path: root/MIBS/enterasys/CTELS100-NG-MIB

CTELS100-NG-MIB DEFINITIONS ::= BEGIN

    --  ctels100-ng-mib.txt
    --  Revision: 01.03.00
    --  Part Number:
    --  Date: December 15, 1999

    --  Cabletron Systems, Inc.
    --  35 Industrial Way, P.O. Box 5005
    --  Rochester, NH 03867-0505
    --  (603) 332-9400
    --  support@ctron.com

    --  This module provides authoritative definitions for part of the
    --  naming tree below:
    --
    --  cabletron { enterprises 52 }
    --
    --  This module will be extended, as required.
    --
    --  Cabletron Systems reserves the right to make changes in
    --  specification and other information contained in this document
    --  without prior notice.  The reader should consult Cabletron Systems
    --  to determine whether any such changes have been made.
    --
    --  In no event shall Cabletron Systems be liable for any incidental,
    --  indirect, special, or consequential damages whatsoever (including
    --  but not limited to lost profits) arising out of or related to this
    --  document or the information contained in it, even if Cabletron
    --  Systems has been advised of, known, or should have known, the
    --  possibility of such damages.
    --
    --  Cabletron grants vendors, end-users, and other interested parties
    --  a non-exclusive license to use this Specification in connection
    --  with the management of Cabletron products.
    --
    --  Copyright (c)1999 Cabletron Systems
    --
    --  This mib is part of the assigned enterprise MIB tree for Cabletron Systems.
    --  This mib provides management information for the next generation of the 
    --  ELS100 product line (specifically: ELS100-24TX, ELS100-24TXM, and 
    --  ELS100-24TXG), part of the SmartSTACK product line.

          IMPORTS
                     Counter, mgmt, NetworkAddress, enterprises
                             FROM RFC1155-SMI
                     DisplayString
                             FROM RFC1213-MIB
                     OBJECT-TYPE
                             FROM RFC-1212;
          --         TRAP-TYPE
          --                 FROM RFC-1215;

          -- All representations of MAC addresses in this MIB Module
          -- use, as a textual convention (i.e. this convention does
          -- not affect their encoding), the data type:

          -- DisplayString ::= OCTET STRING

          mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }


          cabletron OBJECT IDENTIFIER ::= { enterprises 52 }
          els100  OBJECT IDENTIFIER ::= { cabletron 1011 }

          els100SystemConfig  OBJECT IDENTIFIER ::= { els100 1 }
--        els100PortTable  OBJECT IDENTIFIER ::= { els100 2 }
          els100Switch  OBJECT IDENTIFIER ::= { els100 3 }


          -- System-level configuration information

          els100SysSerialno OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The serial number of the system."
              ::= { els100SystemConfig 1 }

          els100SysTftpIPAddress OBJECT-TYPE
              SYNTAX  NetworkAddress
              ACCESS  read-write
              STATUS mandatory
              DESCRIPTION
                     "The IP address of the TFTP server from which a software
                 download is to be initiated. This variable must be set
                 before a TFTP download can be started with the 
                 els100SysTftpStartDownload variable."
              ::= { els100SystemConfig 2 }

          els100SysTftpFilename OBJECT-TYPE
              SYNTAX  DisplayString (SIZE (0..255))
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The name of the software upgrade file residing on the 
                  TFTP server. Path information must be included in the file
                  name. This variable must be set before a TFTP download can 
                  be started with the els100SysTftpStartDownload variable."
              ::= { els100SystemConfig 3 }

          els100SysPowerupCount OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The total number of times the system has powered up since
                  it was shipped from the factory."
              ::= { els100SystemConfig 4 }

          els100SysBrcastCutoffRate OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The Broadcast Cutoff Rate of the switch allowing for the
                  control of broadcast storms. The value of this variable sets
                  a per second rate. If the broadcast and unknown destination
                  address frames being forwarded through the system surpass this
                  rate, they are dropped. Valid values for this parameter are
                  in the range (100..500000)."
              ::= { els100SystemConfig 5 }

          els100SysGatewayIPAddress OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The IP address of the next hop router (gateway) to which 
                 frames destined for an IP subnet different than what the 
                 system resides are sent."      
              ::= { els100SystemConfig 6 }

          els100SysTftpStartDownload OBJECT-TYPE
              SYNTAX  INTEGER{
                download (1),
                noDownload (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Start a TFTP download. A SET of this variable with the
                  value download (1) initiates a TFTP download to upgrade the
                  system software. The variables els100SysTftpIPAddress and 
                  els100SysTftpFilename must be configured before a download
                  can begin. A GET of this variable will always return the 
                  value noDownload (2)."
              ::= { els100SystemConfig 7 }

          els100SysBootPDhcpEnable OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Enable or disable the operation of the BootP and DHCP
                  protocols on the system. These protocols are used for 
                  automatically configuring the system's IP address 
                  information if a properly configured BootP and/or DHCP
                  server exists on the network."
              ::= { els100SystemConfig 8 }

--      els100SysRmonStatsHistEnable OBJECT-TYPE
--            SYNTAX  INTEGER{
--                disable (1),
--                enable (2)
--              }
--            ACCESS  read-write
--            STATUS  mandatory
--            DESCRIPTION
--                    "Globally enable/disable the operation of the RMON 
--                     Statistics and History Groups on all ports simultaneously."
--            ::= { els100SystemConfig 9 }

          els100SysReset OBJECT-TYPE
              SYNTAX  INTEGER{
                      noReset (1),
                      reset (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Initiate a software reset of the system."
              ::= { els100SystemConfig 10 }

          els100SysSyslogServer OBJECT-TYPE
              SYNTAX  NetworkAddress
              ACCESS  read-write
              STATUS mandatory
              DESCRIPTION
                      "The IP address of the Syslog Server."
              ::= { els100SystemConfig 11 }

          els100SysLowestSyslogSeverity OBJECT-TYPE
              SYNTAX  INTEGER{
                      emergency (0),
                      alert (1),
                      critical (2),
                      error (3),
                      warning (4),
                      notice (5),
                      info (6),
                      debug (7)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The Lowest Syslog Severity Level. All logs with
                       the same or higher severity will be delivered.
                       Note: higher severity has lower number."
              ::= { els100SystemConfig 12 }

          els100SysComPortEnable        OBJECT-TYPE
              SYNTAX    INTEGER {
                            disabled(1),
                            enabled(2)          -- default
           }
              ACCESS    read-write
              STATUS    mandatory
              DESCRIPTION
                      "The administrative state of the Com Port."
              ::= { els100SystemConfig 13 }


          els100SysBoardID      OBJECT-TYPE
              SYNTAX    INTEGER
              ACCESS    read-only
              STATUS    mandatory
              DESCRIPTION
                "The system board ID."
              ::= { els100SystemConfig 14 }

          -- The port table - indexed by port

          els100PortTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF Els100PortEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "The port table."
              ::= { els100 2 }

          els100PortEntry OBJECT-TYPE
              SYNTAX  Els100PortEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "An entry in the port table."
              INDEX   { els100Port }
              ::= { els100PortTable 1 }

          Els100PortEntry ::=
              SEQUENCE {
                  els100Port
                      INTEGER,
                  els100PortStatus
                      INTEGER,
                  els100PortDuplexStatus
                      INTEGER,
                  els100PortForwardedFrames
                      Counter,
                  els100PortRcvdLocalFrames
                      Counter,
                  els100PortName
                      DisplayString,
                  els100PortEnable
                      INTEGER,
                  els100PortSpeed
                      INTEGER,
                  els100PortAutonegEnable
                      INTEGER,
                  els100PortFlowControlEnable
                      INTEGER,
                  els100PortType
                      INTEGER             
                  }

          els100Port OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of the port, from 1 to the number of ports on
                  the system."
              ::= { els100PortEntry 1 }

          els100PortStatus OBJECT-TYPE
              SYNTAX  INTEGER{
                up (1),
                down (2)
                }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The connection (link) status of the port, either up 
                  (linked) or down (not linked)."
              ::= { els100PortEntry 2 }

          els100PortDuplexStatus OBJECT-TYPE
              SYNTAX  INTEGER{
                half (1),
                full (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The duplex status of the port, either half duplex or 
                  full duplex."
              ::= { els100PortEntry 3 }

          els100PortForwardedFrames OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of frames received on the port and forwarded 
                  to another port on the system module for processing."
              ::= { els100PortEntry 4 }

          els100PortRcvdLocalFrames OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of frames received where the destination is 
                  on the port."
              ::= { els100PortEntry 5 }

          els100PortName OBJECT-TYPE
              SYNTAX  DisplayString (SIZE(0..60))
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                       "A descriptive string of up to 60 characters used by the
                  network administrator to name the port."
              ::= { els100PortEntry 6 }

          els100PortEnable OBJECT-TYPE
              SYNTAX  INTEGER {
                    disable (1), 
                    enable (2) 
                    }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                    "The enable status of the port, either enable or disable."
              ::= { els100PortEntry 7 }

          els100PortSpeed OBJECT-TYPE
              SYNTAX  INTEGER {
                    tenMbps (1),
                    oneHundredMbps(2),
                    oneThousandMbps(3) 
                    }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                       "The speed the port is operating at: 10Mbps, or
                       100Mbps, or 1000Mbps."
              ::= { els100PortEntry 8 }

          els100PortAutonegEnable OBJECT-TYPE
              SYNTAX  INTEGER {
                    disable (1), 
                    enable (2) 
                    }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                       "The auto-negotiation status of the port, either enable
                    or disable. When in the enable (2) state, the port will
                    automatically configure its duplex and speed operation."
            ::= { els100PortEntry 9 }

          els100PortFlowControlEnable OBJECT-TYPE
              SYNTAX  INTEGER {
                    disable (1), 
                    enable (2) 
                    }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                    "The state of flow control operation of the port, either 
                    enable or disable."
              ::= { els100PortEntry 10 }

          els100PortType OBJECT-TYPE
              SYNTAX  INTEGER {
                    unknown(1),
                    ieee10BaseT(2),
                    ieee100BaseTx(3),
                    ieee100BaseFx-MM(4),
                    ieee100BaseFx-SM(5),
                    ieee1000BaseCx(6),
                    ieee1000BaseLx(7),
                    ieee1000BaseSx(8),
                    ieee1000BaseT(9),
                    ieee1000BaseX(10)
                    }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                    "Port physical interface type."
              ::= { els100PortEntry 11 }


        -- Switch-level information and configuration

          els100SwitchIPAddress OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                       "The IP address of the system."
              ::= { els100Switch 1 }

          els100SwitchSubnetMask OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The subnet mask associated with the IP address of the system."
              ::= { els100Switch 2 }

          els100ActiveAgingTime OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                       "The aging time of entries in the MAC address forwarding table
                  of the system."
              ::= { els100Switch 3 }

--        els100PurgeAgingTime OBJECT-TYPE
--            SYNTAX  INTEGER
--            ACCESS  read-write
--            STATUS  mandatory
--            DESCRIPTION
--                     "The purge aging time of entries in the MAC address forwarding 
--                  table of the system."
--            ::= { els100Switch 4 }

          els100SwitchSTPStatus OBJECT-TYPE
              SYNTAX  INTEGER{
                on (1),
                off (2)
              }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The Spanning Tree status of the system, enter on or off."
              ::= { els100Switch 5 }
            
          els100SwitchManager OBJECT IDENTIFIER ::= { els100Switch 6 }

          els100SwitchTrapRcvr1 OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The IP address of the first SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 1 }

          els100SwitchTrapCommunity1 OBJECT-TYPE
              SYNTAX DisplayString (SIZE(0..60))
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The community name of the first SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 2 }

          els100SwitchTrapRcvr2 OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The IP address of the second SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 3 }

          els100SwitchTrapCommunity2 OBJECT-TYPE
              SYNTAX DisplayString (SIZE(0..60))
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The community name of the second SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 4 }

          els100SwitchTrapRcvr3 OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The IP address of the third SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 5 }

          els100SwitchTrapCommunity3 OBJECT-TYPE
              SYNTAX DisplayString (SIZE(0..60))
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The community name of the third SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 6 }

          els100SwitchTrapRcvr4 OBJECT-TYPE
              SYNTAX NetworkAddress
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The IP address of the fourth SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 7 }

          els100SwitchTrapCommunity4 OBJECT-TYPE
              SYNTAX DisplayString (SIZE(0..60))
              ACCESS read-write
              STATUS mandatory
              DESCRIPTION
                     "The community name of the fourth SNMP manager to which traps 
                 from the system are directed."
              ::= { els100SwitchManager 8 }

          els100SwitchPortMirroringStatus OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The Port Mirroring status of the system, either disable 
                  or enable."
              ::= { els100Switch 7 }

          els100SwitchMirroredPort OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The port that is being mirrored - the source."
              ::= { els100Switch 8 }

          els100SwitchMirroringPort OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The port that is mirroring - the destination."
              ::= { els100Switch 9 }

          els100SwitchXmitMirrorEnable OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Enable or disable the mirroring of transmitted traffic
                  out the mirrored port to the mirroring port."
              ::= { els100Switch 10 }

          els100SwitchRcvMirrorEnable OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Enable or disable the mirroring of received traffic
                  into the mirrored port to the mirroring port."
              ::= { els100Switch 11 }

          els100SwitchVlanEnable OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
                }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Globally enable or disable the VLAN operation of the
                  system."
              ::= { els100Switch 12 }

        -- Switch Info Vlan table - indexed by VLAN

          els100SwitchVlanConfigTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF Els100SwitchVlanEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                       "The VLAN configuration table."
              ::= { els100Switch 13 }

          els100SwitchVlanEntry OBJECT-TYPE
              SYNTAX  Els100SwitchVlanEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                       "An entry in the VLAN configuration table."
              INDEX   { els100SwitchVlanId }
              ::= { els100SwitchVlanConfigTable 1 }

          Els100SwitchVlanEntry ::=
              SEQUENCE {
                  els100SwitchVlanId
                      INTEGER,
                  els100SwitchVlanName
                      DisplayString,
                  els100SwitchVlanPorts
                      OCTET STRING,
                  els100SwitchVlanEgressPorts
                      OCTET STRING,
                  els100SwitchVlanStatus
                      INTEGER
              }
    
          els100SwitchVlanId OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                       "The number of the VLAN, from 1 to the number of VLAN's
                     supported on the system."
              ::= { els100SwitchVlanEntry 1 }

          els100SwitchVlanName OBJECT-TYPE
              SYNTAX  DisplayString (SIZE(0..60))
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "A descriptive string of up to 60 characters used by the
                     network administrator to name the VLAN."
              ::= { els100SwitchVlanEntry 2 }

          els100SwitchVlanPorts OBJECT-TYPE
              SYNTAX  OCTET STRING
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                       "The set of ports in the VLAN. For systems supporting 
                     tagged VLAN's, these are the ports to which packets 
                     on the VLAN are sent untagged. Each octet within the 
                     value of this object specifies a set of eight ports, 
                     with the first octet specifying ports 1 through 8, the 
                     second octet specifying ports 9 through 16, etc. Within 
                     each octet, the most significant bit represents the 
                     lowest numbered port, and the least significant bit 
                     represents the highest numbered port. Thus each port 
                     of the system is represented by a single bit within the 
                     value of this object. If that bit has a value of '1' 
                     then that port is included in the VLAN; the port is not
                     included if its bit has a value of '0'."
              ::= { els100SwitchVlanEntry 3 }

          els100SwitchVlanEgressPorts OBJECT-TYPE
              SYNTAX  OCTET STRING
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The set of ports defined to be on other VLAN's to which 
                     tagged packets destined for this specific VLAN should 
                     also be sent. Thus, this variable defines ports on the
                     system that reach stations downstream which are on this 
                     VLAN and to which traffic may be forwarded. Each octet 
                     within the value of this object specifies a set of eight 
                     ports, with the first octet specifying ports 1 through 8, 
                     the second octet specifying ports 9 through 16, etc. 
                     Within each octet, the most significant bit represents the 
                     lowest numbered port, and the least significant bit 
                     represents the highest numbered port. Thus each port 
                     of the system is represented by a single bit within the 
                     value of this object. If that bit has a value of '1' 
                     then that port is included in the VLAN; the port is not
                     included if its bit has a value of '0'."
              ::= { els100SwitchVlanEntry 4 }

          els100SwitchVlanStatus OBJECT-TYPE
              SYNTAX  INTEGER{
                  enable (1),
                  disable (2)
              }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                    "Control variable used to enable or disable the operation
                     of the associated VLAN in the system."
              ::= { els100SwitchVlanEntry 5 }

          els100SwitchVlanPortTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF Els100SwitchVlanPortEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                    "The VLAN port configuration table."
              ::= { els100Switch 14 }

          els100SwitchVlanPortEntry OBJECT-TYPE
              SYNTAX  Els100SwitchVlanPortEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "An entry in the VLAN port configuration table."
              INDEX   { els100SwitchVlanPortId }
              ::= { els100SwitchVlanPortTable 1 }

          Els100SwitchVlanPortEntry ::=
              SEQUENCE {
                  els100SwitchVlanPortId
                      INTEGER,
                  els100SwitchVlanPvid
                      INTEGER,
                  els100SwitchVlanPortType
                      INTEGER
              }

          els100SwitchVlanPortId OBJECT-TYPE
              SYNTAX  INTEGER (0..63)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of the port, from 1 to number of ports 
                   in the system."
              ::= { els100SwitchVlanPortEntry 1 }

          els100SwitchVlanPvid OBJECT-TYPE
              SYNTAX  INTEGER (1..4095)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The port's VLAN ID. For tagged VLAN's, this variable
                   defines a 12 bit port VLAN ID (PVID) used as the 
                   identifier of the VLAN in the packet tag."
              ::= { els100SwitchVlanPortEntry 2 }

          els100SwitchVlanPortType OBJECT-TYPE
              SYNTAX  INTEGER{
                hybrid (1),
                access (2)
              }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "For tagged VLAN's, the VLAN port type, either hybrid or 
                   access. Hybrid ports allow both tagged and untagged
                   packets to enter the switch. Access ports only accept
                   untagged packets."
              ::= { els100SwitchVlanPortEntry 3 }

          els100SwitchPriorityEnable OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
              }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Globally enable or disable the Class of Service traffic
                   priority mechanism for the system."
              ::= { els100Switch 15 }

          els100SwitchPriorityThreshold OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                  "The global priority threshold level for the system
                   at which VLAN tagged frames entering the associated
                   port are assigned a high priority. This variable can
                   have a value from (0...7). Traffic with a priority level
                   equal to or above this value are high priority. Traffic
                   with a priority level below this value are normal priority."
              ::= { els100Switch 16 }

          els100SwitchPriorityPortTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF Els100SwitchPriorityPortEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "The priority port table."
              ::= { els100Switch 17 }

          els100SwitchPriorityPortEntry OBJECT-TYPE
              SYNTAX  Els100SwitchPriorityPortEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                     "An entry in the port priority table."
              INDEX   { els100SwitchPriorityPortId }
              ::= { els100SwitchPriorityPortTable 1 }

          Els100SwitchPriorityPortEntry ::=
              SEQUENCE {
                 els100SwitchPriorityPortId
                     INTEGER,
                 els100SwitchPriorityDefault
                     INTEGER
              }

          els100SwitchPriorityPortId OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The port number, from 1 to number of ports in the 
                   system."
              ::= { els100SwitchPriorityPortEntry 1 }

          els100SwitchPriorityDefault OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The port priority level assigned to untagged
                   traffic entering the associated port. This variable
                   can have a value in the range (0...7). This value is
                   compared to the value of the els100SwitchPriorityThreshold 
                   variable to determine if the traffic on the port is
                   high or normal."
              ::= { els100SwitchPriorityPortEntry 2 }


          els100SwitchSpanningTreeStandby OBJECT-TYPE
              SYNTAX  INTEGER{
                disable (1),
                enable (2)
              }
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Globally enable or disable Spanning Tree Standby.
                       If set to disable, every port will instanly enter 
                       forwarding mode after link up"
              ::= { els100Switch 18 }

END