path: root/MIBS/ekinops/EKINOPS-MGNT2-MIB

-- *****************************************************************
-- MGNT2.TXT:  MIB
--
--MIB Part Number:3MI01002CABA
--MIB Version:01
--
-- Copyright (c) 2017 by Ekinops
-- All rights reserved.
-- 
-- *****************************************************************

EKINOPS-MGNT2-MIB DEFINITIONS ::= BEGIN

IMPORTS
	ekinops,
	EkiState,
	EkiOnOff,
	EkiProtocol,
	EkiApiState,
	EkiLoadGWSW,
	EkiLoadState,
	EkiLoadPermutMethod,
	EkiSynchroMode,
	EkiLoadPermutMode	 
			FROM EKINOPS-MIB
        MODULE-IDENTITY,
        OBJECT-TYPE,
        NOTIFICATION-TYPE,
	Unsigned32,
	Integer32,
	IpAddress                
        		FROM SNMPv2-SMI
 	TEXTUAL-CONVENTION,
	DisplayString,
	RowStatus
                FROM SNMPv2-TC;

mgnt2 MODULE-IDENTITY
        LAST-UPDATED "201701100000Z"
        ORGANIZATION "Ekinops"
        CONTACT-INFO
         "Ekinops

          3, rue Blaise Pascal
          F-22300 Lannion / FRANCE

          Tel : +33 (0)2 96 05 00 30
          Fax : +33 (0)2 96 48 62 39

          E-mail: support@ekinops.net"
        DESCRIPTION
          "MIB for Ekinops 360 management."
	REVISION "200511240000Z"
	DESCRIPTION
	  "Initial version."
	REVISION "200601240000Z"
	DESCRIPTION
	  "Add the ekicraft package table."
	REVISION "200603100000Z"
	DESCRIPTION
	  "Change Rack full to Rack Not Full"
	REVISION "200605100000Z"
	DESCRIPTION
	  "Gateways are managed by a table"
	REVISION "200605230000Z"
	DESCRIPTION
	  "Replace PBU by PM"
	REVISION "200609280000Z"
	DESCRIPTION
	  "CRAFT/LINUX Inventory Insertion"
	REVISION "200612130000Z"
	DESCRIPTION
	  "Plug-in inventory table insertion"
        REVISION "200702090000Z"
	DESCRIPTION
	  "Add Backpanel ,Fan inventory and error counters"
        REVISION "200704240000Z"
	DESCRIPTION
	  "Add detailed traps"
        REVISION "200706190000Z"
	DESCRIPTION
	  "Add ABS3 objects"
        REVISION "200708270000Z"
	DESCRIPTION
	  "Add Groups number in board table for pm1008dc"
        REVISION "200711270000Z"
	DESCRIPTION
	  "Update Ekinops Address,Helps on objects,Add Dcc management"
        REVISION "200805200000Z"
	DESCRIPTION
	  "Add syslog and ntp servers ip addresses"
        REVISION "200806180000Z"
	DESCRIPTION
	  "Add Inactivity Time out"
        REVISION "200808180000Z"
	DESCRIPTION
	  "Add Cli access, create a textual convention for DCC access.Add Craft Access"
	REVISION "200810070000Z"
	DESCRIPTION
	  "Invert code on DCC mode"
	REVISION "200811190000Z"
	DESCRIPTION
	  "Insert Chassis Ethernet Split"
	REVISION "200901050000Z"
	DESCRIPTION
	  "Insert Chassis Global Conf"
	REVISION "200912150000Z"
	DESCRIPTION
	  "Correction on traps"
	REVISION "201001040000Z"
	DESCRIPTION
	  "Insert CRIT/URG/NURG/Acknowledge"
	REVISION "201002160000Z"
	DESCRIPTION
	  "Add CondType and NMS parameters"
	REVISION "201007160000Z"
	DESCRIPTION
	  "Add perf management for the NMS"
	REVISION "201010270000Z"
	DESCRIPTION
	  "Add new filters for traps"

	REVISION "201103170000Z"
	DESCRIPTION
	  "Add new filters for traps"
	REVISION "201104070000Z"
	DESCRIPTION
	  "New mode on new ehternet input"
	REVISION "201104130000Z"
	DESCRIPTION
	  "Polling Manager fail insertion"
	REVISION "201105270000Z"
	DESCRIPTION
	  "Rajout AlarmType sur Extraction Fan"
	REVISION "201106080000Z"
	DESCRIPTION
	  "Rajout Cold Reset"
	REVISION "201106300000Z"
	DESCRIPTION
	  "PerfCapStatus new type"
	REVISION "201109120000Z"
	DESCRIPTION
	  "New data for Atom"
	REVISION "201202080000Z"
	DESCRIPTION
	  "PM labelling removal"
	REVISION "201203190000Z"
	DESCRIPTION
	  "Add mgnt2SubFunctionLabel for 100G"
	REVISION "201207160000Z"
	DESCRIPTION
	  "Minor cosmetic updates"
	REVISION "201305280000Z"
	DESCRIPTION
	  "RSTP configuration object"
	REVISION "201305300000Z"
	DESCRIPTION
	  "Dust filter insertion, CPU Temp warning"
	REVISION "201308290000Z"
	DESCRIPTION
	  "LLDP configuration object"
	REVISION "201309040000Z"
	DESCRIPTION
	  "MGNT Shutdown adding"
	REVISION "201309110000Z"
	DESCRIPTION
	  "Log file mode insertion"
	REVISION "201311060000Z"
	DESCRIPTION
	  "RADIUS objects"
	REVISION "201407300000Z"
	DESCRIPTION
	  "Node Controller objects"
	REVISION "201409010000Z"
	DESCRIPTION
	  "Probcause,AlarmType - NMS completion"
	REVISION "201502110000Z"
	DESCRIPTION
	  "HTTP configuration"
	REVISION "201504010000Z"
	DESCRIPTION
	  "Add bindings for Node Controller"
	REVISION "201504140000Z"
	DESCRIPTION
	  "RSTP Thresholds"
	REVISION "201504140000Z"
	DESCRIPTION
	  "Users privilege"
	REVISION "201510090000Z"
	DESCRIPTION
	  "Add in mgnt2SlotStatus"
	REVISION "201511050000Z"
	DESCRIPTION
	  "Appropriate Limits on SYNTAX of some OBJECT-TYPE "
	REVISION "201605270000Z"
	DESCRIPTION
	  "Add objects for fail login attemps"
	REVISION "201606150000Z"
	DESCRIPTION
	  "Removable Fan modules handling"
	REVISION "201610120000Z"
	DESCRIPTION
	  "Modification of numbering of the fans"
	REVISION "201701100000Z"
	DESCRIPTION
	  "FTP, TFTP enable disable"
        ::= { ekinops 7 }

--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
---     TEXTUAL-CONVENTION
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************

Mgnt2CliAccessValues ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different type of access by ethernet for the CLI"
    SYNTAX INTEGER {
		noCliByEthernet(0),
		cliBySSH(1),
		cliByTelnet(2)
           }

Mgnt2CraftAccessValues ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "enables access to the CRAFT"
    SYNTAX INTEGER {
		noCraftAccess(0),
		craftEnable(1),
		craftEnableHttps(2)
           }

Mgnt2DccAccessValues ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the Dcc access"
    SYNTAX INTEGER {
		mode1Slots2s4s6s8s10(0),
		mode2Slots2s6s10s14s18(1)
    }

Mgnt2TrapModeValues ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the trap generation"
    SYNTAX INTEGER {
		syntheticTrap(0),
		detailedTrap(1),
		nmsTrap(2)
    }

Mgnt2AckMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes to acknowledge alarms"
    SYNTAX INTEGER {
		modeA(1),
		modeB(2)
    }

Mgnt2PerfResyncValues ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the trap generation"
    SYNTAX INTEGER {
		perfResyncIdle(1),
		perfResyncSync(2),
		perfResyncReady(3),
		perfResyncDelete(4)
    }
 
Mgnt2NetMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the network management"
    SYNTAX INTEGER {
		switch(1),
		gateway(2)
    }

Mgnt2MasterEthMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the Master"
    SYNTAX INTEGER {
		static(1),
		dhcp(2)
    }

Mgnt2SubnetEthMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the Subnet"
    SYNTAX INTEGER {
		static(1),
		dhcp(2)
    }

Mgnt2AuthTypeValues ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "Various types of authentication processes"
    SYNTAX INTEGER {
		authLocal(0),
		authRADIUS(1),
		authLDAP(2)
    }

Mgnt2LogFileMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "different modes for the log files"
    SYNTAX INTEGER {
		disabled (0),
		linear(1),
		rotary(2)
    }


Mgnt2SlotStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "Status of the slot"
    SYNTAX INTEGER {
		slotEmpty(0),
		pmReady(1),
		pmReset(2),
		pmLoad(3),
		pmPassive(4),
		pmUnknown(5),
		pmNotReady(6)
    }




   
-- *****************************************************************
--
-- MGNT2 MIB root mapping
--
-- *****************************************************************
mgnt2SNMPAgentData OBJECT IDENTIFIER ::= { mgnt2 1 }
mgnt2Hardware OBJECT IDENTIFIER ::= { mgnt2 2}
mgnt2Traps OBJECT IDENTIFIER ::= { mgnt2 3}
mgnt2SoftwareManagement OBJECT IDENTIFIER ::= { mgnt2 4}
mgnt2ConfigManagement OBJECT IDENTIFIER ::= { mgnt2 5}
mgnt2RemoteInventory OBJECT IDENTIFIER ::= { mgnt2 6}
mgnt2ErrorCounters OBJECT IDENTIFIER ::= { mgnt2 7}
mgnt2Perf OBJECT IDENTIFIER ::= { mgnt2 8}

-- *****************************************************************
--
-- MGNT2 SNMP Agent informations
--
-- *****************************************************************

mgnt2IPmanagment OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 1 }


mgnt2GigmManagerIpAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Mgnt2GigmManagerIpAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
	"Manager IP address Table."
    ::= { mgnt2IPmanagment 1 }

mgnt2GigmManagerIpAddressEntry OBJECT-TYPE
    SYNTAX      Mgnt2GigmManagerIpAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
	""
    INDEX   { mgnt2GigmManagerIpIndex }
    ::= { mgnt2GigmManagerIpAddressTable 1 }

Mgnt2GigmManagerIpAddressEntry ::= SEQUENCE {
    mgnt2GigmManagerIpIndex         Integer32,
    mgnt2GigmManagerIpAddress	   IpAddress,
    mgnt2GigmManagerIpAddressTableRowStatus    RowStatus,
    mgnt2GigmManagerTrapPort	   Integer32,
    mgnt2GigmManagerEnableCtrl     EkiOnOff,
    mgnt2GigmManagerEnableConfig   EkiOnOff,
    mgnt2GigmManagerEnableEvent    EkiOnOff,
    mgnt2GigmManagerEnableAlarmCrit EkiOnOff,
    mgnt2GigmManagerEnableAlarmMajor EkiOnOff,
    mgnt2GigmManagerEnableAlarmMinor EkiOnOff,
    mgnt2GigmManagerRegistrationTimeout Integer32,
    mgnt2GigmManagerEnableAlarmWarning EkiOnOff,
    mgnt2GigmManagerEnableAlarmIndeterminate EkiOnOff
}

mgnt2GigmManagerIpIndex OBJECT-TYPE
  SYNTAX Integer32(1..32)
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Index of the IP address of the manager"
  ::= { mgnt2GigmManagerIpAddressEntry 1 }
  
mgnt2GigmManagerIpAddress OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "IP address of the manager:This OID defines the IP
         address of the SNMP Manager attached to the Mgnt2"
  ::= { mgnt2GigmManagerIpAddressEntry 2 }

mgnt2GigmManagerIpAddressTableRowStatus OBJECT-TYPE
  SYNTAX RowStatus
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "The status of this row."
  ::= { mgnt2GigmManagerIpAddressEntry 3 } 
   
mgnt2GigmManagerTrapPort OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Manager UDP port."
  ::= { mgnt2GigmManagerIpAddressEntry 4 } 

mgnt2GigmManagerEnableCtrl OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of Ctrl."
  ::= { mgnt2GigmManagerIpAddressEntry 5 } 

mgnt2GigmManagerEnableConfig OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of config."
  ::= { mgnt2GigmManagerIpAddressEntry 6 } 

mgnt2GigmManagerEnableEvent OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of event."
  ::= { mgnt2GigmManagerIpAddressEntry 7 } 

mgnt2GigmManagerEnableAlarmCrit OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of crit alarm."
  ::= { mgnt2GigmManagerIpAddressEntry 8 } 

mgnt2GigmManagerEnableAlarmMajor OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of major alarm."
  ::= { mgnt2GigmManagerIpAddressEntry 9 } 

mgnt2GigmManagerEnableAlarmMinor OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of minor alarm."
  ::= { mgnt2GigmManagerIpAddressEntry 10 } 


mgnt2GigmManagerRegistrationTimeout OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Time-out for manager activities."
  ::= { mgnt2GigmManagerIpAddressEntry 11 } 

mgnt2GigmManagerEnableAlarmWarning OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of warning alarm."
  ::= { mgnt2GigmManagerIpAddressEntry 12 } 

mgnt2GigmManagerEnableAlarmIndeterminate OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Enabling trap of indeterminate alarm."
  ::= { mgnt2GigmManagerIpAddressEntry 13 } 


mgnt2GigmBoardIpAddress OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "IP address of the Chassis:This OID defines the IP
        address of the Mgnt2"
  ::= { mgnt2IPmanagment 2 }
  
mgnt2GigmIPAddresByDHCP OBJECT-TYPE
  SYNTAX EkiState
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "IP address retrieved by DHCP:If enabled, the IP
        address is retrieved by DHCP, in which case changes
        take effect after a board reset. If disabled the
        object, mgnt2GigmBoardIpAddress defines the address"
  ::= { mgnt2IPmanagment 3 }  


mgnt2GigmNetmask OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Netmask for the board IP address:This OID defined
        the IP Subnet mask of the Mgnt2"
  ::= { mgnt2IPmanagment 4 }

mgnt2GigmGatewayAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Mgnt2GigmGatewayAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
	"Gateway IP address Table: This table contains all
	the gateway IP addresses."
    ::= { mgnt2IPmanagment 5 }

mgnt2GigmGatewayAddressEntry OBJECT-TYPE
    SYNTAX      Mgnt2GigmGatewayAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
	""
    INDEX   { mgnt2GigmGatewayIndex }
    ::= { mgnt2GigmGatewayAddressTable 1 }

Mgnt2GigmGatewayAddressEntry ::= SEQUENCE {
    mgnt2GigmGatewayIndex         Integer32,
    mgnt2GigmGatewayAddress	     IpAddress,
    mgnt2GigmGatewayOrder         Integer32
}

mgnt2GigmGatewayIndex OBJECT-TYPE
  SYNTAX Integer32(0..1)
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Index of the IP address of the gateway"
  ::= { mgnt2GigmGatewayAddressEntry 1 }
  
mgnt2GigmGatewayAddress OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "IP address of the gateway :This OID defines the IP
         address of the gateway attached to the Chassis"
  ::= { mgnt2GigmGatewayAddressEntry 2 }

mgnt2GigmGatewayOrder OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-create
  STATUS current
  DESCRIPTION
        "Gateway priority: This OID defines the priority of 
	the gateway (lower number for higher priority)"
  ::= { mgnt2GigmGatewayAddressEntry 3 }

mgnt2GigmSyslog OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "IP address of the syslog server:This OID defines
        the IP address of the syslog of the Mgnt2"
  ::= { mgnt2IPmanagment 6 }

mgnt2GigmNtpServer OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "IP address of the ntp server:This OID defines
        the IP address of the ntp server for the Mgnt2"
  ::= { mgnt2IPmanagment 7 }


mgnt2GigmNodeIpAddress OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
         "Node IP address :This OID defines
          the Node IP address in node controller mode for the Mgnt2"
  ::= { mgnt2IPmanagment 8 }


mgnt2ModulesManagement OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 2 }

mgnt2GigmBoardTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2GigmBoardEntry 
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
              "List of PMs plugged in the Chassis"
      ::= { mgnt2ModulesManagement 1 }

mgnt2GigmBoardEntry OBJECT-TYPE
        SYNTAX  Mgnt2GigmBoardEntry 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
              "Row Definition for the PMs table"
        INDEX   { mgnt2IndexBoards }
        ::= { mgnt2GigmBoardTable 1 }
    


Mgnt2GigmBoardEntry ::=
        SEQUENCE {
          mgnt2IndexBoards 
              Integer32,
	  mgnt2Position
              Integer32,
          mgnt2Name
              DisplayString,
	  mgnt2PortNumber
              Integer32,
	  mgnt2LineNumber
              Integer32,
	  mgnt2GroupNumber
              Integer32,
    	  mgnt2RootOIDInventory
              OBJECT IDENTIFIER,
    	  mgnt2SlotOcc
              DisplayString,      
    	  mgnt2SubFunctionLabel
              DisplayString,
   	  mgnt2SlotStatus
              Mgnt2SlotStatus
        }


    mgnt2IndexBoards OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Index for PMs table"
        ::= { mgnt2GigmBoardEntry 1 }

    mgnt2Position OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "PM Slot number:This OID gives the slot number in
              which the PM is plugged"
        ::= { mgnt2GigmBoardEntry 2 }

    mgnt2Name OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "PM name:This OID gives the name of the PM plugged
              in the Mgnt2"
        ::= { mgnt2GigmBoardEntry 3 }

    mgnt2PortNumber OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Number of Client Ports:This OID gives the number of
              client ports on the PM plugged in the Mgnt2"
        ::= { mgnt2GigmBoardEntry 4 }

    mgnt2LineNumber OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Number of Line Ports:This OID gives the number of line
              ports on the PM plugged in the Mgnt2"
        ::= { mgnt2GigmBoardEntry 5 }

    mgnt2GroupNumber OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Number of Groups:This OID gives the number of group
              of clients on the PM plugged in the Mgnt2"
        ::= { mgnt2GigmBoardEntry 6 }

    mgnt2RootOIDInventory OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "root oid of the inventory leaf of the corresponding PM"
        ::= { mgnt2GigmBoardEntry 7 }

    mgnt2SlotOcc OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "PM Slot occupied:This OID gives the slots taken
               by this PM"
        ::= { mgnt2GigmBoardEntry 8 }


    mgnt2SubFunctionLabel OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "Sub Function Label: This OID gives the name of the sub
                 function embedded on the Chassis. (applied only on the
                 100G Chassis)"
        ::= { mgnt2GigmBoardEntry 9 }



    mgnt2SlotStatus OBJECT-TYPE
        SYNTAX  Mgnt2SlotStatus
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "Slot Status: This OID gives the status of the slot 
                 in the Chassis: See Textual COnvention"
        ::= { mgnt2GigmBoardEntry 10 }



mgnt2GigmSelectedBoard OBJECT-TYPE
  SYNTAX INTEGER(1..256)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "PM Slot number selected:PM selected for further
        operations in the Ekinops module board tree. This
        number is the slot number."
  ::= { mgnt2ModulesManagement 7 }




mgnt2GigmMibsTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2GigmMibsEntry 
      MAX-ACCESS  not-accessible
      STATUS  obsolete
      DESCRIPTION
              "List of MIBs supported by the Chassis SNMPAgent"
      ::= { mgnt2SNMPAgentData 4 }

mgnt2GigmMibsEntry OBJECT-TYPE
        SYNTAX  Mgnt2GigmMibsEntry 
        MAX-ACCESS  not-accessible
        STATUS  obsolete
        DESCRIPTION
              "Row definition for MIBs table"
        INDEX   { mgnt2IndexMibs }
        ::= { mgnt2GigmMibsTable 1 }
    


Mgnt2GigmMibsEntry ::=
        SEQUENCE {
          mgnt2IndexMibs 
              Integer32,
          mgnt2MibName
              DisplayString,
          mgnt2MibPartNumber
              DisplayString
        }


    mgnt2IndexMibs OBJECT-TYPE
        SYNTAX  Integer32(1..100)
        MAX-ACCESS  read-only
        STATUS  obsolete
        DESCRIPTION
              "Index for MIBs table"
        ::= { mgnt2GigmMibsEntry 1 }

    mgnt2MibName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  obsolete
        DESCRIPTION
              "MIB name:This OID gives the name of the MIBs
              supported by the SNMP Agent"
        ::= { mgnt2GigmMibsEntry 2 }

    mgnt2MibPartNumber OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  obsolete
        DESCRIPTION
              "MIB Part Number:This OID gives the part number of the MIBs
              supported by the SNMP Agent"
        ::= { mgnt2GigmMibsEntry 3 }

mgnt2GigmLogicalName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Mgnt2 name:This OID defines the name of the Mgnt2"
  ::= { mgnt2SNMPAgentData 5 }

mgnt2GigmEqptType OBJECT-TYPE
  SYNTAX Integer32(1..128)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
        "Equipment type:This OID defines the type of the Equipment"
  ::= { mgnt2SNMPAgentData 6 }

mgnt2GigmTrapCount OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 7 }

mgnt2GigmTrapCounter OBJECT-TYPE
  SYNTAX Integer32(1..65535)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
        "Trap counter:This OID counts the number of trap sent"
  ::= { mgnt2GigmTrapCount 1 }

mgnt2GigmResetTrapCounter OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Reset trap counter:This OID reset the trap counter to 0"
  ::= { mgnt2GigmTrapCount 2 }


mgnt2GigmSecurity OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 8 }

mgnt2GigmRoCommunity OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "SNMP Get community:This OID defines the community for the 
	SNMP Get function"
  ::= { mgnt2GigmSecurity 1 }

mgnt2GigmRwCommunity OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "SNMP Set community:This OID defines the community for the 
	SNMP Set function"
  ::= { mgnt2GigmSecurity 2 }


mgnt2GigmTrapCommunity OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "SNMP Trap community:This OID defines the community for the 
	SNMP Trap function"
  ::= { mgnt2GigmSecurity 3 }


mgnt2GigmTime OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 9 }

mgnt2GigmCurrentHour OBJECT-TYPE
  SYNTAX INTEGER(0..23)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Hour time:This OID defines the hour of the chassis' time" 
  ::= { mgnt2GigmTime 1 }

mgnt2GigmCurrentMinute OBJECT-TYPE
  SYNTAX INTEGER(0..59)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Minute time:This OID defines the minute of the chassis' time" 
  ::= { mgnt2GigmTime 2 }

mgnt2GigmCurrentYear OBJECT-TYPE
  SYNTAX INTEGER(1970..3000)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis year date:This OID defines the year of the chassis' date" 
  ::= { mgnt2GigmTime 3 }

mgnt2GigmCurrentMonth OBJECT-TYPE
  SYNTAX INTEGER(1..12)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis month date:This OID defines the month of the chassis' date"
  ::= { mgnt2GigmTime 4 }

mgnt2GigmCurrentDay OBJECT-TYPE
  SYNTAX INTEGER(1..31)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis day date:This OID defines the day of the chassis' date" 
  ::= { mgnt2GigmTime 5 }



mgnt2Authentication OBJECT IDENTIFIER ::= { mgnt2SNMPAgentData 10 }

mgnt2GigmRadiusServer OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "IP address of the RADIUS server:This OID defines
        the IP address of the external RADIUS server for authentication"
  ::= { mgnt2Authentication 1 }

mgnt2GigmRadiusPort OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "TCP port number of the RADIUS server:This OID defines
        the TCP port number of the external RADIUS server for
 	authentication"
  ::= { mgnt2Authentication 2 }

mgnt2GigmRadiusSecret OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Shared secret of the RADIUS server:This OID defines
        the shared secret password of the RADIUS server for
 	authentication"
 ::= { mgnt2Authentication 3 }


mgnt2GigmLdapHost OBJECT-TYPE
  SYNTAX IpAddress
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "IP address of the LDAP host:This OID defines
        the IP address of the external LDAP server for authentication"
  ::= { mgnt2Authentication 4 }

mgnt2GigmLdapPort OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "TCP port number of the LDAP server:This OID defines
        the TCP port number of the external LDAP server for
 	authentication"
  ::= { mgnt2Authentication 5 }


mgnt2GigmLdapBase OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "LDAP base:This OID defines the name of the search 
        base of the LDAP server for
 	authentication<Help>LDAP base name spelled as follows:
	'ou=users,ou=network,dc=yourcompany,dc=net'"
 ::= { mgnt2Authentication 6 }

mgnt2GigmLdapVersion OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "Protocol number in use by the LDAP server:This OID defines
        the protocol version used by the external LDAP server for
 	authentication<Help>Protocol version used by the external LDAP
	server for authentication"
  ::= { mgnt2Authentication 7 }

mgnt2GigmLdapBindDn OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "LDAP Bind DN:This OID defines the login name used to connect 
        into the LDAP server base for
 	authentication<Help>LDAP binddn spelled as follows:
	'cn=ldap_admin,dc=yourcompany,dc=net'"
 ::= { mgnt2Authentication 8 }

mgnt2GigmLdapBindPw OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-write
   STATUS deprecated
   DESCRIPTION
         "Credentials to bind the LDAP server with:This OID defines
         the credentials to bind the LDAP server with for
  	authentication<Help>Credentials for LDAP access (bindpw)"
  ::= { mgnt2Authentication 9 }


mgnt2GigmLdapScope OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "Scope for LDAP base search:This OID defines
        the search scope for an LDAP base search
	<Help>LDAP search scope"
 ::= { mgnt2Authentication 10 }

mgnt2GigmLdapPamPasswd OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS deprecated
  DESCRIPTION
        "PAM password handling:This OID defines
        the way the PAM password is handled for LDAP authentication
	<Help>The 'pam_password' option sould be one of the following:
	'clear', 'crypt', 'md5', 'racf', 'exop'"
 ::= { mgnt2Authentication 11 }

mgnt2GigmAuthenticationType OBJECT-TYPE
  SYNTAX Mgnt2AuthTypeValues
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Authentication type in use"
  ::= { mgnt2Authentication 12 }


-- *****************************************************************
--
-- MGNT2 Software Management tables
--
-- *****************************************************************

mgnt2DwlUploadingTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2DwlUploadingEntry
      MAX-ACCESS  not-accessible
      STATUS  deprecated
      DESCRIPTION
              "SNMP Agent SW packages in ram: List of the SNMP
              agent software packages available in /ram for
              download on the Chassis managment module flash"
      ::= { mgnt2SoftwareManagement 1 }

mgnt2DwlUploadingEntry OBJECT-TYPE
        SYNTAX  Mgnt2DwlUploadingEntry
        MAX-ACCESS  not-accessible
        STATUS  deprecated
        DESCRIPTION
              "Row definition for the package uploading table"
        INDEX   { mgnt2IndexUpload }
        ::= { mgnt2DwlUploadingTable 1 }

Mgnt2DwlUploadingEntry::=
        SEQUENCE {
          mgnt2IndexUpload
              Integer32,
          mgnt2DwlUploadFileName
              DisplayString,
          mgnt2ImmediateReplacement
              EkiState,
          mgnt2FileUpload
	      	  EkiOnOff,
          mgnt2DeletePackageFromRam
              EkiOnOff,
          mgnt2FlashingInProgress
              EkiOnOff
        }

    mgnt2IndexUpload OBJECT-TYPE
        SYNTAX  Integer32(0..4)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Index for uploading table"
        ::= { mgnt2DwlUploadingEntry 1 }

    mgnt2DwlUploadFileName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Package filename in RAM:This OID gives the name of
              the SNMP agent software packages in RAM"
        ::= { mgnt2DwlUploadingEntry 2 }

    mgnt2ImmediateReplacement OBJECT-TYPE
        SYNTAX  EkiState
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Immediat Agent Replacement:This OID indicates to
              switch to selected SNMP agent immediately or after
              reset of the MGNT2"
        ::= { mgnt2DwlUploadingEntry 3 }

    mgnt2FileUpload OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Agent File Upload:This OID validates the upload of
              the SNMP agent from RAM to FLASH"
        ::= { mgnt2DwlUploadingEntry 4 }

    mgnt2DeletePackageFromRam OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Delete Package from RAM:This OID requests to delete
              the SNMP Agent SW package from RAM"
        ::= { mgnt2DwlUploadingEntry 5 }

    mgnt2FlashingInProgress OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Flashing in Progress:This OID indicates whether there
              is a file upload to FLASH in progress"
        ::= { mgnt2DwlUploadingEntry 6 }



mgnt2DwlPackageTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2DwlPackageEntry
      MAX-ACCESS  not-accessible
      STATUS  deprecated
      DESCRIPTION
              "List of SNMP agent software packages 
               present in flash memory"
      ::= { mgnt2SoftwareManagement 2 }

mgnt2DwlPackageEntry OBJECT-TYPE
        SYNTAX  Mgnt2DwlPackageEntry
        MAX-ACCESS  not-accessible
        STATUS  deprecated
        DESCRIPTION
              "Row definition for the package management table"
        INDEX   { mgnt2IndexPackage }
        ::= { mgnt2DwlPackageTable 1 }

Mgnt2DwlPackageEntry::=
        SEQUENCE {
          mgnt2IndexPackage
              Integer32,
          mgnt2DwlPackageFileName
              DisplayString,
          mgnt2ExtractedPack 
              EkiOnOff,
          mgnt2SwitchTo
              EkiOnOff,
          mgnt2Immediate
              EkiOnOff,
          mgnt2DeletePackageFromFlash
              EkiOnOff,
          mgnt2PackageExtractionInProgress
              EkiOnOff
        }

    mgnt2IndexPackage OBJECT-TYPE
        SYNTAX  Integer32(0..4)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Index for package management table"
        ::= { mgnt2DwlPackageEntry 1 }

    mgnt2DwlPackageFileName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Package File name in FLASH:This OID gives the name
              of the SNMP agent software package in FLASH"
        ::= { mgnt2DwlPackageEntry 2 }

    mgnt2ExtractedPack OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Extracted SNMP agent software pack.: Indicates
              whether the package is currently extracted in the FLASH.
              If it is, it must not be deleted"
        ::= { mgnt2DwlPackageEntry 3 }

    mgnt2SwitchTo OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Switch to package:This OID activates the SNMP Agent
              Software package"
        ::= { mgnt2DwlPackageEntry 4 }

    mgnt2Immediate OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Immediate SNMP agent activation: This OID indicates
              whether the package is scheduled for immediate
              activation or activation will take place following the
              next reset"
        ::= { mgnt2DwlPackageEntry 5 }

    mgnt2DeletePackageFromFlash OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Delete package from FLASH:This OID deletes the SNMP
              agent software package from the FLASH"
        ::= { mgnt2DwlPackageEntry 6 }

    mgnt2PackageExtractionInProgress OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Package extraction in progress:This OID indicates that
              a SNMP agent software activation is in progress"
        ::= { mgnt2DwlPackageEntry 7 }

mgnt2DwlUploadingTableUpdate OBJECT-TYPE
      SYNTAX  EkiOnOff
      MAX-ACCESS  read-write
      STATUS  deprecated
      DESCRIPTION
              "Uploading Table update:This OID updates the contents of
              the uploading table"
      ::= { mgnt2SoftwareManagement 3 }
      
      


mgnt2LoadPMTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2LoadPMEntry
      MAX-ACCESS  not-accessible
      STATUS  deprecated
      DESCRIPTION
              "List of the PM module software files (GW/SW)
              present on the repository"
      ::= { mgnt2SoftwareManagement 4 }


mgnt2LoadPMEntry OBJECT-TYPE
        SYNTAX  Mgnt2LoadPMEntry
        MAX-ACCESS  not-accessible
        STATUS  deprecated
        DESCRIPTION
              "Row definition for the LOAD article table"
        INDEX   { mgnt2LoadPMIndex }
        ::= { mgnt2LoadPMTable 1 }

Mgnt2LoadPMEntry::=
        SEQUENCE {
          mgnt2LoadPMIndex 
              Integer32,
          mgnt2LoadFileName
              DisplayString,
          mgnt2LoadFileType
              EkiLoadGWSW,
          mgnt2LoadState
              EkiLoadState,
          mgnt2LoadModuleNumber
              Integer32,
          mgnt2LoadResetMethod
              EkiLoadPermutMethod,
          mgnt2LoadResetMode
              EkiLoadPermutMode,
          mgnt2LoadBankNumber
              Integer32,
          mgnt2LoadDownloadProgress
              Integer32,
          mgnt2LoadTransfer
              EkiOnOff,
          mgnt2LoadDelete
              EkiOnOff
        }

    mgnt2LoadPMIndex OBJECT-TYPE
        SYNTAX  Integer32(0..32)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Index for Load article table"
        ::= { mgnt2LoadPMEntry 1 }

    mgnt2LoadFileName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "PM Upgrade filename:This OID gives the name of
              the file"
        ::= { mgnt2LoadPMEntry 2 }

    mgnt2LoadFileType OBJECT-TYPE
        SYNTAX  EkiLoadGWSW
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade file type:This OID gives the type of
              file (gateware or software)"
        ::= { mgnt2LoadPMEntry 3 }

    mgnt2LoadState OBJECT-TYPE
        SYNTAX  EkiLoadState
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade status:This OID gives the status of the
              selected Load file"
        ::= { mgnt2LoadPMEntry 4 }

    mgnt2LoadModuleNumber OBJECT-TYPE
        SYNTAX  Integer32(1..8)
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "PM ugprade target:This OID defines the slot number
              of the PM to upgrade"
        ::= { mgnt2LoadPMEntry 5 }

    mgnt2LoadResetMethod OBJECT-TYPE
        SYNTAX  EkiLoadPermutMethod
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade reset method:This OID defines the reset
              method (manual, immediate or scheduled)"
        ::= { mgnt2LoadPMEntry 6 }

    mgnt2LoadResetMode OBJECT-TYPE
        SYNTAX  EkiLoadPermutMode
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade reset mode:This OID defines the type of
              reset (cold or warm)"
        ::= { mgnt2LoadPMEntry 7 }

    mgnt2LoadBankNumber OBJECT-TYPE
        SYNTAX  Integer32(0..4)
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade bank number:This OID defines the target
               bank number in the PM's flash"
        ::= { mgnt2LoadPMEntry 8 }

    mgnt2LoadDownloadProgress OBJECT-TYPE
        SYNTAX  Integer32(0..100)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade progress:This OID gives the upgrade
              progress (percentage)"
        ::= { mgnt2LoadPMEntry 9 }
        
    mgnt2LoadTransfer OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade transfer:This OID launchs the transfer
              of the associated file to the selected PM's flash"
        ::= { mgnt2LoadPMEntry 10 }

    mgnt2LoadDelete OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "PM upgrade delete file:This OID deletes the
              associated file from the RAM of the management board"
        ::= { mgnt2LoadPMEntry 11 }


mgnt2LoadPMTableUpdate OBJECT-TYPE
      SYNTAX  EkiOnOff
      MAX-ACCESS  read-write
      STATUS  deprecated
      DESCRIPTION
              "Load PM Table update:This OID updates the contents
              of the Load table"
      ::= { mgnt2SoftwareManagement 5 }



mgnt2DwlEkicraftPkgTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2DwlEkicraftPkgEntry
      MAX-ACCESS  not-accessible
      STATUS  deprecated
      DESCRIPTION
              "List of Ekicraft software packages 
               present in flash memory"
      ::= { mgnt2SoftwareManagement 6 }

mgnt2DwlEkicraftPkgEntry OBJECT-TYPE
        SYNTAX  Mgnt2DwlEkicraftPkgEntry
        MAX-ACCESS  not-accessible
        STATUS  deprecated
        DESCRIPTION
              "Row definition for the package management table"
        INDEX   { mgnt2IndexEkicraftPkg }
        ::= { mgnt2DwlEkicraftPkgTable 1 }

Mgnt2DwlEkicraftPkgEntry::=
        SEQUENCE {
          mgnt2IndexEkicraftPkg
              Integer32,
          mgnt2DwlEkicraftPkgFileName
              DisplayString,
          mgnt2DwlEkicraftExtractedPack 
              EkiOnOff,
          mgnt2DwlEkicraftSwitchTo
              EkiOnOff,
          mgnt2DwlEkicraftImmediate
              EkiOnOff,
          mgnt2DeleteEkicraftPkgFromFlash
              EkiOnOff,
          mgnt2EkicraftPkgExtractionInProgress
              EkiOnOff
        }

    mgnt2IndexEkicraftPkg OBJECT-TYPE
        SYNTAX  Integer32(0..4)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Index for Ekicraft package management table"
        ::= { mgnt2DwlEkicraftPkgEntry 1 }

    mgnt2DwlEkicraftPkgFileName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Package File name in FLASH:This OID gives the name
              of the Ekicraft software package in FLASH"
        ::= { mgnt2DwlEkicraftPkgEntry 2 }

    mgnt2DwlEkicraftExtractedPack OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Extracted Ekicraft software pack.: Indicates
              whether the package is currently extracted in the FLASH.
              If it is, it must not be deleted"
        ::= { mgnt2DwlEkicraftPkgEntry 3 }

    mgnt2DwlEkicraftSwitchTo OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Switch to package:This OID activates the Ekicraft
              Software package"
        ::= { mgnt2DwlEkicraftPkgEntry 4 }

    mgnt2DwlEkicraftImmediate OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Immediate Ekicraft activation: This OID indicates
              whether the package is scheduled for immediate
              activation or activation will take place following the
              next reset"
        ::= { mgnt2DwlEkicraftPkgEntry 5 }

    mgnt2DeleteEkicraftPkgFromFlash OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Delete package from FLASH:This OID deletes the Ekicraft
              software package from the FLASH"
        ::= { mgnt2DwlEkicraftPkgEntry 6 }

    mgnt2EkicraftPkgExtractionInProgress OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Package extraction in progress:This OID indicates that
              an Ekicraft activation is in progress"
        ::= { mgnt2DwlEkicraftPkgEntry 7 }

      
-- *****************************************************************
--
-- Config management tables
--
-- *****************************************************************

mgnt2CnfUploadConfigFilesTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2CnfUploadConfigFilesEntry
      MAX-ACCESS  not-accessible
      STATUS  deprecated
      DESCRIPTION
              "List of configuration files uploaded to RAM"
      ::= { mgnt2ConfigManagement 1 }

mgnt2CnfUploadConfigFilesEntry OBJECT-TYPE
        SYNTAX  Mgnt2CnfUploadConfigFilesEntry
        MAX-ACCESS  not-accessible
        STATUS  deprecated
        DESCRIPTION
              "Row definition for the package uploading table"
        INDEX   { mgnt2CnfUploadConfigIndex }
        ::= { mgnt2CnfUploadConfigFilesTable 1 }

Mgnt2CnfUploadConfigFilesEntry::=
        SEQUENCE {
          mgnt2CnfUploadConfigIndex
              Integer32,
          mgnt2CnfConfigFileName
              DisplayString,
          mgnt2CnfConfigSlot
              Integer32,
          mgnt2CnfConfigUpload
	      	  EkiOnOff,
          mgnt2CnfDeleteConfigFile
              EkiOnOff
        }

    mgnt2CnfUploadConfigIndex OBJECT-TYPE
        SYNTAX  Integer32(0..16)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Index of config files"
        ::= { mgnt2CnfUploadConfigFilesEntry 1 }

    mgnt2CnfConfigFileName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Configuration filename in RAM:This OID gives the
              name of the configuration file in RAM"
        ::= { mgnt2CnfUploadConfigFilesEntry 2 }

    mgnt2CnfConfigSlot OBJECT-TYPE
        SYNTAX  Integer32(0..3)
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration target:This OID defines the target
              slot number for the configuration file"
        ::= { mgnt2CnfUploadConfigFilesEntry 3 }

    mgnt2CnfConfigUpload OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration Upload:This OID uploads the
              configuration file to the specified slot number
              in the PM FLASH"
        ::= { mgnt2CnfUploadConfigFilesEntry 4 }

    mgnt2CnfDeleteConfigFile OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration delete from RAM:This OID deletes the
              configuration file from RAM"
        ::= { mgnt2CnfUploadConfigFilesEntry 5 }




mgnt2CnfManageConfigFilesTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2CnfManageConfigFilesEntry
      MAX-ACCESS  not-accessible
      STATUS  deprecated
      DESCRIPTION
              "List of configuration files uploaded to RAM"
      ::= { mgnt2ConfigManagement 2 }

mgnt2CnfManageConfigFilesEntry OBJECT-TYPE
        SYNTAX  Mgnt2CnfManageConfigFilesEntry
        MAX-ACCESS  not-accessible
        STATUS  deprecated
        DESCRIPTION
              "Row definition for the package uploading table"
        INDEX   { mgnt2CnfManageConfigIndex }
        ::= { mgnt2CnfManageConfigFilesTable 1 }

Mgnt2CnfManageConfigFilesEntry::=
        SEQUENCE {
          mgnt2CnfManageConfigIndex
              Integer32,
          mgnt2CnfManageConfigFileID
              DisplayString,
          mgnt2CnfManageConfigFileName
              DisplayString,
          mgnt2CnfModuleSlotNumber
              Integer32,
          mgnt2CnfBackupConfig
	      	  EkiOnOff,
          mgnt2CnfRestoreConfig
              EkiOnOff,
          mgnt2CnfExportConfig
              EkiOnOff,
	  mgnt2CnfDeleteConfig
              EkiOnOff
        }

    mgnt2CnfManageConfigIndex OBJECT-TYPE
        SYNTAX  Integer32(0..16)
        MAX-ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
              "Index of config file slots"
        ::= { mgnt2CnfManageConfigFilesEntry 1 }

    mgnt2CnfManageConfigFileID OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration file ID in FLASH:This OID gives the
              ID of the configuration file in MGNT2 FLASH"
        ::= { mgnt2CnfManageConfigFilesEntry 2 }

    mgnt2CnfManageConfigFileName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration file name in FLASH:This OID gives the
              name of the configuration file in MGNT2 FLASH"
        ::= { mgnt2CnfManageConfigFilesEntry 3 }

    mgnt2CnfModuleSlotNumber OBJECT-TYPE
        SYNTAX  Integer32(3..6)
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration target:This OID defines the target
              module slot number for the configuration file"
        ::= { mgnt2CnfManageConfigFilesEntry 4 }

    mgnt2CnfBackupConfig OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration backup:This OID backups the
              configuration of the specified module to the
              selected file in MGNT2 FLASH"
        ::= { mgnt2CnfManageConfigFilesEntry 5 }

    mgnt2CnfRestoreConfig OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration Restore:This OID restores the
              configuration of the specified module from the
              selected file in MGNT2 FLASH"
        ::= { mgnt2CnfManageConfigFilesEntry 6 }

    mgnt2CnfExportConfig OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration Export:This OID exports the selected
              file in MGNT2 FLASH to a file in RAM"
        ::= { mgnt2CnfManageConfigFilesEntry 7 }


    mgnt2CnfDeleteConfig OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
              "Configuration delete from FLASH:This OID deletes the
              configuration file from the MGNT2 FLASH"
        ::= { mgnt2CnfManageConfigFilesEntry 8 }

      
-- *****************************************************************
--
-- MGNT2 Remote inventory
--
-- *****************************************************************

mgnt2RinvHwPlatform OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Hardware inventory:This OID gives the
        Hardware inventory of the Mgnt2 management module"
  ::= { mgnt2RemoteInventory 1 }

mgnt2RinvSoftwarePackage OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Software package inventory:this OID gives
        the Software package inventory of the Mgnt2
        management module"
  ::= { mgnt2RemoteInventory 2 }

mgnt2RinvGateware OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Gateware inventory:This OID gives the
        gateware inventory of the Mgnt2 management module"
  ::= { mgnt2RemoteInventory 3 }


mgnt2RinvAgent OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Software inventory:This OID gives the
        software inventory of the Mgnt2 management module"
  ::= { mgnt2RemoteInventory 4 }

mgnt2RinvCraft OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Craft inventory:This OID gives the
        craft inventory of the Mgnt2 management module"
  ::= { mgnt2RemoteInventory 5 }

mgnt2RinvLinux OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Chassis Linux inventory:This OID gives the
        linux inventory of the Mgnt2 management module"
  ::= { mgnt2RemoteInventory 6 }

EkiPlugInState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION "Plug-in state"
    SYNTAX INTEGER {
		absent(0),
		loaded(1),
		versionError(2),
		symbolError(3)
        }  

mgnt2GigmPlugInTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2GigmPlugInEntry 
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
              "List of Plug-ins present"
      ::= { mgnt2RemoteInventory 7 }

mgnt2GigmPlugInEntry OBJECT-TYPE
        SYNTAX  Mgnt2GigmPlugInEntry 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
              "Row Definition for the Plug-ins table"
        INDEX   { mgnt2IndexPlugIns }
        ::= { mgnt2GigmPlugInTable 1 }

Mgnt2GigmPlugInEntry ::=
        SEQUENCE {
          mgnt2IndexPlugIns 
              Integer32,
          mgnt2PlugInRinv
              DisplayString,
	  mgnt2PollingPresent
              EkiPlugInState,
	  mgnt2SnmpPresent
              EkiPlugInState  
        }

    mgnt2IndexPlugIns OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Index for PMs table"
        ::= { mgnt2GigmPlugInEntry 1 }


    mgnt2PlugInRinv OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Plug-in RI:This OID gives the remote inventory of the plug-in"
        ::= { mgnt2GigmPlugInEntry 2 }

    mgnt2PollingPresent OBJECT-TYPE
        SYNTAX  EkiPlugInState
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Polling present:This OID gives the presence of the polling plug-in"
        ::= { mgnt2GigmPlugInEntry 3 }

    mgnt2SnmpPresent OBJECT-TYPE
        SYNTAX  EkiPlugInState
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Snmp present:This OID gives the presence of the snmp plug-in"
        ::= { mgnt2GigmPlugInEntry 4 }

mgnt2RinvBackpanel OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Backpanel inventory:This OID gives the
        Backpanel inventory of the chassis"
  ::= { mgnt2RemoteInventory 8 }

mgnt2RinvFan OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Fan inventory:This OID gives the
        fan inventory of the chassis"
  ::= { mgnt2RemoteInventory 9 }

mgnt2RinvUboot OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "U-Boot inventory:This OID gives the
        U-Boot inventory"
  ::= { mgnt2RemoteInventory 10 }

-- *****************************************************************
--
-- MGNT2 Error counters
--
-- *****************************************************************


mgnt2GigmErrorCounterTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2GigmErrorCounterEntry 
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
              "List of error counters"
      ::= { mgnt2ErrorCounters 1 }

mgnt2GigmErrorCounterEntry OBJECT-TYPE
        SYNTAX  Mgnt2GigmErrorCounterEntry 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
              "Row Definition for the error counters table"
        INDEX   { mgnt2IndexErrorCounter }
        ::= { mgnt2GigmErrorCounterTable 1 }

Mgnt2GigmErrorCounterEntry ::=
        SEQUENCE {
          mgnt2IndexErrorCounter 
              Integer32,
          mgnt2ErrorCounterSlotNumber
              Integer32,
	  mgnt2ErrorCounterValue
              Integer32
        }

    mgnt2IndexErrorCounter OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Index for error counters table"
        ::= { mgnt2GigmErrorCounterEntry 1 }


    mgnt2ErrorCounterSlotNumber OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Slot number:This OID gives the slot number for the corresponding counter"
        ::= { mgnt2GigmErrorCounterEntry 2 }

    mgnt2ErrorCounterValue OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Count value:This OID gives the value of the error counter"
        ::= { mgnt2GigmErrorCounterEntry 3 }


mgnt2GigmResetErrorCounters OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Reset error counters:This OID reset the error counters to 0"
  ::= { mgnt2ErrorCounters 2 }


-- *****************************************************************
--
-- MGNT2 Perf objects
--
-- *****************************************************************

mgnt2PerfCapabilityTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Mgnt2PerfCapabilityEntry 
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
              "List of Perf capability of PMs plugged in the Chassis"
      ::= { mgnt2Perf 1 }

mgnt2PerfCapabilityEntry OBJECT-TYPE
        SYNTAX  Mgnt2PerfCapabilityEntry 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
              "Row Definition for the Perf capability table"
        INDEX   { mgnt2PerfCapIndexBoards }
        ::= { mgnt2PerfCapabilityTable 1 }
    


Mgnt2PerfCapabilityEntry ::=
        SEQUENCE {
          mgnt2PerfCapIndexBoards 
              Integer32,
	        mgnt2PerfCapPosition
              Integer32,
          mgnt2PerfCapName
              DisplayString,
	        mgnt2PerfCapStatus
              EkiOnOff,
	        mgnt2PerfCapOidEnable
              OBJECT IDENTIFIER
        }


    mgnt2PerfCapIndexBoards OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Index for Perf cap table"
        ::= { mgnt2PerfCapabilityEntry 1 }

    mgnt2PerfCapPosition OBJECT-TYPE
        SYNTAX  Integer32(1..32)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "PM Slot number:This OID gives the slot number in
              which the PM is plugged"
        ::= { mgnt2PerfCapabilityEntry 2 }

    mgnt2PerfCapName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "PM name:This OID gives the name of the PM plugged
              in the Mgnt2"
        ::= { mgnt2PerfCapabilityEntry 3 }

    mgnt2PerfCapStatus OBJECT-TYPE
        SYNTAX  EkiOnOff
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "Status of the perf cap:This OID gives the capability
              of the pm to do performance"
        ::= { mgnt2PerfCapabilityEntry 4 }

    mgnt2PerfCapOidEnable OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
              "OID of the object perf enable:This OID gives the OID of 
               the perf enable object of the correspondind mib of the module"
        ::= { mgnt2PerfCapabilityEntry 5 }





mgnt2GigmPerf15minSync OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "15 min sync perf : this oid send a 15min sync to all modules"
  ::= { mgnt2Perf 2 }

mgnt2GigmPerf24hSync OBJECT-TYPE
  SYNTAX EkiOnOff
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "15 min sync perf : this oid send a 24h sync to all modules"
  ::= { mgnt2Perf 3 }

mgnt2PerfResyncNMS OBJECT-TYPE
  SYNTAX Mgnt2PerfResyncValues
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
        "Resync Perf : this oid allows to create an historical perf file for all modules"
  ::= { mgnt2Perf 4 }


-- *****************************************************************
--
-- MGNT2 Board management
--
-- *****************************************************************

mgnt2alarms OBJECT IDENTIFIER ::= { mgnt2Hardware 1}
mgnt2controls OBJECT IDENTIFIER ::= { mgnt2Hardware 2}
mgnt2config OBJECT IDENTIFIER ::= { mgnt2Hardware 3}






--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
---     ALARMS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************



--- *****************************************************
---     LEAF for the synthAlm0 article
--- *****************************************************
mgnt2AlmsynthAlm0 OBJECT IDENTIFIER ::= { mgnt2alarms 0 }




mgnt2AlmMgntDefFuseB OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Mgnt Fuse B Fail :This OID indicates 
        that the fuse of the power input 
        B is in fail condition on the Management 
        board  <Help>  Status of the MGNT 
        Fuse B <Condtype> MGNT_DEF_FUSE_B 
        <Probcause> powerProblem (36) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmsynthAlm0 16 }



mgnt2AlmMgntDefFuseA OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Mgnt Fuse A Fail :This OID indicates 
        that the fuse of the power input 
        A is in fail condition on the Management 
        board  <Help>  Status of the MGNT 
        Fuse A <Condtype> MGNT_DEF_FUSE_A 
        <Probcause> powerProblem (36) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmsynthAlm0 15 }



mgnt2AlmDef48b OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Power Input B Present :This OID 
        indicates that there is not input 
        power on the right power connector 
        (B)  <Help>  This alarm indicates 
        if the power input B is present 
        (right power connector) <Condtype> 
        DEF_48B <Probcause> powerProblem 
        (36) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmsynthAlm0 12 }



mgnt2AlmDef48a OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Power Input A Present :This OID 
        indicates that there is not input 
        power on the right power connector 
        (A)  <Help>  This alarm indicates 
        if the power input B is present 
        (left power connector) <Condtype> 
        DEF_48A <Probcause> powerProblem 
        (36) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmsynthAlm0 11 }



mgnt2AlmFansFailure OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Chassis Fan Module Failure :This 
        OID indicates that at least one 
        of the three FAN unit of the FAN 
        module is in fail condition <Condtype> 
        FANS_FAILURE <Probcause> other(1) 
        <Alarmtype> equipmentAlarm (5)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmsynthAlm0 10 }



mgnt2AlmAbsFailure OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Chassis Management Module Failure 
        :This OID indicates that the Chassis 
        Management module is in fail condition 
        <Condtype> ABS_FAILURE <Probcause> 
        other(1) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmsynthAlm0 9 }



--- *****************************************************
---     LEAF for the synthAlm1 article
--- *****************************************************
mgnt2AlmsynthAlm1 OBJECT IDENTIFIER ::= { mgnt2alarms 1 }




mgnt2AlmAcknowledge OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Alarm Ack.  :This OID indicates 
        the alarms have been acknowledged 
        by the user (locally or remotely) 
          <Help>  This status indicates 
        the alarms have been acknowledged 
        by the user (locally or remotely) 
        <Condtype> ACKNOWLEDGE <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmsynthAlm1 16 }



mgnt2AlmCritVisual OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Critical Chassis Alarm :This OID 
        indicates at least one Critical 
        alarm is active on the complete 
        chassis (including TR-FAN, MGNT 
        and PM)  <Help>  This alarm indicates 
        at least one Critical alarm is
         active on the complete chassis 
        (including TR-FAN, MGNT and PM)
 
        <Condtype> CRIT_VISUAL <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmsynthAlm1 3 }



mgnt2AlmUrgVisual OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Major Chassis Alarm  :This OID 
        indicates at least one Major alarm 
        is active on the complete chassis 
        (including TR-FAN, MGNT and PM) 
          <Help>  This alarm indicates
         at least one Major alarm is active 
        on the complete chassis (including 
        TR-FAN, MGNT and PM) <Condtype> 
        URG_VISUAL <Probcause> other(1) 
        <Alarmtype> other (1) <Polarity> 
        (2) 
        "
	  ::= { mgnt2AlmsynthAlm1 2 }



mgnt2AlmNurgVisual OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Minor Chassis Alarm  :This OID 
        indicates at least one Minor alarm 
        is active on the complete chassis 
        (including TR-FAN, MGNT and PM) 
         <Help>  This alarm indicates at 
        least one Minor alarm is active 
        on the complete chassis (including 
        TR-FAN, MGNT and PM) <Condtype> 
        NURG_VISUAL <Probcause> other(1) 
        <Alarmtype> other (1) <Polarity> 
        (2) 
        "
	  ::= { mgnt2AlmsynthAlm1 1 }



--- *****************************************************
---     LEAF for the boardMgmntSet1 article
--- *****************************************************
mgnt2AlmboardMgmntSet1 OBJECT IDENTIFIER ::= { mgnt2alarms 16 }




mgnt2AlmPmFanAbsent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN module present in Chassis
         :This OID indicates the presence 
        of the FAN module in the Chassis. 
         <Help>  This alarm indicates if 
        the FAN module is detected in the 
        chassis. <Condtype> PM_FAN_ABSENT 
        <Probcause> other(1) <Alarmtype> 
        equipmentAlarm (5)  <Polarity>
         (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 14 }



mgnt2AlmPmSlot11Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 11
         :This OID indicates the presence 
        of a PM in Slot 11 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 11
         <Condtype> PM_SLOT11_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 12 }



mgnt2AlmPmSlot10Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 10
         :This OID indicates the presence 
        of a PM in Slot 10 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 10
         <Condtype> PM_SLOT10_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 11 }



mgnt2AlmPmSlot9Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 9 :This 
        OID indicates the presence of a 
        PM in Slot 9 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 9
         <Condtype> PM_SLOT9_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 10 }



mgnt2AlmPmSlot8Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 8 :This 
        OID indicates the presence of a 
        PM in Slot 8 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 8
         <Condtype> PM_SLOT8_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 9 }



mgnt2AlmPmSlot7Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 7 :This 
        OID indicates the presence of a 
        PM in Slot 7 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 7
         <Condtype> PM_SLOT7_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 8 }



mgnt2AlmPmSlot6Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 6 :This 
        OID indicates the presence of a 
        PM in Slot 6 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 6
         <Condtype> PM_SLOT6_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 7 }



mgnt2AlmPmSlot5Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 5 :This 
        OID indicates the presence of a 
        PM in Slot 5 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 5
         <Condtype> PM_SLOT5_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 6 }



mgnt2AlmPmSlot4Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 4 :This 
        OID indicates the presence of a 
        PM in Slot 4 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 4
         <Condtype> PM_SLOT4_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 5 }



mgnt2AlmPmSlot3Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 3 :This 
        OID indicates the presence of a 
        PM in Slot 3 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 3
         <Condtype> PM_SLOT3_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 4 }



mgnt2AlmPmSlot2Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 2 :This 
        OID indicates the presence of a 
        PM in Slot 2 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 2
         <Condtype> PM_SLOT2_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 3 }



mgnt2AlmPmSlot1Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 1 :This 
        OID indicates the presence of a 
        PM in Slot 1 of the Chassis . 
         <Help>  This status indicates
         if a PM is detected in slot 1
         <Condtype> PM_SLOT1_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet1 2 }



--- *****************************************************
---     LEAF for the boardMgmntSet2 article
--- *****************************************************
mgnt2AlmboardMgmntSet2 OBJECT IDENTIFIER ::= { mgnt2alarms 17 }




mgnt2AlmPmSlot20Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 20
         :This OID indicates the presence 
        of a PM in Slot 20 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 20
         <Condtype> PM_SLOT20_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 9 }



mgnt2AlmPmSlot19Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 19
         :This OID indicates the presence 
        of a PM in Slot 19 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 19
         <Condtype> PM_SLOT19_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 8 }



mgnt2AlmPmSlot18Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 18
         :This OID indicates the presence 
        of a PM in Slot 18 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 18
         <Condtype> PM_SLOT18_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 7 }



mgnt2AlmPmSlot17Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 17
         :This OID indicates the presence 
        of a PM in Slot 17 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 17
         <Condtype> PM_SLOT17_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 6 }



mgnt2AlmPmSlot16Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 16
         :This OID indicates the presence 
        of a PM in Slot 16 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 16
         <Condtype> PM_SLOT16_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 5 }



mgnt2AlmPmSlot15Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 15
         :This OID indicates the presence 
        of a PM in Slot 15 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 15
         <Condtype> PM_SLOT15_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 4 }



mgnt2AlmPmSlot14Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 14
         :This OID indicates the presence 
        of a PM in Slot 14 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 14
         <Condtype> PM_SLOT14_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 3 }



mgnt2AlmPmSlot13Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 13
         :This OID indicates the presence 
        of a PM in Slot 13 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 13
         <Condtype> PM_SLOT13_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 2 }



mgnt2AlmPmSlot12Absent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        PM present in Chassis slot 12
         :This OID indicates the presence 
        of a PM in Slot 12 of the Chassis 
        .  <Help>  This status indicates 
        if a PM is detected in slot 12
         <Condtype> PM_SLOT12_ABSENT <Probcause> 
        other(1) <Alarmtype> other (1)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmboardMgmntSet2 1 }



--- *****************************************************
---     LEAF for the fanMgmnt article
--- *****************************************************
mgnt2AlmfanMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 20 }




mgnt2AlmFanFilterAbsent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Dust Filter Presence :This OID 
        indicates that the dust filter
         is not present<Help>  This alarm 
        indicates if the Dust Filter is 
        detected in the chassis. <Condtype> 
        FAN_FILTER_ABSENT <Probcause> other(1) 
        <Alarmtype> equipmentAlarm (5)
         <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 16 }



mgnt2AlmPbFan6Fail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Unit #6 Failed On Fan Module 
        :This OID indicates a failure on 
        fan 6. Removal of the fan unit
         or no rotation sets the OID. 
         <Help>  This alarm indicates if 
        the FAN #6 is in fail condition 
        <Condtype> PB_FAN6_FAIL <Probcause> 
        heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 7 }



mgnt2AlmPbFan5Fail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Unit #5 Failed On Fan Module 
        :This OID indicates a failure on 
        fan 5. Removal of the fan unit
         or no rotation sets the OID. 
         <Help>  This alarm indicates if 
        the FAN #5 is in fail condition 
        <Condtype> PB_FAN5_FAIL <Probcause> 
        heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 6 }



mgnt2AlmPbFan4Fail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Unit #4 Failed On Fan Module 
        :This OID indicates a failure on 
        fan 4. Removal of the fan unit
         or no rotation sets the OID. 
         <Help>  This alarm indicates if 
        the FAN #4 is in fail condition 
        <Condtype> PB_FAN4_FAIL <Probcause> 
        heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 5 }



mgnt2AlmPbFan3Fail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Unit #3 Failed On Fan Module 
        :This OID indicates a failure on 
        fan 3. Removal of the fan unit
         or no rotation sets the OID. 
         <Help>  This alarm indicates if 
        the FAN #3 is in fail condition 
        <Condtype> PB_FAN3_FAIL <Probcause> 
        heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 4 }



mgnt2AlmPbFan2Fail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Unit #2 Failed On Fan Module 
        :This OID indicates a failure on 
        fan 2. Removal of the fan unit
         or no rotation sets the OID. 
         <Help>  This alarm indicates if 
        the FAN #2 is in fail condition 
        <Condtype> PB_FAN2_FAIL <Probcause> 
        heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 3 }



mgnt2AlmPbFan1Fail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Unit #1 Failed On Fan Module 
        :This OID indicates a failure on 
        fan 1. Removal of the fan unit
         or no rotation sets the OID. 
         <Help>  This alarm indicates if 
        the FAN #1 is in fail condition 
        <Condtype> PB_FAN1_FAIL <Probcause> 
        heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanMgmnt 2 }



--- *****************************************************
---     LEAF for the fanPwrMgmnt article
--- *****************************************************
mgnt2AlmfanPwrMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 24 }




mgnt2AlmFanDefFuseB OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Fuse B Fail :This OID indicates 
        that the fuse of the power input 
        B is in fail condition on the Fan 
        board  <Help>  Status of the FAN 
        Fuse B <Condtype> FAN_DEF_FUSE_B 
        <Probcause> powerProblem (36) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmfanPwrMgmnt 16 }



mgnt2AlmFanDefFuseA OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Fuse A Fail :This OID indicates 
        that the fuse of the power input 
        A is in fail condition on the Fan 
        board  <Help>  Status of the FAN 
        Fuse A <Condtype> FAN_DEF_FUSE_A 
        <Probcause> powerProblem (36) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmfanPwrMgmnt 15 }



mgnt2AlmFanPwrFail1 OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Main Power :This OID indicates 
        a failure on the main power of
          the FAN module  <Help>  This
         alarm indicates if one of the
         tow main power convert of the
         FAN module is in fail condition 
        <Condtype> FAN_PWR_FAIL_1 <Probcause> 
        powerProblem (36) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmfanPwrMgmnt 13 }



mgnt2AlmFanPwrProtOn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Fan Backup Power :This OID indicates 
        the backup power on the FAN module 
        is switched on <Condtype> FAN_PWR_PROT_ON 
        <Probcause> powerProblem (36) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmfanPwrMgmnt 12 }



--- *****************************************************
---     LEAF for the removeablefanModuleFail article
--- *****************************************************
mgnt2AlmremoveablefanModuleFail OBJECT IDENTIFIER ::= { mgnt2alarms 25 }




mgnt2AlmFan4ModuleAbsent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #4 Present In Chassis 
        :This OID indicates the presence 
        of the FAN module #4 in the Chassis.<Help> 
         This alarm indicates if the FAN 
        module #4 is detected in the chassis. 
        <Condtype> FAN4_MODULE_ABSENT <Probcause> 
        other(1) <Alarmtype> equipmentAlarm 
        (5)  <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveablefanModuleFail 4 }



mgnt2AlmFan3ModuleAbsent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #3 Present In Chassis 
        :This OID indicates the presence 
        of the FAN module #3 in the Chassis.<Help> 
         This alarm indicates if the FAN 
        module #3 is detected in the chassis. 
        <Condtype> FAN3_MODULE_ABSENT <Probcause> 
        other(1) <Alarmtype> equipmentAlarm 
        (5)  <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveablefanModuleFail 3 }



mgnt2AlmFan2ModuleAbsent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #2 Present In Chassis 
        :This OID indicates the presence 
        of the FAN module #2 in the Chassis.<Help> 
         This alarm indicates if the FAN 
        module #2 is detected in the chassis. 
        <Condtype> FAN2_MODULE_ABSENT <Probcause> 
        other(1) <Alarmtype> equipmentAlarm 
        (5)  <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveablefanModuleFail 2 }



mgnt2AlmFan1ModuleAbsent OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #1 Present In Chassis 
        :This OID indicates the presence 
        of the FAN module #1 in the Chassis.<Help> 
         This alarm indicates if the FAN 
        module #1 is detected in the chassis. 
        <Condtype> FAN1_MODULE_ABSENT <Probcause> 
        other(1) <Alarmtype> equipmentAlarm 
        (5)  <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveablefanModuleFail 1 }



--- *****************************************************
---     LEAF for the removeableFanModuleMgmnt article
--- *****************************************************
mgnt2AlmremoveableFanModuleMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 26 }




mgnt2AlmFan4ModuleFail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #4 Failure :This OID 
        indicates a failure on FAN module 
        #4 <Help>  This alarm indicates 
        if the FAN module #4 is in fail 
        condition <Condtype> FAN4_MODULE_FAIL 
        <Probcause> heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveableFanModuleMgmnt 4 }



mgnt2AlmFan3ModuleFail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #3 Failure :This OID 
        indicates a failure on FAN module 
        #3 <Help>  This alarm indicates 
        if the FAN module #3 is in fail 
        condition <Condtype> FAN3_MODULE_FAIL 
        <Probcause> heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveableFanModuleMgmnt 3 }



mgnt2AlmFan2ModuleFail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #2 Failure :This OID 
        indicates a failure on FAN module 
        #2 <Help>  This alarm indicates 
        if the FAN module #2 is in fail 
        condition <Condtype> FAN2_MODULE_FAIL 
        <Probcause> heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveableFanModuleMgmnt 2 }



mgnt2AlmFan1ModuleFail OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        FAN Module #1 Failure :This OID 
        indicates a failure on FAN module 
        #1 <Help>  This alarm indicates 
        if the FAN module #1 is in fail 
        condition <Condtype> FAN1_MODULE_FAIL 
        <Probcause> heatingVentCoolingSystemProblem 
        (22) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmremoveableFanModuleMgmnt 1 }



--- *****************************************************
---     LEAF for the swAlarm1 article
--- *****************************************************
mgnt2AlmswAlarm1 OBJECT IDENTIFIER ::= { mgnt2alarms 32 }




mgnt2AlmPollingManagerError OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Polling Manager fail :This OID 
        indicates a failure on the Manager 
        polling the PM's     <Help>   
         <Help>  This alarm indicates if 
        there is a polling manager failure 
        between the MGNT and the Pm's <Condtype> 
        POLLING_MANAGER_ERROR <Probcause> 
        adapterError (2) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmswAlarm1 3 }



mgnt2AlmFifoCmdError OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        SNMP Agent to Transport comm FIFO 
        fail :This OID indicates a failure 
        inside the FIFO stack. The FIFO 
        containing     the messages from 
        the agent (write) to the PMs is 
        full      <Help>  This alarm indicates 
        if there is a communication mismatch 
        between the MGNT board and all
         PM <Condtype> FIFO_CMD_ERROR <Probcause> 
        adapterError (2) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmswAlarm1 2 }



mgnt2AlmApiError OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Comm fail between Agent and Transport 
        :This OID indicates a failure detected 
        on the Agent.The failure    is
         located on a communication process 
        with the modules.     <Help>  This 
        alarm indicates if there is a communication 
        mismatch between the MGNT board 
        and a single PM <Condtype> API_ERROR 
        <Probcause> adapterError (2) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmswAlarm1 1 }



--- *****************************************************
---     LEAF for the apiErrorCode article
--- *****************************************************

mgnt2AlmapiErrorCode OBJECT-TYPE
	  SYNTAX INTEGER (0..255)
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        API Error Identification :Error 
        number and description of the abs1AlmApiError 
        object <Condtype> API_ERROR_CODE_1 
        <Probcause>  <Alarmtype>
        "
	  ::= { mgnt2alarms 33 }



--- *****************************************************
---     LEAF for the logMgmnt article
--- *****************************************************
mgnt2AlmlogMgmnt OBJECT IDENTIFIER ::= { mgnt2alarms 34 }




mgnt2AlmLog80Full OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Log File Full Warning :This OID 
        indicates that a log file is 80% 
        full.  <Help>  This alarm indicates 
        that one of the log file is 80% 
        Full <Condtype> LOG_80_FULL <Probcause> 
        fileError (18) <Alarmtype> equipmentAlarm 
        (5) <Polarity> (2) 
        "
	  ::= { mgnt2AlmlogMgmnt 2 }



mgnt2AlmLogFileFull OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        Log File Full Alarm :This OID
         indicates that a log file is full. 
        This file must be cleared to insure 
        correct log function  <Help>  This 
        alarm indicates that one of the 
        log file is Full <Condtype> LOG_FILE_FULL 
        <Probcause> fileError (18) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmlogMgmnt 1 }



--- *****************************************************
---     LEAF for the ntpSyncLoss article
--- *****************************************************
mgnt2AlmntpSyncLoss OBJECT IDENTIFIER ::= { mgnt2alarms 35 }




mgnt2AlmCpuTempOverRange OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        CPU HighTemperature Warning :This 
        OID indicates a temperature over 
        the expected range on the CPU<Help> 
         This warning indicates that the 
        temperature of the CPU is reaching 
        its internal limit <Condtype> CPU_TEMP_OVER_RANGE 
        <Probcause> other(1) <Alarmtype> 
        equipmentAlarm (5) <Polarity> (2)
        "
	  ::= { mgnt2AlmntpSyncLoss 2 }



mgnt2AlmNtpSyncLoss OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-only
	  STATUS current
	  DESCRIPTION
        "
        NTP Sync Loss  :This OID indicates 
        a loss of synchronisation with
         the NTP Server.  <Help>  This
         alarm indicates a loss of synchronisation 
        with the NTP Server. <Condtype> 
        NTP_SYNC_LOSS <Probcause> timingProblem 
        (53) <Alarmtype> timeDomainViolation 
        (11) <Polarity> (2) 
        "
	  ::= { mgnt2AlmntpSyncLoss 1 }








--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
---     CONTROLS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************



--- *****************************************************
---     LEAF for the synth5 article
--- *****************************************************
mgnt2Ctrlsynth5 OBJECT IDENTIFIER ::= { mgnt2controls 5 }




mgnt2CtrlChassisColdReset OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Cold Reset of the Management Module 
        :This oid triggers a 'cold' reset 
        of the Chassis . This type of reset 
        is not traffic affecting and the 
        modules configuration  remains
         unchanged.   <Help>  This control 
        initiates a cold reset of the MGNT 
        board,
        "
	  ::= { mgnt2Ctrlsynth5 4 }



mgnt2CtrlChassisWarmReset OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Reset of the Management Module 
        :This oid triggers a 'warm' reset 
        of the Chassis . This type of reset 
        is not traffic affecting and the 
        modules configuration  remains
         unchanged.   <Help>  This control 
        initiates a warm reset of the MGNT 
        board,
        "
	  ::= { mgnt2Ctrlsynth5 3 }



mgnt2CtrlChassisShutdown OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Shut Down of the Management Module 
        :This OID shall be set before shutting 
        down the Chassis power. A delay 
        of 5 sec is necessary between this 
        OID is set and power is shut down. 
         <Help>  This control initiates 
        a shutdown of the MGNT board,
        "
	  ::= { mgnt2Ctrlsynth5 2 }



--- *****************************************************
---     LEAF for the testLed article
--- *****************************************************
mgnt2CtrltestLed OBJECT IDENTIFIER ::= { mgnt2controls 18 }




mgnt2CtrlLedOff OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Switch off Leds Test :This OID 
        switches off all the Leds as a
         test feature  <Help>  This control 
        initiates a test leds turning all 
        the LEDs of the complete chassis 
        to OFF
        "
	  ::= { mgnt2CtrltestLed 3 }



mgnt2CtrlRedLed OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Red Leds Test :This OID switches 
        on all the red Leds as a test feature 
         <Help>  This control initiates 
        a test leds turning all the LEDs 
        of the chassis to red
        "
	  ::= { mgnt2CtrltestLed 2 }



mgnt2CtrlGreenLed OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Green Leds Test :This OID switches 
        on all the green Leds as a test 
        feature  <Help>  This control initiates 
        a test leds turning all the LEDs 
        of the chassis to green
        "
	  ::= { mgnt2CtrltestLed 1 }



--- *****************************************************
---     LEAF for the logFile article
--- *****************************************************
mgnt2CtrllogFile OBJECT IDENTIFIER ::= { mgnt2controls 19 }




mgnt2CtrlLogFileReset OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Log File Reset :This OID clears 
        all the log files
        "
	  ::= { mgnt2CtrllogFile 1 }



--- *****************************************************
---     LEAF for the mgntSaveConfig article
--- *****************************************************
mgnt2CtrlmgntSaveConfig OBJECT IDENTIFIER ::= { mgnt2controls 23 }




mgnt2CtrlSaveConfig OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Save Configuration :This OID is 
        used save the configuration related 
        to the enable and mode traps objects 
         <Help>  This control saves the 
        customer configuration on the MGNT 
        board
        "
	  ::= { mgnt2CtrlmgntSaveConfig 1 }



--- *****************************************************
---     LEAF for the mgntGetGlobalConfig article
--- *****************************************************
mgnt2CtrlmgntGetGlobalConfig OBJECT IDENTIFIER ::= { mgnt2controls 24 }




mgnt2CtrlGetGlobalConfig OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Get Global Chassis Config :This 
        OID is used to create a global
         configuration file of the chassis 
         <Help>  This control creates a 
        single configuration file from
         PM's and MGNT configuration file 
        into the RAM
        "
	  ::= { mgnt2CtrlmgntGetGlobalConfig 1 }



--- *****************************************************
---     LEAF for the mgntPutGlobalConfig article
--- *****************************************************
mgnt2CtrlmgntPutGlobalConfig OBJECT IDENTIFIER ::= { mgnt2controls 25 }




mgnt2CtrlPutGlobalConfig OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Put Global Chassis Config :This 
        OID is used to extract a global 
        configuration file of the chassis 
         <Help>  This control creates configuration 
        files  to PM's and MGNT from a
         single configuration file in the 
        RAM
        "
	  ::= { mgnt2CtrlmgntPutGlobalConfig 1 }



--- *****************************************************
---     LEAF for the mgntAcknowledge article
--- *****************************************************
mgnt2CtrlmgntAcknowledge OBJECT IDENTIFIER ::= { mgnt2controls 26 }




mgnt2CtrlAcknowledge OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Alarm Ack. :This OID is used to 
        acknowledge the current active
         alarms of the chassis    <Help> 
          This control is used to acknowledge 
        the current active alarms of the 
        chassis
        "
	  ::= { mgnt2CtrlmgntAcknowledge 1 }








--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
---     CONFIG
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************



--- *****************************************************
---     LEAF for the ethPort2 article
--- *****************************************************
mgnt2CfgethPort2 OBJECT IDENTIFIER ::= { mgnt2config 17 }




mgnt2CfgChassisEthernetSplit OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Chassis Ethernet Split  :This
         OID enables the split between
         the two kendings.  <Help>  Enable/Disable 
         the switch between the two kendings
        "
	  ::= { mgnt2CfgethPort2 2 }



mgnt2CfgEthPort2Disable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        2nd Ethernet Port Disable :This 
        OID disables  'Ethernet Port 2' 
        .When  not required, this port
         must be disabled  in order to
         prevent unwanted access.  <Help> 
         Disable the second Ethernet port
        "
	  ::= { mgnt2CfgethPort2 1 }



--- *****************************************************
---     LEAF for the mgntDccEnable article
--- *****************************************************

mgnt2CfgmgntDccEnable OBJECT-TYPE
	  SYNTAX Mgnt2DccAccessValues
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        DCC Access :This OID selects 
         the mode to enable the DCC on
         the slots. This Mode enables the 
        Slots 2-4-6-8-10 , or the Slots 
        2-6-10-14-18.  <Help>  Defines
         the DCC access on the backplane 
        of the chassis (Slots 2-4-6-8-10 
        or Slots 2-6-10-14-18)
        "
	  ::= { mgnt2config 18 }



--- *****************************************************
---     LEAF for the pmTrapEnable article
--- *****************************************************
mgnt2CfgpmTrapEnable OBJECT IDENTIFIER ::= { mgnt2config 20 }




mgnt2CfgPmConfigTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Config Traps Enable :This OID, 
        when set, enables the generation 
        of a trap when the configuration 
        of a PM plugged in the chassis
         is modified  <Help>  In detailed 
        traps mechanism, enable the trap 
        emission on PM configuration modificatio
        "
	  ::= { mgnt2CfgpmTrapEnable 6 }



mgnt2CfgPmControlTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Control Traps Enable :This OID, 
        when set, enables the generation 
        of a trap when a control is sent 
        to a PM plugged in the chassis
           
  <Help>  In detailed traps 
        mechanism, enable the trap emission 
        on control sent to PM
        "
	  ::= { mgnt2CfgpmTrapEnable 5 }



mgnt2CfgPmMinorTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Minor Alarm Traps Enable :This 
        OID, when set, enables the generation 
        of the minor alarm trap for all 
        the PM plugged in the chassis 
         <Help>  In detailed traps mechanism, 
        enable the trap emission on minor 
        alarm detected on PM
        "
	  ::= { mgnt2CfgpmTrapEnable 3 }



mgnt2CfgPmMajorTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Major Alarm Traps Enable :This 
        OID, when set, enables the generation 
        of the major alarm trap for all 
        the PM plugged in the chassis 
         <Help>  In detailed traps mechanism, 
        enable the trap emission on major 
        alarm detected on PM
        "
	  ::= { mgnt2CfgpmTrapEnable 2 }



mgnt2CfgPmCriticalTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Critical Alarm Traps Enable :This 
        OID, when set, enables the generation 
        of the critical alarm trap for
         all the PM plugged in the chassis 
         <Help>  In detailed traps mechanism, 
        enable the trap emission on critical 
        alarm detected on PM
        "
	  ::= { mgnt2CfgpmTrapEnable 1 }



--- *****************************************************
---     LEAF for the mgntTrapEnable article
--- *****************************************************
mgnt2CfgmgntTrapEnable OBJECT IDENTIFIER ::= { mgnt2config 21 }




mgnt2CfgMgntEventTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        MGNT Event Traps Enable :This
         OID, when set, enables the generation 
        of a trap when an event occurs
         on the chassis  <Help>  In detailed 
        traps mechanism, enable the trap 
        emission on event detected in the 
        chassis
        "
	  ::= { mgnt2CfgmgntTrapEnable 7 }



mgnt2CfgMgntConfigTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        MGNT Config Traps Enable :This 
        OID, when set, enables the generation 
        of a trap when the configuration 
        of a MGNT plugged in the chassis 
        is modified  <Help>  In detailed 
        traps mechanism, enable the trap 
        emission on MGNT configuration
         modification
        "
	  ::= { mgnt2CfgmgntTrapEnable 6 }



mgnt2CfgMgntControlTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        MGNT Control Traps Enable :This 
        OID, when set, enables the generation 
        of a trap when a control is sent 
        to a MGNT plugged in the chassis 
          
  <Help>  In detailed traps
         mechanism, enable the trap emission 
        on control sent to MGNT
        "
	  ::= { mgnt2CfgmgntTrapEnable 5 }



mgnt2CfgMgntMinorTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        MGNT Minor Alarm Traps Enable
         :This OID, when set, enables the 
        generation of the minor alarm trap 
        for the MGNT and FAN board  <Help> 
         In detailed traps mechanism, enable 
        the trap emission on minor alarm 
        detected on MGNT and FAN
        "
	  ::= { mgnt2CfgmgntTrapEnable 3 }



mgnt2CfgMgntMajorTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        MGNT Major Traps Enable :This
         OID, when set, enables the generation 
        of the major alarm trap for the 
        MGNT and FAN board  <Help>  In
         detailed traps mechanism, enable 
        the trap emission on major alarm 
        detected on MGNT and FAN
        "
	  ::= { mgnt2CfgmgntTrapEnable 2 }



mgnt2CfgMgntCriticalTrapEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        MGNT Critical Alarm Traps Enable 
        :This OID, when set, enables the 
        generation of the critical alarm 
        trap for the MGNT and FAN board 
         <Help>  In detailed traps mechanism, 
        enable the trap emission on critical 
        alarm detected on MGNT and FAN
        "
	  ::= { mgnt2CfgmgntTrapEnable 1 }



--- *****************************************************
---     LEAF for the mgntTrapMode article
--- *****************************************************

mgnt2CfgmgntTrapMode OBJECT-TYPE
	  SYNTAX Mgnt2TrapModeValues
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Traps Mode :This OID is used to 
        define the trap mode (synthetic 
        or detailed mode)  <Help>  Selects 
        the traps mechanism
        "
	  ::= { mgnt2config 22 }



--- *****************************************************
---     LEAF for the syslogEnable article
--- *****************************************************
mgnt2CfgsyslogEnable OBJECT IDENTIFIER ::= { mgnt2config 23 }




mgnt2CfgSyslogAlarmEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Syslog Alarm Enable :This OID, 
        when set, enables the generation 
        of a syslog, when an alarm occurs 
         <Help>  Enable a syslog emission 
        on an alarm detected on the chassi
        "
	  ::= { mgnt2CfgsyslogEnable 4 }



mgnt2CfgSyslogCtrlEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Syslog Control Enable :This OID, 
        when set, enables the generation 
        of a syslog, when a control is
         set   <Help>  Enable a syslog
         emission on a control operated 
        on the chassis
        "
	  ::= { mgnt2CfgsyslogEnable 3 }



mgnt2CfgSyslogConfigEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Syslog Config Enable :This OID, 
        when set, enables the generation 
        of a syslog, when the configuration 
        has been changed.   <Help>  Enable 
        a syslog emission on a configuration 
        change detected on the chassis
        "
	  ::= { mgnt2CfgsyslogEnable 2 }



mgnt2CfgSyslogEventEn OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Syslog Event Enable :This OID, 
        when set, enables the generation 
        of a syslog, when an event has
         been detected  <Help>  Enable
         a syslog emission on event detected 
        on the chassis
        "
	  ::= { mgnt2CfgsyslogEnable 1 }



--- *****************************************************
---     LEAF for the ntpTimeZone article
--- *****************************************************

mgnt2CfgntpTimeZone OBJECT-TYPE
	  SYNTAX INTEGER (-12..12)
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        NTP Time Zone  :This OID defines 
        the time zone of the MGNT board 
        for the NTP server  <Help>  This 
        object defines the time zone of 
        the MGNT board (from -12 to +12 
        hours from the GMT).
        "
	  ::= { mgnt2config 24 }



--- *****************************************************
---     LEAF for the pmConfEnable article
--- *****************************************************
mgnt2CfgpmConfEnable OBJECT IDENTIFIER ::= { mgnt2config 25 }




mgnt2CfgPmRestoreEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Automatic Config Restore :This 
        OID enables the automatic PM configuration 
        restore mechanism on PM insertion 
         <Help>  This parameter enables 
        the automatic PM configuration
         restore mechanism on PM insertio
        "
	  ::= { mgnt2CfgpmConfEnable 2 }



mgnt2CfgPmBackupEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Automatic Config Backup :This
         OID enables the automatic PM configuration 
        backup mechanism on PM insertion 
        or PM configuration modification. 
         <Help>  This parameter enables 
        the automatic PM configuration
         backup mechanism on PM insertion 
        or PM configuration modificatio
        "
	  ::= { mgnt2CfgpmConfEnable 1 }



--- *****************************************************
---     LEAF for the inactivityTimeout article
--- *****************************************************

mgnt2CfginactivityTimeout OBJECT-TYPE
	  SYNTAX INTEGER (-1..255)
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Idle Timeout  :This OID defines 
        the idle timeout (in minutes) to 
        automatically logout from the craft 
        and from the CLI.  <Help>  This 
        object defines the idle timeout 
        (in minutes) to automatically logout 
        from the craft and from the CLI
        "
	  ::= { mgnt2config 26 }



--- *****************************************************
---     LEAF for the cliAccess article
--- *****************************************************

mgnt2CfgcliAccess OBJECT-TYPE
	  SYNTAX Mgnt2CliAccessValues
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        CLI access  :This OID selects
         the protocol for the remote access 
        to a CLI user.  <Help>  This object 
        defines the protocol used for a 
        remote CLI.
        "
	  ::= { mgnt2config 27 }



--- *****************************************************
---     LEAF for the craftAccess article
--- *****************************************************

mgnt2CfgcraftAccess OBJECT-TYPE
	  SYNTAX Mgnt2CraftAccessValues
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        CRAFT access :This OID selects 
        the remote access to a CRAFT user. 
         <Help>  This object defines the 
        access for a remote CRAFT.
        "
	  ::= { mgnt2config 28 }



--- *****************************************************
---     LEAF for the perfModes1 article
--- *****************************************************

mgnt2CfgperfModes1 OBJECT-TYPE
	  SYNTAX EkiSynchroMode
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        PERF Synchro Source :This OID
         selects the source of the synchronisation 
        (Internal/External).  <Help>  This 
        object defines the source of the 
        synchronization to operate performance 
        monitoring.
        "
	  ::= { mgnt2config 29 }



--- *****************************************************
---     LEAF for the alarmModelActiv article
--- *****************************************************

mgnt2CfgalarmModelActiv OBJECT-TYPE
	  SYNTAX Mgnt2AckMode
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Acknowledge mode  :This OID defines 
        the alarms akcnowledge mode   <Help> 
         This configuration defines the 
        alarms akcnowledge mode
        "
	  ::= { mgnt2config 30 }



--- *****************************************************
---     LEAF for the networkInput article
--- *****************************************************

mgnt2CfgnetworkInput OBJECT-TYPE
	  SYNTAX Mgnt2NetMode
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Network input :This OID selects 
        the connection of the Ethernet
         Network input to either the switches 
        (2) or the daughter board (1) , 
        in this case the MGNT can act as 
        a router  <Help>   This configuration 
        defines the use of the Network
         input of the front panel
        "
	  ::= { mgnt2config 31 }



--- *****************************************************
---     LEAF for the masterEthMode article
--- *****************************************************

mgnt2CfgmasterEthMode OBJECT-TYPE
	  SYNTAX Mgnt2MasterEthMode
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        DHCP Master Ethernet Mode :This 
        OID selects the mode of the Master 
        Ethernet  in DHCP mode (2) or in 
        Static Mode(1)  <Help>  This configuration 
        defines the use of the Master Ethernet 
        Mode
        "
	  ::= { mgnt2config 32 }



--- *****************************************************
---     LEAF for the subnetMode article
--- *****************************************************

mgnt2CfgsubnetMode OBJECT-TYPE
	  SYNTAX Mgnt2SubnetEthMode
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        DHCP Subnet Mode :This OID selects 
        the mode of the Subnet in DHCP
         mode (2) or in Static Mode(1)
         <Help>  This configuration defines 
        the use of the Subnet Mode
        "
	  ::= { mgnt2config 33 }



--- *****************************************************
---     LEAF for the rstpMode article
--- *****************************************************
mgnt2CfgrstpMode OBJECT IDENTIFIER ::= { mgnt2config 34 }




mgnt2CfgRstpEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        RSTP Enable :This OID enables
         the RSTP algorythm <Help>  This 
        configuration defines the use of 
         RSTP
        "
	  ::= { mgnt2CfgrstpMode 1 }



--- *****************************************************
---     LEAF for the lldpMode article
--- *****************************************************
mgnt2CfglldpMode OBJECT IDENTIFIER ::= { mgnt2config 35 }




mgnt2CfgLldpEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        LLDP Enable :This OID enables
         the LLDP algorythm <Help>  This 
        configuration defines the use of 
         LLDP
        "
	  ::= { mgnt2CfglldpMode 1 }



--- *****************************************************
---     LEAF for the logMode article
--- *****************************************************

mgnt2CfglogMode OBJECT-TYPE
	  SYNTAX Mgnt2LogFileMode
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Log Mode :This OID enables the 
        log file mode<Help>  This configuration 
        defines the use of  the log mod
        "
	  ::= { mgnt2config 36 }



--- *****************************************************
---     LEAF for the nodeMode article
--- *****************************************************
mgnt2CfgnodeMode OBJECT IDENTIFIER ::= { mgnt2config 37 }




mgnt2CfgNodeControllerEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Node Controller Mode :This OID 
        enables the node controller mode<Help> 
         This configuration defines the 
        use of  the node controller mod
        "
	  ::= { mgnt2CfgnodeMode 1 }



--- *****************************************************
---     LEAF for the unprivilegedUsersMode article
--- *****************************************************
mgnt2CfgunprivilegedUsersMode OBJECT IDENTIFIER ::= { mgnt2config 38 }




mgnt2CfgRestrictUnprivilegeUsers OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Restrict Unprivileged Users Rights 
        :This OID enables the restriction 
        of unprivileged user rights to
         modify their own password <Help> 
        This parameter enables the restriction 
        of unprivileged user rights to
         modify their own password
        "
	  ::= { mgnt2CfgunprivilegedUsersMode 1 }



--- *****************************************************
---     LEAF for the oscDccLinkUpThreshold article
--- *****************************************************

mgnt2CfgoscDccLinkUpThreshold OBJECT-TYPE
	  SYNTAX INTEGER (0..255)
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        OSC/DCC Link Up Thresh. [10-30]s 
        :This OID defines the confirmation 
        threshold to consider an OSC/DCC 
        link as up <Help> This parameter 
        defines the confirmation threshold 
        to consider an OSC/DCC link as
         up
        "
	  ::= { mgnt2config 39 }



--- *****************************************************
---     LEAF for the oscDccLinkDownThreshold article
--- *****************************************************

mgnt2CfgoscDccLinkDownThreshold OBJECT-TYPE
	  SYNTAX INTEGER (0..255)
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        OSC/DCC Link Down Thresh. [2-3]s 
        :This OID defines the confirmation 
        threshold to consider an OSC/DCC 
        link as down <Help> This parameter 
        defines the confirmation threshold 
        to consider an OSC/DCC link as
         down.
        "
	  ::= { mgnt2config 40 }



--- *****************************************************
---     LEAF for the accountAutoLock article
--- *****************************************************

mgnt2CfgaccountAutoLock OBJECT-TYPE
	  SYNTAX INTEGER (-1..255)
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Account Auto-Lock [-1 / 1-10]
         err :This OID defines the number 
        of error password to lock an account. 
        This counter is reset on successful 
        login or after an administrator 
        defined period (see Fail count
         reset) Set to -1 to disables the 
        feature.<Help> This parameter defines 
        the number of error password to 
        lock an account. This counter is 
        reset on successful login or after 
        an administrator defined period 
        (see Fail count reset) Set to -1 
        to disables the feature.
        "
	  ::= { mgnt2config 41 }



--- *****************************************************
---     LEAF for the failCountReset article
--- *****************************************************

mgnt2CfgfailCountReset OBJECT-TYPE
	  SYNTAX INTEGER (-1..255)
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        Fail Count Reset [-1 / 1-10] hrs 
        :This OID defines the minimum time 
        (in hours) to reset the failed
         login counter. This counter is 
        also reset on successful login. 
        Set to -1 to disable the feature.<Help> 
        This parameter defines the minimum 
        time (in hours) to reset the failed 
        login counter. This counter is
         also reset on successful login. 
        Set to -1 to disable the feature
        "
	  ::= { mgnt2config 42 }



--- *****************************************************
---     LEAF for the ftpMode article
--- *****************************************************
mgnt2CfgftpMode OBJECT IDENTIFIER ::= { mgnt2config 44 }




mgnt2CfgFtpEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        FTP Enable :This OID enables the 
        FTP protocol  <Help>  This configuration 
        enables the FTP protocol 
        "
	  ::= { mgnt2CfgftpMode 1 }



--- *****************************************************
---     LEAF for the tftpMode article
--- *****************************************************
mgnt2CfgtftpMode OBJECT IDENTIFIER ::= { mgnt2config 45 }




mgnt2CfgTftpEnable OBJECT-TYPE
	  SYNTAX EkiOnOff
	  MAX-ACCESS read-write
	  STATUS current
	  DESCRIPTION
        "
        TFTP Enable :This OID enables
         the TFTP protocol  <Help>  This 
        configuration enables the TFTP
         protocol  
        "
	  ::= { mgnt2CfgtftpMode 1 }








--- *****************************************************
---     TRAPS 
--- *****************************************************

mgnt2TrapBoardNumber OBJECT-TYPE
	SYNTAX INTEGER(1..16)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the slot number of the PM that sent the last trap"
	::= { mgnt2Traps 50 }

mgnt2TrapSeverity OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the trap severity"
	::= { mgnt2Traps 51 }

mgnt2TrapSourcePm OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the mnemonic of the pm who sent a trap"
	::= { mgnt2Traps 52 }

mgnt2TrapSourcePortType OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the type of the port who sent a trap"
	::= { mgnt2Traps 53 }

mgnt2TrapSourcePortNumber OBJECT-TYPE
	SYNTAX INTEGER(1..16)
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the port number of the PM that sent the last trap"
	::= { mgnt2Traps 54 }

mgnt2TrapSourceLabel OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the label of the alarm who sent a trap"
	::= { mgnt2Traps 55 }

mgnt2TrapSourceValue OBJECT-TYPE
	SYNTAX EkiOnOff
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the value of the alarm who sent a trap"
	::= { mgnt2Traps 56 }

mgnt2TrapEventLabel OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the label of the event"
	::= { mgnt2Traps 57 }

mgnt2TrapNodeControllerIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the IP address of the Node Controller"
	::= { mgnt2Traps 58 }

mgnt2TrapChassisId OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION "This OID gives the chassis ID "
	::= { mgnt2Traps 59 }

mgnt2TrapApi NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapBoardNumber,mgnt2AlmapiErrorCode}
	STATUS current
	--&FILTNAME    "API Error"
	--&ACTIONS     { log, minor }
	--&MATCH       { mgnt2TrapBoardNumber "$1", mgnt2AlmapiErrorCode "$2"}
	--&MESG        "API Error number $2 received from Board in slot $1 ($A)"
	DESCRIPTION "Api error trap with its number"
	::= { mgnt2Traps 1 }

mgnt2TrapSwError NOTIFICATION-TYPE
	OBJECTS {mgnt2AlmFifoCmdError}
	STATUS current
	--&FILTNAME    "SW Error"
	--&ACTIONS     { log, minor }
	--&MATCH       { mgnt2AlmFifoCmdError "$1"}
	--&MESG        "Software Error detected"
	DESCRIPTION "Chassis software error other API"
	::= { mgnt2Traps 2 }

mgnt2TrapBoardInserted NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapBoardNumber}
	STATUS current
	--&FILTNAME    "Board Inserted"
	--&ACTIONS     { log, info }
	--&MATCH       { mgnt2TrapBoardNumber "$1"}
	--&MESG        "Board Inserted in Slot $1 ($A)"
	DESCRIPTION "A board has been plugged in"
	::= { mgnt2Traps 4}

mgnt2TrapBoardRemoved NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapBoardNumber}
	STATUS current
	--&FILTNAME    "Board Removed"
	--&ACTIONS     { log, info }
	--&MATCH       { mgnt2TrapBoardNumber "$1"}
	--&MESG        "Board Removed from Slot $1 ($A)"
	DESCRIPTION "A board has been plugged out"
	::= { mgnt2Traps 5 }

mgnt2TrapRestoreConfDone NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapBoardNumber}
	STATUS current
	--&FILTNAME    "Config Restored"
	--&ACTIONS     { log, info }
	--&MATCH       { mgnt2TrapBoardNumber "$1"}
	--&MESG        "The Configuration of Board in Slot $1 has been restored ($A)"
	DESCRIPTION "The Configuration has been restored from the management board"
	::= { mgnt2Traps 6 }

mgnt2TrapGlobalPowerFail NOTIFICATION-TYPE
	OBJECTS {mgnt2AlmDef48b, mgnt2AlmDef48a}
	STATUS current
	--&FILTNAME    "Power A Fail ON"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmDef48b "off", mgnt2AlmDef48a "on"}
	--&MESG        "Power Input A Fail on Chassis ($A)"
	
	--&FILTNAME    "Power B Fail ON"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmDef48b "on", mgnt2AlmDef48a "off"}
	--&MESG        "Power Input B Fail on Chassis ($A)"
	
	--&FILTNAME    "Power A and B Fail OFF"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "Power A Fail ON", "Power B Fail ON"}
	--&MATCH       { mgnt2AlmDef48b "off", mgnt2AlmDef48a "off"}
	--&MESG        "Power Input A and B Present on Chassis ($A)"
	
	DESCRIPTION "A global power supply failure has been detected"
	::= { mgnt2Traps 8 }

mgnt2TrapFanPowerFail NOTIFICATION-TYPE
	OBJECTS {mgnt2AlmFanDefFuseB , mgnt2AlmFanDefFuseA, mgnt2AlmFanPwrFail1}
	STATUS current
	--&FILTNAME    "FAN Fuse A Fail ON"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "on", mgnt2AlmFanPwrFail1 "*"}
	--&MESG        "Power Input A Fail on FAN ($A)"
	
	--&FILTNAME    "FAN Fuse B Fail ON"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmFanDefFuseB "on", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "*"}
	--&MESG        "Power Input B Fail on FAN ($A)"

	--&FILTNAME    "FAN Fuse A and B Fail ON"
	--&ACTIONS     { log, critical }
	--&MATCH       { mgnt2AlmFanDefFuseB "on", mgnt2AlmFanDefFuseA "on", mgnt2AlmFanPwrFail1 "*"}
	--&MESG        "Power Input A and B Fail on FAN ($A)"

	--&FILTNAME    "FAN Fuse A and B Fail OFF"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "FAN Fuse A Fail ON", "FAN Fuse B Fail ON", "FAN Fuse A and B Fail ON"}
	--&MATCH       { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "off"}
	--&MESG        "Power Input A and B Present on FAN ($A)"

	--&FILTNAME    "FAN Power Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmFanDefFuseB "off", mgnt2AlmFanDefFuseA "off", mgnt2AlmFanPwrFail1 "on"}
	--&MESG        "Power Converter Fail on FAN ($A)"

	DESCRIPTION "A Fan power supply failure has been detected"
	::= { mgnt2Traps 9 }

mgnt2TrapGigmPowerFail NOTIFICATION-TYPE
	OBJECTS {mgnt2AlmMgntDefFuseA, mgnt2AlmMgntDefFuseB}
	STATUS current
	--&FILTNAME    "Fuse B Fail ON"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmMgntDefFuseA "off", mgnt2AlmMgntDefFuseB "on"}
	--&MESG        "Power Input B Fail on MGNT ($A)"
	
	--&FILTNAME    "Fuse A Fail ON"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmMgntDefFuseA "on", mgnt2AlmMgntDefFuseB "off"}
	--&MESG        "Power Input A Fail on MGNT ($A)"
	
	--&FILTNAME    "Fuse A and B Fail OFF"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "Fuse B Fail ON", "Fuse A Fail ON"}
	--&MATCH       { mgnt2AlmMgntDefFuseA "off", mgnt2AlmMgntDefFuseB "off"}
	--&MESG        "Power Input A and B Present on MGNT ($A)"
	
	DESCRIPTION "A power supply default has been detected in the management board"
	::= { mgnt2Traps 10 }

mgnt2TrapFanFail NOTIFICATION-TYPE
	OBJECTS {mgnt2AlmPbFan1Fail, mgnt2AlmPbFan2Fail, mgnt2AlmPbFan3Fail, mgnt2AlmPbFan4Fail, mgnt2AlmPbFan5Fail, mgnt2AlmPbFan6Fail}
	STATUS current
	--&FILTNAME    "All trap Fail"
	--&ACTIONS     { log, critical }
	--&MATCH       { mgnt2AlmPbFan1Fail "on", mgnt2AlmPbFan2Fail "on", mgnt2AlmPbFan3Fail "on", mgnt2AlmPbFan4Fail "on", mgnt2AlmPbFan5Fail "on", mgnt2AlmPbFan6Fail "on"}
	--&MESG        "The FAN tray is in Failure condition (all FAN fail) ($A)"

	--&FILTNAME    "FAN 1 Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmPbFan1Fail "on", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
	--&MESG        "Fan number 1 Fail on FAN Module ($A)"

	--&FILTNAME    "FAN 2 Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "on", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
	--&MESG        "Fan number 2 Fail on FAN Module ($A)"

	--&FILTNAME    "FAN 3 Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "on", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
	--&MESG        "Fan number 3 Fail on FAN Module ($A)"

	--&FILTNAME    "FAN 4 Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "on", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "*"}
	--&MESG        "Fan number 4 Fail on FAN Module ($A)"

	--&FILTNAME    "FAN 5 Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "on", mgnt2AlmPbFan6Fail "*"}
	--&MESG        "Fan number 5 Fail on FAN Module ($A)"

	--&FILTNAME    "FAN 6 Fail"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2AlmPbFan1Fail "*", mgnt2AlmPbFan2Fail "*", mgnt2AlmPbFan3Fail "*", mgnt2AlmPbFan4Fail "*", mgnt2AlmPbFan5Fail "*", mgnt2AlmPbFan6Fail "on"}
	--&MESG        "Fan number 6 Fail on FAN Module ($A)"

	--&FILTNAME    "FAN Fail OFF"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "All trap Fail"}
	--&MATCH       { mgnt2AlmPbFan1Fail "off", mgnt2AlmPbFan2Fail "off", mgnt2AlmPbFan3Fail "off", mgnt2AlmPbFan4Fail "off", mgnt2AlmPbFan5Fail "off", mgnt2AlmPbFan6Fail "off"}
	--&MESG        "The FAN tray is fully operational (no FAN fail)"

	DESCRIPTION "A Fan failure has been detected"
	::= { mgnt2Traps 11 }

mgnt2TrapLogFileFull  NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapBoardNumber, mgnt2AlmLog80Full, mgnt2AlmLogFileFull}
	STATUS current
	--&FILTNAME    "Log almost full"
	--&ACTIONS     { log, warning }
	--&MATCH       { mgnt2TrapBoardNumber "$1", mgnt2AlmLog80Full "on", mgnt2AlmLogFileFull "off"}
	--&MESG        "The log of Board in slot $1 is 80% full ($A)"
	
	--&FILTNAME    "Log Full"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2TrapBoardNumber "$1", mgnt2AlmLog80Full "*", mgnt2AlmLogFileFull "on"}
	--&MESG        "The log of Board in slot $1 is Full ($A)"
	DESCRIPTION "Indicates that the corresponding log file is almost full"
	::= { mgnt2Traps 20 }

mgnt2TrapAlarm  NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapSeverity, mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
	STATUS current
	--&FILTNAME    "critical clear"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "critical detect" }
	--&MATCH       { mgnt2TrapSeverity "Critical", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
	--&MESG        "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "critical detect"
	--&ACTIONS     { log, critical }
	--&MATCH       { mgnt2TrapSeverity "Critical", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
	--&MESG        "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "major clear"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "major detect" }
	--&MATCH       { mgnt2TrapSeverity "Major", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
	--&MESG        "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "major detect"
	--&ACTIONS     { log, major }
	--&MATCH       { mgnt2TrapSeverity "Major", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
	--&MESG        "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "minor clear"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "minor detect" }
	--&MATCH       { mgnt2TrapSeverity "Minor", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
	--&MESG        "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "minor detect"
	--&ACTIONS     { log, minor }
	--&MATCH       { mgnt2TrapSeverity "Minor", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
	--&MESG        "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "warning clear"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "warning detect" }
	--&MATCH       { mgnt2TrapSeverity "Warning", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
	--&MESG        "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "warning detect"
	--&ACTIONS     { log, minor }
	--&MATCH       { mgnt2TrapSeverity "Warning", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
	--&MESG        "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "indeterminate clear"
	--&ACTIONS     { log, normal }
	--&CLEARS      { "indeterminate detect" }
	--&MATCH       { mgnt2TrapSeverity "Indeterminate", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "off" }
	--&MESG        "$1 Alarms ($6) cleared on $2 (Slot $3) on $4 ($A)"

	--&FILTNAME    "indeterminate detect"
	--&ACTIONS     { log, minor }
	--&MATCH       { mgnt2TrapSeverity "Indeterminate", mgnt2TrapSourcePm "$2", mgnt2TrapBoardNumber "$3", mgnt2TrapSourcePortType "$4", mgnt2TrapSourcePortNumber "$5", mgnt2TrapSourceLabel "$6", mgnt2TrapSourceValue "on" }
	--&MESG        "$1 Alarms ($6) detected on $2 (Slot $3) on $4 ($A)"
	DESCRIPTION "Indicates that an alarm state has changed"
	::= { mgnt2Traps 30 }

mgnt2TrapEvent  NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapBoardNumber, mgnt2TrapEventLabel, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
	STATUS current
	--&FILTNAME    "event"
	--&ACTIONS     { log, info }
	--&CLEARS      { "critical detect" }
	--&MATCH       {mgnt2TrapBoardNumber "$1", mgnt2TrapEventLabel "$2" }
	--&MESG        "$2 (Slot $1) ($A)"
	DESCRIPTION "Indicates that an event has occured"
	::= { mgnt2Traps 31 }

mgnt2TrapControl NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
	STATUS current
	--&FILTNAME    "control sent"
	--&ACTIONS     { log, info }
	--&MATCH       { mgnt2TrapSourcePm "$1", mgnt2TrapBoardNumber "$2", mgnt2TrapSourcePortType "$3", mgnt2TrapSourcePortNumber "$4", mgnt2TrapSourceLabel "$5" }
	--&MESG        "Controls ($5) has been set to $6 on $1 (Slot $2) on $3 ($A)"

	DESCRIPTION "Indicates that a control has been set to the module"
	::= { mgnt2Traps 32 }

mgnt2TrapConfig NOTIFICATION-TYPE
	OBJECTS {mgnt2TrapSourcePm, mgnt2TrapBoardNumber, mgnt2TrapSourcePortType, mgnt2TrapSourcePortNumber, mgnt2TrapSourceLabel, mgnt2TrapSourceValue, mgnt2TrapNodeControllerIpAddress,mgnt2TrapChassisId}
	STATUS current
	--&FILTNAME    "config sent"
	--&ACTIONS     { log, info }
	--&MATCH       { mgnt2TrapSourcePm "$1", mgnt2TrapBoardNumber "$2", mgnt2TrapSourcePortType "$3", mgnt2TrapSourcePortNumber "$4", mgnt2TrapSourceLabel "$5"}
	--&MESG        "Config Word ($5) has been set to $6 on $1 (Slot $2) on $3 ($A)"

	DESCRIPTION "Indicates that a config word has been changed"
	::= { mgnt2Traps 33 }






END