path: root/MIBS/comware/HH3C-IPSEC-MONITOR-V2-MIB

-- ====================================================================
-- Copyright (c) 2004-2021 New H3C Tech. Co., Ltd.  All rights reserved.
--
-- Description: The MIB is designed to get IPsec tunnels' statistic information.
-- Reference:
-- Version: 1.2
-- History:
--   V1.0: The initial version created by Wanghaisheng and Weiyanheng.
--   V1.1: 2017-10-31 Added hh3cIPsecTunnelStatByDescripV2Table,hh3cIPsecConnectionStopV2,
--         hh3cIPsecConnectionStartV2,hh3cIPsecConnectionStopCntlV2 and
--         hh3cIPsecConnectionStartCntlV2 by shihaohao
--   V1.2: 2021-04-23 Added by Yangbaotao. This revision is about the node
--         Hh3cIPsecEncryptAlgoV2 and Hh3cIPsecAuthAlgoV2.
--         Deprecated hh3cIPsecTunIKETunLocalIDVal1V2,
--         hh3cIPsecTunIKETunRemoteIDVal1V2,added hh3cIPsecTunIKETunLocalIDVal3V2
--         hh3cIPsecTunIKETunRemoteIDVal3V2 by Zhaoming.
-- =====================================================================
HH3C-IPSEC-MONITOR-V2-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        ifIndex
            FROM RFC1213-MIB
        InterfaceIndex
            FROM IF-MIB
        DisplayString, TEXTUAL-CONVENTION, TruthValue
            FROM SNMPv2-TC
        Integer32, Counter32, Counter64, OBJECT-TYPE,
        MODULE-IDENTITY, Gauge32, NOTIFICATION-TYPE, Unsigned32
            FROM SNMPv2-SMI
        InetAddressType, InetAddress
            FROM INET-ADDRESS-MIB
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF
        hh3cCommon
            FROM HH3C-OID-MIB;

    hh3cIPsecMonitorV2 MODULE-IDENTITY
        LAST-UPDATED "202104231730Z"
        ORGANIZATION
            "New H3C Tech. Co., Ltd."
        CONTACT-INFO
            "Platform Team New H3C Tech. Co., Ltd.
            Hai-Dian District Beijing P.R. China
            http://www.h3c.com
            Zip:100085"
        DESCRIPTION
            "The MIB is designed to get statistic information of IPsec tunnels.
             With this MIB, we can get information of a certain tunnel or all
             tunnels."
         REVISION "202104231730Z"
         DESCRIPTION
            "This revision is about the node Hh3cIPsecEncryptAlgoV2
             and Hh3cIPsecAuthAlgoV2.Deprecate hh3cIPsecTunIKETunLocalIDVal1V2,
             hh3cIPsecTunIKETunRemoteIDVal1V2, add hh3cIPsecTunIKETunLocalIDVal3V2
             and hh3cIPsecTunIKETunRemoteIDVal3V2."
         REVISION "201710311650Z"
         DESCRIPTION
            "Add the objects of hh3cIPsecTunnelStatByDescripV2Table,hh3cIPsecConnectionStopV2,
            hh3cIPsecConnectionStartV2,hh3cIPsecConnectionStopCntlV2 and
            hh3cIPsecConnectionStartCntlV2."
        REVISION
            "201206270000Z"
        DESCRIPTION
            "Initial version."
        ::= { hh3cCommon 126 }

    Hh3cIPsecDiffHellmanGrpV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The Diffie Hellman Group used in the IKE and IPsec negotiations.
             invalidGroup(2147483647) is defined as invalid value."
        SYNTAX INTEGER {
            none(0),
            dhGroup1(1),
            dhGroup2(2),
            dhGroup5(5),
            dhGroup14(14),
            dhGroup24(24),
            invalidGroup(2147483647)
        }

    Hh3cIPsecEncapModeV2        ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The encapsulation mode used by an IPsec Phase-2 Tunnel.
             invalidMode(2147483647) is defined as invalid value."
        SYNTAX INTEGER {
            tunnel(1),
            transport(2),
            invalidMode(2147483647)
        }

    Hh3cIPsecEncryptAlgoV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The encryption algorithm used in the IKE and IPsec negotiations.
             invalidAlg(2147483647) is defined as invalid value."
        SYNTAX INTEGER {
            none(0),
            desCbc(1),
            ideaCbc(2),
            blowfishCbc(3),
            rc5R16B64Cbc(4),
            tripleDesCbc(5),
            castCbc(6),
            aesCbc(7),
            nsaCbc(8),
            aesCbc128(9),
            aesCbc192(10),
            aesCbc256(11),
            aesCtr(12),
            aesCamelliaCbc(13),
            rc4(14),
            sm1Cbc128(128),
            sm1Cbc192(129),
            sm1Cbc256(130),
            sm4Cbc(131),
            invalidAlg(2147483647)
        }

    Hh3cIPsecAuthAlgoV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The authentication algorithm used in the IKE negotiations.
             invalidAlg(2147483647) is defined as invalid value."
        SYNTAX INTEGER {
            none(0),
            md5(1),
            sha1(2),
            sha256(3),
            sha384(4),
            sha512(5),
            sm3(128),
            invalidAlg(2147483647)
        }

    Hh3cIPsecSaProtocolV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The protocol of security association."
        SYNTAX INTEGER {
            reserved(0),
            ah(2),
            esp(3),
            ipcomp(4)
        }

    Hh3cIPsecIDTypeV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The type of IPsec Identity."
        SYNTAX INTEGER {
            reserved(0),
            ipv4Addr(1),
            fqdn(2),         -- fully-qualified domain name
            userFqdn(3),     -- fully-qualified username
            ipv4AddrSubnet(4),
            ipv6Addr(5),
            ipv6AddrSubnet(6),
            ipv4AddrRange(7),
            ipv6AddrRange(8),
            derAsn1Dn(9),    -- the binary DER encoding of an ASN.1 X.500 Distinguished
                             -- Name [X.501] of the princIPal whose certificates are
                             -- being exchanged to establish the SA.
            derAsn1Gn(10),   -- the binary DER encoding of an ASN.1 X.500 GeneralName
                             -- [X.509] of the princIPal whose certificates are being
                             -- exchanged to establish the SA.
            keyId(11)        -- specifies an opaque byte stream which may be used to
                             -- pass vendor-specific information necessary to identify
                             -- which pre-shared key should be used to authenticate
                             -- Aggressive mode negotiations.
        }

    Hh3cIPsecTrafficTypeV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The type of the data flow."
        SYNTAX INTEGER {
            ipv4Addr(1),
            ipv4AddrSubnet(4),
            ipv6Addr(5),
            ipv6AddrSubnet(6),
            ipv4AddrRange(7),
            ipv6AddrRange(8)
        }

    Hh3cIPsecNegoTypeV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The type of key used by an IPsec Phase-2 Tunnel.
            invalidType(2147483647) is defined as invalid value."
        SYNTAX INTEGER {
            ike(1),
            manual(2),
            invalidType(2147483647)
        }

    Hh3cIPsecTunnelStateV2   ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
            "The state of IPsec tunnel."
        SYNTAX INTEGER {
            active(1),
            timeout(2)
        }

-- ========================================================================
-- Node definitions
-- ========================================================================
-- Begin the node of hh3cIPsecObjectsV2.

    hh3cIPsecObjectsV2 OBJECT IDENTIFIER ::= { hh3cIPsecMonitorV2 1 }

-- =======================================
-- Begin the hh3cIPsecScalarObjectsV2.
-- =======================================
    hh3cIPsecScalarObjectsV2 OBJECT IDENTIFIER ::= { hh3cIPsecObjectsV2 1 }

    hh3cIPsecMIBVersion OBJECT-TYPE
        SYNTAX DisplayString(SIZE(0..255))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Version string of this MIB."
        ::= { hh3cIPsecScalarObjectsV2 1 }

-- ===============================================
-- Begin the table of hh3cIPsecTunnelV2Table.
-- ===============================================

    hh3cIPsecTunnelV2Table OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cIPsecTunnelV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IPsec Phase-2 Tunnel Table.  There is one entry in this
             table for each active IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecObjectsV2 2 }

    hh3cIPsecTunnelV2Entry OBJECT-TYPE
        SYNTAX Hh3cIPsecTunnelV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Information about hh3cIPsecTunnelV2Table."
        INDEX { hh3cIPsecTunIndexV2 }
        ::= { hh3cIPsecTunnelV2Table 1 }

    Hh3cIPsecTunnelV2Entry ::=
        SEQUENCE {
            hh3cIPsecTunIndexV2
                Integer32,
            hh3cIPsecTunIfIndexV2
                InterfaceIndex,
            hh3cIPsecTunIKETunnelIndexV2
                Integer32,
            hh3cIPsecTunIKETunLocalIDTypeV2
                Hh3cIPsecIDTypeV2,
            hh3cIPsecTunIKETunLocalIDVal1V2
                DisplayString,
            hh3cIPsecTunIKETunLocalIDVal2V2
                DisplayString,
            hh3cIPsecTunIKETunRemoteIDTypeV2
                Hh3cIPsecIDTypeV2,
            hh3cIPsecTunIKETunRemoteIDVal1V2
                DisplayString,
            hh3cIPsecTunIKETunRemoteIDVal2V2
                DisplayString,
            hh3cIPsecTunLocalAddrTypeV2
                InetAddressType,
            hh3cIPsecTunLocalAddrV2
                InetAddress,
            hh3cIPsecTunRemoteAddrTypeV2
                InetAddressType,
            hh3cIPsecTunRemoteAddrV2
                InetAddress,
            hh3cIPsecTunKeyTypeV2
                Hh3cIPsecNegoTypeV2,
            hh3cIPsecTunEncapModeV2
                Hh3cIPsecEncapModeV2,
            hh3cIPsecTunInitiatorV2
                INTEGER,
            hh3cIPsecTunLifeSizeV2
                Gauge32,
            hh3cIPsecTunLifeTimeV2
                Integer32,
            hh3cIPsecTunRemainTimeV2
                Integer32,
            hh3cIPsecTunActiveTimeV2
                Integer32,
            hh3cIPsecTunRemainSizeV2
                Gauge32,
            hh3cIPsecTunTotalRefreshesV2
                Counter32,
            hh3cIPsecTunCurrentSaInstancesV2
                Gauge32,
            hh3cIPsecTunInSaEncryptAlgoV2
                Hh3cIPsecEncryptAlgoV2,
            hh3cIPsecTunInSaAhAuthAlgoV2
                Hh3cIPsecAuthAlgoV2,
            hh3cIPsecTunInSaEspAuthAlgoV2
                Hh3cIPsecAuthAlgoV2,
            hh3cIPsecTunDiffHellmanGrpV2
                Hh3cIPsecDiffHellmanGrpV2,
            hh3cIPsecTunOutSaEncryptAlgoV2
                Hh3cIPsecEncryptAlgoV2,
            hh3cIPsecTunOutSaAhAuthAlgoV2
                Hh3cIPsecAuthAlgoV2,
            hh3cIPsecTunOutSaEspAuthAlgoV2
                Hh3cIPsecAuthAlgoV2,
            hh3cIPsecTunPolicyNameV2
                OCTET STRING,
            hh3cIPsecTunPolicyNumV2
                Integer32,
            hh3cIPsecTunStatusV2
                INTEGER,
            hh3cIPsecTunPolicyDescriptionV2
                OCTET STRING,
            hh3cIPsecTunIKETunLocalIDVal3V2
                OCTET STRING,
            hh3cIPsecTunIKETunRemoteIDVal3V2
                OCTET STRING
        }

    hh3cIPsecTunIndexV2 OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The index of IPsec Phase-2 Tunnel Table.  The value of
             the index is a number which begins at one and is
             incremented with each tunnel that is created.  The
             value of this object will wrap at 2147483647."
        ::= { hh3cIPsecTunnelV2Entry 1 }

    hh3cIPsecTunIfIndexV2 OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The interface index( the ifIndex of ifTable )."
        ::= { hh3cIPsecTunnelV2Entry 2 }

    hh3cIPsecTunIKETunnelIndexV2 OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The index of the associated IPsec Phase-1 IKE Tunnel
             (IKETunIndex in the IKETunnelTable).  2147483647 is defined as
             invalid value."
        ::= { hh3cIPsecTunnelV2Entry 3 }

    hh3cIPsecTunIKETunLocalIDTypeV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecIDTypeV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the local peer identity for the associated IPsec
             Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable)."
        ::= { hh3cIPsecTunnelV2Entry 4 }

    hh3cIPsecTunIKETunLocalIDVal1V2 OBJECT-TYPE
        SYNTAX DisplayString(SIZE(0..255))
        MAX-ACCESS read-only
        STATUS deprecated
        DESCRIPTION
            "The value of the local peer identity for the associated IPsec
             Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).

             If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
             used to identify the local peer.

             If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
             the subnet address.

             If the local peer type is ipv4AddrRange/ipv6AddrRange, this is
             the beginning IP address of the range.

             If the local peer type is fqdn/userFqdn, this is the host name
             used to identify the local peer.

             If the local peer type is derAsn1Dn, this is the binary DER
             encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
             principal whose certificates are being exchanged to establish
             the SA.

             If the local peer type is derAsn1Gn, this is the binary DER
             encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
             whose certificates are being exchanged to establish the SA.

             If the local peer type is keyId, this is an opaque byte
             stream which may be used to pass vendor-specific information
             necessary to identify which pre-shared key should be used to
             authenticate Aggressive mode negotiations.

             The local peer identity may not exceed 255 characters in length.
             The complete value will be displayed by hh3cIPsecTunIKETunLocalIDVal3V2"
        ::= { hh3cIPsecTunnelV2Entry 5 }

    hh3cIPsecTunIKETunLocalIDVal2V2 OBJECT-TYPE
        SYNTAX DisplayString(SIZE(0..255))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second specification of the local peer's IP address for the
             associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the
             IKETunnelTable).

             If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
             is the subnet mask.

             If the local peer type is ipv4AddrRange/ipv6AddrRange, this is
             the ending IP address of the range.

             If the local peer type is others, this is a zero-length string."
        ::= { hh3cIPsecTunnelV2Entry 6 }

    hh3cIPsecTunIKETunRemoteIDTypeV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecIDTypeV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the remote peer identity for the associated IPsec
             Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable)."
        ::= { hh3cIPsecTunnelV2Entry 7 }

    hh3cIPsecTunIKETunRemoteIDVal1V2 OBJECT-TYPE
        SYNTAX DisplayString(SIZE(0..255))
        MAX-ACCESS read-only
        STATUS deprecated
        DESCRIPTION
            "The value of the remote peer identity for the associated IPsec
             Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).

             If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
             used to identify the remote peer.

             If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
             the subnet address.

             If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
             the beginning IP address of the range.

             If the remote peer type is fqdn/userFqdn, this is the host name
             used to identify the remote peer.

             If the remote peer type is derAsn1Dn, this is the binary DER
             encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
             principal whose certificates are being exchanged to establish
             the SA.

             If the remote peer type is derAsn1Gn, this is the binary DER
             encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
             whose certificates are being exchanged to establish the SA.

             If the remote peer type is keyId, this is an opaque byte
             stream which may be used to pass vendor-specific information
             necessary to identify which pre-shared key should be used to
             authenticate Aggressive mode negotiations.

             The remote peer identity may not exceed 255 characters in length.
             The complete value will be displayed by hh3cIPsecTunIKETunRemoteIDVal3V2"
        ::= { hh3cIPsecTunnelV2Entry 8 }

    hh3cIPsecTunIKETunRemoteIDVal2V2 OBJECT-TYPE
        SYNTAX DisplayString(SIZE(0..255))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second specification of the remote peer's IP address for the
             associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the
             IKETunnelTable).

             If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
             is the subnet mask.

             If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
             the ending IP address of the range.

             If the remote peer type is others, this is a zero-length string."
        ::= { hh3cIPsecTunnelV2Entry 9 }

    hh3cIPsecTunLocalAddrTypeV2 OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the IP address for the local peer of the IPsec Phase-2
            Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 10 }

    hh3cIPsecTunLocalAddrV2 OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The IP address of the local peer for the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 11 }

    hh3cIPsecTunRemoteAddrTypeV2 OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the IP address for the remote peer of the IPsec Phase-2
             Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 12 }

    hh3cIPsecTunRemoteAddrV2 OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The IP address of the remote peer for the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 13 }

    hh3cIPsecTunKeyTypeV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecNegoTypeV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The key negotiate mode used by the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 14 }

    hh3cIPsecTunEncapModeV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecEncapModeV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The encapsulation mode used by the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 15 }

    hh3cIPsecTunInitiatorV2 OBJECT-TYPE
        SYNTAX INTEGER
            {
                local(1),
                remote(2),
                none(2147483647)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The initiator of this IPsec tunnel.  Value none is used for manual
             IPsec tunnel, for there is no initiator or responder in this method."
        ::= { hh3cIPsecTunnelV2Entry 16 }

    hh3cIPsecTunLifeSizeV2 OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
             0 is defined as invalid value."
        ::= { hh3cIPsecTunnelV2Entry 17 }

    hh3cIPsecTunLifeTimeV2 OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
             2147483647 is defined as invalid value."
        ::= { hh3cIPsecTunnelV2Entry 18 }

    hh3cIPsecTunRemainTimeV2 OBJECT-TYPE
        SYNTAX Integer32 (0..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The remain time of SA in seconds.  2147483647 is defined as invalid
            value."
        ::= { hh3cIPsecTunnelV2Entry 19 }

    hh3cIPsecTunActiveTimeV2 OBJECT-TYPE
        SYNTAX Integer32 (0..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The duration the IPsec Phase-2 Tunnel has been active in
             hundredths of seconds.  2147483647 is defined as invalid value."
        ::= { hh3cIPsecTunnelV2Entry 20 }

    hh3cIPsecTunRemainSizeV2 OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The remain LifeSize of SA in kilobytes.  0 is defined as
            invalid value."
        ::= { hh3cIPsecTunnelV2Entry 21 }

    hh3cIPsecTunTotalRefreshesV2 OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of security association refreshing performed."
        ::= { hh3cIPsecTunnelV2Entry 22 }

    hh3cIPsecTunCurrentSaInstancesV2 OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The number of security associations which are currently active
             or expiring."
        ::= { hh3cIPsecTunnelV2Entry 23 }

    hh3cIPsecTunInSaEncryptAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecEncryptAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The encryption algorithm used by the inbound security association
             of the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 24 }

    hh3cIPsecTunInSaAhAuthAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecAuthAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The authentication algorithm used by the inbound authentication
             header (AH) security association of the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 25 }

    hh3cIPsecTunInSaEspAuthAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecAuthAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The authentication algorithm used by the inbound encapsulation
             security protocol(ESP) security association of the IPsec
             Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 26 }

    hh3cIPsecTunDiffHellmanGrpV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecDiffHellmanGrpV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The Diffie Hellman Group used by the security association of the
             IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 27 }

    hh3cIPsecTunOutSaEncryptAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecEncryptAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The encryption algorithm used by the outbound security
             association of the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 28 }

    hh3cIPsecTunOutSaAhAuthAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecAuthAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The authentication algorithm used by the outbound
             authentication header (AH) security association of
             the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 29 }

    hh3cIPsecTunOutSaEspAuthAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecAuthAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The authentication algorithm used by the outbound encapsulation
             security protocol(ESP) security association of the IPsec
             Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 30 }

    hh3cIPsecTunPolicyNameV2 OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(1..63))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The policy name used by this IPsec tunnel."
        ::= { hh3cIPsecTunnelV2Entry 31 }

    hh3cIPsecTunPolicyNumV2 OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The sequence number of policy used by this IPsec tunnel."
        ::= { hh3cIPsecTunnelV2Entry 32 }

    hh3cIPsecTunStatusV2 OBJECT-TYPE
        SYNTAX INTEGER
            {
                initial(1),
                ready(2),
                rekeyed(3),
                closed(4)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The status of the IPsec Tunnel."
        ::= { hh3cIPsecTunnelV2Entry 33 }

    hh3cIPsecTunPolicyDescriptionV2 OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(1..80))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "IPsec policy description of an IPsec tunne."
        ::= { hh3cIPsecTunnelV2Entry 34 }

    hh3cIPsecTunIKETunLocalIDVal3V2 OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(0..2047))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The value of the local peer identity for the associated IPsec
             Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).

             If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
             used to identify the local peer.

             If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
             the subnet address.

             If the local peer type is ipv4AddrRange/ipv6AddrRange, this is
             the beginning IP address of the range.

             If the local peer type is fqdn/userFqdn, this is the host name
             used to identify the local peer.

             If the local peer type is derAsn1Dn, this is the binary DER
             encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
             principal whose certificates are being exchanged to establish
             the SA.

             If the local peer type is derAsn1Gn, this is the binary DER
             encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
             whose certificates are being exchanged to establish the SA.

             If the local peer type is keyId, this is an opaque byte
             stream which may be used to pass vendor-specific information
             necessary to identify which pre-shared key should be used to
             authenticate Aggressive mode negotiations."
        ::= { hh3cIPsecTunnelV2Entry 35 }

    hh3cIPsecTunIKETunRemoteIDVal3V2 OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(0..2047))
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The value of the remote peer identity for the associated IPsec
             Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).

             If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
             used to identify the remote peer.

             If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
             the subnet address.

             If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
             the beginning IP address of the range.

             If the remote peer type is fqdn/userFqdn, this is the host name
             used to identify the remote peer.

             If the remote peer type is derAsn1Dn, this is the binary DER
             encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
             principal whose certificates are being exchanged to establish
             the SA.

             If the remote peer type is derAsn1Gn, this is the binary DER
             encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
             whose certificates are being exchanged to establish the SA.

             If the remote peer type is keyId, this is an opaque byte
             stream which may be used to pass vendor-specific information
             necessary to identify which pre-shared key should be used to
             authenticate Aggressive mode negotiations."
        ::= { hh3cIPsecTunnelV2Entry 36 }


-- ===============================================
-- Begin the table of hh3cIPsecTunnelStatV2Table.
-- ===============================================

    hh3cIPsecTunnelStatV2Table OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cIPsecTunnelStatV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IPsec Phase-2 Tunnel Statistics Table."
        ::= { hh3cIPsecObjectsV2 3 }

    hh3cIPsecTunnelStatV2Entry OBJECT-TYPE
        SYNTAX Hh3cIPsecTunnelStatV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Information about hh3cIPsecTunnelStatV2Table."
        INDEX { hh3cIPsecTunIndexV2 }
        ::= { hh3cIPsecTunnelStatV2Table 1 }

    Hh3cIPsecTunnelStatV2Entry ::=
        SEQUENCE {
            hh3cIPsecTunInOctetsV2
                Counter64,
            hh3cIPsecTunInDecompOctetsV2
                Counter64,
            hh3cIPsecTunInPktsV2
                Counter64,
            hh3cIPsecTunInDropPktsV2
                Counter64,
            hh3cIPsecTunInReplayDropPktsV2
                Counter64,
            hh3cIPsecTunInAuthFailsV2
                Counter64,
            hh3cIPsecTunInDecryptFailsV2
                Counter64,
            hh3cIPsecTunOutOctetsV2
                Counter64,
            hh3cIPsecTunOutUncompOctetsV2
                Counter64,
            hh3cIPsecTunOutPktsV2
                Counter64,
            hh3cIPsecTunOutDropPktsV2
                Counter64,
            hh3cIPsecTunOutEncryptFailsV2
                Counter64,
            hh3cIPsecTunNoMemoryDropPktsV2
                Counter64,
            hh3cIPsecTunQueueFullDropPktsV2
                Counter64,
            hh3cIPsecTunInvalidLenDropPktsV2
                Counter64,
            hh3cIPsecTunTooLongDropPktsV2
                Counter64,
            hh3cIPsecTunInvalidSaDropPktsV2
                Counter64
        }

    hh3cIPsecTunInOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of octets received by this IPsec Phase-2 Tunnel.
             This value is accumulated BEFORE determining whether or not the
             packet should be decompressed."
        ::= { hh3cIPsecTunnelStatV2Entry 1 }

    hh3cIPsecTunInDecompOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of decompressed octets received by this IPsec
             Phase-2 Tunnel.  This value is accumulated AFTER the packet
             is decompressed."
        ::= { hh3cIPsecTunnelStatV2Entry 2 }

    hh3cIPsecTunInPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets received by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 3 }

    hh3cIPsecTunInDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped during receiving process
             by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 4 }

    hh3cIPsecTunInReplayDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped during
             receiving process due to Anti-Replay process
             by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 5 }

    hh3cIPsecTunInAuthFailsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of inbound authentication's
             which ended in failure by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 6 }

    hh3cIPsecTunInDecryptFailsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of inbound decryption's
             which ended in failure by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 7 }

    hh3cIPsecTunOutOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of octets sent by this IPsec Phase-2 Tunnel.
             This value is accumulated AFTER determining whether or not
             the packet should be compressed."
        ::= { hh3cIPsecTunnelStatV2Entry 8 }

    hh3cIPsecTunOutUncompOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of uncompressed octets sent by this IPsec Phase-2
             Tunnel.  This value is accumulated BEFORE the packet is compressed."
        ::= { hh3cIPsecTunnelStatV2Entry 9 }

    hh3cIPsecTunOutPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets sent by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 10 }

    hh3cIPsecTunOutDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped during sending process
             by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 11 }

    hh3cIPsecTunOutEncryptFailsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of outbound encryption's which ended in failure
             by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 12 }

    hh3cIPsecTunNoMemoryDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to no enough memory by this
             IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 13 }

    hh3cIPsecTunQueueFullDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to queue full by this
             IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 14 }

    hh3cIPsecTunInvalidLenDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to invalid length packet
             by this IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 15 }

    hh3cIPsecTunTooLongDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to too long packet by this
             IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 16 }

    hh3cIPsecTunInvalidSaDropPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to invalid SA by this
             IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecTunnelStatV2Entry 17 }

-- ===============================================
-- Begin the table of hh3cIPsecSaV2Table.
-- ===============================================

    hh3cIPsecSaV2Table OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cIPsecSaV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IPsec Phase-2 Security Protection Index Table.  This table
             contains an entry for each active and expiring security association."
        ::= { hh3cIPsecObjectsV2 4 }

    hh3cIPsecSaV2Entry OBJECT-TYPE
        SYNTAX Hh3cIPsecSaV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Information about hh3cIPsecSaV2Table."
        INDEX { hh3cIPsecTunIndexV2,hh3cIPsecSaIndexV2 }
        ::= { hh3cIPsecSaV2Table 1 }

    Hh3cIPsecSaV2Entry ::=
        SEQUENCE {
            hh3cIPsecSaIndexV2
                Integer32,
            hh3cIPsecSaDirectionV2
                INTEGER,
            hh3cIPsecSaSpiValueV2
                Unsigned32,
            hh3cIPsecSaSecProtocolV2
                Hh3cIPsecSaProtocolV2,
            hh3cIPsecSaEncryptAlgoV2
                Hh3cIPsecEncryptAlgoV2,
            hh3cIPsecSaAuthAlgoV2
                Hh3cIPsecAuthAlgoV2,
            hh3cIPsecSaStatusV2
                INTEGER
        }

    hh3cIPsecSaIndexV2 OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The number of the Sa associated with the Phase-2 Tunnel
             Table.  The value of this index is a number which begins
             at one and is incremented with each Sa associated with
             an IPsec Phase-2 Tunnel.  The value of this object will
             wrap at 2,147,483,647."
        ::= { hh3cIPsecSaV2Entry 1 }

    hh3cIPsecSaDirectionV2 OBJECT-TYPE
        SYNTAX INTEGER {
            in(1),
            out(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The direction of the SA."
        ::= { hh3cIPsecSaV2Entry 2 }

    hh3cIPsecSaSpiValueV2 OBJECT-TYPE
        SYNTAX Unsigned32 (1..4294967295)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The value of the SPI."
        ::= { hh3cIPsecSaV2Entry 3 }

    hh3cIPsecSaSecProtocolV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecSaProtocolV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The security protocol of the SA."
        ::= { hh3cIPsecSaV2Entry 4 }

    hh3cIPsecSaEncryptAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecEncryptAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The encryption algorithm used by the security association
             of the IPsec Phase-2 Tunnel."
        ::= { hh3cIPsecSaV2Entry 5 }

    hh3cIPsecSaAuthAlgoV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecAuthAlgoV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The authentication algorithm used by the SA."
        ::= { hh3cIPsecSaV2Entry 6 }

    hh3cIPsecSaStatusV2 OBJECT-TYPE
        SYNTAX INTEGER {
            active(1),
            expiring(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The status of the SA."
        ::= { hh3cIPsecSaV2Entry 7 }

-- ===============================================
-- Begin the table of hh3cIPsecTrafficV2Table.
-- ===============================================

    hh3cIPsecTrafficV2Table OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cIPsecTrafficV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IPsec Phase-2 Tunnel Traffic Table."
        ::= { hh3cIPsecObjectsV2 5 }

    hh3cIPsecTrafficV2Entry OBJECT-TYPE
        SYNTAX Hh3cIPsecTrafficV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Information about hh3cIPsecTrafficV2Table."
        INDEX { hh3cIPsecTunIndexV2 }
        ::= { hh3cIPsecTrafficV2Table 1 }

    Hh3cIPsecTrafficV2Entry ::=
        SEQUENCE {
            hh3cIPsecTrafficLocalTypeV2
                Hh3cIPsecTrafficTypeV2,
            hh3cIPsecTrafficLocalAddr1TypeV2
                InetAddressType,
            hh3cIPsecTrafficLocalAddr1V2
                InetAddress,
            hh3cIPsecTrafficLocalAddr2TypeV2
                InetAddressType,
            hh3cIPsecTrafficLocalAddr2V2
                InetAddress,
            hh3cIPsecTrafficLocalProtocol1V2
                Integer32,
            hh3cIPsecTrafficLocalProtocol2V2
                Integer32,
            hh3cIPsecTrafficLocalPort1V2
                Integer32,
            hh3cIPsecTrafficLocalPort2V2
                Integer32,
            hh3cIPsecTrafficRemoteTypeV2
                Hh3cIPsecTrafficTypeV2,
            hh3cIPsecTrafficRemAddr1TypeV2
                InetAddressType,
            hh3cIPsecTrafficRemAddr1V2
                InetAddress,
            hh3cIPsecTrafficRemAddr2TypeV2
                InetAddressType,
            hh3cIPsecTrafficRemAddr2V2
                InetAddress,
            hh3cIPsecTrafficRemoPro1V2
                Integer32,
            hh3cIPsecTrafficRemoPro2V2
                Integer32,
            hh3cIPsecTrafficRemPort1V2
                Integer32,
            hh3cIPsecTrafficRemPort2V2
                Integer32
    }

    hh3cIPsecTrafficLocalTypeV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecTrafficTypeV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the local peer's traffic.  Possible values are:
            1) A single IP address
            2) An IP address range
            3) An IP subnet"
        ::= { hh3cIPsecTrafficV2Entry 1 }

    hh3cIPsecTrafficLocalAddr1TypeV2 OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the first IP address specification for the local peer's
             traffic."
        ::= { hh3cIPsecTrafficV2Entry 2 }

    hh3cIPsecTrafficLocalAddr1V2 OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first IP address specification of the local peer's traffic.

            If the local peer's traffic type is single IP address, this is the
            IP address.

            If the local peer's traffic type is IP subnet, this is the subnet address.

            If the local peer's traffic type is IP address range, this is the
            beginning IP address of the range."
        ::= { hh3cIPsecTrafficV2Entry 3 }

    hh3cIPsecTrafficLocalAddr2TypeV2 OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the second IP address specification for the local peer's
             traffic."
        ::= { hh3cIPsecTrafficV2Entry 4 }

    hh3cIPsecTrafficLocalAddr2V2 OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second IP address specification of the local peer's traffic.

            If the local peer's traffic type is single IP address, this is the
            IP address.

            If the local peer's traffic type is IP subnet, this is the subnet mask.

            If the local peer's traffic type is IP address range, this is the
            ending IP address of the range."
        ::= { hh3cIPsecTrafficV2Entry 5 }

    hh3cIPsecTrafficLocalProtocol1V2 OBJECT-TYPE
        SYNTAX Integer32 (0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first protocol number specification of the local peer's traffic.

            If the protocol type of the local peer's traffic is single protocol,
            this is the protocol number.

            If the protocol type of the local peer's traffic is protocol range,
            this is the beginning protocol number of the range."
        ::= { hh3cIPsecTrafficV2Entry 6 }

    hh3cIPsecTrafficLocalProtocol2V2 OBJECT-TYPE
        SYNTAX Integer32 (0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second protocol number specification of the local peer's traffic.

            If the protocol type of the local peer's traffic is single protocol,
            this is the protocol number.

            If the protocol type of the local peer's traffic is protocol range,
            this is the ending protocol number of the range."
        ::= { hh3cIPsecTrafficV2Entry 7 }

    hh3cIPsecTrafficLocalPort1V2 OBJECT-TYPE
        SYNTAX Integer32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first port number specification of the local peer's traffic.

            If the port type of the local peer's traffic is single port, this is
            the port number.

            If the port type of the local peer's traffic is port range, this is
            the beginning port number of the range."
        ::= { hh3cIPsecTrafficV2Entry 8 }

    hh3cIPsecTrafficLocalPort2V2 OBJECT-TYPE
        SYNTAX Integer32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second port number specification of the local peer's traffic.

            If the port type of the local peer's traffic is single port, this is
            the port number.

            If the port type of the local peer's traffic is port range, this is
            the ending port number of the range."
        ::= { hh3cIPsecTrafficV2Entry 9 }

    hh3cIPsecTrafficRemoteTypeV2 OBJECT-TYPE
        SYNTAX Hh3cIPsecTrafficTypeV2
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the remote peer's traffic.  Possible values are:
            1) A single IP address
            2) An IP address range
            3) An IP subnet"
        ::= { hh3cIPsecTrafficV2Entry 10 }

    hh3cIPsecTrafficRemAddr1TypeV2 OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the first IP address specification for the remote peer's
             traffic."
        ::= { hh3cIPsecTrafficV2Entry 11 }

    hh3cIPsecTrafficRemAddr1V2 OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first IP address specification of the remote peer's traffic.

            If the remote traffic type is single IP address, this is the IP address.

            If the remote traffic type is IP subnet, this is the subnet address.

            If the remote traffic type is IP address range, this is the beginning
            IP address of the range."
        ::= { hh3cIPsecTrafficV2Entry 12 }

    hh3cIPsecTrafficRemAddr2TypeV2 OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The type of the second IP address specification for the remote peer's
             traffic."
        ::= { hh3cIPsecTrafficV2Entry 13 }

    hh3cIPsecTrafficRemAddr2V2 OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second IP address specification of the remote peer's traffic.

            If the remote traffic type is single IP address, this is the IP address.

            If the remote traffic type is IP subnet, this is the subnet mask.

            If the remote traffic type is IP address range, this is the ending IP
            address of the range."
        ::= { hh3cIPsecTrafficV2Entry 14 }

    hh3cIPsecTrafficRemoPro1V2 OBJECT-TYPE
        SYNTAX Integer32 (0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first protocol number specification of the remote peer's traffic.

            If the protocol type of the remote peer's traffic is single protocol,
            this is the protocol number.

            If the protocol type of the remote peer's traffic is protocol range,
            this is the beginning protocol number of the range."
        ::= { hh3cIPsecTrafficV2Entry 15 }

    hh3cIPsecTrafficRemoPro2V2 OBJECT-TYPE
        SYNTAX Integer32 (0..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second protocol number specification of the remote peer's traffic.

            If the protocol type of the remote peer's traffic is single protocol,
            this is the protocol number.

            If the protocol type of the remote peer's traffic is protocol range,
            this is the ending protocol number of the range."
        ::= { hh3cIPsecTrafficV2Entry 16 }

    hh3cIPsecTrafficRemPort1V2 OBJECT-TYPE
        SYNTAX Integer32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The first port number specification of the remote peer's traffic.

            If the port type of the remote peer's traffic is single port,
            this is the port number.

            If the port type of the remote peer's traffic is port range,
            this is the beginning port number of the range."
        ::= { hh3cIPsecTrafficV2Entry 17 }

    hh3cIPsecTrafficRemPort2V2 OBJECT-TYPE
        SYNTAX Integer32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The second port number specification of the remote peer's traffic.

            If the port type of the remote peer's traffic is single port,
            this is the port number.

            If the port type of the remote peer's traffic is port range,
            this is the ending port number of the range."
        ::= { hh3cIPsecTrafficV2Entry 18 }

-- ===============================================
-- Begin the hh3cIPsecGlobalStatsV2.
-- ===============================================

    hh3cIPsecGlobalStatsV2 OBJECT IDENTIFIER ::= { hh3cIPsecObjectsV2 6 }

    hh3cIPsecGlobalActiveTunnelsV2 OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of currently active IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 1 }

    hh3cIPsecGlobalActiveSasV2 OBJECT-TYPE
        SYNTAX Gauge32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of currently active or expiring IPsec Phase-2 SA."
        ::= { hh3cIPsecGlobalStatsV2 2 }

    hh3cIPsecGlobalInOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of octets received by all current and previous
             IPsec Phase-2 Tunnels.  This value is accumulated BEFORE determining
             whether or not the packet should be decompressed."
        ::= { hh3cIPsecGlobalStatsV2 3 }

    hh3cIPsecGlobalInDecompOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of decompressed octets received by all current
             and previous IPsec Phase-2 Tunnels.  This value is accumulated
             AFTER the packet is decompressed."
        ::= { hh3cIPsecGlobalStatsV2 4 }

    hh3cIPsecGlobalInPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets received by all current and
             previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 5 }

    hh3cIPsecGlobalInDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped during receiving
             process by all current and previous IPsec Phase-2
             Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 6 }

    hh3cIPsecGlobalInReplayDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped during receiving
             process due to Anti-Replay process by all
             current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 7 }

    hh3cIPsecGlobalInAuthFailsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of inbound authentication's which ended
             in failure by all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 8 }

    hh3cIPsecGlobalInDecryptFailsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of inbound decryption's which ended in
             failure by all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 9 }

    hh3cIPsecGlobalOutOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of octets sent by all current and previous
             IPsec Phase-2 Tunnels.  This value is accumulated AFTER
             determining whether or not the packet should be compressed."
        ::= { hh3cIPsecGlobalStatsV2 10 }

    hh3cIPsecGlobalOutUncompOctetsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of uncompressed octets sent by all current
             and previous IPsec Phase-2 Tunnels.  This value is accumulated
             BEFORE the packet is compressed."
        ::= { hh3cIPsecGlobalStatsV2 11 }

    hh3cIPsecGlobalOutPktsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets sent by all current and previous
             IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 12 }

    hh3cIPsecGlobalOutDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped during sending process
             by all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 13 }

    hh3cIPsecGlobalOutEncryptFailsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of outbound encryption's which ended in failure
             by all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 14 }

    hh3cIPsecGlobalNoMemoryDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to no enough memory
             by all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 15 }

    hh3cIPsecGlobalNoFindSaDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to not find SA by
             all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 16 }

    hh3cIPsecGlobalQueueFullDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to queue full by
             all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 17 }

    hh3cIPsecGlobalInvalidLenDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to invalid packet
             length by all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 18 }

    hh3cIPsecGlobalTooLongDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to too long packet by
             all current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 19 }

    hh3cIPsecGlobalInvalidSaDropsV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped due to invalid SA by all
             current and previous IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecGlobalStatsV2 20 }

-- ===============================================
-- Begin the hh3cIPsecTrapObjectV2.
-- ===============================================

    hh3cIPsecTrapObjectV2 OBJECT IDENTIFIER ::= { hh3cIPsecObjectsV2 7 }

    hh3cIPsecPolicyNameV2 OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(1..63))
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The IPsec policy name with a trap."
        ::= { hh3cIPsecTrapObjectV2 1 }

    hh3cIPsecPolicySeqNumV2 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The IPsec policy sequence number with a trap."
        ::= { hh3cIPsecTrapObjectV2 2 }

    hh3cIPsecPolicySizeV2 OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The number of IPsec policies with a trap."
        ::= { hh3cIPsecTrapObjectV2 3 }

-- ===============================================
-- Begin the hh3cIPsecTrapCntlV2.
-- ===============================================


    hh3cIPsecTrapCntlV2 OBJECT IDENTIFIER ::= { hh3cIPsecObjectsV2 8 }

    hh3cIPsecTrapGlobalCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether all IPsec traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 1 }

    hh3cIPsecTunnelStartTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecTunnelStartV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 2 }

    hh3cIPsecTunnelStopTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecTunnelStopV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 3 }

    hh3cIPsecNoSaTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecNoSaFailureV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 4 }

    hh3cIPsecAuthFailureTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecAuthFailFailureV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 5 }

    hh3cIPsecEncryFailureTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecEncryFailFailureV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 6 }

    hh3cIPsecDecryFailureTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecDecryFailFailureV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 7 }

    hh3cIPsecInvalidSaTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecInvalidSaFailureV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 8 }

    hh3cIPsecPolicyAddTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecPolicyAddV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 9 }

    hh3cIPsecPolicyDelTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecPolicyDelV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 10 }

    hh3cIPsecPolicyAttachTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecPolicyAttachV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 11 }

    hh3cIPsecPolicyDetachTrapCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecPolicyDetachV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 12 }

    hh3cIPsecConnectionStartCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecConnectionStartV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 13 }

    hh3cIPsecConnectionStopCntlV2 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Indicates whether hh3cIPsecConnectionStopV2 traps should be generated."
        ::= { hh3cIPsecTrapCntlV2 14 }

-- ===============================================
-- definition of traps.
-- ===============================================

    hh3cIPsecTrapV2 OBJECT IDENTIFIER ::= { hh3cIPsecObjectsV2 9 }

    hh3cIPsecNotificationsV2 OBJECT IDENTIFIER ::= { hh3cIPsecTrapV2 0 }

    hh3cIPsecTunnelStartV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2,
                    hh3cIPsecTunLifeTimeV2,
                    hh3cIPsecTunLifeSizeV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec Phase-2
             Tunnel is created."
        ::= { hh3cIPsecNotificationsV2 1 }

    hh3cIPsecTunnelStopV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2,
                    hh3cIPsecTunActiveTimeV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec Phase-2
             Tunnel is deleted."
        ::= { hh3cIPsecNotificationsV2 2 }

    hh3cIPsecNoSaFailureV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec Phase-2
             non-existent SA error occurs."
        ::= { hh3cIPsecNotificationsV2 3 }

    hh3cIPsecAuthFailFailureV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2
                  }
        STATUS     current
        DESCRIPTION
            "This notification is generated when the IPsec phase-2
             authentication failure occurs."
        ::= { hh3cIPsecNotificationsV2 4 }

    hh3cIPsecEncryFailFailureV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when the IPsec phase-2
             tunnel has an encrypting failure."
        ::= { hh3cIPsecNotificationsV2 5 }

    hh3cIPsecDecryFailFailureV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when the IPsec phase-2
             tunnel has a decrypting failure."
        ::= { hh3cIPsecNotificationsV2 6 }

    hh3cIPsecInvalidSaFailureV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecTunIndexV2,
                    hh3cIPsecSaIndexV2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2,
                    hh3cIPsecSaSpiValueV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when the IPsec phase-2
             invalid SA failure occurs."
        ::= { hh3cIPsecNotificationsV2 7 }

    hh3cIPsecPolicyAddV2 NOTIFICATION-TYPE
        OBJECTS { hh3cIPsecPolicyNameV2,
                  hh3cIPsecPolicySeqNumV2,
                  hh3cIPsecPolicySizeV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec policy is added."
        ::= { hh3cIPsecNotificationsV2 8 }

    hh3cIPsecPolicyDelV2 NOTIFICATION-TYPE
        OBJECTS { hh3cIPsecPolicyNameV2,
                  hh3cIPsecPolicySeqNumV2,
                  hh3cIPsecPolicySizeV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec policy is deleted."
        ::= { hh3cIPsecNotificationsV2 9 }

    hh3cIPsecPolicyAttachV2 NOTIFICATION-TYPE
        OBJECTS { hh3cIPsecPolicyNameV2,
                  hh3cIPsecPolicySizeV2,
                  ifIndex
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec policy is attached
             with one interface."
        ::= { hh3cIPsecNotificationsV2 10 }

    hh3cIPsecPolicyDetachV2 NOTIFICATION-TYPE
        OBJECTS { hh3cIPsecPolicyNameV2,
                  hh3cIPsecPolicySizeV2,
                  ifIndex
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec policy is detached
             with one interface."
        ::= { hh3cIPsecNotificationsV2 11 }

    hh3cIPsecConnectionStartV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecPolicyDescripV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec connection
             is created."
        ::= { hh3cIPsecNotificationsV2 12 }

    hh3cIPsecConnectionStopV2 NOTIFICATION-TYPE
        OBJECTS {
                    hh3cIPsecPolicyDescripV2
                }
        STATUS     current
        DESCRIPTION
            "This notification is generated when an IPsec connection
             is terminated."
        ::= { hh3cIPsecNotificationsV2 13 }

-- ===============================================
-- Begin the table of hh3cIPsecTunnelStatByDescripV2Table.
-- ===============================================

    hh3cIPsecTunnelStatByDescripV2Table OBJECT-TYPE
        SYNTAX SEQUENCE OF Hh3cIPsecTunnelStatByDescripV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table contains IPsec phase-2 tunnel statistics by description."
        ::= { hh3cIPsecObjectsV2 10 }

    hh3cIPsecTunnelStatByDescripV2Entry OBJECT-TYPE
        SYNTAX Hh3cIPsecTunnelStatByDescripV2Entry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry of IPsec phase-2 tunnels statistics by description table."
        INDEX { hh3cIPsecPolicyDescripV2 }
        ::= { hh3cIPsecTunnelStatByDescripV2Table 1 }

    Hh3cIPsecTunnelStatByDescripV2Entry ::=
        SEQUENCE {
            hh3cIPsecPolicyDescripV2
                OCTET STRING,
            hh3cIPsecTunInOctetsByDescripV2
                Counter64,
            hh3cIPsecTunInDecompOctetsByDescripV2
                Counter64,
            hh3cIPsecTunInPktsByDescripV2
                Counter64,
            hh3cIPsecTunInDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunInReplayDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunInAuthFailsByDescripV2
                Counter64,
            hh3cIPsecTunInDecryptFailsByDescripV2
                Counter64,
            hh3cIPsecTunOutOctetsByDescripV2
                Counter64,
            hh3cIPsecTunOutUncompOctetsByDescripV2
                Counter64,
            hh3cIPsecTunOutPktsByDescripV2
                Counter64,
            hh3cIPsecTunOutDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunOutEncryptFailsByDescripV2
                Counter64,
            hh3cIPsecTunNoMemoryDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunQueueFullDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunInvalidLenDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunTooLongDropPktsByDescripV2
                Counter64,
            hh3cIPsecTunInvalidSaDropPktsByDescripV2
                Counter64
        }

    hh3cIPsecPolicyDescripV2 OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(1..80))
        MAX-ACCESS accessible-for-notify
        STATUS current
        DESCRIPTION
            "The IPsec policy's description."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 1 }

    hh3cIPsecTunInOctetsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of octets received by IPsec phase-2 tunnels.
             This value is accumulated BEFORE determining whether or not the
             packet should be decompressed."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 2 }

    hh3cIPsecTunInDecompOctetsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of decompressed octets received by IPsec
             phase-2 tunnels.  This value is accumulated AFTER the packet
             is decompressed."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 3 }

    hh3cIPsecTunInPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets received by IPsec phase-2 tunnels."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 4 }

    hh3cIPsecTunInDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by IPsec phase-2 tunnels during receiving process."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 5 }

    hh3cIPsecTunInReplayDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of receive  packets dropped by IPsec phase-2 tunnels
            due to Anti-Replay processing."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 6 }

    hh3cIPsecTunInAuthFailsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of inbound authentication
             failures on IPsec phase-2 tunnels."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 7 }

    hh3cIPsecTunInDecryptFailsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of inbound decryption
             failures on IPsec phase-2 tunnels."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 8 }

    hh3cIPsecTunOutOctetsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of octets sent by IPsec phase-2 tunnels.
             This value is accumulated AFTER determining whether or not
             the packet should be compressed."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 9 }

    hh3cIPsecTunOutUncompOctetsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of uncompressed octets sent by IPsec phase-2
             tunnels.  This value is accumulated BEFORE the packet is compressed."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 10 }

    hh3cIPsecTunOutPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets sent by IPsec phase-2 tunnels."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 11 }

    hh3cIPsecTunOutDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by IPsec phase-2 tunnels during sending process."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 12 }

    hh3cIPsecTunOutEncryptFailsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of outbound encryption failures
             on IPsec Phase-2 Tunnels."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 13 }

    hh3cIPsecTunNoMemoryDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by IPsec phase-2 tunnels due to no enough memory."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 14 }

    hh3cIPsecTunQueueFullDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by
             IPsec phase-2 tunnels due to queue full."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 15 }

    hh3cIPsecTunInvalidLenDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by IPsec phase-2 tunnels due to invalid length packet."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 16 }

    hh3cIPsecTunTooLongDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by IPsec phase-2 tunnels due to packet."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 17 }

    hh3cIPsecTunInvalidSaDropPktsByDescripV2 OBJECT-TYPE
        SYNTAX Counter64
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The total number of packets dropped by IPsec phase-2 tunnels due to invalid SA."
        ::= { hh3cIPsecTunnelStatByDescripV2Entry 18 }

-- ===============================================
-- Conformance Information
-- ===============================================
    hh3cIPsecConformanceV2   OBJECT IDENTIFIER
        ::= { hh3cIPsecMonitorV2 2 }
    hh3cIPsecCompliancesV2   OBJECT IDENTIFIER
        ::= { hh3cIPsecConformanceV2 1 }
    hh3cIPsecGroupsV2        OBJECT IDENTIFIER
        ::= { hh3cIPsecConformanceV2 2 }

-- ===============================================
-- Compliance Statements
-- ===============================================
    hh3cIPsecComplianceV2 MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            " "
        MODULE -- this module
        MANDATORY-GROUPS
            {
                hh3cIPsecScalarObjectsGroupV2,
                hh3cIPsecTunnelTableGroupV2,
                hh3cIPsecTunnelStatGroupV2,
                hh3cIPsecSaGroupV2,
                hh3cIPsecTrafficTableGroupV2,
                hh3cIPsecGlobalStatsGroupV2,
                hh3cIPsecTrapObjectGroupV2,
                hh3cIPsecTrapCntlGroupV2,
                hh3cIPsecTrapGroupV2
            }
        ::= { hh3cIPsecCompliancesV2 1 }

    hh3cIPsecScalarObjectsGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecMIBVersion
                }
        STATUS current
        DESCRIPTION
            "The group contains all of scalar objects of the MIB."
        ::= { hh3cIPsecGroupsV2 1 }

    hh3cIPsecTunnelTableGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecTunIfIndexV2,
                    hh3cIPsecTunIKETunnelIndexV2,
                    hh3cIPsecTunIKETunLocalIDTypeV2,
                    hh3cIPsecTunIKETunLocalIDVal1V2,
                    hh3cIPsecTunIKETunLocalIDVal2V2,
                    hh3cIPsecTunIKETunRemoteIDTypeV2,
                    hh3cIPsecTunIKETunRemoteIDVal1V2,
                    hh3cIPsecTunIKETunRemoteIDVal2V2,
                    hh3cIPsecTunLocalAddrTypeV2,
                    hh3cIPsecTunLocalAddrV2,
                    hh3cIPsecTunRemoteAddrTypeV2,
                    hh3cIPsecTunRemoteAddrV2,
                    hh3cIPsecTunKeyTypeV2,
                    hh3cIPsecTunEncapModeV2,
                    hh3cIPsecTunInitiatorV2,
                    hh3cIPsecTunLifeSizeV2,
                    hh3cIPsecTunLifeTimeV2,
                    hh3cIPsecTunRemainTimeV2,
                    hh3cIPsecTunActiveTimeV2,
                    hh3cIPsecTunRemainSizeV2,
                    hh3cIPsecTunTotalRefreshesV2,
                    hh3cIPsecTunCurrentSaInstancesV2,
                    hh3cIPsecTunInSaEncryptAlgoV2,
                    hh3cIPsecTunInSaAhAuthAlgoV2,
                    hh3cIPsecTunInSaEspAuthAlgoV2,
                    hh3cIPsecTunDiffHellmanGrpV2,
                    hh3cIPsecTunOutSaEncryptAlgoV2,
                    hh3cIPsecTunOutSaAhAuthAlgoV2,
                    hh3cIPsecTunOutSaEspAuthAlgoV2,
                    hh3cIPsecTunPolicyNameV2,
                    hh3cIPsecTunPolicyNumV2,
                    hh3cIPsecTunStatusV2,
                    hh3cIPsecTunPolicyDescriptionV2,
                    hh3cIPsecTunIKETunLocalIDVal3V2,
                    hh3cIPsecTunIKETunRemoteIDVal3V2
                }
        STATUS current
        DESCRIPTION
            "The group contains the IPsec tunnel's property information."
        ::= { hh3cIPsecGroupsV2 2 }

    hh3cIPsecTunnelStatGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecTunInOctetsV2,
                    hh3cIPsecTunInDecompOctetsV2,
                    hh3cIPsecTunInPktsV2,
                    hh3cIPsecTunInDropPktsV2,
                    hh3cIPsecTunInReplayDropPktsV2,
                    hh3cIPsecTunInAuthFailsV2,
                    hh3cIPsecTunInDecryptFailsV2,
                    hh3cIPsecTunOutOctetsV2,
                    hh3cIPsecTunOutUncompOctetsV2,
                    hh3cIPsecTunOutPktsV2,
                    hh3cIPsecTunOutDropPktsV2,
                    hh3cIPsecTunOutEncryptFailsV2,
                    hh3cIPsecTunNoMemoryDropPktsV2,
                    hh3cIPsecTunQueueFullDropPktsV2,
                    hh3cIPsecTunInvalidLenDropPktsV2,
                    hh3cIPsecTunTooLongDropPktsV2,
                    hh3cIPsecTunInvalidSaDropPktsV2
                }
        STATUS current
        DESCRIPTION
            "The group contains the IPsec tunnel's statistic information."
        ::= { hh3cIPsecGroupsV2 3 }

    hh3cIPsecSaGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecSaDirectionV2,
                    hh3cIPsecSaSpiValueV2,
                    hh3cIPsecSaSecProtocolV2,
                    hh3cIPsecSaEncryptAlgoV2,
                    hh3cIPsecSaAuthAlgoV2,
                    hh3cIPsecSaStatusV2
                }
        STATUS current
        DESCRIPTION
            "The group contains the SA's property information."
        ::= { hh3cIPsecGroupsV2 4 }

    hh3cIPsecTrafficTableGroupV2 OBJECT-GROUP
        OBJECTS {
            hh3cIPsecTrafficLocalTypeV2,
            hh3cIPsecTrafficLocalAddr1TypeV2,
            hh3cIPsecTrafficLocalAddr1V2,
            hh3cIPsecTrafficLocalAddr2TypeV2,
            hh3cIPsecTrafficLocalAddr2V2,
            hh3cIPsecTrafficLocalProtocol1V2,
            hh3cIPsecTrafficLocalProtocol2V2,
            hh3cIPsecTrafficLocalPort1V2,
            hh3cIPsecTrafficLocalPort2V2,
            hh3cIPsecTrafficRemoteTypeV2,
            hh3cIPsecTrafficRemAddr1TypeV2,
            hh3cIPsecTrafficRemAddr1V2,
            hh3cIPsecTrafficRemAddr2TypeV2,
            hh3cIPsecTrafficRemAddr2V2,
            hh3cIPsecTrafficRemoPro1V2,
            hh3cIPsecTrafficRemoPro2V2,
            hh3cIPsecTrafficRemPort1V2,
            hh3cIPsecTrafficRemPort2V2
        }
        STATUS current
        DESCRIPTION
            "The group contains the property information of the
             data flow protected by IPsec tunnel."
        ::= { hh3cIPsecGroupsV2 5 }

    hh3cIPsecGlobalStatsGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecGlobalActiveTunnelsV2,
                    hh3cIPsecGlobalActiveSasV2,
                    hh3cIPsecGlobalInOctetsV2,
                    hh3cIPsecGlobalInDecompOctetsV2,
                    hh3cIPsecGlobalInPktsV2,
                    hh3cIPsecGlobalInDropsV2,
                    hh3cIPsecGlobalInReplayDropsV2,
                    hh3cIPsecGlobalInAuthFailsV2,
                    hh3cIPsecGlobalInDecryptFailsV2,
                    hh3cIPsecGlobalOutOctetsV2,
                    hh3cIPsecGlobalOutUncompOctetsV2,
                    hh3cIPsecGlobalOutPktsV2,
                    hh3cIPsecGlobalOutDropsV2,
                    hh3cIPsecGlobalOutEncryptFailsV2,
                    hh3cIPsecGlobalNoMemoryDropsV2,
                    hh3cIPsecGlobalNoFindSaDropsV2,
                    hh3cIPsecGlobalQueueFullDropsV2,
                    hh3cIPsecGlobalInvalidLenDropsV2,
                    hh3cIPsecGlobalTooLongDropsV2,
                    hh3cIPsecGlobalInvalidSaDropsV2
                }
        STATUS current
        DESCRIPTION
            "The group contains all of the IPsec tunnel's statistic
             information."
        ::= { hh3cIPsecGroupsV2 6 }

    hh3cIPsecTrapObjectGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecPolicyNameV2,
                    hh3cIPsecPolicySeqNumV2,
                    hh3cIPsecPolicySizeV2
                }
        STATUS current
        DESCRIPTION
            "The group contains all of trap objects of IPsec tunnels."
        ::= { hh3cIPsecGroupsV2 7 }

    hh3cIPsecTrapCntlGroupV2 OBJECT-GROUP
        OBJECTS {
                    hh3cIPsecTrapGlobalCntlV2,
                    hh3cIPsecTunnelStartTrapCntlV2,
                    hh3cIPsecTunnelStopTrapCntlV2,
                    hh3cIPsecNoSaTrapCntlV2,
                    hh3cIPsecAuthFailureTrapCntlV2,
                    hh3cIPsecEncryFailureTrapCntlV2,
                    hh3cIPsecDecryFailureTrapCntlV2,
                    hh3cIPsecInvalidSaTrapCntlV2,
                    hh3cIPsecPolicyAddTrapCntlV2,
                    hh3cIPsecPolicyDelTrapCntlV2,
                    hh3cIPsecPolicyAttachTrapCntlV2,
                    hh3cIPsecPolicyDetachTrapCntlV2
                }
        STATUS current
        DESCRIPTION
            "The group contains all of trap switches of IPsec tunnels."
        ::= { hh3cIPsecGroupsV2 8 }

    hh3cIPsecTrapGroupV2 NOTIFICATION-GROUP
        NOTIFICATIONS {
                          hh3cIPsecTunnelStartV2,
                          hh3cIPsecTunnelStopV2,
                          hh3cIPsecNoSaFailureV2,
                          hh3cIPsecAuthFailFailureV2,
                          hh3cIPsecEncryFailFailureV2,
                          hh3cIPsecDecryFailFailureV2,
                          hh3cIPsecInvalidSaFailureV2,
                          hh3cIPsecPolicyAddV2,
                          hh3cIPsecPolicyDelV2,
                          hh3cIPsecPolicyAttachV2,
                          hh3cIPsecPolicyDetachV2,
                          hh3cIPsecConnectionStartV2,
                          hh3cIPsecConnectionStopV2
                      }
        STATUS current
        DESCRIPTION
            "The group contains all of trap of IPsec tunnels."
        ::= { hh3cIPsecGroupsV2 9 }


END