        INDEX       { extremeEapsName,
                      extremeEapsMbrVlanName,
                      extremeEapsMbrVlanType
                    }
        ::= { extremeEapsMbrVlanTable 1 }

    ExtremeEapsMbrVlanEntry ::= SEQUENCE { 
        extremeEapsMbrVlanName    DisplayString,
        extremeEapsMbrVlanType    EapsMbrVlanType,
        extremeEapsMbrVlanTag     INTEGER,
        extremeEapsMbrVlanRowStatus RowStatus
    }

    extremeEapsMbrVlanName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..32))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The member VLAN's name."
        ::= { extremeEapsMbrVlanEntry 1 }

    extremeEapsMbrVlanType OBJECT-TYPE
        SYNTAX      EapsMbrVlanType
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The member VLAN's type whether it is control or 
                     protected."
        ::= { extremeEapsMbrVlanEntry 2 }

    extremeEapsMbrVlanTag OBJECT-TYPE
        SYNTAX      INTEGER (1..4095)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The member VLAN's Vlan Id tag."
        ::= { extremeEapsMbrVlanEntry 3 }

    extremeEapsMbrVlanRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The status of this entry as per standard RowStatus
                     conventions."
        ::= { extremeEapsMbrVlanEntry 4 }


    extremeEapsSharedPortTable OBJECT-TYPE    
        SYNTAX      SEQUENCE OF ExtremeEapsSharedPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains all EAPS shared ports configured 
                    on this device."
        ::= { extremeEaps 5 }

    extremeEapsSharedPortEntry OBJECT-TYPE
        SYNTAX      ExtremeEapsSharedPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An individual entry of this table describes the 
                    configuration of an EAPS shared port."
        INDEX       { extremeEapsSharedPortIfIndex }
        ::= { extremeEapsSharedPortTable 1 }

    ExtremeEapsSharedPortEntry ::= SEQUENCE { 
        extremeEapsSharedPortIfIndex   EapsRingPort,
        extremeEapsSharedPortMode      EapsSharedPortMode,
        extremeEapsSharedPortLinkId    INTEGER,
        extremeEapsSharedPortSegmentTimerExpiryAction    EapsSharedPortSegmentTimerExpiryAction,
        extremeEapsSharedPortState                       EapsSharedPortState,
        extremeEapsSharedPortNbrStatus                   EapsSharedPortNeighborStatus,
        extremeEapsSharedPortDomainsCount                INTEGER,
        extremeEapsSharedPortProtectedVlansCount         INTEGER,
        extremeEapsSharedPortRootBlockerStatus           EapsSharedPortRootBlockerStatus,
        extremeEapsSharedPortRootBlockerId               INTEGER,
        extremeEapsSharedPortRowStatus                   RowStatus,
        extremeEapsSharedPortSegmentHealthInterval       INTEGER,
        extremeEapsSharedPortSegmentTimeout              INTEGER,	
        extremeEapsSharedPortCommonPathFailedFlag        TruthValue,
        extremeEapsSharedPortCommonPathHealthInterval    INTEGER,
        extremeEapsSharedPortCommonPathTimeout           INTEGER
    }

    extremeEapsSharedPortIfIndex OBJECT-TYPE
        SYNTAX      EapsRingPort
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The ifIndex of a port configured as an EAPS shared port."
        ::= { extremeEapsSharedPortEntry 1 }

    extremeEapsSharedPortMode OBJECT-TYPE
        SYNTAX      EapsSharedPortMode
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The configured mode of the EAPS shared port."
        ::= { extremeEapsSharedPortEntry 2 }

    extremeEapsSharedPortLinkId OBJECT-TYPE
        SYNTAX      INTEGER (0..65534)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The configured Link Id for the EAPS shared port.
                     Each common link in the entire network will be assigned a
                     unique link Id. Each shared-port instance on either end
                     of this common link will be configured with this 
                     link Id.
                     Value of 0 indicates the link Id is still not configured."
        ::= { extremeEapsSharedPortEntry 3 }

    extremeEapsSharedPortSegmentTimerExpiryAction OBJECT-TYPE
        SYNTAX      EapsSharedPortSegmentTimerExpiryAction
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This indicates the action taken by the EAPS Shared port
                     instance when a segment timer expires. 
                     If the action is sendAlert, then when the segment timer
                     expires, an SNMP trap will be sent, and the segment will
                     remain in Up state, with the failed flag set to True.
                     If the action is segmentDown, then when the timer expires,
                     the segment will be set to Down state."
        ::= { extremeEapsSharedPortEntry 4 }

    extremeEapsSharedPortState OBJECT-TYPE
        SYNTAX      EapsSharedPortState
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the state of the EAPS Shared port instance.
                    The states can be idle(0), ready(1), blocking(2), and
                    preforwarding(3)."
        ::= { extremeEapsSharedPortEntry 5 }

    extremeEapsSharedPortNbrStatus OBJECT-TYPE
        SYNTAX      EapsSharedPortNeighborStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This indicates the status of reachabilty to the neighbor
                     on the other end of the Shared-segment. 
                     If the neighbor on the other end is reachable with 
                     matching link-id and different modes, then the status is 
                     NeighborUp.
                     If the neighbor is not reachable, this status is 
                     NeighborDown.
                     If the neighbor is reachable, but with the same mode,
                     then this status is set to Error."
        ::= { extremeEapsSharedPortEntry 6 }

    extremeEapsSharedPortDomainsCount OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This gives the count of the number of EAPS domains that
                     are sharing this shared-port."
        ::= { extremeEapsSharedPortEntry 7 }

    extremeEapsSharedPortProtectedVlansCount OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This gives the count of the number of vlans that are 
                     being protected by this shared-port instance."
        ::= { extremeEapsSharedPortEntry 8 }
                   
    extremeEapsSharedPortRootBlockerStatus OBJECT-TYPE
        SYNTAX      EapsSharedPortRootBlockerStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "If this shared port instance is not in Root blocker state,
                     the status is False.
                     If the shared port is in Root blocker state, and its 
                     path detect message is being returned to it, it is in 
                     Active state.
                     If the shared port is in Root blocker state, but its
                     path detect message is not making it back to itself, then
                     its root blocker status is Inactive."
        ::= { extremeEapsSharedPortEntry 9 }

    extremeEapsSharedPortRootBlockerId OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This is the Link Id of the Root Blocker in the entire
                     network.
                     If there is no root blocker in the network, this value
                     is 65535."
        ::= { extremeEapsSharedPortEntry 10 }

    extremeEapsSharedPortRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The status of this entry as per standard RowStatus 
                     conventions."
        ::= { extremeEapsSharedPortEntry 11 }


    extremeEapsSharedPortSegmentHealthInterval OBJECT-TYPE
        SYNTAX      INTEGER (0..15)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Interval at which health check PDUs are sent out each segment port."
        ::= { extremeEapsSharedPortEntry 12 }


    extremeEapsSharedPortSegmentTimeout OBJECT-TYPE
        SYNTAX      INTEGER (3..30)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION  "Time in seconds where segment fail timer expires, fail flag is set, and
                      expiry action is taken."
        ::= { extremeEapsSharedPortEntry 13 }

    extremeEapsSharedPortCommonPathFailedFlag OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Shared port link fail timer expired, but our shared port link is up."
        ::= { extremeEapsSharedPortEntry 14 }

    extremeEapsSharedPortCommonPathHealthInterval OBJECT-TYPE
        SYNTAX      INTEGER (1..10)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Interval at which health check PDUs are sent out shared port."
        ::= { extremeEapsSharedPortEntry 15 }

    extremeEapsSharedPortCommonPathTimeout OBJECT-TYPE
        SYNTAX      INTEGER (3..30)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION  "Time in seconds where shared link fail timer expires and fail flag is set"
        ::= { extremeEapsSharedPortEntry 16 }





    extremeEapsSharedPortSegmentTable OBJECT-TYPE    
        SYNTAX      SEQUENCE OF ExtremeEapsSharedPortSegmentEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains the EAPS shared port's segments 
                     information"
        ::= { extremeEaps 6 }

    extremeEapsSharedPortSegmentEntry OBJECT-TYPE
        SYNTAX      ExtremeEapsSharedPortSegmentEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An individual entry of this table describes the EAPS
                     shared port's segment information. It will describe the
                     EAPS domain, the segment's status, and other information
                     related to neighboring node's blocking status."
        INDEX       { extremeEapsSharedPortIfIndex,
                      extremeEapsSharedPortSegmentPort,
                      extremeEapsName
                    }
        ::= { extremeEapsSharedPortSegmentTable 1 }

    ExtremeEapsSharedPortSegmentEntry ::= SEQUENCE { 
        extremeEapsSharedPortSegmentPort           EapsRingPort,
        extremeEapsSharedPortSegmentStatus         EapsSharedPortSegmentStatus,
        extremeEapsSharedPortSegmentFailedFlag     TruthValue,
        extremeEapsSharedPortSegmentVlanPortCount  INTEGER,
        extremeEapsSharedPortSegmentAdjId          INTEGER,
        extremeEapsSharedPortSegmentRBD            INTEGER
    }

    extremeEapsSharedPortSegmentPort OBJECT-TYPE
        SYNTAX      EapsRingPort
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The segment port on a segment which is part of an EAPS 
                     shared port."
        ::= { extremeEapsSharedPortSegmentEntry 1 }

    extremeEapsSharedPortSegmentStatus OBJECT-TYPE
        SYNTAX      EapsSharedPortSegmentStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The status of a segment port which is part of an EAPS 
                     shared port."
        ::= { extremeEapsSharedPortSegmentEntry 2 }

    extremeEapsSharedPortSegmentFailedFlag OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The status of the failed flag on a segment port which is 
                     part of an EAPS shared port.
                     This flag will be set to TRUE if the segment's fail timer
                     expiry action is set to sendAlert, and this timer expires"
        ::= { extremeEapsSharedPortSegmentEntry 3 }

    extremeEapsSharedPortSegmentVlanPortCount OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The count of vlan ports being protected under this 
                     segment's EAPS domain."
        ::= { extremeEapsSharedPortSegmentEntry 4 }

    extremeEapsSharedPortSegmentAdjId OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The link Id of a neighboring node if the neighbor's 
                     shared port instance was in blocking state."
        ::= { extremeEapsSharedPortSegmentEntry 5 }

    extremeEapsSharedPortSegmentRBD OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The Root Blocker Id as determined by the neighboring 
                     node's shared port instance."
        ::= { extremeEapsSharedPortSegmentEntry 6 }


    extremeEapsSharedPortVlanTable OBJECT-TYPE    
        SYNTAX      SEQUENCE OF ExtremeEapsSharedPortVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains all VLANs protected by the EAPS 
                     Shared Port instance."
        ::= { extremeEaps 7 }

    extremeEapsSharedPortVlanEntry OBJECT-TYPE
        SYNTAX      ExtremeEapsSharedPortVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An individual entry of this table correlates a EAPS
                    Shared port instance with a VLAN protected by it."
        INDEX       { extremeEapsSharedPortIfIndex,
                      extremeEapsSharedPortVlanName
                    }
        ::= { extremeEapsSharedPortVlanTable 1 }

    ExtremeEapsSharedPortVlanEntry ::= SEQUENCE {
        extremeEapsSharedPortVlanName           DisplayString,
        extremeEapsSharedPortVlanPortCount      INTEGER,
        extremeEapsSharedPortVlanActiveOpenPort EapsRingPort
    }

    extremeEapsSharedPortVlanName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..32))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The vlan being protected under this EAPS Shared port
                     instance"
        ::= { extremeEapsSharedPortVlanEntry 1 }

    extremeEapsSharedPortVlanPortCount OBJECT-TYPE
        SYNTAX      INTEGER (0..65535)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The count of vlan ports being protected under this
                     vlan"
        ::= { extremeEapsSharedPortVlanEntry 2 }

    extremeEapsSharedPortVlanActiveOpenPort OBJECT-TYPE
        SYNTAX      EapsRingPort
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Segment port that is Active Open.
                     If there is no Active open port, then this value is 0."
        ::= { extremeEapsSharedPortVlanEntry 3 }

    extremeEapsSharedPortVlanPortTable OBJECT-TYPE    
        SYNTAX      SEQUENCE OF ExtremeEapsSharedPortVlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains the EAPS shared port's vlan-port's 
                     information"
        ::= { extremeEaps 8 }

    extremeEapsSharedPortVlanPortEntry OBJECT-TYPE
        SYNTAX      ExtremeEapsSharedPortVlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An individual entry of this table describes the EAPS
                     shared port's vlan port information. It will describe the
                     status of the vlan port under its protection."
        INDEX       { extremeEapsSharedPortIfIndex,
                      extremeEapsSharedPortVlanName,
                      extremeEapsSharedPortSegmentPort,
                      extremeEapsName
                    }
        ::= { extremeEapsSharedPortVlanPortTable 1 }

    ExtremeEapsSharedPortVlanPortEntry ::= SEQUENCE { 
        extremeEapsSharedPortVlanPortStatus    EapsSharedPortVlanPortStatus
    }

    extremeEapsSharedPortVlanPortStatus OBJECT-TYPE
        SYNTAX      EapsSharedPortVlanPortStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The status of a vlan port which is getting protected
                     by an EAPS shared port."
        ::= { extremeEapsSharedPortVlanPortEntry 1 }

END