path: root/MIBS/emerson/EES-POWER-FERRO-MIB

------------------------------------------------------------
-- Emerson Energy Systems (EES)
-- Power MIB
------------------------------------------------------------

EES-POWER-FERRO-MIB DEFINITIONS ::= BEGIN


IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
	Integer32, Counter32, enterprises
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION, DisplayString, DateAndTime
		FROM SNMPv2-TC;
		
		
powerMIB MODULE-IDENTITY
	LAST-UPDATED "201401060857Z"
	ORGANIZATION "
		Emerson Energy Systems (EES)"
	CONTACT-INFO "
		Emerson Energy Systems
		141 82 Stockholm
		Sweden"
	DESCRIPTION "
		Emerson Energy Systems (EES) Power MIB, For SMDUH."
	::= { enterprises 6302 2 1 }

------------------------------------------------------------
-- Node definitions
------------------------------------------------------------

ees OBJECT IDENTIFIER ::= { enterprises 6302 }

global OBJECT IDENTIFIER ::= { ees 2 }

------------------------------------------------------------
-- Textual conventions
------------------------------------------------------------

Status ::= TEXTUAL-CONVENTION
	STATUS current
	DESCRIPTION "
		This integer value represents the operational or administrative
		status of the system. Also used as alarm severity.
		Depending on situation there may be limits on allowed values.
		Operational values:
		(1) unknown - status has not yet been defined
		(2) normal - there are no activated alarms
		(3) warning - OA, lowest level of 'abnormal' status
		(4) minor - A3
		(5) major - MA
		(6) critical - CA, highest level of 'abnormal' status
		Administrative values:
		(7) unmanaged
		(8) restricted
		(9) testing
		(10) disabled"
	SYNTAX INTEGER {
		unknown(1),
		normal(2),
		warning(3),
		minor(4),
		major(5),
		critical(6),
		unmanaged(7),
		restricted(8),
		testing(9),
		disabled(10) }

StatusChange ::= TEXTUAL-CONVENTION
	STATUS current
	DESCRIPTION "
		Indicates 'activated' (1) or 'deactivated' (2) alarm events."
	SYNTAX INTEGER {
		activated(1),
		deactivated(2) }


------------------------------------------------------------
-- 1.1 Identification of the plant { powerMIB 1 }
------------------------------------------------------------

ident OBJECT IDENTIFIER ::= { powerMIB 1 }

identManufacturer OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The name of the equipment manufacturer."
	::= { ident 1 }

identModel OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The manufacturers model designation of the power system."
	::= { ident 2 }

identControllerFirmwareVersion OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The firmware (software) version of the controller."
	::= { ident 3 }

identName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION "
		The name of the power plant. This object should be set by
		the administrator."
	::= { ident 4 }

identSNMPCfgVer OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The name of the power plant. This object should be set by
		the administrator."
	::= { ident 5 }
	
------------------------------------------------------------
-- 1.2 System values { powerMIB 2 }
------------------------------------------------------------

system OBJECT IDENTIFIER ::= { powerMIB 2 }

systemStatus OBJECT-TYPE
	SYNTAX Status
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Status of the complete plant (highest alarm). One of
		(1) unknown - status has not yet been defined
		(2) normal - there are no activated alarms
		(3) warning - OA, lowest level of 'abnormal' status
		(4) minor - A3
		(5) major - MA
		(6) critical - CA, highest level of 'abnormal' status
		(7) unmanaged
		(8) restricted
		(9) testing
		(10) disabled"
	::= { system 1 }

systemVoltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		System voltage, stored as mV, including positive or negative
		sign. The integer 2147483647 represents invalid value."
	::= { system 2 }

systemCurrent OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		System current, stored as mA, including positive or negative
		sign. The integer 2147483647 represents invalid value."
	::= { system 3 }

systemUsedCapacity OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Used capacity, stored as % of the total capacity.
		The integer 2147483647 represents invalid value."
	::= { system 4 }



-- ------------------------------------------------------------------------ 
-- 1.2.5. Battery group
-- ------------------------------------------------------------------------ 

psBattery OBJECT IDENTIFIER ::= { system 5 }

    psBatteryVoltage OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Battery voltage, stored as mV, including positive or negative
		sign. The integer 2147483647 represents invalid value."
        ::= { psBattery 1 }
    
    psTotalBatteryCurrent OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Battery current, stored as mA, including positive or negative
		sign. The integer 2147483647 represents invalid value."
        ::= { psBattery 2 }

	psBatteryCapacity OBJECT-TYPE
		SYNTAX Integer32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION "
			Calculated capacity, stored as % of the total capacity.
			The integer 2147483647 represents invalid value."
		::= { psBattery 3 }

	psBatteryNominalCapacity OBJECT-TYPE
		SYNTAX Integer32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION "
			nominal installed capacity, stored as mAh.
			The integer 2147483647 represents invalid value."
		::= { psBattery 4 }

    psBatteryTable OBJECT-TYPE
        SYNTAX SEQUENCE OF PSBatteryEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION     
                "Battery Table."
    ::= { psBattery 5 }
    
    psBatteryEntry OBJECT-TYPE
        SYNTAX PSBatteryEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Battery Measurement Table Entry."
        INDEX { psBatteryIndex }
    ::= { psBatteryTable 1 }

    PSBatteryEntry ::= SEQUENCE {
        psBatteryIndex              Integer32,
        psBatteryCurrent         	Integer32,
        psBatteryName		  		DisplayString
    }

    psBatteryIndex OBJECT-TYPE
        SYNTAX		  Integer32(1..16777215)
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Automatically generated index object."
    ::= { psBatteryEntry 1 }

    psBatteryCurrent OBJECT-TYPE
        SYNTAX 		  Integer32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Battery current in Amps."
    ::= { psBatteryEntry 2 }

    psBatteryName OBJECT-TYPE
        SYNTAX 		  DisplayString
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Battery shunt name."
    ::= { psBatteryEntry 3 }


-- ------------------------------------------------------------------------ 
-- 1.2.6. the psInput group
-- ------------------------------------------------------------------------ 

psInput OBJECT IDENTIFIER ::= { system 6 }

    psInputLineAVoltage OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The AC line A voltage, stored as mV. The integer 2147483647 
		represents invalid value."
        ::= { psInput 1 }

    psInputLineBVoltage OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The AC line B voltage, stored as mV. The integer 2147483647 
		represents invalid value."
        ::= { psInput 2 }

    psInputLineCVoltage OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The AC line C voltage, stored as mV. The integer 2147483647 
		represents invalid value."
        ::= { psInput 3 }

-- ------------------------------------------------------------------------ 
-- 1.2.7. the temperatures
-- ------------------------------------------------------------------------ 

psTemperature OBJECT IDENTIFIER ::= { system 7 }

    psTemperature1 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first route temperature, stored as 0.001 Celsius degree. 
		The integer 2147483647 represents invalid value."
        ::= { psTemperature 1 }

    psTemperature2 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second route temperature, stored as 0.001 Celsius degree. 
		The integer 2147483647 represents invalid value.."
        ::= { psTemperature 2 }


    psTemperatureTable OBJECT-TYPE
        SYNTAX SEQUENCE OF PSTemperatureEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION     
                "Temperature Measurement Table."
    ::= { psTemperature 3 }
    
    psTemperatureEntry OBJECT-TYPE
        SYNTAX PSTemperatureEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Temperature Measurement Table Entry."
        INDEX { psTemperatureIndex }
    ::= { psTemperatureTable 1 }

    PSTemperatureEntry ::= SEQUENCE {
        psTemperatureIndex               Integer32,
        psTemperatureMeasurement         Integer32,
        psTemperatureName                DisplayString,
        psTemperatureType                INTEGER,	
        psTemperatureAlarmStatus         INTEGER
    }

    psTemperatureIndex OBJECT-TYPE
        SYNTAX Integer32(1..71)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "Temperature Probe Number "
    ::= { psTemperatureEntry 1 }

    psTemperatureMeasurement OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "Temperature Value In Centigrade."
    ::= { psTemperatureEntry 2 }

    psTemperatureName OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "Configured Temperature Probe Name."
    ::= { psTemperatureEntry 3 }

    psTemperatureType OBJECT-TYPE
        SYNTAX INTEGER { 
        none(0), 
        ambient(1), 
        battery(2) 
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "Temperature Probe Type "
    ::= { psTemperatureEntry 4 }

    psTemperatureAlarmStatus OBJECT-TYPE
        SYNTAX INTEGER { 
        high(0), 
        low(1), 
        fail(2), 
        none(3) 
        }
        MAX-ACCESS                  read-only
        STATUS                  current
        DESCRIPTION
                "Temperature Probe Alarm Status "
    ::= { psTemperatureEntry 5 }

psStatusCommunication OBJECT-TYPE
        SYNTAX INTEGER {
            unknown(1),
            normal(2),
            interrupt(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The status of communication with the Power System. interrupt(3) indicates
             some errors occurred between Power System and agent."
        ::= { system 8 }

psStatusBatteryMode OBJECT-TYPE
        SYNTAX INTEGER  {
	    unknown(1),
	    floatCharging(2),
	    shortTest(3),
	    bcForTest(4),
	    manualTesting(5),
	    planTesting(6),
	    acFailTesting(7),
	    acFail(8),
	    manualBC(9),
	    autoBC(10),
	    cyclicBC(11),
	    masterBC(12),
	    masterBT(13)
	}
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The status of battery modes, 
		FloatCharging(2),
		ShortTest(3),
		BoostChargingForTest(4),
		ManualTesting(5),
		PlanTesting(6),
		ACFailTesting(7),
		ACFail(8),
		ManualBoostCharging(9),
		AutoBoostCharging(10),
		CyclicBoostCharging(11),
		MasterBoostCharging(12),
		MasterBateryTesting(13)."
        ::= { system 9 }

-- ------------------------------------------------------------------------ 
-- 1.2.10. the SM series group(only get number of SM series)
-- ------------------------------------------------------------------------ 

psSMNumber OBJECT IDENTIFIER ::= { system 10 }

    psSMACNumber OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The number of SM AC module."
        ::= { psSMNumber 1 }

    psSMBATNumber OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The number of SM BAT module."
        ::= { psSMNumber 2 }

    psSMIONumber OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The number of SM IO module."
        ::= { psSMNumber 3 }

-- ------------------------------------------------------------------------ 
-- 1.2.11. Rectifier group
-- ------------------------------------------------------------------------ 

psRectifier OBJECT IDENTIFIER ::= { system 11 }

numberOfInstalledRectifiers OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		number of rectifiers, stored as integer.
		The integer 2147483647 represents invalid value."
	::= { psRectifier 1 }

numberOfRectifiersCommunicating OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		number of rectifiers communicating, stored as integer.
		The integer 2147483647 represents invalid value."
	::= { psRectifier 2 }

rectifiersUsedCapacity OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Used capacity, stored as % of the total capacity.
		The integer 2147483647 represents invalid value."
	::= { psRectifier 3 }

psRectifierTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PSRectifierEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table holding information about indivual rectifiers."
	::= { psRectifier 4 }

psRectifierEntry OBJECT-TYPE
	SYNTAX PSRectifierEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the rectifierInfoTable."
	INDEX { psRectifierIndex }
	::= { psRectifierTable 1 }

PSRectifierEntry ::= SEQUENCE {
	psRectifierIndex Integer32,
	psRectifierProductNumber DisplayString,
	psRectifierHWVersion DisplayString,
	psRectifierSWVersion DisplayString,
	psRectifierSerialNumber DisplayString,
	psRectifierCurrent Integer32,
	psRectifierIdent DisplayString,
	psRectifierFail StatusChange
	}

psRectifierIndex OBJECT-TYPE
  SYNTAX Integer32(1..16777215)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION "Automatically generated index object."
::= { psRectifierEntry 1 }

psRectifierProductNumber OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Rectifier Product Number."
::= { psRectifierEntry 2}

psRectifierHWVersion OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Rectifier Hardware Revision."
::= { psRectifierEntry 3}

psRectifierSWVersion OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Rectifier Software Revision."
::= { psRectifierEntry 4}

psRectifierSerialNumber OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Rectifier Serial Number."
::= { psRectifierEntry 5}

psRectifierCurrent OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Rectifier Current."
::= { psRectifierEntry 6}

psRectifierIdent OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Rectifier physical location identifier."
::= { psRectifierEntry 7}

psRectifierFail OBJECT-TYPE
        SYNTAX StatusChange
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "
	The type of alarm change. One of
	(1) activated
	(2) deactivated"
::= { psRectifierEntry 8}

-- ------------------------------------------------------------------------ 
-- 1.2.12. the Distribution
-- ------------------------------------------------------------------------ 

psDistribution OBJECT IDENTIFIER ::= { system 12 }

psTotalLoadCurrent OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Total Load current, stored as integer.
		The integer 2147483647 represents invalid value."
	::= { psDistribution 1 }
    psDistributionLoadTable OBJECT-TYPE
        SYNTAX SEQUENCE OF PSDistributionLoadEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION     
                "Distribution Table."
    ::= { psDistribution 2 }
    
    psDistributionLoadEntry OBJECT-TYPE
        SYNTAX PSDistributionLoadEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Distribution Measurement Table Entry."
        INDEX { psDistributionLoadIndex }
    ::= { psDistributionLoadTable 1 }

    PSDistributionLoadEntry ::= SEQUENCE {
        psDistributionLoadIndex               Integer32,
        psDistributionLoadCurrent         	  Integer32,
        psDistributionLoadName		  DisplayString	
    }

    psDistributionLoadIndex OBJECT-TYPE
        SYNTAX		  Integer32(1..268386303)
        MAX-ACCESS              not-accessible
        STATUS                  current
        DESCRIPTION
                "Automatically generated index object."
    ::= { psDistributionLoadEntry 1 }

    psDistributionLoadCurrent OBJECT-TYPE
        SYNTAX 		  Integer32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Distribution current in Amps."
    ::= { psDistributionLoadEntry 2 }

    psDistributionLoadName OBJECT-TYPE
        SYNTAX 		  DisplayString
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Distribution name."
    ::= { psDistributionLoadEntry 3 }

    psDistributionGeneralTable OBJECT-TYPE
        SYNTAX SEQUENCE OF PSDistributionGeneralEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION     
                "Distribution Table."
    ::= { psDistribution 3 }
    
    psDistributionGeneralEntry OBJECT-TYPE
        SYNTAX PSDistributionGeneralEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Distribution Measurement Table Entry."
        INDEX { psDistributionGeneralIndex }
    ::= { psDistributionGeneralTable 1 }

    PSDistributionGeneralEntry ::= SEQUENCE {
        psDistributionGeneralIndex               Integer32,
        psDistributionGeneralCurrent         	  Integer32,
        psDistributionGeneralName		  DisplayString	
    }

    psDistributionGeneralIndex OBJECT-TYPE
        SYNTAX		  Integer32(1..268386303)
        MAX-ACCESS              not-accessible
        STATUS                  current
        DESCRIPTION
                "Automatically generated index object."
    ::= { psDistributionGeneralEntry 1 }

    psDistributionGeneralCurrent OBJECT-TYPE
        SYNTAX 		  Integer32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Distribution current in Amps."
    ::= { psDistributionGeneralEntry 2 }

    psDistributionGeneralName OBJECT-TYPE
        SYNTAX 		  DisplayString
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
                "Distribution name."
    ::= { psDistributionGeneralEntry 3 }

-- ------------------------------------------------------------------------ 
-- 1.2.13. Converter group
-- ------------------------------------------------------------------------ 

psConverter OBJECT IDENTIFIER ::= { system 13 }

numberOfInstalledConverters OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		number of converters, stored as integer.
		The integer 2147483647 represents invalid value."
	::= { psConverter 1 }

numberOfConvertersCommunicating OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		number of converters communicating, stored as integer.
		The integer 2147483647 represents invalid value."
	::= { psConverter 2 }

convertersUsedCapacity OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Used capacity, stored as % of the total capacity.
		The integer 2147483647 represents invalid value."
	::= { psConverter 3 }

psConverterVoltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Converter voltage in mV.
		The integer 2147483647 represents invalid value."
	::= { psConverter 4 }

psTotalConverterCurrent OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Total Converter current in Amps.
		The integer 2147483647 represents invalid value."
	::= { psConverter 5 }

psConverterTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PSConverterEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table holding information about indivual converters."
	::= { psConverter 6 }

psConverterEntry OBJECT-TYPE
	SYNTAX PSConverterEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the ConverterInfoTable."
	INDEX { psConverterIndex }
	::= { psConverterTable 1 }

PSConverterEntry ::= SEQUENCE {
	psConverterIndex Integer32,
	psConverterProductNumber DisplayString,
	psConverterHWVersion DisplayString,
	psConverterSWVersion DisplayString,
	psConverterSerialNumber DisplayString,
	psConverterCurrent Integer32,
          psConverterIdent DisplayString,
          psConverterFail StatusChange	}

psConverterIndex OBJECT-TYPE
  SYNTAX Integer32(1..100)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION "Automatically generated index object."
::= { psConverterEntry 1 }

psConverterProductNumber OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Converter Product Number."
::= { psConverterEntry 2}

psConverterHWVersion OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Converter Hardware Revision."
::= { psConverterEntry 3}

psConverterSWVersion OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Converter Software Revision."
::= { psConverterEntry 4}

psConverterSerialNumber OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Converter Serial Number."
::= { psConverterEntry 5}

psConverterCurrent OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Converter Current."
::= { psConverterEntry 6}

psConverterIdent OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Converter physical location identifier."
::= { psConverterEntry 7}

psConverterFail OBJECT-TYPE
        SYNTAX StatusChange
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "
	The type of alarm change. One of
	(1) activated
	(2) deactivated"
::= { psConverterEntry 8}

-- ------------------------------------------------------------------------ 
-- 1.2.14. Control group
-- ------------------------------------------------------------------------ 

psControl OBJECT IDENTIFIER ::= { system 14 }

controlBatteryTest OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION "
		Control battery test, start(1), stop (0)."
	::= { psControl 1 }

controlRelay8 OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION "
		Control relay8, close(1), open(0)."
	::= { psControl 2 }

controlRelay7 OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION "
		Control relay7, close(1), open(0)."
	::= { psControl 3 }

controlRelay6 OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION "
		Control relay6, close(1), open(0)."
	::= { psControl 4 }

controlRelayTest OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION "
		Control Relay test, start(1), stop (0)."
	::= { psControl 5 }


-- ------------------------------------------------------------------------ 
-- 1.2.15. EquipmentSignalTable
-- ------------------------------------------------------------------------ 

psEquipmentSignalTable OBJECT-TYPE
	SYNTAX SEQUENCE OF EquipmentSignalTableEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table of indexed equipment signal values."
	::= { system 15 }

equipmentSignalTableEntry OBJECT-TYPE
	SYNTAX EquipmentSignalTableEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the psEquipment Signal Table."
	INDEX { psEquipmentSignalTableEntryIndex }
	::= { psEquipmentSignalTable 1 }

EquipmentSignalTableEntry ::= SEQUENCE {
	psEquipmentSignalTableEntryIndex Integer32,
	psEquipmentSignalValue Integer32 }

psEquipmentSignalTableEntryIndex OBJECT-TYPE
	SYNTAX Integer32(1..268386303)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The unique sequence number of this equipment signal."
	::= { equipmentSignalTableEntry 1 }

psEquipmentSignalValue OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Indexed equipment signal value."
	::= { equipmentSignalTableEntry 2 }

-- ------------------------------------------------------------------------ 
-- 1.2.16. SMDUHCurrentTable
-- ------------------------------------------------------------------------ 

psSMDUHCurrent OBJECT IDENTIFIER ::= { system 16 }

numberOfInstalledSMDUH OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		number of SMDHU units, stored as integer.
		The integer 2147483647 represents invalid value."
	::= { psSMDUHCurrent 1 }

psSMDUH1Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH1 Voltage."
	::= { psSMDUHCurrent 2 }

psSMDUH2Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH2 Voltage."
	::= { psSMDUHCurrent 3 }

psSMDUH3Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH3 Voltage."
	::= { psSMDUHCurrent 4 }

psSMDUH4Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH4 Voltage."
	::= { psSMDUHCurrent 5 }

psSMDUH5Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH5 Voltage."
	::= { psSMDUHCurrent 6 }

psSMDUH6Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH6 Voltage."
	::= { psSMDUHCurrent 7 }

psSMDUH7Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDUH7 Voltage."
	::= { psSMDUHCurrent 8 }

psSMDUH8Voltage OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		SMDU8 Voltage."
	::= { psSMDUHCurrent 9 }

psSMDUHCurrentTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PSSMDUHEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table holding information about SMDUH currents."
	::= { psSMDUHCurrent 10 }

psSMDUHCurrentEntry OBJECT-TYPE
	SYNTAX PSSMDUHEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the SMDUHTable."
	INDEX { psSMDUHCurrentIndex }
	::= { psSMDUHCurrentTable 1 }

psSMDUHCurrentEntry ::= SEQUENCE {
	psSMDUHCurrentIndex Integer32,
	psSMDUHCurrent1 Integer32,
	psSMDUHCurrent2 Integer32,
	psSMDUHCurrent3 Integer32,
	psSMDUHCurrent4 Integer32,
	psSMDUHCurrent5 Integer32,
	psSMDUHCurrent6 Integer32,
	psSMDUHCurrent7 Integer32,
	psSMDUHCurrent8 Integer32,
	psSMDUHCurrent9 Integer32,
	psSMDUHCurrent10 Integer32,
	psSMDUHCurrent11 Integer32,
	psSMDUHCurrent12 Integer32,
	psSMDUHCurrent13 Integer32,
	psSMDUHCurrent14 Integer32,
	psSMDUHCurrent15 Integer32,
	psSMDUHCurrent16 Integer32,
	psSMDUHCurrent17 Integer32,
	psSMDUHCurrent18 Integer32,
	psSMDUHCurrent19 Integer32,
	psSMDUHCurrent20 Integer32 }

psSMDUHCurrentIndex OBJECT-TYPE
  SYNTAX Integer32(1..64)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION "Automatically generated index object."
::= { psSMDUHCurrentEntry 1 }

psSMDUHCurrent1 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 1."
::= { psSMDUHCurrentEntry 2}

psSMDUHCurrent2 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 2."
::= { psSMDUHCurrentEntry 3}

psSMDUHCurrent3 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 3."
::= { psSMDUHCurrentEntry 4}

psSMDUHCurrent4 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 4."
::= { psSMDUHCurrentEntry 5}

psSMDUHCurrent5 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 5."
::= { psSMDUHCurrentEntry 6}

psSMDUHCurrent6 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 6."
::= { psSMDUHCurrentEntry 7}

psSMDUHCurrent7 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 7."
::= { psSMDUHCurrentEntry 8}

psSMDUHCurrent8 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 8."
::= { psSMDUHCurrentEntry 9}

psSMDUHCurrent9 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 9."
::= { psSMDUHCurrentEntry 10}

psSMDUHCurrent10 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 10."
::= { psSMDUHCurrentEntry 11}

psSMDUHCurrent11 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 11."
::= { psSMDUHCurrentEntry 12}

psSMDUHCurrent12 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 12."
::= { psSMDUHCurrentEntry 13}

psSMDUHCurrent13 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 13."
::= { psSMDUHCurrentEntry 14}

psSMDUHCurrent14 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 14."
::= { psSMDUHCurrentEntry 15}

psSMDUHCurrent15 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 15."
::= { psSMDUHCurrentEntry 16}

psSMDUHCurrent16 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 16."
::= { psSMDUHCurrentEntry 17}

psSMDUHCurrent17 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 17."
::= { psSMDUHCurrentEntry 18}

psSMDUHCurrent18 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 18."
::= { psSMDUHCurrentEntry 19}

psSMDUHCurrent19 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 19."
::= { psSMDUHCurrentEntry 20}

psSMDUHCurrent20 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Current 20."
::= { psSMDUHCurrentEntry 21}

-- ------------------------------------------------------------------------ 
-- 1.2.17. SMDUHPowerTable
-- ------------------------------------------------------------------------ 

psSMDUHPower OBJECT IDENTIFIER ::= { system 17 }

psSMDUHPowerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PSSMDUHEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table holding information about SMDUH power."
	::= { psSMDUHPower 1 }

psSMDUHPowerEntry OBJECT-TYPE
	SYNTAX PSSMDUHEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the SMDUHPowerTable."
	INDEX { psSMDUHPowerIndex }
	::= { psSMDUHPowerTable 1 }

psSMDUHPowerEntry ::= SEQUENCE {
	psSMDUHPowerIndex Integer32,
	psSMDUHPower1 Integer32,
	psSMDUHPower2 Integer32,
	psSMDUHPower3 Integer32,
	psSMDUHPower4 Integer32,
	psSMDUHPower5 Integer32,
	psSMDUHPower6 Integer32,
	psSMDUHPower7 Integer32,
	psSMDUHPower8 Integer32,
	psSMDUHPower9 Integer32,
	psSMDUHPower10 Integer32,
	psSMDUHPower11 Integer32,
	psSMDUHPower12 Integer32,
	psSMDUHPower13 Integer32,
	psSMDUHPower14 Integer32,
	psSMDUHPower15 Integer32,
	psSMDUHPower16 Integer32,
	psSMDUHPower17 Integer32,
	psSMDUHPower18 Integer32,
	psSMDUHPower19 Integer32,
	psSMDUHPower20 Integer32 }

psSMDUHPowerIndex OBJECT-TYPE
  SYNTAX Integer32(1..64)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION "Automatically generated index object."
::= { psSMDUHPowerEntry 1 }

psSMDUHPower1 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 1."
::= { psSMDUHPowerEntry 2}

psSMDUHPower2 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 2."
::= { psSMDUHPowerEntry 3}

psSMDUHPower3 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 3."
::= { psSMDUHPowerEntry 4}

psSMDUHPower4 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 4."
::= { psSMDUHPowerEntry 5}

psSMDUHPower5 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 5."
::= { psSMDUHPowerEntry 6}

psSMDUHPower6 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 6."
::= { psSMDUHPowerEntry 7}

psSMDUHPower7 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 7."
::= { psSMDUHPowerEntry 8}

psSMDUHPower8 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 8."
::= { psSMDUHPowerEntry 9}

psSMDUHPower9 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 9."
::= { psSMDUHPowerEntry 10}

psSMDUHPower10 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 10."
::= { psSMDUHPowerEntry 11}

psSMDUHPower11 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 11."
::= { psSMDUHPowerEntry 12}

psSMDUHPower12 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 12."
::= { psSMDUHPowerEntry 13}

psSMDUHPower13 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 13."
::= { psSMDUHPowerEntry 14}

psSMDUHPower14 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 14."
::= { psSMDUHPowerEntry 15}

psSMDUHPower15 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 15."
::= { psSMDUHPowerEntry 16}

psSMDUHPower16 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 16."
::= { psSMDUHPowerEntry 17}

psSMDUHPower17 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 17."
::= { psSMDUHPowerEntry 18}

psSMDUHPower18 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 18."
::= { psSMDUHPowerEntry 19}

psSMDUHPower19 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 19."
::= { psSMDUHPowerEntry 20}

psSMDUHPower20 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Power 20."
::= { psSMDUHPowerEntry 21}

-- ------------------------------------------------------------------------ 
-- 1.2.18. SMDUHEnergyTable
-- ------------------------------------------------------------------------ 

psSMDUHEnergy OBJECT IDENTIFIER ::= { system 18 }

psSMDUHEnergyTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PSSMDUHEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table holding information about SMDUH energy counters."
	::= { psSMDUHEnergy 1 }

psSMDUHEnergyEntry OBJECT-TYPE
	SYNTAX PSSMDUHEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the SMDUHEnergyTable."
	INDEX { psSMDUHEnergyIndex }
	::= { psSMDUHEnergyTable 1 }

psSMDUHEnergyEntry ::= SEQUENCE {
	psSMDUHEnergyIndex Integer32,
	psSMDUHTotalEnergy1 Integer32,
	psSMDUHTotalEnergy2 Integer32,
	psSMDUHTotalEnergy3 Integer32,
	psSMDUHTotalEnergy4 Integer32,
	psSMDUHTotalEnergy5 Integer32,
	psSMDUHTotalEnergy6 Integer32,
	psSMDUHTotalEnergy7 Integer32,
	psSMDUHTotalEnergy8 Integer32,
	psSMDUHTotalEnergy9 Integer32,
	psSMDUHTotalEnergy10 Integer32,
	psSMDUHTotalEnergy11 Integer32,
	psSMDUHTotalEnergy12 Integer32,
	psSMDUHTotalEnergy13 Integer32,
	psSMDUHTotalEnergy14 Integer32,
	psSMDUHTotalEnergy15 Integer32,
	psSMDUHTotalEnergy16 Integer32,
	psSMDUHTotalEnergy17 Integer32,
	psSMDUHTotalEnergy18 Integer32,
	psSMDUHTotalEnergy19 Integer32,
	psSMDUHTotalEnergy20 Integer32 }

psSMDUHEnergyIndex OBJECT-TYPE
  SYNTAX Integer32(1..64)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION "Automatically generated index object."
::= { psSMDUHEnergyEntry 1 }

psSMDUHTotalEnergy1 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 1."
::= { psSMDUHEnergyEntry 2}

psSMDUHTotalEnergy2 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 2."
::= { psSMDUHEnergyEntry 3}

psSMDUHTotalEnergy3 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 3."
::= { psSMDUHEnergyEntry 4}

psSMDUHTotalEnergy4 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 4."
::= { psSMDUHEnergyEntry 5}

psSMDUHTotalEnergy5 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 5."
::= { psSMDUHEnergyEntry 6}

psSMDUHTotalEnergy6 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 6."
::= { psSMDUHEnergyEntry 7}

psSMDUHTotalEnergy7 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 7."
::= { psSMDUHEnergyEntry 8}

psSMDUHTotalEnergy8 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 8."
::= { psSMDUHEnergyEntry 9}

psSMDUHTotalEnergy9 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 9."
::= { psSMDUHEnergyEntry 10}

psSMDUHTotalEnergy10 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 10."
::= { psSMDUHEnergyEntry 11}

psSMDUHTotalEnergy11 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 11."
::= { psSMDUHEnergyEntry 12}

psSMDUHTotalEnergy12 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 12."
::= { psSMDUHEnergyEntry 13}

psSMDUHTotalEnergy13 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 13."
::= { psSMDUHEnergyEntry 14}

psSMDUHTotalEnergy14 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 14."
::= { psSMDUHEnergyEntry 15}

psSMDUHTotalEnergy15 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 15."
::= { psSMDUHEnergyEntry 16}

psSMDUHTotalEnergy16 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 16."
::= { psSMDUHEnergyEntry 17}

psSMDUHTotalEnergy17 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 17."
::= { psSMDUHEnergyEntry 18}

psSMDUHTotalEnergy18 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 18."
::= { psSMDUHEnergyEntry 19}

psSMDUHTotalEnergy19 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 19."
::= { psSMDUHEnergyEntry 20}

psSMDUHTotalEnergy20 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "SMDUH Total Energy 20."
::= { psSMDUHEnergyEntry 21}


------------------------------------------------------------
-- Alarm trap counter { powerMIB 3 }
------------------------------------------------------------

alarmLastTrapNo OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The sequence number of last submitted alarm trap,
		also last row in alarmTrapTable."
	::= { powerMIB 3 }

------------------------------------------------------------
-- Active Alarm table { powerMIB 4 }
------------------------------------------------------------

alarmActiveAlarmTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ActiveAlarmEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		Table holding information about the currently active alarms."
	::= { powerMIB 4 }

activeAlarmEntry OBJECT-TYPE
	SYNTAX ActiveAlarmEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "
		An entry (conceptual row) in the alarmTrapTable."
	INDEX { alarmIndex }
	::= { alarmActiveAlarmTable 1 }

ActiveAlarmEntry ::= SEQUENCE {
	alarmIndex Counter32,
	alarmTime DateAndTime,
	alarmStatusChange StatusChange,
	alarmSeverity Status,
	alarmDescription DisplayString,
	alarmType Integer32 }

alarmIndex OBJECT-TYPE
	SYNTAX Counter32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The unique sequence number of this alarm trap."
	::= { activeAlarmEntry 1 }

alarmTime OBJECT-TYPE
	SYNTAX DateAndTime
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Date and time when event occured (local time), including
		timezone if supported by controller."
	::= { activeAlarmEntry 2 }

alarmStatusChange OBJECT-TYPE
	SYNTAX StatusChange
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The type of alarm change. One of
		(1) activated
		(2) deactivated"
	::= { activeAlarmEntry 3 }

alarmSeverity OBJECT-TYPE
	SYNTAX Status
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		The severity of the alarm. One of
		(3) warning - OA, lowest level of alarm severity
		(4) minor - A3
		(5) major - MA
		(6) critical - CA, highest level of alarm severity"
	::= { activeAlarmEntry 4 }

alarmDescription OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Free-text description of alarm."
	::= { activeAlarmEntry 5 }

alarmType OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "
		Alarm type, i.e. an integer specifying the type of alarm."
	::= { activeAlarmEntry 6 }

------------------------------------------------------------
-- Events/traps { powerMIB 5 }
------------------------------------------------------------

powerEvents OBJECT IDENTIFIER ::= { powerMIB 5 }

alarmTrap NOTIFICATION-TYPE
	OBJECTS {
		alarmIndex,
		alarmTime,
		alarmStatusChange,
		alarmSeverity,
		alarmDescription,
		alarmType }
	STATUS current
	DESCRIPTION "
		An alarm trap is sent when an alarm occurs (activated) or
		returns to normal state (deactivated). Alarm traps are logged
		in alarmTrapTable. Variables in this trap:
		* alarmIndex - The unique sequence number of this alarm trap.
		* alarmTime - Date and time when event occured (local time),
		      including timezone if supported by controller.
		* alarmStatusChange - (1) activated or (2) deactivated.
		* alarmSeverity - Integer describing the severity of the alarm.
		* alarmDescription - Free-text description of alarm.
		* alarmType - Integer indicating type of alarm."
	::= { powerEvents 1 }

alarmActiveTrap NOTIFICATION-TYPE
	OBJECTS {
		alarmTime,
		alarmSeverity,
		alarmDescription,
		alarmType }
	STATUS current
	DESCRIPTION "
		An alarm trap is sent when an alarm occurs (activated)
		Variables in this trap
		* alarmTime - Date and time when event occured (local time),
		      including timezone if supported by controller.
		* alarmSeverity - Integer describing the severity of the alarm.
		* alarmDescription - Free-text description of alarm.
		* alarmType - Integer indicating type of alarm."
	::= { powerEvents 2 }

alarmCeaseTrap NOTIFICATION-TYPE
	OBJECTS {
		alarmTime,
		alarmSeverity,
		alarmDescription,
		alarmType }
	STATUS current
	DESCRIPTION "
		An alarm trap is sent when an alarm returns to normal state (clear, deactivated). 
                Variables in this trap:
		* alarmTime - Date and time when event occured (local time),
		      including timezone if supported by controller.
		* alarmSeverity - Integer describing the severity of the alarm.
		* alarmDescription - Free-text description of alarm.
		* alarmType - Integer indicating type of alarm."
	::= { powerEvents 3 }

------------------------------------------------------------
-- End of MIB definitions
------------------------------------------------------------

END