path: root/MIBS/enterasys/CT-CMMPHYS-MIB

CT-CMMPHYS-MIB DEFINITIONS ::= BEGIN

   --  ct-cmmphys-mib.txt
   --  Revision: 01.00.00
   --  Part Number:
   --  Date: December 16, 1998

   --  Cabletron Systems, Inc.
   --  35 Industrial Way, P.O. Box 5005
   --  Rochester, NH 03867-0505
   --  (603) 332-9400
   --  support@ctron.com

   --  This module provides an enterprise-specific CMM container MIB.
   --
   --  This module will be extended, as needed.
   --

   --  Goals and Philosophy
   --
   --  The purpose of this MIB is to provide a central repository of all
   --  information pertaining to the configuration, operation, status,
   --  and health of a CMM board and its CMM modules.  The goal of these
   --  values is to facilitate troubleshooting problems at the level of
   --  a CMM board or CMM module.  The intended audience for this
   --  information includes customers, field engineers, and developers.

   --  Cabletron Systems reserves the right to make changes in
   --  specification and other information contained in this document
   --  without prior notice.  The reader should consult Cabletron Systems
   --  to determine whether any such changes have been made.
   --
   --  In no event shall Cabletron Systems be liable for any incidental,
   --  indirect, special, or consequential damages whatsoever (including
   --  but not limited to lost profits) arising out of or related to this
   --  document or the information contained in it, even if Cabletron
   --  Systems has been advised of, known, or should have known, the
   --  possibility of such damages.
   --
   --  Cabletron grants vendors, end-users, and other interested parties
   --  a non-exclusive license to use this Specification in connection
   --  with the management of Cabletron products.

   --  Copyright December 98 Cabletron Systems

   IMPORTS
      OBJECT-TYPE
         FROM RFC-1212
      DisplayString,ifIndex
         FROM RFC1213-MIB
      IpAddress,Counter,Gauge
         FROM RFC1155-SMI
      ctCMM
         FROM CTRON-MIB-NAMES
      mBusBoardID
         FROM CT-HSIMPHYS-MIB;

   --===============   Group Definitions          ===================

-- This is just a dummy value to get this to compile correctly for now.

   cmmModemInfo   OBJECT IDENTIFIER  ::=  { ctCMM 1 }

   --================================================================

   --  This MIB module uses the extended OBJECT-TYPE macro as defined
   --  RFC 1212

   --================= CMM Board-Level Info ===================
   cmmBoardTable  OBJECT-TYPE
         SYNTAX  SEQUENCE OF CmmBoardEntry
         ACCESS  not-accessible
         STATUS  mandatory
         DESCRIPTION
        "A list of CMM boards present in this unit."
      ::= { cmmModemInfo 1 }

   cmmBoardEntry  OBJECT-TYPE
         SYNTAX  CmmBoardEntry
         ACCESS  not-accessible
         STATUS  mandatory
         DESCRIPTION
        "A CMM board present in this unit."
         INDEX   { mBusBoardID }
      ::= { cmmBoardTable 1 }


   CmmBoardEntry  ::=
         SEQUENCE {
                  cmmBoardType                  OBJECT IDENTIFIER,
                  cmmNumModules                 INTEGER,
                  cmmModuleNumModems            INTEGER,
                  cmmTFTPServer                 IpAddress,
                  cmmUpgradePath                DisplayString,
                  cmmUpgradeFlag                INTEGER,
                  cmmCommitFlag                 INTEGER,
                  cmmModemResetLimit            INTEGER,
                  cmmModemResetTime             INTEGER,
                  cmmOutgoingInactivityTimeout  INTEGER,
                  cmmIncomingInactivityTimeout  INTEGER,
                  cmmAsyncBaseOrigATCmdStr      DisplayString,
                  cmmAsyncBaseAnswerATCmdStr    DisplayString,
                  cmmAsyncOrigStrModifier       DisplayString,
                  cmmAsyncAnswerStrModifier     DisplayString,
                  cmmAsyncOperOrigATCmdStr      DisplayString,
                  cmmAsyncOperAnswerATCmdStr    DisplayString,
                  cmmHdlcBaseOrigATCmdStr       DisplayString,
                  cmmHdlcBaseAnswerATCmdStr     DisplayString,
                  cmmHdlcOrigStrModifier        DisplayString,
                  cmmHdlcAnswerStrModifier      DisplayString,
                  cmmHdlcOperOrigATCmdStr       DisplayString,
                  cmmHdlcOperAnswerATCmdStr     DisplayString,
                  cmmBoardAdminStatus           INTEGER,
                  cmmBoardOperStatus            INTEGER
                  }

   cmmBoardType  OBJECT-TYPE
         SYNTAX  OBJECT IDENTIFIER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object uniquely defines the CMM
         board type - a vendor's authoritative identification
         for a module. By convention, this value is allocated
         within the SMI enterprises subtree(1.3.6.1.4.1), and
         provides an easy and unambiguous means for determining
         the type of board."
      ::= { cmmBoardEntry 1 }

   cmmNumModules  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the number of CMM modules
         contained on this physical CMM circuit board."
      ::= { cmmBoardEntry 2 }

   cmmModuleNumModems  OBJECT-TYPE
         SYNTAX   INTEGER
         ACCESS   read-only
         STATUS   mandatory
         DESCRIPTION
        "Number of modems per CMM module."
      ::= { cmmBoardEntry 3 }

   cmmTFTPServer  OBJECT-TYPE
         SYNTAX  IpAddress
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the IP address of the TFTP
         server where the object code for CMM modules resides.
         This object is persistent."
      ::= { cmmBoardEntry 4 }

   cmmUpgradePath  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the path to the object code
         for CMM modules on the TFTP server.  This object is
         persistent."
      ::= { cmmBoardEntry 5 }

   cmmUpgradeFlag  OBJECT-TYPE
         SYNTAX  INTEGER {
                         true(1),
                         false(2)
                         }
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a flag that indicates whether
         or not to upgrade the software for the CMM modules on the
         board.  This object is persistent."
      ::= { cmmBoardEntry 6 }

   cmmCommitFlag  OBJECT-TYPE
         SYNTAX  INTEGER {
                         true(1),
                         false(2)
                         }
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a flag that indicates whether
         or not to commit the software for the CMM modules on the
         board.  This object is persistent."
      ::= { cmmBoardEntry 7 }

   cmmModemResetLimit  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the number of times that a
         modem can be reset within a given time span before it is
         declared to be faulty.  If the value is 0 then the modem
         will never be declared faulty.  This object is persistent."
      ::= { cmmBoardEntry 8 }

   cmmModemResetTime  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the time span (in minutes)
         during which the given number of resets must occur before
         the modem is declared to be faulty.  This object is
         persistent."
      ::= { cmmBoardEntry 9 }

   cmmOutgoingInactivityTimeout  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the duration (in seconds) of a
         period of inactivity before an outgoing call is terminated.
         This object is persistent."
      ::= { cmmBoardEntry 10 }

   cmmIncomingInactivityTimeout  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the duration (in seconds) of a
         period of inactivity before an incoming call is terminated.
         This object is persistent."
      ::= { cmmBoardEntry 11 }

   cmmAsyncBaseOrigATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the default or base set of AT
         commands to be used when originating an async call."
      ::= { cmmBoardEntry 12 }

   cmmAsyncBaseAnswerATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the default or base set of AT
         commands to be used when answering an async call."
      ::= { cmmBoardEntry 13 }

   cmmAsyncOrigStrModifier  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a set of additional AT commands
         to be used when originating an async call.  This object is
         persistent."
      ::= { cmmBoardEntry 14 }

   cmmAsyncAnswerStrModifier  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a set of additional AT commands
         to be used when answering an async call.  This object is
         persistent."
      ::= { cmmBoardEntry 15 }

   cmmAsyncOperOrigATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the operative set of AT commands
         to be used when originating an async call.  It includes the
         base string, the modifier string, and the call timeout value."
      ::= { cmmBoardEntry 16 }

   cmmAsyncOperAnswerATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the operative set of AT commands
         to be used when answering an async call.  It includes the
         base string, the modifier string, and the call timeout value."
      ::= { cmmBoardEntry 17 }

   cmmHdlcBaseOrigATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the default or base set of AT
         commands to be used when originating an HDLC call."
      ::= { cmmBoardEntry 18 }

   cmmHdlcBaseAnswerATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the default or base set of AT
         commands to be used when answering an HDLC call."
      ::= { cmmBoardEntry 19 }

   cmmHdlcOrigStrModifier  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a set of additional AT commands
         to be used when originating an HDLC call.  This object is
         persistent."
      ::= { cmmBoardEntry 20 }

   cmmHdlcAnswerStrModifier  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a set of additional AT commands
         to be used when answering an HDLC call.  This object is
         persistent."
      ::= { cmmBoardEntry 21 }

   cmmHdlcOperOrigATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the operative set of AT commands
         to be used when originating an HDLC call.  It includes the
         base string, the modifier string, and the call timeout value."
      ::= { cmmBoardEntry 22 }

   cmmHdlcOperAnswerATCmdStr  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the operative set of AT commands
         to be used when answering an HDLC call.  It includes the
         base string, the modifier string, and the call timeout value."
      ::= { cmmBoardEntry 23 }

   cmmBoardAdminStatus  OBJECT-TYPE
         SYNTAX  INTEGER {
                         down(1),
                         leave-service(2),
                         up(3),
                         upgrade(4)
                         }
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the administrative status
         of the CMM board.
         
         down(1) -- all modems that belong to this board are to be
                    removed from service immediately
         leave-service(2) -- each modem that belongs to this board is
                             to be removed from service at the completion
                             of its current call, if any
         up(3) -- each modem that belongs to this module is to become
                  available for accepting calls
         upgrade(4) -- all modules that belong to this board are to be
                       reloaded with new software and restarted"
      ::= { cmmBoardEntry 24 }

   cmmBoardOperStatus  OBJECT-TYPE
         SYNTAX  INTEGER {
                         initializing(1),
                         active(2),
                         leaving-service(3),
                         out-of-service(4),
                         faulty(5),
                         impaired(6)
                         }
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the operational status of
         the CMM board.
         
         initializing(1) -- all modules that belong to this board are booting
                            up or in the process of a software upgrade
         active(2) -- all modules that belong to this board are available
                      for accepting calls
         leaving-service(3) -- all modules that belong to this board are
                               functional but are no longer available for
                               accepting calls  (Existing calls are allowed
                               to terminate normally.)
         out-of-service(4) -- none of the modules that belong to this board
                              are available for accepting calls nor do they
                              have any existing calls
         faulty(5) -- all modules that belong to this board are unusable
         impaired(6) -- the board is otherwise active but one or more
                        modules are in the out-of-service, initializing,
                        testing, faulty, or impaired states"
      ::= { cmmBoardEntry 25 }

   --================= CMM Module-Level Info ===================
   cmmModuleTable  OBJECT-TYPE
         SYNTAX  SEQUENCE OF CmmModuleEntry
         ACCESS  not-accessible
         STATUS  mandatory
         DESCRIPTION
        "A list of CMM modules present on each CMM board in this unit"
      ::= { cmmModemInfo 2 }

   cmmModuleEntry  OBJECT-TYPE
         SYNTAX  CmmModuleEntry
         ACCESS  not-accessible
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is a CMM module that is
         present in this unit"
         INDEX   { mBusBoardID, cmmModuleID }
      ::= { cmmModuleTable 1 }

   CmmModuleEntry  ::=
         SEQUENCE {
                  cmmModuleID           INTEGER,
                  cmmDpramSize          INTEGER,
                  cmmSdramSize          INTEGER,
                  cmmCpuType            INTEGER,
                  cmmCpuSpeed           INTEGER,
                  cmmCpuFwRev           DisplayString,
                  cmmEpldId             DisplayString,
                  cmmEpldRev            DisplayString,
                  cmmNumBadModems       INTEGER,
                  cmmModuleOperStatus   INTEGER,
                  cmmModuleAdminStatus  INTEGER
                  }

   cmmModuleID  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is an index that uniquely identifies
         the CMM module within the physical CMM board."
      ::= { cmmModuleEntry 1 }

   cmmDpramSize  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Size of the DPRAM (in bytes) on the CMM module."
      ::= { cmmModuleEntry 2 }

   cmmSdramSize  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Size of the SDRAM (in bytes) on the CMM module."
      ::= { cmmModuleEntry 3 }

   cmmCpuType  OBJECT-TYPE
         SYNTAX  INTEGER {
                         unknown(1),
                         hitachish3(2),
                         hitachish4(3)
                         }
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "CPU type on the CMM module."
      ::= { cmmModuleEntry 4 }

   cmmCpuSpeed OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The speed of the CPU (in Megahertz) on the CMM module."
      ::= { cmmModuleEntry 5 }

   cmmCpuFwRev  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Revision of the CPU firmware on the CMM module.  This code
         is a product of RSA."
      ::= { cmmModuleEntry 6 }

   cmmEpldId  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "EPLD ID on the CMM module.  (Read from the Altera chip.)"
      ::= { cmmModuleEntry 7 }

   cmmEpldRev  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Revision of the EPLD firmware on the CMM module.  This
         code is produced by Cabletron."
      ::= { cmmModuleEntry 8 }

   cmmNumBadModems OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the number of bad modems
         on the CMM module."
      ::= { cmmModuleEntry 9 }

   cmmModuleAdminStatus  OBJECT-TYPE
         SYNTAX  INTEGER {
                         down(1),
                         leave-service(2),
                         up(3),
                         run-diagnostics(4),
                         reset(5),
                         faulty(6)
                         }
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the administrative status
         of the CMM module.
         
         down(1) -- all modems that belong to this module are to be
                    removed from service immediately
         leave-service(2) -- each modem that belongs to this module is
                             to be removed from service at the completion
                             of its current call, if any
         up(3) -- each modem that belongs to this module is to become
                  available for accepting calls
         run-diagnostics(4) -- all modems that belong to this module are
                               to run a series of comprehensive on-line
                               diagnostic tests
         reset(5) -- the entire module is to be physically reset
         faulty(6) -- the entire module is to be immediately removed from
                      service and considered unusable"
      ::= { cmmModuleEntry 10 }
      
   cmmModuleOperStatus  OBJECT-TYPE
         SYNTAX  INTEGER {
                         initializing(1),
                         active(2),
                         leaving-service(3),
                         out-of-service(4),
                         faulty(5),
                         impaired(6)
                         }
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "The value of this object is the operational status of
         the CMM module.
         
         initializing(1) -- the module is booting up or in the process of
                            a software upgrade
         active(2) -- all modems that belong to this module are available
                      for accepting calls
         leaving-service(3) -- all modems that belong to this module are
                               functional but are no longer available for
                               accepting calls  (Existing calls are allowed
                               to terminate normally.)
         out-of-service(4) -- none of the modems that belong to this module
                              are available for accepting calls nor do they
                              have any existing calls
         faulty(5) -- the module has been removed from service by an NMS and
                      is considered to be unusable
         impaired(6) -- the module is otherwise active but one or more
                        modems are in the out-of-service, initializing,
                        testing, or faulty states"
      ::= { cmmModuleEntry 11 }


   --================= CMM Modem-Level Info ===================
   cmmModemTable OBJECT-TYPE
         SYNTAX      SEQUENCE OF CmmModemEntry
         ACCESS  not-accessible
         STATUS      mandatory
         DESCRIPTION
        "A list of modems present on each CMM module on each CMM board
         in this unit"
      ::= { cmmModemInfo 3 }

   cmmModemEntry OBJECT-TYPE
         SYNTAX      CmmModemEntry
         ACCESS  not-accessible
         STATUS      mandatory
         DESCRIPTION
        "This object contains data for a single CMM modem."
         INDEX   { ifIndex }
      ::= { cmmModemTable 1 }

   CmmModemEntry ::=
         SEQUENCE {
                  cmmBoardID            INTEGER,
                  cmmModemID            INTEGER,
                  cmmIFNum              INTEGER,
                  cmmSessionNum         INTEGER,
                  cmmDdpPartNum         DisplayString,
                  cmmDdpRevLevel        DisplayString,
                  cmmDdpFwRev           DisplayString,
                  cmmDDPInterrupts      Counter,
                  cmmRxFlowCtlEvts      Counter,
                  cmmTxFlowCtlEvts      Counter,
                  cmmCallStatus         INTEGER,
                  cmmCallOrigin         INTEGER,
                  cmmRobbedBitDetected  DisplayString,
                  cmmCorrectionType     INTEGER,
                  cmmCompressionType    INTEGER,
                  cmmRxRate             INTEGER,
                  cmmTxRate             INTEGER,
                  cmmEncoding           INTEGER,
                  cmmFraming            INTEGER,
                  cmmInitialConnectRate INTEGER,
                  cmmMaxHostWindows     INTEGER,
                  cmmMaxCmmWindows      INTEGER,
                  cmmNumOutHostAcks     Gauge,
                  cmmNumOutCmmAcks      Gauge,
                  cmmToNetworkOctets    Counter,
                  cmmFromNetworkOctets  Counter,
                  cmmToHostOctets       Counter,
                  cmmFromHostOctets     Counter,
                  cmmToNetworkFrames    Counter,
                  cmmFromNetworkFrames  Counter,
                  cmmOversizeFrames     Counter,
                  cmmOverrunErrors      Counter,
                  cmmCRCErrors          Counter,
                  cmmAbortedFrames      Counter,
                  cmmRetrainEvents      Counter,
                  cmmARAEvents          Counter,
                  cmmARAFlag            INTEGER,
                  cmmCarrierLossEvents  Counter,
                  cmmCarrierLossFlag    INTEGER,
                  cmmRcvSignalLevel     INTEGER,
                  cmmRcvSignalEQM       INTEGER,
                  cmmTDMSlot            INTEGER,
                  cmmResetModemStats    INTEGER,
                  cmmModemAdminStatus   INTEGER,
                  cmmModemOperStatus    INTEGER 
                  }

   cmmBoardID  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "This object contains the logical number of the CMM board to which
         the modem belongs."
      ::= { cmmModemEntry 1 }

   cmmModemID  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "This object contains the logical number of the modem on the CMM
         module to which the modem belongs."
      ::= { cmmModemEntry 2 }

   cmmIFNum  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "This object contains the number of the instance of the Interface
         MIB that is associated with this modem."
      ::= { cmmModemEntry 3 }

   cmmSessionNum  OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "This object contains the session number that is associated with
         this modem.  Session numbers are assigned, starting with 1, from
         the first modem on the first module of the first CMM board and
         continuing through the last modem of the last module of the last
         CMM board."
      ::= { cmmModemEntry 4 }

   cmmDdpPartNum  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Part number of the DDP controller on the CMM module.
         (Read from the DDP chip.)"
      ::= { cmmModemEntry 5 }

   cmmDdpRevLevel  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Revision level of the DDP controller on the CMM module.
         (Read from the DDP chip.)"
      ::= { cmmModemEntry 6 }

   cmmDdpFwRev  OBJECT-TYPE
         SYNTAX  DisplayString
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "Revison of the DDP controller firmware on the CMM module.
         This code is produced by Rockwell."
      ::= { cmmModemEntry 7 }

   cmmDDPInterrupts OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of interrupts received by the CMM
         transfer manager since initialization."
      ::= { cmmModemEntry 8 }

   cmmRxFlowCtlEvts OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of received flow control events."
      ::= { cmmModemEntry 9 }

   cmmTxFlowCtlEvts OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of transmitted flow control events."
      ::= { cmmModemEntry 10 }

   cmmCallStatus OBJECT-TYPE
         SYNTAX      INTEGER {
                             idle(1),
                             connected(2),
                             retraining(3),
                             dropping(4),
                             local-test(5),
                             remote-test(6)
                             }
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object contains the current call status."
      ::= { cmmModemEntry 11 }

   cmmCallOrigin OBJECT-TYPE
         SYNTAX      INTEGER {
                             answer(1),
                             originate(2)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains an enumerated value that indicates whether
         the call originated locally or remotely."
      ::= { cmmModemEntry 12 }

   cmmRobbedBitDetected OBJECT-TYPE
         SYNTAX      DisplayString
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the robbed bit signalling pattern that was
         detected by the modem or 0 if none."
      ::= { cmmModemEntry 13 }

   cmmCorrectionType OBJECT-TYPE
         SYNTAX      INTEGER {
                             no-ec(1),
                             detection(2),
                             mnp(3),
                             hanging-up(4),
                             speed-matching(5),
                             lapm(6),
                             mnp10(7)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains an enumerated value that indicates the type
         of error correction that was negotiated."
      ::= { cmmModemEntry 14 }
   
   cmmCompressionType OBJECT-TYPE
         SYNTAX      INTEGER {
                             none(1),
                             mnp-class-5(2),
                             v42bis-tx-only(3),
                             v42bis-rx-only(4),
                             v42bis(5)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains an enumerated value that indicates the type
         of data compression that was negotiated."
      ::= { cmmModemEntry 15 }

   cmmRxRate OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the current receive rate."
      ::= { cmmModemEntry 16 }

   cmmTxRate OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the current transmit rate."
      ::= { cmmModemEntry 17 }

   cmmEncoding OBJECT-TYPE
         SYNTAX      INTEGER {
                             u-law(1),
                             a-law(2)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the current PCM encoding type."
      ::= { cmmModemEntry 18 }

   cmmFraming OBJECT-TYPE
         SYNTAX      INTEGER {
                             pseudo-framing(1),
                             hdlc-framing(2),
                             ppp-async(3)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the current framing type."
      ::= { cmmModemEntry 19 }

   cmmInitialConnectRate OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the initial connect rate (in BPS) or the session."
      ::= { cmmModemEntry 20 }

   cmmMaxHostWindows OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the maximum number of host windows."
      ::= { cmmModemEntry 21 }

   cmmMaxCmmWindows OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the maximum number of CMM windows."
      ::= { cmmModemEntry 22 }

   cmmNumOutHostAcks OBJECT-TYPE
         SYNTAX     Gauge 
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of host window acks that
         have not been processed by the CMM side."
      ::= { cmmModemEntry 23 }

   cmmNumOutCmmAcks OBJECT-TYPE
         SYNTAX     Gauge 
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of CMM window acks that
         have not been processed by the host side."
      ::= { cmmModemEntry 24 }

   cmmToNetworkOctets OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of data bytes transmitted
         (modem -> central office switch)."
      ::= { cmmModemEntry 25 }

   cmmFromNetworkOctets OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of data bytes received
         (central office switch -> modem)."
      ::= { cmmModemEntry 26 }

   cmmToHostOctets OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of data bytes transmitted
         (modem -> m-bus host)."
      ::= { cmmModemEntry 27 }

   cmmFromHostOctets OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of data bytes received
         (m-bus host -> modem)."
      ::= { cmmModemEntry 28 }

   cmmToNetworkFrames OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of frames transmitted
         (modem -> central office switch)."
      ::= { cmmModemEntry 29 }

   cmmFromNetworkFrames OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of frames received
         (central office switch -> modem)."
      ::= { cmmModemEntry 30 }

   cmmOversizeFrames OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of HDLC frames received that were
         greater than the maximum permissible size."
      ::= { cmmModemEntry 31 }

   cmmOverrunErrors OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of HDLC overrun errors."
      ::= { cmmModemEntry 32 }

   cmmCRCErrors OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of HDLC CRC errors."
      ::= { cmmModemEntry 33 }

   cmmAbortedFrames OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of HDLC frames that were aborted
         while they were being received."
      ::= { cmmModemEntry 34 }

   cmmRetrainEvents OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of times that retrain and
         renegotiation events have occurred since initialization."
      ::= { cmmModemEntry 35 }

   cmmARAEvents OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of times that automatic
         rate adaption events have occurred."
      ::= { cmmModemEntry 36 }

   cmmARAFlag OBJECT-TYPE
         SYNTAX      INTEGER {
                             true(1),
                             false(2)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains a flag that indicates whether or not
         an ARA event has occurred during the current session."
      ::= { cmmModemEntry 37 }

   cmmCarrierLossEvents OBJECT-TYPE
         SYNTAX      Counter
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of times that carrier loss
         events have occurred."
      ::= { cmmModemEntry 38 }

   cmmCarrierLossFlag OBJECT-TYPE
         SYNTAX      INTEGER {
                             true(1),
                             false(2)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains a flag that indicates whether or not a
         carrier loss event has occurred during the current session."
      ::= { cmmModemEntry 39 }

   cmmRcvSignalLevel OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the receive signal level."
      ::= { cmmModemEntry 40 }

   cmmRcvSignalEQM OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the receive signal EQM."
      ::= { cmmModemEntry 41 }

   cmmTDMSlot OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the number of the TDM slot used by this
         session."
      ::= { cmmModemEntry 42 }

   cmmResetModemStats OBJECT-TYPE
         SYNTAX      INTEGER {
                             true(1),
                             false(2)
                             }
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object is used to reset the statistics pertaining to
         the selected modem.  If written with the value 'true', the
         statistics will be reset.  If written with the value 'false',
         no action will be taken.  Its value will always be read as
         'false'."
      ::= { cmmModemEntry 43 }

   cmmModemAdminStatus OBJECT-TYPE
         SYNTAX      INTEGER {
                             down(1),
                             leave-service(2),
                             up(3),
                             run-diagnostics(4),
                             reset(5),
                             faulty(6)
                             }
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object contains the administrative status of a modem.
         
         down(1) -- the modem is to be removed from service immediately
         leave-service(2) -- the modem is to be removed from service at
                             the completion of its current call, if any
         up(3) -- the modem is to become available for accepting calls
         run-diagnostics(4) -- the modem is to run a series of 
                               comprehensive on-line diagnostic tests
         reset(5) -- the modem is to be physically reset
         faulty(6) -- the modem is to be immediately removed from
                      service and considered unusable"
      ::= { cmmModemEntry 44 }

   cmmModemOperStatus OBJECT-TYPE
         SYNTAX      INTEGER {
                             initializing(1),
                             idle(2),
                             active(3),
                             leaving-service(4),
                             out-of-service(5),
                             testing(6),
                             faulty(7),
                             resetting(8)
                             }
         ACCESS  read-only
         STATUS      mandatory
         DESCRIPTION
        "This object contains the operational status of a modem.
        
         initializing(1) -- the module to which the modem belongs is booting
                            up or in the process of a software upgrade
         idle(2) -- the modem is available for accepting calls but has no
                    call in place
         active(3) -- the modem is not available for accepting calls because
                      it already has one in place
         leaving-service(4) -- the modem is functional but is no longer
                               available for accepting calls  (Existing calls
                               are allowed to terminate normally.)
         out-of-service(5) -- the modem is neither available for accepting
                              calls nor does it have a call in place
         testing(6) -- the modem is running a series of comprehensive on-line
                       diagnostic tests
         faulty(7) -- the modem has been removed from service by an NMS or
                      due to a hardware or software failure and is considered
                      to be unusable
         resetting(8) -- the modem is executing a reset sequence"
      ::= { cmmModemEntry 45 }

   --================= Free-Form AT Command Group ===================

   cmmFreeFormAtCmdGroup OBJECT IDENTIFIER ::= { cmmModemInfo 5 }

   cmmATCommand  OBJECT-TYPE
         SYNTAX  OCTET STRING
         ACCESS  read-write
         STATUS  mandatory
         DESCRIPTION
        "This object contains the user-defined AT command string.  It
         can contain up to 256 characters, including a carriage return
         that will automatically be inserted and a NULL terminator."
      ::= { cmmFreeFormAtCmdGroup 1 }

   cmmSelectedModem OBJECT-TYPE
         SYNTAX      INTEGER
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object contains the ID of the modem to which the free-form
         AT command string should be sent."
      ::= { cmmFreeFormAtCmdGroup 2 }

   cmmATCmdStatus OBJECT-TYPE
         SYNTAX      INTEGER {
                             sending(1),
                             not-sending(2)
                             }
         ACCESS  read-write
         STATUS      mandatory
         DESCRIPTION
        "This object allows the free-form AT command string to be sent
         and allows the status of the command string to be examined."
      ::= { cmmFreeFormAtCmdGroup 3 }

   cmmATCmdResult  OBJECT-TYPE
         SYNTAX  DisplayString (SIZE (0..255))
         ACCESS  read-only
         STATUS  mandatory
         DESCRIPTION
        "This object contains the result string from issuing the
         free-form AT command ."
      ::= { cmmFreeFormAtCmdGroup 4 }

END